Technology Transfer Newsletter June 1990

&EPA

-------
Current regulatory initiatives are
discussed, and an update of EPA's Health
Advisory Program is given. Included is a
case study that illustrates the elements of
risk assessment, communication and
management. This publication will be of
primary interest to Federal, state and local
regulatory personnel who work in the
health and technology areas related to
drinking water treatment facilities, or who
must respond to contamination incidents.
It should also be of interest to consultants
and drinking water utility staff actively
engaged in the design, operation and/or
upgrading of treatment systems.
&EF*
Environmental Pollution
Control Alternatives:
Drinking Water Treatment
for Small Communities
New Document Discusses Drinking
Water Treatment for Small
Communities (625/5-90/025)
This document provides information for
small system owners, operators,
managers, and local decision makers,
such as town officials, regarding drinking
water treatment requirements and the
treatment technologies suitable for small
systems. It is not intended to be a
comprehensive manual for water
treatment. Rather, it is designed to give an
overview of the problems a small system
may face, treatment options that are
available to solve specific problems, and
resources that can provide further
information and assistance.
Handbook

Hazardous Waste
Incineration
Measurement Guidance
Volume III of the
Hazardous Waste
Incineration Guidance
Series
Hazardous Waste Incineration
Guidance Discussed in New
Handbook (625/6-89/021)
This publication, Volume III of the
Hazardous Waste Incineration Guidance
Series, contains general guidance to
permit writers in reviewing hazardous
waste incineration permit applications and
trial burn plans. The handbook is a how-to
document dealing with how incineration
measurements are made.
Guidance is presented on commonly
required parameters and methods for
process monitoring, sampling and analysis
aspects of hazardous waste trial burns,
subsequent operation of the incinerator,
and quality assurance/quality control
associated with these activities.
The major elements of incineration
measurements are introduced through
discussion and technical references. An
all-inclusive list of measurements that
should be required in every case is not
provided, nor are complete descriptions of
all pertinent methods. References are
cited to provide more detailed information
on measurements and methods. In
addition, experts will need to be consulted
on occasion.
Handbook

Quality
Assurance/Quality
Control (QA/QC)
Procedures for Hazardous
Waste Incineration
Hazardous Waste Incineration
Quality Assurance and Quality
Control Procedures Presented in
New Document (625/6-89/023)
Resource Conservation and Recovery
Act regulations for hazardous waste
incineration require trial burns by permit
applicants. A Quality Assurance Project
Plan (QAPjP) must accompany a trial burr
plan with appropriate quality
assurance/quality control procedures.
Guidance on the preparation and review o
QAPjPs, design of QA/QC procedures,
and assessment of trial burn results is
contained in this handbook. QA/QC
procedures are defined for process
monitoring, sampling, and analysis for
both the initial trial burn and for later
continuing operation of the incineration
facility. Pollutant categories discussed eire
principal organic hazardous constituents
(POHCs), metals, particulates, acid gases,
and combustion gases.
Engineers, chemists, environmental
scientists, facility personnel, and EPA staf
at various levels should find this handbook
useful. It has been written with the EPA or
State permit writer's information needs in
mind, but would be of considerable
interest to the permit applicant.
-------

£ERA Handbook
Operation and
Maintenance of Hospital
Medical Waste
Incinerators
Handbook Discusses O&M of
Hospital Waste Incinerators (625/6-
89/024)
Proper operation of the incinerator will
reduce the emissions of most of these
pollutants. Air pollution control devices are
available to further control these
pollutants. Because of the national interest
in hospital medical waste and the need for
technology application, the Center for
Environmental Research Information
participated with the Control Technology
Center in preparing this handbook.
This handbook is a general overview of
proper operation and maintenance (O&M)
procedures. It is a source of information
on the O&M procedures that should be
used on hospital waste incinerators and
associated air pollution control equipment
to minimize air emissions. Since
manufacturers should provide specific
O&M instructions and manuals for their
equipment, this handbook should be
viewed only as a supplement for proper
O&M.
The handbook will prove helpful to
Federal, state, and local regulatory agency
personnel, hospital waste management
personnel, hospital incinerator operators,
and others associated with medical waste
incinerators. Several pollutants, including
potentially toxic ones, are emitted during
the operation of medical waste
incinerators.
&ERA Summary Report

Optimizing Water
Treatment Plant
Performance with the
Composite Correction
Program
Report Presents Procedures for
Improving Water Treatment Plant
Performance(625/8-90/017)
This document summarizes the results
of an ongoing project to evaluate the utility
of the Composite Correction Program
approach to improving the performance of
drinking water treatment facilities. This
approach is a logical and systematic
evaluation of a water treatment facility. It is
made by a team with knowledge of
drinking water treatment plant design,
operation and operational trouble shooting
in order to identify the unique combination
of factors limiting performance. The
facility's capacity, operational
performance, maintenance program and
administration are among the factors
investigated.
Once the significant elements affecting
a plant's performance have been
identified, a program may be initiated to
address these findings and thus assist the
community in using its existing major unit
processes to achieve the desired finished
water quality.
The results of the 13 drinking water
plant evaluations done to date are
summarized as are two corrective action
programs. The case studies focus on the
potential for the approach to improve the
performance of small systems in meeting
the turbidity removal requirements of the
Surface Water Treatment Rule.
Handbook: Asessing the Fate of
Deep-Well-lnjected Hazardous
Waste (625/6-89/025a& b)
This handbook has been developed for
use as a reference tool in evaluating the
suitability of disposing of specific
hazardous wastes in deep injection wells.
Users of the document will get a better
understanding of the factors that affect 1)
geochemical waste-reservoir reactions of
potential concern, 2) compatibility testing,
and 3) assessment of the fate of injected
wastes. Information is presented in an
easily accessible format for examining a
specific hazardous waste type or geologic
regime that is under permitting
consideration. The Handbook is printed in
two volumes:
1. A Reference Guide (625/6-89/025a)
2. Summaries of Recent Research
(625/6-89/025b)
Future Technology Transfer
Meetings
Seminar Series: Incineration and
Alternative Treatment of Energetic
Compounds
Under RCRA, EPA is charged with the
permitting of all hazardous waste handling
units. In December 1987, EPA
promulgated permitting standards
("Subpart X") applicable to miscellaneous
waste management units not already
covered under the existing regulations.
These type units include geologic
repositories, thermal treatment units (e.g.,
incinerators), or other alternative treatment
units for waste propellents, explosives,
and pyrotechnics (PEP).
The performance objectives of Subpart
X require permit applicants to evaluate the
potential environmental impacts of the unit
or facility and to demonstrate that any
releases from the unit will not adversely
affect human health and the environment.
However, specific technology standards or
permit conditions are not easily defined.
The primary objective of this seminar
series is to provide information on all
technology used to incinerate or treat PEP
in miscellaneous units.
-------
By attending these seminars, PEP
manufacturers, handlers, users,
consultants, regulators, and the general
public will gain knowledge of incineration
and alternative treatment methods for
energetic compounds.
No fee is charged for attending this
seminar. For registration information
contact Denise Gaffey at 617-641-5317.
For technical information contact Justice
Manning at 513-569-7349.
Locations and dates for the seminars
are as follow.
Seattle, WA
Chicago, IL
Kansas City, MO
Edison, NJ
Sacramento, CA
Philadelphia, PA
Atlanta, GA
Denver, CO
June 5-7, 1990
June 19-21, 1990
June 26-28, 1990
July 17-19, 1990
July 24-26, 1990
Sept. 4-6, 1990
Sept. 11-13, 1990
Sept. 25-27, 1990
Seminar Series: Design and
Construction of RCRA/CERCLA
Final Covers
These two-day seminars will present
information on the proper design and
construction of final covers for RCRA
waste management facilities and CERCLA
sites. Seminar attendees will gain a better
understanding of regulatory requirements;
cover components; construction practices,
including quality assurance and quality
control methods; characteristics of soils,
geosynthetics and other materials; and
hydrologic and water routing processes
These seminars are intended for
federal and state personnel involved in
evaluating and permitting RCRA
hazardous waste facility and CERCLA site
closures. In addition, these seminars will
be valuable to the design and construction
community.
No fee is charged for attending this
seminar. The seminars will be held at the
following locations:
Atlanta,, GA
Philadelphia, PA
Boston, MA
Dallas, TX
Kansas City, MO
Denver, CO
New York, NY
Chicago, IL
Seattle, WA
San Francisco, CA
July 17-18,
July 18-19,
July 19-20,
July 24-25,
July 25-26,
July 26-27,
Aug. 13-14,
Aug. 14-15,
Aug. 15-16,
Aug. 16-17,
1990
1990
1990
1990
1990
1990
1990
1990
1990
1990
Seminar Series: Organic Emissions
from Treatment, Storage, and
Disposal Facilities
The 1984 Hazardous and Solid Waste
Amendments to the Resource
Conservation and Recovery Act require
standards for the monitoring and control of
air emissions from hazardous waste
treatment, storage, and disposal facilities
(TSDFs) as necessary to protect human
health and the environment. These
regulations are being promulgated in three
phases. The first phase covers organic
emissions from process vents and
equipment leaks at such facilities.
Hazardous waste facilities emit nearly
10 percent of all organic emissions from
stationary sources nationwide. Organic
emissions contribute to tropospheric
ozone formation, a significant national
problem for which EPA is pursuing
controls. Organic emissions from TSDFs
also may contain a variety of toxins such
as carbon tetrachloride, acrylonitrile, and
benzene. Accordingly, air emission
regulations are being developed for
numerous source categories at TSDF,
including tanks, containers, certain surface
impoundments, and fixation processes, as
well as process vents associated with
distillation/separation units, and equipment
leaks. Control of ozone precursors and
reduction of the toxicity potential of
organic emissions are the goals of these
first phase standards.
This series of ten seminars,
cosponsored with the Office of Air Quality
Planning and Standards, will present
control options and regulation
requirements applicable to TSDFs. Each
seminar will be three days, with the third
day for regulatory agency personnel only.
Two of these seminars have been
scheduled:
Boston, MA
New York, NY
Aug. 28-29, 1990
Sept. 11-12, 1990
For registration information, contact
Trisha Hasch at 617-641-5321. For
seminar content, contact Dan Murray at
513-569-7347.
The schedule for the remaining
seminars may be obtained by contacting
Peer Consultants, Inc. (513) 252-1222.
AWWA National Meeting and
Convention
The Offices of Research and
Development and Drinking Water will
again cooperate in an exhibit at the June
17-21, 1990 American Water Works
Association National Meeting in Cincinnati,
Ohio. Approximately 11,000 state and
utility personnel along with consultants,
manufacturers and academicians regularly
attend this meeting.
As part of the exhibit, ORD and ODW
display and make available to participants
many publications that are pertinent to the
Agency's Drinking Water Program. At last
year's meeting almost 5,000 ORD
publications were requested by visitors to
the booth.
Information Available From
The Superfund Innovative
Technology Evaluation (SITE)
Program

The Comprehensive Environmental
Response, Compensation, and Liability
Act (CERCLA) of 1980 provided for federa
funding to respond to releases of
hazardous substances to air, water or land
The Superfund Innovative Technology
Evaluation (SITE) Program resulted from
the Superfund Amendments and
Reauthorization Act of 1986 (SARA) which
added an "Alternative or Innovative
Treatment Technology Research and
Demonstration Program" to Title III of
CERCLA.
The SITE Demonstration Program,
conducted jointly by EPA's Office of
Research and Development and Office of
Solid Waste and Emergency Response,
has as its major thrust the documentation
of reliable performance and cost
information for innovative alternative
technologies. With this information new
technologies may be more adequately
considered for cleanup of Superfund sites
The demonstration projects identify
limitations of the technology, the need for
pre- or post-treatment of wastes,
applicable wastes and waste media,
potential operating problems, and the
approximate cost of applying the
technology. Currently, the program is
beginning is fifth year with 38 active
projects Eight of these projects involve
solidification/stabilization, nine concentrate
on thermal processes, five are biologiccil
processes, and the remaining 16 include
physical/chemical separation and
treatment techniques.
Reports have been published for
completed demonstration projects:

U.S Environmental Protection Agency,
Technology Evaluation Report: SITE
Program Demonstration Test, Shirco
Infrared Incineration System Peak Oil,
Brandon, Florida - Volume 1, Cincinnati,
Ohio, September 1988, EPA/540/5-
88/002a.
-------
U.S. Environmental Protection Agency,
Technology Evaluation Report: SITE
Program Demonstration Test, Shirco
Infrared Incineration System at the Rose
Township Demode Road Superfund Site -
Volume 1, Cincinnati, Ohio, April 1989,
EPA/540/5-89/007a.
U.S. Environmental Protection Agency,
Shirco Infrared Incineration System:
Applications Analysis Report, Cincinnati,
Ohio, June 1989, EPA 540/A5-89/010.
U.S. Environmental Protection Agency,
Technology Evaluation Report: SITE
Program Demonstration Test - The
American Combustion Pyretron Thermal
Destruction System at the U.S. EPA's
Combustion Research Facility, Cincinnati,
Ohio, April 1989, EPA/540/5-89/008.
U.S. Environmental Protection Agency,
Technology Evaluation Report: SITE
Program Demonstration Test, HAZCON
Solidification, Douglassville, Pennsylvania,
Cincinnati, Ohio, March 1989, EPA/540/5-
89/001 .
U.S. Environmental Protection Agency,
HAZCON Solidification Process,
Douglassville, PA: Applications Analysis
Report, Cincinnati, Ohio, May 1989, EPA
540/A5-89/001.
U.S. Environmental Protection Agency,
Technology Evaluation Report: SITE
Program Demonstration Test, Terra Vac In
Situ Vacuum Extraction System,
Groveland, Massachusetts - Volume 1,
Cincinnati, Ohio, April 1989, EPA/540/5-
89/003a.
U.S. Environmental Protection Agency,
Terra Vac In Situ Vacuum Extraction
System: Applications Analysis Report,
Cincinnati, Ohio, July 1989, EPA 540/A5-
89/003.
U.S. Environmental Protection Agency,
Technology Evaluation Report: SITE
Program Demonstration Test, International
Waste Technologies In Situ
Stabilization/Solidification, Hialeah,
Florida, Cincinnati, Ohio, August 1989,
EPA/540/5-89/004a
U.S. Environmental Protection Agency,
Technology Evaluation Report: CP
Systems Organics Extractor System, New
Bedford, Massachusetts, Cincinnati, Ohio,
January 1990, EPA/540/5-90/002.
U.S. Environmental Protection Agency,
Technology Evaluation Report: SITE
Program Demonstration Test, Soliditech,
Inc. Solidification/Stabilization Process -
Volume 1, Cincinnati, Ohio, February
1990, EPA/540/5-89/005a.
U.S. Environmental Protection Agency,
Technology Evaluation Report: SITE
Program Demonstration of the Ultrox
International Ultraviolet
Radiation/Oxidation Technology,
Cincinnati, Ohio, January 1990,
EPA/540/5-89/012.

In addition, the following program
summary document is also available:
U.S. Environmental Protection Agency,
The Superfund Innovative Technology
Evaluation Program: Technology Profiles,
Cincinnati, Ohio, November 1989,
EPA/540/5-89/013.
U.S. Environmental Protection Agency,
The Superfund Innovative Technology
Evaluation Program, Progress and
Accomplishments Fiscal Year 1989, A
Third Report to Congress. Cincinnati,
Ohio, March 1990, EPA/540/5-90/001.
Technology Transfer Meetings
Meeting
Seminar

Seminar

Title
Incineration and Alternative Treatment of
Energetic Compounds

Design and Construction of
RCRA/CERCLA Final Covers

Organic Emissions from Treatment,
Storage, and Disposal Facilities

Date(s)
June 5-7, 1990
June 19-21, 1990
June 26-28, 1990
July 17-19,1990
July 24-26, 1990
September 4-6, 1 990
September 11-13, 1990
September 25-27, 1990
July 17-18, 1990
July 18-19, 1990
July 19-20, 1990
July 24-25, 1990
July 25-26, 1990
July 26-27, 1990
August 13-14, 1990
August 14-15, 1990
August 15-16, 1990
August 16-17, 1990
August 28-29, 1990
September 11-12, 1990
(Others to be announced)

Location
Seattle, WA
Chicago, IL
Kansas City, MO
Edison, NJ
Sacramento, CA
Philadelphia, PA
Atlanta, GA
Denver, CO
Atlanta, GA
Philadelphia, PA
Boston, MA
Dallas, TX
Kansas City, MO
Denver, CO
New York, NY
Chicago, IL
Seattle, WA
San Francisco, CA
Boston, MA
New York, NY

Contact
Denise Gaffey
(registration)

Justice Manning
(content)

Trisha Hasch
(registration)

Dan Murray
(content)

Peer Consultants
(registration)

Justice Manning
(content)
Phone No.
617-641-5317

513-569-7349
FTS 684-7349

617-641-5321

513-569-7347
FTS 684-7347

513-252-1222

513-569-7349
FTS 684-7349
-------
REQUEST FOR TECHNOLOGY TRANSFER MATERIAL
PROCESS DESIGN MANUALS
Phosphorus Removal (Sept. 1987) 625/1-87/001 Q
Onsite Wastewater Treatment and Disposal Systems (Oct. 1980) 625/1-80/012 n
Land Treatment of Municpal Wastewater (Oct. 1981) 625/1-81/013 Q
Supplement for Land Treatment of Municipal Wastewater (Oct. 1984) 625/1-81/013a n
Dewatering Municipal Wastewater Sludges (Sept. 1987) 625/1-87/014 Q
Municipal Wastewater Stabilization Ponds (Oct. 1983) 625/1-83/015 Q
Land Application of Municipal Sludge (Oct. 1983) 625/1-83/016 Q
Electrostatic Precipitator Operation and Maintenance (Sept. 1985) 625/1-85/017 n
Odor and Corrosion Control in Sanitary Sewerage Systems and Treatment Plants (Oct. 1985) 625/1-85/018 Q
Lime/Limestone FGD Inspection and Performance Evaluation Manual (Oct. 1985) 625/1-85/019 n
Fabric Filter Operation and Maintenance (June 1986) 625/1-86/020 Q
Municipal Wastewater Disinfection (Oct. 1986) 625/1-86/021 Q
Constructed Wetlands and Aquatic Plant Systems for Municipal Wastewater Treatment (Oct. 1988) 625/1-88/022 Q
Fine Pore Aeration Systems (Oct. 1989) 625/1-89/023 D

TECHNICAL CAPSULE REPORTS
Particulate Control by Fabric Filtration on Coal-Fired Industrial Boilers 625/2-79/021 n
Bahco Flue Gas Desulfurization and Particulate Removal System 625/2-79/022 n
First Progress Report: Physical Coal Cleaning Demonstration at Homer City, PA 625/2-79/023 Q
Acoustic Monitoring to Determine the Integrity of Hazardous Waste Dams 625/2-79/024 Q
Disposal of Flue Gas Desulfurization Wastes: Shawnee Field Evaluation 625/2-80/028 Q
Adipic Acid-Enhanced Lime/Limestone Test Results at the EPA Alkali Scrubbing Test Facility 625/2-82/029 Q
Benefits of Microprocessor Control of Curing Ovens for Solvent Based Coatings 625/2-84/031 Q

SEMINAR PUBLICATIONS
Permitting Hazardous Waste Incinerators 625/4-87/017 Q
Meeting Hazardous Waste Requirements for Metal Finishers 625/4-87/018 Q
Transport and Fate of Contaminants in the Subsurface 625/4-89/019 Q
Corrective Actions - Technologies and Applications 625/4-89/020 D
Solvent Waste Reduction Alternatives 625/4-89/021 Q
Requirements for Hazardous Waste Landfill Design, Construction and Closure 625/4-89/022 n
• Technologies for Upgrading Existing or Designing New Drinking Water Treatment Facilities 625/4-89/023 D
• Risk Assessment, Management and Communication of Drinking Water Contamination 625/4-89/024 n

BROCHURES
Environmental Pollution Control Alternatives: Reducing Water Pollution Control Costs - Electroplating 625/5-85/016 n
Nitrogen Oxide Control for Stationary Combustion Sources 625/5-86/020 D
User's Guide: Emission Control Technologies/Emission Factors for Unpaved Road Fugitive Emissions .... 625/5-87/022 Q
• Environmental Pollution Control Alternatives: Drinking Water Treatment for Small Communities 625/5-90/025 Q

HANDBOOKS
Septage Treatment and Disposal (Oct. 1984) 625/6-84/009 Q
Permit Writers Guide to Test Burn Data: Hazardous Waste Incineration (Sept. 1986) 625/6-86/012 Q
Stream Sampling for Waste Load Allocation Applications (Sept. 1986) 625/6-86/013 Q
Control Technologies for Hazardous Air Pollutants (Sept. 1986) 625/6-86/014 n
-------
HANDBOOKS (continued)
Ground Water (March 1987) 625/6-87/016 Q
Retrofitting POTWs for Phosphorus Removal in the Chesapeake Bay Drainage Area (Sept. 1987) 625/6-87/017 n
Guide to Technical Resources for the Design of Land Disposal Facilities (Dec. 1988) 625/6-88/018 D
Guidance on Setting Permit Conditions and Reporting Trial Burn Results (Jan. 1989) 625/6-89/019 n
Retrofitting POTWs (July 1989) 625/6-89/020 Q
• Hazardous Waste Incineration Measurement Guidance (June 1989) 625/6-89/021 n
Stabilization/Solidification of CERCLA and RCRA Wastes (July 1989) 625/6-89/022 Q
• Quality Assurance/Quality Control (QA/QC) Procedures for Hazardous Waste Incineration (Jan. 1990) .... 625/6-89/023 D
• Operation and Maintenance of Hospital Waste Incinerators (January 1990) 625/6-89/024 n
• Assessing the Geochemical Fate of Deep-Well Injected Hazardous Waste (June 1990)
Reference Guide 625/6-89/025a D
Summaries of Recent Research 625/6-89/025b Q

INDUSTRIAL ENVIRONMENTAL POLLUTION CONTROL MANUAL
Waste Minimization Opportunity Assessment (July 1988) 625/7-88/003 Q

SUMMARY REPORTS
Sulfur Oxides Control Technology Series: FGD Dual Alkali Process 625/8-80/004 Q
Control and Treatment Technology for the Metal Finishing Industry Series: Ion Exchange 625/8-81/007 n
Control and Treatment Technology for the Metal Finishing Industry Series: In-Plant Changes 625/8-82/008 D
Sulfur Oxides Control Technology Series: FGD Spray Dryer Process 625/8-82/009 D
Fine Pore (Fine Bubble) Aeration Systems 625/8-85/010 n
Technology Assessment of Sequencing Batch Reactors 625/8-86/011 D
Causes and Control of Activated Sludge Bulking and Foaming 625/8-87/012 n
Biomonitoring to Achieve Control of Toxic Effluents 625/8-87/013 D
Compendium of Technologies Used in Treatment of Hazardous Wastes 625/8-87/014 n
Biomonitoring for Control of Toxic Effluent Discharges to the Marine Environment 625/8-89/015 n
In-Vessel Composting of Municipal Wastewater Sludge 625/8-89/016 D
• Optimizing Water Treatment Plant Performance with the Composite Correction Program 625/8-90/017 n

EXECUTIVE BRIEFINGS
Injection Well Mechanical Integrity 625/9-89/007 Q
Experiences in Incineration Applicable to Superfund Site Remediation 625/9-88/008 D
Volumetric Tank Testing: An Overview 625/9-89/009 Q
-------
HANDBOOKS (continued)
Ground Water (March 1987) 625/6-87/016 Q
Retrofitting POTWs for Phosphorus Removal in the Chesapeake Bay Drainage Area (Sept. 1987) 625/6-87/017 Q
Guide to Technical Resources for the Design of Land Disposal Facilities (Dec. 1988) 625/6-88/018 D
Guidance on Setting Permit Conditions and Reporting Trial Burn Results (Jan. 1989) 625/6-89/019 Q
Retrofitting POTWs (July 1989) 625/6-89/020 Q
• Hazardous Waste Incineration Measurement Guidance (June 1989) 625/6-89/021 Q
Stabilization/Solidification of CERCLA and RCRA Wastes (July 1989) 625/6-89/022 Q
• Quality Assurance/Quality Control (QA/QC) Procedures for Hazardous Waste Incineration (Jan. 1990) .... 625/6-89/023 Q
• Operation and Maintenance of Hospital Waste Incinerators (January 1990) 625/6-89/024 n
• Assessing the Geochemical Fate of Deep-Well Injected Hazardous Waste (June 1990)
Reference Guide 625/6-89/025a Q
Summaries of Recent Research 625/6-89/025b Q

INDUSTRIAL ENVIRONMENTAL POLLUTION CONTROL MANUAL
Waste Minimization Opportunity Assessment (July 1988) 625/7-88/003 Q

SUMMARY REPORTS
Sulfur Oxides Control Technology Series: FGD Dual Alkali Process 625/8-80/004 Q
Control and Treatment Technology for the Metal Finishing Industry Series: Ion Exchange 625/8-81/007 fj
Control and Treatment Technology for the Metal Finishing Industry Series: In-Plant Changes 625/8-82/008 fj
Sulfur Oxides Control Technology Series: FGD Spray Dryer Process 625/8-82/009 Q
Fine Pore (Fine Bubble) Aeration Systems 625/8-85/010 D
Technology Assessment of Sequencing Batch Reactors 625/8-86/011 D
Causes and Control of Activated Sludge Bulking and Foaming 625/8-87/012 fj
Biomonitoring to Achieve Control of Toxic Effluents 625/8-87/013 Q
Compendium of Technologies Used in Treatment of Hazardous Wastes 625/8-87/014 fj
Biomonitoring for Control of Toxic Effluent Discharges to the Marine Environment 625/8-89/015 D
In-Vessel Composting of Municipal Wastewater Sludge 625/8-89/016 D
• Optimizing Water Treatment Plant Performance with the Composite Correction Program 625/8-90/017 fj

EXECUTIVE BRIEFINGS
Injection Well Mechanical Integrity 625/9-89/007 fj
Experiences in Incineration Applicable to Superfund Site Remediation 625/9-88/008 D
Volumetric Tank Testing: An Overview 625/9-89/009 n

ENVIRONMENTAL REGULATIONS AND TECHNOLOGY PUBLICATIONS
The Electroplating Industry 625/10-85/001 D
Use and Disposal of Municipal Wastewater Sludge 625/10-84/003 O
Fugitive VOC Emissions in the Synthetic Organic Chemicals Manufacturing Industry 625/10-84/004 n
The National Pretreatment Program 625/10-86/005 fj
Control of Pathogens in Municipal Wastewater Sludge 625/10-89/006 fj
If you are not on the mailing list for the Technology Transfer Newsletter, do you want to be added? Yes Q No
If you are on the mailing list for the Technology Transfer Newsletter, do you want to remain? Yes Q No
Name
Company
Street
City/State/Zip Code
• Publication listed for first time.
Forward to: CERI, Technology Transfer, U.S. Environmental Protection Agency, P.O. Box 19963, Cincinnati, OH 45219-0963.
-------