-------

-------
                                            CAS Registry Number:   597-64-8
                                            Page 2 of 3
                           TETRAETHYLTIN
SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  This is a liquid organotin  pesticide  (Hayes
    1982,  p.  37).  This material may burn but does not ignite  readily.
    Extinguish small  fires  with dry chemical, carbon dioxide,  water spray or
    foam.   For large  fires, use water spray, fog,  or foam (DOT 1984, Guide 55),

    Special Fire Fighting  Procedures:  This is a liquid  organotin  pesticide
    (Hayes 1982,  p. 37).  Fight fire from maximum distance.  Dike  fire control
    water  for later disposal; do not scatter the material (DOT 1984, Guide 55),

    Unusual  Fire and Explosion Hazards:  When heated to decomposition,  it
    emits  acrid smoke and fumes (Sax 1984, p. 2527).


SECTION  IV  -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):   (Non-Specific  --  Organic Tin
    Compounds)   Strong oxidizers (NIOSH/OSHA 1978, p.  180)

    Hazardous  Decomposition or Byproducts:  Acrid smoke and  fumes are
    emitted upon decomposition by heat (Sax 1984,  p. 2527).

    Hazardous  Polymerization:   May Occur:   Not Found
                               May Not  Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Yes  (Sax 1984, p. 2527)
                      Ingestion:   Yes (Sax 1984,  p.  2527)
     o
    Health Hazards (Acute, Delayed,  and  Chronic):  Toxic hazard rating is
    high for  oral,  intravenous, intraperitoneal administration (Sax  1984, p.
    2527). This  material  causes swelling of the brain and  spinal  cord  (Hayes
    1982,  p.  37).

-------
                                            CAS Registry Number:   597-64-8
                                            Page 3 of 3
                           TETRAETHYLTIN
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Signs and Symptoms of Exposure:   (Non-Specific -- Tetrasubstituted Tin
    Compound). Exposure  may result in muscular weakness and paralysis,  leading
    to respiratory  failure; convulsive movements; closure of eyelids  and
    sensitivity  to  light (Clayton and Clayton 1981-82,  p.  1955); headaches,
    and EEC changes  (Doull 1980, p. 458); dizziness,  psychological  and
    neurological disturbances, sore throat, cough, abdominal pain,  nausea, and
    vomiting (NIOSH/OSHA 1978, p. 181).

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid  Procedures:  This is a liquid organotin
    pesticide (Hayes  1982, p. 37).  Move victim to fresh air;  call  emergency
    medical care.   If not breathing, give artificial respiration.   If
    breathing is difficult, give oxygen.  In case of contact with material,
    immediately  flush skin or eyes with running water for at least  15
    minutes.   Speed  in removing material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes  at the site.   Keep
    victim quiet and  maintain normal body temperature.   Effects may be
    delayed;  keep victim under observation (DOT 1984, Guide 55).,


SECTION  VI  --  USE  INFORMATION

    (Non-Specific --  Organotin Compounds)  Used as biocides, bactericides,
    fungicides and  insecticides; preservatives for wood, textile, paper, and
    leather (Clayton  and Clayton 1981-82, p. 1953).  Not registered as  a
    pesticide in the  U.S.  (USEPA/Active Ingredients 1985).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING  AND  USE
(Steps to be Taken  in Case Material is Released or Spilled)

    This is a liquid  organotin pesticide (Hayes 1982, p. 37).  Do not touch
    spilled material; stop leak if you can do so without risk. Use water
    spray to reduce vapors.  Small spills:  absorb with sand or other
    noncombustible  absorbent material and place into containers for later
    disposal.   Large  spills:  dike far ahead of spill for later disposal  (DOT
    1984,  Guide  55).

-------
                                     CAS Registry Number:   614-78-8
                                     Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October 13,  1985
                                                  Revision:
CHEMICAL  IDENTITY --  THIOUREA, (2-METHYLPHENYL)-

CAS Registry Number:  614-78-8

Synonyms:   (NIOSH/RTECS  1983 Synonyms, Volume 3,  p.  890)  Urea,
2-Thio-l-o-Tolyl-; o-Tolyl Thiourea; l-o-Tolyl-2-Thiourea

Chemical  Formula:  C0Hn.N0S
                    o lu 2.

Molecular Weight:  166.26


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  ID,   oral (rat)
    5 mg/kg  (*NIOSH/RTECS 1985)


SECTION II  --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:  Not Found

    Specific  Gravity  (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  304-306°F, 151-152°C (Sax 1984, p. 2601);  324°F,  162°C
    (Weast 1984, p. C-539)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl  acetate=l):  Not Found

    Solubility in Water:   Very soluble (Weast  1979, p. C-540)

    Appearance and Odor:  Crystalline solid (Sax 1984, p. 2601)

-------
                                      CAS  Registry  Number:  614-78-8
                                      Page 2 of 3
                   THIOUREA,  (2-METHYLPHENYL)-
SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:  Not Found

    Extinguishing Methods:  (Non-Specific  -- Poisonous Solid, n.o.s.)   For
    small  fires  use dry chemical, carbon dioxide, water spray, or foam.   Use
    water  spray,  fog, or foam on larger fires.   Move container from fire area
    if you can do so without risk (DOT 1984,  Guide 53).

    Special  Fire Fighting  Procedures:   (Non-Specific -- Poisonous Solid,
    n.o.s.)   Wear self-contained (positive  pressure if available) breathing
    apparatus and full protective clothing  (DOT 1984, Guide 53).

    Unusual  Fire and Explosion Hazards:  When heated  to  decomposition, it
    emits  very toxic fumes of oxides of nitrogen and sulfur (Sax 1984,
    p. 2601).


SECTION  IV --  REACTIVITY DATA

    Stability: Unstable:   Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it emits very toxic fumes of oxides of  nitrogen and sulfur (Sax 1984,
    p. 2601).

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:   Not Found
                      Skin:  Not Found
                      Ingestion:   Yes (Sax  1984, p. 2601)

    Health Hazards (Acute,  Delayed,  and Chronic):  The material is  highly
    toxic  if orally  ingested (Sax 1984, p.  2601).

-------
                                      CAS Registry Number:   614-78-8
                                      Page 3 of 3


                    THIOUREA,  (2-METHYLPHENYL)-


SECTION  V -- HEALTH  HAZARD DATA (Continued)

    Signs and Symptoms of Exposure:  Not Found

    Medical  Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:   (Non-Specific  -- Poisonous Solid,
    n.o.s.)   Move  victim to fresh air and call  emergency  medical care.  Remove
    and isolate  contaminated clothing and shoes  at  the site.  In case of
    contact  with the material, immediately flush skin or  eyes with running
    water for at least 15 minutes (DOT 1984, Guide  53).


SECTION  VI --  USE INFORMATION

    Not Found
SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken  in Case Material is Released or  Spilled)

    (Non-Specific -- Poisonous Solid, n.o.s.)   Keep unnecessary people away,
    isolate hazard  area and deny entry.  Stay  upwind  and keep out of low
    areas.  Wear self-contained breathing apparatus and full protective
    clothing.   Do not touch spilled material,  stop  leak if you can do so
    without risk.   Absorb small spills with sand or other noncombustible
    material and place into containers for later disposal.  For large spills,
    dike far ahead  of spill for later disposal (DOT 1984, Guide 53).
COMMENTS

    Sources  searched but no information found:
        ACGIH 1983
        NIOSH/OSHA  1978
        Hawley 1981
        Merck 1983
        NFPA 1984
        Student 1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton and Clayton 1981-82
        Arena 1979
        Gosselin 1984
        Encyc Occupat Health and Safety 1983
        Gilman 1985
        Verschueren 1983

-------
                                           CAS  Registry Number:  624-83-9
                                           Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October  31. 1985
                                                   Revision:
CHEMICAL IDENTITY -- METHYL ISOCYANATE

CAS Registry Number:  624-83-9

Synonyms:  Isocyanic Acid, Methyl  Ester; MIC; Iso-Cyanatomethane;
Isocyanatomethane; Methane,  Isocyanato-

Chemical Formula:   C H  NO

Molecular Weight:  57.05


SECTION  I - HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  0.02 ppm (0.05  mg/m3) (NIOSH/OSHA  1978, p. 130)

    ACGIH TLV:  0.02  ppm (0.05 mg/mj)  (skin) (ACGIH 1983, p. 26)

    IDLH:  20 ppo (NIOSH/OSHA 1978, p. 130)

    Other Limits Recommended:  Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   102°F, 39°C (NIOSH/OSHA 1978,  p. 130)

    Specific Gravity (H20=l):  0.9599 at  20°C/20°C  (*Sax 1979)

    Vapor Pressure (mmHg):   348 at 20°C (*ACGIH  1980)

    Melting Point:   -112°F, -80°C (NIOSH/OSHA  1978, p. 130)

    Vapor Density (AIR=1):   About twice as heavy as air (Worthy  1985, p. 27)

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility in Water:   6.7  g/100 ml  (NIOSH/OSHA  1978, p. 130)

    Appearance and Odor:   Colorless  liquid.(*Hawley  1981); sharp odor
    (NIOSH/OSHA  1978, p. 130)

-------
                                      CAS Registry Number:  624-83-9
                                      Page 2 of 4
                         METHYL  ISOCYANATE
SECTION  III -- FIRE AND  EXPLOSION HAZARD  DATA

    Flash  Point (Method Used):  19°F, -7°C (CC) (*NFPA 1978)
    Flammable Limits:
        LEL:  5.3 percent  (*NFPA 1978)
        UEL:   26 percent (*NFPA 1978)

    Extinguishing Methods:  Small fires:  dry chemical,  carbon  dioxide,
    water  spray,  or  foam.   Large fires:  water spray, fog,  or foam (DOT  1984,
    Guide  30).

    Special  Fire Fighting Procedures:  Material is extremely hazardous to
    health but  areas may be entered with extreme care.  Full protective
    clothing,  including self-contained breathing apparatus  (coat,  pants,
    gloves,  boots, and bands around  legs, arms and waist) should be provided.
    No skin surface  should  be exposed (*NFPA 1978).  Stay away from ends of
    tanks.  Do  not get water inside  container.  Spray cooling water on
    containers  that  are exposed to flames until well after  fire  is out.
    Withdraw immediately in case of  rising sound from venting safety device or
    *ny discoloration of tank due to fire (DOT 1984, Guide  30).

    Unusual Fire and Explosion Hazards:  Reacts violently with water (*NFPA
    1978).  Extremely flammable; may be ignited by heat,  sparks, or flames.
    Vapors may  travel to a  source of ignition and flash back. Container may
    explode violently in heat of fire.  Vapor explosion and poison hazard
    indoors, outdoors, or in sewers.  Runoff to sewer may create fire or
    explosion hazard (DOT 1984, Guide 30).


SECTION  IV — REACTIVITY DATA

    Stability:   Unstable:  Yes  (*NFPA 1978)
                 Stable:

        Conditions to Avoid: Avoid  heat, flame, oxidizers, water (*Sax
        1979).

    Incompatibility  (Materials to Avoid):  Water, acids, alkali,  amines,
    iron,  tin,  copper, and  other catalysts (*Sittig 1981).

    Hazardous  Decomposition or Byproducts:  When heated to decomposition,
    it emits toxic fumes of nitrogen oxides (Sax 1984, pp.  1863-4).

-------
                                      CAS Registry  Number:  624-83-9
                                      Page 3 of 4
                         METHYL  ISOCYANATE
SECTION  IV -- REACTIVITY DATA  (Continued)

    Hazardous  Polymerization:  May Occur:  Yes (Worthy 1985,  p.  28)
                               May Not Occur:

        Conditions to Avoid:   Methyl  isocyanate  (MIC) will react with
        water,  or in the  presence of  catalysts (such as sodium hydroxide,
        sodium  methoxide,  triphenylarsine, triethyl phosphine, metallic
        chlorides) to  form either a cyclic trimer (trimethyl isocyanurate) or
        a gummy,  resinous  polymer.  These  reactions are exothermic, producing
        about 540 Btu  per  pound of MIC.  Heat produced in these reactions  may
        result  in pressure build up and rupturing of tanks (Worthy 1985, p.
        28).
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (*NIOSH/RTECS 1985)
                       Skin:   Yes  (Sax  1984, p.  1864)
                       Ingestion:  Yes  (Dagani 1985, p. 37)

    Health Hazards  (Acute, Delayed,  and Chronic):   This  compound is  a  skin
    irritant and can cause permanent eye damage  (*ACGIH 1980).   A
    concentration of 2  ppm has been reported toxic in humans (*NIOSH/RTECS
    1985).  Methyl isocyanate  attacks the respiratory system, eyes and skin.
    It can injure the lungs and  bronchial airways, cause permanent eye damage,
    auJ death.  Death has  been attributed to various forms of respiratory
    disti  ss (Dagani 1985,  p.  38).

    Signs and Symptoms of Exposure:   Initial  symptoms  include  burning of
    the eyes and throat and coughing, followed by vomiting, choking and
    shortness of breath.   Collapse and  unconsciousness have also been noted.
    Ulcers may form on  the corneas, causing blindness.  Recurring symptoms
    include excessive watering rf the eyes, painful sensitivity to strong
    lights, breathlessness, coughing, dizziness, disorientation, loss of
    appetite, skin rashes  and  extreme fatigue.  Damage to the nervous system
    is also suspected (Dagani  1985, p.  38).

    Medical Conditions  Generally Aggravated by  Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air;  call
    emergency medical care.  If  not breathing, give artificial respiration.
    If breathing is difficult, give oxygen.  Remove and isolate contaminated
    clothing and shoes  at  the  site.  In case of contact with material,
    immediately flush skin or  eyes with running water for at least 15
    minutes.  Keep victim  quiet  and maintain normal body temperature.  Effects
    may be delayed; keep victim  under observation (DOT 1984, Guide 30).

-------
                                      CAS Registry Number:  624-83-9
                                      Page 4 of 4
                         METHYL  ISOCYANATE
SECTION  VI  --  USE  INFORMATION

    Methyl isocyanate is  used as an intermediate in the manufacturing of
    N-methylcarbamate ester  and N-methylurea insecticides and herbicides,  such
    as the carbaryl  insecticide Sevin, the aldicarb insecticide Terraik,
    additional insecticides  carbofuran, methomyl, bendiocarb, and oxamyl,  and
    the herbicides methazole and tebuthiuron (Chera. & Eng. News, December  10,
    1984,  p.  7).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to  be  Taken in Case Material is Released or Spilled)

    Keep unnecessary people  away;  isolate hazard area and deny entry.  Stay
    upwind; keep  out of  low  areas.  Wear positive pressure breathing apparatus
    and special protective clothing.  Shut off ignition sources; no flares,
    smoking or flames in  hazard area.  Do not touch spilled material; stop
    leak if you can  do so without  risk.  Use water spray to reduce vapors, do
    not get water inside  container.  Small spills:  flush area with flooding
    amounts of water.  Large spills:  dike far ahead of spill for later
    disposal  (DOT 1984, Guide 30).  For small quantities, absorb on paper
    towels.   Evaporate in safe place such as a fume hood.  Allow sufficient
    time for  vapors  to completely  clear the hood ductwork.  Burn the paper in
    a suitable location away from  combustible materials.  Reclaim and atomize
    large  quantities in a combustion chamber with an effluent gas cleaning
    device.   Do not  allow this gas to enter a confined space such as a sewer
    because of thu possibility of  an explosion (*NIOSH/OSHA 1981).

-------
                                     CAS Registry  Number:  624-92-0
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  METHYL DISULFIDE

CAS Registry  Number:  624-92-0

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume 2, p. 173):  Bisulfide,
Dimethyl; Dimethyldisulfide

Chemical Formula:   C.H,S.
                    2. O i

Molecular Weight:  94.20


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity  information:  LC5Q  inhalation
    (mouse) 0.0123 mg/liter/2 hours (*NIOSH/RTECS 1985) (SUSPECT)


SECTION  II  -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:   229.5°F, 109.7°C (Sax 1984, p.  1156)

    Specific Gravity (H20=l):  i.0569  at 25°C  (Sax 1984, p. 1156)

    Vapor Pressure (mmHg):  28.6 at 25°C  (Sax 1984, p. 1156)

    Melting Point:   -120.5°F, -84.72°C (Clayton and Clayton 1981-82,
    p.  2064)

    Vapor Density (AIR=1):  3.24 (Sax 1984, p. 1156)

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility  in Water:   Insoluble (Clayton and Clayton 1981-82, p.  2062)

-------
                                      CAS Registry Number:  624-92-0
                                      Page 2 of 4
                         METHYL DISULFIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Appearance and Odor:  Liquid (Sax 1984, p. 1156);  odor detection limit
    is 0.33 to 1.2  ppb  in water  (Clayton and Clayton 1981-82,  p.  2087)


SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  44.6°F (Sax 1984,  p.  1156)
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:   (Non-Specific -- Dimethylsulfide)  Small
    fires:   dry chemical, carbon dioxide, water spray, or  foam.   Large fires:
    water  spray,  fog, or foam.  Move container from fire area if  you can do so
    without risk.   Spray cooling water on containers that  are exposed to
    flames  until  well after fire is out.   Fight fire from  maximum distance.
    Dike fire  control water for  later disposal; do not scatter the material
    (DOT 1984,  Guide 57).

    Special  Fire Fighting Procedures:  (Non-Specific --  Dimethylsulfide)
    Keep unnecessary people away; isolate hazard area and  deny entry.  Stay
    upwind;  keep  out of  low areas.  Ventilate closed spaces  before entering
    them.   Wear positive pressure breathing apparatus and  special protective
    clothing (DOT 1984, Guide 57).

    Unusual Fire and Explosion Hazards:   (Non-Specific -- Dimethylsulfide)
    May be  ignited by heat, sparks or flames.  Container may explode in heat
    of fire.   Vapor explosion and poison hazard indoors, outdoors or in sewers
    (DOT 1984,  Guide 57).
SECTION  IV  --  REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):  Oxidizing materials  (Sax  1984,
    p.  1156)

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it  emits  very toxic fumes of sulfur oxide (Sax 1984,  p. 2482).  Photo-
    chemically,  it is  oxidized by ozone (Clayton and Clayton  1981-82,
    p.  2087).

-------
                                      CAS Registry Number:   624-92-0
                                      Page 3 of 4
                        METHYL DISULFIDE
SECTION  IV  --  REACTIVITY DATA (Continued)

    Hazardous Polymerization:  May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:   Yes (Sax 1984,  p.  1156)
                      Skin:  Not Found
                      Ingestion:   Not Found

    Health Hazards (Acute,  Delayed,  and Chronic):  This is highly toxic  by
    inhalation.  Health hazards resemble those of  sulfides and alkyl
    disulfides  (Sax  1984, p. 1156).

    Signs and Symptoms of  Exposure:  Not Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid Procedures:   (Non-Specific  -- Dimethylsulfides)
    Move victim  to fresh air; call emergency medical  care.  If not breathing,
    give artificial  respiration.  If breathing is  difficult, give oxygen.  In
    case of contact with material,  immediately flush  skin or eyes with running
    water for at least 15 minutes.   Speed in removing material from skin is  of
    extreme importance.  Remove and isolate contaminated  clothing and shoes  at
    the site.  Keep victim quiet and maintain normal  body temperature.
    Effects may  be delayed,  keep victim under observation  (DOT 1984, Guide 57).


SECTION  VI  --  USE INFORMATION

    Not Found.
SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or  Spilled)

    Do not breathe  vapor.  Wear positive pressure breathing apparatus (see
    Section V above).   (Non-Specific -- Dimethylsulfide)   Shut  off ignition
    sources; no  flares, smoking, or flames in hazard  area.  Do  not touch
    spilled material; stop leak if you can do so without  risk.  Use water
    spray  to reduce vapors.  Small spills:  absorb  with sand or other
    noncombustible  absorbent material and place into  containers for later
    disposal.  Large spills:  dike far ahead of spill for later disposal (DOT
    1984,  Guide  57).

-------
                                      CAS Registry Number:   624-92-0
                                      Page 4 of 4
                        METHYL DISULFIDE

COMMENTS

    Sources  searched but no information found:
        ACGIH  1983
        NIOSH/OSHA  1978
        Hawley 1981
        Merck  1983
        NFPA 1984
        Student  1981
        Weiss  1980
        CHRIS  1978
        Doull  1980
        Arena  1979
        Gosselin 1984
        Encyc  Occupat Health and Safety 1983
        Buchel  1983
        Farm Chemicals Handbook 1984
        Hayes  1982
        Physicians' Desk Reference 1985
        Oilman  1985

-------
                                     CAS Registry Number:  625-55-8
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- ISOPROPYL FORMATE

CAS Registry  Number:  625-55-8

Synonyms*  (NIOSH/RTECS 1983 Synonyms, Volume 2, p. 339)  Formic Acid,
Isopropyl  Ester; NCI-C60106

Chemical Formula:   C4Hg02

Molecular  Weight:  88.12


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD   oral  (guinea

    pig) 1.4 mg/kg (-'-NIOSH/RTECS  1985) (SUSPECT)


SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:   154.8°F, 68.2°C (Weast 1979, p.  C-310)

    Specific Gravity (H20=l):  0.8728  (Weast 1979, p. C-310)

    Vapor Pressure (mmHg):  100  at 17.8°C (Sax 1984, p. 1659)

    Melting Point:   Not Found

    Vapor Density (AIR=1):   3.03  (Sax 1984, p.  1659)

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:   Slightly soluble (Clayton  and Clayton 1981-82,
    p.  2264)

    Appearance and Odor:   Clear liquid, pleasant  odor  (Clayton and Clayton
    1981-82, p. 2264)

-------
                                            CAS Registry Number:  625-55-8
                                            Page 2 of 3
                         ISOPROPYL  FORMATE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  22°F, -5.6°C (CC)  (Clayton  and  Clayton
    1981-82, p. 2264)
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Small fires:   dry chemical,  carbon dioxide,
    water  spray,  or  foam.  Large fires:  water spray, fog,  or foam.   Move
    container from fire area  if you can do it without risk.  Cool containers
    that are exposed to flames with water from the side until well after fire
    is out.   For  massive  fire in cargo area, use unmanned hose holder or
    monitor  nozzles; if this  is impossible, withdraw from area and let  fire
    burn.  Withdraw  immediately in case of rising sound from venting safety
    device or any discoloration of tank due to fire (DOT 1984,  Guide 27).

    Special  Fire Fighting  Procedures:  Wear self-contained (positive
    pressure if available) breathing apparatus and full protective clothing.
    Isolate  for 1/2  mile  in all directions if tank car or truck is involved  in
    fire (DOT 1984,  Guide 27).

    Unusual  Fire and Explosion Hazards:  Vapors may travel to a source of
    ignition and  flash back.  Container may explode in heat of fire.  Vapor
    explosion hazard indoors, outdoors or in sewers.  Runoff to sewer may
    create fire or explosion hazard  (DOT 1984, Guide 27).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:   Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):  Reacts vigorously with oxidizing
    materials (Sax 1984,  p. 1659).

    Hazardous  Decomposition or Byproducts:  Not Found

    Hazardous  Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  625-55-8
                                            Page 3 of 3
                         ISOPROPYL  FORMATE
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Clayton and Clayton 1981-82,
                                  p. 2264)
                      Skin:   Yes  (Clayton and Clayton 1981-82, p. 2264)
                      Ingestion:  Yes (Sax 1984,  p.  1659)

    Health Hazards  (Acute, Delayed,  and  Chronic):  Vapor produces eye and
    nose irritation, while the liquid produces eye and skin irritation
    (Clayton and Clayton  1981-82, p. 2265).

    Signs and Symptoms of Exposure:  (Non-Specific  -- Ethyl Formate)
    Inhalation of vapor can cause irritation of eyes  and nose.   High
    concentrations can cause unconsciousness in .a few minutes,  with death
    within a few hours.   Contact with liquid formic acid,  isopropyl ester can
    cause irritation of eyes and skin.  Ingestion can result in irritation of
    the mouth and stomach, with  loss of consciousness and death occurring if
    untreated (Clayton and Clayton 1981-82, p. 2265;  Weiss  1980, p. 446).

    Medical  Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and First  Aid  Procedures:  Move victim to fresh air;  call
    emergency medical care.  If not breathing, give artificial  respiration.
    If breathing is  difficult, give oxygen.  In case  of contact with  material,
    immediately flush eyes with  running water for at  least  15 minutes.  Wash
    skin with soap and water.  Remove and isolate contaminated clothing and
    shoes at the site (DOT 1984, Guide 27)


SECTION  VI --  USE INFORMATION

    Formic acid, isopropyl ester, is used as a fumigant and as  a synthetic raw
    material (Clayton and Clayton 1981-82, p. 2265).


SECTION  VII  -- PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    Keep unnecessary people away; isolate hazard area and deny entry. Stay
    upwind;  keep out of  low areas.  Wear self-contained (positive pressure if
    available) breathing  apparatus and full protective clothing.  Isolate for
    1/2 mile in all  directions if tank car or truck is involved in fire.   Shut
    off ignition sources; no flares, smoking or flames in hazard area.  Stop
    leak if you can  do so without risk.  Use water spray to reduce vapors.
    Small spills:   absorb with sand or other noncombustible absorbent material
    and place into containers  for later disposal.  Large spills:  dike  far
    ahead of spill for later disposal (DOT 1984, Guide 27).

-------
                                     CAS Registry Number:  627-11-2
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31. 1985
                                                  Revision:
CHEMICAL IDENTITY -- CHLOROETHYL CHLOROFORMATE

CAS Registry Number:  627-11-2

Synonyms:  (SANSS 1983  Synonyms)  Formic acid,  Chloro-, 2-Chloroethyl
Ester;  Carbonochloridic Acid,  2-Chloroethyl Ester;  .beta.-Chloroethyl
Chloroformate;  (2-Chloroethoxy)carbonyl Chloride; Chloroformic Acid,
2-Chloroethyl Ester; TL 207; 2-Chloroethyl Chlorocarbonate; 2-Chloroethyl
Chloroformate

Chemical Formula:   C  H  Cl 0

Molecular Weight:  142.97


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC.    inhalation
    (mouse) 0.2 mg/liter/10 minutes ('-NIOSH/RTECS 1985)


SECTION  II --  PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:   312.3°F,  155.7°C (Weast 1978, p. C-310)

    Specific Gravity (H20=l):   1.3847  (Weast  1978, p.  C-310)

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   Not  Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

-------
                                    CAS Registry Number:  627-11-2
                                    Page 2 of 4
                    CHLOROETHYL CHLOROFORMATE


SECTION II  -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility in  Water:  Insoluble (Weast 1978, p.  C-310)

    Appearance and Odor:  Not Found


SECTION III -- FIRE AND EXPLOSION  HAZARD DATA

    Flash" Point (Method Used):   Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing Methods:  Not Found

    Special  Fire Fighting  Procedures:   Not Found

    Unusual  Fire and Explosion Hazards:  Not  Found


SECTION IV -- REACTIVITY DATA

    Stability:  Unstable:   Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous  Decomposition or Byproducts:  Not  Found

    Hazardous  Polymerization:   May Occur:   Not Found
                              May Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION V -- HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:  Not  Found
                     Skin:  Not Found
                     Ingestion:   Not  Found

-------
                                      CAS Registry Number:   627-11-2
                                      Page 3 of 4
                    CHLOROETHYL CHLOROFORMATE


SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Health Hazards (Acute,  Delayed,  and Chronic):  (Non-Specific -- Ethyl
    Chloroformate)  Poisonous; may be fatal if inhaled, swallowed or absorbed
    through skin.  Contact may cause burns to skin and eyes  (DOT 1984, Guide
    28).

    Signs and Symptoms of  Exposure:  Not Found

    Medical Conditions Generally Aggravated  by Exposure:   Not Found

    Emergency and First Aid  Procedures:   (Non-Specific  --  Ethyl
    Chloroformate)  Move victim to fresh air; call emergency medical care.   If
    not breathing, give  artificial respiration.   If breathing is difficult,
    give oxygen.  Remove and isolate contaminated clothing and shoes at the
    site.   In  case of contact with material,  immediately  flush skin or eyes
    with running water for at least 15 minutes.   Keep  victim quiet and
    maintain normal body temperature.  Effects may be  delayed; keep victim
    under observation (DOT 1984, Guide 28).


SECTION  VI -- USE INFORMATION

    Not Found
SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or  Spilled)

    (Non-Specific -- Ethyl Chloroformate)   Keep unnecessary people away;
    isolate hazard  area and deny entry.   Stay upwind;  keep out of low areas.
    Wear positive pressure breathing apparatus and  special protective
    clothing.   Isolate for 1/2 mile in all directions  if tank car or truck is
    involved in fire.  Shut off ignition sources; no  flares, smoking or flames
    in hazard area.  Do not touch spilled material; stop leak if you can do so
    without risk.   Use water spray to reduce vapors.   Small spills:  absorb
    with sand or other noncombustible absorbent material and place into
    containers  for  later disposal.  Large spills:   dike far ahead of spill for
    later  disposal  (DOT 1984, Guide 28).

-------
                                    CAS Registry Number:  627-11-2
                                    Page 4 of 4
                    CHLOROETHYL CHLOROFORMATE
COMMENTS
    Sources searched but no information found:
       Hawley 1981
       Hayes 1982
       Merck 1983
       Clayton and Clayton 1981-82
       CHRIS 1978
       Weiss 1980
       NFPA 1978
       DASE 1980
       Encyc Occupat Health and Safety 1983
       Hayes 1982
       Buchel 1983

-------
                                           CAS Registry Number:  630-60-4
                                           Page  1 of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October  31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- OUABAIN

CAS Registry Number:   630-60-4

Synonyms:  3-((6-Deoxy-alpha-L-Mannopyranosyl)Oxy)-l,5,llalpha,14,19-
Pentahydroxycard-20(22)-Enolide;  Acocantherin; Astrobain;  Card-20(22)-Enolide,
3-((6-Deoxy-alpha-L-Mannopyranosyl)Oxy)-l,5,11,14,19-Pentahydroxy-,
(lbeta,3beta,5beta,llalpha)-; G-Strophanthin; G-Strophicor;  Gratibain; Gratus
Strophanthin;  Kombetin; Ouabagenin L-Rhamnoside; Ouabaine;  Purostrophan;
Rectobaina;  Solufantina; Strodival;  Strophalen; Strophanthin G;  Strophanthin
Thorns;  Strophoperm; Strophosan

Chemical Formula:  CnnH..010
                    29  44  12

Molecular  Weight:  584.64


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits  Recommended:   Toxicity information:   ID,   oral (dog)

    1.5 mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H  0=1):  Not Found

    Vapor Pressure (mmHg):  Not  Found

    Melting Point:  392°F,  200°C  (*Weast 1979)

    Vapor Density (AIR=1):   Not  Found

    Evaporation  Rate  (Butyl  acetate=l):  Not  Found

-------
                                            CAS  Registry Number:  630-60-4
                                            Page 2 of 4
                               OUABAIN
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility  in Water:  1 g/ 75 mL (Merck 1983, p. 990).

    Appearance and Odor:  Odorless,  white crystals or crystalline powder  as
    an octahydrate  (*0sol 1980).


SECTION  III  --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing Methods:   (Non-Specific -- Medicine, n.o.s.)  For small
    fires,  use dry  chemical, carbon dioxide, water spray, or foam.  For large
    fires,  use water spray,  fog, or foam (DOT  1984, Guide 11).

    Special Fire  Fighting  Procedures:   (Non-Specific -- Medicine, n.o.s.)
    Cool containers that are exposed to flames  with water from the side until
    well after fire is out.   For massive fires  use unmanned hose holder or
    monitor nozzles; if this is impossible, withdraw and let fire burn. Wear
    self-contained  (positive pressure if available) breathing apparatus and
    full protective clothing (DOT 1984, Guide  11).

    Unusual Fire and Explosion Hazards:  When heated  to decomposition, it
    emits  acrid smoke and fumes (Sax 1984, p.  2097).


SECTION  IV  -- REACTIVITY DATA

    Stability:  Unstable:
                Stable:  Stable in air, but affected by light (ouabain
                         octahydrate)  (*0sol  1980)

        Conditions  to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):   Not  Found

    Hazardous Decomposition or Byproducts:   Hydrolysis yields one mole
    ouabagenin and  one mole rhamnose (Merck 1983, p. 990).  When heated to
    decomposition,  it emits acrid smoke and fumes  (Sax  1984, p. 2097).

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found

-------
                                            CAS Registry Number:  630-60-4
                                            Page 3 of 4
                               OUABAIN
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Not Found
                       Skin:   Not  Found
                       Ingestion:  Yes (-Rumack 1975 to Present)

    Health Hazards  (Acute, Delayed,  and Chronic):   It  is  classified as
    extremely toxic.   Probable oral lethal dose in humans is less than 5  mg/kg
    or a taste (less than  7 drops) for 70 kg (150-lb.)  person (*Gosselin
    1976).  Exposure may result  in respiratory and cardiac failure,  and/or
    hyperalkemia (VrRumack  1975 to Present).

    Signs and Symptoms of Exposure:   Symptoms of  heart  failure occur, with
    marked increase  in serum potassium.  Signs may include confusion,
    vomiting,  coma,  convulsions, and respiratory failure (*Rumack 1975 to
    Present;  Oilman  1985,  p. 738).

    Medical  Conditions  Generally Aggravated by Exposure:  Patients with
    frequent premature ventricular heart beats or who have received any
    preparation  of digitalis during preceding three weeks are prone to
    toxicity (*Gilman 1980).

    Emergency and  First Aid  Procedures:  (Non-Specific -- Medicine,
    n.o.s.)   Move victim to fresh air, call emergency medical care.   If not
    breathing, give  artificial respiration.  If breathing is difficult, give
    oxygen.   In  case of contact with material, immediately flush skin  or  eyes
    with running water for at  least 15 minutes.  Remove and isolate
    contaminated clothing  and  shoes at the site.  Keep victim quiet and
    maintain normal  body temperature (DOT 1984, Guide 11).


SECTION  VI  --  USE INFORMATION

    Indicated to produce rapid digitalization in acute congestive heart
    failure.   Also recommended in treatment of atrial or nodal paroxysmal
    tachycardia  and  atrial flutter (Physicians' Desk Reference 1980, p. 1069).

-------
                                            CAS Registry Number:  630-60-4
                                            Page 4 of 4
                                OUABAIN
SECTION  VII  --  PRECAUTIONS  FOR  SAFE HANDLING  AND USE
(Steps to  be Taken in  Case  Material is Released or Spilled)

        (Non-Specific  --  Medcfnes, n.o.s.)  Keep unnecessary people away;
        isolate hazard area and  deny  entry.  Stay upwind; keep out of low
        areas.  Wear self-containing  (positive pressure if available)
        breathing apparatus and  full  protective clothing.  If water pollution
        occurs, notify appropriate authorities.  Shut off  ignition sources; no
        flares, smoking or  flames in  hazard area.  Keep combustibles (wood,
        paper, oil,  etc.) away from spilled material.  Do not touch spilled
        material.  Small  spills:  absorb with sand or other noncombustible
        absorbent material  and place  into containers for later disposal.
        Small dry spills:   with  clean shovel place material into clean, dry
        container and  cover;  move container from spill area.  Large spills:
        dike far ahead of spill  for later disposal (DOT 1984, Guide 11).

-------
                                      CAS Registry Number:   633-03-4
                                      Page 1 of 4
                        EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31. 1985
                                                    Revision:
CHEMICAL IDENTITY  --  C.I.  BASIC  GREEN 1

CAS Registry Number:  633-03-4

Synonyms:  (NIOSH/RTECS  1983 Synonyms,  Volume 1,  p.  345)   Ammonium,
(4-(p-(Diethylamino)-alpha-phenylbenzylidene)-2,5-Cyclohexadien-l-ylidene)-
Diethyl-,  Sulfate  (1:1);  Brilliant Green Crystals;  Aizen Diamond Green GH;
Aizen Malachite Green; Aniline Green;  Astra Diamond Green  GX; Avon Green
A-4379;  Basic  BRK  Green;  Basic Bright-Green Sulfate;  Basic Brilliant Green;
Basic Green 1;  Green V; Benzaldehyde Green; Brilliant Green; Brilliant Green
Aseptic; Brilliant Green  B; Brilliant Green B.P.;  Brilliant Green BP Crystals;
Brilliant  Green BDC; Brilliant Green Crystals; Brilliant Green Crystals H;
Brilliant  Green DSC; Brilliant Green G; Brilliant  Green GX; Brilliant Green
Lake; Brilliant Green  P;  Brilliant Green Special;  Brilliant Green Sulfate;
Brilliant  Green WP Crystals; Brilliant Green Y; Brilliant  Green YN; Brilliant
Green; Brilliant Lake  Green Y; Brilliant Tungstate Green Toner GT-288;
Calcozin Brilliant Green  G; C.I. 42040; C.I. Basic Green 1, Sulfate; Deorlene
Green JJO; Diamond Green  G; Ethyl Green; Fast Green J;  Fast Green JJO; 12415
Green; Green EN; Hidaco Brilliant Green; Malachite Green G; Mitsui Brilliant
Green GX;  Solid Green; Tertrophene Brilliant Green G; Aniline Brilliant Green

Chemical Formula:   C_7H  N »HO,S

Molecular  Weight:   482.69


SECTION  I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL: Not Found

    ACGIH TLV:  Not  Found

    IDLH:   Not Found

    Other Limits Recommended:  Toxicity information:  ID,   oral (mouse)
    25 mg/kg (*NIOSH/RTECS 1985)

-------
                                      CAS  Registry Number:  633-03-4
                                      Page 2 of 4
                        C.I. BASIC GREEN  1


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not  Found

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure  (mmHg):  Not Found

    Melting Point:   Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility  in Water:  Soluble (Merck 1983, p.  190)

    Appearance  and Odor:  Minute,  glistening, golden crystals (Merck 1983,
    p.  190)


SECTION  III  --  FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point  (Method Used):   Not  Found
    Flammable Limits:
        LEL:  Not Found
        UEL:  Not Found

    Extinguishing  Methods:  (Non-Specific  -- Poisonous Solid, n.o.s.)  For
    small  fires  use  dry chemical, carbon dioxide,  water spray, or foam.   For
    large  fires  use  water spray, fog, or foam (DOT 1984, Guide 53).

    Special Fire Fighting  Procedures:   (Non-Specific  -- Poisonous Solid,
    n.o.s.)  Keep  unnecessary people away;  isolate hazard area and deny
    entry.   Stay upwind; keep out of low areas.   Wear self-contained  (positive
    pressure  if  available) breathing apparatus  and full protective clothing
    (DOT 1984, Guide 53).

    Unusual Fire and Explosion  Hazards:  When heated to  decomposition,  it
    emits  very toxic fumes of nitrogen  oxides and sulfur oxides (Sax  1984,  p.
    355).


SECTION  IV  --  REACTIVITY  DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:   633-03-4
                                      Page 3 of 4
                        C.I.  BASIC GREEN 1


SECTION  IV --  REACTIVITY DATA (Continued)

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated  to decomposition,
    it emits very toxic fumes of nitrogen oxides  and  sulfur oxides  (Sax 1984,
    p. 355).

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found


SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Yes  (Sax 1984,  p.  355)

    Health Hazards  (Acute, Delayed, and Chronic):  It is classified as very
    toxic; probable lethal dose is 50-500 mg/kg in humans  (between  1 teaspoon
    and 1  ounce  for a 150-lb. person)  (Gosselin 1984, pp.  11-384).  It is a
    skin irritant  (Sax 1984, p. 355).

    Signs and Symptoms of Exposure:   Ingestion causes diarrhea and
    abdominal pain  (Gosselin 1984,  pp.  11-384-385).

    Medical  Conditions Generally Aggravated by Exposure:  Not  Found

    Emergency and  First Aid Procedures:  (Non-Specific -- Poisonous Solid,
    n.o.s.)   Move victim to  fresh air;  call emergency medical care.  Remove
    and isolate  contaminated clothing and shoes at the site.  In case of
    contact  with material, immediately flush skin or  eyes  with running water
    for at least 15 minutes  (DOT 1984,  Guide 53).


SECTION  VI --  USE INFORMATION
    Dyeing silk, wool,  leather, jute and cotton yellowish-green; manufacturing
    green ink;  as  staining constituent of bacteriological media; indicator
    (Merck 1983, p.  190), an intestinal anthelmintic;  a wound  antiseptic;
    treatment of mycotic infections; agricultural fungicide  (Gosselin 1984, p.
    11-385).  Not  registered as a pesticide in the U.S.  (USEPA/Pesticide Index
    1985).

-------
                                      CAS  Registry  Number:   633-03-4
                                      Page 4 of 4
                         C.I.  BASIC GREEN  1
SECTION  VII  --  PRECAUTIONS  FOR  SAFE HANDLING  AND USE
(Steps to be Taken in Case  Material is Released or Spilled)

    (Non-Specific --  Poisonous Solid, n.o.s.)  Keep unnecessary people away;
    isolate hazard area and deny entry.  Stay upwind; keep out of low areas.
    Wear self-contained (positive pressure if available) breathing apparatus
    and full protective clothing.  Do not touch spilled material; stop leak if
    you can do so without risk.   Small spills:  absorb with sand or other
    noncombustible absorbent material and place into containers for later
    disposal.   Small  dry spills:  with clean shovel place material into clean,
    dry container and cover;  move containers from spill area.  Large spills:
    dike .far ahead of spill for  later disposal (DOT 1984, Guide 53).


COMMENTS

    Sources searched  but no information found:
        NIOSH/OSHA 1978
        Weiss  1980
        Doull  1980
        Gilman 1985
        NFPA 1978
        Clayton and Clayton 1981-82
        Verschueren 1983
        Physicians' Desk Reference 1985
        Farm Chemicals  Handbook  1984
        Hayes  1982
        Weast  1979

-------
                                            CAS  Registry Number:  639-58-7
                                            Page 1 of 4
                        EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31.  1985
                                                    Revision:
CHEMICAL IDENTITY --  TRIPHENYLTIN CHLORIDE

CAS Registry Number  639-58-7

Synonyms:   (NIOSH/RTECS  1983 Synonyms, Volume 3, page 627):  Stannane,
Chlorotriphenyl-;  Brestanol; Chlorotriphenylstannane; Chlorotriphenyltin;
Tentin Chloride; GC 8993; General Chemicals 8993; HOE 2872; LS 4442;  TPTC;
Tinmate; Triphenylchlorostannane; Triphenylchlorotin

Chemical Formula:  C,0H,..ClSn
                     lo 1 j

Molecular Weight:   385.47


SECTION I  -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Air:  TWA 100 yg (Sn)/m3 (NIOSH/RTECS 1983, Volume 3,  p.
    627)

    ACGIH TLV:   (Organic  Compounds as Tin)  TWA 100 yg (Sn)/m3 (skin);
    STEL 200 yg (Sn)/m3  (skin) (ACGIH 1985, p.  31)

    IDLH:   Not  Found

    Other Limits Recommended: (Non-Specific -- Tin Compounds,  Organic)
    IDLH 200 mg/m3  (NIOSH/OSHA 1978, p.  180).   Occupational exposure to
    organotin compounds  recommended standard -- Air:  TWA 0.1 mg (Sn)/m3
    (NIOSH/RTECS 1983,  Volume 3, p.  627).  Toxicity information:  LD   oral

    (mouse)  18 mg/kg  (*NIOSH/RTECS 1985).


SECTION II  --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:  464°F, 240°C  at  13.5 mmHg (Sax 1984,  p.  782)

    Specific  Gravity  (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting  Point:  223°F, 106°C  (Sax 1984,  p.  782)

-------
                                            CAS Registry Number:  639-58-7
                                            Page 2 of 4
                       TRIPHENYLTIN CHLORIDE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Vapor Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):   Not Found

    Solubility in Water:   Insoluble (Sax 1984, p. 782) 40 ppm (Farm
    Chemicals Handbook  1984, p. C-234)

    Appearance and Odor:  White crystalline solid (Hawley 1977,  p.  1057)


SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing  Methods:  (Non-Specific -- Pesticide,  Solid, n.o.s.)
    Extinguish fires with dry chemical, carbon dioxide,  water spray,  fog, or
    foam.   Move container from fire area if you can do so without  risk.  Fight
    fire from maximum distance.  Dike fire control water for later disposal;
    do not scatter  the  material (DOT 1984, Guide 55).

    Special  Fire Fighting Procedures:  (Non-specific --  Pesticide, Solid,
    n.o.s.)   Keep unnecessary people away; isolate hazard area and deny
    entry.   Stay upwind;  keep out of low areas.  Ventilate closed  spaces
    before entering them.   Wear positive pressure breathing apparatus  and
    special  protective  clothing.  Remove and isolate contaminated  clothing at
    the site (DOT  1984, Guide 55).

    Unusual  Fire and Explosion Hazards:  When heated, it emits toxic fumes
    of chlorides (Sax 1984, p. 782).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                Stable:  Yes, when stored in dark with  dry air (Farm
                         Chemicals Handbook 1984, p. C234)

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):   Hydrolyzes to  hydroxide  in water
    (Farm  Chemicals Handbook 1984, p. C234)

-------
                                      CAS Registry Number:   639-58-7
                                      Page 3 of 4
                      TRIPHENYLTIN CHLORIDE
SECTION  IV --  REACTIVITY DATA (Continued)

    Hazardous Decomposition or Byproducts:   When  heated to decomposition,
    it emits toxic  fumes of chlorides (Sax 1984,  p.  782).

    Hazardous Polymerization:  May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:   Not Found
                      Skin:  Yes (Sax 1984, p.  2582)
                      Ingestion:   Yes (Sax  1984, p. 782)

    Health Hazards (Acute,  Delayed,  and Chronic):  Toxic and irritating  to
    the skin (Hawley  1977, p. 1057).   Dermal exposure may  lead to severe skin
    burns  as well  as  renal failure and possible  death (Clayton and Clayton
    1981-82, p.  1965).   (Non-Specific --  Tin Compounds, Organic)  Target
    organs affected are  central nervous system,  eyes, liver, urinary tract,
    skin and the blood (NIOSH/OSHA 1978,  p.  181).

    Signs and Symptoms of Exposure:  (Non-Specific -- Organic  Tin
    Compounds)  Eye irritation and acute  local skin  burns, irritation of the
    respiratory  tract on inhalation and irritation of the  gastrointestinal
    tract  following ingestion (Encyc Occupat Safety  and Health 1983,  p.
    2179).  (Non-Specific -- Tin Compounds,  Organic)  Other symptoms  include
    headache,  dizziness, sore throat, cough, abdominal  pain, vomiting, urine
    retention and  skin burns (NIOSH/OSHA  1978, p. 181).

    Medical  Conditions Generally Aggravated by  Exposure:  Not Found

    Emergency and First Aid Procedures:   In case of a dermal exposure,  wash
    with water or  scrub  with a strong detergent  soap and water (Clayton and
    Clayton 1981-82,  p.  1966).   In case of ingestion, induce vomiting and
    treat  symptomatically (Farm Chemicals  Handbook 1984, p. 234).
SECTION  VI  --  USE INFORMATION

    Used as  a rodent repellent, molluscicide,  fungicide and insecticide
    (Clayton  and Clayton 1981-82, p. 1952).

-------
                                      CAS Registry Number:  639-58-7
                                      Page 4 of 4
                       TRIPHENYLTIN CHLORIDE
SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    (Non-Specific --  Pesticide,  Solid, n.o.s.)  Keep unnecessary people  away;
    isolate hazard area  and deny entry.  Stay upwind; keep out of low  areas.
    Ventilate closed  spaces before entering them.  Wear positive pressure
    breathing apparatus  and special protective clothing.  Remove and isolate
    contaminated  clothing at  the site.  Do not touch spilled material; stop
    leak if you can do so without risk.  Use water spray to reduce vapors.
    Small spills:  absorb with sand or other noncombustible absorbent  material
    and place into containers for later disposal.  Small dry spills:   with
    clean shovel  place material  into clean, dry container and cover; move
    containers from spill area.  Large spills:  dike far ahead of spill  for
    later disposal (DOT  1984, Guide 55).
COMMENTS

    Sources  searched  but no  information found:
        Merck 1983
        NFPA 1984
        Student  1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Arena 1979
        Hayes 1982
        Physicians' Desk Reference 1985
        Oilman 1985
        Weast 1979

-------
                                      CAS Registry Number:  640-15-3
                                      Page 1  of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- THIOMETON

CAS Registry Number:   640-15-3

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume 3, p. 146)
Phosphorodithioic Acid, S-(2-(Ethylthio)Ethyl) 0,0-Dimethyl  Ester; BAY 23129;
0,0-Dimethyl-S-(2-Ethylmercaptoethyl)  Dithiophosphate; 0,0-Dimethyl
S-(2-(Ethylthio)Ethyl) Phosphorodithioate;  Ekatin; Ekatin Aerosol; Ekatine-25;
Ekatin ULV;  Ethanethiol, 2-(Ethylthio)-, S-Ester with 0,0-Dimethyl
Phosphorodithioate; 2-Ethylthioethyl 0,0-Dimethyl Phosphorodithioate;
S-(2-(Ethylthio)Ethyl) 0,0-Dimethylphosphorodithionate; S-(2-(Ethylthio)Ethyl)
Dimethyl Phosphorothiolothionate;  Intrathion; Intration;  Luxistelm; M 81;
Phosphorodithioic Acid, 0,0-Dimethyl S-(2-Ethylthio)Ethyl Ester; SAN 230;
Thiameton

Chemical Formula:   C,H1C00PS.
                    O J.J / O

Molecular Weight:  246.35


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information: LD  oral (rat) 25

    mg/kg (*NIOSH/RTECS 1985)


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   230°F,  110°C at 0.1 mmHg (Hayes  1982, p.  377)

    Specific Gravity (H20=l):  1.209 at 20°C (Hayes  1982,  p. 377)

    Vapor Pressure (mmHg):  3 x 10~4  at 20°C (Hayes 1982, p.  377)

    Melting  Point:   Not  Found

    Vapor Density (AIR=1): Not Found

-------
                                            CAS Registry Number:  640-15-3
                                            Page 2 of 4
                            THIOMETON
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Evaporation Rate (Butyl acetate=l):   Not Found

    Solubility  in Water:   200 mg/liter at 25°C (Hayes 1982, p.  377)

    Appearance and Odor:  Colorless oil with a characteristic odor (Hayes
    1982,  p. 377)


SECTION  III  -- FIRE AND  EXPLOSION HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Thiometon is an organic phosphorus pesticide
    (Hayes 1982,  p.  377).   (Non-Specific -- Organophosphorus Pesticide,
    Liquid, n.o.s.)  This material may burn, but does not ignite readily.  For
    small  fires,  us-e dry  chemical, carbon dioxide, water spray, or  foam.   For
    large  fires,  use water  spray, fog, or foam (DOT 1984, Guide 55).

    Special Fire Fighting Procedures: (Non-Specific -- Organophosphorus
    Pesticide,  Liquid, n.o.s.)  Stay upwind; keep out of low areas.   Move
    container  from  fire area if you can do it without risk.  Fight  fire  from
    maximum distance.  Dike fire control water for later disposal;  do not
    scatter the material.   Wear positive pressure breathing apparatus and
    special protective clothing (DOT  1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific  -- Organophosphorus
    Pesticide,  Liquid, n.o.s.)  Container may explode in heat of fire.   Fire
    and runoff  from  fire  control water may produce irritating or poisonous
    gases  (DOT  1984, Guide  55).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Yes,  in pure state and under alkaline conditions
                           (Hayes 1982, p. 377)
                 Stable:  Yes, in nonpolar solvents, e.g., xylene or
                         chlorobenzene (Hayes 1982, p. 377).

        Conditions to Avoid:  Alkali  (Hayes 1982, p. 377)

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous  Decomposition or Byproducts:  Not Found

-------
                                            CAS Registry Number:  640-15-3
                                            Page 3 of 4
                            THIOMETON
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:   Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Non-Specific -- Organophosphorus
                                  Pesticides, Liquid,  n.o.s.)  (DOT 1984,
                                  Guide 55)
                      Skin:   Yes  (Non-Specific -- Organophosphorus
                              Pesticides, Liquid,  n.o.s.) (DOT  1984,  Guide  55)
                      Ingestion:  Yes (Non-Specific -- Organophosphorus
                                  Pesticides, Liquid,  n.o.s.)  (DOT 1984,
                                  Guide 55)

    Health Hazards  (Acute, Delayed,  and  Chronic):   This  material is a
    cholinesterase  inhibitor and may affect central nervous system.   It may
    cause  changes in pressure  inside the eye (Hayes 1982, p.  378).
    Formulations may be  significantly more toxic than the pure  chemical  (Hayes
    1982,  p.  377).   (Non-Specific  -- Organophosphorus Pesticides, Liquid,
    n.o.s.)  May be fatal  if inhaled, swallowed, or absorbed through  the skin
    (DOT 1984,  Guide 55).

    Signs  and Symptoms of Exposure:  (Non-Specific --  Parathion)   Symptoms
    may include nausea,  vomiting,  abdominal cramps, diarrhea, excessive
    salivation, headache,  giddiness, weakness, muscle twitching,  difficult
    breathing,  blurring  or dimness of vision, and loss  of muscle
    coordination.   Death may occur from failure of the  respiratory  center,
    paralysis of the respiratory muscles, intense bronchoconstriction, or all
    three  (Gosselin 1984,  p. III-340).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Thiometon is an organic  phosphorus
    pesticide (Hayes 1982, p.  377).  (Non-Specific -- Organophosphorus
    Pesticides, Liquid,  n.o.s.)  Move victim to fresh air; call emergency
    medical care.   If not  breathing, give artificial respiration.   If
    breathing is difficult, give oxygen.   In case of contact with material,
    immediately flush skin or  eyes with running water for at least  15
    minutes.   Speed in removing material from skin is of extreme  importance.
    Remove and isolate contaminated clothing and shoes  at the site.   Keep
    victim quiet and maintain  normal body temperature.   Effects may be
    delayed;  keep victim under observation (DOT 1984, Guide 55).

-------
                                            CAS Registry Number:  640-15-3
                                            Page 4 of 4
                            THIOMETON
SECTION VI  --  USE INFORMATION

    This  material  is an insecticide and acaricide suitable for controlling
    sucking insects  (Hayes 1982, p.  377).
SECTION VII -- PRECAUTIONS FOR SAFE  HANDLING  AND  USE
(Steps  to be Taken in Case Material is  Released or Spilled)

    (Non-Specific -- Organophosphorus Pesticide, Liquid, n.o.s.)   Stay upwind;
    keep out of  low areas.  Ventilate closed  spaces before entering them.
    Wear positive pressure breathing apparatus and special protective
    clothing.  Remove and isolate contaminated clothing at the site.   Do not
    touch spilled material.  Use water  spray  to reduce vapors.  Take up small
    spills with  sand or other noncombustible  absorbent material and place  in
    containers for later disposal.   Dike  far  ahead of large spills for later
    disposal (DOT 1984, Guide 55).

-------
                                           CAS  Registry Number:  640-19-7
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- FLUOROACETAMIDE

CAS Registry  Number:  640-19-7

Synonyms:  2-Fluoroacetamide; 1081;  Acetamide, 2-Fluoro-;  AFL  1081;
Compound 1081; FAA; Fluorakil  100; Fluoroacetic Acid Amide; Fussol; Megatox;
Monofluoroacetamide; Navron; Rodex; Yanock

Chemical Formula:   C0H.FNO
                    2 4
Molecular  Weight:  7.7.06


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD   oral (rat)

    5.75 mg/kg (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Sublimes on heating  (Hayes  1982, p.  499)

    Specific Gravity (H  0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   225-228°F,  107-109°C (Hayes 1982, p. 499)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not Found

    Solubility  in Water:   Freely  soluble ('''Merck 1976)

    Appearance and Odor:  Colorless crystalline  powder  (^Worthing 1979)

-------
                                            CAS  Registry Number:  640-19-7
                                            Page 2 of 3
                         FLUOROACETAMIDE


SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing Methods:   Not Found

    Special  Fire Fighting  Procedures:   Not  Found

    Unusual Fire and Explosion Hazards:  Not Found


SECTION  IV --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Decomposing heat (Sax 1984, p. 1428)

    Incompatibility (Materials to Avoid):  Not  Found

    Hazardous Decomposition or Byproducts:   Emits very toxic fumes of
    fluorine containing compounds and  nitrogen oxides when heated to
    decomposition (Sax  1984, p. 1428).

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Not Found
                      Skin:  Yes (*Hayes  1982)
                       Ingestion:   Yes (*Gosselin 1976)

    Health Hazards (Acute,  Delayed, and Chronic):  This material  is  super
    toxic; probable oral lethal dose in humans is less than 5 mg/kg, or a
    taste  (less  than 7 drops) for a 150-lb. person  (*Gosselin 1976).
    Chemically inhibits oxygen  metabolism by cells  with critical damage
    occurring to the heart,  brain,  and lungs resulting in heart failure,
    respiratory  arrest, convulsions, and death (Gilman 1980, p. 1644).

-------
                                            CAS Registry Number:  640-19-7
                                            Page 3 of 3
                          FLUOROACETAMIDE
SECTION  V -- HEALTH HAZARD DATA (Continued)

    Signs and Symptoms of Exposure:   See fluoroacetate  (*Rumack 1975 to
    Present)   (Non-Specific  -- Fluoroacetate)  Abdominal pain,  vomiting,
    nausea,  diarrhea,  and  hyperactivity.   Symptoms related to damage to brain
    may occur gradually, after 2-20 hours, starting with uneasiness, auditory
    hallucinations,  tingling, numbness, and twitching of face;  convulsions.
    After convulsions  start, heart beat may become irregular leading to heart
    failure and  death  (Gosselin  1984, pp.  III-193-195; *Rumack 1975  to
    Present).

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Treatment of poisoning by
    fluoroacetamide  should be the same as  for fluoroacetate (Hayes 1982,  p.
    500).   The emergency procedures for sodium fluoroacetate are:  Move victim
    to fresh  air;  call  emergency medical care.  In case of contact with
    material,  immediately  flush skin or eyes with running water for  at least
    15 minutes.  Remove and  isolate contaminated clothing and shoes  at the
    site (DOT 1984,  Guide  53).


SECTION  VI  --  USE INFORMATION

    Rodenticide  (*SRI);  insecticide proposed mainly for use on fruits to
    combat scale insects,  aphids, and mites ("Merck 1976).  Use is largely
    restricted to  licensed pest control operators (""Doull 1980).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be  Taken in  Case Material is Released or Spilled)

    (Non-Specific  -- Sodium Fluoroacetate)  Do not touch spilled material;
    stop leak if you can do  so without risk.  Small spills:   absorb  with  sand
    or other  non-combustible absorbent material and place into containers for
    later disposal.  Large spills:  dike spill for later disposal.  Keep
    unnecessary  people  away; isolate hazard area and deny entry.   Stay upwind;
    keep out  of  low  areas.  Wear self-contained (positive pressure if
    available) breathing apparatus and full protective clothing (DOT 1984,
    Guide 53).

-------
                                      CAS Registry Number:   644-64-4
                                      Page 1 of 4
                        EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31, 1985
                                                    Revision:
CHEMICAL IDENTITY  -- DIMETILAN

CAS Registry Number:  644-64-4

Synonyms:  l-Dimethylcarbamoyl-5-Methyl-3-Pyrazolyl Dimethylcarbamate;
2-(N,N-Dimethylcarbamyl)-3-Methylpyrazolyl-5 N,N-Dimethylcarbamate;
2-Dimethylcarbamoyl-3-Methyl-5-Pyrazolyl Dimethylcarbamate; Carbamic Acid,
Dimethyl-, l-((Dimethylamino)Carbonyl)-5-Methyl-lH-Pyrazol-3-yl Ester;
Carbamic Acid,  Dimethyl-, Ester with 3-Hydroxy-N,N,5-Trimethylpyrazole-l-
Carboxamide;  Dimethyl  2-Carbamyl-3-Methylpyrazolyldimethylcarbamate;
Dimethylcarbamic Acid  l-[(Dimethylamino)Carbonyl]-5-Methyl-lH-Pyrazol-3-yl
Ester;  Dimethylcarbamic Acid Ester with 3-Hydroxy-N,N,5-Trimethylpyrazole-l-
Carboxamide;  Dimetilane; ENT 25,922; Fly Bands;  G 22870; G-22870; Geigy 22870;
Geigy GS-13332;  GS-13332; Pyrazole-1-Carboxamide,  3-Hydroxy-N,N,5-Trimethyl-,
Dimethyl Carbamate  (Ester); Snip; Snip Fly; Snip Fly Bands

Chemical Formula:  C.._H, ,N. 0,
                    10 lo  H o

Molecular Weight:   240.27


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:  Not  Found

    IDLH:  Not  Found

    Other Limits Recommended:  Toxicity information:  LD   oral (rat) 25
    mg/kg (*NIOSH/RTECS 1985)


SECTION II — PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  392-410°F,  200-210°C  at  13 mmHg  (*Merck 1976)

    Specific Gravity (H 0=1):   Not Found

    Vapor Pressure (mmHg):  1 x  10"4 at 20°C (^Worthing  1979)

    Melting Point:  154-160°F,  68-71°C (*Merck 1976); technical grade
    131-149°F,  55-65°C (MErck  1983, p. 476)

-------
                                            CAS Registry Number:   644-64-4
                                            Page 2 of 4
                            DIMETILAN
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Vapor  Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:  Soluble (*Merck 1976)

    Appearance and Odor:  Colorless solid.  The technical  product is a
    yellow to reddish-brown solid (Merck 1983,  p. 476)


SECTION  III -- FIRE AND  EXPLOSION HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing  Methods:  (Non-Specific  -- Carbamates)  Extinguish fire
    using  agent suitable for types of surrounding fire,  as the material itself
    burns  with difficulty.  Use water in flooding quantities as a fog.  Use
    alcohol foam,  carbon dioxide, or dry chemical (Student 1981, p. 104).

    Special  Fire Fighting  Procedures:  (Non-Specific --  Carbamate
    Pesticide,  Solid, n.o.s.)  Move container from fire  area.  Fight fire from
    maximum distance.  Dike fire control water  for later disposal; do not
    scatter the material.  Wear positive pressure breathing  apparatus and
    special protective clothing (DOT 1984,  Guide 55).

    Unusual Fire and Explosion Hazards:  When heated to decomposition,  it
    emits  toxic fumes of nitrogen oxides (Sax 1984,  p.  1145).  (Non-Specific
    -- Carbamate Pesticide, Solid, n.o.s.)   This material  may burn but does
    not ignite readily.  Container may explode  in heat of  fire (DOT 1984,
    Guide  55).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):   Hydrolyzed by  acids and alkalis
    (-Merck 1976).

-------
                                            CAS Registry Number:  644-64-4
                                            Page 3 of 4
                             DIMETILAN
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    hazardous fumes  of nitrogen oxides may be emitted (Sax 1984,  p.  1145).

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (*Rumack 1975 to Present)
                      Skin:   Yes  (-Rurnack 1975 to Present)
                      Ingestion:  Yes (*Rumack 1975 to Present)

    Health Hazards  (Acute, Delayed,  and Chronic):   Very toxic; probable
    oral lethal dose for humans  is 50-500 mg/kg or between 1 teaspoon and 1
    oz.  for a 70 kg  (150 Ib.)  person  (*Gosselin 1976).  Dimetilan is  highly
    toxic by inges'tion and moderately toxic by contact with the skin  (Sax
    1984,  p.  1145).   Death is  primarily due to respiratory arrest of  central
    origin, paralysis of the respiratory muscles, intense bronchoconstriction,
    or all three.  This compound is a cholinesterase inhibitor (*Gosselin
    1976).

    Signs and  Symptoms of Exposure:   Symptoms  are  similar to carbaryl
    poisoning:   nausea, vomiting, abdominal cramps, diarrhea,  pinpoint pupils,
    excessive salivation, and  sweating are common symptoms.  Running  nose and
    tightness in chest are common in  inhalation exposures.  Difficulty in
    breathing,  raspy breathing,  and loss of muscle coordination may also  be
    seen.   Exposure  may also result in random jerky movements, incontinence,
    convulsions, and coma and  death (*Gosselin 1976).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  (Non-Specific -- Carbamate
    Pesticide,  Solid, n.o.s.)  Move victim to fresh air; call emergency
    medical care.  If not breathing, give artificial respiration.  If
    breathing is difficult, give oxygen.  In case of contact with material,
    immediately flush skin or  eyes with running water for at least 15
    minutes.   Speed  in removing  material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes at the site.  Keep
    victim quiet and maintain  normal body temperature.  Effects may be
    delayed;  keep victim under observation (DOT 1984, Guide 55).

-------
                                            CAS Registry Number:  644-64-4
                                            Page 4 of 4
                            DIMETILAN
SECTION  VI --  USE  INFORMATION

    Formerly an  insecticide  for insect control on livestock,  especially
    housefly control.   It  is no longer produced commercially in the U.S.
    (-SRI; Farm  Chemicals  Handbook  1984, p. C80)


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken in Case Material is Released or Spilled)

    (Non-Specific --  Carbamate Pesticide, Solid, n.o.s.)  Keep unnecessary
    people away;  isolate hazard area and deny entry.  Stay upwind,  keep out of
    low areas.   Wear  positive pressure breathing apparatus and special
    protective clothing including boots, gloves, and goggles.   Do not touch
    spilled material,  or breathe the vapors, dusts,  or fumes  from burning
    materials.   Do not handle broken packages without protective equipment.
    Wash away any material that may have contacted the body with soap and
    water  (Student 1981, p.  104; DOT 1984, Guide 55).

-------
                                           CAS Registry Number:   646-06-0
                                           Page 1 of 4
                       EPA  CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October  31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- DIOXOLANE

CAS Registry Number:   646-06-0

Synonyms:  1,3-Dioxolane; 1,3-Dioxacyclopentane;  1,3-Dioxolan; 1,3-Dioxole,
Dihydro-;  Ethylene Glycol Formal;  Formal Glycol; Glycol Formal

Chemical Formula:   C0H,0.
                    j o 2.
Molecular  Weight:  74.09


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LC^   inhalation
    -(rat)  96.6 mg/liter/4 hours;  LC,-n  inhalation (mouse) 0.0001 mg/liter
    (*NIOSH/RTECS  1985)  (SUSPECT)                     *


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS.

    Boiling Point:   165°F,  74°C (-Hawley 1977)

    Specific Gravity (H20=l):   1.065 (-Hawley 1977)

    Vapor Pressure  (mmHg):  70 at 20°C  (--Hawley 1977)

    Melting Point:   -139°F, -95°C  (Weast 1979,  p.  C-277)            "

    Vapor Density (AIR=1):  Heavier than air (Student  1981,  p.  207)

    Evaporation  Rate (Butyl  acetate=l):   Not Found

    Solubility in Water:  Soluble (*Hawley 1977)

    Appearance and  Odor:  Water-white  liquid  (*Hawley 1977)

-------
                                      CAS Registry Number:  646-06-0
                                      Page 2 of 4
                             DIOXOLANE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):  35°F, 1.7°C (OC) (*Hawley 1977)
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Do not extinguish unless flow can be stopped.
    Use water in flooding quantities as fog.  Solid streams of water may be
    ineffective.   Use "alcohol" foam, carbon dioxide, or dry chemical (Student
    1981,  p.  207).   Small fires:  dry chemical, carbon dioxide, water spray or
    alcohol foam.  Large  fires:  Water spray, fog or alcohol foam.  Move
    container from fire area if you can do so without risk.  Spray cooling
    water  on containers that are exposed to flames until well after fire is
    out.  For massive fire  in  cargo area, use unmanned hose holder or monitor
    nozzles;  if this is impossible, withdraw from area and let fire burn.
    Withdraw immediately  in case of rising sound from venting safety device or
    any discoloration of  tank  due to fire (DOT  1984, Guide 26).

    Special Fire Fighting  Procedures:  Cool all containers with flooding
    quantities of water.  Apply water from as far a distance as possible
    (Student 1981, p. 207).  Keep unnecessary people away; isolate hazard area
    and deny entry.   Stay upwind; keep out of low areas.  Wear self-contained
    (positive pressure if available) breathing  apparatus and full protective
    clothing.   Isolate for  1/2 mile in all directions if tank car or truck is
    involved in fire (DOT 1984, Guide 26).

    Unusual Fire and Explosion Hazards:  When  heated,  it  emits  acrid smoke
    and fumes  (Sax 1984,  p. 1229).  Flammable/combustible material; may be
    ignited by heat,  sparks or flames.  Vapors  may travel to a source of
    ignition and flash back.   Container may explode in heat of fire.  Vapor
    explosion hazard indoors,  outdoors or in sewers.  Runoff to sewer may
    create fire or explosion hazard (DOT 1984,  Guide 26).


SECTION  IV -- REACTIVITY  DATA

    Stability:   Unstable:
                 Stable:  Yes, under neutral or slightly alkaline
                           conditions ("Hawley  1977)

        Conditions to Avoid:   Not Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it emits  acrid smoke  and fumes (Sax 1984, p. 1229).

-------
                                      CAS Registry Number:   646-06-0
                                      Page 3 of 4
                            DIOXOLANE
SECTION  IV  --  REACTIVITY DATA (Continued)

    Hazardous Polymerization:  May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:   Yes (*Hawley 1977)
                      Skin:  Yes (Sax 1984, p. 1229)
                      Ingestion:   Yes (-Hawley 1977)

    Health Hazards (Acute,  Delayed,  and Chronic):  Moderately toxic by
    inhalation and  ingestion (*Hawley 1977).  May be poisonous if inhaled or
    absorbed through skin.  Contact may irritate or burn  skin and eyes.  Fire
    may produce irritating or poisonous gases (DOT 1984,  Guide 26).

    Signs and  Symptoms of Exposure:  Vapors may cause dizziness  or
    suffocation (DOT 1984, Guide 26).

    Medical  Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid Procedures:   Move victim  to fresh air; call
    emergency medical care.  If not breathing, give artificial respiration.
    If breathing is  difficult,  give oxygen.   In case of contact with material,
    immediately flush eyes with running water for at least  15 minutes.  Wash
    skin with soap  and water.  Remove and isolate contaminated clothing and
    shoes at the site (DOT 1984, Guide 26).


SECTION  VI -- USE INFORMATION

    Low boiling solvent;  used for extraction of oils, fats, waxes, dyes, and
    cellulose derivatives (*Hawley 1977).   Crosslinking agent for phenolic
    novolak resins  (*SRI).

-------
                                      CAS Registry Number:  646-06-0
                                      Page 4  of 4
                             DIOXOLANE
SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to be Taken in  Case Material is Released or Spilled)
             •
    If material is not on fire and not involved in fire, then keep sparks,
    flames,  and other  sources of ignition away.  Keep material out of water
    sources  and sewers.  Build dikes to contain flow as necessary.  Attempt  to
    stop leak if this  can be done without hazard.  Use water spray to disperse
    vapors,  and dilute standing pools of liquid.  Avoid breathing vapors.
    Keep upwind.   Wear boots, protective goggles, and gloves.  Do not handle
    broken packages without protective equipment.  Wash away any material
    which may have contacted the body with copious amounts of water or soap
    and water (Student 1981, p.  207).  Shut off ignition sources, no flares,
    smoking  or flames  in hazard  area.  Small spills:  absorb with sand or
    other noncombustible absorbent material and place into containers for
    later disposal.  Large spills:  dike far ahead of spill  for later disposal
    (DOT 1984,  Guide

-------
                                     CAS Registry Number:  675-14-9
                                     Page  1  of 3
                       EPA CHEMICAL  PROFILE
                                                  INTERIM
                                                  Date: October 31,  1985
                                                  Revision:
CHEMICAL  IDENTITY -- CYANURIC FLUORIDE

CAS Registry Number-.  675-14-9

Synonyms:   (NIOSH/RTECS  1983 Synonyms,  Volume 3,  p.  802)  s-Triazine,
2,4,6-Trifluoro-; 2,4,6-Trifluoro-s-Triazine; 1,3,5-Triazine, 2,4,6-Trifluoro-

Chemical  Formula:  C3F3N3

Molecular Weight:  135.06


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  LC   inhalation

    (rat) 0.017 mg/liter/4 hours (*NIOSH/RTECS 1985)


SECTION II  --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:  Not Found

    Specific  Gravity  (H 0=1): Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl  acetate=l):   Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:  Not Found

-------
                                      CAS Registry Number:  675-14-9
                                      Page 2 of 3
                        CYANURIC FLUORIDE
SECTION  III  --  FIRE AND EXPLOSION  HAZARD  DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not Found
        DEL:  Not Found

    Extinguishing Methods:  Not Found

    Special Fire  Fighting  Procedures:   Not Found

    Unusual Fire and Explosion  Hazards:   When heated to decomposition,  it
    emits  very toxic fumes of  fluorides and nitrogen oxides  (Sax  1984, p.
    2649).


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Decomposing  heat (Sax 1984, p.  2649)

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or  Byproducts:  When heated to  decomposition,
    it emits very toxic fumes  of fluoride and nitrogen oxides (Sax 1984, p.
    2649).

    Hazardous Polymerization:   May Occur:  Not  Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (Sax 1984, p. 2649)
                      Skin:  Yes (Sax  1984, p.  2649)
                      Ingestion:  Not  Found

    Health  Hazards (Acute,  Delayed,  and Chronic):   This  material is  highly
    toxic  by skin contact and  inhalation (Sax 1984, p.  2649).

    Signs  and Symptoms of  Exposure:   Not Found

    Medical Conditions Generally Aggravated by  Exposure:  Not Found

    Emergency and First Aid Procedures:  Not Found

-------
                                      CAS  Registry  Number:  675-14-9
                                      Page 3 of 3
                        CYANURIC FLUORIDE
SECTION  VI  --  USE INFORMATION

    Not Found
SECTION  VII -- PRECAUTIONS FOR SAFE  HANDLING  AND  USE
(Steps to  be Taken in Case Material is  Released or Spilled)

    Avoid  inhalation and skin contact.   Wear  respiratory protection and full
    protective  clothing (see Section V  above).
COMMENTS

    Sources  searched but no information found:
        Weast  1979
        Hawley 1981
        Arena  1979
        Merck  1983
        Encyc  Occupat Health and Safety 1983
        Gosselin  1984
        Weiss  1980
        CHRIS  1978
        Hayes  1982
        Student 1981
        DOT  1984
        Buchel 1983
        Farm Chemicals Handbook 1984
        U.S. Army 1975

-------
                                          CAS Registry Number:  676-97-1
                                          Page 1 of 4
                       EPA CHEMICAL  PROFILE
                                                  INTERIM
                                                  Date: October  31, 1985
                                                  Revision:
CHEMICAL  IDENTITY  -- METHYL PHOSPHONIC  DICHLORIDE

CAS Registry Number:  676-97-1

Synonyms:   (NIOSH/RTECS 1983 Synonyms,  Volume 3,  p.  119):  Phosphonic
Bichloride, Methyl-

Chemical  Formula:  CH Cl OP

Molecular Weight:   132.91


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

 .   ACGIH  TLV:  Not  Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  LC[-n inhalation
    (rat) 0.141 mg/liter/4 hours (-NIOSH/RTECS 1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity (H-0=l):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:  Not Found

-------
                                      CAS Registry Number:  676-97-1
                                      Page 2 of 4
                   METHYL PHOSPHONIC DICHLORIDE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Do not get water inside  container.  Small
    fires:   dry chemical or carbon dioxide.   Large fires:   flood fire area
    with water from  a distance.  Do not get solid stream of water on spilled
    material.   Move  container from fire area if you can do  so  without risk.
    Spray  cooling water on containers that are exposed to flames until well
    after  fire is out (DOT 1984, Guide 39).

    Special  Fire Fighting  Procedures:  Keep unnecessary people away;
    isolate hazard area and deny entry.  Stay upwind; keep  out of low areas.
    Ventilate  closed spaces before entering them.   Wear positive pressure
    breathing  apparatus and special protective clothing (DOT 1984, Guide 39).

    Unusual Fire and Explosion Hazards:  This material may burn but  does
    not ignite readily.  May ignite other combustible materials  (wood, paper,
    oil, etc.).  Reacts violently with water.  Flammable poisonous gases may
    accumulate in tanks and hopper cars.   Runoff to sewer may  create fire or
    explosion  hazard.  Contact causes severe burns to skin  and eyes.  Runoff
    from fire  control or dilution water may cause pollution (DOT 1984, Guide
    39).
SECTION  IV  --  REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Violent reaction with water (DOT
    1984,  Guide  39)

    Hazardous Decomposition or Byproducts:   Not Found

    Hazardous Polymerization:   May Occur:  Not  Found
                               May  Not  Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  676-97-1
                                      Page 3 of 4
                  METHYL PHOSPHONIC  DICHLORIDE


SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes (DOT 1984, Guide 39)
                      Skin:  Yes (DOT 1984, Guide  39)
                      Ingestion:   Yes (DOT 1984, Guide 39)

    Health Hazards (Acute,  Delayed, and Chronic):  Poisonous  if inhaled or
    swallowed.  Contact causes severe  burns to  skin and eyes (DOT 1984,  Guide
    39).

    Signs and Symptoms of  Exposure:   Not Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency  and First Aid  Procedures:   Move victim to  fresh air; call
    emergency medical care.   If not breathing,  give artificial respiration.
    If breathing  is difficult, give oxygen. Remove and isolate contaminated
    clothing  and  shoes at the site.  Speed in removing material from skin  is
    of extreme  importance.  In case of contact  with material, immediately
    flush skin  or eyes with running water  for at least 15  minutes.  Keep
    victim quiet  and maintain normal body  temperature (DOT 1984, Guide 39).


SECTION  VI  -- USE INFORMATION

    Not Found.
SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken in Case Material is Released  or  Spilled)

    Do not breathe vapors.  Wear respiratory protection, eye protection and
    full protective clothing (see Section V above).   Do not get water inside
    container;  stop leak if you can do so without risk.  Do not touch spilled
    material.   Use water spray to reduce vapors  but do not put water on leak
    or spill area.  Keep combustibles (wood, paper, oil, etc.) away from
    spilled material.  Dike spill for later disposal; do not apply water
    unless directed to do so.  Clean up only under  supervision of an expert
    (DOT 1984,  Guide 39).

-------
                                      CAS  Registry Number:  676-97-1
                                      Page 4 of 4
                  METHYL PHOSPHONIC DICHLORIDE
COMMENTS:

    Sources  searched but no information  found:
        ACGIH  1983
        NIOSH/OSHA 1978
        Hawley  1981
        Weast  1979
        Merck  1983
        NFPA 1984
        Student 1981
        Weiss  1980
        CHRIS  1978
        Doull  1980
        Clayton and Clayton 1981-82
        Arena  1979
        Gosselin 1984
        Encyc Occupat Health and Safety  1983
        Buchel  1983
        Farm Chemicals Handbook 1984
        Hayes  1982
        Gilman  1985

-------
                                      CAS Registry Number:  696-28-6
                                      Page 1  of 3
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October  31,  1985
                                                   Revision:
CHEMICAL IDENTITY - PHENYL  DICHLOROARSINE

CAS Registry Number:   696-28-6

Synonyms:  Arsine,  Dichlorophenyl-; Arsine,  Dichloro(phenyl)-; Arsonous
Bichloride,  Phenyl-; Dichlorophenylarsine; Phenylarsinedichloride; TL 69

Chemical Formula:   C-HrAsCl.
                    o  ;>    2.

Molecular  Weight:  223


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LC,    inhalation
                                      J                 low
    (mouse)  0.370 mg/liter (-NIOSH/RTECS 1985)


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  489.2-294.6°F,  254.4-257.6°C  (*Weast 1979)

    Specific  Gravity  (H  0=1):  1.6516 at 19°C  (*Weast 1979)

    Vapor Pressure  (mmHg):  0.033 at 25°C (U.S.  Army 1975,  p.  3-13)

    Melting Point:   -4°F,  -20°C  (*Hawley 1977)

    Vapor Density (AIR=1):   7.7 (U.S. Army 1975, p.  3-13)

    Evaporation Rate (Butyl acetate=l):   390  mg/m3 at 25°C (U.S.  Army
    1975,  p.  3-13))

    Solubility in Water:   Insoluble (*Weast 1979)

    Appearance and  Odor:  Liquid -- microcrystalline  (*Hawley 1977)
    odorless  (U.S. Army 1975,  p. 3-14)

-------
                                      CAS Registry Number:   696-28-6
                                      Page 2 of 3
                       PHENYL DICHLOROARSINE
SECTION  II! -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   High enough not  to  interfere with normal
    use (U.S.  Army  1975, p. 3-13)
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  Extinguish with dry chemical, carbon dioxide,
    water  spray,  foam, or  fog (DOT 1984, Guide 55).

    Special  Fire Fighting Procedures:  Wear positive pressure breathing
    apparatus.   Move container from fire area if you can  do  it without risk.
    Fight  fire from maximum distance.  Dike fire control  water for later
    disposal;  do not scatter the material (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:  This material may burn but  does
    not ignite readily.  Containers may explode  in  heat of fire.  Fire and
    runoff from fire control water may produce irritating or poisonous gases
    (DOT 1984,  Guide 55).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:   Yes  (Decomposed by water) (Hawley 1981,  p. 800)
                 Stable:

        Conditions to Avoid:   Not Found

    Incompatibility (Materials  to Avoid):  Decomposed by water
    (Hawley 1981, p. 800)

    Hazardous Decomposition or Byproducts:   Upon decomposition hydrogen
    chloride and phenylarsenious oxide are emitted (U.S.  Army  1975, p. 3-13)

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:   Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Hawley 1981,  p.  800)
                      Skin:  Yes  (Hawley 1981, p. 800)
                      Ingestion:   Yes (Hawley 1981,  p.  800)

-------
                                      CAS Registry Number:  696-28-6
                                      Page 3 of 3
                       PHENYL DICHLOROARSINE
SECTION  V -- HEALTH HAZARD DATA (Continued)

    Health Hazards  (Acute, Delayed, and Chronic):  Median  lethal dosage
    2600 mg-minute/m3.   Mean  incapacitating dosage 16 mg-tninute/m3  as a
    vomiting agent and  1800 mg-minute/m3 as a blistering agent.
    633 mg-minute/m3 produces  eye  injury (U.S. Army 1975, p.  3-14).
    Poisonous; may be fatal if inhaled, swallowed, or absorbed through skin.
    Contact may cause burns to skin and eyes  (DOT 1984, Guide 55).   Strong
    irritant to eyes, skin, and issue  ("Hawley 1977).

    Signs and  Symptoms of Exposure:   Vomiting  and blistering may occur
    (U.S.  Army 1975, p.  3-14).

    Medical Conditions  Generally Aggravated by  Exposure:   Not  Found

    Emergency and  First Aid  Procedures:  Move victim to fresh  air;  call
    emergency medical care.   If not breathing, give artificial respiration.
    If breathing is difficult,  give oxygen.   In case of contact  with material,
    immediately flush skin or  eyes with running water for at least  15
    minutes.  Speed in  removing material from skin is of extreme importance.
    Remove and isolate  contaminated clothing  and shoes at the site.   Keep
    victim quiet and maintain  normal body temperature.  Effects  may be
    delayed; keep victim under observation (DOT 1984, Guide 55).


SECTION  VI -- USE INFORMATION

    It is  used in organic  synthesis, as a military tear gas,  and a  solvent
    (Hawley 1981, p. 800).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING  AND  USE
(Steps to  be Taken in Case Material is Released or Spilled)

    When handling, wear a  protective mask and protective clothing for vapor
    and small droplets;  impermeable protective clothing for protection against
    large  droplets,  splashes,  and  smears (U.S. Army 1975, p.  3-14).   Keep
    unnecessary people  away;  isolate hazard area and deny entry.   Stay upwind;
    keep out of low areas.  Ventilate  closed  spaces before entering them.
    Wear positive pressure breathing apparatus and special protective
    clothing.   Remove and  isolate  contaminated clothing at the site.   Do not
    touch  spilled material; stop leak  if you  can do it without risk.   Use
    water  spray to reduce  vapors.  Small spills:   take up with sand or other
    noncombustible absorbent material  and place into containers  for later
    disposal.   Large spills:   dike far ahead  of spill for later  disposal (DOT
    1984,  Guide 55).

-------
                                            CAS  Registry Number:  732-11-6
                                            Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31, 1985
                                                    Revision:
CHEMICAL IDENTITY -- PHOSMET

CAS Registry Number:   732-11-6

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume  3,  P.  145)
Phosphorodithioic Acid, 0,0-Dimethyl Ester,  S-Ester  with
N-(Mercaptomethyl)phthalimide; Imidan;  APPA; Decemthion; Decemthion P-6;
(0,0-Dimethyl-Phthalimidiomethyldithiophosphate); 0,0-Dimethyl
S-(N-Phthalimidomethyl) Dithiophosphate;  0,0-Dimethyl S-Phthalimidomethyl
Phosphorodithioate; ENT 25,705; Ftalophos;  N-(Mercaptomethyl)Phthalimide
S-(0,0-Dimethyl  Phosphorodithioate); Percolate;  Phosphorodithioic Acid,
S-((l,3-Dihydro-l,3-Dioxo-2H-Isoindol-2-yl)Methyl) 0,0-Dimethyl Ester;
Phosmet;  Phthalimide, N-(Mercaptomethyl)-,  S-Ester with 0,0-Dimethyl
Phosphorodithioate; Phthalimidomethyl 0,0-Dimethyl Phosphorodithioate;
Phthalophos;  PMP; Prolate; R 1504;  Smidan;  Stauffer  R 1504

Chemical Formula:   C11H10NO.PS0
                i    11 12  4   2

Molecular Weight:  317.32


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not  Found

    IDLH:  Not  Found

    Other Limits Recommended:  Maximum  air concentration in the USSR  is 0.3
    mg/m3 (Encyc Occupat Health and Safety  1983, p.  1643).  Toxicity
    information:  LC   inhalation (rat) 0.054  mg/liter/4 hours (*NIOSH/RTECS

    1985)


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Decomposes  below boiling point  (*Spencer  1982)

    Specific Gravity (H 0=1):   Not  Found

    Vapor Pressure  (mmHg):  1 x 10"3 at 122°F,  50°C (*Merck 1983)

    Melting Point:   161°F, 71.9°C (*Merck 1983)

-------
                                            CAS Registry Number:  732-11-6
                                            Page 2 of 4
                             PHOSMET
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Vapor Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):   Not Found

    Solubility in Water:   25 mg/liter at 25°C (^Worthing 1979)

    Appearance and Odor:  Off-white crystalline solid (-Merck 1983),
    offensive odor  (-Spencer 1982).


SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing  Methods:  (Non-Specific --  Organophosphorus  Pesticide,
    n.o.s.)   This material may burn but does not ignite readily.   For small
    fires,  use dry  chemical, carbon dioxide, water spray,  or foam.   For  large
    fires,  use water spray, fog, or foam  (DOT 1984,  Guide  55).

    Special  Fire Fighting Procedures:  (Non-Specific -- Organophosphorus
    Pesticide, n.o.s.).   Stay upwind; keep out of low areas.  Move container
    from fire area  if you can do it without risk.   Fight fire  from maximum
    distance.   Dike  fire  control water for later disposal; do  not  scatter
    material.   Wear  positive pressure breathing apparatus  and  special
    protective clothing  (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific --  Organophosphorus
    Pesticide, n.o.s.).   Container may explode in heat of  fire.  Fire and
    runoff from fire control water may produce irritating  or poisonous gases
    (DOT 1984, Guide 55).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                Stable:  Yes (-Clayton and Clayton  1981-82)

        Conditions to Avoid:  Storage above 113°F, 45°C, may lead  to
        decomposition (-Spencer 1982).

    Incompatibility  (Materials to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:  Not Found

-------
                                            CAS Registry Number:  732-11-6
                                            Page 3  of 4
                              PHOSMET
SECTION  IV -- REACTIVITY DATA  (Continued)

    Hazardous  Polymerization:  May Occur:  Not Found
                               May Not Occur:   Not  Found

        Conditions to Avoid:   Not Found
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (*NIOSH/RTECS 1985)
                       Skin:   Yes  (Encyc  Occupat Health and Safety 1983,
                              p. 1643)
                       Ingestion:  Yes  (*NIOSH/RTECS 1985)

    Health Hazards  (Acute, Delayed,  and Chronic):   It  is  an
    organophosphorus pesticide (Buchel  1983, p. 69).  This material is very
    toxic; the probable oral  lethal dose  for humans is 50-500 mg/kg,  or
    between 1 teaspoon and 1  oz. for a  150  Ib. person.   It is a cholinesterase
    inhibitor and has central nervous system effects (Gosselin 1984,  p.
    11-298).   Oral lethal  doses  in humans have been reported at 50 mg/kg
    ("NIOSH/RTECS 1985).

    Signs and  Symptoms of Exposure:   This material is similar to
    parathion.   Symptoms may  include nausea, vomiting,  abdominal cramps,
    diarrhea, excessive salivation, headache, giddiness, weakness, muscle
    twitching,  difficult breathing, blurring or dimness of vision, and loss of
    muscle coordination.   Death  may occur from failure of the respiratory
    center, paralysis of the  respiratory muscles, intense bronchoconstriction,
    or all three (Gosselin 1984, p. 11-298  and p. III-340).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:   This is an organophosphorus
    pesticide (Buchel 1983, p. 69).  As for other organophosphorus pesticides
    treatment includes moving victim to fresh air; call emergency medical
    care.   If not breathing,  give artificial respiration.   If breathing is
    difficult,  give oxygen.   In  case of contact with material, immediately
    flush skin or eyes with running water for at least 15 minutes.  Speed in
    removing material from skin  is of extreme importance.   Remove and isolate
    contaminated clothing  and shoes at  the  site.  Keep victim quiet and
    maintain normal body temperature.   Effects may be delayed; keep victim
    under observation (DOT 1984, Guide  55).

-------
                                            CAS Registry Number:  732-11-6
                                            Page 4 of 4
                             PHOSMET
SECTION  VI  --  USE  INFORMATION

    This material  is  an  insecticide and acaricide (^Worthing 1979).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be  Taken in Case Material is Released or Spilled)

    This is an organophosphorus pesticide (Buchel 1983,  p.  69).   As  for other
    organophosphorus  pesticides stay upwind; keep out of low areas.   Ventilate
    closed spaces  before entering them.  Wear positive pressure  breathing
    apparatus  and  special protective clothing.  Remove and isolate
    contaminated clothing at the site.  Do not touch spilled material.  Use
    water spray  to reduce vapors.  Take up small spills  with sand or other
    noncombustible absorbent material and place in containers for later
    disposal.  Take up small, dry spills with clean shovel and place in clean,
    dry container.  Dike far ahead of large spills for later disposal (DOT
    1984,  Guide  55).

-------
                                    CAS Registry Number:  760-93-0
                                    Page 1 of 4
                      EPA CHEMICAL PROFILE
                                                  INTERIM
                                                 Date: October 31, 1985
                                                 Revision:
CHEMICAL  IDENTITY  -- METHACRYLIC  ANHYDRIDE

CAS Registry Number:  760-93-0

Synonyms: o (SANSS 1983 Synonyms)   2-Propenoic Acid, 2-Methyl-,
Anhydride; Methacrylic Acid Anhydride; Methacryloyl Anhydride

Chemical  Formula:  C0H,n00
                   o 1U J
Molecular Weight:   154.17


SECTION I  --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC_   inhalation
    (mouse) 0.45 mg/liter/2 hours  (*NIOSH/RTECS 1985)


SECTION II  --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  192°F, 89°C at 5 mmHg (Weast 1979, p. C-465)

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure (mmHg):   Not Found

    Melting Point:  Not Found

    Vapor Density  (AIR=1):   Not Found

    Evaporation Rate (Butyl acetate=l):   Not Found

    Solubility in Water:  Decomposes  (Weast 1979,  p. C-465)

    Appearance and Odor:  Not Found

-------
                                      CAS Registry Number:   760-93-0
                                      Page 2 of 4
                      METHACRYLIC ANHYDRIDE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  (Non-Specific --  Methacrylic Acid)  This
    material may react violently with water.   Small  fires:  dry chemical,
    carbon dioxide, water spray, or foam.  Large fires:  water spray, fog, or
    foam.   Move container from fire area if you can  do  so without risk.  Spray
    cooling water on containers that are exposed to  flames until well after
    fire is out (DOT 1984, Guide 60).

    Special  Fire Fighting Procedures:  (Non-Specific -- Methacrylic Acid)
    Keep unnecessary people  away; isolate hazard area and deny entry.  Stay
    upwind; keep out of  low  areas.  Wear self-contained  (positive pressure if
    available)  breathing apparatus and full protective  clothing (DOT 1984,
    Guide 60).

    Unusual Fire and Explosion Hazards:   (Non-Specific --  Methacrylic
    Acid)   This material may burn but may not  ignite readily.  Flammable/
    poisonous gases may accumulate in tanks and hopper  cars..  Some of these
    materials may ignite combustibles (wood, paper,  oil, etc.) (DOT 1984,
    Guide  60).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not  Found

    Hazardous  Decomposition or Byproducts:   Not  Found

    Hazardous  Polymerization:  May Occur:  Not Found
                               May Not  Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V --  HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Not Found

-------
                                     CAS Registry Number:   760-93-0
                                     Page 3 of 4
                      METHACRYLIC ANHYDRIDE


SECTION  V --  HEALTH HAZARD DATA (Continued)

    Health Hazards (Acute, Delayed, and Chronic):  Not Found

    Signs and Symptoms of Exposure:   Not  Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency  and First Aid Procedures:   (Non-Specific  -- Methacrylic
    Acid)   Move victim to fresh air; call emergency medical care.  Remove and
    isolate contaminated clothing  and  shoes at the site.   In case of contact
    with material, immediately  flush skin or eyes with running water for at
    least 15 minutes.  Keep victim quiet and maintain normal body temperature
    (DOT 1984, Guide 60).


SECTION  VI -- USE INFORMATION

    Not  Found
SECTION VII -- PRECAUTIONS  FOR SAFE HANDLING AND USE
(Steps  to be Taken in Case Material is Released or Spilled)

    (Non-Specific -- Methacrylic Acid)  Do not touch spilled material; stop
    leak if you can do so without risk.  For small spills, absorb with sand or
    other noncombustible absorbent material and place into containers for
    later disposal.  For large spills, dike far ahead of  spill  for later
    disposal (DOT 1984, Guide 60).

-------
                                      CAS Registry Number:   760-93-0
                                      Page 4 of 4
                      METHACRYLIC ANHYDRIDE
COMMENTS
    Sources  searched but no information found:
        NIOSH/RTECS 1983
        ACGIH 1983
        NIOSH/OSHA 1978
        Hawley 1981
        Merck 1983
        Sax  1984
        NFPA 1984
        Student 1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton and Clayton 1981-82
        Arena 1979
        Gosselin 1984
        Encyc Occupat Health and Safety 1983
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes 1982
        Physicians' Desk Reference 1985
        Gilman 1985

-------
                                            CAS  Registry Number:  786-19-6
                                            Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31,  1985
                                                    Revision:
CHEMICAL IDENTITY -- CARBOPHENOTHION

CAS Registry Number:   786-19-6

Synonyms:  Phosphorodithioic Acid, S-(((p-Chlorophenyl)Thio)Methyl)
0,0-DiethyJL  Ester; Acarithion; Akarithion;  Carbofenothion; Carbofenthion;
Dagadip;  Endyl;  ENT 23,708; Ethyl Carbophenothion; Garrathion; Hexathion;
Lethox;  Nephocarp; 0,0-Diethyl S-p-Chlorophenylthiomethyl Dithiophosphate;
Phosphorodithioic Acid, S-(((4-Chlorophenyl)Thio)Methyl) 0,0-Diethyl Ester;
Phosphorodithioic Acid, S-(((p-Chlorophenyl)Thio)Methyl) 0,0-Diethyl Ester;
R-1303;  S-(((p-Chlorophenyl)Thio)Methyl)  0,0-Diethyl Phosphorodithioate;
S-(4-Chlorophenylthiomethyl) Diethyl Phosphorothiolothionate; Stauffer
R-1,303;  Trithion; Trithion Miticide

Chemical Formula:   C,,H,-C10.PS,
                    11 ID   /  J

Molecular Weight:  342.85


SECTION I  -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not  Found

    IDLH:   Not  Found

    Other Limits Recommended:  Toxicity  information:  LD5  oral (rat) 6.8

    mg/kg (*NIOSH/RTECS 1985)


SECTION II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling  Point:   180°F,  82°C  at  0.01 mmHg (*Merck 1976)

    Specific Gravity (H20=l):   1.271 at 77°F, 25°C (*Merck 1976)
    Vapor Pressure  (mmHg):  3 x 10   at 68 F,  20  C  (*Martin and Worthing
    1974)

    Melting  Point:  Not Found

    Vapor Density (AIR=1):  Not Found

-------
                                            CAS  Registry  Number:  786-19-6
                                            Page 2 of 4
                         CARBOPHENOTHION


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Evaporation Rate (Butyl  acetate=l):  Not Found

    Solubility  in Water:  Practically insoluble  (-Merck 1976); less than 4
    mg/liter at 20°C  (Hayes 1982, p. 394)

    Appearance and Odor:  Off-white to amber  liquid, mild sulfur (rotten
    eggs)  like odor  (*Martin and Worthing 1974).


SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing  Methods:   (Non-Specific  -- Organophosphorus Pesticide,
    Liquid,  n.o.s.)  This material may burn, but  does not ignite readily.   For
    small  fires, use dry chemical, carbon dioxide, water spray, or foam.   For
    large  fires, use water spray, fog,  or foam  (DOT  1984, Guide 55).

    Special  Fire Fighting  Procedures:   (Non-Specific -- Organophosphorus
    Pesticide,  Liquid, n.o.s)  Stay upwind;  keep  out of low areas.  Move
    container  from  fire area if you can do it without risk.  Fight fire from
    maximum  distance.  Dike fire control water  for later disposal; do not
    scatter  the material.  Wear positive pressure breathing apparatus and
    special  protective clothing (DOT 1984,  Guide  55).

    Unusual Fire and Explosion Hazards:  (Non-Specific  --  Organophosphorus
    Pesticide  Liquid, n.o.s.)  Container may explode in heat of fire.  Fire
    and runoff from fire control water may produce irritating or poisonous
    gases  (DOT 1984, Guide 55).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                Stable:  Yes (*Martin  1974)

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous  Decomposition or Byproducts:  Not Found

-------
                                            CAS Registry Number:  786-19-6
                                            Page 3 of 4
                          CARBOPHENOTHION
SECTION  IV -- REACTIVITY DATA  (Continued)

    Hazardous  Polymerization:   May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Non-Specific -- Organophosphorus
                                  Pesticide) (Hayes 1982,  p.  301)
                      Skin:   Yes  (Hayes 1982, p. 394)
                      Ingestion:   Yes (Hayes 1982,  p.  394)

    Health Hazards  (Acute, Delayed,  and  Chronic):   This material is highly
    toxic; the estimated fatal oral dose is 0.6 g for a 150 Ib.  (70 kg) person
    (*Arena 1974).   It is  an indirect cholinesterase inhibitor,  meaning its
    effects are on  the nervous system (Hayes 1982,  p. 394).

    Signs and  Symptoms of Exposure:  Symptoms may  include nausea,  vomiting,
    abdominal cramps, diarrhea, excessive salivation, headache,  giddiness,
    weakness, muscle twitching, difficult breathing, blurring  or dimness of
    vision, and loss of  muscle coordination.  Death may occur  from failure of
    the respiratory center, paralysis of the respiratory muscles, intense
    bronchoconstriction,  or all three ("Gosselin 1976).

    Medical Conditions Generally Aggravated by Exposure:   Not  Found

    Emergency and  First Aid  Procedures:  (Non-Specific -- Organophosphorus
    Pesticide,  Liquid, n.o.s.)  Move victim to fresh air;  call emergency
    medical care.   If not  breathing, give artificial respiration.  If
    breathing is difficult, giv°. oxygen.   In case of contact with material,
    immediately flush skin or  eyes with running water for  at least 15
    minutes.   Speed in removing material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes at  the  site.  Keep
    victim quiet and maintain  normal body temperature.  Effects  may be
    delayed;  keep victim under observation (DOT 1984, Guide 55).


SECTION  VI  -- USE INFORMATION

    This material is an  insecticide and acaricide,  primarily for citrus crops
    and deciduous fruits and nuts  (*SRI;  *Farm Chemicals Handbook 1979).

-------
                                           CAS Registry Number:  786-19-6
                                           Page 4  of 4
                         CARBOPHENOTHION
SECTION VII -- PRECAUTIONS FOR  SAFE HANDLING AND  USE
(Steps to be Taken in Case Material  is  Released or Spilled)

    (Non-Specific -- Organophosphorus Pesticide, Liquid, n.o.s.)   Stay  upwind;
    keep out of  low areas.  Ventilate closed spaces before entering them.
    Wear positive pressure breathing  apparatus and special protective
    clothing.  Do not touch spilled material; stop leak if you can do it
    without risk.  Use water spray to reduce vapors.  Small  spills:  take up
    with sand or other noncombustible absorbent material and place into
    containers for later disposal.  Large spills:  dike far  ahead of spill  for
    later disposal (DOT 1984, Guide 55).

-------
                                     CAS  Registry Number:  814-49-3
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  DIETHYL CHLOROPHOSPHATE

CAS Registry  Number:  814-49-3

Synonyms:  (NIOSH/RTECS 1983  Synonyms, Volume 3, p. 137)  Phosphoro-
chloridic  Acid, Diethyl Ester; Chlorophosphoric Acid, Diethyl  Ester;
Diethoxyphosphorous Oxychloride

Chemical Formula:   C,H CIO P

Molecular  Weight:  172.56


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity  information:  LD_n oral (rat) 11
    mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   140°F, 60°C at 2  mmHg  (Sax 1984,  p.  1007)

    Specific Gravity (H20=l):  1.1915 at 25°C/25°C (Sax 1984, p. 1007)

    Vapor Pressure (mmHg):  Not  Found

    Melting Point:   Not Found

    Vapor Density (AIR=1):  5.94 (Sax 1984, p. 1007)

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:  Not Found

    Appearance and Odor:   Clear liquid (Sax  1984, p. 1007)

-------
                                            CAS Registry Number:  814-49-3
                                            Page 2 of 4
                      DIETHYL CHLOROPHOSPHATE
SECTION  III -- FIRE AND  EXPLOSION HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  This material is combustible (Hawley  1981, p.
    345).   Methods  for combustible liquids are as follows.   Small  fires:  dry
    chemical,  carbon dioxide, water spray, or foam.  Large fires:   water
    spray, fog, or  foam  (DOT  1984, Guide 27).

    Special  Fire Fighting Procedures:  Use the following procedures for
    combustible liquids.  Move container from fire area if you can do  it
    without risk.   Cool containers that are exposed to flames with water  from
    the side until  well after fire is out.  For massive fire in cargo  area,
    use unmanned hose holder or monitor nozzles;  if this is impossible,
    withdraw from area and  let fire burn.  Withdraw immediately in case of
    rising sound from venting safety device or any discoloration of tank  due
    to fire.  Keep  unnecessary people away; isolate hazard area and deny
    entry.  Stay upwind; keep out of low areas.   Wear self-contained (positive
    pressure if available)  breathing apparatus and full protective clothing.
    Isolate for 1/2  mile in all directions if tank car or truck is involved in
    fire (DOT 1984,  Guide 27).

    Unusual Fire and Explosion Hazards:   Emits  very toxic fumes of chloride
    and phosphorus  oxides when heated to decomposition (Sax 1984,  p.  1007).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:   Not Found

        Conditions  to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):     Not Found

    Hazardous  Decomposition or Byproducts:   Emits very toxic fumes of
    chloride and phosphorus oxides when heated to decomposition (Sax 1984, p.
    1007).

    Hazardous  Polymerization:  May Occur:   Not  Found
                               May  Not  Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  814-49-3
                                            Page 3 of 4
                      DIETHYL CHLOROPHOSPHATE
SECTION V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (Hawley 1981, p.  345)
                       Skin:   Yes  (Hawley  1981, p. 345)
                       Ingestion:  Yes (Hawley 1981,  p.  345)

    Health Hazards  (Acute, Delayed,  and  Chronic):   This material is a
    cholinesterase inhibitor.  It has high oral and very high dermal
    toxicity.   It is a skin irritant  (Sax 1984, p. 1007).   It is  also  toxic by
    inhalation (Hawley 1981, p.  345).

    Signs and Symptoms of Exposure:  This material may be similar to
    parathion  (Sax 1984, p. 1007).  Parathion symptoms may include  nausea,
    vomiting,  abdominal cramps,  diarrhea, excessive salivation, headache,
    giddiness,  weakness, muscle  twitching, difficult breathing, blurring or
    dimness of vision,  and loss  of muscle coordination.   Death may  occur from
    failure of the respiratory center, paralysis of the  respiratory muscles,
    intense bronchoconstriction, or all three (Gosselin  1984,  p.  III-340).

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  (Non-Specific -- Parathion)  Move
    victim to  fresh air; call emergency medical care. If not breathing, give
    artificial respiration.  If  breathing is difficult,  give  oxygen.   In case
    of contact with material, immediately flush skin or  eyes  with running
    water for  at  least  15 minutes.  Speed in removing material from skin is of
    extreme importance.  Remove  and isolate contaminated clothing and  shoes at
    the site.   Keep victim quiet and maintain normal body temperature.
    Effects may be delayed; keep victim under observation (DOT 1984, Guide 53).


SECTION VI -- USE INFORMATION

    This material is used as an  intermediate in organic  synthesis (Hawley
    1981, p. 345).

-------
                                            CAS Registry Number:   814-49-3
                                            Page 4 of 4
                      DIETHYL CHLOROPHOSPHATE
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    Do not touch spilled material.  Do not breathe vapors  (see  Section V
    above).   This material is a combustible liquid (Hawley 1981, p. 345).  For
    a spill  or leak of a combustible liquid, shut off ignition  sources; no
    flares,  smoking or flames in hazard area.   Stop leak if you can do so
    without  risk.  Use water spray to reduce vapors.   Small spills:  absorb
    with sand or other noncombustible absorbent material and place into
    containers for later disposal.  Large spills:  dike  far ahead of spill for
    later disposal.   Keep unnecessary people away; isolate hazard area and
    deny entry.   Stay upwind; keep out of low areas.   Wear self-contained
    (positive pressure if available) breathing apparatus and full protective
    clothing (DOT 1984, Guide 27).
COMMENTS

    Sources  searched but no information found:
        Weast 1979
        Merck 1983
        Weiss 1980
        Student 1981
        NFPA 1984
        Hayes 1982
        Farm Chemicals Handbook 1984
        Buchel 1983

-------
                                     CAS  Registry Number:  814-68-6
                                     Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31, 1985
                                                  Revision:
CHEMICAL  IDENTITY --  ACRYLYL CHLORIDE

CAS Registry Number:  814-68-6

Synonyms:   (NIOSH/RTECS  1983 Synonyms, Volume 1, p. 276)  Acrylic Acid
Chloride; Acryloyl Chloride; Propenoyl Chloride; 2-Propenoyl Chloride

Chemical Formula:  C  H CIO

Molecular Weight:  90.51


SECTION I  --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity  information: ' LC,    inhalation
    (rat) 0.093 mg/liter/4 hours (--NIOSH/RTECS  1985)


SECTION II --  PHYSICAL/CHEMICAL  CHARACTERISTfCS

    Boiling Point:  167°F, 75°C (Hawley 1981, p. 17)

    Specific Gravity  (H20=l):  1.1136  at 20°C/4°C (Weast 1979, p. C-465)

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found                                    *

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:   Liquid (Hawley 1981, p. 17)

-------
                                     CAS Registry Number:   814-68-6
                                     Page 2 of 3
                         ACRYLYL CHLORIDE


SECTION  III  --  FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing  Methods:   Not Found

    Special Fire Fighting  Procedures:   Not Found

    Unusual Fire and Explosion Hazards:   Not Found


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not  Found

    Incompatibility (Materials to Avoid):  Decomposes in water  (Weast 1979,
    p.  C-465).

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it  emits  toxic fumes of chlorides (Sax 1984, p. 134).

    Hazardous Polymerization:  May Occur:   Not Found
                              May Not Occur:  Not Found

        Conditions to Avoid:  Not  Found


SECTION  V --  HEALTH HAZARD  DATA

    Routes of Entry:   Inhalation:  Yes  (Sax 1984,  p. 134)
                      Skin:  Not  Found
                      Ingestion:  Not Found

    Health Hazards (Acute,  Delayed, and Chronic):   Not Found

    Signs  and Symptoms of  Exposure:   Not  Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid Procedures:  Not Found

-------
                                      CAS Registry Number:  814-68-6
                                      Page 3 of 3
                         ACRYLYL CHLORIDE


SECTION  VI  --  USE INFORMATION

    Monomer;  intermediate (Hawley 1981, p.  17).


SECTION  VII -- PRECAUTIONS FOR  SAFE  HANDLING AND USE
(Steps to  be  Taken in Case Material  is Released or Spilled)

    Avoid  inhalation (see Section V  above).


COMMENTS

    Sources searched but no information found:
        Merck 1983
        Weiss 1980
        NIOSH/OSHA 1978
        ACGIH 1983
        Gosselin 1984
        Encyc Occupat Health and Safety 1983
        DOT 1984
        NFPA  1984
        Student  1981
        Verschueren 1983

-------
                                     CAS Registry  Number:  824-11-3
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31.  1985
                                                   Revision:
CHEMICAL IDENTITY -- TRIMETHYLOLPROPANE PHOSPHITE

CAS Registry  Number:  824-11-3

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume 3, p. 298)
1,3-Propanediol, 2-Ethyl-2-(Hydroxymethyl)-, Cyclic Phosphite (1:1);  4-Ethyl-
1-Phospha-2,6,7-Trioxabicyclo[2.2.2]Octane; 4-Ethy1-2,6,7-Trioxa-1-
Phosphabicyclo[2.2.2]0ctane; 2-(Hydroxymethyl)-2-Ethyl-l,3-Propanediol, Cyclic
Phosphite  (1:1); 1,1,1-Tris-hydroxymethylpropane Bicyclic Phosphite

Chemical Formula:  C,H,,0_P
                    O  11 J
Molecular Weight:  162.14


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC,    inhalation
    (rat)  0.66 mg/liter for  4 hours (*NIOSH/RTECS 1985)


SECTION  II  -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  Not Found

    Specific  Gravity  (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility  in Water:   Not Found

    Appearance and Odor:   Not Found

-------
                                           CAS  Registry Number:  824-11-3
                                           Page 2 of 3
                   TRIMETHYLOLPROPANE PHOSPHITE


SECTION  III  --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Not Found

    Speciaf Fire  Fighting Procedures:  Not Found

    Unusual Fire and Explosion Hazards:  Not Found


SECTION  IV  -- REACTIVITY DATA

    Stability:  Unstable:  Not  Found
                Stable:  Not Found

        Conditions to Avoid:   Not Found

    Incompatibility (Materials  to Avoid):   Not  Found

    Hazardous Decomposition or Byproducts:   Not Found

    Hazardous Polymerization:   May Occur:  Not Found
                              May Not  Occur:  Not Found

        Conditions to Avoid:   Not Found


SECTION  V -- HEALTH HAZARD  DATA

    Routes of Entry:   Inhalation:  Not Found
                      Skin:   Not Found
                      Ingestion:  Not Found

    Health Hazards  (Acute, Delayed,  and  Chronic):  Not Found

    Signs  and Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Not Found

-------
                                          CAS Registry Number:  824-11-3
                                          Page 3 of 3
                   TRIMETHYLOLPROPANE  PHOSPHITE
SECTION VI -- USE  INFORMATION

    Not  Found
SECTION VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps  to be Taken in Case Material is Released or Spilled)

    Not Found
COMMENT

    Sources searched but no information  found:
        Clayton and Clayton 1981-82
        Weast 1979
        Verschueren 1983
        Merck 1983
        Sax 1984
        Student 1981
        NFPA 1984
        Gosselin 1984
        Hayes 1982

-------
                                            CAS  Registry Number:  919-86-8
                                            Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31,  1985
                                                    Revision:
CHEMICAL IDENTITY  -- DEMETON-S-METHYL

CAS Registry Number:  919-86-8

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume 3, p.  158)
Phosphorothioic  Acid,  S-(2-(Ethylthio)Ethyl)  0,0-Dimethyl Ester; BAY 18436;
Bayer 25/154;  0,0-Dimethyl S-(2-Eththioethyl)  Phosphorothioate; Dimethyl
S-(2-Eththioethyl) Thiophosphate;  0,0-Dimethyl  S-(Ethylmercapto)ethyl
Thiophosphate; 0,0-Dimethyl 2-Ethylmercaptoethyl Thiophosphate, Thiolo Isomer;
0,0-Dimethyl  S-(2-(Ethylthio)Ethyl) Phosphorothioate; Isometasystox;
Isomethylsystox;  Ethanethiol, 2-(Ethylthio)-,  S-Ester with 0,0-Dimethyl
Phosphorothioate; S-(2-(Ethylthio)Ethyl)  0,0-Dimethyl Phosphorothioate;
S-(2-(Ethylthio)Ethyl) Dimethyl Phosphorothiolate; S-(2-(Ethylthio)Ethyl)
0,0-Dimethyl  Thiophosphate; Metaisoseptox;  Metaisosystox; Metasystox Forte;
Metasystox (I);  Metasystox J; Methyl Demeton  Thioester; Methyl Isosystox;
Methyl-Mercaptofos Teolovy; Phosphorothioic Acid, 0,0-Dimethyl
S-(2-(Ethylthio)Ethyl) Ester

Chemical Formula:  C,H1CO.PS.
                    o lj J  /

Molecular  Weight:  230.30


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits  Recommended:  Toxicity information:  LC   inhalation

    (rat)  0.5  mg/liter/4 hours (*NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  192°F,  89°C at  0.15 mmHg (Merck 1983,  p.  867)

    Specific Gravity (H20=l):   1.207 at 20°C/4°C (Merck 1983, p.  867)

    Vapor Pressure  (mmHg):  Not Found

-------
                                      CAS Registry Number:  919-86-8
                                      Page 2 of 4
                         DEMETON-S-METHYL


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Melting  Point:  Not Found

    Vapor Density  (AIR=1):   Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:  Soluble (3300 ppm) (Merck 1983, p.  867)

    Appearance and Odor:  Pale yellow oil (Merck 1983, p.  867)


SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:   This compound is  a  liquid organophosphorus
    insecticide (Buchel 1983, p. 66).  Small fires:   dry chemical, carbon
    dioxide, water  spray, or foam.  Large fires:   water spray,  fog or  foam.
    Move container  from fire area if you can do  so without risk.  Fight fire
    from maximum distance.  Dike fire control water for  later disposal; do not
    scatter  the material (DOT 1984, Guide 55).

    Special  Fire Fighting  Procedures:  This compound is a  liquid
    organophosphorus  insecticide (Buchel 1983, p.  66). Keep unnecessary
    people away;  isolate hazard area and deny entry.  Stay upwind; keep out of
    low areas.   Ventilate closed spaces before entering them.   Wear positive
    pressure breathing apparatus and special protective clothing.  Remove and
    isolate  contaminated clothing at the site (DOT 1984, Guide  55).

    Unusual Fire and Explosion Hazards:  When heated to decomposition,  it
    emits  very toxic  fumes  of oxides of phosphorus and sulfur  (Sax 1984, p.
    865).   This compound is a liquid organophosphorus insecticide  (Buchel
    1983,  p.  66).   This material may burn but does not ignite readily.
    Container may explode in heat of fire.  Fire may produce irritating or
    poisonous  gases.  Runoff from fire control water may give off poisonous
    gases  (DOT 1984,  Guide  55).

-------
                                      CAS Registry Number:   919-86-8
                                      Page 3 of 4
                         DEMETON-S-METHYL


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Hydrolyzed by alkali (Hayes 1982,  p.  341)

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:   When heated to  decomposition,
    it emits very toxic fumes of oxides of phosphorus  and sulfur  (Sax  1984, p.
    865).

    Hazardous Polymerization:   May Occur:   Not Found
                               May  Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V --  HEALTH HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Sax 1984,  p.  865)
                      Skin:  Yes (Sax  1984, p. 865)
                      Ingestion:   Yes (Sax 1984,  p. 865)

    Health Hazards (Acute,  Delayed,  and Chronic):  It inhibits the nervous
    system and  is absorbed readily through the skin (Merck 1983,  p. 867).
    This compound is a liquid organophosphorus insecticide (Buchel  1983, p.
    66).  Poisonous; may be fatal if inhaled, swallowed  or absorbed through
    skin.   Contact may cause burns to skin and eyes (DOT 1984, Guide 55).

    Signs and Symptoms of Exposure:   Similar to parathion (Merck 1983,  p.
    867).   Symptoms may include nausea, vomiting,  abdominal cramps, diarrhea,
    excessive salivation, headache, giddiness, dizziness, weakness, muscle
    twitching, difficult breathing, blurring or dimness  of vision,  and loss of
    muscle coordination.  Death may occur from failure of the respiratory
    center, paralysis of the respiratory muscles,  and/or intense
    bronchoconstriction (Gosselin 1984, p. III-340).

    Medical Conditions Generally Aggravated by Exposure:  Not  Found

-------
                                      CAS Registry Number:  919-86-8
                                      Page 4 of 4
                          DEMETON-S-METHYL
SECTION  V -- HEALTH HAZARD DATA (Continued)

    Emergency and First Aid Procedures:  Similar to treatment for other
    organic phosphorus  insecticides  (Hayes 1982, p. 342).   Move victim  to
    fresh air; call  emergency medical care.  If not breathing,  give artificial
    respiration.   If  breathing  is difficult, give oxygen.   In case of contact
    with material,  immediately  flush skin or eyes with running water for at
    least 15 minutes.   Speed in removing material from skin is  of extreme
    importance.   Remove and  isolate contaminated clothing and shoes at  the
    site.   Keep victim  quiet and maintain normal body temperature.   Effects
    may be delayed; keep victim under observation (DOT 1984,  Guide 55).


SECTION  VI --  USE  INFORMATION

    This material is  an insecticide  (Merck 1983, p. 867).   Not  registered as a
    pesticide in the  U.S.  (USEPA/Pesticide Index 1985).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken  in Case Material is Released or Spilled)

    This compound is  a  liquid organophosphorus insecticide (Buchel 1983, p.
    66).  Do not touch  spilled  material; stop leak if you can do so without
    risk.   Wear positive pressure breathing apparatus and special protective
    clothing.   Use water spray  to reduce vapors.  Small  spills:   absorb with
    sand or other noncombustible absorbent material and  place into containers
    for later disposal.   Large  spills:  dike far ahead of spill for later
    disposal (DOT 1984,  Guide 55).


COMMENTS

    Sources searched  but no  information found:
        ACGIH 1983
        NIOSH/OSHA  1978
        Hawley 1981
        Weast 1979
        NFPA 1984
        Student  1981
        Weiss 1980
        CHRIS 1978
        Clayton and Clayton  1981-82
        Arena 1979
        Encyc Occupat Health and Safety 1983
        Physicians' Desk Reference 1985
        Gilman 1985

-------
                                     CAS Registry Number:  920-46-7
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October  31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  METHACRYLOYL CHLORIDE

CAS Registry  Number:  920-46-7

Synonyms:  (SANSS 1983 Synonyms):  2-Propenoyl Chloride, 2-Methyl-;
Methacryl  Chloride; Methacrylic Acid Chloride; Methacrylic Chloride;
Methacrylyl Chloride; Methylaeryloyl Chloride

Chemical Formula:   C.H..C10
                    4 5

Molecular  Weight:  105


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC   inhalation

    (rat)  0.06 mg/liter/4 hours (*NIOSH/RTECS  1985)


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   205°F, 96°C (Weast 1983, p. C-371)

    Specific  Gravity (H20=l):   1.0871 at  20°C/4°C (Weast 1983, p. C-371)

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:  Not Found

    Appearance and Odor:  Not Found

-------
                                     CAS  Registry Number:  920-46-7
                                     Page 2 of 3
                      METHACRYLOYL CHLORIDE


SECTION III  -- FIRE AND  EXPLOSION HAZARD DATA

    Flash Point (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not  Found
        UEL:   Not  Found

    Extinguishing Methods:  Not Found

    Special Fire Fighting Procedures:   Not Found

    Unusual Fire and Explosion Hazards:  Not Found


SECTION IV  -- REACTIVITY DATA

    Stability:   Unstable:   Not Found
                Stable:  Not Found

        Conditions  to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:   Not Found
                              May Not Occur:   Not  Found

        Conditions  to Avoid:  Not Found


SECTION V -- HEALTH HAZARD DATA

    Routes  of Entry:   Inhalation:   Not Found
                      Skin:  Not Found
                      Ingestion:   Not Found

    Health Hazards  (Acute, Delayed, and Chronic): Not Found

    Signs and Symptoms of Exposure:  Not  Found

    Medical Conditions Generally Aggravated by  Exposure:   Not Found

    Emergency and  First Aid Procedures:  Not Found

-------
                                     CAS Registry Number:   920-46-7
                                     Page 3 of 3
                      METHACRYLOYL CHLORIDE
SECTION  VI  -- USE INFORMATION

    Not Found
SECTION  VII -- PRECAUTIONS  FOR SAFE HANDLING AND USE
(Steps to  be Taken in Case Material is Released or Spilled)

    Not Found
COMMENTS:

    Sources searched but no information found:
        ACGIH  1983
        NIOSH/OSHA 1978
        Hawley 1981
        Merck  1983
        Sax 1984
        DOT 1984
        NFPA 1984
        Student 1981
        Weiss  1980
        CHRIS  1978
        Doull  1980
        Clayton and Clayton 1981-82
        Arena  1979
        Gosselin 1984
        Encyc Occupat Health and Safety 1983
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes  1982
        Physicians' Desk Reference 1985
        Oilman 1985
        Verschueren 1983

-------
                                      CAS  Registry Number:  944-22-9
                                      Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October  31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- FONOFOS

CAS Registry Number:   944-22-9

Synonyms:  Phosphonodithioic Acid, Ethyl-,  0-Ethyl  S-Phenyl Ester;
Dyphonate;  Difonate; Difonatul;  Dyfonat;  Dyfonate; Ethylphosphonodithioic Acid
0-Ethyl S-Phenyl Ester; Fonofos; 0-Ethyl  S-Phenyl Ethyldithiophosphonate;
0-Ethyl S-Phenyl Ethylphosphonothiolothionate; Phosphonodithioic Acid, Ethyl-,
0-Ethyl S-Phenyl Ester; ENT 25,796;
N 2790; N-2790; Stauffer N 2790

Chemical Formula:   C  H  OPS

Molecular Weight:  246.32


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   TWA  0.1  mg/m3 (skin) (*ACGIH 1980)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LDcQ oral  (domestic
    animal)  1.3 mg/kg (*NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   266°F,  130°C at 0.1 mmHg (*Merck  1976)

    Specific Gravity (H20=l):  1.16 at 25°C (*Merck 1976)

    Vapor Pressure  (mmHg):  2.1 x 10"4 at 25°C  (*Worthing 1979)

    Melting Point:   Not Found

    Vapor Density (AIR=1): Not Found

    Evaporation Rate (Butyl acetate=l):   Not Found

    Solubility in Water:  13 ppm  at 22°C  (*Spencer  1973)

-------
                                            CAS Registry Number:   944-22-9
                                            Page 2 of 3
                             FONOFOS
SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS (Continued)

    Appearance and Odor:  Light yellow liquid (-Merck  1976); pungent
    mercaptan-like  odor  ("Worthing 1979)
SECTION  III  --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:  Not Found

    Extinguishing Methods:  This compound  is  a  liquid organophosphorus
    insecticide  (Buchel 1983, p. 82).   Extinguish with dry chemical, carbon
    dioxide,  water spray,  fog, or foam (DOT 1984,  Guide  55).

    Special Fire Fighting  Procedures:   This compound  is  a liquid
    organophosphorus insecticide (Buchel 1983, p.  82).   Keep unnecessary
    people away;  isolate hazard area and deny  entry.  Stay upwind; keep out of
    low areas.   Ventilate  closed spaces before entering  them.  Wear positive
    pressure  breathing apparatus and special protective  clothing.  Remove and
    isolate contaminated clothing at the site.  Move  container from fire area
    if you can do so without risk.  Fight fire from maximum distance.  Dike
    fire control  water for later disposal;  do  not scatter the material (DOT
    1984,  Guide  55).

    Unusual  Fire and Explosion Hazards:  When this material  is  heated to
    decomposition, it can  emit highly toxic fumes of  phosphorus oxides (*Sax
    1979).


SECTION  IV  --  REACTIVITY DATA

    Stability: Unstable:
                 Stable:  Yes (*Worthing 1979)

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):  Not  Found

    Hazardous Decomposition or Byproducts:  When heated it can emit highly
    toxic  fumes  of phosphorus oxides (*Sax 1979).

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  944-22-9
                                            Page 3 of 3
                              FONOFOS
SECTION V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes  (Non-Specific -- Organic Phosphorus
                                   Pesticide)  (Hayes 1982, p. 301)
                       Skin:   Yes  (*Rumack 1975  to  Present)
                       Ingestion:   Yes (*Rumack  1975 to Present)

    Health Hazards  (Acute, Delayed, and Chronic):   This material  is  a
    cholinesterase inhibitor  ("Merck  1976).  It  can cause severe symptoms and
    death from respiratory arrest  (*Gosselin 1976).

    Signs and Symptoms of Exposure:  Symptoms  include nausea, vomiting,
    abdominal cramps,  diarrhea,  excessive  salivation, headache, giddiness,
    vertigo,  sensation of  tightness in chest, blurring of vision,  ocular pain,
    loss of muscle coordination, slurring  in speech, muscle twitching,
    drowsiness,  excessive  secretion of respiratory tract mucous, and
    convulsions  (*Gosselin 1976).

    Medical Conditions Generally Aggravated by  Exposure:  Not Found

    Emergency and  First Aid Procedures:  This  compound is a liquid
    organophosphorus insecticide (Buchel 1983, p. 82).  Move victim to  fresh
    air; call emergency medical  care.  If  not breathing, give artificial
    respiration.   If breathing is  difficult, give oxygen.  In case of contact
    with material, immediately flush  skin  or eyes with running water for at
    least 15  minutes.   Speed  in  removing material from skin is of extreme
    importance.   Remove and isolate contaminated clothing and shoes at  the
    site.  Keep  victim quiet  and maintain  normal body temperature.  Effects
    maj  be delayed;  keep victim under observation (DOT 1984, Guide 55).


SECTION VI  --  USE INFORMATION

    This material is used  primarily as an  insecticide for corn (*Spencer 1973).


SECTION VII  --  PRECAUTIONS  FOR  SAFE HANDLING AND USE
(Steps to be  Taken in Case Material is Released  or Spilled)

    This compound is a liquid organophosphorus insecticide (Buchel 1983, p.
    82).  Keep unnecessary people  away; isolate  hazard area and deny entry.
    Stay upwind;  keep out  of  low areas.  Ventilate closed spaces before
    entering  them.  Wear positive  pressure breathing apparatus and special
    protective clothing.   Remove and  isolate contaminated clothing at the
    site.  Do not touch spilled material;  stop leak if you can do so without
    risk.  Use water spray to reduce  vapors.  Small spills:  absorb with sand
    or other  noncombustible absorbent material and place into containers for
    later disposal.   Large spills:  dike far ahead of spill for later disposal
    (DOT 1984, Guide 55).

-------
                                      CAS  Registry Number:  947-02-4
                                      Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- PHOSFOLAN

CAS Registry Number:   947-02-4

Synonyms:  Imidocarbonic  Acid, Phosphonodithio-,  Cyclic Ethylene
P,P-Diethy°l  Ester; Cyolane; (Diethoxyphosphinyl)Dithioimidocarbonic Acid
Cyclic Ethylene Ester; 1,2-Ethanedithiol,  Cyclic Ester with P,P-Diethyl
Phosphonodithioimidocarbonate; 1,2-Ethanedithiol, Cyclic S,S-Ester with
Phosphonodithioimidocarbonic Acid P,P-Diethyl Ester; 2-(Diethoxy-
phosphinylimino)-l,3-Dithiolane;  AC 47031;  American Cyanamid CL-47031;
American Cyanamide 47031; Cayolan; CL 47031; CL-47031; Cyalane;  Cyclic
Ethylene(Diethoxyphosphinothioyl) Dithioimidocarbonate; Cylan; Cyolan; Cyolane
Insecticide;  El 47301; ENT 25,830; Imidocarbonic Acid, (Diethoxyphosphinyl)
Dithio-, Cyclic Ethylene Ester; Imidocarbonic Acid, Phosphonodithio-,
P,P-Diethyl  Cyclic Ethylene Ester; P,P-Diethyl Cyclic Ethylene Ester of
Phosphonodithioimidocarbonic Acid; Phosphoramidic Acid, 1,3-DithioIan-2-
ylidene-, Diethyl Ester

Chemical Formula:  C?H  N03PS

Molecular Weight:  255.3
SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not  Found

    IDLH:  Not  Found

    Other Limits Recommended:   Toxicity  information:  ID   oral  (rat) 9

    mg/kg (*NIOSH/RTECS 1985)
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  239-244.4°F,  115°-118°C at Ixio"3 mmHg
    (*Worthing 1979)

    Specific Gravity (H 0=1):   Not  Found

    Vapor Pressure  (mmHg):  Not Found

-------
                                            CAS Registry Number:   947-02-4
                                            Page 2 of 4
                             PHOSFOLAN
SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Melting Point:  98.6°-113°F,  37°-45°C (^Worthing  1979)

    Vapor  Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:  Soluble (^Worthing 1979)

    Appearance and Odor:  Colorless to yellow solid (-Worthing  1979).  No
    odor information.


SECTION III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  (Non-Specific  -- Organophosphorus Pesticide,
    n.o.s.)  Extinguish with dry chemical,  carbon  dioxide, water  spray, foam,
    or fog (DOT 1984, Guide 55).

    Special  Fire Fighting  Procedures:  (Non-Specific  --  Organophosphorus
    Pesticide,  n.o.s.)  Fight fire from maximum distance.  Dike fire control
    water for later disposal; do not scatter the material.  Wear  positive
    pressure breathing apparatus and special protective  clothing  (DOT 1984,
    Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)  This material may burn  but does  not ignite readily.
    Container may explode in heat of fire (DOT  1984,  Guide 55).   When heated
    to decomposition, it emits very toxic fumes of oxides  of phosphorus,
    sulfur,  and nitrogen (Sax 1984, p. 2210).


SECTION IV --  REACTIVITY DATA

    Stability:   Unstable:
                Stable:  Yes (*Worthing 1979)

        Conditions to Avoid:  Hydrolyzed by alkalies  (^Worthing 1979)

    Incompatibility  (Materials to Avoid):  Not Found

-------
                                            CAS Registry Number:   947-02-4
                                            Page 3 of 4
                             PHOSFOLAN
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Decomposition or Byproducts:  When heated to  decomposition,
    it emits very toxic  fumes of oxides of phosphorus,  sulfur,  and nitrogen
    (Sax 1984, p.  2210).

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Yes  (*Rumack 1975 to Present)
                      Ingestion:   Yes (-Rumack 1975  to  Present)

    Health Hazards  (Acute, Delayed,  and  Chronic):  Similar to parathion.
    Death  may result due to respiratory arrest as a result of paralysis of
    respiratory muscles and intense bronchoconstriction  (*Gosselin  1976).
    Also considered  a cholinesterase inhibitor (*Soliman 1979).

    Signs  and  Symptoms of Exposure:  Symptoms similar to parathion and
    include nausea,  vomiting, abdominal cramps, diarrhea,  excessive
    salivation, headache,  giddiness, dizziness, weakness,  tightness  in the
    chest, blurring  or dimness of vision, tearing,  loss  of muscle
    coordination,  slurring of speech, twitching of muscles, drowsiness,
    difficulty in  breathing, respiratory rales, and random jerky movements
    (*Gosselin 1976).

    Medical Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)  Move victim to fresh air; call emergency medical
    care.   If not  breathing give artificial respiration.  If breathing is
    difficult,  give  oxygen.  In case of contact with material, immediately
    flush  skin or  eyes with running water for at least 15  minutes.   Speed in
    removing material from skin is of extreme importance.  Remove and isolate
    contaminated clothing  and shoes at the site.  Keep victim quiet  and
    maintain normal  body temperature.  Effects may be delayed; keep  victim
    under  observation (DOT 1984, Guide 55).

-------
                                           CAS Registry Number:  947-02-4
                                           Page 4 of 4
                            PHOSFOLAN
SECTION VI -- USE INFORMATION

    Insecticide (*Farm Chemicals  Handbook 1981)


SECTION VII -- PRECAUTIONS  FOR SAFE HANDLING AND USE
(Steps  to be Taken in Case Material is Released or Spilled)

    (Non-Specific -- Organophosphorus Pesticide, n.o.s.)   Keep  unnecessary
    people away.  Do not touch spilled material.  Use water spray to reduce
    vapors.  Take up spills with  noncombustible absorbent  materials.  Small
    dry spills:  with clean shovel place material into clean, dry container
    and cover; move container from spill area.  For large  spills dike far
    ahead of spill for later disposal.  Wear positive pressure  breathing
    apparatus and special protective clothing (DOT 1984, Guide  55).

-------
                                           CAS Registry Number:   950-10-7
                                           Page 1 of 3
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- MEPHOSFOLAN

CAS Registry Number:   950-10-7

Synonyms:,  (NIOSH/RTECS 1983 Synonyms, Volume 2, p. 177)  1,3-Dithiolane,
2-(Diethoxyphosphinylimino)-4-Methyl-;  AC 47470; Cyclic Propylene  (Diethoxy-
phosphinyl)Dithioimidocarbonate;  Cytrolane; 2-(Diethoxyphosphinylimino)-4-
Methyl-1,3-Dithiolane; P,P-Diethyl Cyclic Propylene Ester of Phosphonodithio-
imidocarbonic Acid; Diethyl (4-Methyl-l,3-Dithiolan-2-ylidene)  Phosphoro-
amidate;  EI-47470; ENT-25,991

Chemical Formula:  C0H,.NO-PS.
                    o lo  o   i
Molecular Weight:  269.34


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits  Recommended:   Toxicity information:   LD   oral  (rat) 9
    mg/kg (*NIOSH/RTECS  1985)


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  248°F,  120°C at 0.001 mmHg (Merck 1983, p. 835)

    Specific Gravity (H2
-------
                                           CAS Registry Number:  950-10-7
                                           Page 2 of 3
                           MEPHOSFOLAN
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Appearance and  Odor:  Yellow to amber  liquid  (Merck 1983, p.  835);  no
    odor information
SECTION  III  --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):   Not  Found
    Flammable Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:   (Non-Specific -- Organic Phosphate,  Liquid)
    Use agent  suitable for surrounding fire.  Use water in flooding quantities
    as fog.  Use foam, carbon dioxide, or dry chemical (Student 1981,  p.  381).

    Special Fire  Fighting  Procedures:   (Non-Specific -- Organic Phosphate,
    Liquid)  Use water spray to absorb vapors.  Avoid breathing vapors.   Keep
    upwind.  Wear self-contained breathing apparatus.  Avoid bodily contact
    with the material.  Wear full protective clothing (Student 1981, p.  381).

    Unusual Fire and Explosion Hazards:  When  heated to  decomposition, this
    material emits very toxic fumes  of nitrogen oxides, phosphorus oxides and
    sulfur oxides (Sax 1984, p. 980).


SECTION  IV --  REACTIVITY DATA

    Stability:  Unstable:
                 Stable:  Yes  (at neutral pH) (Merck 1983, p.  835)

        Conditions to Avoid:  Hydrolyzed by  acid or  alkali (Merck 1983, p.
        835)

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Nitrogen oxides, phosphorus
    oxides, and  sulfur oxides are emitted when this material is heated to
    decomposition (Sax 1984, 980).

    Hazardous Polymerization:  May  Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  950-10-7
                                            Page 3 of 3
                           MEPHOSFOLAN
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (Non-Specific -- Organic Phosphorus
                                  Pesticide) (Hayes 1982,  p.  301)
                       Skin:   Yes  (Sax 1984, p. 980)
                       Ingestion:  Yes (Sax 1984,  p.  980)

    Health Hazards  (Acute, Delayed,  and  Chronic):  This material is highly
    toxic if swallowed  or  absorbed through the skin (Sax 1984,  p. 980).

    Signs and Symptoms of Exposure:   (Non-Specific -- Organic Phosphorus
    Pesticides)   Signs  and symptoms include headache, giddiness,  nervousness,
    blurred vision,  weakness,  nausea, vomiting, cramps, diarrhea, and
    discomfort in the chest.   In severe cases there may be  convulsions,  coma,
    loss of reflexes, and  loss of sphincter control (Hayes  1982,  p.  301).

    Medical Conditions  Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid Procedures:  Treat immediately.   (Non-Specific
    -- Organic Phosphorus  Pesticide)  If this material has  been ingested or
    inhaled, and the patient  is  conscious, induce vomiting, give milk  or
    water, and induce vomiting again.  If there has been skin  contact, wash
    contacted areas  with soap and water followed by alcohol.   If there has
    been eye contact, irrigate with water (Hayes 1982,  p.  313).


SECTION  VI --  USE INFORMATION

    This material is an insecticide and acaricide (Merck 1983,  p. 835).  Not
    registered as a  pesticide in the U.S. (USEPA/Pesticide  Index 1985).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING  AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    (Non-Specific -- Organic  Phosphate, Liquid)  Use water  spray to  knock  down
    vapors.  Build dikes to contain material as necessary.   Avoid breathing
    vapors.  Keep upwind.   Wear  self-contained breathing aparatus.   Avoid
    bodily contact with the material.  Wear full protective clothing.
    Downwind evacuation should be considered (Student 1981, p.  381).


COMMENT

    Sources searched but no information was found:
        Clayton and  Clayton 1981-82
        Weast 1979
        Verschueren  1983
        Gosselin 1984
        Buschel 1983
        Farm Chemicals  Handbook  1984

-------
                                      CAS Registry Number:  950-37-8
                                      Page 1 of 4
                        EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date:  October  31.  1985
                                                    Revision:
CHEMICAL IDENTITY  --  METHIDATHION

CAS Registry Number:  950-37-8

Synonyms:  Phosphorodithioic Acid,  0,0-Dimethyl Ester, S-Ester with
4-(Mercaptomethyl)-2-Methoxy-delta(sup2)-l,3,4-Thiadiazolin-5-one; Supracide;
(0,0-Dimethyl)  S-(2-Methoxy-delta(sup2)-l,3,4-Thiadiazolin-5-on-4-ylmethyl)
Dithiophosphate; DMTP; ENT 27193; Geigy 13005; Geigy GS-13005;  GS  13005;
Medathion; 0,0-Dimethyl S (5-Methoxy-l,3,4-Thiadiazolinyl-3-Methyl)
Dithiophosphate; 0,0-Dimethy1  S-(2-Methoxy-1,3,4,-Thiadiazol-5(4H)-
onyl-(4)-Methyl)Phosphorodithioate; Phosphorodithioic Acid, 0,0-Dimethyl
Ester, S-Ester  with 4-(Mercaptomethyl)-2-Methoxy-delta(sup2)-l,3,4-
Thiadiazolin-5-one;  Phosphorodithioic Acid, S-[(5-Methoxy-2-Oxo-l,3,4-
Thiadiazol-3(2H)-yl)Methyl) 0,0-Dimethyl Ester; S-(2,3-Dihydro-5-Methoxy-
2-Oxo-l,3,4-Thiadiazol-3-Methyl) Dimethyl Phosphorothiolothionate;
S-2,3-Dihydro-5-Methoxy-2-Oxo-l,3,4-Thiadiazol-3-ylmethyl  0,0-Dimethyl
Phosphorodithioate;  S-[(5-Methoxy-2-Oxo-1,3,4-Thiadiazol-3(2H)-yl)Methyl]
0,0-Dimethyl  Phosphorodithioate; Somonil; Supracid;  Ultracid; Ultracid 40;
Ultracide; Ultracide Ciba-Geigy

Chemical Formula:   C-H.,, N_O.PS-
                    O 11 J. H  J

Molecular Weight:   302.34


SECTION I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL: Not Found

    ACGIH TLV:   Not  Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC  inhalation

    (rat) 3.6 mg/liter/4  hours; LD5Q oral (rat) 20  mg/kg  (*NIOSH/RTECS 1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H20=l):   1.495  at  20°C  (Hayes  1982,  p. 371)

-------
                                            CAS  Registry Number:   950-37-8
                                            Page 2 of 4
                           METHIDATHION
SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS (Continued)

    Vapor Pressure  (mmHg):  1 x 10"6 at 20°C (^Worthing  1979)

    Melting Point:  102-104°F,  39-40°C (-Worthing 1979)

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl  acetate=l):  Not Found

    Solubility  in Water:  240 mg/liter at 25°C (^Worthing  1979)

    Appearance and  Odor:  Colorless crystals  (-Worthing 1979)


SECTION  III  -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  (Non-Specific  -- Organophosphorus Pesticide,
    n.o.s.)  This  material may burn, but does not  ignite  readily.  For small
    fires,  use dry chemical, carbon dioxide,  water  spray, or  foam.  For large
    fires,  use water spray, fog, or foam (DOT 1984,  Guide 55).

    Special Fire Fighting  Procedures:   (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)  Stay upwind; keep out of low areas.   Move container
    from fire  area if you can do so without risk.   Fight  fire from maximum
    distance.   Dike  fire control water for later disposal; do not scatter the
    material.   Wear positive pressure breathing apparatus and special
    protective clothing (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific --  Organophosphorus
    Pesticide,  n.o.s.)  Container may explode in heat of  fire.  Fire and
    runoff from fire control water may produce  irritating or  poisonous gases
    (DOT 1984,  Guide 55).

-------
                                            CAS Registry Number:  950-37-8
                                            Page 3 of 4
                            METHIDATHION
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes, in neutral or weak acid solution  (*Martin
                         and Worthing 1974)

        Conditions  to Avoid:  Hydrolyzed by alkali (^Worthing 1979)

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:  Not  Found
                               May Not Occur:  Not  Found

        Conditions  to Avoid:  Not Found


SECTION  V --  HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Non-specific  -- Organophosphorus
                                  Pesticide)  (Hayes  1982,  p.  301)
                      Skin:  Yes (Non-Specific  -- Organophosphorus
                             Pesticide) (Hayes 1982,  p.  301)
                      Ingestion:   Yes (Hayes  1982, p. 301)

    Health Hazards (Acute,  Delayed,  and  Chronic):  This material is
    poisonous to humans.  Its toxic effects are by action on the nervous
    system.   Human  volunteers ingesting 0.11 mg/kg/day for  6 weeks had no
    clinical effects  (Hayes 1982, p. 371).

    Signs and Symptoms of Exposure:  Symptoms  are similar to parathion
    poisoning and may include nausea, vomiting, abdominal cramps, diarrhea,
    excessive salivation, headache,  dizziness,  giddiness,  weakness, muscle
    twitching, difficult breathing,  sensation of tightness  of chest, blurring
    or dimness of vision, and loss of muscle coordination.   Death may occur
    from failure of the respiratory center, paralysis  of the respiratory
    muscles,  intense bronchoconstriction, or all three (*Gosselin 1976).

    Medical  Conditions Generally Aggravated by Exposure:   Not Found

-------
                                            CAS Registry Number:  950-37-8
                                            Page 4 of 4
                           METHIDATHION
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Emergency and First Aid Procedures:   (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)   Move victim to fresh air; call emergency medical
    care.   If not  breathing, give artificial respiration.   If breathing is
    difficult,  give oxygen.  In case of contact with material,  immediately
    flush  skin or  eyes with running water for at least 15  minutes.   Speed in
    removing material from skin is of extreme importance.   Remove and  isolate
    contaminated clothing and shoes at the site.  Keep victim quiet  and
    maintain normal body temperature.  Effects may be delayed;  keep, victim
    under  observation (DOT 1984, Guide 55).
SECTION  VI  --  USE INFORMATION

    This material  is used as a non-systemic insecticide (^Worthing 1979).


SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be  Taken in Case Material is Released or Spilled)

    (Non-Specific  -- Organophosphorus Pesticide, n.o.s.)   Stay upwind; keep
    out of low areas.  Ventilate closed spaces before entering them.  Wear
    positive  pressure breathing apparatus and special protective  clothing.  Do
    not touch spilled material; stop leak if you can do so without risk.  Use
    water spray  to reduce vapors.  Small spills:  absorb with sand or other
    noncombustible absorbent material and place into containers for later
    disposal.  Small dry spills:  with clean shovel place material into clean,
    dry containers and cover; move containers from spill area.  Large spills:
    dike far  ahead of spill for later disposal (DOT 1984, Guide 55).

-------
                                           CAS Registry Number:  991-42-4
                                           Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- NORBORMIDE

CAS Registry Number:   991-42-4

Synonyms:  5-Norbornene-2,3-Dicarboximide, 5-(alpha-Hydroxy-alpha-2-
Pyridylbenzyl)-7-(alpha-2-Pyridylbenzylidene)-; Compound S-6,999;  Raticide;
Raticate;  ENT 51,762; Shoxin; McN 1025;  McNeil  1025; 4,7-Methano-lH-Isoindole-
l,3(2H)-Dione,3a,4,7,7a-Tetrahydro-5-(Hydroxyphenyl-2-Pyridinylmethyl)-8-
(Phenyl-2-Pyridinylmethylene)-; S 6999;  S-6,999

Chemical Formula:  C33H25N3°3

Molecular  Weight:  511.55


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits  Recommended:   Toxicity  information:   I^cn oral  (rat) 5.3
    mg/kg  ("NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H  0=1):  Not Found

    Vapor Pressure  (mmHg):  Not Found

    Melting Point:  374-388°F,  190-198°C (*Merck 1976)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl  acetate=l):  Not Found

    Solubility in Water:   Practically insoluble  unless pH is less than 4
    (*Merck 1976); 60 mg/liter at room temperature  (^Worthing 1979)

-------
                                            CAS Registry Number:  991-42-4
                                            Page 2 of 3
                            NORBORMIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Appearance and Odor:  Colorless  to  off-white crystalline powder
    ('^Worthing 1979)


SECTION  III  -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not  Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing Methods:   (Non-Specific -- Pesticide, Solid,  n.o.s.)
    Small  fires:   dry chemical, carbon dioxide, water spray, or foam.   Large
    fires:  water spray, fog, or foam.  Move container from fire area if you
    can do so  without risk (DOT 1984,  Guide 53).

    Special Fire Fighting  Procedures:   (Non-Specific -- Pesticide,  Solid,
    n.o.s.)  Keep unnecessary people away; isolate hazard area and  deny
    entry.  Stay  upwind; keep out of low  areas.  Wear self-contained (positive
    pressure if   available)  breathing  apparatus and full protective clothing
    (DOT 1984, Guide 53).

    Unusual Fire  and Explosion Hazards:   When heated to decomposition, it
    emits  toxic fumes of nitrogen oxides  (Sax  1984, p. 2069).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:
                 Stable:  Yes (^Worthing  1979)

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Alkalies (^Worthing 1979)

    Hazardous Decomposition or Byproducts:  Nitrogen oxides when  heated  to
    decomposition (Sax  1984, p. 2069).

    Hazardous Polymerization:  May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  991-42-4
                                            Page 3 of 3
                            NORBORMIDE
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:   Not Found
                      Ingestion:  Yes (*Gosselin .1976)

    Health Hazards  (Acute, Delayed,  and Chronic):  Moderately to highly
    toxic  to humans.   Probable human lethal dose is 50 to 500  mg/kg,  or  1
    teaspoon to 1  pint for a  150 Ib. person (*Gosselin 1976).

    Signs  and  Symptoms of Exposure:   Exposure may cause a transient
    decrease in temperature and blood pressure (*Gosselin 1976) .

    Medical  Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid  Procedures:  (Non-Specific --  Pesticide, Solid,
    n.o.s.)   Move  victim to fresh air; call emergency medical  care.   Remove
    and isolate contaminated  clothing and shoes at the site.   In  case of
    contact  with material, immediately flush skin or  eyes with running water
    for at least 15  minutes (DOT 1984, Guide 53).
SECTION  VI  --  USE  INFORMATION

    This material  is  used as a selective rat poison (*Merck 1976).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be  Taken in Case Material is Released or Spilled)

    (Non-Specific  --  Pesticide, Solid, n.o.s.)  Do not touch  spilled material;
    stop leak if you  can do so without risk.  Small spills:   absorb with sand
    or other  noncombustible absorbent material and place into containers for
    later disposal.   Small dry spills:  with clean shovel place material into
    clean, dry container and cover; move containers from spill area.  Large
    spills:   dike  far ahead of spill for later disposal (DOT  1984, Guide 53).

-------
                                     CAS Registry Number:   998-30-1
                                     Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October 31,  1985
                                                  Revision:
CHEMICAL IDENTITY --  TRIETHOXYSILANE

CAS Registry Number:  998-30-1

Synonyms:  (NIOSH/RTECS  1983 Synonyms, Volume 3, p. 593)   Silane,
Triethoxy-

Chemical Formula:   C,H.,,0.,Si
                    o ID o
Molecular  Weight:  164.31


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC 0 inhalation
    (mouse) 0.5 mg/liter/2 hours (*NIOSH/RTECS 1985)


SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   270-275°F,  132-135°C (Weast  1983, p. C-516)

    Specific Gravity (H 0=1):  0.8745 at 20°C/4°C (Weast 1983,  p. C-516)

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl  acetate=l):  Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:   Not Found

-------
                                      CAS Registry Number:  998-30-1
                                      Page 2 of 4
                          TRIETHOXYSILANE
SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:   (Non-Specific -- Poisonous  Liquid, n.o.s.)
    Small  fires:   dry chemical, carbon dioxide, water spray,  or foam.  Large
    fires:  water spray,  fog, or foam (DOT 1984, Guide 55).

    Special  Fire Fighting Procedures:  (Non-Specific --  Poisonous Liquid,
    n.o.s.)   Keep unnecessary people away; isolate hazard area and deny
    entry.  Stay upwind;  keep out of low areas.  Ventilate closed spaces
    before entering  them.   Wear positive pressure breathing apparatus and
    special  protective clothing.  Remove and isolate contaminated clothing at
    the site.   Move  container from fire area if you can do so without risk.
    Fight  fire from  maximum distance.  Dike fire control water for later
    disposal;  do not scatter  the material (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:  When heated to decomposition,  it
    emits  acrid smoke and fumes (Sax 1984, p. 2637).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:   Not Found
                 Stable:  Not Found

        Conditions  to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated to  decomposition,
    it emits acrid  smoke and fumes (Sax 1984, p.  2637)..

    Hazardous Polymerization:   May Occur:   Not Found
                               May  Not Occur:  Not Found

        Conditions  to Avoid:  Not Found


SECTION  V --  HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Not Found

-------
                                      CAS Registry Number:  998-30-1
                                      Page 3 of 4
                         TRIETHOXYSILANE


SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Health Hazards (Acute,  Delayed,  and Chronic):  Toxicity is similar to
    silanes (Sax 1984, p. 2637).  Silanes are moderately irritating to skin,
    eyes,  and mucous membranes  (Sax 1984, p. 2395).   Silane  compounds are
    toxic  (Hawley 1981,  p. 919).

    Signs  and Symptoms of Exposure:   Not  Found

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid Procedures:   (Non-Specific --  Poisonous Liquid,
    n.o.s.)  Move victim to  fresh air; call emergency medical  care.  If not
    breathing,  give artificial  respiration.  If breathing is difficult, give
    oxygen.  In case of  contact with material, immediately flush skin or eyes
    with running water for at least 15 minutes.  Speed in removing material
    from skin is of extreme  importance.  Remove and  isolate  contaminated
    clothing and shoes at the site.  Keep victim quiet and maintain normal
    body temperature.  Effects  may be delayed; keep  victim under observation
    (DOT 1984,  Guide 55).


SECTION  VI --  USE INFORMATION

    Not Found
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or Spilled)

    (Non-Specific -- Poisonous Liquid, n.o.s.)  Keep unnecessary people away;
    isolate hazard  area and deny entry.  Stay upwind;  keep out  of  low areas.
    Ventilate closed spaces before entering them.   Wear  positive pressure
    breathing apparatus and special protective clothing.  Remove and isolate
    contaminated  clothing at the site.  Do not touch spilled  material; stop
    leak if you can do so without risk.  Use water spray to reduce vapors.
    Small  spills:   absorb with sand or other noncombustible absorbent material
    and place into  containers for later disposal.   Large spills:   dike far
    ahead  of spill  for later disposal  (DOT 1984, Guide 55).

-------
                                      CAS Registry Number:  998-30-1
                                      Page 4 of 4
                          TRIETHOXYSILANE
COMMENTS:

    Sources searched but  no  information found:
        ACGIH 1983                 .
        NIOSH/OSHA  1978
        Hawley 1981
        Weast 1979
        Merck 1983
        NFPA 1984
        Student 1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton and Clayton  1981-82
        Arena 1979
        Gosselin 1984
        Encyc Occupat Health and Safety 1983
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes 1982
        Physicians'  Desk  Reference 1985
        Oilman 1985

-------
                                           CAS Registry Number:  999-81-5
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- CHLORMEQUAT CHLORIDE

CAS Registry Number:  999-81-5

Synonyms:  (2-Chloroethyl)Trimethylammonium Chloride; 60-CS-16;
Antywylegacz;  beta-Chloroethyltrimethylammonium Chloride; CCC; CCC Plant
Growth Regulant; CE CE CE;  Chlorocholine Chloride;  Chlorcholine Chloride;
Cycogan;  Cycogan Extra; Cyocel;  El  38,555; Ethanaminium,  2-Chloro-
N,N,N-Trimethyl-, Chloride; NCI-C02960; Retacel; Stabilan; Trimethyl-beta-
Chloroethylammonium Chloride;  TUR

Chemical Formula:   C H13C12N

Molecular  Weight:  158.07


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not  Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  ID..   oral (human)
    10 mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not  Found

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure  (mmHg):  Not Found

    Melting Point:   473°F,  245°C; decomposes (Merck 1983, p.  295)

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate (Butyl acetate=l):   Not Found

    Solubility in Water:  Soluble (Merck 1983, p. 295)

-------
                                           CAS Registry Number:   999-81-5
                                           Page 2 of 3
                       CHLORMEQUAT CHLORIDE
SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Appearance and Odor:  White crystals with a fish-like odor  (Merck 1983,
    p.  295)
SECTION  III  -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:   (Non-Specific  -- Poisonous Solid, n.o.s.)  For
    small  fires, use dry  chemical, carbon dioxide, water spray, or foam.  For
    large  fires, use water  spray, fog, or foam  (DOT 1984, Guide 53).

    Special Fire Fighting Procedures:  Not  Found

    Unusual Fire  and Explosion Hazards:  Not Found


SECTION  IV  -- REACTIVITY DATA

    Stability:   Unstable:   Not Found
                Stable:  Not Found

        Conditions to Avoid:   Not Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition  or Byproducts:  Not Found

    Hazardous Polymerization:  May Occur:   Not Found
                              May Not Occur:  Not  Found

        Conditions to Avoid:   Not Found


SECTION  V -- HEALTH HAZARD  DATA

    Routes of Entry:   Inhalation:  Yes (Farm Chemicals Handbook 1984,
                                 p. C52)
                      Skin:   Yes (Farm Chemicals Handbook 1984,  p.  C52)
                      Ingestion:   Not Found

-------
                                            CAS  Registry Number:  999-81-5
                                            Page 3 of 3
                       CHLORMEQUAT CHLORIDE


SECTION  V -- HEALTH HAZARD DATA (Continued)

    Health Hazards (Acute,  Delayed, and Chronic):  Inhalation of  spray and
    prolonged or  repeated contact with skin should  be avoided (Farm Chemicals
    Handbook 1984, p. C52).

    Signs and Symptoms of Exposure:  Not Found

    Medical  Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:   (Non-Specific -- Poisonous Solid,
    n.o.s.)   Move victim to fresh air; call emergency medical care.   Remove
    and isolate contaminated clothing and  shoes  at  the site.  In case of
    contact  with  material, immediately flush skin or eyes with running water
    for at least  15 minutes (DOT 1984, Guide 53).


SECTION  VI -- USE INFORMATION

    Plant  growth  regulator said to be effective  for cereal grains, tomatoes,
    and peppers (Hawley 1981, p. 302).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken in Case Material is Released  or  Spilled)

    (Non-Specific -- Poisonous Solid,  n.o.s.)  Keep unnecessary people away.
    Isolate  hazard area and deny entry. Wear  self-contained breathing
    apparatus and full protective clothing.  Stop leak if you can do it
    without  risk.  For small spills:   take up  with  sand or other
    noncombustible absorbent material and  place  into containers for later
    disposal.  Small dry spills:  with clean shovel, place in clean, dry
    container and cover, move from spill area.   For large spills:   dike  far
    ahead  of spill for later disposal (DOT 1984,  Guide 53).

-------
                                           CAS Registry Number:  1031-47-6
                                           Page  1  of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October  31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- TRIAMIPHOS

CAS Registry Number:   1031-47-6

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume 3, p. 118)  Phosphonic
Diamide,  p-(5-Amino-3-Phenyl-lH-l,2,4-Triazol-l-yl)-N,N,N',N'-Tetramethyl-;
5-Amino-l-bis(Dimethylamide)Phosphoryl-3-Phenyl-l,2,4-Triazole;
5-Amino-l-(bis(Dimethylamino)Phosphinyl)-3-Phenyl-l,2,4-Triazole;
5-Amino-l-bis(Dimethylamido)Phosphoryl-3-Phenyl-l,2,4-Triazole;  ENT 27,223;
5-Araino-3-Phenyl-l ^^-Triazole-l-yl-N.NjN1 ,N' -Tetramethylphosphodiamide;
5-Amino-3-Phenyl-l,2,4-Triazoly1-1-bis(Dimethylamido)Phosphate;
S-Amino-S-Phenyl-l^^-Triazolyl-NjN.N1 ,N* -Tetramethylphosphonamide;
bis(Dimethylamino)-3-Amino-5-Phenyltriazolyl Phosphine Oxide;
3-Phenyl-5-Amino-l,2,4-Triazolyl-(l)-(N,N1-Tetramethyl) Diamidophosphonate;
Triamphos;  Wepsin; Wepsyn; Wepsyn 155; WP  155

Chemical Formula:  C.-H.-N-OP
                    12  iy o

Molecular Weight:  294.34


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits  Recommended:   Toxicity  information:   LD5Q oral  (mouse)

    10 mg/kg  (*NIOSH/RTECS 1985)


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H  0=1):  Not Found

    Vapor  Pressure  (mmHg):  Not Found

    Melting Point:  Not  Found

    Vapor  Density (AIR=1): Not Found

    Evaporation Rate (Butyl acetate=l):   Not Found

-------
                                            CAS  Registry  Number:   1031-47-6
                                            Page 2 of 4
                            TRIAMIPHOS
SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS (Continued)

    Solubility  in Water:  Not Found

    Appearance and Odor:  Solid (Encyc Occupat Health and Safety 1983,  p.
    1622)


SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not  Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing  Methods:   Triamiphos  is  listed as an organophosphorus
    pesticide  (Encyc Occupat Health and  Safety  1983, p. 1622).  This material
    may burn,  but  does not ignite readily.   Extinguish with dry chemical,
    carbon dioxide, water spray, fog,  or foam (DOT  1984, Guide 55).

    Special  Fire Fighting  Procedures:  As for other organophosphorus
    pesticides, stay upwind; keep out  of low areas.  Move containers from fire
    area if you can do it without risk.   Fight  fire from maximum distance.
    Dike fire  control water for later  disposal; do not scatter the material
    (DOT 1984, Guide 55).

    Unusual Fire  and Explosion Hazards:  As for other organophosphorus
    pesticides, containers may explode in heat  of fire  (DOT 1984, Guide 55).
    Heat may cause decomposition and evolution  of highly toxic fumes of
    nitrogen oxides and phosphorus oxides (Sax  1984, p. 202).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it emits highly toxic fumes of nitrogen oxides and phosphorus oxides  (Sax
    1984,  p. 202).

-------
                                            CAS Registry Number:  1031-47-6
                                            Page 3 of 4
                             TRIAMIPHOS
SECTION IV -- REACTIVITY DATA  (Continued)

    Hazardous  Polymerization:  May Occur:   Not Found
                                May Not Occur:  Not  Found

        Conditions to Avoid:   Not  Found
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (Sax 1984, p. 202)
                       Skin:   Yes  (Sax 1984, p. 202)
                       Ingestion:  Yes (Sax 1984,  p. 202)

    Health Hazards  (Acute, Delayed,  and  Chronic):   Triamiphos is an organic
    phosphorus insecticide (Encyc Occupat Health and Safety 1983, p.  1622).
    Organic phosphorus  insecticides are absorbed by the skin,  as well  as by
    the respiratory and gastrointestinal tracts.  It is a cholinesterase
    inhibitor (Hayes 1982,  p.  301).

    Signs and Symptoms of Exposure:  Triamiphos is an  organic phosphorus
    insecticide  (Encyc  Occupat Health and Safety 1983,  p. 1622).  Symptoms are
    secondary to cholinesterase  inhibition:  headache,  giddiness, blurred
    vision,  nervousness, weakness, nausea, cramps, diarrhea,  and discomfort  in
    the chest.   Signs include  sweating, tearing, salivation,  vomiting,  bluing
    of the skin, loss of reflexes, loss of sphincter control,  convulsions, and
    coma (Hayes  1982, p. 302).

    Medical  Conditions  Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid Procedures:  Triamiphos is an organic
    phosphorus insecticide (Encyc Occupat Health and Safety 1983, p.  1622).
    Move victim  to  fresh air;  call emergency medical care.   If not breathing,
    give artificial respiration.  If breathing is difficult,  give oxygen.  In
    case of contact with material, immediately flush skin or eyes with running
    water for at least  15  minutes.  Speed in removing material from  skin is  of
    extreme importance.  Remove  and isolate contaminated clothing and  shoes  at
    the site.  Keep victim quiet and maintain normal body temperature.
    Effects may  be  delayed; keep victim under observation (DOT 1984, Guide 55).


SECTION  VI --  USE INFORMATION

    It is  used in the control  of powdery mildew on apples and ornamentals
    (Buchel 1983, p. 258).  Product discontinued by U.S. supplier  (Farm
    Chemicals Handbook  1984, p.  C244).

-------
                                            CAS Registry Number:  1031-47-6
                                            Page 4 of 4
                            TRIAMIPHOS
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or Spilled)

    Triamiphos is an organophosphorus pesticide (Encyc Occupat  Health  and
    Safety 1983,  p. 1622).  Stay upwind; keep out of low areas.   Ventilate
    closed spaces before entering them.  Wear positive pressure breathing
    apparatus  and special protective clothing.  Do not touch  spilled material;
    stop leak if  you can do so without risk.  Use water spray to reduce
    vapors,  Small  spills:  absorb with sand or other non-combustible
   . absorbent  material and place into containers for later disposal.   Small
    dry spills:   with clean shovel place material into clean  dry containers
    and cover; move containers from spill area.  Large spills:   dike far ahead
    of spill for  later disposal (DOT 1984, Guide 55).


COMMENTS

    Sources searched, no information found:
        Weast  1979
        Hawley 1981
        Verschueren 1983
        Gosselin  1984
        NFPA 1984
        Weiss  1980
        Clayton and Clayton 1981-82
        Merck  1983
        ACGIH  1983
        NIOSH/OSHA  1978

-------
                                           CAS Registry Number:  1066-45-1
                                           Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- TRIMETHYLTIN CHLORIDE

CAS Registry Number:   1066-45-1

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 3,  p.  627)   Stannane,
Chlorotrimethyl-; Chlorotrimethylstannane; Chlorotrimethyltin; M&T Chemicals
1222-45;  Trimethylchlorostannane; Trimethylchlorotin; Trimethylstannyl Chloride

Chemical  Formula:   C HgClSn

Molecular  Weight:  199.26


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Air:  TWA 100  yg (Sn)/m3 (NIOSH/RTECS  1983, Volume 3,
    p.  627)

    ACGIH TLV:   (Organic compounds as  Tin) TWA 100 yg (Sn)/m3  (skin);
    STEL  200  yg  (Sn)/m3 (skin)  (ACGIH 1985,  p.  31)

    IDLH:  Not Found

    Other Limits Recommended:   (Non-Specific  -- Tin Compounds,  Organic)
    IDLH  200  mg/m3 (NIOSH/OSHA  1978, p.  180).  Occupational exposure to
    organotin compounds recommended  standard -  Air:  TWA 0.1 rag  (Sn)/m3
    (NIOSH/RTECS 1983, Volume 3,  p.  627).  Toxicity information:   LDlo  oral
    (monkey,  hamster, gerbil) 3 mg/kg (-'-NIOSH/RTECS 1985).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H 0=1):  Not Found

    Vapor Pressure  (mmHg):   Not Found

    Melting Point:   99°F,  37°C  (Sax 1984, p.  782)

    Vapor Density (AIR=1):   Not  Found

-------
                                     CAS Registry Number:  1066-45-1
                                     Page 2 of 4
                      TRIMETHYLTIN CHLORIDE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:  Not Found

    Appearance  and Odor:  Not Found


SECTION  III  --  FIRE  AND  EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing Methods:  Not Found

    Special Fire Fighting Procedures:  Not Found

    Unusual Fire and  Explosion Hazards:  Not Found


SECTION  IV --  REACTIVITY DATA

    Stability:  Unstable:  Not  Found
                Stable: Not Found

        Conditions to  Avoid:   Decomposing heat (Sax 1984, p. 782)

    Incompatibility (Materials  to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:   When  heated to decomposition,
    it emits toxic fumes of chlorides (Sax 1984,  p.  782).

    Hazardous Polymerization:   May Occur:   Not Found
                              May Not  Occur:  Not Found

        Conditions to  Avoid:   Not Found


SECTION  V -- HEALTH HAZARD  DATA

    Routes of  Entry:   Inhalation:  Yes (Non-Specific -- Tin Compounds,
                                 Organic), (NIOSH/OSHA 1978, p.  181)
                      Skin:   Yes  (Non-Specific --  Tin Compounds, Organic)
                             (NIOSH/OSHA 1978,  p.  181)
                      Ingestion:   Yes (Non-Specific  -- Tin Compounds,
                                 Organic) (NIOSH/OSHA 1978, p.  181)

-------
                                      CAS  Registry Number:  1066-45-1
                                      Page 3 of 4
                      TRIMETHYLTIN CHLORIDE
SECTION  V --  HEALTH HAZARD DATA (Continued)

    Health Hazards (Acute,  Delayed, and Chronic):  (Non-Specific  -- Tin
    Compounds,  Organic)  The material  is  an  irritant to the skin and
    gastrointestinal tract.  Contact may  specifically damage the following
    target organs:  central nervous system,  eyes, liver, urinary tract,  and
    skin (NIOSH/OSHA 1978, p. 180).

    Signs and Symptoms of Exposure:   (Non-Specific  -- Tin Compounds,
    Organic)  Inhalation causes headache,  lethargy, and irritated eyes.
    Symptoms  of ingestion include throat  irritation, coughing, and abdominal
    pain.   Skin contact results in burns  and sores  (NIOSH/OSHA 1978,  p.  180).

    Medical Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency  and First Aid Procedures:   (Non-Specific -- Tin Compounds,
    Organic)  In case of skin or eye contact wash immediately with large
    amounts of  water.  If ingested, dilute with water and induce vomiting.  If
    breathing is interrupted, apply artificial  respiration or oxygen
    (NIOSH/OSHA 1978, p. 180).


SECTION  VI  --  USE INFORMATION

    Not Found
SECTION  VII -- PRECAUTIONS FOR SAFE  HANDLING  AND  USE
(Steps to  be Taken in Case Material is  Released or Spilled)

    Wear protective clothing and eye protection (see Section V above).
    Respirator protection is recommended based on exposure limits (NIOSH/OSHA
    1978,  p. 181).

-------
                                      CAS  Registry Number:  1066-45-1
                                      Page 4 of 4
                      TRIMETHYLTIN CHLORIDE
COMMENTS
    Sources  searched but no information  found:
        Hawley  1981
        Weast 1979
        Merck 1983
        DOT  1984
        NFPA 1984
        Student 1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton and Clayton 1981-82
        Arena 1979
        Gosselin 1984
        Encyc Occupat Health and Safety  1983
        Buchel  1983
        Farm Chemicals Handbook 1984
        Hayes 1982

-------
                                     CAS Registry Number:  1122-60-7
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- NITROCYCLOHEXANE

CAS Registry  Number:  1122-60-7

Synonyms:  (SANSS 1983  Synonyms)  Cyclohexane,  Nitro-

Chemical Formula:   C,H,,NO.
                    o  11  /
Molecular  Weight:  129.16


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found
    Other Limits Recommended:  Toxicity information:  LC,   inhalation

    (mouse) 0.01 mg/liter/2  hours

    4 hours   0-NIOSH/RTECS 1985)
(mouse) 0.01 mg/liter/2  hours; LC,.  inhalation  (rat) 0.15 mg/liter/
SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  401.9°F, 205.5°C at  768 mmHg (Weast 1979, p. C-262)

    Specific Gravity  (H 0=1):  1.0610 at 20°C/4°C (Weast 1979,  p. C-262)

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   -29°F, -34°C (Weast  1979, p. C-262)

    Vapor Density (AIR=l):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Insoluble  (Weast 1979,  p.  C-262)

    Appearance and Odor:   Colorless liquid (Beilstein  1954, B5  p.  10)

-------
                                      CAS  Registry Number:  1122-60-7
                                      Page 2 of 3
                         NITROCYCLOHEXANE
SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing Methods:   (Non-Specific -- Poisonous Liquid,  n.o.s.)
    Small  fires:   dry chemical, carbon dioxide, water spray, or foam.   Large
    fires:   water spray, fog, or foam (DOT 1984, Guide 55).

    Special  Fire Fighting  Procedures:   (Non-Specific -- Poisonous Liquid,
    n.o.s.)   Move container from fire area if you can do it without  risk.
    Keep unnecessary people away;  isolate hazard area and deny entry.   Stay
    upwind;  keep  out of low areas.  Wear positive pressure breathing apparatus
    and special  protective clothing  (DOT 1984,  Guide 55).

    Unusual  Fire and Explosion Hazards:   Not  Found
SECTION  IV  --  REACTIVITY  DATA

    Stability:  Unstable:  Not Found
                Stable:  Not  Found

        Conditions to Avoid:  Not Found

  •  Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:  May Occur:   Not Found
                               May Not Occur:   Not  Found

        Conditions to Avoid:  Not Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Not  Found
                      Skin:  Not Found
                      Ingestion:   Not  Found

    Health Hazards  (Acute,  Delayed, and Chronic):  Not  Found

    Signs  and Symptoms of  Exposure:   Not  Found

    Medical Conditions Generally Aggravated by  Exposure:  Not Found

-------
                                      CAS Registry Number:  1122-60-7
                                      Page 3 of 3
                          NITROCYCLOHEXANE
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Emergency and First Aid Procedures:   (Non-Specific  --  Poisonous Liquid,
    n.o.s.)  Move victim to  fresh air; call emergency medical care.  If not
    breathing, give  artificial respiration.  If breathing is difficult, give
    oxygen.  Remove  and  isolate contaminated clothing and shoes at the site.
    In case of contact with  material, immediately flush skin or eyes with
    running water for at least 15 minutes.   Speed in removing material from
    skin is of extreme importance.  Keep victim quiet and maintain normal body
    temperature.   Effects may be delayed;  keep victim under  observation (DOT
    1984,  Guide 55).
SECTION  VI  --  USE  INFORMATION

    Not Found


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be  Taken  in Case Material is Released or Spilled)

    (Non-Specific --  Poisonous Liquid, n.o.s.)   Wear positive pressure
    breathing apparatus and special protective  clothing.  Do not touch spilled
    material;  stop  leak if you can do so without risk.  Use water spray to
    reduce vapors.  Absorb small spills with sand or other noncombustible
    absorbent materials.  Large spills:  dike far ahead of spill for later
    disposal  (DOT 1984, Guide 55).


COMMENTS:

    Sources searched  but no information found:
        ACGIH 1983
        NIOSH/OSHA  1978
        Hawley 1981
        Merck 1983
        NFPA  1984
        Student  1981
        Weiss  1980
        CHRIS  1978
        Doull  1980
        Clayton  and Clayton 1981-82
        Arena 1979
        Gosselin 1984
        Encyc  Occupat Health and Safety 1983
        Buchel 1983
        Farm  Chemicals Handbook 1984
        Hayes  1982
        Physicians' Desk Reference 1985
        Gilman 1985

-------
                                    CAS Registry Number:  1124-33-0
                                    Page 1 of 3
                      EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October 31,  1985
                                                  Revision:
CHEMICAL  IDENTITY -- PYRIDINE, 4-NITRO-,  1-OXIDE

CAS Registry Number:  1124-33-0

Synonyms:   (NIOSH/RTECS 1983 Synonyms,  Volume 3,  p. 427)  4-Nitro-
Pyridine-N-Oxide

Chemical Formula:  CCH.N_00
                   5423
Molecular Weight:  140.11


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  LD,    oral  (rat)
    8 mg/kg  (*NIOSH/RTECS 1985)


SECTION II  --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:  Not Found

    Specific Gravity  (H20=l):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:  Not Found

-------
                                           CAS Registry Number:   1124-33-0
                                           Page 2 of 3
                  PYRIDINE, 4-NITRO-, 1-OXIDE


SECTION  III  --  FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        DEL:  Not Found

    Extinguishing  Methods:  Not Found

    Special Fire  Fighting  Procedures:  Not Found

    Unusual Fire and Explosion Hazards:  When heated to decomposition, it
    emits  very toxic fumes of  nitrogen oxides (Sax 1984,  p.  2040).


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not  Found
                Stable:  Not Found '

        Conditions to Avoid:  Decomposing heat (Sax 1984, p.  2040)

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated to  decomposition,
    it emits  very toxic fumes  of nitrogen oxides (Sax 1984, p. 2040).

    Hazardous Polymerization:   May Occur:   Not Found
                              May Not Occur:  Not Found

        Conditions to Avoid:  Not  Found


SECTION  V -- HEALTH HAZARD  DATA

    Routes of Entry:   Inhalation:  Not Found
                      Skin:  Not  Found
                      Ingestion:  Yes (Sax 1984,  p.  2040)

    Health Hazards (Acute,  Delayed,  and Chronic):  High  toxicity via oral
    exposure  (Sax  1984, p. 2040).

    Signs  and Symptoms of  Exposure:   Not  Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid Procedures:  Not Found

-------
                                           CAS Registry Number:  1124-33-0
                                           Page 3 of 3
                  PYRIDINE, 4-NITRO-,  1-OXIDE


SECTION VI -- USE INFORMATION

    Not  Found


SECTION VII -- PRECAUTIONS FOR SAFE HANDLING  AND  USE
(Steps to be Taken in Case Material is Released  or Spilled)

    Not  Found


COMMENTS:

    Sources searched but no information found:
        Hawley  1981
        Hayes 1982
        Merck 1983
        Gilman  1985
        Gosselin 1984
        Weiss 1980
        Student 1981
        Encyc Occupat Health and Safety 1983
        Buchel  1983
        Clayton and Clayton 1981-82
        Farm Chemicals Handbook 1984
        DOT 1984
        CHRIS 1978
        Verschueren 1983

-------
                                           CAS Registry Number:   1129-41-5
                                           Page 1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- METOLCARB

CAS Registry Number:   1129-41-5

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 1,  p.  840)   Carbamic Acid,
Methyl-,  m-Tolyl-Ester; Carbamic Acid, Methyl-, 3-Tolyl  Ester; m-Cresyl
Methylcarbamate; m-Cresyl ester  of N-Methylcarbamic Acid;  Dicresyl; DRC 3341;
Kumiai; Metacrate; 3-Methylphenyl N-Methylcarbamate;  MTMC; m-Tolyl
N-Methylcarbamate; 3-Tolyl-N-Methylcarbamate; Tsumacide; Carbamic Acid,
Methyl-,  3-Methylphenyl Ester

Chemical  Formula:   C H  NO

Molecular  Weight:  165.21


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not  Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  LC-. inhalation
    (rat)  0.475 mg/liter (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H 0=1):  Not Found

    Vapor Pressure  (mmHg):   1 x 10   at 25°C (Farm Chemicals Handbook
    1984,  p.  C236)

    Melting Point:   169-171°F, 76-77°C (Farm Chemicals Handbook,  1984,  p.
    C236)

    Vapor Density (AIR=1):   Not  Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

-------
                                            CAS Registry Number:   1129-41-5
                                            Page 2 of 4
                            METOLCARB
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Solubility  in Water:  2.6 g/liter at 30°C (Farm Chemicals  Handbook 1984,
    p.  C236)

    Appearance and Odor:  Colorless crystalline solid (Farm Chemicals
    Handbook  1984,  p. C236)
SECTION "III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:  Not Flammable (Farm Chemicals  Handbook  1984, p. C236)
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Metolcarb is a carbamate insecticide (Buchel
    1983,  p.  131).   Solid carbamate pesticides may burn but  do not  ignite
    readily.   For small fires, use dry chemical,  carbon dioxide, water spray,
    and foam.   For  large fires, use water spray,  fog  or foam.  Dike fire
    control water for  later disposal (DOT 1984, Guide 55).

    Special Fire Fighting  Procedures:  Procedures  for carbamate pesticides,
    solid,  include  the following.  Stay upwind and keep out  of low  areas.
    Wear positive pressure breathing apparatus and special protective
    clothing.   Move  container from fire area if you can do it  without risk.
    Fight  fire from  maximum distance.  Dike fire control water for  later
    disposal;  do not scatter the material (DOT 1984,  Guide 55).

    Unusual Fire and Explosion Hazards:  As  for other solid carbamate
    pesticides, container may explode in heat of fire.  Fire and runoff from
    fire control water may produce irritating or poisonous gases (DOT 1984,
    Guide  55).
SECTION  IV  --  REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Decomposing heat (Sax 1984, p.  1823)

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:   Emits toxic fumes  of nitrogen
    oxides when  heated  to decomposition (Sax 1984,  p.  1823).

-------
                                            CAS Registry Number:  1129-41-5
                                            Page 3 of 4
                            METOLCARB
SECTION  IV --  REACTIVITY DATA (Continued)

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Sax 1984,  p.  1823)
                      Skin:  Yes  (Sax 1984, p. 1823)
                      Ingestion:   Yes (Sax 1984,  p.  1823)

    Health Hazards (Acute, Delayed,  and  Chronic):  High oral and skin
    toxicity,  and  moderate inhalation toxicity (Sax 1984,  p.  1823).
    (Non-Specific  -- Carbamates)  Some carbamates  appear  to be  carcinogenic,
    teratogenic, and/or mutagenic (Sax 1984, p. 631).   Carbamates  are
    cholinesterase inhibitors (Hayes 1982, p.  436).

    Signs and Symptoms of Exposure:  Metolcarb  is a carbamate insecticide
    (Buchel 1983,  p. 131).  Signs and symptoms of  poisoning by  carbamates are
    similar to those for organic phosphorus compounds (Hayes  1982, p. 437).
    Symptoms of poisoning by organic phosphorus compounds  include  headache,
    giddiness, nervousness, blurred vision, weakness,  nausea, cramps,
    diarrhea,  and  discomfort in the chest.  Signs  include  sweating, myosis,
    tearing,  salivation and other excessive respiratory tract secretion,
    vomiting,  cyanosis, uncontrollable muscle twitches followed by muscular
    weakness,  convulsions, coma, loss of reflexes, and loss of  muscular
    control (Hayes 1982, p. 301).

    Medical  Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid Procedures:  Procedures for  carbamate
    .pesticides, solid, are as follows.  Move victim to fresh air and call
    emergency care.  If not breathing, give artificial respiration.  If
    breathing is difficult, provide oxygen.  Remove and isolate contaminated
    clothing and shoes at the site.  In case of contact,  immediately flush
    skin or eyes with water for 15 minutes.  Speed in removing  material  from
    skin is of extreme importance.  Keep victim quiet and  maintain normal body
    temperature.   Carefully observe victim since effects may be delayed  (DOT
    1984,  Guide 55).

-------
                                            CAS Registry Number:  1129-41-5
                                            Page 4 of 4
                            METOLCARB
SECTION  VI  --  USE  INFORMATION

    Metolcarb is an insecticide  for the control of rice leafhoppers,
    planthoppers,  codling moth,  citrus mealybug, onion thrips,  fruit  flies,
    bollworms and aphids  (Farm Chemicals Handbook 1984, p.  C236).   Not
    registered as a pesticide in the U.S. (USEPA/Pesticide Index 1985).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to  be  Taken in Case Material is Released or Spilled)

    Avoid  inhalation (see Section V above).   For solid carbamate pesticides,
    use the following procedures.  Wear positive pressure breathing apparatus
    and special  protective clothing.  For small spills, take up with  sand  or
    other  noncombustible absorbent material and place in containers for  later
    disposal.   For small dry spills, with clean shovel place material into
    clean, dry container and cover; move container from spill area.  For large
    spills, dike far ahead of spill for later disposal.  Do  not touch spilled
    material.   Use water spray to reduce vapors (DOT 1984,  Guide 55).

-------
                                           CAS Registry Number:   1303-28-2
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- ARSENIC PENTOXIDE

CAS Registry Number:   1303-28-2

Synonyms:  Arsenic  (V)  Oxide; Arsenic Acid; Arsenic Acid Anhydride; Arsenic
Anhydride;  Arsenic Oxide; Arsenic Pentaoxide; Diarsenic  Pentoxide;
Orthoarsenic  Acid (Weiss 1980, p. 126); Zotox

Chemical Formula:   As  0

Molecular Weight:  229.84


SECTION  I --HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Air TWA 0.01 mg/m3  (arsenic content)  (*NIOSH/RTECS 1985)

    ACGIH TLV:  0.2 mg/m3  (arsenic content)  (*ACGIH 1983)

    IDLH:  Not Found

    Other Limits Recommended:   NIOSH recommendation  for occupational
    exposure  to inorganic arsenic --  ceiling 0.002 mg/m3/15 minutes, Air.
    Toxicity  information:  LD_Q oral  (rat) 8 mg/kg (*NIOSH/RTECS  1985).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H 0=1):  4.32 (*Clayton and Clayton 1981-82)

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   599°F,  315°C  (Hawley 1981,  p.  89)

    Vapor Density (AIR=1):   Not  Found

    Evaporation Rate  (Butyl  acetate=l):   Not Found

    Solubility in Water:  Freely soluble (*Merck 1983)

-------
                                           CAS Registry Number:   1303-28-2
                                           Page 2 of 3
                        ARSENIC  PENTOXIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Appearance and  Odor:  White (*Hawley 1977), amorphous  lumps or powder
    (*Merck 1983).  Odorless (Weiss  1980, p. 126)
SECTION  III  --  FIRE AND EXPLOSION  HAZARD  DATA

    Flash  Point  (Method Used):   Not  flammable (Weiss 1980, p.  126)
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing Methods:   For small  fires, use dry chemical, carbon
    dioxide,  water spray, or foam.   For large fires, use water spray, fog, or
    foam (*DOT 1984).

    Special Fire  Fighting  Procedures:   Isolate hazard area and deny entry.
    Stay upwind;  keep out of low areas.  Wear self-contained (positive
    pressure  if  available) breathing apparatus and full protective clothing
    (*DOT  1984).

    Unusual Fire and Explosion  Hazards:  Fire may produce irritating or
    poisonous gases  (-DOT 1984).


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:
                 Stable:  Yes  (*CHRIS 1978)

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):  Will corrode metal and may give
    off toxic arsine gas (Weiss  1980, p. 126)

    Hazardous Decomposition or  Byproducts:  Reacts with metal and may give
    off toxic arsine gas (Weiss  1980, p. 126).

    Hazardous Polymerization:  May  Occur:
                               May Not Occur:   Yes  (Weiss 1980,  p.  126)

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  1303-28-2
                                            Page 3 of 3
                         ARSENIC PENTOXIDE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes  ('••DOT 1984)
                       Skin:   Yes  (*IARC  1972-85)
                       Ingestion:   Yes  (*Gosselin 1976)

    Health Hazards  (Acute, Delayed, and Chronic):   This  material  is
    extremely toxic; the probable  oral  lethal dose for humans is 5-50 mg/kg,
    or between 7 drops  and 1  teaspoonful  for a 150-lb. person (*Gosselin
    1976).  It is irritating  to  eyes, nose, and throat (Weiss 1980, p.  126).
    Chronic exposure may cause nerve damage to the extremities, alter cellular
    composition of the  blood,  and  cause structural changes in blood components
    (^Goodman 1980). There is sufficient evidence that inorganic arsenic
    compounds are skin  and lung  carcinogens in humans  (*IARC 1972-85).

    Signs and  Symptoms of Exposure:   Symptoms usually  appear  1/2 to 1 hour
    after ingestion, but may  be  delayed.  Symptoms include a sweetish,
    metallic taste and  garlicky  odor of breath; difficulty in swallowing;
    abdominal pain;  vomiting  and diarrhea; dehydration; feeble heart beat;
    dizziness and headache; and  eventually coma, sometimes convulsions,
    general paralysis,  and death (*Gosselin 1984).

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air and  call
    emergency medical care.   Remove contaminated clothing and shoes.   In case
    of contact with  material,  immediately flush skin or eyes with running
    water for at least  15 minutes  (*DOT 1984).  In case of ingestion, induce
    vomiting; give plenty of  lime  water, milk, or raw egg (Weiss 1980, p.  126).


SECTION  VI -- USE INFORMATION

    This material is used as  a chemical intermediate, as a herbicide, and as
    an ingredient in wood preservatives and in glass.  Other possible uses  are
    as an insecticide and soil sterilant  (*SRI).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING  AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    Avoid breathing  dust (see Section V above).  Stay upwind; keep out of low
    areas.  Wear self-contained  (positive pressure if available) breathing
    apparatus and full  protective  clothing.  Do not touch spilled material.
    Absorb small spills with  sand  or other noncombustible absorbent material
    and place into containers for  later disposal.  For small dry spills, use
    clean shovel to  place material in clean, dry container.  For large spills,
    dike far ahead of spill for  later disposal (*DOT 1984).

-------
                                      CAS  Registry Number:  1306-19-0
                                      Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October  31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- CADMIUM OXIDE

CAS Registry Number:   1306-19-0

Synonyms:  Cadmium Fume; Cadmium Monoxide; Cadmium  Oxide Fume; NCI-C02551

Chemical Formula:  CdO

Molecular  Weight:   128.40


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Air:  TWA 200 ug/m3  (cadmium); Ceiling 600 ug/m3;
    TWA 110 vg/m3,  as cadmium oxide fume  (*NIOSH/RTECS 1985)

    ACGIH TLV:   0.05  mg/m3  (dust and cadmium oxide exposure); STEL 0.2
    mg/m3  (dusts);  Ceiling 0.05 mg/m3  (cadmium oxide fume)  (*ACGIH  1980)

    IDLH:  40 yg  (cadmium)/m3 (NIOSH/OSHA  1978, p. 58)

    Other Limits  Recommended:   NIOSH  recommended exposure standard -- Air:
    TWA 40 vg/m3,  as cadmium oxide fume;  Ceiling 200 yg/m3/15 minutes
    ("NIOSH/RTECS  1985)


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H.0=l):   Crystalline form:  8.15  (*Weast  1979);

    Amorphous  form:  6.95 (Weast 1979,  p. B-103)

    Vapor Pressure (mmHg):   1 at 1000°C  (*Sax  1975)

    Melting Point:  Greater  than 2732°F, greater than 1500°C (Weast 1979,
    p.  B-103)

    Vapor Density  (AIR=1):   Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

-------
                                      CAS  Registry  Number:   1306-19-0
                                      Page 2 of 4
                          CADMIUM OXIDE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility  in Water:  Insoluble (*Weast  1979)

    Appearance and Odor:  Brown crystals  or brown amorphous powder (*Weast
    1979)


SECTION  III  -- FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):   Not  Found
    Flammable Limits:  (Non-Specific -- Cadmium Compounds)  This material
    may burn but does not ignite readily (DOT 1984, Guide 53).
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing  Methods:   (Non-Specific  -- Cadmium Compounds)  Extinguish
    with dry chemical, carbon dioxide,  water fog, spray, or foam (DOT 1984,
    Guide  53).

    Special Fire Fighting  Procedures:   (Non-Specific -- Cadmium Compounds)
    Wear self-contained breathing apparatus and full protective clothing.
    Move container  from fire if you  can do  so without risk (DOT 1984, Guide
    53).

    Unusual Fire  and Explosion Hazards:  When  heated to  decomposition, it
    emits  toxic fumes of cadmium (Sax  1984, p.  613).  (Non-Specific -- Cadmium
    Compounds)  Fire may produce irritating or  poisonous gases.  Runoff from
    fire control or dilution water may  cause pollution  (DOT 1984, Guide 53).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:   Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials  to Avoid):  Oxides of cadmium react
    explosively with magnesium  when  heated  (*NFPA 1978).

    Hazardous Decomposition or Byproducts:  Toxic fumes may form in a fire
    (*CHRIS  1978).  When heated to decomposition, it emits toxic fumes of
    cadmium  (Sax 1984, p.  613).

    Hazardous Polymerization:  May  Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                       CAS  Registry Number:   1306-19-0
                                       Page 3 of 4
                           CADMIUM OXIDE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes  (-IARC  1972-1985)
                       Skin:   Not  Found
                       Ingestion:   Yes  (Sax 1984, p. 613)

    Health Hazards  (Acute, Delayed, and Chronic):  The lethal inhalation
    dose of cadmium  oxide in  humans is  2,500 mg/m3  for a  1 minute exposure
    (*IARC 1972-1985).   Lethal exposure has been  established at 50 mg
    (cadmium)/m3  for 1  hour for cadmium oxide  dust  and i/2 hour for the fume
    (*Casarett 1975).   These  concentrations may be  inhaled without sufficient
    discomfort to warn  worker of exposure  ("Sax 1984, p. 612).  Inhalation may
    cause acute tracheobronchitis,  pneumonitis, and pulmonary edema.  Exposure
    can cause  kidney and lung damage (*Encyc Occupat Health and Safety 1981).
    Acute exposure by inhalation may cause death  by anoxia.  The lowest human
    toxic inhalation concentration  is 8630 yg/m3/5 hours for the fume
    (*NIOSH/RTECS 1985).

    Signs.and  Symptoms  of Exposure:   Symptoms  for cadmium poisoning  include
    metallic taste in the mouth, headache, shortness of breathe, chest pain,
    cough with foamy or bloody sputum, pulmonary  rales, weakness, leg pains
    and pulmonary edema (Gosselin  1984, pp. 111-81-82).

    Medical  Conditions  Generally Aggravated by Exposure:  Persons with
    respiratory disorders should be excluded from contact with this material
    (*Encyc Occupat  Health and Safety 1971).

    Emergency and  First Aid Procedures:  (Non-Specific -- Cadmium
    Compound)   Move  victim to fresh air; remove and isolate contaminated
    clothing and shoes.  Flush exposed  skin or eyes with running water for at
    least 15 minutes (DOT 1984,  Guide 53).


SECTION  VI -- USE INFORMATION

    Cadmium oxide is used as  an electroplating chemical and in the manufacture
    of cadmium electrodes.   It is  a component of  silver alloys, phosphorus,
    semiconductors,  glass and ceramic glazes (*SRI).  It was formerly used by
    veterinarians to kill worms and parasites  (*Merck 1976).

-------
                                      CAS Registry Number:  1306-19-0
                                      Page 4  of 4
                          CADMIUM OXIDE
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to  be Taken in  Case Material is Released or Spilled)

    If dust is released  in a hazardous concentration:  (1) remove all ignition
    sources; (2)  ventilate area of release; and (3) collect  released material
    and place in  sealed  containers in secured sanitary landfill (*NIOSH/OSHA
    1981).   (Non-Specific -- Cadmium Compounds)  Keep unnecessary people away;
    isolate hazard area  and deny entry.  Stay upwind, keep out of low areas.
    Wear self-contained  positive pressure breathing apparatus and full
    protective clothing.  If pollution of water occurs,  notify proper
    authorities.   Do not touch spilled material; stop leak if you can do so
    without risk.   Absorb small spills with sand or other noncombustible
    absorbent material and place into containers for later disposal.   For
    small  dry spill with clean shovel place material into clean,  dry container
    and cover;  move container from spill area.  Dike large spills far ahead
    for later disposal (DOT 1984, Guide 53).

-------
                                     CAS Registry Number:  1314-32-5
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- THALLIC OXIDE

CAS Registry Number:   1314-32-5

Synonyms:  Dithallium Trioxide; Thallium Oxide (Tl 203);  Thallium Peroxide;
Thallium Sesquioxide; Thallium(3+) Oxide; Thallium(III) Oxide

Chemical Formula:   °3T12

Molecular Weight:  456.78


SECTION I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD.   oral  (guinea
    pig) 6 mg/kg (*NIOSH/RTECS  1985)


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   1607°F, 875°C (loses  two oxygens) (*Weast  1979)

    Specific Gravity (H20=l):  9.65 (*Merck  1976)

    Vapor Pressure  (mmHg):   Not Found

    Melting Point:   1323°F,  717°C (*Merck 1976)

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate (Butyl  acetate=l):  Not Found

    Solubility in Water:  Insoluble  (*Merck 1976)

    Appearance and Odor:  Colorless to brown powder (*Weast 1979; *Merck
    1976)

-------
                                      CAS Registry Number:  1314-32-5
                                      Page 2 of 3
                          THALLIC OXIDE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  (Non-Specific -- Thallium Salts, n.o.s.)  Small
    fires:   dry chemical, carbon dioxide, water spray, or foam.   Large fires:
    water  spray,  fog, or  foam  (DOT 1984, Guide 53)

    Special  Fire Fighting Procedures:  (Non-Specific -- Thallium  Salts,
    n.o.s.)   Move container  from fire area if you can do so without  risk  (DOT
    1984,  Guide 53).

    Unusual Fire and Explosion Hazards:  When heated to decomposition,
    emits  toxic fumes of  thallium (Sax 1984, p.  2555).  (Non-Specific --
    Thallium Salts, n.o.s.)  Fire may cause irritating or poisonous  gases (DOT
    1984,  Guide 53).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:  Not  Found
                 Stable:  Not Found

        Conditions to Avoid:   A mixture of thallic oxide and antimony
        sulfide or sulfur explodes when ground in a mortar (*NFPA 1978).

    Incompatibility (Materials  to Avoid):  Decomposed by hydrogen  chloride
    with evolution of chlorine ("Merck 1976).  Dry hydrogen sulfide  ignites
    and sometimes  feebly  explodes, over thallium oxide ('vBretherick  1979).

    Hazardous  Decomposition or Byproducts:  When heated to decomposition,
    toxic  fumes  of thallium  are emitted (Sax 1984, p.  2555).

    Hazardous  Polymerization:  May Occur:   Not Found
                               May  Not Occur:  Not Found

        Conditions to Avoid:   Not Found

-------
                                      CAS Registry Number:  1314-32-5
                                      Page 3 of 3
                          THALLIC OXIDE
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (-Rurnack 1975 to Present)
                      Skin:   Yes  (*Rumack  1975 to Present)
                      Ingestion:  Yes (*Rumack 1975 to Present)

    Health Hazards  (Acute, Delayed,  and  Chronic):   It  attacks the retinal
    ganglion cells,  nerve  fibers and optic nerves ("Grant 1974).  It causes
    degeneration of  the  central nervous system.  Death has been reported as  a
    result of long-term  systemic thallium intake (*Doull 1980).

    Signs and Symptoms of Exposure:  Similar to other  thallium compounds.
    When large doses are taken,  first symptoms are hemorrhage of the
    gastrointestinal tract, stomach cramps, rapid heartbeat and headaches
    which usually occur  within the first 12 hours.   Other symptoms  include
    abdominal pain,  vomiting, constipation, and diarrhea.  When smaller doses
    are taken the predominant symptoms are tingling sensations and
    unsteadiness.  The tingling  is usually more severe in the lower
    extremities  and  may  progress to weakness and muscular atrophy (*Clayton
    and Clayton 1981-82).

    Medical  Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:   (Non-Specific -- Thallium Salts,
    n.o.s.)   Move victim to fresh air; call emergency medical care.   Remove
    and isolate contaminated clothing and shoes at the site.  In case of
    contact  with material, immediately flush skin or eyes with running water
    for at least 15  minutes (DOT 1984, Guide 53).
SECTION  VI  --  USE  INFORMATION

    Not Found


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to  be  Taken in Case Material is Released or Spilled)

    Do not breathe dust.  Wear proper respiratory protection and protective
    clothing.   In case of contact, immediately flush skin or eyes with water
    (see Section V above).   (Non-Specific -- Thallium Salts, n.o.s.)  Do not
    touch  spilled materials; stop  leak if you can do so without risk.   Small
    spills:   absorb with sand or other noncombustible absorbent material and
    place  into containers for later disposal.  Small dry spills:  with clean
    shovel, place material into clean, dry container and cover; move
    containers from spill area.  Large spills:  dike far ahead of spill for
    later  disposal (DOT 1984, Guide 53).

-------
                                            CAS Registry Number:  1314-56-3
                                            Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- PHOSPHORUS PENTOXIDE

CAS Registry Number:   1314-56-3

Synonyms:  Diphosphorus Pentaoxide; Diphosphorus  Pentoxide; Phosphoric Acid
Anhydride;  Phosphoric Acid, Anhydrous;  Phosphoric Anhydride; Phosphoric Oxide;
Phosphoric Pentoxide; Phosphorus Oxide;  Phosphorus Pentaoxide;
Phosphorus(V)Oxide; Phosphorus, Oxide,  Pent-

Chemical Formula:  P 0

Molecular  Weight:   141.96


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:   Not  Found

    IDLH:  Not Found

    Other Limits  Recommended:   Hygienic standard recommended  in AIHA Guide
    is 1 mg (phosphorus pentoxide)/m3  of air  (^Clayton and Clayton
    1981-82).  Toxicity information:   LC,-n  inhalation (guinea pig)  0.061
    mg/liter/1 hour (*NIOSH/RTECS 1985).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Sublimes at 572°F, 300°C (Weast 1983, p. B-119)

    Specific Gravity (H20=l):   2.39 (*Weast 1979)

    Vapor Pressure (mmHg):  1 at 384°C  (Weast 1983, p.  D-i.97)

    Melting Point:  Sublimes  (Weast 1983, p. D-197)

    Vapor Density  (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:   White powdery crystals  (*Weast 1979)

-------
                                      CAS Registry  Number:   1314-56-3
                                      Page 2 of 4
                        PHOSPHORUS  PENTOXIDE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  Not Flammable (Merck 1983, p.  1061)
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Does not support combustion (Merck 1983,  p.
    1061).   Do not get water  inside container.  For small fires, use dry
    chemical or carbon dioxide.  For  large fires, flood fire area with water
    from a distance.  Do  not  get solid  stream of water on spilled material.
    Spray  cooling water on  containers that are exposed to flames until well
    after  fire is out  (DOT  1984, Guide  39).

    Special  Fire Fighting Procedures:   Wear positive pressure breathing
    apparatus and special protective  clothing.  Keep combustibles away from
    spilled material  (DOT 1984, Guide 39).

    Unusual  Fire and Explosion Hazards:   Reacts violently with water to
    evolve heat (Hawley 1981, p. 809).  Flammable poisonous gases may
    accumulate in tanks and hopper cars (DOT 1984 Guide 39).   Phosphorus
    pentoxide reacts violently with the following:   ammonia,  hydrofluoric
    acid,  oxygen difluoride,  potassium, sodium, propargyl alcohol, calcium
    oxide,  sodium hydroxide and chlorine trifluoride.  A violent explosion
    occurs  if a solution  of perchloric  acid in chloroform is  poured over
    phosphorus pentoxide  (-NFPA 1978).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (*Hawley 1977)

        Conditions  to Avoid:  Readily  absorbs moisture from air to form
        meta-,  pryo-, or  orthophosphoric acid (*Hawley 1977).

    Incompatibility  (Materials to Avoid):  Formic acid, hydrogen fluoride,
    inorganic bases, metals, oxidants, water (Sax 1984, p. 2224).   Phosphorus
    pentoxide reacts violently with the following:  ammonia, hydrofluoric
    acid,  oxygen difluoride, potassium, sodium, propargyl alcohol, calcium
    oxide,  sodium hydroxide and chlorine trifluoride.  A violent explosion
    occurs  if a  solution  of perchloric acid in chloroform is poured over
    phosphorus  pentoxide  (*NFPA 1978).

    Hazardous Decomposition or Byproducts:  Not Found

-------
                                      CAS Registry Number:  1314-56-3
                                      Page 3 of 4
                        PHOSPHORUS  PENTOXIDE
SECTION  IV -- REACTIVITY DATA  (Continued)

    Hazardous  Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:   Not  Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (*Rumack 1975 to Present)
                      Skin:   Yes  (*Rumack 1975 to Present)
                      Ingestion:  Yes (-Rumack 1975 to Present)

    Health Hazards  (Acute, Delayed,  and  Chronic):   Powder  and fumes in the
    air are irritating to  eyes and the respiratory tract ("Grant  1974).
    Particles  in contact with  eye react vigorously and even a small  amount may
    cause  permanent  burns.  Contact with the skin will cause severe  burns.
    Ingestion  will damage  the  gastrointestinal tract (*Rumack 1975 to
    Present).   Corrosive to skin, mucous membranes and eyes (Merck 1983, p.
    1061).

    Signs and Symptoms of Exposure:  Ingestion may produce mild to
    moderately severe oral and stomach burns.  Stomach perforations  may also
    occur.  Severe irritation  may produce spontaneous vomiting.   Skin  contact
    may produce severe burns.  Extensive burns may lead to fluid  loss  and
    shock.  Inhalation may produce chest pain and respiratory distress.  Eye
    contact is painful and may cause blindness (*Rumack 1975 to Present).

    Medical Conditions Generally Aggravated  by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air.   If not
    breathing, give  artificial respiration.  If breathing is difficult, give
    oxygen. Remove  and  isolate  contaminated shoes and clothing.  In case of
    contact with material, immediately flush skin or eyes for at  least 15
    minutes with running water.  Keep victim quiet and maintain normal body
    temperatures (DOT 1984, Guide 39).  If ingested, dilute stomach  contents
    by having  patient drink 1-2  large glasses of water or milk.   Follow
    dilution with milk,  cornstarch, and water (*Rumack 1975 to Present).


SECTION  VI --  USE INFORMATION

    Drying and dehydrating agent; condensing agent in organic synthesis
    (*Merck 1976).   Used in the  preparation of acrylate esters, surfactants,
    sugar  refining,  medicine,  fire extinguishing, and special glasses  (*Hawley
    1977).

-------
                                      CAS Registry Number:  1314-56-3
                                      Page 4 of 4
                       PHOSPHORUS PENTOXIDE
SECTION VII -- PRECAUTIONS FOR  SAFE HANDLING AND USE
(Steps  to be Taken in Case Material is Released or Spilled)

    Keep unnecessary people away.  Stay upwind.  Keep out of  low  areas.
    Ventilate closed spaces before entering them.  Wear positive  pressure
    breathing apparatus and protective clothing.  Stop leak  if possible
    without risk.  Do not touch spilled material.  Use water  spray to reduce
    vapors, but do not put water on leak or spill.  Keep combustibles away
    from sjpilled material.  Dike spilled area and keep water  away from spill.
    Clean up requires supervision by  an expert  (DOT 1985, Guide  39).

-------
                                           CAS Registry Number:   1314-62-1
                                           Page  1 of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October  31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- VANADIUM PENTOXIDE

CAS Registry Number:   1314-62-1

Synonyms:  CI 77938; Divanadium Pentaoxide;  Divanadium Pentoxide;  Vanadic
Anhydride;  Vanadium Oxide; Vanadium Pentaoxide

Chemical Formula:  V 0

Molecular Weight:  181.90


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Ceiling 0.5 mg/m3  (dust); Ceiling 0.1 mg/m3  (fume)
    (NIOSH/OSHA  1978, p. 188)

    ACGIH TLV:  TWA 0.05 mg/m3 (respirable  dust and fume) (ACGIH  1985,
    P-  33)

    IDLH:  70 mg/m3 (NIOSH/OSHA 1978, p. 188)

    Other Limits Recommended:   Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  3182°F, 1750°C (decomposition) (*NIOSH/OSHA 1981)

    Specific Gravity (H20=l):  3.357 at 18°C (*Hawley  1981)

    Vapor Pressure (mmHg):  Approximately 0 at 20°C,  68°F (*NIOSH/OSHA 1981)

    Melting Point:  1274°F, 690°C (*Merck 1983)

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate  (Butyl  acetate=l):   Not  Found

    Solubility  in Water:   1 g in  125  ml (*Merck 1983)

    Appearance  and Odor:  Vanadium pentoxide exists  as a yellow-orange
    powder, dark gray flakes, or yellow to rust brown crystals (*NIOSH/OSHA
    1981;  *Merck 1983).   It is odorless  (*CHRIS 1978)

-------
                                            CAS Registry Number:  1314-62-1
                                            Page 2  of 4
                         VANADIUM PENTOXIDE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:  .Not  Flammable  (Weiss 1980, p. 909)
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Small fires:  dry chemical,  carbon dioxide,
    water  spray,  or  foam.   Large  fires:  water spray, fog, or foam.   Move
    container from  fire area  if you can  do it without risk.  Fight fire from
    maximum distance.  Dike fire  control water for later disposal; do not
    scatter the material  (DOT  1984, Guide 55).

    Special  Fire Fighting  Procedures:  Keep unnecessary people away;
    isolate hazard  area and deny  entry.  Stay upwind; keep out of low areas.
    Ventilate closed spaces before entering them.  Wear positive pressure
    breathing apparatus and special protective clothing.   Remove and  isolate
    contaminated clothing at the  site (DOT 1984, Guide 55).

    Unusual  Fire and Explosion Hazards:  Container  may  explode in heat of
    fire (DOT 1984,  Guide 55)  When heated to decomposition, it emits acrid
    smoke  and fumes  of vanadium oxides  (Sax 1984, p. 2718).  Material is not
    flammable but it may  increase the intensity of the fire when in contact
    with combustible materials (Weiss 1980, p. 909).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes  (Weiss 1980,  p.  909)

        Conditions to Avoid:   Not Found

    Incompatibility  (Materials  to  Avoid):  Chlorine trifluoride; lithium;
    peroxyformic acid; and  calcium, sulfur, water complexes (Sax 1984,  p.  2718)

    Hazardous  Decomposition or Byproducts:  When heated to decomposition,
    it emits acrid  smoke  and fumes of vanadium oxides (Sax 1984, p. 2718).

    Hazardous  Polymerization:  May Occur:
                               May Not Occur:   Yes (Weiss  1980, p.  909)

        Conditions to Avoid:   Not Found

-------
                                            CAS Registry Number:   1314-62-1
                                            Page 3 of 4
                         VANADIUM PENTOXIDE
SECTION V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes  (Sax  1984, p. 2718)
                       Skin:   Yes  (Merck 1983,  p. 1418)
                       Ingestion:   Yes (Sax  1984, p. 2718)

    Health Hazards  (Acute, Delayed, and Chronic):   Probable oral  lethal
    dose for humans  is between 5 and 50  mg/kg or between 7 drops and 1
    teaspoonful for  a 70 kg (150 Ib.) person (*Gosselin 1984).  Toxicity is
    about the same magnitude  as pentavalent  arsenic (Gosselin 1984, p. 11-148).

    Signs and  Symptoms of Exposure:   Can cause death by  pulmonary edema.
    Contact with eyes and skin causes irritation and redness.  Ingestion
    causes irritation of mouth and  stomach,  vomiting, abdominal spasms, and a
    green discoloration of the tongue.   Inhalation of dust initially irritates
    the nose and throat, causing coughing  and shortness of breath followed by
    headaches,  a greenish discoloration  of the  tongue, blood in sputum,
    bronchospasm and pulmonary edema.  Chronic  inhalation may cause
    bronchitis, emphysema, and bronchial pneumonia  (Weiss  1980, p. 909; DASE
    1980, p.  950;  *ACGIH 1980;  *Gosselin 1976;  *Clayton and Clayton 1981-82).

    Medical  Conditions Generally Aggravated by Exposure:  Chronic
    respiratory disease (*Encyc Occupat  Health  and Safety  1983).

    Emergency and  First Aid Procedures:  Move victim to  fresh air; call
    emergency medical care.   If not breathing,  give artificial respiration.
    If breathing is  difficult,  give oxygen.  In case of contact with material,
    immediately flush skin or eyes  with  running water for  at least 15
    minutes.   Speed  in removing material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes at  the site.  Keep
    victim quiet and maintain normal body  temperature.  Effects may be
    delayed;  keep victim under observation (DOT 1984, Guide 55).


SECTION VI -- USE INFORMATION

    As catalyst in the oxidation of sulfur dioxide to sulfur trioxide, alcohol
    to acetaldehyde, etc.; for the  manufacture  of yellow glass; inhibiting
    ultraviolet light transmission  in glass; depolarizer;  as developer in
    photography; in  form of ammonium vanadate as mordant in dyeing and
    printing fabrics and in manufacture  of aniline black (Merck 1983, p.  1418).

-------
                                            CAS Registry Number:   1314-62-1
                                            Page 4 of 4
                        VANADIUM  PENTOXIDE


SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken  in Case Material is Released or  Spilled)

    Do not breathe  dust.  Wear proper respiratory protection and protective
    clothing.   In case of contact, immediately flush  skin or eyes with water
    (see Section V  above).  Do not touch spilled  materials; stop leak if you
    can do so without risk.  Use water spray to reduce  vapors.  Small spills:
    absorb with sand or other noncombustible absorbent  material and place into
    containers  for  later disposal.  Small dry spills:   with clean shovel place
    material into clean, dry container and cover; move  containers from spill
    area.   Large spills:  dike far ahead of spill for later disposal (DOT
    1984,  Guide 55).

-------
                                      CAS  Registry Number:  1314-84-7
                                      Page 1  of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October  31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- ZINC PHOSPHIDE

CAS Registry Number:   1314-84-7

Synonyms:  Blue-ox;  Delusal; Kilrat; Mous-con;  Phosvin; Rumetan; Stutox;
Trizinc Diphosphide; Wuehlmaus-Koeder; Wuehlmaustod Arvikol;  Zinc Phosphide
(Zn3?2); Zinc-tox; ZP

Chemical Formula:  P2Zn3

Molecular  Weight:  258.09


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits  Recommended:   Toxicity information:   LD,   oral (rabbit)
                                                        low
    40 mg/kg;  LD5Q oral  (rat) 12 mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  2012°F, 1100°C (*Merck 1983)

    Specific Gravity (H2
-------
                                       CAS  Registry  Number:   1314-84-7
                                       Page 2 of 4
                           ZINC PHOSPHIDE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Do not use water or foam.  Small fires, use dry
    chemical,  soda ash or  lime.   Large  fires, withdraw from area and let burn
    (DOT 1984,  Guide 41).   Do  not use any  agent with  an acid reaction (i.e.,
    carbon dioxide or halogenated agents)  as phosphine will be liberated
    (*CHRIS 1978).

    Special  Fire Fighting Procedures:   Wear boots, protective gloves, and
    goggles.  Wear self-contained breathing apparatus when fighting fires
    involving  this material (Student 1981, p. 541).   Keep unnecessary people
    away;  isolate hazard area  and deny  entry.  Stay upwind; keep out of low
    areas.   Move container  from fire area  if you can  do so without risk  (DOT
    1984,  Guide 41).

    Unusual Fire and Explosion Hazards:   When  heated to  decomposition,  it
    emits  toxic fumes of phosphorus and zinc oxides (Sax  1984, p. 2756).
    Irritating oxides of phosphorus may be formed  in  fires (*VCHRIS 1978).  May
    ignite in  presence of moisture.  Contact with  water produces flammable
    gas.  Runoff to  sewer may  create fire  or explosion hazard (DOT 1984, Guide
    41).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (*Farm Chemicals Handbook 1984)

        Conditions  to Avoid:  May ignite in the  presence of  moisture, or
        evolve flammable  gas  (*DOT 1984).   Stable unless exposed to moisture;
        toxic phosphine gas may  then be  released and collected in closed
        spaces (Sax 1984, p.  2756).

    Incompatibility  (Materials to Avoid):  Reacts violently with
    concentrated sulfuric acid,  nitric acid, and other oxidizing agents
    (*Merck 1983).   Reacts with  hydrochloric acid or sulfuric acid with the
    evolution of spontaneously flammable phosphine  (Merck 1983, p. 1457).

-------
                                      CAS Registry Number:  1314-84-7
                                      Page 3  of 4
                           ZINC PHOSPHIDE
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Decomposition or Byproducts:  Decomposed slowly by water
    giving off phosphine,  a flammable poison gas (Student 1981, p. 541).   When
    heated to decomposition, it emits toxic fumes of oxides of phosphorus  and
    zinc (Sax 1984,  p.  2756).

    Hazardous Polymerization:   May Occur:
                               May Not Occur:  Yes  (Weiss 1980, p. 935)
t
        Conditions to Avoid:   Not  Found
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes ("Arena 1974)
                       Skin:   Yes  (''"DOT  1984)
                       Ingestion:  Yes (*Gosselin 1976)

    Health Hazards  (Acute, Delayed,  and Chronic):   This  compound  is very
    caustic when ingested.  Zinc phosphide reacts with water and acid in the
    stomach and causes  severe  irritation (*Doull 1980).  The probable oral
    lethal dose is  5-50 mg/kg, or between 7 drops and 1 teaspoonful for a 70
    kg (150 Ib.) person.   Most patients die after about 30 hours from
    peripheral vascular collapse secondary to the compound's direct effects.
    Extensive liver damage and kidney damage can also occur.  Ingestion of 4-5
    grams  has produced  death in human adults, but also doses of 25 to 50 grams
    have been survived  (*Gosselin 1976).  The lowest oral lethal dose reported
    for women is 80 mg/kg  (*NIOSH/RTECS  1985).

    Signs and  Symptoms of Exposure:   Earliest  symptoms of oral  ingestion
    include nausea, abdominal pain, tightness in chest, excitement, agitation
    and chills.  Early  labored breathing, shock, halted urinary output,
    metabolic acidosis, muscle cramps and convulsions are grave prognostic
    signs  ("Gosselin 1976).  Inhalation of zinc phosphide dust is followed in
    several hours by vomiting, diarrhea, bluing of skin,  rapid pulse,  fever
    and shock.   The breath smells of phosphine ("Arena 1974).   The compound is
    very caustic and may cause closing of the esophagus (""Rumack 1975 to
    Present).

    Medical Conditions  Generally Aggravated by  Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air;  call
    emergency medical care.  If not breathing, give artificial respiration.
    If breathing is difficult, give oxygen.  Remove and isolate contaminated
    clothing and shoes  at  the  site.  In case of contact with material,
    immediately flush skin and eyes with running water for at least 15
    minutes.  Keep  victim  quiet  and maintain normal body temperature (DOT
    1984,  Guide 41).

-------
                                      CAS Registry Number:  1314-84-7
                                      Page 4 of 4
                          ZINC PHOSPHIDE
SECTION  VI  --  USE  INFORMATION

    It is  a rodenticide  (Encyc Occupat Health and Safety 1983,  p.  2341)  used
    in the manufacture of rat and mouse poison (*Merck 1983).


SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to  be  Taken  in Case Material is Released or Spilled)

    Do not use water.  Keep sparks, flames, and other sources  of ignition
    away.   Keep  material out of water sources and sewers.   Keep material dry.
    Avoid  breathing dusts and fumes from burning material.   Keep upwind.
    Avoid  bodily contact with the material.  Wear boots, protective gloves,
    and goggles.  Do  not handle broken packages without protective equipment.
    Wash away any material which may have contacted the body with copious
    amounts of water  or soap and water.  If contact with the matter is
    anticipated, wear full protective clothing.  For a land  spill,  dig a pit,
    pond,  lagoon, or  holding area to contain liquid or solid material.   For
    water  spill, neutralize with agricultural lime (slaked  lime),  crusted
    limestone, or sodium bicarbonate.  Use mechanical .dredges  or lifts to
    remove immobilized wastes of pollutants and precipitates (Student 1981, p.
    541).   Small dry  spills:  with clean shovel place material  into clean, dry
    container and cover; move containers from spill area.   Large spills:  dike
    spill  for later disposal.  Cover powder spill with plastic  sheet or  tarp
    to minimize  spreading.  Clean up only under supervision  of  an expert.
    Wear positive pressure breathing apparatus and full protective clothing
    (DOT 1984, Guide  41).

-------
                                      CAS Registry Number:   1327-53-3
                                      Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31, 1985
                                                    Revision:
CHEMICAL IDENTITY  -- ARSENOUS OXIDE

CAS Registry Number:  1327-53-3

Synonyms:  Arsenic Trioxide;  Arsenic  (III) Oxide; Arsenic Oxide;  Arsenic
Sesquioxide;  Arsenicum Album; Arsenious Acid;  Arsenious Oxide; Arsenious
Trioxide;  Arsenite;  Arsenolite; Arsenous Acid;  Arsenous Acid Anhydride;
Arsenous Anhydride;  Arsenous Oxide Anhydride;  Arsodent; Claudetite; Crude
Arsenic; Diarsenic Trioxide; White Arsenic

Chemical Formula:  As.O

Molecular  Weight:   197.82


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   TWA 10 yg(As)/m3 (*NIOSH/RTECS 1985)

    ACGIH TLV:  Arsenic  trioxide  production is given an A2  designation
    indicating a chemical  substance associated with industrial processes,
    which are suspected of inducing cancer.   No TLV value  is assigned at this
    time (*ACGIH 1980).

    IDLH:  Not  Found

    Other Limits Recommended:  Toxicity information:  ID,   oral (rabbit)
                                                         low
    4 mg/kg  (*NIOSH/RTECS  1985)


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  869°F,  465°C  (*Merck  1976)

    Specific Gravity (H 0=1):   3.738 (amorphous or vitreous);  3.865
    (arsenolite); 4.15  (claudetite) (Weast 1983,  p.  B-71)

    Vapor Pressure  (mmHg):  66.1 at 312°C ('^Worthing  1979)

    Melting Point:  594.1°F,  312.3°C; 379°F, 193°C sublimes (arsenolite and
    claudetite)  (Weast  1983, p. B-71)

-------
                                      CAS Registry Number:  1327-53-3
                                      Page 2 of 4
                          ARSENOUS  OXIDE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Vapor  Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl  acetate=l):  Not Found

    Solubility in Water:  Sparingly soluble in cold water.   Soluble in 15
    parts  boiling water  (*Merck 1976).

    Appearance and Odor:  White or transparent,  glassy,  amorphous  lumps or
    crystalline powder (-Merck 1976); odorless (*Hawley 1977).


SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:  Not Flammable (-CHRIS 1980)
         LEL:  Not Found
         UEL:   Not Found

    Extinguishing  Methods:  Extinguish fire using agent suitable for type
    of surrounding  fire  (material itself does not  burn  or  burns with
    difficulty).  Use water in flooding quantities as  fog.   Use foam, carbon
    dioxide or dry  chemical (^Student 1981).


    Special  Fire Fighting Procedures:  Wear self-contained breathing
    apparatus  (-Student  1981).

    Unusual Fire and Explosion Hazards:  Toxic fumes of arsenic  trioxide
    and arsine may  be formed  in fire situations (-CHRIS 1980).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                Stable:   It is stable  in air but  slowly oxidizes in acid
                         media ('^Worthing 1979).

         Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):   Sodium chlorate;  fluorine;
    chlorine trifluoride; chromic oxide;  aluminum  chloride;  phosphorus
    pentoxide;  hydrogen  fluoride; oxygen difluoride (-NFPA 1978); tannic  acid;
    infusion cinchona and other vegetable astringent infusions and decoctions;
    iron in solution (*Merck  1976) .

-------
                                      CAS Registry Number:  1327-53-3
                                      Page 3  of 4
                          ARSENOUS OXIDE
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Decomposition or  Byproducts:  Toxic fumes of arsenic trioxide
    and arsine may be  formed in  fire situations (*CHRIS 1980).   Contact with
    halide acids will  form  toxic volatile halides.  Reduction in acid
    solutions will form  arsine  (*AOAC  1965).  Arsenic trioxide and excess  zinc
    filings will explode on heating  ("Bretherick 1979).

    Hazardous Polymerization:   May Occur:   Not Found
                                May Not Occur:  Not  Found

         Conditions to Avoid:   Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (*Friberg 1979)
                      Skin:   Not  Found
                      Ingestion:  Yes (*DOT 1984)

    Health Hazards  (Acute, Delayed,  and Chronic):   Material  is  considered
    super  toxic;  probable  oral  lethal dose  (human) is less than 5 mg/kg,  i.e.,
    a taste (less than 7 drops)  for a 70kg  (150 Ib.) person.   Material causes
    acute  gastrointestinal and  central nervous system symptoms.   Renal and
    hepatic damage have  also been  observed  (*Gosselin 1976).   Chronic exposure
    to material has led  to nasal septum perforation, dermatological symptoms
    (lesions,  necrosis,  etc.)  and  an increase in the incidence of lung and
    lymphatic cancers  (*Gosselin 1976, -Clayton and Clayton 1981-82,
    *Venugopal 1978, "ACGIH 1981).  Appreciable exposure to respiratory
    irritant promoters such as  metal oxide  fumes elicits a carcinogenic
    response from arsenic  trioxide (*Clayton and Clayton 1981-82).

    Signs and  Symptoms of Exposure:   Symptoms of  acute poisoning  may take
    from 1/2 hour to several hours after ingestion to appear.  They may
    include:   sweetish metallic taste; garlicky odor of breath and feces;
    constriction in throat and  difficulty in swallowing; burning and colicky
    pains  in esophagus,  stomach and bowel;  vomiting and profuse painful
    diarrhea (stools are watery initially,  later becoming bloody); dehydration
    with intense thirst  and muscular cramps; bluing of skin;  feeble pulse and
    cold extremities; vertigo,  frontal headache, stupor, delirium and mania
    (these symptoms may  occur without concurrent or preceding gastric
    symptoms); fainting, coma,  convulsions, general paralysis and then death
    (-Gosselin 1976).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:   Flush contaminated eyes, hair  and
    skin with copious  amounts  of fresh water ("Morgan 1976).

-------
                                      CAS Registry Number:  1327-53-3
                                      Page 4 of 4
                          ARSENOUS OXIDE
SECTION  VI  --  USE INFORMATION

    Primary material for all arsenic compounds (*Merck 1976).   It is  an
    intermediate for insecticides, herbicides and fungicides.   The material  is
    used as a wood preservative and a decoloring and refining agent in glass
    manufacture.  It is also used  in Pharmaceuticals and in the purification
    of synthetic gas (*SRI).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be  Taken in Case Material is Released or Spilled)

    Avoid breathing dusts, and fumes from burning materials.  Keep upwind.
    Wear self-contained breathing  apparatus.  Avoid bodily contact with  the
    material.  Do not handle broken packages without protective equipment.
    Wash away any material which may have contacted the body with copious
    amounts of water or soap and water ("Student 1981).   Wear full protective
    clothing  including gloves and  eye protection ("CHRIS 1980).

-------
                                          CAS Registry Number:  1331-17-5
                                          Page 1 of 3
                       EPA CHEMICAL  PROFILE
                                                  INTERIM
                                                  Date: October 31,  1985
                                                  Revision:
CHEMICAL IDENTITY --  PROPYLENE GLYCOL,  ALLYL ETHER

CAS Registry Number:  1331-17-5

Synonyms:  Propanol, Allyloxy-; Allyl Ether of Propylene Glycol;
1,2-Propanediol, Allyl Ether; Propanol,  (2-Propenyloxy)-

Chemical  Formula:  C.H,0CL
                    0  1<£ 2.
Molecular Weight:  116.18


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  LD   oral (mouse) 4
    tag/kg  (*NIOSH/RTECS 1985) (SUSPECT)


SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:  Not Found

-------
                                     CAS  Registry Number:  1331-17-5
                                     Page 2 of 3
                  PROPYLENE GLYCOL, ALLYL ETHER


SECTION III  -- FIRE  AND  EXPLOSION HAZARD DATA

    Flash Point (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not  Found
        UEL:   Not  Found

    Extinguishing Methods:  Not Found

    Special Fire Fighting Procedures:   Not  Found

    Unusual Fire and  Explosion Hazards:  Not Found


SECTION IV  -- REACTIVITY DATA

    Stability:   Unstable:  Not  Found
                Stable:  Not Found

        Conditions  to  Avoid:   Not Found

    Incompatibility  (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:   Not Found
                              May Not Occur:  Not  Found

        Conditions  to  Avoid:   Not Found


SECTION V -- HEALTH  HAZARD DATA

    Routes  of Entry:  Inhalation:  Not Found
                     Skin:   Not Found
                     I ngestion :   Not Found

    Health Hazards  (Acute,  Delayed, and Chronic):  Not Found

    Signs and Symptoms of Exposure:  Not  Found

    Medical Conditions Generally Aggravated by  Exposure:   Not Found

    Emergency and  First Aid Procedures:   Not Found

-------
                                         CAS Registry Number:   1331-17-5
                                         Page 3 of 3
                  PROPYLENE GLYCOL, ALLYL ETHER
SECTION VI -- USE INFORMATION

    Not Found
SECTION VII --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be Taken  in Case Material is Released or Spilled)

    Not Found
COMMENTS

    Sources searched but no information found:
       Hayes 1982
       Verschueren 1983
       Hawley 1981
       Sax 1984
       Merck 1983
       Weast 1979
       Gosselin 1984
       Oilman 1985
       DOT 1984
       NFPA 1984

-------
                                           CAS Registry Number:  1335-87-1
                                           Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October 31,  1985
                                                  Revision:
CHEMICAL IDENTITY --  HEXACHLORONAPHTHALENE

CAS Registry  Number:  1335-87-1

Synonyms:  (NIOSH/RTECS Synonyms 1983, Volume 2, p. 802)  Naphthalene,
Hexachloro-; Halowax 1014

Chemical Formula:   C,-H_C1,
                    10 z   b
Molecular Weight:  334.82


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Air:  TWA 0.2 mg/m3  (skin) (*NIOSH/RTECS 1977)

    ACGIH TLV:   0.2 mg/m3 (skin)  (*ACGIH 1979); STEL 0.6 mg/m3 (ACGIH
    1983-1984, p. 22)

    IDLH:  2 mg/m3 (NIOSH/OSHA 1978, p.  108)

    Other Limits Recommended:  Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Greater than 518°F, 270°C (DASE 1980, p. 531);
    650-730°F, 343-388°C  (NIOSH/OSHA  1978, p.  108)

    Specific Gravity (H20=l):  1.6-2 (DASE 1980, p. 531)

    Vapor Pressure (mmHg): Less than 1 at 20°C (NIOSH/OSHA 1978, p.  108)

    Melting Point:   68-95°F, 20-35°C (DASE 1980, p. 531);  279°F,  137°C
    (NIOSH/OSHA 1978, p.  108)  (SUSPECT)

    Vapor Density (AIR=1):  11.6 (DASE 1980, p.  531)

    Evaporation Rate  (Butyl acetate=l):   Not Found

    Solubility  in Water:   Insoluble  (NIOSH/OSHA  1978, p. 108)

    Appearance and Odor:  White solid (Sax 1934, p.  1508); light yellow
    solid with aromatic odor (NIOSH/OSHA  1978,  p.  108)

-------
                                            CAS Registry Number:   1335-87-1
                                            Page 2 of 3
                      HEXACHLORONAPHTHALENE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   More than 248°F  (no method given)
    (BASE  1980, p.  531)
    Flammable  Limits:  Not combustible (NIOSH/OSHA 1978, p. 108)
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Water spray,  powder  (BASE 1980, p. 531)

    Special  Fire Fighting  Procedures:  Not Found

    Unusual Fire and Explosion Hazards:  Burning produces  toxic and
    corrosive  gases  (e.g., hydrogen chloride)  (DASE  1980, p. 531).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:   Not Found
                 Stable:  Not Found

        Conditions  to Avoid:  Heat, acid, or acid fumes  (*Sax  1975)

    Incompatibility  (Materials to Avoid):   Strong oxidizers  (NIOSH/OSHA
    1978,  p. 108)

    Hazardous  Decomposition or Byproducts:   Heated  to decomposition it
    emits  toxic fumes of chlorine containing compounds (Sax 1984, p. 1508),
    Possible major  toxic effects due to contaminants  or synthetic
    intermediates  introduced during manufacturing process (*Gosselin 1976)

    Hazardous  Polvmerization:   May Occur:  Not Found
                               May Not  Occur:   Not Found

        Conditions to Avoid:  Not Found
SECTION  V --  HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:   Yes (NIOSH/OSHA 1978, p. 108)
                      Skin:  Yes (NIOSH/OSHA 1978, p.  108)
                      Ingestion:   Yes (NIOSH/OSHA 1978, p. 108)

    Health Hazards (Acute,  Delayed,  and Chronic):  Acneform rash and severe
    liver  damage have occured in humans exposed to this compound by inhalation.
    Photosensitization and allergic sensitization have also been reported.
    The ingestion  toxicity is not well defined (Gosselin 1976, p. 11-116).

-------
                                            CAS  Registry Number:  1335-87-1
                                            Page 3 of 3
                      HEXACHLORONAPHTHALENE
SECTION  V --  HEALTH  HAZARD DATA (Continued)

    Signs and Symptoms of Exposure:  Signs and symptoms  resulting from
    liver injury  include drowsiness, indigestion, nausea (*Dreisbach 1977).
    Jaundice, confusion and coma have been reported  (NIOSH/OSHA 1978,  p.
    108).   Acneform  (chloracne) dermatitis and  toxic dermatitis are primary
    problems  that  result from contact (*Encyc Occupat Health and Safety 1971).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency  and First Aid  Procedures:   After inhalation, remove exposed
    person to fresh  air and enforce rest.   Call for medical attention.   If
    skin contact  occurs, remove contaminated clothes, wash skin with soap and
    water, and  send  victim for medical attention.   If this compound is
    ingested, rinse  victim's mouth, give plenty of water to drink and
    transport to  hospital immediately (BASE 1980, p. 531).


SECTION  VI  -- USE INFORMATION

    Used in synthetic waxes, electrical insulating materials, and as
    lubricants  (*Gosselin 1976).


SECTION  VII --  PRECAUTIONS FOR SAFE HANDLING  AND USE
(Steps to be  Taken in Case Material is Released or  Spilled)

    Sweep up  spilled substance, carefully collect remainder (extra personal
    protection:   Class 2C particle filter respirator)  (DASE 1980, p. 531).
    Contact of  skin  with these materials should be  avoided as far as
    possible.   Work  clothes should be frequently inspected and laundered daily
    (*Encyc Occupat  Health and Safety 1971).

-------
                                          CAS Registry Number:   1397-94-0
                                          Page 1 of 4
                      EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October 31, 1985
                                                  Revision:
CHEMICAL  IDENTITY  -- ANTIMYCIN A

CAS Registry Number:  1397-94-0

Synonyms:   (NIOSH/RTECS 1983 Synonyms,  Volume 1, p. 430):
AntipiricuUin; Virosin

Chemical  Formula:  C28H40N2°9

Molecular Weight:  548.70


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  ID.   oral  (guinea
    pig)  1.8 mg/kg (*NIOSH/RTECS 1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity (H.0=l):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point: Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl acetate=l):   Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:  Not Found

-------
                                            CAS Registry Number:   1397-94-0
                                            Page 2 of 4
                           ANTIMYCIN A
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  (Non-Specific --  Pesticide, Solid, n.o.s.)
    Small  fires:   dry chemical, carbon dioxide,  water spray, or foam.  Large
    fires:   water spray, fog, or foam.  Move container  from  fire area if you
    can do so without risk.  Fight fire from maximum distance.  Dike fire
    control water for later disposal; do not scatter the material (DOT 1984,
    Guide  55).

    Special  Fire Fighting  Procedures:  (Non-Specific -- Pesticide, Solid,
    n.o.s.)  Keep unnecessary people away; isolate hazard  area and deny.
    entry.   Stay upwind; keep out of low areas.   Ventilate closed spaces
    before entering  them.  Wear positive pressure breathing  apparatus and
    special protective clothing.  Remove and isolate contaminated clothing at
    the site (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:  Not Found
SECTION  IV  --  REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:   When heated  to decomposition,
    it emits  toxic fumes of oxides of nitrogen (Sax 1984,  p. 307).

    Hazardous Polymerization:   May Occur:   Not Found
                               May  Not  Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V --  HEALTH HAZARD  DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Yes (Sax 1984,  p.  307)

-------
                                      CAS Registry Number:  1397-94-0
                                      Page 3 of 4
                           ANTIMYCIN  A


SECTION  V -- HEALTH  HAZARD DATA  (Continued)

    Health Hazards (Acute, Delayed, and Chronic):  Not  Found

    Signs and Symptoms of Exposure:   Not  Found

    Medical  Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid  Procedures:   (Non-Specific -- Pesticide,  Solid,
    n.o.s.)   Move victim to fresh air; call emergency medical  care.   If not
    breathing,  give artificial respiration.  If breathing is difficult,  give
    oxygen.   In case  of  contact with material, immediately flush skin or eyes
    with running water for at least 15 minutes.  Speed in removing material
    from skin is of extreme importance.  Remove and isolate contaminated
    clothing and shoes at the site.  Keep victim quiet and maintain normal
    body temperature.  Effects may be delayed; keep victim under observation
    (DOT 1984,  Guide  55).


SECTION  VI --  USE  INFORMATION

    Specific uses for Antimycin A were not  found,  however,  Antimycin A , and

    Antimycin A« are  reported to be antibiotic substances produced by

    Streptotnyces for  use as a fungicide, possible insecticide  and miticide
    (Merck 1983, pp.  104-105, Hawley 1981, p. 82).   Only registered as  a
    pesticide in the  U.S.  (USEPA/Pesticide  Index 1985).


SECTION  VII  -- PRECAUTIONS FOR SAFE  HANDLING AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    (Non-Specific --  Pesticide, Solid, n.o.s.)  Keep unnecessary people away;
    isolate  hazard area  and deny entry.  Stay upwind; keep out of low areas.
    Ventilate closed  spaces before entering them.   Wear positive pressure
    breathing apparatus  and special protective clothing.  Remove and isolate
    contaminated clothing at the site.   Do not touch spilled material;  stop
    leak if  you can do so without risk.  Use water spray to reduce vapors.
    Small spills:  absorb with sand or other noncombustible absorbent material
    and place into containers for later  disposal.   Small dry spills:  with
    clean shovel place material into clean, dry container and  cover; move
    containers  from spill area.  Large spills:  dike far ahead of spill for
    later disposal (DOT  1984, Guide 55).

-------
                                      CAS Registry Number:  1397-94-0
                                      Page 4 of 4
                           ANTIMYCIN A
COMMENTS:

    Sources  searched but no information found:
        ACGIH 1983
        NIOSH/OSHA  1978
        Weast 1979
        NFPA 1984
        Student  1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton  and Clayton 1981-82
        Arena 1979
        Gosselin 1984
        Encyc Occupat Health and Safety 1983
        Buchel 1983
        Hayes 1982
        Physicians' Desk Reference 1985

-------
                                     CAS Registry Number:  1405-87-4
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October 31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  BACITRACIN

CAS Registry  Number:  1405-87-4

Synonyms:  (NIOSH/RTECS 1983  Synonyms, Volume  1, p. 476)  Ayfivin;
Baciguent;  Baci-jel; Baciliquin;  Bacitek Ointment; Parentracin;  Penitracin;
Topitracin; Topitrasin; USAF  CB-7; Zutracin; Bacitracin (ACN)

Chemical Formula:   Not Found

Molecular Weight:  Not Found


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD  oral  (mouse)
    25 mg/kg (^NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure (mmHg):   Not  Found

    Melting Point:   Not Found

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:   Soluble  (Merck 1983,  p.  136)

    Appearance and Odor:  Grayish white powder  with very bitter  taste
    (Merck 1983, p.  136).   Odorless or slight  odor (Hawley 1981, p.  101)

-------
                                      CAS Registry Number:   1405-87-4
                                      Page 2 of 4
                            BACITRACIN
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  (Non-Specific  -- Medicines, n.o.s.)  Small
    fires:   dry chemical, carbon dioxide, water spray, or foam.  Large fires:
    water  spray,  fog, or foam.   Move container  from  fire area if you can do so
    without risk.  Fight fire from maximum  distance.  Dike fire control water
    for later disposal; do not scatter the  material  (DOT 1984, Guide 55).

    Special  Fire Fighting  Procedures:  (Non-Specific -- Medicines, n.o.s.)
    Keep unnecessary people away; isolate hazard area and deny entry.  Stay
    upwind;  keep out of low areas.  Ventilate closed spaces before entering
    them.   Wear positive pressure breathing apparatus and special protective
    clothing.   Remove and isolate contaminated  clothing at the site  (DOT 1984,
    Guide  55).

    Unusual Fire and Explosion Hazards:  Not Found
SECTION  IV --  REACTIVITY DATA

    Stability:  Unstable:
                Stable:  Yes, powder form is stable  (Hawley 1981, p.  101)

        Conditions to Avoid:  Solutions deteriorate at  room  temperature
        (Hawley  1981, p. 101)

    Incompatibility (Materials to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:  Not  Found

    Hazardous Polymerization:  May Occur:  Not Found
                               May Not  Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:   Not Found
                      Skin:  Yes (Gilman 1985,  p.  1194)
                      Ingestion:   Not Found

-------
                                       CAS Registry Number:   1405-87-4
                                       Page 3 of 4
                             BACITRACIN
SECTION  V -- HEALTH HAZARD DATA  (Continued)

    Health Hazards  (Acute, Delayed, and Chronic):   Hypersensitivity
    reactions may result from  application of this compound to the skin,  but
    this is uncommon (Oilman  1985,  p.  1194).

    Signs and  Symptoms of Exposure:   Not  Found

    Medical Conditions  Generally Aggravated by  Exposure:  Not Found

    Emergency and  First Aid Procedures:   (Non-Specific -- Medicines,
    n.o.s.)  Move victim to  fresh  air; call emergency medical care.   If  not
    breathing,  give artificial  respiration.  If breathing is difficult,  give
    oxygen.  In case of contact with material, immediately flush skin or eyes
    with running water  for at  least 15 minutes.  Speed in removing material
    from skin is of extreme  importance.  Remove and isolate contaminated
    clothing and shoes  at the  site.  Keep victim quiet and maintain normal
    body temperature.   Effects  may be  delayed; keep victim under observation
    (DOT 1984,  Guide 55).


SECTION  VI -- USE INFORMATION

    Ingredient  in antibiotic ointments to treat or prevent topical or eye
    infections  (Oilman  1985, p.  1194).   Antibiotic polypeptide complex
    produced by Bacillus subtilis  and  licheniformis.  Commercial bacitracin
    is a mixture of at  least 9  bacitracins  (Merck 1983, p. 135).  Also used as
    a feed and  drinking water  additive in animals, and a food additive in food
    for human consumption (Sax  1984, p.  342).


SECTION  VII --  PRECAUTIONS FOR SAFE  HANDLING  AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    (Non-Specific -- Medicines, n.o.s.)  Keep unnecessary people away; isolate
    hazard area and deny entry.  Stay  upwind; keep out of low areas.
    Ventilate closed spaces before entering them.  Wear positive pressure
    breathing apparatus and special protective clothing.  Remove and isolate
    contaminated clothing at the site.   Do not touch spilled material; stop
    leak if you can do  so without  risk.  Use water spray to reduce vapors.
    Small spills:  absorb with  sand or other noncombustible absorbent material
    and place into containers  for  later  disposal.  Small dry spills:   with
    clean shovel place  material into clean, dry container and cover;  move
    containers  from spill area.  Large spills:  dike far ahead of spill  for
    later disposal (DOT 1984,  Guide 55).

-------
                                     CAS Registry Number:  1405-87-4
                                     Page 4 of 4
                            BACITRACIN
COMMENTS
    Sources searched but no information found:
        Physicians' Desk Reference 1980
        Weast 1979
        Hayes 1982
        Clayton and Clayton 1981-82
        Doull 1980

-------
                                           CAS Registry Number:   1420-07-1
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- DINOTERB

CAS Registry Number:   1420-07-1

Synonyms:  2,4-Dinitro-6-tert-Butylphenol;  2-(l,l-Dimethylethyl)-4,6-
Dinitrophenol; 2-tert-Butyl-4,6-Dinitrophenol; Dinoterbe;  DNTBP; Herbogil;
Phenol,  2-(l,l-Dimethylethyl)-4,6-Dinitro-; Phenol, 2-tert-Butyl-4,6-Dinitro-;
Phenol,  o-t-Butyl-4,6-Dinitro-;  Stirpan Forte; Veraline Creme

Chemical Formula:  C  H  N 0

Molecular  Weight:  240.24


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:   Not  Found

    IDLH:  Not Found

    Other Limits  Recommended:  Toxicity information:   LDcn oral (mouse)
    25 mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H20=l):  Not Found

    Vapor Pressure  (mmHg):   Not Found

    Melting Point:  259°F, 126°C (*Worthing 1979)

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate (Butyl acetate=l):   Not Found

    Solubility in  Water:  Practically insoluble (*Worthing 1979).

    Appearance and Odor:  Yellow solid  (*Worthing 1979).

-------
                                            CAS Registry Number:   1420-07-1
                                            Page 2 of 3
                             DINOTERB
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  (Non-Specific --  Dinitro-o-cresol)  Use dry
    chemical,  carbon dioxide, water spray, or  foam for  small  fires, and water
    spray,  fog,  or foam for  large fires.   Move container  from fire area if
    possible (DOT 1984, Guide 53).

    Special  Fire Fighting  Procedures:  (Non-Specific  -- Dinitro-o-cresol)
    Isolate hazard area, stay upwind, and keep out of low areas.  Wear
    self-contained breathing apparatus and full protective clothing (DOT 1984,
    Guide  53).

    Unusual Fire and Explosion Hazards:  When heated to  decomposition  it
    emits  toxic nitrogen oxide fumes (Sax 1984, p.  1160).
SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:   When heated to decomposition it
    emits  toxic  nitrogen oxide fumes (Sax 1984,  p.  1160).

    Hazardous Polymerization:  May Occur:   Not Found
                               May Not  Occur:   Not Found

        Conditions to Avoid:  Not Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Non-Specific --  Dinitro-o-Cresol)
                                  (ACGIH 1980,  p.  152-153)
                      Skin:  Yes (Non-Specific  -- Dinitro-o-Cresol)  (ACGIH
                             1980, p. 152-153)
                      Ingestion:   Yes (Non-Specific --  Dinitro-o-Cresol)
                                  (ACGIH 1980,'p.  152-153)

-------
                                            CAS Registry Number:  1420-07-1
                                            Page 3 of 3
                              DINOTERB
SECTION  V -- HEALTH HAZARD DATA (Continued)

    Health Hazards  (Acute, Delayed, and Chronic):  This  compound is toxic by
    all routes of exposure.  The dangerous single oral dose of dinitro-o-
    cresol, a structurally similar  compound (-Rumack 1975 to Present),  is
    estimated to be  about  29 mg/kg  (Hayes 1982, p.  469).

    Signs and  Symptoms of Exposure:   Symptoms of poisoning are similar to
    other dinitrophenols  (*Rumack 1975 to Present)  and may include  nausea,
    gastric distress,  restlessness, sensation of heat, flushed skin,  sweating,
    thirst, deep and rapid breathing, rapid heart rate,  fever,  and  lack of
    oxygen to tissues  (blueness of  skin) (Hayes 1982, p. 469).

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  (Non-Specific -- Dinitro-o-
    Cresol)  Move victim to fresh air; call emergency medical care.   Remove
    and isolate contaminated shoes  and clothing at  the site.   In case of
    contact with material,  immediately flush skin or eyes with running  water
    for at least 15  minutes  (DOT 1984, Guide 53).


SECTION  VI -- USE INFORMATION

    This compound is a  herbicide (Farm Chemicals Handbook 1984, p.  C82)  and a
    rodenticide (*Tsubura  and Kato  1974).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or  Spilled)

    Avoid inhalation (see  Section V above).   (Non-Specific --
    Dinitro-o-Cresol)   Do  not touch spilled material; stop source of  spill or
    leak if it can be done without  risk.  Take up small  spills  with sand or
    other noncombustible absorbent material and place into containers for
    later disposal.   Shovel small dry material into clean, dry container and
    cover.  Remove from spill area  for later removal.  Dike far ahead of spill
    for later disposal  (DOT 1984, Guide 53).

-------
                                           CAS  Registry Number:  1464-53-5
                                           Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- DIEPOXYBUTANE

CAS Registry  Number: . 1464-53-5

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume  1, p. 757)  1,2:3,4-
Diepoxybutane; 1,1'-Bi(Ethylene Oxide); Bioxiran;  Bioxirane; 2,2'-Bioxirane;
Butadiene  Dioxide; 2,4-Diepoxybutane; Dioxybutadiene; ENT-26592; Erythritol
Anhydride; Threitol, 1,2:3,4-Dianhydro-

Chemical Formula:   C,H,00
                    462
Molecular Weight:  86.10


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC   inhalation
    (rat)  0.317 mg/liter/4 hours (*NIOSH/RTECS  1985)


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   280°F, 138°C  at  1 atm  (Merck 1983, p.  531)

    Specific  Gravity (H20=l):  1.113 at 18/4°C  (Merck 1983,  p. 531)

    Vapor Pressure (mmHg):   Not Found

    Melting Point:   Not  Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

-------
                                     CAS Registry  Number:  1464-53-5
                                     Page 2 of 3
                          DIEPOXYBUTANE
SECTION II  --  PHYSICAL/CHEMICAL  CHARACTERISTICS (Continued)

    Solubility in Water:   Soluble (Weast 1980,  p. C-219); hydrolyzes  to
    erythritol  (Merck 1983, p. 531)

    Appearance and Odor:  Colorless liquid (Sax  1984, p. 429)
SECTION III  -- FIRE  AND  EXPLOSION HAZARD DATA

    Flash Point (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not  Found
        DEL:   Not  Found

    Extinguishing Methods:  Not Found

    Special  Fire Fighting Procedures:  Not Found

    Unusual Fire and  Explosion Hazards:  When heated to decomposition it
    emits acrid smoke  and irritating fumes (Sax 1984, p. 429).


SECTION IV  -- REACTIVITY DATA

    Stability:  Unstable:   Not  Found
                Stable:  Not Found

        Conditions  to  Avoid:   Not Found

    Incompatibility  (Materials  to Avoid):  Not  Found

    Hazardous Decomposition or Byproducts:   When heated to decomposition,
    it  emits  acrid  smoke  and irritating fumes  (Sax 1984, p. 429).

    Hazardous Polymerization:   May Occur:  Not Found
                              May Not Occur:  Not Found

        Conditions  to  Avoid:   Not Found


SECTION V -- HEALTH  HAZARD  DATA

    Routes  of Entry:  Inhalation:  Yes (Sax 1984, p.  429)
                     Skin:   Yes  (Sax 1984,  p. 429)
                      Ingestion:   Yes (Sax 1984, p.  429)

-------
                                      CAS Registry Number:   1464-53-5
                                      Page 3 of 3
                          DIEPOXYBUTANE
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Health Hazards (Acute, Delayed,  and Chronic):  Severe skin and eye
    irritant (Sax  1984, p. 429).  Accidental minor exposure  caused swelling of
    the eyelids, upper respiratory tract irritation and  painful eye irritation
    6 hours after  exposure (Encyc Occupat Health and Safety  1983, p. 772).

    NOTE:  The dl- and  meso-forms  (CAS Registry Numbers 298-18-0 and
    564-00-1,  respectively) as well as the L(-)  form (CAS Registry Number
    30031-64-2) have all been determined to be positive  animal carcinogens
    (NIOSH/RTECS 1983, Volume 1, p. 757).

    Signs and Symptoms of Exposure:  Symptoms include swelling  of the
    eyelids, upper respiratory tract irritation, and delayed eye  irritation
    (Encyc Occupat Health  and Safety 1983, p. 772).

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid  Procedures:   (Poisonous Liquid or Gas, n.o.s.)
    Move victim to fresh air; call emergency medical care.   If not breathing,
    give artificial respiration.  If breathing is  difficult, give oxygen.
    Remove and isolate contaminated clothing and shoes at the site.  In case
    of contact with material, immediately flush  with running water for at
    least 15 minutes.  Keep victim quiet and maintain normal body
    temperature.   Effects may be delayed;  keep victim under  observation (DOT
    1984,  Guide 15).


SECTION  VI -- USE INFORMATION

    It is used as  a research chemical (*SRI); in curing  polymers; crosslinking
    textile fibers; and to prevent microbial spoilage (Merck 1983, p. 531).


SECTION  VII  --PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be Taken in Case Material is Released  or Spilled)

    Do not touch spilled material.  Wear positive pressure breathing
    apparatus, eye protection and full protective clothing  (see Section V
    above).

-------
                                     CAS  Registry Number:  1558-25-4
                                     Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 9, 1985
                                                  Revision:
CHEMICAL IDENTITY --  TRICHLORO(CHLOROMETHYL)SILANE

CAS Registry Number:  1558-25-4

Synonyms:  (SANSS 1983 Synonyms)  Silane,  Trichloro(Chloromethyl)-;
(Chloromethyl)Trichlorosilane; Trichloro(Chloromethyl) Silane

Chemical Formula:   CH Cl.Si

Molecular Weight:  184


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity  information:  LD..   oral (mouse)
    100  rag/kg; LC   inhalation (mouse) 0.03  mg/liter/2 hours  (-NIOSH/RTECS
    1985)


SECTION  II --  PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity (H 0=1):   Not  Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:  Not Found

-------
                                      CAS Registry Number:  1558-25-4
                                      Page 2 of 3
                  TRICHLORO(CHLOROMETHYL)SILANE
SECTION  III  --  FIRE AND EXPLOSION  HAZARD  DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing  Methods:  Not Found

    Special Fire  Fighting  Procedures:   Do not get water inside  container
    (see Section VII below).

    Unusual Fire and Explosion  Hazards:   Not Found
SECTION  IV  -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:   Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:  May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:  Not Found

    Health  Hazards  (Acute,  Delayed, and Chronic):   (Non-Specific -- Methyl
    Trichlorosilane)  If inhaled,  may be harmful; contact  may cause burns to
    skin and  eyes.  Runoff from fire control or dilution water may cause
    pollution (DOT 1984,  Guide  29).

    Signs  and Symptoms  of  Exposure:   Not  Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

-------
                                      CAS Registry Number:  1558-25-4
                                      Page 3 of 3
                   TRICHLORO(CHLOROMETHYL)SILANE
SECTION  V -- HEALTH  HAZARD  DATA

    Emergency and First Aid Procedures:  (Non-Specific -- Methyl
    Trichlorosilane)  Move victim to fresh air;  call emergency medical care.
    If not breathing, give artificial respiration.   If breathing is difficult,
    give oxygen.   Remove  and  isolate contaminated clothing and shoes at the
    site.   In case of contact with material,  immediately flush skin or eyes
    with running  water for at least 15 minutes.   Keep victim  quiet and
    maintain normal body  temperature (DOT 1984,  Guide 29).


SECTION  VI -- USE INFORMATION

    Not Found.
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or Spilled)

    (Non-Specific -- Methyl Trichlorosilane)  Keep unnecessary  people away;
    isolate hazard  area and deny entry.  Stay upwind;  keep out  of  low areas.
    Wear positive pressure breathing apparatus and special protective
    clothing.  If water pollution occurs, notify appropriate  authorities.
    Shut off ignition sources; no flares, smoking or flames in  hazard area.
    Do not touch  spilled material; stop leak if you can  do so without risk.
    Use water spray to reduce vapors; do not get water inside container.
    Small  spills:   flush area with flooding amounts of water.   Large spills;
    dike far ahead  of spill for later disposal (DOT 1984, Guide 29).
COMMENTS:

    Sources  searched but no information found:
        NIOSH/RTECS 1983
        ACGIH 1983
        NIOSH/OSHA 1978
        Hawley 1981
        Weast 1979
        Merck 1983
        Sax  1984
        NFPA 1984
        Student 1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton and Clayton 1981-82
        Arena 1979
        Encyc Occupat Health and Safety 1983
        Buchel 1983
        Gilman 1985

-------
                                      CAS Registry Number:   1563-66-2
                                      Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31,  1985
                                                    Revision:
CHEMICAL IDENTITY  -- CARBOFURAN

CAS Registry Number:  1563-66-2

Synonyms:  Carbamic Acid,  Methyl-, 2,3-Dihydro-2,2-Diraethyl-7-Benzofuranyl
Ester; 2,2-Dimethyl-2,2-Dihydrobenzofuranyl-7  N-Methylcarbamate;
2,3-Dihydro-2,2-Dimethyl-7-Benzofuranol-N-Methylcarbamate;
2,3-Dihydro-2,2-Dimethylbenzofuranyl Methylcarbamate; 2,3-Dihydro-2,2-
Dimethylbenzofuranyl-7-N-Methylcarbamate;  7-Benzofuranol, 2,3-Dihydro-
2,2-Ditnethyl-,  Methylcarbamate; Bay 70143;  Chinufur; Curaterr; D 1221; ENT
27,164; FMC 10242;  Furadan; Furadan 3G;  Furodan; NIA 10242; Niagara 10242;
Niagara Nia-10242;  QMS 864; Yaltox; 7-Benzofuranol, 2,3-Dihydro-2,2-Dimethyl-,
Methylcarbamate

Chemical Formula:  C.2H  NO

Molecular  Weight:   221.28


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  TWA 0.1  mg/m3  (-ACGIH 1983)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity  information:  LC   inhalation

    (guinea pig) 0.043 mg/liter for 4 hours (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity (H 0=1):   1.18 at 20°C  (*Farm Chemicals Handbook

    1984)

    Vapor  Pressure (mmHg):  2 x 10"  at 33°C  (*Farm Chemicals Handbook
    1984)
    Melting  Point:  302-307°F,  150-153°C  (*Merck 1983)

    Vapor Density  (AIR=l):  Not Found

-------
                                      CAS Registry Number:  1563-66-2
                                      Page 2 of 3
                            CARBOFURAN


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Evaporation  Rate (Butyl acetate=l):   Not  Found

    Solubility  in Water:  700 ppm at  25°C  (*Merck 1976)

    Appearance  and Odor:  White crystalline solid ("Merck 1976); odorless
    (-Farm Chemicals Handbook 1984)


SECTION  III  --  FIRE AND EXPLOSION  HAZARD  DATA

    Flash  Point  (Method Used):   Not  Found
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing  Methods:   Use dry chemical, carbon  dioxide, water spray,
    or foam.   Dike  fire control water for  later disposal,  do not  scatter the
    material  (*DOT  1984).

    Special Fire  Fighting  Procedures:  Stay at maximum distance  ("DOT 1984).

    Unusual Fire and Explosion Hazards:   May release nitrogen oxides  (Sax
    1984,  p.  1152).  Containers may  explode in heat of fire (-DOT 1984).


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:
                Stable:  Yes   (Under neutral or acid  conditions  (*Spencer
                         1982)

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):   Alkalies (*Merck 1976)

    Hazardous Decomposition or Byproducts:  Nitrogen oxides (Sax 1984, p.
    1152)

    Hazardous Polymerization:  May  Occur:  Not  Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  1563-66-2
                                            Page 3 of 3
                             CARBOFURAN
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (*DOT 1984)
                       Skin:   Yes  (*DOT 1984)
                       Ingestion:  Yes  (*DOT 1984')

    Health Hazards  (Acute, Delayed,  and Chronic):   This  material is
    extremely poisonous.   May  be fatal  if swallowed, inhaled, or absorbed
    through skin.   Contact may burn skin or eyes ("DOT 1984).  Probable  lethal
    oral dose to humans 5  to 50 mg/kg or 7 drops to 1 teaspoon for  150 Ib.
    person (-Gosselin 1976).

    Signs and Symptoms of Exposure:   Symptoms  include  headache, giddiness,
    blurred vision,  weakness;  nausea, cramps, diarrhea, chest discomfort,
    sweating, contraction  of pupils, tearing; salivation, blue lips,  lungs  and
    abdomen fill with fluid, convulsions, coma, loss of reflexes and  sphincter
    control (*Gosselin 1976).

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Move victim to fresh air;  call
    emergency medical care.  If not breathing, give artificial respiration.
    If breathing is  difficult, give oxygen.  In case of contact with  material,
    immediately  flush skin or  eyes with running water for at least  15
    minutes.   Speed in removing material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes at the site.   Keep
    victim quiet and maintain  normal body temperature.  Effects may be
    delayed;  keep victim under observation (*DOT 1984).


SECTION  VI  --  USE

    This material is used  as an insecticide on corn, alfalfa, tobacco and
    other field  crops (*SRI).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING  AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    In case of releases or spills, stay upwind; keep out of  low areas.
    Ventilate closed spaces before entering them.  Wear positive pressure
    breathing apparatus and special protective clothing  ("DOT 1984).

-------
                                           CAS Registry Number:   1600-27-7
                                           Page 1 of 3
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- MERCURIC ACETATE

CAS Registry Number:   1600-27-7

Synonyms:  Acetic Acid, Mercury(2+) Salt;  Bis(acetyloxy)Mercury;
Diacetoxymercury;  Mercuriacetate;  Mercuric Diacetate; Mercury  (II) Acetate;
Mercury Acetate; Mercury Diacetate;  Mercury(2+) Acetate;  Mercuryl Acetate

Chemical Formula:   Hg(C H  0  )

Molecular  Weight:   318.70


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   TWA 0.10 mg/m3  (*ACGIH 1983)

    IDLH:  Not Found

    Other Limits Recommended:  Occupational exposure  to inorganic mercury
    recommended standard -- air:   TWA  0.05 mg (Hg)/m3.   Toxicity
    information:   LD   oral (mouse)  23.9 mg/kg (*NIOSH/RTECS  1985).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Decomposes (Merck 1983,  p. 839)

    Specific Gravity (H20=l):  3.270 (*Weast 1979)

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   352-356°F, 178-180°C (*Merck 1983)

    Vapor Density  (AIR=1):   Not Found

    Evaporation Rate  (Butyl  acetate=l):  Not Found

    Solubility in Water:   25 g/100 mL of water at 10°C,  100 g/100 raL of
    water at  100°C (*Weast 1979)

-------
                                      CAS Registry Number:   1600-27-7
                                      Page 2 of 3
                         MERCURIC ACETATE
SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS (Continued)

    Appearance  and Odor:  White scales or powder  (*Weast  1979); crystals or
    crystalline  powder with a slight acetic odor (Merck  1983, p. 839); white
    solid  with a mild vinegar-like odor (Weiss  1980,  p.  579)
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods  Not flammable (Weiss  1980, p. 579).  Extinguish
    fire using agent suitable for type of surrounding fire.  Material itself
    does not burn or burns with difficulty.   Use  water in flooding quantities
    as fog.   Use foam, carbon dioxide or dry chemical to extinguish fires
    (Student 1981, p. 324).

    Special  Fire Fighting  Procedures:  Avoid breathing dusts,  and fumes
    from burning material.  Keep upwind.   Avoid bodily contact with the
    material.   Wear boots, protective gloves,  and goggles.  Do not handle
    broken packages without protective equipment.   Wash away any material
    which  may have contacted the body with copious amounts of water or soap
    and water.   Wear self-contained breathing apparatus when fighting fires
    involving this material.  If contact with the material is  anticipated,
    wear full protective clothing (Student 1981,  p.  324).

    Unusual Fire and Explosion Hazards:  When heated to decomposition,  it
    emits  toxic fumes of mercury (Sax 1984,  p.  1747).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (Weiss 1980, p.  579)

        Conditions to Avoid:  Light  (Sax 1984, p. 1747)

    Incompatibility (Materials to Avoid):   Not Found

    Hazardous  Decomposition or Byproducts:   When heated to decomposition,
    it emits toxic fumes of mercury  (Sax 1984,  p.  1747).

    Hazardous  Polymerization:  May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  1600-27-7
                                      Page 3 of 3
                          MERCURIC ACETATE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (Hawley 1981, p. 653)
                       Skin:   Yes  (Hawley  1981, p.  653)
                       Ingestion:  Yes (Sax 1984,  p. 174)

    Health Hazards  (Acute, Delayed,  and Chronic):   It  may  cause  death by
    hypovolemic shock or kidney  failure.  Chronic exposure may lead to kidney
    failure (*Gilman 1980,  -Clayton and Clayton 1981-82).

    Signs and  Symptoms  of Exposure:  General symptoms are those of mercury
    poisoning (Weiss 1980,  p.  579).  It can cause death due to hypovolemic
    shock or renal failure.  Contact with eyes causes redness, pain, blurred
    vision, and ulceration.  Skin  contact may cause redness, pain,  skin burns,
    and dermatitis.   Inhalation  causes a sore throat, coughing, shortness  of
    breath, labored breathing, and headaches.  Ingestion causes pain,
    vomiting,  ulceration of mouth  and stomach, metallic taste, rapid/weak
    pulse, abdominal pain,  diarrhea, ashen-gray appearance of the mouth, and
    kidney failure (*Gilman 1980,  *Doull 1980; '''Clayton and Clayton 1981-82;
    Weiss  1980, p.  579; BASE 1980, p. 613, Oilman 1985, p.  1611).

    Medical Conditions  Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air; call
    emergency medical care.  Remove and isolate contaminated clothing and
    shoes  at the site.   In  case  of contact with material,  immediately flush
    skin or eyes with running  water for at least 15 minutes (DOT 1984,  Guide
    53).
SECTION  VI  --  USE  INFORMATION

    Chiefly for  mercuration of organic compounds; for the absorption of
    ethylene  (Merck 1983, p.  839),. as a chemical intermediate for
    ph.enylmercurie acetate, a mildewicide and other organomercury compounds
    (*SRI); catalyst  in  organic synthesis; and in the manufacture of
    Pharmaceuticals (Hawley 1981,  p. 653)


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be  Taken in Case Material is Released or Spilled)

    Wear protective clothing  and goggles.  Avoid breathing dusts (see Section
    V above).   If material is not  involved in fire, keep material out of water
    sources and  sewers (Student 1981, p. 324).  Do not touch spilled material;
    stop leak if you  can do so without risk.  Small spills:   absorb with sand
    or other  noncombustible absorbent material and place into containers for
    later disposal.   Small dry spills:  with clean shovel place material into
    clean, dry container and  cover; move containers from spill area.  Large
    spills:  Dike far ahead of spill for later disposal (DOT 1984, Guide 53).

-------
                                     CAS Registry  Number:  1622-32-8
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31, 1985
                                                  Revision:
CHEMICAL IDENTITY -- ETHANESULFONYL CHLORIDE,  2-CHLORO-

CAS Registry  Number:  1622-32-8

Synonyms:  (SANSS 1983  Synonyms)  beta-Chloroethanesulfonyl Chloride;
2-Chloroethane Sulfochloride;  2-Chloroethanesulfonic Acid Chloride;
2-Chloroethanesulfonyl Chloride;  2-Chloroethylsulfonyl Chloride

Chemical Formula:   C  H.C1 0 S

Molecular Weight:  163


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  LC,.-  inhalation
    (mouse) 0.25 mg/liter/4  hours  (*NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   392-397°F, 200-203°C  (Weast 1978,  p.  C-295)

    Specific Gravity (H20=l):  1.55 at 20°C/4°C (Weast 1978, p. C-295)

    Vapor Pressure (mmHg):   Not  Found

    Melting Point:   Not  Found

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not Found

    Solubility  in Water:   Decomposes in water (Weast 1978, p.  C-295)

    Appearance and Odor:  Not Found

-------
                                     CAS Registry Number:   1622-32-8
                                     Page 2 of 3
                ETHANESULFONYL CHLORIDE,  2-CHLORO-


SECTION III -- FIRE AND EXPLOSION HAZARD  DATA

    Flash Point (Method Used):  Not  Found
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Not Found

    Special Fire Fighting Procedures:   Not Found

    Unusual Fire and Explosion Hazards:   Not  Found


SECTION IV -- REACTIVITY DATA

    Stability:  Unstable:   Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:  Not  Found
                              May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found


SECTION V -- HEALTH  HAZARD DATA

    Routes  of  Entry:  Inhalation:  Not Found
                     Skin:  Not Found
                     Ingestion:  Not Found

    Health Hazards  (Acute, Delayed, and Chronic):  Not Found

    Signs and Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated by  Exposure:  Not Found

    Emergency and  First Aid Procedures:  Not Found

-------
                                      CAS Registry Number:  1622-32-8
                                      Page 3  of 3
                ETHANESULFONYL CHLORIDE,  2-CHLORO-
SECTION VI  -- USE INFORMATION

    Not Found
SECTION VII -- PRECAUTIONS FOR  SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    Not Found
COMMENTS:

    Sources  searched but no information  found:
        NIOSH/RTECS 1983
        ACGIH  1983
        NIOSH/OSHA 1978
        Hawley 1981
        Merck  1983
        Sax  1984
        DOT  1984
        NFPA 1984
        Student 1981
        Weiss  1980
        CHRIS  1978
        Doull  1980
        Clayton and Clayton 1981-82
        Arena  1979
        Gosselin 1984
        Encyc  Occupat Health and Safety  1983
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes  1982
        Physicians' Desk Reference 1985
        Oilman 1985

-------
                                     CAS Registry Number:   1642-54-2
                                     Page 1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- DIETHYLCARBAMAZINE CITRATE

CAS Registry Number:   1642-54-2

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 3,  page 185)
1-Piperazinecarboxamide, N,N-Diethyl-4-Methyl-, Citrate (1:1); Banocide;
Caricide;  Caritrol; Cypip;  Dicarocide; Diethylcarbamazine Acid Citrate;
Diethylcarbamazane Citrate; Diethylcarbamazine Hydrogen Citrate;
l-Diethylcarbamoyl-4-Methylpiperazine Dihydrogen Citrate;
N,N-Diethyl-4-Methyl-l-Piperazinecarboxaraide Citrate;
N,N-Diethyl-4-Methyl-l-Piperazinecarboxamide Dihydrogen Citrate; Ditrazin;
Ditrazine;  Ethodryl Citrate; Franocide; Franozan; Hetrazan; Loxuran;
1-Piperazinecarboxamide, N,N-Diethy1-4-Methyl-, 2-Hydroxy-l,2,3-Propanetri-
carboxylate

Chemical Formula:   C...H01N0O.C,H00^
                    1U  Zl  J   DO/

Molecular Weight:  391.48


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LCe:0 inhalation

    (rat)  0.309 mg/liter/4  hours (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not  Found

    Specific Gravity (H20=l):  Not Found

    Vapor  Pressure (mmHg):  Not Found

    Melting Point:   286-289°F, 141-143°C (Merck 1983, p. 453)

    Vapor  Density (AIR=l):   Not Found

-------
                                     CAS Registry Number:  1642-54-2
                                     Page 2 of 4
                   DIETHYLCARBAMAZINE CITRATE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:  Soluble  (Merck 1983,  p,  453)

    Appearance  and Odor:   Crystalline solid  (Merck  1983, p. 453);  scored
    white  tablets (Physician's Desk Reference,  1980,  p. 979)


SECTION  III  --  FIRE  AND  EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        DEL:  Not Found

    Extinguishing Methods:  Not Found

    Special Fire  Fighting Procedures:  Not Found

    Unusual Fire and  Explosion Hazards:  Not Found


SECTION  IV --  REACTIVITY DATA

    Stability:  Unstable:  Not  Found
                Stable: Not Found

        Conditions to  Avoid:  Decomposing heat (Sax 1984, p. 1006)

    Incompatibility (Materials  to Avoid):   Not  Found

    Hazardous Decomposition or Byproducts:   When  heated to decomposition,
    it emits toxic fumes of nitrogen oxides (Sax  1984, p. 1006).

    Hazardous Polymerization:   May Occur:  Not Found
                              May Not  Occur:  Not Found

        Conditions to  Avoid:  Not Found


SECTION  V -- HEALTH HAZARD  DATA

    Routes of  Entry:   Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Yes (Sax 1984, p.  1006)

-------
                                      CAS Registry Number:  1642-54-2
                                      Page 3 of 4
                    DIETHYLCARBAMAZINE CITRATE
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Health Hazards (Acute, Delayed,  and Chronic):   (Non-Specific -- Drugs,
    n.o.s.)  May be fatal  if inhaled, swallowed or absorbed through  skin.
    Contact may cause burns to skin and eyes.   Fire may produce  irritating or
    poisonous gases.  Runoff from fire control or dilution water may cause
    pollution (DOT 1984, Guide 11).  The average adult man tolerates a single
    dose of 1.5 gm without ill effects (Gosselin 1984, p.  11-388).

    Signs "and  Symptoms of Exposure:  Untoward reactions include nausea,
    vomiting, headache, weakness, and (as seen in dogs) muscle tremors and
    convulsions (Gosselin  1984, p. 11-388).

    Medical Conditions Generally Aggravated by Exposure:   Not  Found

    Emergency and First Aid  Procedures:  (Non-Specific -- Drugs, n.o.s.)
    Move victim to fresh air; call emergency medical care.   If not breathing,
    give artificial respiration.  If breathing is difficult,  give oxygen.  In
    case of contact with material, immediately flush skin  or eyes with running
    water for at least 15 minutes.  Remove and isolate contaminated  clothing
    and shoes at the site.  Keep victim quiet  and maintain normal body
    temperature (DOT 1984, Guide 11).


SECTION  VI -- USE INFORMATION

    Used against filariasis in man and animals.  Especially popular  in
    veterinary medicine  (Gosselin 1984, p. 11-388).


SECTION  VII --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    (Non-Specific -- Drugs, n.o.s.)  Shut off ignition sources;  no  flares,
    smoking or flames in hazard area.  Keep combustibles (wood,  paper, oil,
    etc.)  away from spilled material.  Do not  touch spilled material.  Small
    spills:  take up with  sand or other noncombustible absorbent material  and
    place into containers  for later disposal.   Large spills:  dike  far ahead
    of spill for later disposal.  Keep unnecessary people  away;  isolate  hazard
    area and deny entry.   Stay upwind; keep out of low areas. Wear
    self-contained (positive pressure is available) breathing apparatus  and
    full protective clothing (DOT 1984, Guide 11).

-------
                                      CAS  Registry Number:  1642-54-2
                                      Page 4 of 4
                   DIETHYLCARBAMAZINE  CITRATE
COMMENTS:

    Sources  searched but no information  found:
        ACGIH  1983
        NIOSH/OSHA 1978
        Hawley 1981
        Weast  1979
        NFPA 1984
        Student 1981
        Weiss  1980
        CHRIS  1978
        Doull  1980
        Clayton and Clayton 1981-82
        Arena  1979
        Encyc  Occupat Health and Safety  1983
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes  1982
        Oilman 1985

-------
                                          CAS Registry Number:  1752-30-3
                                          Page 1 of 3
                       EPA CHEMICAL  PROFILE
                                                  INTERIM
                                                  Date: October 31,  1985
                                                  Revision:
CHEMICAL  IDENTITY -- ACETONE THIOSEMICARBAZIDE

CAS Registry Number:  1752-30-3

Synonyms:   (NIOSH/RTECS  1983 Synonyms,  Volume 1,  p.  233)  Acetone,
Thiosemicarbazone; Hydrazinecarbothioamide, 2-(l-Methylethylidene)-;
Thiosemicarbazone Acetone

Chemical Formula:  C H N S

Molecular Weight:  131.22


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  LD..   oral  (rat)
    10 mg/kg ("NIOSH/RTECS 1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H 0=1): Not Found

    Vapor Pressure (mmHg):  Not Found  .

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl  acetate=l):  Not  Found

    Solubility in Water.-  Not Found

    Appearance and Odor:  Not Found

-------
                                           CAS Registry Number:   1752-30-3
                                           Page 2 of 3
                    ACETONE THIOSEMICARBAZIDE
SECTION  III  --  FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing  Methods:  Not Found

    Special Fire  Fighting  Procedures:  Not Found

    Unusual Fire and Explosion Hazards:  When heated to decomposition, it
    emits  very toxic fumes of  nitrogen oxides and sulfur  oxides (Sax 1984,  p.
    2576).


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not  Found
                Stable:  Not Found

        Conditions to Avoid:  Decomposing heat (Sax 1984, p.  2576)

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated to  decomposition,
    it  emits very toxic fumes  of nitrogen oxides and sulfur oxides (Sax 1984,
    p,  2576).

    Hazardous Polymerization:   May Occur:   Not Found
                              May Not Occur:  Not found

        Conditions to Avoid:  Not  Found


SECTION  V -- HEALTH HAZARD  DATA

    Routes of Entry:   Inhalation:  Not Found
                      Skin:  Not  Found
                      Ingestion:  Yes (Sax 1985,  p.  2576)

    Health  Hazards (Acute,  Delayed,  and Chronic):  High oral toxicity  (Sax
    1984,  p.  2576).

    Signs  and Symptoms of  Exposure:   Not  Found

-------
                                          CAS Registry Number:  1752-30-3
                                          Page 3 of 3
                    ACETONE  THIOSEMICARBAZIDE


SECTION V  -- HEALTH HAZARD DATA  (Continued)

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Not Found


SECTION VI -- USE INFORMATION

    Not Found
SECTION VII -- PRECAUTIONS FOR SAFE  HANDLING AND USE
(Steps  to be Taken in Case Material is Released or Spilled)

    Not Found
COMMENTS

    Sources searched but no information found:
       Weast 1979
       Merck 1983
       Hawley 1981
       Hayes 1982
       Farm Chemicals  Handbook 1984
       Encyc Occupat Health and Safety 1983
       Verschueren 1983
       Gosselin 1984
       Clayton and Clayton 1981-82
       DOT 1984
       Student 1981
       Buchel 1983
       Weiss 1980
       CHRIS 1978
       DOT 1984
       NFPA 1984
       Doull 1980
       Arena 1979

-------
                                      CAS Registry Number:  1910-42-5
                                      Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31,  1985
                                                    Revision:
CHEMICAL IDENTITY -- PARAQUAT

CAS Registry Number:   1910-42-5

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume  1, p. 719)
4,4'-Bipyridinium,  1,1'-Dimethyl-,  Dichloride;  Bipyridinium, 1,l'-Dimethyl-
4,4'-,  Dichloride;  Crisquat; Dextrone-X;  Dexuron; N,N*-Dimethyl-4,41-
Bipyridynium Dichloride; N,N'-Dimethyl-4,4'-Bipyridylium Dichloride;
1,I1-Dimethyl-4,4'-Bipyridynium Dichloride;  4,4'-Dimethyldipyridyl Dichloride;
1,1'-Dimethyl-4,41-Dipyridylium Chloride;  N.N1-Dimethyl-4,4'-Dipyridylium
Dichloride;  Esgram; Gramonol;  Gramoxone;  Gramoxone S; Gramuron;
Methylviologen;  Methyl Viologen (Reduced);  Ortho Paraquat Cl; Para-Col;
Paraquat Chloride;  Paraquat Cl; Paraquat,  Dichloride; Pathclear;  Pillaquat;
Pillarxone;  Terraklene; Totacol; Toxer Total;  Viologen, Methyl-;  Weedol

Chemical Formula:  C12H14N2«2C1

Molecular Weight:   257.18


SECTION I  -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   0.5 mg/m3 (NIOSH/OSHA 1978, p.  146)

    ACGIH TLV:  TWA  0.1  mg/m3  (ACGIH 1983, p. 28)

    IDLH:   1.5  mg/m3 (NIOSH/OSHA 1978, p.  146)

    Other Limits Recommended: Maximum air  concentration (Bulgaria) 0.01
    mg/m3 (Encyc Occupat Health and Safety 1983, p.  1037)


SECTION II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling  Point:  Not  Found

    Specific Gravity (H 0=1):   Not  Found

    Vapor Pressure (mmHg):  Approximately 0 (NIOSH/OSHA 1978, p.  146)

    Melting  Point:  Decomposes  572°F,  300°C  (Merck 1983,  p.  1009)

-------
                                      CAS Registry Number:   1910-42-5
                                      Page 2 of 4
                             PARAQUAT


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl  acetate=l):  Not Found

    Solubility  in Water:  Very soluble  in water  (ACGIH 1980, p. 319)

    Appearance and  Odor:  Colorless  to yellow crystalline solid (Farm
    Chemicals  Handbook  1984, p. C172;  Merck 1983,  p. 1009)


SECTION  III -- FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):   Not  Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing  Methods:  This material  is a bipyridilium compound
    (Buchel  1983, p. 376).  Procedures  for  bipyridilium pesticides are  as
    follows.   Small  fires:  dry chemical, carbon dioxide, water spray,  or
    foam.   Large fires:  water spray,  fog,  or foam.  Move container  from fire
    area if  you can  do so without risk.   Fight  fire from maximum distance.
    Dike fire  control water for later disposal;  do not scatter the material
    (DOT 1984,  Guide 55).

    Special Fire Fighting  Procedures:   Not  Found

    Unusual Fire  and Explosion Hazards:  Not Found


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:   Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):  Strong oxidizers (NIOSH/OSHA
    1978,  p. 146).

    Hazardous  Decomposition or Byproducts:  Not  Found

    Hazardous  Polymerization:   May Occur:   Not Found
                               May Not  Occur:  Not  Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  1910-42-5
                                      Page 3  of 4
                              PARAQUAT
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (Hawley 1981, p. 776)
                       Skin:   Yes  (Hawley  1981, p.  776)
                       Ingestion:  Yes  (Farm Chemicals Handbook 1984,
                                  p. C172)

    Health Hazards  (Acute, Delayed,  and Chronic):   Can cause death due to
    severe injury to the lungs  (Sax  1984, p. 2117).  The lowest lethal oral
    dose reported in humans  is  43 mg/kg  (NIOSH/RTECS 1983, p.  719).

    Signs and Symptoms of Exposure:   Death may occur in 24 hours or less
    due to pulmonary or cerebral hemorrhage, or due to kidney,  liver,  or  heart
    failure.   Severe skin  irritation, blistering and peeling,  occur  especially
    with repeated applications.  Inhalation of sprays causes nose bleeds,
    headache,  coughing, and  sore throat.  Ingestion causes burning discomfort
    or pain in mouth, pharynx,  esophagus and abdomen (substernal or
    epigastric);  prompt and  repeated vomiting with blood; diarrhea with bloody
    stools; headache.  When  smaller  amounts or dilute solutions are  consumed,
    sore throat  and difficulty  in swallowing within 24 hours;  excoriated  lips;
    ulcers of  the tongue,  buccal mucosa  and pharynx have been reported
    (Gosselin  1984,  p.  III-332).

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  For skin and eye irritation flush
    with water immediately;  administer  artificial respiration if necessary
    (NIOSH/OSHA 1978, p.  147).  This material is a bipyridilium compound
    (Buchel 1983, p. 376)  with  the following procedures.  If breathing is
    difficult, give oxygen.   Remove  contaminated clothing at site.  Keep
    victim quiet and maintain normal body temperature.  Keep victim  under
    observation (DOT 1984, Guide 55).


SECTION  VI --  USE INFORMATION

    Contact herbicide and  desiccant  (Farm Chemicals Handbook 1984, p.  C172).

-------
                                      CAS Registry Number:  1910-42-5
                                      Page 4 of 4
                             PARAQUAT
SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken  in Case Material is Released or Spilled)

    (Non-Specific -- Bipyridilium Pesticide)  Keep unnecessary  people away;
    isolate hazard  area and deny entry.  Stay upwind;  keep out  of  low areas.
    Ventilate closed spaces before entering them.   Wear positive pressure
    breathing apparatus and special protective clothing.   Remove and isolate
    contaminated clothing at the site.  If water pollution occurs, notify
    appropriate authorities.  Do not touch spilled material;  stop  leak if you
    can do°so without risk.  Use water spray to reduce vapors.  Small spills:
    absorb with sand or other noncombustible absorbent material and place into
    containers for  later disposal.  Small dry spills:   with clean  shovel place
    material into clean, dry container and cover;  move containers  from spill
    area.   Large spills:  dike far ahead of spill for  later disposal (DOT
    1984,  Guide 55).
COMMENTS

    Sources  searched but no information found:
        Weast  1979
        Weiss  1980
        Student  1981
        DASE 1980
        CHRIS  1978
        Clayton  and Clayton 1981-82
        NFPA 1984

-------
                                            CAS  Registry  Number:  1982-47-4
                                            Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31, 1985
                                                    Revision:
CHEMICAL IDENTITY -- CHLOROXURON

CAS Registry Number:   1982-47-4

Synonyms:  Urea, 3-(p-(p-Chlorophenoxy)Phenyl)-l,1-Dimethyl-;
3-(p-(p-Chlorophenoxy)Phenyl)-l,l-Ditnethylurea;  C1983; Chloroxifenidim;  CIBA
1983; N1-4-(4-Chlorophenoxy)Phenyl-N,N-Ditnethylurea; Norex; Tenoran; Urea,
N'-(4-(4-Chlorophenoxy)Phenyl)-N,N-Dimethyl-

Chemical Formula:  C15H15C1N202

Molecular  Weight:   290.7


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:  Not  Found

    IDLH:  Not  Found

    Other Limits Recommended:   Toxicity information:  LD   oral (dog)  10

    mg/kg  (*NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H 0=1):   1.34 at 20°C  (Worthing 1983)

    Vapor Pressure (mmHg):  1.8 x lo"9 at 20°C  (Worthing  1983, p. 121)

    Melting Point:  304-306°F,  151-152°C  ('^Worthing 1979)

    Vapor Density  (AIR=1):  Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility in Water:  3.7 mg/liter at 20°C and pH  7  (*Spencer 1973)

    Appearance  and Odor:  Colorless powder (Worthing  1983).  White crystals
    ('•Spencer 1973).  Odorless  ("Weed Science Society of America 1979).

-------
                                            CAS Registry Number:  1982-47-4
                                            Page 2 of 3
                           CHLOROXURON
SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:  Non-flammable (*Weed Science Society of America  1979)
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:   (Non-Specific -- Pesticide,  Solid, n.o.s.)  For
    small  fires,  use dry  chemical, carbon dioxide, water spray, or  foam.  For
    large  fires,  use water  spray, fog, or foam (DOT 1984, Guide 53).

    Special  Fire Fighting Procedures:  (Non-Specific -- Pesticide,  Solid,
    n.o.s.)   Avoid breathing  vapors or dust.  Wear self-contained  (positive
    pressure if available)  breathing apparatus and full protective  clothing
    (DOT 1984,  Guide 53).

    Unusual Fire and Explosion Hazards:   (Non-Specific  -- Pesticide,  Solid,
    n.o.s.)   Fire may produce irritating or poisonous gases (DOT  1984,  Guide
    53).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (*Spencer 1973)

        Conditions  to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated to decomposition it
    emits  very  toxic fumes of   .lorides and nitrogen oxides  (Sax  1984, p. 753)

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found


SECTION  V --  HEALTH  HAZARD  DATA

    Routes of Entry:   Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Yes (Sax 1984,  p.  753)

-------
                                            CAS Registry Number:   1982-47-4
                                            Page 3 of 3
                           CHLOROXURON
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Health Hazards (Acute, Delayed,  and Chronic):  This is highly toxic by
    ingestion (Sax  1984, p. 753).  Under certain conditions,  chloroxuron will
    form carcinogenic dimethylnitrosamine (*Egert and Greim,  Food Cosmetic
    Toxicology 14(3)193(1976)).

    Signs and Symptoms of Exposure:  Not Found

    Medical  Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency and First Aid  Procedures:   Safest decontaminant is water with
    soap.   If any question of exposure, skin  decontamination  should be
    thorough.   Eye  exposure:  irrigate eyes with plain tap water  (*Rumack 1975
    to Present).  Use caution with this material (Farm Chemicals Handbook
    1984,  p. C-220).


SECTION  VI --  USE INFORMATION

    Selective pre-  and early post-emergence herbicide in soybeans,
    strawberries, various vegetable crops and ornamentals  (""Spencer 1973).
    Root-  and foliage-absorbed herbicide selective in leek, celery, onion,
    carrot and strawberry  (Buchel 1983, p.  353).  Herbicidal  urea (Hayes 1982,
    p. 540).  Selective  herbicide (Farm Chemicals Handbook 1984, p. C-220).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken  in Case Material is Released or Spilled)

    (Non-Specific -- Pesticide, Solid, n.o.s.)  Do not touch  spilled material;
    stop leak if you can do it without risk.   Use water spray to  reduce
    vapors.   Small  spills:  take up with sand or other noncombustible
    absorbent material and place into containers for  later disposal.  Small
    dry spills:  with clean shovel place material into clean,  dry container
    and cover; move containers from spill area.  Large spills:  dike far ahead
    of spill for later disposal (DOT 1984,  Guide 53).

-------
                                           CAS Registry Number:   2001-95-8
                                           Page  1 of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  VALINOMYCIN

CAS Registry  Number:  2001-95-8

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume 3, page 905)  Antibiotic
N-329 B;  Valinomicin

Chemical  Formula:   CC/H_.N,010
                    JH yu o its
Molecular Weight:  1111.50


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity  information:  LD,.- oral (mouse)
    2.5 mg/kg  (*NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H.0=l):  Not  Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   374°F, 190°C (Merck 1983, p. 1417)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:   Practically insoluble  (Merck 1983,  p.  1417)

    Appearance and Odor:   Shiny crystalline solid (Merck 1983, p.  1417)

-------
                                      CAS Registry Number:  2001-95-8
                                      Page 2 of 4
                           VALINOMYCIN
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  (Non-Specific --  Pesticide,  Solid, n.o.s.)
    Small  fires:   dry chemical, carbon dioxide, water spray,  or foam.  Large
    fires:   water spray,  fog, or foam.  Move container from fire area  if you
    can do so without risk.  Fight fire from maximum distance.  Dike fire
    control water for later disposal; do not scatter the  material  (DOT 1984,
    Guide  55).

    Special  Fire Fighting Procedures:  (Non-Specific -- Pesticide, Solid,
    n.o.s.)  Keep unnecessary people away; isolate hazard area and deny
    entry.   Stay upwind;  keep out of low areas.  Ventilate closed spaces
    before entering  them.  Wear positive pressure breathing apparatus  and
    special protective clothing.  Remove and isolate contaminated clothing at
    the site (DOT 1984, Guide 55).

    Unusual  Fire and Explosion Hazards:  When heated to decomposition,  it
    emits  toxic fumes of  nitrogen oxides (Sax 1984,  p.  2717).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:   Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous  Decomposition or Byproducts:  Nitrogen oxides (Sax 1984, p.
    2717)

    Hazardous  Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Yes (Sax 1984,  p.  2717)

-------
                                      CAS Registry Number:  2001-95-8
                                      Page 3 of 4
                            VALINOMYCIN
SECTION  V -- HEALTH HAZARD DATA (Continued)

    Health Hazards (Acute, Delayed,  and Chronic):  This material is highly
    toxic  orally (Sax  1984, p. 2717).

    Signs and Symptoms of Exposure:   Not Found

    Medical  Conditions  Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid  Procedures:  (Non-Specific -- Pesticide,  Solid,
    n.o.s.)   Move victim to fresh air; call emergency medical care.  If not
    breathing,  give artificial respiration.  If breathing is difficult, give
    oxygen.   In case of contact with material, immediately  flush skin or eyes
    with running water  for at least 15 minutes.  Speed in removing  material
    from skin is of extreme importance.  Remove and isolate contaminated
    clothing and shoes  at the site.  Keep victim quiet and  maintain normal
    body temperature.   Effects may be delayed; keep victim  under observation
    (DOT 1984,  Guide 55).


SECTION  VI --  USE INFORMATION

    This material is used as an  insecticide and nematocide  (Merck 1983, p.
    1417).  Not registered as a pesticide in the U.S. (USEPA/Pesticide  Index
    1985).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to  be Taken in Case Material is Released or Spilled)

    (Non-Specific -- Pesticide,  Solid, n.o.s.)  Keep unnecessary people away;
    isolate  hazard area and deny entry.  Stay upwind; keep  out of low areas.
    Ventilate closed spaces before entering them.   Wear positive pressure
    breathing apparatus and special protective clothing.  Remove and isolate
    contaminated clothing at the site.  Do not touch spilled material;  stop
    leak if  you can do  so without risk.  Small spills:  absorb with sand or
    other  noncombustible absorbent material and place into  containers for
    later  disposal.  Small dry spills:  with clean shovel place material into
    clean, dry container and cover; move containers from spill area.  Large
    spills:   dike far ahead of spill for later disposal (DOT 1984,  Guide 55).

-------
                                      CAS Registry Number:  2001-95-8
                                      Page 4 of 4
                           VALINOMYCIN
COMMENTS:

    Sources searched  but no  information found:
        ACGIH 1983
        NIOSH/OSHA  1978
        Hawley 1981
        Weast 1979
        NFPA 1984
        Student 1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton and Clayton  1981-82
        Arena 1979
        Gosselin 1984
        Encyc Occupat Health and Safety 1983
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes 1982
        Physicians' Desk Reference 1985
        Oilman 1985

-------
                                            CAS  Registry  Number:  2032-65-7
                                            Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31, 1985
                                                    Revision:
CHEMICAL IDENTITY -- METHIOCARB

CAS Registry Number:   2032-65-7

Synonyms:  3,5-Dimethyl-4-(Methylthio)Phenol Methylcarbamate;  3,5-Dimethyl-
4-(Methylthio)Phenyl Methylcarbamate; 3-5-Dimethyl-4-Methylmercaptophenyl-N-
Methylcarbamate;  3,5-Dimethyl-4-Methylthiophenyl  N-Methylcarbamate;
3,5-Xylenol,  4-(Methylthio)-, Methylcarbamate;  4-(Methylthio)-3,5-Xylyl
Methylcarbamate;  4-Methylmercapto-3,5-Dimethylphenyl N-Methylcarbamate;
4-Methylmercapto-3,5-Xyly1 Methylcarbamate;  4-Methylthio-3,5-DimethyIpheny1
Methylcarbamate;  B 37344; Bay 37344; Bay 5024;  Bay 9026; Bayer 37344; Carbamic
Acid, Methyl-,  3,5-Dimethyl-4-(Methylthio)Phenyl  Ester; Carbamic Acid,
Methyl-,4-(ethylthio)-3,5-Xylyl Ester; DCR 736; DRAZA; ENT 25,726; H 321;
Mesurol;  Methyl Carbamic Acid 4-(Methylthio)-3,5-Xylyl Ester; Metmercapturon;
OMS-93; Phenol, 3,5-Dimethyl-4-(Methylthio)-,  Methylcarbamate; SD 9228

Chemical Formula:  C  H  NO-S

Molecular Weight:  225.3


SECTION I --  HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not  Found

    IDLH:  Not Found

    Other Limits  Recommended:  Toxicity information:  LD^_ oral (rat) 15

    mg/kg (-NIOSH/RTECS  1985)


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity (H 0=1):   Not  Found
                                  -4
    Vapor Pressure  (mmHg):   1 x 10   (Farm Chemicals Handbook  1984,
    p. C145)

    Melting Point:  243°F,  117°C (^Worthing  1979)

-------
                                            CAS Registry Number:  2032-65-7
                                            Page 2 of 4
                           METHIOCARB
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Vapor Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found
                                _3
    Solubility  in Water:  2.7 x 10   g/100 g water (-Farm Chemicals
    Handbook 1984)

    Appearance and Odor:  White crystalline powder ("Spencer 1982).   Mild
    odor (''"Farm Chemicals Handbook 1984) .


SECTION  III -- FIRE AND  EXPLOSION HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing  Methods:  This compound is a carbamate  insecticide  (Encyc
    Occupat  Health  and Safety 1983, p. 1624).  Extinguish with dry  chemical,
    carbon dioxide,  water spray, fog, or foam (DOT 1984, Guide 55).

    Special  Fire Fighting Procedures:  This compound is a solid carbamate
    insecticide (Buchel  1983, p. 129).  Keep unnecessary people away;  isolate
    hazard area and  deny entry.  Stay upwind; keep out of low areas.
    Ventilate  closed spaces before entering them.  Wear positive pressure
    breathing  apparatus  and special protective clothing.  Remove and  isolate
    contaminated clothing at the site.  Move container from fire area if you
    can do it  without risk.  Fight fire from maximum distance.  Dike  fire
    control  water  for later disposal; do not scatter the material (DOT 1984,
    Guide  55).

    Unusual Fire and Explosion Hazards:   Not Found


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                Stable:  Not Found

        Conditions  to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous  Decomposition or Byproducts:  When heated to decomposition,
    it emits very  toxic  fumes of nitrogen and sulfur oxides (Sax 1984, p.
    1177).

-------
                                            CAS Registry Number:  2032-65-}
                                            Page 3 of 4


                           METHIOCARB

SECTION  IV — REACTIVITY DATA  (Continued)

    Hazardous  Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:   Not  Found


SECTION  V --  HEALTH HAZARD  DATA

    Routes of Entry:   Inhalation:  Yes (Sax 1984, p.  1177)
                     .Skin:   Yes  (Sax 1984, p.  1177)
                       Ingestion:   Yes (Sax 1984, p.  1177)

    Health Hazards  (Acute, Delayed,  and  Chronic):  As a  carbamate
    insecticide,  this compound  is  a reversible cholinesterase inhibitor and
    acts on the nervous system.  It is classified as very toxic,  and the
    probable oral lethal dose  for  humans is 50-500 mg/kg or between 1 teaspoon
    and 1 ounce for a 150 Ib.  adult (Gosselin 1984,  p. 11-307).

    Signs and  Symptoms  of Exposure:  Symptoms  include  salivation, slowed
    heartbeat,  spontaneous  urination and defecation,  labored breathing,
    headache, blurred vision,  tremor, slight paralysis, and muscle twitching.
    In severe poisoning,  unconsciousness and convulsions may occur.  Nausea,
    vomiting, diarrhea, and abdominal pain may be noted (*Rumack  .1975 to
    Present).

    Medical  Conditions  Generally Aggravated by  Exposure:  Not Found

    Emergency  and  First Aid  Procedures:  This compound is a solid carbamate
    insecticide (Buchel 1983, p. 129).  Move victim to fresh air; call
    emergency medical care.  If not breathing, give artificial respiration.
    If breathing is difficult,  give oxygen.  In case of contact with material,
    immediately flush skin  or  eyes with running water for at least 15
    minutes. Speed in  removing material from skin is of extreme  importance.
    Remove and  isolate  contaminated clothing and shoes at the site.  Keep
    victim quiet and maintain normal body temperature.  Effects may be
    delayed; keep victim under  observation (DOT  1984, Guide 55).

-------
                                            CAS Registry Number:  2032-65-7
                                            Page 4 of 4
                            METHIOCARB
SECTION  VI --  USE  INFORMATION

    Insecticide  and immobilizing  agent  for birds  (*Rossoff 1974), acaricide
    and molluscicide  ("Worthing 1979)


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING  AND USE
(Steps to be Taken in Case  Material is  Released or Spilled)

    Avoid inhalation  of  material  (see Section V above).  This compound is a
    solid carbamate insecticide (Buchel 1983, p.  129).  Do not touch spilled
    material;  stop leak  if  you can do so without  risk.  Use water spray to
    reduce vapors.   Small spills:  absorb with sand or other noncombustible
    absorbent material and  place  into containers  for later disposal.  Small
    dry spills:   With clean shovel, place material into clean, dry container
    and cover; move containers from spill area.   Large spills:  Dike far ahead
    of spill for later disposal.  Keep  unnecessary people away; isolate hazard
    area and deny entry.  Stay upwind;  keep out of low areas.  Ventilate
    closed spaces before entering them.  Wear positive pressure breathing
    apparatus  and special protective clothing.  Remove and isolate
    contaminated clothing at the  site.   In case of contact with material,
    immediately  flush skin  or eyes with running water for at least 15 minutes
    (DOT 1984, Guide  55).

-------
                                     CAS Registry Number:  2074-50-2
                                     Page  1  of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- PARAQUAT  METHOSULFATE

CAS Registry Number:   2074-50-2

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 1, p. 719)
4,4'-Bipyridlnium, 1,l'-Dimethyl-,  bis(Methyl Sulfate);  1,1'-Dimethyl-
4,4'-Bipyridynium Dimethylsulfate;  1,1'-Dimethyl-4,41-Dipyridinium Di(Methyl
Sulfate);  Gramoxone Methyl Sulfate; Paraquat bis(Methyl  Sulfate); Paraquat
Dimethyl Sulfate; Paraquat Dimethyl Sulphate; PP 910

Chemical Formula:   C12H14N2*(CH3°4S)2

Molecular  Weight:  408.48


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  0.5 mg/m3 (NIOSH/OSHA  1978, p. 146)

    ACGIH TLV:   (For Paraquat) TWA 0.1 mg/m3  (respirable sizes)  (ACGIH
    1985,  p.  26)

    IDLH:  1.5 mg/m3 (NIOSH/OSHA 1978, p. 146)

    Other Limits Recommended:  Maximum Air Concentration (Bulgaria) 0.01
    mg/m3; TLV:  0.1 mg/m3 (respirable  sizes) (Encyc Occupat  Health and
    Safety 1983, p. 1037)


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Decomposes at 347-356°F,  175-180°C (NIOSH/OSHA  1978, p.
    146)

    Specific  Gravity  (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Approximately 0 (NIOSH/OSHA 1978, p. 146)

    Melting Point:   Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

-------
                                      CAS Registry Number:   2074-50-2
                                      Page 2 of 4
                       PARAQUAT METHOSULFATE


SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS (Continued)

    Solubility  in Water:  Soluble (Hawley 1981,  p.  776)

    Appearance and Odor:  White crystalline solid  (Farm Chemicals Handbook
    1984,  p. C172); yellow solid (Merck 1983, p.  1009)


SECTION  III  --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing  Methods:   Not combustible  (NIOSH/OSHA 1978, p. 146).
    (Non-Specific  -- Pesticide, Solid, n.o.s.)  Extinguish with dry chemical,
    carbon dioxide, water spray, fog,  or foam (DOT 1984, Guide 53).

    Special Fire Fighting  Procedures:   (Non-Specific  -- Pesticide, Solid,
    n.o.s.)  Keep  unnecessary people away;  isolate hazard area and deny
    entry.  Stay upwind; keep out of low areas.   Wear self-contained (positive
    pressure if available) breathing apparatus  and full protective clothing.
    Move container from fire area if you can  do so without risk  (DOT 1984,
    Guide  53).

    Unusual Fire and Explosion Hazards:  When heated to  decomposition, it
    emits  very toxic fumes of sulfur oxides and nitrogen oxides  (Sax 1984,  p.
    2118).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Strong  oxidizers (NIOSH/OSHA
    1978,  p. 146)

    Hazardous Decomposition or Byproducts:   When heated to decomposition,
    it emits very  toxic fumes of sulfur oxides  and nitrogen oxides (Sax 1984,
    p. 2118).

-------
                                      CAS Registry Number:   2074-50-2
                                      Page 3 of 4
                       PARAQUAT METHOSULFATE
SECTION  IV  --  REACTIVITY DATA (Continued)

    Hazardous Polymerization:  May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes (Hawley 1981, p. 776)
                      Skin:  Yes (Hawley 1981, p.  776)
                      Ingestion:   Yes (Sax  1984, p. 2118)

    Health Hazards (Acute,  Delayed,  and Chronic):  It can cause death  by
    shock  and/or pulmonary damage.   The fatal  dose  is estimated to be 6 grams
    of paraquat ion.  Exposure may cause renal tubular damage and liver
    dysfunction (Encyc Occupat Health and Safety 1983, p.  1037).

    Signs  and Symptoms of  Exposure:  Death may occur  in 24  hours or  less.
    Contact causes  irritation.  Inhalation causes nose bleeds, headaches,
    coughing, and a sore throat.  Swallowing causes burning in mouth, throat,
    and abdomen, vomiting, bloody vomitus, diarrhea with bloody stools, and
    headaches  (NIOSH/OSHA 1978, p.  146; Hayes  1982, p. 552; Encyc Occupat
    Health and Safety 1983,  p. 1037; Gosselin  1984, p. III-333).

    Medical  Conditions Generally Aggravated by Exposure:  Not Found

    Emergency  and First Aid  Procedures:   (Non-Specific  -- Pesticide,  Solid,
    n.o.s.)  Move victim to fresh air; call  emergency medical care.   In case
    of contact with material, immediately flush skin or eyes with running
    water  for at least, 15 minutes.   Remove and isolate contaminated clothing
    and shoes at the site (DOT T984, Guide 53).
SECTION  VI  --  USE INFORMATION

    Contact herbicide and desiccant  (Farm Chemicals Handbook 1984, p. C172).

-------
                                      CAS  Registry Number:  2074-50-2
                                      Page 4 of 4
                       PARAQUAT METHOSULFATE


SECTION  VII -- PRECAUTIONS FOR SAFE  HANDLING AND USE
(Steps to  be Taken in Case Material is Released  or Spilled)

    (Non-Specific -- Pesticide, Solid, n.o.s.)   Keep  unnecessary people away;
    isolate hazard area and deny entry.   Stay upwind; keep out of low areas.
    Wear self-contained (positive pressure  if available) breathing apparatus
    and full protective clothing.  Do not touch  spilled material; stop leak if
    you can do so without risk.  Small spills:   absorb with sand or other
    noncombustible absorbent material and place  into  containers for later
    disposal.  Small dry spills:  with clean shovel place material into clean,
    dry container and cover; move containers from spill area.  Large spills:
    dike far ahead of spill for later disposal  (DOT 1984, Guide 53).

-------
                                     CAS Registry Number:  2097-19-0
                                     Page  1 of 3
                       EPA CHEMICAL  PROFILE
                                                  INTERIM
                                                  Date: October 31,  1985
                                                  Revision:
CHEMICAL  IDENTITY --  PHENYLSILATRANE

CAS Registry Number:  2097-19-0

Synonyms:   2,8,9-Trioxa-5-Aza-l-Silabicyclo[3.3.3] Undecane,  Phenyl-;
Silatrane, Phenyl-

Chemical  Formula:  C  -H _NO Si

Molecular Weight:  251.39


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD    oral (rat)  1
    mg/kg (*NIOSH/RTECS  1985)


SECTION II  --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H20=l):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:   Not Found

-------
                                           CAS Registry Number:   2097-19-0
                                           Page 2 of 3
                         PHENYLSILATRANE
SECTION  III  --  FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:  Not Found

    Extinguishing  Methods:   Not Found

    Special Fire  Fighting  Procedures:   Not Found

    Unusual Fire and Explosion Hazards:   Decomposes to toxic fumes of
    nitrogen oxides when heated  (Sax  1984, p. 2203).


SECTION  IV --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Decomposing  heat (Sax 1984,  p.  2203).

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition or  Byproducts:  Toxic fumes  of  nitrogen oxides
    when heated  to decomposition  (Sax 1984, p. 2203).

    Hazardous Polymerization:  May Occur:  Not Found
                              May Not Occur:  Not Found

        Conditions to Avoid:  Not  Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Not  Found
                      Skin:  Not  Found
                      Ingestion:  Yes  (Sax 1984,  p. 2203)

    Health Hazards (Acute,  Delayed,  and Chronic):  Highly toxic following
    ingestion by mouth (Sax 1984,  p.  2203).

    Signs  and Symptoms of  Exposure:   Not Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

-------
                                          CAS  Registry Number:  2097-19-0
                                          Page 3 of 3
                        PHENYLSILATRANE


SECTION V -- HEALTH  HAZARD DATA (Continued)

    Emergency and First Aid Procedures:   Not  Found


SECTION VI -- USE INFORMATION

    Not Found
SECTION VII --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps  to be Taken in Case Material is Released or Spilled)

    Not Found
COMMENTS

    Sources searched but no information found:
       Clayton and Clayton 1981-82
       Merck 1983
       Verschueren 1983
       Weast 1979
       Student 1981
       Hawley 1981
       DOT 1984

-------
                                            CAS Registry Number:   2104-64-5
                                            Page 1 of 4
                        EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date:  October 31, 1985
                                                    Revision:
CHEMICAL IDENTITY  -- EPN

CAS Registry Number:  2104-64-5

Synonyms:  Phosphonothioic Acid,  Phenyl-, 0-Ethyl 0-(p-Nitrophenyl)Ester;
Benzenephosphonic  Acid, Thiono-, Ethyl-p-Nitrophenyl  Ester;
Benzenephosphothionic  Acid, Ethyl 4-Nitro-Phenyl Ester;  ENT  17,798; EPN 300;
Ethoxy-4-Nitrophenoxyphenylphosphine Sulfide; Ethyl p-Nitrophenyl
Benzenethionophosphonate; Ethyl p-Nitrophenyl Benzenethiophosphate; Ethyl
p-Nitrophenyl Benzenethiophosphonate; Ethyl p-Nitrophenyl
Phenylphosphonothioate; Ethyl p-Nitrophenyl Thionobenzenephosphate; Ethyl
p-Nitrophenyl Thionobenzenephosphonate; 0-Ethyl 0-(4-Nitrophenyl)
Benzenethionophosphonate; 0-Ethyl 0-(4-Nitrophenyl) Phenylphosphonothioate;
0-Ethyl 0-(p-Nitrophenyl) Phenylphosphonothioate; 0-Ethyl  0-p-Nitrophenyl
Benzenethiophosphonate; 0-Ethyl 0-p-Nitrophenyl Phenylphosphonothiolate;
0-Ethyl 0-p-Nitrophenyl Phenylphosphorothioate; 0-Ethyl  Phenyl p-Nitrophenyl
Thiophosphonate; Phenol, p-Nitro-, 0-Ester with 0-Ethyl  Phenyl
Phosphonothioate;  Phenylphosphonothioate, 0-Ethyl-0-p-Nitrophenyl-;
Phosphonothioic Acid,  Phenyl-, 0-Ethyl 0-(4-Nitrophenyl) Ester; PIN; Santox

Chemical Formula:   C..H..NO.PS
                    14 14  4

Molecular Weight:   323.30


SECTION I --  HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL: Air:  TWA  0.5 mg/m3 (*NIOSH/RTECS 1985)

    ACGIH TLV:   TWA 0.5  mg/m3;  STEL  2.0 mg/m3,  (skin)  (*ACGIH 1983)

    IDLH:  50 mg/m3 (NIOSH/OSHA 1978,  p. 94)

    Other Limits Recommended:  Not Found


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H20=l):   1.268 at 77°F,  25°C  (*Merck 1976)

-------
                                            CAS Registry Number;  2104-64-5
                                            Page 2 of 4
                                EPN
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Vapor  Pressure  (mmHg):  3 x lo"4 at 212°F, 100°C (^Worthing  1979)

    Melting Point:  97°F, 36°C  (*Weast 1979)

    Vapor  Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubifity  in Water:  Insoluble (-Merck 1976)

    Appearance and  Odor:  Light yellow crystalline powder  (*Worthing 1979);
    aromatic odor  (*Merck  1976).


SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing  Methods:  (Non-Specific -- Organophosphorus Pesticide,
    n.o.s.) For small  fires, use dry chemical, carbon dioxide, water spray,
    or foam.   For  large  fires,  use water spray, fog, or foam (DOT 1984, Guide
    55).

    Special Fire Fighting Procedures:  (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)   Stay upwind; keep out  of low areas.   Move containers
    from fire  area if you  can do it without risk.   Fight fire from maximum
    distance.   Dike  fire control water for later disposal; do not scatter the
    material.   Wear  positive pressure breathing apparatus  and special
    protective clothing  (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)  This material may burn but does not  ignite readily.
    Container  may  explode  in heat of fire.  Fire and runoff  from  fire control
    water  may  produce irritating or poisonous  gases (DOT 1984, Guide 55).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                Stable:  Yes (*ACGIH 1980)

        Conditions to Avoid:  Hydrolyzed by alkali  (^Worthing 1979)

-------
                                            CAS Registry Number:  2104-64-5
                                            Page 3 of 4
                                EPN
SECTION  IV --  REACTIVITY DATA  (Continued)

    Incompatibility (Materials to Avoid):  Strong oxidizers (NIOSH/OSHA
    1978,  p. 94)

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not  Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes ("Farm Chemicals Handbook 1983)
                      Skin:   Yes  (-Farm Chemicals Handbook 1983)
                      Ingestion:  Yes (-Farm Chemicals Handbook 1983)

    Health Hazards  (Acute, Delayed,  and Chronic):  This material may be
    fatal  if swallowed.   It is poisonous if inhaled and extremely hazardous  by
    skin contact.   Repeated exposure may, without symptoms, be increasingly
    hazardous (*Farm Chemicals Handbook 1983).  The estimated fatal oral  dose
    is 0.3 grams  for a 150 Ib. (70 kg) person (-Arena 1979).

    Signs and Symptoms of Exposure:   Symptoms may  include nausea, vomiting,
    abdominal cramps, diarrhea,  excessive salivation, headache,  giddiness,
    dizziness, weakness,  muscle  twitching, difficult breathing,  blurring  or
    dimness of vision, and loss  of muscle coordination.  Death may occur  from
    failure of the respiratory center, paralysis of the respiratory muscles,
    intense bronchoconstriction, or all three (*Gosselin 1976).

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  (Non-Specific -- Organophosphorus
    Pesticide, n.o.s.)   Move victim to fresh air; call emergency medical
    care.   If not breathing, give artificial respiration.   If breathing is
    difficult, give oxygen.  In  case of contact with material, immediately
    flush skin or eyes with running water for at least 15 minutes.   Speed in
    removing material from skin  is of extreme importance.   Remove and isolate
    contaminated  clothing and  shoes at the site.    Keep victim quiet and
    maintain normal body temperature.  Effects may be delayed; keep victim
    under observation (DOT 1984, Guide 55).  If material has been ingested,
    induce vomiting with ipecac  (*Morgan 1982).

-------
                                            CAS  Registry  Number:  2104-64-5
                                            Page 4 of 4
                                EPN
SECTION  VI  --  USE INFORMATION

    This material  is used as an insecticide for  cotton  (*SRI) and an acaricide
    (Worthing 1979).


SECTION  VII  -- PRECAUTIONS FOR SAFE  HANDLING AND USE
(Steps  to be  Taken in Case Material  is Released  or Spilled)

    Ventilate area of spill.  Cover  with soda  ash, mix, and spray with water.
    Place in  container of water and  allow to stand for  2 days, then neutralize
    with 6 molar hydrochloric acid (*NIOSH/OSHA  1981).  Wear rubber gloves,
    protective clothing, goggles,  and respirator (Farm  Chemicals Handbook
    1984,  p.  C94).

-------
                                           CAS Registry Number:   2223-93-0
                                           Page 1 of 3
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- CADMIUM STEARATE

CAS Registry Number:   2223-93-0

Synonyms:  Octadecanoic Acid, Cadmium Salt;  Alaixol 11; Cadmium Distearate;
Cadmium Octadecanoate; SCD; Stabilisator SCD; Stabilizer SCD;  Stearic Acid,
Cadmium Salt

Chemical Formula:  C  H O^Cd

Molecular  Weight:  681.48


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   TWA 200 ug (Cadmium)/m3; Ceiling concentration  600 yg
    (Cadmium)/m3  (NIOSH/RTECS 1983,  Volume 2, p. 880)

    ACGIH TLV:   TWA  50 ug  (Cadmium)/m3;  Ceiling  limit 600 ug
    (Cadmium)/m3  (dust)  (NIOSH/RTECS 1983, Volume 2, p.  880)

    IDLH:  Not Found

    Other Limits  Recommended:   Occupational exposure to  cadmium recommended
    standard  -- TWA 40 yg/m3 (cadmium content)  (air); ceiling  200
    Vig/m3/15  minutes (cadmium content)  (*NIOSH/RTECS 1985).  IDLH for
    cadmium dust  40 mg/m3 (NIOSH/OSHA 1978, p. 58).  Toxicity  information:
    LC5Q inhalation  (rat) 0.13 rag/liter/2 hours (*NIOSH/RTECS  1985).


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure  (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):   Not Found

-------
                                           CAS Registry Number:   2223-93-0
                                           Page 2 of 3
                         CADMIUM STEARATE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Evaporation  Rate  (Butyl acetate-=l):   Not  Found

    Solubility  in Water:  Not Found

    Appearance  and Odor:  Not Found


SECTION  III  --  FIRE AND EXPLOSION HAZARD  DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing  Methods:   (Non-Specific --  Cadmium Compound)  For small
    fires,  use dry chemicals,  carbon dioxide,  water spray,  or  foam.  For large
    fires,  use water spray,  fog, or  foam  (DOT 1984, Guide  53).

    Special Fire  Fighting  Procedures:  (Non-Specific -- Cadmium Compound)
    Keep upwind; keep out of low areas.  Wear self-contained  (positive
    pressure if  available) breathing apparatus and full protective clothing
    (DOT 1984, Guide 53).

    Unusual Fire and Explosion Hazards:   It  emits acrid smoke when  heated
    to decomposition (Sax 1984, p.  2079).


SECTION  IV --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated  to decomposition,
    it emits acrid smoke (Sax 1984, p. 2079).

    Hazardous Polymerization:  May Occur:  Not  Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  2223-93-0
                                            Page 3  of 3
                          CADMIUM  STEARATE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (Similar to cadmium) (-Rumack 1975
                                  to Present)
                       Skin:   Not  Found
                       Ingestion:  Yes  (Similar to cadmium) ("Rumack 1975
                                  to Present)

    Health Hazards  (Acute, Delayed,  and Chronic):   Similar to  cadmium;
    acute toxicity most notably  occurs  secondary to cadmium ingestion or
    inhalation of cadmium fumes.   Poisoning from inhalation is relatively rare
    but dangerous, having a mortality rate of about 15 percent (*Rumack 1975
    to Present).   Toxic inhaled  concentrations in humans have been reported at
    147 mg/m3/35  minutes and  at  1800 ug/m3/2 years (*NIOSH/RTECS 1985).

    Signs and  Symptoms of Exposure:   Similar to  cadmium;  acute poisoning
    produces  severe nausea, vomiting, diarrhea, and abdominal and chest
    pains.  Dry mouth,  salivation, and  metallic taste have been reported.
    Yellow rings  may be seen  in  teeth when chronically exposed (*Rumack 1975
    to Present).   If ingested, may result in exhaustion, collapse,  shock, and
    death within  a period of  24  hours (Gosselin 1984, p. 111-82).

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  (Non-Specific -- Cadmium
    Compound)  Move victim to fresh air.  Remove and isolate contaminated
    clothing.  In case  of contact  with  material, immediately flush skin and
    eyes with running water for  at least 15 minutes (DOT 1984,  Guide 53).


SECTION  VI  -- USE INFORMATION

    Lubricant and stabilizer  for polyvinyl chloride (*SRI).  Lubricant and
    stabilizer in plastics (*Hawley 1977).


SECTION  VII --  PRECAUTIONS  FOR SAFE HANDLING AND USE
(Steps to be  Taken in Case Material is  Released or Spilled)

    (Non-Specific -- Cadmium  Compounds)  Do not touch spilled material.   Stay
    upwind;  keep  out of low areas.  Wear self-contained (positive pressure if
    available) breathing apparatus and  full protective clothing.  Take up
    small spills  with sand or other noncombustible absorbent material and
    place into containers for later disposal.  Take up small, dry spills with
    clean shovel  and place into  clean,  dry container.  Dike far ahead of large
    spills for later disposal (DOT 1984, Guide 53).

-------
                                           CAS Registry Number:  2231-57-4
                                           Page 1 of 3
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- THIOCARBAZIDE

CAS Registry Number:  2231-57-4

Synonyms:  l,3-Diamino-2-Thiourea; Carbohydrazide, Thio-; Carbonothioic
Dihydrazide;  Hydrazinecarbohydrazonothioic Acid; TCH;  Thiocarbohydrazide;
Thiocarbonic  Dihydrazide;  Thiocarbonohydrazide; USAF EK-7372

Chemical Formula:   CH,N,S
                     6  4
Molecular  Weight:  106.17


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD1   oral (rat)  10

    mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity  (H  0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   338°F, 170°C -- decomposes  (Weast  1979, p.  C-239)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not Found

    Solubility in Water:   Soluble  (Weast 1984, p. C-219)

    Appearance and Odor:   Crystalline needles and plates  (Weast 1979, p.
    C-239)

-------
                                            CAS Registry Number:   2231-57-4
                                            Page 2 of 3
                         THIOCARBAZIDE
SECTION  111 -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  (Non-Specific --  Poisonous Solid, n.o.s.)
    Extinguish with  dry chemical, carbon dioxide,  water spray, fog, or foam
    (DOT 1984,  Guide 53).

    Special  Fire Fighting  Procedures:  (Non-Specific  -- Poisonous Solid,
    n.o.s.)   Wear self-contained (positive pressure if available) breathing
    apparatus and full protective clothing.   Stay  upwind, keep out of low
    areas.   Move container from fire area if you can  do so without risk (DOT
    1984,  Guide 53).

    Unusual  Fire and Explosion Hazards:  Not Found
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:   When heated to decomposition it
    emits  very toxic fumes of nitrogen oxides and sulfur oxides (Sax 1984, p.
    2568).

    Hazardous Polymerization:   May Occur:   Not Found
                               May  Not  Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Not Found
                      Skin:  Not Found
                      Ingestion:   Yes (Sax 1984, p. 2568)

    Health  Hazards (Acute,  Delayed,  and  Chronic):  High oral toxicity  (Sax
    1984,  p.  2568)

-------
                                            CAS Registry Number:   2231-57-4
                                            Page 3 of 3
                         THIOCARBAZIDE
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Signs and Symptoms of Exposure:  Not Found

    Medical  Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency and First Aid  Procedures:   Treat as  for  general poisoning.
    Establish respiration.  Prevent absorption.   Decontaminate exposed skin
    with water and  soap.  For eye exposure, flush thoroughly with water
    ("Rumack 1975 to Present).  (Non-Specific -- Poisonous  Solid, n.o.s.)
    Move victim  to  fresh air; call emergency  medical care.  Remove and isolate
    contaminated clothing and shoes at the site.  In case of contact with the
    material,  immediately flush skin or eyes  with running wat.er for at least
    15 minutes (DOT 1984, Guide 53).


SECTION  VI --  USE INFORMATION

    Has been tested as a fungicide and pesticide ('"'Peer  Review Committee).  It
    is used in electron microscopy to produce electron-opaque deposits for
    ultrastructural analysis  (*Hoch H.C.;  Planta 147(3)  1979).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken  in Case Material is Released or Spilled)

    (Non-Specific -- Poisonous Solid, n.o.s.)  Do not touch spilled material.
    Small spills:   absorb with sand or other  noncombustible absorbent material
    and place into  containers for later disposal.   Small dry spills:  with
    clean shovel, place material into clean,  dry container  and cover.  Move
    containers from spill area.  Large spills:   dike far ahead of spill for
    later disposal  (DOT  1984, Guide 53).

-------
                                     CAS Registry Number:  2235-25-8
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31,  1985
                                                  Revision:
CHEMICAL IDENTITY --  ETHYLMERCURIC PHOSPHATE

CAS Registry  Number:  2235-25-8

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume 2, p. 663)  Mercury,  Ethyl
(Phosphate (1-))-; Ethylmercury Phosphate; Granosan M; Lignasan;  N.I. Ceresan;
Ruberon;  Soilsin

Chemical  Formula:   C  H HgO P

Molecular  Weight:  326.65


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Air:   TWA 10 yg (Mercury)/m3;  Ceiling Concentration 40
    yg (Mercury)/m3 (NIOSH/RTECS 1983, Volume  2, p. 663)

    ACGIH TLV:   TWA 10 yg (Mercury)/m3; STEL 30yg  (Mercury)/m3
    (skin) (NIOSH/RTECS 1983, Volume 2, p. 663)

    IDLH:  Not Found

    Other Limits Recommended:  IDLH for organo (alkyl) mercury  compounds
    10 mg/m3 (NIOSH/OSHA  1978, p. 144).  Toxicity  information:   LD,   oral
    (human) 8.81 mg/kg ("NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H 0=1):  Not  Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not Found

-------
                                           CAS Registry Number:   2235-25-8
                                           Page 2 of 4
                    ETHYLMERCURIC  PHOSPHATE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Solubility  in Water:  Not Found

    Appearance and  Odor:  Not Found


SECTION  III  -- FIRE AND EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing  Methods:   This  compound is an alkylmercury  fungicide
    (Buchel 1983,  p. 249).  Extinguish  with dry chemical,  carbon  dioxide,
    water  spray, fog, or foam (DOT 1984, Guide 55).

    Special Fire Fighting  Procedures:   This compound is an alkylmercury
    fungicide  (Buchel 1983,  p.  249).  Wear positive pressure breathing
    apparatus  and  special protective clothing.  Move container from fire area
    if you can do  it without risk.  Fight fire from maximum distance.  Dike
    fire control water for later disposal; do not scatter  the  material (DOT
    1984,  Guide 55).

    Unusual Fire  and Explosion  Hazards:  This compound is an alkylmercury
    fungicide  (Buchel 1983,  p.  249).  Container may explode in heat of the
    fire (DOT  1984, Guide 55).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:   Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:  May Occur:   Not  Found
                               May Not Occur:

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry  Number:   2235-25-8
                                            Page 3 of  4
                     ETHYLMERCURIC  PHOSPHATE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes  (Non-Specific  -- Alkyl Mercury
                                   Compounds)  (Encyc  Occupat Health and Safety
                                   1983, p.  1337)
                       Skin:   Yes  (Non-Specific  --  Alkyl Mercury Compounds)
                              (Encyc Occupat Health and Safety 1983, p. 1337)
                       Ingestion:   Yes  (Non-Specific  -- Ethylmercuric
                                   Compounds)  (Hayes  1982, p. 22)

    Health Hazards  (Acute, Delayed, and Chronic):   (Non-Specific -- Alkyl
    Mercury Compound)   This compound is a nervous system toxicant on either
    acute or chronic exposure.   It  is especially hazardous because of its
    persistence in the body and  its transport  to the  brain (Gosselin 1984, p.
    11-136, III-267).   Skin contact with concentrated solutions results in
    irritation and blistering.   Organic mercury compounds have caused fetal
    poisonings in pregnant women.   Poisoning outbreaks have occurred from
    ingestion of grain treated with ethyl mercury or  eating animals fed
    treated grain (Hayes  1982, p. 21-23).  A lowest lethal oral dose of 8805
    Vg/kg for 13 weeks was reported (NIOSH/RTECS 1983, Volume 2,
    p.  663).

    Signs and  Symptoms of Exposure:   (Non-Specific  -- Alkyl Mercury
    Compound)  Signs and  symptoms are due to the accumulation of mercury in
    the central nervous system and  appear with a latency period that may vary
    from one to several weeks  (Encyc Occupat Health and Safety 1983, p. 1337).
    The victim may complain of headache, prickling and abnormal sensations of
    the tongue, lips,  fingers  and toes, and other non-specific dysfunctions.
    More severe poisonings lead  to  symptoms including tremors of the hands,
    loss of side vision,  and slight loss of coordination (especially
    noticeable in speech,  writing and gait).   Irritability and bad temper are
    frequently present and may progress to mania.  Mental retardation is a
    symptom,  especially in children (Hayes 1982, p. 21).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First  Aid  Procedures:  This compound is an alkylmercury
    fungicide (Buchel  1983, p. 249).  Move victim to  fresh air; call emergency
    medical care.   If  not  breathing, give artificial  respiration.  If
    breathing is difficult, give oxygen.  In case of  contact with material,
    immediately flush  skin or  eyes  with running water for at least 15
    minutes.   Speed in removing  material from  skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes at site.  Keep victim
    quiet and maintain normal  body  temperature.  Effects may be delayed; keep
    victim under observation (DOT 1984, Guide  55).

-------
                                            CAS Registry Number:  2235-25-8
                                            Page 4 of 4
                     ETHYLMERCURIC PHOSPHATE
SECTION  VI  --  USE INFORMATION

    Used as  a fungicide for treating seeds (Hayes 1982,  p.  20);  product
    discontinued by manufacturer (Farm Chemicals Handbook 1984,  p.  C-97).  Not
    registered as a pesticide in the U.S. (USEPA/Pesticide  Index 1985).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be  Taken in Case Material is Released or Spilled)

    This compound is an alkylmercury fungicide (Buchel 1983,  p.  249).  Keep
    unnecessary  people away; isolate hazard area and deny entry.   Stay upwind;
    keep out  of  low areas.  Ventilate closed spaces before  entering them.
    Wear positive pressure breathing apparatus and special  protective
    clothing.  Remove and isolate contaminated clothing  at  the  site.  Do not
    touch spilled material; stop leak if you can do so without  risk.  Use
    water spray  to reduce vapors.  Small spills:  absorb with sand or other
    noncombustible absorbent material and place into containers  for later
    disposal.    Small dry spills:  with clean shovel place  material into
    clean, dry container and cover; move containers from spill  area.  Large
    spills:   dike far ahead of spill for later disposal  (DOT  1984,  Guide 55).

-------
                                     CAS Registry Number:  2238-07-^5
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31,  1985
                                                  Revision:
CHEMICAL IDENTITY --  DIGLYCIDYL ETHER

CAS Registry  Number:  2238-07-5

Synonyms:  bis(2,3-Epoxypropyl) Ether; DGE; Di(2,3-Epoxy)Propyl Ether;
Ether,  bis(2,3-Epoxypropyl); Glycidyl Ether; NSC 54739; Oxirane,
2,2'-(Oxybis(Methylene))bis-

Chemical Formula:   C,H,_00
                    o 1U J

Molecular  Weight:  130.16


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  0.5 ppm  (ceiling concentration) (*NIOSH/RTECS 1985)

    ACGIH TLV:  0.1 ppm, 0.5 mg/m3 (ACGIH 1983,  p.  18)

    IDLH:  85 ppm (NIOSH/OSHA 1978, p.  86)

    Other Limits Recommended:  Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   500°F, 260°C (*Patty 1963)

    Specific Gravity (H20=l):   1.262 at  25°C/4°C (*Patty 1963)

    Vapor Pressure (mmHg):  0.09 at 25°C  (*Patty  1963)

    Melting Point:   Not Found

    Vapor Density (AIR=1):  3.78 at 25°C  (*Patty  1963) (SUSPECT)

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility  in Water:   Not Found

    Appearance and Odor:  Colorless liquid with  a pronounced irritant odor
    (*Patty  1963).

-------
                                      CAS Registry Number:  2238-07-5
                                      Page 2 of 3
                           DIGLYCIDYL ETHER
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  147.2°F, 64.0°C (Encyc Occupat Health and
    Safety 1983,  p.  787)
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:   (Non-Specific -- Poison,  Flammable  Liquid,
    n.o.s.)   Small  fires:   dry chemical, carbon dioxide,  water  spray, or
    foam.   Large  fires:  water spray, fog, or foam (DOT 1984, Guide  57).

    Special  Fire Fighting Procedures:   (Non-Specific -- Poison,  Flammable
    Liquid,  n.o.s.)  Move container from fire area if you can do so  without
    risk.   Cool containers  that are exposed to flames with water from the  side
    until  well  after fire is  out.  Fight fire from maximum distance.  Dike
    fire control  water for  later disposal; do not scatter the material.  Keep
    unnecessary people away;  isolate hazard area and deny entry.   Stay upwind;
    keep out of low  areas.  Ventilate closed spaces before entering  them.
    Wear positive pressure  breathing apparatus and special protective clothing
    (DOT 1984,  Guide 57).

    Unusual Fire and Explosion Hazards:   (Non-Specific  -- Poison, Flammable
    Liquid,  n.o.s.)  May be ignited by heat, sparks, or flames.   Container may
    explode  in  heat  of fire.  Vapor explosion and poison hazard  indoors,
    outdoors or in sewers (DOT 1984, Guide 57).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:   Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Strong oxidizers (NIOSH/OSHA
    1978,  p.  86).

    Hazardous  Decomposition  or Byproducts:  Not Found

    Hazardous  Polymerization: May Occur:   Not  Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  2238-07-5
                                      Page 3  of 3
                           DIGLYCIDYL ETHER
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (*Sax 1979)
                       Skin:   Yes  (*Sax  1979)
                       Ingestion:  Yes (-Sax 1979)

    Health Hazards  (Acute, Delayed,  and Chronic):   This  compound can cause
    death or permanent  injury  via oral and inhalation routes during exposure
    that comes from normal use.  It is incapacitating and poisonous and
    requires special handling.   It can cause considerable discomfort by the
    dermal route (-Sax  1979).

    Signs and Symptoms of Exposure:   Irritation  of the eyes and  respiratory
    tract, skin damage, and skin burns (ACGIH 1980, p.  143; *Patty  1963).

    Medical  Conditions  Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  (Non-Specific -- Poison, Flammable
    Liquid,  n.o.s.)   Move victim to fresh air; call emergency medical care.
    If not breathing, give artificial respiration.  If breathing is difficult,
    give oxygen.   In case of contact with material, immediately flush skin or
    eyes with running water for  at least 15 minutes.  Speed in removing
    material from skin  is of extreme importance.  Remove and isolate
    contaminated clothing and  shoes at the site.  Keep victim quiet and
    maintain normal  body temperature.  Effects may be delayed; keep victim
    under observation (DOT 1984, Guide 57).


SECTION  VI --  USE INFORMATION

    It is used as a reactive diluent for epoxy resins;  chemical intermediate;
    stabilizer of chlorinated  organic compounds; a textile-treating agent
    (*Patty 1963).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    (Non-Specific -- Poison, Flammable Liquid, n.o.s.)   Keep unnecessary
    people away;  isolate hazard  area and deny entry.  Stay upwind;  keep out  of
    low areas.   Ventilate closed spaces before entering them.  Wear positive
    pressure breathing  apparatus and special protective clothing.   Shut off
    ignition sources; no flares, smoking, or flames in hazard area.  Do not
    touch spilled material; stop leak if you can do so without risk.  Use
    water spray to reduce vapors.  Small spills:  absorb with sand  or other
    noncombustible absorbent material and place into containers for later
    disposal.   Large spills:   dike far ahead of spill for  later disposal (DOT
    1984,  Guide 57).

-------
                                     CAS Registry Number:  2244-16-8
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31, 1985
                                                  Revision:
CHEMICAL IDENTITY -- CARVONE

CAS Registry Number:  2244-16-8

Synonyms:  (NIOSH/RTECS 1983  Synonyms, Volume 2, p. 653)  p-Mentha-6,8-
dien-2-one°,  (S)-(+)-; Carvone,  (+)-; (+)-Carvone; d-Carvone; d(+)-Carvone;
(S)-Carvone;  (S)-(+)-Carvone; 2-Cyclohexen-l-one, 2-Methyl-5-(l-Methyl-
ethenyl)-,  (S)-; d-p-Mentha-6,8,(9)-dien-2-one;  d-l-Methyl-4-Isopropenyl-6-
Cyclohexen-2-one

Chemical Formula:   C^H-.O
                    10  14
Molecular Weight:  150.24


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD   oral  (rat)
    3.71 mg/kg (^NIOSH/RTECS 1985)  (SUSPECT)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   d-form:  446°F, 230°C  at 755 mmHg (Merck 1983, p. 262)

    Specific Gravity (H20=l):  d-form:   0.965  at 20°C/4°C (Merck  1983,
    p.  262)

    Vapor Pressure  (mmHg):   Not  Found

    Melting  Point:   Not  Found

    Vapor Density (AIR=1):   Not Found

    Evaporation Rate (Butyl acetate=l):   Not  Found

-------
                                     CAS Registry Number:  2244-16-8
                                     Page 2 of 3
                            CARVONE


SECTION II  --  PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility in Water:   Not Found

    Appearance and Odor:  d-form:  liquid (Merck 1983, p.  262)


SECTION III -- FIRE  AND  EXPLOSION HAZARD DATA

    Flash Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not  Found
        DEL:  Not  Found

    Extinguishing Methods:  Not Found

    Special Fire Fighting Procedures:  Not Found

    Unusual Fire and  Explosion Hazards:  When heated  to decomposition it
    emits acrid smoke  and fumes (Sax 1984, p.  1739).


SECTION IV -- REACTIVITY DATA

    Stability:   Unstable:   Not Found
                Stable:  Not Found

        Conditions to  Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not  Found

    Hazardous Decomposition or Byproducts:   When heated to decomposition it
    emits acrid smoke  and fumes (Sax 1984, p.  1739).

    Hazardous Polymerization:   May Occur:  Not Found
          ,                    May Not  Occur:  Not Found

        Conditions to  Avoid:  Not Found


SECTION V  --  HEALTH  HAZARD  DATA

    Routes  of Entry:  Inhalation:  Not Found
                     Skin:  Yes  (Sax 1984, p. 1739)
                      Ingestion:   Yes (Sax 1984, p. 1739)

-------
                                     CAS  Registry Number:  2244-16-8
                                     Page 3 of 3
                            CARVONE


SECTION V  -- HEALTH HAZARD  DATA (Continued)

    Health Hazards  (Acute, Delayed,  and Chronic):  This material is highly
    toxic by ingestion and through the skin.  It is a skin irritant  (Sax 1984,
    p.  1739).

    Signs and  Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated by  Exposure:   Not  Found

    Emergency and  First Aid Procedures:   Not Found


SECTION VI -- USE INFORMATION

    d-Carvone is found in  caraway seed and dill  seed oils  (Merck 1983, p. 262)


SECTION VII -- PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps  to be Taken in Case Material is Released  or Spilled)

    Avoid skin contact (see Section V above).


COMMENTS

    Sources  searched but no information found:
        Clayton and Clayton 1981-82
        Verschueren 1983
        Weast 1979
        NFPA 1984
        Weiss 1980
        Buchel 1983
        CHRIS 1978

-------
                                      CAS Registry Number:   2275-18-5
                                      Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31,  1985
                                                    Revision:
CHEMICAL IDENTITY  -- PROTHOATE

CAS Registry Number:  2275-18-5

Synonyms:  Phosphorodithioic Acid, 0,0-Diethyl Ester,  S-Ester with
N-Isopropyl-2-Mercaptoacetamide; Trimethoate;  AC  18682; Acetamide,
N-Isopropyl-2-Mercapto-, S-Ester with 0,0-Diethyl Phosphorodithioate; American
Cyanamid 18,682;  El  18682; ENT 24,652; FAC;  FAC 20; FAK-40; Fostion;  Isopropyl
Diethyldithiophosphorylacetamide; L 343;  N-Monoisopropylamide of
0,0-Diethyldithiophosphorylacetic Acid; 0,0-Diethyl Phosphorodithioate S-Ester
with N-Isopropyl-2-Mercaptoacetamide;  0,0-Diethyl S-(N-Isopropylcarbamoyl-
methyl) Dithiophosphate; 0,0-Diethyl S-(N-Isopropylcarbamoylmethyl)
Phosphorodithioate;  0,0-Diethyl S-Isopropylcarbamoylmethyl Phosphorodithioate;
0,0-Diethyldithiophosphorylacetic Acid, N-Monoisopropylamide; Oleofac;
Phosphorodithioic Acid, 0,0-Diethyl Ester,  S-Ester with N-Isopropyl-2-
Mercaptoacetamide; Phosphorodithioic Acid,  0,0-Diethyl S-(2-((l-Methylethyl)
Amino)-2-Oxoethyl) Ester; Prothoat; Telefos

Chemical Formula:  CgH2QN03PS2

Molecular Weight:  285.40
SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:  Not  Found

    IDLH:  Not  Found

                                                           inhalation
Other Limits  Recommended:  Toxicity information:

(rat) 0.165 rag/ liter/4 hours (*NIOSH/RTECS 1985)
                                                        _
SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity (H20=l):  1.151 at  32°C  (^Worthing 1979)

    Vapor Pressure (mmHg):  1 x 10"4 at 40°C (^Worthing  1979)

-------
                                            CAS Registry Number:   2275-18-5
                                            Page 2 of 4
                            PROTHOATE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Melting Point:  83.3°F, 28.5°C;  technical product solidifies at
    70-75°F, 21-24°C  (^Worthing 1979).

    Vapor  Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:  2.5 g/liter at 68°F,  20°C (^Worthing  1979)

    Appearance and Odor:  Colorless crystalline solid, camphor-like odor.
    Technical product is amber to yellow semi-solid (^Worthing 1979).


SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  (Non-Specific  -- Organophosphorus Pesticide,
    n.o.s.)  This material  may burn, but does  not ignite readily.  For small
    fires,  use dry  chemical, carbon dioxide, water spray, or foam.  For  large
    fires,  use water spray, fog, or foam (DOT  1984,  Guide 55).

    Special  Fire Fighting Procedures:  (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)   Stay upwind; keep out  of low areas.  Move  containers
    from fire area  if you  can do it without risk.   Fight fire  from maximum
    distance.   Dike  fire control water for later disposal; do  not  scatter the
    material.   Wear positive pressure breathing apparatus and  special
    protective clothing  (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific --  Organophosphorus
    Pesticide,  n.o.s.)   Container may explode  in heat of fire.  Fire and
    runoff from fire control water may produce irritating or poisonous gases
    (DOT 1984,  Guide 55).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (*Spencer 1982)

        Conditions  to Avoid:  Not Found

-------
                                            CAS Registry Number:  2275-18-5
                                            Page 3 of 4
                             PROTHOATE
SECTION  IV --  REACTIVITY DATA  (Continued)

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V --  HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes  (Non-Specific -- Organophosphorus
                                  Pesticide, n.o.s.) (DOT 1984,  Guide  55)
                      Skin:  Yes (-Sax 1979)
                      Ingestion:   Yes (-Sax 1979)

    Health Hazards  (Acute, Delayed,  and Chronic):  This  is a highly toxic
    material capable of  causing death or permanent injury due to  exposures
    during normal  use.   Small doses at frequent intervals are additive.
    Similar to parathion (-Sax  1979).

    Signs and Symptoms of Exposure:   Symptoms may  include nausea, vomiting,
    abdominal cramps, diarrhea, excessive salivation, headache, giddiness,
    dizziness, weakness, muscle twitching, difficult  breathing, blurring or
    dimness of vision, and  loss of muscle coordination.   Death may  occur from
    failure of the respiratory center, paralysis of the respiratory muscles,
    intense bronchoconstriction, or all three (*Gosselin 1976).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency  and  First Aid Procedures:   (Non-Specific --  Organophosphorus
    Pesticides,  n.o.s.)  Move victim to fresh air;  call emergency medical
    care.   If not  breathing, give artificial respiration.  If breathing is
    difficult, give oxygen.  In case of contact with material,  immediately
    flush skin or  eyes with running water for at least 15 minutes.   Speed in
    removing material from  skin is of extreme importance.   Remove  and  isolate
    contaminated clothing and shoes at the site.  Keep victim quiet and
    maintain normal body temperature.  Effects may be delayed; keep victim
    under observation (DOT  1984, Guide 55).   If material has  been ingested,
    induce vomiting with ipecac (*Morgan 1982).

-------
                                            CAS  Registry  Number:  2275-18-5
                                            Page 4 of 4
                            PROTHOATE
SECTION  VI  --  USE INFORMATION

    This  material is an insecticide (*SRI)  and  an  acaricide ("Worthing 1979).


SECTION  VII -- PRECAUTIONS FOR SAFE  HANDLING AND USE
(Steps to be  Taken in Case Material is  Released or Spilled)

    (Non-Specific -- Organophosphorus Pesticide, n.o.s.)  Stay upwind; keep
    out of low areas.  Ventilate closed spaces  before  entering them.   Wear
    positive  pressure breathing apparatus and special  protective clothing.  Do
    not touch spilled material; stop leak if you can do it without risk.   Use
    water spray  to reduce vapors.   Small spills:   take up with sand or other
    noncombustible absorbent material and place into containers for later
    disposal.  Small dry spills:  with  clean shovel place material into clean,
    dry container and cover; move  containers from  spill area.   Large spills:
    dike  far  ahead of spill for later disposal  (DOT 1984, Guide 55).

-------
                                          CAS Registry Number:  2497-07-6
                                          Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October 31,  1985
                                                  Revision:
CHEMICAL IDENTITY -- OXYDISULFOTON

CAS Registry Number:  2497-07-6

Synonyms:  (NIOSH/RTECS  1983 Synonyms, Volume 3, p. 141)
Phosphorodithioic Acidj 0,0-Diethyl S-((Ethylsulfinyl)Ethyl)Ester; 0,0-Diethyl
S-(2-Ethylsulfinyl)Ethyl Phosphorodithioate; Disyston S;  Oxydemeton-Ethyl;
Phosphorodithioic Acid, 0,0-Diethyl S-[2-(Ethylsulfinyl)  Ethyl) Ester; BAY
23323;  DEPD; Disyston Sulfoxide; Disyston Sulphoxide; Ethylthiometon Sulfoxide

Chemical Formula:  C.H .0,PS-

Molecular Weight:  274.29


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LDgQ oral (mouse)
    12  mg/kg (*NIOSH/RTECS 1985)


SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H.0=l):  Not  Found

    Vapor Pressure (mmHg):   Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate  (Butyl  acetate=l):  Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:   Not Found

-------
                                      CAS Registry Number:   2497-07-6
                                      Page 2 of 3
                          OXYDISULFOTON
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  (Non-Specific --  Organophosphorus Pesticide,
    n.o.s.)   Extinguish with dry chemical, carbon dioxide, water spray, fog,
    or foam  (DOT 1984, Guide 55).

    Special  Fire Fighting  Procedures:  (Non-Specific  --  Organophosphorus
    Pesticide,  n.o.s.)  Fight fire from maximum distance.  Dike fire control
    water  for later disposal; do not scatter the material.  Poisonous gases
    may be generated from the fire or runoff water (DOT  1984, Guide 55'.

    Unusual  Fire and Explosion Hazards:   (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)  Some materials may burn but none of them ignite
    easily.   Container may explode in the heat of fire  (DOT 1984, Guide 55).
    When heated to decomposition, it emits very toxic fumes of oxides of
    sulfur and  phosphorus  (Sax 1984, p. 2108).
SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:   When heated  to decomposition,
    it emits  very toxic fumes of oxides of sulfur and phosphorus  (Sax 1984, p.
    2108)

    Hazardous Polymerization:   May Occur:   Not  Found
                               May Not  Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Yes  (Sax 1984, p. 2108)
                      Ingestion:   Yes (Sax 1984, p.  2108)

-------
                                      CAS Registry Number:   2497-07-6
                                      Page 3 of 3
                          OXYDISULFOTON
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Health Hazards (Acute, Delayed,  and Chronic):  This material is highly
    toxic orally and  through the skin (Sax 1984,  p.  2108).  This material is
    an organophosphate pesticide (Buchel, 1983,  p.  178).

    Signs and Symptoms of Exposure:   (Non-Specific -- Organophosphorus
    Pesticide, n.o.s.)   Mild:  headache, loss of appetite, nausea, dizziness.
    Moderate:  abdominal cramps, diarrhea, salivation,  excessive tearing,
    muscular cramps.  Severe:  fever, blue lips,  lack of  sphincter control,
    coma,  heart  shock, difficult breathing (ITII  1976,  p. 205).

    Medical  Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency and First Aid  Procedures:  (Non-Specific  -- Organophosphorus
    Pesticide, n.o.s.)   Move victim to fresh  air; call  emergency medical care.
    If not breathing  give  artificial respiration.  If breathing is difficult
    give oxygen.   In  case  of contact with material,  immediately flush skin or
    eyes with running water for at least 15 minutes.  Speed in removing
    material from skin is  of extreme importance.   Remove  and  isolate
    contaminated clothing  and shoes at the site.   Keep  victim quiet and
    maintain normal body temperature.  Effects may be delayed; keep victim
    under observation (DOT 1984, Guide 55).
SECTION  VI  --  USE  INFORMATION

    Agricultural insec  Lcide (Buchel 1983, p.  178).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be  Taken in Case Material is Released or Spilled)

    (Non-Specific --  Organophosphorus Pesticide, n.o.s.)   Do not touch spilled
    material.  Small  spills:  take up with sand or other  noncombustible
    absorbent material  and place into containers for later disposal.  Small
    dry spills:   with clean shovel place material into clean,  dry container
    and cover; move containers from spill area.  Large spills:  dike  far ahead
    of spill  for later  disposal (DOT 984, Guide 55).

-------
                                      CAS  Registry  Number:  2524-03-0
                                      Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- DIMETHYL PHOSPHOROCHLORIDOTHIOATE

CAS Registry Number:   2524-03-0

Synonyms:  Chlorodimethoxyphosphine Sulfide; Dimethoxy Thiophosphonyl
Chloride;  Dimethyl Chlorothionophosphate;  Dimethyl Chlorothiophosphate;
Dimethyl Thionophosphorochloridate; Dimethyl  Thiophosphorochloridate;  Methyl
PCT; 0,0-Dimethyl Chlorothionophosphate;  0,0-Dimethyl Chlorothiophosphate;
0,0-Dimethyl  Phosphorochlorothioate; 0,0-Dimethyl Phosphorothionochloridate;
0,0-Dimethyl  Thionophosphorochloridate;  0,0-Dimethyl Thiophosphoric Acid
Chloride;  0,0-Dimethylphosphorochloridothioate; 0,0-Dimethylthionophosphoryl
Chloride;  Phosphonothioic Acid, Chloro-,  0,0-Dimethyl Ester;
Phosphorochloridothioic Acid, 0,0-Dimethyl Ester

Chemical Formula:   C«H,C100PS
                    n. b   2
Molecular  Weight:  160.56


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found
    Other Limits Recommended:   Toxicity  information:  LD    oral  (rat)

    1000 r

    1985)
1000 mg/kg; LC   inhalation (mouse)  0.32 mg/liter/2 hours (-NIOSH/RTECS
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   151-153°F, 66-67°C at 16 mmHg (-Hawley  1977)

    Specific Gravity (H20=l):   1.320 at 25°C (-Hawley 1977)

    Vapor Pressure  (mmHg):  Not Found

    Melting Point:   Not Found

-------
                                      CAS  Registry Number:  2524-03-0
                                      Page 2 of 4
                DIMETHYL PHOSPHOROCHLORIDOTHIOATE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Vapor Density (AIR=1):   Not  Found

    Evaporation  Rate (Butyl  acetate=l):  Not Found

    Solubility  in Water:  Insoluble (*Hawley  1977)

    Appearance  and  Odor:  Colorless to  light amber liquid (*Hawley 1977).


SECTION  III  --  FIRE AND EXPLOSION  HAZARD  DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:  Not Found

    Extinguishing  Methods:   May  react  violently with water.  Extinguish
    with dry chemical, carbon dioxide,  water spray,  fog,  or foam  (DOT 1984,
    Guide  59).

    Special Fire  Fighting  Procedures:   Wear positive pressure breathing
    apparatus  and special protective clothing.  Move container  from fire area
    if you can do so without  risk.  Cool  containers  that  are exposed to flames
    with water from the side  until well after fire is out (DOT  1984, Guide 59),

    Unusual Fire and Explosion Hazards:   This material may burn but does
    not ignite readily.  This material  may ignite combustibles  (wood, paper,
    oil, etc.) (DOT 1984, Guide 59).


SECTION  IV --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:   Not Found

        Conditions to Avoid:   Not Found

    Incompatibility (Materials to  Avoid):  Not Found

    Hazardous Decomposition  or Byproducts:  When heated it emits very toxic
    fumes  of chlorine containing  compounds, phosphorus oxides,  and sulfur
    oxides  (Sax  1984, p. 1193).

    Hazardous Polymerization:  May Occur:   Not  Found
                              May Not Occur:  Not Found

        Conditions to Avoid:   Not Found

-------
                                      CAS  Registry Number:  2524-03-0
                                      Page 3 of 4
                DIMETHYL PHOSPHOROCHLORIDOTHIOATE
SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Not Found
                      Skin:  Not Found
                      Ingestion:   Not Found

SECTION  V --  HEALTH HAZARD DATA (Continued)

    Health Hazards (Acute,  Delayed, and Chronic):  This material  is  a
    strong "irritant to the eyes, skin, and mucous membranes (*Hawley 1977).

    Signs and Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency  and First Aid  Procedures:   Wash contaminated skin with soap
    and water.   Irrigate exposed eyes  with tap  water  (*Rumack 1975 to
    Present).   Move victim to fresh air;  call emergency medical care.  Remove
    and isolate  contaminated clothing and shoes at  the site.  Keep victim
    quiet  and maintain normal body temperature.   Effects may be delayed; keep
    victim under observation (DOT 1984, Guide 59).


SECTION  VI  --  USE INFORMATION

    This material  is used as a chemical intermediate  for insecticides,
    pesticides,  and fungicides; oil and gasoline additives; plasticizers;
    corrosion inhibitors; flame retardants;  and flotation agents (*Hawley
    1977). Not  registered as a pesticide in the U.S.  (USEPA/Pesticide Index
    1985).


SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be  Taken in Case Material is Released or  Spilled)

    Avoid  inhalation.  Wear full protective clothing  and eye protection (see
    Section V above).  Apply powdered limestone,  slaked lime, soda ash, or
    sodium bicarbonate ("CHRIS 1978).   Do not touch spilled material; stop
    leak if you  can do so without risk.  Use water  spray to reduce vapors.
    Small  spills:  absorb with sand or other noncombustible absorbent material
    and place into containers for later disposal.   Large spills:  dike spill
    for later disposal (DOT 1984,  Guide 59).

-------
                                     CAS Registry Number:   2524-03-0
                                     Page 4 of 4
               DIMETHYL PHOSPHOROCHLORIDOTHIOATE
COMMENTS:

    Sources  searched but no information found:
        NIOSH/RTECS 1983
        ACGIH  1983
        NIOSH/OSHA 1978
        Weast  1979
        Merck  1983
        NFPA 1984
        Student 1981
        Weiss  1980
        Doull  1980
        Clayton and Clayton 1981-82
        Arena  1979
        Gosselin 1984
        Encyc  Occupat Health and  Safety 1983
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes  1982
        Physicians' Desk Reference 1985
        Gilman 1985

-------
                                            CAS  Registry Number:   2540-82-1
                                            Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date:  October 31, 1985
                                                    Revision:
CHEMICAL IDENTITY -- FORMOTHION

CAS Registry Number:   2540-82-1

Synonyms:  Aflix; Anthio;  Anthio  25; Antio; CP 53926; ENT 27,257;
Formithion;  J-38;  N-Formyl-N-Methylcarbamoylmethyl 0,0-Dimethyl Phosphorodi-
thioate;  0,0-Dimethyl Dithiophosphorylacetic Acid N-Methyl-N-Formylamide;
0,0-Dimethyl Phosphorodithioate N-Formyl-2-Mercapto-N-Methylacetamide S-Ester;
0,0-Dimethyl S-:(N-Formyl-N-Methylcarbamoylmethyl) Phosphorodithioate;
0,0-Dimethyl S-(N-Methyl-N-Formylcarbamoylmethyl) Phosphorodithioate; OMS-968;
P 1; Phosphorodithioic Acid, 0,0-Dimethyl Ester,  N-Formyl-2-Mercapto-N-Methyl-
acetamide S-Ester;  Phosphorodithioic Acid, 0,0-Dimethyl  Ester, S-Ester with
N-Formyl-2-Mercapto-N-Methylacetamide; Phosphorodithioic Acid,
S-(2-(Formylmethylamino)-2-Oxoethyl) 0,0-Dimethyl Ester; S  6900;
S-(2-(Formylmethylamino)-2-Oxoethyl) 0,0-Dimethyl Phosphorodithioate;
S-(N-Formyl-N-Methylcarbamoylmethyl) Dimethyl Phosphorothiolothionate;
S-(N-Formyl-N-Methylcarbamoylmethyl) 0,0-Dimethyl Phosphorodithioate;
SAN 244 I; SAN 6913 I; SAN  7107 I; Toprose; VEL 4284

Chemical Formula:  C H12N04PS2

Molecular Weight:   257.29


SECTION I  -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:  Not  Found

    IDLH:   Not  Found

    Other Limits Recommended:  Toxicity information:   LC   inhalation

    (mouse)  0.027  mg/liter  (*NIOSH/RTECS 1985)


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:  Not  Found

    Specific Gravity (H20=l):   1.361 at  20°C  (*Spencer 1973)

-------
                                      CAS Registry Number:  2540-82-1
                                      Page 2 of 4
                            FORMOTHION
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Vapor  Pressure (mmHg):   8.5 x  10"6 at 20°C (''-Spencer 1973)

    Melting Point:  77°F, 25°C (*Spencer 1973)

    Vapor  Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):   Not Found

    Solubility  in Water:   Practically insoluble (*Merck 1976)

    Appearance and Odor:  Viscous yellow oil or crystalline mass ("Spencer
    1983)


SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing  Methods:  This compound is  an organophosphorus
    insecticide (Buchel  1983, p. 71).  Small fires:   dry chemical, carbon
    dioxide, water  spray, or  foam.  Large fires:  water spray, fog, or foam.
    Move container  from  fire area if you can do so without risk.   Fight fire
    from maximum distance.  Dike fire control water for later disposal; do not
    scatter material  (DOT 1984, Guide 55).

    Special Fire Fighting Procedures:  This compound is an organophosphorus
    insecticide (Buchel  1983, p. 71).  Keep unnecessary people away;  isolate
    hazard area and deny  entry.  Stay upwind;  keep out of low areas.
    Ventilate  closed spaces before entering them.   Wear positive pressure
    breathing  apparatus  and special protective clothing.   Remove and isolate
    contaminated clothing at the site (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:  When heated to decomposition, it
    emits  very toxic fumes of nitrogen oxides,  phosphorus oxides and sulfur
    oxides  (Sax 1984, p.  1157).  This compound is an organophosphorus
    insecticide (Buchel  1983, p. 71).  Some of these materials may burn but
    none of them ignite  readily.  Container may explode in heat of fire.   Fire
    and runoff from fire  control water may produce irritating or poisonous
    gases  (DOT 1984, Guide 55).

-------
                                      CAS Registry Number:
                                      Page 3 of 4
                                        2540-82-1
                           FORMOTHION
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (*Martin 1974)

        Conditions  to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Alkaline pesticides; hydrolyzed
    by water especially under alkaline conditions (Farm Chemicals Handbook
    1984,°p. C106))

    Hazardous Decomposition or Byproducts:   Not Found

    Hazardous Polymerization:   May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA
    Routes of Entry:
Inhalation:  Not Found
Skin:  Yes (Sax 1984, p.  1157)
Ingestion:  Yes (-Rumack  1975 to Present)
    Health  Hazards (Acute, Delayed,  and Chronic):  Formothion is one of the
    least toxic systemic organophosphates (*Agrochem Dept.  of  Info.  Service
    1971).   Formothion  is  a compound of low to moderate toxicity  (Hayes  1982,
    p.  369).   It causes the depression of cholinesterase (Hayes  1982, p.  370)
    leading to accumulation of acetylcholine in the nervous system,  which is
    believed to be  responsible for the symptoms (Doull 1980, p.  367).

    Signs and  Symptoms of Exposure:   Early symptoms of poisoning include:
    headache,  dizziness, weakness, perspiring,  nausea, vomiting,  and sensation
    of  tightness in chest  (*Agrochem Dept. of Info. Service 1971).   Chronic
    low doses  may produce  symptoms similar to influenza.  Acute  exposure
    causes  psychotic behavior, uncoordination,  unconsciousness,  convulsions,
    abdominal  pain, diarrhea, labored breathing, blurred vision,  and profound
    weakness ("Rumack 1975 to Present).

    Medical Conditions Generally Aggravated by Exposure:   Not  Found

-------
                                      CAS Registry Number:  2540-82-1
                                      Page 4  of 4
                            FORMOTHION

SECTION  V -- HEALTH  HAZARD DATA  (Continued)

    Emergency and First Aid Procedures:  This compound is an
    organophosphorus  insecticide (Buchel 1983, p. 71).  Move victim to fresh
    air;  call emergency  medical  care.  If not breathing, give artificial
    respiration.   If  breathing is difficult, give oxygen.  In case of contact
    with  material,  immediately flush skin or eyes with running water for at
    least 15 minutes.  Speed in  removing material from skin is of extreme
    importance.   Remove  and  isolate contaminated clothing and shoes at the
    site.   Keep  victim quiet and maintain normal body temperature.  Effects
    may be delayed; keep victim  under observation (DOT 1984, Guide 55).


SECTION  VI --  USE  INFORMATION

    An insecticide  and acaricide on crops and ornamentals.   It is not
    presently produced commercially in the U.S. (*SRI).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING  AND  USE
(Steps to be Taken  in Case Material is Released or Spilled)

    This  compound is  an  organophosphorus insecticide (Buchel 1983, p. 71).
    Stay  upwind;  keep out of low areas.  Ventilate closed spaces before
    entering them.  Wear positive pressure breathing apparatus and special
    protective clothing.  Do not touch spilled material; stop leak if you can
    do so without risk.   Use water spray to reduce vapors.   Small spills:
    absorb with  sand  or  other noncombustible absorbent material and place into
    containers for  later disposal.  Small dry spills:  with clean shovel,
    place material  into  clean, dry containers and cover; move containers, from
    spill area.   Large spills:   dike far ahead of spill for later disposal
    (DOT  1984, Guide  55).

-------
                                          CAS Registry Number:  2570-26-5
                                          Page  1 of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31. 1985
                                                  Revision:
CHEMICAL  IDENTITY -  PENTADECYLAMINE

CAS Registry Number:  2570-26-5

Synonyms:   (NIOSH/RTECS  1983 Synonyms, Volume 3, p. 12)
1-Pentadecanamine; n-Pentadecylamine; 1-Pentadecylamine

Chemical Formula:  C1SH--N

Molecular Weight:  227.49


SECTION I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity  information:   LC    inhalation
    (mammal) 0.2 mg/liter (*NIOSH/RTECS 1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  585.7°F,  307.6°C  (Weast 1983,  p. C-414)

    Specific Gravity  (H20=l):  0.8104 at 20°C/4°C (Weast  1983, p. C-414)

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  99.1°F, 37.3°C  (Weast 1983, p. C-414)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:   Flakes (Weast  1983, p. C-414)

-------
                                      CAS Registry Number:  2570-26-5
                                      Page 2 of 4
                          PENTADECYLAMINE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:   (Non-Specific -- Alkylamine, n.o.s.)   Flammable/
    combustible material; may be  ignited by heat, sparks, or flames.   Small
    fires:   dry chemical, carbon  dioxide, water spray, or foam.  Large fires:
    water  spray, fog, or  foam (DOT  1984, Guide 29).

    Special  Fire Fighting Procedures:   (Non-Specific -- Alkylamine,
    n.o.s.)   Move container from  fire area if you can do it without risk.   Do
    not get  water inside  container.  Cool containers that are exposed to
    flames with water from  the side until well after fire is out.   Withdraw
    immediately in case of  rising sound from venting safety device or any
    discoloration of tank due to  fire.  Keep unnecessary people away; isolate
    hazard area and deny  entry.   Stay upwind; keep out of low areas.   Wear
    self-contained (positive pressure if available) breathing apparatus and
    full protective clothing.  Isolate  for 1/2 mile in all directions if tank
    car or truck is involved in fire (DOT 1984, Guide 29).

    Unusual Fire and Explosion Hazards:  When heated to decomposition, it
    emits  toxic fumes of  nitrogen oxides (Sax 1984, p. 2128).  (Non-Specific
    -- Alkylamine, n.o.s.)   Vapors may travel to a source of ignition and
    flash back.  Container  may explode  in heat of fire.   Vapor explosion
    hazard indoors, outdoors or in sewers.  Runoff to sewer may create fire or
    explosion  hazard  (DOT 1984, Guide 29).


SECTION IV -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid: Not Found

    Incompatibility (Materials to  Avoid):  Not Found

    Hazardous  Decomposition or Byproducts:  When heated to decomposition,
    it emits toxic fumes  of oxides of nitrogen (Sax 1984, p. 2128).

    Hazardous  Polymerization: May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions to Avoid: Not Found

-------
                                      CAS Registry Number:  2570-26-5
                                      Page 3 of 4
                          PENTADECYLAMINE
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Sax 1984, p.  2128)
                      Skin:   Not Found
                      Ingestion:   Yes (Sax 1984, p.  2128)

    Health Hazards  (Acute, Delayed,  and  Chronic):  This material is
    moderately toxic by  oral ingestion and highly toxic by  inhalation  (Sax
    1984,  p.  2128).

    Signs and  Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated  by  Exposure:   Not  Found

    Emergency and  First Aid Procedures:  (Non-Specific -- Alkylamine,
    n.o.s.)   Move victim to  fresh air; call emergency medical care.  If not
    breathing,  give  artificial respiration.  If breathing is difficult, give
    oxygen.   Remove  and  isolate contaminated clothing and shoes  at  the site.
    In case of contact with  material, immediately flush skin or  eyes with
    running water for at least 15 minutes.  Keep victim quiet and maintain
    normal body temperature  (DOT 1984, Guide 29).


SECTION  VI  -- USE INFORMATION

    Not Found
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    (Non-Specific --  Alkylamine, n.o.s.)  Keep unnecessary people away;
    isolate hazard area  and deny entry.  Stay upwind; keep out of low areas.
    Wear self-contained  (positive pressure if available) breathing apparatus
    and full protective  clothing.  Shut off ignition sources;  no flares,
    smoking or flames in hazard area.  Do not touch spilled material;  stop
    leak if you can do it without risk.  Use water spray to reduce vapors;  do
    not get water inside container.  Small spills:  take up with sand or  other
    noncombustible absorbent material and place into containers for later
    disposal.   Large  spills:  dike far ahead of spill for later disposal  (DOT
    1984,  Guide 29).

-------
                                      CAS Registry Number:  2570-26-5
                                      Page 4 of 4
                         PENTADECYLAMINE
COMMENTS:

    Sources  searched but no information found:
        ACGIH 1983
        NIOSH/OSHA  1978
        Hawley 1981
        Merck 1983
        NFPA 1984
        Student  1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton  and Clayton 1981-82
        Arena 1979
        Gosselin 1984
        Encyc Occupat Health and Safety 1983
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes 1982
        Physicians' Desk Reference 1985
        Oilman 1985

-------
                                            CAS Registry Number:  2631-37-0
                                            Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- PROMECARB

CAS Registry Number:   2631-37-0

Synonyms: 'Carbamic Acid, Methyl-, m-Cym-5-yl Ester;  3-Isopropyl-5-
Methylphenyl  Methylcarbamate; 3-Methyl-5-(l-Methylethyl)Phenyl Methylcarbamate;
3-Methyl-5-Isopropylphenyl-N-Methylcarbamate;  5-Isopropyl-m-Tolyl Methyl-
carbamate;  Carbamic  Acid, (3-Methyl-5-(l-Methylethyl)Phenyl)-, Methyl Ester;
Carbamic Acid,  N-Methyl-, 3-Methyl-5-Isopropylphenyl Ester; Carbamult;
Carbanilic Acid,  3-Isopropyl-5-Methyl-,  Methyl Ester; ENT 27300; ENT 27300-A;
EP 316;  m-Cym-5-yl Methylcarbamate; QMS  716;  Promecarbe;  SCH 34615; Schering
34615;  Phenol,  3-Methyl-5-(l-Methylethyl)-.Methylcarbamate

Chemical Formula:  C12H17N02

Molecular Weight:  207.28


SECTION I --HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits  Recommended:   Toxicity information:  LD..   oral (guinea

    pig) 25 mg/kg (*NIOSH/RTECS 1985)


SECTION II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  243°F,  117°C  at 0.01 mmHg  (''-Merck 1976)

    Specific Gravity (H 0=1): Not  Found

    Vapor  Pressure  (mmHg):  3 x 10~5 at 25°C (Worthing 1983)

    Melting Point:   189-190°F, 87-87.5°C (*Merck 1976)

    Vapor  Density (AIR=1):  Not Found

    Evaporation Rate (Butyl  acetate=l):  Not Found

-------
                                            CAS Registry Number:  2631-37-0
                                            Page 2 of 4
                             PROMECARB
SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility in  Water:   92  mg/liter at room temperature (*Martin and
    Worthing 1974)

    Appearance and Odor:   Almost odorless, colorless crystalline solid
    (*Martin and Worthing 1974).

SECTION III -- FIRE AND EXPLOSION HAZARD  DATA

    Flash Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:   (Non-Specific -- Carbamates)  Extinguish fire
    using agent suitable  for the surrounding fire, as the material itself
    burns with difficulty.   Use water in flooding quantities as a fog.  Use
    alcohol foam, carbon  dioxide, or dry chemical (Student 1981,  p.  104).

    (Non-Specific -- Carbamate Pesticide, Solid,  n.o.s.)  This material may
    burn, but  does not  ignite readily.  For small fires, use dry chemical,
    carbon dioxide, water spray, or foam.  For large fires, use water spray,
    fog,  or foam (DOT  1984,  Guide 55).

    Special  Fire Fighting Procedures:  (Non-Specific -- Carbamate
    Pesticide,  Solid, n.o.s.)  Stay upwind; keep out of low areas.   Move
    container  from fire area if you can do it without risk.  Fight fire from
    maximum distance.  Dike  fire control water for later disposal;  do not
    scatter the material.  Wear positive pressure breathing apparatus and
    special protective clothing (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific  -- Carbamate
    Pesticide,  Solid, n.o.s.)  Container may explode in heat of fire.  Fire
    and runoff from fire  control water may produce irritating or poisonous
    gases (DOT 1984, Guide 55).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes, no changes observed on storage  for  140 hours
    at 50°C (122°F)  (*Martin  and Worthing 1974).

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Hydrolyzed by alkalis  (*Merck
    1976).

-------
                                            CAS Registry Number:  2631-37-0
                                            Page 3 of 4
                            PROMECARB
SECTION  IV --  REACTIVITY DATA (Continued)

    Hazardous Decomposition or Byproducts:   Not Found

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V --  HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:   Yes (Doull  i960,  p. 375)
                      Skin:  Yes (Doull 1980, p. 375)
                      Ingestion:   Yes (Doull  1980,  p. 375)

    Health Hazards (Acute, Delayed, and Chronic):   Promecarb is highly
    toxic  by ingestion and is absorbed through the intact  skin.  It is a
    reversible cholinesterase inhibitor and its effects are related to action
    on the nervous sysem  (Gosselin 1984, p. 11-308;  *Rumack 1975 to Present).

    Signs  and Symptoms of Exposure:  Diarrhea, nausea,  vomiting,  excessive
    salivation,  headache, pinpoint pupils and  uncoordinated muscle movements
    are all common symptoms of exposure to carbamate insecticides (*Rumack
    1975 to Present).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency  and First Aid  Procedures:  Move the  victim to fresh air and
    monitor for  respiratory distress.   If a cough or difficulty in breathing
    develops, be sure airways are clear and be prepared to provide oxygen.
    Decontaminate the patient if there is any  possibility  of exposure to the
    skin.    Wash the skin and hair with soap and water at  least twice.  Remove
    all contaminated clothing (*Rumack 1975 to Present; DOT 1984, Guide 55).


SECTION  VI --  USE INFORMATION

    Non-systemic contact  insecticide (*Martin  and Worthing 1974).  Not for
    sale or use  in the USA (*SRI).

-------
                                            CAS Registry Number:  2631-37-0
                                            Page 4 of 4
                            PROMECARB
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING  AND USE
(Steps to  be Taken  in  Case Material is Released or Spilled)

    (Non-Specific -- Carbamate Pesticide, Solid, n.o.s.)  Keep unnecessary
    people away;  isolate hazard areas and deny entry.  Stay upwind and keep
    out of low areas.  Wear positive presure breathing apparatus and special
    protective clothing, including boots, gloves and goggles.  Do not touch
    spilled material or breathe the dusts, vapors, or fumes from burning
    materials.  Use water spray to reduce vapors.  Do. hot handle broken
    packages without protective equipment.  Wash away any material that may
    have contacted  the body with soap and water.  Take ,up small spills with
    sand or other noncombustible absorbent material and place in containers
    for later disposal.  Small dry spills; with clean shovel place material
    into clean, dry container and cover; move containers from spill area.
    Dike far ahead  of  large spills for later disposal (Student 1981, p. 104;
    DOT 1984,  Guide 55).

-------
                                           CAS Registry Number:   2636-26-2
                                           Page  1 of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY - CYANOPHOS

CAS Registry Number:   2636-26-2

Synonyms:  (NIOSH/RTECS Synonyms, Volume 3, p. 154)  Phosphorothioic
Acid, 0,0-Dimethyl Ester, 0-Ester with p-Hydroxybenzonitrile;  BAY 34727; Bayer
34727; Ciafos; 0-p-Cyanophenyl 0,0-Dimethyl Phosphorothioate;  Cyanox; Cyap;
0,0-Dimethyl-O-p-Cyanophenyl Phosphorothioate; 0,0-Dimethyl  0-4-Cyanophenyl
Phosphorothioate; 0,0-Dimethyl 0-4-Cyanophenyl Thiophosphate;  ENT 25,675;
Phosphorothioic Acid 0-(4-Cyanophenyl) 0,0-Dimethyl Ester; S 4084; Sumitomo S
4084; Sunitomo S 4084

Chemical Formula:   C.H..NO-PS

Molecular Weight:  243.23


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended: Toxicity information:   LD    oral (rat) 18
    mg/kg  (*NIOSH/RTECS 1985)


SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   246-248°F, 119-120°C  at 0.09 mmHg (Decomposes)  (Merck
    1983,  p.  322)

    Specific Gravity 01.0=1):  1.255-1.265 at 25°C/4°C  (Worthing 1983,
                                   V ^  _ j_ O S\ O f
p. 142)

Vapor Pressure  (mmHg):  8.0 x 10"" at  20°C  (Worthing 1983,  p.  142)

Melting  Point:  57-59°F,  14-15°C  (Merck 1983, p.  322)

Vapor Density (AIR=1):  Not Found

Evaporation Rate (Butyl  acetate=l):  Not Found

-------
                                            CAS  Registry  Number:  2636-26-2
                                            Page 2 of 4
                            CYANOPHOS
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility  in Water:  Slightly soluble (Merck  1983, p. 322)

    Appearance and Odor:  Yellow to reddish-yellow transparent liquid
    (Merck 1983, p.  322).


SECTION  III  --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:  Not Found

    Extinguishing  Methods:  (Non-Specific  -- Organophosphorus Pesticide,
    Liquid, n.o.s.)  This material may burn,  but  does not ignite readily.   For
    small  fires, use dry chemical, carbon dioxide, water spray, or foam.   For
    large  fires, use water spray, fog,  or foam  (DOT 1984, Guide 55).

    Special Fire Fighting Procedures:   (Non-Specific -- Organophosphorus
    Pesticide, Liquid, n.o.s.)  Stay upwind;  keep out of low areas.  Move
    container  from fire area if you can do it without risk.  Fight fire from
    maximum distance.  Dike fire control water  for later disposal; do not
    scatter the material.  Wear positive pressure breathing apparatus and
    special protective clothing (DOT 1984,  Guide  55).

    Unusual Fire and Explosion Hazards:   (Non-Specific  --  Organophosphorus
    Pesticide, Liquid, n.o.s.)  Container may explode in heat of fire.  Fire
    and runoff from  fire control water may produce irritating or poisonous
    gases  (DOT 1984, Guide 55).


SECTION  IV -- REACTIVITY  DATA

    Stability:  Unstable:  Yes  (Merck 1983, p. 322)
                Stable:

        Conditions to Avoid:   Rapidly decomposes  under alkaline conditions
        and upon exposure to light (Merck 1983, p. 322).

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:   Not Found

-------
                                            CAS Registry Number:  2636-26-2
                                            Page 3 of 4
                            CYANOPHOS
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Hayes, 1982, p.  301)
                      Skin:   Yes  (Hayes, 1981, p. 301)
                      Ingestion:  Yes (Hayes, 1982,  p.  301)

    Health Hazards  (Acute, Delayed,  and  Chronic):   Cyanophos  is an
    organophosphorus insecticide  (Buchel 1983, p.  80).   It is  a cholinesterase
    inhibitor (Merck 1983, p.  322).  Death may occur after a massive oral
    dose;  with smaller accidental doses,  onset of illness may be delayed
    (Hayes 1982,  p.  302).

    Signs and Symptoms of Exposure:  Symptoms of organophosphorus pesticide
    poisoning include:   headache, giddiness, nervousness, blurred vision,
    weakness, nausea, cramps,  diarrhea, and discomfort in the chest.  Signs
    include:   sweating,  pinpoint pupils,  tearing,  salivation and other
    excessive respiratory  tract  secretion, vomiting, cyanosis, papilledema,
    uncontrollable muscle  twitches followed by muscular weakness,  convulsions,
    coma,  loss of reflexes, and  loss of sphincter control (Hayes 1982, p.  301),

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  (Non-Specific -- Organophosphorus
    Pesticide, Liquid, n.o.s.)   Move victim to fresh air; call emergency
    medical care.  If not  breathing, give artificial respiration.   If
    breathing is  difficult, give oxygen.   In case of contact with material,
    immediately flush skin or  eyes with running water for at least 15
    minutes.   Speed  in removing  material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes at the site.   Keep
    victim quiet  and maintain  normal body temperature.   Effects may be
    delayed;  keep victim under observation (DOT 1984, Guide 55).


SECTION  VI  --  USE INFORMATION

    This material is an  insecticide (Merck 1983, p. 322) used against rice
    stem borers  and  house  flies  (Buchel 1983, p. 80).  Not registered as a
    pesticide in  the U.S.  (USEPA/Pesticide Index 1985).

-------
                                            CAS Registry Number:  2636-26-2
                                            Page 4 of 4
                            CYANOPHOS
SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken  in Case Material is Released or  Spilled)

    (Non-Specific -- Organophosphorus Pesticide,  Liquid, n.o.s.)  Stay upwind;
    keep out of  low areas.  Ventilate closed spaces  before entering them.
    Wear positive pressure breathing apparatus  and  special protective
    clothing.  Remove and isolate contaminated  clothing at the site.  Do not
    touch spilled material.  Use water spray to reduce vapors.  Take up small
    spills with  sand or other noncombustible absorbent material and place in
    containers for  later disposal.  Dike far ahead  of large spills for later
    disposal (DOT 1984, Guide 55).
COMMENTS

    Sources  searched but no information found:
        Farm Chemicals Handbook 1984
        Sax  1984
        Weast 1979
        Hawley 1981
        Gosselin  1984

-------
                                      CAS Registry Number:   2642-71-9
                                      Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31, 1985
                                                    Revision:
CHEMICAL IDENTITY  -- AZINPHOS-ETHYL

CAS Registry Number:  2642-71-9

Synonyms:  Phosphorodithioic  Acid, 0,0-Diethyl Ester, S-Ester with
3-(Mercaptomethyl)-l,2,3-Benzotriazin-4(3H)-one;  Ethyl Guthion;
3,4-Dihydro-4-oxo-3-Benzotriazinylmethyl 0,0-Diethyl  Phosphorodithioate;
Athyl-Gusathion;  BAY 16259; Bayer 16259; Cotnion-Ethyl; Crysthion; ENT 22,014;
Ethyl Azinphos; Ethyl  Gusathion; Ethyl Homolog of Guthion; Gusathion A;
Gusathion H and K;  Gusation A; Guthion (Ethyl);  0,0-Diethyl
S-(4-Oxobenzyltriazine-3-Methyl) Dithiophosphate;  0,0-Diethyl
S-(4-Oxobenzotriazino-3-Methyl) Phosphorodithioate; Phosphorodithioic Acid,
0,0-Diethyl Ester,  S-Ester With 3-(Mercaptomethyl)-l,2,3-Benzotriazin-
4(3H)-one; Phosphorodithioic Acid, 0,0-Diethyl S-((4-oxo-l,2,3-Benzotriazin-
3(4H)-yl)Methyl)  Ester; R 1513; S-(3,4-Dihydro-4-oxo-l,2,3-Benzotriazin-3-yl
Methyl) 0,0-Diethyl Phosphorodithioate; Azinphos  Ethyl Dithiophosphate

Chemical Formula:  C, 0H, ,N000PS.
                    12 ID j ->   2.

Molecular Weight:   345.38
SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:  Not  Found

    IDLH:  Not  Found

    Other Limits Recommended:  Toxicity information:  LD   oral (rat) 7

    mg/kg (*NIOSH/RTECS  1985)
SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  232°F,  111°C  at  0.001 mmHg (-Worthing 1979)

    Specific Gravity (H20=l):   1.284 at  20°C/4°C  (^Worthing 1979)

    Vapor Pressure  (mmHg):  2.2 x 10"7 at 20°C  (^Worthing  1979)

-------
                                      CAS Registry Number:   2642-71-9
                                      Page 2 of 4
                          AZINPHOS-ETHYL


SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS  (Continued)

    Melting  Point:  127°F, 53°C (*Farm Chemicals Handbook  1981)

    Vapor Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl  acetate=l):  Not Found

    Solubility  in Water:   Insoluble (*Farm Chemicals  Handbook  1981)

    Appearance and Odor:  Colorless crystals  (*Farm  Chemicals Handbook 1981)


SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  (Non-Specific  -- Organophosphorus Pesticide,
    n.o.s.)  This material may burn, but does not  ignite readily.  For small
    fires,  use dry  chemical, carbon dioxide, water spray,  or  foam.  For large
    fires,  use water spray, fog, or foam (DOT  1984,  Guide  55).

    Special  Fire Fighting  Procedures:   (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)  Stay upwind; keep out of  low areas.   Move containers
    from fire  area  if you can do so without risk.  Fight fire from maximum
    distance.   Dike  fire  control water for  later disposal; do not scatter the
    material.   Wear positive pressure breathing apparatus  and special
    protective clothing (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)  When heated to decomposition,  it emits very toxic
    fumes  of sulfur, phosphorus and nitrogen oxides  (Sax 1984, p. 1355).
    Container  may explode in heat of fire (DOT  1984, Guide 55).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                Stable:  Yes (*Worthing 1979)

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

-------
                                      CAS Registry Number:  2642-71-9
                                      Page 3 of 4
                          AZINPHOS-ETHYL
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Decomposition or  Byproducts:  When heated to decomposition,
    it emits highly toxic  fumes  of nitrogen, phosphorous and sulfur oxides
    (Sax 1984, p.  1355).

    Hazardous Polymerization:   May Occur:   Not Found
                                May Not Occur:  Not Found

        Conditions to Avoid:   Not Found
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (-Sax 1975)
                       Skin:   Yes  (''-Sax  1975)
                       Ingestion:  Yes (*Sax 1975)

    Health Hazards  (Acute, Delayed,  and  Chronic):   The  systemic effects of
    this compound are similar  to parathion.  It is an extremely potent
    systemic toxicant via ingestion,  inhalation and skin contact.   It may
    cause death or permanent injury after very short exposure to small
    quantities (*Sax 1975).

    Signs and  Symptoms  of Exposure: The symptoms  are similar to
    parathion.   Nausea is often  the first symptom followed by vomiting,
    abdominal cramps, diarrhea and excessive salivation.  Also common in
    inhalation exposure are headache, giddiness, vertigo and weakness, nasal
    discharge and a sensation  of tightness  in the chest.  Other symptoms
    include blurring or dimness  of vision;  tearing; eye muscle spasm and pain;
    pinpoint pupils; loss of muscle coordination; slurring of speech; muscle
    twitching (especially tongue and  eyelids); difficulty in breathing;
    excessive secretions  of mucous in mouth, nose, and respiratory tract;
    convulsions and coma (*Gosselin 1976).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:   (Non-Specific -- Organophosphorus
    Pesticides, n.o.s.)  Move  victim  to  fresh air; call emergency medical
    care.   If not breathing, give artificial respiration.   If breathing  is
    difficult, give oxygen.  In  case  of  contact with material, immediately
    flush skin or eyes with running water  for at least 15 minutes.  Speed  in
    removing material from skin  is of extreme importance.   Remove and isolate
    contaminated clothing and  shoes at the  site.  Keep victim quiet and
    maintain normal body temperature.  Effects may be delayed; keep victim
    under observation (DOT 1984, Guide 55).

-------
                                      CAS Registry Number:  2642-71-9
                                      Page 4  of 4
                          AZINPHOS-ETHYL
SECTION  VI  --  USE  INFORMATION

    It is  a non-systemic  insecticide with good ovicidal properties and long
    persistence.   It  is not  registered for use in the U.S.  (*SRI).  Among
    other  crops,  it is used  on cotton, citrus, vegetables,  potatoes,  tobacco,
    rice,  and cereals  ("Worthing 1979) to control caterpillars,  beetles,
    aphids, spiders and many other insects ("Farm Chemicals Handbook 1981).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to  be  Taken in Case Material is Released or Spilled)

    (Non-Specific -- Organophosphorus Pesticide, n.o.s.)  Stay upwind;  keep
    out of low areas.  Ventilate closed spaces before entering them.   Wear
    positive  pressure breathing apparatus and special protective clothing.  Do
    not touch spilled material; stop leak if you can do so  without risk.  Use
    water  spray  to reduce vapors.  Small spills:  absorb with sand or other
    noncombustible absorbent material and place into containers  for later
    disposal.  Small dry  spills:  with clean shovel place material into clean
    dry containers and cover; move containers from spill area.   Large spills:
    dike far  ahead of spill  for later disposal (DOT 1984, Guide  55).

-------
                                          CAS Registry Number:   2665-30-7
                                          Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31. 1985
                                                  Revision:
CHEMICAL  IDENTITY --  PHOSPHONOTHIOIC ACID,  METHYL-,
0-(4-NITROPHENYL) O-PHENYL ESTER

CAS Registry Number:  2665-30-7

Synonyms:   (NIOSH/RTECS 1983 Synonyms,  Volume  3, p.  124)  CP 40294; ENT
25,787;  Monsanto CP-40294; Phosphonothioic Acid,  Methyl-, 0-(p-Nitrophenyl)
0-Phenyl Ester

Chemical Formula:  C,,H10NO.PS
                    13 12  4
Molecular Weight:  309.29


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA  PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  LD   oral  (rat) 8
    mg/kg (*NIOSH/RTECS  1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H.0=l):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):   Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:  Not Found

-------
                                      CAS  Registry Number:  2665-30-7
                                      Page 2 of 4
                  PHOSPHONOTHIOIC ACID,  METHYL-,
                 O-(4-NITROPHENYL) O-PHENYL ESTER
SECTION  III --  FIRE AND EXPLOSION HAZARD  DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing Methods:   (Non-Specific -- Organophosphorus  Pesticide)
    This material  may burn,  but does  not  ignite readily.  For small  fires, use
    dry chemical,  carbon dioxide,  water spray, or foam.  For large  fires, use
    water  spray,  fog, or foam (DOT 1984,  Guide 55).

    Special  Fire  Fighting  Procedures:   (Non-Specific -- Organophosphorus
    Pesticide)   Stay upwind; keep  out of  low areas.  Move containers  from fire
    area if you  can do so without  risk.   Fight fire from maximum distance.
    Dike fire control water for later disposal; do not scatter the material
    (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific  -- Organophosphorus
    Pesticide)   Container may explode in  heat of fire  (DOT 1984, Guide 55).


SECTION  IV --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not  Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:  May Occur:   Not  Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not  Found
SECTION V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes  (Non-Specific -- Organic Phosphorus
                                  Pesticide)  (Hayes 1982, p.  301)
                      Skin:  Yes (Non-Specific  -- Organic Phosphorus
                             Pesticide)  (Hayes  1982, p. 301)
                      Ingestion:   Yes (Non-Specific -- Organic Phosphorus
                                  Pesticide)  (Hayes 1982, p.  301)

-------
                                      CAS Registry Number:   2665-30-7
                                      Page 3 of 4
                   PHOSPHONOTHIOIC ACID, METHYL-,
                  0-(4-NITROPHENYL) O-PHENYL  ESTER
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Health Hazards (Acute, Delayed,  and Chronic):  (Non-Specific -- Organic
    Phosphorus Insecticides)  Organic phosphorus insecticides  are absorbed by
    the skin,  as  well  as by the respiratory and gastrointestinal tracts.  It
    is a cholinesterase  inhibitor (Hayes 1982,  p.  301).

    Signs and Symptoms of Exposure:   (Non-Specific -- Organic Phosphorus
    Insecticides)  Symptoms are headache, giddiness,  blurred vision,
    nervousness,  weakness, nausea, cramps, diarrhea,  and discomfort in the
    chest.  Signs include  sweating, tearing, salivation,  vomiting, bluing of
    the skin,  convulsions, coma,  loss of reflexes  and loss  of  sphincter
    control (Hayes 1982, p. 302).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:  (Non-Specific -- Organophosphorus
    Pesticide) Move victim to fresh air; call  emergency medical care.  If not
    breathing, give artificial respiration.  If breathing is difficult, give
    oxygen.  In case of  contact with material,  immediately  flush skin or eyes
    with running  water for at least 15 minutes.  Speed in removing material
    from skin is  of extreme importance.  Remove and isolate contaminated
    clothing and  shoes at  the site.  Keep victim quiet and  maintain normal
    body temperature<  Effects may be delayed;  keep victim  under observation
    (DOT 1984, Guide 55).
SECTION  VI --  USE  INFORMATION

    Not Found


SECTION  VII .--  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    (Non-Specific —  Organic  Phosphorus Insecticides)  Do not touch  spilled
    material; stop leak if possible.  Use water spray to reduce vapors.
    Absorb spills with noncombustible absorbent material.  For large spills
    dike far ahead for later  disposal.  When handling the material wear
    positive pressure breathing apparatus and special protective clothing  (DOT
    1984,  Guide  55).

-------
                                    CAS Registry Number:  2665-30-7
                                    Page 4 of 4
                  PHOSPHONOTHIOIC ACID, METHYL-,
                 O-(4-NITROPHENYL)  O-PHENYL ESTER
COMMENTS
    Sources searched, no information found:
       Sax 1984
       Merck 1983
       Farm Chemicals Handbook 1984
       Buchel 1983
       Verschueren  1983
       Weast 1979
       Hawley 1981

    Chemical structure indicates  that this is  an organic phosphorus pesticide.

-------
                                     CAS Registry Number:  2703-13-1
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
 CHEMICAL IDENTITY -- PHOSPHONOTHIOIC ACID, METHYL-, O-ETHYL
 O-(4-(METHYLTHIO)PHENYL) ESTER

 CAS Registry Number:   2703-13-1

 Synonyms:   (SANSS 1983 Synonyms)   Bayer 29952; BAY 29952; ENT 25,612;
 0-Ethyl 0-[4-(Methylthio)Phenyl]  Methylphosphonothioate; Phenol,
 p-(Methylthio)-0-Ester with 0-Ethyl Methylphosphonothioate; Phosphonothioic
-Acid, Methyl-,  0-Ethyl 0-(p-(Methylthio)Phenyl) Ester

 Chemical Formula:  C  H  0 PS

 Molecular Weight:   262
 SECTION I  -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH  TLV:  Not  Found

    IDLH:   Not  Found

    Other Limits Recommended:   Toxicity information:  LD,   oral (rat) 1

    mg/kg (*NIOSH/RTECS 1985)


 SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:  Not Found

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure  (mmHg):  Not Found

    Melting  Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl  acetate=l):   Not Found

-------
                                    CAS Registry Number:   2703-13-1
                                    Page 2 of 3
              PHOSPHONOTHIOIC  ACID, METHYL-, O-ETHYL
                  0-(4-(METHYLTHIO)PHENYL)  ESTER
SECTION II  -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Solubility in  Water:  Not Found

    Appearance and Odor:  Not  Found


SECTION III -- FIRE AND EXPLOSION HAZARD DATA

    Flash Point (Method Used):   Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Not Found

    Special  Fire Fighting  Procedures:  Not Found

    Unusual  Fire and Explosion  Hazards:  Not Found


SECTION IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials  to Avoid):   Not Found

    Hazardous  Decomposition or  Byproducts:  Not Found

    Hazardous  Polymerization:  May Occur:  Not Found
                              May Not  Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION V --  HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:  Not Found
                     Skin:  Not Found
                     Ingestion:  Not Found

-------
                                     CAS Registry Number:  2703-13-1
                                     Page 3 of 3
              PHOSPHONOTHIOIC ACID, METHYL-, 0-ETHYL
                  0-(4-(METHYLTHIO)PHENYL)  ESTER
    Health Hazards  (Acute, Delayed,  and Chronic):  Not  Found

    Signs and Symptoms of Exposure:  Not Found

    Medical Conditions  Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid Procedures:   Not  Found


SECTION VI  -- USE INFORMATION

    Not  Found
SECTION VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps  to be Taken in Case Material is Released or Spilled)

    Not Found
COMMENTS

    Sources searched but  no  information found:
       RTECS 1983
       ACGIH 1983
       NIOSH/OSHA 1978
       Hawley 1981
       Weast 1979
       Merck 1983
       Sax 1984
       NFPA 1984
       Student 1981
       Weiss 1980
       CHRIS 1978
       Doull 1980
       Clayton and Clayton  1981-82
       Arena 1979
       Gosselin 1984
       Encyc Occupat Health and Safety 1983
       Buchel 1983
       Farm Chemicals Handbook 1984
       Physicians' Desk  Reference 1985
       Gilman 1985
       DOT 1984
       Hayes 1982

-------
                                     CAS Registry Number:   2757-18-8
                                     Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  THALLOUS MALONATE

CAS Registry Number:  2757-18-8

Synonyms:  (NIOSH/RTECS  1983 Synonyms, Volume 2, p.637)  Malonic Acid,
Thallium  Salt (1:2);  Formomalenic Thallium; Propanedioic Acid, Dithallium
Salt;  Thallium Malonate

Chemical  Formula:  C3H204«2T1

Molecular  Weight:  510.79


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  (Soluble Thallium Compounds)  0.1 mg (Tl)/m3  (OSHA 1984,
    p. 663)

    ACGIH TLV:   (Soluble Thallium Compounds)   0.1 mg  (Tl)/m3 (skin)
    (ACGIH 1985, p. 31)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity  information:   LD5Q oral (rat)

    18.8  mg/kg (*NIOSH/RTECS 1985)


SECTION  II --  PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H 0=1):  Not  Found

    Vapor Pressure (mmHg):   Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:  Not Found

-------
                                      CAS Registry Number:   2757-18-8
                                      Page 2 of 4
                        THALLOUS  MALONATE
SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing Methods:  (Non-specific  -- Thallium Salts, n.o.s.)  For
    small  fires  use dry chemical, carbon dioxide, water spray, or foam.  For
    large  fires  use water spray, fog, or foam.   Move  container from fire area
    if you can do so without risk (DOT 1984,  Guide  53).  . .

    Special  Fire Fighting  Procedures:  (Non-Specific  -- Thallium Salts,
    n.o.s.)   Keep unnecessary people away;  isolate  hazard area and deny
    entry.   Stay upwind; keep out of low areas.  Wear self-contained (positive
    pressure if  available) breathing apparatus  and  full protective clothing
    (DOT 1984, Guide 53).

    Unusual  Fire and Explosion Hazards:   (Non-Specific  --  Thallium  Salts,
    n.o.s.)   Fire may produce irritating or poisonous gases.  Runoff from fire
    control  or dilution water may cause pollution  (DOT 1984, Guide 53).


SECTION  IV --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V --  HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:   Yes (Non-Specific  -- Thallium Salts,
                                  n.o.s.)  (DOT 1984, Guide 53)
                      Skin:  Not Found
                      Ingestion:   Yes (Non-Specific  -- Thallium Salts,
                                  n.o.s.)  (Gosselin  1984, p. III-379)

-------
                                      CAS  Registry Number:  2757-18-8
                                      Page 3 of 4
                        THALLOUS MALONATE


SECTION  V --  HEALTH HAZARD DATA (Continued)

    Health Hazards (Acute,  Delayed, and Chronic):  (Non-Specific  --
    Thallium Salts, n.o.s.)  Poisonous if  swallowed.  Inhalation of dust
    causes poisoning  (DOT 1984, Guide  53).

    Signs and Symptoms of Exposure:   Not Found

    Medical  Conditions Generally Aggravated by Exposure:  Not Found

    Emergency  and First Aid  Procedures:   (Non-Specific -- Thallium Salts,
    n.o.s.)   Move  victim to fresh air; call  emergency medical care.  Remove
    and isolate  contaminated clothing  and  shoes at  the site.  In case of
    contact with material, immediately flush skin or eyes with running water
   . for at least 15 minutes (DOT 1984, Guide 53).


SECTION  VI --  USE  INFORMATION

    Not Found
SECTION  VII  -- PRECAUTIONS FOR SAFE  HANDLING AND USE
(Steps to be Taken  in Case Material is Released  or Spilled)

    Avoid inhalation; wear proper respiratory protection  (see Section V
    above).   (Non-Specific -- Thallium Salts,  n.o.s.)  Do not touch spilled
    material;  stop  leak if you can do so without risk.  Small spills:  absorb
    with sand or other noncombustible absorbent  material  and place into
    containers for  later disposal.  Small dry spills:  with clean shovel place
    material into clean, dry container and  cover; move containers from spill
    area.   Large spills:  dike far ahead of spill for  later disposal (DOT
    1984,  Guide 53).

-------
                                      CAS  Registry Number:  2757-18-8
                                      Page 4 of 4
                        THALLOUS MALONATE
COMMENTS
    Sources  searched but no information found:
        ACGIH  1983
        Hawley 1981
        Weast  1979
        Merck  1983
        Sax  1984
        NFPA 1984
        Student 1981
        Weiss  1980
        CHRIS  1978
        Doull  1980
        Clayton and Clayton 1981-82
        Arena  1979
        Encyc  Occupat Health and Safety 1983
        Buchel  1983
        Farm Chemicals Handbook 1984
        Hayes  1982
        Physicians' Desk Reference 1985
        Oilman  1985

-------
                                           CAS Registry Number:  2763-96-4
                                           Page 1 of 3
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- MUSCIMOL

CAS Registry Number:  2763-96-4

Synonyms:  3-Isoxazolol, S-(Aminomethyl)-;  3(2H)-Isoxazolone,
5-(Aminomethyl)-; 3-Hydroxy-5-Aminomethylisoxazole; 3-Hydroxy-5-
Aminomethylisoxazole-Agarin;  5-(Aminomethyl)-3-Isoxazolol;  5-Aminomethyl-3-
Hydroxyisoxazole; 5-Aminomethyl-3-Isoxyzole; Agarin; Agarine; Pantherine

Chemical Formula:   C4H  N  0

Molecular  Weight:   114.12


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LDcn oral (mouse)
    17 mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not  Found

    Specific Gravity (H  0=1):  Not Found

    Vapor Pressure (mmHg):   Not Found

    Melting Point:   347°F, 175°C (decomposes) (Merck 1983, p. 903)

    Vapor Density  (AIR=1):   Not Found

    Evaporation Rate  (Butyl acetate=l):   Not Found

    Solubility in Water:   Soluble  (Gosselin 1984, p. 11-247)

    Appearance and Odor:  Crystals  (*Merck  1976)

-------
                                            CAS  Registry Number:  2763-96-4
                                            Page 2 of 3
                            MUSCIMOL
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  Not Found

    Special  Fire Fighting  Procedures:   Not  Found

    Unusual Fire and Explosion Hazards:  When heated to  decomposition, it
    emits  toxic fumes of nitrogen oxides (Sax  1984, p. 227).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:   Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid): Not  Found

    Hazardous  Decomposition or Byproducts:   When heated to decomposition it
    emits  toxic fumes of nitrogen oxides (Sax  1984, p. 227).

    Hazardous  Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found


SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Yes (Sax 1984, p. 227)

    Health Hazards (Acute, Delayed, and Chronic):  This  compound  is a
    natural constituent of amanita mushrooms and  is extremely toxic.   It  is a
    potent central nervous system depressant,  and is believed to be
    responsible for most of the nervous system effects that result from eating
    this mushroom (-Grant  1974; *Gilman 1980).  The lowest toxic dose  in
    humans has  been reported at 109 pg/kg (*NIOSH/RTECS 1985).

-------
                                            CAS  Registry Number:  2763-96-4
                                            Page 3 of 3
                            MUSCIMOL
SECTION V --  HEALTH HAZARD DATA  (Continued)

    Signs and Symptoms of Exposure:  Muscimol is  a potent central nervous
    system  depressant (*Merck 1976).   Initially, drowsiness, stupor,  or sleep
    followed by mild nausea and vomiting,  muscle spasms in extremities,
    various emotional changes and distorted perceptions of space and  time,  but
    only rarely hallucinations (Gosselin 1984,  p. 11-247).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency  and First Aid  Procedures:  Treat as  for general poisoning
    (•cRumack 1975  to Present).  Move  victim to  fresh air; call emergency
    medical care.  In case of contact with material, immediately flush skin or
    eyes with running water for at least 15 minutes.  Speed in removing
    material from  skin is of extreme  importance.  Remove and isolate
    contaminated clothing and shoes at the site (DOT 1984, Guide 53).


SECTION VI -- USE INFORMATION

    Formerly used  as a sedative and an antiemetic (*Merck 1976) and for
    experimental laboratory purposes  (*Peer Review Committee).


SECTION VII -- PRECAUTIONS FOR  SAFE HANDLING AND  USE
(Steps  to be Taken in Case Material is Released or Spilled)

    Not Found

-------
                                            CAS  Registry Number:  2778-04-3
                                            Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31. 1985
                                                    Revision:
CHEMICAL IDENTITY -- ENDOTHION

CAS Registry Number:   2778-04-3

Synonyms :=  Phosphorothioic  Acid, 0,0-Dimethyl Ester,  S-Ester with
2-(Mercaptomethyl)-5-Methoxy-4H-Pyran-4-one;  2-(S-Dimethylphosphorothio-
methyl)-5-Methoxy-4-Pyrone; 5-Methoxy-2-(Dimethoxyphosphinylthiomethyl)
Pyrone-4;  AC-18737; Endocid; Endocide; ENT 24653;  Exothion; FMC 5767; NIA
5767; Niagara 5767; 0,0-Dimethyl Phosphorothioate,  S-Ester with
2-(Mercaptomethyl)-5-Methoxy-4H-Pyran-4-one;  0,0-Dimethyl S-(5-Methoxy-
4-oxo-4H-Pyran-2-yl) Phosphorothioate; 0,0-Dimethyl S-(5-Methoxypyronyl-
2-Methyl)  Thiophosphate; Phosphate 100; Phosphopyron;  Phosphopyrone;
Phosphorothioic  Acid, S-((5-Methoxy-4-oxo-4H-Pyran-2-yl)Methyl) 0,0-Dimethyl
Ester; S-(5-Methoxy-4-Pyron-2-ylmethyl) Dimethyl Phosphorothioate;
S-5-Methoxy-4-Oxopyran-2-ylmethyl Dimethyl Phosphorothioate;
S-5-Methoxy-4-Pyron-2-ylmethyl 0,0-Dimethyl Phosphorothioate;
S-[(5-Methoxy-4-Oxo-4H-Pyran-2-yl)Methyl]  0,0-Dimethyl Phosphorothioate

Chemical Formula:  C H^O-PS

Molecular  Weight:   280.24


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not  Found

    Other Limits Recommended:  Toxicity  information:  LD   oral (mouse)

    17 mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity (H_0=l):  Not Found

    Vapor Pressure (mmHg):  Not Found

-------
                                            CAS Registry Number:   2778-04-3
                                            Page 2 of 4
                            ENDOTHION
SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS (Continued)
    Melting  Point:  205°F, 96°C (*Martin  and Worthing 1974); 194-196°F,
    90-91°C  (Hawley  1981, p. 410)

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:   150 g/100 ml at  68°F,  20°C (*Martin and Worthing
    1974)

    Appearance and  Odor:  White crystals,  slight  odor  (*Martin and Worthing
    1974).


SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  (Non-Specific  -- Organophosphorus Pesticide,
    n.o.s.)   This  material  may burn, but  does not  ignite  readily.  For small
    fires, use dry chemical, carbon dioxide, water  spray, or foam.  For large
    fires, use water spray, fog, or foam  (DOT  1984, Guide 55).

    Special  Fire Fighting Procedures:  (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)   Stay upwind; keep out of low areas.  Move containers
    from fire area if you can do it without risk.   Fight  fire from maximum
    distance.   Dike  fire control water for  later disposal;  do not scatter the
    material.   Wear positive pressure breathing apparatus and special
    protective clothing  (DOT 1984, Guide  55).

    Unusual  Fire and Explosion Hazards:   (Non-Specific --  Organophosphorus
    Pesticide,  n.o.s.)   Cylinder may explode in heat or  fire.  Fire and runoff
    from fire control water may produce irritating  or poisonous gases (DOT
    1984,  Guide 55).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:   2778-04-3
                                            Page 3 of 4
                            ENDOTHION
SECTION  IV --  REACTIVITY DATA  (Continued)

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it emits very toxic  fumes of phosphorous oxides and sulfur  oxides  (Sax
    1984,  p. 1276).

    Hazardous Polymerization:   May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V --  HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Yes (Sax  1984, p.  1276)
                      Ingestion:   Yes (Sax 1984, p.  1276)

    Health Hazards  (Acute, Delayed,  and Chronic):  This material is
    poisonous to humans  (Hayes  1982, p. 365).  Its toxic effects  are most
    likely related to action on the nervous system (Clayton and Clayton  1982,
    p. 11-291).   '

    Signs and Symptoms of Exposure:   Symptoms  include headache, dizziness,
    nausea, salivation,  vomiting, abdominal pain, diarrhea, chest pain,
    blurred vision,  muscle twitching, and weakness.  Exposure may cause
    psychotic behavior,  loss of coordination, unconsciousness,  and  rarely,
    convulsions  (*Rumack 1975 to Present).

    Medical Conditions Generally Aggravated by  Exposure:   Not Found

    Emergency and  First Aid Procedures:   (Non-Specific -- Organophosphorus
    Pesticide, n.o.s.)   Move victim to fresh air; call emergency  medical
    care.   If not breathing, give artificial respiration.   If breathing  is
    difficult, give oxygen.  In case of contact with material,  immediately
    flush skin or eyes with  running water for at least 15 minutes.  Speed in
    removing material from skin is of extreme importance.   Remove and  isolate
    contaminated clothing and shoes at the  site.   Keep victim quiet and
    maintain normal body temperature.  Effects may be delayed;  keep victim
    under observation (DOT 1984, Guide 55).

-------
                                            CAS Registry Number:   2778-04-3
                                            Page 4 of 4
                            ENDOTHION
SECTION  VI  --  USE INFORMATION

    This material  is a systemic insecticide (^Martin and Worthing  1974).  It
    is not sold  in the USA or Canada (Hayes 1982,  p.  365).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be  Taken in Case Material is Released or Spilled)
                           ..•       .*.,.!»•   "
    (Non-Specific  -- Organophosphorus Pesticide,  n.o.s.)  Stay  upwind; keep
    out of low areas.  Ventilate closed spaces before entering.them.  Wear
    positive  pressure breathing apparatus and special protective clothing.  Do
    not touch spilled material; stop leak if  you can do. so without risk.  Use
    water spray  to reduce vapors.  Small spills:   absorb with sand or other
    noncombustible absorbent material and place into containers for later
    disposal.  Small dry spills:  with clean  shovel place material into clean,
    dry containers and cover; move containers from spill  area.  Large spills:
    dike far  ahead ;of spill-for later disposal .(DOT 1984, Guide 55).

-------
                                    CAS Registry Number:  3037-72-7
                                    Page 1 of 3
                       EPA CHEMICAL  PROFILE
                                                  INTERIM
                                                  Date: October 31.  1985
                                                  Revision:
CHEMICAL  IDENTITY -- SILANE, (4-AMINOBUTYL)DIETHOXYMETHYL-

CAS Registry Number:  3037-72-7

Synonyms (NIOSH/RTECS  1983 Synonyms, Volume 1, p.  775):  Butylamine,
4-(Diethoxymethylsilyl)-;  (4-Aminobutyl)diethoxymethylsilane;
delta-Aminobutylmethyldiethoxysilane

Chemical  Formula:  C H  NO Si

Molecular Weight:  205.42


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  ID   oral  (rat)

    6500  mg/kg; LD5Q  dermal (rat, mouse,  rabbit) 45 mg/kg  (*NIOSH/RTECS  1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl acetate=l):  Not  Found

    Solubility in Water:  Not Found

    Appearance and Odor:  Not Found

-------
                                     CAS Registry Number:   3037-72-7
                                     Page 2 of 3
              SILANE, (4-AMINOBUTYDDIETHOXYMETHYL-


SECTION  III  --  FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing  Methods:   Not Found                             ,

    Special Fire  Fighting  Procedures:   Not Found

    Unusual Fire and Explosion Hazards:   When heated to decomposition, it
    emits  toxic  fumes of nitrogen  oxides (Sax 1984, p.  204).


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:   Not Found

        Conditions to Avoid:  Not  Found

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it emits  toxic fumes of nitrogen oxides (Sax 1984,  p.  204).

    Hazardous Polymerization:  May Occur:  Not Found
                              May Not Occur:  Not Found

        Conditions to Avoid:  Not  Found


SECTION  V -- HEALTH HAZARD  DATA

    Routes of Entry:   Inhalation:  Not  Found
                      Skin:  Yes  (Sax  1984, p. 204)
                      Ingestion:  Yes  (Sax 1984,  p.  204)

    Health Hazards (Acute,  Delayed,  and Chronic):  This material is highly
    toxic  to  skin, moderately toxic by  ingestion and is a mild skin irritant
    (Sax 1984, p. 204).

-------
                                     CAS Registry Number:  3037-72-7
                                     Page 3 of 3
             SILANE, (4-AMINOBUTYDDIETHOXYMETHYL-


SECTION V  -- HEALTH HAZARD DATA  (Continued)

    Signs and Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:  Not Found


SECTION VI -- USE  INFORMATION

    Not Found
SECTION VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps  to be Taken in Case Material is Released or Spilled)

    Avoid contact with skin (see Section V above).
COMMENTS:

    Sources searched but no information found:
       Arena 1978
       Doull 1980
       Encyc Occupat Health and Safety 1983
       NFPA 1984
       Oilman 1985
       Gosselin 1983
       Hawley 1981
       Hayes 1982
       Merck 1983
       Weiss 1980
       Farm Chemicals Handbook 1984
       NIOSH/OSHA 1978
       ACGIH 1983
       Weast 1979
       Verschueren 1983

-------
                                     CAS Registry Number:  3048-64-4
                                     Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October 31.  1985
                                                  Revision:
CHEMICAL  IDENTITY --  VINYLNORBORNENE

CAS Registry Number:  3048-64-4

Synonyms:   (NIOSH/OSHA  1983 Synonyms,  Volume 2,  p.  867)  2-Norbornene,
5-Vinyl-; Bicyclo [2.2.l]Hept-2-ene,  5-Ethenyl-; 2-Vinylnorbornene;
5-Vinylnorbornene; 5-Vinyl-2-Norbornene

Chemical Formula:  CgH12

Molecular Weight:  120.21


SECTION I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found
    Other Limits Recommended:  Toxicity  information:   LC.   inhalation

    (rat)  19.6 rag/liter/

    (*NIOSH/RTECS 1985)
(rat)  19.6 mg/liter/4 hours; LC   inhalation (mouse)  0.018 yg/L
SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Not Found

    Appearance  and Odor:   Not Found

-------
                                     CAS Registry Number:  3048-64-4
                                     Page 2 of 3
                         VINYLNORBORNENE


SECTION  III  --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:   Not Found                                -

    Extinguishing Methods:  Not Found

    Special Fire  Fighting Procedures:  Not Found

    Unusual Fire and Explosion Hazards:  When heated to decomposition, it
    emits  acrid  smoke and fumes  (Sax 1984, p.  2731).


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not  Found
                Stable:  Not Found

        Conditions to Avoid:   Not  Found

    Incompatibility (Materials  to Avoid):   Not  Found

    Hazardous Decomposition or  Byproducts:  When heated to decomposition,
    it  emits  acrid smoke and fumes (Sax 1984,  p.  2731).

    Hazardous Polymerization:   May Occur:  Not Found
                              May Not  Occur:  Not Found

        Conditions to Avoid:   Not  Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (Sax 1984,  p.  2731)
                      Skin:   Yes  (Sax 1984, p. 2731)
                      Ingestion:  Yes (Sax 1984,  p.  2731)

    Health  Hazards  (Acute, Delayed,  and  Chronic):  Not Found

    Signs  and Symptoms of Exposure:  Not  Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Not Found

-------
                                     CAS Registry Number:  3048-64-4
                                     Page 3 of 3
                         VINYLNORBORNENE
SECTION VI  -- USE INFORMATION

    Not Found
SECTION VII -- PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to be Taken in Case Material is Released or  Spilled)

    Avoid inhalation and skin  contact (see Section  V  above).
COMMENTS

    Sources searched but no information found:
        ACGIH 1983
        NIOSH/OSHA 1978
        Hawley 1981
        Weast 1979
        Merck 1983
        DOT 1984
        NFPA 1984
        Student 1981
        Weiss i960
        CHRIS 1978
        Doull 1980
        Clayton and Clayton 1981-82
        Arena 1979
        Gosselin 1984
        Encyc Occupat Health and Safety 1983
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes 1982
        Physicians' Desk Reference 1985
        Oilman .1985

-------
                                           CAS Registry Number:  3254-63-5
                                           Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31.  1985
                                                   Revision:
CHEMICAL IDENTITY -- PHOSPHORIC ACID,  DIMETHYL 4-(METHYLTHIO)
PHENYL  ESTER

CAS Registry Number:  3254-63-5

Synonyms:  Dimethyl p-(Methylthio)Phenyl Phosphate; 4-Methylthiophenyl
Dimethyl  Phosphate; Allied GC  6506; ENT 25734; GC  6506; HA-1200; 0,0-Dimethyl
0-(4-Methylmercaptophenyl) Phosphate; Phenol,  p-(Methylthio)-, Dimethyl
Phosphate;  Phosphoric Acid, Dimethyl p-(Methylthio)Phenyl Ester

Chemical  Formula:   C9H1304PS

Molecular Weight:  248.25


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD   oral (rat) 7
    mg/kg (*NIOSH/RTECS)


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not  Found

    Specific Gravity (H  0=1):  1.273 at 21.4°C (^Worthing 1979)

    Vapor Pressure (mmHg): Not  Found

    Melting Point:   Not  Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not  Found

    Solubility in Water:   9.8 mg/100 ml at room temperature  (*Worthing 1979)

    Appearance and Odor:  Colorless  liquid  (-Worthing  1979)

-------
                                            CAS Registry Number:  3254-63-5
                                            Page 2 of 4
              PHOSPHORIC ACID, DIMETHYL 4-(METHYLTHIO)
                           PHENYL ESTER
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:   (Non-Specific -- Organophosphorus Pesticide,  Liquid,
    n.o.s.)   May burn but does not ignite readily (DOT 1984,  Guide 55)
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:   (Non-Specific -- Organophosphorus Pesticide,
    Liquid,  n.o.s.)  Small fires:  dry chemical,  carbon dioxide, water spray,
    or foam.   Large  fires:  water spray, fog, or foam.  Move  container from
    fire area if you can do it without risk.  Fight fire from maximum distance
    (DOT 1984 Guide  55).

    Special Fire Fighting Procedures:  (Non-Specific -- Organophosphorus
    Pesticide,  Liquid, n.o.s.)  Wear positive pressure breathing apparatus and
    special  protective clothing.  Dike fire control water for later  disposal;
    do not scatter the material (DOT 1984, Guide 55).

    Unusual  Fire and Explosion Hazards:  When heated to decomposition,  it
    emits  very toxic fumes of sulfur oxides and phosphorus  oxides  (Sax 1984,
    p. 2214).  (Non-Specific  -- Organophosphorus Pesticide, Liquid,  n.o.s.)
    Fire and runoff  from fire control water may produce irritating or
    poisonous gases  (DOT 1984, Guide 55).


SECTION  IV  --  REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):  Hydrolyzed by alkalies at  37.5°C
    ('-Worthing 1979).

    Hazardous  Decomposition  or Byproducts:  When heated to  decomposition,
    it emits  very toxic fumes of sulfur oxides and phosphorus oxides (Sax
    1984,  p.  2214).

    Hazardous  Polymerization:  May Occur:   Not Found
                               May  Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:   3254-63-5
                                            Page 3 of 4
              PHOSPHORIC ACID, DIMETHYL 4-(METHYLTHIO)
                           PHENYL ESTER
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Sax 1984,  p.  2214)
                      Skin:  Yes  (Sax 1984, p. 2214)
                      Ingestion:   Yes (Sax 1984,  p.  2214)

    Health Hazards  (Acute, Delayed,  and  Chronic):  Highly toxic by oral or
    skin exposure  (Sax 1984, p. 2214).  Its effects are probably due to action
    on ths, nervous  system  (Doull 1980, p. 371).  This compound may cause death
    through respiratory  arrest (*Gosselin 1976).

    Signs and Symptoms of Exposure:  Symptoms are similar to those of
    parathion.   Common symptoms upon inhalation include:  nausea, vomiting,
    abdominal cramps, diarrhea, excessive salivation, headaches, dizziness,
    weakness,  runny nose,  and sensation of tightness  in chest.  Other symptoms
    include:   loss  of muscle coordination, slurring of speech, mental
    confusion,  and  disorientation.  Further exposure  symptoms  include
    convulsions, loss of bladder control, random jerky movements, and coma
    (*Gosselin 1976).

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  (Non-Specific --  Organophosphorus
    Pesticide,  Liquid, n.o.s.)  Move victim to fresh  air; call emergency
    medical care.   If not  breathing, give artificial  respiration.  If
    breathing is difficult, give oxygen.   Remove and  isolate contaminated
    clothing  and shoes at  the site.  In case of contact with material,
    immediately flush skin or eyes with running water for at least 15
    minutes.   Speed in removing material from skin is of extreme importance.
    Keep victim quiet and  maintain normal body temperature.  Effects may be
    delayed;  keep victim under observation (DOT 1984, Guide  55).


SECTION  VI  --  USE INFORMATION

    A contact and systemic insecticide and acaricide  ("Worthing 1979).

-------
                                            CAS Registry Number:   3254-63-5
                                            Page 4 of 4
              PHOSPHORIC ACID, DIMETHYL 4-(METHYLTHIO)
                           PHENYL ESTER
SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be  Taken  in Case Material is Released or Spilled)

    (Non-Specific -- Organophosphorus Pesticides)  Keep material  out of water
    courses  and  sewer.  Build dikes to contain flow as  necessary.  Use water
    spray  to  knock  down vapor.  Do not touch spilled material.  Wear
    self-contained  breathing apparatus and protective clothing  (Student 1981,
    p. 384).

    (Non-Specific -- Organophosphorus Pesticide,  Liquid,  n.o.s.)  Keep
    unnecessary  people away; isolate hazard area and deny entry.  Stay upwind;
    keep out  of  low areas.  Ventilate closed spaces before entering them.
    Wear positive pressure breathing apparatus and special protective
    clothing.  Remove and isolate contaminated clothing at the  site.  Do not
    touch  spilled material; stop leak if you can do so  without  risk.  Use
    water  spray  to  reduce vapors.  Small spills:   absorb with sand or other
    noncombustible  absorbent material and place into containers for later
    disposal.  Large spills:  dike far ahead of spill for later disposal (DOT
    1984,  Guide  55).

-------
                                          CAS Registry Number:   3569-57-1
                                          Page 1 of 3
                      EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October 31, 1985
                                                  Revision:
CHEMICAL  IDENTITY -- SULFOXIDE,  3-CHLOROPROPYL OCTYL

CAS Registry Number:  3569-57-1

Synonyms:   (NIOSH/RTECS 1983 Synonyms,  Volume 3, p. 672)  Sulfoxide,
3-Chloropropyl-n-Octyl-; 3-Chloropropyl-n-Octylsulfoxide, MGK Repellent 1,207

Chemical  Formula:  C  H  C10S

Molecular Weight:  238.85


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  LD5   oral (rat)

    5660  mg/kg; LD5Q  dermal (rabbit) 8 mg/kg (^NIOSH/RTECS 1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:  Not Found

    Specific Gravity  (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):   Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:  Not Found

-------
                                     CAS Registry Number:   3569-57-1
                                     Page 2 of 3
                 SULFOXIDE, 3-CHLOROPROPYL OCTYL


SECTION III  -- FIRE AND EXPLOSION HAZARD DATA

    Flash Point (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Not Found

    Special  Fire Fighting Procedures:   Not Found

    Unusual Fire and Explosion Hazards:  Not  Found


SECTION IV  -- REACTIVITY DATA

    Stability:  Unstable:   Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:  May Occur:   Not Found
                              May Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION V -- HEALTH  HAZARD DATA

    Routes  of Entry:  Inhalation:  Not Found
                     Skin:  Not Found
                     Ingestion:   Not Found

    Health Hazards  (Acute, Delayed, and Chronic):  Not Found

    Signs and Symptoms of Exposure:   Not  Found

    Medical  Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Not Found

-------
                                    CAS  Registry Number:  3569-57-1
                                    Page 3 of 3
                 SULFOXIDE,  3-CHLOROPROPYL OCTYL
SECTION VI -- USE INFORMATION

    Not Found
SECTION VII --  PRECAUTIONS  FOR SAFE HANDLING AND USE
(Steps  to be Taken in Case Material is Released or Spilled)

    Not Found
COMMENT

    The  following sources were  searched but no information was found:
        Clayton and Clayton 1981-82
        Merck 1983
        Sax 1984
        Verschueren 1983
        Weast 1979
        Hayes 1981
        Buchel 1983
        Farm Chemicals Handbook 1984
        DOT 1984

-------
                                            CAS Registry Number:   3689-24-5
                                            Page 1 of 3
                        EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date:  October 31. 1985
                                                    Revision:
CHEMICAL IDENTITY  --  SULFOTEP

CAS Registry Number:  3689-24-5

Synonyms:  Thiopyrophosphoric Acid, Tetraethyl Ester; Dithion;
Di(thiophosphoric)Acid, Tetraethyl Ester; Dithio;  Dithiodiphosphoric Acid,
Tetraethyl Ester;  Dithiofos; Dithione; Dithiophos; ASP 47;  Bay-E-393;
Bis-0,0-Diethylphosphorothionic Anhydride; Bladafum;  Pirofos; Plant Dithio
Aerosol;  Plantfume 103 Smoke Generator; Pyrophosphoric Acid, Dithiono-,
Tetraethyl Ester;  Pyrophosphorodithioic Acid, 0,0,0,0-Tetraethyl Ester;
Pyrophosphorodithioic  Acid, Tetraethyl Ester; Sulfatep;  Sulfotepp; Sulphatep;
TEDP; TEDTP;  Tetraethyl Dithio Pyrophosphate, Liquid  (DOT); Tetraethyl
Dithionopyrophosphate; Tetraethyl Dithiopyrophosphate; Tetraethyl
Thiodiphosphate; Tetraethyl Thiopyrophosphate; Thiodiphosphoric Acid
[((HO)2P(S))20], Tetraethyl Ester; Thiopyrophosphoric Acid  [((HO)2PS)20],
Tetraethyl Ester;  Thiopyrophosphoric Acid, Tetraethyl Ester; Thiotep; Thiotepp

Chemical Formula:   CDHoriOcP0S0
                    o 2.0 j Z 2.

Molecular Weight:   322.32


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Air:  TWA 0.2 mg/m3 (skin) (-NIOSH/OSHA 1978)

    ACGIH TLV:   TWA 0.2 mg/m3;  STEL  0.6  mg/m3 (skin)  (--ACGIH 1980)

    IDLH:  35 mg/m3 (*NIOSH/OSHA 1978)

    Other Limits Recommended:  Toxicity information:   LC   inhalation

    (rat) 0.038 mg/liter/4 hours (--NIOSH/RTECS 1985)


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   277-282°F,  136-139°C  at 2  mmHg  (*Weast 1979)

    Specific Gravity (H 0=1):   1.196 at 25°C  (*Weast  1974)

    Vapor  Pressure (mmHg):  1.7 x 10"4 at 20°C (^Worthing  1979)

    Melting Point:   Not Found

-------
                                            CAS Registry Number:  3689-24-5
                                            Page 2 of 3
                             SULFOTEP
SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Vapor  Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility  in Water:  25 mg/liter at room temperature  (Worthing 1983)

    Appearance and Odor:  Colorless oil (*Weast  1979); pale yellow mobile
    liquid (^Worthing  1979); garlic odor (*ACGIH 1980)


SECTION III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash Point (Method Used):   Not combustible  (NIOSH/OSHA 1978, p.  172)
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing  Methods:  (Non-Specific  -- Organophosphorus Pesticide,
    n.o.s.) For small  fires, use dry chemical,  carbon  dioxide, water spray,
    or foam.   For  large fires, use water spray,  fog,  or foam.  Fight fire from
    maximum distance (DOT 1984, Guide 55).

    Special Fire Fighting  Procedures:  (Non-Specific  -- Organophosphorus
    Pesticide,  n.o.s.)  Wear positive pressure breathing apparatus and special
    protective clothing (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:  When heated to  decomposition,
    emits highly toxic  fumes of phosphorus  oxides  and sulfur oxides (*Sax
    1979).


SECTION IV --  REACTIVITY DATA

    Stability:   Unstable:
                Stable:  Yes (''-Spencer 1973)

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):   Strong oxidizers  (NIOSH/OSHA
    1978, p. 172).  Technical products corrosive to iron  (-Worthing 1979).

    Hazardous  Decomposition or Byproducts:  Not  Found

    Hazardous  Polymerization:  May Occur:  Not Found
                               May Not  Occur:   Not  Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  3689-24-5
                                            Page 3 of 3
                              SULFOTEP
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (Hawley 1981, p. 981)
                       Skin:   Yes  (Sax  1984, p.  1395)
                       Ingestion:  Yes  (Sax 1984, p. 1395)

    Health Hazards  (Acute, Delayed,  and Chronic):   Super toxic; probable
    oral lethal dose in humans  is  less  than 5 mg/kg, or a taste (less than 7
    drops) for a 70  kg (150  Ib.) person  (*Gosselin  1976).   It is a
    cholinesterase inhibitor  (*Sax 1979).

    Signs and  Symptoms of Exposure:   Material  is  similar  to parathion in
    symptomatology,  including nausea followed by vomiting,  abdominal cramps,
    diarrhea,  excessive salivation, headache, giddiness, dizziness,  weakness,
    tightness  in chest, blurring of vision, tearing, slurring of speech,
    confusion,  difficulty  breathing, convulsions, coma and even death
    (*Gosselin 1976).

    Medical  Conditions  Generally Aggravated by  Exposure:   Not Found

    Emergency and  First Aid Procedures:  Emergency treatment is  similar to
    that for parathion poisoning (*Rumack  1975 to Present)  and includes:
    moving victim to fresh air  and calling emergency medical care.  If not
    breathing,  give  artificial  respiration.  If breathing is difficult, give
    oxygen.   In case of contact with material, immediately flush skin or eyes
    with running water for at least 15  minutes.  Speed in removing material
    from skin is of  extreme  importance.  Remove and isolate contaminated
    clothing and shoes at  the site.  Keep victim quiet and maintain normal
    body temperature.   Effects  may be delayed; keep victim under observation
    (DOT 1984,  Guide 55).
SECTION  VI -- USE  INFORMATION

    Insecticide;  acaricide  (*Farm Chemicals Handbook 1981); mitocide (Merck
    1983,  p. 1287).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING  AND USE
(Steps to  be Taken in Case  Material is Released or Spilled)

    (Non-Specific --  Organophosphate Pesticide)  Keep unnecessary people away;
    isolate hazard area and deny entry.  Stay upwind; keep out of low areas.
    Ventilate closed  spaces before entering them.  Wear positive pressure
    breathing apparatus and special protective clothing.  Remove and isolate
    contaminated clothing at the site.  Do not touch spilled material;  stop
    leak if you can do it without risk.  Use water spray to reduce vapors.
    Small  spills:  take up  with  sand or other noncombustible absorbent
    material and place into containers for later disposal.  Large spills:
    dike far ahead of spill for  later disposal (DOT 1984, Guide 55).

-------
                                           CAS Registry Number:  3691-35-8
                                           Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31.  1985
                                                   Revision:
CHEMICAL IDENTITY -- CHLOROPHACINONE

CAS Registry Number:  3691-35-8

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 2,  pp.  514-515)
1,3-Indandione, 2-((p-Chlorophenyl)Phenylacetyl-;  2-[(4-Chlorophenyl)
Phenylacetyl]-lH-indene-l,3(2H)-dione; 2-[(p-chlorophenyl)phenyl- acetyl]-
1,3-indandione; LM91; CAID; Drat; Liphadione; Quick; Raviac; Rozol; Delta;
Microzul;  Muriol; 2-(2-Pheny1-2-(4-chlorophenyl)acetyl)-1,3-Indandione;
Ramucide;  Ranac; Ratoraet;  Topitox;  lH-Indene-l,3(2H)-Dione,
2-[(4-Chlorophenyl)Phenylacetyl]-;  Afnor; 2-(alpha-p-Chlorophenylacetyl)Indane-
1,3-Dione;  2(2-(4-Chlorophenyl)-2-Phenylacetyl)Indan-l,3-Dione

Chemical Formula:   C  H  CIO

Molecular Weight:  374.82


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD_  oral (mouse)

    1.06 mg/kg (^NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not  Found

    Specific Gravity (H~0=l):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   284°F,  140°C  (Merck 1983,  p. 302)

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate  (Butyl acetate=l):   Not  Found

-------
                                            CAS  Registry  Number:  3691-35-8
                                            Page 2 of 4
                         CHLOROPHACINONE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility  in Water:  Very sparingly soluble  (Merck  1983, p. 302)

    Appearance and Odor:  Crystals (Merck 1983, p. 302).  Commercially
    available  as oil concentrate and as dust concentrate  (Gosselin 1984, p.
    11-348).


SECTION  III  -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing  Methods:   (Non-Specific  -- Coumarin Derivative Pesticide,
    Solid, n.o.s.)  Small fires:  dry chemicals,  carbon dioxide, water spray
    or foam.   Large fires:  water spray, fog or  foam.  Move container from
    fire area  if you can do so without risk. Fight  fire  from maximum
    distance.  Dike fire control water for  later  disposal; do not scatter the
    material  (DOT  1984, Guide 55).

    Special Fire  Fighting  Procedures:   (Non-Specific -- Coumarin Derivative
    Pesticide, Solid, n.o.s.)  Container may explode in heat of fire.  Keep
    unnecessary people away; isolate hazard area  and deny entry.  Stay upwind;
    keep out of low areas.  Ventilate closed spaces  before entering them.
    Wear positive  pressure breathing apparatus  and special protective
    clothing.  Remove and isolate contaminated  clothing at the site.  If water
    pollution  occurs, notify appropriate authorities (DOT 1984, Guide 55).

    Unusual Fire  and Explosion Hazards:   (Non-Specific --  Coumarin
    Derivative Pesticide, Solid, n.o.s.) Fire  may produce irriating or
    poisonous  gases.  Runoff from fire control  water may  give off poisonous
    gases. Runoff from fire control or dilution  water may cause pollution
    (DOT 1984, Guide 55).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid): Not Found

-------
                                            CAS Registry Number:   3691-35-8
                                            Page 3 of 4
                         CHLOROPHACINONE
SECTION  IV -- REACTIVITY DATA  (Continued)

    Hazardous  Decomposition or Byproducts:  When heated it  emits toxic
    fumes  of chlorides  (Sax  1984, p. 748).

    Hazardous  Polymerization:   May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions to Avoid:   Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:   Yes  (Sax 1984, p. 749)
                      Ingestion:  Yes (Sax 1984,  p.  749)

    Health Hazards  (Acute, Delayed,  and  Chronic):  Chlorophacinone is
    highly toxic orally  and by skin absorption (Sax 1984,  p.  749).  The
    probable oral lethal dose  for humans is less than 5 mg/kg to  50 mg/kg, or
    between a taste  (less than 7 drops) and 1 teaspoonful  for a  150 Ib.  (70
    kg) person (Gosselin 1984, p. 11-1335).

    Signs and Symptoms  of Exposure:  Symptoms are similar to those  of
    warfarin (Gosselin 1984, p.  11-1335).  Symptoms develop after a few  days
    or a few weeks of repeated ingestion and include nosebleed and bleeding
    gums;  pallor and sometimes a rash; massive bruises, especially of the
    elbows, knees, and buttocks; blood in urine and feces; occasionally
    paralysis from cerebral hemorrhage; and hemorrhagic shock and death
    (Gosselin 1984,  p. III-396).  (Non-Specific -- Coumarin Derivative
    Pesticide,  Solid, n.o.s.)  Contact may cause burns to  skin and eyes  (DOT
    1984,  Guide  55).

    Medical Conditions Generally Aggravated by Exposure:  Not  Found

    Emergency and  First Aid Procedures:  (Non-Specific -- Coumarin
    Derivative,  Pesticide, Solid, n.o.s.)  Move victim to  fresh  air; call
    emergency medical care.  If not breathing, give artificial respiration.
    If breathing is  difficult, give oxygen.  In case of contact .with material,
    immediately  flush skin or  eyes with running water for  at least 15
    minutes.  Speed  in removing  material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes at  the site.  Keep
    victim quiet and maintain  normal body temperature.  Effects  may be
    delayed; keep victim under observation (DOT 1984, Guide 55).

-------
                                           CAS Registry Number:   3691-35-8
                                           Page 4 of 4
                         CHLOROPHACINONE
SECTION  VI  - USE INFORMATION

    Anticoagulant rodenticide (Merck 1983, p. 302).  Chronic  acting, multiple
    dose rodenticide (Buchel 1983, p.  222).


SECTION  Vlf -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be  Taken in Case Material  is Released or Spilled)

    Wear full protective clothing and eye protection (see Section V above).
    (Non-Specific -- Coumarin Derivative, Pesticide, Solid, n.o.s.)  Do not
    touch spilled material; stop leak if you can do so without  risk.  Use
    water spray to reduce vapors.  Small spills:  absorb with sand or other
    non-combustible absorbent material and place into containers for later
    disposal.  Large spills:  dike far ahead of spill for later disposal (DOT
    1984,  Guide 55).
COMMENTS:

    Sources  searched but no information found:
        ACGIH  1980
        Clayton and Clayton 1981-82
        Verschuren 1983
        Weast  1979

-------
                                           CAS Registry Number:  3734-97-2
                                           Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- AMITON OXALATE

CAS Registry Number:  3734-97-2

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 3, p. 150)
Phosphorothioic Acid, S-(2-Diethylamino)ethyl) 0,0-Diethyl Ester, Oxalate
(1:1);  Chipman 6199; Chipman R-6,199; Citram; S-(2-Diethylaminoethyl)
0,0-Diethylphosphorothioate Hydrogenoxalate; 0,0-Diethyl-S-(2-Diethylamino)
Ethylphosphorothioate Hydrogen Oxalate; 0,0-Diethyl S-(beta-Diethylamino)Ethyl
Phosphorothiolate Hydrogen Oxalate;  0,0-Diethyl S-(2-Ethyl-N,N-Diethylamino)
Phosphorothioate Hydrogen Oxalate; ENT 20,993; Hydrogen Oxalate of Amiton;
Tetram 75;  Tetram, Acid Oxalate;  Tetram Monooxalate

Chemical Formula:   C,-.H0.NO,PS»C.H00.
                    10  24  3    224

Molecular Weight:  359.42


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:   LD   oral (rat) 3
    mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not  Found

    Specific Gravity (H  0=1):  Not Found

    Vapor  Pressure  (mmHg):  Not Found

    Melting Point:   208-210°F, 98-99°C (Merck 1983,  p.  73)

    Vapor  Density (AIR=1):  Not  Found

    Evaporation  Rate (Butyl acetate=l):   Not Found

-------
                                      CAS Registry Number:  3734-97-2
                                      Page 2 of 4
                          AMITON OXALATE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Solubility  in Water:  Not Found

    Appearance and Odor:  Crystals  (Merck 1983, p. 73)


SECTION  III  -- FIRE AND EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing  Methods:   (Non-Specific -- Organophosphorus Pesticide,
    n.o.s.)  Extinguish with dry chemical, carbon dioxide,  water spray, fog,
    or foam (DOT 1984, Guide 55).

    Special Fire Fighting  Procedures:   (Non-Specific -- Organophosphorus
    Pesticide, n.o.s.)  Wear positive pressure breathing apparatus and special
    protective clothing.  Move container from fire area if you can do it
    without risk.  Fight fire from maximum distance.  Dike fire control water
    for later disposal; do not scatter  the material (DOT 1984, Guide 55).

    Unusual Fire  and Explosion  Hazards:   (Non-Specific -- Organophosphorus
    Pesticide, n.o.s.)  Container may explode in heat of fire  (DOT 1984, Guide
    55).


SECTION  IV -- REACTIVITY  DATA

    Stability:  Unstable:  Not Found
                Stable:  Not  Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or  Byproducts:  Not Found

    Hazardous Polymerization:  May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  3734-97-2
                                      Page 3 of 4
                          AMITON OXALATE
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Hawley 1981, p.  1009)
                      Skin:   Yes  (Non-Specific -- Organophsophorus
                              Pesticide) (Hayes 1982, p.  301)
                      Ingestion:  Yes (Hawley 1981,  p.  1009)

    Health Hazards  (Acute, Delayed,  and Chronic):   It is a cholinesterase
 .   inhibitor (Hawley  1981, p. 1009).

    Signs and Symptoms of Exposure:   (Non-Specific -- Organophosphorus
    Pesticide)  Symptoms include headache, giddiness, nervousness,  blurred
    vision,  weakness,  nausea,  cramps, diarrhea, and discomfort in the  chest.
    Signs  include sweating, miosis, tearing, salivation  and other excessive
    respiratory  tract  secretion, vomiting, cyanosis, uncontrollable muscle
    twitching followed by  muscular weakness, convulsions,  coma,  loss of
    reflexes,  and loss of  muscular control (Hayes 1982,  p.  301).

    Medical  Conditions Generally Aggravated by Exposure:   Not  Found

    Emergency and  First Aid  Procedures:  (Non-Specific -- Organophosphorus
    Pesticide, n.o.s.)   Move victim to fresh air; call emergency medical
    care.   If not breathing, give artificial respiration.   If  breathing  is
    difficult, give  oxygen.  In  case of contact with material, immediately
    flush  skin or eyes with running water for at least 15  minutes.   Speed in
    removing material  from skin  is of extreme importance.   Remove and  isolate
    contaminated clothing  and  shoes at the site.  Keep victim  quiet and
    maintain normal  body temperature.  Effects may be delayed; keep victim
    under  observation  (DOT 1984, Guide 55).


SECTION  VI --  USE INFORMATION

    It is  used as an insecticide (Hawley 1981, p. 1009).

-------
                                      CAS Registry Number:  3734-97-2
                                      Page 4  of 4
                          AMITON OXALATE
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    (Non-Specific --  Organophosphorus Pesticide, n.o.s.)  Keep unnecessary
    people away;  isolate  hazard area and deny entry.  Stay upwind;  keep  out  of
    low areas.  Ventilate closed spaces before entering them.   Wear positive
    pressure breathing apparatus and special protective clothing.   Do  not
    touch spilled material; stop leak if you can do it without risk.   Use
    water spray to reduce vapors.  Small spills:  take up with sand or other
    noncombustible absorbent material and place into containers for later
    disposal.   Small  dry  spills;  with clean shovel place material  into  clean,
    dry container and cover; move containers from spill area.   Large spills:
    dike far ahead of spill for later disposal (DOT 1984, Guide 55).
COMMENTS

    The following sources were searched but no information was  found:
        Sax  1984
        NFPA 1984
        ACGIH 1983-1984
        NIOSH/OSHA 1978
        Farm Chemicals Handbook 1984
        Encyc Occupat Health and Safety 1983
        Buchel 1983
        Weast 1979
        Doull 1980
        Arena 1979

-------
                                     CAS Registry Number:  3735-23-7
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- METHYL PHENKAPTON

CAS Registry  Number:  3735-23-7

Synonyms (NIOSH-RTECS 1983 Synonyms, Volume 3, p.  140):  Phosphorodithioic
Acid,  S-(«2,5-Dichlorophenyl)Thio)Methyl) 0,0-Dimethyl Ester; S-(((2,5-
Dichlorophenyl)Thio)Methyl)  0,0-Dimethyl Phosphorodithioate; 0,0-Dimethyl
S-(2,5-Dichlorophenylthio)Methyl Phosphorodithioate; ENT 25,554-X;  G 30494;
Geigy 30494; Methanethiol,  ((2,5-Dichlorophenylthio)-, S-Ester with
0,0-Dimethyl Phosphorodithioate; Methyl Phencapton

Chemical Formula:   C.H. Cl-0 PS,

Molecular Weight:  349.25


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  ID - oral  (mouse)

    11 mg/kg (*NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H  0=1):  Not Found

    Vapor Pressure (mmHg):   Not Found

    Melting Point:   Not  Found

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:   Not Found

    Appearance and Odor:   Not Found

-------
                                      CAS Registry Number:  3735-23-7
                                      Page 2 of 4
                         METHYL PHENKAPTON
SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:   (Non-Specific -- Organophosphorus Pesticide,
    n.o.s.)  This material  may burn, but does not ignite readily.   For  small
    fires, use dry chemical,  carbon dioxide, water spray, or foam.   For large
    fires, use water spray,  fog, or foam (DOT 1984, Guide 55).

    Special  Fire Fighting Procedures:  (Non-specific -- Organophosphorus
    Pesticide,  n.o.s.)   Stay upwind; keep out of low areas.   Move  containers
    from fire area if you can do it without risk.   Fight fire from maximum
    distance.   Dike fire control water for later disposal;  do not  scatter the
    material.   Wear positive pressure breathing apparatus and special
    protective clothing  (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific  -- Organophosphorus
    Pesticide,  n.o.s.)   Cylinder may explode in heat of fire (DOT  1984, Guide
    55).   Heat  may cause decomposition and evolution of highly toxic fumes  of
    phosphorus  oxides and chlorides (Sax 1984, p.  1904).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not Found

    Hazardous  Decomposition  or Byproducts:  Not Found

    Hazardous  Polymerization:  May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  3735-23-7
                                      Page 3 of 4
                         METHYL  PHENKAPTON
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (Non-Specific -- Organophosphorus
                                  Pesticide) (Hayes 1982, p. 301)
                       Skin:   Yes  (Non-Specific  -- Organophosphorus
                              Pesticide)  (Hayes  1982, p. 301)
                       Ingestion:  Yes  (Non-Specific -- Organophosphorus
                                  Pesticide) (Hayes 1982, p. 301)

    Health Hazards  (Acute, Delayed,  and Chronic):   (Non-Specific  -- Organic
    Phosphorus Insecticides)   Organic phosphorus insecticides are absorbed by
    the skin,  as well as  by the  respiratory and  gastrointestinal tracts (Hayes
    1982,  p.  301).   Toxic hazard rating  (oral) is high  (Sax 1984,  p.  1904).

    Signs and Symptoms  of Exposure:   (Non-Specific -- Organic Phosphorus
    Insecticides)  Symptoms are  secondary to cholinesterase inhibition,
    headache,  giddiness,  blurred vision, nervousness, weakness, nausea,
    cramps,  diarrhea, and discomfort in  the chest.  Signs include sweating,
    tearing,  salivation,  vomiting, cyanosis, convulsions, coma, loss  of
    reflexes  and loss of  sphincter control (Hayes 1982, p. 302).

    Medical Conditions  Generally Aggravated by  Exposure:  Not Found

    Emergency and  First Aid Procedures:  (Non-Specific -- Organophosphorus
    Pesticide, n.o.s.)  Move  victim to  fresh air; call  emergency medical
    care.   If not breathing,  give artificial respiration.  If breathing is
    difficult, give oxygen.   In  case of  contact  with material, immediately
    flush skin or eyes  with running water for at least  15 minutes.  Speed in
    removing  material from skin  is of extreme importance.  Remove and isolate
    contaminated clothing and shoes at  the site.  Keep  victim quiet and
    maintain  normal body  temperature.   Effects may be delayed; keep victim
    under observation (DOT 1984, Guide  55).


SECTION  VI  --  USE INFORMATION

    Acaricide, insecticide (Farm Chemicals Handbook  1984, p. C-150).   Not
    registered as a pesticide in the U.S. (USEPA/Pesticide Index 1985).

-------
                                      CAS Registry Number:   3735-23-7
                                      Page 4 of 4
                        METHYL PHENKAPTON
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or  Spilled)

    (Non-Specific -- Organophosphorus Pesticide,  n.o.s.)   Stay upwind; keep
    out of low areas.  Ventilate closed spaces before entering them.  Wear
    positive pressure breathing apparatus and special protective clothing.  Do
    not touch spilled material; stop leak if you can  do  it without risk.  Use
    water  spray to  reduce vapors.  Small spills:  take up with sand or other
    noncombustible  absorbent material and place into  containers for later
    disposal.   Small dry spills:  with clean shovel place material into clean,
    dry containers  and cover; move containers from  spill area.  Large spills:
    dike far ahead  of spill for later disposal (DOT 1984, Guide 55).


COMMENTS:

    Sources searched but no information found:
        Buchel 1983
        Clayton and Clayton 1981-82
        Weast  1979
        Hawley 1981
        Encyc  Occupat Health and Safety 1983

-------
                                     CAS Registry Number:  3878-19-1
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- FUBERIDAZOLE

CAS Registry  Number:  3878-19-1

Synonyms:  (NIOSH/RTECS 1983  Synonyms, Volume 1,  p.  577)  Benzimidazole,
2-(2-Furyl)-;  B-33172; BAY 33172; Bayer 33172;  IH-Benzimidazole,
2-(2-Furanyl)-; Fuberidatol;  Fuberisazol; Fubridazole;  Furidazol;  Furidazole;
2-(2-Furyl)Benzimidazole;  2-(2'-Furyl)-Benzimidazole; Voronit; Voronite;
W VII/117

Chemical Formula:   C,..H0N00
                    11  o  2.
Molecular  Weight:  184.21


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC_0 inhalation

    (rat)  0.33 mg/liter (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H  0=1):  Not Found

    Vapor Pressure  (mmHg):   Not  Found

    Melting Point:   543-550°F, 284-288°C (Farm  Chemicals Handbook  1984,
    p.  C108);  280°C decomposes  (Worthing 1983,  p.  296)

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

-------
                                      CAS Registry Number:   3878-19-1
                                      Page 2 of 4
                           FUBERIDAZOLE
SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS (Continued)

    Solubility  in Water:  Practically insoluble (Farm  Chemicals Handbook
    1984,  p. C108)

    Appearance and Odor:  Crystalline powder (Farm  Chemicals Handbook 1984,
    p.  C108)


SECTION  III  --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing  Methods:  This compound is  a  fungicide (Buchel 1983, p.
    314).   Extinguish with dry chemical,  carbon  dioxide, water spray, fog,  or
    foam (DOT  1984,  Guide 55).

    Special Fire Fighting Procedures:   This compound  is a fungicide  (Buchel
    1983,  p. 314).   Move container from fire area  if  you can do so without
    risk.   Fight fire from maximum distance.  Dike fire control water for
    later  disposal;  do not scatter the material.   Keep unnecessary people
    away;  isolate hazard area and deny entry.  Stay upwind; keep out of low
    areas.  Ventilate closed spaces before entering them.  Wear positive
    pressure breathing apparatus and special protective clothing.  Remove and
    isolate contaminated clothing at the site (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:  When heated to  decomposition,  it
    emits  toxic fumes of nitrogen oxides (Sax 1984, p. 1465).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it  emits toxic  fumes of nitrogen oxides (Sax 1984, p. 1465).

-------
                                      CAS Registry Number:   3878-19-1
                                      Page 3 of 4
                           FUBERIDAZOLE
SECTION  IV --  REACTIVITY DATA (Continued)

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:   Yes (Sax 1984,  p.  1465)
                      Skin:  Yes (Sax 1984, p.  1465)
                      Ingestion:   Yes (Sax 1984,  p.  1465)

    Health Hazards (Acute,  Delayed,  and Chronic):  It is classified as
    moderately toxic.  Its probable oral lethal  dose  in  humans is 0.5-5 g/kg
    or between 1  ounce and 1 pint for a 70 kg (150 Ib.)  person (Gosselin 1984,
    p. 11-315).

    Signs and Symptoms of  Exposure:  Not Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:   This  compound is a fungicide
    (Buchel  1983,  p. 314).  Move victim to fresh air;  call emergency medical
    care.   If not  breathing, give artificial respiration.  If breathing is
    difficult,  give oxygen.   In case of contact  with  material, immediately
    flush skin or  eyes with running water  for at least 15 minutes.  Speed in
    removing  material from skin is of extreme importance.  Remove and isolate
    contaminated  clothing and shoes at the site.   Keep victim quiet and
    maintain  normal body temperature.  Effects may be delayed; keep victim
    under observation (DOT 1984, Guide 55).
SECTION  VI  --  USE INFORMATION

    Uses include cereal seed dressing (Buchel 1983,  p.  314); and fungicidal
    non-mercurial seed dressing with special action  against fusarium (Farm
    Chemicals Handbook 1984, p. C108).   Not registered  as a pesticide in the
    U.S. (USEPA/Pesticide Index 1985).

-------
                                       CAS  Registry  Number:  3878-19-1
                                       Page 4 of 4
                            FUBERIDAZOLE
SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING  AND USE
(Steps to be Taken in Case  Material is Released or Spilled)

    This compound is  a fungicide (Buchel  1983, p. 314).  Do not touch spilled
    material;  stop leak if  you can do so without risk.  Use water spray to
    reduce vapors.  Wear self-contained breathing apparatus and full
    protective clothing.  Small  spills:  absorb with sand or other
    noncombustible absorbent material and place into containers for later
    disposal.   Small  dry spills:  with clean shovel place material into clean,
    dry container and cover; move containers from spill area.  Large spills:
    dike far ahead of spill for  later disposal (DOT 1984, Guide 55).


COMMENTS

    Sources searched  but no information found:
        Hawley 1981
        Merck 1983
        Hayes  1982
        Weiss  1980
        Weast  1979
        DASE 1980
        ACGIH 1983
        NIOSH/OSHA 1978
        Student 1981
        Clayton and Clayton 1981-82
        Doull  1980
        NFPA 1984
        Verschueren 1983
        Physicians' Desk Reference 1985
        Oilman 1985

-------
                                           CAS  Registry Number:  4044-65-9
                                           Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October 31.  1985
                                                  Revision:
CHEMICAL IDENTITY -- BITOSCANATE

CAS Registry Number:  4044-65-9

Synonyms:  (NIOSH/RTECS 1983  Synonyms, Volume  2, p. 585)  Isothiocyanic
Acid, 1,4-Phenylenedi-; Biscomate; 1,4-Diisothiocyanatobenzene;  Isothiocyanic
Acid p-Phenylene Ester; Jonit;  Phenylene-l,4-Diisothiocyanate; Phenylene
Thiocyanate

Chemical Formula:   C H,N_S2

Molecular  Weight:  192.26


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not  Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD   oral  (rat) 21

    rag/kg (^NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure  (mmHg):   Not  Found

    Melting Point:   270°F, 132°C (Sax 1984, p. 2185)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:  Odorless, colorless  crystals  (Sax 1984, p.  2185).

-------
                                           CAS Registry Number:   4044-65-9
                                           Page 2 of 3
                           BITOSCANATE
SECTION  III  --  FIRE AND EXPLOSION  HAZARD  DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing  Methods:  Not Found

    Special Fire  Fighting  Procedures:   Not Found

    Unusual Fire and Explosion  Hazards:   Not  Found


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or  Byproducts:  When heated to decomposition,
    it emits  very toxic fumes  of nitrogen oxides and sulfur oxides  (Sax  1984,
    p. 2185).

    Hazardous Polymerization:   May Occur:   Not  Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation: Not  Found
                      Skin:  Not Found
                      Ingestion:  Yes  (NIOSH/RTECS 1983, Volume  2, p. 585)

    Health Hazards (Acute,  Delayed,  and Chronic):  This  material is highly
    toxic  if  ingested.  It is  a  central nervous system and gastrointestinal
    toxin  in  humans (Sax 1984, p. 2185).

    Signs  and Symptoms of  Exposure:   Not  Found

    Medical Conditions Generally Aggravated by  Exposure:  Not Found

-------
                                            CAS Registry Number:  4044-65-9
                                            Page 3 of 3
                           BITOSCANATE
SECTION  V --  HEALTH HAZARD DATA (Continued)

    Emergency  and First Aid Procedures:   (Non-Specific -- Cyanide or
    Cyanide Mixture, Dry)  Move victim to  fresh  air; call emergency medical
    care.   If breathing is difficult,  give oxygen.  In case of contact with
    material, immediately flush skin or eyes with running water for at least
    15 minutes.  Speed in removing material from skin is of extreme
    importance.  Remove and isolate contaminated clothing and shoes at the
    site.   Keep victim quiet and maintain  normal body temperature.  Effects
    may be delayed, keep victim under observation (DOT 1984, Guide 55).
SECTION  VI  --  USE INFORMATION

    Preparation  and use as anthelmintic (Merck  1983, p. 182).


SECTION  VII -- PRECAUTIONS FOR SAFE  HANDLING  AND USE
(Steps to  be  Taken in Case Material  is Released or Spilled)

    Not Found


COMMENTS

    Sources searched but no information found:
        Weast 1979
        Hayes 1975
        Doull 1975
        Weiss 1980
        Verschueren 1983
        Clayton  and Clayton 1981-82
        Physicians' Desk Reference 1985
        Student  1981
        NFPA  1984
        Hayes 1982
        Farm  Chemicals Handboook 1984
        Hawley 1981

-------
                                     CAS Registry Number:  4098-71-9
                                     Page 1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- ISOPHORONE DIISOCYANATE

CAS Registry Number:  4098-71-9

Synonyms (NIOSH/RTECS 1983 Synonyms,  Volume 2,  p.  556):   Isocyanic Acid,
Methylene(3,5,5-Trimethyl-3,1-Cyclohexylene) Ester; Cyclohexane, 5-Isocyanato-
l-(Isocyanatomethyl)-l,3,3-Trimethyl-; IPDI; 3-Isocyanatomethyl-3,5,5-
Trimethylcyclohexylisocyanate;  Isophorone Diamine Diisocyanate

Chemical Formula:   C,0H10N00.
                    l/  lo z /

Molecular Weight:  222.32


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   TWA 0.01 ppm, 0.09 mg/m3  (skin) (ACGIH 1985,  p.  21)

    IDLH:  Not Found

    Other Limits Recommended:  Occupational exposure to diisocyanates
    recommended standard - Air:  TWA 5 ppb; Ceiling limit 20 ppb/10 minutes
    (NIOSH/RTECS 1983,  Volume  2, p.  556).  Toxicity information:  LC

    inhalation (rat) 0.26 mg/liter/4 hours (*NIOSH/RTECS 1985).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H  0=1):  Not Found

    Vapor Pressure  (mmHg):  Not Found

    Melting Point:   Not  Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

-------
                                      CAS  Registry Number:  4098-71-9
                                      Page 2 of 4
                     ISOPHORONE  DIISOCYANATE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility  in Water:  Not Found

    Appearance and Odor:  Not Found


SECTION  III  --  FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):   Not  Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing  Methods:   Small fires:  dry chemical,  carbon dioxide,
    water  spray or  foam.  Large fires:   water spray, fog or foam.   Move
    container  from  fire area if you  can do so without risk.  Fight  fire from
    maximum distance.  Dike fire control water  for later disposal;  do not
    scatter the material (DOT 1984,  Guide 55).

    Special Fire Fighting  Procedures:   Keep unnecessary people away;
    isolate hazard  area and deny entry.  Stay upwind; keep out of  low areas.
    Ventilate  closed spaces before entering them.  Wear positive pressure
    breathing  apparatus and special  protective  clothing.   Remove and  isolate
    contaminated clothing at the site  (DOT 1984, Guide 55).

    Unusual Fire  and Explosion  Hazards:  When  heated to decomposition,  it
    emits  toxic fumes of nitrogen oxides (Sax 1984, p.  1648).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it emits toxic  fumes of nitrogen oxides (Sax 1984,  p. 1648).

    Hazardous Polymerization:  May  Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  4098-71-9
                                      Page 3 of 4
                      ISOPHORONE DIISOCYANATE
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Sax 1984, p. 1648)
                      Skin:   Yes  (Sax 1984, p.  1648)
                      Ingestion:  Not Found

    Health Hazards  (Acute, Delayed,  and  Chronic):   This material is highly
    toxic by inhalation  and moderately toxic through the skin (Sax  1984, p.
    1648).

    Signs and Symptoms of Exposure:  (Non-Specific -- Isocyanates)
    Isocyanates  can cause  itching  and skin rashes, tearing  of the eyes,
    inflammation of the  mucous membrane of the nose, and lung problems  (Encyc
    Occupat Health and Safety  1983, p. 1161).

    Medical Conditions Generally Aggravated by  Exposure:   (Non-Specific  --
    Isocyanates)  People with  skin or respiratory problems  should avoid
    exposure (Encyc Occupat Health and Safety 1983, p.  1162).

    Emergency and  First Aid  Procedures:  Move victim to fresh air;  call
    emergency medical care.  If not breathing, give artificial respiration.
    If breathing is difficult, give oxygen.  In case of contact with material,
    immediately  flush skin or  eyes with running water for at least  15
    minutes.  Speed in removing material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes at the site.   Keep
    victim quiet and maintain  normal body temperature.   Effects may be
    delayed; keep victim under observation (DOT  1984, Guide 55).


SECTION  VI --  USE INFORMATION

    Not Found
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    Avoid inhalation.  Wear proper respiratory protection and protective
    clothing (see Section V above).  Do not touch spilled material;  stop  leak
    if you can do so without risk.  Use water spray to reduce vapors.   Small
    spills:   absorb with sand or other non-combustible absorbent material and
    place into containers for later disposal.  Small dry spills:  with clean
    shovel place material into clean, dry container and cover; move  containers
    from spill area.   Large spills:  dike far ahead of spill for later
    disposal (DOT 1984, Guide 55).

-------
                                      CAS Registry Number:   4098-71-9
                                      Page 4 of 4
                      ISOPHORONE DIISOCYANATE
COMMENTS:

    Sources  searched but no information found:
        NIOSH/OSHA  1978
        Hawley  1981
        Weast 1979
        Merck 1983
        NFPA 1984
        Student  1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton  and Clayton 1981-82
        Arena 1979
        Gosselin 1984
        Buchel  1983
        Farm Chemicals Handbook 1984
        Hayes 1982
        Physicians' Desk Reference 1985
        Oilman  1985

-------
                                           CAS Registry Number:   4104-14-7
                                           Page  1  of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  PHOSACETIM

CAS Registry Number:  4104-14-7

Synonyms:  Phosphoramidothioic Acid, Acetimidoyl-,  0,0-bis(p-Chlorophenyl)
Ester;  BAY 38819; Bayer 38819; DRC-714;  Gophacide; Phosazetim;
Phosphoramidothioic Acid,  (1-Iminoethyl)-,  0,0-bis(4-Chlorophenyl) Ester

Chemical Formula:   C,.H,,C1.N.O.PS
                    14 13  222

Molecular  Weight:  375.22


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity  information:   LD5_ oral (rat) 3.7

    mg/kg (*NIOSH/RTECS 1985)


SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:  Not Found

-------
                                           CAS Registry Number:   4104-14-7
                                           Page 2 of 3
                            PHOSACETIM
SECTION  III  --  FIRE AND EXPLOSION  HAZARD  DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not Found
        DEL:  Not Found

    Extinguishing Methods:  Not Found

    Special.Fire  Fighting  Procedures:   Not Found

    Unusual Fire and Explosion  Hazards:   When heated to decomposition,
    emits  toxic  fumes, primarily chlorides and oxides of nitrogen, sulfur and
    phosphorus (Sax 1984, p.  464).


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:   Extreme heat  (Sax  1984, p. 464)

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition  or  Byproducts:  When heated to decomposition,
    emits  toxic  fumes, primarily chlorides and oxides of nitrogen, phosphorus
    and sulfur (Sax 1984, p.  464).

    Hazardous Polymerization:  May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions to Avoid:   Not Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Not  Found
                      Skin:   Yes  (Sax  1984, p.  464)
                      Ingestion:  Yes  (Sax 1984, p.  464)

    Health Hazards (Acute, Delayed,  and Chronic):  Highly toxic by mouth
    and skin  exposure (Sax 1984, p. 464).

    Signs  and Symptoms of Exposure:  Not Found

-------
                                          CAS Registry Number:  4104-14-7
                                          Page 3 of 3
                           PHOSACETIM
SECTION V -- HEALTH HAZARD DATA (Continued)

    Medical Conditions Generally Aggravated  by Exposure:   Not Found

    Emergency and First Aid Procedures:   Not  Found


SECTION VI -- USE INFORMATION

    Not Found
SECTION VII --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    Avoid skin contact  (see Section V above).
COMMENTS

    Sources searched  but no information found:
       DOT 1984
       Hawley 1981
       Hayes 1982
       Merck 1983

-------
                                     CAS Registry Number:  4170-30-3
                                     Page 1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- CROTONALDEHYDE

CAS Registry Number:  4170-30-3

Synonyms:  2-Butenal;  Crotonal; Crotonic Aldehyde; Crotylaldehyde

Chemical Formula:   C,H,0
                    4  6
Molecular  Weight:  70.09


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  TWA 2 ppm (6  mg/m3)  (NIOSH/OSHA 1978, p. 72)

    ACGIH TLV:   TWA  2 ppm (6 mg/m3);  STEL 6 ppm (18 mg/m3)  (*ACGIH 1980)

    IDLH:  400 mg/m3 (NIOSH/OSHA 1978,  p.  72)

    Other Limits Recommended:  Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   219°F, 104°C (-Merck 1976)

    Specific Gravity (H 0=1):  0.853 at  20°C  (-Merck 1976)

    Vapor Pressure  (mmHg):   19  at  20°C/20°C (-Merck 1976)

    Melting Point:   -105°F,  -76.5°C (-Merck  1976)

    Vapor Density (AIR=1):  2.41 (-Clayton  and  Clayton 1981-82)

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility in Water:  18.1  g/100 ml  (Merck 1983,  p. 372)

    Appearance and  Odor:  Water-white to straw-colored  liquid (*NFPA 1978);
    pungent,  suffocating odor  (-Hawley  1977).

-------
                                      CAS Registry Number:  4170-30-3
                                      Page 2 of 4
                            CROTONALDEHYDE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  55°F (OC) (*Hawley 1977)
    Flammable  Limits:
        LEL:   2.95% v/v (Merck 1983, p. 372)
        UEL:   15.5% v/v (Merck 1983, p. 372)

    Extinguishing Methods:  Small fires:  dry chemical, carbon dioxide,
    water  spray and foam.   Large  fires:  water spray, fog or foam (DOT 1984,
    Guide  28).

    Special  Fire Fighting Procedures:  Wear positive pressure breathing
    apparatus  and full protective clothing.  Move container from fire area if
    you can do so without risk.  Dike fire control water for later disposal;
    do not scatter the material.  Spray  cooling water on containers that  are
    exposed to flames until well after  fire is out.  Withdraw immediately in
    case of rising sound from venting safety device or any discoloration  of
    tank due to fire.  Isolate for one-half mile radius if tank car or truck
    is involved in fire  (DOT 1984, Guide 28).

    Unusual Fire and Explosion Hazards:  Flammable/combustible material;
    may be ignited by heat, sparks or flames.  Vapor may travel to a source of
    ignition and flash back.  Container may explode in heat of fire.  Vapor
    explosion  and poison hazard indoors, outdoors or in sewers.  Runoff to
    sewer  may  create fire or explosion hazard.


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (*Merck 1976)

        Conditions to Avoid:  Readily resinifies to dimer when pure and
        slowly oxidizes to  crotonic acid (*Merck 1976).  Altered by light and
        air (*Hawley 1977).

    Incompatibility (Materials to Avoid):  Readily converted by oxygen to
    hazardous  peroxides and acids (*NFPA 1978) and is incompatible with
    caustics,  ammonia, organic amines, mineral acids, and strong oxidizers
    (NIOSH/OSHA 1978, p. 72).

    Hazardous  Decomposition or Byproducts:  Peroxides and acids (*NFPA
    1978).

-------
                                      CAS Registry Number:  4170-30-3
                                      Page 3 of 4
                           CROTONALDEHYDE
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Polymerization:   May Occur:   Yes  (*NFPA 1978)
                               May Not Occur:

        Conditions  to Avoid:   Polymerization may take place at high
        temperatures  (*NFPA  1978).


SECTION  V- --  HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Gosselin 1976,  p.  11-186)
                      Skin:   Yes  (Gosselin  1976, p. 11-186)
                      Ingestion:   Yes (Gosselin 1976,  p.  11-186)

    Health Hazards (Acute, Delayed,  and  Chronic):   This compound is an
    extreme eye,  respiratory,  and skin irritant and can cause  corneal damage
    (*NFPA 1978).   A  15  minute  exposure at 4.1 ppm is highly irritating to the
    nose and upper  respiratory  tract and causes tearing.   Brief exposure at 45
    ppm proved very disagreeable with prominent eye irritation ('VACGIH 1980).

    Signs and Symptoms of Exposure:  Irritated eyes, repiratory distress,
    and skin irritation  (NIOSH/OSHA  1978, p. 72).

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid Procedures:  Exposed skin or eyes should be
    washed with  copious  amounts of water for 15 minutes.   Remove contaminated
    clothing (*Rumack  1975 to  Present).  If not breathing,  give artificial
    respiration.  If breathing  is difficult, give oxygen.   Keep victim quiet
    and maintain normal  body temperature.  Effects may be  delayed,  keep victim
    under observation  (DOT 1984, Guide 28).


SECTION  VI --  USE INFORMATION

    Chemical intermediate  for  n-butanol, n-butyraldehyde,  crotonic  acid, and
    sorbic acid  ("SRI);  intermediate for 2-ethylhexyl alcohol, solvent,
    insecticides, tear gas,  organic  synthesis, and leather tanning  ('vHawley
    1977).  Not  registered as  a pesticide in the U.S. (USEPA/Pesticide Index
    1985).

-------
                                      CAS Registry Number:  4170-30-3
                                      Page 4 of 4
                           CROTONALDEHYDE


SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps  to  be Taken  in Case Material is Released or Spilled)

    Keep unnecessary people away; isolate hazard area and deny  entry.  Stay
    upwind; keep out of low areas.  Wear positive pressure breathing apparatus
    and special protective clothing.  Shut off ignition sources; no flares,
    smoking or flames in hazard area.   Do not touch spilled material; stop
    leak if you can do so without risk.  Use water spray to reduce vapors.
    Small  spills:  absorb with sand or other non-combustible  absorbent
    material and place into containers for later disposal.  Large spills:
    dike far ahead of spill for later disposal (DOT 1984,  Guide 28).

-------
                                           CAS Registry Number:   4301-50-2
                                           Page  1  of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  FLUENETIL

CAS Registry  Number:  4301-50-2

Synonyms:  (SANSS 1983 Synonyms)  4-Biphenylacetic Acid, 2-Fluoroethyl
Ester;  [1,1'-Biphenyl]-4-Acetic Acid, 2-Fluoroethyl Ester; beta-Fluoroethyl
4-Biphenylacetate; Fluenethyl; Lambrol;  M 2060; Mytrol; TH 367-1;
2-Fluoroethyl  4-Biphenylacetate (ACN)

Chemical Formula:   C,,H,..F00
                    10 15  2.

Molecular Weight:  258.31


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD   oral  (rat)

    6 mg/kg  (*NIOSH/RTECS  1985)


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity (H 0=1):  Not  Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   Not Found

    Vapor Density (AIR=l):  Not Found

    Evaporation Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:  Not Found

    Appearance and Odor:  Not Found

-------
                                      CAS Registry Number:  4301-50-2
                                      Page 2 of 4
                             FLUENETIL
SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  This compound is an insecticide  (Buchel 1983,
    p.  177).  Methods for  liquid insecticides are as follows.   Small fires:
    dry chemical,  carbon dioxide, water spray, or foam.   Large  fires:  water
    spray, fog, or foam.  Move container from fire area  if you  can do so
    without risk.  Fight fire from maximum distance.  Dike fire control water
    for later  disposal; do  not scatter the material (DOT 1984,  Guide 55).

    Special  Fire Fighting  Procedures:  This compound is  an insecticide
    (Buchel 1983,  p.  177).  Keep unnecessary people away;  isolate hazard area
    and deny entry.   Stay upwind; keep out of low areas.   Ventilate closed
    spaces before  entering  them.  Wear positive pressure breathing apparatus
    and special protective  clothing.  Remove and isolate contaminated clothing
    at  the site (DOT  1984,  Guide 55).

    Unusual Fire and Explosion Hazards:  Not Found
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:   Not Found
                 Stable:  Not Found

        Conditions  to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:   Not  Found
                               May  Not Occur:  Not Found

        Conditions  to Avoid:  Not Found


SECTION  V --  HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Not Found

-------
                                      CAS Registry Number:  4301-50-2
                                      Page 3  of 4
                             FLUENETIL
SECTION  V -- HEALTH HAZARD DATA

    Health Hazards  (Acute, Delayed, and Chronic):   Fluenitil  is highly
    toxic to mammals (Buchel  1983,  p.  177).

    Signs and Symptoms of Exposure:   Not Found

    Medical  Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  This compound is an insecticide
    (Buchel 1983,  p. 177).  For  liquid insecticides, move victim to fresh air;
    call emergency medical  care.   If not breathing, give artificial
    respiration.   If breathing is  difficult, give oxygen.  In case of contact
    with material, immediately flush skin  or eyes with running water for at
    least 15 minutes.   Speed  in  removing material from skin is of extreme
    importance.   Remove and isolate contaminated clothing and shoes at the
    site.   Keep  victim  quiet  and maintain  normal body temperature.  Effects
    may be delayed;  keep victim  under  observation (DOT 1984, Guide 55).


SECTION  VI --  USE INFORMATION

    This material has been  used  as  an  acaricide and insecticide (Farm
    Chemicals Handbook  1984,  p.  C-133).  Its main use was as a dormant spray
    for orchard  fruit.   It  is no longer made (Buchel 1983, p.  177).  Not
    registered as a pesticide in the U.S.  (USEPA/Pesticide Index 1985).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND USE
(Steps to be Taken in Case  Material is Released or Spilled)

    This compound is an insecticide (Buchel 1983, p. 177).  Procedures for
    liquid insecticides are as follows.  Keep unnecessary people away; isolate
    hazard area  and deny entry.  Stay  upwind; keep out of low areas.
    Ventilate closed spaces before entering them.  Wear positive pressure
    breathing apparatus and special protective clothing.  Remove and isolate
    contaminated clothing at  the site.  Do not touch spilled material; stop
    leak if you  can do  so without  risk.  Use water spray to reduce vapors.
    Small spills:   absorb with sand or other noncombustible absorbent material
    and place into containers for  later disposal.  Small dry spills:  with
    clean shovel place  material  into clean, dry container and cover; move
    containers from spill area.  Large spills:  dike far ahead of spill for
    later disposal (DOT 1984, Guide 55).

-------
                                      CAS Registry Number:   4301-50-2
                                      Page 4 of 4
                            FLUENETIL
COMMENTS
    Sources  searched but no information found:
        ACGIH 1983
        NIOSH/OSHA  1978
        Hawley 1981
        Weast 1979
        Merck 1983
        Sax  1984
        NFPA 1984
        Student 1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton and Clayton 1981-82
        Arena 1979
        Gosselin 1984
        Encyc Occupat Health and Safety 1983
        Hayes 1982
        Physicians' Desk Reference 1985
        Oilman 1985

-------
                                     CAS Registry Number:  4418-66-0
                                     Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October 31.  1985
                                                  Revision:
CHEMICAL  IDENTITY --  PHENOL,  2,2'-THIOBIS[4-CHLORO-6-METHYL-

CAS Registry Number:  4418-66-0

Synonyms:   o-Cresol, 6,6'-Thiobis[4-Chloro-;  Chlorbisan;
2,2'-Dihydroxy-3,3'-Dimethyl-5,5'-Dichlorodiphenyl Sulfide; Orbisan;
2,2'-Thiobis(4-Chloro-6-Methylphenol)

Chemical Formula:  Cn/H10Cl000S
                    14 12  22

Molecular Weight:   315.22


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD Q oral (rat)  1.3

    mg/kg (*NIOSH/RTECS  1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:  Not Found

    Specific Gravity  (H 0=1):   Not  Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:  Not Found

-------
                                           CAS Registry Number:  4418-66-0
                                           Page 2 of 3
             PHENOL,  2,2'-THIOBIS[4-CHLORO-6-METHYL-
SECTION III  -- FIRE AND EXPLOSION HAZARD DATA

    Flash Point (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Not Found

    Special Fire Fighting Procedures:  Not Found

    Unusual Fire  and Explosion Hazards:  When heated to decomposition it
    emits very toxic fumes of  sulfur oxides and chlorine containing compounds
    (Sax 1984, p.  1068).


SECTION IV  -- REACTIVITY DATA

    Stability:  Unstable:  Not  Found
                Stable:  Not Found

        Conditions to Avoid:   Not  Found

    Incompatibility (Materials  to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:   When heated to decomposition  it
    emits very toxic fumes of  sulfur oxides and chlorine containing compounds
    (Sax 1984, p.  1068).

    Hazardous Polymerization:   May Occur:   Not Found
                              May Not  Occur:  Not Found

        Conditions to Avoid:   Not  Found


SECTION V -- HEALTH HAZARD  DATA

    Routes  of Entry:   Inhalation:  Not Found
                      Skin:   Not  Found
                      Ingestion:   Yes (Sax 1984, p.  1068)

    Health Hazards  (Acute, Delayed,  and  Chronic):  This compound is highly
    toxic by  ingestion (Sax 1984,  p. 1068).

    Signs and Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Not Found

-------
                                         CAS Registry Number:  4418-66-0
                                         Page 3 of 3
             PHENOL, 2,2'-THIOBIS[4-CHLORO-6-METHYL-
SECTION VI --  USE INFORMATION

    Not Found
SECTION VII  -- PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be Taken  in Case Material is Released or Spilled)

    Not Found
COMMENTS

    The following  sources were searched but no information found:
       Hawley 1981
       Hayes 1982
       Merck Index 1983
       Clayton and Clayton 1981-82
       Buchel 1983

-------
                                     CAS Registry Number:  4835-11-4
                                     Page 1  of 3
                       EPA CHEMICAL  PROFILE
                                                  INTERIM
                                                  Date: October 31,  1985
                                                  Revision:
CHEMICAL  IDENTITY --  HEXAMETHYLENEDIAMINE, N,N'-DIBUTYL-

CAS Registry Number:  4835-11-4

Synonyms:   N,N'-Dibuty1-1,6-Hexanediamine;  1,6-Hexanediamine,
N,N'-Dibutyl-; 1,6-N,N'-DibutyIhexanediamine; N,N'-DibutyIhexamethylenediamine

Chemical  Formula:  C.,H00N.
                    14 32 2
Molecular Weight:  228.42


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  LC   inhalation
    (rat) 0.22 mg/liter/4 hours (*NIOSH/RTECS 1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:  Not Found

-------
                                      CAS Registry Number:   4835-11-4
                                      Page 2 of 3
               HEXAMETHYLENEDIAMINE, N,N'-DIBUTYL-
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  (Non-Specific  -- Alkylamine, n.o.s.
    (Corrosive))   This material may react violently with water.  Small fires:
    dry chemical,  carbon dioxide, water spray,  or  foam.  Large fires:  water
    spray, fog,  or foam.  Move container from  fire area  if you can do so
    without risk.   Spray cooling water on containers that are exposed to
    flames until  well after fire is out (DOT 1984, Guide 60).

    Special  Fire Fighting  Procedures:  (Non-Specific -- Alkylamine, n.o.s.
    (Corrosive))   Keep unnecessary people away;  isolate hazard area and deny
    entry.  Stay  upwind; keep out of low areas.  Wear self-contained (positive
    pressure if available) breathing apparatus  and full-protective clothing
    (DOT 1984,  Guide 60).

    Unusual Fire and Explosion Hazards:   (Non-Specific  -- Alkylamine,
    n.o.s. (Corrosive))  Flammable or poisonous  gases may accumulate in tanks
    or hopper  cars  (DOT 1984, Guide 60).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous  Decomposition or Byproducts:  Not  Found

    Hazardous  Polymerization:  May Occur:   Not Found
                               May  Not  Occur:  Not  Found

        Conditions to Avoid:  Not Found
SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Not Found
                      Skin:  Yes (Non-Specific -- Corrosive Alkali)
                             (Gosselin 1984,  p.  III-245)
                      Ingestion:   Yes (Non-Specific -- Corrosive Alkali)
                                  (Gosselin 1984,  p.  III-245)

-------
                                      CAS Registry Number:  4835-11-4
                                      Page 3 of 3
               HEXAMETHYLENEDIAMINE,  N,N'-DIBUTYL-
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Health Hazards (Acute, Delayed,  and Chronic):   (Non-Specific --
    Corrosive Alkali)  Acute circulatory shock; burns in mouth,  throat, and
    esophagus;  suffocation due to glottal or laryngeal swelling;  perforation
    and inflammation of  the esophagus and the tracheobronchial  tree;
    aspiration pneumonia.  Delayed stricture (scar)  formation causing problems
    with swallowing, and stomach filling and emptying; strong alkalis are
    markedly corrosive and penetrating to skin and mucous membranes  (Gosselin
    1984,  p.  III-245).

    Signs and Symptoms of Exposure:   This material  is a corrosive alkali
    (*Rumack 1975  to Present)  By ingestion, visible burns in mouth, drooling,
    gagging,  vomiting, chest and upper abdominal pain, difficulty in breathing
    or apnea (respiratory arrest), collapse and cardiac arrest  may occur
    (Gosselin 1984, p. III-245).

    Medical  Conditions Generally Aggravated by Exposure:  Not  Found

    Emergency and First Aid  Procedures:  For oral  ingestion,  dilute
    immediately with milk or water.  Avoid vomiting.  For inhalation exposure,
    establish respiration and administer oxygen.  For skin or eye exposure,
    irrigate copiously with water for at least 15 minutes (*Rumack  1975 to
    Present).
SECTION  VI  --  USE INFORMATION

    Not Found
SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or Spilled)

    (Non-Specific -- Alkylaraine, n.o.s. (Corrosive))   Do not  touch  spilled
    material;  stop  leak  if you can do so without risk.   Small spills:   absorb
    with sand or other noncombustible absorbent material and  place  into
    containers for  later disposal.  Small dry spills:   with clean shovel place
    material into clean, dry container and cover; move containers from  spill
    area.   Large spills:  dike far ahead of spill for later disposal.   Keep
    unnecessary people away; isolate hazard area and deny entry.  Stay  upwind;
    keep out of low areas.  Wear self-contained (positive pressure  if
    available) breathing apparatus and full protective clothing (DOT 1984,
    Guide  60).

-------
                                     CAS Registry Number:  5281-13-0
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  PIPROTAL

CAS Registry  Number:  5281-13-0

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume  1, p. 595)
1,3-Benzodioxole, 6-(bis(2-(2-Butoxyethoxy)Ethoxy)Methyl)-;  Heliotropin
Acetal;  Piperonal Bis(2-(2-Butoxyethoxy)ethyl)acetal; Tropital

Chemical Formula:   C0,H.,.CL
                    24 40  8
Molecular Weight:  456.64


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  I&cn oral  (rat) 4.4
    mg/kg (*NIOSH/RTECS 1985)  (SUSPECT)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H2
-------
                                     CAS Registry Number:  5281-13-0
                                     Page 2 of 3
                             PIPROTAL


SECTION  III  -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Not Found

    Special Fire Fighting Procedures:  Not Found

    Unusual Fire  and Explosion Hazards:  Not Found


SECTION  IV  -- REACTIVITY DATA

    Stability:  Unstable:  Not  Found
                Stable: Not Found

        Conditions to Avoid:   Not Found

    Incompatibility (Materials  to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:   Not Found

    Hazardous Polymerization:   May Occur:  Not Found
                              May Not  Occur:  Not Found

        Conditions to Avoid:   Not Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Not Found
                      Skin:   Not Found
                      I ngestion:   Not Found

    Health Hazards  (Acute, Delayed,  and  Chronic):  Not Found

    Signs  and Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Not Found

-------
                                     CAS Registry Number:  5281-13-0
                                     Page 3 of 3
                             PIPROTAL
SECTION VI -- USE INFORMATION

    Insecticide, structurally  related to piperonyl butoxide (Hayes  1982,
    p.  113).  Synergist for pyrethroids (Buchel  1983, p. 21).   Product
    discontinued (Farm Chemicals Handbook 1984,  p. C-236).
SECTION VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps  to be Taken in Case Material is Released or Spilled)

    Not Found
COMMENT

    Sources searched but no  information was  found:
        Clayton and Clayton  1981-82
        Merck 1983
        Sax 1984
        Verschueren 1983
        Weast 1979
        DOT 1984

-------
                                           CAS  Registry Number:  5344-82-1
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- THIOUREA,  (2-CHLOROPHENYL)-

CAS Registry  Number:  5344-82-1

Synonyms:  Urea,  l-(o-Chlorophenyl)-2-Thio-; 2-Chlorophenylthiourea;
(o-Chlorophenyl)thiourea;  l-(2-Chlorophenyl)thiourea;  l-(o-Chlorophenyl)-
thiourea;  N-(2-Chlorophenyl)thiourea; l-(2 Chlorophenyl)-2-Thiourea

Chemical Formula:   C?H  C1N.S

Molecular Weight:  186.67


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found
            !

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD   oral (rat) 4.6

    mg/kg (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not  Found

    Specific Gravity (H  0=1):  Not Found

    Vapor Pressure (mmHg):   Not  Found

    Melting Point:   294.8°-295.7°F, 146-146.5°C  (*Weast 1979)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not Found

    Solubility  in Water:   Not Found
       •

    Appearance and Odor:  Needles or plates (*Weast  1979)

-------
                                           CAS Registry Number:  5344-82-1
                                           Page 2 of 3
                   THIOUREA, (2-CHLOROPHENYL)-


SECTION  III  --  FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing  Methods:  Not Found

    Special Fire  Fighting  Procedures:  Not Found

    Unusual Fire and Explosion Hazards:   Not Found


SECTION  IV  -- REACTIVITY DATA

    Stability:  Unstable:  Not  Found
                Stable:  Not Found

        Conditions to Avoid:  Not  Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated to decomposition it
    emits  very toxic fumes of  chlorides, nitrogen oxides, and sulfur oxides
    (Sax 1984, p.  764).

    Hazardous Polymerization:   May Occur:   Not Found
                              May Not Occur:  Not Found

        Conditions to Avoid:  Not  Found


SECTION  V -- HEALTH HAZARD  DATA

    Routes of Entry:   Inhalation:  Not Found
                      Skin:  Not  Found
                       Ingestion:  Yes  (Sax 1984,  p.  764)

    Health Hazards (Acute,  Delayed,  and Chronic): ' High oral toxicity (Sax
    1984,  p.  764).

-------
                                           CAS Registry Number:  5344-82-1
                                           Page 3 of 3


                   THIOUREA, (2-CHLOROPHENYL)-


SECTION  V --  HEALTH HAZARD DATA  (Continued)

    Signs and Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency  and First Aid Procedures:   (Non-Specific -- Thiourea)  Move
    victim to fresh air; call emergency  medical  care.  Remove and isolate
    contaminated  clothing and shoes at the site.  In case of contact with
    material, immediately flush skin or  eyes with running water for at least
    15 minutes  (DOT 1984, Guide 53).


SECTION  VI -- USE INFORMATION

    This  material  is an herbicide  (Iramer, C.R., Biochem. Physiol. Pflanz
    117(6)515 (1982)).  Not registered as  a pesticide in the U.S.
    (USEPA/Active  Ingredients 1985).


SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released  or  Spilled)

    (Non-Specific  -- Thiourea)   Do not touch spilled material; stop leak if
    you can do  it  without risk.  Small spills:   take up with sand or other
    noncombustible absorbent material and  place  into containers for later
    disposal.   Small dry spills:  with clean shovel place material into clean,
    dry container  and cover; move  containers from spill area.  Large spills:
    dike  far ahead of spill for later disposal  (DOT  1984, Guide 53).

-------
                                      CAS  Registry Number:  5836-29-3
                                      Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- COUMATETRALYL

CAS Registry Number:   5836-29-3

Synonyms:  2H-1-Benzopyran-2-one, 4-Hydroxy-3-(1,2,3,4-Tetrahydro-1-
Naphthalenyl)-;  3-(alpha-Tetral)-4-Oxycoumarin; 3-(alpha-Tetralyl)-4-
Hydroxycoumarin;  3-(D-Tetralyl)-4-Hydroxycoumarin; 4-Hydroxy-3-(l,2,3,4-
Tetrahydro-l-Naphthalenyl)-2H-l-Benzopyran-2-one; 4-Hydroxy-3*(l,2,3,4-
Tetrahydro-l-Naphthyl)-Cumarin; 4-Hydroxy-3-(1,2,3,4-Tetrahydro-1-
Naphthyl)Coumarin; Bayer 25 634; Coumarin, 4-Hydroxy-3-(l,2,3,4-Tetrahydro-l-
Naphthyl)-;  Endox; Endrocid; Endrocide;  Racumin; Racumin 57; Raucumin  57;
Rodentin

Chemical Formula:  C  H ,0

Molecular Weight:  292.35


SECTION  I  -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:  Not Found

    IDLH:   Not Found

    Other Limits  Recommended:   Toxicity information:   LD   oral (rat)
    16.5 mg/kg  ("NIOSH/RTECS 1985)


SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:  Not  Found

    Specific Gravity (H  0=1):   Not Found

    Vapor Pressure  (mmHg):  Not Found

    Melting  Point:  349°F,  176°C (-^Worthing 1979)

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):   Not Found

-------
                                            CAS Registry Number:  5836-29-3
                                            Page 2 of 3
                            COUMATETRALYL


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility  in Water:  Practically insoluble  (^Worthing 1979)

    Appearance and Odor:  Yellowish-white  crystalline powder; colorless
    when pure; odorless (^Worthing 1979)


SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not  Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing  Methods:   (Non-Specific -- Coumarin Derivative Pesticide,
    Solid,  n.o.s.)   Small fires:  dry chemical, carbon dioxide, water spray or
    foam.   Large fires:  water spray,  fog or foam (DOT 1984, Guide 55).

    Special  Fire  Fighting  Procedures:   (Non-Specific -- Coumarin Derivative
    Pesticide, Solid, n.o.s.)   Stay  upwind;  keep out of low areas.  Wear
    positive pressure breathing apparatus and special protective clothing.
    Fight  fire from  maximum distance.   Dike  fire control water for later
    disposal; do not scatter the material (DOT  1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific  --  Coumarin
    Derivative Pesticide, Solid, n.o.s.)  This  material may burn but does not
    ignite  readily.  Fire and runoff from fire  control water may produce
    irritating or poisonous gases.   Runoff from fire control water may give
    off poisonous gases.  Container  may explode in heat of fire (DOT 1984,
    Guide  55).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials  to Avoid):  Enolic form of compound has
    acidic  properties and can form salts with metals (*Spencer 1982).

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:  May  Occur:   Not Found
                               May Not Occur: Not Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  5836-29-3
                                            Page 3 of 3
                            COUMATETRALYL
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (Non-Specific -- Coumarin Derivative
                                  Pesticide, Solid, n.o.s.) (DOT 1984,
                                  Guide 55)
                       Skin:   Yes  (*Encyc Occupat Health and Safety 1971)
                       Ingestion:  Yes (Physicians'  Desk Reference 1980,
                                  p. 1031)

    Health Hazards  (Acute, Delayed,  and Chronic):   Overdosage with
    anticoagulants  may cause  acute bleeding  (Physicians' Desk Reference  1980,
    p.  1031).

    Signs and Symptoms of Exposure:   Coumarin  derivatives present no danger
    to man under ordinary  conditions of use, but can produce hemorrhage  if
    absorbed in  large or repeated quantities (*Encyc Occupat Health and  Safety
    1971).

    Medical  Conditions  Generally Aggravated by  Exposure:   Pre-existing
    blood clotting  disease or liver disease  (^Morgan 1976).

    Emergency and  First Aid Procedures:  Ingestion:  induce vomiting with
    syrup of ipecac if victim ingested anticoagulant rodenticide within  the
    preceding 2-3 hours (Morgan  1976).  (Non-Specific -- Coumarin Derivative
    Pesticide, Solid, n.o.s.)  Move victim to fresh air; call emergency
    medical care.  If not  breathing, give artificial respiration.  If
    breathing is difficult, give oxygen.  In case of contact with material,
    immediately  flush skin or eyes with running water for at least 15
    minutes.   Speed in removing material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes at the site.   Keep
    victim quiet and maintain normal body temperature.  Effects  may be
    delayed;  keep victim under observation (DOT  1984, Guide 55).


SECTION  VI  --  USE INFORMATION

    Courmatetralyl  is used as a  rodenticide  (*Encyc Occupat Health and Safety
    1971), functioning as  an  anticoagulant that does not induce  bait-shyness
    ('^Worthing 1979).


SECTION  VII  -- PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to be Taken  in Case Material is Released or Spilled)
   \
    (Non-Specific -- Coumarin Derivative Pesticide, Solid,  n.o.s.)  Stay
    upwind; keep out of low areas.  Ventilate closed spaces before entering
    them.   Wear  positive pressure breathing  apparatus and special protective
    clothing.  Remove and  isolate contaminated clothing at the site.  Do not
    touch spilled material..  Use water spray to  reduce vapors.   With clean
    shovel place material  into clean, dry container and cover.   Dike far ahead
    of large spills for later disposal (DOT  1984, Guide 55).

-------
                                     CAS Registry  Number:  ftStt-ft-l
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,
                                                   Revision:
CHEMICAL IDENTITY -- THALLOUS CARBONATE

CAS Registry  Number:  6533-73-9

Synonyms:  Thallium(I) Carbonate(2:1); Dithallium Carbonate; Ctrl
Dithallium (1+) Salt; Thallium Carbonate;  Thallium  Carbonate (flJ

Chemical Formula:   CO  »2T1

Molecular  Weight:  468.78


SECTION  I --HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION!

    OSHA PEL:  Air:  TWA 0.1 mg (Tl)/m3  (skin)  (-NIOSH/RTECS 1985)

    ACGIH TLV:  Air:  TWA 0.1  mg  (Tl)/m3 (skin) (*ACGIH  1980)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity  information:  LD    oral  (r«t) 23

    mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H20=l):  7.1 (-"Merck 1976)

    Vapor Pressure (mmHg):   Not Found

    Melting Point:   522°F, 272°C (*Merck 1976)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl acetate=l):   Not Found

    Solubility  in Water:  Soluble in 24 parts  water, 3.7 parts boili^l
    water  (*Merck 1976)

    Appearance and Odor:  Heavy, shiny,  colorless or white cryittli
    (*Hawley 1977)

-------
                                      CAS Registry Number:  6533-73-9
                                      Page 2 of 3
                       THALLOUS  CARBONATE
SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing Methods:  (Non-Specific  -- Thallium Salts, n.o.s.)
    Extinguish with dry chemicals, carbon dioxide, water spray, fog, or foam
    (DOT 1984, Guide 53).

    Special  Fire Fighting  Procedures:   (Non-Specific  -- Thallium Salts,
    n.o.s.)   Move container from fire  area if you can do so without risk.
    Wear self-contained (positive pressure if available) breathing apparatus
    and full protective clothing (DOT  1984,  Guide 53).

    Unusual  Fire and Explosion Hazards:  When heated to  decomposition, it
    emits  toxic  fumes of thallium (Sax 1984, p.  2556).  (Non-Specific --
    Thallium Salts, n.o.s.)  Fire may  produce irritating or poisonous gases
    (DOT 1984, Guide 53).
SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not  Found

    Hazardous Decomposition or Byproducts:   When heated to decomposition,
    it emits  toxic fumes of thallium (Sax 1984,  p. 2556).

    Hazardous Polymerization:   May Occur:  Not Found
                               May  Not  Occur:   Not Found

        Conditions to Avoid:  Not Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:   Yes (*Rumack  1975  to Present)
                      Skin:  Yes  (*Gosselin 1976)
                       Ingestion:   Yes (Sax  1984, p.  2556)

-------
                                      CAS Registry Number:  6533-73-9
                                      Page 3 of 3
                        THALLOUS CARBONATE
SECTION  V -- HEALTH HAZARD DATA  (Continued)

    Health Hazards  (Acute, Delayed, and Chronic):   Thallium is  a  digestive
    tract  irritant and nervous  system toxicant  (Doull 1980, p. 457).   It is
    classified as extremely toxic.   Probable oral lethal dose (humans) is 5-50
    mg/kg, or between 7 drops and  1  teaspoon for 70 kg person (150 Ib.)
    (*Gosselin 1976).   Teratogenic effects are noted after chronic
    intoxication (*Venugopal  1978).

    Signs and Symptoms of Exposure:   Symptoms appear within 12-24 hours
    after  a single toxic dose or after several weeks of small daily doses.   In
    acute  poisoning dominant  symptoms include severe stomach cramps,  vomiting
    and diarrhea.  In severe  cases nervous system damage may be indicated by
    tremors, delirium,  convulsions,  paralysis,  and coma culminating in death.
    Symptoms of  subacute poisonings  include stomach cramps, nausea, vomiting,
    diarrhea,  leg pains, tremors,  and tingling  sensations in the hands and
    feet.   Damage to nervous  system  may  be permanent ("Gosselin 1976).

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  (Non-Specific -- Thallium Salts,
    n.o.s.)  Move victim to fresh  air; call emergency medical care.  Remove
    and isolate  contamiated clothing and shoes  at the site.  In case of
    contact with material, immediately flush skin or eyes with running water
    for at least 15 minutes (DOT 1984, Guide 53).


SECTION  VI --  USE INFORMATION

    Used in the  manufacture of  imitation diamonds (*Merck 1976).  Also used  in
    analysis to  test for carbon disulfide (*Hawley 1977).  Used as a fungicide
    (*Venugopal  1978).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken in Case Material  is Released or Spilled)

    Ventilate area of spill.  For  small  quantities, sweep onto paper or other
    suitable material,  place  in sealed container for disposal.  Large
    quantities may be reclaimed.   If this is not practical, collect in most
    convenient and safe manner  and deposit in sealed containers.  For liquids
    absorb in vermiculite, dry  sand, earth or similar material and place in
    sealed containers for disposal  (*NIOSH/OSHA  1981).  (Thallium Compound,
    n.o.s.)  Wear self-contained (positive pressure if available)  breathing
    apparatus and full protective  clothing (DOT  1984, Guide 53).

-------
                                            CAS Registry Number:  6923-22-4
                                            Page 1 of 4
                        EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date:  October 31,  1985
                                                    Revision:
CHEMICAL IDENTITY --  MONOCROTOPHOS

CAS Registry Number:  6923-22-4

Synonyms:  (E)-Dimethyl l-Methyl-3-(Methylamino)-3-Oxo-l-Propenyl Phosphate;
(E)-Phosphoric Acid Dimethyl Ester, Ester with 3-Hydroxy-N-Methylcrotonamide;
3-(Dimethoxyphosphinyloxy)-N-Methyl-cis-Crotonamide; 3-(Dimethoxyphosphinyloxy)
-N-Methylisocrotonamide;  S-(Dimethoxyphosphinyloxy) N-Methyl-cis-Crotonamide;
3-Hydroxy-N-Methyl-cis-Crotonamide Dimethyl Phosphate; 3-Hydroxy-N-
Methylcrotonamide Dimethyl  Phosphate; Azodrin; Azodrin Insecticide;  Bilobran;
C 1414; Ciba 1414;  cis-l-Methyl-2-Methyl Carbamoyl Vinyl Phosphate;  Crisodrin;
Crotonamide,  3-Hydroxy-N-Methyl-, Dimethylphosphate, (E)-;  Dimethyl  l-Methyl-2-
(Methylcarbamoyl)Vinyl Phosphate, cis-; Dimethyl 2-Methylcarbamoyl-l-
Methylvinyl Phosphate; Dimethyl Phosphate Ester of 3-Hydroxy-N-Methyl-cis-
Crotonamide;  Dimethyl Phosphate of 3-Hydroxy-N-Methyl-cis-Crotonamide;
ENT 27,129; Monocron; N-Desmethyl Bidrin; N-Methyl Bidrin;  Nuvacron; Nuvacron
20; Phosphoric acid,  Dimethyl  l-Methyl-3-(Methylamino)-3-Oxo-l-Propenyl  Ester,
(E)-; Phosphoric  Acid, Dimethyl Ester, Ester with (E)-3-Hydroxy-N-
Methylcrotonamide;  Phosphoric  acid, Dimethyl Ester, Ester with 3-Hydroxy-N-
Methylcrotonamide,  (E)-;  Phosphoric Acid, Dimethyl Ester, Ester with cis-3-
Hydroxy-N-Methylcrotonamide; Pillardrin; Plantdrin; SD 9129; Shell SD  9129;
Susvin

Chemical Formula:  C-.H,.NOCP
                     7  14  5

Molecular  Weight:  223.16


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA  PEL:  Not  Found

    ACGIH TLV:   TWA 0.25  mg/m3  O'-ACGIH 1983)

    IDLH:  Not Found

    Other  Limits  Recommended:  Toxicity information:   LC    inhalation

    (rat)  0.063 mg/liter/4  hours  (*NIOSH/RTECS 1985)

-------
                                      CAS Registry Number:   6923-22-4
                                      Page 2 of 4
                          MONOCROTOPHOS


SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:   257°F,  125°C  at  0.0005 mmHg (Worthing 1983)

    Specific Gravity (H 0=1):   Not Found

    Vapor Pressure  (mmHg):  7 x  10"6 at 20°C  (*Merck 1983)

    Melting Point:   129-131°F,  54-55°C (crystals)  (*Merck 1983); 77-86°F,
    25-30°C  (commercial product)  (Merck 1983,  p.  894)

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:  Miscible (*Merck 1983)

    Appearance and  Odor:  Colorless crystals with a mild ester odor
    (^Hartley 1983;  "Spencer 1982);  commercial product is a  reddish-brown
    solid  (Merck 1983, p.  894)


SECTION  III  -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Above  200°F  (CC)  (Farm Chemicals Handbook
    1984,  p.  C156)
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing  Methods:  Like other organophosphorus pesticides ('"Morgan
    1982)  extinguish with  dry chemical, carbon dioxide, water  spray, fog, or
    foam (DOT 1984, Guide  55).

    Special Fire Fighting  Procedures:   Like  other organophosphorus
    pesticides (^Morgan 1982) move container from fire area  if you can do so
    without  risk.  Fight fire from maximum distance.   Dike fire control water
    for later disposal; do not scatter the material (DOT 1984,  Guide 55).

    Unusual  Fire and Explosion Hazards:  Wear positive pressure  breathing
    apparatus and  full protective clothing (*Farm Chemicals  Handbook 1984).
    Container may  explode  in heat of fire (DOT 1984,  Guide 55).

-------
                                      CAS Registry Number:  6923-22-4
                                      Page 3 of 4
                           MONOCROTOPHOS
SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Yes.   Unstable  in  aqueous solution above pH 7.0;
    in low molecular weight  alcohols  and  glycols (^Worthing 1979).
                 Stable:   Yes.   Stable in ketones and higher molecular
    weight alcohols and glycols  (^Worthing 1979).

        Conditions to Avoid:  Stable  when stored in glass or polyethylene
        containers.  Relatively  stable in sunlight (Farm Chemicals  Handbook
        1984,  p.  C156).   Keep  away  from temperatures above 80°F; do not store
        below 70°F.  Corrosive to black iron, drum steel, stainless steel 304
        and brass, but  not to  glass,  aluminum, or stainless steel 316
        (^Worthing 1979).

    Incompatibility (Materials  to Avoid):  Incompatible with alkaline
    compounds  (^Worthing 1979).

    Hazardous Decomposition or  Byproducts:  Toxic fumes evolved when  heated
    to decomposition (-Sax 1979).

    Hazardous Polymerization:   May Occur:   Not Found
                                May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (-Farm Chemicals Handbook 1984)
                       Skin:   Yes  (Hayes  1982, p. 360)
                       Ingestion:  Yes  (Hayes 1982,  p. 360)

    Health Hazards  (Acute, Delayed,  and Chronic):   Monocrotophos  is  an
    organophosphorus pesticide.  It  is  a  cholinesterase inhibitor and acts  on
    the nervous system (Hayes  1982,  p.  360).  Extremely toxic; probable oral
    lethal dose to humans  5-50 mg/kg or between 7 drops and 1 teaspoon for  a
    70 kg (150 Ib.)  person (*Gosselin  1984).  Repeated inhalation or skin
    contact with this material may,  without symptoms, progressively increase
    susceptibility to poisoning  ("Farm  Chemicals Handbook 1984).

    Signs and  Symptoms of Exposure:   Symptoms  are similar to parathion
    poisoning:   nausea, vomiting,  abdominal cramps,  diarrhea,  excessive
    salivation, headache,  giddiness, vertigo and weakness.  Rhinorrhea and
    sensation of tightness in  chest  are common after  inhalation exposure.
    Random jerky movements,  incontinence, convulsions and coma may also be
    observed.   Death occurs  primarily due to respiratory arrest ("Gosselin
    1984).

-------
                                      CAS Registry Number:  6923-22-4
                                      Page 4 of 4
                           MONOCROTOPHOS


SECTION  V -- HEALTH HAZARD DATA (Continued)

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid Procedures:  As with other organophosphorus
    pesticides (^Morgan 1982), move victim to fresh air; call emergency
    medical care.   If not  breathing, give artificial respiration.   If
    breathing is  difficult,  give oxygen.  In case of contact with  material,
    immediately flush skin or eyes with running water for at least 15
    minutes.  Speed in  removing material from skin is of extreme importance.
    Remove and isolate  contaminated clothing and shoes at the site.   Keep
    victim quiet  and maintain normal body temperature.  Effects may be
    delayed; keep victim under observation (DOT 1984, Guide 55).

SECTION  VI -- USE INFORMATION

    Monocrotophos is a  fast  acting insecticide with both systemic  and contact
    action used against a  wide range of pests on cotton, sugar cane,  tobacco,
    potatoes,  peanuts,  tomatoes, and ornamentals ("Worthing 1979;  *Farm
    Chemicals  Handbook  1984) .
SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to  be Taken in  Case Material is Released or Spilled)

    Wear clean rubber  gloves, waterproof clothing, and goggles when dealing
    with product.   Replace gloves frequently and destroy used gloves ("Farm
    Chemicals Handbook 1984).  As with other organophosphorus pesticides
    (^-Morgan 1982),  do not touch spilled material; stop leak if you can do it
    without risk.   Use water spray to reduce vapors.  Small  spills:   take up
    with sand or  other noncombustible absorbent material and place into
    containers for later disposal.  Small dry spills:  with  clean shovel place
    material into clean, dry container and cover; move containers from spill
    area.   Large  spills:  dike far ahead of spill for later  disposal.   Keep
    unnecessary people away; isolate hazard area and deny entry.   Stay upwind;
    keep out of low areas.  Ventilate closed spaces before entering them.
    Wear positive pressure breathing apparatus and special protective
    clothing.   Remove  and isolate contaminated clothing at the site (DOT 1984,
    Guide  55).

-------
                                           CAS Registry Number:   7440-02-0
                                           Page 1 of 3
                       EPA  CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- NICKEL

CAS Registry Number:  7440-02-0

Synonyms:  CI77775; Ni; Ni 0901-S; Ni0901-S  (Harshaw); Ni 270; Ni 4303T;
Ni-4303T;  Nickel 270; Nickel Catalyst, Wet  (DOT); Nickel Sponge; NP 2; NP-2;
Pulverized Nickel; Raney Alloy;  Raney Nickel; RCH 55/5; Carbonyl Nickel Powder

Chemical Formula:   Ni

Molecular  Weight:  58.70


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Air:  TWA 1 mg/m3  (*NIOSH  1985)

    ACGIH TLV:   TWA  1 mg/m3 (*ACGIH 1983)

    IDLH:  Not Found

    Other Limits Recommended:   NIOSH Criteria Document:   Occupational
    exposure  to inorganic nickel recommended standard-air:   15  ug/m3 TWA
    (*NIOSH 1985).  Toxicity information:   LD.   oral (guinea pig) 5 mg/kg

    (*NIOSH/RTECS  1985).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   5139°F,  2837°C  (*Merck 1983)

    Specific Gravity (H20=l):  8.90  (*Sax 1979)

    Vapor Pressure (ramHg):  1 at 1810°C  (*Sax 1979)

    Melting Point:   2831°F,  1555°C  (*Merck 1983)

    Vapor Density (AIR=1):   Not Found

    Evaporation Rate  (Butyl acetate=l):   Not  Found

    Solubility in Water:  Insoluble  (*Weast  1979)

    Appearance and Odor:   Silvery metal  (*Weast 1979); lustrous  white metal
    (*Merck 1983)

-------
                                            CAS Registry Number:  7440-02-0
                                            Page 2 of 3
                                NICKEL
SECTION  III -- FIRE AND  EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Flood with water, dry chemical, graphite or dry
    earth  (Student  1981,  p.  363).

    Special  Fire Fighting Procedures:  Keep unnecessary people away;
    isolate hazard  area  and deny  entry.  Stay upwind; keep out of low areas.
    Wear self-contained  (positive pressure if available) breathing apparatus
    and full protective  clothing.  Move container from fire area if you can do
    it without risk.  Cool  containers that are  exposed to flames with water
    from the side until  well after fire is out.  For massive fire in cargo
    area,  use unmanned hose holder or monitor nozzles; if this is impossible,
    withdraw from area and  let  fire burn (DOT 1984, Guide 53).

    Unusual  Fire and Explosion Hazards:   May ignite  spontaneously  in air
    (*Hawley 1977).  Reacts violently with fluorine, ammonia nitrate,
    hydrazine, ammonia,  hydrogen  and dioxane, performic acid, phosphorus,
    selenium, sulfur, titanium  and potassium perchlorate (Sax 1984, p. 1990).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:
                 Stable:  Yes (*Merck 1983)

        Conditions to Avoid: Finely divided  nickel  (e.g. Raney nickel
        catalysts) may become hot enough to ignite if exposed to air or
        moisture (Student 1981, p. 363).

    Incompatibility  (Materials to  Avoid):  Materials containing potassium
    perchlorate with nickel and titanium powders and infusional earth give
    severe explosions during a  friction test.   Dioxane reacts explosively with
    hydrogen and Raney nickel above 210°C  (*NFPA 1978).  Also, aluminum;
    aluminum trichloride; ethylene; hydrogen; methanol; non-metals; oxidants;
    sulfur compounds  (Sax 1984, p. 1990) and  selenium metal (.Weiss 1980, p.
    1105)  are incompatible  with nickel.

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not  Found

        Conditions to Avoid: Not Found

-------
                                            CAS Registry Number:  7440-02-0
                                            Page 3 of 3
                               NICKEL
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (*Rumack 1975 to Present)
                       Skin:   Yes  (*Grant  1974)
                       Ingestion:  Yes (*Berg 1972)

    Health Hazards  (Acute, Delayed,  and  Chronic):   Numerous  cases of
    dermatitis have  been reported  (-Clayton and Clayton 1981-82).
    Epidemiological  studies conclusively demonstrate an excess risk  of cancer
    of the nasal cavity and lungs  in workers in nickel refineries.   It is
    likely that nickel, in some  forms, is carcinogenic to man (*IARC 1972-85).

    Signs and  Symptoms  of Exposure:  Symptoms include nausea, vomiting,
    diarrhea,  central  nervous  system depression (Weiss 1980,  p.  1105),
    coughing,  shortness of breath, chest pain, fever and weakness  upon
    inhalation (*Rumack 1975 to  Present).

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air; call
    emergency medical  care.  In  case of contact with material immediately
    flush skin or eyes  with running water for at least 15 minutes.   Remove and
    isolate contaminated clothing  and shoes at the site (DOT 1984, Guide 32).


SECTION  VI  -- USE INFORMATION

    Nickel is  used in  nickel-plating; for various alloys such as new silver,
    Chinese silver,  German silver; for coins, electrotypes,  lighting-rod tips,
    electrical contacts and electrodes, spark plugs, machinery parts;  catalyst
    for hydrogenation  of organic substances; in manufacturing of Monel metal,
    stainless  steels,  and nickel-chrome resistance wire; in alloys for
    electronic and space applications (*Merck 1983).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING  AND  USE
(Steps to be  Taken in  Case Material is Released or Spilled)

    Avoid inhalation and skin  contact (see Section V above).   In case nickel
    is spilled:  1)  Ventilate  area of spill; 2) Collect spilled material in
    the most  convenient and safe manner for reclammation or for disposal in
    secure sanitary  landfill.  Liquid containing nickel should be  absorbed in
    vermiculite,  dry sand, earth or a similar material (*NIOSH/OSHA  1981).

-------
                                     CAS Registry Number:  7440-48-4
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31, 1985
                                                  Revision:
CHEMICAL IDENTITY -- COBALT

CAS Registry Number:  7440-48-4

Synonyms:  CI  77320; Cobalt 59; NCI-C60311

Chemical Formula:   Co

Molecular  Weight:  58.93


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  TWA 0.1 mg/m3  (NIOSH/OSHA 1978, p. 70)

    ACGIH TLV:  TWA 0.1 mg/m3 (ACGIH 1985, p. 14)

    IDLH:  20 mg/m3 (NIOSH/OSHA 1978,  p.  70)

    Other Limits Recommended:  Not Found


SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   5612°F, 3100°C  (*Merck 1976)

    Specific Gravity (H20=l):  8.9  (Hawley 1981, pp.  258-259)

    Vapor Pressure (mmHg):   0  (NIOSH/OSHA 1978, p. 70)

    Melting Point:   2719°F,  1493°C  (*Merck 1976)

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility in Water:   Insoluble in cold or  hot  water  (>lfWeast 1979)

    Appearance and Odor:  Steel-gray, shining, hard, ductile (Hawley  1981,
    pp.  258-259).  Odor not  found.

-------
                                            CAS Registry Number:  7440-48-4
                                            Page 2 of 3
                             COBALT
SECTION  III  --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):   Not  Found
    Flammable Limits:  Noncombustible except  as  a powder (Hawley 1981,  pp.
    258-259)
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing Methods:   Not Found

    Special Fire Fighting  Procedures:   Not Found

    Unusual Fire and Explosion Hazards:  Fused ammonium nitrate with
    powdered  cobalt often produces a violent  and sometimes explosive reaction
    (*NFPA 1978).


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:
                 Stable:  Yes (*Merck  1976)

        Conditions to Avoid:  Processes which produce heat with dust or
        powder form (*Encyc Occupat Health and Safety 1971).

    Incompatibility (Materials to Avoid):  Acetylene; hydrazinium nitrate;
    oxidants  (Sax 1984, pp.  799-800).

    Hazardous Decomposition or Byproducts:   Not Found

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:   Not  Found

        Conditions to Avoid:  Not Found
SECTION V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes  (NIOSH/OSHA 1978, p. 71)
                      Skin:  Yes (NIOSH/OSHA 1978, p.  71)
                      Ingestion:   Yes  (Doull  1980, pp. 442-443)

-------
                                            CAS Registry Number:   7440-48-4
                                            Page 3 of 3
                             COBALT
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Health Hazards (Acute, Delayed,  and Chronic):  Cobalt is considered a
    slightly toxic  agent which causes readily reversible changes  at the end of
    exposure (*Sax  1975).  Respiratory effects have been observed.  Skin and
    eye lesions  similar to contact dermatitis have been reported.  High
    chronic ingestion causes goiter, an increase in red blood cell count, and
    enlarged heart  (Doull  1980, p. 442-443).  Exposure to cobalt  powder caused
    respiratory  disease, gastric disturbances, and blood in  the urine
    (*Friberg 1979; * Browning 1969).

    Signs and Symptoms of Exposure:   Symptoms include cough,  wheezing,
    shortness of breath  (*Friberg 1979), vomiting, diarrhea, a sensation of
    warmth (Doull 1980, p. 442-443), measle-like red spots on the skin
    (^Browning 1969) and allergic dermatitis (*ACGIH 1980).

    Medical Conditions Generally Aggravated by Exposure:   Those with skin
    diseases are at a greater risk (*Encyc Occupat Health and Safety 1971).

    Emergency and First Aid  Procedures:  Treat as for general poisoning.
    Establish respiration  and create artificial airway, if necessary.  Flush
    skin or eyes with running water.  Wash skin with soap and water (*Rumack
    1975 to Present).
SECTION  VI  --  USE  INFORMATION

    Manufacture  of  cobalt salt; nuclear technology; alloys  (Merck  1983, p.
    345);  manufacture of permanent magnets (*Encyc Occupat  Health  and Safety
    1971); cutting  materials; wear-resistant materials;  lacquers;  varnishes;
    paint  driers; production of inks, enamels, frits,  glazes,  glass
    decolorizer,  and  catalyst ("SRI).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be  Taken  in Case Material is Released or Spilled)

    Wear self-contained breathing apparatus and full protective clothing
    (*Encyc Occupat Health and Safety 1971).

-------
                                     CAS Registry Number:   7446-09-5
                                     Page  1 of 3
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- SULFUR DIOXIDE

CAS Registry Number:  7446-09-5

Synonyms:  Sulfur  Oxide; Sulfurous Acid Anhydride; Sulfurous Anhydride;
Sulfurous  Oxide; Sulphur Dioxide

Chemical Formula:   S0?

Molecular  Weight:  64.07


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Air:  TWA 5 ppm (13 mg/m3) (NIOSH/OSHA 1978, p. 168)

    ACGIH TLV:  TWA 2 ppm  (5 mg/m3);  STEL 5 ppm  (10 mg/m3) (ACGIH  1985,
    p.  30)

    IDLH:  100 ppm (*NIOSH/OSHA 1981)

    Other Limits Recommended:  NIOSH recommended  PEL  Air:  TWA 0.5 ppm
    0-NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   14°F,  -10°C  (*Merck  1976)

    Specific Gravity (H  0=1):  Liquid:   1.434  (*Weast 1979)

    Vapor Pressure (mmHg):   2432 at 68°F (*Hawley  1977)

    Melting Point:   -98.9°F,  -72.7°C (*Weast  1979)

    Vapor Density (AIR=1):   2.26 (''-General Electric Co. 1979, MSDS #50)

    Evaporation Rate  (Butyl  acetate=l):   Not Found

    Solubility in Water:   17.7% at 0°C; 11.9% at 15°C; 8.5% at 25°C; 6.4%
    at  35°C  ('-Merck 1976)

    Appearance and Odor:  Colorless liquid or gas with a strong suffocating
    odor (*Merck 1976).

-------
                                       CAS  Registry Number:   7446-09-5
                                       Page 2 of 3
                           SULFUR DIOXIDE
SECTION  III -- FIRE  AND EXPLOSION  HAZARD DATA

    Flash  Point (Method  Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Not  flammable (Weiss 1980, p. 841).  Extinguish
    fires  with dry chemical, carbon dioxide, water spray, fog or foam ("DOT
    1984).

    Special  Fire Fighting Procedures:   Wear self-contained breathing
    apparatus and full protective clothing.  Move container from fire area.
    Stay away from ends  of tanks.  Cool containers that are exposed to flames
    with water from  the  side until well after the fire is out.  Isolate area
    until  gas has dispersed.   Keep unnecessary  people away ("DOT 1984).

    Unusual  Fire and  Explosion Hazards:  This  material may burn, but will
    not ignite readily.   Containers may explode in heat of fire (*DOT 1984),
    or they may rupture  and release irritating  toxic sulfur dioxide (*CHRIS
    1978).  Sulfur dioxide has explosive properties when  it comes in contact
    with sodium hydride; potassium chlorate at  elevated temperatures; ethanol;
    ether; zinc ethylsulfurinate  at very cool temperatures (-15°C);  fluorine;
    chlorine trifluoride and chlorates  (*Bretherick 1979; *NFPA 1978).  It
    will react with  water or steam to produce toxic and corrosive fumes (*Sax
    1975).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes  (*NFPA 1978)

        Conditions to Avoid:   Avoid placing  in  pressurized container and
        exposing to light  (*Bretherick  1979).

    Incompatibility (Materials  to  Avoid):  Ammonia  ("General Electric Co.
    1979,  MSDS #50); monocesium or  monopotassium acetylide; dicesium monoxide;
    iron (II)  oxide; tin oxide; lead  (IV) oxide; chromium; manganese; molten
    sodium (*Bretherick 1979); powder aluminum  and rubidium (*NFPA 1978).

    Hazardous Decomposition or Byproducts:  When the liquid is heated it
    may release  irritating, toxic sulfur dioxide gas  (*CHRIS 1978).

    Hazardous Polymerization:   May Occur:
                               May Not Occur: Yes  (Weiss 1980,  p. 891)

        Conditions to Avoid:   Not Found

-------
                                      CAS Registry Number:  7446-09-5
                                      Page 3 of 3
                           SULFUR DIOXIDE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (-Sax 1975)
                       Skin:   Yes  (*Sax 1975)
                       Ingestion:  Yes  (*Sax 1975)

    Health Hazards  (Acute, Delayed,  and Chronic):   It may cause  death or
    permanent injury after very  short exposure to small quantities (*Sax
    1975).  1,000  ppm causes death in from 10 minutes to several hours  by
    respiratory depression ("Thienes 1972).  It is an eye and respiratory
    tract  irritant ("Grant 1974; -Gosselin 1976).

    Signs and  Symptoms of Exposure:   Symptoms  include  coughing,  fatigue,
    nausea, choking, headache, abdominal pain, tightness and burning sensation
    in the chest,  rapid and shallow respiration, bluing of the skin, anxiety,
    mental confusion,  pulmonary  edema and death (Gosselin 1984, p. III-323).
    Contact with liquid sulfur dioxide  may cause frostbite ("DOT 1984).

    Medical Conditions  Generally Aggravated by Exposure:  Persons with
    asthma, subnormal pulmonary  functions or cardiovascular disease are at a
    greater risk (*OSHA 1977 Public hearing on occupational standard for
    sulfur dioxide (PB83-182485); "Encyc Occupat Health and Safety 1971).

    Emergency and  First Aid  Procedures:  Move victim to fresh air; call
    emergency medical care.  If  not breathing give artificial respiration.  If
    breathing is difficult, give oxygen.  Remove and isolate contaminated
    clothing and shoes  at  the  site.  In case of contact with the material,
    immediately flush skin or  eyes with running water for at least 15
    minutes.   Keep victim  quiet  and maintain normal body temperature ("DOT
    1984).


SECTION  VI -- USE INFORMATION

    It is  used in preserving fruits and vegetables (*Merck 1976).  Chemical
    intermediate for various organic syntheses (*SRI); antioxidant (*Patty
    1963); bleaching agent; inhibitor for various reactions in manufacturing
    process;  solvent and refrigerant (*SRI).


SECTION  Vll'-- PRECAUTIONS  FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is  Released or Spilled)

    Keep unnecessary people away.  Stay upwind and out of low areas.  Wear
    self-contained breathing apparatus  and full protective clothing.  In case
    of spills'or leaks, stop leak if you can do so without risk.  Use water
    spray to reduce vapor  but  do not put water on the spill.  If the spill is
    from a drum or small container isolate 120 feet in all directions.   For
    large spills isolate 250 feet in all directions, then evacuate in a
    downwind direction, an area  of 0.6  miles wide and 0.9 miles  long (*DOT
    1984).

-------
                                     CAS Registry Number:  7446-11-9
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- SULFUR TRIOXIDE

CAS Registry Number:  7446-11-9

Synonyms (NIOSH/RTECS 1983 Synonyms,  Volume 3,  p.  677):  Sulfan; Sulfuric
Anhydride;  Sulfuric Oxide

Chemical Formula:   SO.

Molecular Weight:  80.06


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC^   inhalation
    (guinea pig) 0.03 mg/liter/6  hours (-NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   113°F, 45°C (all forms) (Hawley 1981,  p.  983)

    Specific Gravity (H  0=1):  Alpha form:  1.97  at 30°C;  Gamma form
    (liquid):   1.920 at 20°C/4°C  (Weast 1979, pp. B-132 - B-133)

    Vapor Pressure (mmHg):   Alpha  form:  73  at 25°C;  Beta form:  344 at
    25°C;  Gamma form:  433 at 25°C  (Merck 1983, p.  1289)

    Melting Point:   Alpha  form:  144°F, 62°C;  Beta form:   90.5°F,  32.5°C;
    Gamma form:  62.2°F, 16.8°C  (Hawley 1981, p.  983)

    Vapor Density (AIR=1):   2.76 (Sax 1984,  p. 2492)

    Evaporation Rate  (Butyl acetate=l):  Not  Found

-------
                                      CAS Registry Number:   7446-11-9
                                      Page 2 of 4
                          SULFUR TRIOXIDE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Solubility  in Water:  Decomposes in water (Weast 1978,  p. B172)

    Appearance  and Odor:  Alpha form and Beta form:   asbestos-like needles;
    Gamma  form:   ice-like mass or liquid (Merck 1983,  p.  1289)


SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:  Not Found

    Extinguishing Methods:  Do not get water inside container.  Small
    fires:   dry  chemical or carbon dioxide.   Large fires:   flood fire area
    with water from  a distance.  Do not get  solid stream  of water on spilled
    material.  Move  container from fire area if you can do so without risk.
    Spray  cooling water on containers that are exposed to flames until well
    after  fire is  out (DOT 1984, Guide 39).

    Special  Fire  Fighting  Procedures:  Keep  unnecessary people away;
    isolate hazard area and deny entry.  Stay upwind;  keep out of low areas.
    Ventilate  closed spaces before entering  them.   Wear positive pressure
    breathing  apparatus and special protective clothing (DOT 1984, Guide 39).

    Unusual Fire and Explosion Hazards:  Fire risk in contact with  organic
    materials.   An explosive increase in vapor pressure occurs when the alpha
    form melts (Hawley 1981, p, 983).  Combines with water with explosive
    violence,  forming sulfuric acid (Merck 1983,  p. 1289).  May ignite other
    combustible  materials  (wood, paper, oil, etc.). Flammable  poisonous
    gases  may  accumulate in tanks and hopper cars.   Runoff to sewer may create
    fire or explosion hazard (DOT 1984, Guide 39).


SECTION  IV --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                 Stable:   Not Found

        Conditions to Avoid:  On exposure to air, it absorbs moisture and
        emits  dense  white fumes (Merck 1983, p. 1289).

-------
                                      CAS Registry Number:  7446-11-9
                                      Page 3 of 4
                          SULFUR TRIOXIDE
SECTION  IV --  REACTIVITY DATA (Continued)

    Incompatibility  (Materials to Avoid):  Water and organic materials
    (Hawley 1981, p. 983)

    Hazardous Decomposition or Byproducts:  Forms sulfuric  acid on contact
    with water  (Merck  1983, p. 1289).

    Hazardous Polymerization:  May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Sax 1984,  p.  2492)
                      Skin:  Not Found
                      Ingestion:   Yes (DOT 1984,  Guide 39)

    Health Hazards  (Acute, Delayed,  and  Chronic):  This material is highly
    toxic  (Hawley  1981,  p. 983).  It is an irritant  and corrosive to mucous
    membranes (Merck 1983, p. 1289).  Poisonous if inhaled or swallowed.
    Contact causes  severe  burns to skin and eyes (DOT 1984, Guide 39).

    Signs  and Symptoms of Exposure:  This material may cause  coughing,
    choking,  and severe  discomfort at a concentration of  1 ppm  (Merck 1983, p.
    1289).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Move victim to fresh air; call
    emergency medical care.  If not breathing, give  artificial  respiration.
    If breathing is difficult, give oxygen.  Remove  and isolate contaminated
    clothing  and shoes at  the site.  Speed in removing material from skin is
    of extreme importance.   In case of contact with  material, immediately
    flush  skin or  eyes with  running water for at least 15 minutes.  Keep
    victim quiet and maintain normal body temperature (DOT 1984, Guide 39).


SECTION  VI  --  USE INFORMATION

    This material  is used  in the sulfonation of organic compounds and in solar
    energy collectors (Hawley 1981, p. 983).  It is  an intermediate in
    sulfuric  acid  manufacture and in the manufacture of explosives  (Merck
    1983,  p.  1289).

-------
                                      CAS Registry Number:   7446-11-9
                                      Page 4 of 4
                          SULFUR TRIOXIDE
SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken  in Case Material is Released or Spilled)

    Avoid inhalation.  Wear proper respiratory protection  (see  Section V
    above).   Do not get water inside container; stop leak  if you can do so
    without  risk.   Do not touch spilled material.   Use water spray to reduce
    vapors but do not put water on leak or spill area.  Keep combustibles
    (wood, paper, oil, etc.) away from spilled material.   Dike  spill for later
    disposal;  do not apply water unless directed to do so.  Clean up only
    under Supervision of an expert (DOT 1984,  Guide 39).
COMMENTS:

    Sources  searched but no information found:
        ACGIH 1983
        NIOSH/OSHA  1978
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton  and Clayton 1981-82
        Arena 1979
        Gosselin 1984
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes 1982
        Physicians' Desk Reference 1985
        Gilman 1985

-------
                                           CAS Registry Number:  7446-18-6
                                           Page 1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- THALLOUS SULFATE

CAS Registry Number:   7446-18-6

Synonyms:  (NIOSH/RTECS 1983 SYNONYMS, VOLUME 3,  p.  706)
Thallium(I)Sulfate(2:l); C.F.S.;  CSF-Giftweizen; Dithallium Sulfate;
Dithallium(l+) Sulfate; M7-Giftkoerner; Rattengiftkonserve; Sulfuric Acid,
Dithallium(l+) Salt; Sulfuric Acid, Thallium(l+) Salt (1:2);  Thallium Sulfate;
Thallium(I)  Sulfate
Hayes 1982 Synonyms, p. 25)  Bonide  Antzix  ant killer®;  GTA ant bane®;
GTA bait®; Magikil Jelly ant bait®, Martin's Rat-Stop®, Liquid Mission
Brank ant-roach killer®; Rex ant  bait®

Chemical Formula:   Tl SO,

Molecular Weight:  504.80


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  (Thallium Soluble  Compounds, as Tl)  Air:  TWA 0.1 mg/m3
    (skin)  (OSHA 1984, p. 663)

    ACGIH TLV:   (Thallium Soluble Compounds,  as Tl)  TWA 0.1 mg/mj  (skin)
    (ACGIH 1985, p. 31)

    IDLH:   (Thallium Compounds,  Soluble) 20 mg/m3  (NIOSH/OSHA 1978,
    p.  178)

    Other Limits Recommended:   Toxicity information:   LD     oral (man
    0.007  mg/mg; LD5Q oral (rat)  20.3 mg/kg (*NIOSH/RTECS  1985).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Decomposes (Weast 1979,  p.  B-134)

    Specific Gravity (H20=l):  6.77 (Weast 1979, p.  B-134)

    Vapor Pressure (mmHg):  Inappreciable  (Hayes 1982, p. 25)

    Melting  Point:   1170°F,  632°C (Weast 1979, p. B-134)

    Vapor Density (AIR=1):   Not  Found

-------
                                            CAS Registry Number:  7446-18-6
                                            Page 2 of 4
                         THALLOUS SULFATE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Evaporation Rate (Butyl acetate=l):  .Not Found

    Solubility  in Water:  4.87 g/100 ml at 20°C,  19.14 g/100 ml  at  100°C
    (Weast 1979, p.  B-134)

    Appearance and Odor:  White rhomboid prisms to a colorless dense
    powder;  odorless (Hayes 1982, p. 25; Merck 1983, p.  1325; Hawley  1981, p.
    1013)


SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing  Methods:   (Non-Specific --  Thallium Salts, n.o.s.)  If
    material is involved in fire, extinguish fire using agent suitable for
    type of  surrounding fire  (material itself does not burn).   Use water  in
    flooding quantities as  fog.  Use foam, carbon dioxide  or dry chemical
    (Student 1981, p. 497).  For small fires use dry chemical,  carbon dioxide,
    water  spray, or  foam.  For large fires use water spray, fog, or foam.
    Move container from fire area if you can do so without risk (DOT  1984,
    Guide  53).

    Special  Fire Fighting  Procedures:  (Non-Specific -- Thallium Salts,
    n.o.s.)  For personnel protection avoid breathing dusts, and fumes from
    burning  material.  Keep upwind.  Avoid bodily contact  with  the material.
    Wear boots,  protective gloves, and goggles.   Do not handle  broken packages
    without  protective equipment.  Wash away any material  which may have
    contacted  the body with copious amounts of water or soap and water.  Wear
    self-contained breathing apparatus when fighting fires involving  this
    material.   If contact with the material is anticipated, wear full
    protective clothing (Student 1981, p. 497).   Keep unnecessary  people  away;
    isolate  hazard area and deny entry.  Stay upwind; keep out  of  low areas
    (DOT 1984,  Guide 53).

    Unusual Fire and Explosion Hazards:  When heated to decomposition,  it
    emits  very toxic fumes of thallium and sulfur oxide (Sax 1984, p. 2557).

-------
                                            CAS Registry Number:  7446-18-8
                                            Page 3 of 4
                         THALLOUS SULFATE
SECTION  IV  --  REACTIVITY DATA

    Stability:   Unstable:   Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:   When heated to  decomposition,
    it emits  very toxic fumes of thallium and sulfur oxides  (Sax  1984, p.
    2557).

    Hazardous Polymerization:   May Occur:   Not Found
                               May  Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V --  HEALTH HAZARD  DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Yes (Sax 1984,  p.  2557)

    Health Hazards  (Acute, Delayed,  and Chronic):  Rated as  extremely
    toxic.  The  probable oral lethal dose in humans is  5 to  50  mg/kg, or
    between 7 drops  and 1  teaspoon for a 150-pound person (Gosselin  1984, p.
    11-139).  The mean lethal dose in an adult is  probably about  1 gm of
    thallium  sulfate (Gosselin  1984,  p. Ill 380).   Chronic exposure  causes
    hair loss starting 10  days  after exposure and  complete baldness  in about a
    month  (Clayton and Clayton  1981-82, p.  1922).

    Signs and Symptoms of Exposure:   Can cause death due to shock.
    Dominant  effects include severe abdominal pain, vomiting  and  diarrhea.
    Blood  in  vomitus and stools are often seen.  In severe cases, tremors,
    delirium, convulsions, paralysis, coma and even death may occur  (Gosselin
    1984,  p.  III-381).

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency  and  First Aid Procedures:  (Non-Specific --  Thallium Salts,
    n.o.s.)  Move victim to  fresh air; call emergency medical care.  Remove
    and isolate  contaminated clothing and shoes at the site.  In  case of
    contact with material, immediately flush skin  or eyes with  running water
    for at least 15  minutes  (DOT 1984, Guide 53).

-------
                                            CAS Registry Number:  7446-18-6
                                            Page 4 of 4
                         THALLOUS SULFATE
SECTION  VI --  USE  INFORMATION

    Used as a rat  poison,  as ant bait and as a reagent in analytical  chemistry
    (Merck 1983, p.  1325).  Also used for analysis (testing for  iodine  in the
    presence of  chlorine); ozonometry; rodenticide; and pesticide  (Hawley
    1981,  p. 1013).   Not  registered as a pesticide in the U.S.  (USEPA/Pesticide
    Index 1985).
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    (Non-Specific -- Thallium Salts, n.o.s.)  Do not touch spilled  material;
    stop leak if  you can do so without risk.  Small spills:   absorb with  sand
    or other noncombustible absorbent material and place into containers  for
    later disposal.  Small dry spills:  with clean shovel place material  into
    clean, dry container and cover; move containers from spill area.  Large
    spills:  dike far ahead of spill for later disposal.  Keep unnecessary
    people away;  isolate hazard area and deny entry.  Stay upwind;  keep out of
    low areas.  Wear self-contained (positive pressure if available)  breathing
    apparatus and full protective clothing (DOT 1984,  Guide 53).


COMMENTS

    Sources searched but no information found:
        NFPA 1984
        Weiss 1980
        CHRIS 1978
        Arena 1979
        Encyc Occupat Health and Safety 1983
        Buchel 1983
        Farm Chemicals Handbook 1984
        Doull 1980

-------
                                            CAS  Registry Number:  7487-94-7
                                            Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- MERCURIC CHLORIDE

CAS Registry Number:   7487-94-7

Synonyms:  Mercury (II) Chloride; Abavit B; Bichloride  of Mercury;
Calochlor;  Corrosive Mercury Chloride;  Corrosive Sublimate;  Dichloromercury;
Fungchex;  MC;  Mercuric Bichloride;  Mercury Bichloride; Mercury Bichloride;
Mercury Perchloride; NCI-C60173; Perchloride of Mercury; Sublimate; Sulem;  TL
898; Mercuric  Chloride, Solid (DOT);  Mercury Chloride

Chemical Formula:  HgCl

Molecular Weight:   271.52


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:   TWA  0.10 mg (Hg)/m3  (*ACGIH 1983)

    IDLH:  Not Found
    Other Limits Recommended:    NIOSH  recommended standard --  Air:  TWA
    0.05 mg/m3  (as mercury).  Toxicity information:  LC..   inhalation

    (mouse)  0.30 mg/liter/10 minutes (*NIOSH/RTECS 1985).
SECTION  II — PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   576°F,  302°C  (*Weast 1979)

    Specific Gravity (H 0=1):   5.44 at 25°C (*Weast 1979)

    Vapor Pressure  (tnmHg):  1 at 136.2°C  (*Sax  1979)

    Melting Point:   529°F,  276°C  (*Weast 1979)

    Vapor Density (AIR=1):  Not  Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility  in Water:  6.9 g/100 ml  at  20°C (*Weast 1979)

-------
                                            CAS Registry Number:   7487-94-7
                                            Page 2 of 3
                        MERCURIC CHLORIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Appearance and Odor:  White crystals or powder  (*Weast 1979); odorless
    (Weiss 1980,  p.  581)


SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  Some of these materials may burn but none of
    them ignite readily.  Extinguish with water spray,  fog, foam, dry chemical
    or carbon  dioxide  (*DOT 1984).

    Special  Fire Fighting  Procedures:  Move container from fire area.  Wear
    self-contained breathing apparatus and full body protective clothing (*DOT
    1984).

    Unusual Fire and Explosion Hazards:  Material may  explode  on  heating,
    with friction, or contact with alkali metals,  sulfides, acetylene,
    ammonia, and  oxalic acid (*Rumack 1975 to Present).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (Weiss 1980,  p.  581)

        Conditions to Avoid:  Mercuric chloride may explode with friction
        or application of heat.  Mixtures of mercuric chloride and sodium or
        potassium are shock sensitive and will explode  on impact (*NFPA
        1978).  Avoid contact with acids or acid fumes  (*Sax 1975).

    Incompatibility (Materials to Avoid):   Formates, sulfites,
    hypophosphites,  phosphates, sulfides, albumin,  gelatin, alkalies, alkaloid
    salts,  ammonia,  lime water, antimony, arsenic,  bromides, borax,
    carbonates, reduced iron, copper, iron, lead,  silver salts, infusions of
    cinchona,  columbo, oak bark or senna, and tannic acid (*Merck 1983).

    Hazardous  Decomposition or Byproducts:  Upon decomposition highly toxic
    chloride and  mercury fumes  are emitted (*Sax 1975).

    Hazardous  Polymerization:  May Occur:  Not Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  7487-94-7
                                            Page 3 of 3
                        MERCURIC  CHLORIDE
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Weiss 1980, p.  581)
                      Skin:   Yes  (-Gosselin 1976)
                      Ingestion:  Yes (-Browning 1969)

    Health Hazards  (Acute, Delayed,  and  Chronic):   It is classified as
    extremely toxic.   All  forms  of mercury are poisonous if  absorbed.
    Probable oral  lethal dose  is 5-50 mg/kg; between 7  drops and 1  teaspoonful
    for a 150 Ib.  person.  Mercuric chloride is one of  the most toxic  salts of
    mercury (*Gosselin 1976).  Material attacks the gastrointestinal tract and
    renal systems  (*Friberg  1979).

    Signs and Symptoms of Exposure:  Ingestion of the material can lead to
    acute gastric  pain; nausea;  vomiting; weak, rapid,  irregular pulse;  and
    cold clammy  skin.  In  fatal  cases, fainting, convulsions and/or
    unconsciousness  precede  death  ("Browning 1969).

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid Procedures:  Move victim  to fresh air; call
    emergency medical  care.  Remove and isolate contaminated clothing  and
    shoes at the site.  In case  of contact with material,  immediately  flush
    skin or eyes with  running water for at least 15 minutes  ("DOT 1984).


SECTION  VI --  USE INFORMATION

    Preserving wood  and anatomical specimens; embalming; browning and  etching
    steel and iron (*Merck 1983);  catalyst for organic  synthesis;
    disinfectant;  antiseptic; tanning; textile printing aid; manufacture of
    dyes;  agricultural chemicals and dry batteries; Pharmaceuticals; and
    photographic chemicals ("SRI).


SECTION  VII  — PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to be Taken in  Case Material is Released or Spilled)

    After spill  keep unnecessary people away and stay upwind.  Wear
    self-contained breathing apparatus and full protective clothing.   If water
    pollution occurs,  notify appropriate authorities.   Do not touch spilled
    material;  stop leak if you can do so without risk.   Small spills:   absorb
    with sand or other noncombustible absorbent material and place into
    containers for later disposal.  Small dry spills:   with  clean shovel place
    material into  clean, dry container and cover; move  containers from spill
    area.   Large spills:   dike far ahead of spill for later  disposal  (*DOT
    1984).

-------
                                     CAS Registry Number:  7550-45-0
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- TITANIUM TETRACHLORIDE

CAS Registry Number:  7550-45-0

Synonyms:  Tetrachlorotitanium;  Titanic Chloride; Titanium Chloride,
(T-4)-;  Titanium Chloride

Chemical Formula:   TiCl.
                       4
Molecular  Weight:  189.73


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC5Q inhalation
    (mouse)  0.1 mg/liter/2 hours  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   277.5°F,  136.4°C  (*Merck 1976)

    Specific Gravity (H  0=1):  1.726•(*Merck 1976)

    Vapor Pressure (mmHg):   10 at 21.3°C (Encyc Occupat Health and Safety
    1983,  p.  2180)

    Melting Point:   -11.4°F, -24.1°C (*Merck 1976)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Soluble  in cold water (*Merck  1976)

    Appearance and Odor:  A  colorless (*Merck 1976) or light yellow (*Weast
    1979)  liquid with penetrating acid odor (*Merck 1976)

-------
                                      CAS Registry Number:  7550-45-0
                                      Page 2 of 4
                       TITANIUM TETRACHLORIDE
SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  Not flammable (Weiss  1980,  p.  869).  For  small
    fires, use dry chemical or carbon dioxide.  For large fires,  flood fire
    area with water  from  a  distance.  Do not get solid streams of water on
    spilled material.  Move container from fire area if this can  be done
    without risk.  Cool containers exposed to flames with water until  well
    after  fire is out  (-DOT 1984).

    Special  Fire Fighting  Procedures:  Not Found

    Unusual  Fire and Explosion Hazards:  Material will react with water to
    produce hydrochloric  acid  (*Thienes 1972).  It may ignite other
    combustible materials  (e.g., wood, oil,  etc.). Flammable, poisonous gases
    may accumulate in tanks and hopper cars.  Runoff to sewer may create fire
    or explosion hazard (*DOT  1984).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (Weiss 1980, p.  869);  in concentrated
                         aqueous solutions ("Hawley 1977)

        Conditions  to Avoid:  Avoid contact with moisture; the chemical
        absorbs  moisture  from air and evolves dense white fumes (Merck 1983,
        p.  1357).

    Incompatibility  (Materials to Avoid):  Water, moist air (Weiss 1980,  p.
    869)

    Hazardous Decomposition or Byproducts:  Reacts strongly with water to
    release hydrochloric  acid and heat  (*Thienes 1972).

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not  Found

        Conditions  to Avoid:  Not Found

-------
                                      CAS Registry Number:  7550-45-0
                                      Page 3 of 4
                       TITANIUM TETRACHLORIDE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (*Sax  1979)
                       Skin:   Yes  (*Sax 1979)
                       Ingestion:  Yes  (*Rumack 1975 to Present)

    Health Hazards  (Acute, Delayed,  and Chronic):   This compound  is  a
    highly corrosive,  acute  irritant to  the skin, eyes, mucous membranes and
    the respiratory tract.   It  is  capable of  causing death or permanent injury
    due to exposures encountered in normal use ("Sax 1979).  Even short
    contact may lead to eye  inflammation which may result in corneal opacities
    (Encyc Occupat  Health  and  Safety 1983, p. 2180).

    Signs and  Symptoms of Exposure:   Inhalation  symptoms  include congestion
    and irritation  of  upper  respiratory  tract ('"Browning 1969), coughing,
    burning of the  throat, headache and  weakness.  Prolonged exposure to low
    concentrations  may cause cough and pneumonia (*Rumack 1975 to Present).
    Ingestion causes mouth,  throat and GI tract irritation, nausea,  vomiting,
    cramps and diarrhea (Weiss  1980, p.  869).  Corneal damage has been  '
    observed in individuals  exposed to  fumes  ("Grant 1974).

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid Procedures:  Move victim to fresh air  and call
    emergency medical  care.  Remove and  isolate contaminated clothing and
    shoes  at the site.  Speed  in removing material from skin is of extreme
    importance.  In case of  contact, immediately flush skin or eyes  with
    running water for  at least  15  minutes.  Keep victim quiet and maintain
    normal body temperature  ("DOT  1984).  If  skin is exposed, however,  wipe
    off with dry cloth before  applying water  ("Rumack 1975 to Present).


SECTION  VI -- USE INFORMATION

    Used in the manufacture  of  titanium  salts, mordant dye, and titanium
    pigments ("Hawley  1977), and used as a chemical intermediate for titanium
    metal, titanium dioxide, as an agent in smoke screens,  polymerization
    catalyst,  and iridescent agent in glass and pearl manufacturing  (*SRI).

-------
                                      CAS Registry Number:  7550-45-0
                                      Page 4 of 4
                       TITANIUM TETRACHLORIDE
SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING  AND USE
(Steps to  be Taken in  Case Material is Released or Spilled)

    Ventilate closed spaces before entering  (*DOT 1984).   In case of
    emergency,  keep unnecessary  people away  and isolate hazard area.  Stay
    upwind and keep out  of low areas.  If there is a small spill or leak
    isolate 30 feet in all directions.  In case of a large spill isolate 60
    feet in all directions, then evacuate in a downwind direction an area 0.2
    miles  wide and 0.2 miles  long ("DOT 1984).  Workers exposed to titanium
    chloride should be supplied  with respiratory and skin protection (*Encyc
    Occupat Health and Safety 1971) including goggles and face shield,  air
    supplied mask or approved canister, rubber gloves, and protective clothing
    (*CHRIS 1978).   Workers should receive periodic medical exam at least
    annually and those manifesting signs of persistent injury to upper
    respiratory tract  should  be  transferred to other work (*Encyc Occupat
    Health and Safety  1971).

-------
                                     CAS Registry Number:   7580-67-8
                                     Page  1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- LITHIUM HYDRIDE

CAS Registry Number:   7580-67-8

Synonyms:  Lithium Monohydride; Lithium Hydride  (LiH)

Chemical Formula:  LiH

Molecular  Weight:   7.95


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   TWA 0.025 mg/m3 (*NIOSH/RTECS 1985)

    ACGIH TLV:   TWA 0.025 mg/m3 (*ACGIH 1984)

    IDLH:  Air:  50 mg/m3 (*NIOSH/OSHA 1978)

    Other Limits  Recommended:   Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H  0=1):  0.76-0.77 (*Merck  1983)

    Vapor Pressure  (mmHg):  0 at 20°C  (*NIOSH/OSHA 1981)

    Melting Point:  1256°F,  680°C  (*Merck 1983)  1267°F, 686°C (*NIOSH/OSHA
    1978)

    Vapor Density  (AIR=1):   Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility in Water:   Decomposes  (Merck 1983, p.  793)

    Appearance and Odor:  Pure lithium hydride is a white or translucent
    crystalline mass or powder (*Hawley 1981).  However,  the commercial
    product is usually gray (*Merck  1983).   Lithium hydride is odorless
    (-CHRIS 1978).

-------
                                       CAS  Registry Number:   7580-67-8
                                       Page 2 of 4
                         LITHIUM HYDRIDE
SECTION  III -- FIRE  AND EXPLOSION HAZARD DATA

    Flash  Point (Method  Used):  Not Found
    Flammable  Limits:   Flammable  solid (*NIOSH/RTECS  1985)
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Do not use water, carbon dioxide, dry chemical,
    or halogenated  extinguishing  agents such  as carbon tetrachloride (*NFPA
   .1978).   Use dry graphite;  or  ground dolomite-based dry chemical
    extinguishers such as  "Lith-X"  (*NFPA  1978, *Clayton and Clayton 1981-2).
    Fires  may be smothered by  inverting a  can over them (*NFPA 1984).

    Special  Fire Fighting Procedures:  Wear protective goggles or face
    shield,  rubberized gloves,  flame-proof outer clothing, respirator, and
    high boots or shoes  (*CHRIS 1978).  Large fires:  withdraw from area and
    let fire burn,  as  lithium  hydride  may  continue to re-ignite (*DOT 1984).
    A fire,  once started,  cannot  be extinguished by ordinary methods (*Clayton
    and Clayton 1981-82).

    Unusual  Fire and  Explosion Hazards:   In a  fire,  irritating alkali  fumes
    may form (*CHRIS 1978).  Lithium hydride  can form airborne dust clouds
    which may explode  on contact  with  flame,  heat, or oxidizing materials
    (*NFPA 1978).   Additionally,  spontaneous  ignition occurs when nitrous
    oxide and lithium  hydride  are mixed.   Lithium hydride also forms explosive
    mixtures with liquid oxygen (-NFPA 1978).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Yes  (NFPA  1984,  p.  49-59)
                 Stable:

        Conditions  to  Avoid:   Lithium  hydride may ignite spontaneously  in
        air  and should be  maintained and handled out of contact with air and
        moisture (^Clayton and Clayton 1981-82).  Any contact with nitrous
        oxide;  airborne  powders may ignite upon reaching moisture (*NFPA 1978).

    Incompatibility  (Materials  to  Avoid):   Incompatible with air and
    moisture (^Clayton and Clayton 1981-82),  nitrous oxide, strong oxidizers,
    and liquid oxygen  (*NFPA  1978).

    Hazardous  Decomposition or Byproducts:  Contact with heat, moisture or
    acid causes exothermic reaction and evolution of hydrogen as well as
    lithium  hydroxide  (*Clayton and Clayton  1981-82).

-------
                                      CAS Registry Number:  7580-67-8
                                      Page 3 of 4
                         LITHIUM HYDRIDE
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Polymerization:   May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (*DOT 1984)
                      Skin:  Yes  (*DOT 1984)
                      Ingestion:   Yes (*Grant 1974;  -Clayton  and Clayton
                                  1981-82)

    Health Hazards  (Acute, Delayed,  and Chronic):  This material is
    relatively toxic to  people.  It is more likely to cause irritation of skin
    and mucous membrane  tissues rather than death.  Its effects  are primarily
    acute.  A massive exposure to the eyes and by inhalation may be lethal
    (*DOT  1984;  *Rumack  1975 to Present).

    Signs  and Symptoms of Exposure:  Contact with mucous surfaces  of  eyes,
    upper  respiratory tract, and skin produces tissue injury with features of
    thermal damage  and alkali corrosion (i.e., burning, tearing, stinging of
    eyes,  coughing,  breathing difficulty,  burns,  and lesions).   Large doses by
    ingestion may cause  dizziness and collapse (*NFPA 1978, *Gosselin 1976).'

    Medical  Conditions Generally Aggravated by Exposure:   Those
    experiencing any ailment of the upper respiratory tract (e.g., bronchitis
    or pneumonia) are at a greater risk (*Rumack  1975 to Present).

    Emergency and First Aid  Procedures:   Move victim to fresh  air; call
    emergency medical care.  Remove and isolate contaminated clothing and
    shoes  at site.   Wipe material from skin immediately.   Flush  skin or eyes
    with running water for minimum of 15 minutes  (*DOT 1984).

SECTION  VI --  USE  INFORMATION

    Lithium hydride  is a reducing agent used for  condensing ketones and acetic
    esters.   Used as  a desiccant in hydrogen generators ("Merck  1983).
    Preparation of  double hydrides used in nuclear shielding materials
    (-Hawley 1981).   Used in the manufacture of electronic tubes, ceramics,
    and chemical synthesis (*Doull 1980).

-------
                                     CAS Registry Number:  7580-67-8
                                     Page 4 of 4
                        LITHIUM HYDRIDE
SECTION VII -- PRECAUTIONS FOR  SAFE HANDLING AND USE
(Steps to be Taken in Case Material  is Released or Spilled)

    Isolate hazard area and deny entry.  Stay upwind; keep out  of  low areas.
    Wear self-contained breathing apparatus and full protective clothing.  In
    the event of a spill or leak, shut off ignition sources;  no flares,
    smoking or other sources of flame.  Do not touch spilled  materials.  Do
    not allow material to contact water.  Shovel up small spills with
    noncombustible absorbent material.  Confine large spills  with  dikes,
    sheets, or tarps to stop spreading (*DOT 1984).

-------
                                     CAS Registry Number:  7631-89-2
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  SODIUM ARSENATE

CAS Registry  Number:  7631-89-2

Synonyms (NIOSH/RTECS 1983  Synonyms, Volume  1, p< 439):  Arsenic Acid,
Sodium Salt;, Fatsco Ant Poison; Sodium Arsenate  (DOT); Sodium Orthoarsenate;
Sweeney's  Ant-Go

Chemical Formula:   AsH 0 »xNa

Molecular Weight:


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  TWA 10 yg  (As)/m3 (NIOSH/RTECS  1983, Volume 1,  p. 439)

    ACGIH TLV:  Air:  TWA 200 yg  (As)/m3  (NIOSH/RTECS 1983, Volume. 1,
    p.  439)

    IDLH:  Not Found

    Other Limits Recommended:   Occupational exposure to  inorganic arsenic
    recommended standard:   Air:   ceiling 2 mg/m3/15 minutes (Sax 1984,  p.
    319).  Toxicity information:  LD.   oral (rabbit) 12.5 mg/kg
                                  low
    ("NIOSH/RTECS 1985).


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific  Gravity (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not  Found

    Melting Point:   Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:   Not Found

    Appearance and Odor:  Not Found

-------
                                      CAS Registry Number:   7631-89-2
                                      Page 2 of 3
                         SODIUM  ARSENATE
SECTION  III  --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing Methods:  Small fires:   dry  chemical, carbon dioxide,
    water  spray  or foam.  Large fires:  water spray,  fog or foam.  Move
    container from fire area  if you can do it without risk (DOT 1984, Guide
    53).

    Special Fire Fighting  Procedures:   Keep unnecessary people away;
    isolate hazard area and deny entry.  Stay upwind; keep out of low areas.
    Wear self-contained (positive pressure if available) breathing apparatus
    and full  protective clothing.  If water pollution occurs, notify
    appropriate  authorities (DOT 1984, Guide 53).

    Unusual  Fire and Explosion Hazards:  When heated to  decomposition,  it
    emits  toxic  fumes of arsenic (Sax 1984, p.  319).
SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:   When heated to decomposition,
    it emits  toxic fumes of arsenic (Sax 1984, p.  319).

    Hazardous Polymerization:  May Occur:   Not Found
                               May Not  Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Not Found
                      Skin:  Not Found
                      Ingestion:   Yes (Sax 1984,  p.  319)

    Health Hazards (Acute,  Delayed, and  Chronic):   (Non-Specific --
    Arsenic)  High mortality rate due  to acute poisoning usually within 48
    hours  (Gosselin 1984, p. 111-42).

-------
                                      CAS Registry Number:  7631-89-2
                                      Page 3 of 3
                          SODIUM ARSENATE
SECTION  V -- HEALTH HAZARD DATA (Continued)

    Signs and Symptoms of Exposure:   (Non-Specific -- Arsenic)  Death can
    occur due to a severe  decrease in blood pressure.   Thickening  of skin on
    palms and soles following chronic low-level exposures.   Symptoms usually
    appear one-half to  one hour  after ingestion but may be  delayed many
    hours.  These symptoms include:  a feeling of constriction  of  throat,
    difficulty swallowing, abdominal discomfort with pain,  vomiting, watery
    diarrhea,  sweetish  metallic  taste, garlicky odor of breath  and stools, and
    dizziness with frontal headaches (Hayes 1982, p.  41;  Gosselin  1984, p.
    111-42).

    Medical  Conditions  Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid Procedures:   Move victim  to fresh air; call
    emergency medical care.  Remove and isolate contaminated clothing and
    shoes at the site.   In case  of contact with material, immediately flush
    skin or eyes with running water for at least 15 minutes (DOT 1984, Guide
    53).


SECTION  VI  --• USE INFORMATION

    Insecticide  (Farm Chemicals  Handbook 1984, p. C-207).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    Do not touch spilled material; stop leak if you can do  so without risk.
    Small spills:   absorb  with sand or other non-combustible absorbent
    material and place  into  containers for later disposal.   Small  dry spills:
    with clean shovel place  material into clean, dry container  and cover; move
    containers from spill  area.  Large spills:  dike far ahead  of  spill for
    later disposal (DOT 1984, Guide 53).


COMMENTS:

    Sources searched but no  information found:
        Weast 1979
        Merck 1983
        NIOSH/OSHA 1978
        ACGIH 1984
        Weiss 1980
        Hawley 1981
        Student  1981
        DASE 1980
        Clayton  and Clayton  1981-82
        Encyc Occupat Health and Safety 1983

-------
                                      CAS  Registry  Number:  7637-07-2
                                      Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31.  1985
                                                   Revision:
CHEMICAL IDENTITY -- BORON TRIFLUORIDE

CAS Registry Number:   7637-07-2

Synonyms:  ANCA 1040;  Borane, Trifluoro-; Boron Fluoride; Boron Fluoride
(BF3);  Trifluoroboron

Chemical Formula:  BF

Molecular  Weight:  67.82


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   Ceiling concentration 1  ppm  (3 mg/m3) (NIOSH/OSHA 1978,  p.
    50)

    ACGIH TLV:  TWA (Ceiling) 1 ppm (3 mg/m3)  (ACGIH  1983, p. 12)

    IDLH:  100  ppm (NIOSH/OSHA 1978,  p.  50)

    Other Limits Recommended:  Not Found


SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  -148°F,  -99.9°C (*Weast 1979); -148.7°F, -100.4°C;
    -196.8°F,  -127.1°C  (Merck 1983,  p. 187)

    Specific Gravity (H20=l):   Liquid:  1.6 (BASE 1980,  p.  216)

    Vapor Pressure (mmHg):  Liquid:   760 at  -110.7°C; (SUSPECT) Solid:   40
    at  -131.0°C  (*Weast 1979)

    Melting Point:  -196.1°F,  -126.7°C (*Weast 1979)

    Vapor Density (AIR=1):  2.4 (BASE 1980, p. 216)

    Evaporation  Rate  (Butyl  acetate=l):   Not  Found

    Solubility in Water:  332 g/100 ml  at  0°C  (-"Merck  1983); 106 g/100 ml
    (Weast 1979,  p. B-102); some hydrolysis occurs  (Merck 1983, p.  187)

    Appearance  and Odor:  Colorless  gas with a  pungent, suffocating odor
    (*Merck 1983)

-------
                                            CAS Registry Number:  7637-07-2
                                            Page 2 of 3
                         BORON TRIFLUORIDE
SECTION  III -- FIRE AND EXPLOSION HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:  Not Flammable (NIOSH/OSHA 1978, p. 50)
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  Extinguish with dry chemical,  carbon dioxide,
    water  spray,  fog, or  foam  (DOT 1984, Guide 15).

    Special  Fire Fighting Procedures:  Keep unnecessary people away;
    isolate hazard area  and deny entry.  Stay upwind; keep out of low areas.
    Ventilate closed  spaces before entering them.  Wear positive pressure
    breathing apparatus  and full protective clothing.  Evacuate area
    endangered by gas.   Do not get water inside container.   Move container
    from fire area if you can do it without risk.  Stay away from ends of
    tanks.   Cool  containers that are exposed to flames with water from the
    side until well after fire is out.  Isolate area until gas has dispersed
    (DOT 1984, Guide  15).

    Unusual  Fire and Explosion Hazards:   When heated to decomposition or
    upon contact  with water or steam, it will product toxic and corrosive
    fumes  of fluorine containing compounds (Sax 1984 p.  513).  Decomposes upon
    heating or on contact with moist air,  forming toxic and corrosive fumes of
    boric  acid and hydrofluoric acid (DASE 1980, p. 216).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Yes  (*ACGIH  1980)
                 Stable:

        Conditions to Avoid:   It hydrolyzes in moist air to form boric
        acid,  hydrofluoric acid, and fluoboric acid (*ACGIH 1980).

    Incompatibility (Materials to Avoid):   Reacts with alkalis and fumes in
    moist  air, producing  particulates which reduce visibility (NIOSH/OSHA
    1978,  p.  50).  Reacts with alkali metals, alkaline earth metals (except
    magnesium), alkyl nitrates, and calcium oxide  (Sax 1984, p. 513).

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it will produce toxic and corrosive fumes of fluorine containing compounds
    (Sax 1984, p. 513).

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:   Not Found

-------
                                            CAS Registry Number:  7637-07-2
                                            Page 3 of 3
                         BORON TRIFLUORIDE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (Hawley 1981, p. 148)
                       Skin:   Yes  (BASE  1980, p. 216)
                       Ingestion:  Yes (*Rumack 1975 to Present)

    Health Hazards  (Acute, Delayed,  and  Chronic):   Highly toxic; may cause
    death or permanent  injury  after very short exposure to small  quantities
    (*Sax 1975).   Substance is irritating to the eyes, the skin,  and the
    respiratory tract  (DASE 1980, p. 216).

    Signs and  Symptoms of Exposure:  Can  cause death by pulmonary edema.
    Contact on the eyes and skin causes redness, pain, and serious  burns.
    Inhalation causes  a sore throat, coughing, and labored breathing (*NRC
    1981;  *Rumack 1975  to  Present; DASE 1980, p. 216).

    Medical Conditions  Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air; call
    emergency medical  care.  If not breathing, give artificial respiration.
    If breathing is difficult, give oxygen.   Remove and isolate contaminated
    clothing and shoes  at  the  site.  In case.of contact with material,
    immediately flush  skin or  eyes with running water for at least  15
    minutes.  Keep victim  quiet and maintain normal body temperature.   Effects
    may be delayed;  keep victim under observation (DOT 1984, Guide  15).


SECTION  VI -- USE INFORMATION

    Catalyst in organic synthesis; production of diborane;  instruments  for
    measuring neutron  intensity; soldering fluxes;  gas brazing (Hawley  1981,
    p. 146), protects  molten magnesium and its alloys from oxidation; and  a
    fumigant (Merck 1983,  p. 187).  Not registered as a pesticide in the U.S.
    (USEPA/Pesticide Index 1985).
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to  be Taken in  Case Material is Released or Spilled)

    Wear proper respiratory protection, eye protection and full protective
    clothing (see Section V above).  Stop leak if you can do it without risk.
    Use water spray to reduce vapor but do not put water on leak or spill
    area.   Small  spills:  flush area with flooding amounts of water.   Large
    spills:   dike far  ahead of spill for later disposal.  Do not get  water
    inside container.   Isolate area until gas has dispersed.  Isolate 320  feet
    in all directions  from spill or leak.  Large spill from a tank:  first
    isolate 670 feet in all directions, then evacuate in a downwind direction
    an area 1.7 miles  wide and 2.6 miles long (DOT 1984, Guide 15).

-------
                                      CAS Registry Number:  7647-01-0
                                      Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31,  1985
                                                    Revision:
CHEMICAL IDENTITY -- HYDROCHLORIC ACID

CAS Registry Number:   7647-01-0

Synonyms:  Anhydrous Hydrochloric Acid; Aqueous Hydrogen Chloride;
Chlorohydric  Acid; Dilute Hydrochloric Acid;  Hydrochloric Acid Gas;
Hydrochloric  Acid, Trimer; Hydrochloride; Hydrogen Chloride; Hydrogen Chloride
Dimer;  Muriatic  Acid; Spirits of Salt

Chemical Formula:  HC1

Molecular  Weight:  36.46


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   Ceiling 5 ppm (7 rag/tn3) (NIOSH/OSHA  1978, p. 110)

    ACGIH TLV:  Ceiling  5 ppm  (ACGIH  1980,  p.  222)

    IDLH:  100  ppm (NIOSH/OSHA 1978,  p.  110)

    Other Limits Recommended:  Not  Found


SECTION  II --, PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  Constant boiling azeotrope with water 227°F, 109°C
    containing 20.22% hydrogen chloride (Merck 1983,  p.  692); -121°F, -85°C
    (gas)  (*Weast 1979)

    Specific Gravity (H20=l):   1.05 at 15°C/4°C for 10.17% weight/weight
    solution  (Merck 1983, p. 692)

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Freezing point  -13.7°F, -25.4°C (39.17% weight/weight
    solution)  (Merck 1983, p.  692); -174.6°F,  -114.8°C  (gas) (*Weast 1979)

    Vapor Density (AIR=1):  1.268  (*Merck 1983)

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:  82.3 g/100 mL at 32°F (gas)  (*Weast 1979)

-------
                                            CAS Registry Number:  7647-01-0
                                            Page 2 of 4
                         HYDROCHLORIC ACID
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Appearance and Odor:  Colorless gas or liquid (*Weast 1979).
    Irritating pungent  odor (*NFPA 1978).  May be colored yellow by traces  of
    iron,  chlorine,  and organic matter (*Merck 1983).
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:  Not combustible (*NFPA 1978)
        LEL:.   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Normal fire fighting procedures  may be  used
    (*NFPA 1978).  Do not get water inside containers.  Move  containers  from
    fire area.   Keep containers that are exposed to the fire  cool with water
    that is sprayed from the side until well after the fire is out (*DOT  1984).

    Special  Fire Fighting Procedures:  Wear self-contained breathing
    apparatus  and full protective clothing ("DOT 1984).  Neutralize  with
    chemically basic substances such as soda ash or slaked lime (*NFPA 1978).

    Unusual Fire and Explosion Hazards:  Fire may produce irritating or
    poisonous  gases.  Containers may explode in heat of fire  (*DOT 1984).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (Weiss 1980,  p.  513)

        Conditions to Avoid:  Avoid heat; at high temperatures it will
        decompose into hydrogen and chlorine (*Encyc Occupat  Health  and  Safety
        1983).

    Incompatibility  (Materials to Avoid):  Mercuric sulfate -- violent
    reaction with gaseous hydrochloric acid at 250°F.  Sodium -- reacts
    vigorously with gaseous hydrochloric acid.  Acetic anhydride,
    2-aminoethanol, ammonium hydroxide, chlorosulfonic acid,  ethylene diamine,
    ethyleneimine, oleum, propiolactone, sodium hydroxide, sulfuric  acid,  and
    vinyl  acetate -- increase in temperature and pressure when mixed with
    hydrochloric acid.  Calcium phosphide -- energetic reaction with
    hydrochloric acid.  Silver perchlorate and carbon tetrachloride  -- when
    mixed  in combination with hydrochloric acid forms a compound that
    detonates  at 105°F  (*NFPA 1978).  Formaldehyde -- when mixed with
    hydrochloric acid forms a human carcinogen (*NRC 1981).

-------
                                            CAS Registry Number:  7647-01-0
                                            Page 3 of 4
                         HYDROCHLORIC ACID
SECTION  IV --  REACTIVITY DATA  (Continued)

    Material reacts  violently with bases and is corrosive with the generation
    of heat.  Reacts with base metals, forming combustible gas (hydrogen).
    Reacts violently with strong oxidants forming toxic gas (chlorine)  (BASE
    1980,  p. 541).

    Hazardous Decomposition or Byproducts:  At high temperatures,  it
    decomposes  into  hydrogen and chlorine (*Encyc Occupat Health and Safety
    1983).

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (*Merck 1983)
                       Skin:   Yes  (*Merck  1983)
                       Ingestion:  Yes (*Merck 1983)

    Health Hazards  (Acute, Delayed,  and Chronic):   Gas  concentrations of 50
    to 100 ppm are tolerable  for 1 hour.  Concentrations of 1,000 to 2,000  ppm
    are dangerous, even for brief exposures.  More severe exposures will
    result in serious  respiratory distress and prolonged exposures will  result
    in death.   Mists of hydrochloric acid are considered less harmful than
    anhydrous hydrochloric acid, because droplets have no dehydrating action
    (»Sax 1975).

    Signs and  Symptoms of Exposure:   Inhalation may cause  coughing and
    choking,  and inflammation and ulceration of the respiratory tract.
    Ingestion causes corrosion of the mucous membranes,  esophagus and stomach;
    nausea; vomiting;  intense thirst and diarrhea.  Concentrated solutions  can
    cause severe burns to  the skin.  Occupational exposures have led to
    dermatitis, photosensitization ("Merck 1983), gastritis, and chronic
    bronchitis (*ACGIH 1980).  Contact may cause burns to skin and eyes.
    Concentrated solutions can cause severe burns and permanent visual damage
    may occur ("Rumack 1975 to Present).

    Medical Conditions Generally Aggravated by Exposure:  Individuals  with
    respiratory problems and  digestive diseases may be adversely affected by
    low level exposures to the gas or mist (*Encyc Occupat Health and Safety
    1983).

-------
                                            CAS Registry Number:  7647-01-0
                                            Page 4 of 4
                         HYDROCHLORIC ACID
SECTION  V -- HEALTH  HAZARD DATA (Continued)

    Emergency and First Aid Procedures:  Move victim to fresh air;  call
    emergency medical  care.   If  not breathing, give artificial respiration.
    If breathing is difficult,•give oxygen.  Remove and isolate contaminated
    clothing and shoes at the site.  In case of contact with material,
    immediately flush  skin or eyes with running water for at least 15
    minutes.   Keep victim quiet  and maintain normal body temperature.  Effects
    may be delayed; keep victim  under observation ("DOT 1984).  If breathing
    is labored, administer humidified 100% oxygen for 30 minutes out  of every
    hour until symptoms  subside.  For oral exposure,  do not induce vomiting  or
    give bicarbonate to  neutralize.  Irrigate the mouth with copious  amounts
    of water.   Dilute  stomach contents by drinking 1-2 large glasses  of water
    or milk (*Rumack 1975 to  Present).
SECTION  VI  --  USE  INFORMATION

    Major  uses  of hydrochloric acid include refining metal ore,  lab reagent,
    and removing scale  from boilers (*Merck 1983).   It is also a metal
    treating  agent;  it  is used in food processing,  and to neutralize waste
    streams  (*Hawley 1981).  It is used in the manufacture of fertilizers  and
    dyes,  in  electroplating, in the textile industry, and in the rubber
    industry  (-Encyc Occupat Safety and Health 1983).


SECTION  VII --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to  be  Taken in Case Material is Released or Spilled)

    If a spill  or leak  from a small drum or container or a small leak from a
    tank occurs,  then isolate area in excess of 190 feet in all  directions.
    If a large  spill from a large tank or from many drums occurs, isolate  an
    area with a radius  of 450 feet.  In the downwind direction•,  evacuate an
    area 1.0  miles wide and 1.4 miles long.  Keep unnecessary people away  and
    stay upwind.   Stay  out of low areas.  Ventilate closed areas before
    entering  them.   Wear positive pressure breathing apparatus and full
    protective  clothing.  Use water spray to reduce vapor from leak.  For
    small  spills, flush area with flooding amounts of water.  For larger
    spills, dike far ahead of spill for later disposal.   Do not  get water
    inside containers ("DOT 1984).  Spilled material can be neutralized with
    powdered  limestone,  slaked lime, soda ash, or sodium bicarbonate (*CHRIS
    1978).

-------
                                      CAS Registry Number:  7664-39-3
                                      Page 1  of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- HYDROGEN  FLUORIDE

CAS Registry Number:   7664-39-3

Synonyms:  Hydrofluoric Acid; Anhydrous Hydrofluoric Acid; Antisal 2B;
Fluorhydric  Acid; Hydrofluoric Acid Gas;  Hydrofluoric Acid,  Anhydrous (DOT)

Chemical Formula:  HF

Molecular  Weight:  20.01


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   TWA 3 ppm (NIOSH/OSHA  1978, p. 112)

    ACGIH TLV:   TWA 3  ppm; STEL 6 ppm (ACGIH 1984, p. 21)

    IDLH:   20 ppm (NIOSH/OSHA 1978,  p.  112)

    Other Limits  Recommended:   NIOSH  recommended standard  2.5 mg/m3 TWA
    and 5  mg/m3 15 minute ceiling (NIOSH/OSHA  1978, p.  112)


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  67.1°F, 19.51°C (*Merck 1976)

    Specific Gravity (H  0=1):  0.991  at 19.5°C (Weast 1983, p. B-97)

    Vapor Pressure (mmHg):  400 at 2.5°C (''-Sax 1975)

    Melting  Point:  -118.4°F,  -83.55°C  (*Merck 1976)

    Vapor Density (AIR=1):   0.7  (Weiss  1980, p. 515)

    Evaporation Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Very soluble (*Merck  1976)

    Appearance and Odor:   Colorless,  fuming  liquid or gas  with a strong,
    irritating odor (NIOSH/OSHA 1978, p.  112).

-------
                                      CAS Registry Number:   7664-39-3
                                      Page 2 of 4
                         HYDROGEN FLUORIDE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Flammable (Weiss  1980, p. 515)
    Flammable Limits:
        LEL:  Non-Flammable (*Encyc Occupat  Health and Safety 1976)
        DEL:   Non-Flammable (*Encyc Occupat  Health and Safety 1976)

    Extinguishing Methods:  Use water on fires  in which hydrofluoric acid
    is involved (*NFPA 1978).

    Special  Fire Fighting Procedures:  Not Found

    Unusual Fire and Explosion Hazards:  When heated,  it emits  highly
    corrosive  fumes of fluorides (*Sax 1975).  Its  corrosive  action on metals
    can result in formation of hydrogen in containers and  piping to create
    fire hazard (*Encyc Occupat Health and Safety 1971).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:   Yes (Weiss 1980,  p. 515)

        Conditions to Avoid:  May generate flammable hydrogen gas  in
        contact with some metals (Weiss 1980, p.  515)

    Incompatibility (Materials to Avoid):   Will attack glass,  concrete, and
    certain  metals, especially those containing silica, such  as cast iron.
    Will attack natural rubber, leather,  and many organic  materials (Weiss
    1980,  p. 515).

    Hazardous  Decomposition or Byproducts:   Toxic  and irritating vapors are
    generated  when heated  (Weiss 1980, p. 515).

    Hazardous  Polymerization:  May Occur:   Not Found
                               May Not  Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (*NRC 1981)
                      Skin:  Yes  (*Clayton and Clayton 1981-82)
                      Ingestion:   Yes ("Gosselin 1976)

-------
                                      CAS Registry Number:  7664-39-3
                                      Page 3 of 4
                          HYDROGEN FLUORIDE
SECTION  V -- HEALTH HAZARD DATA (Continued)

    Health Hazards (Acute, Delayed, and Chronic):   Ingestion of an
    estimated 1.5 grams produced sudden death without gross pathological
    damage.   Repeated ingestion  of  small amounts resulted in moderately
    advanced hardening of  the bones  ("Gosselin 1976).  Contact of skin with
    anhydrous liquid  produces severe burns  (^Clayton and Clayton 1981-82).
    Inhalation of anhydrous hydrogen fluoride or hydrogen fluoride mist or
    vapors can cause  severe respiratory tract irritation that may be fatal
    (-NRC L981).

    Signs and  Symptoms of Exposure:   External  contact with the  liquid or
    vapor causes  severe irritation  of eyes  and eyelids which may result in
    prolonged or  permanent visual defects or total destruction of eyes.  Skin
    contact may result in  severe burns.  Inhalation causes extreme irritation
    of the respiratory tract.  Ingestion causes necrosis of the esophagus and
    stomach with  nausea, vomiting,  diarrhea, circulatory collapse, and death
    (-Merck 1976).

    Medical  Conditions Generally Aggravated by  Exposure:  Not Found

    Emergency and First Aid  Procedures:   Oral exposure:   dilute with 1 or 2
    glasses of water  or milk without delay.  Do not induce vomiting.  Patient
    should be observed and evaluated for internal burns.  Eye exposure:
    irrigate copiously with water for at least 15 minutes.  Dermal exposure:
    wash area with soap and water.  Treatment should include recommendations
    listed in oral exposure section when appropriate.  Inhalation:  remove
    patient to fresh  air,  monitor for respiratory distress.  If cough or
    difficulty in breathing develops, evaluate for respiratory tract
    irritation, bronchitis and pneumonia (*Rumack 1975 to Present).
SECTION  VI -- USE  INFORMATION

    Removing efflorescence  from brick and stone, or sand particles from
    metallic castings;  working over too heavily weighted silks; cleaning cast
    iron,  copper,  brass;  polishing crystal glass; decomposition of cellulose;
    enameling and  galvanizing iron; increasing porosity of ceramics; in
    fluorination processes,  especially in the aluminum industry; manufacture
    of fluorides;  separating uranium isotopes; in making fluoride containing
    plastics; in dye  chemistry  (*Merck 1976).

-------
                                      CAS Registry Number:  7664-39-3
                                      Page 4  of 4
                          HYDROGEN FLUORIDE
SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to  be Taken in  Case Material is Released or Spilled)

    Ventilate area of  spill or leak to disperse gas.  If in gaseous form,  stop
    flow of gas.   If source of leak is cylinder and leak cannot be stopped,
    remove to safe place  in open air and repair leak or allow cylinder to
    empty.  If in liquid  form, allow to vaporize and disperse the gas
    (*NIOSH/OSHA  1981).   Wear long rubber gauntlets, long rubber aprons, high
    rubber boots  and wide plastic face shield.  Forced-air face masks should
    be worn if air concentration is sufficiently high to cause nasal
    irritation (*Dreisbach 1977).  In case of a spill or leak of anhydrous
    hydrogen floride from a drum or smaller container or a small leak from a
    tank,  isolate 150  feet in all directions.  In case of a large spill,  first
    isolate 300 feet in all directions, then evacuate in a downwind direction
    an area 0.7 miles  wide and 1.1 miles long (DOT 1984, Table of Isolation
    and Evacuation Distances).

-------
                                      CAS Registry Number:  7664-41-7
                                      Page 3 of 4
                              AMMONIA
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (Weiss  1980, p. 73)
                       Skin:   Yes  (Weiss  1980,  p.  73)
                       Ingestion:  Yes  (*Sax 1975)

    Health Hazards  (Acute, Delayed, and Chronic):  Vapors cause irritation
    of eyes and respiratory tract  (*Gosselin 1976).  Liquid will burn skin and
    eyes (-CHRIS 1978).   Poisonous; may be fatal  if inhaled.  Contact may
    cause burns to skin and eyes.  Contact with liquid may cause frostbite
    (DOT 1984, Guide 15).

    Signs and Symptoms of Exposure:   Vapors  cause irritation  of  the eye  and
    respiratory tract.   High  concentrations cause  conjunctivitis,  laryngitis
    and pulmonary edema,  possibly  accompanied by  a feeling of suffocation.
    Contact with the skin causes burns  and blistering.  If absorption becomes
    extensive, coma may arise preceded by convulsions (*Gosselin 1976).
    Ammonia has a greater tendency than other  alkalies to penetrate and damage
    the eye,  and to cause cataracts  (*Grant 1974).

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Move victim to fresh air; call
    emergency medical care.   If not breathing,  give artificial respiration.
    If breathing is difficult, give oxygen.  Remove and isolate contaminated
    clothing and shoes  at the site.  In case of contact with material,
    immediately flush skin or eyes with running water for at least 15
    minutes.   Keep victim quiet and maintain normal body temperature.  Effects
    may be delayed; keep victim under observation  (DOT 1984, Guide 15).   Do
    not rub affected areas (Weiss  1980, p. 43).


SECTION  VI  -- USE INFORMATION

    Twenty-five percent used  as a  direct application fertilizer; intermediate
    uses include 10% used to  make  urea  fertilizer;  19% for ammonium nitrate
    fertilizer; 18% for all other  fertilizers;  4% for ammonium nitrate-based
    commercial explosives; 7% for  major fiber  and  plastic intermediates, and
    14% for all other applications (*SRI).  Also  used as a bactericide (USEPA/
    Pesticide Index 1985).

-------
                                      CAS Registry Number:  7664-41-7
                                      Page 4 of 4
                             AMMONIA
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or Spilled)

    Ventilate area  of spill or leak to disperse gas.   If in  gaseous  form  stop
    flow of gas.  If source of leak is a cylinder and leak cannot be stopped
    in place,  remove leaking cylinder to safe place in open  air and  repair
    leak or allow cylinder to empty.  If in liquid form allow to vaporize
    (*NIOSH/OSHA  1981).  Keep unnecessary people away; isolate hazard area  and
    deny entry.   Stay upwind; keep out of low areas.   Ventilate closed spaces
    before entering them.  Wear positive pressure breathing  apparatus and full
    protective clothing.  Evacuate area endangered by gas (DOT 1984, Guide  15).
    In case of a  spill or leak from a drum or smaller container or a small
    leak from a tank, isolate 80 feet in all directions.  In case of a large
    spill  from a  tank or many containers, first isolate 160  feet in  all
    directions, then evacuate in a downwind direction an area 0.4 miles wide
    and 0.6 miles long (DOT 1984, Table of Isolation and Evacuation  Distances).

-------
                                      CAS Registry Number:  7664-41-7
                                      Page 1  of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October  31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- AMMONIA

CAS Registry Number:   7664-41-7

Synonyms:  AM-FOL;  Ammonia Gas; Ammonia,  Anhydrous; Nitro-Sil; R 717;
Spirit of Hartshorn; Liquid Ammonia

Chemical Formula:  H N

Molecular Weight:  17.03


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Air:  TWA 50 ppm (*NIOSH/RTECS 1985)

    ACGIH TLV:   TWA 25 ppm  (18 tng/m3);  STEL 35 ppm (27 mg/m3) (*ACGIH
    1983)

    IDLH:  500 ppm (NIOSH/OSHA  1978, p. 44)

    Other Limits  Recommended:   Short-term inhalation  limits:  50 ppm for 5
    minutes  (*CHRIS 1978)


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  -28.03°F,  -33.35°C (-Merck 1976)

    Specific Gravity (H20=l):  Liquid 0.6818 at -33.35°C (Merck 1983, p.
    74)

    Vapor Pressure (mmHg):  400 at -45.4°C (*Weast 1983)

    Melting Point:  -107.9°F,  -77.7°C (*Merck 1976)

    Vapor Density (AIR=1):   0.6 (Weiss 1980, p. 73)

    Evaporation  Rate  (Butyl acetate=l):   Not  Found

    Solubility in Water:   31 g/100 g at 25°C (*Merck 1983)

    Appearance and  Odor:  Colorless gas,  liquid (*Weast  1979);  sharp,
    cloying,  repellant odor ("Booth 1982)

-------
                                      CAS Registry Number:  7664-41-7
                                      Page 2  of 4
                             AMMONIA
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:   16% (*NFPA 1978)
        UEL:   25% (*NFPA 1978)

    Extinguishing Methods:  Small fires:  dry chemical or carbon dioxide.
    Large  fires:  water spray, fog or foam.  Apply water gently to the
    surface.   Do not get water inside container.   Move container from fire
    area if you can do it without risk.  Stay away from ends of tanks.  Cool
    containers that are exposed to flames with water from the side until well
    after  fire is out.  Isolate area until gas has dispersed (DOT 1984,  Guide
    15).

    Special Fire Fighting  Procedures:  Wear positive pressure breathing
    apparatus  and full protective clothing (*DOT 1984).

    Unusual Fire and Explosion Hazards:   Mixing of  ammonia with several
    chemicals  can cause severe fire hazards and/or explosions ("Bretherick
    1979;  *NFPA 1978; *Merck 1983).  Ammonia in container may explode in heat
    of fire (*DOT 1984).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (Weiss 1980, p. 73)

        Conditions  to Avoid:  Mixing with other  chemicals and water
        (^Bretherick  1979).

    Incompatibility  (Materials to Avoid):  Incompatible with many materials
    including silver  and gold salts, halogens, alkali metals, nitrogen
    trichloride,  potassium chlorate, chromyl chloride, oxygen halides, acid
    vapors,  azides, ethylene oxide ("Bretherick  1979), picric acid
    (^Environment Canada 1981), and many other chemicals (*NFPA 1978).

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:
                               May Not Occur:  Yes  (Weiss  1980, p.  73)

        Conditions  to Avoid:  Not Found

-------
                                     CAS Registry Number:   7664-93-9
                                     Page 1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- SULFURIC ACID

CAS Registry Number:  7664-93-9

Synonyms:  Battery  Acid; BOV; Chamber Acid; Dipping Acid;  Fertilizer Acid;
Nordhausen Acid; Oil of Vitriol;  Spirit of Sulfur;  Sulphuric Acid; Vitriol
Brown Oil;  Hydrogen Sulfate;  Matting Acid; Spent Sulfuric Acid

Chemical Formula:   H0SO.
                    2   4
Molecular Weight:  98.08 (-Merck  1983)


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  1 tng/m3 (*NIOSH/OSHA  1978)

    ACGIH TLV:   TWA  1 mg/m3 (*ACGIH  1983)

    IDLH:  80 mg/m3 (*NIOSH/OSHA 1978)

    Other Limits Recommended:  Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  554°F, 290°C (*Merck 1983)

    Specific Gravity (H20=l):  1.841 (*Weast  1984)

    Vapor Pressure (mmHg):   1 at 146°C (*Patty 1963)

    Melting Point:   50.65°F,  10.36°C (*Weast  1984)

    Vapor Density (AIR=1):   3.4  (*NIOSH/OSHA 1981)

    Evaporation Rate (Butyl acetate=l):   Not Found

    Solubility in Water:  Soluble  (*Encyc Occupat Health and Safety 1983)

-------
                                       CAS Registry Number:  7664-93-9
                                       Page 2 of 4
                             SULFURIC ACID
SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Appearance and Odor:   Clear,  colorless, oily liquid when pure;  brownish
    when impure (*Encyc Occupat  Health and Safety 1983).  Spent sulfuric  acid
    is a black oily liquid  (-Student  1981); odorless (-Merck 1983);  choking
    odor when hot (*CHRIS 1978).
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Not flammable (Weiss 1980,  p.  842).   For  small
    fires  use dry chemical  or  carbon dioxide.  Use water on combustibles
    burning in vicinity of  this material  (*NFPA  1978).  For large fires  flood
    fire area with water  from  a distance.  Do not get solid streams of water
    on material.   Move container from area if you can do so without risk  (*DOT
    1984).

    Special  Fire Fighting Procedures:  Fight fire from safe distance or
    from protected location.   Use care as water applied directly to this  acid
    results in evolution  of heat and causes spattering ("-NFPA 1978).   Cool
    containers that  are exposed to flames with streams of water until  fire  is
    out.   Wear positive pressure breathing apparatus and special protective
    clothing (-DOT 1984).

    Unusual  Fire and Explosion Hazards:   It  is  highly reactive and capable
    of igniting finely-divided combustible materials on contact (*NFPA 1978).
    When heated,  it  emits highly toxic fumes (*Sax 1975).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes  (Weiss 1980, p.  842)

        Conditions to Avoid:   Can undergo violent chemical change at
        elevated  temperatures  and pressure.  May react violently with  water
        (*NFPA 1978).  When heated, it emits highly toxic fumes (*Sax  1975).

    Incompatibility  (Materials  to Avoid):  Avoid heat; water (-NFPA 1978);
    and organic materials  ('vEncyc Occupat Health and Safety 1983).   Sulfuric
    acid is explosive or  incompatible with an enormous array of substances
    (*NFPA 1978;  *Bretherick 1979; *Sax 1975; *ITI 1982).

-------
                                      CAS Registry Number:  7664-93-9
                                      Page 3 of 4
                             SULFURIC ACID


SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Decomposition  or Byproducts:  Not Found

    Hazardous Polymerization:  May Occur:
                               May Not Occur:  Yes  (Weiss 1980, p. 842)

        Conditions  to Avoid:   Not  Found
                                         *

SECTION  V --  HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (*Merck 1983)
                      Skin:   Yes  (*Merck 1983)
                      Ingestion:   Yes (*DOT 1984)

    Health Hazards  (Acute, Delayed,  and Chronic):   Corrosive to  all body
    tissues.   Inhalation of vapor  may cause serious lung damage.   Contact with
    eyes may result in total  loss  of vision.  Skin contact may  produce  severe
    necrosis (*Merck 1983).   Fatal amount for adult:  between 1 teaspoonful
    and one-half ounce of  the concentrated chemical.  Even a few drops  may be
    fatal  if the acid gains access to the trachea (*Arena 1974).   Chronic
    exposure may cause tracheobronchitis, stomatitis,  conjunctivitis, and
    gastritis (*ACGIH 1980).   Gastric perforation and peritonitis may occur
    and may be followed by circulatory collapse.  Circulatory shock is  often
    the immediate cause of death  (*Gosselin 1984).

    Signs  and Symptoms of Exposure:  Contact  causes corrosion of mucous
    membranes of mouth, throat, and esophagus with immediate pain and
    difficulty in swallowing.  Damaged tissue is greyish white, soon to be
    black, shrunken and wrinkled;  epigastric pain,  nausea and vomiting,  and
    gastric hemorrage also result.  Vomit may contain fresh blood;  and  victims
    complain of  profound thirst.   Clammy skin, weak and rapid pulse, shallow
    respiration  and scanty urine are caused by exposure (*Gosselin 1984).

    Medical Conditions Generally Aggravated by Exposure:  Those with
    chronic respiratory, gastrointestinal, or nervous diseases  and any  eye and
    skin diseases are at greater risk (*Encyc Occupat Health and Safety 1983).

    Emergency and  First Aid  Procedures:  Move victim to fresh air; call
    emergency medical care.   If not breathing, give artificial  respiration.
    If breathing is difficult; give oxygen.   If contact with material occurs,
    flush  skin or eyes with running water for at least 15 minutes.   Remove and
    isolate contaminated clothing  and shoes at the site.  Keep  victim quiet
    and maintain normal body  temperature.  Effects may be delayed;  keep victim
    under  observation (-DOT 1984).

-------
                                       CAS  Registry Number:   7664-93-9
                                       Page 4 of 4
                             SULFURIC  ACID
SECTION  VI -- USE  INFORMATION

    Used in the manufacture of dyestuffs;  acids;  parchment paper; glue;
    petroleum purification ("Merck 1983);  electroplating baths; non-ferrous
    metallurgy; production of pigments,  rayon,  film,  laboratory reagents,
    etchant (*Hawley  1981), and herbicides  (*Spencer  1982); dehydrating agent
    for ethers, esters,  and gases;  refining mineral and vegetable oils;
    leather industry  ("'Encyc Occupat  Health and Safety 1983); chemical
    intermediate for  fertilizers;  agent  in  production of alcohols and
    explosives; iron  and steel pickling;  and storage  batteries (*ACGIH 1980).
SECTION  VII  --  PRECAUTIONS  FOR  SAFE  HANDLING AND USE
(Steps to be Taken in Case Material  is  Released  or  Spilled)

    Extremely hazardous to health;  areas  may  be  entered with  extreme care.
    Wear full protective clothing including self-contained breathing
    apparatus, coat,  pants,  gloves,  boots,  bands around arms,  legs, and
    waist.  No skin surface should be exposed (*NFPA  1978).   Keep all sources
    of ignition away from containers  because  explosive mixtures of hydrogen
    may be produced during storage.   Small  spills:  cover area with sodium
    bicarbonate or soda ash/slaked lime.  Shovel neutralized  residues into
    containers for disposal,  or  (if  not available)  cover area with sand or
    earth and shovel  into disposal containers ("Environment Canada 1984).
    Other neutralizing agents are calcinated  dolomite, calcium oxide and
    hydroxide, sodium carbonate.   Place sulfuric acid absorbed in vermiculate
    in sealed containers ("NIOSH/OSHA 1981).   Spill or leak from small
    containers:  isolate 280  feet in all  directions.  Spill or leak from  large
    containers:  isolate 580  feet in all  directions;  in downwind direction,
    isolate an area of 1.5 miles  wide,  2.2  miles long.  Keep  unnecessary
    people away;  isolate hazard  area and  deny entry.  Stay upwind; keep out of
    low areas.  Ventilate closed  spaces before entering them.  Notify proper
    authorities in case of water  pollution.   Do  not touch spilled material.
    Use water spray to reduce vapor;  do not get  water inside  container.   Dike
    for later disposal (*DOT  1984).

-------
                                      CAS  Registry Number:  7697-37-2
                                      Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- NITRIC ACID

CAS Registry Number:   7697-37-2

Synonyms:  Aqua Fortis; Azotic Acid; Engraver's Acid; Hydrogen Nitrate;
Nital;  Nitric Acid  (Red Fuming);  Nitrous  Fumes;  Nitryl Hydroxide;  Red Fuming
Nitric  Acid;  Nitric Acid (White Fuming)

Chemical Formula:  HNCL

Molecular  Weight:  63.01


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   TWA 2 ppm (*NIOSH/RTECS  1985)

    ACGIH TLV:  TWA  2 ppm, 5 mg/m3; STEL 4 ppm,  10  mg/m3  (*ACGIH 1984)

    IDLH:  100  ppm (NIOSH/OSHA 1978,  p.  138)

    Other Limits Recommended:   Not  Found


SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  181°F;  83°C (*Weast 1979); 248.9°F, 120.5°C for
    constant  boiling acid at 68% nitric acid (Merck 1983, p. 943)

    Specific Gravity (H 0=1):   1.5027  at 25°C/4°C (*Weast 1979); 1.4134

    at  20°C/4°C  for 70% nitric acid (Merck  1983, p. 943)

    Vapor Pressure (mmHg):  47.8 at 20°C (*Encyc Occupat Health and  Safety
    1983)

    Melting Point:  -44°F,  -42°C  ('Weast  1979)

    Vapor Density (AIR=1):  Not  Found

    Evaporation  Rate  (Butyl acetate=l):   Not Found

    Solubility in Water:  Soluble in all proportions (-Weast 1979)

-------
                                      CAS Registry Number:  7697-37-2
                                      Page 2 of 4
                             NITRIC ACID
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Appearance and Odor:  Colorless or yellow liquid with acrid odor
    (*Merck 1983;  *CHRIS  1975).
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  Use water spray (NFPA 1984,  pp.  49-67).  Small
    fires:  water, dry chemical, or soda ash.  Large fires:   flood fire area
    with water.   Move container from fire area if you can do so without risk.
    Spray  cooling water on containers that are exposed to flames until  well
    after  fire is out.  For massive fire in cargo area, use unmanned hose
    holder or monitor nozzles; if this is impossible, withdraw from area and
    let fire burn (DOT 1984, Guide 44).

    Special  Fire Fighting Procedures:  Keep unnecessary people away;
    isolate hazard area and deny entry.  Stay upwind; keep out of low areas.
    Ventilate closed spaces before entering them.   Wear positive pressure
    breathing apparatus and special protective clothing (DOT 1984, Guide 44).

    Unusual  Fire and Explosion Hazards:  May give off poisonous oxides of
    nitrogen and acid fumes when heated in fires (*CHRIS 1978).  May ignite
    other  combustible materials.  Reactions with fuels may be violent.   Runoff
    to sewer may create fire or explosion hazard (*DOT 1984).  Noncombustible
    but dangerously reactive with many materials.   Reacts explosively with
    metallic powders, carbides, hydrogen sulfide,  and turpentine.  Increases
    the flammability of combustible organic and readily oxidized materials.
    Can cause ignition of some of these materials (NFPA 1984, p. 49-67).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:
                 Stable:  Yes (*NFPA 1978)

        Conditions to Avoid:  Moisture and heat (»Sax 1979).

    Incompatibility (Materials to Avoid):  Reacts violently with alcohol,
    turpentine,  charcoal, and organic refuse ('"'Merck 1983).   Reacts
    explosively with metallic powders, carbides, and hydrogen sulfide (*NFPA
    1978).  Powerful reducing agents may cause explosion ("Sax 1975).

-------
                                      CAS Registry Number:  7697-37-2
                                      Page 3 of 4
                             NITRIC ACID
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Decomposition or Byproducts:  Will react with water or steam
    to produce heat,  and  toxic and corrosive fumes.  When heated to
    decomposition,  it emits nitrogen oxides and hydrogen nitrate (*Sax 1979).

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Weiss 1980, p. 656)
                      Skin:   Yes  (Weiss  1980, p. 656)
                      Ingestion:  Yes (Weiss 1980,  p. 656)

    Health Hazards  (Acute, Delayed,  and Chronic):   This  compound  is a
    primary irritant,  and  causes burns and ulceration of all tissues  and
    membranes that  it  contacts.  This includes burns to the eyes and  skin by
    contact,  burns  to  the  mouth, throat, esophagus, and stomach by ingestion,
    and the entire  respiratory tract by inhalation.  Circulatory collapse and
    shock is  often  the immediate cause of death ("Gosselin 1984).   The
    approximate minimum  lethal dose is 5 ml for a 150-lb person ("Arena 1979).

    Signs and  Symptoms of Exposure:  This  compound  causes burns and
    ulceration of all  tissues  to which it comes into contact.   Ingestion
    causes burns, stomach  pain, nausea and vomiting.  After a few hours or a
    few days  ruptured  gut  may  occur.  Shock with clammy skin,  weak and  rapid
    pulse, shallow  respiration and scanty urine may occur ("Gosselin  1984).
    Inhalation can  lead  to bronchitis, respiratory tract irritation and
    pneumonia ("Rumack 1975 to Present).

    Medical Conditions Generally Aggravated by Exposure:  Persons with
    skin,  eye or cardiopulmonary disorders are at a greater risk ("Encyc
    Occupat Health  and Safety  1983).

    Emergency and  First Aid  Procedures:  If ingested, do not induce
    vomiting or give bicarbonate to neutralize.  Irrigate the mouth and throat
    with large amounts of  water  and dilute the stomach contents by having the
    victim drink 1-2 large glasses of water or milk.  If contacted, wash the
    skin or eyes with  tap  water  for at least 15 minutes.  Following
    inhalation, remove the victim to fresh air and monitor the patient  for
    respiratory distress.  Administer humidified 100 percent oxygen for 30
    minutes out of  every hour  if necessary (*Rumack 1975 to Present).

-------
                                      CAS Registry Number:  7697-37-2
                                      Page 4 of 4
                             NITRIC ACID
SECTION  VI  --  USE  INFORMATION

    Used in the  manufacture of organic and inorganic nitrates,  many different
    organic chemicals,  dye intermediate, Pharmaceuticals, jewelry and
    explosives  (*SRI;  "Merck  1983; *Encyc Occupat Health and Safety 1983).


SECTION  VII --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    Keep unnecessary  people away.  Isolate the hazard area and deny entry.
    Stay upwind  and keep out  of low areas.  Ventilate closed spaces before
    entering them.  Wear positive pressure breathing apparatus and special
    protective clothing (*DOT 1984).  Ventilate area of spill or leak.   Flush
    with copious quantities of water and neutralize with alkaline material
    (such as  soda ash,  lime,  etc.) (*NIOSH/OSHA 1981).   If a small spill or
    leak,  isolate for 100 feet in all directions.  If a large spill,  first
    isolate 210  feet  in all directions, then isolate downwind an area of 0.5
    miles wide and 0.7  miles  long (*DOT 1984).  Keep combustibles (wood,
    paper, oil,  etc.)  away from spilled material.  Do not touch spilled
    material; stop leak if you can do so without risk.   Use water spray to
    reduce vapors;  do,not get water inside container.  Small spills:   flush
    area with flooding amounts of water.  Large spills:   dike far ahead of
    spill for later disposal  (DOT 1984, Guide 44).

-------
                                      CAS Registry Number:  7719-12-2
                                      Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October  31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- PHOSPHOROUS TRICHLORIDE

CAS Registry Number:   7719-12-2

Synonyms:  Phosphine,  Trichloro-; Phosphorous  Chloride; Phosphorus Chloride
(C1,P2);  Phosphorus Chloride (PCI,);  Trichlorophosphine; Phosphorus
Trichloride

Chemical Formula:  PCI

Molecular Weight:  137.35


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Air:  TWA 0.5 ppm (*NIOSH/RTECS 1985)

    ACGIH TLV:   TWA 0.2  ppm  (1.5 mg/m3);  STEL 0.5 ppm  (3 mg/tn3) (*ACGIH
    1983)

    IDLH:  50 ppm («Encyc Occupat Health and Safety 1983)

    Other Limits  Recommended:  Not  Found


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  169°F,  76°C  (*Merck 1983)

    Specific Gravity (H20=l):   1.574  at 21°C/4°C (*Merck 1983)

    Vapor  Pressure (mmHg):  100 at 21°C  (*Merck 1983)

    Melting Point:  -170°F, -112°C (*Merck 1983)

    Vapor  Density (AIR=1):  4.75 (-Sax 1979)

    Evaporation  Rate  (Butyl acetate=l):   Not  Found

    Solubility in Water:   Decomposes (*Merck 1983)

    Appearance and Odor:  Colorless, clear  fuming liquid (*Merck  1983);
    pungent odor  (*NFPA  1978).

-------
                                      CAS Registry Number:  7719-12-2
                                      Page 2 of 3
                      PHOSPHOROUS TRICHLORIDE
SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  This material will not burn (*NFPA  1978).  Use
    carbon dioxide or dry chemical on fires involving phosphorous  trichloride
    (*Sax  1979).  Do not use water (Weiss 1980, p. 751).

    Special  Fire Fighting Procedures:  Spray cooling water on containers
    that are exposed to  flames until well after fire is out.   Do not  get water
    inside containers (*DOT 1984).

    Unusual Fire and Explosion Hazards:  This material will react violently
    with water (*NFPA 1978), producing heat and toxic and corrosive fumes
    ("Sax  1979).  When heated to  decomposition, it emits highly  toxic fumes  of
    chlorides  and phosphorus oxides  (*Sax 1979).   It may ignite  other
    combustible materials ("DOT 1984).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:   Yes  (*NFPA  1978)
                 Stable:

        Conditions  to Avoid:   Contact with water, steam, or acids (-Sax
        1979).

    Incompatibility  (Materials  to Avoid):  Reacts violently with water.
    Reacts explosively  with acetic acid, aluminum, chromyl chloride,
    diallylphosphite and allyl alcohol, dimethyl sulfoxide, fluorine,
    hydroxylamine,  iodine  monochloride, lead dioxide, nitric acid,  nitrous
    acid,  organic matter,  potassium, and sodium (*NFPA 1978).

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it emits toxic  fumes of chlorides and phosphorus oxides (*Sax 1979).

    Hazardous Polymerization:  May Occur:
                               May Not Occur:   Yes  (Weiss 1980, p. 751)

        Conditions  to Avoid:   Not Found

-------
                                      CAS Registry Number:  7719-12-2
                                      Page 3 of 3
                      PHOSPHOROUS TRICHLORIDE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (*Sax 1979)
                       Skin:   Yes  (*Sax  1979)
                       Ingestion:  Yes (*Sax 1979)

    Health Hazards  (Acute, Delayed,  and Chronic):  This  material  is highly
    toxic; it may cause death  or permanent injury.  Contact is highly
    irritating to the  skin, eyes,  and mucous membranes, and the material is  an
    irritant through oral  and  inhalation exposure (*Sax 1979).

    Signs and  Symptoms of Exposure:  Exposure may cause dizziness,
    headache, anorexia, respiratory difficulties, nausea and vomiting, and
    swelling.  It can  also cause liver and lung disturbances (*Rumack 1975 to
    Present).  Occupational exposure has caused coughs, bronchitis,  pneumonia,
    and conjunctivitis (*ACGIH 1980).

    Medical  Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air;  call
    emergency medical  care.  If not breathing, give artificial respiration.
    If breathing is  difficult,  give oxygen.  In case of contact with material,
    immediately flush  skin or  eyes with running water for at least 15
    minutes.   Speed  in removing material from skin  is of extreme importance.
    Remove and isolate contaminated clothing and shoes at the site.   Keep
    victim quiet and maintain  normal body temperature (*DOT 1984).  Do not
    induce vomiting  (*Rumack 1975  to Present).


SECTION  VI  -- USE INFORMATION

    This material is used  as a chemical intermediate for phosphorus
    oxychloride, surfactants,  and  stabilizers ("SRI).  It is also  used as an
    intermediate for organophosphorus pesticides and for a number  of other
    applications (*Hawley  1981).


SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be Taken in  Case Material is Released or  Spilled)

    In case of a small spill or leak, isolate 110 feet in all directions.  For
    a large spill, first isolate 220 feet in all directions, then evacuate in
    a downwind direction an area 0.5 miles wide and 0.8 miles long (*DOT
    1984).  Respiratory protection (supplied-air respirator with
    self-contained breathing apparatus) should be worn (*Encyc Occupat Health
    and Safety 1983).   Do  not  get  water into containers.  Do not touch spilled
    material.  Use water spray to  reduce vapors, but do not put water on leak
    or spill area.  Keep combustibles away from spilled material.   Dike spills
    for later disposal (*DOT 1984).

-------
                                           CAS Registry Number:   7722-84-1
                                           Page 1 of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- HYDROGEN  PEROXIDE

CAS Registry Number:   7722-84-1

Synonyms:  Albone;  Albone DS; Hydrogen Dioxide; Hydrogen Dioxide Solution;
Hydroperoxide;  Inhibine; Perhydrol; Peroxaan; Superoxol;  T-Stuff

Chemical Formula:  HO

Molecular  Weight:  34.02


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   TWA 1 ppm (1.5 mg/m3)  (*NIOSH 1979)

    ACGIH TLV:   TWA 1  ppm  (1.5 mg/m3); STEL 2 ppm  (3 mg/m3) (*ACGIH
    1980)

    IDLH:  75 ppm (NIOSH/OSHA 1978, p.  112)

    Other Limits  Recommended:   Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  306°F, 152°C  (''-Merck 1976)

    Specific Gravity (H20=l):   1.463 at 0°C (*Merck 1976)

    Vapor Pressure  (mmHg):   Not Found

    Melting Point:  31°F, -0.43°C  (''-Merck 1976)

    Vapor Density (AIR=1):   Not Found

    Evaporation Rate (Butyl  acetate=l):  Not Found

    Solubility in Water:   Miscible with  water  (''-Merck 1976)

    Appearance and  Odor:  Colorless  liquid  (Merck 1983, p.  697).  It is
    odorless  or has  an odor resembling  ozone  ('V0sol 1975).

-------
                                            CAS Registry Number:   7722-84-1
                                            Page 2 of 4
                         HYDROGEN  PEROXIDE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:  Not  Combustible  (NIOSH/OSHA 1978, p. 112)
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Fire involving hydrogen peroxide should be
    fought with water, since  the use  of  chemicals may accelerate decomposition
    (-Encyc Occupat  Health  and  Safety 1971).

    Special  Fire Fighting Procedures:  Avoid breathing vapors.  Keep
    upwind.   Wear respiratory protection if material is misting.  Wear boots,
    protective gloves  and goggles.  Do not handle broken packages without
    protective equipment  (Student 1981,  p. 282).

    Unusual  Fire and Explosion Hazards:  Hydrogen peroxide  is  not  a
    flammable substance,  but  if high  concentrations are allowed to contact
    combustible materials,  spontaneous ignition may occur.  In addition, the
    oxygen released  in decomposition  will promote combustion.  Vapor
    concentrations greater  than 40 percent by weight can be decomposed
    explosively at one atmosphere pressure ("Encyc Occupat Health and Safety
    1971).  When highly concentrated  or  pure hydrogen peroxide is exposed to
    heat,  mechanical impact,  or decomposing catalysts, such as metals and
    their  salts, dusts and  alkalies,  severe explosion hazard may occur
    (-Martin 1978).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:   Yes  (*Merck 1976)
                 Stable:

        Conditions  to Avoid:   Avoid  contact with  combustible materials.
        Avoid contamination  from  dust, metal, etc. as such contamination may
        lead to  rapid decomposition  ("Merck 1976).

    Incompatibility  (Materials  to  Avoid):  Avoid contact with combustible
    materials ("Merck 1976)  and keep  away from heat and sunlight (*ASHP).
    Powerful oxidizer (NIOSH/OSHA 1978, p. 112).

    Hazardous Decomposition or Byproducts:  Solutions of hydrogen peroxide
    in concentration in excess of 65  percent by weight heat up spontaneously,
    decomposing  to  water  and oxygen.  For 90 percent concentration solutions,
    hydrogen peroxide can be decomposed due to the introduction of a catalytic
    decomposition agent.   It can  get  quite hot and perhaps start fire (*Sax
    1979).

-------
                                            CAS Registry Number:  7722-84-1
                                            Page 3  of 4
                         HYDROGEN PEROXIDE
SECTION  IV -- REACTIVITY DATA  (Continued)

    Hazardous  Polymerization:   May Occur:
                               May Not Occur:   Yes  (*Merck  1976)

        Conditions to Avoid:   Hydrogen  peroxide decomposes in water ("Merck
        1976)
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (-DOT 1984)
                       Skin:   Yes  (-Rumack  1975 to Present)
                       Ingestion:  Yes  (-Gosselin 1976)

    Health Hazards  (Acute, Delayed,  and Chronic):   Solutions  exceeding 27.5
    percent by weight  of hydrogen peroxide may cause irritation, or eye injury
    (-Rurnack 1975 to Present).   If inhaled, may be harmful (-DOT 1984).

    Signs and  Symptoms of Exposure:   Hydrogen peroxide  solutions can cause
    congestion and irritation  of mucous membranes (*Arena 1979).  Large doses
    may produce esophagitis and  gastritis (*Gosselin 1976).  Brief contact
    with skin usually  results  in a burning sensation and temporary bleaching
    effect.  Longer contact will cause  blistering ("''Encyc Occupat Health and
    Safety 1971).  Inhalation  of 7 ppm  hydrogen peroxide causes lung
    irritation (*Thienes 1972).

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air;  call
    emergency medical  care.  Remove and isolate contaminated clothing and
    shoes  at the site.   In case  of contact with material, immediately flush
    skin or eyes with  running  water for at least 15 minutes.   Keep victim
    quiet  and maintain normal  body temperature (''-DOT 1984) .

    For inhalation exposure, remove patient to uncontaminated atmosphere.
    Establish respiration.  For  skin contact, wash exposed areas and observe
    for subsequent irritation.   For eye contact, irrigate eyes thoroughly with
    water  for 15 minutes and refer for  ophthalmologic examination.  For
    ingestion, dilute  with water (*Rumack 1975 to Present).

-------
                                            CAS Registry Number:  7722-84-1
                                            Page 4 of 4
                         HYDROGEN PEROXIDE
SECTION  VI  --  USE  INFORMATION

    Anti-infective; bleach; pharmaceutical preparations; source of oxygen in
    respiratory  protective equipment; chemical intermediates; and rocket
    propulsion (*Merck  1976; *Encyc Occupat Health and Safety 1971; *SRI).

    Bleaching and deodorizing of textiles, wood pulp, hair, fur, etc;  source
    of organic and inorganic peroxides; pulp and paper industry; plasticizers;
    rocket fuel;  foam rubber; manufacture of glycerol; antichlor; dyeing;
    electroplating; antiseptic; laboratory reagent; epoxidation;
    hydroxylation;  oxidation and reduction; viscosity control for starch  and
    cellulose derivatives; refining and cleaning metals; bleaching and
    oxidizing agent in  foods; neutralizing agent in wine distillation; seed
    disinfectant;  substitute for chlorine in water and sewage treatment
    (Hawley 1981,  p.  545).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be  Taken in Case Material is Released or Spilled)

    (For hydrogen peroxide, stablized, with more than 52 percent peroxide.)
    Keep unnecessary  people away; isolate hazard area and deny entry.   Stay
    upwind; keep out  of low areas.  Wear self-contained (positive pressure if
    available) breathing apparatus and full protective clothing.  Keep
    combustibles  (wood,  paper, oil, etc.) away from spilled material.   Do not
    touch  spilled material; stop leak if you can do so without risk.  Use
    water  spray  to reduce vapors.  Small spills:  flush area with flooding
    amounts of water.   Large spills:  dike spill for later disposal (DOT  1984,
    Guide  47).

-------
                                             CAS  Registry  Number:   7723-14-0
                                             Page 3 of 4
                              PHOSPHORUS
SEECTION IV -- REACTIVITY DATA

    Stability:  Unstable:  Yes  White/Yellow:   Darkens on  exposure to
    light (Merck 1983,  pp.  1059-1060).   Gives  off acrid fumes on exposure to
    air (*NIOSH/OSHA 1981).   Ignites  spontaneously in air at 30°C (Merck 1983,
    pp. 1059-1060).
                 Stable:  Yes.  Black:   stable in air (Merck 1983,  pp.
    1059-1060).

        Conditions to Avoid:   Avoid heat.   Red:  burning  yields toxic
        oxides of phosphorus  (*CHRIS  1978); White/Yellow:  toxic gases and
        vapors such as  phosphoric  acid  fumes are released (*NIOSH/OSHA 1981).

    Incompatibility (Materials to Avoid):  Red:  Avoid uncontrolled
    contact with oxidizing  agents,  or with  strong alkaline hydroxides.  Can
    react violently with oxidizing agent in presence of air and moisture,
    liberating phosphorus acids and toxic,  spontaneously  flammable phosphine
    gas (-CHRIS 1978).   White/Yellow:   Air, all oxidizing agents including
    elemental sulfur, strong  caustics (NIOSH/OSHA 1978, p. 156).

    Hazardous Decomposition  or Byproducts:   Upon heating Red releases toxic
    oxides of phosphorus (*CHRIS 1978)  and  Yellow emits toxic gases and vapors
    such as phosphoric  acid fumes  (-NIOSH/OSHA 1981).

    Hazardous Polymerization:  May Occur:   Not  Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:   Not  Found
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (^NIOSH/OSHA 1981)
                       Skin:   Yes  (*NIOSH/OSHA  1981)
                       Ingestion:  Yes.  Red is not poisonous unless
                                  contaminated with Yellow  (*Gosselin 1976).

    Health Hazards  (Acute, Delayed,  and Chronic):   It  is classified as
    super  toxic.   The probable lethal dose is less than 5 mg/kg (a taste or
    less than 7 drops) for 70  kg (150  Ib.) person  (*Gosselin 1976).  Poisonous
    if swallowed or  if fumes are inhaled  (DOT 1984, Guides 32, 38).  Yellow:
    Fumes  are irritating to the respiratory tract  and cause severe ocular
    irritation.  On  contact with the skin it may ignite and produce severe
    skin burns with  blistering (*NIOSH/OSHA 1981).  Red:  Irritates eyes
    (*DASE 1980).

-------
                                            CAS Registry Number:  7723-14-0
                                            Page 4 of 4
                              PHOSPHORUS
SECTION  V -- HEALTH HAZARD DATA (Continued)

    Signs and Symptoms of Exposure:   Dermal  --  severe burns; ingestion --
    produces a sensation of warmth or a burning pain in the throat and
    abdomen, intense  thirst, nausea, vomiting, diarrhea,  severe abdominal
    pains  and a garlic  odor from breath and excretion products (*Gosselin
    1976).  White phosphorus fumes cause severe ocular irritation ("Grant
    1979).

    Medical  Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:  Move victim to fresh air;  call
    emergency medical care.  If  not breathing, give artificial respiration.
    If breathing is difficult, give oxygen.  In case of contact with  material,
    immediately flush eyes and skin with running water for at least 15
    minutes.  Keep exposed skin  areas immersed in water or covered with wet
    bandages until medical attention is received.   Remove and isolate
    contaminated clothing and shoes at the site and place in metal container
    filled with water -- fire hazard if allowed to dry (DOT 1984, Guides 32,
    38).
SECTION  VI  --  USE  INFORMATION

    Major  uses:   rat  poison;  for smoke screens; gas analysis;  fireworks;
    manufacturing safety matches, phosphoric acid, phosphine,  phosphoric
    anhydride, phosphorus pentachloride, phosphorus trichloride,  fertilizers,
    pesticides,  smoke bombs,  incendiary shells, tracer bullets;  in organic
    synthesis (Merck  1983, pp.  1059-1060).


SECTION  VII --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to  be  Taken in Case Material is Released or Spilled)

    Keep unnecessary  people away; isolate hazard area and deny entry.   Stay
    upwind; keep out  of low areas.  Wear self-contained (positive pressure if
    available) breathing apparatus and full protective clothing (*DOT  1984).

    Red and White:  wear flame-retardant full protective clothing and  dust
    mask (*NFPA  1978  and *CHRIS 1978).  Yellow:  use flame-retardant
    clothing, gloves, face shields and any other appropriate protective
    clothing  to  prevent any possibility of skin contact.  Use dust and
    splash-proof safety goggles.  Any clothing which becomes contaminated
    should be removed immediately (*NIOSH/OSHA 1981).

-------
                                            CAS  Registry  Number:  7723-14-0
                                            Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31,  1985
                                                    Revision:
CHEMICAL IDENTITY -- PHOSPHORUS

CAS Registry Number:   7723-14-0

Synonyms:  Black Phosphorus;  Bonide Blue Death Rat Killer;  Common Sense
Cockroach and Rat  Preparations; Exolit LPKN;  Exolit VPK-n361; Phosphorus
(White);  Phosphorus  (Yellow); Phosphorus (Red);  Phosphorus, White, Molten
(Dry);  Phosphorus-31; Rat-Nip; Red Phosphorus; Violet Phosphorus

Chemical Formula:  P

Molecular Weight:  30.97


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   0.1 mg/m3 (NIOSH/OSHA 1978,  p.  156)

    ACGIH TLV:   TWA  0.1  mg/m3; STEL 0.3 mg/m3  (ACGIH  1985, p.  27)

    IDLH:  Not Found

    Other Limits  Recommended:  Toxicity  information:  LD.   oral (human)

    1.4 mg/kg (*NIOSH/RTECS 1985)


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point: White/Yellow:  536°F, 280°C (*Weast  1979)  (ignites at
    86°F, 30°C in moist air (Merck 1983, p.  1060); Red:  536°F, 280°C
    (ignites  at 500°F, 260°C)  (Merck 1983,  p.  1060)

    Specific Gravity (H.0=l):   Red:  2.34; Violet:  2.36; Black:
                      /
    2.70; White/Yellow:  1.8 at 20°C (*Weast  1979)

    Vapor Pressure  (mmHg):  White/Yellow:   0.026 at  20°C  (-NIOSH/OSHA 1981)

    Melting Point:  White/Yellow:   111.2°F, 44.1°C;  Violet:  1094°F,
    590°C;  Red:   1094°F, 590°C at 43 atm (*Weast 1979)

    Vapor Density (AIR=1):  Red:   4.77; White/Yellow:  4.42 (*Sax 1979)

    Evaporation Rate (Butyl  acetate=l):  Not Found

-------
                                            CAS Registry Number:  7723-14-0
                                            Page 2  of 4
                              PHOSPHORUS
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility in Water:   White/Yellow:   1 part/300,000 parts water.
    Black:   Very  slightly soluble  in cold water, insoluble in hot water
    (*Weast 1979).

    Appearance and Odor:  White/Yellow:  White to yellow, soft, waxy solid
    (*NIOSH/OSHA  1981).   It has  a  garlic-like odor (*Hayes 1983).  Black:
    Polymorphic,  orthorhombic  crystalline form, amorphous form;.  Red:  Red
    to violet powder;  polymorphic  (Merck 1983, pp. 1059-1060).  Violet:
    Violet  monoclinic  (*Weast  1979).
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  White/Yellow:  Ignites spontaneously in
    air at or above 86°F, 30°C  (*NIOSH/OSHA  1981).
    Flammable Limits:  White/Yellow:  Can be ignited under almost all
    normal temperature conditions.  Red:  Material that must be preheated
    before ignition can occur  (*NFPA  1978).
        LEL:  Not Found
        UEL:   Not  Found

    Extinguishing Methods:  Small fires:  dry chemical,  sand,  water spray,
    or foam.   Large fires:  water spray, fog, or foam.  Cool containers that
    are exposed to  flames with water  from the side until well after fire is
    out (DOT 1984,  Guides 32, 38).

    Special Fire Fighting  Procedures:  White/Yellow:  Deluge with water,
    taking care not to scatter-, until fire is extinguished and phosphorus has
    solidified,  then cover  with wet sand or dirt.  Red:  Flood with water and
    when fire is extingushed, cover with wet sand or dirt.  Extreme caution
    should be used  during clean up since reignition may occur.   Under certain
    conditions at high temperature, red phosphorus reverts to more hazardous
    white  phosphorus (*NFPA 1978).

    Unusual  Fire and Explosion Hazards:   It will  ignite  itself  if  exposed
    to air.   Will reignite  itself after fire is extinguished (*DOT 1984).
    White/Yellow:   Ignites  at approximately 86°F, 30°C in air;  ignition
    temperature is  higher when air is dry.  Black:  Does not catch fire
    spontaneously.   Red:  Catches fire when heated in air to approximately
    500°F,  260°C and burns  with formation of the pentoxide.  Burns when heated
    in atmosphere of chlorine.  Caution:  Avoid contact with potassium
    chlorate,  potassium permanganate, peroxides and other oxidizing agents;
    explosions may  result on contact or friction (Merck 1983, pp. 1059-1060).

-------
                                           CAS  Registry Number:  7726-95-6
                                           Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31.  1985
                                                   Revision:
CHEMICAL IDENTITY -- BROMINE

CAS Registry  Number:  7726-95-6

Synonyms:  No Synonyms Found

Chemical Formula:   Br?

Molecular  Weight:  159.81


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Air:  TWA 0.1 ppra (0.7 mg/mj)  (OSHA 1984, p. 661)

    ACGIH TLV:  TWA 0.1 ppm (0.7 mg/m3); STEL 0.3 pptn (2 mg/ms)  (*ACGIH
    1981)

    IDLH:  10 ppm (NIOSH/OSHA 1978,  p. 52)

    Other Limits Recommended:  Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   139.2°F, 59.5°C  (*Merck 1976)

    Specific Gravity (H20=l):  3.1023 at 25/4°C  (*Merck 1976)

    Vapor Pressure  (mmHg):   172  at 20.6°C (*Patty 1963)

    Melting Point:   19.0°F,  -7.25°C (*Merck 1976)

    Vapor Density (AIR=1):   5.51 at 15°C (Hawley  1981, p. 149)

    Evaporation  Rate (Butyl acetate=l):   Not Found

    Solubility  in Water:   3.52 g/100 cc water  at 50°C (*Weast 1979)

    Appearance and  Odor:  Heavy dark reddish-brown liquid or vapor (*Merck
    1976,  *Gosselin  1976,  *NFPA 1978); solid  forms are  also found  (*NRC 1980);
    it has a suffocating odor (*Merck  1976).

-------
                                            CAS Registry Number:  7726-95-6
                                            Page 2 of 4
                              BROMINE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Non flammable, but a strong oxidizer (NFPA
    1984,  p. 49-12).  Extinguish with dry  chemical, carbon dioxide, water
    spray, fog or foam  (DOT 1984,  Guide 59).

    Special  Fire Fighting Procedures:  Wear positive pressure breathing
    apparatus and special protective clothing.  Move containers from fire
    area.   Cool containers  that are exposed to flames with water (DOT 1984,
    Guide  59).

    Unusual Fire and Explosion Hazards:   Will cause  ignition of organic
    materials;  spontaneous  ignition possible when combined with potassium,
    phosphorus  and tin  (*Encyc Occupat Health and Safety 1971) and a wide
    variety of other  chemicals (Sax 1984,  p. 519).  It reacts explosively with
    acetylene,  acrylonitrile, ammonia, dimethyl formamide, ethyl phosphine,
    hydrogen, isobutyrophenone, nickel carbonyl,  nitrogen triiodide, ozone,
    oxygen difluoride,  phosphorus, potassium, silver azide, sodium and sodium
    carbide (*NFPA 1978).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:
                 Stable:  Yes (NFPA 1984, p. 49-21)

        Conditions to Avoid:  Vaporizes  rapidly at room temperature (Merck
        1983, p.  192)

    Incompatibility (Materials to Avoid):   Bromine is incompatible with a
    wide variety of materials including alkali hydroxides; arsenities;
    ferrous, mercurous  salts; hypophosphites and other oxidizable substances
    (Merck 1983,  p. 192).

    Hazardous  Decomposition or Byproducts:  When heated it emits highly
    toxic  fumes and will react with water  or steam to product toxic and
    corrosive fumes (Sax 1980, p.  519).

    Hazardous  Polymerization:   May Occur:  Not  Found
                               May Not Occur:   Not  Found

        Conditions to Avoid:  Not  Found

-------
                                            CAS Registry Number:   7726-95-6
                                            Page 3 of 4
                              BROMINE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (-Sax  1975)
                       Skin:   Yes  (*Encyc  Occupat Health  and Safety  1971)
                       Ingestion:  Yes  (*Sax  1975)

    Health Hazards  (Acute, Delayed,  and Chronic):   Inhalation  exposure to
    11-23  mg/m3  produces  severe  choking.   30-60 mg/m3 is  extremely
    dangerous.   200  mg/m3  is  fatal in a short time.  Vapors can cause acute
    as well as  chronic poisoning.  It has  cumulative properties (*Encyc
    Occupat Health and Safety 1971).  It is irritating to the eyes and
    respiratory tract  (*NFPA  1978).  Poisoning is due to  the corrosive action
    on the gastrointestinal tract.  Nervous,  circulatory  and renal
    disturbances occur after  ingestion.  Ingestion of liquid can cause death
    due to circulatory collapse  and asphyxiation from swelling of the
    respiratory tract  (*Gosselin 1976).  The  lowest oral  lethal dose reported
    for humans  is 14 rag/kg.   The lowest lethal inhalation concentration
    reported for humans is  1000  ppm (-NIOSH/RTECS 1985).

    Signs  and Symptoms of Exposure:   Inhalation:   small amount will  cause
    coughing,  nose bleed,  dizziness, and headache followed by abdominal pain
    and diarrhea and sometimes measles-like eruptions on  trunk and
    extremities.  Skin contact causes pustules and painful nodules in exposed
    areas  of skin; if  not  removed will  cause  deep, painful ulcers.   Ingestion
    (of liquid)  causes burning pain in mouth  and esophagus, lips and mucous
    membranes  stained  brown,  severe gastroenteritis evidenced by abdominal
    pain and diarrhea, rapid  heartbeat, cyanosis, and shock (''"Clayton and
    Clayton 1981-82).   Regular exposure to concentrations approaching the
    permissible exposure  level causes irritability, loss  of appetite, joint
    pains  and dyspepsia.   Other  symptoms include loss of  cornea reflexes,
    inflammation of  the throat,  thyroid dysfunction, cardiovascular  disorders,
    disorders  of digestive  tract (*Encyc Occupat Health and Safety 1971).

    Medical Conditions Generally Aggravated by  Exposure:  Not Found

    Emergency and  First Aid Procedures:  Move victim to fresh air; call
    emergency medical  care.   If  not breathing, give artificial respiration.
    If breathing is  difficult, give oxygen.   In case of contact with material,
    immediately flush  skin  or eyes with running water for at least 15
    minutes.  Remove and  isolate contaminated clothing and shoes at  the site.
    Keep victim quiet  and maintain normal  body temperature.  Effects may be
    delayed; keep victim  under observation (DOT  1984, Guide 59).

-------
                                            CAS Registry Number:  7726-95-6
                                            Page 4 of 4
                              BROMINE
SECTION  VI  --  USE  INFORMATION

    For gold  extraction; military gas; bleaching fibers and silks;  manufacture
    of medicinal bromine compounds, anti-knock compounds (ethylene  bromide)
    for gasoline (*Merck 1976).  For fire-retardant for plastics;  in
    photography; shrink-proofing wool; in organic synthesis; solvents;
    intermediate for  fumigants; fire-extinguishing fluid; and analytical
    reagents  (*Hawley 1977).  Also used as a refrigerant and dehumidifying
    agent  and for swimming pool sanitation and water purification (*SRI).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING  AND  USE
(Steps to  be  Taken in Case Material is Released or Spilled)

    Wear eye  protection  (see  Section V above).  Wear positive pressure
    breathing apparatus and special protective clothing (DOT'1984,  Guide 59).
    Ventilate area of spill or leak.  Collect for reclamation by absorbing it
    in vermiculite, dry sand, earth, or a similar material and disposing.in
    sealed containers in secured sanitary landfill (*NIOSH/OSHA 1981).
    Potassium carbonate, sodium carbonate, sodium bicarbonate, lime, and
    sodium hydroxide  solutions are neutralizing agents for liquid bromine
    spills (*Clayton  and Clayton 1981-82).  Do not touch material,  stop leak
    if possible  without risk.  Use water spray to reduce vapors.  Small
    spills:   absorb with sand or other noncombustible absorbent material and
    place  in  container.  Large spills:  dike spill for later disposal (DOT
    1984,  Guide  59).   In case of a spill or leak from a drum or smaller
    container or a small leak from a tank, isolate for 170 feet in all
    directions.   In case of a- large spill, first isolate for 350 feet in all
    directions,  then  evacuate in a downwind direction an area 0.8 miles wide
    and 1.3 miles long (DOT 1984, Table of Isolation and Evacuation Distances)

-------
                                           CAS Registry Number:  7778-44-1
                                           Page 1 of 3
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31. 1985
                                                   Revision:
CHEMICAL IDENTITY -- CALCIUM ARSENATE

CAS Registry Number:  7778-44-1

Synonyms:  Arsenic  Acid, Calcium Salt (2:3); Calcium Arsenate,  Solid  (DOT);
Calcium Orthoarsenate; Calcium-0-Arsenate; Calciumarsenat; Chip-Cal Granular;
Cucumber Dust; FLAC; KALO; Kilmag; Pencal; Security;  Spra-Cal; Spracal;
Tricalcium Arsenate; Tricalcium Ortho-Arsenate;  Tricalcium-0-Arsenate

Chemical Formula:   As00 *3Ca
                     Z  o
Molecular  Weight:  398.08


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Air:  TWA 10  vg (As)/mJ  (NIOSH/RTECS 1983, Volume 1,
    p.  438)

    ACGIH TLV:   TWA 0.2 mg/m3 (arsenic content) (*ACGIH 1980)

    IDLH:  100 mg/m3 (NIOSH/OSHA 1978, p. 58)

    Other Limits Recommended:  Occupational exposure to inorganic arsenic
    recommended standard --  Ceiling  concentration 0.002  rag/m3/15 minutes,
    air (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H-0=l):   3.620 (^Clayton and Clayton 1981-82)

    Vapor Pressure  (mmHg):  Not Found

    Melting Point:   1455°C (*Weast 1979)

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:   0.13  g/liter  at  77°F,  25°C (*Clayton  and Clayton
    1981-82)

-------
                                           CAS Registry Number:   7778-44-1
                                           Page 2 of 3
                         CALCIUM ARSENATE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Appearance and Odor:  Colorless  (*Weast 1979) or white  powder
    ('^Worthing 1979); odorless (*CHRIS  1978)


SECTION  III -- FIRE AND EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing Methods:   Not  flammable (Weiss 1980,  p. 210)  For small
    fires,  use dry  chemical, water  spray, or foam.  For large fires, use water
    spray,  fog, or  foam (*DOT 1984).

    Special  Fire  Fighting  Procedures:   Stay upwind; keep out  of  low areas.
    Wear self-contained (positive pressure if available) breathing apparatus
    and full protective clothing  ('-DOT  1984).

    Unusual Fire  and Explosion Hazards:   Fire may produce irritating or
    poisonous  gases  (*DOT 1984).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Yes (*Farm  Chemicals Handbook 1981)
                 Stable:

        Conditions to Avoid:  Heat  (-Hawley  1977)

    Incompatibility  (Materials to  Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated to  decomposition,
    calcium arsenate produces toxic fumes of arsenic (Sax 1984,  p. 317).

    Hazardous Polymerization:  May Occur:
                              May Not Occur:   Yes  (Weiss 1980,  p. 210)

        Conditions to Avoid:  Not Found
SECTION V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes  (*DOT 1984)
                      Skin:  Not Found
                      Ingestion:   Yes  (*Gosselin 1976)

-------
                                            CAS Registry Number:  7778-44-1
                                            Page 3 of 3
                          CALCIUM ARSENATE
SECTION V -- HEALTH HAZARD DATA (Continued)

    Health Hazards  (Acute, Delayed, and Chronic):  This  material  is
    extremely toxic; the probable oral lethal dose for humans is 5-50 mg/kg,
    or between 7 drops  and 1  teaspoonful for a 150 Ib. person ("Gosselin
    1976).  It is an irritant to eyes, respiratory tract, mouth and stomach
    (*CHRIS 1978).   Damage to kidneys, liver and the nervous system have been
    reported (*Rumack 1975 to Present).  (Non-Specific -- Arsenic)  Chronic
    exposure can cause  bone marrow  damage, often leading to aplastic anemia.
    There is epidemiological  evidence that chronic ingestion of arsenic
    compounds causes a  predisposition to skin cancers (*Gilman 1980).

    Signs and Symptoms  of Exposure:   Similar to arsenic.  Early symptoms
    include abdominal pain, vomiting, bloody or watery diarrhea, pain in
    extremities  and  muscles,  weakness, flushing of skin,  numbness and tingling
    in extremities,  intense thirst, and muscular cramps.   Kidney failure may
    occur.  Jaundice may appear within an hour (*Rumack 1975 to Present).  In
    severe poisoning, death can occur within an hour, but the usual interval
    is 24 hours  ("Oilman 1980).

    Medical  Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air.   Call
    emergency medical care.   Remove contaminated clothing and shoes.   In case
    of contact with  material,  immediately flush skin or eyes with running
    water for at least  15 minutes (-DOT 1984).
SECTION  VI  --  USE  INFORMATION

    This material  is  used as an insecticide and herbicide (*SRI).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be  Taken in Case Material is Released or Spilled)

    Stay upwind; keep out of low areas.  Wear self-contained (positive
    pressure  if  available) breathing apparatus and full protective clothing.
    Do not touch spilled material.  Take up small solution spills  with sand or
    other noncombustible absorbent material and place into containers  for
    later disposal.   For small dry spills, use clean shovel  to place material
    in clean,  dry  container.  For large spills, dike far ahead of  spill for
    later disposal (*DOT 1984).

-------
                                           CAS Registry Number:  7782-41-4
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- FLUORINE

CAS Registry  Number:  7782-41-4

Synonyms:  Fluorine-19

Chemical Formula:   F

Molecular Weight:  38.0


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Air:  TWA 0.1  ppra  (*NIOSH/RTECS 1985)

    ACGIH TLV:   TWA  1 ppm, 2 tng/ra3;  STEL 2 ppm, 4 mg/m3 (*ACGIH  1984)

    IDLH:  25 ppm (NIOSH/OSHA  1978, p. 104)

    Other Limits Recommended:  Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   -306.6°F, -188.13°C (*Merck  1983)

    Specific Gravity (H20=l):   1.5127 at -306.6°F, -188.13°C (liquid)

    (-Merck 1983)

    Vapor Pressure  (tnmHg):   760  at -306.2°F, -187.9°C  (*Weast 1979)

    Melting Point:   -363.3°F, -219.6°C (*Merck  1983)

    Vapor Density (AIR=1):   1.695  (*Sax 1979)

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility  in Water:  Reacts with water (*Merck 1983)

    Appearance and  Odor:  Pale  yellow to greenish yellow  gas having a
    characteristic pungent odor (*Merck 1983; *Weast 1979).

-------
                                            CAS Registry Number:  7782-41-4
                                            Page 2 of 3
                            FLUORINE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  For small fire, use dry chemical  or  carbon
    dioxide.   For large fire, use water spray, fog, or foam.   For massive  fire
    in cargo area, use unmanned hose holder or monitor nozzles (*DOT 1984).

    Special Fire Fighting  Procedures:  A few whiffs of the gas or vapor
    could  cause death.  Gas, vapor or liquid could be fatal on penetrating the
    firefighters'  normal  full protective clothing.  Only special  protective
    clothing designed to  protect against fluorine should be used; the normal
    full protective  clothing available to the average fire department will not
    provide adequate protection.  Do not direct water onto fluorine leaks  as
    the fire may be  intensified (*NFPA 1978).

    Unusual  Fire and Explosion Hazards:  May  ignite other combustible
    materials (wood, paper, oil, etc.)  Mixture with fuels may explode.
    Container may explode in heat of fire.  Vapor explosion and poison hazard
    indoors,  outdoors, or in sewers  (*DOT 1984).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:   Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Keep gas in tank, avoid exposure to all other
        materials (*Merck 1983)

    Incompatibility (Materials to Avoid):  Avoid contact with all
    oxidizable materials,  including organic materials (*Merck 1983).  Will
    react  violently  with  water and most organic materials to produce heat  and
    toxic  fumes (*Sax 1979).

    Hazardous Decomposition or Byproducts:  Poisonous gas is produced  in
    fire (*CHRIS 1980).

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:   Not Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  7782-41-4
                                            Page 3  of 3
                             FLUORINE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (-Merck 1983)
                       Skin:   Yes  (*DOT  1984)
                       Ingestion:  Yes (-Sax 1975)

    Health Hazards  (Acute, Delayed,  and Chronic):  Poisonous;  may be  fatal
    if inhaled.   Vapor extremely irritating.  Contact may cause burns  to skin
    and eyes  ("DOT 1984).   Chronic absorption may cause osteosclerosis and
    calcification of ligaments  (*Merck 1983).

    Signs and Symptoms of Exposure:   Inhalation of  fluorine  causes
    coughing,  choking,  and chills.  An asymptomatic period of 1 to 2 days
    followed  by  fever,  cough,  tightness  in chest, rales, and cyanosis  indicate
    pulmonary edema ("Dreisbach 1977).   Small amounts of gas in air can have a
    strong caustic effect  on the cornea, eyelids, nose (*Grant 1974, *Merck
    1983).

    Medical Conditions  Generally Aggravated by  Exposure:  Not Found

    Emergency and  First Aid Procedures:  Move victim to fresh air; call
    emergency medical  care.  If not breathing, establish respiration.   If
    breathing is  difficult, give oxygen.  Remove and isolate contaminated
    clothing  and  shoes  at  the  site.  In  case of contact with material,
    immediately  flush  skin and eyes with running water for at least 15
    minutes.   Keep victim  quiet and maintain normal body temperature.   Effects
    may be delayed;  keep victim under observation.  (*DQT 1984).


SECTION  VI  r-  USE INFORMATION

    Manufacture of fluorochemicals and plastics; rocket propellant (*Weast
    1979). Chemical intermediate for sulfur hexafluoride, chlorine
    trifluoride,  bromine trifluoride, uranium hexafluoride, molybdenum
    hexafluoride, perchloryl fluoride, oxygen difluoride (*SRI).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be  Taken in  Case Material is Released or Spilled)

    Avoid  inhalation and skin  contact (see Section V above).  If you have not
    donned special protective  clothing approved for this material,  do not
    expose yourself to any risk of this  material touching you.  Stop leak if
    you can do it without  risk.  Use water spray to reduce vapors but do not
    put water on  leak  or spill  area.  Isolate area until gas has dispersed.   A
    fine water spray applied to the edge of the spill pool will start a hot
    flare  fire which will  burn the spilled material.  (Use extreme caution.)
    (-DOT  1984).

-------
                                           CAS  Registry Number:  7782-50-5
                                           Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31,  1985
                                                  Revision:
CHEMICAL IDENTITY -- CHLORINE

CAS Registry Number:  7782-50-5

Synonyms:  Bertholite; Molecular  Chlorine

Chemical Formula:   Cl

Molecular Weight:  70.91


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  TWA 1 ppm, 3 mg/m3 Air:  ceiling  concentration:   0.5
    ppm/15 minutes (*NIOSH/RTECS 1985)

    ACGIH TLV:  TVA  1 ppm (3 mg/mj);  STEL 3 ppm (9  mg/mj)  (*ACGIH 1980)

    IDLH:  25 ppm,  75  mg/m1 (NIOSH/OSHA 1978, p.  64)

    Other Limits Recommended:  Not Found


S'CTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   -30.3°F, -34.6°C  (*Weast 1983)

    Specific  Gravity (H20=l):   1.409 at  20°C, 6.86 atm (*Merck  1976)

    Vapor Pressure (omHg):  7600  at 30°C (*Weast  1983)

    Melting Point:   -150°F, -101°C (*Weast 1983)

    Vapor Density (AIR=1):  2.5 at -34.6°C (*NIOSH/OSHA 1981)

    Evaporation  Rate (Butyl acetate=l):   Not Found

    Solubility in Water:  0.57 g/100 mL at 30°C  (*Weast 1983)

    Appearance and Odor:  Greenish-yellow gas  with  suffocating odor  (*Merck
    1983).

-------
                                      CAS Registry Number:  7782-50-5
                                      Page 2  of 3
                              CHLORINE
SECTION III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Will not burn, but most combustible materials
    will burn in chlorine as  they do in oxygen; flammable gases will  form
    explosive mixtures with chlorine (*NFPA 1978).  Dry chemical,  carbon
    dioxide, water spray, fog or foam (DOT 1984, Guide 20).

    Special  Fire Fighting Procedures:  Evacuate area endangered by gas.
    Stay upwind;  keep out of  low areas.  Wear positive pressure breathing
    apparatus and full protective clothing.  Move container  from  fire area  i2
    you can do so without risk.  Spray cooling water on containers that are
    exposed to flames until well after fire is out (DOT 1984,  Guide 20). If it
    is necessary to  stop the  flow of gas, use water spray to direct escaping
    gas away from those effecting shut-off (*NFPA 1978).

    Unusual  Fire and Explosion Hazards:   May  ignite other combustible
    materials (wood, paper, oil, etc.).  Mixture with fuels  may cause
    explosion.   Container may explode in heat of fire.   Vapor explosion and
    poison hazard indoors,  outdoors or in sewers (DOT 1984,  Guide  20).
    Hydrogen and chlorine mixtures (5-95%) are exploded by almost  any form  of
    energy (heat, sunlight, sparks, etc.) (*NFPA 1978).   May combine  with
    water or steam to produce toxic and corrosive fumes of hydrochloric acid
    (*Environ Canada 1981).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (*NFPA 1978)

        Conditions to Avoid:  Heat and contact with hydrogen gas  or
        powdered metals (*NFPA 1978).

    Incompatibility (Materials to Avoid):  Plastics and rubber (*NIOSH/OSHA
    1981)

    Hazardous  Decomposition or Byproducts:  Emits highly toxic  fumes when
    heated (*Sax 1975).

    Hazardous  Polymerization: May Occur:   Not Found
                               May Not Occur:   Not Found

        Conditions to Avoid:  Not Found

-------
                                       CAS  Registry  Number:  7782-50-5
                                       Page 3 of 3
                               CHLORINE
SECTION V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes  (NIOSH/OSHA 1978, p. 64)
                       Skin:  Yes (NIOSH/OSHA  1978, p.  64)
                       Ingestion:   Not Found

    Health Hazards  (Acute,  Delayed, and Chronic):   Poisonous;  may be  fatal
    if inhaled.   Contact may cause  burns to skin and eyes ("DOT 1984).

    Signs and Symptoms of  Exposure:   Immediate,  severe  irritation of the
    nose, throat and eyes.   Severe  coughing; anxiety is usually present.
    Difficulty in breathing, rales,  cyanosis, and vomiting may be present
    (Arena 1979,  p.  246).

    Medical  Conditions  Generally Aggravated by Exposure:  Bronchitis or
    chronic lung conditions  (*ITI 1982).

    Emergency and  First Aid Procedures:  Move victim to fresh air;  call
    emergency medical care.   If not breathing, give artificial respiration.
    If breathing is  difficult, give oxygen.  Remove and isolate contaminated
    clothing and shoes  at the site.  In case of contact with material,
    immediately flush skin or eyes  with running water for at least 15
    minutes.   Keep victim quiet and maintain normal body temperature.   Effects
    may be delayed;  keep victim under observation (*DOT 1984).


SECTION VI  --  USE INFORMATION

    Manufacture  of chlorinated lime used in bleaching; manufacture of
    synthetic rubber and plastics;  purifying water; detinning and dezincing
    iron (*Merck 1983).


SECTION VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

Keep unnecessary people away; isolate hazard area and deny entry.  Stay
upwind; keep out of  low areas.  Ventilate closed spaces before entering them.
Wear positive pressure  breathing  apparatus and special protective clothing.
Keep combustibles (wood, paper, oil, etc.) away from spilled material.  Stop
leak if you can  do it without risk.  Use water spray to reduce vapor  but do
not: put water on leak or spill area.  Isolate area until gas has dispersed.
If a spill or leak from a drum or smaller container or a small leak from a
tank occurs,  then isolate 140 feet  in all directions.  If a large spill occurs
from a tank or from  many containers or drums, etc., first isolate 290 feet in
all directions.   Then evacuate in a downwind direction, an area of 0.7 miles
wide and one mile long.  If  water pollution occurs, notify appropriate
authorities (*DOT 1984).

-------
                                           CAS Registry Number:  7783-00-8
                                           Page 1 of 3
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- SELENOUS  ACID

CAS Registry Number:  7783-00-8

Synonyms:  Monohydrated Selenium Dioxide;  Selenious Acid

Chemical Formula:   H 0  Se

Molecular  Weight:  128.98


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Air:  TWA 200 yg (Selenium)/m3 (*NIOSH/RTECS 1985)

    ACGIH TLV:   TWA 0.2 mg/m3 (*ACGIH 1980)

    IDLH:  Not Found

    Other Limits Recommended: Toxicity information:  LD,   oral (rat)  25
    mg/kg  ("NIOSH/RTECS 1985)                         .


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H20=l):   3.004 at 15/4°C  (*Merck 1976)

    Vapor Pressure  (mmHg):   2 at 15°C  (*Merck 1976)

    Melting Point:   Decomposes  at 158°F, 70°C  (*Weast 1979)

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:   90 parts/100 parts at 32°F, 0°C  (--Merck 1976)

    Appearance and  Odor:   Colorless solid (*Merck 1976,  *Weast 1979);
    transparent, colorless  crystals  (Sax 1984, p.  2390)

-------
                                      CAS Registry Number:   7783-00-8
                                      Page 2 of 3
                          SELENOUS ACID


SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing Methods:  Not Found

    Special  Fire Fighting  Procedures:  Not Found

    Unusual Fire and Explosion Hazards:  Not Found


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:   Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Avoid heating (Sax  1984,  p.  2390)

    Incompatibility (Materials to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:   When  heated  to decomposition it
    emits  toxic  fumes of selenium (Sax 1984,  p. 2390)

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not  Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (*Rumack 1975 to Present)
                      Skin:  Yes  (*Rumack 1975 to  Present)
                      Ingestion:   Yes (-Rumack 1975 to Present)

    Health Hazards (Acute, Delayed,  and  Chronic):  Selenous acid and its
    salts  are capable of penetrating the skin and can produce acute poisonings
    (*Rumack 1975 to Present).   Causes irritations  and  burns of the skin
    ('vFriberg 1979).  It is highly toxic orally.  Inorganic selenium compounds
    may cause dermatitis (Sax 1984, p. 2390).

-------
                                      CAS Registry Number:  7783-00-8
                                      Page 3 of 3
                          SELENOUS ACID
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Signs and Symptoms of Exposure:  Toxic effects are similar to those of
    selenium and other selenium compounds.  Garlic odor of  breath  is a common
    symptom.  Pallor, nervousness, depression,  and digestive disturbances have
    been reported in cases of chronic exposure (Sax 1984, p.  2390).  The most
    common industrial injuries are irritations and burns of the  skin (*Friberg
    1979).

    Medical  Conditions Generally Aggravated by Exposure:   Not  Found

    Emergency and  First Aid Procedures:  (Non-Specific -- Poisonous Solid,
    n.o.s.)   Move victim to  fresh air; call emergency medical care.  Remove
    and isolate  contaminated clothing and shoes at the site.   In case of
    contact  with material, immediately flush skin or eyes with running water
    for at least 15  minutes  (DOT 1984, Guide 53).
SECTION  VI  --  USE  INFORMATION

    It is  used as  a' reagent  for alkaloids and as an oxidizing agent  (*Merck
    1976).  Isotope is  used  in labeling radiopharmaceuticals  ('"'Nuclear
    Medicine  Communication 3(4)247 1982).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be  Taken in Case Material is Released or Spilled)

    Avoid  inhalation and  skin contact.  Wear proper respiratory protection and
    protective clothing (see Section V above).  Ventilate area of  spill.
    Collect spilled material in most convenient and safe manner and  deposit in
    sealed containers for reclamation or disposal in a secured disposal
    landfill.   Liquid containing selenium inorganic compounds should be
    absorbed  in vermiculite, dry sand, earth or similar material (*NIOSH/OSHA
    1981).

-------
                                      CAS  Registry Number:  7783-06-4
                                      Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31.  1985
                                                   Revision:
CHEMICAL IDENTITY -- HYDROGEN  SULFIDE

CAS Registry Number:   7783-06-4

Synonyms:  Dihydrogen  Monosulfide; Dihydrogen Sulfide; Hydrogen Sulphide;
Hydrosulfuric Acid; Sewer Gas; Stink  Damp;  Sulfur Hydride; Sulfureted Hydrogen

Chemical Formula:  H s

Molecular  Weight:  34.08


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   Air:  Ceiling Concentration  20 ppm; Peak Concentration 50
    ppm/10 minutes (*NIOSH/RTECS 1985)

    ACGIH TLV:   TWA 10 ppm  (14 mg/m3); STEL 15  ppm  (21  mg/m3) (*ACGIH
    1980)

    IDLH:  300 ppm (NIOSH/OSHA 1978, p.  112)

    Other Limits  Recommended:   Occupational exposure to hydrogen  sulfide
    recommended standard - Air:  ceiling concentration 15 mg/m3/10  minutes
    (-NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  -76.59°F,  -60.33°C (*Merck 1976)

    Specific Gravity (H  0=1):   0.916 at  -60°C (Liquid) (Weiss  1980, p.

    518);  1.54 g/L at 0°C (*Merck 1976)

    Vapor Pressure (mmHg):  20 atmospheres at 25.5° C (*Weast 1979)

    Melting Point:  -121.9°F,  -85.49°C (*Merck 1976)

    Vapor Density (AIR=1):   1.19 (*Merck 1976)

    Evaporation  Rate  (Butyl acetate=l):   Not  Found

    Solubility in  Water:   1 gram dissolves in  242 mL at 20°C (*Merck 1976)

-------
                                      CAS Registry Number:  7783-06-4
                                      Page 2 of 4
                          HYDROGEN SULFIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Appearance and Odor:  Colorless gas with the characteristic  odor of
    rotten eggs (*Weast  1979; "Merck 1976).
SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  4.3% (*NFPA 1978)
        UEL:   45%  (*NFPA 1978)

    Extinguishing Methods:  A very flammable gas  (-NFPA  1978).  For small
    fires  let burn  unless leak  can be stopped immediately.   For  large  fires,
    use water spray,  fog or  foam  ("DOT 1984).

    Special  Fire Fighting  Procedures:  Stop flow of gas.   Use  water to keep
    fire-exposed containers  cool  and to protect men effecting  the  shut-off
    (*NFPA 1978).   Keep unnecessary people away; isolate  hazard  area and deny
    entry.  Stay upwind; keep out of low areas.  Ventilate closed  spaces
    before entering them.  Wear positive pressure breathing apparatus  and
    special protective clothing.  Evacuate area endangered by  gas.  Move
    container from  fire area.   Stay away from ends of tanks.   Withdraw
    immediately in  case of  rising sound from venting safety device or  any
    discoloration on  tank due to  fire.  Cool containers with water using
    unmanned device until well  after the fire is out.  Isolate for one-half
    mile in all directions  if tank car or truck is involved in fire ("DOT
    1984).

    Unusual  Fire and Explosion Hazards:  Compound is heavier than air and
    may travel a considerable distance to source of ignition and flash back.
    It forms explosive mixtures with air over a wide range.  Also  reacts
    explosively with  bromine pentafluoride,  chlorine trifluoride,  nitrogen
    triiodide,  nitrogen trichloride, oxygen difluoride, and phenyl diazonium
    chloride ("NFPA 1978).  When heated to decomposition,  it emits highly
    toxic  fumes  of  oxides of sulfur (Sax 1984, p.  1552).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:   Yes (-•'•NFPA 1978)

        Conditions  to Avoid:  Avoid physical damage to containers; sources
        of ignition;  storage near nitric acid, strong oxidizing  materials, and
        corrosive liquids or gases (*NFPA 1978).

-------
                                      CAS Registry Number:  7783-06-4
                                      Page 3  of 4
                          HYDROGEN SULFIDE
SECTION  IV --  REACTIVITY DATA  (Continued)

    Incompatibility (Materials to Avoid):  Incompatible with many materials
    including strong oxidizers, metals  (NIOSH/OSHA 1978, p. 112), strong
    nitric acid,  bromine pentafluoride, chlorine trifluoride,  nitrogen
    triiodide,  nitrogen trichloride, oxygen difluoride and phenyl diazonium
    chloride (*NFPA 1978).

    Hazardous  Decomposition or Byproducts:  When heated to decomposition,
    it emits highly toxic fumes of oxides of sulfur (Sax 1984, p. 1552).

    Hazardous  Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (*Sax 1975)
                       Skin:   Yes  (*Sax  1975)
                       Ingestion:  Not Found

    Health Hazards  (Acute, Delayed,  and Chronic):   Exposure to very high
    concentrations causes  immediate death (Sax 1984, p. 1552).   Also  death  or
    permanent injury may occur after very short exposure to small quantities
    (*Sax 1975).   It acts  directly upon the nervous system resulting  in
    paralysis of  respiratory  centers (*Casarett 1975).

    Signs and Symptoms of Exposure:   Contact with eyes causes painful
    conjunctivitis,  sensitivity  to light, tearing, and clouding of vision.
    Inhalation of low concentrations causes a runny nose with a loss  of
    smelling sense,  labored breathing, and shortness of breath.   Direct
    contact with  skin causes  pain and redness.  Other symptoms  of exposure
    include profuse salivation,  nausea,  vomiting, diarrhea,  giddiness,
    headache, dizziness, confusion, rapid beathing, rapid heart rate,
    sweating, weakness, sudden collapse, unconsciousness and death due to
    respiratory paralysis  (*Gosselin 1976).

    Medical Conditions  Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid Procedures:  Move victim to fresh air;  call
    emergency medical care.   If  not breathing, give artificial  respiration.
    If breathing  is difficult, give oxygen.  In case of contact with  material,
    immediately flush skin or eyes with running water for at least 15
    minutes.  Keep victim  quiet  and maintain normal body temperature.   Effects
    may be delayed;  keep victim  under observation  (*DOT 1984).

-------
                                      CAS Registry Number:  7783-06-4
                                      Page 4 of 4
                         HYDROGEN SULFIDE
SECTION  VI  --  USE INFORMATION

    Used in the  manufacturing of chemicals; in metallurgy;  analytical reagent;
    agricultural disinfectant; intermediate for sulfuric acid,  elemental
    sulfur, sodium sulfide, and other inorganic sulfides;  additives  in extreme
    pressure  lubriants and cutting oils; and as an intermediate for  organic
    sulfur compounds (*Merck 1976; *Encyc Occupat Health and  Safety  1971;
    *SRI).  Not  registered as a pesticide in the U.S.  (USEPA/Pesticide Index
    1985).
SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps  to  be  Taken  in Case Material is Released or Spilled)

    Keep unnecessary people away; isolate hazard area and deny  entry.  Stay
    upwind; keep out of low areas.  Ventilate closed spaces before entering
    them.  Wear positive pressure breathing apparatus and special protective
    clothing.  Do not touch spilled material; stop leak if you  can do it
    without risk.   Shut off ignition sources; no flares,  smoking or  flames in
    hazard area.  Use water spray to reduce vapors.   Isolate  area until gas
    has dispersed.  If a spill or leak from a drum or smaller container or a
    small  leak from a tank, then isolate 120 feet in all  directions.  If a
    large  spill from a tank or from many containers  or drums, etc.,  first
    isolate 240 feet in all directions.  Then evacuate in a downwind
    direction, an area 0.6 miles wide and 0.9 miles  long  ("DOT  1984).

-------
                                           CAS  Registry Number:  7783-07-5
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31.  1985
                                                   Revision:
CHEMICAL IDENTITY - HYDROGEN SELEN1DE

CAS Registry Number:  7783-07-5

Synonyms:  Dihydrogen Selenide;  Selane; Selenium Anhydride; Selenium
Dihydride;  Selenium Hydride

Chemical Formula:   H  Se

Molecular Weight:  80.98


SEECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  TWA 0.05  ppm  (*NIOSH 1979)

    ACGIH TLV:  TWA 0.05 ppm (*ACGIH  1980)

    IDLH:  2 ppm (NIOSH/OSHA  1978, p.  112).

    Other Limits Recommended:  Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   -42.3°F, -41.3°C (*Merck 1976)

    Specific Gravity (H 0=1):  2.12 at  -42°C/4°C  (*Merck 1976)

    Vapor Pressure (mmHg): 6536  at 18°C;  9120  at  30.8°C (*Merck 1976)

    Melting Point:   -86.31°F,  -65.73°C  (*Merck 1976)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:   270 ml in 100 ml at 72.5°F,  22.5°C (*Merck 1976)

    Appearance and Odor:  Colorless gas with an odor resembling decayed
    horseradish  (*Patty 1963)

-------
                                            CAS Registry Number:  7783-07-5
                                            Page 2  of 3
                         HYDROGEN SELENIDE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:  Extremely  flammable (DOT  1984, Guide 18)
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Let tank car, tank truck, or storage tank burn
    unless leak can  be stopped.   Small  fires:  dry chemical or carbon
    dioxide.  Large  fires:  water spray,  fog, or foam (DOT 1984, Guide 18).

    Special  Fire Fighting Procedures:   Isolate for 1/2 mile in all
    directions if tank car  or truck is  involved  in fire.  Stay upwind; keep
    out of low areas.  Withdraw immediately in case of rising sound from
    venting safety device or any  discoloration of tank due to fire.  Wear
    self-contained breathing apparatus  and full protective clothing.   Cool
    containers that  are  exposed to flames with water until well after the fire
    is out (DOT 1984, Guide 18).

    Unusual Fire and Explosion Hazards:   It  is  extremely  flammable; may be
    ignited by heat,  sparks, or flames.  Vapors may travel to a source of
    ignition and flash back.  Container may explode in heat of fire (DOT 1984,
    Guide  18).   It is dangerous and forms explosive mixtures with air ('"'Sax
    1979).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  It  should be stored out of the direct rays of
        the sun ("Sax 1975).  Keep away from heat and flames (Sax 1984, p.
        1552).

    Incompatibility (Materials to Avoid):  Incompatible with acid, water,
    halogenated hydrocarbons, oxidizers, hydrogen peroxide, and nitric acid
    ('•Sax  1979; NIOSH/OSHA  1978, p. 112).

    Hazardous  Decomposition or Byproducts:  It can decompose into toxic
    fumes  (-Sax 1975).

    Hazardous  Polymerization:   May Occur:   Not  Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  7783-07-5
                                            Page 3 of 3
                         HYDROGEN SELENIDE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (DOT 1984, Guide 18)
                       Skin:   Yes  (DOT  1984, Guide 18)
                       Ingestion:  Yes (DOT 1984, Guide 18)

    Health Hazards  (Acute, Delayed,  and Chronic):   It  is  a hazardous
    compound which can cause damage to the lungs and liver (Sax 1984,  p.  1551).

    Signs and Symptoms of Exposure:   Symptoms  may  include garlic odor on
    breath, dizziness, nausea, vomiting, labored breathing, bluing of  skin,
    pulmonary edema, metallic  taste, coughing, nasal secretion, pain in the
    chest, difficulty in breathing, irritation of the eyes, irritation of the
    respiratory  tract resulting  in bronchitis and conjunctivitis ("Browning
    1969,  ^Hamilton 1974;  *Patty 1963, *Merck 1976, *Clayton and Clayton
    1981-82).

    Medical Conditions Generally Aggravated by  Exposure:  Those
    experiencing dermatitis, chronic bronchitis, or any form of skin allergy
    or respiratory tract infection are at a greater risk (*Friberg 1979).

    Emergency and  First Aid Procedures:  Move victim to fresh air;  call
    emergency medical care.  If  not breathing, give artificial respiration.
    If breathing is difficult, give oxygen.  Remove and isolate contaminated
    clothing and shoes at  the  site.  In case of contact with material,
    immediately  flush skin or  eyes with running water for at least 15
    minutes.  Keep victim  quiet  and maintain normal body temperature.   Effects
    may be delayed; keep victim  under observation (DOT 1984,  Guide 18).


SECTION  VI --  USE INFORMATION

    It is an intermediate  for  metal selenides and organoselenium compounds.
    Also used in doping gas  for  preparation of semiconductor materials (*SRI).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING  AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    Wear self-contained breathing apparatus and  full protective clothing.
    Shut off ignition sources; no flares, smoking, or flames in hazard area.
    Stop leak if you can do  it without  risk.  Use water spray to reduce
    vapors; isolate area until gas has dispersed (DOT 1984, Guide 18).

-------
                                     CAS Registry Number:  7783-60-0
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31.  1985
                                                   Revision:
CHEMICAL IDENTITY -- SULFUR TETRAFLUORIDE

CAS Registry Number:  7783-60-0

Synonyms (SANSS 1983 Synonyms):   Sulfur Fluoride (SF4),  (T-4)-;

Tetrafluorosulfurane

Chemical Formula:  SF,
                     4

Molecular Weight:  108.06


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Air:  TWA 2.5  mg (Fluorine)/m3 (NIOSH/RTECS 1983,
    Volume 3,  p.  686)

    ACGIH TLV:   TWA 0.1 ppm;  STEL 0.3 ppm  (NIOSH/RTECS 1983,  Volume 3,
    p. 676)

    IDLH:  Not Found

    Other Limits  Recommended:   Occupational exposure to inorganic fluorides
    recommended standard - Air:   TWA  2.5 mg (Fluorine)/m3  (NIOSH/RTECS 1983,
    Volume 3,  p.  676).  Toxicity  information:  LC..   inhalation (rat) 0.08

    mg/liter/4 hours  (*NIOSH/RTECS  1985).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  -40°F, -40°C (Weast 1979, p. B-131)

    Specific Gravity (H 0=1):  Liquid at -108°F,  -78°C:  1.95;  Solid at

    -297°F,  -183°C:   2.349 (Merck 1983, p. 1289)

    Vapor Pressure  (mmHg):   Not  Found

    Melting Point:  -191°F,  -124°C (Weast 1979, p. B-131)

    Vapor Density (AIR=1):   Not  Found

    Evaporation  Rate (Butyl  acetate=l):  Not Found

    Solubility in Water:  Decomposes  in  water (Weast  1979, p. B-131)

-------
                                      CAS Registry Number:  7783-60-0
                                      Page 2 of 4
                       SULFUR TETRAFLUORIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Appearance and Odor:  Gas (Weast 1979, p.  B-131);  colorless  (Merck
    1983,  p.  1289).
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  This material is  non-combustible  (Hawley 1981,
    p.  983).  Small  fires:  dry chemical or carbon  dioxide.  Large fires:
    water  spray,  fog or foam.  Do not get water inside  container.  Move
    container  from fire area  if you can do so without risk.  Stay away from
    ends of tanks.   Spray cooling water on containers that are exposed to
    flames until  well after fire is out.   Isolate area  until gas has dispersed
    (DOT 1984,  Guide 15).

    Special  Fire Fighting  Procedures:  Keep unnecessary people away;
    isolate hazard area and deny entry.  Stay upwind; keep out of low areas.
    Ventilate  closed spaces before entering them.   Wear positive pressure
    breathing  apparatus and full protective clothing.  Evacuate area
    endangered by gas (DOT 1984, Guide 15).

    Unusual Fire and Explosion Hazards:   Container may explode  in heat  of
    fire (DOT  1984,  Guide 15).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes, thermostable to 600°C  (Merck 1983, p.  1289)

        Conditions to Avoid:  Reacts violently with water (Merck 1983, p.
        1289)

    Incompatibility (Materials to Avoid):   Reacts violently with water.   It
    is  decomposed by concentrated sulfuric acid (Merck  1983, p. 1289).

    Hazardous  Decomposition or Byproducts:  When  heated to decomposition,
    it  emits very toxic fumes of fluorides and sulfur oxides (Sax 1984, p.
    2492).

-------
                                      CAS Registry Number:   7783-60-0
                                      Page 3 of 4
                      SULFUR TETRAFLUORIDE
SECTION  IV  --  REACTIVITY DATA

    Hazardous Polymerization:  May Occur:  Not Found
                               May  Not  Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:   Yes (Hawley  1981, p. 983)
                      Skin:  Not Found
                      Ingestion:   Not Found

    Health Hazards (Acute,  Delayed, and Chronic):  This material  is highly
    toxic  by inhalation; it is a strong irritant  to eyes and mucous membranes
    (Hawley 1981, p. 983).  Poisonous; may be fatal if  inhaled.  Contact may
    cause  burns  to skin  and eyes.   Contact with liquid  may cause frostbite
    (DOT 1984, Guide 15).

    Signs  and Symptoms of  Exposure:  Not Found

    Medical  Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:   Move victim  to fresh air;  call
    emergency medical care.   If not breathing,  give artificial respiration.
    If breathing is difficult, give oxygen.  Remove and isolate contaminated
    clothing and shoes at the site.  In case of contact with material,
    immediately  flush skin or eyes  with running water for at least 15
    minutes.   Keep victim quiet and maintain normal body temperature.   Effects
    may be delayed; keep victim under  observation (DOT  1984, Guide 15).


SECTION  VI  --  USE INFORMATION

    This material is used as a selective fluorinating agent (Merck 1983, p.
    1289).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING  AND  USE
(Steps to  be Taken in Case Material is Released or Spilled)

    Do not breathe vapors; wear proper respiratory protection (see Section V
    above).   Stop leak if you can  do so without risk.   Do not put water on
    leak or spill area.  Small spills:  flush area with flooding amounts of
    water.  Large spills:  dike far ahead of spill for  later disposal.   Do not
    get water inside container.  Isolate area until gas has dispersed (DOT
    1984,  Guide  15).

-------
                                     CAS Registry Number:  7783-60-0
                                     Page 4  of 4
                      SULFUR  TETRAFLUORIDE
COMMENTS:

    Sources  searched but no information found:
        ACGIH  1983
        NIOSH/OSHA 1978
        NFPA 1984
        Student 1981
        Weiss  1980
        CHRIS  1978
        Doull  1980
        Clayton and Clayton 1981-82
        Arena  1979
        Gosselin 1984
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes  1982
        Physicians Desk Reference  1985
        Gilman 1985

-------
                                     CAS Registry Number:  7783-70-2
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- ANTIMONY PENTAFLUORIDE

CAS Registry Number:  7783-70-2

Synonyms:  Antimony Fluoride; Antimony  (V) Fluoride; Antimony  (V)
Pentafluoride; Pentafluoroantimony

Chemical Formula:   SbF

Molecular  Weight:  216.76


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  TWA 0.5 mg  (Antimony)/m3; 2.5 mg (Fluoride)/mm3
    (NIOSH/RTECS 1983,  Volume 1,  p. 429)

    ACGIH TLV:   TWA 0.5 mg/m3 (as Antimony)  (*ACGIH 1980)

    IDLH:  Not Found

    Other Limits Recommended:   IDLH for Antimony  and Compounds:  80 mg/m3
    (NIOSH/OSHA 1978, p. 48).  Toxicity information:  LC   inhalation

    (mouse)  0.27 mg/liter (NIOSH/RTECS 1985).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   286°F, 141°C (*Merck  1976)

    Specific Gravity (H20=l):   3.097 at 25.8°C  (*Merck 1976)

    Vapor Pressure (mmHg):   Not  Found

    Melting  Point:   47°F,  8.3°C (*Merck 1976)

    Vapor Density (AIR=1):   Not  Found

    Evaporation  Rate (Butyl  acetate=l):   Not Found

    Solubility in Water:   Soluble  (*Weast 1979)

    Appearance and Odor:  Oily, colorless liquid (*NFPA  1978); sharp odor
    (*CHRIS  1978).

-------
                                      CAS Registry Number:  7783-70-2
                                      Page 2 of 3
                     ANTIMONY PENTAFLUORIDE

SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:  Not flammable (Weiss 1980,  p.  121)
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Do not use water or  foam on fire or on adjacent
    fires; extinguish with dry chemicals or carbon dioxide (Weiss  1980, p.
    121).

    Special  Fire Fighting Procedures:  Wear full  protective clothing  (*NFPA
    1978)  and acid-gas-type canister mask ('"CHRIS 1978).   Move  container from
    fire area.   Spray cooling water on containers that are exposed to flames
    until  well  after fire is out  (DOT 1984, Guide 59). Reacts  violently with
    water  (-Merck 1976).

    Unusual  Fire and Explosion Hazards:  Reacts violently with water
    (*Merck 1976)  to form poisonous hydrogen fluoride fumes.  If confined and
    wet can cause explosion.  May cause fire in contact with combustible
    material (Weiss 1980, p. 121).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (Weiss 1980,  p.  121)

        Conditions to Avoid:   If  confined and wet, can cause explosion.
        May cause fire in contact with combustible material (Weiss 1980, p.
        121).

    Incompatibility  (Materials to Avoid):  Reacts  violently with water
    (*Merck 1976).

    Hazardous  Decomposition or Byproducts:  When heated  with  water, it
    emits  poisonous hydrogen fluoride fumes (Weiss 1980, p. 121).

    Hazardous  Polymerization:  May Occur:
                               May Not Occur:  Yes  (Weiss 1980,  p.  121)

        Conditions to Avoid:  Not Found
SECTION  V— HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Weiss 1980,  p.  121)
                      Skin:  Yes  (*NFPA 1975)
                      Ingestion:   Yes (Gosselin 1984,  p.  11-133)

-------
                                      CAS Registry Number:   7783-70-2
                                      Page 3 of 3
                     ANTIMONY PENTAFLUORIDE
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Health Hazards (Acute, Delayed,  and Chronic):  The compound is
    irritating to  eyes,  skin, and lungs (^NFPA 1975).   Contact with eyes or
    skin causes severe burns ('"CHRIS 1978).   The compound  is extremely toxic
    with a probable oral lethal dose of 5-50 mg/kg or between 7 drops and
    teaspoonful for a 150 pound person (antimony salts)  (*Gosselin 1976).

    Signs and  Symptoms of Exposure:  Ingestion causes vomiting  and  severe
    burns  of mouth and throat.  Overexposure by any route  can cause bloody
    stools,  slow pulse,  low blood pressure,  coma,  convulsions, and cardiac
    arrest (*CHRIS 1978).

    Medical  Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:   Move victim  to  fresh air; call
    emergency medical care.  If not breathing, give artificial respiration; if
    difficult breathing, give oxygen.  In case of contact  with material,
    immediately flush with running water for at least 15 minutes.  Remove and
    isolate contaminated clothing and shoes  at the site.   Effects may be
    delayed; keep  victim under observation (DOT 1984, Guide 59).


SECTION  VI -- USE INFORMATION

    Fluorination of organic compounds j(*Merck 1976).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken in Case Material is Released or Spilled)

    Wear proper respiratory protection, full protective clothing and eye
    protection (see Section V above).  Flood spills with large volumes of
    water  (-NFPA 1978).  Reacts violently with water (*Merck 1976).  Do not
    touch  spilled  material; stop leak if you can do so  without risk.  Use
    water  spray to reduce vapors.  Absorb spills with noncombustible absorbent
    material.   For large spills dike far ahead (DOT 1984,  Guide 59).

-------
                                     CAS Registry  Number:  7783-80-4

                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM

                                                  Date: October  31,  1985

                                                  Revision:
CHEMICAL IDENTITY -- TELLURIUM  HEXAFLUORIDE



CAS Registry  Number:  7783-80-4



Synonyms:  Tellurium Fluoride (TeF,); Tellurium Fluoride  (TeF,),
                                  o                         o

(OC-6-11)-



Chemical Formula:   TeF,
                     o


Molecular  Weight:  241.61





SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION



    OSHA PEL:  TWA 0.02 ppm  (NIOSH/OSHA 1978,  p.  172) 200 yg/m3

    (*NIOSH/RTECS 1985)



    ACGIH TLV:  TWA 0.02 ppm, 0.2 mg/m3 (as Tellurium)  (*ACGIH 1980)



    IDLH:  1 ppm (NIOSH/OSHA  1978, p. 172)



    Other Limits Recommended:  Not Found





SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS



    Boiling Point:   95.9°F, 35.5°C (*Weast 1979)



    Specific Gravity (H20=l):  2.499 at  -10°C  (*Merck 1976)



    Vapor Pressure (mmHg):  Greater than 760 (NIOSH/OSHA  1978,  p.  172)



    Melting Point:   -35.7°F, -37.6°C (*Merck  1976)



    Vapor Density (AIR=1):  Greater than 1  (NIOSH/OSHA 1978,  p.  172)



    Evaporation  Rate  (Butyl acetate=l):  Not Found



    Solubility  in Water:   Decomposes (Weast 1979, p. B-132)



    Appearance and Odor:  Colorless gas; repulsive  odor  (*Merck 1976)

-------
                                      CAS Registry Number:  7783-80-4
                                      Page 2 of 3
                      TELLURIUM HEXAFLUORIDE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  This material is not  combustible  (NIOSH/OSHA
    1978,  p. 172).   Small fires:  dry chemical or  carbon dioxide.  Large
    fires:,  water spray, fog or foam (DOT 1984, Guide 15).

    Special  Fire Fighting Procedures:  Keep unnecessary people away;
    isolate  hazard area and deny entry.  Stay upwind; keep  out of  low areas.
    Ventilate closed spaces before entering them.   Wear positive pressure
    breathing apparatus and full protective clothing.  Do not  get  water inside
    container.   Move container from fire area if you can do so without risk.
    Stay away from ends of tanks.  Spray cooling water on containers that are
    exposed  to flames until well after fire is out.   Isolate area  until gas
    has dispersed (DOT 1984, Guide 15).

    Unusual  Fire and Explosion Hazards:  Container may explode in heat of
    fire (DOT 1984,  Guide 15).  When heated to decomposition,  it emits very
    toxic  fumes of fluoride and tellurium (Sax 1984, p.  2502).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:   Not Found

        Conditions to Avoid:  Decomposes in water, acid, and alkali  (*Weast
        1979).

    Incompatibility (Materials to Avoid):   None hazardous (NIOSH/OSHA 1978,
    p.  172).

    Hazardous  Decomposition or Byproducts:  Toxic gases and  vapors such as
    hydrogen fluoride may be released when tellurium hexafluoride  decomposes
    (*NIOSH/OSHA 1981).  When decomposed, toxic fumes of fluoride  and
    tellurium are released (Sax 1984, p.  2502).

    Hazardous  Polymerization:  May Occur:   Not Found
                               May  Not  Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  7783-80-4
                                      Page 3 of 3
                      TELLURIUM HEXAFLUORIDE
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes ("Sax 1979)
                      Skin:   Yes  (-Sax  1979)
                      Ingestion:  Yes (-Sax 1979)

    Health Hazards  (Acute, Delayed,  and  Chronic):  Capable of causing death
    or permanent  injury.   Acute  -- the material is highly toxic  by  inhalation
    exposure and  a  strong  irritant to skin, eyes, the lungs,  the throat,  and
    stomach ("Sax 1979).   Death  can occur from filling of the lungs with  fluid
    (pulmonary edema)  or from  asphyxiation due to spasm of the throat  (larynx)
    or bronchi (*Rumack  1975 to  Present).

    Signs and Symptoms of Exposure:  Symptoms  after inhalation include
    headache,  difficult breathing, and garlic odor on the breath (NIOSH/OSHA
    1978,  p.  173).   Eye exposure causes  irritation (reddening) and  pain
    (*Rumack 1975 to Present).   Skin contact leads to burns with bluish-black
    patches.   Garlic odor  on breath, sweat and urine (ACGIH 1980, p. 382).

    Medical  Conditions Generally Aggravated by Exposure: Those with
    impaired pulmonary function, especially obstructive airway diseases are at
    a greater risk  (*NIOSH/OSHA  1981).

    Emergency and First Aid  Procedures:  Treatment is  similar to that  for
    chlorine gas  exposure.  For  inhalation exposures, remove  patient from area
    immediately.  Establish respiration.   Administer oxygen at 100  percent
    humidification  for short periods, then at a concentration comfortable to
    the patient.  For  eye  or skin exposure, irrigate area for 15 minutes  with
    water (*Rumack  1975 to Present).


SECTION  VI  -- USE INFORMATION

    Not Found
SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in  Case Material is Released or Spilled)

    Wear respirators for entry into closed areas.  Ventilate  area of  leak  to
    disperse vapors.   Stop the flow of the leak.  Remove the  leaking  container
    to a safe place in the open air and allow the leak to disperse
    (*NIOSH/OSHA  1981).  Wear positive pressure breathing apparatus and  full
    protective clothing.  Use water spray to reduce vapor but do not  put
    water  on leak or spill area.  Small spills:  flush area with flooding
    amounts of water.   Large spills:  dike far ahead of spill for later
    disposal.   Do not  get water inside container.  Isolate area until gas  has
    dispersed (DOT  1984, Guide 15).

-------
                                           CAS Registry Number:   7784-34-1
                                           Page 1 of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October  31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- ARSENOUS TRICHLORIDE

CAS Registry Number:   7784-34-1

Synonyms:  Arsenic Trichloride; Arsenic Butter;  Arsenic Chloride; Arsenic
(III) Chloride; Arsenic  (III) Trichloride; Arsenious Chloride;  Arsenous
Chloride;  Butter of Arsenic; Caustic Arsenic Chloride; Caustic  Oil of Arsenic;
Fuming Liquid Arsenic; Trichloroarsine

Chemical Formula:   AsCl.

Molecular  Weight:   181.28


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Air:  TWA 10 ug (Arsenic)/m3 (NIOSH/RTECS 1983,  Volume  1,
    p. 439)

    ACGIH TLV:   TWA 0.2  mg/m3 (as arsenic,  for  soluble compound of
    arsenic)  (*ACGIH  1983)

    IDLH:  Not Found

    Other Limits Recommended:  Occupational exposure to inorganic arsenic
    recommended standard - air:   ceiling limit 2 mg/m3/15 minutes
    ("•NIOSH/RTECS  1985).  Industrial substance suspect of carcinogenic
    potential for  man (arsenic trioxide  production) (ACGIH 1984,  p. 41).
    Toxicity  information:  LC..   inhalation (cat) 0.1 mg/liter/1  hour

    (*NIOSH/RTECS  1985).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   266.38°F,  130.21°C (*Merck 1983)


                     {2
Specific Gravity (H_0=l):   2.1497 at 25°C/4°C (*Merck  1983)
    Vapor Pressure  (mmHg):  10 at 23.5°C  (*Patty 1963)

    Melting  Point:  3.2°F,  -16°C  (*Merck 1983)

    Vapor Density (AIR=1):  6.25 (*Clayton and Clayton 1981-82)

-------
                                      CAS Registry Number:  7784-34-1
                                      Page 2 of 4
                       ARSENOUS TRICHLORIDE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:  One mole in 9 moles (*Merck 1983)

    Appearance and Odor:  Yellowish oily liquid or needle-shaped  crystals
    (*Patty 1963);  acrid odor  (*CHRIS 1978).


SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  This compound is  not  flammable  (*NFPA  1978).
    Extinguish with  dry chemical, carbon dioxide,  water spray,  fog, or foam
    (DOT 1984, Guide 55).

    Special  Fire Fighting  Procedures:.  Wear positive pressure  breathing
    apparatus and special protective clothing.   Move container  from fire area
    if you can do so without risk.  Fight fire from maximum  distance.  Dike
    fire control water for  later disposal; do not scatter  the material (DOT
    1984,  Guide 55).

    Unusual Fire and Explosion Hazards:  When in contact with active  metals
    such as arsenic, iron,  aluminum, zinc, or when heated  to decomposition, it
    emits  highly toxic fumes of arsenic (*Sax 1975).  Upon contact  with water
    hydrogen chloride is produced (*NFPA 1978).   Water causes it  to decompose
    to yield arsenic acid and hydrochloric acid (Student 1981,  p. 49).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (Weiss 1980,  p.  128)

        Conditions to Avoid:  Air, ultraviolet light (*Hawley  1981)

    Incompatibility  (Materials to Avoid):   Active metals such as arsenic,
    iron,  aluminum,  zinc (*Sax 1975); decomposed by water  to form arsenic
    hydroxide and hydrogen  chloride (Merck 1983,  p.  117).

-------
                                      CAS Registry Number:  7784-34-1
                                      Page 3 of 4
                       ARSENOUS TRICHLORIDE
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it emits toxic fumes of arsenic.  Contact with water produces hydrogen
    chloride (--Sax 1975).

    Hazardous Polymerization:   May Occur:
                               May Not Occur:  Yes  (Weiss 1980, p. 128)

        Conditions to Avoid:   Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (-Rumack 1975 to Present)
                      Skin:   Yes  (Gosselin 1984, p. 111-42)
                      Ingestion:  Yes (Gosselin 1984,  p.  111-42)

    Health Hazards  (Acute, Delayed,  and  Chronic):   It  can cause death.  In
    acute exposures, it  is extremely toxic and caustic, owing not  only to  the
    poisonous nature of  arsenic, but also to the release of hydrochloric acid
    in the presence  of water  (*Grant 1974).   Exposure to the skin  causes local
    irritation and blisters.   Inhalation or ingestion causes hemorrhagic
    gastroenteritis  resulting  in loss of fluids and electrolytes,  collapse,
    shock and death  (Gosselin  1984, p. 111-42).  Chronic poisoning can lead  to
    peripheral nerve damage, skin conditions, liver damage (*Sax  1975, *Merck
    1976); and it  has been implicated in the induction of skin and lung cancer
    (Gosselin 1984,  p. Ill-42, Oilman 1980).  The fatal human dose is 70-180
    rag depending on  the  weight of the victim (Weiss 1980, p. 128).

    Signs and Symptoms of Exposure:  Death is possible.   Symptoms usually
    appear one-half  to one hour  after ingestion.  Symptoms include a sweetish
    metallic taste,  garlicky odor on the breath and stools, constriction in
    throat, difficulty swallowing, abdominal pain, vomiting, diarrhea, bluing
    of the skin, weak pulse, dizziness, headaches, coma, and convulsions
    (^Gosselin 1976). Exposure  to vapors causes spasm of eyelids, tearing,
    pain,  and reddening  (*Grant  1974).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Move victim to fresh air and call
    emergency medical care.   If  not breathing,  give artificial respiration;  if
    breathing is difficult, give oxygen.   In case of contact with  material,
    immediately flush skin or  eyes with running water for at least 15
    minutes.  Remove material  from skin immediately; remove and isolate
    contaminated clothing  and  shoes at the site.  Effects may be  delayed so
    keep victim under observation  (DOT 1984, Guide 55).

-------
                                      CAS Registry Number:  7784-34-1
                                      Page 4 of 4
                       ARSENOUS TRICHLORIDE
SECTION VI  -- USE INFORMATION

    Ceramics  industry; synthesis of  chlorine - containing arsenicals  (*Merck
    1983);  chemical intermediate for arsenic insecticides and arsenic
    Pharmaceuticals ("SRI).


SECTION VII -- PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps  to be  Taken in Case Material  is Released or Spilled)

    Keep unnecessary people away; isolate hazard area and deny entry.   Stay
    upwind; keep out of low areas.   Ventilate closed spaces  before entering
    them.   Wear positive pressure breathing apparatus and special protective
    clothing.  Remove and isolate contaminated clothing at the site.  Do not
    touch spilled material; stop leak if you can do so without risk.  Use
    water spray to reduce vapors. Small spills:  absorb with sand or other
    non-combustible absorbent material and place into containers  for  later
    disposal.  Large spills:  dike far ahead of spill for later disposal (DOT
    1984, Guide 55).                                               •

-------
                                     CAS Registry Number:   7784-42-1
                                     Page 1 of 3
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31.  1985
                                                   Revision:
CHEMICAL IDENTITY -- ARSINE

CAS Registry Number:  7784-42-1

Synonyms:  Arsenic  Hydride; Arsenic Trihydride; Arseniuretted Hydrogen;
Arsenous  Hydride; Hydrogen Arsenide

Chemical  Formula:  AsH

Molecular  Weight:  77.93


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Air:  TWA 0.05  ppm  (*NIOSH/RTECS 1985)

    ACGIH TLV:  TWA 0.05 ppm,  0.2 mg/m3  (*ACGIH 1983)

    IDLH:  6 ppm (*Encyc  Occupat Health and Safety  1983)

    Other Limits Recommended:  Occupational exposure to inorganic arsenic
    recommended standard -- ceiling  0.002 mg/ma/15 minutes, air
    (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  -80.4°F, -62.5°C (*Merck 1983)

    Specific Gravity  (H20=l):  2.695 (gas);  1.689  at 185°F,  84.9°C

    (liquid)  (*Weast 1979)

    Vapor Pressure  (mmHg):  Greater than 1 atm (NIOSH/OSHA 1978, p. 48)

    Melting Point:   -179°F,  -117°C (*Merck 1983)

    Vapor Density (AIR=1):   2.66 (*Sax 1984)

    Evaporation  Rate (Butyl acetate=l):   Not  Found

    Solubility in Water:   20 ml/100 ml  at 68°F, 20°C (*Clayton  and Clayton
    1981-1982)

    Appearance and  Odor:  Colorless  gas; disagreeable  garlic odor (*Merck
    1983).

-------
                                            CAS Registry Number:  7784-42-1
                                            Page 2 of 3
                              ARSINE
SECTION III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash Point (Method Used):  Not Found
    Flammable  Limits:  Extremely  flammable; may be ignited by heat,  sparks,
    or flames (*DOT 1984)
        LEL:   Not  Found
        UEL:   Not  Found

    Extinguishing Methods:  Let small fires burn.   Use  water spray, fog, or
    foam for large  fires.   For massive  fire in cargo area use unmanned hose
    holder or monitor nozzles; if this  is impossible, withdraw from  area and
    let fire burn (*DOT  1984).

    Special  Fire Fighting Procedures:  Cool containers that are exposed to
    flames with water from  the side until well after fire is out.  Isolate for
    1/2 mile in all directions if tank car or truck is involved in fire (*DOT
    1984).

    Unusual  Fire and Explosion Hazards:  Vapors may travel to a source  of
    ignition and flash back.  Container may explode in heat of fire  (*DOT
    1984).  When heated to  decomposition, emits highly toxic fumes (*Sax 1979).


SECTION IV -- REACTIVITY DATA

    Stability:   Unstable:  Yes  (*Merck 1983)
                 Stable:

        Conditions  to Avoid:  On  exposure to light, moist arsine decomposes
        quickly,  depositing shiny black arsenic (*Merck 1983).

    Incompatibility  (Materials to Avoid):  Can react vigorously with
    oxidizing materials.  May explode when exposed to chlorine,  nitric acid,
    or potassium plus ammonia (Sax 1984, p.  324;  NIOSH/OSHA 1978, p. 48).

    Hazardous  Decomposition or Byproducts:  When heated to decomposition,
    emits highly toxic fumes  (Sax 1984,  p. 324).

    Hazardous  Polymerization:  May Occur:  Not  Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (*Sax 1975)
                      Skin:  Yes  (*DOT 1984)
                      Ingestion:  Yes (*DOT 1984)

-------
                                            CAS Registry Number:  7784-42-1
                                            Page 3 of 3
                              ARSINE
SECTION  V -- HEALTH  HAZARD DATA (Continued)

    Health Hazards (Acute, Delayed, and Chronic):  This material is highly
    toxic by inhalation;  a very  short exposure to small quantities  may cause
    death or permanent injury  (Sax  1984, p. 323).  Arsine is the most  powerful
    hemolytic poison  encountered in industry (^Hamilton 1974).

    Signs and Symptoms of Exposure:   Signs of  poisoning usually develop
    within several  hours  after exposure.  Frontal headache,  dizziness, nausea
    and vomiting, stomach  pain,  sweating, twitching,  and weakness occur early,
    followed by  tea-colored urine or bloody urine.   Later there may be albumen
    and casts in the  urine or suppression of urine flow.   Jaundice  and
    tenderness over the  liver may appear.  Anemia may develop.   Delirium may
    develop, along  with  convulsions, low blood pressure,  and finally cardiac
    failure causing death  (Sax 1984, p. 324; NIOSH/OSHA 1978,  p.  48).

    Medical Conditions Generally Aggravated by  Exposure:   Not Found

    Emergency and First Aid  Procedures:  Move victim to fresh air.   If not
    breathing, give artificial respiration.  If breathing is difficult,  give
    oxygen.  Remove and  isolate  contaminated clothing and shoes at  the site.
    In case of contact with material, immediately flush skin or eyes with
    running water for at  least 15 minutes.  Keep victim quiet and maintain
    normal body  temperature.  Effects may be delayed; keep victim under
    observation  (*DOT 1984).


SECTION  VI --  USE  INFORMATION

    This material is  used  in the manufacture of electronic components.  It may
    be used in organic synthesis and as a poison gas  for military purposes
    (*SRI).
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(steps to  be Taken  in  Case Material is Released or Spilled)

    No flares, smoking, or flames in area.  Use water spray to reduce vapors.
    Isolate area  until arsine gas has dispersed.  Stay upwind; keep out of low
    areas.  Wear  positive pressure breathing apparatus and full protective
    clothing (*DOT  1984).  There is a high potential for generation of arsine
    gas when inorganic arsenic is exposed to freshly-formed molecular hydrogen
    (*Blackwell 1979).

-------
                                           CAS Registry Number:  7784-46-5
                                           Page 1 of 3
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- SODIUM ARSENITE

CAS Registry Number:  7784-46-5

Synonyms:  Arsenenous  Acid, Sodium Salt;  Arsenious Acid, Monosodium Salt;
Atlas 'A1;  Chem Pels C; Chem-Sen 56; Kill-All; Penite;  Prodalumnol;
Prodalumnol Double; Sodium Metaarsenite; Arsenious Acid,  Sodium Salt

Chemical Formula:  NaAsO   (Merck 1983, p.  1230)

Molecular Weight:   129.91 (Sax 1984, p. 2412)


SECTION  I  -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   OSHA Std-Air:   TWA 10 ug  (Arsenic)/m3  (*NIOSH/RTECS 1985)

    ACGIH TLV:   (Arsenic and soluble compounds,  as Arsenic)  TWA 0.2 mg/m3
    (ACGIH 1985,  p.10)

    IDLH:   Not Found

    Other Limits  Recommended:   Toxicity  information:  LD..   oral (rabbit)
    7.5 mg/kg (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:  Not  Found

    Specific Gravity (H20=l):   1.87  (*Weast 1979)

    Vapor  Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor  Density  (AIR=1):   Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not Found

    Solubility in  Water:  Freely soluble (*Merck 1983).

    Appearance and Odor:  White or grayish-white powder (*Merck  1983) with
    a salty-taste (*White-Stevens 1971)

-------
                                            CAS Registry Number:   7784-46-5
                                            Page 2 of 3
                          SODIUM ARSENITE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  Small fires:   dry chemical, carbon dioxide,
    water  spray,  or  foam.  Large fires:  water spray,  fog, or foam ("DOT 1984)

    Special  Fire Fighting Procedures:  Keep unnecessary  people away; stay
    upwind;  keep out of  low areas.  Wear self-contained  breathing apparatus
    and full protective  clothing (-DOT 1984).

    Unusual  Fire and Explosion Hazards:  This material  may burn but does
    not ignite readily  (-DOT 1984).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:   Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Slowly converted in solution  to arsenates by
        atmospheric  oxygen; in dry state it is decomposed by carbon dioxide
        (*IARC 1972-1985).

    Incompatibility (Materials to Avoid):   Not  Found

    Hazardous  Decomposition or Byproducts:  When heated it emits toxic
    fumes  of arsenic and sodium oxide (Sax 1984,  p.  2412).

    Hazardous  Polymerization:  May Occur:  Not Found
                               May Not  Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (--DOT 1984)
                      Skin:  Yes  (Sax 1984, p. 2412)
                      Ingestion:   Yes (Sax 1984, p.  2412)

-------
                                            CAS Registry Number:  7784-46-5
                                            Page 3 of 3
                           SODIUM ARSENITE
SECTION  V -- HEALTH HAZARD DATA (Continued)

    Health Hazards (Acute, Delayed, and Chronic):  Extremely toxic:
    probable oral lethal dose  (human) 5-50 mg/kg, between 7 drops and one
    teaspoon for 70 kg person  (150  Ib.) (*Gosselin 1976).  Poisonous if
    swallowed or inhaled (*DOT 1984).  Human suspected carcinogen (Sax 1984,
    p.  2412).

    Signs and Symptoms of Exposure:   Symptoms  are  like those of other
    arsenic compounds  (Sax 1984, p. 2412).  Nausea, vomiting and diarrhea may
    occur from ingestion.   Patient  may collapse and go into shock with weak,
    rapid pulse, cold  sweat, preceding death.  Chronic poisoning may cause
    loss of appetite,  cramps,  nausea, constipation, or diarrhea.   Liver damage
    may cause jaundice.   Itching or skin pigmentation changes  may occur (Sax
    1984,  p. 320).

    Medical Conditions  Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid Procedures:  Move victim to fresh air; call
    emergency medical  care.  Remove and isolate contaminated clothing.
    Immediately wash skin or eyes with running water for at least 15 minutes
    (*DOT 1984).


SECTION  VI --  USE INFORMATION

    Technical grade is  90-95%  pure  (Merck 1983, p.  1230).  Commercially 95-98
    percent pure (Sax  1984, p.  2412).  The material is used in manufacturing
    of  arsenical soap  for  use  on skin; treating vines against  certain scale
    diseases (Merck 1983,  p. 1230); wood preservation (*IARC 1972-1985);
    reagent in preparation of  methylene iodide; corrosion inhibitor ("SRI);
    and herbicidal and pesticidal purposes (-IARC 1972-1985).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps  to be Taken in  Case Material is Released or Spilled)

    Protective clothing, protective boots, and protective respiratory
    equipment should be worn (*Encyc Occupat Health and Safety 1983).  Do not
    touch spilled material; stop leak if you can do so without risk.  Absorb
    small spills with  sand or  other noncombustible absorbent material,  and
    place into containers  for  later disposal.  Small dry spills:   with clean
    shovel place material  into clean, dry container and cover;  move containers
    from spill area.   Large spills:  dike far ahead of spill for later
    disposal (*DOT 1984).

-------
                                      CAS Registry Number:  7786-34-7
                                      Page 1 of 4
                        EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date:  October 31,  1985
                                                    Revision:
CHEMICAL IDENTITY  -- MEVINPHOS

CAS Registry Number:  7786-34-7

Synonyms:  Crotonic Acid,  3-Hydroxy-,  Methyl Ester, Dimethyl Phosphate,
(E)-; Apavinphos;  l-Methoxycarbonyl-l-propen-2-yl Dimethyl Phosphate;
2-Butenoic Acid,  3-((Dimethoxyphosphinyl)oxy)-,  Methyl Ester;  2-Carbomethoxy-
1-Methylvinyl Dimethyl Phosphate; l-Carbomethoxy-l-Propen-2-yl Dimethyl
Phosphate; 2-Methoxycarbonyl-l-Methylvinyl Dimethyl Phosphate;
3-Hydroxycrotonic Acid Methyl Ester Dimethyl Phosphate;
3-[(Dimethoxyphosphinyl)oxy]-2-Butenoic Acid Methyl Ester; Alpha-2-
Carbomethoxy-1-Methylvinyl Dimethyl Phosphate; Cis-2-Methoxycarbonyl-l-
Methylvinyl Dimethylphosphate; Cis-Phosdrin; CMDP; Compound 2046;  Crotonic
Acid, 3-Hydroxy-,  Methyl Ester, Dimethyl Phosphate; Dimethyl
(l-Methoxycarboxypropen-2-yl) Phosphate; Dimethyl 2-Methoxycarbonyl-
1-Methylvinyl Phosphate; Dimethyl Methoxycarbonylpropenyl Phosphate; Dimethyl
Phosphate of Methyl  3-Hydroxy-cis-Crotonate; Dimethyl-1-Carbomethoxy-l-Propen-
2-yl Phosphate; Duraphos; ENT 22,374; ENT 22374; Fosdrin; Gesfid;  Gestid;
Meniphos; Menite;  Methyl 3-(Dimethoxyphosphinyloxy)Crotonate;  0,0-Dimethyl
l-Carbomethoxy-l-Propen-2-yl Phosphate; 0,0-Dimethyl 0-(l-Methyl-2-
Carboxyvinyl) Phosphate; OS-2046; PD 5; Phosdrin; Phosfene; Phosphoric Acid,
(l-Methoxycarboxypropen-2-yl) Dimethyl Ester; Phosphoric Acid, Dimethyl  Ester,
Ester With Methyl 3-Hydroxycrotonate

Chemical Formula:  C-,H100,P
                    /  U o

Molecular Weight:   224.17


SECTION I  -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   0.1 mg/m3  (NIOSH/OSHA  1978, p.  154)

    ACGIH TLV:   TWA 0.01 ppm,  0.1 mg/m3;  STEL 0.03 ppm,  0.3 mg/m3
    (skin) (*ACGIH 1983)

    IDLH:   40 mg/m3 (NIOSH/OSHA 1978, p. 154)

    Other.Limits  Recommended:  Not Found

-------
                                      CAS Registry Number:  7786-34-7
                                      Page 2  of 4
                             MEVINPHOS


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  223-226°F,  106-107.5°C  at  1 mmHg  (*Merck 1983)

    Specific Gravity (H 0=1):  1.25 at 20°C (*Merck 1983)

    Vapor Pressure (mmHg):  0.0029 at 70°F ('''Spencer 1982)

    Melting Point:  cis isomer 70°F, 21°C;  trans  isomer 44.4°F, 6.9°C
    (Hayes 1982,  p.  356; ^Worthing  1979)

    Vapor Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not  Found

    Solubility  in  Water:  Miscible  (*Merck 1983)

    Appearance and Odor:   Pale yellow to orange liquid (*Spencer 1982),
    with a weak odor  (NIOSH/OSHA 1978, p. 154)


SECTION  III  -- FIRE AND  EXPLOSION HAZARD  DATA

    Flash  Point (Method Used):  175°F (OC)  (''-Clayton and  Clayton  1981-82)
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  Small fires:  use dry chemical, carbon dioxide,
    water  spray or  foam.  Large fires:  use water spray,  fog or foam.   Fight
    fire from  maximum distance.  Dike fire control water for later disposal
    (*DOT  1984).

    Special Fire Fighting Procedures:  Isolate hazard area, stay  upwind;
    ventilate  closed spaces  before entering, wear protective clothing  and
    positive breathing apparatus.  Remove and isolate contaminated clothing
    (*DOT  1984).

    Unusual Fire and Explosion Hazards:  Fire may produce irritating or
    poisonous  gases.  Runoff from fire control may give off poisonous  gases
    and also cause  pollution (*DOT 1984).

-------
                                            CAS Registry Number:  7786-34-7
                                            Page 3 of 4
                             MEVINPHOS
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (*Spencer 1982)

        Conditions to Avoid:  Temperatures above 25-30°C, sources of heat,
        fire,  free flames or spark-generating equipment (*Farm Chemicals
        Handbook,  1984)

    Incompatibility (Materials to Avoid):  Strong oxidizers  (*NIOSH/OSHA
    1978)

    Hazardous Decomposition or Byproducts:   When heated to decomposition,
    it emits toxic fumes of phosphorus oxides (Sax 1984,  p.  639)

    Hazardous Polymerization:   May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes ("Gosselin 1984)
                      Skin:  Yes  (*Gosselin 1984)
                      Ingestion:  Yes (*Gosselin 1984)

    Health Hazards (Acute, Delayed,  and  Chronic):  This material is super
    toxic; the probable  oral  lethal dose for humans is less  than 5  mg/kg, or a
    taste (less than  7 drops) for a 150-lb. person.  It has  direct  and
    immediate effects whether it is swallowed,  inhaled, or absorbed through
    the skin ("Gosselin  1984).

    Signs and  Symptoms of Exposure:  Symptoms  include nausea, vomiting,
    abdominal cramps, diarrhea,  excessive salivation, headache,  giddiness,
    dizziness,  runny  nose, tightness in the chest, blurring and dimming of
    vision, slurrying of speech, twitching of muscles, mental confusion,
    disorientation, difficulty breathing, bluing of skin,  convulsions, coma,
    and death (*Gosselin 1984)

    Medical Conditions Generally Aggravated by Exposure:  Not Found

-------
                                            CAS Registry Number:   7786-34-7
                                            Page 4 of 4
                             MEVINPHOS
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Emergency and First Aid  Procedures:   Move victim to  fresh air; call
    emergency medical care.  If not breathing,  give artificial respiration.
    If breathing  is difficult, give oxygen.  In case of contact with material,
    immediately flush skin or eyes with running water for  at  least 15
    minutes.   Speed in removing material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes at  the site.  Keep
    victim quiet  and maintain normal body temperature.   Effects may be
    delayed;  keep victim  under observation (DOT 1984, Guide 55).
SECTION  VI  --  USE INFORMATION

    Used as  an  insecticide and acaricide on vegetables,  alfalfa, deciduous
    fruits and  nuts  (-SRI).
SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or  Spilled)

    Do not touch spilled material (see Section V, above).  In case of spills,
    stay upwind; keep out of low areas.  Ventilate  closed  areas before
    entering them.  Use water spray to reduce vapors.  Wear positive pressure
    breathing apparatus and special productive clothing  ("DOT 1984).   A
    respirator with an activated carbon gas filter  cartridge may be used
    (-Encyc Occupat Health and Safety 1983).

-------
                                     CAS Registry Number:  7791-12-0
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31.  1985
                                                   Revision:
CHEMICAL IDENTITY -- THALLOUS CHLORIDE

CAS Registry Number:  7791-12-0

Synonyms:  Thallium Chloride; Thallium Chloride (T1C1); Thallium
Monochloride; Thallium (1+)  Chloride; Thallium (I)  Chloride.

Chemical Formula:   T1C1

Molecular  Weight:  239.82


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Soluble Thallium Compounds, as Thallium 0.1 mg/m3 (skin)
    (OSHA  1984, p. 663)

    ACGIH TLV:   Soluble Thallium Compounds TWA 0.1 mg/m3 (Skin)  (ACGIH
    1984,  p.  32)

    IDLH:  Not Found

    Other Limits Recommended:   Occupational exposure to  thallium compounds
    recommended standard 20  mg/m3 (NIOSH/OSHA 1978, p.  178).  Toxicity
    information:  ID   oral  (mouse)  24  rag/kg (*NIOSH/RTECS 1985).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   1328°F, 720°C ('-Weast 1979)

    Specific Gravity (H20=l):  7.0 (*Merck 1976)

    Vapor Pressure (mmHg):   Not Found

    Melting Point:   806°F, 430°C  (*Merck 1976)

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:  Soluble in  260 parts cold water (*Merck 1976)

-------
                                      CAS Registry Number:   7791-12-0
                                      Page 2 of 3
                          THALLOUS CHLORIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Appearance and Odor:  White, crystalline powder  ("Merck 1976); becomes
    violet on  exposure to light (*Hawley 1977).


SECTION  III  --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing Methods:   (Non-Specific  --  Thallium Salts)  Small fires:
    dry chemical,  carbon dioxide,  water spray  or  foam.  Large fires:   water
    spray, fog or foam (DOT 1984,  Guide 53).

    Special Fire  Fighting  Procedures:   (Non-Specific -- Thallium Salts)
    Move container from fire area if you can do so without risk (DOT 1984,
    Guide  53).

    Unusual Fire and Explosion Hazards:   (Non-Specific -- Thallium Salts)
    Fire may produce irritating or poisonous gases  (DOT 1984, Guide 53).  When
    heated to  decomposition, it emits  very  toxic  fumes of chloride and
    thallium  (Sax 1984, p. 2556).


SECTION  IV -- REACTIVITY  DATA

    Stability:  Unstable:  Not Found
                 Stable:   Not  Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials  to Avoid): Thallium(I)  chloride is
    vigorously attacked by cold fluorine (*Bretherick  1979).  A mixture of
    potassium  and thallous chloride produces a weak explosion on impact (*NFPA
    1978).

    Hazardous Decomposition or Byproducts:   Not Found

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  7791-12-0
                                      Page 3  of 3
                           THALLOUS CHLORIDE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (-Venugopal 1978)
                       Skin:   Yes  ("Venugopal  1978)
                       Ingestion:  Yes (*Venugopal 1978)

    Health Hazards  (Acute, Delayed,  and Chronic):   (Non-Specific  --
    Thallium Salts)   Poisonous  if  swallowed.   Inhalation of dust is poisonous
    (DOT 1984, Guide 53).

    Signs and  Symptoms of Exposure:  When large  doses of thallium compounds
    are taken, first symptoms  are  hemorrhage of the GI tract, stomach cramps,
    rapid heartbeat  and headache within the first  12-24 hours.  Other symptoms
    include abdominal pain, vomiting, constipation, and diarrhea.   When
    smaller doses  are taken, the predominant symptoms are tingling sensation
    and unsteadiness in the extremities.  The  tingling sensation is generally
    more severe in the lower limbs and may progress to weakness and muscular
    atrophy (^Clayton and  Clayton  1981-82).  Chronic thallous ion intoxication
    in the first three months  of pregnancy has caused deformities in newborn
    babies.  If intoxication takes place after the third month of pregnancy
    the central nervous system of  the baby  is  damaged (*Venupogal 1978).

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:   (Non-Specific -- Thallium Salts)
    Move victim to fresh air;  call emergency medical care.  Remove and isolate
    contaminated clothing  and  shoes at the site.   In case of contact with
    material,  immediately  flush skin or eyes with  running water for at least
    15 minutes (DOT  1984,  Guide 53).
SECTION  VI  -- USE  INFORMATION

    Used as a catalyst  in chlorinations  ("Merck 1976) and in suntan lamps
    (*Hawley 1977).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    Persons involved  in work with  thallium substances should wear personal
    protective equipment, and  respiratory protective equipment is essential
    where there is the  possibility of dangerous inhalation of airborne dust
    (*Encyc Occupat Health and Safety 1977).   (Non-Specific -- Thallium
    Salts)  Do not touch spilled material; stop leak if you can do so without
    risk.   Small spills:   absorb with sand or  other non-combustible absorbent
    material and place  into containers for later disposal.  Small dry spills:
    with clean shovel place material into clean, dry container and cover; move
    containers from spill area.  Large spills:  dike far ahead of spill for
    later disposal (DOT 1984,  Guide 53).

-------
                                           CAS  Registry Number:  7791-23-3
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- SELENIUM OXYCHLORIDE

CAS Registry  Number:  7791-23-3

Synonyms:  Seleninyl Chloride; Seleninyl dichloride; Selenium chloride
oxide;  Selenium oxydichloride

Chemical Formula:   SeOCl

Molecular  Weight:  165.87


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  TWA 0.2 mg/m3  (as Selenium) (*NIOSH/RTECS 1985)

    ACGIH TLV:  TWA 0.2 mg/m3 (as  Selenium) (*ACGIH 1980)

    IDLH:  100 mg/m3 (as  Selenium) (NIOSH/OSHA  1978, p. 164)

    Other Limits Recommended:  Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   356°F, 180°C (*Merck  1976)

    Specific Gravity (H20=l):   2.44 at 16°C/4°C  (*Merck 1976)

    Vapor Pressure  (mmHg):   1  at 94.6°F, 34.8°C (*Sax  1979)

    Melting Point:   47.3°F,  8.5°C (*Weast 1979)

    Vapor Density (AIR=1):  Not found

    Evaporation  Rate (Butyl acetate=l):  Not found

    Solubility  in Water:   Decomposed by water into hydrochloric acid and
    selenious  acid (*Merck 1976).

    Appearance and  Odor:  Nearly colorless or yellowish  liquid (*Merck
    1976).

-------
                                            CAS Registry Number:   7791-23-3
                                            Page 2 of 3
                        SELENIUM OXYCHLORIDE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  Use dry chemical,  carbon dioxide, water spray,
    or foam for small fires; use water spray, fog,  or  foam  for  large fires
    (-DOT.1984).

    Special  Fire Fighting  Procedures:  Cool containers  that are exposed to
    flames  with water until well after the fire is  out.   Stay upwind; keep out
    of low  areas.  Wear positive pressure breathing apparatus and special
    protective  clothing (*DOT 1984).

    Unusual Fire and Explosion Hazards:  When this material is heated  to
    decomposition, or in contact with acids or acid fumes,  highly toxic
    chloride and selenium fumes are evolved (*Sax 1979).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:  Yes  (*Merck 1976)
                 Stable:

        Conditions to Avoid:  Water, moist air (*Merck 1976)

    Incompatibility (Materials to Avoid):  Decomposed by water  (*Merck
    1976).   Reacts violently with powdered antimony, red  and white phosphorus,
    disilver oxide,  lead oxides, and potassium (*Bretherick 1979).

    Hazardous Decomposition or Byproducts:   Hydrochloric acid and selenious
    acid are produced by reaction with water (*Merck 1976); toxic chloride and
    selenium fumes are  evolved when material is heated to decomposition (*Sax
    1975).

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:   Yes (*DOT 1984)
                      Skin:  Yes  (*DOT 1984)
                      Ingestion:   Yes (*DOT 1984)

-------
                                            CAS Registry Number:   7791-23-3
                                            Page 3 of 3
                        SELENIUM OXYCHLORIDE
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Health Hazards (Acute, Delayed,  and Chronic):  This material is very
    toxic and may cause  death or permanent injury after very short  exposures
    to small quantities  (*Sax 1975).   Inhalation of small  quantities may be
    corrosive and irritating to the respiratory tract ("Patty 1963).   It can
    burn and irritate the  skin and eyes and cause burns when ingested  (*Rumack
    1975 to Present).  Long-term exposure to selenium compounds may be a cause
    of amyotrophic lateral sclerosis in humans (Sax 1984,  pp.  2391-92).

    Signs and Symptoms of Exposure:   Inhalation of this material may cause
    garlic breath odor,  nausea, vomiting, indigestion,  fever,  headache,
    lassitude,  irritability, and unstable blood pressure.   Eye contact can
    cause burns  or irritation (*Friberg 1979).  Ingestion  can produce  burns to
    the mouth,  esophogus,  and stomach.  Skin contact  may produce  severe burns
    (*Rumack 1975 to Present).

    Medical  Conditions Generally Aggravated by Exposure:   Populations at
    special risk include those with a history of dermatitis,  chronic
    bronchitis,  skin allergies, respiratory tract infections,  liver or kidney
    disease, jaundice, or  albuminuria.  Women of child-bearing age  are also
    considered at risk (*Friberg 1979).

    Emergency and First Aid  Procedures:  Move victim to  fresh air; call
    emergency medical care.  If not breathing give artificial respiration.  If
    breathing is difficult give oxygen.  Remove and isolate contaminated
    clothing and shoes at  the site.  In case of contact with material,
    immediately  flush skin and eyes with running water for at least 15 minutes
    (DOT 1984, Guide 59).


SECTION  VI --  USE INFORMATION

    This material is used  as a solvent for many substances, including  metals
    (*Merck 1976) and as a chlorinating agent and resin plasticizer (*Patty
    1963).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    Isolate hazard area.   Stay upwind; keep out of low areas.  Do not  touch
    spilled material.  Wear positive pressure breathing apparatus and  special
    protective clothing.   Small spills:  absorb with sand  or other
    noncombustible absorbent material and place into containers for later
    disposal.  Large spills:  dike spill for later disposal (*DOT 1984).

-------
                                           CAS Registry Number:   7803-51-2
                                           Page 1 of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October 31. 1985
                                                   Revision:
CHEMICAL IDENTITY -- PHOSPHINE

CAS Registry Number:   7803-51-2

Synonyms:  Hydrogen Phosphide; Celphos;  Delicia; Detia; Gas-Ex-B;
Phosphoretted Hydrogen; Phosphorus  Trihydride

Chemical Formula:  PH

Molecular  Weight:  34.00


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   TWA 0.3 ppm (0.4 mg/m3)  (NIOSH/OSHA 1978,  p.  154)

    ACGIH TLV:   TWA 0.3  ppm  (0.4 mg/m3) (ACGIH  1983, p. 29); STEL 1 ppm
    (1 mg/m3) (*ACGIH 1983)

    IDLH:  200 ppm (NIOSH/OSHA 1978, p.  154)

    Other Limits  Recommended:  Allowable tolerance for  residues in
    agricultural  commodities: 0.01  ppm  (*USEPA 1983).  Maximum Air
    Concentration (USSR) 0.1 mg/m3  (Encyc Occupat Health and Safety  1983, p.
    1681).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  -126°F,  -87.7°C (*Merck 1983)

    Specific Gravity (H20=l):   0.746 at -90°C (*Weast 1979)

    Vapor Pressure  (mmHg):  760 at -87.5°C  (Weast 1979,  p.  D-201)

    Melting Point:  -207°F, -133°C  (*Merck 1983)

    Vapor Density (AIR=1):  1.17 (*NFPA  1978)

    Evaporation  Rate (Butyl  acetate=l):  Not Found

    Solubility in  Water:  Slightly soluble (-Merck 1983);  26cc/100mL  at
    17°C (Farm Chemicals Handbook 1984, p. C-47)

-------
                                      CAS Registry Number:  7803-51-2
                                      Page 2 of 4
                               PHOSPHINE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Appearance and Odor:   Colorless gas or liquid (*Weast 1979) with a
    disagreeable,  fishy odor (*Grant 1974); a colorless gas with a
    disagreeable garlic-like odor  (Student 1981, p. 405)
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   1.79% (-Spencer 1982)
        UEL:   Not Found

    Extinguishing Methods:   If material is on fire or involved in  a  fire,
    do not extinguish unless  flow can be stopped; use water in flooding
    quantities  as fog; cool all affected containers with flooding quantities
    of water;  apply water from as far a distance as possible;  solid streams of
    water  may be ineffective; use "alcohol" foam, carbon dioxide or dry
    chemical (Student 1981, p. 405).

    Special  Fire Fighting Procedures:  Wear full protective clothing
    including self-contained  breathing apparatus, rubber gloves, boots,  and
    bands  around legs, arms,  and waist.  No skin surface should be  exposed
    (•••NFPA 1978).  For massive fires in cargo areas, use unmanned hose holders
    or monitor  nozzles.  Move containers from fire area' (DOT 1984,  Guide 18)'.

    Unusual Fire and Explosion Hazards:   Phosphine  is explosively hazardous
    when mixed  with air  (Sax  1984, p. 2012).  The gas is heavier than air and
    may travel  along the ground to an ignition source (DASE 1980, p.  741).
    Container may explode in  heat of fire  (DOT 1984, Guide 18).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes, up to 55°C (''-Spencer 1982)

        Conditions to Avoid:  May become unstable at high temperatures
        (*NFPA  1978).  Reacts violently with air (Sax 1984, p. 2212).

    Incompatibility  (Materials to Avoid):  Reacts violently with:  air;
    boron  trichloride; bromine; chlorine; chlorine monoxide; nitric acid;
    nitric oxide; nitrous oxide; nitrogen trioxide; silver nitrate; nitrous
    acid;  mercuric nitrate; nitrogen trichloride; oxygen;  and (potassium plus
    ammonia) (Sax 1984, p.  2212).

-------
                                      CAS Registry Number:   7803-51-2
                                      Page 3 of 4
                              PHOSPHINE
SECTION  IV --  REACTIVITY DATA (Continued)

    Hazardous Decomposition or Byproducts:   When heated  to  decomposition,
    it emits highly  toxic fumes of phosphorus oxides  (Sax  1984, p. 2212).

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (NIOSH/OSHA 1978,  p.  154)
                      Skin:  No  (*Rumack 1975 to Present)
                      Ingestion:  Yes (-Gosselin 1976)

    Health Hazards  (Acute, Delayed,  and  Chronic):  Phosphine is a super-
    toxic gas with a probable oral lethal dose of 5 mg/kg or 7  drops for a 150
    pound person ("Gosselin 1976).  An air concentration  of  3 ppm  is safe for
    long term exposure,  500 ppm is lethal in 30 minutes,  and a  concentration
    of 1,000 ppm is lethal after a few breaths (*Rumack 1975 to Present).

    Signs and Symptoms of Exposure:  Symptoms may include headache,
    fatigue, burning substernal pain, dizziness,  tremors  and gastrointestinal
    distress.  A cough with green sputum, labored breathing  and pulmonary
    edema may also result.  If the gas is inhaled at  high concentrations,
    convulsions  may ensue  after apparent recovery ("Clayton  and Clayton
    1981-82).

    Medical  Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air; call
    emergency medical care.  If not breathing, give artificial  respiration.
    If breathing is difficult, give oxygen.   Remove and isolate contaminated
    clothing and shoes at  the site.  In case of contact with material
    immediately flush skin or eyes with running water for at least 15
    minutes.  Keep victim  quiet and maintain normal body  temperature.  Effects
    may be delayed; keep victim under observation (DOT 1984, Guide 18).


SECTION  VI --  USE INFORMATION

    Insecticide used for fumigation of animal feed, leaf  stored tobacco, and
    box cars; also used  for rodent control  (*Spencer  1982).   Doping agent for
    solid state electronic components; polymerization initiator,  condensation
    catalyst (*SRI). Aluminum phosphine and magnesium phosphide  are
    registered as pesticides in the U.S.; they produce phosphine
    (USEPA/Pesticide Index 1985).

-------
                                      CAS Registry Number:  7803-51-2
                                      Page 4 of 4
                              PHOSPHINE


SECTION VII -- PRECAUTIONS FOR  SAFE HANDLING AND USE
(Steps to be Taken in Case Material  is Released or Spilled)

    Keep unnecessary people away;  isolate area and deny entry.   Stay upwind
    and keep out of low areas.   Ventilate closed spaces.   Wear  positive
    pressure breathing apparatus and  full protective clothing.   Isolate hazard
    area for one-half mile in all  directions if tank car or truck  is involved
    in fire.  Use water spray to reduce vapors; isolate area  until gas has
    dispersed.  Shut off ignition  sources; no flares, smoking or flames in
    hazard  area.  Stop leak if you can do so without risk (DOT  1984, Guide 18).

-------
                                           CAS Registry Number:   8001-35-2
                                           Page 1 of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- CAMPHECHLOR

CAS Registry Number:  8001-35-2

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 3, p. 786)  Toxaphene;
Agricide Maggot Killer; Alltex;  Alltox; Camphochlor; Camphoclor; Camphophene
Huileux; Chem-Phene; Chlorinated Camphene; Chlorocamphene;  Chlor Chetn T-590;
Compound 3956; Crestoxo; Cristoxo;  Cristoxo 90; ENT 9,735;  Estonox;
Fasco-terpene; Geniphene;  Gy-phene;  Hercules 3956; Hercules Toxaphene;
Kamfochlor;  M 5055; Melipax; Motox;  NCI-C00259; Octachlorocamphene; PCC;
Phenacide;  Phenatox; Polychlorcamphene; Polychlorinated Camphenes;
Polychlorocamphene; Strobane-T;  Synthetic 3956; Toxadust; Toxakil; Toxon 63;
Toxypen; Vertac 90%

Chemical Formula:  C   H  Cl approximate (Hawley 1981, p.  1034)

Molecular Weight:  Unknown


SECTION I  -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   TWA 500 yg/m3  (skin)  (NIOSH/RTECS 1983,  p.  786)

    ACGIH TLV:   TWA  500  ug/m3; STEL 1 mg/m3  (skin)  (NIOSH/RTECS  1983,
    p.  786)

    IDLH:   200 mg/m3  (NIOSH/OSHA 1978, p. 62)

    Other Limits  Recommended:   Not Found


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:  Not  Found

    Specific Gravity (H20=l):  1.65  ('-Worthing 1976)

    Vapor Pressure (mmHg):  0.4 at 25°C  (^Sunshine 1969)

    Melting  Point:  149-194°F, 65-90°C (*Merck 1983)

    Vapor Density (AIR=1):  Not Found

-------
                                            CAS Registry Number:  8001-35-2
                                            Page 2 of 4
                           CAMPHECHLOR
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Evaporation Rate (Butyl  acetate=l):  Not Found

    Solubility  in Water:  3 mg/liter at room temperature  (^Worthing 1979)

    Appearance and Odor:  Yellow, waxy solid with a pleasant piney odor
    (*Merck 1983)


SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  84°F, 29°C  (CC)  (Weiss 1980, p. 874)
    Flammable Limits:
        LEL:   1.1% (Weiss 1980,  p.  874)
        UEL:   6.4% (Weiss 1980,  p.  874)

    Extinguishing  Methods:  Small fires:   dry chemical, carbon dioxide,
    water  spray, or foam.  Large fires:  water spray, fog, or foam (DOT 1984,
    Guide  55).   Water may be ineffective on fire (Weiss  1980, p. 874).

    Special  Fire Fighting Procedures:  Move container from fire area if
    this can be done without risk.  Fight fire from a maximum distance.  Dike
    fire control water for later disposal;  do not  scatter the material.  Wear
    positive pressure breathing apparatus and special protective clothing (DOT
    1984,  Guide 55).

    Unusual Fire and Explosion Hazards:  Container may explode  in heat of
    fire (DOT  1984, Guide 55).  Toxic vapors are generated when heated  (Weiss
    1980,  p. 874).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Yes  (*Merck 1983)
                Stable:

        Conditions to Avoid:  Dehydrochlorinates in the  presence of alkali,
        on prolonged exposure to sunlight,  and at  temperatures above 155°C
        (*Merck 1983).

    Incompatibility  (Materials to Avoid):   Strong oxidizers (NIOSH/OSHA
    1984,  p. 62); corrosive to iron (Merck  1983, p.  9384).

    Hazardous  Decomposition or Byproducts:  Releases hydrochloric acid in
    the presence of alkali, on prolonged exposure  to sunlight, and at
    temperatures above 155°C (*Merck 1983).

-------
                                            CAS Registry Number:   8001-35-2
                                            Page 3 of 4
                           CAMPHECHLOR
SECTION  IV  --  REACTIVITY DATA (Continued)

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SEiCTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (NIOSH/OSHA 1978,  p.  63)
                      Skin:  Yes  (NIOSH/OSHA 1978, p.  63)
                      Ingestion:   Yes (NIOSH/OSHA 1978,  p.  63)

    Health Hazards (Acute,  Delayed,  and  Chronic):  -Camphechlor is extremely
    toxic:  the probable oral lethal dose (human) is 5-50 mg/kg or between 7
    drops  and 1 teaspoonful for 70 kg (150 Ib.)  person  (*Gosselin 1984).

    Signs  and  Symptoms of Exposure:  Acute toxicity is manifested as
    generalized convulsions preceded by cyanosis.  Also  reported is  sudden
    exertional dyspnea (labored breathing),  tachycardia  (rapid heart rate),
    weakness and low blood pressure (Gosselin 1984, p.  III-387).  Lethal doses
    cause  respiratory failure.  Hypersalivation, leg and back muscle spasms,
    nausea,  vomiting, hyperexcitability,  tremors, shivering, clonic
    convulsions,  and tetanic muscular contractions of all skeletal muscles
    have also been  reported (Weiss 1980,  p.  874).

    Medical  Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid  Procedures:  Move victim to fresh air; call
    emergency medical care.  If not breathing,  give artificial respiration.
    If breathing is difficult, give oxygen.   In case of  contact with material,
    immediately flush skin or eyes with running water for at least 15
    minutes.  Speed  in removing material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes  at the site.  Keep
    victim quiet and maintain normal body temperature.   Effects may  be
    delayed; keep victim under observation (DOT 1984, Guide  55).


SECTION  VI -- USE INFORMATION

    Insecticide,  primarily for cotton and early growth  stages of vegetables
    (Hawley 1981, p. 1034).  Also peas, soybeans, peanut, corn, and  wheat.
    Not produced commercially in the U.S. since 1982 (*SRI).  Only registered
    for scabies control on cattle in the U.S. (USEPA/Pesticide Index 1985).

-------
                                            CAS Registry Number:  8001-35-2
                                            Page 4 of 4
                           CAMPHECHLOR
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be Taken in  Case Material is Released or Spilled)

    Keep unnecessary people away; isolate hazard area and deny entry.   Stay
    upwind;  keep  out of  low areas.  Ventilate closed spaces  before entering
    them.  Wear boots, protective gloves, goggles, and positive pressure
    breathing apparatus.  Wash away any material which may have contacted the
    body with copious  amounts of water or soap and water (Student 1981, p.
    504, DOT 1984,  Guide 55).  In case of land spill, dig a pit, pond,  lagoon,
    or holding area to contain the liquid or solid material.  Cover solids
    with a plastic sheet to prevent dissolving in rain or firefighting  water.
    In case  of water spill, if camphechlor is dissolved, apply activated
    carbon at ten times  the spilled amount in region of 10 ppm or greater
    concentration.   Remove trapped material with suction hoses.  Use
    mechanical dredges or-lifts to remove immobilized masses of pollutants  and
    precipitates  (Student 1981, p. 504).

-------
                                           CAS Registry Number:   8023-53-8
                                           Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31, 1985 .
                                                  Revision:
CHEMICAL IDENTITY -- DICHLOROBENZALKONIUM CHLORIDE

CAS Registry  Number:  8023-53-8

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume 1, p. 334)  Ammonium,
Alkyl(C_-C1Q)Dimethyl 3,4-Dichlorobenzyl-,  Chloride; Alkyl(C0H.... to
       o   IB                                              o 1/
C,0H0_)Dimethyl 3,4-Dichlorobenzyl Ammonium Chloride; Tetrosan
 IB J/
Chemical  Formula:   (CQH._ to C10H,7)CQHniCl0N«Cl
                     o  i/     io j/   y  11  £.

Molecular  Weight:  352.7 to 492.8


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  I'D,.-  oral (guinea
    pig)  0.316 rag/kg ('''NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H20=l):  Not  Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:   Soluble (Merck 1983,  p. 443)

    Appearance and Odor:   Crystals (Merck 1983,  p. 443)

-------
                                     CAS Registry Number:   8023-53-8
                                     Page 2 of 4
                   DICHLOROBENZALKONIUM CHLORIDE
SECTION  III  --  FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing  Methods:  Not Found

    Special Fire Fighting  Procedures:   Not Found

    Unusual Fire and Explosion Hazards:   When heated to decomposition,  it
    emits  very toxic fumes of  nitrogen  oxides, chlorides,  and  ammonia (Sax
    1984,  p.  156).


SECTION  IV  --  REACTIVITY  DATA

    Stability:  Unstable:  Not Found
                Stable:  Not  Found

        Conditions to Avoid:  Not  Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated  to decomposition,
    it emits  very toxic fumes  of nitrogen oxides,  ammonia,  and chlorides (Sax
    1984,  p.  156).

    Hazardous Polymerization:  May Occur:  Not Found
                              May Not Occur:  Not Found

        Conditions to Avoid:  Not  Found


SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Not  Found
                      Skin:  Yes  (Gosselin  1984, p. 111-63)
                       Ingestion:  Yes  (Sax 1984,  p. 156)

-------
                                      CAS Registry Number:  8023-53-8
                                      Page 3 of 4
                    DICHLOROBENZALKONIUM CHLORIDE
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Health Hazards (Acute, Delayed,  and Chronic):  This material is
    irritating to  the  skin  (Merck 1983, p. 444).   (Non-Specific  --
    Benzalkonium Chloride/Quaternary Ammonium Germicides)   Ten percent
    concentrated aqueous solutions are irritating to the skin and
    concentrations as  low as 0.1-0.5 percent are irritating to the  eyes and
    mucous membranes.  Ingestion can cause corrosion of upper intestinal
    tract.  Swelling of throat and filling of lungs with fluid (edema) also
    can occur.   Death  can occur due to paralysis of respiratory  muscles or
    circulatory collapse (Gosselin 1984, pp. 111-63-65).

    Signs and  Symptoms of Exposure:   (Non-Specific -- Benzalkonium
    Chloride/Quaternary Ammonium Germicides)  Ingestion causes burning pain in
    the mouth,  throat  and abdomen with spitting of blood;  drooling;  vomiting;
    ulcers in the  mouth and throat; shock; restlessness;  confusion;  weakness;
    apprehension;  muscle weakness; difficulty in breathing; depression; bluing
    of the skin; and death  from shock or asphyxiation (Gosselin  1984, p.
    111-65).

    Medical Conditions Generally Aggravated by Exposure:   Not  Found

    Emergency and First Aid  Procedures:  (Non-Specific -- Benzalkonium
    Chloride/Quaternary Ammonium Germicide)  If concentrated (10% or greater)
    solution is ingested,   patient should swallow a large quantity  of milk,
    egg whites or  gelatin solution.  If breathing is difficult,  give oxygen.
    If material is spilled  on the skin, wash promptly with soap  and water
    (Gosselin 1984, pp. 111-65-66).


SECTION  VI -- USE INFORMATION

    This material  is used  as an antiseptic, germicide,  algicide, sanitizer,
    and deodorant  (Merck 1983, p. 444).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in  Case  Material is Released or Spilled)

    Do not touch spilled material; in case of skin contact, wash promptly with
    soap and water (see Section V above).

-------
                                     CAS Registry Number:   8023-53-8
                                     Page 4 of 4
                   DICHLOROBENZALKONIUM CHLORIDE
COMMENTS:

    Sources searched but no information found:
        ACGIH 1983
        NIOSH/OSHA 1978
        Weast 1979
        DOT 1984
        NFPA 1984
        Student 1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton and Clayton 1981-82
        Arena 1979
        Encyc Occupat Health and Safety 1983
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes 1982
        Physicians' Desk Reference 1985
        Oilman 1985

-------
                                            CAS Registry Number:   8065-48-3
                                            Page 1 of 4
                        EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date:  October  31,  1985
                                                    Revision:
CHEMICAL  IDENTITY --  DEMETON

CAS Registry Number:  8065-48-3

Synonyms:  Phosphorothioic Acid, 0,0-Diethyl 0-(2-(Ethylthio)Ethyl)  Ester
Mixed with 0,0-Diethyl S-(2-(Ethylthio)Ethyl)Ester (7:3);  Systox; 0,0-Diethyl
0 (and S)-2-(Ethylthio)Ethyl  Phosphorothioate Mixture; Phosphorothioic acid,
0,0-diethyl 0-(2-(ethylthio)ethyl) ester, mixed with 0,0-diethyl
S-(2-(ethylthio)ethyl)phosphorothioate; Isosystox; Thioldemeton; BAY  10756;
Bayer 8169; Demeton-0 and Demeton-S; Demox; Diethoxythiophosphoric Acid Ester
of 2-Ethylmercaptoethanol;  E  1059; ENT 17,295; Ethyl Systox;  Mercaptofos;
Mercaptophos;  0,0-Diethyl-2-Ethylmercaptoethyl Thiophosphate; Septox;
Systemox; UVL; 0,0-Diethyl-O-[2-(ethylmercapto)ethyl]Thionophosphate; Dematon;
beta-Ethylmercaptoethyl Diethyl Thionophosphate; Diethoxythiophosphoric Acid
Ester of 2-Ethylmercaptoethanol

Chemical Formula:  CgHig03PS2»CgHig03PS2

Molecular Weight:   258.34


SECTION I  -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA  PEL:   TWA  0.1  mg/m3  (skin) (*NIOSH/RTECS 1985)

    ACGIH  TLV:  TWA 0.01 ppm,  0.1  mg/m3;  STEL 0.03 ppm,  0.3 mg/m3
    (skin)  (*ACGIH 1983)

    IDLH:   20 mg/m3  (*Encyc  Occupat Health and Safety 1983)

    Other  Limits Recommended:  Not Found


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  273°F, 134°C at 2 mmHg (*Merck  1983)

    Specific Gravity  (H 0=1):   1.183 (*Clayton and Clayton 1981-82)
>                      £•
    Vapor  Pressure (mmHg):   2.6  x lo"4 (--Hartley 1983)

    Melting Point:  -13°F, -25°C (NIOSH/OSHA 1978,  p.  78)

-------
                                      CAS Registry Number:  8065-48-3
                                      Page 2 of 4
                             DEMETON


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Vapor Density  (AIR=1):  Heavier than air (*CHRIS 1978)

    Evaporation Rate (Butyl acetate=l):   Not Found

    Solubility  in Water:  Demeton-0:  60 mg/L; Demeton-S:  2 g/L at room
    temperature ('^Worthing  1983)

    Appearance and Odor:  Oily liquid (*Merck 1976); amber color (*0sol
    1980);  sulfur odor  (*ACGIH  1980)


SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  113°F, 45°C (CC)  (solution in combustible
    solvent) (*CHRIS 1978)
    Flammable  Limits:
        LEL:   1% (solution in combustible solvent)  ("CHRIS  1978)
        DEL:   5.3% (solution in combustible solvent) (*CHRIS 1978)

    Extinguishing Methods:  Use dry chemical,  foam,  carbon  dioxide.  Water
    may be  ineffective  (-CHRIS  1978)

    Special  Fire Fighting Procedures:  (Non-Specific -- Organophosphorus
    Pesticide,  Flammable Liquid, n.o.s.)  Wear positive pressure breathing
    apparatus  and special protective clothing.   Move containers from fire
    area.   Dike fire control water for later disposal; do not scatter the
    material.   Cool containers  that are exposed to flames  with water from the
    side until  well after fire  is out.  Withdraw immediately in case of rising
    sound  from  venting safety device or any discoloration of tank due to
    fire.   Isolate  for 1/2  mile in all directions  if tank car or truck is
    involved in fire (DOT 1984, Guide 28).

    Unusual Fire and Explosion Hazards:  May release sulfur oxides and
    phosphoric  acid.  Solvent carrier vapors may travel on ground to ignition
    source  (*CHRIS  1978)


SECTION IV -- REACTIVITY DATA

    Stability:   Unstable:
                Stable:  Yes (*CHRIS 1978)

        Conditions  to Avoid:  Mixtures with water or polar solvents, in
        which  sulfur is  lost to oxygen ("White-Stevens 1971); air and light,
        which  cause hydrolysis  (*Sunshine 1969);  alkaline mixtures and
        oxidizing agents (^Hartley 1983).

-------
                                      CAS Registry Number:  8065-48-3
                                      Page 3 of 4
                             DEMETON
SECTION  IV --  REACTIVITY DATA  (Continued)

    Incompatibility  (Materials to Avoid):  Strong oxidizers  (NIOSH/OSHA
    1978,  p. 78)

    Hazardous Decomposition or Byproducts:  When heated,  it  emits  sulfur
    oxides and phosphoric acid (*CHRIS 1978).

    Hazardous Polymerization:  May Occur:  Not  Found
                               May Not Occur:  Not Found

        Conditions  to Avoid: Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:   Yes  (*Sax 1979)
                      Ingestion:  Yes (*Gosselin 1984)

    Health Hazards  (Acute, Delayed,  and Chronic):  This material is a
    cholinesterase  inhibitor  (*Merck  1983).  It is readily absorbed through
    the skin (*Sax  1979) and  is  extremely toxic.  Probable human lethal oral
    dose is 5-50  mg/kg or  7 drops to  1 teaspoonful for 150 Ib.  person
    (*Gosselin 1984).  Acute  dose is believed to be 12 to  20 mg by  oral route
    (*Sax 1979).

    Signs and Symptoms of Exposure:   Symptoms  include weakness, nausea,
    dizziness,  headache, vomiting, apathy, visual disorders, irregular heart
    beat,  salivation, abdominal  soreness,  diarrhea, depression,  twitching of
    the face and  muscles of the  extremities, sweating, pupil dilation,
    monotonous  speech and  shallow respiration (*Encyc Occupat Health and
    Safety 1983).   Skin  contact  may not be noticed because it has no
    irritating effect (*CHRIS 1978).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:   This material is an
    organophosphorous pesticide  (Buchel 1983, p. 178).  Treatment is as
    follows.  Move  victim  to  fresh air; call emergency medical  care.  If not
    breathing,  give artificial respiration.  If breathing  is difficult, give
    oxygen.  Remove and  isolate  contaminated clothing and  shoes at  the site.
    In case of contact with material, immediately flush skin or eyes with
    running water for at least 15 minutes.  Keep victim quiet and maintain
    normal body temperature.  Effects may be delayed; keep victim under
    observation (DOT 1984, Guide 28).

-------
                                      CAS  Registry  Number:  8065-48-3
                                      Page 4 of 4
                             DEMETON
SECTION  VI  --  USE INFORMATION

    This  material  is used primarily as an agricultural insecticide ("Merck
    1976).

SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING  AND USE
(Steps to be  Taken in Case Material is Released or Spilled)

    Use an organic vapor respirator in confined areas; rubber or latex gloves;
    and splash goggles (*CHRIS 1978).   Spills may be cleaned up by absorbing
    the material in vermiculite, dry sand,  earth, or a similar material
    (*NIOSH/OSHA 1981).  General precautions for organophosphorous pesticides
    are as follows.  Keep unnecessary people away; stay upwind.  Shut off
    ignition  sources; no flares, smoking,  or flames in hazard area.  Do not
    touch spilled material.  Use water spray to reduce vapors.  Take up spills
    with  noncombustible absorbent material.  For large spills, dike far ahead
    (DOT  1984, Guide 28).

-------
                                     CAS Registry Number:  10025-65-7
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY --  PLATINOUS  CHLORIDE

CAS Registry  Number:  10025-65-7

Synonyms:  (NIOSH/RTECS 1983  Synonyms, Volume  3, p. 251)  Platinum
Chloride;  Muriate of Platinum

Chemical Formula:   PtCl.

Molecular Weight:  265.99


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  (Non-Specific  -- Platinum,  Soluble  Salts) 0.002 mg (Pt)/mJ
    (NIOSH/OSHA 1978, p.  158)

    ACGIH TLV:   (Non-Specific --  Platinum, Soluble Salts) 0.002 mg (Pt)/m3
    (ACGIH 1983, p. 29)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LDsn oral  (rat)

    12.87  mg/kg ("NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H20=l):  6.05  (Weast 1980, p. B106)

    Vapor Pressure (mmHg):  Not  Found

    Melting Point:   1078°F,  581°C (Decomposes)  (Weast 1980,  p.  B106)

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:   Very  slightly soluble (Weast 1980, p. B106)

-------
                                     CAS Registry Number:   10025-65-7
                                     Page 2 of 3
                        PLATINOUS CHLORIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Appearance and Odor:   Olive  green hexagonal crystals  (Weast 1980,  p.
    B106);  grayish-green to brown  powder (Merck 1983,  p.  1085); brownish-green
    solid  (Encyc Occupat Health  and  Safety 1983, p.  1724)
SECTION  III  --  FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        DEL:  Not Found

    Extinguishing  Methods:  Not Found

    Special Fire  Fighting Procedures:  Not Found

    Unusual Fire and Explosion Hazards:  When heated to decomposition, it
    emits  toxic  fumes of chlorides and chlorine (Sax 1984, p. 2246).


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:   Not Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition  or Byproducts:  When heated to decomposition,
    it emits  toxic fumes of chlorides and chlorine (Sax  1984, p. 2246).

    Hazardous Polymerization:  May Occur:   Not Found
                              May Not Occur:  Not Found

        Conditions to Avoid:   Not Found


SECTION  V -- HEALTH HAZARD  DATA

    Routes of Entry:   Inhalation:  Not Found
                      Skin:   Not Found
                      Ingestion:  Not Found

-------
                                     CAS  Registry Number:  10025-65-7
                                     Page 3 of 3
                        PLATINOUS CHLORIDE


SECTION V  -- HEALTH HAZARD  DATA (Continued)

    Health Hazards  (Acute, Delayed,  and Chronic):   It is a skin irritant
    (Sax  1984, p. 2246).

    Signs and Symptoms  of Exposure:  Not Found

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emerg°ency and  First Aid Procedures:   Not  Found


SECTION VI  -- USE INFORMATION

    It  is used in platinum salts  (Hawley 1981,  p. 824).


SECTION VII --  PRECAUTIONS FOR SAFE HANDLING  AND USE
(Steps  to be  Taken in Case Material is Released or Spilled)

    Avoid skin contact  (see Section V above).


COMMENTS

    Sources searched but  no information found:
       DOT 1984
       NFPA  1978
       Student 1981
       Weiss 1980
       CHRIS 1978
       Clayton and Clayton 1981-82
       Arena 1979
       Gosselin 1984
       Farm  Chemicals  Handbook 1984
       Hayes 1982
       Doull 1980

-------
                                     CAS Registry Number:   10025-73-7
                                     Page 1 of 3
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- CHROMIC CHLORIDE

CAS Registry Number:   10025-73-7

Synonyms (NIOSH/RTECS 1983 Synonyms,  Volume 1, p. 922):   Chromium (I II)
Chloride;  Chromium Chloride;  Chromium Chloride, Anhydrous; Chromium
Trichloride;  CI 77295; Puratronic  Chromium Chloride; Trichlorochromium

Chemical Formula:   CrCl

Molecular Weight:  158.35


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  (Chromium Metal and Insoluble Salts)  Air:  TWA 1.0 mg/m3
    (NIOSH/OSHA 1978, p. 70)

    ACGIH TLV:   (Chromium  (III)  Compounds, as Chromium)  TWA 0.5 mg/m3
    (ACGIH 1985, p. 14)

    IDLH:  Not Found

    Other Limits Recommended:  Chromium metal and  insoluble salts,  IDLH
    500 mg/m3  (NIOSH/OSHA, 1978, p. 70).  Toxicity information:  LD5Q
    inhalation (mouse) 0.032 mg/liter/2 hours (*NIOSH/RTECS  1985).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Dissociates above  1300°C  (Merck  1983, p.  316)

    Specific Gravity (H20=l):  2.87 (Merck 1983, p.  316)

    Vapor Pressure (mmHg):   Not Found

    Melting Point:   2106°F,  1152°C (Merck 1983,  p. 316)

    Vapor Density (AIR=1):   Not Found

    Evaporation Rate  (Butyl  acetate=l):  Not Found

    Solubility in Water:  Insoluble (Hawley 1981, p.  248);  slightly soluble
    in hot water (Weast 1984, p. B-85).

-------
                                     CAS Registry Number:  10025-73-7
                                     Page 2 of 3
                        CHROMIC CHLORIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Appearance and Odor:  Violet,  lustrous, hexagonal,  crystal scales;
    greasy'feel (Merck 1983, p.  316).
SECTION  III  --  FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing Methods:   Not Found

    Special Fire  Fighting  Procedures:   Not Found

    Unusual Fire and Explosion Hazards:   When heated to decomposition,  it
    emits  toxic  fumes of chlorine  containing compounds (Sax  1984, p. 791).


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Strong  oxidizers (NIOSH/OSHA 1978,  p.  70)

    Incompatibility (Materials to Avoid):  Violent reaction with lithium,
    nitrogen  (Sax 1984, p. 791).

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it emits  toxic fumes of chlorine  containing compounds (Sax 1984, p. 791)

    Hazardous Polymerization:  May Occur:  Not Found
                              May Not Occur:  Not Found

        Conditions to Avoid:  Not  Found
SECTION V  --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (NIOSH/OSHA 1978,  p.  70)
                      Skin:  Yes  (Sax 1984, p. 791)
                      Ingestion:  Yes (Sax 1984,  p.  791)

    Health Hazards (Acute,  Delayed,  and  Chronic):   It displays high dermal
    toxicity, and moderate oral  toxicity (Sax 1984, p.  791).

-------
                                      CAS Registry Number:   10025-73-7
                                      Page 3 of 3
                        CHROMIC CHLORIDE
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Signs and Symptoms of Exposure:   (Non-Specific -- Chromium Metal  and
    Insoluble Salts)   It causes histologic fibrosis  of  the  lungs  (NIOSH/OSHA
    1978,  p.  71).   Signs for exposure to chromic chloride as for other
    chromium  compounds include dermatitis, ulcers of the upper respiratory
    tract  and inflammation of the larynx,  lungs,  gastrointestinal tract, and
    nasal  passages  (Clayton and Clayton 1981-82).

    Medical Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency and First Aid  Procedures:   (Non-Specific -- Chromium Metal
    and Insoluble Salts)  If contact with skin,  wash with soap.  If inhaled,
    give artificial respiration if necessary.  If swallowed, dilute with water
    and induce vomiting  (NIOSH/OSHA 1978,  p.  71).


SEICTION  VI  --  USE INFORMATION

    In chromizing;  in  the manufacture of chromium metal and compounds; as a
    catalyst  for polymerization of olefins and other organic reactions; as a
    textile mordant; in  tanning; in corrosion inhibitors; and as a
    waterproofing agent  (Merck 1983, p. 316).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be  Taken  in  Case Material is Released or Spilled)

    Do not touch spilled mateial.  Avoid inhalation.  Wear  full protective
    clothing  and proper  respiratory protection (see  Section V above).


COMMENTS:

    Sources searched but no information found:
        Weast 1979
        DOT 1984
        NFPA  1984
        Student  1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Arena 1979
        Gosselin 1984
        Buchel 1983
        Farm  Chemicals Handbook 1984
        Hayes 1982
        Physicians' Desk Reference 1985
        Oilman 1985

-------
                                     CAS Registry Number:   10025-87-3
                                     Page  1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- PHOSPHORUS  OXYCHLORIDE

CAS Registry Number:   10025-87-3

Synonyms:  Phosphoric  Chloride; Phosphoric Trichloride;
Phosphoroxychloride; Phosphorus  Chloride; Phosphorus Chloride Oxide;
Phosphorus Oxide Trichloride;  Phosphorus Oxytrichloride;  Phosphoryl Chloride;
Phosphoryl Trichloride;  Trichlorophosphine Oxide; Trichlorophosphorus Oxide

Chemical Formula:   Cl OP

Molecular  Weight:   153.32


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   TWA 0.1  ppm (0.6 mg/m3); STEL  0.5 ppm (3.0 rag/m3)
    (*ACGIH 1980)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LC5Q inhalation

    (rat)  0.3 mg/liter/4 hours (*NIOSH/RTECS 1985)


SECTION  II - PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   223°F,  106°C (*Merck 1976)

    Specific Gravity 01.0=1):  1.645 at 25°C  (*Merck 1976)

    Vapor  Pressure  (mmHg):  40  at 27.3°C (*Sax  1979)

    Melting Point:   34.2°F, 1.25°C  (*Merck 1976)

    Vapor  Density  (AIR=1):  5.3 (*Sax  1979)

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility in Water:   Decomposes in  water (*Hawley 1977);  reacts
    exothermically  with water (Merck 1983, p. 1060)

-------
                                      CAS Registry Number:  10025-87-3
                                      Page 2 of 4
                       PHOSPHORUS OXYCHLORIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Appearance and Odor:  Colorless to light yellow,  oily liquid with a
    pungent,  musty odor  (-CHRIS 1978).
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Flammable
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  Extinguish by smothering with  suitable dry
    chemical.   Use water on combustibles burning in vicinity of  this material
    (*NFPA 1978).  Use dry chemical, carbon dioxide,  or dry sand;  do not use
    water  on material itself; if large quantities  of combustibles  are
    involved,  use water in flooding quantities as  spray and fog; use water
    spray  to absorb vapors; cool all affected containers with flooding
    quantities of water; apply water from as far a distance as possible
    (Student 1981, p. 406).

    Special  Fire Fighting  Procedures:  Avoid breathing vapors; keep
    upwind.   Wear self-contained breathing apparatus.  Avoid bodily contact
    with the material.  Wear boots, protective gloves, and  goggles.  Do not
    handle broken packages without protective equipment." Wash away any
    material which may have contacted the body with copious amounts of water
    or soap and water.  If contact with the material is anticipated, wear full
    protective clothing (Student 1981, p. 406).  Keep unnecessary  people away;
    isolate hazard area and deny entry (DOT 1984,  Guide 39).

    Unusual Fire and Explosion Hazards:  Poisonous,  corrosive,  and
    irritating gases are generated when this material is heated  or is in
    contact with water (Weiss 1980, p. 747).  It may ignite other  combustible
    materials  (wood, paper, oil, etc.).  It reacts violently with  water (DOT
    1984,  Guide 39).
SECTION  IV  --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (Weiss 1980,  p.  747)

        Conditions to Avoid:  Do not store with combustible materials,
        particularly fibrous organic materials, or with electrical or other
        equipment that  can be corroded.  Reacts violently with  moisture  (*NFPA
        1978).

-------
                                      CAS Registry Number:  10025-87-3
                                      Page 3 of 4
                       PHOSPHORUS OXYCHLORIDE
SELCTION  IV --  REACTIVITY DATA  (Continued)

    Incompatibility (Materials to Avoid):  Incompatible with carbon
    disulfide; N,N-dimethylformamide; 2,5-dimethylpyrrole;  2,6-dimethyl-
    pyridine N-oxide;  dimethylsulfoxide; Ferrocene-1,1-dicarboxylic  acid;
    water; and zinc (Sax  1984, p. 2225).

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it emits toxic fumes  of chlorides and oxides  of phosphorus;  it will react
    with water or  steam to produce heat and toxic and corrosive  fumes  (Sax
    1984,  p. 2225).

    Hazardous Polymerization:   May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions to  Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (*Hawley 1977)
                      Skin:  Yes  (Sax 1984, p. 2225)
                      Ingestion:  Yes (*Hawley 1977)

    Health Hazards  (Acute, Delayed,  and  Chronic):  This poison is toxic by
    inhalation and ingestion and is strongly irritating" to skin  and  tissues
    (*Hawley 1977).   It  causes burns of the raucous membranes  of  the  mouth  and
    digestive tract  (*Lefaux 1968), and may be fatal  (BASE 1980,  p.  749).

    Signs and Symptoms of Exposure:  Symptoms include burns and extensive
    reddening of  eyes, pains in throat, coughing,  labored breathing  with a
    shortness of  breath  (*Lefaux 1968), dizziness, headache,  weakness, nausea,
    vomiting, chest  pain,  bronchitis, bronchopneumonia,  pulmonary edema and
    kidney damage (*ACGIH  1980).

    Medical  Conditions Generally Aggravated by Exposure: Not  Found

    Emergency and  First Aid  Procedures:  Move victim to fresh  air, call
    emergency medical care.  If not breathing, give artificial respiration.
    If breathing  is  difficult, give oxygen.  Remove and isolate  contaminated
    clothing and  shoes at  the site.  Speed in removing materials  from skin is
    of extreme importance.  In case of contact with material, immediately
    flush skin or eyes with running water for at least 15 minutes (DOT  1984,
    Guide 39).

-------
                                      CAS Registry Number:  10025-87-3
                                      Page 4 of 4
                       PHOSPHORUS OXYCHLORIDE
SECTION  VI  --  USE  INFORMATION

    It is  used as  a solvent  in cryoscopy  (*Merck 1976); chemical intermediate
    for cresyldiphenyl  phosphate, tricresyl phosphate, triphenylphosphate,  and
    other  cyclic and acylic  phosphate esters; organic chlorinating agent
    (*SRI); manufacture of plasticizers, hydraulic fluids, gasoline additives,
    and fire  retarding  agents; and as a catalyst (*ACGIH 1980).
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to  be Taken in  Case Material is Released or Spilled)

    Wear full protective  clothing, eye protection and positive pressure
    breathing apparatus  (see Section V above).   Keep material out of water
    sources  and sewers; build dikes to contain flow as necessary; use water
    spray  to knock down vapors; do not use water on material itself; and
    neutralize spilled material with crushed limestone,  soda ash, or lime.
    For a  land spill,  dig a pit, pond, lagoon,  or holding area to contain
    liquid or solid material; dike surface flow using soil,  sand bags, foamed
    polyurethane,  or foamed concrete; absorb bulk liquid with fly ash or
    cement powder;  neutralize with agricultural lime (slaked lime),  crushed
    limestone,  or sodium  bicarbonate.  For a water spill, neutralize with
    agricultural  lime  (slaked lime), crushed limestone,  or sodium bicarbonate;
    use mechanical dredges or lifts to remove immobilized masses of  pollutants
    and precipitates;  adjust pH to neutral (pH-7).   For air  spills apply water
    spray  or mist to knock down vapors; vapor knock down* water is corrosive or
    toxic  and should be diked for containment (Student 1981, p.  406).  Stop
    leak if  you can do so without risk.  Do not touch spilled material.   Keep
    combustibles  (wood, paper, oil, etc.) away from spilled  material.  Clean
    up only  under supervision of an expert (DOT 1984, Guide  39).

-------
                                     CAS Registry Number:   10025-97-5
                                     Page 1 of 3
                       EPA CHEMICAL  PROFILE
                                                  INTERIM
                                                  Date: October 31,  1985
                                                  Revision:
CHEMICAL  IDENTITY --  IRIDIUM TETRACHLORIDE

CAS Registry Number:  10025-97-5

Synonyms (NIOSH/RTECS 1983 Synonyms, Volume 2, p.  547):  Iridium(IV)
Chloride; CHawley  1981 Synonym, p.  569):  Iridic Chloride

Chemical Formula:  IrCl.
                      4

Molecular Weight:  334.00


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  LD   oral (rat)

    4.67 mg/kg (*NIOSH/RTECS 1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density  (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not  Found

    Solubility in Water:   Soluble in cold water, decomposes in hot water
    (Weast  1979, p. B-85)

    Appearance and Odor:  Dark brown,  amorphous solid  (Weast 1979, p. B-85)

-------
                                     CAS Registry Number:  10025-97-5
                                     Page 2 of 3
                       IRIDIUM  TETRACHLORIDE


SECTION  III  --  FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        DEL:  Not Found

    Extinguishing  Methods:  Not  Found

    Special Fire  Fighting  Procedures:   Not Found

    Unusual Fire and Explosion Hazards:   Not Found


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials  to  Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:  May Occur:   Not Found
                              May Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V -- HEALTH HAZARD  DATA

    Routes of Entry:   Inhalation:  Not  Found
                      Skin:  Not Found
                      Ingestion:  Not  Found

    Health Hazards (Acute,  Delayed,  and Chronic):   Information on acute
    systemic  toxicity related to  intravenous injection (or other  routes) is
    scant  and based primarily on  animal data for iridium trichloride.  Unlike
    platinum  and osmium, iridium  compounds do not cause irritation of the
    skin,  eyes or respiratory tract  (Clayton and Clayton 1981-82, p. 1853;
    Doull  1980, p. 453).  In humans, the only reports of toxicity are related
    to  radiation injuries due to  accidental exposure to iridium-192  (Encyc
    Occupat Health and Safety 1983, p.  1155).

-------
                                    CAS Registry Number:   10025-97-5
                                    Page 3 of 3
                      IRIDIUM TETRACHLORIDE


SECTION V -- HEALTH HAZARD DATA (Continued)

    Signs and  Symptoms of  Exposure:  Not Found

    Medical Conditions Generally Aggravated by  Exposure:  Not Found

    Emergency and First Aid Procedures:   Not Found


SECTION VI -- USE INFORMATION

    Iridium tetrachloride is used  in chemical analysis,  in microscopy,  and in
    plating solutions  (Kawley 1981, p. 569).


SECTION VII  --  PRECAUTIONS  FOR SAFE HANDLING AND USE
(Steps to be Taken  in  Case Material is Released  or Spilled)

    Not Found

-------
                                     CAS Registry  Number:  10026-13-8
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  PHOSPHORUS PENTACHLORIDE

CAS Registry  Number:  10026-13-8

Synonyms:  Pentachlorophosphorane;  Pentachlorophosphorus; Phosphorane,
Pentachloro-;  Phosphoric  Chloride; Phosphoric  Perchloride; Phosphorous
Pentachloride; Phosphorus  Chloride; Phosphorus Pentachloride,  Solid;
Phosphorus Perchloride; Phosphorus(V) Chloride

Chemical Formula:   PC1.

Molecular  Weight:  208.27


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  1 mg/m1  (NIOSH/OSHA 1978,  p.  154)

    ACGIH TLV:  TWA 0.1 ppm (1.0 mg/m3)  (ACGIH 1983,  p. 29)

    IDLH:  200 mg/m3 (NIOSH/OSHA 1978,  p.  154)

    Other Limits Recommended:  Not  Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   320°F, 160°C (*Merck  1976)

    Specific Gravity (H_0=l):   Not Found

    Vapor Pressure (mmHg):   1  at 55.5°C (*Sax 1975)

    Melting Point:   298°F, 148°C under pressure  (*Merck 1976);  sublimes at
    about  100°C without melting (*Merck 1976)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:   Reacts violently with water  (Sax 1984, p. 2223)

-------
                                      CAS Registry Number:  10026-13-8
                                      Page 2 of 4
                     PHOSPHORUS PENTACHLORIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Appearance and Odor:  Pale yellow solid with an odor like hydrochloric
    acid (NIOSH/OSHA 1978, p. 154); white to pale yellow crystalline with a
    pungent,  unpleasant odor  (*Merck 1976).


SECTION  III  -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  If material is involved  in  fire then use dry
    chemical,  carbon dioxide, or dry sand.  Do not use water on material
    itself.   If large quantities of combustibles are  involved, use water in
    flooding  quantities (i.e., spray or fog), and use water spray to absorb
    vapors (Student  1981, p. 407).

    Special Fire Fighting  Procedures:  Avoid breathing vapors; keep
    upwind.   Wear self-contained breathing apparatus. Avoid bodily contact
    with the  material; wear boots, protective gloves, and goggles (Student
    1981,  p.  407).

    Unusual Fire and Explosion Hazards:   When heated to decomposition,  it
    emits  highly toxic fumes of chlorides and chlorine (see Section IV
    below).   Will react with water or steam to produce heat and toxic and
    corrosive fumes.  Reacts violently with moisture, chlorine trioxide,
    fluorine  hydroxylamine, magnesium oxides, diphosphorus trioxide, sodium
    and potassium (Sax 1984, p. 2223).  Decomposed by water to form hydrogen
    chloride,  phosphoric acids, corrosive materials,  and heat.  This heat may
    be sufficient to ignite surrounding combustible materials  (Student 1981,
    p. 407).


SECTION  IV  -- REACTIVITY DATA

    Stability:   Unstable:  Yes  (*Clayton and Clayton 1981-82)
                 Stable:

        Conditions to Avoid:  Produces phosphorus trichloride  and chlorine
        when  heated  (*Clayton and Clayton  1981-82).

    Incompatibility  (Materials to Avoid):  Water, magnesium oxide,
    chemically active metals:  sodium, potassium; alkalis (NIOSH/OSHA 1978, p.
    154).  Aluminum;  chlorine dioxide; chlorine; diphosphorus trioxide;
    fluorine;  hydroxylamine; magnesium oxide; 3'-methyl-2-nitrobenzanilide;
    nitrobenzene;  sodium; urea; water (Sax 1984, p. 2223).

-------
                                      CAS Registry Number:   10026-13-8
                                      Page 3 of 4
                    PHOSPHORUS PENTACHLORIDE
SECTION  IV  --  REACTIVITY DATA (Continued)

    Hazardous Decomposition or Byproducts:   When  heated to decomposition,
    it emits  highly toxic fumes of chlorides  (Sax  1984, p. 2223).  It is
    decomposed by water to form hydrochloric  and phosphoric acids, corrosive
    materials and heat.  This heat may ignite surrounding combustible material
    (Student  1981, p. 407).

    Hazardous Polymerization:  May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SfiCTION  V --  HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Sax 1984,  p.  2223)
                      Skin:  Yes  (Sax 1984, p. 2223)
                      Ingestion:   Yes (Sax 1984,  p.  2223)

    Health Hazards (Acute,  Delayed,  and  Chronic):  It can cause death due
    to pulmonary edema (Encyc Occupat Health and Safety  1983, p. 1683) or by
    circulatory shock (*Gosselin 1976).

    Signs and  Symptoms of Exposure:  Can cause death by pulmonary edema or
    circulation shock.  Fumes cause irritation of eyes and  respiratory
    passages.   Upon  ingestion, immediate pain in the  mouth  and  throat,
    abdominal pain,  nausea, vomiting of mucoid and "coffee-ground" material,
    intense thirst,  clammy skin, weak and rapid pulse, shallow  respiration,
    and circulatory  shock occur (*Gosselin 1976; Encyc Occupat  Health and
    Safety 1983, p.  1683).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:  Move victim to fresh air; call
    emergency medical care.  If not breathing, give artificial  respiration.
    If breathing is  difficult, give oxygen.  Remove and  isolate contaminated
    clothing and shoes at the site.  Speed in removing material from skin is
    of extreme  importance.  In case of contact with material, immediately
    flush skin  or  eyes with running water for at least  15 minutes.  Keep
    victim quiet and maintain normal body temperature (DOT 1984, Guide 39).

-------
                                      CAS Registry Number:  10026-13-8
                                      Page 4 of 4
                     PHOSPHORUS  PENTACHLORIDE
.SECTION VI -- USE  INFORMATION

    Chlorinating and  dehydrating agent; (Hawley 1981,  p.  811)  catalyst in
    manufacturing of  acetylcellulose and benzotrichloride from benzal
    chloride; dehydrating agent (*SRI).  Also used for converting acids into
    acid chlorides (*Merck 1976).
SECTION VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    Keep material out of water sources and sewers.  Use water spray to knock
    down vapors.   Do not use water on material itself; neutralize spilled
    material with crushed limestone, soda ash, or lime.   Avoid  breathing
    vapors; keep  upwind.  Wear self-contained breathing apparatus.  Avoid
    bodily contact with the material; wear boots, protective gloves, goggles.
    Do not handle broken packages without protective equipment.  Wash away any
    materials which may have contacted the body with copious amounts of water
    or soap and water.  If contact with the material is anticipated, wear full
    protective clothing (Student 1981, p. 407).

-------
                                           CAS Registry Number:   10028-15-6
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- OZONE

CAS Registry Number:   10028-15-6

Synonyms:  Oxygen,  Mol; Triatomic Oxygen

Chemical Formula:  0_

Molecular  Weight:  48.00


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   TWA 0.1 ppm (0.2  mg/m3)  (OSHA 1984, p.  663)

    ACGIH TLV:   TWA 0.1 ppm (0.2 mg/m3);  STEL 0.3 ppm (0.6 mg/m3)
    (*ACGIH  1982)

    IDLH:   10 ppm (NIOSH/OSHA 1978, p. 176)

    Other Limits  Recommended:  Not Found


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  -169.6°F, -111.9°C (*Weast  1979)

    Specific  Gravity (H20=l):  Gas:  2.144 g/liter  at 0°C (*Weast 1979)

    Vapor Pressure  (mmHg):   41,257  (54 atm) at -12°C (BASE  1980, p. 710)

    Melting  Point:  -314°F,  -192.7°C (*Weast 1979)

    Vapor Density (AIR=1):   1.7 (BASE 1980, p. 710)

    Evaporation  Rate (Butyl acetate=l):   Not Found

    Solubility in Water:   49  ml/100 ml  at  0°C (*Weast 1979)

    Appearance and  Odor:   Ozone  is a colorless to bluish gas, a dark blue
    liquid,  or blue-black crystals (*Weast  1979; '-Merck  1976).  It has a
    characteristic odor in concentrations less than 2 ppm  (*Merck 1976).

-------
                                      CAS  Registry  Number:   10028-15-6
                                      Page 2 of 3
                              OZONE
SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:  Not Found

    Extinguishing Methods:  In case of  fire:  keep cylinder cool by
    spraying water  (DASE 1980, p. 710).

    Special  Fire  Fighting  Procedures: Not  Found

    Unusual  Fire and Explosion Hazards:  Severe explosion hazard when
    shocked, exposed to heat or flame, or by chemical reaction with organic
    substances,  especially reducing agents  (*Rumack 1975 to Present).  Ozone
    is a powerful oxidizing agent (*Encyc Occupat Health and Safety 1971).


SECTION  IV --  REACTIVITY  DATA

    Stability: Unstable:   Yes  (*Encyc Occupat Health  and Safety  1971).
                 Stable:

        Conditions to Avoid:   Contact with  organic materials (Hawley 1981,
        p.  769)

    Incompatibility  (Materials to Avoid):  Alkenes; aromatic compounds;
    benzene, rubber; bromine; dicyanogen; diethyl ether; dinitrogen tetroxide;
    hydrogen bromide; 4-hydroxy-4-methyl-l,6-heptadiene; nitrogen trichloride;
    stibine; tetrafluorohydrazine (Sax 1984,  p. 2110).

    Hazardous Decomposition or Byproducts:   Not Found

    Hazardous Polymerization:  May Occur:   Not Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:   Not Found
SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes (*Sax 1979)
                      Skin:  Yes (*Sax 1979)
                      Ingestion:   Not Found

-------
                                      CAS Registry Number:  10028-15-6
                                      Page 3 of 3
                              OZONE
SECTION  V -- HEALTH HAZARD DATA (Continued)

    Health Hazards (Acute, Delayed, and Chronic):   Ozone is  highly  toxic
    via inhalation or  by contact  of  liquid to skin, eyes, or mucous
    membranes.   It is  capable of  causing acute to chronic lung damage, burns,
    and death or permanent injury ("Sax 1979).  Ozone can be toxic at a
    concentration of  100 ppm for  1 minute (*NIOSH/RTECS 1985).  Ozone is
    capable of causing death from pulmonary edema (Doull 1980, p. 619).   It
    increases sensitivity of the  lungs to bronchoconstrictors and allergens
    (*Gilman 1980); increases susceptibility to and severity of lung bacterial
    and viral infections (*ACGIH  1980).

    Signs and Symptoms of Exposure:   Rapid  shallow breathing,  difficulty in
    breathing,  cough,  tightness  in the chest (Oilman 1980, p. 1630) and
    dryness of membranes of nose, throat, and eyes (*ACGIH 1980) have been
    reported.  High concentrations cause severe irritation of eyes and
    respiratory tract, drowsiness, vertigo, nausea, and vomiting (^Rumack 1975
    to Present).   Blood pressure  drop  (hypotension) may occur due to dilation
    of peripheral blood vessels  ("Patty 1963).

    Medical Conditions Generally Aggravated by Exposure:  Ozone increased
    the sensitivity of the lung  to bronchoconstrictors ("Oilman 1980).

    Emergency and First Aid Procedures:  Establish respiration (*Rumack
    1975 to Present)   (Non-Specific  -- Irritating Agent, n.o.s.)  Move victim
    to fresh air, call emergency  medical care.  If not breathing, give
    artificial respiration.  If breathing is difficult, give oxygen.  In case
    of contact with material, immediately flush skin and eyes with running
    water for at least 15 minutes (DOT 1984, Guide 58).


SECTION  VI --  USE INFORMATION

    Disinfectant for air and water;  used for bleaching waxes, textiles and
    oils ("Merck 1976), ozonolysis of unsaturated fatty acids to pelargonic
    and other acids; manufacture  of  ink; catalyst; water treatment for taste
    and odor control;  mold and bacteria inhibitor in cold storage; bleaching
    agent (-SRI).


SECTION  VII --  PRECAUTIONS  FOR SAFE HANDLING  AND  USE
(Steps to be Taken in  Case Material  is Released or Spilled)

    (Non-Specific -- Irritating Agent, n.o.s.)  Isolate area and deny entry.
    Stay upwind;  keep  out of low  areas.  Ventilate closed spaces before
    entering them. Wear positive pressure breathing apparatus and special
    protective clothing (DOT 1984, Guide 58).  Workers handling liquid ozone
    should wear protective equipment designed for exposure to cryogenic
    liquid, for example gloves made  from plastics or asbestos, eye and face
    protection (*Encyc Occupat Health and Safety 1971).

-------
                                    CAS Registry Number:  10031-59-1
                                    Page 1 of 4
                      EPA CHEMICAL PROFILE
                                                 INTERIM
                                                 Date:  October 31, 1985
                                                 Revision:
CHEMICAL  IDENTITY  -- THALLOUS SULFATE

CAS Registry Number:  10031-59-1

Synonyms:   (NIOSH/RTECS 1983 SYNONYMS,  VOLUME 3, p. 706)  Thallium
Sulfate; Ratox;  Sulfuric Acid, Thallium Salt;  Zelio

Chemical Formula:  T1(SO.)
                       *T X

Molecular Weight:


SECTION I  -- HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   Air:  TWA 0.1 mg (Tl)/m3 (skin)  (NIOSH/RTECS 1983,
    Volume 3, p. 706)

    ACGIH  TLV:  TWA 0.1 mg  (Tl)/m3 (skin) (NIOSH/RTECS  1983, Volume 3,
    p.  706)

    IDLH:   Not  Found

    Other Limits Recommended:   Toxicity information:  LD^   oral (human)
    7 mg/kg  (^NIOSH/RTECS 1985)


SECTION II  --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:  Not Found

    Specific Gravity (H 0=1):   Not Found

    Vapor Pressure (mmHg):   Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):   Not Found

    Evaporation Rate (Butyl acetate=l):   Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:  Not Found

-------
                                      CAS Registry Number:   10031-59-1
                                      Page 2 of 4
                          THALLOUS SULFATE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:   (Non-Specific -- Thallium Salts,  n.o.s.)   If
    material is involved  in fire, extinguish fire using agent suitable for
    type of surrounding fire (material  itself does not burn or burns with
    difficulty).   Use water in  flooding quantities as fog.  Use foam,  carbon
    dioxide or dry chemical (Student  1981, p. 497).  For small fires use dry
    chemical,  carbon dioxide, water spray, or foam.  For large fires use water
    spray, fog, or foam.  Move  container from fire area if you can do so
    without risk (DOT  1984,  Guide 53).

    Special  Fire Fighting Procedures:   (Non-Specific -- Thallium Salts,
    n.o.s.)  For personnel  protection avoid breathing dusts, and fumes from
    burning material.  Keep upwind.  Avoid bodily contact with the material.
    Wear boots, protective  gloves, and  goggles.  Do not handle broken packages
    without protective equipment.  Wash away any material which may have
    contacted the body with copious amounts of water or soap and water..  Wear
    self-contained breathing apparatus  when fighting fires involving this
    material.   If contact with  the material is anticipated, wear full
    protective clothing  (Student 1981,  p. 497).  Keep unnecessary people away;
    isolate hazard area and deny entry.  Stay upwind; keep out of low areas.
    Wear self-contained  (positive pressure if available) breathing apparatus
    and full protective clothing (DOT 1984, Guide 53).

    Unusual Fire and Explosion Hazards:   When  heated to  decomposition,  it
    emits  very toxic fumes  of thallium  and sulfur oxide (Sax 1984, p.  2557).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid: Not Found

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous  Decomposition or Byproducts:  When heated to decomposition,
    it emits very toxic fumes of thallium and sulfur oxides (Sax 1984, p.
    2557).

-------
                                      CAS Registry Number:   10031-59-1
                                      Page 3 of 4
                         THALLOUS  SULFATE
SECTION  IV  --  REACTIVITY DATA

    Hazardous Polymerization:   May Occur:  Not Found
                               May  Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:   Not Found
                      Skin:  Not Found
                      Ingestion:   Yes (Sax 1984, p. 2557)

    Health Hazards (Acute, Delayed,  and Chronic):  A dangerous, highly
    toxic  metal salt.  Its main hazard is  as a chronic poison due to its
    accumulation,  especially in liver, brain, and skeletal muscle.  Fatal
    human  dose is  about  500 mg of thallium.  Many reported fatalities  (Sax
    1984,  p.  2557).

    Signs  and  Symptoms of Exposure:  A dangerous, highly toxic metal salt.
    Ingestion causes abdominal pain, vomiting, trembling, convulsions,
    paralysis,  shortness of breath, collapse, and death  (Sax 1984, p.  2557).

    Medical Conditions Generally Aggravated by Exposure:  Not  Found

    Emergency and First Aid  Procedures:   (Non-Specific -- Thallium Salts,
    n.o.s.)   Move  victim to fresh air; call emergency medical care.  Remove
    and isolate contaminated clothing and  shoes at  the site.  In case  of
    contact with material, immediately flush skin or eyes with  running water
    for at least 15  minutes (DOT 1984, Guide 53).
SECTION  VI  --  USE INFORMATION

    Rodenticide  (Sax 1984, p. 2557).  Used for control  of  rats, moles and
    house mice (Farm Chemicals Handbook 1984,  p.  C-223).   Not registered as a
    pesticide in the U.S.  (USEPA/Pesticide Index 1985).

-------
                                      CAS Registry Number:  10031-59-1
                                      Page 4 of 4
                         THALLOUS SULFATE


SECTION  VU  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    (Non-Specific --  Thallium Salts, n.o.s.)  Do not touch spilled material;
    stop leak if  you  can do so without risk.  Small spills:   absorb with sand
    or other noncombustible absorbent material and place into containers for
    later disposal.   Small dry spills:  with clean shovel place material into
    clean, dry container and cover; move containers from spill area.  Large
    spills:   dike far ahead of spill for later disposal.   Keep unnecessary
    people away;  isolate hazard area and deny entry.  Stay upwind; keep out of
    low areas.  Wear  self-contained (positive pressure if available) breathing
    apparatus and full protective clothing (DOT 1984, Guide 53).


COMMENTS

    Sources  searched  but no information found:
        Hawley 1981
        Weast 1979
        Merck 1983
        NFPA 1984
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton and Clayton 1981-82
        Arena 1979
        Encyc Occupat Health and Safety 1983
        Buchel 1983
        Hayes 1982

-------
                                     CAS Registry Number:   10049-07-7
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- RHODIUM  TRICHLORIDE

CAS Registry Number:  10049-07-7

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 3,  p.  552)  Rhodium (III)
Chloride (1:3); Rhodium Chloride
Chemical Formula:

Molecular Weight:  209.26


SECTION I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  0.1 mg (Rhodium)/m3 (OSHA 1984,  p.  663)

    ACGIH TLV:  TWA  1 mg (Rhodium)/m3  (NIOSH/RTECS 1983, Volume 3, p. 552)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LDcn  oral  (rat)

    6.22 mg/kg (*NIOSH/RTECS 1985).


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   1472°F, 800°C,  sublimes (Weast 1979,  p. B-117) (SUSPECT)

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure (mmHg) :   Not Found

    Melting Point:   Decomposes at 842-932°F, 450-500°C (Weast 1979,  p.
    B-117)  (SUSPECT)

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility in  Water:  Insoluble  (Merck 1983,  p.  1181)

    Appearance and Odor:  Brown-red powder;  deliquescent (Weast 1979,  p.
    B-117).

-------
                                      CAS  Registry Number:   10049-07-7
                                      Page 2 of 3
                       RHODIUM TRICHLORIDE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  Not Found

    Special  Fire Fighting  Procedures:   Not Found

    Unusual Fire and Explosion Hazards:  When heated to decomposition, it
    emits  toxic fumes of chlorine containing compounds  (Sax 1984, p.  2367).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:   Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Incompatible with pentacarbonyl
    iron and zinc (Sax  1984, p. 2367).

    Hazardous  Decomposition or Byproducts:   When heated to decomposition,
    it emits toxic fumes of chlorine containing compounds (Sax 1984,  p.  2367)

    Hazardous  Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes (Hydrated Rhodium Trichloride)
                                  (NIOSH/OSHA  1978, p. 162-163)
                      Skin:  Yes (Hydrated Rhodium Trichloride)
                             (NIOSH/OSHA 1978, p.  162-163)
                      Ingestion:   Yes (Hydrated Rhodium Trichloride)
                                  (NIOSH/OSHA  1978, p. 162-163)

    Health Hazards (Acute,  Delayed, and Chronic):   Target organ for
    hydrated rhodium trichloride is the eyes  (NIOSH/OSHA  1978, p. 162-163)
    It is  a mutagen and an experimental carcinogen  (Sax 1984, p. 2367).

-------
                                      CAS  Registry  Number:   10049-07-7
                                      Page 3 of 3
                       RHODIUM TRICHLORIDE
SECTION  V -- HEALTH HAZARD DATA (Continued)

    Signs and Symptoms of Exposure:  For hydrated rhodium trichloride, mild
    eye irritation  (NIOSH/OSHA 1978, p. 163).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:   For  hydrated rhodium trichloride,
    irrigate  eyes;  flush skin with water.   If inhaled in large amounts,  move
    exposed person  to fresh air at once;  if breathing has stopped,  perform
    artificial respiration; keep the affected person warm and at rest;  get
    medical attention as soon as possible.  If  swallowed and the person is
    conscious,  immediately give large quantities of water, after which  try  to
    get the person  to vomit by having him touch the back of his throat  with
    his finger.  Do not make an unconscious person vomit (NIOSH/OSHA 1978,  p.
    163).
SECTION  VI  --  USE INFORMATION

    Not Found
SECTION  VII -- PRECAUTIONS FOR SAFE  HANDLING  AND USE
(Steps to  be Taken in Case Material is  Released or Spilled)

    Do not touch spilled material.   Wear full protective clothing, eye
    protection  and positive pressure breathing apparatus (see Section V above)


COMMENTS

    Sources searched but no information found:
        Weiss 1980
        DOT 1984
        Student 1981
        Gosselin 1984
        NFPA 1984
        DASE 1980
        Clayton and Clayton 1981-82
        Encyc Occupat Health and Safety 1983
        Farm Chemicals Handbook 1984
        Doull 1980

-------
                                      CAS Registry Number:  10102-18-8
                                      Page 1  of 3
                       EPA CHEMICAL  PROFILE
                                                   Date:  October 9, 1985
                                                   Revision:
CHEMICAL IDENTITY -- SODIUM SELENITE

CAS Registry Number:   10102-18-8

Synonyms:  Selenious Acid, Disodium Salt; Disodium Selenite; Disodium
Selenium Trioxide; Sodium Selenium  Oxide  [Na SeO.]; Sodium Selenite;
selenious acid  (H.SeCL), Disodium Salt

Chemical Formula:  Na 0 Se

Molecular Weight:  172.92


SECTION I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Air:   (TWA) 200 vg (Se)/m3 (*NIOSH/RTECS 1985)

    ACGIH TLV:   (TWA)  0.2 mg/m3  (Selenium compounds) (*ACGIH 1983)

    IDLH:  Not Found

    Other Limits  Recommended:   Toxicity information:  LD,   oral
    (domestic animal) 3 rag/kg (*NIOSH/RTECS 1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H  0=1):  Not  Found

    Vapor Pressure  (mmHg):   Not Found

    Melting Point:  Not  Found

    Vapor Density (AIR=1):   Not Found

    Evaporation Rate (Butyl acetate=l):  Not  Found

    Solubility in Water:   Freely soluble in water (*Merck 1983).   Soluble
    in water  to form a slightly alkaline  solution/pentahydrate  (*Clayton and
    Clayton 1982).

    Appearance and  Odor:  Tetragonal  prisms  (*Merck 1983).  White crystals
    (Sax 1984,  p. 2451).

-------
                                      CAS Registry Number:   10102-18-8
                                      Page 2 of 3
                         SODIUM SELENITE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used): -Not Found
    Flammable Limits:
         LEL:  Not Found
         UEL:  Not Found

    Extinguishing Methods:  Small fires:   dry  chemical carbon dioxide,
    water  spray,  or foam.  Large fires:  water  spray, fog, or foam (*DOT 1984)

    Special  Fire Fighting Procedures:  Not Found

    Unusual Fire and Explosion Hazards:  May burn but  will  not  ignite
    readily (*DOT 1984).  When heated to decomposition, may  emit toxic fumes
    of selenium and sodium oxide (Sax 1984, p.  2541).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes.  Stable in air (-Merck 1983).

         Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not Found

    Hazardous  Decomposition or Byproducts:  When heated to decomposition it
    emits  toxic fumes of selenium and sodium oxide (Sax 1984, p. 2451).

    Hazardous  Polymerization:  May Occur:  Not Found
                               May  Not  Occur:

        Conditions to Avoid:  Not Found
SECTION  V --  HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:   Yes (Sax 1984,  p.  2451)
                      Skin:  Not Found
                      Ingestion:   Yes (Hawley  1981,  p. 951)

    Health Hazards (Acute,  Delayed,  and Chronic):  Toxic by ingestion
    (Hawley 1981, p. 951).  In humans, a concentration of 5 ppm in food or 0.5
    ppm in milk or water has been estimated to  be  dangerous (selenium
    compounds)  ("Clarke  1981).  Elemental  selenium has low acute systemic
    toxicity, but dust or fumes can cause  serious  irritation of the
    respiratory tract (non-specific selenium compounds)  (Sax 1984, p. 2390).

-------
                                      CAS Registry Number:   10102-18-8
                                      Page 3 of 3
                         SODIUM SELENITE
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Signs and Symptoms of Exposure:   (Non-Specific -- Selenium Compounds)
    Garlic odor  of breath is a common symptom.   Pallor, nervousness,
    depression,  and digestive disturbances have been reported  in  cases of
    chronic exposure  (Sax 1984, p. 2390).

    Medical  Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency and First Aid  Procedures:   Isolate hazard area and deny
    entry.   Stay upwind; keep out of low areas.  Wear self-contained (positive
    pressure if  available) breathing apparatus  and full protective clothing.
    Move victim  to fresh air; call emergency  medical care.  Remove and isolate
    contaminated clothing and shoes at the site.   In case of contact with
    material,  immediately flush skin or eyes  with running water for at least
    15 minutes (*DOT  1984).
SECTION  VI  --  USE INFORMATION

    Removing  green  color from glass during its manufacture;  alkaloidal reagent
    (*Merck 1983);  reagent in bacteriology; testing germinaton of seeds;
    decorating porcelain (*Hawley 1981).   Livestock feed  additive ('"Peer
    Review Committee).
SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or Spilled)

    Avoid  breathing dust.  Wear proper respiratory protection  (see Section V
    above).  Small  spills:  absorb with sand or other non-combustible
    absorbent  material and place into containers for later disposal.  Small
    dry spills:  shovel material into clean, dry container and cover.  Large
    spills:  dike far ahead of spill for later disposal  (*DOT  1984).

-------
                                     CAS Registry Number:  10102-20-2
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  SODIUM TELLURITE

CAS Registry Number:  10102-20-2

Synonyms:  (NIOSH/RTECS 1983  Synonyms, Volume 3, p. 686):  Telluric
Acid,  Disodium Salt; Sodium Tellurate (IV);  Tellurous Acid,  Disodium Salt

Chemical Formula:   Na TeO

Molecular Weight:  221.58


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  TWA 100  yg (Tellurium)/m3  (NIOSH/RTECS 1983,  Volume 3,
    p.  686).

    ACGIH TLV:  TWA 100 yg (Tellurium)/m3 (NIOSH/RTECS  1983, Volume  3,
    p.  686).

    IDLH:  Not Found

    Other Limits Recommended: Toxicity information:   LD..  oral  (human)
    30 mg/kg; LD5Q oral  (mouse) 20 mg/kg (*NIOSH/RTECS 1985).


SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility in Water:   Soluble  in water (Merck 1983, p. 1242)

    Appearance and Odor:   White crystals  (Weast 1979, p. B-129)

-------
                                      CAS Registry Number:   10102-20-2
                                      Page 2 of 3
                        SODIUM TELLURITE


SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  Not Found

    Special  Fire Fighting  Procedures:   Not Found

    Unusual Fire and Explosion Hazards:  Not Found


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:   Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not  Found

    Hazardous  Decomposition or Byproducts:   When heated to decomposition,
    it emits toxic fumes of tellurium and sodium monoxide (Sax 1984, p. 2454).

    Hazardous  Polymerization:   May Occur:  Not Found
                               May Not  Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V --  HEALTH HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Non-Specific  -- Tellurium,
                                  Compounds)  (NIOSH/OSHA 1978, p. 173)
                      Skin:  Yes  (Sax 1984,  p. 2454)
                      Ingestion:   Yes (Sax 1984, p.  2454)

    Health Hazards (Acute, Delayed, and  Chronic):  The material  is  both  an
    oral and dermal toxic hazard (Sax 1984, p.  2454).  The material is toxic
    by ingestion (Hawley 1981, p. 953).  (Non-Specific -- Tellurium
    Compounds)   Oral ingestion of tellurium compounds is generally regarded as
    extremely toxic.  The probable oral lethal dose  is 5-50 mg/kg or between 7
    drops  and 1 teaspoonful for a 70 kg (150 pound) person.  Tellurium
    compounds are regarded as super toxic for  skin exposures (Gosselin 1976,
    p. 90).

-------
                                      CAS  Registry  Number:   10102-20-2
                                      Page 3 of 3
                        SODIUM TELLURITE
SECTION  V -- HEALTH HAZARD DATA (Continued)

    Signs and Symptoms of Exposure:  (Non-Specific --  Tellurium)  Symptoms
    include garlic odor of the breath and a metallic taste in the mouth,
    drowsiness,  and a loss of appetite (Encyc  Occupat Health and Safety 1983,
    p.  2156).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:   (Non-Specific -- Tellurium
    Compounds)   Eyes:  irrigate immediately.   Skin:  wash with soap and water
    immediately.  If breathed in large amounts,  move to fresh air, perform
    artificial  respiration if necessary;  keep  person warm and at rest.   If
    swallowed  and person is conscious, give large amounts of water and try to
    get the person to vomit by having him touch the back of his throat with
    his finger  (NIOSH/OSHA 1978, p.  173).
SECTION  VI  --  USE INFORMATION

    Sodium tellurite is used in bacteriology  and medicine (Hawley 1981,  p.
    953).
SECTION  VII -- PRECAUTIONS FOR SAFE  HANDLING  AND USE
(Steps to  be  Taken  in Case Material is Released or Spilled)

    Avoid  inhalation and skin contact.  Wear proper respiratory protection and
    protective  clothing (see Section V above).


COMMENTS

    Sources searched but no information found:
        DOT 1984
        Student 1981
        Weiss 1980
        BASE  1980
        NFPA  1984
        CHRIS 1978

-------
                                     CAS Registry Number:   10102-43-9
                                     Page  1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- NITRIC OXIDE

CAS Registry Number:   10102-43-9

Synonyms:  Mononitrogen Monoxide; Nitrogen Monoxide; Nitrogen Oxide

Chemical Formula:   NO

Molecular  Weight:  30.01


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Air:  TWA 25 ppm (*NIOSH/RTECS 1985)

    ACGIH TLV:   TWA 25 ppm, 30 mg/m3; STEL 35 ppm, 45 mg/m3 (*ACGIH
    1980)

    IDLH:  100 ppm (NIOSH/OSHA  1978, pp. 138-139)

    Other Limits Recommended:   Occupational exposure  to oxides of nitrogen
    recommended standard - Air:   TWA  25 ppm  (*NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   -241.1°F, -151.7°C (*Merck 1976)

    Specific Gravity (H20=l):  1.27 at -150.2°C (*Merck 1976)

    Vapor Pressure (mmHg):  26,000 at  20°C  (*ACGIH 1980)

    Melting Point:   -262.5°F, -163.6°C (*Merck 1976)

    Vapor Density (AIR=1):   1.04 (*Merck 1976)

    Evaporation  Rate  (Butyl  acetate=l):  Not Found

    Solubility in Water:   7.34 mL/100  mL at  0°C (*Weast  1979)

    Appearance and Odor:  Colorless gas;  deep blue when  liquid;
    bluish-white snow when solid (*Merck  1976).  Colorless  gas with sharp,
    sweet  odor; brown at high concentrations  in air (NIOSH/OSHA  1978, pp.
    138-139).

-------
                                      CAS Registry Number:   10102-43-9
                                      Page 2 of 4
                             NITRIC  OXIDE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  For small  fires, use dry chemical or carbon
    dioxide.   For large  fires,  use water spray,  fog, or foam  (DOT 1984, Guide
    20).

    Special Fire Fighting Procedures:   Wear positive pressure breathing
    apparatus  and full protective clothing.  Move container from fire area if
    you can do so without risk.  Stay away from  ends of tanks.  Spray cooling
    water  on containers  that  are exposed to flames until well after fire is
    out.   For  massive  fire  in  cargo area, use unmanned hose holder or monitor
    nozzles;  if this is  impossible, withdraw from area and let fire burn (DOT
    1984,  Guide 20).

    Unusual Fire and Explosion Hazards:   Burns only when heated with
    hydrogen (*Merck 1976).  With carbon disulfide,  it reacts explosively with
    emission of light.  When mixed with chlorine monoxide, can be explosive.
    Explodes  on contact with nitrogen trichloride.  When mixed with ozone, it
    will  explode (*NFPA  1978).  Will react with water or steam to produce heat
    and corrosive fumes.  Reacts vigorously with reducing materials.  When
    heated to  decomposition, highly toxic fumes  of nitrogen oxides are emitted
    (*Sax  1975).  May  ignite other combustible materials (wood, paper, oil,
    etc.).   Mixture with  fuels  may explode.  Container may explode in heat of
    fire.   Vapor explosion  and  poison hazard indoors, outdoors or in sewers
    (DOT  1984, Guide 20).


SECTION  IV  -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes  (*Sax 1975)

        Conditions to Avoid:   Storage  in direct sunlight, or  areas of high
        fire hazard  (*Sax 1975).

    Incompatibility (Materials  to Avoid):  Aluminum,  boron, carbon
    disulfide, hypochlorite,  chromium,  fluorine, fuels, hydrocarbons, nitrogen
    trichloride, ozone,  phosphorus, uns-dimethyl hydrazine, uranium, acetic
    anhydride, ammonia,  barium  oxide, boron trichloride, methyl chloride,
    1,2-dichloroethane,  dichloroethylene, ethylene,  iron, magnesium, manganese,
    olefins,  potassium,  propylene, sodium, sulfur, trichloroethylene, 1,1,1-
    trichloroethane, uns-tetrachloroethane (Sax  1984, p. 2004); and reducing
    agents (*Sax 1975).

-------
                                      CAS Registry Number:  10102-43-9
                                      Page 3 of 4
                            NITRIC OXIDE
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    highly toxic fumes of .nitrogen oxides are emitted.   Reacts  with water  or
    steam to produce  heat and corrosive fumes (*Sax 1975).   Reacts  with  oxygen
    to form poisonous nitrogen dioxide (Student 1981,  p. 368).

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (-Sax 1975)
                      Skin:   Yes  (NIOSH/OSHA 1978, p. 138)
                      Ingestion:  Yes (NIOSH/OSHA 1978,  p.  138)

    Health Hazards  (Acute, Delayed,  and  Chronic):   Can cause death or
    permanent injury after a very short exposure to small quantities  ("Sax
    1975).  Irritant of  eyes,  nose, throat; can cause unconsciousness
    (NIOSH/OSHA 1978,  pp.  138-139).  Nitric oxide forms  acids  in the
    respiratory system which are irritating and cause congestion in the
    lungs.  Concentrations of  60-150 ppm cause immediate irritation of the
    nose and throat  with coughing and burning in the throat and chest. 6-24
    hours  after exposure,  labored breathing and unconsciousness may result.
    Concentrations of 100-150  ppm are dangerous for short exposure of  30-60
    minutes.   Concentrations of  200-700 ppm may be fatal after  very short
    exposure (Sax 1984,  p. 2004).

    Signs and  Symptoms of Exposure:  Can cause  death due to blockage of gas
    exchange in lungs.   Initially, symptoms include slight coughing,  fatigue
    and nausea at high concentrations, coughing, choking, headache, nausea,
    abdominal pain and shortness of breath are seen.  Latent symptoms  are
    uneasiness, restlessness,  rapid and shallow breathing, bluing of  skin,
    lips and fingernail  beds,  anxiety, mental confusion,  and finally  loss of
    consciousness (*Gosselin 1976).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Move victim to fresh air;  call
    emergency medical care.  If  not breathing, give artificial  respiration.
    If breathing is  difficult  give oxygen.  Remove and isolate  contaminated
    clothing and shoes at  the  site.  In case of contact with material,
    immediately flush skin or  eyes with running water for at least 15
    minutes.   Keep victim  quiet  and maintain normal body temperature.  Effects
    may be delayed;  keep victim  under observation (DOT 1984, Guide 20).

-------
                                      CAS Registry Number:   10102-43-9
                                      Page 4 of 4
                            NITRIC OXIDE
SECTION  VI  --  USE INFORMATION

    Manufacturing of nitric acid, in bleaching  of  rayon, stabilizer for
    propylene, methyl ether (*Merck 1976),  to prepare nitrosyl carbonyls
    (*Hawley  1977).
SECTION  VII -- PRECAUTIONS FOR SAFE  HANDLING AND USE
(Steps to  be Taken in Case Material is Released or Spilled)

    Keep unnecessary people away; isolate hazard  area  and deny entry.   Stay
    upwind; keep out of low areas.  Ventilate  closed  spaces before entering
    them.  Wear positive pressure breathing apparatus  and full protective
    clothing.  For small spills, evacuate for  90  feet  in all directions;  for
    large  spills, first isolate for 180 feet in all directions and then
    evacuate in a downwind direction an area of 0.4 miles wide and 0.6 miles
    long.  Keep combustibles (wood, paper,  oil, etc.)  away from spilled
    material.  Stop leak if you can do so without risk.  Isolate area until
    gas has dispersed (DOT 1984, Guide 20).

-------
                                           CAS Registry Number:   10102-44-0
                                           Page 1 of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- NITROGEN DIOXIDE

CAS Registry Number:   10102-44-0

Synonyms:  Nitrito;  Nitro; Nitrogen Dioxide (liquid); Nitrogen Oxide
(N09);  Nitrogen Peroxide; Nitrogen Tetroxide

Chemical Formula:   NO.

Molecular  Weight:  46.01


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Ceiling 5 ppm (9  mg/m3)  (OSHA 1984, p.  663)

    ACGIH TLV:   TWA 3  ppm (6 mg/m3);  STEL 5 ppm  (10 mg/m3) (*ACGIH  1982)

    IDLH:  50 ppm (NIOSH/OSHA 1978, p. 140)

    Other Limits Recommended: Occupational exposure to  oxides of nitrogen
    recommended standard - Air:   ceiling  concentration 1  ppm (*NIOSH/RTECS
    1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   70.07°F, 21.15°C (*Merck 1976)

    Specific Gravity (H20=l):   1.448 at 20°C/4°C  (*Merck  1976)

    Vapor Pressure (mmHg):  720  at 20°C  (*NIOSH/OSHA 1978,  p.  140)

    Melting Point:   15.3°F,  -9.3°C  (*Merck 1976)

    Vapor Density (AIR=1):  1.58  (*Merck 1976)

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Soluble;  decomposes (Weast 1980, p.  B-103)

    Appearance and Odor:  Colorless solid, yellow liquid (*Weast 1979).
    Reddish-brown  gas, liquid below 21.15°C, has an irritating  odor (*Merck
    1976).

-------
                                      CAS Registry Number:  10102-44-0
                                      Page 2  of 4
                         NITROGEN  DIOXIDE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:  Does not burn  (*Merck 1983)
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  Extinguish with dry chemical,  carbon  dioxide,
    water  spray,  fog, or  foam.  For massive fire in cargo area,  use unmanned
    hose holder or monitor  nozzles; if  this is impossible,  withdraw from area
    and let fire burn  (DOT  1984, Guide  20).

    Special  Fire Fighting Procedures:   Move container from fire  area if  you
    can do so without risk.   Stay away  from ends of tanks.   Spray  cooling
    water  on containers that  are exposed to flames until well after fire is
    out (DOT 1984, Guide  20).

    Unusual  Fire and Explosion Hazards:   When heated to decomposition,
    toxic  fumes of nitrogen oxides are  emitted (Sax 1984, p.  2023).   May
    ignite other combustible  materials  (wood, paper, oil, etc.).   Mixture with
    fuels  may explode.  Container may explode in heat of fire.   Vapor
    explosion and poison  hazard may occur  indoors, outdoors or in  sewers  (DOT
    1984,  Guide 20).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (Weiss 1980,  p.  664)

        Conditions to Avoid:  Moisture  and physical damage to storage
        container (*NFPA  1978)

    Incompatibility (Materials to Avoid):   Incompatible with combustible
    matter,  chlorinated hydrocarbons, ammonia, carbon disulfide  (NIOSH/OSHA
    1978,  p.  171).  Reacts  with alkalies to form nitrates and nitrites (*Merck
    1976).   Violent reaction with cyclohexane, fluorine, formaldehyde,
    alcohols,  nitrobenzene, petroleum,  and toluene (Sax 1984, p. 2023).

    Hazardous  Decomposition or Byproducts:  Decomposes in water  forming
    nitric acid and nitric  oxide (*Merck 1976)

    Hazardous  Polymerization:   May Occur:  Not  Found
                               May Not Occur:   Not Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  10102-44-0
                                      Page 3 of 4
                         NITROGEN  DIOXIDE

SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (-Sax 1979)
                       Skin:   Yes  (Student  1981, p. 371)
                       Ingestion:  Yes (NIOSH/OSHA 1978,  p.  141)

    Health Hazards  (Acute, Delayed,  and Chronic):   Severe exposures may be
    fatal  (BASE 1980, p.  685).   Contact may cause burns to skin and eyes.
    Contact with liquid may cause  frostbite (DOT 1984, Guide 20).   This
    compound was reported to react with blood to form methemoglobin (*Gosselin
    1978).  The lowest  lethal  human  inhalation dose has been reported  at  200
    ppm/1  min (*NIOSH/RTECS 1985).

    Signs and  Symptoms  of Exposure:   It  can cause death by asphyxiation.
    Symptoms include coughing, frothy thick sputum, shortness of breath,
    labored breathing,  chest pain, bluing of lips and nail beds,  rapid
    breathing,  rapid heart beat, abdominal pain, fatigue, restlessness, mental
    confusion and pulmonary edema  (NIOSH/OSHA 1978, p. 141,  Weiss 1980, p.
    664,  DASE 1980,  p.  685).

    Medical  Conditions  Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air; call
    emergency medical care.  If  not  breathing, give artificial respiration.
    If breathing is  difficult, give  oxygen.  Remove and isolate contaminated
    clothing and shoes  at the  site.  In case of contact with material,
    immediately flush skin or  eyes with running water for at least 15
    minutes.   Keep victim quiet  and  maintain normal body temperature.  Effects
    may be delayed;  keep victim  under observation (DOT 1984, Guide 20).


SECTION  VI -- USE INFORMATION

    It is  used in bleaching flour; in initiation of organic compounds  and
    explosives; in manufacture of  oxidized cellulose for acrylates (*Hawley
    1977); as a chemical intermediate (captive) for nitric acid;  and as a
    catalyst for sulfuric acid (*SRI).

-------
                                      CAS Registry  Number:   10102-44-0
                                      Page 4 of 4
                         NITROGEN DIOXIDE
SECTION  VII  --PRECAUTIONS  FOR SAFE HANDLING  AND USE
(Steps to  be .Taken in Case  Material is Released or Spilled)

    Keep unnecessary people away;  isolate hazard area and deny entry.   Stay
    upwind;  keep out of  low areas.  Ventilate closed spaces before entering
    them.  Wear positive pressure  breathing apparatus and full protective
    clothing.   Evacuate  area endangered by gas (DOT 1984, Guide 20).
    Evacuation:   If material is  leaking (but not on fire) evacuate for a
    radius of  2500 feet.  For water spills, neutralize with agricultural lime
    (slaked  lime),  crushed  limestone, or sodium bicarbonate.  For an air
    spill, apply water spray or  mist to knock down vapors.  Vapor knockdown
    water  is corrosive or toxic  and should be diked for containment (Student
    1981,  p.: 371).   Keep combustibles (wood, paper, oil, etc.) away from
    spilled  material.  Stop leak if you can do so without risk.  Use water
    spray  to reduce vapor but do not put water on leak or spill area.   Isolate
    area until gas  has dispersed (DOT 1984, Guide 20).   In case of a spill or
    leak from  a drum or  smaller  container or a small leak from a tank, isolate
    for 110  feet in all  directions.  In case of a large spill from a tank or
    many containers,  first  isolate for 220 feet in all directions, then
    evacuate in a downwind  direction an area 0.5 miles wide and 0.8 miles long
    (DOT 1984,  Table of  Isolation  and Evacuation Distances).

-------
                                           CAS Registry  Number:  10124-50-2
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31. 1985
                                                   Revision:
CHEMICAL IDENTITY -- POTASSIUM ARSENITE

CAS Registry Number:  10124-50-2

Synonyms:  Arsenious Acid, Potassium Salt; Arsenenous Acid,  Potassium Salt;
Arsonic Acid,  Potassium Salt;  Fowler's Solution;  NSC  3060; Potassium Arsenite,
Solid;  Potassium Metaarsenite

Chemical Formula:   KAsO •HAsCL (approximate  -- commercial product)
(Merck  1983,  p. 1098)

Molecular Weight:  253.9


SECTION  I -•- HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Air:  TWA 10  yg  (As)/m3 (*NIOSH  1978)

    ACGIH TLV:   0.2 mg  (As)/m3  (*ACGIH 1983)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD..   oral (dog) 3
    mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H  0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   Not  Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:   Soluble  in water (*Weast 1979)

    Appearance and Odor:  White hygroscopic powder  (*Merck 1976)

-------
                                      CAS  Registry  Number:   10124-50-2
                                      Page 2 of 3
                        POTASSIUM ARSENITE
SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing Methods:  Extinguish with dry chemical, carbon dioxide,
    water  spray  or foam (''-DOT 1984).

    Special  Fire Fighting  Procedures:   Keep unnecessary people away; stay
    upwind;  keep out of low areas.   Wear  full  protective clothing and
    self-contained breathing apparatus (DOT 1984, Guide 54).

    Unusual Fire and Explosion  Hazards:   Fire may produce  irritating or
    poisonous  gases  (*DOT  1984)                  .              •


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:   Yes (*IARC 1972-1985)
                 Stable:

        Conditions to Avoid:  Aeration (*IARC  1972-1985)

    Incompatibility (Materials to Avoid):   Not  Found

    Hazardous Decomposition or Byproducts:   Not Found

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V  -- HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:   Yes (*Sax 1975)
                      Skin:  Not Found
                       Ingestion:   Yes  (*Sax 1975)

    Health Hazards (Acute, Delayed, and Chronic):  Very toxic:   probable
    oral lethal  dose in humans  is  50-500  mg/kg, or between  1 teaspoonful and
    one ounce  for a  150-lb. adult  (*Gosselin 1976).   It is  a skin irritant and
    allergen (*Sax 1975).

-------
                                      CAS Registry Number:   10124-50-2
                                      Page 3 of 3
                        POTASSIUM ARSENITE
SECTION  V -- HEALTH  HAZARD DATA (Continued)

    Signs and Symptoms of Exposure:  Nausea, vomiting and diarrhea result
    from arsenic  ingestion.  Patient may go into  collapse and shock with weak,
    rapid pulse,  cold sweat, coma,  and death.   Chronic  arsenic poisoning may
    manifest itself by loss of appetite,  cramps,  nausea, constipation,  or
    diarrhea.   Liver damage may cause jaundice.   Itching or skin pigmentation
    changes may occur ("Sax 1975).

    Medical Conditions Generally Aggravated by Exposure:  Acute allergic
    reactions  to  arsenic compounds  are fairly  common  (Sax 1984, p. 2268-2269).

    Emergency and First Aid  Procedures:  Move victim  to fresh air; call
    emergency  medical care.  Remove and isolate contaminated clothing and
    shoes at the  site.   In case of  contact with material, immediately flush
    eyes with  running water for at  least 15 minutes.  Wash skin with soap and
    water (DOT 1984, Guide 54).
SECTION  VI  --  USE INFORMATION

    Reduces  silver salt to metallic silver during mirror silvering.
    Currently, it is probably not being used (Merck  1983, p. 1098).


SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken in Case Material is Released or Spilled)

    Avoid  inhalation and skin contact; wear proper respiratory protection and
    protective clothing.  With clean shovel place material into clean, dry
    container and cover; move containers from spill  area.  Dike far ahead of
    spill  for later disposal.  Do not touch spilled  material; stop leak if you
    can do it without risk (DOT 1984, Guide 54).

-------
                                     CAS Registry  Number:  10140-87-1
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31, 1985
                                                  Revision:
CHEMICAL IDENTITY -- ETHANOL,  1,2-DICHLORO-, ACETATE

CAS Registry Number:  10140-87-1

Synonyms (NIOSH/RTECS 1983 Synonyms, Volume 2, p. 249):  1,2-Dichloroethyl
Acetate

Chemical Formula:   C.H,C1000
                    46  22
Molecular Weight:  157.00


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LCL    inhalation
    (rat)  0.10 mg/liter/4 hours  (NIOSH/RTECS 1983, Volume 2,  p.  249).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   136-149°F,  58-65°C at 13 mmHg (Hawley  1981, p. 335)

    Specific Gravity (H20=l):  1.296  at  20°C  (Hawley 1981, p.  335)

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   Less than -26°F,  less than -32°C (Hawley  1981, p. 335)

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility  in Water:   Insoluble (Hawley 1981,  p. 335)

    Appearance and Odor:   Water-white liquid  (Hawley 1981,  p.  335)

-------
                                      CAS Registry Number:  10140-87-1
                                      Page 2 of 3
                  ETHANOL,  1,2-DICHLORO-,  ACETATE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  307°F, 152°C (Hawley 1981, p.  335)
    Flammable Limits:  Combustible (Hawley 1981,  p.  335)
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:   (Non-Specific -- Combustible Liquid, n.o.s.)
    Small  fires:   dry chemical, carbon dioxide, water spray  or foam.   Large
    fires:   water spray,  fog  or foam  (DOT 1984, Guide 27).

    Special  Fire Fighting Procedures:  (Non-Specific -- Combustible  Liquid,
    n.o.s.)   Move container from fire area if you can do it  without  risk.
    Cool containers  that  are  exposed to flames with water  from the side until
    well after fire  is out.   For massive fire in cargo area, use unmanned hose
    holder or monitor nozzles; if this is impossible, withdraw from  area and
    let fire burn.   Withdraw  immediately in case of rising sound from venting
    safety device or any  discoloration of tank due to fire.   Wear
    self-contained (positive  pressure if available)  breathing apparatus and
    full protective  clothing.  Isolate one-half mile in all  directions if tank
    car or truck is  involved  in fire  (DOT 1984, Guide 27).

    Unusual  Fire and Explosion Hazards:   (Non-Specific -- Combustible
    Liquid,  n.o.s.)  May  be ignited by heat, sparks  or flames.   Vapors may
    travel to a source of ignition and flash back.  Container may explode in
    heat of fire.  Vapor  explosion hazard indoors, outdoors  or in sewers.
    Runoff to sewer  may create fire or explosion hazard (DOT 1984, Guide 27).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:   Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):   (Non-Specific -- Esters)   Esters
    may explode on mixing with nitrates (Sax 1984, p. 1298).

    Hazardous  Decomposition  or Byproducts:  (Non-Specific  -- Chlorinated
    Hydrocarbons, Aliphatic)  When heated to decomposition,  it may emit highly
    toxic  fumes of phosgene (Sax 1984, p. 673).

    Hazardous  Polymerization: May Occur:   Not Found
                               May  Not Occur:   Not  Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:   10140-87-1
                                      Page 3 of 3
                 ETHANOL,  1,2-DICHLORO-, ACETATE
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Hawley 1981, p. 335)
                      Skin:  Not Found
                      Ingestion:   Not Found

    Health Hazards (Acute,  Delayed,  and Chronic):  This material is  toxic
    by inhalation  (Hawley 1981, p.  335).

    Signs and Symptoms of  Exposure:  Not Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:   (Non-Specific -- Combustible
    Liquid, n.o.s.)  Move victim to fresh air;  call emergency medical care.
    If not breathing, give artificial respiration.  If breathing is difficult,
    give oxygen.   In case of contact with material, immediately flush eyes
    with running water for at least 15 minutes.   Wash skin with soap and
    water. Remove and isolate contaminated clothing and shoes at the site
    (DOT 1984,  Guide 27).


SECTION  VI  -- USE INFORMATION

    This material  is used in organic synthesis (Hawley  1981, p. 335).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING  AND USE
(Steps to be  Taken in Case Material is Released or Spilled)

    (Non-Specific  -- Combustible Liquid,  n.o.s.)  Keep unnecessary people
    away;  isolate  hazard area and deny entry.   Stay upwind; keep out of low
    areas. Wear self-contained (positive pressure if available) breathing
    apparatus and  full protective clothing.  Shut off ignition sources; no
    flares, smoking  or flames in hazard area.   Stop leak if you can do it
    without risk.  Use water spray to reduce vapors.  Small spills:  take up
    with sand or other non-combustible absorbent  material and place into
    containers for later disposal.   Large spills:  dike far ahead of spill  for
    later disposal (DOT  1984, Guide 27).

-------
                                     CAS  Registry Number:   10210-68-1
                                     Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October 31. 1985
                                                  Revision:
CHEMICAL IDENTITY --  COBALT CARBONYL

CAS Registry  Number:  10210-68-1

Synonyms (NIOSH/RTECS 1983 Synonyms, Volume 1, p. 950):   Cobalt,
Di-mu-Carbonylhexacarbonyldi-, (Co-Co);  Cobalt Octacarbonyl; Cobalt
Tetracarbonyl; Cobalt Tetracarbonyl Dimer; Di-mu-Carbonylhexacarbonyldicobalt;
Dicobalt  Carbonyl; Dicobalt Octacarbonyl; Octacarbonyldicobalt

Chemical  Formula:  C.Co.CL
                    o  Z o

Molecular Weight:  341.94


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  TWA Air:  100 yg (Cobalt)/mJ (fume and dust)
    (NIOSH/RTECS 1983,  p.  950)

    ACGIH TLV:  TWA 100 ug/mj  (NIOSH/RTECS 1983, p. 950)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LC.. inhalation

    (mouse) 0.027 mg/liter/2 hours (*NIOSH/RTECS 1985)


SE;CTION  n -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  Decomposes  at 126°F, 52°C (Weast  1979, p.  B-72)

    Specific Gravity  (H20=l):   1.73  at 18 mmHg (Weast 1979, p. B-72)

    Vapor Pressure (mmHg):  0.07 at 15°C  (Encyc Occupat Health and Safety
    1983, p. 493)

    Melting Point:   124°F, 51°C (Weast 1979, p.  B-72)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl  acetate=l):  Not Found

-------
                                     CAS Registry Number:  10210-68-1
                                     Page 2 of 4
                         COBALT  CARBONYL


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility  in Water:  Insoluble  (Weast 1979,  p.  B-72)

    Appearance and Odor:   Orange  or dark brown crystalline solid (Weast
    1979,  p. B-72).


SECTION  III -- FIRE  AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing Methods:  Not Found

    Special Fire Fighting Procedures:  Not Found

    Unusual Fire  and  Explosion Hazards:  When heated to decomposition, it
    emits  carbon monoxide (Sax  1984, p. 800)


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Yes  (Merck 1983, p. 448)
                Stable:

        Conditions to  Avoid:  Decomposes on exposure  to  air (Merck 1983, p.
        448)

    Incompatibility (Materials to Avoid):   Slowly attacked by hydrochloric
    acid and sulfuric  acid, more rapidly by nitric  acid  and bromine (Merck
    1983,  p. 448).

    Hazardous  Decomposition or Byproducts:  Emits carbon monoxide when
    heated to decomposition  (Sax 1984, p. 800).

    Hazardous  Polymerization:   May Occur:  Not Found
                              May Not  Occur:   Not  Found

        Conditions to  Avoid:  Not Found

-------
                                      CAS  Registry Number:  10210-68-1
                                      Page 3 of 4
                         COBALT CARBONYL
SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes  (Hawley  1981, p. 263)
                      Skin:  Yes (Encyc Occupat Health and Safety 1983,
                             p.  493)
                      Ingestion:   Yes (Hawley  1981, p. 263)

SECTION  V --  HEALTH HAZARD DATA  (Continued)

    Health Hazards (Acute,  Delayed, and Chronic):   This material  is highly
    toxic.  It  is  irritating to skin and mucous membranes  (Merck 1983,  p.
    448).   Cobalt  carbonyls share the general toxicity of carbonyls because of
    the direct  irritant and systemic action of  the compound coupled with the
    effects of  carbon monoxide which is  released from their decomposition
    (Encyc Occupat Health and Safety 1983, p. 493).

    Signs and Symptoms of  Exposure:   The carbonyls  are direct irritants
    (Sax  1984,  p.  646).  Carbon monoxide causes breathlessness,  headache,
    weakness and fatigue, nausea and vomiting,  dimness of vision,  collapse and
    coma  (Gosselin 1984, p.  111-98).

    Medical  Conditions Generally Aggravated by Exposure:   Not  Found

    Emergency  and First Aid Procedures:   (Non-Specific -- Poisonous  Solid,
    n.o.s.)   Move  victim to fresh air; call emergency medical care. In case
    of contact  with material,  immediately flush skin or eyes with running
    water for at least 15 minutes.   Remove and  isolate clothing  and shoes at
    the site (DOT  1984, Guide 53).


SECTION  VI -- USE INFORMATION

    This  material  is used as a catalyst  for a number of reactions (Merck 1983,
    p.  448).  It is also used in anti-knock gasoline and for high-purity
    cobalt salts (Hawley 1981,  p.  263).


SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING  AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    Avoid inhalation and skin contact; wear proper respiratory protection and
    full  protective clothing (see Section V above).

-------
                                     CAS Registry Number:  10210-68-1
                                     Page 4 of 4
                         COBALT CARBONYL
COMMENTS:

    Sources searched but no information found:
        NFPA  1984
        Student 1981
        Weiss 1980
        CHRIS 1978
        Doull 1986
     .   Clayton and Clayton 1981-1982
        Arena 1979
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes 1982
        Physicians' Desk Reference 1985
        Oilman 1985

-------
                                           CAS Registry Number:   10265-92-6
                                           Page 1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  Octfaber':31V"T985
                                                   Revision:
CHEMICAL IDENTITY -- METHAMIDOPHOS

CAS Registry Number:   10265-92-6

Synonyms:  Phosphoraraidothioic Acid,  0,S-Dimethyl Ester; Monitor;
Acephate-Met;  BAY 71628; Bayer 5546; Bayer 71628; Chevron 9006; Chevron Ortho
9006;  ENT 27,396; Hamidop; Metamidophos;  Monitor (Insecticide); 0,S-Dimethyl
Ester  Amide  of Amidothioate;  0,S-Dimethyl Phosphoramidothioate; 0,S-Dimethyl
Phosphoramidothiolate; Ortho  9006;  RE  9006; SRA 5172;  Tamaron

Chemical Formula:   C0H0N00PS
                    Z o  Z

Molecular Weight:  141.14


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   U>5  oral (rat) 7.5

    mg/kg (*NIOSH/RTECS 1985)


SECTION II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Decomposes (Worthing 1983, p. 359)

    Specific Gravity (H20=l):  1.31 at 44.5°C (^Worthing 1979)
    Vapor Pressure (mmHg):   3 x 10    at 30°C (^Worthing 1979)

    Melting Point:  112°F, 44.5°C  (*Worthing 1979)

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate  (Butyl  acetate=l):   Not Found

    Solubility  in Water:  90 g/liter  at 20°C  (*Farm Chemicals Handbook
    1981); greater than 2000 g/liter at 20°C  (Worthing 1983, p.  359)

-------
                                      CAS Registry Number:   10265-92-6
                                      Page 2 of 4
                          METHAMIDOPHOS
SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS (Continued)

    Appearance and Odor:  Crystalline solid (-Farm Chemicals Handbook
    1981); technical product is off-white (^Worthing 1979); pungent odor
    (*Spencer  1973).
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  (Non-Specific  --  Organophosphorus Pesticide,
    n.o.s.)   This  material may burn, but does  not  ignite readily.  For small
    fires, use  dry chemical, carbon dioxide, water spray, or foam.    For
    large  fires,  use water spray, fog, or foam (DOT 1984, Guide 55).

    Special  Fire Fighting  Procedures:  (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)  Stay upwind; keep out  of low areas.  Move containers
    from fire area if you can do it without risk.   Fight fire from maximum
    distance.   Dike fire control water for  later disposal; do not scatter the
    material.   Wear positive pressure breathing apparatus and special
    protective  clothing (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-specific --  Organophosphorus
    Pesticide,  n.o.s.)  Container may explode  in heat of fire.  Fire and
    runoff from fire control water may produce irritating or poisonous gases
    (DOT 1984,  Guide 55).
SECTION  IV  --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes, at neutral  pH  (*Worthing 1979)

        Conditions to Avoid:  Strong acid or alkali (^Worthing  1979)

    Incompatibility (Materials to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:   (Non-Specific  --
    Phosphoramidothioic Acid, 0-Ethyl S-Methyl Ester)  Emits very toxic fumes
    of nitrogen  oxides, phosphorus oxides, and sulfur oxides when heated to
    decomposition (Sax 1984, p. 2213).

-------
                                      CAS Registry Number:   10265-92-6
                                      Page 3 of 4
                          METHAMIDOPHOS
SECTION  IV --  REACTIVITY DATA (Continued)

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (*Farm Chemicals Handbook 1981)
                      Skin:  Yes  (*Farm Chemicals Handbook  1981)
                      Ingestion:   Yes (*Farm Chemicals Handbook 1981)

    Health Hazards (Acute, Delayed,  and Chronic):  This material is harmful
    or fatal  if swallowed,  inhaled, or absorbed through the  skin (*Farm
    Chemicals Handbook 1981).

    Signs and Symptoms of Exposure:  Symptoms may include  nausea,  vomiting,
    abdominal cramps, diarrhea, excessive salivation,  headache, giddiness,
    weakness, muscle twitching, difficult breathing, blurring or dimness of
    vision, and loss of muscle coordination.   Death may occur from failure of
    the respiratory  center, paralysis of the  respiratory muscles, intense
    bronchoconstriction, or all three (*Gosselin 1976).

    Medical Conditions Generally Aggravated  by Exposure:   Not Found

    Emergency and First Aid  Procedures:   (Non-Specific --  Organophosphorus
    Pesticide,  n.o.s.)  Move victim to fresh  air;  call emergency medical
    care.   If not  breathing, give artificial  respiration.  If breathing is
    difficult,  give  oxygen.  In case of contact with material, immediately
    flush skin or  eyes with running water for at least 15 minutes.  Speed in
    removing material from skip is of extreme importance.  Remove and isolate
    contaminated clothing and shoes at the site.  Keep victim quiet and
    maintain normal  body temperature.  Effects may be  delayed; keep victim
    under observation (DOT  1984, Guide 55).


SECTION  VI  --  USE INFORMATION

    This material  is used as an insecticide on a number of vegetables and on
    cotton (*SRI).

-------
                                      CAS Registry Number:   10265-92-6
                                      Page 4 of 4
                          METHAMIDOPHOS
SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released  or Spilled)

    (Non-Specific -- Organophosphorus Pesticide, n.o.s.)  Stay upwind; keep
    out of low  areas.  Ventilate closed spaces before entering them.  Wear
    positive pressure breathing apparatus and special protective clothing.  Do
    not touch spilled material; stop leak if  you can  do so without risk.   Use
    water  spray to  reduce vapors.  Small spills:  absorb with sand or other
    noncombustible  absorbent material and place  into  containers for later
    dispos-al.   Small dry spills:  with clean  shovel place material into clean
    dry container and cover; move containers  from spill area.  Large spills:
    dike far ahead  of spill for later disposal  (DOT 1984, Guide 55).

-------
                                     CAS Registry Number:   10294-34-5
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- BORON TRICHLORIDE

CAS Registry  Number:  10294-34-5

Synonyms:  Borane, Trichloro-; Boron Chloride; Boron Chloride  [BC1 ];

Trichloroborane; Trichloroboron

Chemical Formula:   BC1.

Molecular  Weight:  117.19


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC,   inhalation

    (rat,  mouse) 0.10 mg/liter/7 hours (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   54.5°F, 12.5°C (*Merck  1976)

    Specific Gravity (H20=l):   1.35 at 12/4°C  (*Merck 1976)

    Vapor Pressure (mmHg):   760 at  12.7°C (*Sax 1979)

    Melting Point:   -161°F, -107°C (*Merck  1976)

    Vapor Density (AIR=1):   4.03  (*Sax 1979)

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:   Decomposes  in water to form hydrogen chloride and
    boric acid (Weast 1980,  p.  B62)

    Appearance and Odor:  Colorless, fuming liquid at  low temperature
    (*Merck 1976) with a pungent,  irritating odor (*Sax  1979)

-------
                                       CAS Registry Number:   10294-34-5
                                       Page 2 of 4
                         BORON  TRICHLORIDE
SECTION III -- FIRE  AND EXPLOSION HAZARD DATA

    Flash Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:   It is not  flammable  (Weiss 1980, p. 171).  Use
    dry chemical,  carbon dioxide,  or  dry sand  to  extinguish.  If large
    quantities of combustibles  are involved, use  water in  flooding quantities
    as spray and fog.   Use water  spray to  absorb  vapors (Student 1981,
    p. 74).   For large fires  use  water spray,  fog,  or foam (DOT 1984, Guide
    15).   Do not get water on material itself  (Student 1981, p. 74).

    Special  Fire Fighting Procedures:   Cool all affected containers with
    flooding quantities 'of water.  Apply water from as far a distance as
    possible (Student  1981, p.  74).   Do not get water inside container.  Move
    container from  fire area  if you can do so  without risk.  Stay away from
    ends  of tanks.   Spray cooling water on containers that are exposed' to
    flames until well  after fire  is out.   Isolate area until gas has dispersed
    (DOT  1984, Guide 15).

    Unusual Fire and  Explosion Hazards:   When heated to  decomposition,  it
    emits toxic fumes.   It will react with water  or steam  to produce heat, and
    toxic and corrosive fumes  ('"Sax 1979).


SECTION IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:   Yes (Weiss  1980, p.  171)

       Conditions to Avoid:  Not Found

    Incompatibility  (Materials to  Avoid):   Avoid aniline,
    hexafluorisopropylidene amino lithium, nitrogen dioxide, phosphine,
    grease,  organic  matter, and oxygen (Sax 1984, p. 514).  Nitrogen peroxide,
    phosphine, fat or  grease  react energetically  with boron trichloride (*NFPA
    1978).   It will  react with water  or steam  to  produce heat, and toxic and
    corrosive  fumes  (*Sax 1979).   Oxygen and boron  trichloride react
    vigorously on sparking (*NFPA, 1978).  Boron  trichloride and aniline react
    violently  in the absence  of a coolant  or diluent (*Bretherick 1979).

    Hazardous Decomposition or Byproducts:   In  hot water, decomposes to
    hydrochloric acid  and boric acid  (*Weast 1979).  Fumes  and hydrolyzes in
    moist air  to form  hydrochloric acid and oily, irritating corrosives
    (*Encyc  Occupat  Health and Safety 1971).   When  heated  to decomposition,
    emits toxic fumes  of chlorides  (*Sax 1979).

-------
                                      CAS Registry Number:  10294-34-5
                                      Page 3 of 4
                         BORON TRICHLORIDE
SECTION  IV --  REACTIVITY DATA  (Continued)

        Hazardous Polymerization:  May Occur:   Not Found
                               May  Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (-Rumack 1975 to Present)
                      Skin:  Yes  (*Rumack 1975 to Present)
                      Ingestion:   Yes (*Rumack 1975 to Present)

    Health Hazards  (Acute, Delayed,  and  Chronic):   Strong  irritant to
    tissue.   Fumes  are corrosive and highly toxic (*Hawley 1977).   Boron
    affects the central  nervous system causing depression of circulation  as
    well as shock and coma.  May cause severe burns to skin.   May  result  in
    marked fluid and electrolyte loss and shock ('vRumack 1975 to Present).

    Signs and  Symptoms of Exposure:  Symptoms include depression of
    circulation,  persistent vomiting and diarrhea,  profound shock  and coma.
    Temperature becomes  sub-normal and rash may cover entire body  (*Sax
    1979).  Inhalation produces low blood oxygen,  difficulty in breathing,
    chest pain and  pulmonary edema.  Contact with eyes produces severe pain,
    swelling, corneal erosions and blindness.  Viscid.white or blood-stained
    foamy mucus and threads of tissue may appear in mouth ("Rumack 1975 to
    Present).

    Medical  Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  Immediately irrigate exposed skin
    with tap water  for 15  minutes.  Treat burns prophylactically for
    infection.   Irrigate exposed eyes for 15 minutes with water.   If  inhaled:
    remove patient  to fresh air.  Monitor for respiratory distress, including
    bronchitis  and  pneumonia.  If breathing is difficult,  administer  oxygen
    (*Rumack 1975 to Present).
    SECTION  VI  --  USE INFORMATION

    Manufacture arid  purification of boron; catalyst in organic reactions;
    semi-conductors; bonding of iron or steel; purification of metal  alloys to
    remove oxides, nitrides, and carbides (*Merck 1983);  chemical  intermediate
    for boron  filaments  (*SRI); soldering flux; electrical resistors;  and
    extinguishing magnesium fires in heat treating furnaces (*Hawley  1977)

-------
                                      CAS Registry Number:  10294-34-5
                                      Page 4 of 4
                        BORON TRICHLORIDE
SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or Spilled)

    Keep material out of water sources and sewers.  Build dikes to contain
    flow as  necessary.  Use water spray to knock down vapors.  Do not use
    water  on material itself.  Neutralize spilled material with crushed
    limestone,  soda ash or lime.  Avoid breathing vapors.  Keep upwind.  Wear
    self-contained  breathing apparatus.   Avoid bodily contact with the
    material.   Wear boots, protective gloves and goggles.  Do not handle
    broken packages without protective equipment.  Wash away any material
    which  may have  contacted the body with copious amounts of water or soap
    and water.   If  contact with the material anticipated,  wear full protective
    clothing (Student 1981, p. 74).  Stop leak if you can do so without risk.
    Small  spills:   Flush area with flooding amounts of water.  Large spills:
    Dike far ahead  of spill for later disposal.   Do not get water inside
    container.   Isolate area until gas has dispersed (DOT 1984, Guide 15).

-------
                                            CAS Registry Number:  10311-84-9
                                            Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- DIALIFOS

CAS Registry Number:   10311-84-9

Synonyms:  Phosphorodithioic Acid, S-(2-Chloro-l-(l,3-Dihydro-l,3-Dioxo-2H-
Isoindol-2-yl)Ethyl) 0,0-Diethyl Ester;  Dialifor; Dialiphor; ENT 27320;
Hercules 14503;  0,0-Diethyl S-(2-chloro-l-phthalimidoethyl) Phosphorodithioate;
Phosphorodithioic acid, 0,0-Diethyl Ester,  S-Ester with N-(2-Chloro-l-
Mercaptoethyl)Phthalimide; Phosphorodithioic  acid, S-(2-chloro-l-
phthalimidoethyl) 0,0-Diethyl Ester; S-(2-chloro-l-(l,3-Dihydro-l,3-Dioxo-2H-
Isoindol-2-yl)Ethyl) 0,0-Diethyl Phosphorodithioate; S-(2-chloro-l-  .
Phthalimidoethyl) 0,0-Diethyl Phosphorodithioate; Torak

Chemical Formula:   C, .H^CINO.PS.
                    14 17   42

Molecular  Weight:   393.84


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not  Found

    IDLH:  Not  Found

    Other Limits Recommended:   Toxicity information:   LD   oral (rat) 5

    mg/kg (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H 0=1):  Not  Found

    Vapor Pressure (mmHg):  10~3 at 35°C  (Worthing 1983, p. 168)

    Melting Point:   153-156°F, 67-69°C solid; 144-147°F,  62-64°C
    recrystallized  from toluene and hexane  (*Merck 1976)

    Vapor Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl  acetate=l):  Not Found

-------
                                      CAS Registry Number:  10311-84-9
                                      Page 2 of 4
                             DIALIFOS


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Solubility in Water:   Insoluble (-Merck 1976)

    Appearance and Odor:  White crystalline solid,  also  reported as oil
    (*Merck 1976),  colorless  (-Worthing 1979)


SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing  Methods:   (Non-Specific -- Organophosphorus Pesticide,
    Solid, n.o.s.)  This  material may burn but does not ignite readily.  Small
    fires:  dry chemical, carbon dioxide, water spray, or  foam.  Large fires:
    water  spray, fog, or  foam (DOT 1984, Guide 55).

    Special  Fire Fighting  Procedures:  (Non-Specific -- Organophosphorus
    Pesticide,  Solid, n.o.s.)  Stay upwind; keep out of low  areas.  Ventilate
    closed spaces before  entering them. Wear positive pressure breathing
    apparatus and special protective clothing.  Move container from fire area
    if you can do it without  risk.  Fight fire from maximum  distance.  Dike
    fire control water for later disposal; do not scatter  the material (DOT
    1984,  Guide 55).

    Unusual Fire and Explosion Hazards:  Releases nitrogen oxides,  sulfur
    oxides,  and phosphorus oxides when heated (Sax 1984, p.  2216)


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                Stable:   Yes ('^Worthing 1979)

        Conditions to Avoid:  Hydrolyzed by concentrated alkali  (-Worthing
        1979)

    Incompatibility  (Materials to Avoid):  Readily hydrolyzed by
    concentrated alkali (-Worthing 1979)

    Hazardous  Decomposition  or Byproducts:   When heated  to decomposition,
    it emits toxic  fumes of sulfur oxides, nitrogen oxides,  and phosphorus
    oxides (Sax 1984, p.  2216)

-------
                                      CAS Registry Number:  10311-84-9
                                      Page 3 of 4
                             DIALIFOS
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Polymerization:   May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Yes  (Sax 1984, p. 2216)
                      Ingestion:   Yes (Sax 1984,  p.  2216)

    Health Hazards  (Acute, Delayed,  and  Chronic):  This material can cause
    serious symptoms and in extreme cases death by respiratory arrest
    (*Gosselin 1976).

    Signs and Symptoms of Exposure:  Similar to parathion.  Symptoms
    include muscle weakness and twitching, fluid in lungs,  nausea,  vomiting,
    stomach cramps,  diarrhea, excessive salivation,  headache,  giddiness,
    dizziness,  tightness in chest, blurring or dimness of  vision,  tears,
    constriction of  pupils, loss of muscle coordination, slurring  of speech,
    mental confusion,  disorientation and drowsiness,  difficulty with
    breathing,  convulsions, and coma (*Gosselin 1976).

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  (Non-Specific  -- Organophosphorus
    Pesticide,  Solid,  n.o.s.)  Move victim to fresh air; call  emergency
    medical care.  If not  breathing, give artificial respiration.   If
    breathing is difficult, give oxygen.   In case of contact with  material,
    immediately flush skin-or eyes with running water for  at least 15
    minutes.  Speed  in removing material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes at  the  site.  Keep
    victim quiet and maintain normal body temperature. Effects may be
    delayed; keep victim under observation (DOT 1984, Guide 55).
SECTION  VI  --  USE  INFORMATION

    This material  is  a  non-systemic insecticide and acaricide (kills  beetles,
    ticks, mites,  etc.),  effective in controlling many insects and mites
    common to apples, citrus, grapes, nut trees, potatoes, and vegetables
    (*Worthing 1979).

-------
                                      CAS Registry Number:  10311-84-9
                                      Page 4 of 4
                             DIALIFOS
SECTION  VII  ---PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or Spilled)

    (Non-Specific -- Organophosphorus Pesticide, Solid,  n.o.s.)  Keep
    unnecessary people away; isolate hazard area and deny entry.  Stay upwind;
    keep out of low areas.  Ventilate closed spaces before entering them.
    Wear positive pressure breathing apparatus and special protective
    clothing.  Remove and isolate contaminated clothing  at the  site.  Do not
    touch  spilled material; stop leak if you can do it without  risk.  Use
    water  spray to  reduce vapors.  Small spills:  take up with  sand or other
    noncombustible  absorbent material and place into containers for later
    disposal.  Small dry spills:  with clean shovel place material into clean,
    dry container and cover; move containers from spill  area.   Large spills:
    dike far ahead  of spill for later disposal (DOT 1984,  Guide 55).

-------
                                     CAS Registry Number:   10476-95-6
                                     Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31, 1985
                                                  Revision:
CHEMICAL  IDENTITY --  METHACROLEIN DIACETATE

CAS Registry Number:  10476-95-6

Synonyms:   (NIOSH/RTECS  1983 Synonyms, Volume 3, p. 331)   2-Propene-l,l-
Diol,  2-Methyl-, Diacetate;  Acetic Acid,  2-Methyl-2-Propene-l,1-Diol Diester

Chemical Formula:  C0H,-0.
                    O 1Z *f

Molecular Weight:  172.20


SECTION I  --  HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found
    Other Limits Recommended:  Toxicity information:   LC,   inhalation
                                                       low
    (rat)
    1985)
(rat) 0.44 mg/liter/1 hour; LD   dermal  (rabbit) 44 mg/kg   (*NIOSH/RTECS
SECTION  II --  PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:   Not Found

-------
                                      CAS Registry Number:  10476-95-6
                                      Page 2 of 3
                      METHACROLEIN DIACETATE


SECTION  III  --  FIRE AND EXPLOSION HAZARD  DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing  Methods:   Not Found

    Special Fire  Fighting  Procedures:   Not Found

    Unusual Fire and Explosion  Hazards:   When heated to decomposition,  it
    emits  acrid  smoke and irritating  fumes (Sax 1984, p.  84).


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not  Found

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition or  Byproducts:  When heated to decomposition,
    it emits  acrid smoke and irritating fumes (Sax 1984*,  p. 84).

    Hazardous Polymerization:  May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not  Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (Sax 1984, p.  84)
                      Skin:  Yes  (Sax 1984, p. 84)
                      Ingestion:  Yes  (Sax 1984, p..  84)

    Health Hazards (Acute,  Delayed,  and Chronic):  Not Found
       t                                      •        -
    Signs  and Symptoms of  Exposure:  Not Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid Procedures:  Not Found

-------
                                     CAS Registry Number:   10476-95-6
                                     Page 3 of 3
                      METHACROLEIN DIACETATE


SECTION VI  -- USE INFORMATION

    Not Found


SECTION VII -- PRECAUTIONS  FOR SAFE HANDLING AND USE
(Steps  to be  Taken in Case Material is Released or Spilled)

    Not Found


COMMENTS

    Sources searched but no information found:
        NIOSH/OSHA 1978
        Hawley 1981
        Weast 1979
        Merck 1983
        DOT 1984
        NFPA  1978
        Encyc Occupat Health and Safety 1983
        Student 1981
        Weiss 1980
        CHRIS 1978
        Clayton and Clayton 1981-82
        Arena 1979
        Buchel 1983
        Gosselin 1984
        Farm  Chemicals Handbook  1984
        Hayes 1982
        Physicians' Desk Reference 1985
        Doull 1980

-------
                                      CAS Registry Number:   12002-03-8
                                      Page 1 of 4
                       EPA CHEMICAL PROFILE
                                              INTERIM
                                                    Date: October 31, 1985
                                                    Revision:
CHEMICAL IDENTITY  -- PARIS GREEN

CAS Registry Number:  12002-03-8

Synonyms:  Copper, bis(Acetato)Hexametaarsenitotetra-; (Acetato)
Trimetaarsenitodicopper; (Acetato-0)(Trimetaarsenito)Dicopper; Basle Green; CI
77410; CI Pigment  Green 21; Copper Acetate Arsenite;  Copper Aceto-Arsenite;
Copper (II)  Acetate Meta-Arsenite; Cupric Acetoarsenite; Emerald Green; ENT
884; French  Green;  Genuine Paris Green;  Imperial  Green; King's Green; Meadow
Green; Mineral Green;  Mitis Green; Moss  Green;  Mountain Green; Neuwied Green;
New Green; Ortho P-G Bait; Parrot Green; Patent Green;  Powder Green;
Schweinfurt  Green;  Schweinfurtergrun;  Schweinfurth Green; Sowbug and Cutworm
Bait; Sowbug Cutworm Control; Swedish Green;  Vienna Green; Wuerzberg Green;
Zwickau Green

Chemical Formula:   Complex Composition  (*Gosselin  1984);  Specifications
usually require approximately C.H.As-Cu.O,, (*Spencer 1982)
                              *f O  DM- ID

Molecular Weight:   For Chemical Formula (usually  contains some water):
1013.78 (NIOSH/RTECS 1983, p. 958)


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL: TWA 0.5 mg (Arsenic)/m3 (*NIOSH/RTECS  1985)

    ACGIH TLV:   Not  Found

    IDLH:   Not Found

    Other Limits Recommended:   Toxicity information:  I'D,.- oral (rat) 22

    rag/kg (*NIOSH/RTECS 1985)


SEICTION II  -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling  Point:   Decomposes  (Weiss  1980, p. 265)

    Specific Gravity (H-0=11:   Estimated as greater than 1.1 at 68°F,

    20°C (*CHRIS 1978)

    Vapor Pressure (mmHg):  Not Found

-------
                                      CAS Registry Number:  12002-03-8
                                      Page 2 of 4
                           PARIS GREEN


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Melting  Point:  Not Found

    Vapor Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility  in Water:  Insoluble (*Weast 1983)

    Appearance and Odor:  Emerald green, crystalline powder  (*Merck  1983);
    odorless (*CHRIS  1978)


SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:  Not  Flammable (Weiss 1980,  p.  265)
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  For small fires,  use  dry chemical, water spray,
    or foam.   For  large fires, use water spray,  fog,  or foam  (DOT  1984, Guide
    53).   Use  of water may  result in generation of toxic fumes  (see Section IV
    below).

    Special Fire Fighting  Procedures:  Stay upwind; keep out of  low areas.
    Wear self-contained (positive pressure if available) breathing apparatus
    and full protective clothing (DOT 1984, Guide  53).

    Unusual Fire and Explosion Hazards:   Poisonous,  volatile arsenic  oxide
    may be formed  in  fires  (*CHRIS 1978).  Exposure of dust to  flame may cause
    explosion  (*Rumack 1975 to Present).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (*Merck 1983)

       Conditions to Avoid:  Unstable in  acids and bases (*Merck  1983)

    Incompatibility  (Materials to Avoid):   Can react vigorously with
    oxidizing  materials.  Emits highly toxic fumes on contact, with acid or
    acid fumes (*Sax  1975).

-------
                                      CAS Registry Number:  12002-03-8
                                      Page 3 of 4
                           PARIS GREEN
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Decomposition or Byproducts:  When heated,  it  emits  highly
    toxic  fumes  (*Sax  1975); decomposes readily in the presence of water and
    carbon dioxide  to  yield phytotoxic arsenical compounds  ("Spencer 1982).

    Hazardous Polymerization:   May Occur:
                               May Not Occur:  Yes  (Weiss 1980, p. 265)

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes ('-Morgan 1976)
                      Skin:  Yes  (-Morgan 1976)
                      Ingestion:   Yes (*Morgan 1976)

    Health Hazards (Acute, Delayed,  and  Chronic):  This material is
    extremely toxic; the probable oral lethal dose for humans  is  5-50 mg/kg,
    or between 7  drops and  1 teaspoonful for a 150-Ib. person  (*Gosselin
    1984).  Some  absorption may occur through the skin and by  inhalation, but
    most poisonings  result  from ingestion (*Morgan 1976).   It  may cause eye
    and respiratory  tract  irritation  (*Grant 1974).  Industrial exposure may
    cause dermatitis ("Hayes 1982).

    Signs and Symptoms of Exposure:  Symptoms usually appear 1/2  to 1 hour
    after ingestion, but may be delayed.   Symptoms include a sweetish^
    metallic taste and garlicky odor; difficulty in swallowing; abdominal
    pain;  vomiting and diarrhea; dehydration; rapid heart  beat; dizziness and
    headache; and eventually coma, sometimes convulsions,  and  death (*Gosselin
    1984).

    Medical  Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:  Remove contaminated clothing and
    shoes.  For ingestion,  give copious quantities of water and induce
    repeated vomiting.   If  eyes have been exposed, flush with  water for 15
    minutes.  If  there has  been skin contact, wash thoroughly  with  soap and
    water (Weiss  1980, p.  265).


SECTION  VI -- USE INFORMATION

    This material is used  primarily as an insecticide (*Clarke 1981); it may
    be used as a  wood preservative and a pigment, particularly for  ships and
    submarines (*Merck 1983), and also finds use as an anthelmintic (*Rossoff,
    1974).

-------
                                      CAS  Registry  Number:  12002-03-8
                                      Page 4 of 4
                           PARIS GREEN


SECTION  VII -- PRECAUTIONS FOR SAFE  HANDLING  AND  USE
(Steps to  be Taken in Case Material is  Released or Spilled)

    Stay upwind; keep out of low areas.   Wear self-contained (positive
    pressure if available) breathing apparatus and full protective clothing.
    Do not touch spilled material.  Take  up small spills with sand or other
    noncombustible absorbent material and place into containers for later
    disposal.  For small dry spills, use  clean shovel to place material  in
    clean, dry container.  For large spills, dike far ahead of spill for later
    disposal (DOT 1984, Guide 53).  Use water spray to knock down dust (Weiss
    1980,  p. 265).

-------
                                            CAS  Registry Number:  12108-13-3
                                            Page 1  of 3
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31,  1985
                                                    Revision:
CHEMICAL IDENTITY  -- MANGANESE,  TRICARBONYL
METHYLCYCLOPENTADIENYL

CAS Registry Number:  12108-13-3

Synonyms:  Methylcyclopentadienyl Manganese Tricarbonyl;
(Methylcyclopentadienyl)Manganese Tricarbonyl;  (Methylcyclo-
p€'.ntadienyl)Tricarbonylmanganese; 2-Methylcyclopentadienylmanganese
Tricarbonyl;  AK-33X; Antiknock-33; CI-2;  Combustion Improver-2; Manganese,
Tricarbonyl((1,2,3,4,5-eta)-1-Methy1-2,4-Cyclopentadien-1-y1)-; Manganese,
Tricarbonyl(Methyl-pi-Cyclopentadienyl)-;  MethyIcymantrene; MMT; pi-Methyl-
cyclopentadienylmanganese Tricarbonyl;  Tricarbonyl(2-Methylcyclopentadienyl)
Manganese; Tricarbonyl(eta(5)-Methylcyclopentadienyl)Manganese; Tricarbonyl
(Methyl-pi-Cyclopentadienyl)Manganese;  Tricarbonyl(Methylcyclopentadienyl)
Manganese

Chemical Formula:  C H MnO

Molecular Weight:   218.10


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:  TWA  0.2 mg/m3  as Mn; STEL 0.6 mg/m3 as Manganese (skin)
    (*ACGIH 1980)

    IDLH:  Not  Found

    Other Limits Recommended:   Toxicity  information:  LD.   oral  (rabbit)
    95 mg/kg  (*NIOSH/RTECS 1985)


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  449°F, 232°C  (*ACGIH 1980)

    Specific Gravity (H20=l):   1.39  at 20°C  (*ACGIH 1980)

    Vapor  Pressure (mmHg):  7.3 at 100°C (*ACGIH  1980)

    Melting Point:  34°F, 1°C (Weiss  1980, p. 607)

-------
                                     CAS Registry Number:  12108-13-3
                                     Page 2 of 3
         MANGANESE,  TRICARBONYL  METHYLCYCLOPENTADIENYL


SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:   Insoluble (*ACGIH 1980)

    Appearance and Odor:  A dark orange liquid with a faintly pleasant
    smell  (*ACGIH 1980).


SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  230°F,  110°C  (CC)  (*ACGIH 1980)
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Extinguish with water, dry chemicals, foam, or
    carbon dioxide.   Wear goggles and self-contained breathing apparatus
    (Weiss 1980, p.  607).

    Special Fire Fighting Procedures:  Not Found

    Unusual Fire  and Explosion Hazards:   When heated  to decomposition,  this
    compound emits toxic  fumes of carbon  monoxide  (Sax 1984,  p. 1733).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:
                Stable:  Yes (Weiss  1980,  p. 607)

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not Found

    Hazardous  Decomposition or Byproducts:  Emits carbon monoxide when
    heated to decomposition (Sax 1984,  p.  1733).

    Hazardous  Polymerization:   May Occur:
                              May  Not Occur:  Yes  (Weiss 1980, p.  607)

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:   12108-13-3
                                      Page 3 of 3


         MANGANESE, TR/CARBONYL METHYLCYCLOPENTADIENYL


SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (*ACGIH 1980)
                      Skin:  Yes  (*ACGIH 1980)
                      Ingestion:   Yes (*ACGIH 1980)

    Health Hazards  (Acute, Delayed,  and  Chronic):  In concentrated form
    this compound  is highly toxic by all  routes of exposure.  Approximately
    5-15 ml,  when  spilled on the hand and wrist of a  worker, produced toxic
    effects within 3-5 minutes (*ACGIH 1980).

    Signs and Symptoms of Exposure:  This compound is moderately irritating
    to the eyes.   Giddiness, "thick tongue," nausea,  and headache were
    reported  to occur after skin exposure.   Human exposure data are limited;
    the primary site of  action is reported to be the  central nervous system
    (ACGIH 1980, p.  272).

    Medical Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Remove victim from exposure.
    Exposed clothing should be removed, and exposed areas of the body should
    be washed twice  with soap and water.   If eyes are exposed flush with
    copious amounts  of water for at least 15  minutes.   Induce vomiting unless
    patient is comatose, convulsing, or has lost gag  reflex.  Get medical
    attention following  all exposures to  this compound  (Weiss 1980, p. 607;
    *Rumack 1975 to  Present).


SECTION  VI  -- USE INFORMATION

    This compound  is used as a smoke abater additive  in fuels (*ACGIH 1980),  a
    gasoline  additive in antiknock mixes, and a combustion improver in
    distillate fuels and fuel oils (*SRI).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE  (Continued)
(Steps to  be  Taken in Case Material is Released or Spilled)

    Stop discharge,  if possible; isolate  and remove discharged material (Weiss
    1980,  p.  607).   Recommended protective clothing for work involving spills
    and contamination are impervious gloves,  boots, apron, and organic vapor
    respirator.  If  odor of material is present, mask should be worn.  Oxygen
    (air)  breathing  apparatus may be necessary under  certain circumstances.
    Large  spills can be  cleaned up using JP-4 or JP-5 (jet engine  fuels).
    Isopropyl alcohol may be used to clean up moderate  spills, while methyl
    ethyl  ketone should  be used for cleaning small spills and quick
    disconnects (*ACGIH  1980).  Avoid contact with liquid; keep people away.
    Call fire department and notify local health and  pollution control
    agencies  (Weiss  1980, p. 607).

-------
                                     CAS Registry Number:  13071-79-9
                                     Page  1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- TERBUFOS

CAS Registry Number:   13071-79-9

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 3, p. 141):
Phosphorodithioic Acid, 0,0-Diethyl-S-(((1,l-Dimethylethyl)thio)Methyl)-Ester;
AC 92100;  S-((Tert-Butylthio)Methyl)0,0-Diethylphosphorodithioate; Counter;
Counter 15G Soil Insecticide;  S-(((l,l-Dimethylethyl)Thio)Methyl)-0,0-Diethyl
Phosphorodithioate; Phosphorodithioic Acid S-((Tert-Butylthio)Methyl)
0,0-Diethyl Ester; Phosphorodithioic Acid S-(((l,l-Dimethylethyl)Thio)Methyl)
0,0-Diethyl Ester

Chemical Formula:   C H  0  PS

Molecular  Weight:  288.45


SECTION  I  -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not  Found

    IDLH:   Not Found

    Other Limits Recommended:  Toxicity information:   LD5Q oral (rat) 1.6

    mg/kg  (*NIOSH/RTECS 1985)


SECTION  II — PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:   156°F,  69°C at 0.01 mmHg  (Merck 1983, p. 1310)

    Specific Gravity (H20=l):  1.105 at 24°C  (Merck 1983, p. 1310)

    Vapor  Pressure (mmHg):  0.0003 mmHg at 25°C (Worthing  1983, p. 512)

    Melting Point:   -20.6°F, -29.2°C (Merck 1983, p.  1310)

    Vapor  Density (AIR=1): Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not  Found

-------
                                      CAS Registry Number:  13071-79-9
                                      Page 2 of 4
                            TERBUFOS


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (continued)

    Solubility in Water:   15 ppm  (Farm Chemicals Handbook 1978, p. C62)

    Appearance and Odor:  Technical product:  clear,  colorless to pale
    yellow liquid  (Merck  1983, p. 1310).


SECTION  III -- FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):   190°F, 88°C (TOC)  (Merck 1983, p. 1310)
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing  Methods:  This is a liquid organophosphorus pesticide
    (Encyc Occupat Health and Safety 1983, p. 1620).  For small fires, use dry
    chemical,  carbon dioxide, water spray, or foam.   For large fires, use
    water  spray, fog, or  foam (DOT 1984, Guide 55).

    Special  Fire Fighting  Procedures:  This is a liquid organophosphorus
    pesticide (Encyc Occupat Health and Safety 1983,  p.  1620).  Wear positive
    pressure breathing apparatus and special protective clothing.  Move
    container from fire area if you can do so without risk.  Fight fire from
    maximum distance.  Dike fire control water for later disposal; do not
    scatter the material  (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:  This is a  liquid organophosphorus
    pesticide (Encyc Occupat Health and Safety 1983,  p.  1620).  Fire may
    produce irritating or poisonous gases (DOT 1984,  Guide 55).


SECTION  IV -- REACTIVITY  DATA

    Stability:   Unstable:
                Stable:  Yes (Farm Chemicals Handbook  1984, p. C62)

        Conditions to Avoid:  Hydrolyzes under alkaline conditions  (Farm.
        Chemicals Handbook 1984, p. C62).

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous  Decomposition or Byproducts:  Not  Found

    Hazardous  Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  13071-79-9
                                      Page 3 of 4
                            TERBUFOS
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Farm Chemicals Handbook 1984,  p.  C62)
                      Skin:  Yes  (Farm Chemicals Handbook 1984, p.  C62)
                      Ingestion:  Yes (Farm Chemicals Handbook 1984,  p.  C62)

    Health Hazards  (Acute, Delayed,  and  Chronic):  This material may be
    fatal  if swallowed,  inhaled, or absorbed through the skin.   Repeated
    inhalation or  skin contact may progressively increase susceptibility  to
    poisoning (Farm  Chemicals Handbook 1984, p. C62).

    Signs  and Symptoms of Exposure:  This material  is a liquid
    organophosphorus pesticide (Encyc Occupat Health and Safety 1983,  p.
    1620).  Symptoms of  organophosphorus pesticide poisoning are secondary to
    cholinesterase inhibition:   headache, giddiness,  blurred vision,
    nervousness, weakness, nausea, cramps, diarrhea and discomfort  in  the
    chest.  Signs  include  sweating, tearing, salivation,  vomiting,  cyanosis,
    convulsions, coma, loss of reflexes and loss of sphincter control  (Hayes
    1982,  p.  302).

    Medical  Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  This is a liquid organophosphorus
    pesticide (Encyc Occupat Health and Safety 1983,  p. 1620).   Move victim to
    fresh  air;  call  emergency medical care.  If not breathing,  give  artificial
    respiration.   If breathing is difficult, give oxygen.   In case  of  contact
    with material, immediately flush skin or eyes with running water for  at
    least  15 minutes.  Speed in  removing material from skin is of extreme
    importance.  Remove  and isolate contaminated clothing and shoes  at the
    site.   Keep victim quiet and maintain normal body temperature.   Effects
    may be delayed;  keep victim  under observation (DOT 1984, Guide  55).


SECTION  VI -- USE INFORMATION

    This material  is used  as a soil insecticide (Merck 1983, p. 1310).

-------
                                      CAS Registry Number:  13071-79-9
                                      Page 4 of 4
                            TERBUFOS


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    This is a liquid organophosphorus pesticide (Encyc Occupat Health and
    Safety 1983,  p.  1620).  Keep unnecessary people away;  isolate hazard area
    and deny entry.   Stay upwind; keep out of low areas.   Ventilate closed
    spaces before entering them.  Wear positive pressure  breathing apparatus
    and special protective clothing.  Remove and isolate  contaminated clothing
    at the site.   Do not touch spilled material; stop leak if you can do so
    without risk.   Use water spray to reduce vapors.  Small  spills:   absorb
    with sand or other noncombustible absorbent material  and place into
    containers for later disposal.  Large spills:   dike far  ahead of spill for
    later disposal (DOT  1984, Guide 55).


COMMENTS

    Sources searched but no information found:
        ACGIH 1983
        NIOSH/OSHA 1978
        Hawley 1981
        Weast 1979
        Sax 1984
        NFPA 1984
        Student 1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton and  Clayton 1981-82
        Arena 1979
        Gosselin 1984
        Buchel 1983
        Physicians'  Desk Reference 1985
        Gilman 1985

-------
                                            CAS Registry Number:   13171-21-6
                                            Page 1 of 4
                        EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date:  October 31, 1985
                                                    Revision:
CHEMICAL IDENTITY  --  PHOSPHAMIDON

CAS Registry Number:  13171-21-6

Synonyms:  Phosphoric Acid,  Dimethyl Ester, Ester with 2-Chloro-N,N-
Diethyl-3-Hydroxycrotonamide; l-Chloro-Diethylcarbamoyl-l-Propen-2-yl Dimethyl
Phosphate; 2-(N,N-Diethylcarbamoyl)-l-Methylvinyl Phosphate;  2-Chloro-2-
Diethylcarbamoyl-1-Methylvinyl Dimethyl Phosphate; 2-Chloro-2-Diethylcarbamyl-
1-Methylvinyl Dimethyl Phosphate; 2-Chloro-3-(Diethylatnino)-l-Methyl-3-Oxo-l-
Propenyl Dimethyl  Phosphate;  2-Chloro-N,N-Diethyl-3-Hydroxycrotonamide
Dimethyl Phosphate;  Crotonamide, 2-Chloro-N,N-Diethyl-3-Hydroxy-, Dimethyl
Phosphate; Dimecron; Dimecron 100; Dimecron 50; Dimecron-20;  Dimethyl
Phosphate of 2-Chloro-N,N-Diethyl-3-Hydroxycrotonamide;  Dixon; Famfos; Merkon;
N,N-Diethyl 2-Chloro-3-Dimethylphosphate Crotonamide;  NCI-C0058;
Phosphamidone;  Phosphoric Acid, 2-Chloro-3-(Diethylamino)-l-Methyl-3-Oxo-l-
Propenyl Dimethyl  Ester;  Sundaram 1975

Chemical Formula:  C QH  C1NO P

Molecular Weight:   299.70


SECTION I  —  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL: Not Found

    ACGIH TLV:  Not  Found

    IDLH:   Not Found

    Other Limits Recommended:  ADI in connection with  residues of
    pesticides  in  foods --  0.001 mg/kg (*Hayes 1975).  Toxicity information:
    LC5Q inhalation (mouse) 0.03 rag/liter/1 hour (*NIOSH/RTECS 1985).


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:   324°F, 162°C at  1.5 mmHg  (*Martin and Worthing 1974)


                      V
Specific Gravity (H 0=1):   1.2132 at  25°C/4°C  (*Martin and Worthing
    1974)

    Vapor  Pressure (mmHg):  2.5 x 10~J at 20°C (*Martin and Worthing 1974)

-------
                                      CAS Registry Number:  13171-21-6
                                      Page 2 of 4
                           PHOSPHAMIDON


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Melting  Point:  -49°F, -45°C (*Merck 1976)

    Vapor Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl  acetate=l):  Not Found

    Solubility in Water:   Miscible ('-Merck 1976)

    Appearance and Odor:  Pale yellow oily liquid (*Farm Chemicals Handbook
    1975),  faint  odor  (*Martin and Worthing 1974).


SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  (Non-Specific  --  Organophosphorus Pesticide,
    Liquid,  n.o.s.)  This material may burn,  but does not  ignite readily.  For
    small  fires,  use dry  chemical, carbon dioxide,  water spray, or foam.  For
    large  fires,  use water spray, fog, or foam (DOT 1984,  Guide 55).

    Special  Fire Fighting  Procedures:  (Non-Specific -- Organophosphorus
    Pesticide,  Liquid, n.o.s.)  Stay upwind;  keep out of low  areas.  Move
    containers  from  fire  area if you can do it without risk.  Fight fire from
    maximum  distance.  Dike fire control water for later disposal; do not
    scatter  the material  (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific -- Organophosphorus
    Pesticide,  Liquid, n.o.s.)  Container may explode in heat of fire (DOT
    1984,  Guide 55).  Heat may cause decomposition and evolution of highly
    toxic  fumes of phosphorus oxides and chlorides (*Sax 1975).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes, in neutral and acid media (*Martin
                         and Worthing 1974)

        Conditions to Avoid:  Hydrolyzes in alkali (*Martin and Worthing
        1974).

-------
                                      CAS Registry Number:  13171-21-6
                                      Page 3 of 4
                            PHOSPHAMIDON
SECTION  IV --  REACTIVITY DATA (Continued)

    Incompatibility (Materials to Avoid):  Hydrolyzes in alkali (*Martin
    and Worthing 1974)

    Hazardous Decomposition or Byproducts:  Decomposes above 320°F,  160°C
    (^Sunshine  1969); may emit highly toxic fumes of phosphorus oxides and
    chlorides (*Sax 1975).

    Hazardous Polymerization:  May Occur:  Not  Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (*Hawley 1977)
                      Skin:  Yes  (*Hawley 1977)
                      Ingestiort:   Yes (*Hawley 1977)

    Health Hazards (Acute, Delayed,  and  Chronic):  This material is
    extremely toxic; the probable oral lethal dose for humans  is  5-50 rag/kg,
    or between 7  drops and  1 teaspoonful for a 150-lb  person  (*Gosselin
    1976).  It is a  cholinesterase inhibitor (*Hawley  1977).

    Signs and Symptoms of Exposure:  Symptoms may include nausea, vomiting,
    abdominal cramps, diarrhea, excessive salivation,  headache, giddiness,
    weakness, muscle twitching, difficult breathing, blurring  or  dimness of
    vision,  and  loss of muscle coordination.   Death may occur  from  failure of
    the respiratory  center, paralysis of the respiratory muscles, intense
    bronchoconstriction, or all three (*Gosselin 1976).

    Medical  Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency and First Aid  Procedures:  (Non-Specific -- Organophoshorus
    Pesticide, Liquid, n.o.s.)  Move victim to fresh air;  call emergency
    medical  care.  If not breathing, give artificial respiration.   If
    breathing is  difficult, give oxygen.   In case of contact with material,
    immediately  flush skin or eyes with running water  for  at  least  15
    minutes.   Speed  in removing material from skin is  of extreme  importance.
    Remove and isolate contaminated clothing and shoes at  the  site.  Keep
    victim quiet  and maintain normal body temperature.  Effects may be
    delayed;  keep victim under observation (DOT 1984,  Guide 55).

-------
                                      CAS  Registry Number:  13171-21-6
                                      Page 4 of 4
                           PHOSPHAMIDON
SECTION VI  -- USE INFORMATION

    This material is an insecticide  for  citrus, cotton, and deciduous  fruit
    and nuts  (*SRI).  It is also an  acaricide  ("Farm Chemicals Handbook 1980).
SECTION  VII -- PRECAUTIONS FOR  SAFE  HANDLING AND  USE
(Steps to  be Taken in Case Material is  Released or Spilled)

    (Non-Specific -- Organophosphorus Pesticide, Liquid, n.o.s.)   Stay upwind;
    keep out of low areas.  Ventilate closed spaces before entering them.
    Wear positive pressure breathing  apparatus and special protective
    clothing.  Do not touch spilled material; stop leak if you can do so
    without risk.  Use water spray to reduce vapors.  Small  spills:  absorb
    with sand or other noncombustible absorbent material and place into
    containers for later disposal.  Large spills:  dike far  ahead of spill for
    later  disposal (DOT 1984, Guide 55).

-------
                                           CAS Registry Number:   13194-48-4
                                           Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  ETHOPROPHOS

CAS Registry Number:  13194-48-4

Synonyms:  Phosphorodithioic Acid, 0-Ethyl S,S-Dipropyl Ester; Mocap; ENT
27,318;  Ethoprop; Jolt; 0-Ethyl S,S-Dipropyl  Dithiophosphate;  0-Ethyl
S,S-Dipropyl Phosphorodithioate; 0-Ethyl  S,S-Dipropylphosphorodithioate;
Prophos; Rovokil; V-C Chemical V-C 9-104; VC  9-104; VC9-104

Chemical Formula:   CQH,-00PS0
                    o ly f.  /

Molecular Weight:  242.36


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LD-. oral (rat) 34

    mg/kg;  LD5Q dermal (rabbit) 26 mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -  PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:   187-196°F, 86-91°C at 0.2 mmHg ('^Worthing 1979)

    Specific Gravity (H20=l):   1.094 at 20°C  (*Worthing 1979)
    Vapor Pressure (mmHg):  3.5 x 10   at 26°C  (^Worthing 1979)

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:   750 mg/liter (*Worthing 1979)

    Appearance and Odor:  Clear, pale yellow liquid (^Worthing  1979).

-------
                                            CAS Registry Number:   13194-48-4
                                            Page 2 of 4
                            ETHOPROPHOS
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  (Non-Specific --  Organophosphorus Pesticide,
    Liquid,  n.o.s.)  This material may burn but does  not  ignite readily.  For
    small  fires,  use dry chemical, carbon dioxide,  water  spray, or foam.  For
    large  fires,  use water spray, fog, or foam (DOT 1984,  Guide 55).

    Special  Fire Fighting  Procedures:  (Non-Specific  -- Organophosphorus
    Pesticide,  Liquid, n.o.s.)  Stay upwind; keep out of  low  areas.  Move
    containers  from fire area if you can do it without  risk.  Fight fire from
    maximum  distance.  Dike fire control water for later  disposal; do not
    scatter  the material.  Wear positive pressure breathing apparatus and
    special  protective clothing (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific -- Organophosphorus
    Pesticide,  Liquid, n.o.s.)  Container may explode in  heat of  fire.  Fire
    and runoff  from fire control water may produce irritating or  poisonous
    gases  (DOT  1984, Guide 55).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes, in water (^Worthing 1979)

        Conditions to Avoid:  Hydrolyzed in alkali (^Worthing 1979).

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  13194-48-4
                                            Page 3 of 4
                             ETHOPROPHOS
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (Non-Specific -- Organophosphorus
                                  Pesticide) (Hayes 1982, p.  301)
                       Skin:   Yes  (Non-Specific  -- Organophosphorus
                              Pesticide)  (Hayes  1982, p. 301)
                       Ingestion:  Yes (*Gosselin 1976)

    Health Hazards  (Acute, Delayed,  and Chronic):   This material  is
    extremely toxic; the probable oral lethal dose for humans  is 5-50 mg/kg,
    or between 7 drops  and 1 teaspoonful  for a 150 Ib. person.   It is a
    cholinesterase inhibitor which affects the nervous system  (*Gosselin 1976)

    Signs and Symptoms of Exposure:   Symptoms  are  similar to parathion and
    may include  nausea, vomiting, abdominal cramps, diarrhea,  excessive
    salivation,  headache,  giddiness, weakness, muscle twitching, difficult
    breathing, blurring or dimness of vision, and loss of muscle
    coordination.   Death may occur from failure of the respiratory center,
    paralysis of the respiratory muscles, intense bronchoconstriction, or all
    three (*Gosselin 1976).

    Medical  Conditions  Generally Aggravated by  Exposure:  Not Found

    Emergency and  First Aid  Procedures:  (Non-specific -- Organophosphorus
    Pesticide, Liquid,  n.o.s.)  Move victim to fresh air; call  emergency
    medical  care.   If not  breathing, give artificial respiration.   If
    breathing is difficult, give oxygen.  In case of contact with material,
    immediately  flush skin or  eyes with running water for at least 15
    minutes.   Speed in  removing material  from skin is of extreme importance.
    Remove and isolate  contaminated clothing and shoes at the  site.  Keep
    victim quiet and maintain  normal body temperature.  Effects may be
    delayed;  keep victim under observation (DOT  1984, Guide 55).


SECTION  VI  --  USE INFORMATION

    This material is used  as an  insecticide and nematocide on  a number of
    crops (*SRI).

-------
                                           CAS Registry Number:  13194-48-4
                                           Page 4 of 4
                            ETHOPROPHOS
SECTION  VII -- PRECAUTIONS FOR  SAFE HANDLING AND  USE
(Steps  to  be Taken in Case Material  is  Released or Spilled)

    (Non-Specific -- Organophosphorus Pesticide, Liquid, n.o.s.)   Stay upwind;
    keep out of  low areas.  Ventilate closed spaces before entering them.
    Wear positive pressure breathing  apparatus and special protective
    clothing.  Do not touch spilled material; stop leak if you can do it
    without risk.  Use water spray to reduce vapors.  Small  spills:  take up
    with sand or other noncombustible absorbent material and place into
    containers for later disposal.  Large spills:  dike far  ahead of spill for
    later  disposal (DOT 1984, Guide 55).

-------
                                     CAS Registry Number:  13410-01-0
                                     Page  1 of 3
                       EPA CHEMICAL  PROFILE
                                                  INTERIM
                                                  Date: October 31,  1985
                                                  Revision:
CHEMICAL IDENTITY -- SODIUM  SELENATE

CAS Registry Number:  13410-01-0

Synonyms:  (NIOSH/RTECS  1983 SYNONYMS, VOLUME 3, p. 580)  Selenic Acid,
Disodium Salt; Disodium Selenate;  P-40;  Sel-Tox SS02 and SS-20; Selenic Acid
(H SeO,),  Disodium Salt

Chemical Formula:  Na2SeO,

Molecular Weight:  188.94


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH TLV:  Air:  TWA  200 ug(selenium)/m3  (NIOSH/RTECS  1983, p. 580)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD5~ oral (rat) 2.5

    mg/kg (*NIOSH/RTECS 1985)


SECTION  II —  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H.0=l): 3.098 (Sax 1984,  p.  1254)

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl  acetate=l):   Not Found

    Solubility in Water:  Very soluble  (Merck  1983,  p.  1241)

    Appearance and Odor:  Colorless  rhombic crystals  (Sax 1984, p.  1254)

-------
                                      CAS Registry Number:   13410-01-0
                                      Page 2 of 3
                         SODIUM  SELENATE
SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing Methods:  Dry chemical,  carbon dioxide, water spray,  fog,
    or foam.   Move container from fire area if  it can be done without risk
    (DOT 1984, Guide 53).

    Special Fire Fighting Procedures:   Stay upwind; keep out of low areas.
    Wear self-contained  (positive pressure  if available) breathing apparatus
    and full protective  clothing (DOT 1984,  Guide 53).

    Unusual Fire and Explosion Hazards:  Fire  may produce  irritating or
    poisonous  gas  (DOT 1984, Guide 53).


SECTION  IV --  REACTIVITY DATA

    Stability:  Unstable:   Not Found
                 Stable:   Not Found

        Conditions to Avoid:  Decomposing heat  (Sax 1984, p. 1254)

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Emits toxic selenium and sodium
    oxide  fumes  when heated to decomposition (Sax 1984, p. 1254).

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (DOT 1984, Guide 53)
                      Skin:  Not Found
                      Ingestion:   Yes (Sax  1984, p. 1254)

    Health Hazards (Acute, Delayed, and Chronic):  Causes damage to  liver
    and kidneys.  Resembles arsenic in its  effects  (Sax 1984, p. 1254).

-------
                                      CAS Registry Number:   13410-01-0
                                      Page 3 of 3
                         SODIUM SELENATE
SECTION  V -- HEALTH  HAZARD DATA (Continued)

    Signs and Symptoms of Exposure:   (Non-Specific -- Selenium  Compounds)
    Garlic odor  of breath is common.  Pallor,  nervousness, depression, and
    digestive disturbances.  Inorganic selenium compounds can cause dermatitis
    (Sax 1984, p. 2390).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid Procedures:   Move victim  to fresh air.  Remove
    contaminated clothing and shoes at site.   In case of contact,  immediately
    flush skin or eyes with running water  for  at least  15 minutes (DOT 1984,
    Guide 53).


SECTION  VI  --  USE INFORMATION

    Insecticide  in some horticultural applications  (Merck 1983, p. 1241).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING  AND USE
(Steps to be  Taken in Case Material is Released or  Spilled)

    Avoid breathing dust (see Section V above).   Keep unnecessary people away;
    isolate hazard area and deny entry. Stay  upwind; keep out of low areas.
    Wear self-contained  (positive pressure if  available) breathing apparatus
    and full  protective clothing.   Do not  touch spilled material;  stop leak if
    you can do so without risk.  Small spills:   absorb  with sand or other
    noncombustible absorbent material and  place into containers for later
    disposal.  Small dry spills:  with clean shovel place material into clean,
    dry container and cover; move containers from spill area.  Large spills:
    dike far  ahead of spill for later disposal (DOT 1984, Guide 53).

-------
                                    CAS Registry Number:  13450-90-3
                                    Page 1 of 3                     I
                      EPA CHEMICAL  PROFILE
                                                  INTERIM
                                                  Date: October 31,  1985
                                                  Revision:
CHEMICAL  IDENTITY  -- GALLIUM TRICHLORIDE

CAS Registry Number:  13450-90-3

Synonyms:   (NIOSH/RTECS 1983 Synonyms,  Volume 2,  p.  362)  Gallium(3+)
Chloride

Chemical  Formula:  GaCl

Molecular Weight:   176.07


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:  LC.   inhalation
    (rat) 0.191 mg/liter (*NIOSH/RTECS  1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  394°F,  201.3°C  (Weast 1978, p. B-119)

    Specific Gravity (H20=l):  2.47 at 25°C/4°C  (Weast 1978,  p.  B-119)

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  172°F,  78°C  (Sax 1984, p.  1470)

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate  (Butyl acetate=l):  Not  Found

    Solubility in Water:  Very soluble  (Weast  1978,  p. B-119); very soluble
    in either hot or cold water (Clayton and Clayton 1981-82, p. 1632)

    Appearance and Odor:  Colorless needles (Sax 1984, p.  1470)

-------
                                     CAS Registry Number:  13450-90-3
                                     Page 2 of 3
                       GALLIUM TRICHLORIDE
SECTION  III  --  FIRE AND EXPLOSION  HAZARD  DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        DEL:  Not Found

    Extinguishing  Methods:  Not Found

    Special Fire  Fighting  Procedures:   Not Found

    Unusual Fire and Explosion Hazards:   Not Found


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Decomposes upon sufficient heating (Sax  1984,
        p.  1470)

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Emits toxic chloride  fumes when
    heated to decomposition (Sax  1984,  p.  1470)

    Hazardous Polymerization:  May Occur:  Not  Found
                              May Not Occur:  Not  Found

        Conditions to Avoid:  Not  Found


SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (Sax  1984, p.  1470)
                      Skin:  Not  Found
                      Ingestion:  Not  Found

    Health  Hazards (Acute,  Delayed,  and Chronic):   (Non-Specific -- Gallium
    Compounds)   In view of the toxicity of gallium and its compounds,  as shown
    by experiments, all persons involved in work with these substances should
    undergo periodic medical examinations, during which special  attention
    should be paid to the condition of  the liver, kidneys, respiratory organs,
    and skin  (Encyc Occupat Health and  Safety 1983, pp. 938-939).

-------
                                           CAS Registry Number:  13450-90-3
                                           Page 3 of 3
                       GALLIUM TRICHLORIDE


SECTION  V --  HEALTH HAZARD DATA  (Continued)

    Signs and Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency  and First Aid Procedures:   (Non-Specific -- Poisonous  Solid,
    n.o.s.)   Move victim to fresh air; call emergency medical care.  Remove
    and" isolate  contaminated clothing and  shoes  at the site.  In case  of
    contact with material, immediately flush skin or eyes with running water
    for at least 15 minutes (DOT 1984, Guide 53).


SECTION  VI  --  USE INFORMATION

    Used as a raw material in the production of  metallic gallium (Hawley  1981,
    p.  488);  and in the processing of monocrystal semi-conductor compounds
    (Encyc Occupat Health and Safety 1983, p. 938).


SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps  to be  Taken in Case Material is Released  or Spilled)

    Avoid inhalation and skin contact; wear proper respiratory protection and
    protective clothing (see Section V above).


COMMENTS

    Other sources checked but no information found:
        ACGIH 1983
        Merck 1983
        BASE  1980
        NIOSH/OSHA 1978
        Hayes 1982
        Doull 1980
        Gosselin 1984
        DOT 1984
        NFPA  1984
        Student  1981
        Weiss 1980
        Farm  Chemicals Handbook 1984
        Verschueren 1983

-------
                                     CAS Registry Number:   13454-96-1
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31.  1985
                                                   Revision:
CHEMICAL IDENTITY -- PLATINUM TETRACHLORIDE

CAS Registry Number:  13454-96-1

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 3,  p.  251)  Platinuro(IV)
Chloride;  Platinic Chloride (Hawley 1981, p.  824)

Chemical Formula:   PtCl,

Molecular  Weight:  336.89


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  (Non-Specific  --  Platinum, Soluble Salts)  0.002 rag/m1
    (NIOSH/OSHA  1978, p. 158))

    ACGIH TLV:  (Non-Specific -- Platinum, Soluble Salts)   0.002 mg/raj
    (ACGIH 1983, p. 29)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD5Q oral  (rat)  2
    mg/kg (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not  Found

    Specific Gravity (H20=l):  4.303 at 25°C  (Weast  1979, p.  B-106)

    Vapor Pressure (mmHg): Not Found

    Melting Point:   decomposes at 698°F, 370°C  (Weast 1979, p. B-106)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:  58.7 g in 100  mL of cold water, very soluble in
    hot water (Weast 1979, p. B106)

    Appearance  and Odor:  Brown-red crystals (Weast 1979, p. B-106)

-------
                                     CAS Registry Number:   13454-96-1
                                     Page 2 of 3
                      PLATINUM TETRACHLORIDE
SECTION  III  --  FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
         LEL:  Not Found
         UEL:  Not Found

    Extinguishing  Methods:  Not Found

    Special Fire  Fighting  Procedures:  Not Found

    Unusual Fire and Explosion Hazards:  Toxic fumes of chloride are
    emitted when heated to decomposition. (Sax 1984,  p.  2246)


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not  Found
                Stable:   Not Found

         Conditions to Avoid:   Decomposing heat (Sax 1984, p. 2246)

    Incompatibility  (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:   Toxic fumes of chloride are
    emitted, when heated to decomposition (Sax 1984,  p.'  2246).

         Conditions to Avoid:   Not Found

    Hazardous Polymerization:   May Occur:   Not Found
                              May Not Occur:  Not Found


SECTION  V -- HEALTH HAZARD  DATA

    Routes of Entry:   Inhalation:  Yes  (Sax 1984,  p.  2246)
                      Skin:   Yes  (Sax  1984, p. 2246)
                      Ingestion:   Not Found

    Health Hazards (Acute, Delayed,  and Chronic):  Moderate oral toxicity
    and a  dermal irritant  (Sax  1984, p. 2246).

-------
                                      CAS Registry Number:  13454-96-1
                                      Page 3 of 3
                       PLATINUM TETRACHLORIDE
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Signs and Symptoms of Exposure:  Toxicity is similar to .that of other
    platinum compounds.  Symptoms include wheezing,  coughing,  running of the
    nose,  tightness  of the chest, shortness of breath,  and bluing  of the
    skin.   In addition, platinum salts appear to cause  dermatitis.  (Sax 1984,
    p.  2246)

    Medical  Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid Procedures:   Toxicity  is  similar to  that of
    other  platinum compounds.  For symptoms arising  from chronic exposures,
    removal  from exposure effectively causes the symptoms to disappear. (Sax
    1984,  p. 2246).   (Non-Specific -- Platinum, Soluble Salts)  Get medical
    attention immediately.   In case of eye contact,  immediately wash the eyes
    with large amounts of water.  If this  chemical gets on the skin,
    immediately  flush with water.  If a person breathes in large amounts of
    this chemical, move to fresh air at once.  If breathing has stopped,
    perform  artificial respiration.  Keep the victim warm and  at rest.  If
    this chemical has been swallowed and the person  in  conscious,  immediately
    give large quantities of water and try to get the person to vomit by
    having him touch the back of his throat with his finger (NIOSH/OSHA 1978,
    p.  158).


SECTION  VI --  USE INFORMATION

    Platinum tetrachloride is used commercially in a variety of applications
    as  chloroplatinic acid,  including electroplating, platinizing  pumice for
    catalysts,  etching zinc  for printing,  platinum mirrors,  indelible ink,
    ceramics (producing fine color effects on high grade porcelain), and
    microscopy (Hawley 1981, pp. 824, 241).


SECTION  VII  —  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps  to  be Taken in Case Material is Released or Spilled)

    Do  not touch spilled material.  Wear full protective clothing, eye
    protection and positive pressure breathing apparatus (see  Section V above)

-------
                                      CAS Registry Number:  13463-39-3
                                      Page 1  of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October  31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- NICKEL CARBONYL

CAS Registry Number:   13463-39-3

Synonyms:  Nickel Carbonyl; Nickel Carbonyl [Ni(CO),], (T-4)-; Nickel
Tetracarbohyl; Tetracarbonyl Nickel;  UN  1259

Chemical Formula:  C.NiO.
                    4   4
Molecular  Weight:   170.75


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   TWA 7 ug/m3 (*NIOSH/RTECS  1985)

    ACGIH TLV:   TWA 0.05  ppm; 0.35 mg/mj  as  nickel (*ACGIH 1983)

    IDLH:  0.001 ppm (NIOSH/OSHA  1978, p.  138)

    Other Limits  Recommended:  Not  Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  109°F,  43°C (*Merck 1983)

    Specific Gravity (H20=l):   1.318  at 17°C (*Merck 1983)

    Vapor Pressure (mmHg):  400  at 25.8°C  (*Hawley 1981)

    Melting Point:  -2.2°F, -19.3°C  (*Merck 1983)

    Vapor Density  (AIR=1):  5.89  (NFPA  1984, p. 325M-74)

    Evaporation  Rate (Butyl acetate=l):   Not Found

    Solubility in Water:  Soluble  in about 5000 parts water free from  air
    (*Merck 1983)

    Appearance and Odor:  Nickel carbony1 exists as a gas or as  a colorless
    liquid (*Merck 1983; *Hamilton and Hardy 1974).  It has a peculiar sooty
    odor (^Clayton and Clayton 1982).

-------
                                      CAS Registry Number:  13463-39-3
                                      Page 2  of 4
                          NICKEL CARBONYL
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  Less than -18°C (no method given)  (*NFPA
    1978)
    Flammable Limits:  Flammable and burns with a yellow flame (*Clayton
    and Clayton 1982)
        LEL:   2% (NIOSH/OSHA 1978, p.  138)
        UEL:   Not Found

    Extinguishing Methods:  Use water, alcohol foam,  carbon dioxide,  dry
    chemical (*NFPA  1978).  Use water in flooding quantities as fog.   Solid
    streams of  water may be ineffective (Student 1981, p.  363).

    Special  Fire Fighting Procedures:  Material is too dangerous to health
    to expose fire fighters.  A few whiffs of the vapor could cause death.   If
    liquid or vapor  penetrates fire fighter's protective gear it will  cause
    fatality.   Normal full  protective gear available to the average fire
    department  will  not provide adequate inhalation or skin protection (*NFPA
    1978).

    Unusual Fire and Explosion Hazards:  Vapor  forms  explosive mixtures
    with air.   Vapor is heavier than air and may travel a considerable
    distance to source of ignition and flash back (*NFPA 1978).  Liquid may
    explode when heated under confinement (NFPA 1984,  p. 49-66).  Vapor
    explosion and poison hazard indoors, outdoors, or in sewers.  Runoff  to
    sewer  may create fire and explosion (*DOT 1984).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Yes  (Weiss 1980, p. 646)
                 Stable:

        Conditions to Avoid:  Contact with air ("Clayton and Clayton
        1981-82).  Contact  with heat, acid,  or acid fumes (*Sax 1979).
        Ignition sources and vapors entering a confined space (*NIOSH/OSHA
        1981).

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous  Decomposition or Byproducts:   May explode at 68°F (20°C)  in
    presence of air  or oxygen (^Clayton and Clayton 1981-82).  Emits highly
    toxic  fumes when heated or on contact with acid or acid fumes (*Sax 1979).

    Hazardous  Polymerization:  May Occur:   Not  Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not  Found

-------
                                            CAS Registry Number:   13463-39-3
                                            Page 3 of 4
                          NICKEL CARBONYL
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Yes  (-DOT  1984)
                       Skin:   Yes  (*DOT 1984)
                       Ingestion:   Yes  (*DOT 1984)

    Health Hazards  (Acute, Delayed, and Chronic):  Probable oral  lethal
    dose for a human is between  50  and  500 mg/kg, between one teaspoon and one
    dunce per 150 Ib.  person  (*Gosselin 1976).  Nickel carbonyl has also been
    estimated to be lethal in man at  atmospheric  exposures of 30 ppm for 20
    minutes (*Doull 1980).  Autopsies show congestion, collapse, and tissue
    destruction, as well as hemorrhage  in the brain  ("Hamilton and Hardy
    1974).  Dermatitis, recurrent asthmatic attacks, and increased number of
    white blood cells  (eosinophils) in  respiratory tract are acute health
    hazards (*DOT 1984).   Nickel carbonyl is poisonous.  It can be fatal if
    inhaled,  swallowed, or absorbed through skin.  Vapors may cause
    irritation, congestion, and  edema of lungs  ("Merck 1983).

    Signs and  Symptoms  of Exposure:   Symptoms include:   frontal  headache,
    vertigo,  chest tightness,  weakness, sweating, cough, vomiting, and
    difficulty in breathing (^Hamilton  and Hardy  1974).

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air; call
    emergency medical  care.  If  necessary administer artificial respiration.
    If breathing is difficult, give oxygen.  Remove and isolate contaminated
    clothing and shoes  at site.  For  fifteen minutes wash away any material
    that may have contacted body with copious amounts of soap and water
    (Student 1981, p.  363).  Irrigate eyes with plain tap water.  Keep victim
    quiet and maintain normal body  temperature.   Maintain observation in case
    of delayed effects  (*DOT  1984).


SECTION  VI  -- USE INFORMATION

    Nickel carbonyl is  used to nickel-coat steel  and other metals  (Student
    1981,  p.  363).  It  is also used in  the electronics industry (*Doull 1980).

-------
                                            CAS Registry Number:   13463-39-3
                                            Page 4 of 4
                         NICKEL  CARBONYL
SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be  Taken  in Case Material is Released or Spilled)

    Material  is  extremely dangerous and may explode.   Avoid inhalation and
    skin contact.   Normal full protective gear will not  provide adequate
    protection (see Sections III, IV, and V above).   Remove all ignition
    sources.   Ventilate area of spill.  Atomize large quantities in a
    combustion chamber equipped with an effluent gas  cleaning device.  Nickel
    carbonyl  should not be allowed to enter a confined space (such as a sewer)
    because of the  possibility of an explosion (*NIOSH/OSHA 1981).  Isolate
    hazard area  and deny entry.  Stay upwind and out  of  low areas.  Isolate
    for 1/2 mile in all directions.  Do not touch spilled  material; stop leak
    if you can do so without risk.  Use water spray to reduce vapors (*DOT
    1984).

-------
                                           CAS  Registry Number:  13463-40-6
                                           Page 1  of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- IRON,  PENTACARBONYL-

CAS Registry Number:  13463-40-6

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume 2, p.547-548)  Iron .
Carbonyl;  -Pentacarbonyliron

Chemical Formula:   Fe(CO)

Molecular  Weight:  195.90


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  TWA 0.1 ppm (0.8 mg/m3); STEL 0.2 ppm  (1.6 mg/m3)
    (ACGIH 1985, p.  21)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information: "LC..   inhalation
    (rabbit)  2 mg/liter/45 minutes; I"Crn inhalation (rat) 0.044 mg/liter;
    LD5Q oral  (rabbit) 12  rag/kg  (*NIOSH/RTECS  1985)


SECTION  II — PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   216.8°F, 102.8°C at  749 mmHg (Weast 1979, p. B-126)

    Specific Gravity (H20=l):  1.457 at  21°C (Weast 1979, p.  B-126)

    Vapor Pressure (mmHg):  40  at  30.3°C (Sax 1984,  p.  2125)

    Melting Point:   -5.8°F,  -21°C (Weast 1979, p. B-126)

    Vapor Density (AIR=1):   6.74  (NFPA 1984,  p. 325M-60)

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Insoluble  (Weast 1979,  p.  B-126)

    Appearance and Odor:  Viscous yellow liquid  (Weast 1979, p.  B-126)

-------
                                      CAS Registry Number:  13463-40-6
                                      Page 2 of 4
                        IRON,  PENTACARBONYL-
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  5°F, -15°C (Hawley 1981, p.  572)
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  This material is incompatible with water (Sax .
    1984,  p. 2125).  Use  dry chemical,  carbon dioxide, water spray, or foam
    for small fires, and  water  spray, fog, or foam for large fires.  Move
    material from fire area if  this can be done without risk.  Dike fire
    control water for later disposal (DOT 1984, Guide 28).

    Special  Fire Fighting Procedures:   Isolate hazard area and deny entry.
    Stay upwind and keep  out of low areas.  Isolate area for 1/2  mile in all
    directions if tank car  or truck is  involved in fire.  Wear positive
    pressure breathing apparatus and special protective clothing.  Cool
    containers exposed to flames with water until fire is out. Withdraw
    immediately in case of  rising sound from venting safety device or any
    discoloration of tank due to fire (DOT 1984, Guide 28).

    Unusual  Fire and Explosion Hazards:  This material, may  be ignited by
    heat,  sparks,  or flames.  Vapors may travel to ignition source and flash
    back.   Containers may explode in the heat of fire.  Evolution of carbon
    monoxide may create a poison hazard.  This material presents  a vapor
    explosion and poison  hazard indoors, outdoors, or in" sewers (DOT 1984,
    Guide  28).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:  Yes  (Hawley  1981, p. 572)
                 Stable:

        Conditions  to Avoid:   Decomposes  in acids and alkalies (Hawley
        1981,  p.  572).  Protect from  light and air (Merck 1983, p. 736).

    Incompatibility  (Materials  to Avoid):  Acetic acid, water, nitrogen
    oxide,  transition metal halides,  and zinc (Sax 1984, p. 2125), and it
    burns  in air  (Merck 1983,  p. 736).

    Hazardous Decomposition or Byproducts:  Evolves carbon monoxide on
    exposure to  air or to  light (Hawley 1981, p. 572).  Emits carbon monoxide
    when heated  to  decomposition (Sax 1984, p. 2125).

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not  Found

        Conditions  to Avoid:   Not  Found

-------
                                      CAS Registry Number:  13463-40-6
                                      Page 3 of 4
                        IRON,  PENTACARBONYL-
SECTION V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (Hawley 1981, p. 572)
                       Skin:   Yes  (Hawley  1981, p. 572)
                       Ingestion:  Yes (Hawley 1981,  p. 572)

    Health Hazards  (Acute, Delayed,  and Chronic):  Toxicity of this
    compound is  high via all  routes of entry.  Cyanosis (bluish discoloration
    of skin) and circulatory  collapse may occur after exposure.   Death may
    result.   Pneumonitis and  injury to the kidneys, liver, and central nervous
    system may also  occur (Merck 1983, p. 736; Sax 1984, p.  2125).

    Signs and Symptoms of Exposure:   Inhalation  may  result in dizziness,
    nausea,  and  vomiting;  if  exposure continues, unconsciousness  will  follow.
    Delayed reactions include chest pain, cough, and difficult breathing (Sax
    1984, p.  2125).

    Medical  Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air and call
    emergency medical care.   If victim is not breathing, give artificial
    respiration;  if  breathing is difficult, give oxygen.  Remove  and isolate
    contaminated clothing at  site.  In case of contact with material,
    immediately  flush skin or eyes with running water for at least  15
    minutes.   Keep victim quiet and maintain normal body temperature.   Keep
    victim under observation  since effects may be delayed (DOT 1984, Guide 2"8).
SECTION  VI  --  USE  INFORMATION

    Iron carbonyl  is  used  as a catalyst in organic reactions;  to make carbonyl
    iron which is  used  in  high frequency coils for the radio and television
    industry;  and  as  an anti-knock agent in motor fuels (Merck 1983,  p.  736).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be  Taken in Case Material is Released or Spilled)

    Do not breathe vapors.  Wear proper respiratory protection and full
    protective clothing (see Section V above).   Shut off or  remove ignition
    sources in hazard area.  Do not touch spilled material.   Stop leak if  this
    can be done  without risk.  Use water spray to reduce vapors.  Take up
    small spills with sand or other noncombustible absorbent material and
    place into containers  for later disposal.  Dike far ahead of large spills
    for later disposal  (DOT 1984, Guide 28).

-------
                                     CAS  Registry Number:  13463-40-6
                                     Page 4 of 4
                       IRON, PENTACARBONYL-
COMMENTS
    Sources searched but no information found:
        BASE 1980
        Weiss 1980
        Clayton and Clayton 1981-82
        Oilman 1985
        Gosselin 1981
        OSHA 1984
        Hayes 1982
        Student 1981
        Doull 1980
        NIOSH/OSHA 1978

-------
                                           CAS Registry Number:   13494-80-9
                                           Page 1 of 3
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- TELLURIUM

CAS Registry Number:   13494-80-9

Synonyms:  Aurum Paradoxum; Metallum Problematum

Chemical Formula:  Te

Molecular  Weight:   127.60


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   0.1 mg/m3 as Tellurium  (NIOSH/OSHA 1978,  p.  172-173)

    ACGIH TLV:   TWA 0.1 mg/m3 as Tellurium  (*ACGIH 1980)

    1DLH:  Not Found

    Other Limits  Recommended:  Toxicity information:  LD   oral (mouse)

    20 mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  1814°F, 989.9°C (amorphous powder) (*Merck 1976);
    2534°F, 1390°C  (crystalline solid) (Weast 1984, p. B-146)

    Specific Gravity (H20=l):   6.24 (Weiss 1980,  p.  1158)

    Vapor Pressure (mmHg):   1 at  520°C  (Sax 1984,  p.  2501)

    Melting Point:  842°F, 449.8°C (*Merck 1976)

    Vapor Density  (AIR=1):   Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not Found

    Solubility in Water:   Insoluble (Merck 1983, p.  8970)

    Appearance and Odor:  Grayish-white, lustrous, brittle,  crystalline
    solid; dark-gray to brown, amorphous powder with metal characteristics
    (*Merck 1976).

-------
                                      CAS Registry Number:   13494-80-9
                                      Page 2 of 3
                             TELLURIUM
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Use water spray (Weiss 1980, p.  1158).
    Tellurium will burn only  slowly in air  (Clayton and Clayton 1981-82, p.
    2137).

    Special  Fire Fighting  Procedures:  Straight water streams will scatter
    molten tellurium oxide.  Wear goggles,  rubber gloves, and proper
    respirator with  filter  (Weiss 1980, p.  1158).

    Unusual  Fire and Explosion Hazards:   A finely  divided suspension of
    elemental tellurium in  air will explode  ("NFPA 1978).  Burning tellurium
    produces toxic tellurium oxide gas  (Weiss 1980, p. 1158).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (*Encyc Occupat Health and Safety 1971)

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Solid sodium (*NFPA 1978);
    halogens,  interhalogens, metals, hexalithium disilicide (Sax 1984,  p.
    2501).   Reacts with nitric acid; reacts with concentrated sulfuric  acid
    forming a red solution.  Dissolves in potassium hydroxide in the presence
    of air with formation of deep red solution; combines with halogens  (Merck
    1983,  p.  1307).  Antimony and chlorine trifluoride; chlorine trifluoride
    reacts  vigorously with  tellurium producing flame.  Fluorine and tellurium
    react  with incandescence.  Lithium silicide attacks tellurium with
    incandescence.   Reaction with zinc is accompanied by incandescence  (same
    potential with cadmium, only hazard is  less).  A vigorous reaction  results
    when liquid tellurium is poured over solid sodium (*NFPA 1978).

    Hazardous  Decomposition or Byproducts:  When heated to decomposition,
    it emits toxic fumes of tellurium oxide  (Sax 1984, p. 2501).

    Hazardous  Polymerization:  May Occur:   Not  Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found

-------
                                       CAS  Registry Number:   13494-80-9
                                       Page 3 of 3
                             TELLURIUM
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (NIOSH/OSHA 1978, p. 172-173)
                       Skin:   Yes  (NIOSH/OSHA  1978, p.  172-173)
                       Ingestion:  Yes  (NIOSH/OSHA 1978, p. 172-173)

    Health Hazards  (Acute, Delayed,  and Chronic):   Causes  central  nervous
    system depression (Merck  1983, p. 1307).  Moderate skin and eye irritant
    (Weiss 1980,  p.  1158).  Tellurium is capable of doing harm within the body
    by replacing  the essential element  sulfur  (Arena 1979,  p. 269).

    Signs and Symptoms of Exposure:   Garlic  odor  to breath  and sweat,
    metallic taste,  dryness of mouth, nausea, vomiting,  loss of appetite, and
    somnolence (*Gosselin  1976;  "Browning  1969; *Dreisbach 1977).   Dermatitis
    (NIOSH/OSHA  1978, p.  172-173).

    Medical  Conditions  Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid Procedures:  Get medical attention
    immediately.   If this  chemical gets in the eyes, immediately wash the eyes
    with large amounts  of  water.  It is gets on the skin, wash with soap or
    mild detergent and water.   If a person breathes in large amounts of the
    material,  move the  victim  to fresh  air at once.  If breathing has stopped,
    perform artificial  respiration.  Keep the victim warm and at rest.   If the
    material has  been swallowed and the victim is conscious, immediately give
    large quantities of water,  then try to get the victim to vomit by having
    him touch the back  of  his  throat with his finger.  Do not make an
    unconscious person  vomit  (NIOSH/OSHA 1978, p.  173).


SECTION  VI -- USE INFORMATION

    Coloring agent in chinaware, porcelains, enamels, glass; producing black
    finish on silverware;  semiconductor devices and research; manufacturing
    special alloys of marked electrical resistance (*Merck 1976).   Improves
    mechanical properties  of  lead; powerful carbide stabilizer in cast iron
    (-Encyc Occupat  Health and Safety 1971); tellurium vapor in "daylight"
    lamps, vulcanization of rubber ("Clayton and Clayton 1981-82).   Blasting
    caps (*Weast  1979).  Semiconductor  research (Merck 1983, p. 1307).


SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    Ventilate area of spill or leak; collect spilled material in the most
    convenient and safe manner and deposit in sealed containers for
    reclamation or for  disposal in a secured sanitary landfill.  Liquids
    containing tellurium should be absorbed in vermiculite, dry .sand, earth or
    a similar material  (*NIOSH/OSHA 1981).  Wear proper respiratory protection
    and full protective clothing (see Section V above).

-------
                                           CAS  Registry Number:  14167-18-1
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- SALCOMINE

CAS Registry Number:  14167-18-1

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume 1,  p. 950)  Cobalt,
N,N' -Ethylenebis(Salicylideneiminato)-; bis(Salicylaldehyde)Ethylenediimine
Cobalt(II) ; Cobalt, ((2,2* -(l,2-Ethanediylbis(Nitrilomethylidyne) )bis
(Phenolato))(2-)-N,N' ,0,0')-;  Cobalt,  ( (alpha, alpha' -(Ethylenedinitrilo)
Di-o-Cresolato)(2-))-;  N,N' -Ethylenebis(Salicylideneiminato)Cobalt(II) ;
Salcomin;  Salcomine Powder
Chemical Formula:   C^P^CoN Q

Molecular Weight:  325.25
SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC,   inhalation
    (mouse) 0.39 mg/ liter (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure (mmHg):   Not Found

    Melting Point:   Not Found

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:  Not Found

-------
                                     CAS Registry Number:  14167-18-1
                                     Page 2 of 3
                            SALCOMINE


SECTION III  -- FIRE AND EXPLOSION HAZARD DATA

    Flash Point (Method  Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Not Found

    Special Fire Fighting Procedures:  Not Found

    Unusual Fire  and Explosion Hazards:  Not Found


SECTION IV  -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:   Not Found

        Conditions to Avoid:   Not Found

    Incompatibility (Materials  to Avoid):   Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:  Not Found
                              May Not Occur:   Not  Found

        Conditions to Avoid:   Not Found


SECTION V -- HEALTH  HAZARD DATA

    Routes  of Entry:  Inhalation:  Not Found
                     Skin:   Not Found
                      Ingestion:   Not Found

    Health Hazards  (Acute, Delayed,  and Chronic): Not Found

    Signs and Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated by  Exposure:   Not Found

    Emergency and  First Aid Procedures:   Not Found

-------
                                          CAS Registry Number:  14167-18-1
                                          Page 3 of 3
                           SALCOMINE
SECTION VI -- USE  INFORMATION

    Not  Found
SECTION VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps  to be Taken in Case Material is  Released or Spilled)

    Not Found
COMMENTS

    Sources searched but no information  found:
       Weast 1979
       Sax 1984
       Hawley 1981
       Hayes 1982
       Gosselin 1984
       Clayton and Clayton 1981-82
       DOT 1984
       Merck 1983
       Physicians' Desk Reference 1985
       Oilman 1985
       Verschueren 1983
       Farm Chemicals Handbook 1984
       Encyc Occupat Health and Safety  1983
       Doull 1980
       Weiss 1980

-------
                                     CAS  Registry Number:  15271-41-7
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  BICYCLO[2.2.l]HEPTANE-2-CARBONITRILE,
5-CHLORO-6-((((METHYLAMINO)CARBONYL)OXY)IMINO)-,(1S-(1 ALPHA,
2 BETA, 4 ALPHA, 5 ALPHA, 6E))-

CAS Registry  Number:  15271-41-7

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume 2, p. 865)
2-Norbornanone, endo-3-Chloro-exo-6-Cyano-,  0-(Methylcarbamoyl)Oxime;
endo-3-Chloro-exo-6-Cyano-2-Norbornanone 0-(Methylcarbamoyl)Oxime;
2-exo-Chloro-6-endo-Cyano-2-Norbornanone-0-(Methylcarbamoyl)Oxime;
3-Chloro-6-Cyano-2-Norbornanone-0-(Methylcarbamoyl)Oxime; 3-Chloro-6-
Cyanonorbornanone-2 Oxime 0,N-Methylcarbamate; 5-Chloro-6-((((Methylamino)
Carbonyl)Oxy)Imino)Bicyclo[2.2.1]Heptane-2-Carbonitrile;  exo-5-Chloro-6-
Oxo-endo-2-Norbornanecarbonitrile 0-(Methylcarbamoyl)Oxime;
Compound UC-20047 A; ENT  25,962; Tranid; UC  20047; UC 20.047A

Chemical Formula:   C1QH12C1N302

Molecular Weight:  241.70


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD5Q oral (rat)

    19 mg/kg ("-NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H 0=1):  Not  Found

    Vapor Pressure (mmHg):   Not Found

    Melting Point:   318-320°F, 159-160°C (Merck 1983,  p.  1369)

    Vapor Density (AIR=1):   Not Found

-------
                                     CAS Registry Number:  15271-41-7
                                     Page 2 of 4


               BICYCLO[2.2.l]HEPTANE-2-CARBONITRILE,
    5-CHLORO-6-((((METHYLAMINO)CARBONYL)OXY)IMINO)-,(1S-(1 ALPHA,
                  2 BETA, 4 ALPHA, 5 ALPHA, 6E))-
SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Evaporation Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Not  Found

    Appearance and Odor:  Not Found


SECTION  III  -- FIRE  AND  EXPLOSION HAZARD DATA

    Flash  Point (Method  Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:  Not Found

    Extinguishing  Methods:   A carbamate insecticide (Buchel 1983,  p.  127).
    Extinguish with dry  chemical, carbon dioxide,  water spray, fog, or foam
    (DOT 1984, Guide 55).

    Special Fire  Fighting Procedures:  A carbamate insecticide (Buchel
    1983,  p.  127).  Move container from fire area  if you can do so without
    risk.   Fight fire from  maximum distance.  Dike fire control water for
    later  disposal; do not  scatter the material.   Keep unnecessary people
    away;  isolate hazard area and deny entry.   Stay upwind; keep out of low
    areas.  Ventilate closed  spaces before entering them.  Wear positive
    pressure breathing apparatus and special protective clothing.  Remove  and
    isolate contaminated clothing at the site (DOT 1984, Guide 55).


    Unusual Fire  and  Explosion Hazards:  When heated to decomposition, it
    emits  very toxic fumes  of chlorine containing  compounds and nitrogen
    oxides  (Sax 1984,  p. 692).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable: Not Found

        Conditions to  Avoid:  Not Found

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition  or Byproducts:  When heated to decomposition,
    it  emits very toxic  fumes of chlorine containing compounds and nitrogen
    oxides  (Sax 1984,  p. 692).

-------
                                     CAS Registry Number:  15271-41-7
                                     Page 3  of 4


               BICYCLO[2.2.l]HEPTANE-2-CARBONITRILE,
    5-CHLORO-6-((((METHYLAMINO)CARBONYL)OXY)IMINO)-,(1S-(l ALPHA,
                  2 BETA, 4 ALPHA, 5 ALPHA, 6E))-
SECTION  IV  -- REACTIVITY DATA (Continued)

    Hazardous Polymerization:  May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION V --  HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:   Not Found
                      Skin:  Yes (Sax  1984, p. 692)
                      Ingestion:   Yes (Sax 1984,  p.  692)

    Health  Hazards (Acute,  Delayed, and Chronic):  High oral and dermal
    toxicity  (Sax  1984, p. 692).   Carbamates are cholinesterase  inhibitors
    (Gosselin 1984, p. 111-86).

    Signs and Symptoms of  Exposure:   Symptoms of carbamate poisoning are
    similar to  those of parathion poisoning and may include nausea, vomiting,
    abdominal cramps, diarrhea,  excessive salivation, headache,  dizziness,
    giddiness,  weakness, muscle  twitching, difficult breathing,  sensation of
    tightness of chest, blurring or dimness of vision, and loss  of muscle
    coordination.  Death may occur from  failure of the respiratory center,
    paralysis of the respiratory muscles, intense bronchoconstriction,  or all
    three (Gosselin 1984, pp. 111-88, 89).

    Medical Conditions Generally Aggravated by Exposure:  Not  Found

    Emergency  and First Aid Procedures:  An insecticidal carbamate (Buchel
    1983, p.  127).  Move victim  to fresh air; call emergency medical care.  If
    not breathing, give artificial respiration.  If breathing is difficult,
    give oxygen.   In case of contact with material, immediately  flush  skin or
    eyes with running water for  at least 15 minutes.   Speed in removing
    material  from  skin is of extreme importance.  Remove and isolate
    contaminated clothing and shoes at the site.  Keep victim quiet and
    maintain  normal body temperature.  Effects may be delayed; keep victim
    under observation (DOT 1984, Guide 55).


SECTION VI  -- USE INFORMATION

    Acaricide used experimentally for residual control of mobile forms  of
    spider  mites,  including several phosphate resistant strains.  It is
    neither ovicidal nor systemic and has not been registered (Farm Chemicals
    Handbook  1984, p. C229).

-------
                                     CAS  Registry Number:  15271-41-7
                                     Page 4 of 4


               BICYCLOf2.2.l]HEPTANE-2-CARBONITRILE/
    5-CHLORO-6-((((METHYLAMINO)CARBONYL)OXY)IMINO)-,(1S-(1 ALPHA,
                  2 BETA,  4 ALPHA, 5 ALPHA,  6E))-
SECTION VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps  to be Taken in Case Material is Released or Spilled)

    A carbamate insecticide  (Buchel 1983,  p.  127).  Do not touch  spilled
    material; stop leak if you can do so without risk.  Use water spray to
    reduce vapors.  Small spills:  absorb  with sand or other  noncombustible
    absorbent material and place into containers for later disposal.  Small
    dry spills:  with clean  shovel place material into clean, dry container
    and cover; move containers from spill  area.  Large spills:  dike far ahead
    of  spill for later disposal (DOT 1984, Guide 55).


COMMENTS

    Sources searched but no  information found:
        Hayes 1982
        Weast 1979
        ACGIH 1983
        NIOSH/OSHA 1978
        NFPA 1984
        Student 1981
        Weiss 1980
        CHRIS 1978
        Clayton and Clayton  1981-82
        Arena 1979
        Encyc Occupat Health and Safety 1983
        Doull 1980
        Hawley 1981

-------
                                            CAS  Registry  Number:   16752-77-5
                                            Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 31, 1985
                                                    Revision:
CHEMICAL IDENTITY  -- METHOMYL

CAS Registry Number:  16752-77-5

Synonyms:  Acetimidic Acid,  Thio-N-((Methylcarbamoyl)oxy)-,  Methyl Ester;
l-(Methylthio)Acetaldehyde 0-Methylcarbamoyloxime;  l-(Methylthio)
Ethylideneamino  Methylcarbamate; 3-Thiabutan-2-one, 0-(Methylcarbamoyl)Oxime;
Acetimidic Acid, N-((Methylcarbamoyl)Oxy)Thio-,  Methyl Ester; Acetimidothioic
Acid, Methyl-, N-(Methylcarbamoyl) Ester;  Du Pont  Insecticide 1179; Du Pont
1179; Ethanimidothioic Acid, N-(((Methylamino)Carbonyl)Oxy)-, Methyl Ester; IN
1179; Insecticide  1,179; Lannate; Mesomile;  Methyl  N-((((Methylamino)Carbonyl)
Oxy)Ethanimido)Thioate; Methyl N-((Methylcarbamoyl)Oxy)Thioacetimidate; Methyl
N-[[(Methylamino)Carbonyl] OxyjEthanimidothioate; Methyl O-(Methylcarbamoyl)
Thiolacetohydroxamate; N-[(Methylcarbamoyl)Oxy]Thioacetimidic Acid Methyl
Ester; N-[[(Methylamino) Carbonyl]0xy]Ethanimidothioic Acid Methyl Ester;
Nudrin; S-Methyl N-(Methylcarbamoyloxy)Thioacetimidate; SD 14999; WL 18236

Chemical Formula:   C5H1QN202S

Molecular  Weight:   162.23


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  TWA 2.5 mg/m3  (skin) (*ACGIH 1983)

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity  information:  LD,   oral (guinea

    pig) 15 mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H20=l):   1.2946 at 75°F, 24°C (*Merck 1983)

    Vapor  Pressure (mmHg):  5 x 10"5 at  77°F,  25°C (*ACGIH 1980)

    Melting Point:   172-174°F, 78-79°C  (*Merck 1983)

-------
                                      CAS Registry Number:  16752-77-5
                                      Page 2 of 4
                             METHOMYL


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Vapor  Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:  5.8 g/100 ml (Farm Chemicals Handbook  1984, p.
    C147)       '

    Appearance and Odor:  White crystalline solid with slight sulfurous
    smell  (*Farm Chemicals  Handbook  1984)


SECTION  III - FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing  Methods:  (Non-Specific  -- Carbamate  Pesticide, Solid)
    Use agent suitable for  type of surrounding fire.   Use  water in flooding
    quantities as  a  fog.  Use alcohol foam, carbon dioxide,  or  dry chemical
    (Student 1981, p. 104).

    Special  Fire Fighting  Procedures:  (Non-Specific --  Carbamate
    Pesticide, Solid)  Wear self-contained breathing apparatus  (Student  1981,
    p.  104).

    Unusual Fire and Explosion Hazards:  When heated to decomposition,  it
    emits  very toxic fumes  of nitrogen oxides and sulfur oxides (Sax 1984, p.
    1874).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                Stable:   Yes (^Worthing 1979)

        Conditions to Avoid:  Do not subject liquid formulations to
        temperatures below  32°F (*Farm Chemicals  Handbook  1984).

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:   When heated  to decomposition,
    it  emits very toxic fumes of nitrogen oxides  and sulfur  oxides (Sax  1984,
    p.  1874).

-------
                                      CAS Registry Number:   16752-77-5
                                      Page 3 of 4
                             METHOMYL
SECTION  IV  --  REACTIVITY DATA (Continued)

    Hazardous Polymerization:  May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:   Yes (*Jones  1977)
                      Skin:  Yes (*Jones 1977)
                      Ingestion:   Yes (*Jones  1977)

    Health Hazards (Acute,  Delayed,  and Chronic):  Methomyl has high oral
    toxicity, moderate inhalation toxicity and  low  skin toxicity (Sax 1984, p.
    1874).   The probable oral lethal dose for humans  is between 7 drops and 1
    teaspoon for a  150 pound adult.   Death is due to  respiratory arrest
    (*Gosselin  1984).

    Signs and Symptoms of  Exposure:  Methomyl is  similar to  carbaryl.
    Methomyl is a reversible cholinesterase inhibitor, and symptoms of
    exposure are related to effects on the nervous  system.  Nausea, vomiting,
    abdominal cramps, sweating, excessive salivation, and pinpoint pupils are
    common symptoms.  Running nose and tightness  of chest may occur with
    inhalation  exposure.  Loss of muscle  coordination, frothing of the mouth,
    and raspy breathing may also occur (*Gosselin 1984).

    Medical  Conditions Generally Aggravated by Exposure:  Not Found

    Emergency  and First Aid  Procedures:   Move the victim to fresh air and
    monitor for respiratory distress.  Be prepared  to administer oxygen.
    Decontaminate the patient ;f there is any possibility of exposure to the
    skin.   Wash the  skin and hair with soap and water at least twice.  Remove
    all contaminated clothing (*Morgan 1982; DOT 1984, Guide 55).


SECTION  VI -- USE INFORMATION

    A nematocide, and an insecticide on vegetables, tobacco, cotton, alfalfa,
    soy beans,  and  corn (*SRI).

-------
                                            CAS Registry Number:  16752-77-5
                                            Page 4 of 4
                             METHOMYL
SECTION  VII -- PRECAUTIONS FOR SAFE  HANDLING  AND  USE
(Steps to  be Taken in Case Material is  Released or Spilled)

    (Non-Specific -- Carbamate Pesticide, Solid)  Keep unnecessary people
    away;  isolate hazard areas and deny entry.  Stay upwind and keep out of
    low areas.  Wear protective clothing, including boots, gloves  and
    goggles.  Do not touch spilled material, or handle broken packages  without
    protective equipment.  Wear positive pressure breathing apparatus,  and do
    not breathe dust, vapors, or the fumes  from burning material (Student
    1981,  p. 104; DOT 1984, Guide 55).

-------
                                     CAS Registry Number:   16919-58-7
                                     Page  1 of 3
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- AMMONIUM CHLOROPLATINATE

CAS Registry Number:   16919-58-7

Synonyms:  Diammonium  Hexachloroplatinate(2-); Platinate(2-),  Hexachloro-,
Diammonium,  (OC-6-11)-;  Platinic  Ammonium Chloride;  Ammonium Platinic Chloride

Chemical Formula:   Cl,H.N0Pt
                     DO/
Molecular  Weight:  443.89


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  TWA 0.002 ug/m3  (as platinum) (*NIOSH 1977)

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:   LD5_ oral (rat)
    0.44 mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not  Found

    Specific Gravity (H  0=1):  3.065 (*Weast 1976)

    Vapor Pressure (mmHg):   Not  Found

    Melting Point:   Decomposes (*Weast 1976)

    Vapor Density (AIR=1):   Not  Found

    Evaporation Rate  (Butyl acetate=l):   Not  Found

    Solubility in Water:   7 g/liter  at 59°F; 12.5 g/liter at 212°F (*Weast
    1976)

    Appearance and Odor:  Yellow  cubic crystals (*Weast 1976); orange-red
    crystals  or yellow powder (*Merck 1976).

-------
                                      CAS Registry Number:   16919-58-7
                                      Page 2 of 3
                     AMMONIUM  CHLOROPLATINATE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  Not Found

    Special  Fire Fighting  Procedures:   Not Found

    Unusual Fire and Explosion Hazards:  When heated to decomposition,
    highly toxic fumes of chlorides, ammonia,  and nitrogen oxides are evolved
    (Sax 1984,  p.  260).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  When heated to decomposition, highly toxic
        chloride fumes are evolved (*Sax 1975).

    Incompatibility (Materials to Avoid):   On contact with acids or acid
    fumes, toxic chloride fumes are evolved (*Sax 1975).

    Hazardous  Decomposition or Byproducts:   Chloride  fumes are evolved when
    ammonium chloroplatinate is heated to  decomposition  or when it is reacted
    with acids  (*Sax 1975).  Ammonia and nitrogen oxide  fumes are evolved on
    decomposition (Sax 1984, p. 260).

    Hazardous  Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found
SECTION  V --  HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:   Yes (Non-Specific  -- Platinum Soluble
                                  Salts)  (NIOSH/OSHA 1978, p. 159)
                      Skin:  Yes (Non-Specific -- Platinum Soluble Salts)
                             (NIOSH/OSHA  1978,  p.  159)
                      Ingestion:   Yes (Non-Specific  -- Platinum Soluble
                                  Salts)  (NIOSH/OSHA 1978, p. 159)

-------
                                      CAS Registry Number:   16919-58-7
                                      Page 3 of 3
                     AMMONIUM CHLOROPLATINATE
SECTION  V -- HEALTH  HAZARD DATA (Continued)

    Health Hazards (Acute,  Delayed,  and Chronic):  Like other platinum
    salts, this  material can cause asthma and dermatitis.  Symptoms begin
    during exposure and grow worse with chronic  exposure  ("Browning 1969).   It
    is toxic by  inhalation or ingestion (Sax 1984,  p. 260).  Toxic
    concentrations for inhalation are 0.9  yg/minute (*NIOSH 1977).

    Signs and Symptoms of Exposure:  First symptoms are pronounced
    irritation of the nose and upper respiratory passages, with sneezing,
    running of eyes, and coughing.   Later,  "asthmatic syndrome," with cough,
    tightness of chest, wheezing, and shortness  of  breath, develops (*Browning
    1969).  Skin allergies may develop from contact with  platinum soluble
    salts  (NIOSH/OSHA 1978, p. 159).

    Medical  Conditions Generally Aggravated by  Exposure:  Persons
    sensitized to platinum or platinum salts (*Encyc  Occupat Health and Safety
    1971).

    Emergency and First Aid  Procedures:   Like  treatment for other platinum
    salts, remove victim to fresh air and give oxygen.  Nasal washing to
    remove salts is recommended (^Browning 1969) .   In case of skin or eye
    contact, irrigate with water immediately. In case material is swallowed,
    give the victim large quantities of water and induce  vomiting (NIOSH/OSHA
    1978,  p. 159).


SECTION  VI --  USE INFORMATION

    This material is used in platinum plating and the manufacture of spongy
    platinum (*Merck 1976).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released  or  Spilled)

    Avoid breathing dust and contact with skin (see Section V above).

-------
                                     CAS Registry Number:   17702-41-9
                                     Page  1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- DECABORANE(14)

CAS Registry Number:   17702-41-9

Synonyms:  Boron Hydride  (B  H ,);  Decaborane; Decaboron

Tetradecahydride

Chemical Formula:  B,rtH,.
                    10  14
Molecular  Weight:  122.22


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   0.05 ppm (0.3 mg/m3)  (NIOSH/OSHA 1978,  p.  76).

    ACGIH TLV:   TWA 0.05 ppm (0.3  mg/m3);  STEL 0.15 ppm (0.9 mg/m3)
    (skin) (ACGIH 1984,  p.  17)

    IDLH:  20 ppm (NIOSH/OSHA 1978, p. 76)

    Other Limits  Recommended:  Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  415°F,  213°C (*Weast 1979)

    Specific Gravity (H20=l):  0.95 at 25°C (*Weast  1979)

    Vapor Pressure (mmHg):  19  at 100°C  (*Sax 1975)

    Melting Point:  211°F,  99.5°C  (*Weast 1979)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl  acetate=l):  Not Found

    Solubility in Water:   Slightly  soluble  in cold water  (*Weast  1979)

    Appearance and Odor:   White  crystals (*Weast 1979) or colorless
    crystalline needles  (*NFPA 1978) with  an intense, bitter,  chocolate-like
    odor (*Browning 1969)

-------
                                       CAS  Registry  Number:   17702-41-9
                                       Page 2 of 4
                          DECABORANE04)
SECTION III -- FIRE  AND EXPLOSION  HAZARD DATA

    Flash Point (Method  Used):   176°F, 80°C (CC) (*NFPA 1978)
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  Small fires:  cover with sand, earth or water-
    spray and keep  it  wet.   Large  fires:  water spray or fog.  Do not scatter
    spilled material with more  water  than needed for fire control.  Move
    container from  fire  area if you can  do so without risk.  Spray cooling
    water on containers  that are exposed to flames until well after fire is
    out.   For massive  fire in cargo area, use unmanned hose holder or monitor
    nozzles; if this is  impossible, withdraw from area and let fire burn (DOT
    1984, Guide 38).

    Special  Fire Fighting Procedures:  Keep unnecessary people away;
    isolate hazard  area  and deny entry.  Stay upwind; keep out of low areas.
    Wear positive pressure breathing  apparatus and full protective clothing
    (DOT 1984,  Guide 38).

    Unusual Fire and  Explosion  Hazards:  Decaborane mixed with  carbon
    tetrachloride is dangerously shock sensitive (*Merck 1976).  It reacts
    slowly with air  but  when mixed with  air or oxygen, it becomes highly
    flammable and may  explode.   It undergoes an explosive reaction with most
    oxidizing agents including  halogenated hydrocarbons'(*Encyc Occupat Health
    and Safety 1971).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (*Merck 1976)

        Conditions to  Avoid: Normally stable, but becomes unstable at
        elevated temperature and pressure (*NFPA 1978).

    Incompatibility  (Materials to Avoid):  Incompatible with ethers;
    halocarbons;  oxygen  at  100°C; dimethyl sulfoxide (Sax 1984, p. 856); most
    oxidizing  agents,  including halogenated hydrocarbons (*Encyc Occupat
    Health and  Safety  1971).  It is corrosive to natural rubber, some
    synthetic  rubbers, some greases,  and some lubricants (Weiss 1980, p. 301).

    Hazardous  Decomposition or Byproducts:  It may give off toxic fumes of
    unburned material  (Weiss 1980, p. 301).  When heated to decomposition, it
    emits toxic fumes  of boron  oxides (Sax 1984, p. 856).

-------
                                      CAS Registry Number:  17702-41-9
                                      Page 3  of 4
                          DECABORANE(14)
SECTION  IV --  REACTIVITY DATA  (continued)

    Hazardous Polymerization:   May Occur:
                               May Not Occur:  Yes  (Weiss 1980, p. 301)

        Conditions to Avoid:   Not  Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (*Sax 1975)
                      Skin:   Yes  (NIOSH/OSHA 1978, p. 77)
                      Ingestion:  Yes (NIOSH/OSHA 1978,  p.  77)

    Health Hazards  (Acute, Delayed,  and  Chronic):   May cause death or
    permanent injury after very  short exposure to small quantities  (*Sax
    1975).  Produces marked irritation of skin and mucous membranes  (*Encyc
    Occupat Health and Safety  1971).  May cause liver injury (*Rumack 1975 to
    Present).

    Signs and Symptoms of Exposure:  Symptoms  include headache and
    lethargy;  severe exposure  causes convulsions and tremors (*Rumack 1975 to
    Present);  dizziness, nausea, vomiting, muscular tremors  and evidence  of
    liver injury (*Merck 1976).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air;  call
    emegency medical care.  If not breathing, give artificial  respiration.   If
    breathing is difficult, give oxygen.   In case of contact with material,
    keep exposed skin areas immersed in water or covered with  wet bandages
    until medical attention is received.   Remove and isolate contaminated
    clothing and shoes at the  site and place in metal container filled wth
    water -- fire hazard if allowed to dry (DOT 1984, Guide  38).


SECTION  VI --  USE INFORMATION

    In rocket propellants; as  catalyst in olefin polymerization (*Merck 1976);
    rubber vulcanizer (*Browning 1969); to coat metals with  corrosion
    resistant boron; in manufacture of plastics (*Thienes 1972);  oxygen
    scavenger;  mothproofing; dye-stripping; reducing and fluxing agent
    (*Clayton and Clayton  1981-82); stabilizer and rayon delustrant  (*Hawley
    1977).

-------
                                      CAS Registry Number:  17702-41-9
                                      Page 4 of 4
                         DECABORANE(14)
SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or Spilled)

    Ventilate area  of spill.  For small quantities, sweep into paper or other
    suitable material, place in appropriate container and burn in safe place
    (such  as fume hood).  Large quantities may be reclaimed.   If  reclamation
    is not practical, dissolve in flammable solvent (such as  alcohol) and
    atomize in suitable combustion chamber equiped with appropriate effluent
    gas cleaning device (*NIOSH/OSHA 1981).  Only persons with adequate
    personal, protective equipment should be allowed in vicinity of
    containers.  Eye and face protection, impervious overalls,  hand, arm, foot
    and leg protection should be worn (*Encyc Occupat Health  and  Safety
    1971).   Do not  touch spilled material; stop leak if you can do so without
    risk.   Use water spray to reduce vapors.   Small spills:   cover with water,
    sand or earth;  shovel into metal container and keep material  under water.
    Large  spills:   dike for later disposal and cover with wet sand or water.
    Clean  up only under supervision of an expert (DOT 1984, Guide 38).

-------
                                          CAS Registry Number:   17702-57-7
                                          Page  1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31, 1985
                                                  Revision:
CHEIMICAL  IDENTITY --  FORMPARANATE

CASJ Registry Number:  17702-57-7

Synonyms:   (NIOSH/RTECS  Synonyms  1983, Volume 1, p. 834):   Carbamic
Acid,  Methyl-, 4-( ((Dimethylamino)Methylene)Amino)-rn-Tolyl Ester; ENT 27,305;
UC-25074; Union Carbide UC-25074

Chemical Formula:  C12H17N3°2

Molecular Weight:  235.32


SECTION I  --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD  oral (rat) 7.2

    mg/kg (*NIOSH/RTECS 1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:   Not Found

-------
                                     CAS Registry Number:   17702-57-7
                                     Page 2 of 3
                          FORMPARANATE


SECTION  III  -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Not Found

    Special Fire Fighting Procedures:  Not Found

    Unusual Fire  and Explosion Hazards:  Not Found


SECTION  IV  -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:   Not Found

    Incompatibility (Materials  to Avoid):   Not Found

    Hazardous Decomposition  or Byproducts:   Not Found

    Hazardous Polymerization:  May Occur:   Not Found
                              May Not  Occur:  Not Found

        Conditions to Avoid:   Not Found


SECTION  V -- HEALTH HAZARD  DATA

    Routes of Entry:   Inhalation:  Not Found
                      Skin:   Not Found
                      Ingestion:  Not Found

    Health  Hazards  (Acute, Delayed,  and  Chronic):  Not Found

    Signs  and Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Not Found

-------
                                    CAS Registry Number:   17702-57-7
                                    Page 3 of 3
                         FORMPARANATE
SECTION VI — USE INFORMATION

    Not Found
SECTION VII —.  PRECAUTIONS  FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    Not Found
COMMENTS

    Sources searched but no information found:
       Buchel 1983
       Clayton and Clayton 1981-82
       Farm Chemicals Handbook 1984
       Hawley 1981
       Hayes 1982
       Merck 1983
       Sax 1984

-------
                                          CAS Registry Number:   19287-45-7
                                          Page  1 of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  DIBORANE

CAS Registry Number:  19287-45-7

Synonyms:  Boroethane; Boron Hydride; Diborane;  Diboron Hexahydride

Chemical Formula:   B.H,
                    Z D

Molecular Weight:  27.69


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  0.1 mg/m3  (NIOSH/OSHA 1978, p. 78)

    ACGIH TLV:  TWA 0.1 mg/m3  (*ACGIH 1984)

    IDLH:  40 ppm (NIOSH/OSHA 1978,  p.  78)

    Other Limits Recommended:  Not  Found  .


SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   -135°F, -92.5°C (*Merck 1983)

    Specific Gravity (H20=l):   0.210  at  15°C (*Merck 1983)

    Vapor Pressure (mmHg)*:   224 at -112°C  (*Sax  1979)

    Melting Point:   -265°F, -165°C  (*Merck 1983)

    Vapor Density (AIR=1):   1.0 (NFPA 1984, p. 325M-32)

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility in Water:   Not  Found

    Appearance and Odor:  Colorless gas with  a  repulsive,  sickly-sweet odor
    (*Merck 1983)

-------
                                      CAS Registry Number:   19287-45-7
                                      Page 2 of 4
                              DIBORANE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  -130°F, -90°C (*Hawley 1978)
    Flammable  Limits:
        LEL:   0.8%  (*NFPA  1978)
        UEL:   88%  (*NFPA 1978)

    Extinguishing Methods:   Inert gas substances such as liquid nitrogen
    are recommended (*Encyc Occupat Health and Safety 1983).

    Special  Fire Fighting Procedures:  Firefighting should be done from an
    explosion-resistant  location.  Use water from unmanned monitors or hose
    holders to keep fire-exposed containers cool.  If it is necessary to stop
    flow of gas,  use water  spray to protect personnel effecting shut-off.
    Personnel  should be  evacuated  immediately.  Self-contained breathing
    apparatus  and full protective  clothing should be worn (*NFPA 1978).
    Isolate for 1/2 mile  in all directions if tank car or truck is involved in
    fire (DOT  1984,  Guide 18).

    Unusual Fire and Explosion Hazards:   It will  ignite spontaneously in
    moist  air  at  room temperature.  Also, it reacts violently with vaporizing
    liquid-type extinguishing agents  (NFPA 1984, p. 49-36).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Yes (NFPA  1984, p. 49-36).
                 Stable:

        Conditions  to Avoid:  Avoid moist air, electrical sparks, open
        flames or any other heat source (NFPA 1984, p. 49-36).

    Incompatibility  (Materials to Avoid):  Incompatible with air,
    halogenated compounds,  aluminum,  lithium, active metals,  oxidized surfaces
    (NIOSH/OSHA 1978, p.  78),  chlorine, fuming nitric acid, nitrogen
    trifluoride,  oxygen,  and phosphorus trifluoride (*NFPA 1978).

    Hazardous  Decomposition or Byproducts:  It hydrolyzes in water to
    hydrogen and  boric acid (*Merck 1983).

    Hazardous  Polymerization:  May Occur:   Yes  (*Thienes  1972)
                               May Not Occur:

        Conditions  to Avoid:  Not  Found

-------
                                      CAS Registry Number:  19287-45-7
                                      Page 3 of 4
                              DIBORANE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (*Encyc Occupat Health and
                                  Safety 1983)
                       Skin:   Yes  (*Encyc Occupat Health and Safety 1983)
                       Ingestion:  Yes (*Encyc Occupat Health and
                                  Safety 1983)

    Health Hazards  (Acute, Delayed,  and Chronic):   Boranes  are highly toxic
    by inhalation,  skin absorption or ingestion.  They may produce acute or
    chronic poisoning ("Encyc  Occupat Health and Safety 1983).   Diborane is  an
    irritant to the lungs  and  kidneys (Doull 1980, p. 441).   The primary
    effect of diborane poisoning is  lung congestion caused by local tissue
    irritation produced by the exothermic reaction of hydrolysis (Clayton and
    Clayton 1981-82, p.  2991).

    Signs and  Symptoms of Exposure:   Irritation of  the  lungs, congestion of
    the lungs,  and  possible nervous  system intoxication have been reported
    (ACGIH 1980,  p.  122).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air;  call
    emergency medical care.  If not  breathing, give artificial respiration.
    If breathing is difficult, give  oxygen.  Remove and isolate contaminated
    clothing and shoes at  the  site.  In case of contact with material,
    immediately flush skin or  eyes with running water for at least 15 minutes
    (DOT 1984,  Guide 18).


SECTION  VI -- USE INFORMATION

    It is  an intermediate  for  trialkyl and triaryl boranes (polymerization
    catalyst);  copolymerization catalyst for styrene and butadiene;
    polymerization  catalyst for olefins and epoxides.  It is also used in the
    production of hard boron coatings on metals and ceramics; rocket
    propellants;  as a rubber vulcanizer; reducing agent; flame-speed
    accelerator and a doping gas (*SRI, *Merck 1983).

-------
                                           CAS Registry Number:  19287-45-7
                                           Page 4  of 4
                             DIBORANE
SECTION VII -- PRECAUTIONS FOR SAFE  HANDLING AND  USE
(Steps to be Taken in Case Material is  Released or Spilled)

    Keep unnecessary people away;  isolate hazard area and deny entry.  Stay
    upwind.  Wear positive pressure breathing apparatus and  full  protective
    clothing.  Shut off ignition sources; no flares, smoking or flames in
    hazard  area.  Stop leak if possible.  Use water spray to reduce  vapors.
    Evacuate area endangered by gas.  Isolate for 1/2 mile in all directions
    if tank car or truck is involved in fire (DOT 1984, Guide 18).

-------
                                           CAS Registry Number:   19624-22-7
                                           Page 1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- PENTABORANE

CAS Registry Number:   19624-22-7

Synonyms:  Pentaborane  (9); Pentaboron Nonahydride; (9)-Pentaboron
Nonahydride

Chemical Formula:   B H

Molecular  Weight:  63.17


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  TWA 0.005 ppm,  0.01 mg/m3 (NIOSH/OSHA  1978, p. 148)

    ACGIH TLV:  TWA 0.005 ppm, 0.01  mg/m3; STEL 0.015 ppm,  0.03  mg/m3
    (*ACGIH  1980)

    IDLH:  3 ppm (NIOSH/OSHA  1978, p.   148)

    Other Limits Recommended:  Short-term inhalation  limits:  25 ppm for 5
    minutes,  8 ppm for 15 minutes, 4 ppm for 30 minutes;  2 ppm for 60 minutes
    (Weiss 1980, p. 731).


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   140°F, 60°C (*Merck 1976)

    Specific Gravity (H20=l):  0.61 at  0°C/4°C  (Merck 1983, p. 1020)

    Vapor Pressure (mraHg):   66  at 0°C  (Merck 1983,  p.  1020)

    Melting Point:   -51.9°F, -46.6°C (Merck 1983, p. 1020)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:  Colorless  liquid with a strong, pungent, foul,
    sour milkish odor (*CHRIS  1978).

-------
                                      CAS Registry  Number:   19624-22-7
                                      Page 2 of 4
                            PENTABORANE
SECTION  III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash  Point (Method Used):  86°F, 30°C (CC) (Hawley 1981,  p.  782)
    Flammable Limits:
        LEL:   0.42% (NIOSH/OSHA 1978, p. 148)
        UEL:   98%  (Weiss 1980, p. 731)

    Extinguishing Methods:   If material is on fire or involved in fire,  do
    not extinguish  unless flow can be stopped.  Do not use water.  Extinguish
    small  fires with dry chemical or  carbon dioxide (Student 1981, p.  394).
    For large fires withdraw  and  let  burn  (DOT 1984, Guide 75).

    Special  Fire Fighting Procedures:   Move container from fire area if you
    can do it without risk.   Cool containers  that are exposed to flames with
    water  from the  side until well after fire is out.  For massive fire in
    cargo  area, use unmanned  hose holder or monitor nozzles; if this is
    impossible, withdraw from area and  let fire burn.  Wear positive pressure
    breathing apparatus and full protective clothing (DOT 1984, Guide 75).

    Evacuation:  if fire becomes uncontrollable or container is exposed to
    direct flame -- evacuate  for  a radius  of  1,500 feet.  If material is
    leaking (not on fire),  downwind evacuation must be considered (Student
    1981,  p. 394).

    Unusual  Fire and Explosion Hazards:   Ignites  spontaneously  in  air
    (Weiss 1980, p. 731).   Reacts violently with halogenated extinguishing
    agents (*NFPA 1978).  Boron hydrides present considerable fire and
    explosion hazard.  They undergo explosive reaction with most oxidizing
    agents,  including halogenated hydrocarbons (*Encyc Occupat Health and
    Safety 1971).   Fires tend to  reignite  (Weiss 1980, p. 731).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:   Yes (Merck 1983,  p.  1020)
                 Stable:

        Conditions to Avoid:   Direct sunlight  and  sources of ignition
        (*Encyc  Occupat Health and Safety 1983); decomposes very slowly at
        150°C  (Merck 1983,  p.  1020).

    Incompatibility (Materials  to Avoid):  Dimethyl sulfoxide (Sax 1984, p.
    2124), water,  most oxidizing agents  (including halogenated hydrocarbons)
    (*Encyc Occupat Health and Safety 1971  and see Section III).

    Hazardous Decomposition  or Byproducts:  On decomposition, it emits
    toxic fumes  and can react  vigorously with oxidizing materials (Sax 1984,
    p.  2124).

-------
                                      CAS Registry Number:   19624-22-7
                                      Page 3 of 4
                           PENTABORANE
SECTION IV -- REACTIVITY DATA  (Continued)

    Hazardous  Polymerization:   May Occur:
                               May Not Occur:  Yes (Weiss 1980,  p.  731)

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Sax 1984,  p.  2124)
                      Skin:  Not Found
                      Ingestion:   No (Weiss  1980, p. 731)

    Health Hazards (Acute, Delayed,  and  Chronic):  May cause death or
    permanent injury  after very short exposure to  small quantities  (Sax 1984,
    p.  2124).

    Signs and Symptoms of Exposure:  Death can occur by central  nervous
    system poisoning.  Inhalation of low concentrations causes behavioral
    changes,  loss  of  recent memory, poor judgment, nausea, vomiting,
    drowsiness,  and difficulty in focusing.  Upon  inhalation of higher
    concentrations, headache, dizziness,  nervous excitation, muscular pain,
  .  uncoordination, cramps, tremors, convulsions,  and coma may occur  (*Grant
    1974;  *Thienes 1972; *Encyc Occupat Health and Safety 1983; *Casarett
    1975;  *ACGIH 1980).

    Medical Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency and First Aid  Procedures:  Move victim to fresh air; call
    emergency medical care.  If not breathing,  give  artificial respiration.
    If  breathing is difficult, give oxygen.  In case of contact with material,
    immediately  flush skin or eyes with running water for at least  15
    minutes.   Remove  and isolate contaminated clothing and shoes at the site.
    Keep victim  quiet and maintain normal body temperature (DOT 1984, Guide
    75).
SECTION  VI  --  USE INFORMATION

    Fuel for  air-breathing engines; propellant (*Hawley  1977).

-------
                                      CAS Registry Number:   19624-22-7
                                      Page 4 of 4
                           PENTABORANE
SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken in Case Material is Released or  Spilled)

    Do not touch spilled material, stop leak if you can do it without risk.
    For spills dike for later disposal and do not apply water unless directed
    to do  so.  Clean up only under supervision of an expert.  Keep unnecessary
    people away; isolate hazard area and deny entry.   Stay upwind; keep out of
    low areas.  Ventilate closed spaces before entering them.  Wear positive
    pressure breathing apparatus and full protective clothing (DOT 1984, Guide
    75).   Avoid breathing vapors, and keep upwind.   Avoid bodily contact with
    the material.  Do not handle broken packages without protective
    equipment.  Wash away any material which may have contacted the body with
    copious amounts of water or soap and water (Student 1981, p. 394).

-------
                                           CAS Registry Number:  20816-12-0
                                           Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- OSMIUM TETROXIDE

CAS Registry  Number:  20816-12-0

Synonyms:  Ostnic Acid Anhydride;  Osmium Oxide; Osmium Oxide  (OsO,),

(T-4)-;  Osmium Tetraoxide;  Perosmic Acid Anhydride;  Perosmic Oxide

Chemical Formula:   OsO,

Molecular  Weight:  254.20


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  TWA 0.002  mg/m3 (NIOSH/OSHA 1978, p.  146)

    ACGIH TLV:  TWA 0.0002 ppm,  0.002 mg/m3; STEL 0.0006  ppm, 0.006
    mg/m3  (ACGIH 1984, p.  28)

    IDLH:  1 mg/m3  (NIOSH/OSHA 1978, p.  146)

    Other Limits Recommended:  Not Found


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   266°F,  130°C;  begins to  sublime and distill well below
    boiling point (''-Merck 1976)

    Specific Gravity (H  0=1):  4.906 at 22°C (Weast  1984, p. B-104)

    Vapor  Pressure (mmHg):  11 at 27°C (*Merck 1976)

    Melting Point:   105.1°F, 40.6°C (*Merck  1976)

    Vapor  Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility  in Water:   5.70  g in 100 ml at 10°C; 6.23 g in 100 ml at
    25°C (*Weast 1979)

-------
                                      CAS  Registry  Number:  20816-12-0
                                      Page 2 of 4
                         OSMIUM TETROXIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Appearance and Odor:  Pale yellow monoclinic crystals with an acrid,
    chlorine-like odor ('"'Merck 1976)
SECTION  III  --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):   Not  Found
    Flammable Limits:  Not Combustible (NIOSH/OSHA 1978, p. 146)
        LEL:  Not Found
        UEL:  Not Found

    Extinguishing Methods:   Small fires:  dry chemical, carbon dioxide,
    water  spray,  or foam.  Large fires:  water  spray, fog, or foam (DOT 1984,
    Guide  55).

    Special Fire Fighting Procedures:   Move  container from fire area if you
    can do it without risk.   Fight  fire from maximum distance.   Dike fire
    control water for later disposal;  do not scatter the material (DOT 1984,
    Guide  55).

    Unusual Fire and Explosion  Hazards:  Contact with  easily oxidized
    organic materials may cause fires  and  explosions (*NIOSH/OSHA 1981).  When
    heated to decomposition, it emits  toxic  fumes of osmium (Sax 1984,  p.
    2097).
SECTION  IV  --  REACTIVITY  DATA

    Stability:  Unstable:  Not Found
                Stable:  Not  Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials  to Avoid):   Incompatible with hydrochloric
    acid and  easily oxidized organic materials  (*NIOSH/OSHA 1981).

    Hazardous Decomposition or Byproducts:  When heated to decomposition,
    it emits  toxic fumes of osmium (Sax 1984, p. 2097).

    Hazardous Polymerization:  May Occur:  Kot Found
                               May Not Occur: Not  Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  20816-12-0
                                      Page 3 of 4
                          OSMIUM TETROXIDE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (Sax 1984, p. 2097)
                       Skin:   Not Found
                       Ingestion:  Yes  (Sax 1984, p. 2097)

    Health Hazards  (Acute, Delayed,  and Chronic):   Acute effects  include
    bronchitis and bronchopneumonia  (Doull 1980, p. 268).  Death may occur
    from bronchopneumonia  (^Browning 1969).  Permanent damage to cornea and
    blindness may occur (*Encyc  Occupat Health and Safety 1971).  Irritates
    the nose, throat,  and  respiratory tract ("Grant 1974).

    Signs and Symptoms of Exposure:   Tearing  and  halo  vision  occur if eyes
    are exposed.   If inhaled,  headaches, coughing, sore throat,  and redness of
    the eyes  have been reported  followed by bronchitis and bronchopneumonia
    and death (*Patty 1963; *ACGIH 1984; *Grant  1974; Doull 1980,  p. 453).
    Skin contact  may result in green or black discoloration ("Encyc Occupat
    Health and Safety 1971).

    Medical Conditions  Generally Aggravated by  Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air; call
    emergency medical care.   If  not  breathing, give artificial respiration.
    If breathing  is difficult, give  oxygen.  In case of contact with material,
    immediately flush skin or  eyes with running water for at least 15
    minutes.   Speed in removing  material from skin is of extreme importance.
    Remove and isolate contaminated  clothing and shoes at the site.  Keep
    victim quiet  and maintain  normal body temperature.  Effects may be
    delayed;  keep victim under observation (DOT  1984, Guide 55).


SECTION  VI  -- USE INFORMATION

    Microscopic staining;  photography;  oxidation catalyst in organic synthesis
    (Hawley 1981, p. 764).- Indicator for unsaturated fats in animal tissues,
    may be used as micronutrient in  soil for optimum microbial fixation of
    nitrogen  (*SRI; *Peer  Review Committee).

-------
                                      CAS Registry Number:   20816-12-0
                                      Page 4 of 4
                         OSMIUM TETROXIDE
SECTION  VII -.- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or  Spilled)

    Keep unnecessary people away; isolate hazard area and deny entry.  Stay
    upwind;  keep out of low areas.  Ventilate closed  spaces before entering
    them.  Wear positive pressure breathing apparatus and special protective
    clothing.  Remove and isolate contaminated clothing at the site.  Do not,
    touch  spilled materials; stop leak if you can do  it without risk.  Use
    water  spray to  reduce vapors.  Small spills:  take up with sand or other
    noncombustible  absorbent material and place into  containers for later
    disposal.  Small dry spills:  with clean shovel place material into clean,
    dry container and cover; move containers from spill area.  Large spills:
    dike far ahead  of spill,for later disposal (DOT 1984, Guide 55).

-------
                                           CAS Registry Number:   20830-75-5
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October 31. 1985
                                                   Revision:
CHEMICAL IDENTITY -- DIGOXIN

CAS Registry Number:  20830-75-5

Synonyms:  Acygoxin; Card-20(22)-enolide,  3-((0-2,6-dideoxy-beta-D-ribo-
hexopyranosyl-(hexopyranosyl-(l-4)-2,6-dideoxy-beta-D-ribo-hexopyranosyl)oxy)'
12,14-dihydroxy-,; Chloroformic digitalin; Lanacordin;  Lanatilin; Lanicor;
Lanoxin;  Rougoxin; Saroxin; Vanoxin; Cordioxil; Davoxin;  Digacin; Digitalis
Glycoside;  Dilanacin; Dixina;  Homolle's Digitalin

Chemical Formula:  C.-H.-.O,.
                    41  64  14

Molecular Weight:  780.92


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits  Recommended:  Toxicity information:  LD.   oral (dog)

    0.3 mg/kg (*NIOSH/RTECS 1985)


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H_0=l):  Not Found

    Vapor Pressure  (mmHg):  Not Found

    Melting Point:  Decomposition range 446-509°F,  230-265°C (Merck 1983,
    p.  460)

    Vapor Density (AIR=1): Not Found

-------
                                           CAS Registry Number:  20830-75-5
                                           Page 2 of 3
                             DIGOXIN
SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Evaporation  Rate  (Butyl acetate=l):  Not Found

    Solubility in Water:  Insoluble  ("Sunshine 1969)

    Appearance and Odor:   Clear to white crystals  or white crystalline
    powder.  Odorless (*0sol 1975).


SECTION  III --  FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:   (Non-Specific -- Medicines, Solid, Poison B)
    Extinguish fire using agent suitable for type of surrounding fire;
    material itse.H doea not Lain iMJ^burns with difficulty.  Use water in
    flooding quantities as  fog.  Use alcohol foam, carbon dioxide, or dry
    chemical (Student 1981,  p. 322).

    Special Fire  Fighting Procedures:  Not Found

    Unusual Fire and Explosion Hazards:  Not Found


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable: Not Found

        Conditions to Avoid:  Avoid light (*AHFS 1984).

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:  May Occur:   Not Found
                              May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  20830-75-5
                                            Page 3 of 3
                              DIGOXIN
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Not Found
                       Skin:   Not  Found
                       Ingestion:  Yes (-'-Gosselin 1976)

    Health Hazards  (Acute, Delayed,  and Chronic):   Material is a digitalis
    glycoside.   Ingestion  can  cause death.  Material is  considered  super
    toxic; probable  human  oral  lethal dose is less than  5 mg/kg,  a  taste  (less
    than 7 drops)  for  a 70 kg  (150 Ib.) person (*Gosselin 1976).

    Signs and Symptoms of Exposure:   Data  here  refer specifically to
    digitalis.   Nausea and vomiting, headache, fatigue,  weakness, drowsiness,
    and abdominal  discomfort are symptomatic of toxicity.  Visual disturbances
    (including blurring, halos, and aberrations of color), emotional  disorders
    (including confusion,  disorientation, aphasia, delirium,  and
    hallucinations)  and convulsions (*Gosselin 1976).

    Medical Conditions  Generally Aggravated  by Exposure:  Persons at  risk
    include those  taking drugs  for thyroid and renal diseases  (*0sol  1975,
    *AHFS  1984).   Quinidine and diuretics taken concurrently with digoxin  can
    be hazardous (Gilman 1985,  p.  743).  It should be used with extreme care
    during pregnancy and in nursing mothers (*AHFS 1984).

    Emergency and  First Aid  Procedures:  Not Found


SECTION  VI  --  USE INFORMATION

    Material  is  a  cardiotonic  drug (*Goodman 1975).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be  Taken in  Case Material is Released or Spilled)

    (Non-Specific  -- Medicines, Solid, Poison B)  Avoid  breathing dusts, and
    fumes  from burning materials.  Keep upwind.  Wear self-contained  breathing
    apparatus.   Avoid  bodily contact with the material.   Wear  full  protective
    clothing.  Wash  away any material which may have contacted the  body with
    copious amounts  of water or soap and water (Student  1981,  p.  322).

-------
                                           CAS Registry Number:  20859-73-8
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- ALUMINUM PHOSPHIDE

CAS Registry Number:  20859-73-8

Synonyms:  AIP;  Al-Phos; Aluminum Phosphide (AP);  Aluminum Monophosphide;
Celphos;  Delicia; Delicia Gastoxin; Detia; Detia Gas EX-B; Detia-EX-B;
Phostoxin;  Phostoxin-A; Quickphos

Chemical  Formula:  AIP

Molecular Weight:  57.95


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not  Found

    IDLH:  Not Found

    Other Limits  Recommended:  Toxicity information:  'LDc0 oral (human)
    20 mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H20=l):  2.85 at 15°C/4°C  (*Merck 1976)

    Vapor Pressure (mmHg):   Not Found

    Melting Point:  Does not melt or decompose at temperatures up to  1000°C
    (*Merck 1976)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl acetate=l):   Not Found

    Solubility in Water:  Not Found (also see Section  IV)

-------
                                      CAS  Registry  Number:  20859-73-8
                                      Page 2 of 3
                       ALUMINUM PHOSPHIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Appearance  and Odor:  Aluminum phosphide exists as dark gray or dark
    yellow crystals  (-Merck 1976)
SECTION  III  --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):   Not  Found
    Flammable Limits:
        LEL:  Not Found
        UEL:  Not Found

    Extinguishing Methods:   Do not  use water or foam.  Small fires  can be
    extinguished with dry chemical,  soda ash, or lime.  Large fires  --
    withdraw  from area and let fire  burn.   Move container from fire  only  if
    you can do it without risk (DOT  1984,  Guide 41).

    Special Fire  Fighting  Procedures:  Wear self-contained breathing
    apparatus when fighting fires involving this material.  If contact with
    the material is anticipated, wear  full protective clothing (Student 1981,
    P-  21).

    Unusual Fire and Explosion Hazards:   Releases  toxic  fumes on exposure
    to  moist  air,  water, or acids (*Merck  1976, *Peer Review Committee;
    '•Bretherick  1975).
SECTION  IV  — REACTIVITY  DATA

    Stability:  Unstable:
                Stable:  Stable when dry  (^Worthing 1979)

        Conditions to Avoid:  Moist air (*Merck 1976)

    Incompatibility (Materials  to Avoid):   Water  (*Peer Review Committee),
    dilute mineral acids, dilute or concentrated hydrochloric acid
    (*Bretherick 1979).

    Hazardous Decomposition or Byproducts:  Phosphine gas (*Peer Review
    Committee; *Bretherick 1979).

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  20859-73-8
                                      Page 3 of 3
                        ALUMINUM PHOSPHIDE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (Sax 1984, p. 178)
                       Skin:   Not Found
                       Ingestion:  Yes  (Gosselin 1984,  p. 11-120)

    Health Hazards  (Acute, Delayed,  and Chronic):   Acute toxicity  occurs
    primarily by the inhalation  route when aluminum phosphide decomposes into
    the toxic gas,  phosphine  (*Rumack 1975 to Present).  The human median
    lethal dose for aluminum  phosphide has been reported to be 20 mg/kg
    (*NIOSH/RTECS 1985).   Rated  as super toxic:  probable oral lethal dose is
    less than 5 mg/kg or  less than 7 drops for a 70 kg (150 Ib.) person
    (Gosselin  1984, pp.  11-119-120).

    Signs and  Symptoms of Exposure:   Symptoms of  phosphine gas poisoning
    include restlessness,  headache, dizziness, fatigue, nausea, vomiting,
    coma,  convulsions (*Rumack 1975 to Present); lowered blood pressure,
    pulmonary edema, respiratory failure, and disorders of the kidney, liver^
    heart, and brain may  be observed (Hayes 1982, pp. 133-135).

    Medical  Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First  Aid  Procedures:  Move victim to fresh air and call
    emergency medical care.   If  not breathing, give artificial respiration.
    If breathing is difficult, give oxygen.  In case of contact with material,
    immediately flush skin and/or eyes with running water for at least 15
    minutes (DOT 1984,  Guide  41).


SECTION  VI  -- USE INFORMATION

    Insecticidal fumigant  for grain, peanuts, processed food, animal feed,
    leaf tobacco, cottonseed,  rnd as space fumigant for flour mills,
    warehouses, and railcars  (Farm Chemicals Handbook 1984, p.  C12); used in
    semiconductor research (*Merck 1976).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    Shut off ignition;  no  flares, smoking, or flames in hazard area.  Do not
    touch spilled material.   Do  not get water on spilled material or inside
    container.   Dike spill for later disposal.  Shovel small spill into clean,
    dry container,  and cover.  Move containers from spill area.  Avoid
    breathing dusts.  Wear appropriate protective clothing and use appropriate
    respiratory protection (Student 1981, p. 21).  Cover large powder spill
    with plastic sheet  or  tarp to minimize spreading.  Clean-up only under
    supervision of an expert  (DOT 1984, Guide 41).

-------
                                     CAS Registry Number:   21548-32-3
                                     Page 1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- FOSTHIETAN

CAS Registry Number:  21548-32-3

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 2,  page 510)
Imidocarbonic Acid, Phosphonodithio-, Cyclic Methylene  P,P-Diethyl Ester;  AC
64475;  Acconem; CL 64475;  (Diethoxyphosphinylimino)-l,3-Dithietane; Geofos;
Nem-a-tak;  Phosphoramidic  Acid,  1,3 Dithietan-2-ylidene-, Diethyl Ester;
l,3-Dithietan-2-ylidenephosphoramidic Acid Diethyl Ester; Phosphonodithioimi-
docarbonic Acid Cyclic Methylene P,P-Diethylester

(Merck 1983 Synonyms, p. 607)   2-(Diethoxyphosphinylimino)-l,3-Dithietane

Chemical  Formula:   C,H,0NO,PS0
                    o  I/   J  /

Molecular Weight:  241.28


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD5Q oral (rat) 4.7
    mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H20=l):  1.3 at 25°C (Merck  1983, p. 607)

    Vapor Pressure (tnmHg):  6.5 x 10"6 at 25°C (Merck  1983, p. 607)

    Melting Point:   Not  Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):   Not Found

-------
                                      CAS Registry Number:  21548-32-3
                                      Page 2  of 4
                            FOSTHIETAN


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility in  Water:   50  g/kg  at  25°C  (Merck 1983, p. 607)

    Appearance and Odor:   Pale  yellow liquid, mercaptan-like odor (Merck
    1983,  p.  607)


SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  This compound is a liquid organophosphorus
    insecticide (Buchel 1983, p.  86)  This material may burn, but does not
    ignite readily.   For  small  fires, use dry chemical, carbon dioxide,  water
    spray, or foam.   For  large  fires, use water spray, fog, or foam (DOT 1984,
    Guide  55).

    Special Fire  Fighting  Procedures:  This compound is a liquid
    organophosphorus  insecticide  (Buchel  1983, p.  86)  Stay upwind; keep out
    of low areas. Move containers from fire area if you can do so without
    risk.   Fight  fire from maximum distance.  Dike fire control water  for
    later  disposal; do not scatter the material.  Wear "positive pressure
    breathing apparatus and  special protective clothing (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:  When heated  to decomposition, it
    emits  very toxic  fumes of nitrogen oxides, phosphorus oxides and sulfur
    oxides (Sax 1984, p.  980).  This compound is a liquid organophosphorus
    insecticide (Buchel 1983, p.  86)  Container may explode in heat of fire
    (DOT 1984,  Guide  55).


SECTION  IV  -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid: Not Found

    Incompatibility  (Materials to  Avoid):  Not Found

    Hazardous  Decomposition or Byproducts:  When heated to decomposition,
    it emits  very toxic fumes of  nitrogen oxides,  phosphorus oxides and sulfur
    oxides (Sax 1984, p.  980).

-------
                                      CAS Registry Number:   21548-32-3
                                      Page 3 of 4
                           FOSTHIETAN
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Non-Specific --  Organic Phosphorus
                                  Insecticides)  (Hayes  1982, p. 301)
                      Skin:  Yes  (Sax 1984, p. 980)
                      Ingestion:   Yes (Sax 1984, p.  980)

    Health Hazards  (Acute, Delayed,  and  Chronic):  This compound is a
    liquid organophosphorus insecticide (Buchel 1983, p.  86)  Organic
    phosphorus insecticides are absorbed by the skin, as  well as by the
    respiratory and  gastrointestinal tracts (Hayes  1982,  p. 301).

    Signs and  Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated  by Exposure:  Not Found

    Emergency and First Aid  Procedures:  This compound is a liquid
    organophosphorus insecticide  (Buchel 1983,  p.  86) Move victim to fresh
    air;  call emergency  medical care.  If not breathing,  give artificial
    respiration.   If breathing is difficult,  give  oxygen.  In case of contact
    with material, immediately flush skin or eyes  with running water for at
    least 15  minutes.  Speed  in removing material  from skin is of extreme
    importance.   Remove  and isolate contaminated clothing and shoes at the
    site.   Keep victim quiet  and maintain normal body temperature.  Effects
    may be delayed;  keep victim under observation (DOT 1984, Guide 55).


SECTION  VI  -- USE  INFORMATION

    This material is used  as  a nematocide and insecticide (Merck 1983, p. 607)
    Not registered as a  pesticide in the U.S. (USEPA/Pesticide Index 1985).

-------
                                      CAS Registry Number:  21548-32-3
                                      Page 4 of 4
                           FOSTHIETAN
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken in  Case Material is Released or Spilled)

    This compound is a liquid organophosphorus insecticide  (Buchel  1983, p.
    86)  Stay upwind;  keep out of low areas.  Ventilate  closed  spaces before
    entering them.  Wear positive pressure breathing apparatus  and  special
    protective clothing.  Do not touch spilled material;  stop leak  if you can
    do so without risk.  Use water spray to reduce vapors.  Small spills:
    absorb with sand or other non-combustible absorbent  material and place
    into containers for later disposal.  Large spills:   dike far ahead of
    spill for later disposal (DOT 1984, Guide 55).
COMMENTS:

    Sources searched but no information found:
        ACGIH 1983
        NIOSH/OSHA  1978
        Hawley 1981
        Weast 1979
        NFPA 1984
        Student 1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton and Clayton 1981-82
        Arena 1979
        Gosselin 1984
        Hayes 1982
        Physicians' Desk Reference 1985
        Gilman 1985

-------
                                     CAS Registry Number:  21564-17-0
                                     Page 1 of 4
                       EPA CHEMICAL  PROFILE
                                                  INTERIM
                                                  Date: October 31,  1985
                                                  Revision:
CHEMICAL  IDENTITY -- THIOCYANIC ACID,
2-(BENZOTHIAZOLYLTHIO)METHYL ESTER

CAS Registry Number:  21564-17-0

Synonyms:   (NIOSH/RTECS  1983 Synonyms, Volume 3,  p.  742)   (2-Benzo-
thiazolylthio)Methyl Thiocyanate; Busan  15; Busan 30; Busan 72; Busan 30-1;
Busan 30A; Busan 72A; Ichiban; KVK 733059; TCMTB;
2-(Thiocyanomethylthio)Benzothiazole

(Farm Chemicals Handbook 1984 Synonyms, p.  C38)   Protector 3L

Chemical  Formula:   C_H,N0S0
                    y o z j

Molecular Weight:  238.35


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity  information:  ^Dcn oral (rat)
    1590  mg/kg; LD   dermal  (mammal) 1 mg/kg (*NIOSH/RTECS 1985)


SECTION II  --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity (H 0=1):  Not  Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:   Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl  acetate=l):   Not Found

    Solubility in Water:  Not Found

-------
                                     CAS Registry Number:   21564-17-0
                                     Page 2 of 4
                         THIOCYANIC ACID,
                2-(BENZOTHIAZOLYLTHIO)METHYL ESTER
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Appearance and Odor:   Not  Found


SECTION  III  -- FIRE  AND  EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing  Methods:  This compound is a fungicide  (Buchel 1983,  p.
    283).   Small fires:  dry chemical,  carbon dioxide,  water spray, or foam.
    Large  fires:  water spray, fog, or  foam.  Move container from fire area if
    you can do so without risk.  Fight  fire from maximum distance.  Dike fire
    control water  for later disposal; do not scatter the material (DOT 1984,
    Guide  55).

    Special Fire Fighting Procedures:   This compound is a  fungicide (Buchel
    1983,  p.  283).  Keep unnecessary people away;  isolate  hazard area and deny
    entry.  Stay upwind; keep  out of low areas.  Ventilate closed spaces
    before entering them.  Wear  positive pressure breathing apparatus and
    special protective clothing.  Remove and isolate contaminated clothing at
    the site  (DOT  1984, Guide  55).

    Unusual Fire  and  Explosion  Hazards:   Not  Found


SECTION  IV  -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable: Not Found

        Conditions to  Avoid:  Not Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or  Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to  Avoid:  Not Found

-------
                                      CAS Registry Number:  21564-17-0
                                      Page 3 of 4
                         THIOCYANIC ACID,
                 2-(BENZOTHIAZOLYLTHIO)METHYL ESTER
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Not Found

    Health Hazards  (Acute, Delayed,  and  Chronic):   It is classified as
    moderately toxic.  Probable oral lethal dose in humans  is  estimated to be
    0.5 tcf 5  g/kg  (1 ounce to 1 pint in a 150 Ib.  person)  (Gosselin  1984, p.
    11-322).

    Signs and Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  This compound is  a  fungicide
    (Buchel 1983,  p. 283).  Move victim to fresh air;  call  emergency medical
    care.   If not  breathing, give artificial respiration.   If  breathing is
    difficult,  give  oxygen.  In case of contact with material, immediately
    flush skin or  eyes with running water for at least 15 minutes.   Speed in
    removing  material from skin is of extreme importance.   Remove  and  isolate
    contaminated clothing and shoes at the site.  Keep victim  quiet  and
    maintain  normal  body temperature.  Effects may be delayed; keep  victim
    under observation (DOT 1984, Guide 55).


SECTION  VI  -- USE INFORMATION

    Fungicide:  registered as a seed treatment for barley,  cotton, corn, oats,
    rice and  wheat.  Dust formulations based on this material  are  also
    available for  seed treatments of cereals, corn, cotton,  legumes, rice,
    sorghum,  and sugar beets (Farm Chemicals Handbook 1984,  p. C38).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be  Taken in Case Material is Released or Spilled)

    This compound  is a fungicide  (Buchel 1983, p.  283).   Keep  unnecessary
    people away; isolate hazard area and deny entry.  Stay  upwind; keep out of
    low areas.  Ventilate closed spaces before entering them.  Wear  positive
    pressure  breathing apparatus and special protective clothing.  Remove and
    isolate contaminated clothing at the site.  Do not touch spilled material;
    stop leak if you can do so without risk.  Use water spray  to reduce
    vapors.   Small spills:  absorb with sand or other noncombustible absorbent
    material  and place into containers for later disposal.   Small  dry  spills:
    with clean shovel place material into clean, dry container and cover; move
    containers from  spill area.  Large spills:  dike far ahead of  spill for
    later disposal (DOT  1984, Guide 55).

-------
                                     CAS Registry Number:  21564-17-0
                                     Page 4 of 4
                         THIOCYANIC ACID,
                2-(BENZOTHIAZOLYLTHIO)METHYL ESTER
COMMENTS:

    Sources searched but  no  information found:
       ACGIH 1983
       NIOSH/OSHA 1978
       Hawley 1981
       Weast 1979
       Merck 1983
       Sax 1984
       NFPA 1984
       Student 1981
       Weiss 1980
       CHRIS 1978
       Doull 1980
       Clayton and Clayton  1981-82
       Arena 1979
       Encyc Occupat Health and Safety 1983
       Hayes 1982
       Physicians' Desk  Reference 1985
       Oilman 1985

-------
                                            CAS  Registry  Number:  21609-90-5
                                            Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                    INTERIM
                                                    Date: October 34., 1985
                                                    Revision:
CHEMICAL IDENTITY -- LEPTOPHOS

CAS Registry Number:   21609-90-5

Synonyms:  Phosphonothioic  Acid, Phenyl-, 0-(4-Bromo-2,5-Dichlorophenyl)
0-Methyl Ester;  Abar  (Velsicol); Fosvel; K62-105;  Lepton; MBCP; NK 711;
0-(2,5-Dichloro-4-Bromophenyl) 0-Methyl Phenylthiophosphonate; 0-(2,5-
Dichloro-4-Bromophenyl) 0-Methyl Phenyl Thiophosphonate; 0-(4-Bromo-2,5-
Dichlorophenyl)  0-Methyl Phenylphosphonothioate; 0-(4-Bromo-2,5-Dichloro-
phenyl) 0-Methylphenylphosphonothioate; 0-4-Bromo-2,5-Dichlorophenyl-0-Methyl
Phenylphosphonothioate; Oleophosvel; V.C.S.;  VCS 5-D; VDS-506; Velsicol 506;
Velsicol VCS  506; VVS-506

Chemical Formula:  C  H  BrCl 0 PS

Molecular Weight:  412.07


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not  Found

    Other Limits Recommended:  Toxicity information:  ID   oral (rat) 30

    mg/kg; LD5Q  dermal  (mammal) 50 mg/kg (*NIOSH/RTECS  1985)


SECTION II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H20=l):  1.53  at 25°C (*Worthing 1979)

    Vapor Pressure  (mmHg):  Not Found

    Melting Point:  158-159°F, 70.2-70.6°C  (''Worthing 1979)

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl  acetate=l):  Not-Found

    Solubility in Water:  2.4 mg/liter (*Worthing 1979)

-------
                                      CAS  Registry Number:  21609-90-5
                                      Page 2 of 3
                            LEPTOPHOS
SECTION  II - PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Appearance  and Odor:  White crystalline  ("Spencer 1982) or colorless
    amorphous  solid  (^Worthing 1979);  the  technical product is a light tan
    powder (-Spencer 1982).
SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):   Not  Found
    Flammable Limits:
        LEL:  Not Found
        UEL:  Not Found

    Extinguishing Methods:   (Non-Specific  -- Organophosphorus Pesticide,
    n.o.s.)   This material may burn, but does not ignite readily.  For small
    fires, use dry chemical, carbon  dioxide, water spray, or foam.   For large
    fires, use water spray,  fog, or  foam  (DOT 1984, Guide 55).

    Special  Fire Fighting  Procedures:   (Non-Specific -- Organophosphorus
    Pesticide, n.o.s.)  Stay upwind; keep out of low areas.  Move container
    from fire area if you can do it  without risk.  Fight fire from maximum
    distance.  Dike fire control water for  later disposal; do not scatter  the
    material (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:    (Non-Specific  -- Organophosphorus
    Pesticide, n.o.s.)  Container may explode in heat of fire.  Fire may
    produce  irritating or poisonous  gases (DOT  1984, Guide 55).
SECTION  IV  --  REACTIVITY  DATA                              :

    Stability:  Unstable:
                Stable:  Yes  (*Spencer  1982)

        Conditions to Avoid:  Strong alkalies  (*Worthing 1979)

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Decomposes above 356°F,  180°C
    (*Spencer  1982)

    Hazardous Polymerization:  May Occur:   Not Found
                               May Not Occur:   Not  Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  21609-90-5
                                      Page 3  of 3
                             LEPTOPHOS
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (Non-Specific -- Organophosphorus
                                  Pesticide, n.o.s.) (DOT 1984, Guide 55)
                       Skin:   Yes  (*Sax  1979)
                       Ingestion:  Yes (*Sax 1979)

    Health Hazards  (Acute, Delayed,  and Chronic):   This  material  is highly
    toxic; it is capable of causing death or permanent injury by exposure
    during°normal use ("Sax 1979).

    Signs and Symptoms  of Exposure:   Symptoms  may include nausea, vomiting,
    abdominal cramps,  diarrhea,  excessive salivation, headache, giddiness,
    weakness, muscle twitching,  difficult breathing, blurring or dimness of
    vision,  and  loss of muscle coordination.  Death may occur from failure  of
    the respiratory center, paralysis of the respiratory muscles,  intense
    bronchoconstriction,  or all  three (*Gosselin 1976).

    Medical  Conditions  Generally Aggravated by  Exposure:  Not Found

    Emergency and  First Aid  Procedures:   (Non-Specific -- Organophosphorus
    Pesticide, n.o.s.)   Move victim to fresh air; call emergency medical
    care.   If not breathing, give  artificial respiration.  If breathing is
    difficult, give oxygen.  In  case of contact with material, immediately
    flush skin or eyes  with running water for at least 15 minutes.  Speed in
    removing material from skin  is of extreme importance.  Remove and isolate
    contaminated clothing and  shoes at the  site.  Keep victim quiet and
    maintain normal body temperature.  Effects may be delayed; keep victim
    under observation (DOT 1984, Guide 55).


SECTION  VI --  USE INFORMATION

    This material is used as an  insecticide; its use is not permitted in the
    U.S. (*SRI).  Denied registration as a  pesticide in the U.S. (USEPA/
    Pesticide Index 1985).


SECTION  VII -- PRECAUTIONS  FOR SAFE  HANDLING  AND USE
(Steps to be Taken in Case Material is Released or  Spilled)

    (Non-Specific -- Organophosphorus Pesticide, n.o.s.)  Stay upwind; keep
    out of low areas.   Ventilate closed spaces before entering them.  Wear
    positive pressure breathing  apparatus and special protective clothing.   Do
    riot touch spilled material;  stop leak if you can do it without risk.  Use
    water spray  to reduce vapors.  Small dry spills:  with clean shovel place
    material into clean, dry container and  cover; move containers from spill
    area (DOT 1984, Guide 55).

-------
                                           CAS Registry Number:  21908-53-2
                                           Page  1  of 3
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date: October 31.  1985
                                                   Revision:
CHEMICAL IDENTITY -- MERCURIC OXIDE

CAS Registry Number:   21908-53-2

Synonyms:  Mercury(II)  Oxide; CI 77760; Hydrargyrum Oxid Flav; Mercuric
Oxide,  Red;  Mercuric Oxide, Solid (DOT);  Mercuric Oxide, Yellow;  Mercuric
Oxides, Red  and Yellow; Mercury Monoxide; Mercury Oxide (HgO);  Mercury(2+)
Oxide;  Natural Mbntroydite; Red Oxide of Mercury; Red Precipitate;  Santar;
Santar  M;  Yellow Mercuric Oxide;  Yellow  Oxide of Mercury; Yellow  Precipitate

Chemical Formula:   HgO

Molecular  Weight:  216.61


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  0.1 mg/m3 (*NIOSH/OSHA  1981)

    ACGIH TLV:   TWA  0.1  mg/m3  (ACGIH 1985,  p.  22); STEL 0.15 mg/m3
    (*ACGIH  1981)

    IDLH:  Not Found

    Other Limits Recommended:   Exposure to inorganic  mercury, recommended
    standard -- TWA 0.05 mg/m3 (mercury  content).  Toxicity information:
    LD5Q oral (rat) 18 mg/kg (*NIOSH/RTECS  1985).


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H20=l):   11.1 at 39°F, 4°C (*Weast 1979)

    Vapor Pressure (mmHg):  Not Found

    Melting  Point:   Decomposes  at 932°F, 500°C (*Weast  1979)

    Vapor Density (AIR=1):  Not  Found

    Evaporation  Rate  (Butyl acetate=l):   Not  Found

-------
                                      CAS Registry Number:   21908-53-2
                                      Page 2 of 3
                          MERCURIC OXIDE
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Solubility in Water:   0.053 grams/liter at 77°F,  25°C;  0.395
    grams/liter at  212°F,  100°C  (*Weast 1979)

    Appearance and Odor:  Red or orange-red heavy  crystalline powder or
    scales,  yellow  when  finely powdered; odorless (*Merck  1976)
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable  Limits:  Not Flammable (Weiss 1980,  p.  585)
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  For small  fires,  use  dry chemical, carbon
    dioxide, water spray, or foam.  For large fires,  use water spray, fog, or
    foam (DOT 1984,  Guide 53).

    Special  Fire Fighting  Procedures:  Wear full  body protective clothing
    and self-contained breathing apparatus (*Rumack 1975 to Present).

    Unusual  Fire and Explosion Hazards:  When heated to decomposition
    (932°F,  500°C) it decomposes into mercury and oxygen.  Fumes from fire may
    contain  poisonous mercury vapor; oxygen may increase intensity of fire
    (*CHRIS  1978).   Explosion of mercuric oxide may occur with friction or
    application of heat (*Rumack 1975 to Present).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (Weiss 1980,  p.  585)

        Conditions to Avoid:  Light; may decompose into mercury  and oxygen
        (*Merck 1976).

    Incompatibility (Materials to Avoid):   Reducing agents (*Merck 1976).

    Hazardous  Decomposition or Byproducts:   Decomposes into mercury and
    oxygen at 932°F, 500°C (*CHRIS 1978).

    Hazardous  Polymerization:   May Occur:
                               May Not  Occur:  Yes (Weiss  1980, p. 585)

        Conditions to Avoid:  Not Found

-------
                                       CAS  Registry  Number:  21908-53-2
                                       Page 3 of 3
                           MERCURIC OXIDE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (*Sax  1975)
                       Skin:   Yes  (*Sax 1975)
                       Ingestion:  Yes  (*Sax 1975)

    Health Hazards  (Acute, Delayed,  and Chronic):  This material  is highly
    toxic by ingestion, inhalation,  or  skin absorption.  Very short exposure
    to small quantities may cause death  or permanent injury (*Sax 1975).
    Following ingestion,  mercuric oxide  is readily converted to mercuric
    chloride, the most dangerous mercury compound.  Mercuric oxide dust has  a
    corrosive effect on eyes,  skin,  and  respiratory tract (*Rumack 1975 to
    Present).

    Signs and Symptoms  of Exposure:   Symptoms caused by inhalation of dust
    include tightness and pain in chest, coughing, and difficulty in
    breathing.   Ingestion causes destruction of tissue, pain, vomiting, and
    severe diarrhea.  Contact  with eyes  causes ulceration.   Contact with skin
    causes irritation and possible dermatitis (Weiss 1980,  p. 585).

    Medical  Conditions Generally Aggravated by Exposure:   People with a
    history of allergies  or known sensitization to mercury,  chronic
    respiratory disease,  nervous system  disorders, or kidney disorders are at
    increased risk from exposure (*NIOSH/OSHA 1981).

    Emergency and  First Aid  Procedures:  In case of ingestion, action
    within 10-15 minutes  is very important because this material is absorbed
    very rapidly.   Give egg whites,  milk, or activated charcoal and induce
    vomiting.  If eyes are exposed,  flush with water for at least 15 minutes.
    If skin is exposed, wash with soap  and water  (*CHRIS 1978).
SECTION  VI  --  USE  INFORMATION

    Chemical  intermediate  for  mercury salts, organic mercury compounds, and
    chlorine  monoxide;  antiseptic  in Pharmaceuticals; component of dry cell
    batteries;  pigment  and glass modifier; fungicide; preservative in
    cosmetics;  analytical  reagent;  formerly used in antifouling paints (*SRI)


SECTION  VII --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be  Taken in Case Material is Released or Spilled)

    Isolate hazard area.   Stay upwind; keep out of low areas.  Wear
    self-contained (positive pressure if available) breathing apparatus and
    full protective clothing.  Do  not touch spilled material.  Take up small
    spills with sand or other  non-combustible absorbent material and place
    into containers for later  disposal.  For small, dry spills, use clean
    shovel to place material into  clean dry containers.   Dike far ahead of
    large spills for later disposal (DOT 1984, Guide 53).

-------
                                           CAS  Registry Number:  21923-23-9
                                           Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- CHLORTHIOPHOS

CAS Registry  Number:  21923-23-9

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 3, p.  150)
Phosphorothioic Acid, 0,0-Diethyl  0-((2,5-Dichloro-4-Methylthio)Phenyl) Ester;
Celamerck S°-2957; Celathion;  CM  S  2957; 0-(Dichloro(Methylthio)Phenyl)
0,0-Diethyl  Phosphorothioate  (3  isomers); 0,0-Diethyl-0-2,4,5-Dichloro-
(Methylthio)Phenyl Thionophosphate; ENT 27635;  QMS  1342; S 2957

Chemical Formula:   C H--C1 0 PS

Molecular Weight:  361.25


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LDc0 oral (rabbit)
    20 mg/kg (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    EJoiling Point:   307-316°F, 153-158°C  at 0.013 mmHg (Worthing  1983,
    p. 130)

    Specific Gravity (H  0=1):  1.345 at 20°C  (Worthing 1983,  p.  130)

    Vapor Pressure  (mmHg):  4 x 10"4  at 25°C (Worthing 1983, p. 130)

    Melting  Point:   Not  Found

    Vapor Density (AIR=1):  Not Found

    Eivaporation  Rate (Butyl acetate=l):   Not Found

-------
                                      CAS Registry Number:  2192*3-23-9
                                      Page 2 of 4
                          CHLORTHIOPHOS


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Solubility  in Water:  0.3 mg/liter  (Worthing 1983, p.  130)

    Appearance and  Odor:  Yellow-brown  liquid which tends to crystallize at
    less than  25°C (Worthing 1983,  p.  130)


SECTION  III  -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing Methods:   (Non-Specific -- Organophosphorus  Pesticide,
    Liquid, n.o.s.)  This material  may burn, but does not  ignite  readily.  For
    small  fires, use dry chemical,  carbon dioxide, water spray, or  foam.  For
    large  fires, use water spray,  fog,  or foam (DOT 1984,  Guide 55).

    Special Fire Fighting  Procedures:   (Non-Specific -- Organophosphorus
    Pesticide, Liquid, n.o.s.)   Stay upwind; keep out of low areas.   Move
    containers from fire area if you can do so without risk.   Fight  fire from
    maximum distance.  Dike fire control water for later disposal; do not
    scatter the material (DOT 1984, Guide 55).

    Unusual Fire  and Explosion  Hazards:   (Non-Specific -- Organophosphorus
    Pesticide, Liquid, n.o.s.)   Container may explode in heat  of  fire (DOT
    1984,  Guide 55).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or  Byproducts:  Not Found

    Hazardous Polymerization:  May Occur:   Not Found
                               May Not Occur:   Not  Found

        Conditions to Avoid:  Not Found

-------
                                      CAS  Registry  Number:  21923-23-9
                                      Page 3 of 4
                           CHLORTHIOPHOS
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (Non-Specific -- Organophosphorus
                                  Pesticide)  (Hayes 1982, p. 301)
                       Skin:   Yes  (Non-Specific  -- Organophosphorus
                              Pesticide)  (Hayes  1982, p. 301)
                       Ingestion:  Yes (Non-Specific -- Organophosphorus
                                  Pesticide)  (Hayes 1982, p. 301)

    Health Hazards  (Acute, Delayed,  and Chronic):   Classified as  extremely
    hazardous  by the World Health Organization (Encyc Occupat Health and
    Safety 1983,  p.  1619)  (Non-Specific -- Organophosphorus Pesticide)
    Organic phosphorus  insecticides are absorbed by the skin, as well as by
    the respiratory  and gastrointestinal  tracts.  They are cholinesterase
    inhibitors (Hayes 1982, p.  301).

    Signs and Symptoms of Exposure:   (Non-specific  -- Organophosphorus
    Pesticide)  Symptoms are headache, giddiness, blurred vision,  nervousness,
    weakness,  nausea, cramps,  diarrhea, and discomfort in the chest.  Signs
    include sweating, tearing,  salivation, vomiting, cyanosis, convulsions,
    coma,  loss of reflexes and loss of sphincter control (Hayes 1982, p. 3021.

    Medical Conditions  Generally Aggravated by  Exposure:  Not Found

    Emergency and  First Aid Procedures:  (Non-Specific -- Organophosphorus
    Pesticide, Liquid,  n.o.s.)  Move victim to fresh air;  call emergency
    medical care.  If not  breathing, give artificial respiration.   If
    breathing  is difficult, give oxygen.  In case of contact with material,
    immediately flush skin or  eyes with running water for at least 15
    minutes.   Speed  in removing material  from skin is of extreme importance.
    Remove and isolate  contaminated clothing and shoes at the site.  Keep
    victim quiet and maintain  normal body temperature.  Effects may be
    delayed; keep victim under observation (DOT  1984, Guide 55).


SECTION  VI --  USE INFORMATION

    Product discontinued by Celamerck.  It is used as an insecticide and
    acaricide  (Farm  Chemicals  Handbook 1984, p. C55).

-------
                                      CAS Registry Number:   21923-23-9
                                      Page 4 of 4
                          CHLORTHIOPHOS
SECTION  VH  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be Taken  in Case Material is Released  or  Spilled)

    (Non-Specific  -- Organophosphorus Pesticide,  Liquid, n.o.s.)  Stay upwind;
    keep out of low areas.  Ventilate closed spaces before entering them.
    Wear positive pressure breathing apparatus and  special protective
    clothing.   Do not touch spilled material; stop  leak if you can do so
    without risk.   Use water spray to reduce vapors.   Small spills:  absorb
    with sand  or other non-combustible absorbent  material and place into
    containers for  later disposal.  Large spills:   dike far ahead of spill for
    later  disposal  (DOT 1984, Guide 55).


COMMENTS

    Sources searched but no information found:
        Weast  1979
        Hawley 1981
        Clayton and Clayton 1981-82
        Doull  1980
        Buchel 1983
        Merck  1983
        Student 1981
        NFPA 1984
        Gosselin 1984
        Verschueren 1983
        Weiss  1980
        ACGIH  1984
        NIOSH/OSHA  1978

-------
                                     CAS Registry Number:   22224-92-6
                                     Page 1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- FENAMIPHOS

CAS Registry Number:  22224-92-6

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 3,  p.  126)   Phosphoramidic
Acid,  Isopropyl-, 4-(Methylthio)-m-Tolyl Ethyl Ester; BAY  68138; ENT 27572;
Ethyl  3-Methyl-4-(Methylthio)Phenyl  (l-Methylethyl)Phosphoramidate; Ethyl
4-(Methylthio)-m-Tolyl Isopropylphosphoramidate; Isopropylamino-0-Ethyl-(4-
Methylmercapto-3-Methylphenyl)  Phosphate; l-(Methylethyl)-Ethyl 3-Methyl-4-
(Methylthio)Phenyl Phosphoramidate;  Nemacur; Nemacur P;  Phenamiphos;
Phosphoramidic Acid, (1-Methylethyl)-, Ethyl (3-Methyl-4-(Methylthio)Phenyl)
Ester

Chemical Formula:   C  H NO PS

Molecular  Weight:  303.39


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not  Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LC   inhalation
    (rat)  0.091 mg/liter/4 hours (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not  Found

    Specific Gravity (H_0=l):  Not Found

    Vapor Pressure  (mmHg):  9.8 x 10   at 86°F, 30°C (Farm Chemicals
    Handbook  1984, p. C161)

    Melting Point:   121°F,  49.2°C  (Farm Chemicals Handbook 1984, p. C161)

    Vapor Density (AIR=1): Not Found

    Evaporation  Rate (Butyl acetate=l):   Not Found

-------
                                      CAS Registry Number:  22224-92-6
                                      Page 2 of 4
                             FENAMIPHOS
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Solubility in Water:   400 mg/liter (Farm Chemicals Handbook 1984,
    p. C161);  700  mg/liter at 20°C  (Worthing 1983)

    Appearance and Odor:  Brown, waxy solid (Farm Chemicals Handbook 1984,
    p. C161);  colorless  solid (Worthing 1983)
SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:   (Non-Specific -- Organophosphorus  Pesticide,
    n.o.s.)   This material  may burn, but does not ignite readily.   For small
    fires, use dry chemical,  carbon dioxide, water spray,  or foam.   For large
    fires, use water spray,  fog, or foam (DOT 1984, Guide  55).

    Special  Fire Fighting Procedures: (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)   Stay upwind; keep out of low areas.   Move  container
    from fire area if you can do it without risk.   Fight fire from maximum
    distance.   Dike fire control water for later disposal; do not  scatter the
    material.   Wear positive pressure breathing apparatus  and special
    protective clothing  (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific -- Organophosphorus
    Pesticide,  n.o.s.)   Container may explode in heat of fire.   Fire and
    runoff from fire control water may produce irritating  or poisonous gases
    (DOT 1984,  Guide 55).
SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Yes (Farm Chemicals Handbook 1984,  p.  C161)

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Emits toxic fumes of nitrogen
    oxides,  phosphorus  oxides, and sulfur oxides when heated to decomposition
    (Sax 1984, p. 1376).

-------
                                      CAS Registry Number:  22224-92-6
                                      Page 3 of 4
                            FENAMIPHOS
SECTION  IV --  REACTIVITY DATA (Continued)

    Hazardous Polymerization:   May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Sax 1984,  p.  1376)
                      Skin:  Yes  (Sax 1984, p. 1376)
                      Ingestion:   Yes (Sax 1984,  p.  1376)

    Health Hazards  (Acute, Delayed,  and  Chronic):  This material is highly
    toxic  orally,  by inhalation, and by absorption through  the  skin  (Sax 1984,
    p.  1376).   (Non-Specific -- Parathion)  Death  may occur from  respiratory
    failure (Gosselin 1984, p. III-340).

    Signs  and Symptoms of Exposure:  (Non-Specific -- Parathion)   Symptoms
    may include  nausea, vomiting, abdominal cramps,  diarrhea, excessive
    salivation,  headache,  giddiness, weakness,  muscle twitching,  difficult
    breathing, blurring or dimness of vision,  and  loss of muscle
    coordination.  Death may occur from failure of the respiratory center,
    paralysis  of the respiratory muscles, intense  bronchoconstriction, or all
    three  (Gosselin  1984,  p. III-340).

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  (Non-Specific -- Organophosphorus
    Pesticides,  n.o.s.)  Move victim to fresh  air; call emergency medical
    care.   If  not  breathing, give artificial respiration.   If breathing is
    difficult, give  oxygen.  In case of contact with material,  immediately
    flush  skin or  eyes with running water for  at least 15 minutes.   Speed in
    removing material from skin is of extreme  importance.   Remove and isolate
    contaminated clothing  and shoes at the site.  Keep victim quiet  and
    maintain normal  body temperature.  Effects  may be delayed;  keep  victim
    under  observation (DOT 1984, Guide 55).
SECTION  VI  --  USE INFORMATION

    This material  is used as a nematocide (Farm Chemicals  Handbook  1984, p.
    C161).

-------
                                      CAS Registry Number:   22224-92-6
                                      Page 4 of 4
                            FENAMIPHOS
SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be  Taken  in Case Material is Released  or  Spilled)

    (Non-Specific -- Organophosphorus Pesticide, n.o.s.)  Stay upwind; keep
    out of low  areas.  Ventilate closed spaces before  entering them.  Wear
    positive  pressure breathing apparatus and special  protective clothing.
    Remove and  isolate contaminated clothing at  the site.  Do not touch
    spilled material.  Use water spray to reduce vapors.  Take up small spills
    with sand or other noncombustible absorbent  material and place in
    containers  for  later disposal.  Take up small,  dry spills with clean
    shovel and  place in clean, dry container.  Dike far ahead of large spills
    for later disposal (DOT 1984, Guide 55).

-------
                                      CAS  Registry Number:  23135-22-0
                                      Page 1  of 4
                       EPA CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- OXAMYL

CAS Registry Number:   23135-22-0

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume 2, p. 910):  Oxamimidic
Acid, N1,N'-Dimethyl-N-((Methylcarbamoyl)oxy)-l(Methylthio);  D-1410;
2-Dimethylamino-l-(Methylthio)Glyoxal  0-Methylcarbamoylmonoxime;  DPX  1410;
Insecticide-Nematicide 1410; Thioxamyl;  Vydate; Methyl 2-(Dimethylamino)-N-
(((Methylamino)Carbonyl)Oxy)-2-Oxoethanimidothioate; S-Methyl
l-(Dimethylcarbamoyl)-N-(Methylcarbamoyl)Oxy)Thioformimidate; Methyl
N1,N*-Dimethyl-N-((Methylcarbamoyl)Oxy)-l-Thiooxamimidate; Vydate L Oxamyl
Insecticide/Nematocide

(Hayes 1982 Synonyms, p. 457)  N,N-Dimethyl-alpha-Methylcarbamoyloxyimino-
alpha-(Methylthio)acetamide

Chemical  Formula:  C H  N 0 S

Molecular  Weight:  219.29


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:   Not  Found

    IDLH:  Not Found

    Other Limits  Recommended:   Toxicity information:   LC   inhalation

    (rat)  0.17 mg/liter/1 hour (*NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure  (mmHg):  2.3xlO~4  at 25°C  (Hayes 1982, p. 457)

    Melting Point:  212-216°F,  100-102°C; changes to form melting at
    226-230°F, 108-110°C (Hayes 1982,  p.  457)

-------
                                            CAS Registry Number:  23135-22-0
                                            Page 2 of 4
                             OXAMYL
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (continued)

    Vapor  Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):   Not Found

    Solubility in Water:   Solubility 28 g/100 g at 25°C (Farm Chemicals
    Handbook 1984,  p. C170)

    Appearance and Odor:  White, crystalline solid (Farm Chemicals  Handbook
    1984,  p. C170)  with  slight sulfurous odor (Hayes 1982, p. 457).


SECTION  III -- FIRE AND  EXPLOSION HAZARD  DATA

    Flash  Point (Method  Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not  Found

    Extinguishing  Methods:  This is a solid carbamate pesticide  (Hayes
    1982,  p. 457).   Extinguish fire using agent suitable for type of
    surrounding fire, as the material itself does not burn or burns with
    difficulty. Use water  in flooding quantities as a fog.   Use  alcohol foam,
    carbon dioxide  or dry chemical (Student 1981, p. 104).

    Special  Fire Fighting Procedures:  This is a solid carbamate  pesticide
    (Hayes 1982, p.  457).   Move container from fire area.  Fight  fire from
    maximum distance.  Dike fire control water for later disposal; do not
    scatter the material.   Wear positive pressure breathing apparatus and
    special protective clothing (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:  When heated to  decomposition, it
    emits  toxic fumes of nitrogen oxides and sulfur oxides (Sax 1984, p.
    1174).   This is a solid carbamate pesticide (Hayes 1982, p. 457).
    Container may  explode in heat of fire (DOT 1984, Guide 55).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:
                Stable:  Yes (Hayes 1982, p.  457)

        Conditions  to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):   Not Found

-------
                                            CAS Registry Number:  23135-22-0
                                            Page 3 of 4
                             OXAMYL
SECTION  IV --  REACTIVITY DATA  (continued)

    Hazardous Decomposition or  Byproducts:  When heated to decomposition,
    hazardous fumes  of  nitrogen  oxides and sulfur oxides may be emitted (Sax
    1984,  p. 1174).

    Hazardous Polymerization:   May Occur  Not  Found:
                                May Not Occur:  Not Found

        Conditions to Avoid:  Not  Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Sax 1984, p. 1174)
                      Skin:   Yes  (Gosselin 1984, p. 11-308)
                      Ingestion:  Yes (Hayes  1982,  p.  458)

    Health Hazards  (Acute, Delayed,  and  Chronic):   Classified by the World
    Health Organization  as highly hazardous (Encyc Occupat Health and Safety
    1983,  p.  1622).   Has also  been rated as extremely to super-toxic (Gosselin
    1984,  p.  11-308).  Acute oral exposure (ingestion)  to oxamyl has caused
    death (Hayes  1982, p. 458).  Oxamyl is a potent cholinesterase inhibitor
    (Gosselin 1984,  p. 11-308).

    Signs and Symptoms of Exposure:  Symptoms  include weakness, blurred
    vision,  nausea,  abdominal  cramps, constricted pupils, sweating and muscle
    tremors.   Oral,  dermal, and  ocular exposure may produce poisoning,
    although dermal  absorption is slow (Gosselin 1984,  p. 11-308).

    Medical  Conditions Generally Aggravated by  Exposure:  Not  Found

    Emergency and  First Aid  Procedures:  This  is a solid carbamate
    pesticide (Hayes 1982, p.  457).  Move victim to fresh air;  call emergency
    medical care.   If not breathing, give artificial respiration.   If
    breathing is  difficult, give oxygen.   In case of contact with material,
    immediately  flush skin or  eyes with running water for at least 15
    minutes.   Speed  in removing  material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes  at the site.  Keep
    victim quiet  and maintain  normal body temperature.   Effects  may be
    delayed;  keep victim under observation (DOT  1984, Guide 55).

-------
                                            CAS Registry Number:   23135-22-0
                                            Page 4 of 4
                             OXAMYL
SECTION  VI  --  USE INFORMATION

    Used as an insecticide, nematicide and acaricide on many  field crops,
    vegetables,  fruits, and ornamentals (Farm Chemicals Handbook 1984, p.
    C170).
SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or Spilled)

    This is  a solid carbamate pesticide (Hayes 1982,  p. 457).  Keep
    unnecessary people away; isolate hazard areas  and deny entry.  Stay
    upwind,  keep out of low areas.  Wear positive  pressure breathing apparatus
    and special protective clothing including boots,  gloves and goggles.  Do
    not touch spilled material, or breathe the vapors, dusts or fumes from
    burning  materials.  Do not handle broken packages without protective
    equipment.  Wash away any material that may have  contacted the body with
    soap and water  (Student 1981, p. 104; DOT 1984, Guide 55).


COMMENTS
    Sources  searched but no information found:
        ACGIH 1984
        NIOSH/OSHA  1978
        Merck 1983
        Oilman 1985
        Weiss  1980
        Clayton and Clayton 1981-82
        Student 1981
        Arena 1978

-------
                                           CAS Registry Number:  23422-53-9
                                           Page  1  of 3
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- FORMETANATE

CAS Registry Number:   23422-53-9

Synonyms:  Formetanate Hydrochloride; Carbamic Acid, Methyl-, Ester with
N1-(m-Hydroxyphenyl)-N,N-Dimethylformamidine, Monohydrochloride;  Carzol;
Carzol SP;  ENT 27566; EP 332; Formetanate Monohydrochloride;
m-(((Dimethylamino)Methylene)Amino)Phenyl Methylcarbamate Hydrochloride;
Methanimidamide, N,N-Dimethyl-N'-(3-(((Methylamino)Carbonyl)Oxy)Phenyl)-,
Monohydrochloride; N,N-Diraethyl-N'-(3-(((Methylamino)Carbonyl)Oxy)Phenyl)
methanimidamide; Schering 36056;  SN 36056

Chemical Formula:   C  H N-0 »C1H

Molecular Weight:  257.8


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:   Toxicity information:   LC   inhalation

    (rat)  0.16 mg/liter/1 hour (*NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling Point:   Not  Found

    Specific Gravity (H 0=1): Not Found

    Vapor Pressure  (mmHg):  2 x  10"8  (Worthing  1983)

    Melting Point:   392-396°F, 200-202°C (decomposes)  (Farm Chemicals
    Handbook  1983, p. C46)

    Vapor Density (AIR=1):  Not  Found

    Evaporation Rate (Butyl  acetate=l):  Not Found

-------
                                      CAS  Registry Number:  23422-53-9
                                      Page 2 of 3
                           FORMETANATE


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility  in Water:  Greater than 50% ("Spencer 1973)

    Appearance and Odor:  White powder with  a  faint odor (*Martin and
    Worthing  1974)


SECTION  III  -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not  Found
    Flammable Limits:
        LEL:  Not Found
        UEL:  Not Found

    Extinguishing  Methods:   (Non-Specific --  Carbamates Pesticide,  Solid,
    n.o.s.)  Extinguish fire using agent suitable for type of surrounding
    fire,  as the material itself does not burn or burns with difficulty.   Use
    water  in flooding quantities as  a fog.   Use  alcohol foam, carbon dioxide,
    or dry chemical  (Student 1981, p.  104).

    Special Fire Fighting  Procedures:   (Non-Specific -- Carbamate
    Pesticide, Solid, n.o.s.)   Wear  self-contained breathing apparatus when
    fighting fire  involving this material (Student 1981, p. 104).  Move
    container  from  fire area if you  can do it  without risk.  Fight fire from
    maximum distance.  Dike fire control water for later disposal; do not
    scatter the material (DOT 1984,  Guide 55).

    Unusual Fire  and Explosion Hazards:  This material may burn but does
    not ignite readily.  Container may explode in heat  of fire (DOT 1984,
    Guide  55).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:
                Stable:  Yes  (-Spencer 1973)

        Conditions to Avoid:  Hydrolyzed at  pH less than 4 (*Martin and
        Worthing 1974)

    Incompatibility  (Materials  to Avoid):  Not  Found

    Hazardous Decomposition or Byproducts:   Not Found

    Hazardous Polymerization:  May  Occur:  Not Found
                               May Not Occur:   Not  Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  23422-53-9
                                      Page 3 of 3
                            FORMETANATE
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes  (Non-Specific -- Carbamate)
                                   (Doull  1980, p. 375)
                       Skin:   No (Gosselin 1984,  p. 11-306)
                       Ingestion:  Yes (Non-Specific -- Carbamate)
                                   (Doull  1980, p. 375)

    Health Hazards  (Acute, Delayed, and Chronic):  Extremely  toxic  to
    humans.   Not absorbed through  contact  with skin.  Inhalation or ingestion
    may cause poisoning.   Inhibits cholinesterase activity so effects are in
    relation to action on nervous  system and can  result in death (*Rumack 1975
    to Present; Gosselin  1984, p.  11-306).

    Signs and  Symptoms  of Exposure:   Diarrhea,  nausea, vomiting,  excessive
    salivation, headache, pinpoint pupils  and uncoordinated muscle movements
    are all  common symptoms  ("Rumack 1975  to Present).

    Medical  Conditions  Generally Aggravated by Exposure:   Not Found

    Emergency and  First  Aid Procedures:   (Non-Specific -- Carbamate
    Pesticide,  Solid,  n.o.s.)  Move the victim to fresh air and monitor for
    respiratory distress. Although it is  not absorbed through contact with
    the skin (Gosselin 1984, p.  11-306) it  is advisable to flush skin or eyes
    with running water for at  least 15 minutes in case of contact.  Remove all
    contaminated clothing (DOT 1984, Guide  55).


SECTION  VI -- USE INFORMATION

    Plant  insecticide,  acaricide,  and miticide (*Martin and Worthing 1974,
    *SRI).


SECTION  VII  —  PRECAUTIONS  FOR SAFE  HANDLING  AND USE
(Steps to  be Taken in Case Material is Released or Spilled)

    (Non-Specific -- Carbamate Pesticide,  Solid, n.o.s.)  Keep unnecessary
    people away;  isolate  hazard  areas and  deny entry.   Stay upwind and keep
    out of low areas.   Wear positive pressure breathing apparatus and special
    protective clothing,  to  include boots,  gloves, and goggles.  Do not touch
    spilled  material or breathe  the dusts,  vapors, or fumes from burning
    materials.   Do not handle  broken packages without protective equipment.
    Wash away any material that  may have contacted the body with soap and
    water  (Student 1981,  p.  104; DOT 1985,  Guide 55).

-------
                                           CAS Registry Number:  23505-41-1
                                           Page 1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- PIRIMIFOS-ETHYL

CAS Registry Number:  23505-41-1

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 3, p. 150)   Pirimiphos-
Ethyl;  Phosphorothioic Acid,  0,0-Diethyl 0-(2-(Diethylamino)-6-Methyl-4-
Pyrimidinyl)  Ester; 0-(2-(Diethylamino)-6-Methyl-4-Pyrimidinyl) 0,0-Diethyl
Phosphorothioate; 2-Diethylamino-6-Methylpyrimidin-4-yl Diethylphosphoro-
thionate;  0,0-Diethyl 0-(2-Diethylamino-6-Methyl-4-Pyrimidinyl)
Phosphorothioate; Fernex;  Pirimifosethyl; PP211; Primicid;  Primotec; Prinicid;
Phosphorothioic Acid, 0-(2-(Diethylamino)-6-Methyl-4-Pyrimidinyl) 0,0-Diethyl
Ester

Chemical Formula:  C  H  NgO PS

Molecular  Weight:  333.43


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits  Recommended:  Toxicity information:   LDr0 oral (cat) 25
    mg/kg (^NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not  Found

    Specific Gravity (H 0=1):  1.14 at 20°C (Merck 1983,  p. 1082)

    Vapor Pressure  (mmHg):  2.9 x 10"4 at 25°C (Merck 1983, p.  1082)

    Melting Point:  Not  Found

    Vapor Density (AIR=1):  Not Found

-------
                                      CAS Registry Number:   23505-41-1
                                      Page 2 of 4
                          PIRIMIFOS-ETHYL


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Evaporation Rate (Butyl  acetate=l):  Not Found

    Solubility in Water:  Less than 1 mg/liter at 30°C (Merck  1983, p. 1082)

    Appearance and Odor:  Straw colored liquid (Merck 1983, p.  1082)


SECTION- Ill -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing  Methods:  Like other organophosphorus pesticides (Encyc
    Occupat Health  and Safety 1983, p. 1622), this material may burn, but does
    not ignite readily.  For small fires, use dry chemical, carbon dioxide,
    water spray, or  foam.  For large fires, use water spray,  fog, or foam (DOT
    1984,  Guide 55).

    Special  Fire Fighting Procedures:  Use procedures for  organophosphorus
    pesticides (Encyc Occupat Health and Safety 1983, p.  1622).   Stay upwind;
    keep out of low  areas.  Move containers from fire area if you can do it
    without risk.  Fight fire from maximum distance.   Dike fire control water
    for later disposal; do not scatter the material (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:  As with other organophosphorus
    pesticides (Encyc Occupat Health and Safety 1983, p.  1622), container may
    explode in heat  of fire (DOT 1984, Guide 55).   Heat may cause
    decomposition and evolution of highly toxic fumes of phosphorus oxides,
    nitrogen oxides  and sulfur oxides (Sax 1984, p.  1000).


SECTION  IV -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Decomposes above 130°C (Merck 1983, p.  1082)

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  When heated  to  decomposition,
    it emits very toxic fumes of nitrogen oxides,  phosphorus  oxides and sulfur
    oxides (Sax 1984, p. 1000).

-------
                                      CAS Registry Number:  23505-41-1
                                      Page 3 of 4
                          PIRIMIFOS-ETHYL
SECTION  IV --  REACTIVITY DATA  (Continued)

    Hazardous Polymerization:   May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Non-Specific -- Organic  Phosphorus
                                  Pesticides) (Hayes 1982,  p. 301)
                      Skin:  Yes  (Sax 1984, p. 1000)
                      Ingestion:   Yes (Sax 1984,  p.  1000)

    Health Hazards  (Acute, Delayed,  and  Chronic):  Pirimifos-ethyl is an
    organophosphorus pesticide  (Encyc Occupat Health and Safety  1983, p.  1622)
    and is absorbed  by the skin, as well as by the respiratory and
    gastrointestinal tracts.  It is a cholinesterase inhibitor,  acting on the
    nervous system (Hayes  1982, p. 301).

    Signs and Symptoms of Exposure:  As with other organophosphorus
    pesticides (Encyc Occupat Health and Safety 1983, p. 1622),  symptoms  are
    secondary to cholinesterase inhibition:  headache,  giddiness, blurred
    vision, nervousness, weakness, nausea, cramps, diarrhea, and discomfort in
    the chest.   Other signs include sweating, tearing,  salivation, vomiting,
    cyanosis, convulsions, coma, loss of reflexes and loss  of sphincter
    control (Hayes 1982, p. 302).

    Medical Conditions Generally Aggravated by Exposure:   Not  Found

    Emergency and  First Aid  Procedures:  Treat as organophosphorus
    pesticide (Encyc Occupat Health and Safety 1983,  p. 1622).   Move  victim to
    fresh air;  call  emergency medical care.  If not breathing, give artificial
    respiration.   If breathing  is difficult, give oxygen.   In case of contact
    with material, immediately  flush skin or eyes with running water  for  at
    least 15 minutes.  Speed in removing material from skin is of extreme
    importance.   Remove  and isolate contaminated clothing and shoes at the
    site.   Keep victim quiet and maintain normal body temperature.  Effects
    may be delayed;  keep victim under observation (DOT 1984, Guide 55).


SECTION  VI --  USE INFORMATION

    Pirimifos-ethyl  is an  organophosphorus pesticide (Encyc Occupat Health and
    Safety 1983,  p.  1622).

-------
                                      CAS Registry Number:  23505-41-1
                                      Page 4  of 4
                           PIRIMIFOS-ETHYL
SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    As with other organophosphorus pesticides (Encyc Occupat Health and Safety
    1983,  p. 1622),  stay  upwind; keep out of low areas.   Ventilate closed
    spaces before entering them.  Wear positive pressure breathing apparatus
    and special protective clothing.  Do not touch spilled material;  stop leak
    if you can do so without  risk.  Use water spray to reduce vapors.   Small
    spills:   absorb  with  sand or other non-combustible absorbent material and
    place into containers for later disposal.  Large spills:  dike far ahead
    of spill for later disposal  (DOT 1984, Guide 55).


COMMENTS

    Sources  searched,  no  information found:
        Farm Chemicals Handbook  1984
        Buchel 1983
        Clayton and  Clayton 1981-82

-------
                                           CAS Registry Number:   24017-47-8
                                           Page 1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- TRIAZOFOS

CAS Registry Number:  24017-47-8

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 3, p. 153):
Phosphorothioic Acid, 0,0-Diethyl  0-(l-Phenyl-l,2,4-Triazolyl) Ester;
0,0-Diethyl  0-(l-Phenyl-lH-l,2,4-Triazol-3-yl)Phosphorothioate; HOE 2960; HOE
2960 OJ;  Hostathion; l-Phenyl-3-(0,0-Diethyl Thionophosphoryl)-l,2,4-Triazole;
l-Phenyl-l,2,4-Triazolyl-3-(0,0-Diethyl Thionophosphate); Triazophos

Chemical  Formula:   CnoHn,N,00PS
                    12  ID  J j
Molecular Weight:  313.34


SECTION I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC  inhalation
    (rat) 0.28 mg/liter/4 hours  (*NIOSH/RTECS 1985)


SECTION II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Decomposes before boiling (Farm Chemicals Handbook
    1984, p.  C123)

    Specific Gravity (H20=l):  1.247 at 20°C/4°C (Worthing 1983)

    Vapor Pressure  (mmHg):  1 x 10"5  (Worthing 1983)

    Melting  Point:   32-41°F, 0-5°C for technical grade  (Worthing 1983)

    Vapor Density (AIR=1): Not Found

    Evaporation  Rate (Butyl acetate=l):   Not Found

-------
                                            CAS  Registry  Number:  24017-47-8
                                            Page 2 of 4
                            TRIAZOFOS
SECTION  II -- PHYSICAL/CHEMICAL  CHARACTERISTICS

    Solubility in Water:  30-40 mg/L at 20°C (Worthing  1983)

    Appearance  and Odor:  Yellowish oil (Worthing  1983)


SECTION  III --  FIRE AND EXPLOSION HAZARD DATA

    Flash  Point  (Method Used):  Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:  Not Found

    Extinguishing  Methods:  This is an organophosphate pesticide (Buchel
    1983,  p.  166).  Extinguish with dry chemical,  carbon dioxide, water spray,
    fog, or foam (DOT 1984, Guide 55).

    Special Fire Fighting Procedures:   This is  an  organophosphate pesticide
    (Buchel 1983,  p. 166).  Keep unnecessary people  away; isolate hazard area
    and deny entry.  Stay upwind; keep out of low  areas.  Ventilate closed
    spaces before  entering them.  Wear positive pressure breathing apparatus
    and special  protective clothing.  Remove and isolate contaminated clothing
    at the site.   Move container from fire area if you can do it without
    risk.   Fight fire from maximum distance.  Dike fire control water for
    later  disposal; do not scatter the material (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:  This is  an organophosphate
    pesticide (Buchel 1983, p. 166).  Some of these  materials may burn but
    none of them ignite  readily.  Container may explode in heat of fire.  Fire
    may produce  irritating or poisonous gases (DOT 1984, Guide 55).


SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Degraded by acids and alkalis
    (Farm  Chemicals Handbook 1984, p.  C123).

    Hazardous Decomposition or Byproducts:  Not  Found

-------
                                            CAS Registry Number:  24017-47-8
                                            Page 3 of 4
                            TRIAZOFOS
SECTION  IV  --  REACTIVITY DATA   (continued)

    Hazardous Polymerization:   May Occur:   Not  Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Non-Specific -- Organophosphorus
                                  Pesticide) (Hayes 1982,  p.  301)
                      Skin:   Yes  (Non-specific -- Organophosphorus
                              Pesticide) (Hayes 1982, p. 301)
                      Ingestion:  Yes (Encyc Occupat Health and  Safety
                                   1983, p. 1622)

    Health Hazards  (Acute, Delayed,  and Chronic):   This is  an
    organophosphate  pesticide  (Buchel 1983, p. 166).  This  material is  a
    cholinesterase inhibitor and acts on the central nervous system (Buchel
    1983,  pp.  165-166).  Organic phosphorus insecticides are absorbed by  the
    skin as well  as  by the respiratory and gastrointestinal tracts  (Hayes
    1982,  p.  301).

    Signs and Symptoms of Exposure:  This  is an organophosphate pesticide
    (Buchel 1983, p.  166).  Symptoms include headache, giddiness, nervousness,
    blurred vision,  weakness,  nausea, cramps, diarrhea, chest  pain, sweating,
    fixed pinpoint pupils, tearing, salivation, vomiting, muscle  weakness and
    irregular heart  beat (Hayes  1982, p. 301).

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  This is an organophosphate
    pesticide (Buchel  1983, p. 166).  Move victim to fresh air; call emergency
    medical care.  If not breathing, give artificial respiration.  If
    breathing is  difficult, give oxygen.  In case of contact with material,
    immediately flush  skin or  eyes with running water for at least  15
    minutes.   Speed  in removing material from skin is of extreme  importance.
    Remove and isolate contaminated clothing and shoes at the  site.  Keep
    victim quiet  and maintain  normal body temperature.  Effects may be
    delayed;  keep victim under observation (DOT 1984, Guide 55).

-------
                                            CAS Registry Number:  24017-47-8
                                            Page 4 of 4
                            TRIAZOFOS
SECTION  VI  --  USE  INFORMATION

    This material  is  a  pesticide used to control insects, mites,  and nematodes
    (Buchel 1983,  p.  166).  Not registered as a pesticide in the  U.S.  (USEPA/
    Pesticide Index  1985).
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or Spilled)

    Avoid  inhalation and skin contact; wear proper respiratory protection  and
    protective clothing (see Section V above).  This is  an organophosphate
    pesticide (Buchel 1983, p. 166).  Do not touch spilled material;  stop  leak
    if you can do so without risk.  Use water spray to reduce vapors.   Small
    spills:   absorb with sand or other noncombustible absorbent material and
    place  into containers for later disposal.  Small dry spills:   with  clean
    shovel,  place material into clean, dry container and cover; move
    containers from spill area.  Large spills:  dike far ahead of spill for
    later  disposal  (DOT 1984, Guide 55).

-------
                                     CAS Registry Number:   24934-91-6
                                     Page 1 of 3
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- CHLORMEPHOS

CAS Registry Number:  24934-91-6

Synonyms:  (NIOSH/RTECS 1983 Synonyms,  Volume 3,  p.  139)
Phosphorodithioic Acid, S-(Chloromethyl) 0,0-Dimethyl Ester; S-(Chloromethyl)
0,0-Diethyl Phosphorodithioate;  S-Chloromethyl 0,0-Diethyl Phosphoro-
thiolothionate; Dotan; MC 2188

Chemical Formula:   C H12C102PS2

Molecular  Weight:  234.71


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not  Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LDr0 oral (rat)  7
    mg/kg  (*NIOSH/RTECS 1985)


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   178-185°F, 81-85°C at 0.1 mmHg (Worthing 1983)

    Specific  Gravity (H 0=1):  1.260 (Farm  Chemicals Handbook 1984,

    p.  C51)

    Vapor Pressure  (mmHg):   5.6 x 10~3 at 30°C (Worthing  1983)

    Melting Point:   Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility in Water:  Slightly  soluble  (Farm Chemicals  Handbook 1984,
    p.  C51);  60 mg/liter at  20°C (Worthing 1983)

-------
                                      CAS  Registry Number:  24934-91-6
                                      Page 2 of 3
                           CHLORMEPHOS
SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Appearance and  Odor:  Liquid (Farm Chemicals Handbook 1984,  p.  C51);
    colorless  (Worthing 1983)


SECTION  III  -- FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing Methods:   (Non-Specific -- Organophosphorus  Pesticide,
    Liquid, n.o.s.)  This material may  burn, but does not ignite readily.  For
    small  fires,  use dry chemical, carbon dioxide, water spray, or foam.  For
    large  fires,  use water spray,  fog,  or foam  (DOT 1984, Guide 55).

    Special Fire Fighting  Procedures: (Non-Specific -- Organophosphorus
    Pesticide, Liquid, n.o.s.)   Stay  upwind; keep out of low areas.   Move
    container  from fire area if you can do it without risk.  Fight fire  from
    maximum distance.  Dike fire control water  for later disposal; do not
    scatter the material.  Wear positive pressure breathing apparatus and
    special protective clothing (DOT  1984, Guide 55).

    Unusual Fire  and Explosion Hazards:   (Non-Specific  -- Organophosphorus
    Pesticide, Liquid, n.o.s.)   Container may explode in heat of fire.   Fire
    and runoff from control water may produce irritating or poisonous gases
    (DOT 1984, Guide 55).


SECTION  IV  -- REACTIVITY DATA

    Stability:  Unstable:
                 Stable:  Yes (Farm Chemicals Handbook 1984,  p. C51).

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:  May Occur:   Not Found
                               May Not Occur:  Not  Found

        Conditions to Avoid:  Not Found

-------
                                            CAS Registry Number:  24934-91-6
                                            Page 3 of 3

                           CHLORMEPHOS

SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Non-Specific -- Organophosphorus
                                  Pesticide.) (Hayes 1982,  p.  301)
                      Skin:   Yes  (Non-Specific -- Organophosphorus
                              Pesticide) (Hayes 1982, p. 301)
                      Ingestion:  Yes (Non-Specific -- Organophosphorus
                                  Pesticide) (Hayes 1982,  p.  301)

    Health Hazards  (Acute, Delayed,  and Chronic):   (Non-Specific --
    Organophosphorus Pesticide,  Liquid, n.o.s.)  This material  is poisonous;
    it may be fatal  if inhaled,  swallowed, or absorbed through  the  skin (DOT
    1984,  Guide 55).

    Signs and  Symptoms of Exposure:   (Non-Specific -- Parathion)   Symptoms
    may include nausea,  vomiting, abdominal cramps,  diarrhea,  excessive
    salivation, headache,  giddiness, weakness, muscle twitching,  difficult
    breathing,  blurring  or dimness of vision, and loss of muscle
    coordination.  Death may occur from failure of the respiratory  center,
    paralysis of the respiratory muscles, intense bronchoconstriction,  or all
    three (Gosselin  1984,  p. III-340).

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and  First Aid  Procedures:  (Non-Specific -- Organophosphorus
    Pesticide,  Liquid, n.o.s.)   Move victim to fresh air; call  emergency
    medical care.  If not  breathing, give artificial respiration.   If
    breathing is difficult, give oxygen.  In case of contact with material,
    immediately flush skin or  eyes with running water for at least  15
    minutes.   Speed  in removing  material from skin is of extreme  importance.
    Remove and isolate contaminated clothing and shoes at the site.  Keep
    victim quiet and maintain  normal body temperature.   Effects may be
    delayed;  keep victim under observation (DOT 1984, Guide 55).


SECTION  VI  -- USE INFORMATION

    This material is a soil insecticide (Farm Chemicals Handbook  1984,  p. C51).
    Not registered as a  pesticide in the U.S. (USEPA/Pesticide Index 1985).


SECTION  VII  -- PRECAUTIONS  FOR SAFE HANDLING  AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    (Non-Specific -- Organophosphorus Pesticide, Liquid, n.o.s.)   Stay  upwind;
    keep out  of low  areas.  Ventilate closed spaces before entering them.
    Wear positive pressure breathing apparatus and special protective
    clothing.   Remove and  isolate contaminated clothing at the site. Do not
    touch spilled material.  Use water spray to reduce vapors.   Take up small
    spills with sand or  other  noncombustible absorbent material and place in
    containers for later disposal.  Dike far ahead of large spills  for  later
    disposal  (DOT 1984,  Guide  55).

-------
                                           CAS Registry Number:  26419-73-8
                                           Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31. 1985
                                                  Revision:
CHEMICAL IDENTITY --  CARBAMIC  ACID, METHYL-, O-(((2,4-DIMETHYL-1,
3-D«THIOLAN-2-YL)METHYLENE)AMINO)-

CAS Registry  Number:  26419-73-8

Synonyms:  (NIOSH/RTECS 1983 Synonyms, Volume 1, p. 835)  2,4-Dimethyl-
1,3-Dithiolane-2-Carboxaldehyde 0-(Methylcarbamoyl)Oxime; 2,4-Dimethyl-
2-Formyl-l,3-Dithiolane Oxime Methylcarbamate;  l,3-Dithiolane-2-
Carboxaldehyde, 2,4-Dimethyl-, 0-((Methylamino)Carbonyl)Oxime;  1,3-Dithiolane-
2-carboxaldehyde, 2,4-Dimethyl-, O-(Methylcarbamoyl)Oxime;  Ent  27696; MBR 6168;
Tirpate

Chemical Formula:   C H ,N 0 S

Molecular  Weight:  234.36


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity  information:   LD,-0 oral (rat) 1

    ing/kg (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure  (mmHg):  Not Found

    Melting Point:   Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility  in Water:   Not Found

    Appearance and Odor:   Not Found

-------
                                    CAS Registry Number:  26419-73-8
                                    Page 2 of 3
          CARBAMIC ACID,  METHYL-, O-(((2,4-DIMETHYL-1,
               3-DITHIOLAN-2-YL)METHYLENE)AMINO)-
SECTION III -- FIRE AND EXPLOSION  HAZARD DATA

    Flash Point (Method Used):   Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Not Found

    Special  Fire Fighting Procedures:   Not Found

    Unusual Fire and Explosion Hazards:   Not Found


SECTION IV -- REACTIVITY DATA

    Stability:  Unstable:   Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous  Decomposition or Byproducts:  Not  Found

    Hazardous  Polymerization:   May Occur:  Not Found
                              May Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION V -- HEALTH  HAZARD DATA

    Routes  of Entry:  Inhalation:  Not  Found
                     Skin:  Not Found
                     I ngestion:  Not  Found

    Health Hazards  (Acute, Delayed, and Chronic):  Not Found

    Signs and  Symptoms of Exposure:   Not Found

    Medical  Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Not Found

-------
                                    CAS  Registry Number:  26419-73-8
                                    Page 3 of 3
          CARBAMIC ACID, METHYL-, O-(((2,4-DIMETHYL-1,
               3-DITHlOLAN-2-YL)METHYLENE)AMINO)-
SECTION VI -- USE INFORMATION

    Nematocide; product discontinued (Farm Chemicals Handbook 1984, p. C227),
SECTION VII --  PRECAUTIONS  FOR SAFE  HANDLING AND USE
(Steps  to be Taken  in Case Material is Released or Spilled)

    Not Fo*und
COMMENTS

    The following sources were  searched but no information was found:
       Clayton and Clayton 1981-82
       Merck 1983
       Sax 1984
       Verschueren 1983
       Weast 1979
       Hayes 1982
       Hawley 1981

-------
                                      CAS Registry Number:  26628-22-8
                                      Page 3  of 4
                      SODIUM AZIDE (Na(N3))


SECTION  IV -- REACTIVITY DATA  (continued)

    Incompatibility (Materials to Avoid):  Acids (Weiss 1980, p.  811);
    benzoyl chloride and  potassium hydroxide; bromine; carbon disulfide;
    copper; lead;  nitric  acid; barium carbonate; sulfuric acid;  chromium  (II)
    hypochlorite,  dimethyl  sulfate, water, dibromomalononitrile  (Sax 1984,  p.
    2412).   Lead,  silver, copper, mercury (Weiss 1980, p. 811).

    Hazardous  Decomposition or Byproducts:  When heated to decomposition,
    it emits very  toxic fumes of nitrogen oxides (Sax 1984, p.  2412).

    Hazardous  Polymerization:   May Occur:   Not Found
                               May Not Occur:  Yes  (Weiss  1980, p. 811)

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (DASE 1980, p. 827)
                      Skin:   Yes  (Sax 1984, p. 2412)
                      Ingestion:  Yes (Sax 1984,  p.  2412)

    Health Hazards  (Acute, Delayed,  and  Chronic):  Can  cause death by
    affecting the  central  nervous system.  Contact may case burns to skin and
    eyes (*Gosselin  1976).

    Signs and Symptoms of Exposure:  Can  cause death  by affecting the
    central nervous  system.  Contact on skin causes redness and pain.   Contact
    with eyes causes redness,  pain, and blurred vision.   Inhalation or
    ingestion causes dizziness, weakness, blurred vision, slight shortness of
    breath, hypotension, slowed heart rate, abdominal pain and spasms.
    Serious cases  of exposure  may result in convulsions, unconsciousness  and
    death (*Patty  1963; *Gosselin 1976; *USEPA 1977;  Weiss 1980, p.  811;  DASE
    1980,  p.  827).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid  Procedures:  Move victim to fresh air;  call
    emergency medical care.  If not breathing, give artificial respiration.
    If breathing is  difficult, give oxygen.  In case  of contact with material,
    immediately  flush skin or  eyes with running water for at least 15
    minutes.   Speed  in removing material from skin is of extreme importance.
    Remove and isolate contaminated clothing and shoes at the site.   Keep
    victim quiet and maintain  normal body temperature.  Effects may be
    delayed;  keep  victim under observation (DOT 1984, Guide 56).

-------
                                      CAS Registry Number:  26628-22-8
                                      Page 4 of 4
                      SODIUM AZIDE
SECTION  VI  --  USE  INFORMATION

    Air bag inflation; preservative in diagnostic medicinals;  intermediate  in
    explosives manufacturing  (Hawley 1981, p. 933).  Broad-spectrum biocide,
    herbicide, fungicide, nematicide, soil fumigant and insecticide (*Weed
    Science Society of America  1979).  Used in organic synthesis (*USEPA
    1977), water pollution analysis (*Bretherick 1979), and in the chemical
    industry for various manufactured products including sponge rubber  and
    latexes (*Sittig  1981).
SECTION  VII  --  PRECAUTIONS FOR SAFE HANDLING AND  USE
(Steps to be Taken  in  Case Material is Released or Spilled)

    Avoid inhalation of  this material (see Section V above).  In case of
    contact, immediately flush skin or eyes with water for at least 15
    minutes.  Remove and isolate contaminated clothing.   Do  not touch spilled
    material;  stop  leak  if you can do so without risk.  Use  water spray to
    reduce vapors.  Small spills:  absorb with sand or other noncombustible
    absorbent  material and place into containers for later disposal.   Small
    dry spills:   with  clean shovel place material into clean, dry container
    and cover; move containers from spill area.  Large spills:   dike  far ahead
    of spill for  later disposal (DOT 1984, Guide 56).

    If material is  not on fire and not involved in fire, keep sparks, flames,
    and other  sources  of ignition away.  Keep material out of water sources
    and sewers (Student  1981, p. 462).

-------
                                     CAS Registry Number:   26628-22-8
                                     Page 1 of 4
                       EPA  CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- SODIUM AZIDE (Na(N3))

CAS Registry Number:  26628-22-8

Synonyms:  Azide;  Azium; Kazoe; NSC 3072;  Smite; Sodium Azide;  U-3886;
Hydrazoic  Acid, Sodium Salt

Chemical Formula:   N Na

Molecular  Weight:  65.02 (*NIOSH 1985)


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:  TWA Ceiling:  0.1 ppm;  0.3 mg/m3  (ACGIH 1984,  p.  31)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LD,.0 oral (rat,

    mouse) 27  mg/kg  (*NIOSH/RTECS  1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Decomposes in vacuum ("Weast  1979)

    Specific Gravity (H20=l):  1.846 at 20°C (*Weast 1979)

    Vapor Pressure  (mmHg):   Not Found

    Melting Point:   Decomposes at 275°C to sodium and nitrogen (*Weast 1979)

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate (Butyl acetate=l):   Not Found

    Solubility in Water:   42 g in 100 mL at  17°C  (DASE 1980,  p. 827)

    Appearance and Odor:  Colorless hexagonal crystals or  white crystalline
    solid  which is odorless (*Weast 1979; *Patty 1963;  *Weed Science Society
    of America 1979)

-------
                                       CAS Registry Number:  26628-22-8
                                       Page 2 of 4
                      SODIUM AZIDE
SECTION III -- FIRE AND EXPLOSION HAZARD DATA

    Flash Point (Method Used):   Not  flammable  (Weiss 1980, p. 811)
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:   If  material  is on  fire or involved in fire, use
    water in flooding quantities as  fog.   Cool  all affected  containers with
    flooding quantities of water.  Apply  water  from as far a distance as
    possible.   Use  foam, carbon  dioxide or dry  chemical  (Student  1981, p.
    462).  Small fires:  dry chemical,  carbon dioxide, water spray, or foam.
    Large fires: water spray,  fog,  or foam.  Move container from fire area if
    you can do so without risk.   Spray cooling  water on  containers that are
    exposed to flames until well after fire is  out.  For massive  fire in cargo
    area, use unmanned hose holder or  monitor nozzles; if this is impossible,
    withdraw from area and let  fire  burn  (DOT  1984, Guide 56).

    Special  Fire Fighting Procedures:   Personnel protection:  Avoid
    breathing dusts  and fumes from burning material.  Avoid  bodily contact
    with the material.  Wear boots,  protective  gloves and goggles.  Do not
    handle broken packages without protective equipment.  Wash away any
    material which may have contacted  the body  with copious  amounts of water
    or soap and water.  Evacuation:  If fire becomes uncontrollable or
    container is exposed to direct flame,  evacuate for a radius of 2500 feet
    (Student 1981, p. 462).                                           .

    Keep unnecessary people away;  isolate hazard area and deny entry.  Stay
    upwind;  keep out of low areas.   Ventilate closed spaces  before entering.
    Wear positive pressure breathing apparatus  and special protective clothing
    (DOT 1984,  Guide 56).

    Unusual Fire and Explosion  Hazards:   When heated to decomposition,  it
    emits very toxic fumes of nitrogen oxides;  explosive (Sax 1984, p. 2412).
    Forms explosive-sensitive materials with some metals such as  lead, silver,
    mercury or copper.  May form toxic hydrazoic acid fumes  in fire.
    Containers  may explode in fire (Weiss 1980, p. 811).


SECTION IV -- REACTIVITY DATA

    Stability:   Unstable:  Yes (Sax 1984,  p. 2412)
                 Stable:

        Conditions to Avoid:  Acids  (Weiss 1980, p. 811)

-------
                                          CAS Registry Number:  27137-85-5
                                          Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31. 1985
                                                  Revision:
CHEMICAL IDENTITY --  TRICHLORO(DICHLOROPHENYL)SILANE

CAS Registry Number:  27137-85-5

Synonyms:  (NlOSH/RTECS  1983 Synonyms, Volume 3, p. 591)   Silane,
(Dichlorophenyl)Trichloro-; Dichloro Phenyl Trichloro Silane

Chemical Formula:  C,H.ClcSi
                    a j  3

Molecular Weight:  280.43


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LCn   inhalation
                                                       low
    (mouse, mammal)  0.08  mg/liter/2 hours  (-NIOSH/RTECS 1985)


SECTION  II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  500°F, 260°C  (Sax 1984,  p.  962)

    Specific Gravity  (H20=l):  1.562 (Sax 1984, p.  962)

    Vapor Pressure  (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation  Rate  (Butyl  acetate=l):  Not Found

    Solubility in Water:   Not Found

    Appearance and Odor:   Straw colored  liquid with pungent odor (Student
    1981,  p. 187)

-------
                                      CAS Registry Number:  27137-85-5
                                      Page 2 of 4
                  TRICHLORO(DICHLOROPHENYL)SILANE
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  286°F (Sax 1984, p.  962)
    Flammable Limits:  Material will burn but requires some  effort to
    ignite (Student  1981, p.  187).
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  This material may react violently with water.
    Extinguish  with  dry chemical, carbon dioxide,  water spray, fog, or foam
    (DOT 1984,  Guide 60).  Also dry sand may be used (Student  1981, p. 187).

    Special  Fire Fighting  Procedures:  Keep unnecessary people away;
    isolate hazard area and deny entry.  Stay upwind;  keep out of low areas.
    Wear self-contained (positive pressure if available)  breathing apparatus
    and full protective clothing.  Move container  from fire  area if you can do
    so without  risk.  Spray cooling water on containers that are exposed to
    flames until well after fire is out (DOT 1984, Guide 60).  Do not use
    water  on material itself.  Use spray to absorb vapors (Student 1981, p.
    187).

    Unusual  Fire and Explosion Hazards:  This material may burn but  does
    not ignite  readily.  Flammable/poisonous gases may accumulate in tanks and
    hopper cars (DOT 1984, Guide 60).  This material may ignite combustibles
    (wood, paper, oil, etc.).  The compound is a slight fire hazard when
    exposed to  heat  or flame  (Sax 1984, p. 962).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                 Stable:  Not Found                ,

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous  Decomposition  or Byproducts:  It is decomposed by moisture or
    water  to hydrochloric acid with the evolution  of heat (Student 1981, p.
    187).

    Hazardous  Polymerization: May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  27137-85-5
                                      Page 3 of 4
                  TRICHLORO(DICHLOROPHENYL)SILANE
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Sax 1984, p.  962)
                      Skin:   Yes  (Hawley 1981, p. 338)
                      Ingestion:  Not Found

    Health Hazards  (Acute, Delayed,  and  Chronic):  Contact causes burns to
    skin and eyes.   If inhaled,  it may be harmful (DOT 1984,  Guide 60).  Fire
    may produce irritating or  poisonous gases.  The compound  is  highly  toxic
    by inhalation (Sax 1984, p.  962) and is a strong irritant to the skin and
    eyes (Hawley 1981, p.  338).

    Signs and  Symptoms of Exposure:  Not  Found

    Medical  Conditions Generally Aggravated by Exposure:  Not  Found

    Emergency and  First Aid  Procedures:  Move victim to  fresh  air; call
    emergency medical care.  Remove and isolate contaminated  clothing and
    shoes  at the site.   In case  of contact with material,  immediately flush
    skin or eyes with running  water for at least 15 minutes.   Keep victim
    quiet  and maintain normal  body temperature (DOT 1984,  Guide  60).


SECTION  VI -- USE INFORMATION

    Intermediate for silicones (Hawley 1981, p. 338).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    Do not touch spilled material; stop leak if you can do so without risk.
    Small  spills:   absorb  with sand or other combustible absorbent material
    and place into containers  for later disposal.  Large spills:  dike  far
    ahead of spill for later disposal (DOT 1984, Guide 60).   Neutralize
    spilled material with  crushed limestone, soda ash, or  lime.   Keep sparks,
    flames,  and other sources  of ignition away.  Use water spray to knock down
    vapors.   Do not use  water  on material itself.  Avoid breathing vapors.
    Keep upwind.   Wear self-contained breathing apparatus.  Avoid bodily
    contact with the material.  Wear boots,  protective gloves and goggles.  Do
    not handle broken packages without protective equipment  (Student 1981, p.
    187).

-------
                                     CAS Registry Number:  27137-85-5
                                     Page 4 of 4
                 TRICHLORO(DICHLOROPHENYL)SILANE
COMMENT
    Sources  searched but no information  found
        ACGIH  1983
        NIOSH/OSHA 1978
        Weast  1979
        Merck  1983
        NFPA 1984
        Weiss  1980
        CHRIS  1978
        Doull  1980
        Clayton and Clayton 1981-82
        Arena  1979
        Gosselin 1984
        Encyc  Occupat Health and Safety  1983
        Buchel 1983
        Farm Chemicals Handbook 1984
        Hayes  1982
        Physicians' Desk Reference  1985
        Oilman 1985

-------
                                     CAS Registry Number:  28347-13-9
                                     Page  1 of 4
                       EPA  CHEMICAL  PROFILE
                                                   INTERIM
                                                   Date:  October 31, 1985
                                                   Revision:
CHEMICAL IDENTITY -- XYLYLENE DICHLORIDE

CAS Registry Number:   28347-13-9

Synonyms (SANSS 1983 Synonyms):   Benzene, bis(Chloromethyl)-; Xylene,
alpha,alpha-Dichloro-; alpha,alpha'-Dichloroxylene;
bis(Chloromethyl)Benzene; Dichloroxylylene; Xylylene Chloride
(Weast 1980 Synonyms,  p.  C-149)  Benzene, l,2-bis(Chloromethyl)-;
o-Xylylene Chloride; Benzene,  l,3-bis(Chloromethyl)-;  m-Xylylene Chloride;
Benzene,  l,4-bis(Chloromethyl)-;  p-Xylylene Chloride

Chemical Formula:  CQH0C1.  (Weast 1979, p. C-149)
                    o  o L
Molecular  Weight:  175.07 (Weast  1979,  p.  C-149)


SECTION  I -- HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits  Recommended:   Toxicity  information:   LC5_ inhalation
    (rat)  0.2 rag/liter/4 hours (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  o-Isomer:  462-466°F, 239-241°C; m-Isomer:   482-491°F,
    250-255°C; p-Isomer:  464-473°F,  240-245°C  (decomposes)  (Weast 1979, p.
    C-149)

    Specific Gravity (H 0=1):  o-Isomer:   1.393 at  0°C;  m-Isomer:  1.302
    at 20°C;  p-Isomer:   1.417 at  0°C  (Weast 1979, p. C-149)

    Vapor Pressure  (mmHg):  Not  Found

    Melting Point:  o-Isomer:  131°F, 55°C; m-Isomer:   93.6°F, 34.2°C;
    p-Isomer:  212°F, 100°C (Weast 1979, p. C-149)

    Vapor Density (AIR=1):   Not  Found

-------
                                     CAS Registry Number:  28347-13-9
                                     Page 2 of 4
                       XYLYLENE DICHLORIDE


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Evaporation Rate (Butyl acetate=l):  Not  Found

    Solubility in Water:  Insoluble (Weast  1979, p.  C-149)

    Appearance and Odor:  o- and p-Isomers:  crystalline solids (Weast
    1980, p. C-149).


SECTION III -- FIRE AND  EXPLOSION  HAZARD  DATA

    Flash Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing Methods:  Not Found

    Special  Fire Fighting Procedures:   Not Found

    Unusual Fire and Explosion Hazards:   Not Found


SECTION IV -- REACTIVITY DATA

    Stability:  Unstable:   Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:  May Occur:  Not  Found
                              May Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION V -- HEALTH  HAZARD DATA

    Routes  of Entry:  Inhalation:  Not  Found
                     Skin:  Not Found
                     Ingestion:   Not  Found

-------
                                      CAS  Registry Number:  28347-13-9
                                      Page 3 of 4
                        XYLYLENE DICHLORIDE


SECTION  V --  HEALTH HAZARD DATA  (Continued)

    Health Hazards (Acute,  Delayed, and Chronic):   Not Found

    Signs and Symptoms of  Exposure:   Not Found

    Medical Conditions Generally Aggravated by  Exposure:  Not Found

    Emergency  and First Aid Procedures:   (Non-Specific -- Poisonous  Solid,
    n.o.s.)   Move victim to fresh air; call emergency medical  care.  In case
    of contact  with material, immediately  flush  skin or eyes with running
    water for at least 15 minutes.   Remove and isolate contaminated  clothing
    and shoes at the site (DOT 1984, Guide 53).


SECTION  VI  -- USE INFORMATION

    Not Found


SECTION  VII -- PRECAUTIONS FOR SAFE HANDLING  AND USE
(Steps to be  Taken in Case Material  is Released  or Spilled)

    (Non-Specific  --Poisonous Solid, n.o.s.)  Keep unnecessary people away;
    isolate hazard area and deny entry.  Stay upwind; keep out of low  areas.
    Wear self-contained (positive pressure if available) breathing apparatus
    and full  protective clothing. Do not  touch  spilled material; stop leak if
    you can do  so without risk.  Small spills:   absorb with sand or  other
    non-combustible absorbent material and place into containers for later
    disposal.   Large spills:  dike spill for later disposal (DOT 1984, Guide
    53).

-------
                                      CAS  Registry  Number:  28347-13-9
                                      Page 4 of 4
                        XYLYLENE DICHLORIDE
COMMENTS:

    Sources  searched but no information found:
        NIOSH/RTECS 1983
        ACGIH  1983
        NIOSH/OSHA 1978
        Hawley 1981
        Merck  1983
        Sax ,,1984
        NFPA 1984
        Student 1981
        Weiss  1980
        CHRIS  1978
        Doull  1986
        Clayton and Clayton 1981-82
        Arena  1979
        Gosselin 1984
        Buchel  1983
        Farm Chemicals Handbook 1984
        Hayes  1982
        Physicians' Desk Reference 1985
        Oilman  1985

-------
                                     CAS Registry Number:  28772-56-7
                                     Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- BROMADIOLONE

CAS Registry  Number:  28772-56-7

Synonyms (NIOSH/RTECS 1983 Synonyms,  Volume 1,  p.  965):  Coumarin,
3-(3-(4'-Bromo-1,l'-Biphenyl-4-yl)-3-Hydroxy-l-Phenylpropyl)-4-Hydroxy-;
2H-l-Benzopyran-2-one, 3-(3-(4*-Bromo(l,l'-Biphenyl)-4-yl)-3-Hydroxy-l-
Phenylpropyl)-4-Hydroxy-;  Bromadialone; Coumarin,  3-(alpha-(p-(p-Bromophenyl)-
beta-Hydroxyphenethyl)Benzyl)-4-Hydroxy-; Maki;  Ratimus  (Tamogram);
Super-Caid; Super-Rozol; (Farm Chemicals Handbook 1984, p. C-36):  Bromone;
Canadien 2000; Contrac; Termus; Sup'operats

Chemical Formula:   C0.H00BrO.
                    30 23   4

Molecular Weight:  527.44


SECTION  I --  HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not  Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD   oral (rabbit)

    1 mg/kg  (*NIOSH/RTECS 1985)


SECTION  II  -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure  (mmHg):   Not Found

    Melting Point:   392-410°F, 200-210°C (Merck  1983, p.  191)

    Vapor Density (AIR=1):   Not Found

-------
                                      CAS Registry Number:  28772-56-7
                                      Page 2  of 4
                            BROMADIOLONE


SECTION II -- PHYSICAL/CHEMICAL CHARACTERISTICS  (Continued)

    Evaporation Rate (Butyl acetate=l):   Not Found

    Solubility in Water:   Insoluble  (Merck 1983, p. 191)

    Appearance and Odor:   Yellowish powder (Merck 1983,  p.  191)


SECTION III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash Point (Method Used):  Not Found
    Flammable  Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:   (Non-Specific --  Coumarin Derivative Pesticide,
    Solid, n.o.s.)   Small  fires:  dry chemicals,  carbon  dioxide, water spray
    or foam.  Large  fires:   water spray, fog or foam.  Move container from
    fire area if  you can do so without risk.  Fight fire from maximum
    distance.   Dike  fire control water for later disposal;  do not scatter the
    material (DOT  1984, Guide 55).

    Special  Fire Fighting  Procedures:  (Non-specific --  Coumarin Derivative
    Pesticide,  Solid, n.o.s.)  This material may burn but  does not  ignite
    readily.  Container may explode in heat of fire.  Keep unnecessary people
    away; isolate  hazard area and deny entry.   Stay upwind; keep out  of low
    areas.  Ventilate closed spaces before entering them.   Wear positive
    pressure breathing apparatus and special protective  clothing.   Remove and
    isolate contaminated clothing at the site.   If water pollution  occurs,
    notify appropriate authorities  (DOT 1984,  Guide 55).

    Unusual Fire and Explosion Hazards:   (Non-Specific -- Coumarin
    Derivative Pesticide, Solid, n.o.s.)  Fire may produce irritating or
    poisonous  gases.  Runoff from fire control water may give off poisonous
    gases.  Runoff from fire control or dilution water may cause pollution
    (DOT 1984,  Guide 55).


SECTION IV -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not  Found

-------
                                      CAS Registry Number:   28772-56-7
                                      Page 3 of 4
                           BROMADIOLONE
SECTION  IV --  REACTIVITY DATA (Continued)

    Hazardous Decomposition or Byproducts:   When heated  to decomposition,
    it emits toxic  fumes of bromine containing compounds  (Sax  1984, p. 517).

    Hazardous Polymerization:   May Occur:  Not Found
                               May Not Occur:  Not Found

        Conditions  to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Yes (Sax 1984, p. 517)

    Health Hazards  (Acute, Delayed,  and  Chronic):  The compound is toxic
    by  oral exposure  (Sax  1984, p. 517).

    Signs and Symptoms of Exposure:  (Non-Specific -- Coumarin Derivative
    Pesticide, Solid,  n.o.s.)  Contact may cause burns  to  skin  and eyes  (DOT
    1984,  Guide 55).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  (Non-specific  -- Coumarin
    Derivative,  Pesticide,  Solid, n.o.s.)  Move victim  to  fresh air; call
    emergency medical  care.   If not breathing, give artificial  respiration.
    If breathing is  difficult, give oxygen.  In case of contact with material,
    immediately flush  skin  or eyes with running water  for  at  least 15
    minutes.  Speed  in removing material from skin  is of  extreme importance.
    Remove and isolate contaminated clothing and shoes  at  the site.  Keep
    victim quiet and maintain normal body temperature.  Effects may be
    delayed; keep victim under observation (DOT 1984, Guide 55).


SECTION  VI -- USE INFORMATION

    Anticoagulant rodenticide (Merck 1983, p. 191).  It is bait for rodent
    control used against house mice, roof rats, warfarin-resistant Norway
    rats.   It is also  authorized by USDA for use in official  establishments
    operating under  the  Federal meat, poultry, shell egg  grading and egg
    products inspection  program (Farm Chemicals Handbook  1984,  p. C-36).

-------
                                      CAS Registry Number:  28772-56-7
                                      Page 4 of 4
                            BRQMADIOLONE


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING AND  USE
(Steps to be Taken in Case Material is Released or Spilled)

    (Non-Specific --  Coumarin Derivative, Pesticide, Solid,  n.o.s.)   Do not
    touch spilled material;  stop leak if you can do so without risk.   Use
    water spray to reduce vapors.  Small spills:  absorb with sand or other
    non-combustible absorbent material and place into containers for  later
    disposal.   Small  dry spills:  with clean shovel place material into clean,
    dry container and cover; move containers from spill area.  Large  spills:
    dike .far ahead of spill  for  later disposal  (DOT 1984, Guide 55).


COMMENTS:

    Sources searched  but no  information found:
        ACGIH 1983
        NIOSH/OSHA 1978
        Hawley 1981
        Weast 1979
        NFPA 1984
        Student 1981
        Weiss  1980
        Doull  1980
        Clayton and Clayton  1981-82
        Gosselin 1984
        Buchel 1983.
        Hayes  1982
        Gilman 1985

-------
                                    CAS Registry Number:   30674-80-7
                                    Page 1 of 4
                      EPA CHEMICAL PROFILE
                                                 INTERIM
                                                 Date:  October 31,  1985
                                                 Revision:
CHEMICAL  IDENTITY -- METHACRYLOYLOXYETHYL ISOCYANATE

CAS Registry Number:   30674-80-7

Synonyms (NIOSH/RTECS 1983 Synonyms, Volume 2, p. 670):   Methacrylic Acid,
2-Isocyanatoethyl Ester; beta-Isocyanoethyl  Methacrylate;  2-Isocyanatoethyl
Methacrylate; 2-Propenoic Acid,  2-Methyl-,  2-Isocyanatoethyl Ester

Chemical  Formula:  C H NO

Molecular Weight:  155.17


SECTION I  -- HAZARDOUS  INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:   Not Found

    ACGIH  TLV:  Not  Found

    IDLH:  Not  Found

    Other Limits Recommended:  Toxicity information:   LC.Q inhalation
    (rat) 0.15 mg/liter/1 hour (*NIOSH/RTECS 1985)


SECTION II  --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity (H20=l):  Not Found

    Vapor Pressure (mmHg):   Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):   Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:  Not  Found

-------
                                      CAS Registry Number:  30674-80-7
                                      Page 2 of 4
                  METHACRYLOYLOXYETHYL ISOCYANATE
SECTION  III -- FIRE AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable  Limits:
        LEL:   Not Found
        DEL:   Not Found

    Extinguishing Methods:  (Non-Specific --  Isocyanates and solutions,
    n.o.s.  (Flammable, Poisonous))  Small fires:   dry chemical,  carbon
    dioxide, water spray, or foam.  Large fires:   water spray,  fog, or  foam
    (DOT 1984,  Guide 57).

    Special  Fire Fighting  Procedures:  (Non-Specific -- Isocyanates and
    Solutions,  n.o.s.  (Flammable, Poisonous))   Keep unnecessary  people  away;
    isolate hazard area and deny entry.  Stay upwind; keep  out of  low areas.
    Ventilate closed spaces before entering them.   Wear positive pressure
    breathing apparatus and special protective clothing.  Move container from
    fire area if you can do it without risk.   Cool containers that are  exposed
    to flames with water from the side until  well  after fire is  out.  Fight
    fire from maximum distance.  Dike fire control water for later disposal;
    do not  scatter the material (DOT 1984, Guide 57).

    Unusual  Fire and Explosion Hazards:   (Non-Specific --  Isocyanates  and
    Solutions,  n.o.s.  (Flammable, Poisonous))   May be ignited by heat,  sparks,
    or flames.   Container may explode in heat  of fire.   Vapor explosion and
    poison  hazard indoors, outdoors or in sewers.   Runoff from fire control or
    dilution water may cause pollution (DOT 1984,  Guide 57).


SECTION IV -- REACTIVITY DATA

    Stability:   Unstable:  Not Found
                 Stable:   Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):   Not  Found

    Hazardous  Decomposition or Byproducts:   Not  Found

    Hazardous  Polymerization:  May Occur:  Not Found
                               May  Not  Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                      CAS Registry Number:  30674-80-7
                                      Page 3 of 4
                  METHACRYLOYLOXYETHYL ISOCYANATE
SECTION  V -- HEALTH  HAZARD  DATA

    Routes of Entry:  Inhalation:  Yes (Non-Specific --  Isocyanates and
                                  Solutions,  n.o.s.  (Flammable, Poisonous))
                                  (DOT 1984,  Guide 57)
                      Skin:  Yes  (Non-Specific -- Isocyanates  and
                             Solutions,  n.o.s.  (Flammable, Poisonous))
                             (DOT 1984,  Guide 57)
                      Ingest ion:   Yes (Non-Specific --  Isocyanates and
                                  Solutions,  n.o.s.  (Flammable, Poisonous))
                                  (DOT 1984,  Guide 57)

    Health Hazards  (Acute, Delayed,  and  Chronic):   (Non-Specific --
    Isocyanates  and  Solutions, n.o.s. (Flammable,  Poisonous))   Poisonous; may
    be fatal  if  inhaled, swallowed or absorbed through skin.  Contact may
    cause  burns  to skin  and eyes (DOT 1984,  Guide  57).

    Signs  and Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:  (Non-Specific -- Isocyanates)
    Once the  victim  has  been removed from the  contaminated area the treatment
    is symptomatic.  Oxygen may be administered in acute attacks.  The person
    must be kept quiet until respiratory  symptoms  disappear.  When there is
    skin or mucous membrane contact,  the  affected  areas  must be washed
    copiously (Encyc Occupat Health and Safety 1983,  p.  162).


SECTION  VI  --  USE INFORMATION

    Not Found
SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to  be Taken  in Case Material is Released or Spilled)

    (Non-Specific -- Isocyanates and Solutions, n.o.s.  (Flammable,
    Poisonous))  Keep unnecessary people away;  isolate  hazard area and deny
    entry.  Stay upwind; keep out of low areas.  Ventilate closed spaces
    before entering them.  Wear positive pressure breathing apparatus and
    special protective clothing.  Shut off ignition sources; no flares,
    smoking or flames in hazard area.  Do not touch spilled material; stop
    leak if you can do so without risk.  Use water spray  to reduce vapors.
    Small  spills:   absorb with sand or other noncombustible absorbent material
    and place into  containers for later disposal.   Small  dry spills:  with
    clean  shovel place material into clean, dry container and cover; move
    containers from spill area.  Large spills:   dike far  ahead of spill for
    later  disposal  (DOT 1984, Guide 57).

-------
                                     CAS Registry  Number:  30674-80-7
                                     Page 4 of 4
                 METHACRYLOYLOXYETHYL  ISOCYANATE
COMMENTS:

    Sources searched but  no  information found:
       ACGIH 1983
       NIOSH/OSHA 1978
       Hawley 1981
       Weast 1979
       Merck 1983
       Sax 1984
       NFPA 1984
       Student 1981
       Weiss 1980
       CHRIS 1978
       Doull 1980
       Clayton and Clayton  1981-82
       Arena 1979
       Gosselin 1984
       Buchel 1983
       Farm Chemicals  Handbook 1984
       Hayes 1982
       Physicians' Desk  Reference 1985
       Oilman 1985

-------
                                     CAS Registry Number:  39196-18-4
                                     Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date: October  31. 1985
                                                  Revision:
CHEMICAL IDENTITY --  THIOFANOX

CAS Registry  Number:  39196-18-4

Synonyms:  2-Butanone, 3,3-Dimethyl-l-(Methylthio)-,  0-((Methylamino)
Carbonyl)0xime; 3,3-Dimethyl-l-(Methylthio)-2-Butanone 0-((Methylamino)
Carbonyl)0xime; Dacamox;  DS 15647; ENT 27851

Chemical Formula:  C_H10N0O.S
                    y  io 2. /

Molecular  Weight:  218.35


SECTION  I --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LD.   oral  (rat) 8.5

    mg/kg  (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H 0=1):   Not Found

    Vapor Pressure (mmHg):   1.7 x 10~4 at 25°C  (^Worthing 1979)

    Melting Point:  133.7-135.5°F, 56.5-57.5°C (*Worthing 1979)

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

    Solubility  in Water:   5.2 g/liter at 22°C (*Worthing 1979)

    Appearance and Odor:  Thiofanox is a colorless solid with a  pungent
    odor (*Worthing 1979)

-------
                                            CAS Registry Number:  39196-18-4
                                            Page 2 of 3
                            THIOFANOX
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  Not Found
    Flammable Limits:  Non-flammable (Student 1981,  p.  104)
        LEL:  Not Found
        UEL:   Not Found

    Extinguishing Methods:  (Non-Specific  -- Carbamate Pesticide, Solid,
    n.o.s.)   Isolate hazard area and deny entry.   Stay  upwind; keep out of low
    areas.   Ventilate closed spaces before  entering.  Use water spray, fog or
    foam.   Move container  from fire area (only without  risk).  Fight fire from
    maximum distance.  (Dike fire control water for later disposal; do not
    scatter material (DOT  1984, Guide 55).

    Special  Fire Fighting Procedures:  (Non-Specific -.- Carbamate
    Pesticide,  Solid, n.o.s.)  Wear positive pressure breathing apparatus and
    special protective clothing (DOT 1984,  Guide  55).

    Unusual Fire and Explosion Hazards:   (Non-Specific --  Carbamate
    Pesticide,  Solid, n.o.s.)  Container may explode in heat of fire (DOT
    1984,  Guide 55).


SECTION  IV --  REACTIVITY DATA

    Stability:   Unstable:
                 Stable:  Stable at normal  storage temperature; reasonably
    stable to hydrolysis at less than 30°C  at pH  5-9 ('^Worthing 1979)

        Conditions to Avoid:  Not Found

    Incompatibility  (Materials to Avoid): Not Found

    Hazardous  Decomposition or Byproducts:  When heated to decomposition,
    it emits very toxic  fumes of nitrogen and sulfur oxides  (Sax  1984, p.  852).

    Hazardous  Polymerization:  May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found
SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Yes (Student 1981,  p.  104)
                      Skin:  Yes (Student 1981, p.  104)
                      Ingestion:  Yes (Student 1981,  p.  104)

-------
                                            CAS Registry Number:   39196-18-4
                                            Page 3 of 3
                            THIOFANOX
SECTION  V -- HEALTH  HAZARD  DATA (Continued)

    Health Hazards (Acute, Delayed,  and Chronic):  This material is a
    carbamate pesticide  (Buchel 1983, p. 134).   Carbamate  pesticides are
    moderately to  highly toxic (Sax 1984, p.  631).   It  is  a  cholinesterase
    inhibitor (Gosselin  1984, p. 111-86).

    Signs and Symptoms of Exposure:   Symptoms include nausea,  vomiting,
    abdominal cramps, diarrhea, excessive salivation, sweating, weakness,
    runny nose,  tightness  of chest (inhalation exposure),  blurred vision,
    tearing,  muscle spasm,  loss of eye coordination,  ocular  pain, extreme
    dilation  of  the pupil,  loss of muscle coordination,  slurring of speech,
    difficulty in  breathing, excessive respiratory tract mucous, lung fluid
    buildup,  skin  discoloration, and hypertension (*Gosselin 1976).

    Medical Conditions Generally Aggravated  by Exposure:   Not Found

    Emergency and First Aid  Procedures:  Establish clear airway and
    administer oxygen if necessary.  Bathe and shampoo  victim if skin and hair
    are contaminated.  If  ingested, stomach must be emptied;  give syrup of
    ipecac to induce vomiting (^Morgan 1976).


SECTION  VI  --  USE INFORMATION

    Systemic  insecticide and acaricide (^Worthing 1979)


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING AND USE
(Steps to be  Taken in Case Material is Released or Spilled)

    (Non-Specific  -- Carbamate Pesticide, Solid, n.o.s.)  Do not touch spilled
    material;  stop leak  (only without risk).   Wear self-contained (positive
    pressure)  breathing  apparatus and full protective clothing.  Use water
    spray to  reduce vapors.  Small spills:  absorb with sand or other
    noncombustible absorbent material and place into containers for later
    disposal.   Large spills:  dike far ahead of spill for  later disposal (DOT
    1981,  Guide  55).

-------
                                           CAS Registry Number:   50782-69-9
                                           Page  1  of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31, 1985
                                                  Revision:
CHEMICAL IDENTITY --  PHOSPHONOTHIOIC ACID, METHYL-,  S-(2-(BIS
(1-METHYLETHYL)AMINO)ETHYL) O-ETHYL ESTER

CAS Registry  Number:  50782-69-9

Synonyms: • Phosphonothioic Acid, Methyl-, S-(2-(Diisopropylamino)Ethyl)
0-Ethyl Ester; S-(2-Diisopropylaminoethyl) 0-Ethyl Methylphosphonothiolate;
Ethyl-S-Diisopropylaminoethyl Methylthiophosphonate; Ethyl S-Dimethylamino-
ethyl Methylphosphonothiolate; VX

Chemical Formula:   C^H.-NO-PS
                    11 2b  
-------
                                     CAS  Registry Number:  50782-69-9
                                     Page 2 of 3
             PHOSPHONOTHIOIC ACID, METHYL-, S-(2-(BIS
             (1-METHYLETHYL)AMINO)ETHYL) O-ETHYL ESTER
SECTION  II --  PHYSICAL/CHEMICAL  CHARACTERISTICS  (Continued)

    Solubility in Water:   Not Found

    Appearance and Odor:  Odorless liquid (Merck 1983, p.  1440) with an
    amber  color (U.S.  Army  1975, p. 3-5)


SECTION  III -- FIRE  AND  EXPLOSION HAZARD DATA

    Flash  Point (Method Used):  159°C  (U.S. Army 1975, p.  3-5)
    Flammable  Limits:
        LEL:   Not  Found
        UEL:   Not  Found

    Extinguishing Methods:  Not Found

    Special Fire Fighting Procedures:   Use  protective clothing  and
    respiratory protection  (U.S. Army 1975, p.  3-5)

    Unusual Fire and  Explosion Hazards:   Not Found


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:
                Stable:  Yes (U.S. Army  1975, p. 3-5)

        Conditions  to  Avoid:  Extreme heat  (Sax 1984, p. 1335)

    Incompatibility  (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Highly toxic nitrogen oxides
    and sulfur oxides  (Sax  1984, p. 1335)

    Hazardous Polymerization:   May Occur:   Not Found
                              May Not  Occur: Not  Found

        Conditions  to  Avoid:  Not Found


SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:   Yes (U.S. Army 1975, p. 3-5)
                     Skin:  Yes  (Sax 1984,  p.  1335)
                     Ingestion:   Yes  (U.S. Army 1975,  p. 3-5)

-------
                                      CAS  Registry Number:  50782-69-9
                                      Page 3 of 3
              PHOSPHONOTHIOIC ACID, METHYL-,  S-(2-(BIS
              (1-METHYLETHYL)AMINO)ETHYL) O-ETHYL ESTER
SECTION  V -- HEALTH  HAZARD DATA (Continued)

    Health Hazards (Acute,  Delayed, and Chronic):   Cholinesterase inhibitor
    (Merck 1983, p. 1440).  Lowest toxic oral dose  (TDLO) to humans  is  4
    mg/kg; lowest  lethal skin dose to  humans  (LDLO) is 86 Vg/kg (NIOSH/RTECS
    1983,  p.  124).  Death within 15 minutes after fatal dose is absorbed  (U.S.
    Army 1975,  p.  3-5).

    Signs and Symptoms of  Exposure:   Exposure may produce red blood cell
    and central nervous system effects (Sax 1984, p. 1335).  Other symptoms
    include difficulty in breathing, drooling,  excessive sweating, nausea,
    vomiting,  cramps, involuntary defecation and urination, twitching,
    jerking,  staggering, headache,  confusion, drowsiness, coma, convulsions,
    dimness of vision and pinpoint pupils  (U.S. Army 1975, p.  3-5).

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:  Immediate decontamination of the
    smallest  drop  is essential (U.S. Army  1975, p.  3-5).


SECTION  VI  -- USE INFORMATION

    Quick-acting military chemical nerve agent  (U.S. Army 1975, p. 3-5).
SECTION  VII -- PRECAUTIONS FOR SAFE  HANDLING AND  USE
(Steps to  be Taken in Case Material is  Released or Spilled)

    Protective mask with self-contained breathing apparatus  and full
    protective clothing.  Decontaminants include bleach slurry and hot soapy
    water  (U.S. Army 1975, p. 3-5).
COMMENTS

    Sources  searched, no information found
        DOT  1984
        Hayes  1982
        Hawley 1981
        Weast  1979

-------
                                           CAS  Registry Number:  53558-25-1
                                           Page 1 of 4
                       EPA CHEMICAL PROFILE
                                                   INTERIM
                                                   Date: October 31,  1985
                                                   Revision:
CHEMICAL IDENTITY -- PYRIMINIL

CAS Registry  Number:  53558-25-1

Synonyms (NIOSH/RTECS 1983 Synonyms,  Volume 3,  p.  887):  Urea,
l-Nitrophenyl-3-(3-Pyridylmethyl)-; DLP-87; DLP 787;  N-(4-Nitrophenyl)-N'-(3-
Pyridinylmethyl)Urea; N-3-Pyridylmethyl-N1-p-Nitrophenylurea; Pyriminyl;
RH-787;  VACOR; Urea, N-(4-Nitrophenyl)-N'-(3-Pyridinylmethyl)-

Chemical Formula:   Gi3Hi2N4°3

Molecular Weight:  272.29


SECTION  I -- HAZARDOUS  INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:  Not Found

    ACGIH TLV:   Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LD,   oral (man)

    22.3 mg/kg (*NIOSH/RTECS 1985)


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:   Not Found

    Specific Gravity (H_0=l):  Not Found

    Vapor Pressure  (mmHg):   Not Found

    Melting Point:   Decomposes at 433°F, 223°C  (Hayes 1982, p.  503)

    Vapor Density (AIR=1):   Not Found

    Evaporation  Rate (Butyl acetate=l):  Not Found

    Solubility  in Water:   Not Found

    Appearance and Odor:  Yellow, resembling corn meal  (Arena 1979,  p.  174)

-------
                                      CAS Registry Number:   53558-25-1
                                      Page 2 of 4
                            PYRIMINIL
SECTION  III -- FIRE AND EXPLOSION HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:  Not Found
        DEL:   Not Found

    Extinguishing Methods:  This compound is  a  solid pesticide (Buchel
    1983,  p.  226).   Small fires:  dry chemical,  carbon  dioxide, water spray,
    or foam.-  Large  fires:  water spray,  fog,  or foam.  Move container from
    fire area if you can do so without risk.   Fight  fire  from maximum
    distance.   Dike  fire control water for later disposal; do not scatter the
    material (DOT 1984, Guide 55).

    Special Fire Fighting  Procedures:  This compound is a solid pesticide
    (Buchel  1983,  p. 226).  Keep unnecessary people  away; isolate hazard area
    and deny entry.  Stay upwind; keep out of  low areas.  Ventilate closed
    spaces before entering them.  Wear positive  pressure  breathing apparatus
    and special protective clothing.  Remove and isolate  contaminated clothing
    at the site (DOT 1984, Guide 55).

    Unusual Fire and Explosion Hazards:  Not Found
SECTION  IV  --  REACTIVITY DATA

    Stability:  Unstable:  Not Found
                 Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:   Not  Found

    Hazardous Polymerization:  May Occur:   Not Found
                               May  Not Occur:  Not Found

        Conditions to Avoid:  Not Found


SECTION  V -- HEALTH  HAZARD DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Yes (Arena 1979, p. 175)

-------
                                      CAS Registry Number:  53558-25-1
                                      Page 3 of 4
                             PYRIMINIL
SECTION  V -- HEALTH HAZARD DATA (Continued)

    Health Hazards (Acute, Delayed, and Chronic):  This  chemical may  cause
    death by cardiovascular  collapse and respiratory failure (Arena 1979,  p.
    175).   It may cause diabetes.   Also it affects the central nervous system
    (Hayes 1982,  p. 504).  Human survivors regularly develop an insulin-
    deficient, ketosis-prone form of diabetes millitus (Gosselin 1984, p.
    11-351).

    Signs and  Symptoms of Exposure:   Symptoms  include  nausea, vomiting,
    abdominal pains,  chills,  mental confusion, anorexia,  aching, dilated
    pupils,  dehydration, chest pain, urinary retention, irregular heartbeat,
    and muscular  weakness  (Arena 1979, p. 175).  Exposure may also result  in
    visual disturbances, central nervous system depression and tremors
    (Gosselin 1984, p.  11-351).

    Medical  Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid Procedures:  This compound is a solid pesticide
    (Buchel 1983, p.  226).   Move victim to fresh air; call emergency medical
    care.   If not breathing,  give artificial respiration.  If breathing is
    difficult, give oxygen.   In  case of contact with material, immediately
    flush skin or eyes  with  running water for at least 15 minutes.   Speed in
    removing material from skin  is  of extreme importance.  Remove and isolate
    contaminated  clothing  and shoes at the site.  Keep victim quiet and
    maintain normal body temperature.  Effects may be delayed; keep victim
    under observation (DOT 1984, Guide 55).


SECTION  VI -- USE  INFORMATION

    Single-dose,  acute  rodenticide  (Farm Chemicals Handbook 1984, p. C-238).
    Not registered as a pesticide in the U.S. (USEPA/Pesticide Index 1985).


SECTION  VII  --  PRECAUTIONS  FOR SAFE HANDLING  AND USE
(Steps to be Taken in Case Material is Released or Spilled)

    This compound is  a  solid pesticide  (Buchel 1983, p. 226).   Keep
    unnecessary people  away;  isolate hazard area and deny entry.  Stay upwind;
    keep out of low areas.   Ventilate closed spaces before entering them.
    Wear positive pressure breathing apparatus and special protective
    clothing.   Remove and  isolate contaminated^-clothing at the site.  Do not
    touch spilled material;  stop leak if you can do so without risk.  Use
    water spray to reduce  vapors.  Small spills:  absorb with sand or other
    noncombustible absorbent material and place into containers for later
    disposal.   Small  dry spills: with clean shovel place material into clean,
    dry container and cover;  move containers from spill area.  Large spills:
    dike far ahead of spill  for  later disposal (DOT 1984, Guide 55).

-------
                                      CAS Registry Number:  53558-25-1
                                      Page 4 of 4
                            PYRIMINIL
COMMENTS:

    Sources searched but no information found:
        ACGIH 1983
        NIOSH/OSHA  1978
        Hawley 1981
        Weast 1979
        Merck 1983
        Sax 1984
        NFPA 1984
        Student 1981
        Weiss 1980
        CHRIS 1978
        Doull 1980
        Clayton and Clayton 1981-82
        Encyc Occupat Health and Safety 1983
        Physicians' Desk Reference 1985
        Oilman 1985

-------
                                          CAS Registry Number:  58270-08-9
                                          Page  1 of 3
                      EPA CHEMICAL PROFILE
                                                 INTERIM
                                                 Date:  October 31, 1985
                                                 Revision:
CHEMICAL  IDENTITY -- ZINC, DICHLORO(4,4-DIMETHYL-5((((METHYLAMINO)
CARBONYL)OXY)IMINO)PENTANENITRILE)-, (T-4)-

CAS Registry Number:   58270-08-9

Synonyms:  Not Found

Chemical  Formula: C9H15Cl2N302Zn  (*NIOSH/RTECS 1985)

Molecular Weight:   334  (*NIOSH/RTECS 1985)


SECTION I  -- HAZARDOUS INGREDIENTS/IDENTITY  INFORMATION

    OSHA PEL:   Not Found

    ACGIH  TLV:  Not Found

    IDLH:  Not  Found

    Other Limits Recommended:  Toxicity information:  LD  oral (rat)  9
    mg/kg (*NIOSH/RTECS  1985)


SECTION II --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling  Point:  Not Found

    Specific Gravity (H 0=1):  Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density  (AIR=1):  Not Found

    Evaporation Rate (Butyl  acetate=l):   Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:  Not Found

-------
                                     CAS  Registry Number:  58270-08-9
                                     Page 2 of 3
           ZINC,  DICHLORO(4,4-DIMETHYI_-5((((METHYLAMINO)
            CARBONYL)OXY)IMINO)PENTANENITRILE)-, (T-4)-
SECTION III  -- FIRE  AND  EXPLOSION HAZARD DATA

    Flash Point (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not  Found
        UEL:   Not  Found

    Extinguishing Methods:  Not Found

    Special  Fire Fighting Procedures:  Not Found

    Unusual Fire and  Explosion Hazards:  Not Found


SECTION IV  -- REACTIVITY DATA

    Stability:  Unstable:   Not  Found
                Stable:  Not Found

        Conditions to  Avoid:   Not Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or Byproducts:  Not Found

    Hazardous Polymerization:   May Occur:  Not Found
                              May Not Occur:  Not  Found

        Conditions to  Avoid:   Not Found


SECTION V -- HEALTH  HAZARD DATA

    Routes  of Entry:  Inhalation:  Not Found
                     Skin:   Not Found
                      Ingestion:   Not Found

    Health Hazards (Acute, Delayed,  and Chronic): Not Found

    Signs and Symptoms of Exposure:  Not Found

    Medical Conditions Generally Aggravated by Exposure:   Not Found

    Emergency and First Aid Procedures:  Not  Found

-------
                                    CAS Registry Number:  58270-08-9
                                    Page 3 of 3
           ZINC,  DICHLORO(4,4-DIMETHYL-5((((METHYLAMINO)
            CARBONYL)OXY)IMINO)PENTANENITRILE)-,  (T-4)-
SECTION VI -- USE  INFORMATION

    Not Found
SECTION VII --  PRECAUTIONS FOR  SAFE HANDLING AND USE
(Steps  to be Taken in Case Material is Released or Spilled)

    Not Found
COMMENTS

    Sources searched but no information found:
       ACGIH 1983
       NIOSH/OSHA 1978
       Hawley 1981
       Weast 1979
       Merck 1983
       Sax 1984
       DOT 1984
       NFPA 1984
       Student 1981
       Weiss 1980
       CHRIS 1978
       Doull 1980
       Clayton and Clayton 1981-82
       Arena 1979
       Gosselin 1984
       Encyc Occupat Health and Safety 1983
       Buchel 1983
       Farm Chemicals Handbook 1984
       Hayes 1982
       Physicians' Desk Reference 1985
       Oilman 1985
       NIOSH/RTECS 1983

-------
                                    CAS Registry Number:  62207-76-5
                                    Page 1 of 3
                       EPA CHEMICAL  PROFILE
                                                  INTERIM
                                                  Date: October 9,  1985
                                                  Revision:
CHEMICAL  IDENTITY -- COBALT, ((2,2'-(1,2-ETHANEDIYLBIS
(NITRILOMETHYLIDYNE))BIS(6-FLUOROPHENOLATO))(2-)-N,N',O,O')-,
(SP-4-2)

CAS Registry Number:  62207-76-5

Synonyms:   (NIOSH/RTECS 1983 Synonyms, Volume 1,  p.  950)  Cobalt (II),
N,N'-Ethylenebis(3-Fluorosalicylideneiminato)-;  Cobalt,
Bis(3-Fluorosalicylaldehyde)Ethylenediimine-; N,N'-Ethylenebis(3-Fluorosali-
cylideneiminato)Cobalt II; Fluomine;  Fluomine Dust

Chemical Formula:  Cn,H,0CoF_N000
                    ID Iz   2.  2.  2.
Molecular Weight:   361.23


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not  Found

    ACGIH  TLV:  Not Found

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:  LC,   inhalation
                                                      low
    (guinea pig) 0.03 mg/liter/2 hours  (*NIOSH/RTECS 1985)


SECTION II  --  PHYSICAL/CHEMICAL CHARACTERISTICS

    Boiling Point:  Not Found

    Specific Gravity  (H 0=1):   Not Found

    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate  (Butyl  acetate=l):  Not Found

    Solubility in Water:  Not Found

    Appearance and Odor:  Not Found

-------
                                     CAS Registry Number:  62207-76-5
                                     Page 2 of 3
                 COBALT,  ((2,2'-(1,2-ETHANEDIYLBIS
    (NITRILOMETHYLIDYNE))BIS(6-FLUOROPHENOLATO))(2-)-N,N',O,0')-,
                             (SP-4-2)
SECTION III  -- FIRE AND EXPLOSION HAZARD DATA

    Flash Point (Method Used):  Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:   Not Found

    Extinguishing Methods:  Not Found

    Special Fire Fighting Procedures:  Not Found

    Unusual Fire  and Explosion Hazards:  When heated to  decomposition,  it
    emits very toxic fumes of  fluorine containing  compounds and nitrogen
    oxides  (Sax 1984, p. 1339).


SECTION IV  -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:   Not  Found

    Incompatibility (Materials  to Avoid):   Not Found

    Hazardous Decomposition  or Byproducts:   When heated to decomposition,
    it  emits  very toxic fumes  of fluorine containing  compounds and nitrogen
    oxides  (Sax 1984, p. 1339).

    Hazardous Polymerization:  May Occur:   Not Found
                              May Not  Occur:  Not  Found

        Conditions to Avoid:   Not  Found
SECTION V  -- HEALTH HAZARD DATA

    Routes of Entry:   Inhalation:  Yes (Sax 1984,  p.  1339)
                      Skin:   Not Found
                      Ingestion:  Yes (Sax 1984,  p.  1339)

    Health Hazards  (Acute, Delayed,  and  Chronic):  This material is highly
    toxic by oral ingestin or  inhalation (Sax 1984, p.  1339).

    Signs  and  Symptoms of Exposure:  Not Found

-------
                                     CAS  Registry Number:   62207-76-5
                                     Page 3 of 3
                 COBALT,  ((2,2'-(1,2-ETHANEDIYLBIS
    (NITRILOMETHYLIDYNE))BIS(6-FLUOROPHENOLATO))(2-)-N,N',0,0')-,
                            (SP-4-2)
SECTION V  -- HEALTH HAZARD DATA (Continued)

    Medical Conditions  Generally Aggravated by Exposure:  Not Found

    Emergency and  First Aid Procedures:  Not Found


SECTION VI -- USE INFORMATION

    Not Found
SECTION VII -- PRECAUTIONS FOR SAFE  HANDLING AND USE
(Steps  to be Taken in Case Material is Released or Spilled)

    Avoid inhalation.  Wear proper respiratory protection (see  Section V
    above).
COMMENTS:

    Sources searched but  no information found:
       ACGIH 1983
       NIOSH/OSHA 1978
       Hawley 1981
       Weast 1979
       Merck 1983
       DOT 1984
       NFPA 1984
       Student 1981
       Weiss 1980
       CHRIS 1978
       Doull 1980
       Clayton and Clayton 1981-82
       Arena 1979
       Gosselin 1984
       Encyc Occupat Health and Safety 1983
       Buchel 1983
       Farm Chemicals Handbook 1984
       Hayes 1982
       Physicians' Desk  Reference 1985
       Oilman 1985

-------
                                   CAS  Registry Number:  Not Found
                                   Premanufacture Notice Number:   PMN-82-147
                                   Page 1 of 3
                       EPA CHEMICAL PROFILE
                                                  INTERIM
                                                  Date:  October 31. 1985
                                                  Revision:
CHEMICAL  IDENTITY --  GENERIC NAME:   ORGANORHODIUM COMPLEX

    (This chemical was identified from a Premanufacture Review Notice (PMN)
    submitted to EPA.  The submitter has claimed certain information on the
    submission to be confidential, including specific chemical identify,
    chemical formula, and molecular weight.)

CAS Registry Number:  Not  Found

Synonyms:   Not Found

Chemical  Formula:   Not Found

Molecular Weight:   Not Found


SECTION I  --  HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

    OSHA PEL:  Not Found

    ACGIH  TLV:  TWA 1 mg  (Rhodium)/m3 (Insoluble Rhodium Compounds)
    (ACGIH  1984, p.  29)

    IDLH:  Not Found

    Other Limits Recommended:  Toxicity information:   LC   inhalation

    (rat) 0.08 mg/liter (submitter's estimate)  (PMN-82-147)


SECTION II --  PHYSICAL/CHEMICAL  CHARACTERISTICS

    Boiling  Point:   Not Found
    Specific Gravity  (H 0=1):  Not  Found
    Vapor Pressure (mmHg):  Not Found

    Melting Point:  Not Found

    Vapor Density (AIR=1):  Not Found

    Evaporation Rate (Butyl acetate=l):  Not Found

-------
                                   CAS Registry Number:  Not Found
                                   Premanufacture  Notice Number:  PMN-82-147
                                   Page 2 of 3
              GENERIC NAME:  ORGANORHODIUM COMPLEX


SECTION  II -- PHYSICAL/CHEMICAL CHARACTERISTICS (Continued)

    Solubility  in Water:  Insoluble  (PMN-82-147)

    Appearance and Odor:   Green crystals (PMN-82-147)


SECTION  III  -- FIRE AND EXPLOSION  HAZARD DATA

    Flash  Point (Method Used):   Not Found
    Flammable Limits:
        LEL:   Not Found
        UEL:  Not Found

    Extinguishing  Methods:   (Non-Specific -- Poisonous Solid, n.o.s.)
    Small  fires:   dry chemical,  carbon  dioxide, water spray, or foam.  Large
    fires:  water  spray, fog or  foam.   Move container from  fire area if you
    can do it  without risk (DOT  1984, Guide 53).

    Special Fire Fighting Procedures:   (Non-Specific -- Poisonous Solid,
    n.o.s.)  Stay  upwind;  keep out  of low areas.   Wear self-contained
    (positive  pressure if  available) breathing apparatus and full protective
    clothing  (DOT  1984, Guide 53).

    Unusual Fire  and Explosion  Hazards:   (Non-Specific --  Poisonous Solid,
    n.o.s.)  Fire  may produce irritating or poisonous gases (DOT 1984,  Guide
    53).


SECTION  IV -- REACTIVITY DATA

    Stability:  Unstable:  Not Found
                Stable:  Not Found

        Conditions to Avoid:  Not Found

    Incompatibility (Materials  to Avoid):  Not Found

    Hazardous Decomposition or  Byproducts:   Not  Found

    Hazardous Polymerization:  May Occur:   Not Found
                               May Not Occur:  Not Found

        Conditions to Avoid:  Not Found

-------
                                  CAS Registry Number:   Not Found
                                  Premanufacture Notice Number:   PMN-82-147
                                  Page 3 of 3
              GENERIC NAME:  ORGANORHODIUM COMPLEX
SECTION  V -- HEALTH HAZARD DATA

    Routes of Entry:  Inhalation:  Not Found
                      Skin:  Not Found
                      Ingestion:   Not Found

    Health Hazards (Acute,  Delayed,  and Chronic):  (Non-Specific  --
    Organometals)  Organometals may be highly toxic orally.  They are
    irritating to  skin, eyes, and mucous  membranes.  They can damage lung
    tissue and the liver (Sax 1984, p. 2095).

    Signs and Symptoms of  Exposure:  Not Found

    Medical Conditions Generally Aggravated by Exposure:  Not Found

    Emergency and First Aid  Procedures:   (Non-Specific -- Poisonous Solid,
    n.o.s.)   Move  victim to fresh air; call  emergency medical care.   Remove
    and isolate  contaminated clothing and shoes  at the site.  In case of
    contact with material, immediately flush skin or eyes with running water
    for at least 15 minutes (DOT 1984, Guide 55).


SECTION  VI  --  USE INFORMATION

    Catalyst  (PMN-82-147).


SECTION  VII  -- PRECAUTIONS FOR SAFE HANDLING  AND USE
(Steps to be  Taken in Case Material is Released  or Spilled)

    (Non-Specific  -- Poisonous Solid, n.o.s.)  Keep unnecessary people away;
    isolate hazard area and deny entry.  Stay  upwind; keep out of low areas.
    Wear self-contained (positive pressure if  available) breathing apparatus
    and full  protective clothing.   Do not touch  spilled material;  stop leak  if
    you can do it  without risk.  Small spills:   take up with sand or other
    non-combustible absorbent material and place into containers for later
    disposal.   Small dry spills:  with clean shovel place material into clean,
    dry container  and cover; move containers from spill area.  Large spills:
    dike far  ahead of spill for later disposal (DOT 1984, Guide 53).

-------