United States
                Environmental Protection
                Agency
          Office of Solid Waste and
          Emergency Response
          (5102G)
&EPA      A Citizen's Guide to
                Pump  and  Treat
             EPA 542-F-01-025
             December 2001
             www.epa.gov/superfund/sites
             www.cluin.org	
  The Citizen's Guide Series
  EPA uses many methods to clean up pollution at Superfund and other sites. If you live, work, or go to school near
  a Superfund site, you may want to learn more about these methods. Perhaps they are being used or are proposed
  for use at your site. How do they work? Are they safe? This Citizen's Guide is one in a series to help answer your
  questions.
                  What Is pump  and treat?

                  Pump and treat is a common method for cleaning up groundwater. Pumps are used to bring
                  polluted groundwater to the surface where it can be cleaned up (treated) more easily.

                  Groundwater is the water that has collected underground in the spaces between dirt particles
                  and crack within rocks. Groundwater flows underground and may empty into rivers or lakes.
                  Many people rely on groundwater as the source of their daily water needs.

                  How  does It work?

                  To remove polluted water from underground, an extraction system is built. This system
                  usually consists of one or more wells equipped with pumps. When the pumps are turned on,
                    clean
                    water
water treatment
   system
holding
 tank
                                       ground surface
                                            groundwater
                                                  level

-------
For more
information
write the Technology
Innovation Office at:

U.S.EPA(5102G)
1200 Pennsylvania Ave.,
NW
Washington, DC 20460
or call them at
(703) 603-9910.
Further information also
can be obtained at
www.cluin.org or
www.epa.gov/
superfund/sites.
                         they pull the polluted groundwater into the wells and up to the surface. At the surface, the water
                         goes into a holding tank and then on to a treatment system, where it is cleaned. There are a
                         number of treatment methods which can be used which either to destroy the polluting chemicals
                         or to remove them for proper disposal (see A Citizen's Guide to Air Stripping [EPA 542-F-
                         01-016], A Citizen's Guide to Activated Carbon Treatment [EPA 542-F-01-020],v4
                         Citizen's Guide to Bioremediation [EPA 542-F-01-001], and^4 Citizen's Guide to Chemi-
                         cal Oxidation [EPA 542-F-01-013]). The cleaned water can then be put back into the ground,
                         into a public sewer, or into a pond.

                         In order for pump and treat to be effective, the source of the pollution must first be taken away
                         so that it will not continue to seep into the groundwater. For example, leaking oil drums or tanks
                         must be removed and the surrounding polluted soil must be cleaned up (see^4 Citizen's Guide
                         to Excavation [EPA 542-F-01-023]).

                         Is pump and  treat  safe?

                         Pump and treat is quite safe when designed and operated properly. Since the polluted ground-
                         water is pumped directly into holding tanks and from there into the treatment system, no one
                         comes in contact with any harmful chemicals. The harmful chemicals are destroyed or removed
                         and disposed of properly. The cleaned water is tested to make sure it is safe before it is put
                         back into the ground or into a sewer system. EPA tests the groundwater regularly during the
                         pump and treat process to make sure all of it is being collected and it is not spreading further.
                                                                                              ye-
                                     long will It take?
    A pump and treat cleanup is a relatively slow process. It will
    usually last at least five to ten years, but can last for decades. The
    time it takes depends on:
    • the type and amount of harmful chemicals present
    • the size and depth of the polluted groundwater
    • type of soil and rock rock in the area
Why use  pump and  treat?

Cleaning up polluted water while it is still underground is often very difficult and sometimes not
possible. Pump and treat is the best remedy in such cases. Pump and treat can also be used to
help keep polluted groundwater from spreading into nearby drinking water wells while other
kinds of cleanup actions are being taken. EPA has used pump and treat at over 500 Superfund
sites.
                         NOTE: This fact sheet is intended solely as general guidance and information to the public. It is not intended, nor can it be relied
                         upon, to create any rights enforceable by any party in litigation with the United States, or to endorse the use of products or services
                         provided by specific vendors. The Agency also reserves the right to change this fact sheet at any time without public notice.

-------