United States
Environmental Protection
Agency
Pesticides and
Toxic Substances (7506C)
EPA-735-K-94-004
August 1994
•sK,
Protecting Endangered
Species
Interim Measures
Bell County, Kentucky
The information in this pamphlet is similar to
what the U.S. Environmental Protection
Agency (EPA) expects to distribute once our
Endangered Species Protection Program is in
effect. The limitations on pesticide use are not
law at this time, but are being provided now for
your use in voluntarily protecting endangered and
threatened species from harm due to pesticide
use. We encourage you to use this information.
We also welcome your comments.
The Endangered Species Act is intended to
protect and promote recovery of animals and
plants that are in danger of becoming extinct due
to the activities of people. Under the Act, EPA
must ensure that use of pesticides it registers will
not result in harm to the species listed as
endangered or threatened by the U.S. fish and
Wildlife Service, or to habitat critical to those
species' survival. To accomplish this, the EPA
expects to implement program requirements
beginning in 1994. This program will protect
endangered and threatened species from harm due
to pesticide use.
EPA requests your comments regarding the
information presented in this publication. Please
let us know whether the information is clear and
correct. Also tell us to what extent following the
recommended measures would affect you typical
pesticide use or productivity. This information
will be considered by EPA during the final stages
of program development.
Please submit comments to:
Interim Endangered Species
Protection Program (7S06C)
U.S. EPA
401 M Street, SW
Washington, DC 20460
Recycled/Recyclable
Printed with Soy/Canola Ink on paper that
contains at least 50% recycled liber
About This Publication
This publication contains a County Map
showing the Area within the county where
pesticide use; should be limited to protect listed
species. These areas are identified on the map by
a shaded pattern. Each shaded pattern
corresponds to a species in need of protection.
The Shading Key shows the name of the species
that each shaded pattern represents and often
describes the shaded area. The area may be
described in terms of Township, Range, and
Section or by giving details about the habitat of
the species.
The first column of the "Table of Pesticide
Active Ingredients" lists the active ingredients for
which there should be limitations on use to
protect certain species. The next columns are
headed by the shaded pattern of the species with
Codes listed underneath them.
The Code indicates the specific limitation that
is necessary to protect the species. The section
titled Limitations on Pesticide Use explains the
code.
Does This Information Apply to You?
To determine whether this information applies
to your use of a pesticide, review the questions
below. The information applies only if you
answer "yes" to both questions:
Do you intend to use pesticides within or
near the shaded area on the county map?
• Are any of the ingredients listed on the front
panel of your pesticide product label named
in the "Table of Pesticide Active
Ingredients"?
If you answer "yes" to both questions, you
should follow the instructions on "How to Use
This Information" to determine if you should
limit use of the pesticide to help protect listed
species.
If you answer "no" to either question, you
should follow the usage directions on the
pesticide product label.
-------
Bell County, Kentucky
LEGEND
— County Border
County Seat
City
U.S., State Highway
Church
River, Stream, Creek
2km
-------
How To Use This Information
1) On the county map, find the specific shading patterns that cover, or are close to, the area where you will apply pesticides
2) Read the descriptor in the Shading Key for those patterns; this may further identify the area involved.
3) In the "Table of Pesticide Active Ingredients," locate the active ingredients in the pesiticide yoa intend to apply
4) Locate the codes to the right of the active ingredient name and under the shading patterns that apply to you
5) men using the pesticide, you should follow the limitations indicated for those codes described under "Limitations on Pesticide
6)
7) Read the information on Reducing Runoff and Drift on the back of this pamphlet.
Reducing Runoff and Drift
To Reduce Runoff
mere possible, use methods that reduce soil erosion, such as limited till and contour plowing. T1.se methods also reduce pesticide
Where feasible, use application techniques such as T banding and in-furrowing. These technique* incorporate the pesticide into the
Keep informed about changing weather conditions. Try to avoid applying pesticides when heavy rainfall is expected
To Reduce Drift
* «?^ "ft. Most importantly, apply pesticides when the wind
dunng h,gh wmds. Also avoid applications during the hottest part
of the day, when evapo is hg.'
When high winds and excessive evaporation are not factors, use a drift retardant for aerial applications.
Use the largest droplet size compatible with the pesticide coverage. Typically, higher spray volumes will also result in less driu.
To Protect Your Land, Always Read and Follow Label Directions
-------
Limitations on Pesticide Use
ooy -his pesticide w,«h,n 40 yards from theedge o, water within the shaded area ,or ground
applications, nor within 200 yards for aerial applications.
"
the areas described above.
3 Do not apply this pesticide within 100 yards from the edge of water w,thm the shaded area for
ground applications, nor within V4 mile for aerial applications. .
10 Do not apply directly to water within the shaded area. In addition, do not app.y d.rect.y to water
within 1 mile upstream from the shaded area.
20 Do not apply directly to water within the shaded area. „„„„„,<
41 Do not apply this pesticide within V» mile from the edge of water within the shaded area for ground
applications, nor within te mile for aerial applications.
43 Do not apply this pesticide within 100 yards from the edge of water within the shaded area for
ground applications, nor within 1/4 mile for aerial applications.
61 Do not apply this pesticide as a mosquito larvlclde within the shaded area.
applications.
-------
SHADING KEY
Table of Pesticide Active Ingredients
Active Ingredient
Shading Pattern
Code TAR*
ALDICARB~ '
ATRAZINE (granular)
ATRAZINE (non-granular)
AZINPHOS-METHYL
BENOMYL
BENSULJDE (granular)
BENSULIDE (non-granular)
CAPTAN
CARBARYL
CARBOFURAN
CHLOROTHALONIL (granular)
CHLOROTHALONIL (non-granular)
CHLORPYRIFOS
Alfalfa, Peanuts
Apples
Mosquito Larvicide Use
All Other Uses Except as a Termiticide
COPPER SULFATE, BASIC
CYPERMETHRIN
Cabbage and Lettuce
DEF
OIAZINON
DICOFOL
DICROTOPHOS
DIFLUBENZURON
DIMETHOATE
DISULFOTON
DIURON
ENDOSULFAN
ESFENVALERATE
ETHION
ETHOPROP
FENAMIPHOS
FLURIDONE
FONOFOS
ISOFENPHOS (granular)
ISOFENPHOS (non-granular)
3
3
399 1.5
2c
3
3
399 4
3
2c
3
3
399 2.8
43
41
61
3
3
2
2c
2c,10
399 1
2c
3
3
3
3
3
3
2c
3
2c
20
3
3
399 0.5
' TAR = Threshold Application Rate (Pounds of active ingredient per acre per application)
Active Ingredient
MALATHION
MANCOZEB
METHIDATHION
METHOMYL (granular)
METHOMYL (non-granular)
METHYL PARATHION
Mosquito Larvicide Use
All Other Uses
MEVINPHOS
NALED
Mosquito Larvicide Use
All Other Uses
NITRAPYRIN
OXAMYL (granular)
OXAMYL (non-granular)
OXYDEMETON-METHYL
OXYFLUORFEN
PARATHION (ethyl)
PENDIMETHALIN
PERMETHRIN
PHORATE
PHOSMET
PHOSPHAMIDON
PROFENOFOS
PROPACHLOR (granular)
PROPACHLOR (non-granular)
PROPARGITE
PYRETHRINS
SULPROFOS ,
TERBUFOS
THIODICARB
THIOPHANATE-METHYL
TRICHLORFON
TRIFLURALIN (granular)
TRIFLURALIN (non-granular)
Shading Pattern
I I
Code TAR*
2c,10
399 1.25
2c
399 0.6
3
61
3
2c
61
3
3
3
399 1.25
3
3
2c
3
297 0.04
2c
2c
399 4
2c
3
399 0.4
399 1.5
2c,10
3
3
399 7
3
2c
3
399 0.5
-------
§3 1
.
O>
O
------- |