United States
                             Environmental Protection
                             Agency
      Center for Environmental Research
      Information
      Cincinnati OH 45268
                             EPA/600/M-89/018
      July 1989
                                                  N OLOG Y
                                           RANSFER
                     The Bridge Between
                     Research and Use
             LIBRARY, REGION V
New Technology Transfer Publications
[use form in back to order by number in parentheses]

Seminar  Publication:  Corrective  Actions-
Technologies and Applications (625/4-891020)

  This publication provides information presented at a seminar
series designed  to address  selection  and application  of
technologies suitable for controlling and  treating  releases  of
hazardous wastes or their constituents from RCRA treatment,
storage and disposal facilities.  Engineering considerations are
discussed for specific  corrective  measure technology
applications including:

  • Containment Options
  • Chemical Treatment Processes
  • Biological Treatment Processes
  • Thermal Processes
  • Separation Techniques
  • Solidification/Stabilization Processes

  Information  is also  provided  on engineering  factors  to
consider when conducting a Remedial Field  Investigation  in
conjunction with  a pre-screenmg approach for  potential
corrective measure technology  selection. The  concluding
section of the publication addresses implementation strategies
for corrective measure technology applications.


Seminar  Publication: Solvent Waste Reduction
Alternatives (62514-89/021)

  This publication contains edited versions of presentations on
this subject made at five seminars  in  the  Spring of 1988.
Chapters are included  on land  disposal regulations and
requirements; waste solvent disposal alternatives from  various
industries such as process equipment  cleaning, parts cleaning,
and coatings; on-site and off-site reclamation; reuse, and waste
minimi2ation. The community's right-to-know of  the  use  of
hazardous waste  by  industry  in a community  is  also
addressed. Treatment alternatives are presented also.


Seminar Publication: Requirements tor Hazardous
Waste  Landfill  Design,  Construction   and  Closure
(625/4-89/022)

   This  publication contains edited versions  of the material
presented at ten seminars conducted  in  1988 on this subject.
Sections are included on design of clay and flexible membrane
liners,  leachate collector systems, and  landfill  covers
Construction quality assurance and control is  discussed and
includes sections on clay  and flexible membrane construction
procedures. Liner compatibility  with wastes is discussed, along
with test procedures used to evaluate chemical  compatibility.
Long-term  considerations  are discussed,  with emphasis on
problem areas and unknowns.


Handbook.  Guide to  Technical Resources for the
Design of Land Disposal Facilities(625/6-88/018)

  This Handbook has  been developed  to  facilitate  the
preparation  and  processing  of  land  disposal  permit
applications  It  directs the regulated  community and  the
regulators to  the  appropriate  EPA  technical  resource
documents, as they prepare or review permits required under
PL 480 (RCRA).

  States and local governments as well as design engineers
requiring information on both hazardous (Subtitle C) and non-
hazardous  (Subtitle D) waste facilities will  quickly recognize
what requirements  (laws or policy) are to be met, why these
requirements  are necessary  and where  to  find additional
information on  disposal facilities.  Topics discussed in detail
include:

  • Foundations
  • Dike integrity and slope stability
  • Liner systems
  • Cover systems
  • Run on/run-off  controls

  While the  subjects addressed in this Handbook are those
that  frequently  arise  in  preparing  and  reviewing  permit
applications, the information and references provided may also
be useful in designing and operating land disposal facilities,
both hazardous  and non-hazardous.
Handbook: Guidance  on Setting Permit Conditions
and Reporting Trial Burn Results (625/6-891019)

   This  Handbook provides guidance for establishing
operational conditions for incinerators. The document provides
a means for state and local agencies to achieve a level of
consistency in  setting permit conditions  that will result in
establishment of more uniform permit conditions nationwide. It
has been developed to assist permit writers in translating trial
burn results into site-specific operational conditions  in  an
incinerator permit.

   Contents include  a  detailed  discussion  of control
parameters, design considerations,  and  suggested reporting
formats. These  parameters  are  presented in the document
along  with  guidance on  how to develop permit  operating
conditions using the trial  burn data. The guidance  will also
assist applicants in planning trial burns  to address the key
operating parameters that must be measured and emphasize

-------
the necessity to test "worst-case" operations to enable permit
applicants to tailor their proposed operating conditions to the
needs of their facility.

   This document is part of the Hazardous Waste Incineration
Guidance Series prepared  by EPA to assist both the applicant
and the permit writer in the  RCRA process  leading to a final
operating permit for hazardous waste incinerators.

Handbook: Retrofitting POTWs  (625/6-89/020)
   This Handbook updates,  expands,  and replaces previous
publication: Improving POTW  Performance  Using  the
Composite  Correction  Program Approach.  Both  the
Comprhensive  Performance Evaluation (CPE)  and CCP
phases of  the  total  approach  to  POTW  performance
improvement have been  modified. Criteria  for  evaluating
stabilization pond systems  are  now  included  in  the  CPE
phase; criteria for evaluating/selecting technologies applicable
for retrofitting POTWs have been added to the CCP phase.


Report:  Injection Well Mechanical Integrity (625/9-
89/007)

   This report, orgiinally published in 1987, has been updated
with new  test methods  for mechanical integrity testing. Fifteen
leak test well designs, testing criteria, and test summaries are
included.
   A 3-phase research project was  conducted by  the Robert
S. Kerr Environmental Research  Laboratory  to  determine
state-of-the-arty methods  for mechanical integrity testing of
injection  wells  and to field test specific analyses methods.
This document  describes  the results of mechanical integrity
testing in two specially constructed test wells..


Report;  Volumetric  Tank  Testing:  An  Overview
(625/9-89/009)

   This 40-page document provides information to aid readers
in meeting  requirements  of  the regulations  governing
underground storage tanks. It is intended for  state and local
regulators and small tank owners and operators.
   Volumetric tank testing is a viable means of monitoring
underground storage tanks  for  leaks.  Volumetric testing  can
meet regulatory standards and  is  an important tool in
minimizing  the  effects of  leaks from  underground storage
tanks.  This document: 1)  describes the results of an EPA
study that evaluated volumetric tank tests for  detecting leaks
in tanks;  2) explains the accuracy  requirements specified in
the regulations, and 3) presents information that will  aid the
user in selecting a volumetric  tank test method  that  meets
these regulations.
 Future Technology Transfer Meetings

 Workshop  Series:  Emerging  Technologies  lor
 Upgrading  Existing or  Designing  New  Drinking
 Water Treatment Facilities

   These two-day workshops are sponsored and organized by
 alocal sections of AWWA and EPA's Regional Offices, as well
 as the Offices of  Drinking  Water and Research  and
 Development. They present  technical information on proven
 technologies to  encourage their use in either plans for process
modification or new construction Removal processes for lea
radon,  volatile organics, synthetic organics  and dismfectic
by-products are  discussed  along with  filtration, dismfectic
and corrosion control technologies.

   These sessions are  primarily  intended for regional, stal
and local  drinking water  regulatory  personnel who approv
plans for the construction  of new  or the  upgrading of existm
drinking water treatment facilities. Consulting engineers an>
drinking water treatment  equipment manufacturers will  alst
find these workshops helpful

   Plans are presently  being made to hold  two; workshops
one in the East and one in the  South East during late Augus
and September, 1989.
   There is a small registration fee. Additional information can
be obtained by contracting; Jim Smith,  USEPA-CERI,  26 W.
Martin Luther  King Drive, Cincinnati, OH 45268
Seminar  Series: Site Characterization  For  Ground-
Water Remediation

   These two-day seminars will address the level of detail m
site characterization that is necessary to control the certainity
and  specificity  of  ground-water remediations.  Presentations
will cover transport and fate issues and  the  state-of-the-art
techniques that can used to address them  Included in  these
discussions  will  be costs,  benefits, operational details and
limitations of site  characterization  techniques, as well as
ramifications of their use in terms of associated issues, such
as the allocation  of liability, cost  recovery and compliance
monitoring.

   Topics  will include  characterization of water movement in
the subsurface;  determining  the  extent  and  manitude  of
contamination in the  subsurface;  characterization  of
subsurface  physiochemical and  degradation  processes;
characterization of  spacial  and  temporal  variability  of
subsurface processes; use of models in site characterization;
applications and limitations of  in-situ soils remediation, and
aquifer restoration - applications.and limitations..

   There is no registration fee for these seminars A seminar
will be offerred in  each EPA Region,  October  1989 through
February  1990. For further  information, contact Carol Grove,
USEPA-CERI,  26  W  Martin Luther  King  Drive, Cincinnati,
Ohio 45268.
Chicago, IL
Kansas City, MO
Denver, CO
Dallas, TX
Boston, MA
New York, NY
Atlanta, GA
Philadelphia, PA
Seattle, WA
San Francisco, CA
October 3-4, 1989
October 5-6, 1989
Octover 17-18. 1989
October 19-20, 1989
November 7-8, 1989
November 9-10, 1989
January 16-17, 1990
January 18-19, 1990
February 5-6, 1990
February 7-8, 1990
Seminar Series: Fine Pore Aeration Systems
   Three  two-day seminars  addressing fine  pore aeration
systems for municipal wastewater  treatment are scheduled.
They will be held in the following locations:
 Philadelphia, PA
 Chicago, IL
 San Francisco, CA
August 15-16, 1990
November 13-14, 1990
November 15-16, 1990

-------
   The seminars will cover material developed  for  a new
Technology Transfer manual on Fine Pore Aeration Systems,
which will be made available  at this year's Water Pollution
Control  Federation Convention  in  San  Francisco,  CA,  in
October.  The manual addresses all  aspects of designing and
operating fine pore aeration systems. In addition, a chapter is
devoted to automated control, another includes extensive case
histories  of fine pore  installations, and another  presents
methodologies for cost evaluations.

   There is no registration fee  for these seminars. For further
information, contact Denis Lussier, USEPA-CERI,  26  W.
Martin Luther King Drive, Cincinnati, Ohio 45268.
Seminars: QA/QC Procedures for Hazardous  Waste
Incineration

   Three two-day workshops will address process monitoring,
sampling, and analytical procedures for testing and sampling
hazardous waste incinerators.

   The workshops  are primarily intended  for  RCRA permit
writers and permit applicants for hazardous waste incinerators
Others associated with the  permitting of these incinerators,
such as plant managers, consulting engineers, etc., will also
benefit from attendance at these workshops.

   The workshops will be held in the following locations:

San Francisco, CA   August 9-10, 1989
Kansas City, MO     August 14-15, 1989
Atlanta, GA         August 17-18, 1989

    For  further information, content Justice Manning, USEPA-
CERI, 26 W. Martin  Luther King Drive, Cincinnati, Ohio 45268.
Workshop  on  Risk  Assessment,  Management and
Communication of Drinking Water Contamination

   This workshop series is a modified version of a series of 14
previously conducted.

   These workshops are  sponsored by local  sections of
AWWA in cooperation with U.S. EPA Regional Offices. Topics
include  information on health  effects  of contaminant;  an
approach to risk assessment, risk communication; abatement
of lead, biological contamination, particulates, organics, and
radon; as well as corrosion control.  Each workshop attendee
participates in a  hands-on case  study designed to illustrate
the elements  of risk  assessment,  communication  and
management.

   Participants who can benefit from attending this program
include; regional,  state and local drinking water  regulatory
personnel  who work  in  the health and technology areas
related to.the construction of new or  the upgrading of existing
drinking water treatment facilities, or who must respond to
contamination incidents.

   A workshop is scheduled for August 16-17,  1989 in the
Boston area; and  one  is planned for Fall 1989 in the New
Orleans area. There is a small registration  fee.  Additional
information can  be obtained  by  contacting:  Jim  Smith,
USEPA-CERI, 26 W. Martin.Luther King  Drive,  Cincinnati, OH
45268.
Third International Conference on New
Frontiers for Hazardous Waste
Management

   This conference will feature technologies currently being
developed  to treat hazardous  waste materials. The  major
topics  to  be  addressed  include:  thermal  treatment,
physical/chemical treatment, waste minimization, biological
treatment, solidification/stabilization, and  land  disposal. The
program will feature  scientists  and engineers  from  fourteen
countries. Also  featured will be  93 exhibitors that provide
environmental engineering and consulting services.

   The  conference is jointly sponsored  by the U.S. EPA,
American Academy  of Environmental  Engineers,  United
Nations  Environment  Programme, World Federation  of
Engineering Organizations and NUS  Corporation. The
conference will  be held in Pittsburgh, PA, September  10-13,
1989. The registration fee is $325 if registered  before August
25 and $395 after August 25. For further information contact
Marilyn  Diethorn,  NUS Corporation,  Park  West  Two,
Pittsburgh, PA, 15275 or call at 412-788-1080.


The SITE Program and Information
Clearinghouse - Update

   In  1986, EPA's Office of Solid  Waste and  Emergency
Response  and Office of  Research  and  Development
established the  Superfund Innovative Technology Evaluation
or SITE program. The purpose is  to  assist  technology
developers in  the   evaluation  of  innovative  treatment.
measurement and monitoring technologies. Through treatment
technology demonstrations, the SITE program seeks  to
encourage the use of innovative  technologies  at Superfund
and other hazardous waste sites to achieve more permanent
protection of human health and the environment.

   Under the program, EPA jointly conducts full or pilot-scale
technology  demonstration and evaluation projects with  a
developer,  usually  at  a Superfund  site. The developer
demonstrates  the   technology,  while  EPA evaluates
performance of the  technology, its reliability  and costs.  In
addition, EPA  is assisting  private  industry in  developing
emerging treatment technologies from the conceptual  stage to
engineering scale through  one-  or two-year cost-sharing
agreements.

   EPA is documenting the SITE demonstration results  in
reports  to be made  available to  Federal,  State  and  private
cleanup managers and other interested parties.  EPA prepares
two reports concerning  each technology field demonstration.
The  Technology Evaluation  Report details the actual field
demonstration, and the Applications Analysis Report gives an
m-depth discussion  of the  general performance  and
applicability of  each  technology  based  on data from the
demonstration as well as other sources.

   The  SITE program  is in its third year, and there are
currently 29 participants in the Demonstration Program,
offering technologies  that include solvent  extraction, soils
washing, thermal destruction, in-situ steam  and air stripping,
biological treatment,  and solidification/stabilization. Ten field
demonstrations have been completed, and approximately 10
more are scheduled before the end of this calendar year. The
first  seven emerging  technologies  projects have  been
underway for almost a year.

-------
   As part of the technology transfer effort, the SITE program
is  developing  an information  clearinghouse to collect,
synthesize,  and  disseminate technology performance
information. Three components  of the clearinghouse  are in
place:
•  A hotline  provides callers with  up-to-date information on
   SITE projects, demonstration schedules and the availability
   of the results, and also refers callers to other sources of
   information. The number is 800-424-9346 or (FTS)  382-
   3000 in Washington, DC.
•  An  electronic bulletin board,  part  of  a  planned
   computerized  database  network, provides  summary
   information on the SITE projects, demonstration  schedules
   and  results. Since we  are in  the pilot phase, this bulletin
   board is currently only  available  to Federal and  State
   hazardous waste cleanup personnel. These personnel may
   contact  Jim Cummings, EPA's Office of Solid Waste and
   Emergency Response, 202-382-4686 (FTS 382-4506), for
   information on joining the electronic bulletin board.
•  A collection  of  reports, journals  and other documents is
   housed  in the EPA Library's Hazardous Waste Collection.
   This collection  is  available at EPA Headquarters  and is
   accessible using onsite personal computers at EPA's 10
   regional office and 5 laboratory libraries. SITE documents
   will be added as they become available.
   EPA envisions expanding this Information Clearinghouse to
include data generated by other EPA programs  and other
Federal agencies and State hazardous  waste  cleanup
projects. For more information on the clearinghouse, contact
the hotline  in Washington, D.C.

   The reports listed below are available  from  the SITE
program, and may be obtained  from  NTIS, 5285 Port Royal
Road, Springfield, VA 22161 (703)487-4850.

   Technology  Evaluation   Report,  SITE   Program
   Demonstration  Test, Shirco Infrared Incineration System,
   Peak Oil, Brandon, Florida - Volume I (EPA/540/5-88/002a),
   NTIS Order No.  PB89-125991, $21 95
   Technology Evaluation  Report, SITE Demonstration Test,
   Hazcon  Solidification, Douglassville, Pennsylvania - Volume
   I,  (EPA 540/5-89/001 a),  NTIS Order No. PB89-158810,
   $21.95.
   Technology  Evaluation   Report,  SITE   Program
   Demonstration  Test, Terra Vac In-Situ Vacuum  Extraction
   System, Groveland, Massachusetts  - Volume I, (EPA 540/5-
   89/003a), NTIS Order No. PB89-192025, $21.95.
   Technology  Evaluation   Report,  SITE   Program
   Demonstration Test, Shirco  Pilot-Scale Infrared Incineration
   System, Rose Township, Demode Road Superfund  SITE -
   Volume I (EPA 540/5-89/007a),  NTIS Order No.  PB89-
   167902,521.95.
   Technology  Evaluation  Report:  SITE   Program
   Demonstration  Test, International Waste  Technologies In
   Situ Stabilization/Solidification, Hialeah, Florida -  Volume I
   (EPA/540/5-89/004a),  NTIS  Order  No. PB89-194161,
   $21.95.
   [Volume II of the above publications contames the technical
   operating  logs,  sampling and analytical data,, and  quality
   assurance data, and is also available from NTIS].
   Technology   Evaluation  Report,  SITE  Program
   Demonstration Test, The American Combustion Syretron
   Thermal Destruction System, EPA Combustion  Research
   Facility (EPA/540/5-89/008), NTIS Order No. PB89-16789
   S28.95.
The Superfund Innovative Technology
Evaluation Program, Progress and
Accomplishments FY1988 - A Report to
Congress
   EPA is required to submit a report to Congress annually o
the progress and results  of the SITE program. This secon<
report presents the  accomplishments  during  FY 1988  am
covers  October 1987-December  1988. During this period !
field demonstrations were  completed,  11  additiona
technology developers were accepted  into the  Demonstratior
Program, and the first seven technologies were selected fo
the Emerging Technologies Program. This  Report EPA/54Q/5
89-009 is available from.
    ORD Publications
    26 W. MLK Drive
    Cincinnati, OH 45268

-------
                   Supporting  the Environmental Research  Community:
                              EPA's Office of Exploratory Research
The  Office of Exploratory Research  (OER) is the primary
contact between EPA  and the  environmental  research
community. OER has four main goals:

•  supporting the environmental research community in  its
   work on fundamental  environmental  research, thereby
   promoting a solid foundation of  knowledge and a cadre of
   scientific and technical personnel  in  the environmental
   sciences;

•  promoting  awareness of  EPA  needs  within the
   environmental  research  community and to encourage
   researchers to work on  problems of interest to EPA;

•  supporting long-range  research which will help EPA get
   "ahead of the curve" in regulatory decision-making; and

•  promoting close interaction  and mutual awareness among
   EPA researchers  and  the environmental research
   community.

OER has several programs to support environmental research
and researchers'


Research Programs
Most of the research supported hy OER is fundamental, long
range research  that focuses  on  emerging environmental
problem areas or on  advanced concepts and techniques in the
environmental sciences and engineering.

Research Grants

The  research grants program supports investigator-initiated
research in environmental  science and engineering. Each year
the grants program issues a general solicitation  which invites
proposals  on  topics  in five areas of environmental research.
environmental health, environmental  biology, environmental
engineering, air  chemistry and physics, and water chemistry
and physics.

Embedded in  the general  solicitation is the Minority Institution
Assistance Program. Under this  program, OER provides
assistance to applicants from minority institutions who wish to
prepare applications for  grants. Applications from  minority
Institutions which are recommended for funding by the grant
peer review panel,  but are not ranked high enough  to be
supported by the general grants program can  be supported
from a small fund set aside for this program.

A Request for Applications is issued when EPA is interested
in a fairly well-defined research area which can  be addressed
by a collection of focused studies supported through a grant,
or when EPA wishes to  explore  a  new research  area  to
ascertain whether and how to support further research in that
area. The research conducted is expected to establish a body
of scientific facts with potential use other than establishing the
feasibility and desirability of a specific research program.

All grants  received from either type of solicitation undergo  a
rigorous review  via standing or ad hoc peer  review panels. In
general, about one sixth of the grant proposals received are
supported  by  OER.  The grants program  is currently
expanding, with  an  expected  increase in funds  from  $8 2
million  in  1989  to $18.1  million  in 1990.  The averaqe grant
award  is for  a  two to  three  year period  at  about $100
thousamd per year.  Copies of the solicitation  and qrants
application kit may be obtained from:

  Research Grants Staff
  Office of Exploratory Research (RD-675)
  U. S. Environmental Protection Aqency
  40t  M Street, S.W.
  Washington, D C. 20460
Environmental Research Centers (ERC)

The Environmental Centers Program supports interdisciplinary
research in  eight areas chosen  10 years ago  by EPA as
sufficiently important to warrant several years of concentrated
effort and  stable support.  The  eight  centers  and  their
specialties are:

  University of Pittsburgh -- environmental epidemiology
  Cornell University - ecosystems research
  University of Rhode Island -- marine science
  University of Illinois -- advanced control technology
  Illinois Institute of Technology - industrial waste elimination
  Rice/Oklahoma/Oklahoma State - ground water
  Louisiana State University - hazardous waste
  University of California, Los Angeles -- intermedia transport

In I986,  thedecision was made to cotinue the phase-out of the
current  centers  until 1991  and  then  issue a new center
solicitation.  EPA's long-term, theoretical  research needs are
being re-examined and program  design  options evaluated.
When this process is  completed, a new solicitation will be
published. The competition is expected to take place in 1991.

The budget for the environmental research centers program is
$4.5  million  in  1989,  or approximately  $540  thousand per
center.
Hazardous Substance Research Centers (HSRC)

In 1989,  EPA  establishd five university-based  research
centers across the country to perform  lomg term and short-
term research,  as well as technology transfer activities  on
topics relating to hazardous substances. EPA partitioned the
country into five geographic areas consisting of the States in
two adjacent Federal regions.  One center  was selected for
each of these "region-pairs". Although  an  individual center's
research may be universal in  scope, it must perform activities
which coincide with the stated priorities  of the States officially
served by the center. Each center comprises a consortium of
universities. The lead institution of each  center is listed below,
withthe center's major focus:

New Jersey Institute of Technology -- incineration, in  situ
treatment techniques

University of  Michigan  -  biological  treatment of organic
contaminants

North Carolina State University -- waste minimization

Kansas State University —  removal  of metals,  mining waste,
and pesticide residues

Stanford -- surface and subsurface contamination

-------
Small Business Innovation Research (SBIR) Program

Federal law requires that 1.25% of EPA's extramural research
be devoted to SBIR. In FY 1989, the SBIR budget was about
$2,500,000. The SBIR Program funds  small  businesses with
ideas relevant to  EPA's mission. It focuses exclusively  on
projects in control technology or  process  instrumentation
development. Proposals are solicited in the fall of each year
for Phase  I research. Phase I  research consists of feasibility
studies which are supported at a level of  $50,000 Of these
Phase I studies, the best are picked for Phase II studies where
actual project development is started. Phase  II  studies are
supported  up to a level of $150,000 About  half of the Phase  I
efforts have also been supported as Phase II studies. Results
from the  SBIR  Program are  expected  to lead  to  the
commercial  development of  a product or  process  used in
pollution control.


Enhancement Programs
In  addition to stpporting  environmental research, OER funds
programs  to stimulate the entry of scientists and engineers
into  the  various  fields  of  environmental  research and
technology, and to sharpen the knowledge  and skills of those
already in  the field.

Visiting Scientists and Engineers  Program (VSEP)

VSEP is intended to attract eminent  environmental research
scientists  and  engineers  to EPA's laboratories to direct or
conduct research in collaboration with EPA's researchers. In
January of each year candidates are solicited to serve in full
or  part-time  appointments  of one to three years in areas of
interest to EPA laboratories Applications are reviewed  by a
panel  of  non-EPA  scientists  and  engineers  which
recommends candidates to EPA's Assistant Administrator  for
Research and Development.

Minority Institution Student Fellowship and Summer
Intern Program

Under this program, the payment of tuition,  fees and books,
and  a  stipend of about  $1,200 per  year  are  available  for
qualified seniors and graduate  students at minority institutions
to develop careers in the environmental sciences via the study
of the physical, biological or computer sciences.

After completion of a fellowship appointment, a summer intern
appointment may be offered to persons  participating  in the
fellows program,  to work at an EPA research laboratory or in
other government or private laboratories conducting
research  on topics in environmental  science or technology.
Support to the summer  interns is  in the form of  a small
allowance  to cover  living costs and  transportation  to the
laboratory of choice,
Environmental Science and Engineering Fellows
Program

OER  also sponsors  an  Environmental  Science am
Engineering  Fellows  Program,  a competitive  progran
administered  by OER through American  Association  for the
Advancement of Science (AAAS). Each year, ten postdoctora
to mid-career  professionals are selected for a ten week tour o
duty during the summer as special  research consultants in ar
EPA Washington program office  The  successful candidate
can be assigned to work in offices dealing with  regulation,
research, or enforcement. Applications for  these fellowships
are solicited by the AAAS in December

The key contacts for the above programs are.
Research Grants:
Environmental Research Centers:
Hazardous Substance Research Centers.
Small Business Innovation Research.
Superfund Grants
Robert Papetti
202/382-7473

Karen Morehouse
202/382-5750
Karen Morehouse
202--382-5750
Walter Preston
202/382-7445
Don Carey
202/382-7445
Minority Internship  Fellowship Programs  Virginia Broadway
                                      202/382-7473
Visiting Scientists and Engineers Program. Alvin Edwards
                                      202/382-7445
Summer Fellows Program:
Robert Papetti
202/382-7473

-------
                               Table 1.   EPA's Environmental Research Centers
Subject
institution/Center Director
Associated EPA Laboratory/Project Officer
Environmental Epidemiology
Univ of Pittsburgh
Bruce Case
412/624-3012
Health Effects Resrach Laboratory
Gunther Craun
COM: 513/569-7422
FTS: 684-7422
Advanced Environmental
Control Technology
Univ of Illinois (Urbana)
Richard Engelbrecht
217/333-3822
Risk Reduction Engineering Laboratory
Louis Lefke
COM: 513/569-7953
FTS: 684-7953
Industrial Waste Elimination
Illinois Institute of Technology
James Patterson
312/5673535
Risk Reduction Engineering Laboratory
Louis Lefke
COM- 513 569-7953
FTS. 684-7953
Hazardous Waste
Louisiana State University
Louis Thibodeaux
504/388-6770
Risk Reduction Engineering Laboratory
Louis Lefke
COM 513/569-7953
FTS: 684-7953
Intermedia Transport
University of California at Los Angeles
Yoram Cohen
213/825-8766
Environmental Monitoring and Support Laboratory
Joseph Behar
COM. 702/798-2100
FTS 545-2216
Marine and Coastal Ecology
University of Rhode Island
Michael Pilson
401/792-6104
Environmental Research Laboratory
Jan Prager
COM: 401/782-3000
FTS: 838-6000
Ecosystems
Cornell University
Leonard Wemstem
607/255-3972
Office of Environmental Processes and Health Effects
Michael Slimak
COM  202/382-5950
FTS 382-5950
Ground Water
Rice University/University of
Oklahoma Oklahoma State University
C. Herbert Ward
713/527-4086
Robert S. Kerr Environmental Research Laboratory
Marion Scalf
COM. 405/332-8800
FTS: 742-2308

-------
Table 2. EPA's Hazardous Substance Research Centers
Region-Pair
1-2
3-5
4-6
7-8
9-10
Institution/Center Director
New Jersey Institute of Technology
Richard Magee
201/596-3006
University of Michigan
Walter Weber
313/763-1464
North Carolina State University
Michael Overcash
919/737-2325
Kansas State University
Larry Erickson
913/532-5584
Stanford University
Perry McCarty
415/723-4131
Consortium Partners
MIT, Princeton, Rutgers, Stevens Institute of
Technology, Tufts, University of Medicine and
Dentistry of NJ
Michigan State University, Howard University
University of North Carolina, Texas A&M
Montana State, Universities of Iowa, Missouri,
Montana, Nebraska, Utah
Oregon State University

-------
                                                                                            AUG     1989
                 REQUEST FOR TECHNOLOGY TRANSFER  MATERIAL
PROCESS DESIGN  MANUALS
Phosphorus Removal (Sept. 1987)  	   625/1-87/001 Q
Onsite Wastewater Treatment and Disposal Systems (Oct. 1980)  	   625/1-807012 Q
Land Treatment ot Municpa! Wastewater (Oct. 1981}  	   625/1-81/013 Q
Supplement for Land Treatment of Municipall Wastewater (Oct. 1984)  	   625/1-81/013a Q
Dewatering Municipal Wastewater Sludges (Sept. 1987)  	   625/1-87/014 Q
Municipal Wastewater Stabilization Ponds (Oct. 1983)  	   625/1-83/015 Q
Land Application of Municipal Sludge (Oct. 1983)  	   625/1-83/016 Q
Electrostatic Precipitator Operation and Maintenance (Sept  1985)  	   625/1-85/017 n
Odor and Corrosion Control in Sanitary Sewerage Systems and Treatment Plants (Oct. 1985)  	   625/1-85/018 Q
Lime/Limestone FGD Inspection and Performance Evaluation Manual (Oct. 1985)  	   625/1-85/019 Q
Fabric Filter Operation and  Maintenance (June 1986)  	    625/1-86/020 n
Municipal Wastewater Disinfection (Oct. 1986)  	   625/1-86/021 D
 Constructed Wetlands and Aquatic Plant Systems for Municipal Wastewater Treatment (Oct. 1988) 	   625/1-88/022 Q


TECHNICAL CAPSULE  REPORTS
First Progress Report: Wellman-Lord SO2 Recovery Process - Flue Gas Desulfurization Plant   	   625/2-77/011 Q
Recovery of Spent Sulfuric  Acid from Steel Pickling Operations   	   625/2-78/017 Q
Fourth Progress Report: Forced-Oxidation Test Results at the EPA Alkali Scrubbing Test Facility 	   625/2-78/018 Q
Particulate Control by Fabric Filtration  on Coal-Fired Industrial Boilers  	   625/2-79/021 D
Bahco Flue Gas Desulfunzation and Particulate Removal  System	   625/2-79/022 Q
First Progress Report: Physical Coal Cleaning Demonstration at Homer City, PA  	   625/2-79/023 n
Acoustic Monitoring to Determine the Integrity of Hazardous Waste Dams 	   625/2-79/024 Q
Disposal of Flue Gas Desulfurization Wastes: Shawnee Field Evaluation  	   625/2-80/028 Q
Adipic Acid-Enhanced Lime/Limestone Test  Results at the EPA Alkali  Scrubbing Test Facility  	   625/2-82/029 Q
Benefits of Microprocessor  Control of Curing Ovens for Solvent Based Coatings  	   625/2-84/031 Q


SEMINAR  PUBLICATIONS
Composting of Municipal Wastewater Sludges  	   625/4-85/014 Q
Municipal Wastewater Sludge Combustion Technology   	   625/4-85/015 n
Permitting Hazardous Waste Incinerators    	   625/4-87/017 Q
Meeting Hazardous Waste Requirements for Metal Finishers  	   625/4-87/018 D
• Corrective Actions - Technologies and Applications  	   625/4-89/020 D
• Solvent Waste Reduction Alternatives  	   625/4-89/021 PJ
• Requirements for Hazardous Waste  Landfill Design, Construction and Closure   	   625/4-89/022 Q


BROCHURES
Environmental Pollution Control Alternatives: Reducing Water Pollution Control Costs - Electroplating 	   625/5-85/016 Q
Environmental Pollution Control Alternatives: Centralized Waste Treatment Alternatives - Electroplating   . . .   625/5-81/017 n
Nitrogen Oxide Control for Stationary Combustion Sources   	   625/5-86/020 Q
User's Guide:  Emission Control Technologies/Emission Factors for Unpaved Road Fugitive Emissions  ....   625/5-87/022 PJ

-------
HANDBOOKS
Remedial Action at Waste Disposal Sites (Oct. 1985)  	   625/6-85/006 __
Identification/Correction of Typ. Design Deficiencies at Municipal Wastewater Treatment Facilities (Oct. 1982)  625/6-82/007 Q
Septage Treatment and Disposal (Oct. 1984)   	   625/6-84/009 C
Estimating Sludge Management Costs at Municipal Wastewater Treatment Facilities (Oct. 1985)   	   625/6-85/010 n
Permit Writers Guide to Test Burn Data: Hazardous Waste Incineration (Sept. 1986)  	   625/6-86/012 d
Stream Sampling for Waste Load Allocation Appl. (Sept. 1986)  	   625/6-86/013 D
Control Technologies for  Hazardous Air Pollutants (Sept. 1986)  	   625/6-86/014 fj
Ground Water (March 1987)  	   625/6-87/016 Q
Retrofitting POTWs for Phosphorus Removal in the Chesapeake Bay Drainage Area (Sept. 1987)  	   625/6-87/017 PJ
• Guide to Technical Resources for the Design of Land Disposal Facilities (Dec. 1988)   	   625/6-88/018 Q
• Guidance on Setting  Permit Conditions and Reporting Trial Burn Results (Jan. 1989)	   625/6-89/019 Q
• Retrofitting POTWs (July 1989) 	   625/6-89/020 Q

INDUSTRIAL ENVIRONMENTAL POLLUTION CONTROL MANUAL
Waste Minimization Opportunity Assessment (July 1988)  	   625/7-88/003 PJ


SUMMARY REPORTS
Control and Treatment Technology for the Metal Finishing Industry Series: Sulfide Precipitation  	   625/8-80/003 n
Sulfur Oxides Control Technology Series: FGD Dual Alkali Process     	   625/8-80/004 Q
Sulfur Oxides Control Tech. Series: FGD Lime/Limestone Processes     	   625/8-81/006 Q
Control and Treatment Technology for the Metal Finishing Industry Series- Ion Exchange  	   625/8-81/007 Q
Control and Treatment Technology for the Metal Finishing Industry Series: In-Plant Changes  	   625/8-82/008 n
Sulfur Oxides Control Technology Series: FGD Spray Dryer  Process   	   625/8-82/009 D
Fine Pore (Fine Bubble) Aeration Systems  	   625/8-85/010 D
Technology Assessment  of Sequencing Batch Reactors	   625/8-86/011 n
Causes and Control of  Activated Sludge Bulking and Foaming  	   625/8-87/012 Q
Biomonitoring to Achieve Control of Toxic Effluents  	   625/8-87/013 D
Compendium of Technologies Used in Treatment of Hazardous Wastes   	   625/8-87/014 fj


EXECUTIVE BRIEFINGS
Protecting Health and Safety at Hazardous Waste Sites   	   625/9-85/006 Q
Injection Well Mechanical Integrity  	    625/9-89/007 Q
• Experiences in Incineration Applicable to Superfund Site Remediation   	   625/9-88/008 D
• Volumetric  Tank Testing: An Overview 	   625/9-89/009 D


ENVIRONMENTAL REGULATIONS AND TECHNOLOGY PUBLICATIONS
The Electroplating Industry 	   625/10-85/001 Q
Environmental Regulations and Technology Use and Disposal of Municipal Wastewater Sludge 	   625/10-84/003 n
Fugitive VOC Emissions in the Synthetic Organic Chemicals Manufacturing Industry 	   625/10-84/004 O
The National Pretreatment Program  	   625/10-86/005 Q
If you are not on the mailing list for the Technology Transfer Newsletter, do you want to be added?   Yes Q         No Q
If you are on the mailing list for the Technology Transfer Newsletter, do you want to remain?        Yes Q         No D

Name	
Company	
Street                             	
City/State/Zip Code	
• Publication listed for first time.
Forward to: CERI, Technology Transfer, U.S. Environmental Protection Agency, P.O. Box 12505, Cincinnati, OH 45212.

-------
Future Technology Transfer Meetings
Meeting
Seminar









Seminar



Workshop


Seminar




Seminar









Title
Site Characterization for Ground-Water
Remediation








Fine Pore Aeration Systems



Emerging Technologies for Upgrading
Existing or Designing New Drinking Water
Treatment Facilities
Medical and institutional Waste
Incineration



Immobilization Technologies at Hazardous
Waste Sites








Date(s)
October 3-4, 1989
October 5-6, 1989
Octover 17-18, 1989
October 19-20, 1989
November 27-28, 1989
November 29-30, 1 989
January 16-17, 1990
January 18-19, 1990
February 5-6, 1990
February 7-8, 1990
November 13-14, 1989
November 16-17, 1989


To Be Announced


October 17-18, 1989
November, 1989
December 7-8, 1989
January 25-26, 1990
To Be Announced
October 16-17, 1989
October 18-19, 1989
October 30-31, 1989
November 1-2, 1989
November 13-14, 1989
November 15-16, 1989
December 4-5, 1989
December 6-7, 1989
January 8-9, 1990
January 10-11, 1990
Location
Chicago, IL
Kansas City, MO
Denver, CO
Dallas, TX
Lowell, MA
New York, NY
Atlanta, GA
Philadelphia, PA
Seattle, WA
San Francisco, CA
Chicago, IL
San Francisco, CA


To Be Announced


Providence, Rl
Chicago, IL
Baton Rouge, LA
San Francisco, CA
Tallahassee, FL
Chicago, IL
Kansas City, MO
Atlanta, GA
New York. NY
Boston, MA
Philadelphia, PA
Seattle, WA
San Francisco, CA
Dallas, TX
Denver, CO
Contact
Tnsha Hasch
(registration)

Carol Grove
(content)





Karen Natsios
(registration)
Denis Lussier
(content)
Jim Smith


Karen Natsios
(registration)

Justice Manning
(content)
Peer Consultants
(registration)

Clarence Clemens
(content)





Phone No.
617-648-7311


513-569-7362
FTS 684-7362





617-648-7810

513-569-7354
FTS 684-7354
513-569-7355
FTS 684-7355

617-648-7810


513-569-7349
FTS 684-7349
513-252-1222


513-569-7358
FTS 684-7358






-------