United States
                 Environmental Protection
                 Agency
Office of Solid Waste and
Emergency Response
(5102G)
&EPA      A Citizen's Guide
                to Capping
EPA 542-F-01-022
December 2001
www.epa.gov/superfund/sites
www.cluin.org
  The Citizen's Guide  Series
 EPA uses many methods to clean up pollution at Superfund and other sites. If you live, work, or go to school near
 a Superfund site, you may want to learn more about these methods. Perhaps they are being used or are proposed
 for use at your site. How do they work? Are they safe? This Citizen's Guide is one in a series to help answer your
 questions.
                   What Is  capping?
                   Capping involves placing a cover over contaminated material such as the waste buried at a
                   landfill. Such covers are called "caps." Caps do not clean up the contaminated material. They
                   j ust keep it in place so it will not come into contact with people or the environment.

                   How does it work?

                   Sometimes digging up and removing contaminated material can be difficult or expensive.
                   Instead, a cap will be placed over it to keep it in place. A cap works in three main ways:

                   1)    It stops rainwater from seeping through the hazardous material and carrying the
                        pollution into the groundwater, lakes or rivers.

                   2)    It stops wind from blowing away the hazardous material.

                   3)    It keeps people and animals from coming into contact with the contaminated material
                        and tracking it off the site.
                                          geomembrane
                                                                      grass
                                                                        top soil
                                     ground
                                     surface

-------
For  more
information
write the Technology
Innovation Office at:

U.S.EPA(5102G)
1200 Pennsylvania Ave.,
NW
Washington, DC 20460

or call them at
(703)603-9910.

Further information also
can be obtained at
www.cluin.org or
www.epa.gov/
superfund/sites.
                         Constructing a cap can be as simple as placing a single layer of asphalt on top of the contami-
                         nated material. More often, however, caps are made of several layers. The top layer at the
                         ground surface is usually soil with grass or other plants. Plants take up rainwater with their roots
                         and help prevent it from soaking down into the next layer. They also keep the topsoil from
                         eroding. The second layer down drains any water that comes through the first layer. It is usually
                         constructed of gravel and pipes. A third layer may be added to control gasses that come from
                         the hazardous material. The bottom layer lies directly on the contaminated material. It is usually
                         made of clay. The clay is covered by a sheet of strong synthetic material called a geomem-
                         brane. Together the clay and the geomembrane help stop further flow of water downward.

                         Is capping  safe?

                         When properly built and maintained, a cap is a safe method for keeping contaminated material
                         in place. A cap will continue to work safely as long as it is not broken or eroded. Regular
                         inspections are made to make sure that the weather, plant roots or some human activity have not
                         damaged the cap. Also, groundwater monitoring wells are placed around the edges of the cap
                         so that any leakage from the site can be found and fixed.
                         } How long will it take?
                          Building a cap can take a few days up to several months.

                          The length of time depends on several factors that vary from site to site:
                          •  size of the area
                          •  thickness and design of the cap
                          •  availability of clean topsoil and clay
                          Caps can be effective for many years as long as they are properly maintained
Why  use capping?

Caps have been used at hundreds of sites because they are an effective method for keeping
wastes contained. Caps are usually only part of a cleanup remedy. Often they are used with
pump and treat systems (See^4 Citizen's Guide to Pump and Treat [EPA 542-01-025]). The
pumping and treating cleans up polluted groundwater, while the cap prevents contaminated
materials from reaching the groundwater.
                         NOTE: This fact sheet is intended solely as general guidance and information to the public. It is not intended, nor can it be relied
                         upon, to create any rights enforceable by any party in litigation with the United States, or to endorse the use of products or services
                         provided by specific vendors. The Agency also reserves the right to change this fact sheet at any time without public notice.

-------