United States
Environmental Protection
Agency
Solid Waste and
Emergency Response
(5306W)
EPA530-F-01-006
June 2001
http://www.epa.gov/epr
&EPA
Electronics:
A New Opportunity for
Waste Prevention, Reuse,
and Recycling
In the past decade, technological advances in electronic data management and
communications have spurred economic growth and improved people's lives in
—~countless ways. However, our growing dependence on electronic products both at home
and in the workplace has given rise to a new environmental challenge: electronics waste.
A recent study by EPA shows that electronics already make up approximately 1 percent
of the municipal solid waste stream. Research completed in Europe shows that electronics
waste is growing at three times the rate of other municipal waste. To the extent possible,
electronics waste should be prevented, and older electronics should be reused and recycled.
Why Prevent Electronics Waste?
End-of-life electronics:
Are a fast-growing waste stream.
Over 20 million personal computers became
obsolete in 1998. Only 13 percent were reused
or recycled. Many municipalities are facing the
dilemma of what to do with growing amounts of
retired electronics. Rapid changes in computer
technology and the emergence of new
electronic gadgets exacerbate the problem.
Can contain hazardous materials. There are
hazardous materials, such as lead, mercury, and
hexavalent chromium, in circuit boards, batteries,
and color cathode ray tubes (CRTs). Televisions
and CRT monitors contain four pounds of lead,
on average (the exact amount depends on size
and make). Mercury from electronics has been
cited as a leading source of mercury in municipal
waste. In addition, brominated flame retardants
are commonly added to plastics used in electronics. If improperly handled, these toxics can
be released into the environment through incinerator ash or landfill leachate.
Are made with valuable materials. In 1998, over 112 million pounds of materials were
recovered from electronics, including steel, glass, and plastic, as well as precious metals.
Reusing and recycling the raw materials from end-of-life electronics conserves natural
resources and avoids the air and water pollution, as well as greenhouse gas emissions,
that are caused by manufacturing new products.
How To Reduce Electronics Waste
This fact sheet provides information on ways you can reduce the environmental impact
of electronics use and disposal through reuse, donation, recycling, and buying greener
electronic products.
What products are
considered consumer
electronics?
Televisions and Monitors
Computers
Computer Peripherals
Audio/Stereo Equipment
VCRs
DVD Players
Video Cameras
Telephones
Fax and Copying Machines
Cellular Phones
Wireless Devices
Video Game Consoles
-------
Reusing and
Donating Electronics
Preventing waste in the first
place is usually preferable to any
waste management option...including recycling. Donating
electronics for reuse extends the lives of valuable products
and keeps them out of the waste management system for a
longer time. Reuse, in addition to being an environmentally
preferable alternative, also benefits society. By donating your
used electronics, you allow schools, non-profit organizations,
and lower-income families to use equipment that they
otherwise could not afford.
As a household or a business, you may be able to take
advantage of tax incentives for computer equipment donations.
The 21st Century Classrooms Act for Private Technology
Investment encourages large companies to donate computer
equipment to public and private schools. When donating
equipment to a non-profit organization, inquire about
documentation that can be applied toward your income
tax return.
Before donating your computer or other electronics, make
sure the equipment is reusable. Donation organizations have
limited resources and employees to diagnose and repair
hardware. A functional, working system, especially with
monitor, wiring, and software licenses, is a lot more
useful and requires less upgrading than a non-working,
incomplete computer. Check to see what the donation
organization's minimum computer requirements are.
Donation organizations may not accept (or may
charge a fee for) older, less useful equipment.
The most appropriate donation organization to handle a
computer can vary from area to area. In some cases, the
most viable donation organization may be a charity, but in
other areas, the appropriate donation organization may be
the local school district or materials exchange.
Recycling Electronics
If donation for reuse or repair is not a viable option,
households and businesses can send their used electronics
for recycling. Recycling electronics avoids pollution and the
need to extract valuable and limited virgin resources. It also
reduces the energy used in new product manufacturing.
A growing number of municipalities are offering computer
and electronics collections as part of household hazardous
waste collections or special events. In addition, public and
private organizations have emerged that accept computers
and other electronics for recycling. Depending on where you
live and the amount of equipment you have, the best
Where can I donate my computer?
The following are just a few examples of organizations
that can provide additional information on donating
electronics.
Goodwill Industries
www.goodwill.org
Many Goodwills accept computer donations. Donations
to Goodwill help individuals with disabilities and other
disadvantages upgrade their job skills and enter the
workforce.
Students Recycling Used Technology (StRUT)
www.strut.org
The StRUT program teaches students to evaluate
and repair donated computer equipment, which is
then contributed to local schools. Founded in Oregon,
StRUT has since expanded to other states (AZ, CA,
MA, NM, OR, TX, and WA). Call (503) 251-3771 to
ask about a site near you.
Learning and Information Networking for
Community via Technology (LINCT)
www.linct.org
Using computers donated by businesses, LINCT
provides computer training, teaches individuals to
refurbish computers, and allows them to earn
computers through community service.
Materials Exchanges
www. epa. gov/jtr/comm/exchange. htm
Many materials exchanges accept electronics.
The Southern Waste Information Exchange (SWIX)
has developed a materials exchange specifically for
electronics at www.ElectronicXchange.org
Reuse Development Organization (ReDO)
www.redo.org
ReDO is a non-profit organization that promotes
reuse of discarded and surplus materials, including
electronics. ReDo provides education, training, and
technical assistance to help start up and operate
reuse programs.
recycling option may be a county recycling drop-off center,
TV repair shop, charitable organization, electronics recycling
company, or even your local electronics retailer, which may
collect used products and send them to a recycler.
Some electronics manufacturers are accepting household
electronics for recycling. In some cases, these services are
provided free-of-charge. Asset management and recovery
programs have been available to major corporations and
large purchasers of electronic equipment for quite some
time. Now, electronics manufacturers are beginning to
offer similar services for households and small businesses.
-------
Where can I take my computer?
To find an electronics recycling organization near you,
visit the following web sites:
El A Consumer Education Initiative (CEI)
www.eiae.org
The Electronic Industries Alliance (EIA) has
developed the Consumer Education Initiative web
site to help households and small businesses find
environmentally responsible options for donating and
recycling electronics in their community.
International Association of Electronics
Recyclers (IAER) www.iaer.org/search
IAER has an online directory of electronics recyclers.
This database is ideal for large organizations that are
looking for a company to handle used electronics.
The IAER web site also has information on
electronics recycling news and industry events.
Buying Green
Environmentally responsible electronics use involves not
only proper end-of-life disposition of obsolete equipment, but
also purchasing new equipment that has been designed with
environmental attributes. Think about this when purchasing
new equipment, and ask your retailer or electronics supplier
about environmentally preferable electronics. Households,
companies, and governmental organizations can encourage
electronics manufacturers to design greener electronics
by purchasing computers and other electronics with
environmentally preferable attributes and by requesting
takeback options at the time of purchase.
Look for electronics that:
XI
• Are made with fewer toxic constituents
• Use recycled content
• Are energy efficient (e.g., showing the
"Energy Star" label)
• Are designed for easy upgrading or disassembly
• Utilize minimal packaging
• Offer leasing or takeback options
• Have been recognized by independent certification
groups (such as the Swedish TCO or Blue Angel)
as environmentally preferable.
The National Recycling Coalition has assembled information
on environmentally preferable procurement of electronics on
their web site, at:
www. nrc-recycle. org/Programs/electronics/index. htm
The Northwest Product Stewardship Council has developed a
Guide to Environmentally Preferable Computer Purchasing,
available at: www.govlink.org/mvpsc
What EPA Is Doing To Encourage Reuse/
Recycling/ and Greener Purchasing of
Electronics
EPA's goal is to promote greater product stewardship of
electronics. Product stewardship means that all who make,
distribute, use, and dispose of products share responsibility
for reducing the environmental impact of those products.
We intend to work towards this goal in three ways:
1) increase reuse and recycling of used electronics, 2) ensure
that management of electronics is safe and environmentally
sound, and 3) foster a life-cycle approach to product steward-
ship, including environmentally conscious design, manufactur-
ing, and toxics reduction for new electronic products. EPA is
currently working with stakeholders in both the public and
private sectors to meet these goals. In support of these efforts,
EPA will be looking to streamline regulations and policies. We
aim to make it easier and more cost-effective for consumers,
retailers, recyclers, manufacturers, and governments at all
levels to help divert these products into environmentally sound
reuse and recycling, as well as reduce the environmental
footprint of electronic product use.
In addition, EPA's Design for the Environment Program
(www.epa.gov/dfe) is working with electronics manufacturers
to incorporate environmental considerations into product
design. EPA's Environmentally Preferable Purchasing Program
(www.epa.gov/opptintr/epp) is helping federal agencies in the
purchasing of environmentally preferable products and
services, including electronics. Also, the Energy Star Program
(www.eitergystar.gov) promotes energy-efficient products
through its labeling and education program. EPA's Waste Wise
Program is challenging its almost 1,100 partners to set goals
for reducing electronics waste (www.epa.govAvastewise).
Finally, EPA's Office of Solid Waste is supporting multi-
stakeholder dialogues, collection pilots, public education, and
international cooperation to foster greater awareness and coor-
dination of electronics reuse and recycling issues. For more
information about EPA's efforts to encourage product
ship for electronics, visit www.epa.gov/epr
-------
Useful Publications
Analysis of Five Community Consumer/Residential
Collections: End-of-Life Electronic and Electrical
Equipment (EPA-901-R-98-003)
U.S. EPA Region 1. April 1999.
www. epa.gov/region 01/programs/csifmal.pdf
A study that analyzes five residential collection programs
and provides comparisons of materials collected and cost
considerations.
Electronic Product Recovery and Recycling (EPR2)
Baseline Report: Recycling of Selected Electronic
Products in the United States
National Safety Council. May 1999.
www.nsc.org/ehc/epr2/baseline.htm
A report that provides results of the first ever attempt to
characterize electronics recovery in the United States.
Plastics from Residential Electronics Recycling
Report 2000
American Plastics Council. April 2000.
www.plastics.org/top_level/info.html
This report analyzes the types of plastics found in consumer
electronics and the current technologies available to recycle
these plastics.
End of Life Computer and Electronics Recovery Options
for the Mid-Atlantic States, 2nd Edition
Mid-Atlantic Consortium of Recycling and Economic
Development Officials (MACREDO). March 2000.
www. libertynet. org/macredo/comelc.htm
A regional policy report and general information document on
electronics recovery.
Electronics Reuse and Recycling Infrastructure
Development in Massachusetts (EPA-901-R-00-002)
U.S. EPA Region 1 and Massachusetts Department of
Environmental Protection. September 2000.
www. epa.gov/region 01/compliance/solid/jtrfmalOO.pdf
This report provides a thorough overview of the
Massachusetts infrastructure development program that
was established prior to the state's landfill ban on CRTs and
analyzes various collection options with respect to recovery
rates, cost effectiveness, and job creation.
Recycling Used Electronics:
Report on Minnesota's Demonstration Project
Minnesota Office of Environmental Assistance. April 2001.
www. moea. state, mn. us/plugin/index. cfin
This report analyzes the results of the first large-scale.
multi-stakeholder effort to remove used electronic
products from municipal waste in North America.
WasteWise Update: Electronics Reuse and Recycling
(EPA-530-N-00-007)
U.S. EPA. October 2000.
www.epa.gov/wastewise/pdf/wwupdal4.pdf
A publication that provides an overview of electronics
recovery issues and options for businesses.
Organizations
EPA's Product Stewardship Program
www. epa.gov/epr
EPA's Product Stewardship program encourages more
environmentally sustainable management of a variety of
products, including electronics. Visit the program's web site
for information about electronics stewardship projects that are
occurring across the country.
Electronic Industries Alliance (EIA)
www.eia.org
A trade association for the electronics industry. The EIA web
site maintains information on what member companies are
doing to incorporate environmental attributes into electronic
products.
International Association of Electronics Recyclers (IAER)
www.iaer.org
A non-profit trade organization that supports the electronics
recycling industry. The IAER web site provides information
on industry trends and a database of commercial electronics
recyclers.
National Recycling Coalition (NRC)
www. nrc-recycle. org/Programs/electronics/index. htm
A non-profit group dedicated to advancing recycling and
source reduction. NRC's Electronics Recycling Initiative web
site contains information on procurement and other electronics
recycling issues.
Polymer Alliance Zone (PAZ)
www.pazwv. com
A public-private partnership that is developing a regional
center for electronics recycling in West Virginia. Visit the
PAZ web site to learn more about this innovative project.
Silicon Valley Toxics Coalition (SVTC)
www.svtc.org
A grassroots coalition that performs research and advocacy on
environmental and human health issues related to electronics.
The SVTC web site includes a report on toxics in electronics
waste and an analysis of the environmental performance of
electronics manufacturers based on web site information.
The mention of any company, product, or process in this
publication does not constitute or imply endorsement by
the U.S. Environmental Protection Agency.
------- |