United States
Environmental Protection
Agency
Office of Emergency and
Remedial Response
Washington, DC 20460
EPA-540-R-99-011
9285.9-31D
PB99-963225
June 1999
Superfund
Environmental Response
Training Program
Schedule of Courses
September 27, 1999 - September 29, 2000
-------
ENVIRONMENTAL RESPONSE TRAINING PROGRAM
The Office of Emergency and Remedial Response (OERR) is responsible for the U.S. Environmental Protection
Agency's (EPA) program for protecting the public and the environment from releases or potential releases of
hazardous materials. Releases can result from accidents and discharges at facilities where chemicals are handled
or disposed of. Releases of hazardous materials may require an immediate response by government officials
to control the incident. In addition, extensive investigation and restoration actions that extend over a long period
of time may be required.
As part of EPA's comprehensive program for protecting the public and the environment from hazardous
materials, the Emergency Response Division of OERR has developed the Environmental Response Training
Program (ERTP). The courses in this program are designed for personnel who respond to emergencies or who
investigate and clean up abandoned hazardous waste sites. Training is provided in safety and health as well as
in the various technical operations needed to identify, evaluate, and control hazardous substances that have been
released.
The courses developed by EPA's Environmental Response Team, and presented by contract personnel, last from
1-5 days. These courses emphasize the practical application of lecture material through problem-solving
sessions, case studies, demonstrations, and exercises using field instruments. Participants are provided with
fundamental information about the subject of the course. Complemented by work experience and individual
effort, the courses provide a foundation upon which individuals can further refine and develop their own
knowledge and skills in a variety of response activities.
Project Officer:
Bruce Potoka
Environmental Response Training Program
U.S. Environmental Protection Agency
26 W. Martin Burner King Drive (B-3)
Cincinnati, OH 45268
513 569-7537
-------
CONTENTS
REGISTRATION INFORMATION 1
Applying for Courses 1
Course Locations 2
Class Attendance 2
Tuition 2
Credit for Attending Courses 3
COURSE DESCRIPTIONS
Environmental Remediation Technologies (165.3) 5
Air Monitoring for Hazardous Materials (165.4) 7
Hazardous Materials Incident Response Operations (165.5) 9
Risk Assessment Guidance for Superfund (165.6) 11
Introduction to Groundwater Investigations (165.7) 13
Safety and Health Decision-Making for Managers (165.8) 15
Sampling for Hazardous Materials (165.9) 17
Radiation Safety at Superfund Sites (165.11) 19
t
Emergency Response to Hazardous Material Incidents (165.15) 21
Designs for Air Impact Assessments at Hazardous Waste Sites (165.16) 23
Removal Cost Management System (165.17) 24
Inland Oil Spills (165.18) 25
Chemical Accident Prevention Auditing (165.19) 27
Introduction to Environmental Geophysics (165.20) 29
Chemistry for Environmental Professionals (165.21) 31
in
-------
COURSE DESCRIPTIONS (cont.)
Introductory Preliminary Assessment Training 33
Introductory Site Inspection Training 35
SCHEDULED COURSES
Region 1 37
Region 2 39
Region 3 41
Region 4 43
Region 5 45
Region 6 47
Region 7 49
Region 8 51
Region 9 53
Region 10 55
ERTP Training Facility, Cincinnati, Ohio 57
ERTP Training Facility, Edison, New Jersey 59
EXTERNAL TRAINING PROGRAMS 61
Approved External Providers 63
External Providers With Interim Approval 67
APPLICATION FOR TRAINING FORMS 69
IV
-------
REGISTRATION INFORMATION
Applying for Courses
Application to attend any of the ERTP training courses should be made as early as possible. Applicants should
read the course description to determine whether it fits their needs and whether there are any prerequisites for
the course. An "Application for Training" form must be completed in its entirety; letters only will not suffice
for course registration. Applications to attend or inquiries concerning the availability of space in ERTP courses
should be directed to:
Training Registrar
U.S. EPA Environmental Response Training Program
1930 Radcliff Drive
Cincinnati, OH 45204
Tel: 513 251-7776 or 513 251-7669 (8:00 a.m. to 5:00 p.m. Eastern time)
Fax: 513251-4137
e-mail: embryk@ttnus.com
Registration for courses being held in EPA Regions 1 and 6 is handled by the Regional Training Coordinators.
Applications and requests for information concerning courses being held in those regions should be sent directly
to the Regional Training Coordinator:
Region 1:
Pauline Callahan
U.S. EPA Region 1
1 Congress Street
Suite 1100 (MHR)
Boston, MA 02114-2023
Tel: 617918-1192
Fax: 617918-1183
e-mail: callahan.pauline@epa.gov
Region 6:
Keith Reddick
U.S. EPA Region 6
1445 Ross Avenue
Suite 1200, 10th Floor
Dallas, TX 75202-2733
Tel: 214 665-8338
Fax: 214 665-7447
e-mail: reddick.keith@epa.gov
The selection of students for EPA courses is made 6 weeks prior to the starting date of the course. Make
sure applications are either faxed or mailed to the Training Registrar's office prior to the date the selections are
made so they will be included in the pool of applications. After the selections are made, students who are
accepted into a class will receive an acceptance letter and information relative to attending the course. Students
who are not selected will receive a notification letter and can notify the Training Registrar if they would like
to be placed on a waiting list for the course.
Employees from EPA, other federal agencies, state and local government are given first priority to attend ERTP
courses. Applications from private sector employees are considered on a space-available basis.
Students must be notified of their acceptance before attending any ERTP course. Walk-ins who have not
been notified of their acceptance will be asked to leave.
Note: If a student is accepted for a course, but is unable to attend, the Training Registrar must be notified
immediately in order to notify applicants from the -waiting list. Failure to notify the registrar prior to the
starting date of the course will jeopardize an applicant's chances to attend future courses.
-------
Applicants who are External Providers, Superfund contractors, or members of state or local emergency planning
commissions (SEPC/LEPC) must indicate this information on their application, not just in a cover letter or on
a fax transmittal sheet (the latter are often separated from the applications for processing).
Course Locations
ERTP courses are offered in each EPA region and at the ERTP Training Facilities located in Cincinnati, Ohio,
and Edison, New Jersey. The courses offered in each region and at each training center are listed in the course
catalog.
City and state locations for courses are determined by the Regional Training Coordinators. These locations are
generally not arranged before the Schedule of Courses is printed, and courses are rarely held at the Regional
Training Coordinator's office. Contact the Training Registrar's office for course locations (for courses in
Regions 1 and 6, contact the Regional Training Coordinator directly).
Class Attendance
ERTP courses are used to meet certain regulatory or educational requirements. Therefore, students are required
to attend full-time. Students who miss any session of a course will not be awarded a course certificate of
completion.
Credit for Attending Courses
The successful completion of ERTP courses allows participants to receive credit that can be used to advance
their professional careers. The types of credit available are:
• Continuing Education Unit (CEU)
Organizations using the criteria established by the Council on Continuing Education may award Continuing
Education Units (CEUs) for their training courses. CEUs are a means whereby qualified, noncredit granting
organizations are provided a uniform and standardized system for measuring their courses. CEUs are used
by students to demonstrate their continuing interest in life-long learning and education. Each course
description lists the CEUs associated with the course.
• American Board of Industrial Hygiene (ABIH) Certification Maintenance (CM) Points
The American Board of Industrial Hygiene, after evaluating an organization's training courses, may award
ABIH Certification Maintenance (CM) Points for industrial hygiene-related courses. ABIH CM points are
used by industrial hygienists to demonstrate their continuing education activities in their field. Each course
description lists the ABIH CM points associated with the course. *
Course Information on the Internet
This information is also available at: www.epa.gov/oerrpage/superfund/programs/er/training.htm or
www.claynet/ERTPindx.html. On either site, click on ERTP to link to program information. This site is
periodically updated with schedule changes.
-------
Tuition
PERSONNEL FROM EPA, OTHER FEDERAL AGENCIES, AND STATE AND LOCAL GOVERN-
MENT DO NOT PAY TUITION FOR ERTP COURSES. Tuition for university staff, community HAZMAT
teams, and students is also waived. Personnel not directly employed by a government agency (e.g., private
industry, contractor, or unemployed) pay tuition according to the fee schedule listed below. Checks should be
made payable to the U.S. Environmental Protection Agency and must be received at least 2 weeks prior to the
course. Do not send checks with applications: wait until receiving an acceptance letter from the Training
Registrar before making payment. Write the name of the student, name of course, and date and location of
course on the check and mail to:
Environmental Response Training Program
U.S. Environmental Protection Agency
Attn: Hermina Williams
26 W. Martin Luther King Drive (B-3)
Cincinnati, OH 45268
Fee Schedule
Environmental Remediation Technologies (165.3) $400.00
Air Monitoring for Hazardous Materials (165.4) $500.00
Hazardous Materials Incident Response Operations (165.5) $800.00
Risk Assessment Guidance for Superfund (165.6) $500.00
Introduction to Groundwater Investigations (165.7) $400.00
Safety and Health Decision-Making for Managers (165.8) $400.00
Sampling for Hazardous Materials (165.9) $500.00
Radiation Safety at Superfund Sites (165.11) $500.00
Emergency Response to Hazardous Material Incidents (165.15) $800.00
Designs for Air Impact Assessments at Hazardous Waste Sites (165.16) $500.00
Inland Oil Spills (165.18) $800.00
Chemical Accident Prevention Auditing (165.19) $500.00
Introduction to Environmental Geophysics (165.20) $500.00
Chemistry for Environmental Professionals (165.21) $500.00
Introductory Preliminary Assessment Training $250.00
Introductory Site Inspection Training $250.00
-------
ENVIRONMENTAL REMEDIATION TECHNOLOGIES (165.3)
3 Days
This introductory-level course provides participants with an overview of the treatment technologies most
frequently used for cleanups of contaminated media. The emphasis of the course is on the technology
description, applicability, and limitations of appropriate treatment technologies, rather than on the design of such
systems. It is intended for new on-scene coordinators, remedial project managers, waste site managers, and
other personnel interested in remediation.
Topics that are discussed include site stabilization; site characterization; fate and transport; technology
screening; capping and containing; basic water treatment; chemical reactions and separations; aqueous biological
treatment; phytoremediation; bioremediation; physical separation; soil washing and solvent extraction; thermal
treatment; immobilization; in-situ treatments; and innovative treatments.
Training methods include lectures and group problem-solving exercises. Case studies are used to demonstrate
applications of the treatment technologies. Group discussions relevant to the course are encouraged.
After completing the course, participants will be able to:
• Evaluate appropriate techniques to assess, stabilize, and screen potential remedies for contaminated
sites.
• Identify the processes and explain the limitations of the most frequently used treatment technologies.
• Identify resources that describe innovative treatment technologies.
Note: Calculators are recommended.
Continuing Education Units: 2.0
Course Dates and Locations
1999
October 19-21 Region 8 December 14-16 Region 10
November 2-4 Region 6
2000
February 8-10 Region 4 March 14-16 Region 9
February 29 - March 2 Region 7 April 4-6 Region 2
-------
Environmental Remediation Technologies (cont.)
2000 (cont.)
April 25-27 Edison, New Jersey September 12-14 Region 3
July 18-20 Region 5 September 26-28 Cincinnati, Ohio
August 22-24 Region 1
6
-------
AIR MONITORING FOR HAZARDOUS MATERIALS (165.4)
5 Days
This course instructs participants in the practices and procedures for monitoring and sampling airborne
hazardous materials. It is designed for personnel who evaluate releases of airborne hazardous materials at
hazardous waste sites or accidental hazardous material releases. Evaluation of worker exposure to these releases
is emphasized.
Topics that are discussed include air monitoring and sampling programs, air monitoring and sampling
techniques, air monitoring and sampling equipment, instrument calibration, exposure guidelines, air dispersion
modeling, and health and safety considerations. The course will include operating procedures for specific air
monitoring and sampling equipment, as well as strategies for air monitoring and sampling at abandoned
hazardous waste sites and for accidental releases of hazardous chemicals.
Instructional methods include a combination of lectures, group discussions, problem-solving sessions, and
laboratory and field exercises with hands-on use of instruments.
After completing the course, participants will be able to:
• Properly use the following types of air monitoring and sampling equipment:
Combustible gas indicators
Oxygen monitors
Detector tubes
Toxic gas monitors
Photoionization detectors
Flame ionization detectors
Gas chromatographs
Sampling pumps and collection media
Direct-reading aerosol monitors.
• Identify the operational parameters, limitations, and data interpretation requirements for the
instruments listed above.
• Identify the factors to be considered in the development of air monitoring and sampling plans.
• Discuss the use of air monitoring data for the establishment of personnel and operations health and
safety requirements.
Note: Calculators are recommended.
Continuing Education Units: 3.0
ABIH Certification Maintenance points: 4.0
-------
Air Monitoring for Hazardous Materials (cont.)
November 1-5
January 10-14
February 7-11
February 28 - March 3
March 27-31
May 8-12
Course Dates and Locations
1999
Region 4
December 6-10
2000
Region 7
Region 5
Edison, New Jersey
Region 9
Cincinnati, Ohio
June 5-9
June 26-30
July 24-28
August 21-25
September 25-29
Region 8
Region 10
Region 6
Region 1
Region 2
Region 3
8
-------
HAZARDOUS MATERIALS INCIDENT RESPONSE OPERATIONS (165.5)
5 Days
This course is designed for personnel involved with the investigation and remediation of uncontrolled hazardous
waste sites and, to a lesser extent, response to an accident involving hazardous materials. It provides basic
information needed to meet the requirements of 29 CFR1910.120 (Hazardous Waste Operations and Emergency
Response).
After completing the course, participants will be able to:
• Identify methods and procedures for recognizing, evaluating, and controlling hazardous substances.
• Identify concepts, principles, and guidelines to properly protect site or response personnel.
• Discuss regulations and action levels to ensure health and safety of the workers.
• Discuss fundamentals needed to develop organizational structure and standard operating procedures.
• Select and use dermal and respiratory protective equipment.
• Demonstrate the use, calibration, and limitations of direct-reading air monitoring instruments.
After completing this course, participants will be more knowledgeable in hazardous waste operations, team
functions, personnel health and safety procedures, and operation of field monitoring equipment.
In some segments of the course, participants are required to wear respiratory equipment, which precludes
wearing eyeglasses. Individuals who are severely restricted without their glasses should be aware that their
participation may be limited unless they have contact lenses, their own spectacle kit or spectacle-equipped
respirator facepiece. During some exercises, participants are required to wear chemical protective clothing,
which may be stressful to certain individuals. Participation in these exercises is not required, but attendance
is required. Individuals who are not currently participating in a medical surveillance program should consult
their physician before attending this course.
Note: This course meets the U.S. Occupational Safety and Health Administration's requirement (29 CFR
1910.120) of a minimum of 40 hours of classroom safety training for hazardous waste site workers.
Continuing Education Units: 3.8
ABIH Certification Maintenance points: 4.5
Course Dates and Locations
1999
September 27 - October 1 Edison, New Jersey October 4-8 Region 3
October 4-8 Cincinnati, Ohio October 18-22 Region 1
-------
Hazardous Materials Incident Response Operations (cont.)
1999 (cont.)
October 25-29
November 1-5
November 29 - December 3
Cincinnati, Ohio
Region 2
Region 7
November 29 - December 3 Edison, New Jersey
December 13-17 Region 8
January 3-7
January 10-14
January 24-28
January 24-28
January 31 - February 4
February 7-11
February 28 - March 3
March 6-10
March 13-17
March 20-24
April 3-7
April 3-7
April 10-14
April 17-21
May 1-5
May 1-5
2000
Cincinnati, Ohio
Region 4
Region 6
Cincinnati, Ohio
Edison, New Jersey
Region 9
Cincinnati, Ohio
Region 10
Edison, New Jersey
Region 5
Edison, New Jersey
Region 3
Cincinnati, Ohio
Region 6
Edison, New Jersey
Region 7
May 15-19
May 22-26
June 5-9
June 12-16
June 19-23
June 26-30
July 10-14
July 24-28
July 31 - August 4
August 7-11
August 21-25
August 21-25
August 28 - September 1
September 11-15
September 11-15
Cincinnati, Ohio
Region 2
Region 4
Edison, New Jersey
Region 9
Cincinnati, Ohio
Edison, New Jersey
Region 8
Cincinnati, Ohio
Region 1
Edison, New Jersey
Cincinnati, Ohio
Region 10
Edison, New Jersey
Region 5
10
-------
RISK ASSESSMENT GUIDANCE FOR SUPERFUND (165.6)
4 Days
This course provides participants with the fundamentals of human health and ecological risk assessment as
applied to the Superfund cleanup process. The course, as stated in the U.S. Environmental Protection Agency's
(EPA) Superfund Risk Assessment Guidance Manual, is specifically designed for Superfund risk assessors, risk
assessment reviewers, remedial project managers, and risk managers. The course is based on the following
EPA documents: Risk Assessment Guidance for Superfund: Volume I - Human Health Evaluation Manual
(Parts A, B, C, andD) &nd Ecological Risk Assessment Guidance for Superfund: Process for Designing and
Conducting Ecological Risk Assessments.
The risk assessment process is presented in three stages: baseline risk assessment, development of preliminary
remediation goals, and evaluation of cleanup alternatives. In addition, the following topics are discussed:
applicable statutes, regulations, and guidance; data collection and evaluation; exposure assessment; toxicity
assessment; risk characterization; principles of ecological assessment; ecological risk assessment guidance for
Superfund; and ecological assessment methods. Current technical and information resources will also be
discussed.
Instructional methods include lectures, class discussions, and group exercises. In addition, a case study will
be used throughout the course to demonstrate the practical applications of the risk assessment guidance.
After completing this course, participants will be able to:
• Identify the applicable statutes, regulations, and guidance pertinent to human health and ecological
risk assessments under Superfund.
• Describe each of the four steps of the baseline risk assessment process.
• Identify and describe ecological assessment methods used to evaluate the effects of contaminants on
the ecosystem.
• Perform a baseline risk assessment and an ecological assessment using EPA's risk assessment
guidance documents.
Note: Calculators are highly recommended.
Continuing Education Units: 2.4
ABIH Certification Maintenance points: 3.5
Course Dates and Locations
1999
October 5-8 Region 10 November 30 - December 3 Region 6
October 19-22 Edison, New Jersey
11
-------
Risk Assessment Guidance for Superfund (cont.)
January 11-14
January 25-28
February 15-18
March 7-10
March 28-31
2000
Region 2
Region 9
Region 7
Region 8
Region 3
April 25-28
June 20-23
July 11-14
August 15-18
Cincinnati, Ohio
Region 5
Region 4
Region 1
12
-------
INTRODUCTION TO GROUNDWATER INVESTIGATIONS (165.7)
3 Days
This introductory course is designed to provide participants with information concerning hydrogeological
processes and the necessary elements of a sound groundwater site investigation. It is intended for personnel who
are involved in groundwater contamination investigations but have little prior hydrogeological experience.
This course is not designed for geologists or hydrogeologists.
Topics that are discussed include hydrogeological definitions and concepts; rock cycle; soil formation;
depositional environments; geochemistry; geophysics; drilling, construction, and placement of monitoring wells;
groundwater sampling considerations; and groundwater modeling.
Instructional methods include lectures, group discussions, case studies, and class problem-solving exercises.
After completing the course, participants will be able to:
• Identify the components of a groundwater system.
• List the primary hydrogeological parameters to be considered in a site investigation.
• Construct a groundwater flow net and calculate hydraulic gradient at a site.
• Discuss common geophysical survey methods.
• Identify geochemical profiles in contaminated groundwater.
• Identify common aquifer stress tests and the information obtained from each.
• Describe monitoring well drilling and construction techniques.
Note: Scientific calculators are required.
Continuing Education Units: 1.9
Course Dates and Locations
1999
October 13-15 Region 5 December 7-9 Region 2
2000
January 19-21 Edison, New Jersey February 15-17 Cincinnati, Ohio
February 1-3 Region 3 February 29 - March 2 Region 4
13
-------
Introduction to Groundwater Investigations {cont.)
2000 (cont.)
March 21-23 Region 1 July 11-13 Region 9
May 9-11 RegionS August 8-10 Region 10
June 20-22 Region 7 September 19-21 Region 6
14
-------
SAFETY AND HEALTH DECISION-MAKING FOR MANAGERS (165.8)
2 Days
This is an advanced safety course for personnel who develop, manage, or supervise health and safety programs
for employees working at hazardous waste sites or treatment, storage, and disposal facilities. The course focuses
on U.S. Occupational Safety and Health Administration (OSHA) and U.S. Environmental Protection Agency
(EPA) regulations and guidelines for establishing a program to protect the health and safety of hazardous waste
workers. It compliments other EPA basic safety courses and provides participants with information about the
specific requirements and recommendations for developing and implementing a worker health and safety
program.
Participants in the course are expected to be knowledgeable in basic personnel protection, safety, and response
operations. At a minimum, participants must have attended a basic 40-hour health and safety course such as
Hazardous Materials Incident Response Operations (165.5), or similar courses.
Instructional methods include lectures, group problem-solving exercises, and classroom discussions. Topics
that are discussed include the required elements of a health and safety plan, such as medical surveillance, safety
and health training, various federal regulations and compliance/consensus standards, hazard and risk analysis,
standard operating safety procedures, personal protective equipment, and air monitoring/sampling.
After completing the course, participants will be able to:
• Identify sections of 29 CFR 1910.120 that relate to operations at hazardous waste sites.
• Identify regulations/consensus standards and guidelines developed by OSHA, EPA, National Institute
of Occupational Safety and Health (NIOSH), American National Standards Institute (ANSI), and
National Fire Protection Association (NFPA) that pertain to personnel engaged in field operations.
• Develop a site safety plan that includes medical monitoring, training requirements, air surveillance
strategies, personal protective equipment, and emergency evacuation plans.
• Conduct an audit of a health and safety plan (HASP) using the EPA's health and safety audit
guidelines.
• Identify some computer software programs available through EPA that will aid in the development
of the HASP.
Note: This course meets and exceeds OSHA's requirement [29 CFR 1910.120(e)(4)J of a minimum of 8
hours of additional specialized training for supervisors of hazardous waste workers.
Continuing Education Units: 1.65
ABIH Certification Maintenance points: 2.0
15
-------
Safety and Health Decision-Making for Managers (cont.)
October 26-27
January 19-20
February 23-24
March 7-8
April 18-19
May 23-24
Course Dates and Locations
1999
Region 10
December 7-8
2000
Region 5
Region 3
Region 2
Region 9
Cincinnati, Ohio
June 13-14
July 18-19
August 15-16
September 19-20
Region 1
Region 8
Edison, New Jersey
Region 6
Region 7
16
-------
SAMPLING FOR HAZARDOUS MATERIALS (165.9)
3 Days
This course provides individuals who have little or no sampling experience with practical information for
effectively sampling hazardous materials at Superfund sites. The course focuses on sampling plan development,
types of equipment suitable for hazardous materials sampling, and procedures for safely collecting samples.
It is intended for personnel responsible for inspections, investigations, and remedial actions at Superrund sites.
Air sampling is specifically addressed in Air Monitoring for Hazardous Materials (165.4) and is not discussed
in this course.
The course is designed to be consistent with the EPA protocol and guidance documents entitled Data Quality
Objectives (DQOs) for Superfund.
Topics that are discussed include sample plan development; procedures for sampling containerized materials,
surface water/lagoons, sediments/sludges, and soil; soil gas sampling; field screening techniques;
documentation; and quality assurance considerations.
Instructional methods include lectures, group discussions, demonstrations, classroom exercises, and outdoor
field exercises with emphasis on the hands-on use of multimedia sampling equipment.
After completing the course, participants will be able to:
• Select the appropriate field screening method for a given contaminant and geologic environment.
• Select the appropriate sampling container and sample preservation method based on the sample
media and analysis required.
• Select the appropriate sampling implements and methods for sampling various containerized wastes.
• Select the appropriate tools and methods for sampling surface water and sediments.
• Describe the basic methods of soil sampling in the unsaturated zone.
• Demonstrate the proper method for obtaining a groundwater sample from a monitoring well.
• Complete the required documentation, including chain of custody and sample labels, for shipment
of environmental samples to an analytical laboratory.
• Complete fundamental tasks in a sampling event from initial site investigation through field data
collection.
Continuing Education Units: 2.0
17
-------
Sampling for Hazardous Materials (cont.)
Course Dates and Locations
September 28-30
October 13-15
January 4-6
January 19-21
February 1-3
February 15-17
February 29 - March 2
March 14-16
March 28-30
April 11-13
1999
Region 1
Region 3
October 26-28
November 16-18
2000
Region 6
Cincinnati, Ohio
Region 10
Edison, New Jersey
Region 3
Region 5
Region 7
Region 8
May 2-4
May 16-18
June 6-8
June 20-22
July 25-27
August 8-10
August 22-24
September 19-21
Region 10
Region 2
Region 9
Region 6
Region 1
Region 2
Cincinnati, Ohio
Region 5
Region 7
Region 8
18
-------
RADIATION SAFETY AT SUPERFUND SITES (165.11)
5 Days
This basic radiation safety course is designed for individuals who may 1) encounter radioactive materials in the
course of their work or 2) become involved with the regulatory oversight of a location contaminated with
radioactive materials. The course provides participants with an understanding of the fundamental principles of
radiation safety, with emphasis placed on radiation detection and contamination control.
Topics that are discussed include types of radiation and methods of interaction, biological effects, radiation
detection and instrumentation, methods of contamination control and decontamination, transportation
regulations, and remedial and disposal options.
Instructional methods include lectures, class problem-solving sessions, and exercises that emphasize the hands-
on use of equipment and the practical application of lecture material.
After completing the course, participants will be able to:
• Detect the presence of radioactive materials while performing investigations at hazardous waste sites.
• Implement methods of radiation exposure reduction and contamination control under the guidance
of health physics personnel.
• Identify regulations concerning area posting, exposure limits and reporting, transportation
requirements, and release limits.
• Propose options for remediation and disposal of radioactive materials.
Continuing Education Units: 2.95
ABIH Certification Maintenance points: 4.0
October 25-29
Course Dates and Locations
1999
Edison, New Jersey
December 6-10
Region 9
2000
January 10-14
January 31 - February 4
March 6-10
Region 10
Region 8
Region 6
March 27-31
May 1-5
June 12-16
Region 4
Region 1
Cincinnati, Ohio
19
-------
Radiation Safety at Superfund Sites (cont.)
2000 (cont.)
June 26-30 Region 7 August 28 - September 1 Region 2
July 10-14 Region 3
20
-------
EMERGENCY RESPONSE TO
HAZARDOUS MATERIAL INCIDENTS (165.15)
5 Days
This course provides emergency response personnel, primarily firefighters, police officers, and emergency
medical services personnel, with the information and skills needed to recognize, evaluate, and control an
incident involving the release or potential release of hazardous materials. It is intended for response personnel
who are currently on or planning to join a hazardous materials response team.
The focus of the course is on recognizing and evaluating a hazardous materials incident, organizing the response
team, protecting response personnel, identifying and using response resources, implementing basic control
measures, refining decision-making skills, and protecting the public. Firefighting techniques are not part of the
course.
Topics that are discussed include safety plans and standard operating procedures, characteristics of hazardous
materials, toxicology, information resources, identification of hazardous materials, incident command for
hazardous materials, size up strategy and tactics, containment and confinement of materials, levels of protection,
chemical protective clothing, direct-reading instruments, and decontamination.
Instructional methods used are lectures, class problem-solving sessions, and exercises. Emphasis is on the
hands-on use of equipment to practically apply lecture information. Class members will participate in two
simulations designed to apply and test the lessons learned during the week. Participants will wear self-contained
breathing apparatus (SCBA) fully encapsulating suits and chemical splash suits. Individuals who are not
participating in a respiratory protection and medical surveillance program should contact their employer and
physician prior to attending this course.
After completing the course, participants will be able to:
• Select the appropriate personal protective equipment for responding to an incident involving
hazardous materials.
• Use combustible gas detectors, oxygen meters, and detector tubes to evaluate the hazards present
at a hazardous materials incident.
• Use confinement and containment techniques to control the release of a hazardous material.
• Identify the importance of an incident command system for effectively managing an incident
involving hazardous materials.
• Develop procedures for the decontamination of emergency response personnel.
• Use size-up techniques to develop strategies and select the appropriate tactics for mitigating
hazardous material incidents.
Individuals who respond to hazardous materials incidents should meet the minimum requirement set forth under
the Occupational Safety and Health Administration's (OSHA) 29 CFR 1910.120 paragraph 9 (q). Individuals
should have awareness and operations levels prior to attending this course.
Note: This course meets and exceeds the minimum OSHA requirements of 24 hours of training for a
hazardous materials technician.
21
-------
Emergency Response to Hazardous Material Incidents (cont.)
Continuing Education Units: 3.6
ABIH Certification Maintenance points: 4.5
October 4-8
October 18-22
January 10-14
February 28 - March 3
March 13-17
April 3-7
May 8-12
Course Dates and Locations
1999
Region 2
Cincinnati, Ohio
November 1-5
November 29 - December 3
2000
Edison, New Jersey
Region 5
Region 6
Region 9
Region 7
June 5-9
June 26-30
July 17-21
August 7-11
September 25-29
Region 8
Region 10
Cincinnati, Ohio
Region 3
Region 1
Region 4
Edison, New Jersey
22
-------
DESIGNS FOR AIR IMPACT ASSESSMENTS
AT HAZARDOUS WASTE SITES (165.16)
3 Days
This course is intended for U.S. Environmental Protection Agency (EPA) On-Scene Coordinators and Remedial
Project Managers, as well as other personnel who are responsible for evaluating risk using air modeling
strategies and air monitoring and sampling.
Case studies, demonstrations, group discussions, and lectures will help prepare participants to:
• Define air impact assessment objectives.
• Evaluate air monitoring, air sampling, and air modeling data to develop an air impact assessment.
• Define air impact assessment assumptions given specific site conditions and operations.
• Implement appropriate quality assurance and quality control when developing an air impact
assessment.
• Develop air impact assessment work plans for hazardous waste sites.
• Implement air impact assessment work plans for hazardous waste sites.
The prerequisite for this course is an Occupational Safety and Health Administration (OSHA) (29 CFR
1910.120) 40-hour health and safety course. A working knowledge of air monitoring instruments and their
theory of operation is helpful. Students will also benefit from attending the Air Monitoring for Hazardous
Materials (165.4) course prior to attending this course.
Continuing Education Units: 2.0
ABIH Certification Maintenance points: 3.0
Course Dates and Locations
1999
September 28-30 Region 8 December 14-16 Region?
October 26-28 Region 3
2000
January 4-6 Region 2 April 25-27 Region 4
January 25-27 Edison, New Jersey May 16-18 Region 9
February 23-25 Cincinnati, Ohio June 13-15 Region 5
March 14-16 Region 10 August 8-10 Region 6
April 11-13 Region 1
23
-------
REMOVAL COST MANAGEMENT SYSTEM (165.17)
1 Day
This course instructs participants in the use of the U.S. Environmental Protection Agency's (EPA) computerized
Removal Cost Management System for tracking costs of removal or remedial actions. It is designed to enable
students, working two per computer, to input information and produce reports about the site using software
developed for EPA's Environmental Response Branch.
The course is intended for EPA on-scene coordinators, remedial program managers, comptroller office
personnel, and EPA contractor personnel involved with cost management at abandoned or uncontrolled waste
sites.
Instructional methods include lectures interspersed with hands-on use of computers to input cost data and
prepare various reports. Exercises include inputting basic information about the site, inputting data from
contractor cost reports and daily cost summaries, editing data, archiving data, and producing site summary and
cost projection reports.
Topics that are discussed include concepts of cost management; EPA's cost management system; cost tracking,
recovery, and documentation; and cost projection and invoicing.
Note: This course is only given upon request of EPA's Regional Office or by special arrangement with
other organizations.
Continuing Education Units: 0.6
24
-------
INLAND OIL SPILLS (165.18)
5 Days
This course is designed for on-scene coordinators (OSCs) from the U.S. Environmental Protection Agency
(EPA), the U.S. Coast Guard, and state agencies who are involved in inland oil spill prevention and cleanup.
The course, which covers portions of the legislation in the National Contingency Plan and the Oil Pollution Act
of 1990, provides practical information for control and cleanup of inland oil spills.
Topics that are covered include the Oil Pollution Act of 1990, revisions to the National Contingency Plan, basic
technical issues associated with inland oil spills, oil spill prevention, cleanup and treatment technologies, roles
of agencies responding to inland oil spills, and monitoring requirements.
Instructional methods include lectures, problem sessions, and hands-on exercises that emphasize the practical
and problem-solving skills related to spill control and cleanup.
After completing this course, participants will be able to:
• Discuss how major legislation (including the Oil Pollution Act of 1990 and the Oil Spill Liability
Trust Fund) relates to spill control and cleanup activities.
Identify basic technical issues associated with inland oil spills.
• Identify the basics of spill prevention control and countermeasure regulations.
• Use basic cleanup and treatment technologies.
• Discuss various agencies' roles when responding to inland oil spills.
The course instructors include federal and state OSCs who may also serve as technical advisors in oil spill
control and cleanup. Other instructors include experienced oil spill responders from the public and private
sectors.
The course is limited to four presentations annually and will be hosted by the U.S. Coast Guard Strike Teams
in one of the following cities: Novato, California; Mobile, Alabama; Fort Dix, New Jersey; and Salt Lake City,
Utah.
Course Dates and Locations to be determined
25
-------
CHEMICAL ACCIDENT PREVENTION AUDITING (165.19)
3 Days
This course provides the technical information and auditing skills needed to conduct risk management programs
auditing, general duty auditing, and chemical safety auditing. It is presented in cooperation with the U.S.
Environmental Protection Agency's (EPA) Chemical Emergency Preparedness and Prevention Office. The
course is based on EPA's Risk Management Programs for Chemical Accidental Release Prevention (40 CFR
Part 68) and EPA's Chemical Safety Audit Program.
Chemical Accident Prevention Auditing covers basic chemical systems and processes, chemical process hazards,
chemical release prevention programs, offsite consequence analyses, process safety systems, process safety
management, emergency response, chemical risk reduction, chemical hazard evaluation, hazard evaluation
techniques, and incident (hazardous material release) investigation. Interviewing techniques, computer
applications including chemical release modeling, and report writing are also covered.
The mock audit is based upon protocol established in EPA's Guidance Manual for EPA Chemical Safety Audit
Team Members, but it also applies to risk management audits and general duty audits of covered stationary
sources.
Participants responsible for reviewing or auditing risk management programs, for general duty or chemical
safety auditing, or for chemical release emergency response planning or auditing activities will benefit from this
course.
After completing this course, participants will be able to:
• Describe chemical processes, process hazards, chemical release prevention programs, process safety
systems, safety management, emergency response, hazards evaluation, and incident investigation
in process plants.
• Discuss interviewing, computer applications, and report-writing techniques.
• Perform auditing activities covered in the Guidance Manual for EPA Chemical Safety Audit Team
Members, and EPA's Risk Management Programs for Chemical Accident Release Prevention (40
CFR Part 68).
Continuing Education Units: 2.14
ABIH Certification Maintenance points: 3.0
Course Dates and Locations
1999
November 2-4 Region 9 December 7-9 Cincinnati, Ohio
27
-------
Chemical Accident Prevention Auditing (cont.)
February 1-3
March 7-9
March 28-30
April 18-20
May 16-18
2000
Region 6
Region 1
Region 10
Edison, New Jersey
Region 4
June 6-8
June 20-22
July 11-13
August 15-17
September 19-21
Region 2
Region 3
Region 7
Region 8
Region 5
28
-------
INTRODUCTION TO ENVIRONMENTAL GEOPHYSICS (165.20)
4 Days
This course provides individuals who have little or no geophysical exploration experience with practical
information to effectively design and supervise geophysical surveys at Superftmd sites. The course focuses on
plan design, types of equipment suitable for hazardous waste site characterization, equipment operation,
procedures for safely collecting data, and the fundamentals of making simple interpretations of the data. It is
intended for personnel responsible for inspections, site characterization, site investigations, and removal and
remedial actions at Superfund sites.
The course is designed to be consistent with the EPA protocol and guidance documents entitled Compendium
of ERT Soil Sampling and Surface Geophysics Procedures, A Compendium of Superfund Field Operations
Methods, and Data Quality Objectives Process for Superfund.
Topics that are discussed include field work plan development; procedures for the use of geophysical methods
for field screening; procedures for collection of field data using magnetometers, seismographs, electromagnetic
and resistivity instruments, ground-penetrating radar; and quality assurance considerations.
Instructional methods include lectures, group discussions, demonstrations, and computer modeling of data and
outdoor field exercises with an emphasis on the hands-on use of geophysical equipment.
After completing the course, participants will be able to:
• Describe the various geophysical methods available for shallow environmental characterization.
• Describe the advantages and limitations of the magnetic, electromagnetic, seismic, resistivity, and
ground-penetrating radar methods in environmental applications.
• Operate geophysical instrumentation under field conditions.
• Collect geophysical field data for use in resolving buried objects and determining geologic and
hydrogeologic characteristics.
• Make an interpretation of simple geophysical field data to resolve buried objects and determine
geologic characteristics.
This course is conducted at the EPA Region 5 facility outside of Chicago, Illinois. The course includes three
half-day outdoor exercises; participants should dress for field work. The exercises are conducted regardless
of weather.
Note: Scientific calculators are recommended.
Continuing Education Units: 2.5
29
-------
Introduction to Environmental Geophysics (cont.)
Course Dates
1999
October 19-22
2000
June 27-30 July 25-28
30
-------
CHEMISTRY FOR ENVIRONMENTAL PROFESSIONALS (165.21)
4 Days
This course provides participants with a review of fundamental chemical concepts and an introduction to
environmental chemistry. Topics are the underlying concepts for sampling, analysis, and cleanup of
contaminated environmental media. This course is designed for environmental professionals who are not
chemists, but who require a basic knowledge of chemistry and environmental chemistry in their work. Specific
topics include: a review of fundamental chemical principles; introduction to organic chemistry, including
chemical nomenclature; fate and transport of chemicals in the environment; introductory analytical chemistry;
data usability; and data quality objectives.
After completing this course, participants will be able to:
• Discuss basic concepts of chemistry and environmental chemistry.
• Describe common scientific measurements and perform unit conversions.
• Explain fundamental chemical concepts necessary to understand environmental chemistry.
• Discuss basic concepts of organic chemistry.
• Identify and name simple organic chemicals using the International Union of Pure and Applied
Chemistry nomenclature system.
• Identify common physical and chemical properties that affect chemical fate and transport in soil,
water, and air.
• Explain the analytical methods and instruments used to characterize the environment.
• Discuss the elements of the data quality objective (DQO) process.
• Evaluate the quality and usability of analytical chemical data.
Note: Scientific calculators are highly recommended.
Continuing Education Units: 2.5
Course Dates and Locations
2000
January 25-28 Region 8 March 21-24 Cincinnati, Ohio
February 15-18 Region 1 April 11-14 Region?
31
-------
Chemistry for Environmental Professionals (cont.)
2000 (cont.)
April 25-28 Region 3 July 25-28 Region 9
May 16-19 Region 5 August 15-18 Region 4
June 20-23 Region 6 August 29 - September 1 Edison, New Jersey
July 18-21 Region 2 September 12-15 Region 10
32
-------
INTRODUCTORY PRELIMINARY ASSESSMENT TRAINING
2 Days
This course provides participants with an introduction to the Superfund site assessment process and the
fundamentals of the preliminary assessment phase of this process as it applies to both non-federal and federal
facility sites. The site assessment process is used to screen hazardous waste sites for inclusion on the U.S.
Environmental Protection Agency' s (EPA) National Priorities List and to prioritize sites for further investigation
and remediation. Participants will receive the background necessary to perform preliminary assessments and
to develop preliminary site scores. The course is designed for individuals with little experience in the initial
evaluation of hazardous waste sites.
The course format is based on the EPA document entitled Guidance for Performing Preliminary Assessments
Under CERCLA, and on any other EPA documentation currently available. The focus is on implementing EPA
preliminary assessment guidance rather than on emphasizing the mechanics of scoring sites using the Hazard
Ranking System. The site assessment process is currently under review by the U.S. EPA; therefore,
modifications to reflect these changes will be made with the concurrence of the U.S. EPA.
Topics to be discussed include an overview of the site assessment process; the fundamentals of the Hazard
Ranking System; data collection strategies; site reconnaissance and documentation procedures; site, source, and
waste characterization techniques; groundwater, surface water, air, and soil exposure pathway analyses; and
preliminary assessment scoring methodology, and the Federal Agency Hazardous Waste Compliance Docket.
This course is immediately followed by the 2-day Introductory Site Inspection Training course. It is highly
recommended that students request both courses when registering. Each day, the Preliminary Assessment
course begins at approximately 8:00 a.m. and ends at 5:00 p.m.
After completing this course, participants will be able to:
• Describe how the outcome of the site assessment process affects the placement of non-federal and
federal facility hazardous waste sites on the National Priorities List (NPL).
• Understand the relationship of the Federal Agency Hazardous Waste Compliance Docket to the
NPL.
• Define key phrases related to preliminary assessments.
• Conduct a preliminary assessment data search and develop a site reconnaissance plan.
• Perform preliminary assessment site scoring.
Note: Scientific calculators are required.
Continuing Education Units: 1.3
33
-------
Introductory Preliminary Assessment Training (cent.)
October 26-27
February 8-9
March 21-22
April 25-26
May 23-24
Course Dates and Locations
1999
Region 6
December 14-15
Region 4
2000
Region 7
Region 2
Region 10
Region 8
June 27-28
August 22-23
September 26-27
Region 5
Region 3
Region 9
34
-------
INTRODUCTORY SITE INSPECTION TRAINING
2 Days
This course provides participants with an introduction to the Superfimd site assessment process and the
fundamentals of the site inspection phase of this process as it relates to both non-federal and federal facility sites.
The site assessment process is used to screen hazardous waste sites for inclusion on the EPA National Priorities
List and to prioritize sites for further investigation and remediation. Participants will receive the background
necessary to evaluate preliminary assessments and to develop and implement site inspection strategies. The
course is designed for individuals with little experience in the initial evaluation of hazardous waste sites.
The course format is based on the EPA document entitled Guidance for Performing Site Inspections Under
CERCLA, and on any other EPA documentation currently available. The focus is on implementing EPA site
inspection guidance rather than on emphasizing the mechanics of scoring sites using the Hazard Ranking
System. The site assessment process is currently under review by the U.S. EPA; therefore, modifications to
reflect these changes will be made with the concurrence of the U.S. EPA.
Topics to be discussed include an overview of the site assessment process; the fundamentals of the Hazard
Ranking System; data collection strategies; site reconnaissance and documentation procedures; site, source, and
waste characterization techniques; groundwater, surface water, air, and soil exposure pathway analyses; site
inspection approaches; media-specific planning and sampling strategies; data evaluation and review; and
reporting requirements.
This course is preceded by the Introductory Preliminary Assessment Training course. It is highly recommended
that students request both courses when registering. Each day, the Site Inspection course begins at
approximately 8:00 a.m. and ends at 5:00 p.m.
After completing this course, participants will be able to:
• Describe how the outcome of the site assessment process affects the placement of non-federal and
federal facility hazardous waste sites on the National Priorities List.
• Define key phrases related to site inspections.
• Review a preliminary assessment document and develop a site reconnaissance plan.
• Develop site sampling strategies that will test preliminary assessment hypotheses and will provide
adequate data for performing Hazard Ranking System calculations.
Continuing Education Units: 1.35
Course Dates and Locations
October 28-29 Region 6 December 16-17 Region 4
35
-------
Introductory Site Inspection Training (cont.)
February 10-11
March 23-24
April 27-28
May 25-26
2000
Region 7
Region 2
Region 10
Region 8
June 29-30
August 24-25
September 28-29
Region 5
Region 3
Region 9
36
-------
REGION 1
(Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, Vermont)
Training Contact:
Address:
Telephone:
Fax:
e-mail:
Registration Information:
Pauline Callahan
U.S. EPA - Region 1
1 Congress Street
Suite HOO(MHR)
Boston, MA 02114-2023
(617)918-1192
(617)918-1183
callahan.pauline@epa.gov
Contact Pauline Callahan at (617) 918-1192 for additional information
concerning the courses in Region 1.
Sampling for Hazardous
Materials (165.9)
Hazardous Materials Incident
Response Operations (165.5)
1999
September 28-30
October 18-22
Safety and Health Decision-
Making for Managers (165.8)
December 7-8
2000
Chemistry for Environmental
Professionals (165.21)
Chemical Accident Prevention
Auditing (165.19)
Introduction to Groundwater
Investigations (165.7)
Designs for Ah- Impact
Assessments at Hazardous
Waste Sites (165.16)
February 15-18
March 7-9
March 21-23
April 11-13
Radiation Safety at Superfund May 1-5
Sites (165.11)
Sampling for Hazardous June 6-8
Materials (165.9)
Emergency Response to Hazardous July 17—21
Material Incidents (165.15)
Air Monitoring for Hazardous July 24-28
Materials (165.4)
37
-------
Region 1 (cont.)
2000 (cont.)
Hazardous Materials Incident August 7-11 Environmental Remediation August 22-24
Response Operations (165.5) Technologies (165.3)
Risk Assessment Guidance August 15-18
for Superfund (165.6)
38
-------
REGION 2
(New Jersey, New York, Puerto Rico, Virgin Islands)
Training Contact:
Address:
Telephone:
Fax:
e-mail:
Registration Information:
Sandra Cohen
U.S. EPA - Region 2 (EBRD)
290 Broadway, 18th Floor
New York, NY 10007-1866
(212)637-4434
(212)637-4360
cohen .sandra@epa.gov
Contact the EPA Training Registrar at the address and telephone
number listed on page 1.
Emergency Response to
Hazardous Material Incidents
(165.15)
Hazardous Materials Incident
Response Operations (165.5)
Designs for Air Impact
Assessments at Hazardous
Waste Sites (165.16)
Risk Assessment Guidance
forSuperfund(165.6)
Safely and Health Decision-
Making for Managers (165.8)
Introductory Preliminary
Assessment Training
Introductory Site
Inspection Training
1999
October 4-8 Sampling for Hazardous
Materials (165.9)
November 1-5 Introduction to Groundwater
Investigations (165.7)
2000
January 4-6 Environmental Remediation
Technologies (165.3)
January 11-14
March 7-8
March 21-22
March 23-24
Hazardous Materials Incident
Response Operations (165.5)
Chemical Accident Prevention
Auditing (165.19)
Sampling for Hazardous
Materials (165.9)
Chemistry for Environmental
Professionals (165.21)
November 16-18
December 7-9
April 4-6
May 22-26
June 6-8
June 20-22
July 18-21
39
-------
Region 2 (com.)
2000 tcont.)
Air Monitoring for August 21-25 Radiation Safety at Superfund August 28-
Hazardous Materials (165.4) Sites (165.11) September 1
40
-------
REGION 3
(Delaware, Maryland, Pennsylvania, Virginia, West Virginia)
Training Contact:
Address:
Telephone:
Fax:
e-mail:
Registration Information:
Sally Pascal
U.S. EPA - Region 3
(3HSOO)
1650 Arch Street
Philadelphia, PA 19103
(215)814-3126
(215)314-3001
pascal.sally@epa.gov
Contact the EPA Training Registrar at the address and telephone
number listed on page 1.
1999
Hazardous Materials Incident
Response Operations (165.5)
Sampling for Hazardous
Materials (165.9)
Introduction to Groundwater
Investigations (165.7)
Safety and Health Decision-
Making for Managers (165.8)
Sampling for Hazardous
Materials (165.9).
Risk Assessment Guidance
for Superfund (165.6)
Hazardous Materials Incident
Response Operations (165.5)
October 4-8
October 13-15
Designs for Air Impact
Assessments at Hazardous
Waste Sites (165.16)
2000
February 1-3
February 23-24
February 29-
March2
March 28-31
April 3-7
Chemistry for Environmental
Professionals (165.21)
Chemical Accident Prevention
Auditing (165.19)
Emergency Response to
Hazardous Material Incidents
(165.15)
Radiation Safety at Superfund
Sites (165.11)
Introductory Preliminary
Assessment Training
October 26-28
April 25-28
June 20-22
June 26-30
July 10-14
August 22-23
41
-------
Region 3 (cont.)
2000 (com.)
Introductory Site August 24-25 Air Monitoring for September 25-29
Inspection Training Hazardous Materials (165.4)
Environmental Remediation September 12-14
Technologies (165.3)
42
-------
REGION 4
(Alabama, Florida, Georgia, Kentucky, Mississippi, North Carolina, South Carolina, Tennessee)
Training Contact:
Address:
Telephone:
Fax:
e-mail:
Registration Information:
Margaret Meares Crowe
U.S. EPA - Region 4
Atlanta Federal Center
61 Forsyth St., S.W.
Atlanta, GA 30303
(404) 562-8687
(404) 562-8628
crowe.margaret@epa.gov
Contact the EPA Training Registrar at the address and telephone
number listed on page 1.
Air Monitoring for
Hazardous Materials (165.4)
Introductory Preliminary
Assessment Training
November 1-5
December 14-15
Introductory Site
Inspection Training
December 16-17
2000
Hazardous Materials Incident
Response Operations (165.5)
Environmental Remediation
Technologies (165.3)
Introduction to Groundwater
Investigations (165.7)
Radiation Safety at Superfund
Sites (165.11)
January 10-14
February 8-10
February 29-
March2
March 27-31
Designs for Air Impact April 25-27
Assessments at Hazardous
Waste Sites (165.16)
Chemical Accident Prevention May 16-18
Auditing (165.19)
Hazardous Materials Incident June 5-9
Response Operations (165.5)
Risk Assessment Guidance July 11-14
for Superfund (165.6)
43
-------
Region 4 (cont.)
2000 (cont.)
Emergency Response to August 7-11 Chemistry for Environmental August 15-18
Hazardous Material Incidents Professionals (165.21)
(165.15)
44
-------
REGION 5
(Illinois, Indiana, Ohio, Michigan, Minnesota, Wisconsin)
Training Contact:
Address:
Telephone:
Fax:
e-mail:
Registration Information:
Steve Ostrodka
U.S. EPA - Region 5
(MC:SRT-4J)
77 West Jackson Boulevard
Chicago, IL 60604-3507
(312)886-3011
(312)353-9281
ostrodka.stephen@epa.gov
Contact the EPA Training Registrar at the address and telephone
number listed on page 1.
Introduction to Groundwater
Investigations (165.7)
1999
October 13-15
Introduction to Environmental
Geophysics (165.20)
October 19-22
2000
Safety and Health Decision-
Making for Managers (165.8)
Air Monitoring for
Hazardous Materials (165.4)
Emergency Response to
Hazardous Material Incidents
(165.15)
Sampling for Hazardous
Materials (165.9)
Hazardous Materials Incident
Response Operations (165.5)
Chemistry for Environmental
Professionals (165.21)
January 19-20
February 7-11
February 28-
March3
March 14-16
March 20-24
May 16-19
Designs for Air Impact June 13-15
Assessments at Hazardous
Waste Sites (165.16)
Risk Assessment Guidance June 20-23
for Superfund (165.6)
Introduction to Environmental June 27-30
Geophysics (165.20)
Introductory Preliminary June 27-28
Assessment Training
Introductory Site June 29-30
Inspection Training
Environmental Remediation July 18-20
Technologies (165.3)
45
-------
Region 5 (cont.)
2000 (cont.)
Introduction to Environmental July 25-28 Hazardous Materials Incident September 11-15
Geophysics (165.20) Response Operations (165.5)
Sampling for Hazardous August 8-10 Chemical Accident Prevention September 19-21
Materials (165.9) Auditing (165.19)
46
-------
REGION 6
(Arkansas, Louisiana, New Mexico, Oklahoma, Texas)
Training Contact:
Address:
Telephone:
Fax:
e-mail:
Registration Information:
Keith Reddick
U.S. EPA - Region 6
1445 Ross Avenue
Suite 1200,10th Floor
Dallas, TX 75202-2733
(214)665-8338
(214)665-7447
reddick.keith@epa.gov
Contact Keith Reddick at (214) 665-8338 for additional
information about the courses in Region 6.
1999
Introductory Preliminary
Assessment Training
Introductory Site
Inspection Training
October 26-27
October 28-29
Environmental Remediation
Technologies (165.3)
Risk Assessment Guidance
for Superfund (165.6)
November 2-4
November 30-
December 3
2000
Sampling for Hazardous
Materials (165.9)
Hazardous Materials Incident
Response Operations (165.5)
Chemical Accident Prevention
Auditing (165.19)
Radiation Safety at Superfund
Sites (165.11)
Emergency Response to
Hazardous Material Incidents
(165.15)
January 4-6
January 24-28
February 1-3
March 6-10
March 13-17
Hazardous Materials Incident April 17-21
Response Operations (165.5)
Sampling for Hazardous May 16-18
Materials (165.9)
Chemistry for Environmental June 20-23
Professionals (165.21)
Air Monitoring for June 26-30
Hazardous Materials (165.4)
Designs for Air Impact August 8-10
Assessments at Hazardous
Waste Sites (165.16)
47
-------
Region 6 (cont.)
2000 (cont.)
Safety and Health Decision- August 15-16 Introduction to Groundwater September 19-21
Making for Managers (165.8) Investigations (165.7)
48
-------
REGION 7
(Iowa, Kansas, Missouri, Nebraska)
Training Contact:
Address:
Telephone:
Fax:
e-mail:
Registration Information:
i
Evelyn VanGoethem
U.S. EPA - Region 7
(SUPER/SDDD)
901 North 5* Street
Kansas City, KS 66101
(913)551-7659
(913)551-7145
vangoethem.evelyn@epa.gov
Contact the EPA Training Registrar at the address and telephone
number listed on page 1.
Y
Hazardous Materials Incident
Response Operations (165.5)
1999
November 29-
December 3
Designs for Air Impact
Assessments at Hazardous
Waste Sites (165.16)
December 14-16
2000
Air Monitoring for
Hazardous Materials (165.4)
Introductory Preliminary
Assessment Training
Introductory Site
Inspection Training
Risk Assessment Guidance
for Superfund (165.6)
January 10-14
February 8-9
February 10-11
February 15-18
Environmental Remediation February 29-
Technologies (165.3) March 2
Sampling for Hazardous March 28-30
Materials (165.9)
Chemistry for Environmental April 11-14
Professionals (165.21)
Hazardous Materials Incident May 1-5
Response Operations (165.5)
49
-------
Region 7 (cont.)
2000 (cont.)
Emergency Response to May 8-12 Chemical Accident Prevention July 11-13
Hazardous Material Incidents Auditing (165.19)
(165.15)
Introduction to Groundwater June 20-22 Sampling for Hazardous August 22-24
Investigations (165.7) Materials (165.9)
Radiation Safety at Superfund June 26-30 Safety and Health Decision- September 19-20
Sites (165.11) Making for Managers (165.8)
50
-------
REGION 8
(Colorado, Montana, North Dakota, South Dakota, Utah, Wyoming)
Training Contact:
Address:
Telephone:
Fax:
e-mail:
Registration Information:
JimKnoy
U.S. EPA - Region 8
(8EPR-SA)
999 18th Street
Suite 500, Room 6N227
Denver, CO 80202-2405
(303)312-6793
(303)312-6071
knoy.jim@epa.gov
Contact the EPA Training Registrar at the address and telephone
number listed on page 1.
1999
Designs for Air Impact
Assessments at Hazardous
Waste Sites (165.16)
Environmental Remediation
Technologies (165.3)
Emergency Response to
Hazardous Material Incidents
(165.15)
Chemistry for Environmental
Professionals (165.21)
Radiation Safety at Superfund
Sites (165.11)
Risk Assessment Guidance
for Superfund (165.6)
September 28-30
October 19-21
November 1-5
Air Monitoring for
Hazardous Materials (165.4)
Hazardous Materials Incident
Response Operations (165.5)
2000
January 25-28
January 31-
February 4
March 7-10
Sampling for Hazardous
Materials (165.9)
Introduction to Groundwater
Investigations (165.7)
Introductory Preliminary
Assessment Training
December 6-10
December 13-17
April 11-13
May 9-11
May 23-24
51
-------
Region 8 (com.)
2000 (cont.)
Introductory Site May 25-26 Chemical Accident Prevention August 15-17
Inspection Training Auditing (165.19)
Safety and Health Decision- June 13-14 Sampling for Hazardous September 19-21
Making for Managers (165.8) Materials (165.9)
Hazardous Materials Incident July 24-28
Response Operations (165.5)
52
-------
REGION 9
(Arizona, California, Hawaii, Nevada, Guam)
Training Contact:
Address:
Telephone:
Fax:
e-mail:
Registration Information:
ChereAmie Bischoff
U.S. EPA - Region 9
(SFD-4)
75 Hawthorne Street
San Francisco, CA 94105
(415) 744-2167
(415)744-2180
bischoff.chereamie@epa.gov
Contact the EPA Training Registrar at the address and telephone
number listed on page 1.
Chemical Accident Prevention
Auditing (165.19)
1999
November 2-4
Radiation Safety at Superfund
Sites (165.11)
December 6-10
2000
Risk Assessment Guidance
for Superfund (165.6)
Hazardous Materials Incident
Response Operations (165.5)
Environmental Remediation
Technologies (165.3)
Air Monitoring for
Hazardous Materials (165.4)
Emergency Response to
Hazardous Material Incidents
(165.15)
January 25-28
February 7-11
March 14-16
March 27-31
April 3-7
Safety and Health Decision- April 18-19
Making for Managers (165.8)
Sampling for Hazardous May 2-4
Materials (165.9)
Designs for Air Impact May 16-18
Assessments at Hazardous
Waste Sites (165.16)
Hazardous Materials Incident June 19-23
Response Operations (165.5)
Introduction to Groundwater July 11-13
Investigations (165.7)
53
-------
Region 9 (cont.)
2000 (cont.)
Chemistry for Environmental July 25-28 Introductory Site September 28-29
Professionals (165.21) Inspection Training
Introductory Preliminary September 26-27
Assessment Training
54
-------
REGION 10
(Alaska, Idaho, Oregon, Washington)
Training Contact:
Address:
Telephone:
Fax:
e-mail:
Registration Information:
Diane Ruthruff
U.S. EPA-Region 10
(OMP-077)
1200 6th Avenue
Seattle, WA 98101
(206)553-5139
(206) 553-4672
ruthruff.diane@epa.gov
Contact the EPA Training Registrar at the address and telephone
number listed on page 1.
Risk Assessment Guidance
for Superfund (165.6)
Safety and Health Decision-
Making for Managers (165.8)
Sampling for Hazardous
Materials (165.9)
October 5-8
October 26-27
October 26-28
Emergency Response to
Hazardous Material Incidents
(165.15)
Environmental Remediation
Technologies (165.3)
November 29-
December 3
December 14-16
2000
Radiation Safety at Superfund
Sites (165.11)
Sampling for Hazardous
Materials (165.9)
Hazardous Materials Incident
Response Operations (165.5)
January 10-14
February 1-3
March 6-10
Designs for Air Impact March 14-16
Assessments at Hazardous
Waste Sites (165.16)
Chemical Accident Prevention March 28-30
Auditing (165.19)
Introductory Preliminary April 25-26
Assessment Training
55
-------
Region 10 (cont.)
2000 icont.)
Introductory Site April 27-28 Hazardous Materials Incident August 28-
Inspection Training Response Operations (165.5) September 1
Air Monitoring for June 5-9 Chemistry for Environmental September 12-15
Hazardous Materials (165.4) Professionals (165.21)
Introduction to Groundwater August 8-10
Investigations (165.7)
56
-------
ENVIRONMENTAL RESPONSE TRAINING CENTER
CINCINNATI, OHIO
1999
Hazardous Materials Incident
Response Operations (165.5)
Emergency Response to
Hazardous Material Incidents
(165.15)
Hazardous Materials Incident
Response Operations (165.5)
Sampling for Hazardous
Materials (165.9)
Hazardous Materials Incident
Response Operations (165.5)
Introduction to Groundwater
Investigations (165.7)
Designs for Air Impact
Assessments at Hazardous
Waste Sites (165.16)
Hazardous Materials Incident
Response Operations (165.5)
Chemistry for Environmental
Professionals (165.21)
Hazardous Materials Incident
Response Operations (165.5)
Risk Assessment Guidance
for Superfund (165.6)
Air Monitoring for
Hazardous Materials (165.4)
October 4-8
October 18-22
Hazardous Materials Incident
Response Operations (165.5)
Chemical Accident Prevention
Auditing (165.19)
2000
January 3-7
January 19-21
January 24-28
February 15-17
February 23-25
February 28-
March3
March 21-24
April 10-14
April 25-28
May 8-12
Hazardous Materials Incident
Response Operations (165.5)
Safety and Health Decision-
Making for Managers (165.8)
Emergency Response to
Hazardous Material Incidents
(165.15)
Radiation Safety at Superfund
Sites (165.11)
Hazardous Materials Incident
Response Operations (165.5)
Sampling for Hazardous
Materials (165.9)
Hazardous Materials Incident
Response Operations (165.5)
Hazardous Materials Incident
Response Operations (165.5)
Environmental Remediation
Technologies (165.3)
October 25-29
December 7-9
May 15-19
May 23-24
June 5-9
June 12-16
June 26-30
July 25-27
July 31-
August 4
August 21-25
September 26-28
57
-------
ENVIRONMENTAL RESPONSE TRAINING CENTER
EDISON, NEW JERSEY
1999
Hazardous Materials Incident
Response Operations (165.5)
Risk Assessment Guidance
for Superfund (165.6)
September 27-
October 1
October 19-22
Radiation Safety at Superfund
Sites (165.11)
Hazardous Materials Incident
Response Operations (165.5)
October 25-29
November 29-
December 3
2000
Emergency Response to
Hazardous Material Incidents
(165.15)
Introduction to Groundwater
Investigations (165.7)
Designs for Air Impact
Assessments at Hazardous
Waste Sites (165.16)
Hazardous Materials Incident
Response Operations (165.5)
Sampling for Hazardous
Materials (165.9)
Air Monitoring for
Hazardous Materials (165.4)
Hazardous Materials Incident
Response Operations (165.5)
Hazardous Materials Incident
Response Operations (165.5)
Chemical Accident Prevention
Auditing (165.19)
January 10-14
January 19-21
January 25-27
January 31-
February 4
February 15-17
February 28-
March3
March 13-17
April 3-7
April 18-20
Environmental Remediation
Technologies (165.3)
Hazardous Materials Incident
Response Operations (165.5)
Hazardous Materials Incident
Response Operations (165.5)
Hazardous Materials Incident
Response Operations (165.5)
Safety and Health Decision-
Making for Managers (165.8)
Hazardous Materials Incident
Response Operations (165.5)
Chemistry for Environmental
Professionals (165.21)
Hazardous Materials Incident
Response Operations (165.5)
Emergency Response to
Hazardous Material Incidents
(165.15)
April 25-27
May 1-5
June 12-16
July 10-14
July 18-19
August 21-25
August 29-
September 1
September 11-15
September 25-29
59
-------
EXTERNAL TRAINING PROGRAMS
To increase the number of training courses available to personnel who respond to hazardous material
emergencies or are involved with activities at uncontrolled hazardous waste sites, the Emergency Response
Division of the U.S. Environmental Protection Agency's (EPA) Office of Emergency and Remedial Response
has accepted other organizations as providers of certain Environmental Response Team (ERT) Environmental
Response Training Program (ERTP) courses. The organizations listed on the following pages are authorized
to present one or both of the following courses: Hazardous Materials Incident Response Operations (165.5) and
Emergency Response to Hazardous Material Incidents (165.15).
For specific information about the locations, dates, and courses presented by these external providers, contact
the appropriate person or organization listed on the following pages.
EPA External Training Coordinator:
Bruce Potoka
U.S. Environmental Protection Agency
26 W. Martin Luther King Drive (B-3)
Cincinnati, OH 45268
513 569-7537
61
-------
APPROVED EXTERNAL PROVIDERS
The following organizations have been approved by EPA to present ERTP courses. Other organizations may
have received approval in the past; however, only the organizations listed here were actively presenting courses
at the time of this publication. The courses presented by these organizations have been reviewed by ERT
personnel to ensure that they are consistent with the courses presented by EPA. Students attending EPA courses
presented by external providers will receive an EPA certificate of completion in addition to any other certificate
awarded by the external provider. Additions may be made to this list whenever providers meet qualifications.
Brent Engel - Environmental Specialist
ACME Environmental, Inc.
2238 Wyoming NE
Albuquerque, NM 87112
505 294-5565
Jim F. Clements - Instructor, Hazardous
Materials Technology
Amarillo College
P.O. Box 447
Amarillo, TX 79178
806 354-6045
Thomas O. Murray, CIH Vice President
Applied Associates International, Inc.
300 Wilshire Boulevard, Suite 237
Casselberry, FL 32707
407 834-5310
David J. Glaser - Director,
Education & Training Programs
Concurrent Technologies Corporation/Center for
Hazardous Materials Research
University of Pittsburgh Applied Research Center
320 William Pitt Way
Pittsburgh, PA 15238
412 826-5320, ext. 245
James G. Cragan - Fire Services Coordinator
Chippewa Valley Technical College
620 West Clairemont Avenue
Eau Claire, WI54701
715 833-6342
Captain Robert J. Ingram
The City of New York Fire Academy
Randalls Island
New York, NY
212 860-2040
Msgt Dennis Lombard, USAF -
Fire Service Training Superintendent
617 Civil Engineering Squadron
Unit 3335-CEXF
United States Air Forces in Europe
APO AE 09094-3335
Ronald W. Keane - Training Coordinator
Connecticut Fire Academy
P.O. Box 3383
Windsor Locks, CT 06096-3383
203 627-6363, ext. 237
John D. Turley - President
Education & Consulting Resources, Inc.
938 Oak Ridge Place
Myrtle Beach, SC 29572
803 272-3855
Deborah C. Alderink, CIH
Environmental Health Resources, Inc.
4547 Cascade Road NE
Grand Rapids, MI 49546
616 942-5916
Kevin Lynch
Environmental Products & Services, Inc.
532 State Fair Boulevard
P.O. Box 315
Syracuse, NY 13209
315 471-0503 or 1-800-843-8265
Martin H. Finkel, CIH - Training Director
Environmental Safety & Health of Alaska
200 W. 34th Ave., Suite 553
Anchorage, AK 99503
907 333-0012
63
-------
Approved External Providers (cont.)
Jerry P. Porter - President
Genesis Environmental, Inc.
103 North Main Street, Suite 101
Greenville, SC 29601
803 370-1067
Barry Murner - Manager, Special Programs
Georgia Fire Academy
Georgia Public Safety Training Center
1000 Indian Springs Drive
Forsyth, GA 31029
912 993-4670
Jerry L. Smith - President
HazTrain, Inc.
5 Oak Avenue
P.O. Box 2206
LaPlata, MD 20646
301 932-0994
Fred Holmes - Manager, Environmental Group
Indian Fire & Safety, Inc.
P.O. Box 1306
Hobbs, NM 88241
505 397-3884
James C. Meldrum - Founder
Industrial/Environmental Safety Management
Consulting, Inc.
P.O. Box 331
Crystal Lake, IL 60039-0331
815 455-1762
Institute for Environmental Management
University of Oklahoma
P.O. Box 26901
801 NE 13th, Room 413
Oklahoma City, OK 73190
405 271-2070
William S. Carver - Fire/Rescue Training
Coordinator
Kentucky Tech - Area 4
1845 Loop Drive
Bowling Green, KY 42101-3601
502 746-7461
Dennis J. Ladwig, Ed.D., President
Lakeshore Technical College
1290 North Avenue
Cleveland, WI 53015-1414
414 458-4183
Mike Sager
Louisiana Office of State Police
TESS
Department of Public Safety and Corrections
P.O. Box 66614
Baton Rouge, LA 70896
504925-6113
Ronald L. Kimberlin, Municipal Hazardous
Material Coordinator
LSU Fire and Emergency Training Institute
6868 Nicholson Drive
Baton Rouge, LA 70820
504 766-0600 or 1-800-257-3473
Capt. Philip A. Colborn - Environmental Coordinator
Marine Corps Air Station
HQ & HQ Squadron, HAZMAT
Box 555151
Camp Pendleton, CA 92055-5151
619 725-8460
Troy D. Corbin - Director, Training Services
Marine & Environmental Testing, Inc.
P.O. Box 5693
Portland, OR 98228-5693
503 282-6920
Lt. Gerald A. Wheeler - Coordinator,
Hazardous Materials Training
Michigan State Police
Hazardous Materials Training Center
7426 North Canal Road
Lansing, MI 48913
517 322-1942
James Martins -
Deputy Chief, Special Teams
Milwaukee Fire Department
711 West Wells Street
Milwaukee, WI 53233
414 226-8949
64
-------
Approved External Providers (cont.)
Dr. Rick Blackburn
New Mexico State University - Carlsbad
Waste-Management Education & Research
Consortium
1500 University Drive
Carlsbad, NM 88220
505 234-9214
Bryan Swain
New Mexico State University - Las Cruces
Dept. WERC
P.O. Box 30001
Las Cruces, NM 88003-8001
505 646-1378 or 1-800-523-5996
Gary Burnam - Fire Training Coordinator
Nicolet Area Technical College
P.O. Box 518
Rhinelander, WI 54501-0518
715 365-4495
Albert E. Grundon - President
Phoenix Training Group
2365 Paragon Drive, Unit A
San Jose, CA 95131
408 441-6150
Captain Shelton T. Eudy -
Career Development Center
Raleigh Fire Department
P.O. Box 590
Raleigh, NC 27602
919 831-6656
Robert L. Edgar - Director, Health, Safety,
Training & Environmental Compliance
Rinchem Company, Inc.
6133 Edith Boulevard, NE
Albuquerque, NM 87107
505 345-3655
Daniel Steller - Director,
Institute for Environmental Health & Safety
Roane State Community College
728 Emory Valley Road
Oak Ridge, TN 37830
423 481-3493
Donald P. McGuire - Director,
Office of Emergency Services
Rockland County Fire Training Center
Fireman's Memorial Drive
Pomona, NY 10970
914 364-8904
Capt. Robert D. Steadman
Savannah River Site Fire Department Training
Westinghouse Savannah River Company
Building 706 C
Aiken, SC 29808
803 557-9751 or 557-9676
Robert E. Bohannan - Vice President
Scott, Allard & Bohannan, Inc.
3001 W. Indian School Road
Suite 312
Phoenix, AZ 85017
602 263-0045
David M. Hamm
Southeastern Safety Training
67 Jones Lane
Moselle MS 39459
1-800-261-0064
Glenn Joseph
South Technical Education Center Fire Academy
1300 SW 30th Avenue
Boynton Beach, FL 33426-9099
407 369-7029
Perry Hoskins
Spectra Training
P.O. Box 33213
Phoenix, AZ 85067
602 266-0705
Debbie Midgley
Technology Training Center
314 West Mermod, Suite 109
Carlsbad, NM 88220
505 885-0400
65
-------
Approved External Providers (cont.)
Ronald C. Nicholson
Bioenvironmental Engineering Department
U.S. Air Force School of Aerospace Medicine
2602 West Gate Road
Brooks Air Force Base, TX 78235-5252
210 536-3831
Michael J. Smith
Utah Valley State College
3131 Mike Jense Parkway
Provo, UT 84601
801 764-7700
Randy Stegner
Water Technology International Corporation
1 East Avenue, Suite 21
Lockport, NY 14094
716 438-9307
Jeff Reames - Fire/Rescue Coordinator,
Public Safety Services
Western Wisconsin Technical College
304 North Sixth Street
LaCrosse, WI 54602-0908
608 785-9248
66
-------
EXTERNAL PROVIDERS WITH INTERIM APPROVAL
The following organizations have applied for permission to present ERTP courses and have received interim
approval from EPA. These organizations are authorized to present ERTP courses and may be granted final
approval following an audit by ERT personnel. Students successfully completing courses presented by these
organizations will receive an EPA certificate of completion. Additions and deletions are made to this list as
providers qualify or become inactive.
Training Officer
Atlantic Strike Team, U.S. Coast Guard
Building 5614, Doughboy Loop
Fort Dix, NJ 08640
609 724-0008
Paul C. Bacon - President
Capital Environmental Training and Assessments
Services, Inc.
P.O. Box 3413
Wichita Falls, TX 76301-0413
1-800-495-8699 (voice mail only)
Jesse Gomez
Center for Environmental Initiatives and
Hands-on Training
HQ USAFACFS
Attn: ATZR-BT
Fort Sill, OK 73503-5100
405442-2111
Sam Bishop
Duke Energy Training
1900 N. Main Street
Mount Holly, NC 28120
704 822-2809
S.R. Hunter - Training Officer
Environmental Management, Inc.
P.O. Box 3940
Edmond, OK 73083-3940
405282-8510
Darrel Caldwell - President
ENYIROSAFE International, Inc.
600 Kendrick, Suite C-29
Houston, TX 77060
713 447-7194
Kenton L. Brown - Emergency Response
Coordinator
Florida Department of Environmental
Protection, Northeast District
7825 Baymeadows Way, Suite B200
Jacksonville, FL 32256-7590
904 448-4320, ext. 246
Richard Bergquist - Instructor
Florida State Fire College
11655 N.W. Gainesville Road
Ocala, FL 34482-1486
904 732-1330
Trey Green
The GBK Partnerships, Inc.
415 NW 43rd Street
Oklahoma City, OK 73118
1-888-602-3541 (pager)
Patrick T. Thornton, President
Hazcom International, Inc.
312 N. Fourth Street
Clairton, PA 15025
412 233-2623
Leo Traverse, GET - President
HAZMATEAM, Inc.
12 Kimball Hill Road
Hudson, NH 03051-3915
603 882-6247
Paul Wolsonovich
Hygiene, Safety, and Training, Inc.
419 Ford Street
Ford City, PA 16226
724 763-8800
67
-------
External Providers with Interim Approval (cont.)
Gil Bakshi President
International Training Institute of South
Florida, Inc.
9225 Ulmerton Road, Suite K
Largo, FL 34641
813 584-4229
Dawn Henderlight, Environmental Specialist
Lamar Dunn & Associates, Inc.
3305 Maloney Road
Knoxville, TN 37920
423 573-7692
David W. Johnson, Director of Environmental
Training
Facilities Engineer Division
Marine Corps Base, Camp Smedley D. Butler
Okinawa Unit 35001
Oil 81-611-745-0245
Oil 81-611-745-3404
Douglas R. Stutz, Ph.D. Program Director
Miami Dade Community College, North
11380 N.W. 27th Avenue
Miami, FL 33167
305 237-1798
J. Michael Lofton
Mike Lofton Training Consultant
P.O. Box 176
Slaughter, LA 70777
504 654-3207
Michael Whelchel
TSB Loss Control Consultants, Inc.
3940 Morton Bend Road, S.W.
Rome, GA 30161
706 291-1222
68
-------
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
APPLICATION FOR TRAINING
Form Approved
OMB No. 158-R0005
1. NAME OF APPLICANT (First, middle, last)
2. TITLE OF COURSE DESIRED 3. COURSE NUMBER
4. PLACE WHERE GIVEN 5. DATES
6. SPONSOR OR EMPLOYER (Name, address)
City State Zip Code
Phone No.
8. PROFESSION OR OCCUPATION
7. MAILING ADDRESS OF APPLICANT (If different from item 6)
City State Zip Code
Phone no.
9. TOTAL YEARS EXPERIENCE IN PROFESSION
10. POSITION TITLE
11. BRIEF DESCRIPTION OF YOUR PRESENT POSITION
12. PREVIOUS HAZARDOUS MATERIALS TRAINING COURSES ATTENDED
TITLES DATES
LOCATION
13. HIGH SCHOOL GRADUATE
D
YES
NO
14. NUMBER OF YEARS EDUCATION COMPLETED BEYOND
HIGH SCHOOL
15. COLLEGE OR UNIVERSITY EDUCATION
NAME OF INSTITUTION
DATE ATTENDED
MAJOR
DEGREE
16. SIGNATURE OF APPLICANT
18. SIGNATURE OF APPROVING OFFICER
19. TITLE
17. DATE
20. DATE
21. AGENCY USE ONLY
AMT. REC'D.
DATE
BILLING INFOR.
Checks should be made payable to: U.S. Environmental Protection Agency.
EPA-271 (Cin) Revised (7-90)
69
-------
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
APPLICATION FOR TRAINING
Form Approved
OMB No. 158-R0005
1. NAME OF APPLICANT (First, middle, last)
2. TITLE OF COURSE DESIRED 3. COURSE NUMBER
4. PLACE WHERE GIVEN 5. DATES
6. SPONSOR OR EMPLOYER (Name, address)
City State Zip Code
Phone No.
8. PROFESSION OR OCCUPATION
7. MAILING ADDRESS OF APPLICANT (If different from item 6)
City State Zip Code
Phone no.
9. TOTAL YEARS EXPERIENCE IN PROFESSION
10. POSITION TITLE
11. BRIEF DESCRIPTION OF YOUR PRESENT POSITION
12. PREVIOUS HAZARDOUS MATERIALS TRAINING COURSES ATTENDED
TITLES DATES
LOCATION
13. HIGH SCHOOL GRADUATE
YES
NO
14. NUMBER OF YEARS EDUCATION COMPLETED BEYOND
HIGH SCHOOL
15. COLLEGE OR UNIVERSITY EDUCATION
NAME OF INSTITUTION
DATE ATTENDED
MAJOR
DEGREE
16. SIGNATURE OF APPLICANT
18. SIGNATURE OF APPROVING OFFICER
19. TITLE
17. DATE
20. DATE
21. AGENCY USE ONLY
AMT. REC'D.
DATE
BILLING INFOR.
Checks should be made payable to: U.S. Environmental Protection Agency.
EPA-271 (Cin) Revised (7-90)
71
-------
UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
APPLICATION FOR TRAINING
Form Approved
OMB No. 158-R0005
1. NAME OF APPLICANT (First, middle, last)
2. TITLE OF COURSE DESIRED 3. COURSE NUMBER
4. PLACE WHERE GIVEN 5. DATES
6. SPONSOR OR EMPLOYER (Name, address)
City State Zip Code
Phone No.
8. PROFESSION OR OCCUPATION
7. MAILING ADDRESS OF APPLICANT (If different from item 6)
City State Zip Code
Phone no.
9. TOTAL YEARS EXPERIENCE IN PROFESSION
10. POSITION TITLE
11. BRIEF DESCRIPTION OF YOUR PRESENT POSITION
12. PREVIOUS HAZARDOUS MATERIALS TRAINING COURSES ATTENDED
TITLES DATES
LOCATION
13. HIGH SCHOOL GRADUATE
YES
D
NO
14. NUMBER OF YEARS EDUCATION COMPLETED BEYOND
HIGH SCHOOL
15. COLLEGE OR UNIVERSITY EDUCATION
NAME OF INSTITUTION
DATE ATTENDED
MAJOR
DEGREE
16. SIGNATURE OF APPLICANT
18. SIGNATURE OF APPROVING OFFICER
19. TITLE
17. DATE
20. DATE
21. AGENCY USE ONLY
AMT. REC'D.
DATE
BILLING INFOR.
Checks should be made payable to: U.S. Environmental Protection Agency.
EPA\271 (Cin) Revised (7-90)
73
------- |