United States
Environmental Protection
Agency
Pesticides and
Toxic Substances (7506C)
EPA-73S-F-96-006
September, 1996
Protecting Endangered
Species
Interim Measures
Columbus County, North Carolina
The information in this pamphlet is similar to
what the U.S. Environmental Protection
Agency (EPA) expects to distribute once our
Endangered Species Protection Program is in
effect. The limitations on pesticide use are not
law at this time, but are being provided now for
your use in voluntarily protecting endangered and
threatened species from harm due to pesticide
use. We encourage you to use this information.
We also welcome your comments.
The Endangered Species Act is intended to
protect and promote recovery of animals and
plants that are hi danger of becoming extinct due
to the activities of people. Under the Act, EPA
must ensure that use of pesticides it registers will
not result in harm to the species listed as
endangered or threatened by the U.S. fish and
Wildlife Service, or to habitat critical to those
species' survival. To implement the Endangered
Species Protection Program, labels of certain
pesticides will direct users to bulletins similar to
this sample pamphlet. This program will protect
endangered and threatened species from harm due
to pesticide use.
EPA requests your comments regarding the
information presented in this publication. Please
let us know whether the information is clear and
correct. Also tell us to what extent following the
recommended measures would affect you typical
pesticide use or productivity. This information
will be considered by EPA during the final stages
of program development.
Please submit comments to:
Interim Endangered Species
Protection Program (7506C)
U.S. EPA
401M Street, SW
Washington, DC 20460
Recycled/Recyclable
Printed with Soy/Canola Ink on paper that
contains at least 50% recycled fiber
About This Publication
This publication contains a County Map
showing the Area within the county where
pesticide use should be limited to protect listed
species. These areas are identified on the map by
a shaded pattern. Each shaded pattern
corresponds to a species in need of protection.
The Shading Key shows the name of the species
that each shaded pattern represents and often
describes the shaded area. The area may be
described in terms of Township, Range, and
Section or by giving details about the habitat of
the species.
The first column of the 'Table of Pesticide
Active Ingredients" lists the active ingredients for
which there should be limitations on use to
protect certain species. The next columns are
headed by the shaded pattern of the species with
Codes listed underneath them.
The Code indicates the specific limitation that is
necessary to protect the species. The section titled
Limitations on Pesticide Use explains the code.
Does This Information Apply to You?
To determine whether this information applies
to your use of a pesticide, review the questions
below. The information applies only if you
answer "yes" to both questions:
• Do you intend to use pesticides within or
near the shaded area on the county map?
• Are any of the ingredients listed on the front
panel of your pesticide product label named
in the "Table of Pesticide Active
Ingredients"?
If you answer "yes" to both questions, you
should follow the instructions on "How to Use
This Information" to determine if you should
limit use of the pesticide to help protect listed
species.
If you answer "no" to either question, you
should follow the usage directions on the
pesticide product label.
-------
Columbus County, North Carolina
How To Use This Information
1) On the county map, find the specific shading pattem(s) in or near the area where you intend to apply pesticides.
2) Read the descriptor under the Shading Key for the pattem(s) to identify the specific area involved.
3) In the "Table of Pesticide Active Ingredients," locate the active ingredient in the pesticide you intend to apply.
4) Locate the code to the right of the active ingredient name and under the shading pattern(s) that apply to you.
5) When using the pesticide, find the code(s) described under "Limitations on Pesticide Use" and follow the limitation given.
6) If you are applying more than one listed active ingredient or applying a listed active ingredient in an area with more than
one shading pattern (species), multiple codes may apply. If so, you should follow the most restrictive limitation.
7) Read the information on Reducing Runoff and Drift in this pamphlet.
County Border
County Seat
City, Town
U.S., State or Other
Highway
River, Stream, Creek
Lake, Reservoir
SHADING KEY
Waccamaw silverside (fish), Menidia extensa. The shaded area shown on the map is Lake
Waccamaw and Big Creek from Lake Waccamaw upstream to County Road 1947. Pesticide
use limitations only apply along the lake and creek outward from the edge of the water at the
mean high water level.
-------
Table of Pesticide Active Ingredients
Active Ingredient
Shading Pattern
Active Ingredient
Shading Pattern
Code TAR*
ALDICARB
AZINPHOS-METHYL
BENOMYL
BENSULIDE (granular)
BENSULIDE (non-granular)
CAPTAN
CARBARYL
CARBOFURAN (granular)
CARBOFURAN (non-granular)
CHLOROTHALONIL (granular)
CHLOROTHALONIL (non-granular)
CHLORPYRIFOS
COPPER SULFATE (all salts)
CYPERMETHRIN
Cabbage and Pecans
DIAZINON (granular)
DIAZINON (non-granular)
DICOFOL
DISULFOTON
ENDOSULFAN
ESFENVALERATE
ETHION
ETHOPROP (granular)
ETHOPROP (non-granular)
FENAMIPHOS
FLURIDONE
FONOFOS
ISOFENPHOS (granular)
ISOFENPHOS (non-granular)
296
2x
2x
2a
296
2x
2x
296
2x
296
2x
3w
2x
2a
296
2x
296
2x
2x
2x
2x
296
2a
2x
20a
2x
2a
296
1
—
3
-
„
1.4
0.75
-
—
-
-
0.5
--
0.75
—
-
-
0.5
-
-
..
5
MALATHION
METHIDATHION
METHOMYL (granular)
METHOMYL (non-granular)
METHYL PARATHION
MEVINPHOS
NALED
OXYFLUORFEN (granular)
OXYFLUORFEN (non-granular)
PARATHION (ethyl)
PENDIMETHALIN
PERMETHRIN
PHORATE
PHOSMET
PHOSPHAMIDON
PROFENOFOS
PROPACHLOR (granular)
PROPACHLOR (non-granular)
PROPARGITE
PYRETHRINS
SULPROFOS
TERBUFOS
THIOPHANATE-METHYL (granular)
THIOPHANATE-METHYL (non-granular)
TRALOMETHRIN
TRIBUFOS (DEF)
TRICHLORFON
TRIFLURALIN (granular)
TRIFLURALIN (non-granular)
Code TAR*
2p
2x
2a
296
2x
2x
2x
2a
296
2x
2x
2x
2x
296
296
2x
296
2a
296
2p
296
2x
2a
296
2x
296
2x
296
2x
..
0.75
1.5
0.5
2.5
2.5
1
1.5
0.25
1
0.7
Limitations On Pesticide Use
Codes/Limitations
2a Within the area described under the Shading Key, do not apply this pesticide within 40 yards from the
edge of water for ground applications, nor within 200 yards for aerial applications,
2x Within the area described under the Shading Key and Vz mile up all streams that join the area, do not
apply this pesticide within 40 yards from the edge of water for ground applications, nor within 200
yards for aerial applications.
2p Within the area described under the Shading Key and Vz mile up all streams that join the area, do not
apply this pesticide within 100 yards from the edge of water for ground applications, nor within 1/4 mile
for aerial applications; and do not apply directly to water in these areas.
3w Within the area described under the Shading Key and 2 miles up Big Creek, do not apply this pesticide
within 100 yards from the edge of water for ground applications, nor within 1/4 mile for aerial
applications; and do not apply directly to water in these areas.
20a Within the area described under the Shading Key, do not apply directly to water.
296 Within the area described under the Shading Key, do not apply this pesticide above the threshold
application rate (TAR) indicated within 40 yards from the edge of water for ground applications, nor
within 200 yards for aerial applications.
* TAR = Threshold Application Rate (Pounds of active ingredient per acre per application)
-------
Reducing Runoff and Drift
Careful use of pesticides can diminish harm to the environment and reduce exposure of endangered and threatened species
to pesticides. Using pesticide runoff and drift measures may be helpful in keeping more of the applied pesticide on the
field and may also lower your costs of pesticides.
Runoff
Where possible, use methods which reduce soil erosion, such as limited till and contour plowing; these methods also
reduce pesticide runoff.
Where feasible, use application techniques such as T banding and in-furrow techniques, which incorporate the pesticide
into the soil.
Pesticides with ground water warning labels are more likely to enter ground and surface water than those without such
warnings. When possible, use a pesticide that does not contain a ground water warning label.
Keep Informed about changing weather conditions, and try to avoid pesticide application when heavy rainfall is expected.
Drift
Wind direction, speed, and evaporation are important factors in reducing drift. Most importantly, pesticides should be
applied when the wind direction is away from areas of concern; try to avoid application during periods of high winds.
Avoiding applications during the hottest part of the day, when evaporation is highest, will further reduce drift.
When high winds and excessive evaporation are not present, a drift retardant may be useful for aerial applications.
Using the largest droplet size compatible with the pesticide coverage will reduce drift. Typically, higher spray volumes
will also result in less drift.
For the Protection of Your Land, Always Read and Follow Label Directions
xvEPA
United States
Environmental Protection
Agency
(7506C)
Washington, DC 20460
Official Business
Penalty for Private Use
$300
------- |