United States
 Environmental Protection
 Agency
21T-3030
April 1991.
 Pesticides And Toxic Substances (H-7506C)	
 Protecting  Endangered
 Species

 Interim  Measures
 Polk County, Tennessee
   The information in this pamphlet is
   similar to what the U.S. Environmental
 Protection Agency (EPA) expects to
 distribute once our Endangered Species
 Protection Program is in effect. The
 limitations on pesticide use are not law at
 this time, but are being provided now for
 your use in voluntarily protecting
 endangered and threatened species from
 harm due to pesticide use. We encourage
 you to use this information. We also
 welcome your comments.
  The Endangered Species Act is intended
 to protect and promote recovery of animals
 and plants that are in danger of becoming
 extinct due to the activities of people.
 Under the Act, EPA must ensure that use
 of pesticides it registers will not result in
 harm to the species listed as endangered or
 threatened by the U.S. Fish and Wildlife
 Service,  or to habitat critical to those
 species'  survival. To accomplish this, the
 EPA expects to implement program
 requirements beginning in 1991. This
 program will protect endangered and
 threatened species from harm due to
 pesticide use.
  EPA requests your comments regarding
 the information presented in this
 publication. Please drop us a line to let us
 know whether the information is clear and
 correct. Also tell us to what extent
 following the recommended measures
 would affect your typical pesticide use or
productivity. This information will be
considered by EPA during the final stages
of program development.
             Please submit comments to:
            Interim Endangered Species
            Protection Program (H7506C)
   Public Docket and Information Section
                            U.S. EPA
                     401 M Street, SW
                 Washington, DC 20460
  About This Publication

  This publication contains a County Map
  showing the area within the county where
  pesticide use should be limited to protect
  listed species. These areas are identified on
  the map by a shaded pattern.  Each shaded
  pattern corresponds to a species in need of
  protection.
    The Shading Key shows the name of the
  species that each shaded pattern represents
  and describes the shaded area. The area
  may be described in terms of Township,
  Range, and Section or by giving details
  about the habitat of the species.
    The firs): column of the "Table of Pesticide
  Active Ingredients" lists the active
  ingredients for which there should be
  limitations on use to protect certain species.
  The next columns are headed by the shaded
  pattern of the species with Codes listed
  underneath them.
    The Code indicates the specific limitation
  that is necessary to protect the species. The
  section titled Limitations on  Pesticide Use
  explains the code.

  Does This Information  Apply To
  You?                     ™y

  To determine whether this information
  applies to your use of a pesticide, review
  the questions below. The information
  applies only if you answer "yes" to both
  questions:

  •  Do you intend to use pesticides within
  the shaded area on the  county map?

  •  Are any of the ingredients listed on the
  front pane] of your pesticide product label
  named in the "Table of  Pesticide Active
  Ingredients"?

    If you answer "yes" to both questions,
  you should follow the instructions on "How
  to Use This Information" to determine if
  you should limit use of  the pesticide to help
  protect listed species.
    If you answer "no" to either question,
  you should  follow the usage  directions  on
  the pesticide product label.
                                                           Printed on Recycled Paper

-------
How To Use This Information


1) On the county map, find the specific shading patterns
   that cover the area where you will apply pesticides.

2) Read the shading key for those patterns to identify
   the specific area involved.

3) In the 'Table of Pesticide Active Ingredients," locate
   the active ingredients in the pesticide you intend
   to apply.

4) Locate the code to the right of the active ingredient
   name and under the shading patterns that apply
   to you.

5) When using the pesticide, you should follow the
   limitations  indicated for those codes described under
   "Limitations on Pesticide Use."

6) If you are applying more than one listed active
   ingredient  or applying a listed active ingredient in
   an area with more than one shaded pattern (species),
   multiple codes may apply. If so, you should follow
   the most restrictive limitation.
Table Of Pesticide Active Ingredients
Active Ingredient
Shading Pattern Code
OXYFLUORFEN
            33
Limitations On Pesticide Use

Code   Limitation

  33    Do not apply within one-quarter mile of
        species habitat.

-------
  Polk County, Tennessee
          N
 Legend
     County Border
     County Seot
     City

     U.S. Highway
—  Park, Reservation,
      Forest, Refuge
     River, Stream, Creek
     Lake, Reservoir
                                                  Cherokee National  Forest
Shading Key
                                                                                         COPPERHILL
         Ruth's golden aster, Pityopsis ruthii (Asteraceae, the aster family). Within the shaded area
         shown on the map, use limitations only apply along the margins of the streams.

-------
Official Busi
Penalty for!
$300
3. a>
§.ŧ
 m c IMI
PUS
3-^ 5 21 "*^
P SŪ
O —
o -o
2 1

-------