United States
Environmental Protection
Agency
Pesticides and
Toxic Substances (H7506C)
21T-3047
September 1991
Protecting Endangered
Species
Interim Measures
Bradley County, Tennessee
The information in this pamphlet is similar to
what the U.S. Environmental Protection
Agency (EPA) expects to distribute once our
Endangered Species Protection Program is in
effect. The limitations on pesticide use are not
law at this time, but are being provided now for
your use in voluntarily protecting endangered and
threatened species from harm due to pesticide
use. We encourage you to use this information.
We also welcome your comments.
The Endangered Species Act is intended to
protect and promote recovery of animals and
plants that are in danger of becoming extinct due
to the activities of people. Under the Act, EPA
must ensure that use of pesticides it registers will
not result in harm to the species listed as
endangered or threatened by the U.S. fish and
Wildlife Service, or to habitat critical to those
species' survival. To accomplish this, the EPA
expects to implement program requirements
beginning in 1993. This program will protect
endangered and threatened species from harm due
to pesticide use.
EPA requests your comments regarding the
information presented in this publication. Please
let us know whether the information is clear and
correct. Also tell us to what extent following the
recommended measures would affect you typical
pesticide use or productivity. This information
will be considered by EPA during the final stages
of program development.
Please submit comments to:
Interim Endangered Species
Protection Program (H7506C)
U.S.EPA
401M Street, SW
Washington, DC 20460
Recycled/Recyclable
Printed on paper that contains
at least 50% recycled fiber
About This Publication
This publication contains a County Map
showing tltie Area within the county where
pesticide use should be limited to protect listed
species. These areas are identified on the map by
a shaded pattern. Each shaded pattern
corresponds to a species in need of protection.
The Shading Key shows the name of the species
that each shaded pattern represents and describes
the shaded, area. The area may be described in
terms of Township, Range, and Section or by
giving details about the habitat of the species.
The first column of the 'Table of Pesticide
Active Ingredients" lists the active ingredients for
which there should be limitations on use to
protect certain species. The next columns are
headed by the shaded pattern of the species with
Codes listed underneath them.
The Code indicates the specific limitation that
is necessary to protect the species. The section
titled Limitations on Pesticide Use explains the
code.
Does Thiis Information Apply to You?
To determine whether this information applies
to your use of a pesticide, review the questions
below. The information applies only if you
answer "yes" to both questions:
Do you intend to use pesticides within the
shaded, area on the county map?
Are any of the ingredients listed on the front
panel of your pesticide product label named
in the "Table of Pesticide Active
Ingredients"?
If you answer "yes" to both questions, you
should follow the instructions on "How to Use
This Information" to determine if you should
limit use of the pesticide to help protect listed
species.
If you answer "no" to either question, you
should follow the usage directions on the
pesticide product label.
-------
How To Use This Information
1) On the county map, find the specific shading patterns that cover the area where you will apply pesticides.
2) Read the shading key for those patterns to identify the specific area involved.
3) In the 'Table of Pesticide Active Ingredients," locate the active ingredients in the pesticide you intend to apply.
4) Locate the code to the right of the active ingredient name and under the shading patterns that apply to you.
5) When using the pesticide, you should follow the limitations indicated for those codes described under "Limitations on
Pesticide Use."
6) If you are applying more than one listed active ingredient or applying a listed active ingredient in an area with more
than one shaded pattern (species), multiple codes may apply. If so, you should follow the most restrictive limitation.
7) Read the information on Reducing Runoff and Drift on the back of this pamphlet.
Bradley County, Tennessee
Legend
County Border
® County Seat
or City
U.S., State Highway
River, Stream, Creek
1 mi
km
Shading Key
Amber darter, Percina antesella.
Conasauga logperch, Percina jenkinsi.
Snail darter, Percina tanasi.
-------
Table of Pesticide Active Ingredients
Active Ingredient
Shading Pattern
Active Ingredient
Shading Pattern
^%
Code TAR
ACEPHATE 101 —
ALDICARB 101 —
ATRAZINE 101 —
AZINPHOS-METHYL 2 1.5
BENOMYL 101 —
BENSULIDE 101 —
BIFENOX 101 —
CAPTAN 101 —
CARBARYL 2 —
CARBOFURAN (granular) 101 —
CARBOPHENOTHION 2 —
CHLOROTHALONIL 101 —
CHLORPYRIFOS
Alfalfa, Apples 41 —
All Other Uses 101 —
COPPER SULFATE, BASIC 101 —
CYPERMETHRIN
Lettuce, Cabbage — —
DEF 2 —
DIAZINON 2,10 —
DICOFOL 101 —
DICROTOPHOS 2 02
DIFLUBENZURON 101 —
DIMETHOATE 101 —
DISULFOTON 101 —
DIURON 101 —
ENDOSULFAN 101 —
ETHION 2 0.5
ETHOPROP 101 —
FENAMIPHOS 2 —
FENITROTHION — —
FENSULFOTHION 2 —
FENVALERATE 101 —
Limitations On Pesticide Use
» + 4 4 4 • • .:.,.,,.,,
********** ^////s
* Code TAR* Code TAR*
101 — FLURIDONE 20 —
101 — FONOFOS 101 —
101 — ISOFENPHOS 101 —
299 1.5 MALATHION 210
101 — MANCOZEB 101 —
101 — METHIDATHION 2 —
101 — METHOMYL 101 —
101 — METHOPRENE
2 — METHYL PARATHION 101 —
101 — MEVINPHOS 2 —
2 — NALED 101 —
101 — NITRAPYRIN 101 —
OXAMYL 101 —
41 — OXYDEMETON-M ETHYL 101 —
101 — OXYFLUORFEN 101 —
101 — PARATHION (ETHYL) 210
PENDIMETHALIN 101 —
3 — PERMETHRIN 2 0.04
2 — PHORATE ; 2 —
2,10 — PHOSMET 2
101 — PHOSPHAMIDON 101 —
299 0.2 PROFENFOS 2 —
101 — PROPACHLOR : 101 —
101 — PROPARGITE 101 —
101 — PROPAZINE 101 —
101 — PYRETHRINS 2,10 —
101 — SULPROFOS 101 —
299 0.4 TERBUFOS 101
101 — TERBUTRYN 101 —
2 — THIODICARB 101 —
101 — THIOPHANATE-METHYL 101 —
2 — TRICHLORFON 2 —
101 — TRIFLURALIN 101 ~*
V«V«%
**V*V«
Code TAR*
20 —
101 —
101 —
210
101 —
2 —
101 —
1rt1
101 —
2 - I.
101 —
101 —
101 —
101 —
101 —
2in
101 —
2 0.04
2 —
2 —
101 —
2
101 —
101 —
101 —
2 —
101 —
101 —
101 —
101 —
101 —
299 3.8
101 —
2 Do not use within 40 yards of the water's edge for ground applications, nor within 200 yards for aerial applications.
3 Do not use within 100 yards of the water's edge for ground applications, nor within 1/4 mile for aerial applications.
10 For mosquito latvicide use, do not apply directly to water within 1 mile upstream from the shaded area nor within
400 yards downstream for aerial applications.
20 Do not apply directly to water within the shaded area.
41 Do not apply this pesticide within 1/4 mile of the water's edge for ground applicatiions, nor within 1/2 mile for aerial
applications.
101 Read the information on Reducing Runoff and Drift on the back of this pamphlet.
299 Do not apply above the threshold application rate (TAR) indicated, and do not use within 40 yards of the water's
edge for ground applications, nor within 200 yards for aerial applications.
TAR = Threshold Application Rate (Pounds of active ingredient per acre per application)
-------
Reducing Runoff and Drift
Careful use of pesticides can diminish harm to the environment and reduce exposure of endangered and
threatened species to pesticides. Using pesticide runoff and drift measures may be helpful in keeping more
of the applied pesticide on the field and may also lower your costs of pesticides.
Runoff
Where possible, use methods which reduce soil erosion, such as limited till and contour plowing; these
methods also reduce pesticide runoff.
Where feasible, use application techniques such as T banding and in-furrow techniques, which incorporate
the pesticide into the soil.
Pesticides with ground water warning labels are more likely to enter ground and surface water than those
without such warnings. When possible, use a pesticide that does not contain a ground water warning label.
Keep informed about changing weather conditions, and try to avoid pesticide application when heavy
rainfall is expected.
Drift
Wind direction, speed, and evaporation are important factors in reducing drift. Most importantly,
pesticides should be applied when the wind direction is away from areas of concern; try to avoid applica-
tion during periods of high winds. Avoiding applications during the hottest part of the day, when evapora-
tion is highest, will further reduce drift.
When high winds and excessive evaporation are not present, a drift retardant may be useful for aerial
applications.
Using the largest droplet size compatible with the pesticide coverage will reduce drift. Typically, higher
spray volumes will also result in less drift.
For the Protection of Your Land, Always Read and Follow Label Directions
United States
Environmental Protection
Agency
(H7506C)
Washington, DC 20460
Official Business
Penalty for Private Use
$300
------- |