HYDROCHLORIC ACID
AND AIR POLLUTION:

 AN ANNOTATED BIBLIOGRAPHY
 ENVIRONMENTAL PROTECTION AGENCY

-------
         HYDROCHLORIC  ACID
         AND AIR  POLLUTION:
   AN ANNOTATED BIBLIOGRAPHY
    Office of Technical Information and Publications
      Air Pollution Technical Information Center
     ENVIRONMENTAL PROTECTION AGENCY
             Office of Air Programs
      Research Triangle Park, North Carolina
                  July 1971
For sale by the Superintendent of Documents, U.S. Government Printing Office
           Washington, D.0.20402 - Price 66 cents
               Stock Number 5603-0019

-------
The AP Series of reports is issued by the Environmental Protection
Agency to report the results of scientific and engineering studies,
and information of  general interest in the field of air pollution.
Information presented in this series includes coverage of intramural
activities involving air pollution research and control technology
and of cooperative  programs and studies conducted in conjunction
with state and local agencies,  research institutes,  and industrial
organizations.   Copies of AP reports are available free of charge  -
as supplies permit - from the  Office of Technical Information and
Publications, Office  of Air  Programs, Environmental Protection
Agency,  Research  Triangle Park, North Carolina 27711.
            Office of Air Programs Publication No.  AP-100
                                  11

-------
                          CONTENTS
INTRODUCTION	    i
ANNOTATED BIBLIOGRAPHY
     General    	    3
     Emission Sources	    5
     Atmospheric Interaction	   19
     Measurement Methods	   21
     Control Methods	   35
     Effects - Human Health	   51
     Effects - Plants and Livestock	   61
     Effects - Materials	"".	   65
     Effects - Economics	   71
     Legal and Administrative	   73
     Standards and Criteria  	   77
     Basic Science and Technology	   81
AUTHOR INDEX	   93
TITLE INDEX	   97
SUBJECT INDEX	   103
GEOGRAPHIC LOCATION INDEX  	107
                                iii

-------
                HYDROCHLORIC  ACID
                AND AIR  POLLUTION:
         AN  ANNOTATED  BIBLIOGRAPHY
                       INTRODUCTION
    This bibliography contains 164 abstracts of documents and articles
on Hydrochloric Acid.  These abstracts are numbered sequentially on
their upper right corner. The number on the upper left corner is the
APTIC accession number.

    An author index, a title index, a subject index, and a geographical
location index follow the abstracts.  The author index lists all authors
individually.  The first author is indicated by an asterisk (*).  The
indexes refer to the abstracts by the number on their upper right corner.

    All documents abstracted herein are currently on file at the Air
Pollution Technical Information Center, Office of Air Programs,
Research Triangle Park, North Carolina 27711. Readers outside the
Office of Air Programs  (OAP) may seek duplicates of documents
directly from libraries, publishers, or authors.

-------
                            GENERAL
OU212

S. Abe
THE PBESENT STATUS OF AIR POLLUTION.  Clean Sir Heat
Management (Tokyo) 15, (7-R)  7-18, Jug. 1966.  Jap.


The present status of air pollution in Japan is given naming the
kinds of contaminants and their origin, factors affecting
contamination density, and various types of snog.  The types of
contaminants are:  1)  minute particles (less than 1  micron in size)
such as found in soot, carbon, ashes, dust; 2)  coarse particles
(greater than 1 micron in size), as found in dost, ashes, and
minerals; 3)  reactive substances found in nist, fog, and vapor
such as S02,  503, H2S, C02, CO, N02, S203, 03,
aldehydes, BC1, NH3, HF, Pb, Bg, Cd, As,  Be and 3,
4-benzpyrene.  The contaminants originate from  factories, chemical
plants, power stations, domestic heating, public.baths, hotels,
laundries, dry cleaning establishments, hospitals, schools, and
public buildings.  Also discussed are the human factors affecting
air pollution such as public awareness and interest, seasonal,
weekly, and daily changes in heating and cooking.  Meteorological
aspects are covered such as wind direction and  velocity, turbu-
lence, temperature, rain and snov. The types of smog found in New
York, London, Los Angeles, Pittsburgh, and Yokkaichi are
described.  Graphs and tables list symptoms and diseases affecting
plants and humans and give the density of dust  particles and
502 in the main cities of Japan.  Data on the sulfur content
Of various oils produced by Japanese refineries and  on the number
of Japanese automobiles produced is included for information on
emission sources of pollutants.*f

-------
                       EMISSION  SOURCES
15392                                                           2

Bean, Samuel I. and Howard Hall, Or.


ATHOSPHEBIC EHISSIONS FRCM HTDfiOCHLCBIC ACID MANUFACTURING
PROCESSES.  Public Health Service, Eurham,  M.  C.,  National
Air Pollution Control Administration and Manufacturing Chemists
Association, Washington, C. C., Fub. AP-54, 59p.   Sept.  1969.
15 refs.


The basic characteristics of the manufacture of hydrochloric
acid are presented, including growth rate of the  industry,
manufacturing processes, product uses, and the number of
producing plants in the United States.  The Hannhein, Hargreaves,
and taury processes are discussed with respect to their
historical interest, even though the number of plants that use
them is decreasing.  The concentration of hydrogen chloride
emitted to the atmosphere is usually less than 0.5% of the tail
gas volume emitted to the atmosphere.  Emissions  from hydrochloric
acid plants are adversely affected by high temperatures in the
absorption system, improper balance of absorption area and
contact time, faulty equipment, and inadequate tail gas scrubbing
systems.  No correlation exists tetween exit gas  volumes and
plant production rates because of the diverse methods of
production.  However, smaller volumes of exit gas usually show
greater hydrogen chloride concentrations due to the varying
amounts of inert materials in this gas stream.  Thus, the amount
of hydrogen chloride emitted in pounds per ton of acid produced
gives a more accurate description o± the contaminant emissions.
The hydrogen chloride emissions are usually reduced by scrubbing
in a packed tower located behind the process tower.  Rater
scrubbers can reduce the concentration to less than 0.1  pound
per ton of acid produced.  Hydrogen chloride absorption systems
include falling film and adiabatic absorbers.   Other
contaminants such as chloride, chlorinated organic compounds
and other hydrocarbons emitted to the atmosphere  are mentioned.
09275                                                             *

Bohne, Helmut


IHBISSION DAMAGE CAUSED BY HOSPITAL HASTE INCINEPATION.   STAHE
(English translation), 27(10):28-31, Oct. 1967.  « refs.
   CFSTI:  TT 67-51408/10


The strong decolorization and whitening of plants observed in two
gardening nurseries were caused by hydrogen chloride.  In both
cases the sources of emission were refuse incineration plants of
hospitals in which chlorine compounds in the refuse, consisting 80-

-------
90 percent of paper and packaging Baterial, were decomposed
during short periods at a tenperature of 800 -  1,000 deg C.
Erection of chlorine washing  plants appears, therefore, to he
necessary.   (Author's summary)#*
17015                                                            4

Bcndareva, E. H. and V. Z. Yas'kova


HYGIENIC EVALUATION OF A1HOSPHEBIC AIB POLLUTION IN THE VICINITY
OF THE INDUSTBIAL PLANT 'KRASNYI KHIflIK1.  U.S.S.R. literature on
Air Pollution and Belated Occupational Diseases, vol. 8:115-119,
1963.  (E. s. Levine, ed.)
   CFSTI: 63-11570
Air around a chemical plant producing hydrochloric and sulfuric
acid vas analyzed for concentrations of sulfuric acid aerosol
sulfur dioxide, and hydrochloric acid.  The sulfuric acid
concentrations of samples collected 1000 meters fron the plant Here
1300% times above allowable limits.  Maximum HCI concentrations
were found only 200 meters away, and were 1-12 times as great as
allowable concentrations.  At 500 and 1000 meters, HCL
concentrations were minimum but always associated with 502 and
sulfuric acid.  All air samples had high sulfur dioxide
concentrations, particularly those collected in cold, cloudy
weather and on foggy summer days.  Under normal conditions, S03
was present in concentrations from 0.0007-0.6 mg/cu m.  Caged rats
placed within 300 and 500 meter radii from the plant along the
path of prevailing winds showed reduced cholinesterase activity
and reduced vitamin C concentrations in the adrenals.  There was
a slight increase in vitamin C concentration in the liver and
kidneys.
01016

J. S. Carter
CHIMNEY DISPF"SAL OF INDOSTRISI WASTE GASES IN THE  19TH AND 20TB
CFSTURIES.  Public Health Inspector  (London) Vol. 73:005-810,
July 1965.


The history of stacks for dispersal of industrial waste gases in
Great Britain is reviewed.«f
 C984U                                                             «

 Chatfield,  Harry E.


 PESIN  FETTLES.    In:   Air Pollution Engineering Manual.  (Ait
 Pollution Control District, County of Los Angeles.)  John A,
 Danielson (coop, and  ed.). Public Health Service, Cincinnati, Ohio,
 National Center for  Air Pollution Control, PHS-Pub-999-AP-OO, p.
 681-688, 1967.
    GPO:   80fi-61«-30
                  HYDROCHLORIC ACID AND AIR POLLUTION

-------
ftspects of resin (plastic) production such as chemical reactions,
reaction conditions, equipment, and operating procedures are
discussed for phenolic, amino, polyester, and alkyd, polyurethane,
polyvinyl, polystyrene, and petroleum and coal tar plastics.  The
principal air contaminants and sources of emission from resin
manufacturing operations are tabulated.  The usual emission control
equipment types are cyclcnes and spray toners for particulates, and
reflux condensers and water scrubbers for solvent fumes.


02234                                                            7
CHBHICAL INDOET?Y FEPOFT  (PFVISED INFORMATIVE REPORT HO. 1).
J. Air Pollution Control  Sssoc.   (TI-2 Chemical
Committee). 13,  (10) H96-9, Oct.  1963,


The chemical industry uses raw materials from mine, forest, sea,
air, and farm; from oil, brine and gas wells; and from by-product
materials of many other industries.  It converts these widely
diversified raw materials into more than 8,850 compounds, called
"end chemicals," in more than 12,000 plants operated by hundreds
of chemical manufacturers.  Since World War II the chemical
industry has become so diversified that it is difficult even
to classify it accurately.  Today, petroleum producers are now
important chemical manufacturers; paper companies, rubber
companies, even manufacturers of electrical machinery and farm
equipment are chemical producers.  This report will discuss in
general terms some of the characteristics of emissions from certain
kinds of operations and the relation of the plant operators to
the Air Pollution Control Officials.**
18027                                                            S

Cornish, Herbert H. and Ellen L. Abar


TOXICITY OF PYECIYSIS PBCDOCTS OF VIBYI PLASTICS.  Arch. Environ.
Health, 19(1):15-21, July 1969.  12 refs.


Polyvinyl chloride polymers and formulations were pyrolyzed in a
stream of air by gradually raising the temperature from ambient
to approximately 600 C.  The pyrolysis air stream was diluted
with twice its volume of room air, and rats*were exposed to it.
Exposure to an air streaa containing the pyrolyzed products of 1
to 2 gm of polyvinyl chloride polymer resulted in the death of
50 percent of the animals.  Host deaths were due to carbon monoxide
(CO), and carboxyhenoglcbin (COHb) levels correlated well with the
amount of plastic pyrolyzed.  little histological evidence of lung
damage was evident.  When oxygen  (02) was added to the air stream
to prevent deaths frcn CO, pulmonary edema and interstitial
hemorrhage developed.  The lungs of some animals exposed to high
levels of pyrolysis products of vinyl chloride-vinyl acetate
copolymer also shoved focal edena and intra-alveolar hemorrhage.
Polyvinyl chloride formulations, containing additives and inert
materials, were in general less toxic per gram of sample pyrolyzed.
(Author's Abstract)
                           Emission Sources

-------
16521                                                             9

Tokyo Hetropolitan Government, Japan, Public Nuisance Control Div.


THE EMISSION SOOECES OF HCI ASE SH3 ADD THEIR STANEARD CONTROL
EQUIPMENTS.  (Enka suisc cycbi anmonia no hasseigen to sono
hyojun jogai shisetsu ni tsuite).  Text in Japanese.  Kogai to
Taisaku (J. Pollution Control), 2(7):461-166, Sug. 15, 1966.


Hydrogen chloride is emitted by plants which produce pigments,
dyes, industrial chemicals, medical supplies, and treat metal
surfaces.   Ten to 50 ppm HCI does not prohibit work, but is
harmful to the teeth, nose, macosa of the mcuth, and face
after long exposure.  No one can work in air containing 50-100
ppm HCI.  Ammonia is emitted by plants which produce pigments,
manures, and medical supplies.  Odot is noticed when the
concentration reaches 100 ppm KH3.  Chronic exposure to UOO
ppm NH3 is harmful to the tnucosa.  Exposure to concentrations
of 2500-6500 ppm NH3 for 30 minutes is dangerous, and exposure to
concentrations of 5000-10,000 ppn NH3 quickly causes death.
Hydrogen chloride and NH3 can be removed by absorption,
adsorption, chemical reactions, and oxidation.  Hydrogen
chloride and NH3 dissolve easily in water which provides
another suitable method for control.  The water washing method
is divided into a packed column, sp-ray column, venturi scrubber
and jet scrubber.  The washing equipment consists of an air
blower, a cleaning column, a pump, a water tank, and an exhaust
pipe.  The parts which come into contact with the gas must be
constructed of an acid-alkali proof material.  A mist catcher
must be installed on top cf the packed column.  The hood must
be carefully designed so the excess air is not inhaled.   (Author
abstract modified)
10748                                                            10

Fenimore, C. P.,  and G. W. Jones


COMPARATIVE YIELDS OF SOOT F*OM PREHIXED HYDROCARBON FLAMES.
Combust, and Flame, 12 (3):196-200, June 1968.


Ethylene and acetylene gave eight tines more soot when burnt with
oxygen.  The comparison was made in flames having the sane
temperature, and about the same pack concentrations of species froa
which the soot is supposed to grow (hydrocarbon radicals, acetylene
and polyacetylene).  we suggest that more effective oxidation of
the soot aggregates, particularly during their early stages of
growth occurred in oxygen flames, and this decreased the yield.
Hydrogen chloride added to acetylene-oxygen flames increased the
yield of soot without increasing the concentrations of
polyacetylenes..  Here too, the yield may have been altered mainly
by changes in the oxidation of the early soot aggregates.
(Ruthors1 abstract)ft
12410                                                            11

Gorfcan1, 6. K, and  V. D. Yablcchkin



8                HYDROCHLORIC ACID AND AIR POLLUTION

-------
OH THE QUESTION OF IMPROVING SCHE PCIYVINYL CHXOEIDE POIYMEBS AHD
A HETHOD OE IHPHOVIHG THEIE TOXICITY.  Kosmich.  Biol. tied.,  1(2):
47-51, Harh-April 1967.   11 refs.  Translated from  Russian by
E. Barter, Foreign Technology Div., Bright-Patterson AFB, Ohio,
Translation Div., Sp.,  April 15, 1968.
   CFSTI.BDC: AC 680924


Polyvinyl chloride insulation tapes are  used to  equip airtight
closed spaces of snail  dimensions and the cabins of spaceships
with electronic apparatuses.  A method was developed for improving
the polyvinyl chloride  tapes for the purpose of  decreasing their
gas emanation.  The overall gas emission or organic substances
from the improved specimens cf polyvinyl chloride tapes as a
result of the treatment  with 505? urea solution was  reduced by a
factor of 1.5.  The improved polyvinyl chloride  tapes gave off
volatile chemical substances in small concentrations, which  with
long duration of their  action on the organism cause only a weak
biological effect.  As  a  result of the treatment with a solution of
urea, there was an improvement in the electrical insulation
properties of the polyvinyl cblcride tapes serving  the purpose for
which the materials were  intended without change in their strength
characteristics.  The following gases are emitted from polyvinyl
chloride tapes: aldehyde, carbon dioxide, dibutyl phthalate, fatty
acids, carbon monoxide,  hydrocarbons, hydrogen chloride, and
organic chlorine compounds; their concentrations are recorded.


09799                                                            12

Hammond, William F.   and Herbert Simon


SECONDARY ALUMTNOH-HEITING PPOCESSES.  In:  Air  Pollution
Engineering Manual.    (Air Pollution Control District, County
of Los Angeles.)  John A. Danielson (comp. and ed.). Public
Health Service, Cincinnati, Ohio, national Center for Air
Pollution Control, PHS-Pub-999-AP-40, p. 284-292, 1967.
   GPO:  806-614-30


The secondary aluminum melting process is described in detail
indicating the type of furnaces used, charging practices, pouring
practices, and fluxing.  Frequently a large part of the material
charged is low-crrade scrap and chips.  Paint, dirt, oil, grease,
and other contaminants from this scrap cause larqe  quantities of
smoke and fumes to be discharged. Even if the scrap is clean, large
surface to volume ratios require the use of nore flaxes which can
cause serious air pollution problems. The emissions f^rom aluninun
fluxing may consist of hydrogen fluoride, hydrogen  chloride,
chlorine in the gaseous state, aluminum chloride, magnesium
chloride, aluminum fluoride, magnesium fluoride, aluminum oxide,
magnesium oxide, zinc chloride, zinc oxide, calcium fluoride,
calcium chloride and sodium chloride in the solid state.  Because
of the. widely divergent properties of these air  contaminants the
problem of control is complicated.   A canopy hood is usually used
for capturing the emissions from the charging well  of aluminum
reverberatory furnaces. Calculation of the quantity of air required
can be accomplished as shown in an example.  Some type of scrubber
is required to remove the soluble gaseous fraction  of the effluent,
and either a baghouse or an electrical precipitator is needed to
control the solids.   In order to Maintain adequate collection
efficiency, the use of high efficiency scrubbers with a caustic
                           Emission Sources

-------
 solution  as the  scrubbing  medium  has  been  found  necessary.  Typical
 test  data on  collection  efficiency  for  both  ordinary and  high-
 efficiency scrubbers  are outlined.  Average  collection  efficiencies
 obtained  on various devices  on  emissions from chlorinating aluminun
 are outlined.  The devices are  horizontal  multipass wet cyclone,
 single-pass wet  dynamic  collector,  packed-column water  scrubber
 with  limestone packing,  ultrasonic  aggloraerator followed  by a
 nultitube dry cyclone, and an electrical precipitator.  The trend
 in control equipment  for aluminum-fluxing  emissions appears to be
 away  from electrical  precipitators  and  toward the scrubber-baghouse
 combination.

 20616                                                            13

 Hirayana,  Naonichi, Kazuo  Hishida,  sadao Konno, and Toshio Ohira


 A RESEARCH ON THE REFUSE INCINERATORS IBCM THE VIEWPOINT  OF SMOKE
 PROPERTIES.   Bull. JSHE  (Japan  Soc. Been.  Engrs.), 11(47).:902-912,
 1968.  4  refs.


 Operating conditions, type of refuse  burned, concentrations of
 noxious flue  gas components, and  the  amount  of dost and fly ash
 in flue gases were determined for 15  municipal and private
 incinerators  in  Tokyo.   Integrated  test results are tabulated and
 evaluated in terms of incinerator design criteria.  Concentrations
 of hydgrogen chloride were high where rubbish was burned, sometimes
 reaching  2000 ppm in  emissions  from department store incinerators.
 This  amount renders furnace  design  almost  impossible due  to the
 .metal corrosion.  The concentration of  HC1 in the flue  gas of
 municipal incinerators is  usually less  than  200 ppm, so attention
 should be paid to high temperature  incineration and stress
 corrosion of  metals.  The'total of  sulfur  oxides in flue  gas fro»
 incinerators  is  less  than  100 ppm.  Ammonium is not produced by
 rubbish combustion, and  that produced by garbage combustion can be
 substantially reduced by high-temperature  incineration, as can
 concentrations of aldehydes.  Temperature  has no effect on organic
 acids, the total content of  which is  usually less than  100 ppm,
 but high  temperatures  (above 900  C) produce  increased
 concentrations of nitrogen dioxides.  The  dust and fly  ash content
 in the flue gas  of continuous combustion incinerators are nearly
 equal to  that of the  batch comtustioo type.  The ash content can
 be controlled by retaining the  ash  on the  afterburning  grate for
 a sufficient  period of time.  flith  respect to dust, dry collectors
 are perferable -for refuse  incinerators.
02236                                                            14
HYDROCHLORIC flCTD MANUFACTURE, REPORT NO. 3.   J. Bar
Pollution control Assoc.  13,  (10) 502-5,7,  oct.  1963.(TT-2
Chemical Committee.)


This report, published as Informative Rpt. Bo. 3  of the Air ,
Pollution Control Association's TI-2 Chemical Committee ,    j
represents the "best thingking of the Association" on  the
subject.  The manufacture of  hydrochloric acid involves the
generation of hydrogen chlorid gas and its absorption  in water
10               HYDROCHLORIC ACID AND AIR POLLUTION

-------
for the aqueous solutions.  There are three principal  processes
used to produce hydrogen chloride:   .(1) Beaction of salt and
H2S04  (Hahnheim Process) resulting in the production of
hydrogen chloride gas and sodium sulfate; (2)  Burning  chlorine in
a slight excess of hydrogen;  (3) As  a by-product froo
chlorination of organic compounds.   Op until the early thirties
nore acid was made by the salt-acid  process; by  1961 the hydrogen-
chlorine process was nore in  use.  Air pollution aspects of the
processes are reviewed.**
19325                                                           IS

Konda, Kiyoshi, Hisao Ito, and Atsuhiro Hooda


FIELD EVALUATION OF EXHAUST GAS FEOB KEFDSE I8CIN1BAT08 RELATED TO
AIR POtlimON ABB -HETAL COBBOSICB.  Irans. Soc. Heating,
Air-Conditioning, and Sanitary Engrs.  (Japan), vol. 7:95-104,
1969.


A study of municipal incinerator exhaust gas composition conducted
at five sites-in .Japan is described.  The study was undertaken to
obtain information on odor and metal corrosion problems.  The
exhaust consisted of sulfur oxides, nitrogen oxides, ammonia,
sulfuric acid, nitric acid, organic acids, and hydrochloric acid.
Volatile organic acids and hydrochloric acid are mainly
responsible for the corrcsion, with sulfuric and nitric acids only
partially concerned.  .Percentages of exhaust products as A
function of raw refuse input are tabulated.  Continuous firing
rather than batch firing would limit noxious effluents.
Temperature and excess air control would also -help.  After=turning
chambers should be installed tc further reduce contaminants.


01741                                                            16

E. Bastromatteo


HEALTH ASPECTS IN FIRE FIGHTING  (PAST  1).  Firemen 33,  (6)
20-1, Aug. 1966.


In .the course of their work, fire fighters are exposed to a
variety of toxic fire qases and other adverse health factors.
Quite often they are required to enter buildings, confined spaces,
and other places where they nay be exposed to extremes of heat, to
smoke, to oxygen lack, and to toxic gases created by the combustion
process.  The physical exertion, excitement and anxiety involved
in many -fire situations add to- th« -health problems -by increasing
the breathing and heart rates.  Fire fighting therefore can
place severe demands on the respiratory, cardio-vascular and
nervous systems.  Some of the chief health hazards encountered in
fire fighting are discussed.  Reference is also made to a
special study of heart and lung disease in fire fighters.  (Author
summary) ft


11438T                                                           l7

Boegling, E.
                          Emission Sources                           n

-------
 PRACTICAL  ASPECTS  OF  DEFUSE  INCINERATION  ON  THE  EXAMPLE  OF
 FSSENKARNAP.    {(Praxis  der  7entralen  Mullverbrennung  am
 Beispiel Essen-Karnap.))   Translated from German.
 Brennstoff-Waerme-Kraft,  17 (R):383-391, Aug.  1965.   2  refs.


 Various aspects  involved  in  the  planning  of  refuse  incineration
 plants are discussed.  Detailed  data of the  Essen-Karnap power
 plant which serves a  very wide area of refuse collection, are
 given.  This  plant is the largest  refuse  incineration  plant
 existing at present.   It  has a capacity of 2000  tons of  domestic
 and  industrial refuse and 2000 tens of sludge per day.
 Performance data,  components of  the refuse power plant,  supply and
 storage facilities for household refuse,  dischargino of  refuse,
 refuse transportation and loading, incineration  of  used  oils, slag
 transportation and treatment,  ami  furnace operation are  described.
 Simultaneous  co-incineration of  high-calorific value industrial
 refuse is  being  attempted experimentally.  A large  portion of the
 acifl-fcrming  ingredients  undergoes chemical  reaction with the
 refuse slag and  fly ash  originating from  powdered coal firing,
 thereby reducing the  emission of S02,  303, HC1,  etc. into the
 flue gas.   The aim is to  establish a ratio of industrial wastes to
 domestic refuse  which will provide the desired flue gas
 composition.  At present  refuse  to be  incinerated must contain
 less than  1%  sulfur.**
195C4                                                            18

Hozan, C. , A. Lacguaniti, and 1. Pettinati


EVALUATION OF THE "TSK FPESENTEE E¥ INDUSTRIAL POISONS.
(Evaluation du risque induit par les toxiques industriels).  Text
in French.  Arch. Maladies Profess. Bed. Trav. Securite Sociale,
31(3):141-1H6, March 1970.


The determination of the actual concentration of a pollutant in
air leads to accurate, reproducible results only when certain
factors that affect it are taken into account.  Thus, as in
processing a sanple of polluted air, the pollutant must be absorbed
completely by the absorbent used in its determination.  It is
essential to know that the bubbling rate of the air sample through
the absorbent liquid has a significant effect on the amount of
pollutant absorbed in the process.  A potential source of
incorrect interpretation of results cf perhaps otherwise
accurate measurements is the assumption of a uniform distribution
of the pollutant throughout a given enclosed space while its actual
distribution is nonunifora.  These two findings and those to
follow are illustrated by results of measurements of concentrations
in air, in ng/cu m of hydrochloric ar,d hydrocyanic acids,
ammonia, sulfur dioxide, and trichlorethylene.  Another important
factor was discovered after a small hermetically sealed test room
had been constructed for experiments in an atmosphere with known
pollutant contents.  Their measured actual contents in the
test-room air were appreciably smaller then the theoretically
expected ones.  Analogecus results were obtained when air' samplers
were taken by'..small Draeger tubes and when the masonry walls!of
the test room were replaced by walls made of aluminum sheets!  That
some of the pollutant introduced into the air of the roon is
deposited on the walls was fully confirmed by a test in which an
12               HYDROCHLORIC ACID AND AIR POLLUTION

-------
aluminum plate of known surface area was attached to the wall and
the amount of pollutant deposited on it during the test was
determined analytically.  When 'flushed1 with fresh air this amount
progressively decreased, as expected.  Such 'contaminated* walls
may act as secondary sources of air pollution.


06298L                                                           19

Bureau of Bines, Pittsburgh, Pa., Coal Research Center.
(1966).  pp. BH/41-BW/50.


POLLUTION BY CHLORINE TN COAL COMBUSTION.  (SECTION 7 OF AIR
POLLUTION RESEARCH PBOGBFSS HEPORT FOR QUARTER ENDBD DECEMBER 31,
1966.)


The ash content in coal is undesirable.  Hot only is it a
diluent of the coal substance, but at the temperature of coal
combustion some of the more volatile components are released
to contaminate the combustion products.  The interest in the
contribution of chlorine to contamination of flue gas has been
considerably less than the sulfur compounds,  it was known
that high-chlorine coals when carbonized cause attack on
refractories and when burned cause fouling of high-temperature
heating surfaces.  The chlorine content of American coals range
from 0.01 to 0.5 percent, whereas English coals run as high
as 1 percent.  Western coals contain no chlorine; chlorine is
confined to central and Appalachian coals—closer to our
large urban centers.  Tn burning coals containing chlorine a
serious pollution hazard exists.   Assuming that, an 800-NW power
plant is burninq a 0.2 percent chlorine coal, 11,00.0 standard
cubic feet an hour of hydrogen chloride are discharged fron the
stack each hour or U,560 tons each year.  If chlorine in coal
is a possible pollutant, the nature of the chlorine compound in
the coal should he known, as well as the transformations
occurring during the coal-ccmbustion process.  This
information is necessary if one is to consider techniques in
the removal of the chlorine content before or after combustion.
The concentration of hydrogen chloride is, however, dependent upon
the degree of volatilization of the sodium, from the ash, as
sodium chloride.**


20564                                                            20

Reh, L.


IKCINEBATIOS AND THERMAL CRACKING OF 1ICOID AND PASTEODS REFUSE.
(Verbrennung und thermische Spaltung fluessiger und
schlamnfoermiger Industtie-Sbfa'lle) .  Chem. Ing. Tech.
39 (
-------
water content; the mineral substances; and corrosive compounds,
The most common types of furnaces (such as combustion chambers,
story of fluidized bed furnaces) are surveyed, and their
design, node of operation, and field of application are
discussed.  Most incinerator plants use both combustion and
thermal cracking.  The legal requirements of total residueless
combustion of all tcxic organic components demand combustion
temperatures of at least 800 C in the actual combustion zone of
the furnaces.  Hith many residues, this temperature cannot be
reached without auxiliary fuel.  A rotary burner, spray burner,
an atomizing nozzle, a story furnace, and a fluidized bed furnace
are illustrated.  The fluidized bed incineration with a turbulent
layer of inert material may be also.used for thermal cracking of
waste sulfuric acid from inorganic or organochemical plants.  The
waste acid concentrated to an acid contents of «15$ (including
solid substances, mostly sulfates) is pumped into the turbulent
layer of sand, heated by an auxiliary burner, and cracked to
water vapor, 02, and S02.  The sulfates are converted to oxide,
and organic substances are incinerated.  She spent hydrochloric
acid and iron chloride containing pickling baths are
thermally cracked.
•HUSH                                                          21
REMARKABLE MEASURES FOR 1HI IMPROVEMENT OF SIB QUALITY.
(Eeachtliche Massnahuen zur Verbesserung der Luft).  Text in
German.  Sasser Luft Eetrieb, 14 (1) :33-36, Jan. 1970.


In 1967, a total of ft million tens of sulfur dioxide were emitted
from industrial sources, particularly power plants.  Until 1975,
an increase to 5 Billion tons is anticipated; from then on, the
S02 emission will stagnate and eventually decline, due to the use
of nuclear power.  Contrary to this downward trend, fluorine,
chlorine, hydrocarbons and numerous odorous pollutants are on an
upward trend, due to the expanding chemical industry.  In the
metallurgical industry, the sinter capacity has been doubled; thus,
the larger units will emit HC1 and larger quantities of gaseous
fluorine compounds along with SC2.  It is estimated that sintering
plants presently already emit as much fluorine compounds as the
aluminum plants.  No fluorine removal method from the waste gases
of the ore sintering plants is yet available.  Traffic will
further increase, as well as vehicle emissions.  Emissions by
domestic heaters will decrease because electric or central heating
will take the place of old coal or oil fired heaters.  To combat
the increasing pollution of air by an overall increase of
emissions, the state of North-Rhine-Hestphalia plans to establish
emission inventories.  Such inventories have been made in the
area around Cologne; ether large cities will scon follow.
11123                        .                                   22

little  (irthor D.) Inc., Cambridge, Mass.


RESEARCH ON CHEMICAL ODCES.  PART I — ODOR THRESHOLDS FOB 53
COMMERCIAL CHEMICALS.  Manufacturing Chemists Association,
Washington, D.C., 26p. , Octo. 1968
14                HYDROCHLORIC ACID AND Al R POLLUTION

-------
The odor thresholds in air of 53 industrial chemicals  were
determined by panel test.  The odor  threshold concentrations  for  the
chemicals studied are tabulated in this  report as an alphabetical
listing and by increasing threshold  concentrations.  All
concentrations are calculated as parts per million by  volume.  These
values are reported fcr 50 percent and 100 percent (two and four
members) panel recogniticn. Based on our experience in odor
measurement, it is recommended that  the  concentrations given  for  100
percent recogniticn should te considered as the  recognition
threshold values.  The spread between 50 percent recognition  may  be
indicative of the individuality cf the odor type as well  as the
constancy of the data obtained.  With 27 of the  sanples examined,  50
percent recognition was equal to the 100 percent recognition
concentration, while in 23 instances the 50 percent recognition was
once concentration interval lower than the 100 percent recognition.


11087                                                             23

Bispoli, Jose A.


FIGHT AGAINST AIK POLLUTION IK ABGEB1INA EDOCATIONAL, LEGAL
AND TECHNOLOGICAL ASPECTS.   Preprint, Tecnica de Higiene
(argentine), 20p.,  June 1968.   31 refs.


air pollution is an increasing problem in the Argentina cities of
Buenos Aires, fiosario,  la Plata and Har del Plata,   Air
pollution control measures are not keeping pace with the growth of
industries,  which are often located in neighborhoods of
populated areas.   The Buniciple Director of Hygiene
supervisors the problems of automotive emissions and
industrial and domestic emissions.  About one million vehicles
travel daily in Buenos Aires.   Traffic throughfares are being
modified in order to eliiinate congested traffic areas.  The
Director of Hygiene studies daily the chemical control of the
pollutants of hydrocarbons, carbon monoxide and sedimented
particles.  The "Argentina Association for Air Contamination
of sanitary education on all levels for  the population.#t
08816                                                            •?*

Pose, Gerhard

KILL TRASH REMOVAL BF A MARKETING FACTOR FOR THE GLASS CONTAINER
ISDUSTBY AND PRODUCERS OF OTHER PACKAGING MATERIAL?    ( (Wird die
Abfallbeseitigung zu einem Harktfaktor fur die Verpacfcmngsglas-
industrie und die Hersteller anderer Verpackungsmittel?  Text
in German.  Glastech. Ber., HO(11):«38-tt38, Nov. 1967.

While the removal of discarded glass containers presents a pro-
blem, it is not insurmountable, particularly if refuse crushing
plants and techniques are developed which will refuse the silicon
from waste glass.  The substitution of plastic packaging materials
for glass has the disadvantage that during incineration of poly-
vinyl-chloride-containing material, corrosive gases are evolved,
which cause severe damage to the boiler units of the incinerator
plant.  Furthermore, the emission of hydrochloric and hydrofluoric
acids from these plastics causes dangerous air pollution to such an
extent, that in the United States the incineration of plastic
waste is forbidden in the vicinity of large cities.*f
                          Emission Sources                           15

-------
16735                                                            2S

Russell, «. E.


AIR POLLDflCH AND CHEMICAL INDUSTRY..  Clean iir  (J. Clean Air Soc.
Australia Ne.w Zealand), 3(1):15-23, 25, Harch  1969.   17 refs.


Sources of air pollution from the chemical industry in New
Zealand are discussed.  Noxious or offensive gases, liquid
droplets or fumes, smokes or participate matter, and dust must
be controlled.  Methods available for dealing  with waste gases are
discussed and examples are given that demonstrate that
improvements in plant efficiency have greatly  reduced air
pollution.  Recovery systens, principally for  S02, are described.
A brief summary is nade of theoretical predictions for dispersion
where other methods have failed.

C8517                                                            2fi

Saunders, R. A.


CHLOBINATED HYDROCARBONS IN ClOSED-ENVIRONMEST ATBOSPHEBES.   In:
A. L. Alexander and V. B.  Piatt, The Present Status of
Chemical Research in Atmosphere Purification and Control on
Nuclear-Powered Submarines (Fifth Annual Progress Feport),
Naval Research Lab., Washington, D. C., NRL-6491, p. 8-11,
Jan. 11, 1967.  6 refs.
     CFSTI, DDC:  AD 648505


Methyl chloroform and other Icv-toxicit; chlorinated solvents have
been used in closed submarine spaces in considerable quantity,
with subsequent deleterious effect on equipment.  Analysis of some
commercial grades of methyl chloroform has shown the presence of
appreciable quantities of other more toxic chlorinated hydro-
carbons.  The relatively high concentrations of these components
may raise the toxicity of the commercial solvent mixtures above
that of pure methyl chloroform.  It is obvious that the use of
technical grade solvents in closed atmospheres can add several
unsuspected and perhaps undesirable contaminants to the atmosphere.
Exposure of a crew to trichlcrcethylene, and the symptoms shown
subsequent to decomposition of the trichloroethylene are described.
Since methyl chloroform is known to decompose  under certain con-
ditions of passage through a submarine CO/H2 catalytic burner,
with the formation of additional chlorinated hydrocarbons and
corrosive hydrochloric acid, and since some of the chlorinated
hydrocarbons so formed might possibly react to yield more toxic
substances, the use of chlorinated hydrocarbon solvents should be
prohibited in closed environmental atmospheres, where catalytic
burners and alkaline materials form part of the air-purification
system.
08583                                                            23

Schiemann, G.


RESULTS OF EMISSION MEASUBEMESTS FfiCB COMMUNITY IHCINEBATOKS.
((Ergebnisse von Emissionsmessungen an Verbrennungsanlagen fuer
Siedlungsabfaelle.))  Text in German.  Erennstoff-Haerme-
Kraft (Berlin) 19 (9) :440-4i»3, Sept. 1968.  3 refs.
                 HYDROCHLORIC ACID AND AIR POLLUTION

-------
The dust and gas emissions of one large and 47 snail and medium
incinerator-plants in. Duesseldorf and Cologne were measured and
compared.  In 75S of the snail and medium plants which en ployed
various control methods the snoke  plume was under the limiting
value,- while the dust discharge exceeded the standard.  These
results showed that poor dust control rather than the incineration
itself was at fault.  After various alterations, the small and
medium, plants.. were- able to. meet., the dust emission stnadards.  Dust-
emission in the smaller and medium plants before alterations was 4
kg./hr. for 2.5 t./hr. of refuse, while a large incinerator plant
equipped, with a roller grate and oil furnace, and electrostatic
precipitators, showed only 3.2 kg./hr. dust emission for 20 t./hr.
of refuse.  The highest S02 eaissicn was 1.5 g./cu m, only
traces fo S03 were found, and the hydrochloric acid content of
the stack gas was 0.1-1.1 g./cu m.  It was concluded that when-
ever possible, the Bore economical and safer large incinerator
plants should be constmcted.it

00030                                                           -2&

H. S. Smith


ATHOSPHEBIC EMISSIONS FROH FOSL OIL COBBUSTION (AN INVENTORY
GUIDE) .  Public Health Service, Cincinnati, Ohio, Div. of
Air Pollution, (999-AP-2.)  Nov. 1962.  102p.


This review provides a guide for the inventorying and control of
emissions arising from the combustion of fuel oil.  Information
was collected from the published literature and other sources.
The report is limited to information on oil used as a source of
heat or power (exclusive of process heaters) .  The data were
abstracted, assembled, and converted to common units of
expression to facilitate understanding.  From these data, emission
factors were established that can be applied to fnel oil combustion
to determine the magnitude of air-contaminating emissions.  Also
discussed are the compositions of fuel oils; the preparation and
combustion of fuel oil; and the rates of emission, their variables,
and their control.  (Author)**
Stahl, Quade R.


PREIIHINAEY AIR POLIOTIOB SURVEY OF HYDEOCHIOEIC ACID:   A
1ITERATUB.E— HEYIE8.. . . Litton Systems, Inc., Silver Spring, Hd.,
Environmental Systems Div., Contract  PH 22--6a-25,  HAPCA Pub.
APTD 69-36, 69p., Oct.  1969.   117 refs.
   CFSTI:-- PB.-188063


Prolonged- exposure- to. lew concentrations of  hydrochloric acid  can
cause erosion of teeth,  while  severe exposures can  result  in
pulmonary edema and laryngeal  spasm.  Recent data indicate that
hydrochloric acid is also a stronger phytotoxicant  than  reported
in earlier literature.   The acid is strongly corrosive to  nost
metals.  In the United  States,  hydrochloric  acid is produced as a
by-product- of the chlorinaticn of. organic compounds,  processes
involving the reaction  of common salt with sulfuric acid,  and  the
chlorine-hydrogen synthesis process.  However, atmospheric
                          Emission Sources                           17

-------
emissions of the acid result fxo» a large nunber of sources other
than its manufacture and use.  These include heating or burning ot
chloride-containing materials in the presence of organic compounds
or other hydrogen-containing ccnpcunds.  The high solubility of
hydrogen chloride in water and the low vapor pressures of even 20X
hydrochloric acid solution make collection of hydrogen chloride in
Hater an effective and inexpensive method of control.  Packed
tower absorption systems are rapidly being replaced by cooled
absorption systems consisting cf either a ccuntercurrent or
co-current flow of gas and water.  By the use of two or more towers
in a series, emissions can be reduced to 0.1 to 0.39 by volume.
Other systems effective for the control of hydrochloric acid or
hydrogen chloride emissions are the rotary brush scrubber and the
ejector venturi scrubber.  Collection efficiencies for these
systems can reach 995E.


09011                                                            3D

nenzl, Herman P. J.,  and 0. V. Ingruber


PRINCIPLES BHIV PRftCTTCFS OF KPAFT BIRCK LIQUOR EVftPORRTIOS. Paper
Trade J., Vol. 150, p. 51-56, Nov. 28, |966.  16 refs.


The properties of black liquor are discussed in relationship to the
multiple effect, thermal compression and Bergstrom-TrobecJc
evaporation processes.  The problem of scaling during evaporation
and the removal of such scales is also discussed.
18               HYDROCHLORIC ACID AND AIR POLLUTION

-------
                  ATMOSPHERIC INTERACTION
11479

Cusev, -H, I,,  and R. S, Si,U4«wis*iolJ-aT  8, K, Bai-fcov,-
and E. V. Elfimova
DETESHIHATIONS OP THE COMBINED EFFECT OF TOXIC SUBSTANCES IN
PREDICTIONS OF ATHOSPHEFIC POLLUTION.   ((Ob uehete sunaarnogo
deistviya tokischeskiJch jreshchestv pri -pcognozitovanii
zagryazneniya vozaushnogo basseina.))  Hyg. Sanit.  (English
translation of:  Gigiena i Sanit.), 33 (1-6):88-80, April-June
1968.  ((17)) refs.
   CFSTI:  TT 68-50449/2


Several investigations of the combined effect of several
pollutants present simultaneously in the atmosphere have been
recently made.  The results ace listed. ^Th«- 4ata provide
convincing proof that as a rule the combined effect of toxic
.substances in the atmosphere at the levels of lininal and
subliminal concentrations are in accordance with the principle
of simple summation.  Data from many specialized institutes and
organizations suggest that in most cases calculations of the
expected atmospheric pollution are based on the maximum permissible
concentrations established for individual pollutants, so that the
results of mathematical determinations are compared only against
such standards.—T-here is a definite gap between theory and
practice in the establishemnt of standards for atmospheric
pollutants and the application of its recommendations.  It is a
natter of common knowledge that the implementation of the necessary
hygienic measures at an operating enterprise is undoubtedly more
complex and difficult than the prevention of marked air pollution
at the planning stage.  All these considerations point to the
necessity for the planner to take account of the complex effects
on man of any combination of industrial pollutants discharged into
the atmosphere.  The results cf comprehensive investigations
of the reflex effects produced by combinations of substances and
the largely uniform findings of such investigations make it
possible -to--reconmeod, -with-a high degree of reliability, -that for
practical predictive purposes the approved formula for calculations
of combined effects should be extended to all combinations of
substances present in discharges from a specific industrial
enterprise or a complex of enterprises.**
-04246

F. D. Krivoruchko
 DETERHINATIOS  OF  AERIAL  COHCENTBATIOH  OF  DECOMPOSITION  AND
 OXIDATION  PRODUCTS  OF  CERTAIN OR 6 A NO ALB HI SOB COMPOUNDS  fTEA,
 DEAC, TIBA,  AND DIBAC) .    (Opredelenie produktov

-------
razlozheniya i okisleniya v vozdukhe nekotorykh
alyuminiiorganicheskikh soedinenii  (TEA, DEAKh, TIBS i DIB-
AKh.)  Hyg. Sanit. 31,  (8) 256-9, Aug. 1966.  *uss.  (Tr.)
   CFSTI:  TT 66-51160/7-9


In .connection with studies of working conditions in the
manufacture of triethylaluninum  (TEA), diethylaluminum chloride
(DEAC), triisobutylalumimiu (TIBA) and diisobutylalnminum
chloride (DIBAC)  it was necessary to determine health hazards in
the factory air.   Determination in air of substances formed by the
decomposition and oxidation of TEA, DEAC, TIBA and DIBAC
formed the purpose of the present work.  Organoaluminum compounds
in sealed glass ampules were used.  Investigations were performed
in 100 1 chambers with a fan for uniform distribution of the
decomposition products from orqanoalumimum compounds.  The
ampules with samples were broken with a special rod.  The
breaking of an ampule was followed by the formation of a white
aerosol in the chamber  (obviously, aluminum oxide) which persisted
for 1.5-2.5 hr and then was slowly deposited on the chamber walls.
Air samples were taken from the chamber at different time
intervals (from 2 rain to 3.5 hr).  Aluminum oxide aerosols were
sampled on an ashless filter paper of "Blue Band" grade in a
Plexiglas cartridge.  Samples for other toxic substances were
taken by menas of absorbers, placing filter paper in front of the
absorber in order to exclude aluminum oxide.  Investigations
showed that the processes liberated aluminum oxide aerosol,
isobutylene, lower and higher alcohols, aldehydes, carbon monoxide
and hydrogen.  Moreover, the decomposition and oxidation of
DIBAC yielded hydrochloric acid aerosols while the decomposition
and oxidation of DKAC yielded ethyl chloride.##
20                HYDROCHLORIC ACID AND AIR POLLUTION

-------
                   MEASUREMENT  METHODS
08139                                                           33

Alekseyeva, M. V.  and B. V. Elfimova


FRACTIONAL DETERMINATION OF HYDEOCHtOBIC ACID AT5POSOL AND OF
CHLORIDES IN ATMOSPHEBTC AIE.   In:  Survey of O.S.S.R.
literature on Air Pollution and Belated Occupational
Diseases.  Translated from Russian by B. S. Levine.
National Bureau of Standards,  Washington, D. C., Tnst.  for
Applied Tech., Vol. 3, p. 31-33, May 1960.
   CFSTI:  TT 60-21475


A method for the determination of hydrochloric acid  aerosol in the
presence of chlorides has been developed.  To accomplish this,
hydrochloric acid was determined by micro-titration  and chloride
ions nephelometrically; chloride gas was then calculated fron the
two values.  The determination of hydrochloric acid  aerosol in the
air is complicated by the presence in the air of other acid
aerosols, sulfuric acid aerosol in particular.  The  procedure to
avoid the loss of RCI, in the presence of H2S04 is presented
also.  The method was used in analyzing 37 samples of atmospheric
air.  Air samples were collected for 4-7 hours under different
meteorological conditions.  The results proved that  aerosol of
hydrochloric acid can be present in the air.**

11013                                                           M

A. Alvarez


COSTIHDOUS DETERHINATION OF TBBCIS CE S02 IN AIB, USING HSTEH
AS THE ABSORBING SOLUTION.   Preprint,  New York  State Dept.
of Health, Albany, Div. of Air Besources,  ((24))p.,  1968.
3 refs.   (Presented at the 61st Annual fleeting of the Air
Pollution Control Association, St. Paul, Hinn.,  June 23-27,
1968, Paper 68-69.)


A method for the continous determination of traces of S02 in
air, using water as the absorbing solution  is presented.  It is
based on measurement of the color yield by  the reaction between
sulfur dioxide  (as sulfate) and p-rosaniline hydrochloride-
hydrochloric acid-formaldehyde mixture.  The p-rosaniline
methyl sulfonic acid produced in the reaction exhibited a
naximum absorption at a  wavelength of 560  millimicrons.
Tie color was observed to be timperature independent within the
range of 65 degrees f to 76 degrees F and stable for a period
of our hours.  Interferences from H02 and  NH3 were observed
at levels beyond the concentrations existing in average urban air.
The method described in this paper exhibited a higher degree of
sensitivity than the standard Hest-Gaeke method when they were
tested io parallel.   (Author's abstract, modified)**

-------
00125                                                            as

R. L. Blanchard


RAPID DETERMINATION OF L-BAD-210 AND P01.UNIUH-210 IN
ENVIBONHENTAL SAHPLES BY DEPOSITION ON NICKEL.  Anal. Chem.
38,  (2)  189-92, Feb. 1966.

» procedure for determining Po-210 and Pb-210 simultaneously in
environmental samples was developed by finding the optimum
conditions for the spontaneous deposition of Po-210 and Bi-210 on
nickel from an HCI solution.  The effects of HCI
concentration, hydrazine concentration, tenperature, tine of
deposition, surface area of the planchet, and the presence of the
HCTOU used to ensure oxidation of environmental samples were
studied.  Recoveries of Po-210, Bi-210 ana Pb-210 were
determined for various environmental samples spiked with a
(Pb-210 Bi-210 Po-210) standard.  The Po-210 concentrations
were determined by alpha counting.  The Pb-210 concentrations
were determined by beta counting the -Bi-210 daughter.  An
aluminum absorber was used to eliminate the Po-210 alpha and
Pb-210 beta particles.  (Author)ft
2i629                                                            36

Buck, H.


DEVELOPMENT AND TESTING OF A FIITEB CABTBIDGE FOB THE ELIHISATION
Of DISTDBEING IBFLUIHCES AT TBE KEASOBEHENT OF SDLFUB DIOXIDE IB
THE  ATKOSPBEBE.   (Entwicklung und Pruefung einer Filterpatrone zur
Ausschaltung von Stoerenflussen bei der Bessung von Schwefeldioxid
in der Atnosphaere). - schriftenreibe Landesanstalt laoissions- and
Bodennutzungsschutz Landes Nordrbein-Hestfalen  (Essen),
no.  6:28-30, 1966.  i» refs.  Translated from German.  Belov and
Associates, Denver, Colo., 10p., April 15, 1970.


A filter cartridge based on the suction principle and consisting
of a layer of guartz wool prepared with a solution of Ag2S04 and
KHSOt was developed to absorb hydrogen sulfide, hydrogen chloride,
and  ammonia, the substances which interfere most with air quality
measurements of sulfur dioxide.  The cartridge absorbs the
interfering compounds during sample intake almost coapletely at
air  throughputs -of up to  180 -liters an hour .without -also-absorbing
the  S02, and is therefore suitable for automatic S02-measuring
devices operating on  low air throughput as -well as for manual
methods.  Experiments are reported investigating in further detail
the  suction of H2S  in the filter cartridge and S02 uptake bj the
cartridge.  When  conventional sampling techniques are used for the
Silikagel and TCH methods of manual S02 aeasur«aents, SO2 values
are  not distorted by  the  filter.  Instructions are given for its
preparation and installation in the sampling  device.
07689                                                            37

Chaigneau, Karcel,  and Honique Santarromana

                                                            i
DETERMlNATION OF  HYDROCHLORIC  ACID IB THE PRESENCE OF StiLPnfi
DIOXIDE BITH THE  USE  OF SOLID REAGENTS.   {(Dosage de 1'acide
chlorhydritpie  en  presence dfanhydride sulfureux  a 1'aide de
reactifs solides.))   Text in French.  Hikrochim.  Icta  (Vienna),  Ho.
5-6, p. 976-9871,  1965.   11 refs.
 22                HYDROCHLORIC ACID AND AIR POLLUTION

-------
 A method  for  the  analysis  of  hydrochloric acid in the presence of
 sulfur  dioxide  is described.   The  phosphates of cadmium,  zinc,
 mercury (II), and s.ilver absorb gaseous hydrochloric acid in the
 presence  of sulfur dioxide.   Silver  phosphate is especially
 recommended because of  its easy precipitation in the pure state,
 its rapid reaction with  a  change of  color and the accuracy of the
 determination of  the resulting chloride.   Tubing and lubricants for
 stopcocks should  be chosen for their resistance to hydrochloric
 acid.   It was also found that the  method could be used to determine
 hydrobromic acid  in the  presence of  sulfur dioxide.
111C8                                                            38
Coleman, Paul D. and Roberto Roldan


EIECTRICAL PROPERTIES OF MATERIALS IB THE FAB IHFRABED REGION.
(FIHAL BEPOBT 1 FEBRUARY 1965 - 31 JANUARY 1967.)  ILLINOIS UHIV.
Orbana, Electro-physics Lab., Contract AF-AFOSB-272-65, Froj.
9767-02 AFOSB-68-0465, 8p.,  (22) refs.
   CFSTI: AC 669573


A vacuum oonochronator for the 80 to 1000 nicron range, under
ccnstrnotion for the past year, is described.  Initial data on  the
rotational spectra HC1, BBr, N205E CH3C1 and CH3CN were taken
to test the performance characteristics of the instrument. Perfor-
mance data iadicated that the uooochromator characteristics are
wavelength reproduction 0.19; wavelength calibration 0.5*; relative
intensity measurement 5 to 10i»; and a resolution of 256 in the 300
to 700 micron range using a careen bolometer detecter and a scan
time of 1 hour.  (Authors' summary, modified)


02439                                                            39

A. V. Demidov,  L.  A. Mokhov,  and B. S. Levine  (Tr.)


RAPID METHODS FOR THE DETERMINATION OF HARMFUL GASES AND VAPORS
IS THE AIR.  Vol. 10 of TJ.S.S. R. literature on Air
Pollution and Related occupational Diseases.  Hedgiz, Moscow,
Russia.  (Technical Transl.  No. TT 66-11767.)  1962.  pp.

Volume 10 of the survey series "U.S.S.R. Literature OB Air
Pollution and Related Occupational Diseases" is  a translation
of A. V. Demidov's and L. A. Holhov's book ,"Rapid Methods
for the Determination of Harmful Gases and Vapors in the Air"
(Yekopehhlie Setoubi Oiipeuejiehnr B B Boeuyxe .Bpeuhliz H
lopooopaehlix Bewectb), published by Hedgiz of Moscow in 1962.
The greater part of the outlined procedures have been developed by
U.S.S.R. analytical chemists, while some were taken from
literature of other countries.  The collection of tests appears to
be intended primarily for the detection of dangerous gaseous and
vaporous air pollutants in indoor working premises.  For each
harmful gas or vapor qualitative as well as closely approximate
quantitative procedures are given to make possible the early
determination of dangerous harmful gas and vapor concentration  in
the air of working premises and to forestall the occurrence of
serious accidents.   The volume was intended to fleet the needs
of smaller laboratories and of field industrial  laboratory
workers.ft
                         Measurement Methods                          23

-------
00092                                                            40

N. Drexler  B. Barchas
CHEHO-7.LECTKICAL SENSING DE7IC?.  Airkem, Inc., Ren York
City, June 1961, 142p.
   CFSTI, DDC: AD 262502


This report describes an investigation of the feasibility of
utilizing gas adsorption phenomena for the identification and
quantitative determination of various gaseous materials.  A
discussion is presented of the factors influencing the
perfornance of the various components of an experimental gas
analyzer based on the measurement of characteristic adsorption
energies.  Seasons are given for the attempted use of this
principle in such an instrument together with a theoretical
discussion of the basis for concluding the instrument to be
non-feasible in practice within the limitations of the original
specifications.  A review of material
obtained from available literature sources as well as
informa
-------
A GAS ANALYSE* FOR THE MEASUREMENT OP IMPDBITIES IN ATB.   Instr.
Review, 15 (19: 98-99, Feb. 1968  Translated from German,
Electrotech.  (B), No. 2, 1966.


A gas analyzer has been introduced which measures air impurities
such as S02, HC1, NH3, SO, K02, CO, C12, and H2S.  The instrument,
called Picoflux, operates on an electrocundactivity principle. The
various air contaminants are analyzed by using different electolyte
solutions in the voltiac cell; if several gases are present,
preliminary filtration is also employed.  The instrument is suited
for measuring low concentrations; 0 to 0.3 ppm S02; 0 to 0.5 pptn HC1
and 0 to 1 ppm NH3.  The range is adjustable by a factor of 2.5 or 5
with the flick of a switch.  An integrating recorder allows 10- or 3
minute mean measurement readings.

OH257                                                            43

E. Kh. Gol'dberq


PHOTOMETBIC DETERHINATION OF SHALL AMOUNTS OF VOLATILE HINEHAL
ACIDS (HYDROCHLORIC AND NITBTC) IN THE ATMOSPHERE.
(Fotometricheskoe opredelenie malykh kolichestv letuchikh
mineral'nykh kislot {solyanoi i azotnoi)  v atmosfernon vozdukhe.)
Hyg. Sanit.  31, (9) UftO-3, Aug. 1966.  Buss. (Tr.)
   CFSTT:  TT 66-51160/7-9


A spectrophotometric method was recommended for the analysis of
low concentrations of mineral acids in the atmosphere.  However,
it is not always possible to use this method at the laboratories
of the district sanitary-epidemiological centers because of the
absence of a spectrophotometer.  Modification of the
spectrophotometric method for purposes of photometric
determinations with a photoelectrocolorimeter reguired a
calibration graph for the relationship between the optical
density and the concentration of hydrogen ions in micrograms per
1 ml for an FEK-56 photoelectrocolorimeter.  Standard solutions
were prepared from fresh 0.005 8 HC1 and HN03.   Solutions
were made containing 0.005 to 0.02 nicrogran/nl H+.  A zero
solution (distilled water)  was prepared simultaneously.  In all
cases, an addition was made of 0.4 ml 0.01% alcohol solution of
methyl red.   The optical density of standard solutions and of a
zero solution with the methyl red reagent was determined with
respect to distilled water.  This photometric technique Bade
possible the establishment of constant optical densities of aqueous
solutions of acids in the standard scale, independent of the pH of
the distilled water used.  The sensitivity of the photoelectro-
colorimetric method and the sampling procedure are the same
as for the spectrophotometric method.  Studies were also
made of the possibilities of visual colorimetric determinations.
It was found that in the absence of a photoelectrocolorimeter
the solutions can be determined colorimetrically by visual means by
the method of standard series with an artificial scale.f#

03369                                                            4*.

S. Hantzsch  and K. E. Prescher


ANALYZING AHINB TRACES TN ATMOSPHERIC AIK.  STAUB  (English
Transl.) (Duesseldorf) 26,  (8) 28-32, Aug. 1966.
                         Measurement Methods                         25

-------
A report or the- concentration  of -primary aliphatic- -amines ia aie
is given.  Absorption  tests  on low  concentration  of  amines in  air
were carried out in diluted  hydrochloric acid,  using wash bottles
and impingers.  Material  losses .during  the concentration  of
absorption solutions were also evaluated.  Practical experience in
extracting primary aliphatic Cl to  C6 amines  with amylactic
ester is reported.  Reaction of primary anines  with  -niahydrine was
used for photometric amine determination.   (Author summary)**

15752                                                            45

Hatterer, indre and Michel Forissier


PSEODOCHROHATOGRAPHIC HICROANALYSIS DTILIZIHG GAS-SOLID
EQUILIBBIA.  DETERMINATION OF  H02, HOC1, C12, HC1, C02 AND  H20.
(flicroanalyse psendochromatographigue utilisant les  eguilibres
gaz-solide.  Dosage de 1102, HOC1, C12,  HC1, CO2,  H2O).  Text
in French.   Z. Anal. £Jiem. , vol. -247:266-274, Oct. 1969.  12 refs.


Gas separation was carried oat  in two stages, condensation  and
subliaation, in a small metal  tube exposed to a temperature
gradient from 77 to 300 K.   A  non-condensable gas such as heliua,
hydrogen -or nitrogen was used  as a carrier.  In the  first stage,
the components of the mixture  were selectively solidified in the
cooled tube under partial pressures below those of the triple
points.  In the second stage,  heating of the tube with an inverted
temperature gradient caused  sublimation and completes the
separation.  Catharooeters or  mass spectrometers  were employed
for the detection and determination of the gases.  Gases  could
be determined in the range of  0.000001  to 0.0001  vole/ml  of gas.
(Author abstract modified)

03035                                                             46

H. Hayashi,  S. Koshi,  and  R.  Sakabe


DETERHIHATION OF BIST  SIZE BY  HETAL COATED GLASS  SLIDE.
Bull. Nat. Inst. Icdust.  Health (Kawasaki, Japan)
•>, 35-«2f 1961


A new method for the determination  of mist size and  numbers of
mist particles  is described, which  is useful  in air  pollution
research as well as in industrial hygiene.  A-glass  slide was
coated with a very thin layer  of metal  film:  iron was the best of
three metals tried.  The  slides were placed in  an Owens type dust
counter or a cascade impactor  for-tJus-collection  of-mist  particles.
Both acid and alkaline mists were tested.  As the corrosive
particles hit the slide,  metal was  dissolved  and  the transparent
holes which were formed could  be detected .under an optical
microscope.  Methods for calculating true particle size from the
holes in the metal-coated slide are given.**

10672                                                           47

Hersch, Paul A.


CONTROLLED ADDITION OF EXPERIMENTAL.POLLUTANTS TO AI?.  Gould-
Sat ion al Batteries, .Inc., Minneapolis, Minn.,. 2ttp.,  1968.   21  refs.
26               HYDROCHLORIC ACID AND AIR POLLUTION

-------
(Presented at the 61st annual Heeting of the Air Pollution
Control association, St. Paul, Minn., June 1968, Paper 68-
Experience jti-th, and extensions -of -less koow techniques— o£
providing an air stream with a steady and adjustable level  or a
gaseous impurity are described.  leaving aside those means  that
employ moving solid parts, the pap&c -discusses -devices -osiag liquid
pistons, mikro-flow through channels, diffusion across channels  and
barriers, stream splitters for attenuation, and nethods based on
evaporation, electrolysis, chemical conversion, -and iciadLation.
(author s abstract, modified)


05078                                                             43

E. B. Kuczynski


EFFECTS OF GaSEOnS aiR POLltJTANTS ON THE RESPONSE OF THE THOMAS
SO 2 AUTOHETEH.  Environ. Sci. Technol. 1,  (1) 68-73, Jan.
1967.


A study was made of the quantitative response of the Thoaas
S02 autometer to gases that night coexist with S02 as air
pollutants.  These gases included N02, NO, HC1, CL2, NH3
, and HF.  The gas mixtures were prepared dynamically at the
ppa level by a flow nexing method to a high degree of accuracy.
Syringe pumps were used to add small quantities- of -pare gases to a
large vol. air strean.  The effects of N02, HO, and HF on
the SO2 reading were small, but HC1 , HH3, and CL2 gave
significant response.   (Author abstract)**

                                                                  43
06962

8. lei the  and G, Petschl


COBPARATIVE ABSORPTION TESTS FOR DETER HIHATION OF GASEO0S AIR
CONTABISAHTS TN WASH BOTTLES.   (Vergleichende
Absorption-sversuche zur Bestimmung  gasformiger
tnf tverunreinigungen in Baschf laschaa,-)- -2. Anal, Che*.
226  (») , 352-61  (1967). Get.


Comparative gas-absorption tests are described using air
contaminated with C02, HC1, NH3* SO2, and air samples from
•production -plants -containing fluorides,  ¥b« -concentrations were
in the range of the Haximnm Allowable Concentrations and below.
Three kinds of gas washing bottles have been employed:  1)
Topinger washing bottles, recently recommended for air -analyses;
2) ordinary Drechsel washing bottles; 3) washing bottles with
porous glass discs containing a foam formation agent.  The
effect of the Impinger~eq«all«4- that -of the 4>r«chsel type.  -8it4i
BC1, NH3, and SO2 there was no difference between Impinger
and foam absorption bottle, but with C02 and air samples
containing fluorides foam absorption showed up to ten tines higher
absorption efficiencies.  Corresponding analyses of open-air
samples containing fluorides are being conducted.   (Author
summary)**
                           Measurement Methods                         27

-------
OS587                                                            SO

linch, A. L.,  B. F. Stalzer,  and D. T. Lefferts


PIETHYL AND ETHYI HEBCUTtY CCMPODSDS—EJLCOVERY FRCM  AIB AND
ANALYSIS.   Am. Jnd. Ilyg. Asscc. J. , 29(1):79-86,  Jan.-Feb.
1968.  15 tefs.  (Presented at the 28th Annual  Meeting,  Ameri-
can Industrial Hygiene Association, Chicago, 111., Bay 3,
1967.)


Attempts to recover dimethyl or diethyl mercury vapor by absorp-
tion in the reagents usually reccmmended foe collection  of mercury
from air met with failure.  The absorber design, whether impinger
or porous glass diffusticn type, contributed only  minor  differ-
ences.  However, 0.1H iodine ncnochlcride in 0.5H  hydrochloric
acid gave guantitative recoveries of dimethyl and  diethyl mercury,
raonomethyl and monoethyl mercuric chlorides, and mercury vaporized
into moving airstreams.  The reagent also is applicable  to the
analysis cf mercurial-bearing dusts.  Again, the absorber design
was not critical but irapinger recoveries were rate-dependent.  The
Teflon permeation tube for S02 calibration  was adopted success-
fully to the dynamic calibration of microimpingers developed for
personnel monitoring.  The ACGIR procedure  for analysis  was
followed after sample collection.   (Authors' abstract)##

08455                                                            51

ludwick, J. D.


IDENTIFICATION AND MEASUREMENT OF HYDROGEN  CHLORIDE GAS IN THE
ATHOSPHEB5 BY SPECTHOPHOTOMETRIC AND HADIOMETHIC ANALYSIS.  In:
Pacific Northwest. Laboratory Annual Report  for 1966 to the
OSAEC Division of Biology and Medicine.  Volume II:
Physical sciences.   Part 1.  Atmospheric Sciences.
Battelle-Northwest, Kichland, Bash., Pacific Northwest Lab.,
Contract AT (15-1)-1830, BWWL081-1, p. 76-78, Oct.  1967.
1 ref.
   CFSTI:


A simple method by which almost any field-collected chloride
sample could be analyzed was developed.  Standardized chloride
solutions were treated with suitable volumes of silver nitrate
solution tagged with Sg-110.  The solution  with the precipitated
AqCl was analyzed for gamma.  If a standard silver solution
containing the proper specific activity of  Ag-110  is used,
there is no upper limit for chloride determination, and  as little
2 T 10(to the minus 7 power)  q can be rapidly measured.  To
sample hydrogen chloride gas from the atmosphere,  a scrubber-colunn
collector was designed and assembled.  Two  field tests using HC1
qas were conducted over the Meteorology Grid network.  About
5 pounds of HC1 was released over a period  of 10 minutes in each
test.  Twelve samplers were arranged Downwind on the two innermost
arcs located 200 and ROO meters from the source.   A cowme-_rtal
portable HC1 gas sampler was evaluated for  analytical       .
sensitivity.   The instrument was moved alona »•*••• aete^tdlogy arcs
as HC1 emission took place.  The instrument «as sufficiently
sensitive to detect and measure the HC1 at  the 800 aeter
distance.  Peal-time measurements made with the portable
instrument agreed with analytical results of chloride content fron
28                HYDROCHLORIC ACID AND AIR POLLUTION

-------
 the field collectors by  the  radiometric  technique  described.   The
 peak  field concentration of  HC1  gas  at 800  meters
 corresponded  to  an  air concentration of  about  2  r  10 {  to the  minus
 7 power) ppm.S*

 02570                                                            52

 H.D. Hanita  V.P. Helekhina


 A SPECTROPHOTOMETRIC METHOD FOR THE  DETERMINATION OF NITRIC AND
 HYDROCHLORIC ACIDS  IN THE ATBOSPHERIC AIR IN THE PRESENCE Of
 NITRATES AND CHLORIDES.   (Spektrofotometricheskii netod
 opredeleniya azotnoi i solyanoi kislot v prisutstivii nitratov v
 atmosfernon vozukhe.)   Hyg.  Sanit. 29, (3)  62-6, Kar. 1964.
   CFSTI:  TT65-50023/3


 A sp'ectrophotometric method for the  determination of
 hydrochloric and nitric  acids in  the presence of nitrates and
 chlorides is described.  This method is based on the determination
 of the optical density of colored aqueous solutions containing the
 above acids after the addition of methyl red in ethanol.  The
 sensitivity of the  method is 0.18 microgram of HcL per ml and
 0.31 microgram of HN03 per ml.  Other acids and- bases
 interfere with the  assay.  C02 and S02 always present in
 atmospheric air do  not interfere  with the spectrophotonetric
 determination of hydrochloric and nitric acids when this is
 carried out under the conditions  described.**

 19504                                                           51

Hozan, C.,  A.  lacquaniti, and I.  Fettinati


EVAIDATION OF THE RISK PRESENTED EY INDUSTRIAL POISONS.
 (Evaluation du risque  induit par les toxigues industrials).  Text
in French.   Arch. Maladies Profess. Bed.  Trav. Securite Sociale,
 31(3):111-146, Hatch 1970.


The determination of the actual concentration of a pollutant in
air leads to accurate,  reproducible results only when certain
factors that affect it are taken into account.  Thus, as in
processing a sanple of polluted air, the pollutant must be absorbed
completely by the absorbent used in its determination.  It is
essential to know that the bubbling rate of the air sample through
the absorbent liquid has a significant effect on the amount of
pollutant absorbed  in  the process.  A potential source of
incorrect interpretation of results  of perhaps otherwise
accurate measurements  is the assumption of a uniform distribution
of the pollutant throughout a given enclosed space while, its actual
distribution is nonuniform.   These two findings and those to
follow are illustrated by results of measurements of concentrations
in air, in ng/cu m  of  hydrochloric and hydrocyanic acids,
ammonia, sulfur dioxide, and trichlorethylene.  Another important
factor was discovered after a snail  hermetically sealed test room
had been constructed for experiments in an atmosphere with known
 pollutant contents.  Their measured actual  contents in the
 test-room air were  appreciably sroaller then the theoretically
 expected ones.  Analogecus results were obtained when air samplers
 were taken by small Draeger tubes and when  the masonry walls of
the test room were  replaced by walls made of aluminum sheets.  That
                          Measurement Methods                          29

-------
some of the pollutant  introduced  into the aix  of the  room  is
deposited on the walls was  full;  confirmed  by  a test  in  which an
aluminum plate of  known surface area was attached  to  the wall and
the amount of pollutant deposited on it during the test  was
deterained analytically.  When  'flushed' with  fresh air  this amount
progressively decreased, as expected.  Such 'contaninated1 vails
nay act as secondary sources  of air  pollution.


0832U                                                            54

Nietruch, P.  and K. E. Prescher


DETERMINATION OF SDIFDR DIOXIDE HITH PABAROSANILINE AND
FORMALDEHYDE.    ('Beitrag zur Bestinnung von Schvefeldioxid
nit Pararosanilin und  Formaldehyd.))  Text  in  German.  Z.
Anal. Chen. (Berlin),  226(3):259-266, 1967.  5 refs.


The comparative suitability of four commercially prepared and two
isomerfree pararosaniline reagents for S02  determination (West
and Gaeke method) was  studied.  The absorption spectra of the
pararosaniline reagents in  neutral and hydrochloric solutions, and
the spectra of the dyestuffs developed by formaldehyde,
dichlorosulphitonercurate and hydrochloric  pararosaniline
solution were compared.  In spite of differing behavior  in
hydrochloric solution,  the  pararosaniline reagents studied were
deemed suitable for S02 determination.  A standard for
pararosaniline reagents and sufficient dyestuff developing time
are cited as factors important in the production of reproducible
results.f*

00492                                                            55

F. E. Ordoveza  and P. V. West


HICFODETERMINATTON OF  CAFFEINE USTSG THE RING  OVEN  TECHNIQUE.
Anal. Chim. Acta Vol.  30:227-233,  1964.


A rapid and highly selective method for the nicrodetermination of
caffeine of special interest for  air pollution studies is
presented.  Hith the ring oven technique and with  solutions of
acetylacetone in sodium hydroxide and p-dinethylaminobenzaldehyde
in hydrochloric acid, as little as 0.5 microgram caffeine on the
ring can be determined with an average error of 3H.  Compounds
containing purine bases which would be likely  to give the same
color reaction as caffeine do not interfere.  Of the organic air
pollutants which might be collected from the atmosphere during the
sampling for caffeine, benzo(alpha)pyrene and  formic acid do not
interfere.  Interferences from formaldehyde and ur«a are easily
eliminated.  (Authors' summary)*!

05896                                                            56

J. J. Phair,  H. J. Shephard,  G. c. R. Carey,  H.  1.
Thomson
THE ESTISATION OF GASEOUS ACID IN DOMESTIC PBEBISES.   Brit.
J. Ind. Bed.  (London)  15, 283-92  (Oct. 1958).
30               HYDROCHLORIC ACID AND AIR POLLUTION

-------
Measurements of the concentration of gaseous acids and other
variables within the micro-environment of the home are reported
A description is given of a small sequence sampler that gives
six-hourly readings of gaseous acid concentration in domestic
premises.  Samples are returned to the laboratory for
analysis by the conductivity method.  Factors affecting the
rate of sampling and evaporation of aosorbent solution are
critically evaluated.  Evaporation is an important problem
uith the original model and methods of minimizing water
loss habe been incorporated in later designs of the apparatus.
Gaseous acid measurements largely reflect the amount of S02
in a suburban atmosphere and an efficiency of 95% can be
obtained with single-stage sampling.  Ammonia and
hydrochloric acid vapour are also absorbed although these are
resent in lesser and approximately equal amounts.  Sulphur
trioxide is not absorbed to any significant extent, but this is ?
minor constituent of suburban atmospheres.  The
variation ^between different sampling units in the same room
is considerable in the presence of dry gaseous S03, and even
under normal room conditions the 95* confidence limits of
observations made from a single point are + or - 0.0024 p.p.m.
Differences between different parts of a large building
are even greater.  Indoor measurements show a general tendency
to follow outdoor readings with a lag of up to two hours;
however, the indoor concentrations of gaseous acid are on the
average much lower, and do not show the sharp peaks seen at
outside locations.  The relationship between gaseous acid
levels in different parts of the city is not constant since
in each area the industrial output is supplemented by a
seasonally varying domestic -heating load.  The relationship
between gaseous acid and particulate contaminants also varies
in different parts of the town, perhaps on account of
differing amounts of alkaline pollutants in the atmosphere.
(Author summary modified)i#

17128                                                            S3

Saltzman, Bernard E.


PBEPABBTION AND ANALYSIS OP CALIEHATID LOU COHCENTHATIOHS Of
SIXTEEN TOXIC GASES,   Anal. Chem., 33 (8):1100-1112, 1961.  20 refs.


The development and testing of analytical methods fox the accurate
determination of low concentrations of various toxic gases are
described.  All-glass flew systems were preferred for the
dilution of gases with purified air, since such systems avoid
serious errors from surface adsorption or reaction with impurities.
Several practical flow dilution systems are described and
diagrammed, as.-well as an asbestos plug flowneter which was found
useful for metering flows varying from a few hundredths of a
milliliter to a few milliliters per minute; motor-driven glass
syringes can. also be used for setering gas (and liquid) flows in
these ranges, but have the disadvantage of intermittent operation.
Rotameters are convenient for netering gas flows greater than
10 ai/nin, but becuase of calibration difficulties «e considered
secondary rather than primary measuring devices.  In an evaluation
of chemical analytical methods, it was found that many of the
methods available were based en assumptions derived from studies
conducted either at high gas concentrations or in liquid solutions;
various difficulties are encountered when such methods are
critically tested at low concentrations.  The methods finally
                          Measurement Methods                         31

-------
selected were first tested for sensitivity for sanples of
reasonable size; results consistent with both sample volume and
test gas concentration; adequate absorption efficienty with the
available sampling equipment; and adequate stability of reagents
and final solutions.  The role of sampling absorption
efficiency is developed mathenatically, and midget sampling
equipment described.  Finally, methods are given for each of the
following gases: amnonia, arsine, brcmine, carbon dioxide, carbon
monoxide, chlorine, chlorine dioxide, ethylene oxide, hydrogen
chloride, hydrogen cyanide, hydrogen fluoride, oonoethanolamine,
nitric oxide, nitrogen dioxide, phosgene, and stibine.


02559                                                           58

B.E. Seleznev  I. A. Chernichenko


SPECTROPHOTOHFTRIC DBTEPMINATION OF THE CONCENTRATION OF
CHLOBTETRACYCLINE IN THE AIB.   opredelenie kormovogo
khlortetatsiklina v atmosfernom vozdukhe spektrofotometricheskim
metodom.)  Fyg. Sanit. 31,  (3) 3W6-8, Bar. 1966.
   CFSTIl  TT66-51160/1-3


The possibility of using spectrophotometry for the quantitative
determination of chlortetracycline.in the air was studied.  Among
the solvents investigated,  the most suitable was 0.1 N, HC1
solution, since this produced the highest optical density in the
ultraviolet.  The method is fairly sensitive  (0.01 micrograms/ml)
hut nonspecific, interference being encountered from other
organic corapur.ds which absorb similar wavelenghts. #*

 14486                                                            59

 TJbi, K.


 THE JlET^RfllNATTON  OF  ACIDTC GASES  IN WORKING  ENVIRONMENTS  BY
 AIKALI  FILTER  PAPER.   (Alkali  rcshi ho  ni  yotu  sagyo kankyo chu
 sansei  gas no  sokutei).  Text  in Japanese.  Nippon Eiseigaku
 Zasshi  (Japan  J. Hyg.),  24{1):«9,  April  1969.


 The alkali filter  paper  method for determining  acid gases  in
 working environments  entails  soaking filter paper in a  30%
 potassium carbonate solution,  drying the paper  in air,  and
 putting it in  a  vinyl  holder  having an exposure area of 64 sg cm.
 Absorbed gases are extracted  with distilled water and determined
 qualitatively  and  quantitatively.  The required exposure time is
 determined bv  the  typp of  acid being measured,  the production
 process, and the sensitivity  of the determination method.
 Generally, 1 to  8  hrs  are  appropriate for acidic gases  like
 S02, HC1, and  N02, and 8 to 24 hrs for acid mists of sulfuric,
 phosphoric, and  chromic  acids.  One hour is usually required
 for 502 measurements  by  the para-rosaniline formaline method;
 the CL-Ba method requires  8 to 24 hrs.   When  the relationship
 between the amount of  S02  adsorbed on the filter paper  and jthe
 average gas concentration  in  the working environment is plotted,
 a curve is obtained.   Thus, on a per day basis, the coefficient
 of conversion  depends  on the amount adsorbed.   However, the   i
 graph for an hour  of  exposure  tine is linear, suggesting that
 shorter exposure tines would be convenient for  the calculation.
 32                HYDROCHLORIC ACID AND AIR POLLUTION

-------
06829                                                            6tt

P. W. West  and H. Coll


SPECTHOPHOTOHETRIC DETERMINATION OF CHLOEIDB  IN  Alt).   Proc.
Symp. Atmospheric Chemistry of Chlorine and Sulfur Compounds,
Cincinnati, Ohio, 1957.   (1959). pp. 37-41.


A spectrophotontetric procedure for guantitation  of chloride in air
is described.  Air is bubbled into a solution of iron perchlorate
in perchloric acid.  The light absorption of the iron-chloro
complex is measured at 350 millimicrons and the  estimate of
concentration obtained from a chloride calibration curve.
Experiments to determine efficiency, optimum concentration of
reagents, and interfering elements are discussed.  Method
provides rapid, routine analysis of chloride, has a sensitivity
higher than conventional procedures, and is not  restricted by
interferences.**

20030                                                            61

Hyszynska, Halina, Konrad Kosinski, Stefan Haziarka, Zbignieu
Misiakiewicz, and Artur Strusinski


METHODS OF SIDDY OF 4THOSFHEBIC AIB IBCH TBE HYGIENIC POINT OF
VIEW.  (Hetody sanitarnego badania rowietrza atmcsferycznego).
Text in Polish.  Wydawnictiia Hetodyczne Panstwowego Zakladu
Higieny (flethodologic Study Govt. Dept. Hyg.). no. 10, 141p., 1968.
82 refs.


Methods of determining pollutants, the admissible concentration
of which was limited by Polish legislation, and  determining a
number of other atmospheric pollutants which in  excessive amounts
are either hazardous to health cr cause damage by corrosion are
reviewed.  Determination of air dustiness, chemical analysis of
dust, and determination of sulfur dioxide, sulfur trioxide, carbon
disulfide, nitrogen dioxide, nitric cxide, fluorine, chlorine,
hydrogen chloride, ozone, phenol, benzene, chlorbenzene, and
aniline ace presented.  A description of each method includes
principles of the method, its limitations, a description of the
apparatus, procedure of sample collection, and data evaluation.
The apparatus required usually are not expensive and complicated,
but they have to be precise and well calibrated  because of the
extremely low concentrations measured.  The reagents used have to
be of high purity.  Host of the methods described were verified
and tested on the laboratory scale and in routine determination of
pollution.  Thus no difficulty should be encountered in their
application.
                          Measurement Methods                         33

-------
                       CONTROL METHODS
C4943                                                            62

H. L. Barnebey


REMOVAL OF EXHAOST ODO«!S FROM SOLVENT EXTRACTION OPERATION BY
ACTIVATED CHARCOAL ADSORPTION.   J. Air Pollution Control
Assoc. 15, (9) l»22, Sept. 1965.


Isopropyl alcohol vapor is. being exhausted in 2000 cfm of air at
120 deg P from a process involving the extraction of lemon pulp
by the solvent.  The emission also contains trace quantities of
hydrochloric acid droplets and a varying amount of particulate
matter from fruit skins and peelings.  The emission caused a fire
hazard and was credited with a contribution to the smog problem.
The rate of emission of isopropyl alcohol was 35 gallons per
hour.  A liquid scrubber is used to remove the particulate matter
and acid fumes.  The scrubber uses a 1 N sodium carbonate
solution.  The scrubber is followed by the activated charcoal
adsorption system.  This consists of two horizontal absorbers
containing beds of activated charcoal, a condenser, and the
necessary storage tanks, piping, valves, and controls.  The
solvent is removed from the charcoal bed by steam stripping and is
condensed along with part of the steam.  This
adsorption-desorption cycle can be repeated many times per day for
a period of years until the charcoal bed becomes contaminated with
high molecular weight substances.  The condensed dilute alcohol is
concentrated in a fractionating column so that it can be reused in
the process.   The odor, hydrochloric acid fumes, and particulate
matter are reduced to the point that they are not readily
detectable.  The effluent air stream contains less than 0.05 Ib
per hour of isopropyl alcohol.  The system continuously removes
and returns for reuse in excess of 95 percent of the isopropyl
alcohol vapor coning to the unit.  The five percent loss of
solvent does not represent exhaust to the atmosphere but is mainly
caused by losses in collection and in the distillation of the
dilute solvent.  The total operating costs for the required
electrical power, cooling water, steam, maintenance, chemicals,
and supervision is about one-seventh of the market value for new
alcohol.**


07552                                                           63

Billings, Charles E.,  Charles Kurker, Jr.,  and Leslie
Silvernan


SIHDLTAHEODS HEHOVAL OF ACID GASES, HISTS, ADD FUHES HITH
HINERAL WOOL FILTERS.  J. Air Pollution Control Assoc.,
8(3):195-202, Nov. 1958. 20 refs.  (Presented at the 51st
Annual Meeting, Air Pollution Control Assoc., Philadelphia,
Pa. , Hay 26-29, 1958.)
                                35

-------
Investigations have  indicated  that  two  in.  thick filters  at four
Ib/cn.  ft. packing density  will  remove  up to  SOS of  acid  mist
and up  to 99% of acid  gases and  fames.  Total filter life depends
upon concentration .of  contaminant in the entering air.  A
summary of filter performance  is given.  Estimated operating life
based upon one use of  the filter material can be obtained from  the
data given.  With particulates such as  iron oxide and  fly ash,  it
has been found possible  to  wash  and reuse filters about ten times.
When iron oxide was  collected  simultaneously  with S02, filters
were reused about eight  times.   Acid gas collection  is
significantly improved by the  presence  of moisture on  slag wool
filters.  Mineral wool filters have several features such as. Ion
cost  (about 1 cents/lg.), small  fiber diameter (H micron  and
ability to withstand high temperatures  (1000  deg F.).  Slag wool
will simultaneously  remove  sub-micron particulate materials with
90 to 99% efficiency.  Resistance to flow through two  in. slag
wool filters  (with an  HF efficiency of  95%) is on the  order of
one or  two in. of water, or if continuously moistened, at most  6
in. of  water.*t

10017                                                            fA

Bloomfield,  Bernard E.


CONTROL OP GASEOUS PCIUJTANIS.  Heating, Piping, Air Condition
ing, 40(1):195-206, Jan.  1968.  26  refs.


Control technology in relation tc air pollution involves the
application, singly or in combination,  of tall stacks for dispersion
process changes, and control equipment.   Host  gaseous contaminants
can be controlled using the tecbnigues cf absorption, adsorption,
direct flame combustion, and catalytic combustion.  The theoretical
principles of design and operation  preclude under most circumstances
the use of any of the shelf items for air pollution control purposes
 Good design, construction, and  Fr°Fer operation are the  requisites
of a satisfactory system.  The special characteristics of a number o
systems are described.   A table of  selected air guality standards is
given for such pollutants as sox, NCx, CO,  R2S, and ozone.

17320                                                            65

Kenpner, Stanley K., E.  N.  Seiler,  and Donald  H. BOHnan


PERFORHANCE OF COMKERCIAI.LY AVAILABLE EQUIPMENT IN SCRUBBING
HYDROGEN CHLOHIDE GAS.  J.  Air Pollution Control Assoc.,  20(3):
139-143, Harch 1970.


Six commercial fume  scrubbers  were  tested for  their  ability to
remove  hydrogen chloride gas from plating room exhaust air.  The
scrubbers, which represent  different types  of  equipment available
for this application,  were  chosen on the basis of their specified
ability to remove 90S  of the contaminant from  a 2500 scfm gas
stream  consisting of ambient air with 20 ag/cu m of  HCl gas.
•The units were connected to ductwork and piping simulating actual
producting conditions.   The contaminant was carefully metered into
an accurately measured air  stream drawn through the  scrubber.   A
continuous sample of the scrubber discharge was recorded  by a
conductivity meter.  The results are presented in a  series of
curves  plotting efficiency  vs  water rate.   Efficiencies of close
36                HYDROCHLORIC ACID AND AIR POLLUTION

-------
to 100* were obtained with a vertical packed scrubber and extended
surface scrubber.  A horizontal packed scrubber and a plate
scrubber attained efficiencies of better that 95S.  A fan type
scrubber was entirely unacceptable and is not recommended foe use
with a gaseous contaminant.  The tests also revealed that optimum
efficiencies can be obtained at water rates much lower than those
recommended by the manufacturers.  This makes it practical to use
nonrecirculated water in production scrubbers.  Variations in
scrubber design and effectiveness of mist eliminators are also
discussed. (Author abstract modified)

09057                                                            66

Carter, C. Heal


EFFECTS OF pH AND OXIDIZING AGENTS ON THE RATE OF ABSORPTION OF
HYDROGEN SULFIDE INTO AQQEOUS MEDIA.   TAPPI, 50 (7):329-334 ,
July 1967.  19 refs.


The rates of absorption of hydrogen sulfide into aqueous
soluticns of hydrogen chloride, sodium hydroxide, and sodium
hypocblorite were measured by means of a laminar liquid jet.
The effects of various reactions were determined by analyzing the
data in terms of the  penetration theory.  The various reactions
that were found to influence the rates of absorption determined
in this study were an ionization reaction, which had a first order
forward rate constant of 8.H per sec; a neutralization reaction
between hydroxide icns and hydrogen sulfide molecules, which had
an "infinitely high"  rate; and an oxidizing reaction, which had an
"apparent" tirst-order rate constant of 250 per sec for a 0.IN
hypochlorite solution.  The data en the absorption of hydrogen
sulfide into basic soluticns indicate the possibility that the
laminar jet and wetted-wall cclunn dc not give comparable results
for cases of absorption accompanied by an "infinitely fast"
reaction.  Further analysis cf the rates of absorption into
oxidizing solutions indicates that hydrogen sulfide will react
initially with the hypochlcrite icns to fora dihydrogen salfoxide,
which in turn will form unstable complexes with more hydrogen
sulfide molecules by  sulfur-sulfur bonds.  The data also indicate
that for oxidizing soluticns abcve pH 12, the rates of absorption
are influenced by the decora position of dihydrogen sulfoxide, which
gives hydroxide ions  as a product.   (Author's abstract)##

09795                                                            67

Chatfield, Harry B.   and Pay H. Ingels


GAS ABSORPTION EQUIPMENT.   In:  Air Pollution Engineering
Manual. (Air Pollution Control District, County of Los
Angeles.)  John A.  Danielson (comp. and ed.), Public Health
Service, Cincinnati,  Ohio, National Center for Air Pollution
Control, PHS-Puh-999-AP-ttO, p. 210-232, 1967.
   GPO:  806-614-30


Gas absorption equipment is designed to provide thorough contact
between the gas and liquid solvent in order to permit interphase
diffusion of the materials.  This contact between gas and liquid
can be accomplished by dispersing gas in liquid or vice versa.
Absorbers that disperse liquid include packed towers, spray towers
                            Control Methods                           37

-------
and ventaci absorbers.. Equipment  that uses gas dispersion includes
plate or tray towers and vessels  with sparging equipment.  The
principles of designing plate towers and packed towers are
discussed in detail.  The following items are included in the
discussion on packed towers:  packing materials, liquid dispersion,
tower capacity, tower diameter, number of transfer units, height of
a transfer unit, and pressure drop through packing.  An example of
calculations involved in designing a packed tower for the removal
of NH3 is illustrated.  liquid flow, plate design and efficiency,
flooding, liquid gradient on plate, plate spacing, tower diameter,
and the number of theoretical plates are included in the discussion
of plate towers with specific emphasis on bubble cap plates.  An
example of the calculations involved in deternining the number of
plates required and estimated diameter of a plate tower is
illustrated.  The choice of gas absorption equipment is usually
between a packed tower and a plate tower. Both devices have
advantages and disadvantages.  Factors which the final selection
should be based upon are listed.  Spray-type absorbers and venturi
absorbers are also briefly discussed.  These towers are primarily
used for removing particulates from gas streams, though they have
some gas absorption applications.  The gaseous air contaminants
most commonly controlled by absorption include S02, HH3, NOx,
and light hydrocarbons.

111369                                                            6*

Eberhardt, H. and W. Hayer


EXPERIENCES WITH REFUSE INCINERATORS IN EDKOPE, PREVENTION OF AIB
ASD WATER POLLDTIOB, OPEBATION OF BEFUSE IHCIHERATION PLANTS
COMBINED HITH STEAM BOI1EBS, DESIGN AND PLANNING.  American
Society of Mechanical- Engineers,  New York, Incinerator Div., Proc.
Natl. Incinerator Conf., New York, 1968, p. 73-86.  7 refs.
IMay ^-8) .

European steam generators with refuse firing must meet a number
of stringent legal requirements for environmental control.  In
Germany, the dust eoission of refuse incineration plants with a
refuse throughput of more than 20 tons refuse/day may not exceed
150 mg dust/cu Nm clean gas referred to 7X C02 at any time.
Depending on the preload of the site environment, this value must
still be lowered so as to remain within the emission limits of
0.12 g/sq m/day for the annual mean and 0.65  g/sq m/day for the
aonthly mean.  Flue dust collectors have over 98% efficiency.
Difficult physical and chemical problems with the fuel and with
boiler availability are met by attention to many engineering
details.  Hhile the analysis of residential refuse is a
relatively simple procedure, the determination of the volume and
composition of industrial refuse is especially difficult and
contributes in large part to the difficulties in planning and
design of incineration plants,  in Europe, refuse incinerators
are combined with steam boilers, and operation of these large
plants has shown that boilers with refuse fire chambers
including the accessory equipment differ fundamentally from
conventional plants in design and operation.  The paper considers
these plants in detail and compares them with plants operating
with fossil fuels.  It is shown that corrosion of boiler and
superheater tubes is largely prevented by maintaining oxidizing
conditions in critical areas.  It was concluded that the primary
factor in all considerations of the special requirements for
refuse incineration plants, compared to conventional steam
boilers, is the conversion of wastes into sterile end products.
                  HYDROCHLORIC ACID AND AIR POLLUTION

-------
16521                                                             69

Tokyo Metropolitan Government, Japan, Public Nuisance Control Div.


THE EMISSION SOURCES 0? HC1 AND NH3 AND THEIB STANDARD CONTBOL
EQUIPMENTS.  (Enka suiso oyobi anmonia no hasseigen to sono
hyojun jogai shisetsu ni tsuite).  Text in Japanese.  Kogai to
Taisaku (J. Pollution Control), 2 (7):461-«66, Aug.  15, 1966.


Hydrogen chloride is emitted by plants which produce pigments,
dyes, industrial chemicals, medical supplies, and treat metal
surfaces.   Ten to 50 ppm HC1 does net prohibit work, bat is
harmful to the teeth, nose, mucosa of the mouth, and face
after long exposure.  No one can  work in air containing 50-100
ppm HCl.  Ammonia is emitted by plants which produce pigments,
manures, and medical supplies.  Cdor is noticed when the
concentration reaches 100 fpm NH3.  Chronic exposure to 400
ppm NH3 is harmful to the ituccsa.  Exposure to concentrations
of 2500-6500 ppm HB3 fox 30 minutes is dangerous, and exposure  to
concentrations of 5000-10,000 ppm NH3 quickly causes death.
Hydrogen chloride and NH3 can be  removed by absorption,
adsorption, chemical reactions, and oxidation.  Hydrogen
chloride and NH3 dissolve easily  in water which provides
another suitable method for control.  The water washing method
is divided into a packed column,  spray column, ventnri scrubber
and jet scrubber.  The washing equipment consists of an air
blower, a cleaning column, a pump, a water tank, and an exhaust
pipe.  The parts which ccne into  contact with the gas must be
constructed of an acid-alkali prcof material.  A nist catcher
must be installed on top of the packed column.  The hood oust
be carefully designed so the excess air is not inhaled.  (Author
abstract modified)


19220                                                            7Q

Erin an, janes E.


DESOLFOBIZATION USING HIBRCGHN CH10EIDE AND HTEHOGEN.  (Chevron
Besearch Co., San Jranciscc, Calif.) U. S. Pat. 3,509,015.
tp., April 28, 1970.  5 refs.  (fippl. Ouly 11, 1968, 6 claims).


An improved method of desulfurizing hydrocarbon oils in the
presence of hydrogen at a temperature between 600-950 F and
partial pressure between 100-5000 psig and in the presence of
hydrogen chloride at a partial pressure above 150 psig is
described.  Inert particles providing contact surface area for
the reactants may be used but are not required.  This process
converts organic sulfur confounds contained in a heavy oil such
as crude residuum to sulfur-free  organic compounds and hydrogen
sulfide.  This process has advantages over catalytic
hydrodesulfurization because this process does not require the
presence of snail catalyst compounds.  Also, it is not necessary
that the heavy cil be treated in the liquid state.


0«279                                                            a.

s- T. Gadoaski
                           Control Methods                            39

-------
DRY-PACKED BEDS FOR THE RESOVAL OF STBONG-ACID GASES FROM
RECYCLED ATMOSPHEBES.  Haval Research Lab., Hashington,
D.C., Chemistry Division.   (NRL Rept. Ho. 6399.)  Aug. 30,
1966.  6 pp.
   CFSTI, DDC:  AD 642 27tt


Under certain conditions, strong-acid gases can be forned in
recycled atmospheres by the combustion of haloqenated hydrocarbons.
One control measure involves the use of a dry absorbent filter.
L12C03 has already been used as an absorbent in these filters as
a result of a screening test of a number of scavenger materials.
In this report the absorptive properties of some other potentially
useful materials vere examined.  Baralyme and soda line were
superior to X.12CO3 in air at 76 deg F and over 50* P.H. ,
while the silica-alumina catalyst with monoethanolamine  (P1EA)
impregnant and the silica-magnesia catalyst were almost as
effective as Li2co3.  However, Baralyme, soda lime, various
basic materials  {UFA, gaseous BH3, Na2CO3, and quinoline)
supported on the silica-alumina catalyst, and the silica-magnesia
catalyst were all useless at 1HO deg F. especially under dry
conditions.  L12C03, therefore, still remains as the most
effective absorbent throughout the range of probable conditions.
(Author abstract)#f


00588                                                            72

L.S. Harris
FDHE SCRUBBING WITH THE EJECTOR VENTUHI SYSTEM.   Chem. Eng.
Progr., 62 («t) :55-59, Apr. 1966.


The ejector venturi scrubber is a wet type of contractor which
untilizes the velocity action of the contacting liquid media to
both pump, scrub and/or absorb the entrained gas.  This action
is especially beneficial when handling highly corrosive or
erosive gases.  The unit has no moving mechanical parts in
contact with the gas stream.  In addition it eliminates
the need for a costly corrosive or erosive resistant blower to
pump the gas through the system.  The device is basically
comprised of a conventional venturi section and a spiral type
spray nozzle which imparts a combination of axial and tangential
velocities to the contacting lignid stream.  The angle of the
spiral and the size of the nozzle orifice are arranged to (1)
impart sufficient tangential velocity to form a spray cone
which fills the venturi throat area,  (2) break up the motive liquid
into the proper drop size to permit efficient scrubbing and/or
absorption of the entrained gas and efficient separation of the
liquid drops from the discharge gas,  (3) impart the proper
combination of axial and tangential velocity to obtain the desired
pumping characteristics, and (0) impart sufficient tangential
and axial velocity to the contacting liquid to provide the
desired relative velocity between the contacting liquid and the
entrained gas necessary for efficient scrubbing.it
15995

Herold, Paul and Georg Harkus




40                HYDROCHLORIC ACID AND AIR POLLUTION

-------
RECOVERING HYDROGEN CHLORIDE AND SDLPHDR DIOXIDE FROM GAS
HIXTtJRES.  (Assignee not given.) U. s. Pat. 3,301,779.  2p.,
Nov. 10, 1942.   (Appl. Nov. 19, 19UO, 3 claims).


A method of recovering hydrogen chlcride and sulfur dioxide
separately from gas mixtures is described.  A gas mixture is washed
«ith a medium liquid which consists cf aromatic confounds
containing oxygen in an ethereal linkage and of aromatic compounds
containing oxygen in-a" phenolic linkage.  Suitable compounds
are xylenol and diphenyl ether.  The gas mixture nay either be
passed through the liguid while it is stationary or led in a
counter-current to the liquid flcwing down, preferably in
trickling towers charged with filter bodies.  The hydrogen chloride
leaves the washing liquid in a dry state free of sulfur dioxide.
The washing liquid is easily regenerated by expelling the absorbed
sulfur dioxide fcy heating, applying reduced pressure, or by
subjecting it to both measures simultaneously.  The washing
liquid can be reused after coding.

06778                                                             74
 (INDOSTRY AND ATMOSPHEPTC POLLUTION IN GREAT BRITAIN.)
Industrie et pollution atmospherigue en Grande Bretagne.
Centre Interprofessionnel Technique d'Etudes de la
Pollution Atmospherique, Paris,  France.  (1967.)  6  pp. Fr.
 (Sept. No. CI 310.)   (C.I.T.E.P.A. Document No. 2H.)


A summary of the basis of governmental action in Great Britain
in the struggle against industrial emissions is outlined.
The regulations imposed by the "Alkali Act" are in  most  cases
based on "the most practical means."  Standards are given  for
chimney heights.  Statutory limits are given for various
materials emitted such as hydrochloric acid, sulfuric
acid, nitric acid, hydrogen sulfide, chlorine, arsenic,
antimony, cadmium, and lead.  The construction of tall
buildings tends to reduce the benefits obtained by  tall  chimneys.
A better knowledge of the effects of pollutants should be
obtained so as not to burden industry with unnecessary expense  in
their control,  ft is urged that international standards
for emission be adopted.**
0055U                                                             7S

K.H. Knott  5. Turkolmez


KRTJPP POTARY BRDSH SCRUBRPR FOR  THE CONTROL OF GAS, VAPOUR,  HIST
AND DDST EMISSIONS.   Krupp Tech. Rev.  (Essen), 2«{1):25-28,
April 1966.


The scrubber which has been used successfully  for extraction
and collection of particulates soluble in water was tested
for effectiveness in  removing g-aseous pollutants from  waste
gases.  The scrubber  and the test procedures used are
Described in detail.  Gases and  particulates tested were
sulfur dioxide, sulfur trioxide, hydrogen sulfide,  methyl
fflercaptan, ammonia, ammonium chloride mist, pyrifline vapor.
Pigment mixture and copper phthalocyanine dust.  HC1 and 502
                            Control Methods                           41

-------
were absorbed sucessfully.  The  detention  period  used  Has  too
short for H2S, CH3SH, NH3 and  pyridine.  Wet  collection
of mists such as S03 and NH4C1 is  difficult.  Good  results
were obtained with  pigment  particles.**

06063                                                             76

P. Kotrappa  and D. P. Bhanti


SHORE POFF GENERATOR ROOM AIB  HOVEHENT STUDIES.   Am.  Ind.
Hva. Assoc. J. 28(2):171-17a  (Apr.  1967).


A sinple portable smoke generator  to  produce  ammonium  chloride
smoke has been designed.  Unit has been  found to  produce smoke  of
about 0.7 micron mass mean  diameter with 1.12 geometric standard
deviation.  Further it has  high  obscuring  power and  long
settling tine suitable for  studying room ventilation.  Unit can be
operated continuously over  a  period of three  hours at  4.5  liters
per minute before recharging.  Generator is inexpensive, uses
common chemicals and weighs only about 350 gnu, when freshly
charged.**


16501                                                            77

Leone, P.


RECOVEBI AMD DSE OF SULFDH  DIOXIDE  IN THE SOLFUB  EXTRACTION
EBOCESS.  (Bicupero ed utilizzazicne dell'anidride solforosa nel
processo di estrazione dello zolfo).  Text in Italia^.  Ann.
Chim. (Borne), 21:238-244, 1931.  5  refs.


A procedure is proposed for converting sulfur-bearing  gases into
hydrochloric acid and chlorine gas  ty passing the sulfur dioxide
over sodium chloride heated to 450-500 Seg.   The context of
the proposal is directed toward  the island of Sicily in the early
1930's, where the production of  sulfuric acid from S02 is
considered unprofitable, and from  where  the cost  of  transporting
such products as calcium sulfite and calcium  bisulfite is
considered prohibitive.  Two chemical reactions are  involved:
sodium chloride, sulfur dioxide, water, and oxygen react to form
sodium sulfate and hydrochloric  acid; and sodium chloride, sulfur
dioxide, and oxygen react to form sodium sulfate and chlorine gas.
Both reactions are strongly exothermic.  The  BCl is  to be  used  in
dissolving limestone gangue; the Na2SO
-------
A gas mixture containing sulfur dioxide is brought in contact with
a glyoxal solution at a temperature below 50 deg, in such a nay
as to retain the sulfur dioxide in the fora of a glyozal confound.
The solution is then heated to a temperature above 50 deg,
liberating the sulfur dioxide in the form of a nearly pure sulfurons
gas.  One nay use an aqueous solution of glyoxal, containing 1-60%
by weight of glyoxal; the optimum concentration is in the range of
10-30* and preferably 2035.  The gas containing sulfur dioxide may
also contain one or more of the following:  air, hydrogen chloride
gas, or hydrocarbons.  The best operating temperature range for
retaining the gas is 15-30 deg.  The best 'regenerating temperature
range is 65-75 deg.  The regeneration process must be halted before
the glyoxal is completely deprived of S02.

00789                                                            IS

L. Hathys


A NEB SCRUBBER FOR THE CONTROL OF BASTE GASES FOBBED DURING
CHLOHINIZATIOM OF ALUHINUH.   Bin Bauer Abscheider fur die
bei der Aluminiumchlorierung entstehenden Abgase.  Aluminum
(Duesseldorf)  HI, (11)  688-90, Sov.  1965.  Ger.


The reaction products forned by the degassing process consist
chiefly of gaseous aluminum chloride and a small amount of
hydrogen chloride.  At a temperature of 700-750 C, this gaseous
mixture discharges from the smelter.  If these exhaust gases enter
the atmosphere without precautions,  a white fog is formed when the
aluminum chloride cools to approximately 180 C.  This white fog
consists of minute particles, and the hydrogen chloride combines
with damp air to form hydrochloric acid fog.  In the interest of
keeping the air clean,  it becomes necessary to control the exhaust
from the chlorinization of aluminum.  The technignes chosen
transports the waste gases in concentrated form fron the
chlorinization apparatus to a scrubber where it is absorbed.  By
selecting a closed exhaust system, this can be accomplished.  The
scrubber installation described has been developed, and tested, for
the aluminum industry.ft


08162                                                            8°

Hatsak, V. 6.


THE PURIFICATION OF AIR POLLUTED BY VAPORS AND GRSES. In: Survey of
n. s. S. B. Literature, from Russian by B. S. Leviae. National
Bureau of Standards, Washington, D. C., Inst. for Applied Tech.,
Vol. 3, 177-185, Bay 1960.
   CFSTU TT 60-21475


Hethods for the recovery and purification of noxious substances
ejected by gas exhaust and ventilating installations are reviewed.
It was found easier to purify exhaust gases than  ventilating air.
The methods include: Chemical purification method. Condensation
method. Liquid absorption method, and Absorption  by solid
absorbents  (adsorption).  Present methods for air and gas
purification can be rendered close to 100 percent free of most acid
and alkali gases, organic solvent vapors and some other gases. But
no effective and cheap method has been found up to the present for
                            Control Mettiods                           43

-------
 the  recovery  of  carbon  monoxide.   Purification  of  air  froa  solvent
 vapors,  such  as  gasoline,  acetone,  acetates,  etc.  can  be used
 effectively only in  the case of  tail gases  and  not in  the
 purification  of  ventilating  air,  even though  it is effective  in
 both instances;  the  high cost makes its  use for purification  of
 ventilation air  economically prohibitive.   The  possibility  of using
 solid absorbents,  such  as  activated charcoal  and silicagel  for the
 purification  of  ventilation  air  may apply to  many  cases.  The
 primary  obstacle lies in the high cost of adsorbent material  and  in
 the  consumption  of considerable  electric energy in overcoming the
 pressure drop of recuperating installations.

 18115                                                          -SI-
 NEW G»S SCRUBBED FEHOVES  0.1  MICRON  DUST.   Filtration Separation
 (Purley), 6(3):308,  May-June  1969.


 Peatody Ltd.  has developed  a  high-efficiency  scrubber which,
 uhen fitted  with the new  venturi agglomerating  slot  storage,
 removes gas,  dust, and fume down to  the  0.1-micron range.  The
 scrubber recovers 99% of  all  participate matter down to  1 micron
 with minimum  pressure loss.  It also provides a simple and
 effective means of gas absorption,   such contaminants as S02,
 HC1, and C12  are readily  reocvable.
15582                                                            &

PalJcot, Edward J., Jr. and C. Judson King


THE DESIGN Of AN IBEBOVID DEVICE FOB ABSCBPTION HITH CHEMICAL
REACTION.  California Oniv., Berkeley, Lawrence Radiation Lab.,
&EC Contract H-7«05-eng-
-------
literature, device sizes necessary tc scrub gases of quantities
and compositions likely to be encountered in industry were
calculated.  Hierarchies of attractiveness of the devices for each
of the systems studied were determined by assigning relevant cost
variables to each contractor.  It was shown that seme of the
devices could well be attractive in reducing the costs of
absorption in the processes considered.   (Author abstract
modified)


05332                                                             83

A. H. Phelps


WHAT DOESN'T GO OP HOST COME DOHN.   Chen. Eng.  Progr.
62 (10),  37-HO (Oct.  1966).


Tt has been the experience of the Procter and Gamble
Engineering Division that air and water pollution control must be
a combined effort.   attempts to control pollution in the one
realm can  easily generate a problem in the other.  Several short
examples  of the combination of problems are presented.   In one of
the processes where HC1 is evolved in small concentrations the
guantities are enough to generate a major odor or corrosion
problem in the immediate area.  The guantities are too small to
justify any recovery, so a simple,  packed water scrubber was used.
The exhaust to the atmosphere is pure, but the discharge out
the bottom is an acid solution which to a user is a weak solution;
however,  from the viewooint of the sewer, it is guite strong.
The solution to avoid a water pollution problem in this case was
to neutralize the effluent from the scrubber.  A rock pit filled
with coarse limestone is used, discharging frora there to the sewer.
Other caustic solutions could be used, but in these guantities, a
truck load of rock a month is all that is needed to take care of
the acid.   A second example arises from control of particulates.
When spray drying detergents, large volumes of hot air are
exhausted  which contain some fine dust particles from the spray
drying operation.  The concentration of particulate in this gas
is around  3 gr./cu. ft. and.represents an economically
recoverable fraction.  Therefore, cyclones are used to separate
the particles dry so they may be recycled back to the process.
The effluent from the cyclone contains about 0.3 gr./cu. ft of
even finer particles.  While this would meet the air pollution
code for  many communities it would certainly not meet the
stricter  laws being written now. (t#


16749                                                             84

Holfe, 1.  J. K.


REPOSE INCINERATION.   E.C.O.B.B. (Erit Coal Util. Res. ASSOC.)
Gaz., 33(2):28-31, Feb. 1969.  12 refs.


Incinerable wastes cover a wide spectrum of gaseous, ligaid, and
solid materials.  The problems posed by the need to dispose of
increasing quantities of refuse by incineration have been
discussed in a number of papers.  This is a review of the
incineration problem particularly as it relates to bouse refuse.
                           Control Methods                           45

-------
02501                                                            IS
 (SCIENTIFIC HETHODS AND TECHNIQUES TO  DECREASE THE  POLLOTIOH OF
 THE ENVIRONHENT, THROUGH  INHALATION OH INGESTION, AND OF
 ACOUSTICAL "NUISANCES.")    Hoyens scientifiques et
 techniqu.es de diminner la  pollution des milieux inhales on  ingeres
 et des "nuisances" acoustigues.   (Chapter 3:  Les pollutions
 et "nuisances" d'origins  industrielle  et urbaine.   Tone 1.  Lear
 prevention et les problems scientifignes et techniques gu'elle
 pose en France.)  Premier  Hinistre, Delegation generale a la
 recherche scientifique et  technique.   June  1966.  pp. 47-59.


 The functioning of chlorophyll in the  course  of photosynthesis in
 leaves of plants serves as a  method of air purification of
 sufficient importance to consider its  use in  control.  Vegetation,
 like men and aninals, can  sustain a considerable amount of  damage
 to the point where the threshold limit of absorption of toxic
 substances is exceeded.   The  three gases causing the most
 damage to vegetation are carbon monoxide, the sulfur oxides, and
 those containing fluorine.  Also to be considered are acid
 "smog", toxic "snog", ozone,  and nitrogen.oxides.   Other
 industrial pollutants which have a toxic influence, but less
 sever and localized, are  dusts, hydrogen sulfides,  hydrochloric
 acid, etc.  Ethylene and  carbon monoxide cause great damage to the
 growth hormones, particularly auxin.   The effects of S02,
 S03, and H2SOU are related to the qnanity of  gas emitted, the
 degree of resistance of the species, their state of development,
 and the various environmental conditions.  The sensitivity  of
 vegetation to the action  of sulfur gases varies essentially as a
 function of the speed of absorption of the gas by the leaves.
 Through experimentation it has been found that the  plant species
 which are most sensitive  to S02 are chickweed, alfalfa, barley,
 oats, wheat, rhubarb, lettuce, endive,  spinich, cabbage, and
 tobacco.  Apples, apricots, peaches, grapes,  corn,  and beans are
 less sensitive, whereas the floral species such as  gladiolus, rose,
 and lilac offer considerable  resistance.  Aquatic vegetation is
 often used as purifying means for polluted streams.  Subsoils
 purify themselves of pollutant materials in various ways, including
 uptake by vegetation and  dispersion in the soil with rain water,
 etc.  In a section on means of decreasing the inhaled pollutants
 the following are mentioned;  dust collectors, normal methods of
 dispersion in the atmosphere, fumes from domestic fires, auto
 exhaust fumes, fuel additives, iaprovement of combustion in
 engines, recycling of crankcase gases,  post-combustion appliances,
 and redesigning of motors.  Also given in this section  (Chapter
 3) is some similar information on ingested pollutants and on
 problens of noise.ft

 10766                                                            86

seller, Ed.


DESIGN FOB AIF POLLUTION CONTROL  SELECTING  TOWEH PACKING.   Air
Conditioning, Heating, Ventilating, 65(5) :11, 13, 15, 17, Hay 1968.


Selection of scrubber packing is based  on comparison of the
following physical characteristics provided by the  manufacturer
from his calculations or tests: inertness of  material to gas and
46                HYDROCHLORIC ACID AND AIR POLLUTION

-------
scrubbing ligor, precentaqe of free space, specific surface, packed
density, and bulk density.  Performance characteristics which most
also be considered include: low gas pressure drop, high liquid
holdup, low liquid spread, and low height of one transfer unit.
Various shapes of low coast, inert materials have been developed
providing large surface areas., low resistance to gas flow and high
absorption capacity. Among the various materials used to pack
towers are metal carbon porcelain and plastic.  The criterion for
selection is the specific chemical reaction desired.  Bing-shaped
packing materials are common.  One manufacturer uses sections cut
from PVC pipe.  Two types of packing are shown: Raschig rings, a
basic type of packing material in which the rings are as high as
they are round; and Pall rings, developed in Germany.  Sith the
advent of economical, inert plastic material, packing is now molded
into many unusual shapes.


                                                                 87

Sheppard, Stanton V.


CONTROL OF NOTIONS GASEOUS EfllSSIONS.  Proc. HECAF Symp. ,
Hew Developments in Air Pollution Control.
Metropolitan Engineers Council on Air Resources, New York
City, p. 21-28, Oct. 23, 1967.  3 refs.


Several new developments have taken place which have helped
improve scrubber designs for controlling emission of noxious gases.
Some major new technical developments have been:  Greater use of
the crossflow scrubber design principle, availability of light
weight plastic tower packings, and wider acceptance of corrosion
resistant glass reinforced polyester plastics.  Some noxious
gases commonly encountered are oxides of nitrogen, hydrogen
chloride, hydrogen fluoride, silicon tetrafluoride, chlorine,
chlorine dioxide, sulfur dioxide, hydrogen sulfide and mercaptans.
In industrial applications, the removal of noxious gases from
exhaust air streams is most often accomplished by bringing the air
stream into contact with a liquid stream for a certain period of
time.  The amount of time reguired to transfer the noxious gas to
the liquid is a function of several factors.  These are:  Gas
rate, liquid rate, solubility of gas, mechanism of contact, and
scrubber type.  The packed scrubber is used most often today for
controlling emission of noxious gases to the ataosphere.  It is
available in three basic operating designs:  Counter current,
cocurrent and crossflow.  In the counter current packed design,
the air stream containing the noxious gases is passed vertically
upward in opposite direction to the flow of the down coming
scrubbing liquid.  The cocurrent packed scrubber allows the air
stream and the scrubbing liquid stream to pass through the packed
bed in the same direction.  In the cross-flow scrubber the air
stream moves horizontally through the packed bed while the
scrubbing liquid moves vertically downward through the packed bed
and perpendicular to the air streams.  Three relatively new tower
packing shapes are being used more frequently by engineers in
designing scrubber -equipment for removing gases.  These packing
materials are constructed of high density polyethylene or
polypropylene.  This gives them good resistance to corrosion and
light weight compared to ceramic ring and saddle packing,  fiber
reinforced plastics  (commonly designated as FBP) are being used
•ore and more to replace stainless steel, rubber and PTC lined
steel and other metallic alloys for scrubber bodies.  FRP is a
                            Control Methods                           47

-------
 material  that  uses  a  combination  of  polyester  or epoxy
 therraosetting  resins  and  qlass  fiber reinforcements to  give  a
 finished  laminate  that  has  excellent corrosion resistance, a high
 strength  to weight  ratio, and light  weight.##

 19386                                                            IB

 Sherwood, T. K.


 SOLUBILITIES OF  SULFDF  DIOXIDE  AHD AHHOHIA  IN  HATER.  Ind. Eng.
 Chen.,  vol. 17:215-217, July  1925.   21  refs.


 In connection  with  studies  of absorption, a literature  search  was
 conducted for  available data  on the  equilibrium solubilities
 of the  industrially important gases  sulfur  dioxide,  ammonia,
 and  hydrogen chloride.  Of  these, the data  en  the partial vapor
 pressures of sulfur dioxide and ammonia over their aqueous
 solutions are  presented in  plots  and tables, and the references
 tabulated for  each.

 11058                                                            19

 8. Teske
IflPBOVEHESTS IH THE PSOCESSIS AND OPEBATION OP JPiAHTS IK THE
CHEMICAL ISDDSIBY LEADING TO REDUCED  EHISSION.   Staub
 (English translation), 28(3):25-33, Harch  1968.
   CFSTI:  TT 68-50118/3


The emissions from chemical plants can be  reduced, in special
cases, by changing the production process  or, in general, by
using a gas cleaning method.  Change  in the production  process
may be achieved by a basic alteration of the  process itself, by
changing the mode of operation, fcy modifying  the equipment  and by
using a different raw material. ' For  this  purpose, the
doublecontact method for sulphuric acid production, the  pressure
method for nitric acid recovery and the introduction of  a covered
carbide furnace are mentioned as examples.  The superphosphate
process, viscose process, production  of betanaphthol,
production of thermal phosphoric acid and  production of
calcium chloride are given as exanples for waste gas cleaning.
 (Author's summary)**


18002                                                            SO

Tcmany, James P.


A SYSTEM FOB CCNTPOL OF ALUMINUM CHICBIDE  FOHES.  J. Air Pollution
Control Assoc., 19(6) :120-123, June 1969.


During primary aluminum processing the molten aluainuo is
periodically fluxed with chlorine to  separate impurities from the
metal.  The gaseous effluent from the chlorination process
contains submicron particulates and gaseous vapors which produce
a dense, white plume.   The plaice is acidic with hydrogen chloride
and chlorine vapors, which cause a variety of corrosion  problems.
48                HYDROCHLORIC ACID AND AIR POLLUTION

-------
Since the stack discharge temperature can range as low as 200 F —
and aluminum chloride sublimates at about 360 F, blockage of
ductwork can also occur.  For effective removal of both the
particulates and chloride gases in the effluent, a sodium
hydroxide solution is recommended.  Since, such a scrubbing liquor
produces a flocculent precipitate, a nonplugging type of scrubber
is required.  The solution OOP advanced was a "mobile packing"
type of scrubber, utilizing a ted of polypropylene spheres in
random, turbulent motion.  The motion of the packing prevents
plugging.  The paper describes the design foi such a system,
describing the optimum use of ductwork, scrubber placement, gas
saturation, and recirculaticn equipment.  Instrumentation
requirements, both mininun and optimum are discussed.  A case
study is detailed in which gases containing 5 gr/sef of
particulates and 4 gr/sef of hydrochloric acid and chlorine vapors
were passed through such a system.  The cleaned effluent contained
only 0.009 gr/sef of particulates and 0.002 gr/sef of vapors.
(Author's abstract)


0277U                                                            91

V.B. Volkening


PERFORMANCE Of COATING ON NETAI. IN AN INDUSTRIAL ATMOSPHERE.
Preprint.   (Presented at the 56th Annual fleeting, Air
Pollution Control Association, Detroit, Mich., June 9-13,
1963, Paper No. 63-86.)


The reason and methods of procedure for a protective coating
testing program are discussed.  Results based on fifteen years
operation of such a program in a chemical plant on the
Gnlf Coast are described - sons in detail.  Atmospheric
contaminants from high humidity and moisture
condensation to chlorine and hydrochloric acid were encountered.
A method for calibrating the atmosphere is outlined.
Differences in the performance of several generic types of
coating resins are presented.  Generous references to the
literature are included.   (Author abstract)*f
02562                                                            92

I.I.  Vulikh,  Yu.A. Shivandronov,  H.K. Zagorskaya,
T.L.  Bogatyrev


FILTERING GAS HUSKS CONTAINING ION-EXCHANGE RESINS.
(Pil'truyushchii ionitovyi protivogaz.)  Hyg. Sanit. 31,  (3)
"H3-6, Bar. 1966.
   CFSTI:  TT66-51160/1-3


The absorption by ion-exchange resins of the following gases mixed
with air was tested for a wide range of concentrations and gas
velocities: asimonia, amines (H-for« of the cation-exchange resin
KO-2), sulfur dioxide, chlorine hydrochloric acid  (hydroKyl and
carbonate forms of the anion-exchange resins AV-17 and
BDE-10P).#f
                            Control Methods                           49

-------
07519                                                            93

N. Tamate


AIR POIltJTICW BT TOXIC GAS AND ITS COUNTER HEASOHE.   Text in
Japanese.  Kuki Seijo  (Clean Sir, j. Japan Air Cleaning
Assoc., Tokyo)   3(2):19-25, 1965.  5 refs.


The present status of, air pollution in Japan and its counter
measures are described according to the chemical composition of
the pollutlants:  sulfur oxides, nitrogen oxides, halogen
compounds, organic compounds, and solid particles  (dusts).  The
hourly variation of S02 concentration is graphed.  In Tokyo,
there is a peak around noon of about 15 pphm; N02 ranges
from 1 to 1.5 pphm with little variation.  Concentrations of
S02, NO, HO2, H2S, and CO were measured in Yokkaichi,,
Osaka and 0be as well as in Tokyo.  Graphs relating amount
of traffic to CO concentration show almost the same pattern.
Concentrations of HC1 and HF in the air are quite small
(0.35 ppa and 0.3-0.4 micrograas/cu B., respectively) near
chemical plants producing these gases.  Counter measures used
against the various pollutant emissions are:  the dry method,
vet method, activated carbon method for sulfur oxides; alkali or
oxidation method for nitrogen oxide; dry iron oxide and dry
absorption methods for H2S; and water washing method for
RC1 and HF.  Afterburner methods by sparking and heat
concentration are described for control of automobile exhausts.
However, problems encountered with the afterburner methods are
the high temperature required and nitrogen oxide increase.  The
equipment required is also rather large.  Another method employing
catalysts is described in which loam, molybdenum, white gold,
nickel or vanadium are used effectively.**
BO               HYDROCHLORIC ACID AND AIR POLLUTION

-------
                   EFFECTS - HUMAN  HEALTH
03821                                                            34

Back,  K.  C.


REVIEW OF AIP FORCE DATA FROH LONG TERM CONTINUOUS EXPOSURE AT
AHBI5NT PRESSURE.    In:   Proceedings of the Conference on
Atmospheric  Contamination in Confined spaces:  30 March - 1
April  1965,  Aerospace Medical Research tab., (6570th),
Bright-Patterson AFB, Ohio, Contract AF 33(657)-11305,
Proj.  6302,  ABBL-TP-65-230, p. 124-133, Fov. 1965.
   CFSTI, DDC:  RD 629622


Work which vas performed under Air Force sponsorship in the area
of environmental toxicology of space cabin atmospheres over the
past 5 years is described.  This work gave the warning that
materials in trace quantities could prove toxic when presented to
animals over long continuous exposure periods.  Four exposure
chanbers were constructed for this work.  This permitted nse of
one for a control group .of animals and three for contaminant
exposure chambers.  All animals were followed by a number of
clinical laboratory examinations before, during and following the
90-day exposure, and the animals were terminally given stress
tests  and then necropsied with both gross and microscopic
examination  of tissues.   Carbon tetrachloride, while not causing
death at 25  ppm, did cause serious clinical and microscopic liver
changes in all animals exposed.  The livers of the rats were so
much involved that the pathologist made a diagnosis of "cirrhosis".
Phenol caused absolutely no problems whatsoever at the 5 pps level
Hydrogen sulfide  (20 ppm) did produce death in rats and nice,
but none in  monkeys.  Methyl mercaptan  (50 ppn)  caused serious
problems and death in 40% of the monkeys and 43* of the Bice.
Tests  vere conducted to find out whether animals coald perform
strenuous tasks following the 90-day exposure and to compare the
long term, continuous toxicity of some propellants and propellent
types  in which the Air Force has an interest.  Hydrazine,
tinsymnetrical dimethyl hydrazine, nitrogen dioxide and
decaborane were tested as candidate materials.  The results are
discussed.*!
06048                                                             **

H. C.  Battigelli,   F. Hengstenberg,  R. J. Hannella,  and
A. P.  Thomas


HOCOCIIIARY  ACTIVITY.  Arch. Environ. Health 12(4):460-466
(April 1966).  (Presented at the 30th Annual Meeting,
Industrial Hygiene Foundation, Pittsburgh, Pa.,  Oct. 20-21,
1965.)


The mucociliary activity of respiratory epithelia, although well
known  over many years, has only quite recently assumed new
                                51

-------
importance, being recognized as one of the basic functions that the
respiratory apparatus applies in responding to unfavorable
environments.  Physical, chemical, and biological "noxae" have
been studied in their effects on the mucociliary activity of loner
animals, mammals, and in nan as well, with techniques that have
proved accurate and reproducible.  In this paper a brief review is
given of these methods and of the results of investigations
particularly related to the effects of air pollutants.  Results of
investigations on the effect of diluted diesel exhaust on the
tracheal escalator of ratr, are summarized.  in important finding
is that exhaust dilutions that are without measurable effect on the
respiratory resistance of human subjects are actually able to
induce changes in tracheal clearance in some of the animals exposed
for prolonged duration.  With higher levels of exposure tracheal
clearance of small mammals is affected with greater freguency.
The removal of animals from the exposure invariably restores the
original level of activity within a few days.  The particulate
content of the exhaust appears to play an important role in this
type of respiratory injury.  (Authors' summary)**

08749                                                           -36
CONCERNING THE QUESTION OF THE TOXICITY OF PLASTIC-LCW TEHPEEATOBE
CARBONIZATION PFODDCTS.   ((Zur Prage der Toxizitat von Kunst-
stoff-verschwelungsprodukten.))  Text in German.  Arch. Byg.
Bakteriol. (Munich), 150 (5):393-405, Sept. 1966.  20 refs.


The toxicity of the gaseous enissicn products from three different
types of materials during lew teuperature carbonization was de-
termined.  The material was burned in a specially designed com-
bustion chamber at 331 deg.  C., 423 deg. C., and 168 deg. C.
The addition of air in the low temperature tube was kept constant
at 300 1./hr., but was varied in the mixing chamber at 0, 100, 200,
and 300 1./hr.  Five white rats were used for each 30-min. test,
their behavior was closely observed, and blood tests and histolo-
gical examinations were performed.  The results of these tests are
presented in three tables.  During Mood carbonization, carbon
monoxide emission is the main danger, as determined by the COHb
values of the rats.  The toxic carbonization products from glass-
reinforced polyester, which strongly irritated the lungs, will have
to be determined by further chenical investigation; hydrochloric
acid was the main irritant frcm the low temperature carbonization
of polyvinyl chloride.

18027                                                            97

Ccrnish, Herbert H. and Ellen 1. Abar


TOXICITY OF PYHC1YSIS PBODOCTS OF VINYL PLASTICS.  Arch. Environ.
Health, 19(1):15-21, July 1969.  12 refs.


Polyvinyl chloride polymers and femulations were pyrolyzed in a
stream of air by gradually raising the temperature from ambient
to approximately 600 C.  The  pyrolysis air stream was diluted
with twice its volume of rocs air, and rats were exposed to it.
Exposure to an air stream containing the pyrolyzed products of 1
to 2 gm of polyvinyl chloride polymer resulted in the death of
50 percent of the animals.  Host deaths were due to carbon nonoxide
52               HYDROCHLORIC ACID AND AIR POLLUTION

-------
 (CO), and carboxybemoglcbin  (CCHb) levels correlated well  with  the
amount of plastic pyrclyzed.  Little histological evidence  of lung
damage was evident.  When oxygen  (02) was added  to the air  stream
to prevent deaths from CO, pulmonary edema and interstitial
hemorrhage developed.  The lungs  of some animals exposed to high
levels of pyrolysis products cf vinyl chloride-vinyl acetate
copolymer also showed focal edema and intra-alveolar hemorrhage.
Polyvinyl chloride fcrnulaticns,  containing additives and  inert
materials, were in general less tcxic per gram of sample pyrolyzed.
 (Author's Abstract)

11366                                                             aa

V.K. Efimova
THE HYGIENIC EFFECT OF  AVERAGE THENTY-FCOR  HOUR  ALLOWABLE
CONCENTRATIONS OF CHLORINE  AND BYDECCHLCBIDE GASES
SIHULTANEOUSIY PRESENT  IN ATMOSPHERIC  AIR.   In:  Haximum
Permissible Concentrations  of Atmospheric Pollutants,
Book 8, V. A. Eyazanov  and  B. S. Gol'dberg  (eds.).
Translated from Russian by  E. s. levine, U. S. S. F.
Literature on Air Pollution and  Related Occupational
Diseases, Vol. 15, pp.82-85,  1968.   ((16))  refs.
   CFSTI:  PE 179110


The health effects of simultaneously present chlorine  and
hydrochloride gases in  atmospheric  air was  studied  experimentally
with guinea pigs.  Chronic  exposure of guinea  pigs  to  the
inhalation of air containing  simultaneously chlorine gas  in 0.1  mg/
cu m concentrations had no  substantial effect  on  the general
condition, weight, blood composition,  and bone narrow  henopoiesis
of the experimental guinea  pigs.  No changes suggestive  of
induced pathology were  fcund  in  the organs  of  any of the
experimental guinea pigs belonging  either to the  control  or
experimental groups,  it is recommended that the  previously
adopted limits of allowable 0.03 mg/cu m of chlorine gas  and 0.015
mg/cu m of hydrochloride gas  should be retained  without  any
revision.#t
05942                                                             99

E. V. Elfimova
DATA FOR THE HYGIENIC EVALUATION OF HYDROCHLORIC ACTD AEROSOL
(HYDROCHI.ORIDE GAS) AS AN ATMOSPHERIC POLLUTANT.    (In:
Limits of allowable concentrations of atmospheric pollutants.
Book 6.)  U.S.S.R. Literature on Air Pollution and  Related
Occupational Diseases. Vol. 9. pp. 18-28.  (1962).   Russ.
(Tr.)


It was shown that 0.1 mg/cu.m. is the concentration of threshold
hydrochloric acid aerosol odor perception, that 0.05 mg/cn.nu is
the odor non-perceptible concentration, that 0.6 mq/cu.n. is the
concentration of threshold reflex effect on optical chronaxy, and
0.2 mg/cu.m. the concentration of threshold reflex  effect on eye
sensitivity t'p light.  The concentration of threshold effect on
fligito-vascular tonicity is 0.5 mg/cu.m., and the threshold
concentration of change in the rhythm and depth of  respiratory
movement is at 0.1 mg/cu.n. of the aerosol.  On the basis of the
above results it is recommended that 0.05 mg/cu.m.  be accepted as
                         Effects - Human Health                        53

-------
the limit of allowable single concentration of hydrochloric acid
aerosol in. atmospheric air.  Results of this investigation
indicated that 10 mg/cu.n. of the aerosol, representing the limit
of allowable concentration for working premises, elicited sharp
shifts in the physiological reactions.  The method used for the
deternination of hydrochloric acid aerosol in atmospheric air can
be applied to the deternination of the aerosol in the presence of
H2SO4. aerosol and in the presence of free chlorine and chlorides.
The present investigation indicated that atmospheric air in the
vicinity of a magnesium plant is highly polluted with hydrochloric
acid aerosol, that such air pollution extended over considerable
distances from the magnesium plant, and that the sanitary
protection zones around magnesium plant discharging hydrochloric
acid aerosol, in the absence of gas purifying equipment, should be
in excess of 3,000 m.  Plans for future magnesium plants should
mandatorily include provisions for the installation of hydrochloric
acid absorbing equipment.tf
07162                                                             100

B. G. Ferris, Jr.  and H. R. Frank


AID POLLUTION AND DISEASE.  Snesthesiology 25 (4):470-478
Aua. 1961.


atmospheric pollution can be classified under three headings:
general, occupational and personal.  'The components are complex
and variable so that it is difficult to extrapolate the prevalence
of disease in one,area to that of another unless the two have
similar chemical compositions.  Significant exposures can occur at
work and nay produce impairment of respiratory function.  It is
emphasized that tobacco smoking, and particularly cigarette
smoking, is a most important factor in the causation of chronic
nonspecific respiratory disease.  Much research has been done to
elucidate the mechanism whereby such changes are induced but
specific answers concerning the mechanisms have not been
forthcoming.  Tables are included showing types of atmospheric
pollution; comparison of Los Angeles and London types of
pollution; categories of airborne materials with selected examples
that may occur in industry and that nay cause disease; age
standardized rates of respiratory diseases by tobacco usage and
sex; age standardized rates  {*) of respiratory disease by current
cigarette smoking habits and sex.t*

11479                                                             101

Gosev, H. I.  and f). S. Gil'denskiol'd,  B. K.  Baikov,
and E. V. Elfimova


DETERBIB1TIONS OF THE COHBIHBD EFFECT OF TOXIC  SUBSTRHCES IH
PREDICTIONS OF ATHOSPHEHIC POLLOTIOH.    ((Ob nchete suanarnogo
deistviya tokischeskikh  veshcbestv  pri  prognozirovanii
zaqryazneniya vozdushmogo basseina.))   Hyg. Sanit.  (English
translation of:  Gigiena i Sanit.),  33 (4-6):88-80,  April-June
1968,   ((17)) refs.
   CFSTI?  TT 68-50449/2


Several  investigations of the combined  effect  of several
pollutants  present simultaneously in  the  atmosphere have  been
recently Bade.  The  results  are listed.   The data  provide
54                HYDROCHLORIC ACID AND AIR POLLUTION

-------
convincing proof that as a rule the combined effect of toxic
substances in the atmosphere at the levels of  liuinal and
subliminal concentrations are in accordance with the principle
of sinple summation.  Data from many specialized institutes and
organizations suggest that in most cases calculations of the
expected atmospheric pollution are based on the maximum permissible
concentrations established for individual pollutants, so that the
results of mathematical determinations are compared only against
such standards.  There is a definite gap between theory and
practice in the establisheont of standards for atmospheric
pollutants and the application of its recommendations.  It is a
matter of common knowledge that the implementation of the necessary
hygienic measures at an operating enterprise is undoubtedly more
complex and difficult than the prevention of marked air pollution
at the planning stage.  All these considerations point to the
necessity for the planner to take account of the complex effects
on man of any combination of industrial pollutants discharged into
the atmosphere.  The results of comprehensive  investigations
of the reflex effects produced by combinations of substances and
the largely uniform findings of such investigations make it
possible to recommend, with a high degree of reliability, that for
practical predictive purposes the approved formula for calculations
of combined effects should be extended to all  combinations of
substances present in discharges from a specific industrial
enterprise or a complex of enterprises.ft

01741                                                            H>2

E. Kastromatteo


HFALTH ASPECTS IN FIRE FIGHTING (PART 1).   Firemen 33, (6)
20-1,  Aug.  1966.


In the course of their work, fire fighters are exposed to a
variety of toxic Zire gases and other adverse  health factors.
Quite often they are required to enter buildings, confined spaces,
and other places where they may be exposed to  extremes of heat, to
smoke, to oxygen lack, and to toxic gases created by the combustion
process.  The physical exertion, excitement and anxiety involved
in many fire situations -add to the health problems by increasing
the breathing and heart rates.  Fire fighting  therefore can
place severe demands on the respiratory, cardio-vascular and
nervous systems.  Some of the chief health hazards encountered in
fire fighting are discussed.  Beference is also made to a
special study of heart and lung disease in fire fighters.  (Author
summary)ft
11378                                                            103

Helekbina, V. P.


THE PBOBIEH OF COBBINED ACTION OF THBEE MIHEKAL ACIDS.  In:
Biological Effect and Hygienic Significance of Atmospheric
Pollutants, Book 1/9, V. A. Byazanov and H. S. Gol'dberg
(eds.). Translated fron Bussian by B. S. Levine,
0. s. S. B. Literature on Air Pollution and Belated
Occupational Diseases, Vol. 16, pp. 76-81, 1968.  ((6)) refs.
   CFSII:  PB 179141
                          Effects-Human Health                       5$

-------
The following concentrations  of odor perception thresholds was
established:  0.80  mg/cu  n for sulfuric acid, and 0.40 »g/cu a for
hydrochloric acid;  corresponding  H-icn equivalents are as follows:
O.C1099,  0.01203. and  0.01053 mg/cu m.  Any conbination of 2 or  3
acids  was clearly odor perceptible if the sun of their
concentration fractions in corresponding relation to  their
individual threshold concentrations exceeded unity.   Perceptible
concentrations expressed  in H-ions exceed the 0.01 gg/cu •
level.  Threshold reflex  effect concentrations, as studied by
eye adaptation to darkness, were  en the level of threshold odor
perception, or just above it.  The reflex effect of nitric,
sulfuric, and hydrochloric acids  in atmospheric air of
inhabited areas is  a condition of H-ion concentration.  The
sanitary-hygienic condition of atmospheric air containing nineral
acids  can be reliably  evaluated en the basis of H-ion
concentration for the  sun of  the  three acids under consideration
as well as for each acid  individually based on the H-ion index
should not exceed 0.010 ng/cu m.M

071U2                                                          10^

Hel'nikova,  F.  A..


THE TOXICTTY OF TITANIO« TETPACHIOBIDE.    O.S.S.R.
Literature on air Pollution and -Belated Occupational
Diseases,  Vol.  1:122-127, Jan. 1960.  (Also published in
Gigiena i Sanit.,  23(5):27-31, 1958.)   Translated from
Russian.
   CFSTI:   TT 60-21049
Previous investigation indicated that the toxic effect of
titanium tetrachloride was defined by its property to hydrolyse to
HC1.  with this assumption in mind, this study was of the
nature of a comparative investigation.  The toxicity of HC1 in
statu oascendi and the toxicity of the aerosol formed by
Ticl« in the process of its hydrolysis were compared.  Bice were
placed into a chamber of 12 liter capacity and exposed to the
action of HC1 obtained from NaC1 heated in strong H2SOU, the
HC1 was introduced into the exposure chamber at the aoment of its
formation thronah a special opening in the chamber wall.  The
toxic effect of titanium tetracholoride was determined by its
property to form HC1 (gas)  which under specially developing sets
of physico-chemical conditions is able to permeate into and act
upon the deeper lung tissues.  Fesults of the study showed that
the formed Ti aerosol possessed more intensive toxic properties
than pure HC1.  Accordingly the limit of allowable concentration
of HC1 formed as a result of TiC1U hydrolysis should be set at
a level below the one adopted for pure HC1.lt

01916                                                          10$

V. A. Rjazanov.


CRITERIA AND METHODS FOR ESTABLTSHIHG BAXIBDB PERMISSIBLE
COBCENTBATIORS OF £IH POLLUTION.   Bull. Borld Health Organ.
(Geneva) 32, 389-98, 1965.


Experience in the USSR in establishing standards for air
pollution control is described.  Tt is emphasized that health
56                HYDROCHLORIC ACID AND AIR POLLUTION

-------
considerations must be main criterion in deciding permissible
concentrations, which constitute the "hygienic" standards
ultimately to be achieved.  Economic and technological reasons may
dictate temporary "sanitary" standards, which modify the
requirements for a limited period.  "Technological" standards
relate to the economic and technological consequences of air
pollution and do not concern health.  The maximum permissible
concentrations of toxic substances used in toxicology and
industrial hygiene are not sufficiently stringent for general use,
and control standards are therefore based on the results of tests
carried out on animals and human subjects.  Tests on animals show
that certain concentrations of toxic substances cause functional
changes (e.g., in higher nervous activity, cholinesterase
activity,  and excretion of coproporphyrin) as well as a number of
protective adaptational reactions.  The results are used to
establish maximum permissible concentrations of pollutants within
a 24-hour period.  Tests on human volunteers provide a basis for
determining the maximum average concentrations at a given time.
Eeactions to odorous substances give the olfactory threshold and
the level of concentration causing respiratory and visual
reflexes,  as well as subsensory effects such as changes in light
sensitivity and in the activity of the cerebral cortex.
Morbidity statistics also provide evidence of harmful pollution,
but cannot serve as a basis for establishing maximum permissible
concentrations, which should aim not only at preventing illness
but also at avoiding pathological and adaptational reactions.
(Author abstract)4#

04932                                                            106

F. P. Smith,  R. E. Gosselin,  J. A. Henderson,  and D.
H. Anderson
CCHPASISON OF THE ADSORPTIVK PEOPEBTIES OF ACTIVATED CHARCOAL AND
ALASKAN nONTMOffTLLONTTE TO" SO«E COMRON POISONS.   "^OXicol.
Appl. Pharmacol. 10,  (1) 95-10U, Jan. 1967.   (Presented in part
at the Ninth Annual Meeting, American Association of Poison
Control Centers, Chicago, 111., Oct. 24,  1966.)


Activated charcoal and our own preparation of  Alaskan
lontmorillonite have been compared in vitro with respect to their
adsorption isotherms at 37 degrees for six common poisons.  When
evaluated on the basis of the maximum adsorption capacity and
dissociation constant in 0.1 N HC1  ("artificial qastric juice"),
montmorillonite absorbs d-amphetamine, tripelennamine, ferrous
sulfate, and ethyl alcohol about as well  as activated charcoal.
With substances which are not ionized at  the pH of gastric
juice, notably salicylic acid and pentobarbital, a 100-fold
difference in dissociation constants and  a 3-  to 13-fold
difference in absorption capacities occur in favor of charcoal.
Both absorbents are expected to dissociate free salicylate if
allowed to pass into the intestinal tract.  When the pH rises
from 1 to 7.1, the dissociation constant  of the
salicylate-charcoal complex increases 5-fold and the capacity
decreases 3-fold.  Over the same pH range, however, the
nontmorillonite-salicylate complex increases its dissociation
constant more, than 10-fold and decreases  its capacity more than
50-fold.  Despite its less acceptable appearance, activated
charcoal is judged to be superior to montmorillonite as a
gastrointestinal adsorbent for general clinical use in acute
poisonings.  (Author summary) ff#
                         Effects - Human Health                        57

-------
059 «&                                                           183

Stayzhkin, V. n.


HYGIENIC DETERRINATION OF LIMITS OF ALLOWABLE CONCENTRATIONS OF
CHLOBINE AND HTDHOCHLOBIDE GASES SIHULATEHODSLT PRESENT IN
ATHOSPHERIC AIR. (In:  Limits of allowable concentrations of
atmospheric pollutants. Book 6.)  O.S.S.R. Literature on Air
Pollution and Related Occupational Diseases, Vol. 9, pp. 55-61.
(1962).  Russ.  (Tr.)


This study was confined to the use of low concentrations of
chlorine and hydrochloride gases and their effect on the
physiological reactivity of nan.  The methods of investigation
were: determination of threshold odor perception, optical chronaxy
and adaptometry.  Results of this investigation indicated that 0.75
mg/cu m was the concentration of threshold chlorine odor
perception, and 0.02 mg/cti m the concentration of threshold
hydrochloride gas odor perception.  The simultaneous presence in
the air of chlorine and hydrochloride gases was not odor
perceptible when the qases co-existed in the following ratio
concentrations: 0.3 mg/cu m of chlorine and 0.1 mg/cu • of
hydrochloride gas, also 0.2 ng/cu m of chlorine and 0.13 ng/cu m
hydrochloride gas.  The additive physiological and neurological
effects of simultaneously present chlorine and hydrochloric gases
in the air were in the nature of arithmetical summation. Optical
chronaxy tests indicated that threshold reflex effects were
produced by chlorine and hydrochloride gas simultaneously present
in the air in the following ratio combinations:  chlorine, 0.3 mg/
cu n and hydrochloride gas, 0.3 mg/cu m and also chlorine, 0.3 mg/
en m and hydrochloride gas, 0.3 mg/cu m.  Tests of eye sensitivity
to light indicated that the combination of 0.2 mg/cu m of chlorine
and 0.1 mg/cn m of hydrochlorinde gas constituted a threshold
combination mixture of the 2 gases which elicited changes in eye
sensitivity to light.  The present investigation also indicated
that the previously adopted limits of allowable single chlorine
concentration of 0.1 mg/cu m and of hydrochloride gas of 0.005 mg/
en m simultaneously present in atmospheric air were below the
threshold of odor perception and of effect on reflex activity.

21078                                                            108

Styazhkin, v. a.


EXPERIMENTAL BASIS FOB THE DETF.RHINATIOS OF A1LOHABLE
CONCENTRATIONS OF CH10RINE AHD HCL GAS SIHDLTANEOnSII PRESENT IN
4THOSPHERIC AIR.  U.s.s.E. literature on Air Pollution and Related
Occupational Diseases, vol. 8:158-164, 1963.  (B. S. Levine, ed.)
   CFSTI:  63-11570


An experimental basis for the determination of allowable
concentrations for simultaneously present chlorine and HC1 gas in
the ambient air was obtained.  Studies were conducted in the
vicinity cf a magnesium plant at 30G, SCO, 800, 1000, 2000, and
3000 m from the plant.  Air samples were collected by the
aspiration method through an abscrber equipped with a porous
plate No. 1.  One absorber was filled with double distilled water;
tbe other was filled with an acidified solution of methyl orange.
Air samples collected through double distilled water were used
58                HYDROCHLORIC ACID AND Al R POLLUTION

-------
for the determination of BC1 aerosol by the titration method.
Sulfuric acid, which interferred with analysis, was deternined
nepaelometrically and subtracted frcm the titration result.
Chlorine was determined colorinetrically in the sample.  Results
showed that chlorine and Bel gas concentrations were considerably
in excess of the allowable uaxiaal single concentration Unit
at all collecting points.  The threshold of Cl -odor preception
was 0.7 mg/cu ID and of HC1 gas, 0.2 mg/cu m.  Threshold odor
perceptions of Cl and HC1 gas simultaneously present in the air
Here established in the following combinations:  0.3 ng/ca m Cl,
0.1 mg/cu m and 0.2 mg/cu m Cl, 0.13 mg/cu n HC1.  Results of
the tests by the optical chronaxy aethod established the
threshold of reflex effect of Cl and BC1 gas siaultaneously
present in the air in the following concentration:  0.3 mg/cu m
Cl, 0.2 ng/cu m HC1 and 0.2 ng/cu m Cl, 0.3 ng/cu m HC1.  The
limit of maximal single concentration for Cl was 0.1 ng/cu B and
for HC1, 0.05 og/cu m.  The simultaneous presence-of Cl and BC1
gas in the air in corresponding concentrations had no effect on
the control curve of dark adaptation.  Results showed that the
concentrations were below the threshold of odor perception and
reflex effect and below the allowable concentration limit.
                         Effects - Human Health                        59

-------
             EFFECTS - PLANTS AND LIVESTOCK



09275                                                           109

Bohne, Helmut


IBHISSION DAMAGE CAUSED BY HOSPITAL BASTE IHCIHEF.ATION.    STAOB
(English translation), 27 (10) : 28-31, Oct. 1967.   U refs.
   CFSTI:  TT 67-514C8/1C


The strong decolorization and  whitening of plants observed in two
gardening nurseries were caused by hydrogen chloride.   In both
cases the sources of emission  were refuse incineration plants of
hospitals in which chlorine compounds in the refuse, consisting 80-
90 percent of paper and packaging naterial, were deconposed
during short periods at a temperature of 800 - 1,000 deg C.
Erection of chlorine washing plants appears, therefore,  to be
necessary.  (Author's summary) I*
06326

8. w. Heck,  L. S. Bird,  H. E. Bloodworth,  H. J.
Clark,  D'. P. Darling,  and M. B. Porter


UNVIBOHBTiNTAL POLLUTION BY MISSILF PROPELLANTS.  Texas
Agricultural and Hechanical Besearch Foundation, College
Station.  Apr. 1
-------
21691                                                           111

Heck, Walter H., Bobert H. Daines, and Ibrahim J. Hindawi


OTHER PHYTOTOXIC POLLUTANTS.  In:  Becognition of Air Pollution
Injury to Vegetation:  A Pictorial Atlas.  Jay S. Jacobson and
A. Clyde Hill  (eds.), Pittsburgh, Pa., Air Pollution Control
Assoc-, 197C, p. F1-F2II.  54 refs.


The effects of several phytotoxic pollutants are considered.
Ethylene acts as a growth horncne; it causes a reduction in
growth, stimulates lateral growth, and decreased apical dominance.
Plant leaves nay develop epinastj or show chlorosis, necrosis, or
abscission.  Injury from cxidants other than ozone, PAH, or
nitrogen dioxide may be chronic or acute.  These oxidants, none
of which have been identified, may cause necrosis, collapse of
leaf tissue, and dehydrated and bleached lesions.  Cotton leaves
affected by herbicides show a yellow-green mottling or stippling
and vein clearing may be pronounced.  Tomatoes may show epinasty
and twisting of plant parts.  Arsenic trioxide injury on
sensitive fruit and vegetable crops produces necrotic spots on
the leaves, petioles, twigs, and fruits.  Bild to severe
interveinal necrosis and chlorosis may cccur on broad-leaved
plants as a result of atrazine.  Necrosis, chlorosis, and
epinasty are the common synetcns of chlorine injury.  Acute tissue
collapse and necrotic spotting have resulted from ammonia injury.
Discoloration of peach and apple fruits have also been repotted.
Hydrogen chloride caused an acid-tyte necrosis.  Tipburn to fir
needles and necrosis along leaf margins have also been noted
after HCl exposures.  Mercury causes chlorosis, abscission of
older leaves, growth reduction, and general poor growth and
development.  The effects of particulates, hydrogen sulfide, and
carbon monoxide are briefly discussed.

12195                                                            112

Hukammal, E. I., C. S. Brandt, B. Neuwirth, D. H. Pack, and
V. C. Swinbank


Alfi P01LDTABTS, METIOROLOGJ, AND PLANT ISJOBY.  Horld
Meteorological Organization, Geneva, Switzerland, Commission
for Argicultural Meteorology, HBO-TS 96, WHO-No. 233.TP.127,
73p., 1968.  177 refs.


The problem of air pollution injury to agriculture and the
present state of knowledge is reviewed in order to assist
meteorologists and others concerned in seeking means of
preventing or controlling the extent of injury.  "The source
of various contaminants and their chemical reactions in a
contaminated atmosphere are examined in detail.  The
variations in  the susceptibility of plants to air pollution
damage as related to meteorological and other factors in  the
plant environment are described.  These factors, nany of.
which exert their influence through their effect of stomatal
movement, include light, nutrition, exposure, relative
humidity, and  temperature.  The  recognizable symptoms of  air
pollution injury are discussed and suggested for indentifying
the causative  agent and recognizing similar symptoms produced
by other disorders are given.  A section on air  pollution
62                HYDROCHLORIC ACID AND Al R POLLUTION

-------
 meteorology states that  knowledge of the atmosphere's ability
 to  transport  and dilute  contaminants cannot be applied  to  air
 pollution  problems without concurrent  consideration of  pollutant
 emissions and the biological  sensitivity and response
 characteristics of certain plants,  the effects  of surface
 configuration on diffusion,  to vertical and horizontal  turbulent
 diffusion, atmospheric transport, research  problems, and
 meteorological applications  to air  pollution problems are
 discussed.  'Present  and  possible future programs in the
 prediction of pollutant  concentration, air  pollution potential,
 and pollution damage are reviewed;  the general principles
 involved in collecting and analyzing air samples to determine
 the nature and concentrations  cf pollutants are  outlined.
 Control measures and the present situation  are also discussed.
 (Author summary modified)
 02541
 (SCIENTIFIC METHODS AND TECHNIQUES TO DECREASE THE POLLUTION OF
 THE ENVIRONMENT, TPBOURH TNHAI8TICN OB ISGESTION, ' AND OF
 ACOUSTICAL "NUISANCES.")    Hoyens scientifigues et
 techniques de diminuer la pollution des milieux inhales ou ingeres
 et des "nuisances" acoustlgues.   (Chapter 3:  les pollutions
 et "nuisances" d'origine industrielle et urbaine.  Tome 1.  Leur
 prevention et les problems  scientifigues et techniques qu'elle
 pose en France.)  Premier Hinistre, Delegation qenerale a la
 recherche scientifique et technique.  June  1966.  pp. 17-59.


 The functioning of chlorophyll in the course of photosynthesis in
 leaves of plants serves as  a method of air  purification of
 sufficient importance to consider its use in control.  Vegetation,
 like men and animals, can sustain a considerable amount of damage
 to the point where the threshold limit of absorption of toxic
 substances is exceeded.  The three gases causing the most
 damage to vegetation are carbon monoxide, the sulfur oxides, and
 those containing fluorine.  Also to be considered are acid
 "smog", toxic "smog", ozone, and nitrogen oxides,  other
 industrial .pollutants which have a toxic influence, but less
 sever and localized, are dusts, hydrogen snlfides, hydrochloric
 acid, etc.  Ethylene and carbon monoxide .cause great damage to the
 growth hormones, particularly auxin.  The effects of SO2,
 S03, and H2SOU are related  to the guanity of gas emitted, the
 degree of resistance of the species, their  state of development,
 and the various environmental conditions.   The sensitivity of
 vegetation to the action of sulfur gases varies essentially as a
 function of the speed of absorption of the  gas by the leaves.
Through experimentation it  has been found that the plant species
 which are most sensitive to S02 are chickweed, alfalfa, barley,
 oats, wheat, rhubarb, lettuce, endive, spinich, cabbage, and
tobacco.  Apples, apricots, peaches, grapes, corn, and beans are
 less sensitive, whereas the floral species  such as gladiolus, rose,
and lilac offer considerable resistance.  Aquatic vegetation is
often used as purifying means for polluted  streams.  Subsoils
purify themselves of pollutant materials in various ways, including
uptake by vegetation and dispersion in the  soil with rain water,
etc.  In a section on means of decreasing the inhaled pollutants
the following are mentioned:  dust collectors, normal methods of
dispersion in the atmosphere, fumes from domestic fires, auto
                      Effects - Plants and Livestock                     63

-------
exhaust fumes, fuel additives, inproveneot of combustion in
engines, recycling of crankcase gases, post-combustion appliances,
and redesigning of motors.  Also given in this section (Chapter
3)  is some similar information on ingested pollutants and on
problems of noise.**

05871                                                           114

K.  T. Semran
EMISSION OF FLUORIDES FROM INDUSTRIAL PROCESSES - & REVIEW.
0. Air Pollution Control Assoc. 8, (2) 92-108, Aug. 1958.
(Presented at the 130th Meeting, American Chemical
Society, Atlantic City, N.J., Sept. 1956.)


Fluorine contaminants nay be emitted to the atmosphere by a wide
variety of industrial processes in which fluorine compounds
are manufactured, utilized as catalysts or fluxes, or are
present as impurities in the process materials.  In some
cases, the possibility of contamination is obvious, and
control measures are generally provided as a natter of
course.  These include manufacture of HF, use- of HF as an
alkylation catalyst in the manufacture of motor fuels,
and use of elemental fluorine.  However, some of the most serious
cases of pollution have arisen from processes in which
fluorine compounds are used as fluxes or are present as
impurities.  In some instances, the fluorine has been
present in the process material in a concentration so low
that its presence was not considered to constitute a potential
problem, or perhaps was not even recognized.  Fluorosis in
cattle, or damage to vegetation, ahs occurred primarily
in the vicinity of plants manufacturing phosphate fertilizers,
aluminum, brick, enamel frit, and iron and steel.  Maclntire
considers that the most important sources are probably the
manufacture of phosphate fertilizers, aluminum, and steel.
Thermodynamic considerations and a review of the literature
indicate that the principal mechanism of liberation of fluorides
in high temperature processes is pyrohydrolysis, which
results in formation of HF.  The principal variables
in pyrohydrolysis in most industrial processes appear to be the
equilibrium of the reaction, the water vapor concentration
in the process atmosphere, and the factors determining mass
transfer.  Reaction rates appear to be generally high,
although little information is available.  Significant formation
of SiFft appears to be. limited to cases involving
thermal decomposition of fluosilicates or reaction of fluorides and
silica with acids at relatively low temperatures.  Formation of
volatile metal fluorides may be a significant mechanism
of liberation in some cases, but is generally of less
importance than pyrohydrolysis.  By analogy to known cases,
it should be possible to make order-of-magnitude estimates
of the probable fluorine emissions from a given process
if the quantity of input fluorine is known or can be estimated.**
64                HYDROCHLORIC ACID AND AIR POLLUTION

-------
                     EFFECTS - MATERIALS
16U04                                                           115

Barton, K. and S. Bartonova


MECHANISM OF THF COBPOSIOK OF FE, ZS AND CD IH A HUHID
ATHOSPHEBE CONTAINING HCL VAPORS.   (Hechanismus der Fe-, Zn-
und Cu-Korrosion in feuchter HCl-Daempfe enthaltender at&osphaere).
Text in German.  Collection Czech. Chen. Coumu.  (Prague).
32(7):2«31-2a38, 1967.  6 refs.


Steel containing a snail amount of carbon, electrolytic zinc,
and electrolytic copper in the fern ct thin plates 30 by 80 no «ith
a thickness between 0.8 tc 1 mm were used to study the corrosion
mechanism at temperatures of 20, 30 and HO C; -a relative hunidity
of 8015; and an HC1 content of 0.0007 to 0.00256 (by volume).  The
stationary state characterized by constant quantity and composition
of the corrosion products and a linear dependence of the corrosion
on time was established.  After the stationary state had been
reached, the corrosion kinetics iron were goverend by HC1
formation daring the rust development.  Bith the zinc sanple,
the corrosion speed decreased after the stationary state had been
reached,  this Has due to a reaction of the hydroxide and the
alkaline zinc chloride with HC1, vhere soluble ZnCl2 is forned.
The speed of this process is influenced by the transport of the
gaseous BCl to the boundary atmosphere/corrosion product, as well
as by the adsorption and composition of the product.  With the
copper sample, the decisive partial process of the corrosion
kinetics in the stationary state was the destruction of the CuCl
layer covering the Cu20 layer.  The process is likewise determined
by the transport of the gaseous BCl to the boundary atmosphere/
corrosion product, by the BCl adsorption, and the composition
of the product.

17775                                                           I*

Einger, W. 8., R. H. Wagner, and B. H. Broun


RESISTANCE OP SLDBISDH AILOXS TO CHEHICAILY CONTAMINATED
ATHOSPHEBES.  Corrosion, 9 (12):««0-Utt7, 1953.  15 refs.
(Presented at the Ninth Annual Conference, National Association of
Corrosion Engineers, Chicago, 111., Barch 16-20, 1953.)


Of the many factors connected with atmospheric corrosion problems
in chemical plants, refineries, and other industries, those
encountered most often are combinations of hydrogen sulfide,
carbon dioxide, sulfur dioxide, hydrogen chloride, moisture and
dirt.  In general, it has been found that aluninuo alloys are
resistant to atmospheres containing these contaminants.  In
addition, the problen in most plants is further aggravated by the
formation of dust and/or fuaes.  An active laboratory as sell as

-------
 field  testing  program  is  continuing  to  deionstrate  that aluiinua
 alloys of  the  type  used for  architectural applications are  very
 resistant  to corrosion by a  wide  variety of  organic and inorganic
 chemicals.  The  use of aluioinura-tase alloys  in  the  coke,  soda, ash,
 sulfur,  power, paper,  salt,  petroleum and petrol-chemical
 industries  has reduced corrosion  losses with resultant savings ia
 maintenance costs.   Some  of  the applications where  aluminum
 alloys have proved  successful are tank  roofs, siding, roofing,
 windows, duct  work,  ladders, handrail,  instrument tubing, and
 tread  plate.   It is believed that through cooperative field
 testing  it  will  be  possible  tc demonstrate many additional
 applications in  these  and ether industries where aluminum alloys
 can be used to advantage,  A scund,  practical installation  can
 best be  obtained by taking advantage of all  the information and
 experience  that  is  readily available.   (Author  abstract modified)

 15657                                                           117

Fink, Ferdinand


THE COMBUSTION 0? DOMESTIC REFOSE COHTAIHIHG A  HIGH PROPORTION OF
SYNTHETIC HATEBIALS.   (Verbrennung von  Hausmuell nit hoeheren
Kunststoffanteilen).  Text in German.   Brennstoff-Waerme-Kraft,
21 (9):»72-«76, Sept. 1969.  8 refs.


The domestic refuse in the city of Zurich contained 1.1 to  2.7X
by weight of synthetic material in the  years 1963 and 196U, as
compared with other large cities  where  it contained 4 to  5%.  In
Germany, half of the synthetics in domestic  refuse are composed
of polyvinyl chloride  (PVC).  The relatively low PVC fraction in
the waste causes corrosion problems.  Polyvinyl chloride  begins
to melt at  120 C; at 200 C, it begins to separate.   It has a
heating value of 6000 kcal/kg; the ignition  point is H60  C,
Domestic refuse  is  incinerated with  a large  amount of excess air.
The heterogeneous waste composition  causes a fluctuating
combustion  process.   Thus, the waste gas composition varies as
follows:  7 to 11*  by volume CO,  10  to  1615 water vapor, 6 to 10*
oxygen, and 0.2  to  1.0 q/cu m HC1.   Varying  gas composition and
fluctuating temperatures damage the  oxide layer on the steel
pipes.   There are two types of corrosion:  sulfate corrosion and
chlorine corrosion.   It is generally thought that sulfate
corrosion is due to alkali pyrosulfates which,  when superheated,
yield activated  S03.  The  latter  substance is highly corrosive.
Chlorine corrosion  is due  to the  presence of HCl.   In oxidizing
waste gases, HCl attacks  only metal;  in reducing waste gases,
iron oxide and dust incrustations may adsorb HCl, which is
liberated again at  higher  temperatures.   The chlorine gas and the
HCl which develop in this  manner are both highly corrosive after
desorption.  To  prevent chlorine  corrosion,  large amounts of water
vapor must be present in  the waste gas.   Injection of water into
the combustion chamber helps to fulfill this demand.  Furthermore,
reducing components in the waste  gas  must be avoided.  The
temperature at the  pipe wall should  never exceed <»00 C.

19325                                                            118

Konda,  KiyosM,  Hisao Ito, ana Atsuhiro Honda


FIELD EVAIDATION OF EXHAUST GAS PBOB BEJUSE  INCINERATOR RELATED TO
AIB POLLUTION AND METAL COBROSICN.  Trans.  Soc. Heating,
66                HYDROCHLORIC ACID AND AIR POLLUTION

-------
 air-conditioning,  and  Sanitary  Engrs.  (Japan).  vol.  7:95-10«,
 1969.


 A study of  municipal incinerator  exhaust  gas  composition  conducted
 at five sites-in Japan is  described.   The study vas  undertaken  to
 obtain information on  odor and  metal  corrosion  problems.   The
 exhaust consisted  of sulfur oxides,  nitrogen  oxides, ammonia,
 sulfuric acid,  nitric  acid, organic acids,  and  hydrochloric acid.
 Volatile organic acids and hydrochloric acid  are mainly
 responsible for the corrosion,  with  sulfuric  and nitric acids only
 partially concerned.   Percentages of  exhaust  products as  a
 function of raw refuse input are  tabulated.   Continuous firing
 rather than batch  firing would  limit  noxious  effluents.
 Temperature and excess air control would  also help.   After-burning
 chambers should be installed tc farther reduce  contaminants.

 16081                                                            119

 laengle. Bruin


 INVESTIGATIONS  OF THE  COBBOSICB-CAUSIBa PBOFEBTIES OF  VOLATILE
 ACIDS AND ANHYDROUS ACIDS.    (Cntersuchungen ueber die
 netallangreifenden  Eigenschaften  von fluechtigen  Saeuren  und
 Saeureanbydriden).  Text in  German.  Eidgenoessische Technischen
 Hochschule, Zurich, Switzerland,  Thesis (PhD),  1968, H3p.   64
 refs.
   CFSTI:   H69-32307


 The corrosion-resistances  of  iroor zinc,  aluminum, copper,  and
 lead to chemical attacks frcm hydrochloric acid,  hydrogen  sulfide,
 formic acid, acetic acid vapors,  and sulfur dioxide  atmospheres
 were studied.   Emphasis was  placed on  the problems of  critical
 vapor humidity, analytic determination of corrosion  products, and
 the reaction mechanisms.   Metal samples were  briefly exposed to
 dry or moist acid vapors during the introductory  period and
 subsequently kept for  a longer time in an acid-free  atmosphere of
 differing moisture  levels.    Results showed that  the  metal  surface
 Mas initially attacked in  by  the  formation cf a  dry  or humid
 saline crust which  liquefied  through atmospheric  water absorption
 and attacked the metal surface  by  deoxygenation.  Pronounced
 reactions were  observed on  iron and zinc  surfaces, but the other
 metals proved relatively corrosion resistant.   (Author abstract)

 13877                                                            120

 HcLeod,  H.  and  R.  R. Rogers


COSROSIOH OF BETALS BY AQUEOUS SOLUTIONS  OF THE  ATHOSPHERIC
POUDTANT SOLFOROTJS ACID.   T?lectrochem. Technol., 6(7  to  8):
 231-235, July to Auq.   1968.   7 refs.


The corrosion rate  of  a metal in  an acid  with a  normality
 between B/1 and H/10,000,  such as  H2S03,  HN03,  H2SOU,  or
 HCL, was found  to be related  to the concentration of the  acid
 in accordance with  the equation Corrosion rate  equals  a x  (Acid
 Hor-oality)   to the b power,  where  a and b  are  constant  for  each
 combination of  acid and metal and  where temperature  is 25  C.
 By determining  the  values  of  a  and b for  a number of acid-metal
                         Effects - Materials                            67

-------
combinations, it.  was possible  to conpare  the corrosion  rates
of  the various  metals in sulfurous acid with those of the
same  metals in  nitric, sulfuric, and hydrochloric acids,  and
to  determine the  corrosion  rate of the metals in sulfurous
acid  of different normalities.   Data obtained show that
nonstainless steel,  with or  without nickel,  is hiahly
susceptible to  sulfurous acid  corrosion.   However, when
a substantial proportion of  chromium is present in an alloy
which contains  nickpl, steel is free from corrosion by  either
sulfurous acid  or nitric acid,   copper and chromium are not
appreciably susceptible to  sulfurous acid corrosion in  solutions
lower than N/1.3.   Tin corrodes more rapidly than other
nonferrous metals between N/100 and N/1000,  but less than
cadmium and zinc  at.  N/10.   Cadmium, Lead,  and zinc corrode
more  rapidly in sulfurous acid than in nitric acid.  Lead
corrodes less ranidlv in sulfurous acid than in nitric  acid.
Aluminum is rapidly  corroded by hyperchloric acid but less
so  by nitric or sulfurous acid.   The study concludes that
sulfurous acid  solutions causing the greatest damage in urban
and industrial  areas have abnormalities between N/1 and
H/10,000.
06601

H. C.  Muffley


INFLDEBCT! OF ATBOSPflE^TC CONTABIBABTS OS CORROSION - LITERATURE
REPORT.  Rock Island  Arsenal,  111.   (Kept.  So.  63-20U1.)
23 pp.   (June  13,  1963).  ODC:   AD «20 118
    DT)CI  RD «2^  117
The influence of atmospheric contaminant gases and particulate matter upon

the corrosion rates of ferrous and nonferrous metals is investigated.

Various means of protection from, or elimination of, such corrosive environ-

ments are reviewed.  Variations in the rate of corrosion coincide with the

severity of atmospheric pollution in different locations where average

humidity is approximately the same.  Because of this interaction of the

various pollutants and moisture, and the fact that these vary independently,

it is difficult to predict the corrosion behavior of a location. It has been

observed that the corrosiveness of a given atmosphere is not constant, but

varies with the weather conditions.  Some areas will show a difference in

the corrosion of specimens put out at different seasons of the year.  Data

from the tests in both industrial and marine atmospheres, reveal that very

great differences in corrosivity can exist at locations only a few miles

apart, or, in some extreme cases, only a few 100 feet apart.  The corrosion

rates of various metals or alloys for various environmental conditions

are given.  Corrosion of metals can be overcome 1) by eliminating the '

contaminants that cause corrosion of metal parts, 2) by preventing the

contaminants from coming in contact with the metal surface, and 3) by using

a metal finish that will be resistant to the specific atmosphere.
68                 HYDROCHLORIC ACID AND AIR POLLUTION

-------
12055                                                            122

Sowak, F.


cnnEOSiON PROBLEMS IN TNCTNFBATOPS.  combustion, «0(5):32-40,
sov. 1968.


The state of the art of corrosion in incinerators is reviewed.
While at first glance there seems to be no great difference
between an incinerator whose generated heat is being used for
steam generation and a boiler fired with conventional fuel, in
fact many more problems are encountered due to the heavy deposits,
tore frequent outages, and gas-side corrosion of heating surfaces.
Due to the nonhomogeneous nature of the waste materials and the
corrosive components in the flue gas which are steadily increasing
with the increase in plastics and other industrial wastes fired,
control of conditions in incinerators is difficult.  Some examples
of corrosive experience and some approaches to control of the
problems are discussed.f#


06038                                                            123

P. H. Sherwood
HOH ATMOSPHERIC CONDITIONS CAN CORRODE BEFINEBY EQUIPMENT.
Erdoel Kohle (Hamburg) 19(«):289-290  (April 1966.)  Ger.
(Tr.)


Atmospheric corrosion of refinery equipment from the effects of
humidity, dusts and electrolytes is reviewed.  Effect of humidity:
Although water vapor contributes to the mechanism of atmospheric
corrosion, the principal offender is water which precipitates in
liquid"form from saturated or near-saturated air.  An
oxidation-reduction potential may be built up between two
surfaces which promotes corrosion.  Electrolytes dissolved in the
water will increase corrosive action.  Enclosed storage and
hunidity control are two approaches which can be used to counteract
some of these situations.  Effects of dust:  These are probably
not significant unless the dust consists of a salt or other kind
of electrolyte.  Effects of oxidants and electrolytes:  Oxidants
cause serious corrosion only in the presence of liquid water.
Acidic materials are seen to be the worst corrosive agents in the
atmosphere.  Salts are strong electrolytes and in the presence of
liquid water they will contribute to rusting of materials.
Alkalies are not considered a serious problem in atmospheric
corrosion; strong alkalies deposited in the presence of liquid
water can cause deterioration of aluminum or zinc.**
0277U                                                            124

V.B.  Volkening


PERFORMANCE OF COATING ON METAL IN AN IHD.DSlRIAt ATMOSPHERE.
Preprint.  (Presented at the 56th Annual Meeting, Air
Pollution Control Association, Detroit, Mich., June 9-13,
1963, Paper No. 63-86.)
                          Effects-Materials                          69

-------
The reason and methods of procedure for a protective coating
testing program are discussed.  Results based on fifteen years
operation of such a program in a chemical plant on the
Gulf Coast are described - some in detail.  Atmospheric
contaminants from high humidity and moisture
condensation to chlorine and hydrochloric acid were encountered.
A method for calibrating the atmosphere is outlined.
Differences in the performance of several generic types of
coating resins are presented.  Generous references to the
literature are included.   (Author abstract)**
 70               HYDROCHLORIC ACID AND AIR POLLUTION

-------
                     EFFECTS  - .ECONOMICS
217«9                                                           125

Heidensaul,  T.  Craig and Norman I.  laCasse


SialEBIDE SURVEY OF ilfi POIIDTICB CSHAGE TO  VEGETATION -  1969.
Pennsylvania state Onlv., University Park, Center  for Air
Environment  Studies, PHS Grant AP 00002. 1970,  52p.  3 refs.


Baring the summer of 1969, a statewide survey of air pollution
damage to vegetation was conducted  to assess economic losses
incurred on  food and fiber crops in Pennsylvania.   Host incidents
occurred in  areas of greatest agricultural activity.  The greatest
econonic losses were observed CD vegetable,  froit, and agronomic
crops, followed by lawns, ornamentals, greenhouse  flowers, and
forest trees.  The suspected major  pollutants,  based on associated
economic losses, appear to be as follows:  cxidants, sulfur oxides,
lead, hydrogen  chloride, participates, herbicides, and ethylene.
The total amount of direct economic loss was estimated to be  more
than 3.5 million dollars.  Indirect losses accounted for  an
additional 8 million dollars.  These losses  include known profit
losses to growers, costs of reforestation of denuded land, known
greater relocation costs, and substitution of lower value crops for
higher value ones.  Other indirect  effects are  stream silting,
erosion, farm abandonment, and loss in aesthetic values.
(Author abstract modified)

-------
                  LEGAL  AND ADMINISTRATIVE
00311
AIR POLLUTION (A SOPVEY OF EXISTING LEGISLATION).
Intern. Digest Health Legislation 1U, 187-229,
This report contains a comparative survey of existing
legislation for the control of atmospheric pollution, and
discusses specific laws and regulations of following countries:
Rustralia, Belgium, Canada, Chile, Czechoslovakia,  France,
Federal Republic of Germany, Ireland, Jamaica, New  Zealand,
Poland, England and the Inited States.**


17H72                                                           127

Duemraler,  Friedrich


ME SNTI-AIR POILUTICN ACTIVITIES OF THE TECHNISCHE
DIBEBHflCBUNGS-VEBEIN.   (Eie Technischen Ueberwachungs-Vereine in
Dienste des Iminissicnsschutzes) .   Text in German.   Tech.  Deberwach
(Duesseldorf ) ,  10 (10) : 339-345, Oct.  1970.


Cne of the most important tasks cf the Technische
Oeberwachungs-Verein (TUV)  is to  measure dust emissions by steam
plants.  By checking the perfciitance of new measuring units and
determining whether they fulfill  the manufacturer's specifications.
Measurements by the TDV taken in  1967 on steam boilers with
capacities of up to 25 t/h showed that plants without dust
collectors emitted en the average 560 mg dust/cu n; those with
dust collectors, 170 ug/cu a.  For plants with more than 100
Gcal/h, the authorities require the installation of autoiatic
measuring devices for dust and sulfur dioxide.  In  this
connection, TUV checks the available units for suitability and
calibrates each individual unit.   Per dust measurements,
photometric units were suitable;  for 502 measurements, infrared
absorbers and electroconductivity analyzers were selected.  In
addition to these activities, TDV is presently engaged with
fluorine,  hydrocarbon, hydrogen sulfide, sulfur trioxide, carbon
monoxide,  hydrogen chloride, lead, and zinc oxide measure Bents.
In the years 1965-1966, TDV conducted extensive studies of CO
and CN content  of automobile exhausts in the idling stage.
Infrared absorbers were used for the measurements.   Ten percent
of the vehicles with four-stroke engines emitted more than B% CO
in the idle; but 
-------
17188                                                           IJt

Hashimoto, Hicbio


STATUS OF AIR POIIUTIOS BY NOXTODS SHC OFFENSIVE GASES AND THEIR
CONTROL PROGRAMMES.   (Yugai gasu to niyoru osen no genjo to sono
taisaku ni tsuite).  Text in Japanese.  Kogai to Taisaku  (J.
Pollution Control), 2(7):441-411, Aug. 15, 1966.


A procedure for the adequate control of noxious gases, seme of
which are not yet covered by legislation, is discussed.  Though
dust fall is decreasing as a consequence of regulatory control,
noxious and offensive gases are increasing in nany industrial
areas.  The labor Standard taw of 1947 provides for the control of
(forking environments in the interest of worker health, cut is no
longer consistent with the present state of industrial pollution
which poses a hazard for persons living in the vicinity of plants.
The 1948 law regulating agricultural chemicals is concerned only
with preventing injuries tc people and livestock caused by the
unrestricted use of chemicals; it does not consider the
contribution of the chemicals tc air pollution.  High pressure
gas control, fire prevention, lining, and other laws are subject
to the same criticism.  Bhat is characteristic of these control
laws is that they do not specify total noxious gas emission nor
the relationship between a gas and its effect.  The Smoke Oust
Control Law is intended to coipensate for these shortconings; it
now deals with sulfurous gas, anhydrous sulforic gas with hydrogen
fluoride, hydrogen sulfide, selenium oxide, hydrogen chloride,
nitrogen dioxide, sulfur dioxide, hydrogen cyanide, carbon
disulfide, ammonia, phosgene, and silicon tetrafluoride.  Hore
offensive gases are to be covered by the law.

07597                                                           129

Heller, A.


HAXIHOH PERMISSIBLE COKCBNTRATTONS FOR AIR POLIUTI08 IH THE
FEDERAL REPUBLIC OF GEBHANT.    Preprint, Federal Inst. of
Hygiene for Water, Soil and Air, Berlin, Germany, 10p.,  1963.
(Presented at the Inter-Regional Synposiua on Criteria for
Air Quality and Methods of Measurement, Geneva, Switzerland,
Aug. 6-12, 1963, Paper No.  WHO/AP/8.)


An advisory committee set up by the Federal Government gives
expert advice on the proposals of the Clean Air Commission of
the Association of German Engineers regarding permissible
emissions as well as on the maximum concentrations of "innissions"
- the HIK values - for various air pollutants.  The task of the
Verein Deutscher Ingenieure Commission is to set scientific
and technical bases for appropriate air pollution control measures.
The nain task of the Connission is to draft recommendations for
new technical regulations as a basis for the determination and
control of air pollution, as follows:  Minimum requirements
regarding the concentration and precipitation of dusts and gases
in the atmosphere, bases for calculating the distributionat/dusts
and gases and for determining the required height of chimneys,
limits to the emission of dust and gas fioa sources of air
pollution, and procedures for measuring dusts and gases.  The
provisions recommended for examining applications for licences to
74                HYDROCHLORIC ACID AND AIR POLLUTION

-------
establish new plants or to alter existing plants are reviewed.
Enforcement of these regulations vill depend on the local
situation, especially the existing pollution load.   They Bill also
depend on the extent to which further pollution could occur,
without exceeding the tolerance limit or the HlK-value for the
most sensitive among the reaction partners, whether human being,
animal or plant, and on the technical processes of  the industrial
plant in question.   In principle, all reasonable technical and
economic possibilites for purifying waste gases should be
exploited in equal fashin by similar industrial plants.   Finally,
industry should be prepared to bear more far-reaching demands
regarding waste-gas removal, if a licence for a new industrial
plant or for the extension of an existing plant is  to be issued in
an area already polluted.  MIK-values have been set and  are
discussed for;.sulfur dioxide, hydrogen sulfide, some nitrous gases
and chlorine.**

09687                                                            13°

p. Button


AIR POLLUTION IB PETROLEUM EEFIRISG.   Chem. Process Eng.,
19(1):36-38, Jan. 1968.  9 refs.


The statute law relatint to air  pollution  is wide in coverage but
not too onerous in its requirements.  The author discusses common
law as it affects the pollution  of air, and considers in detail  the
tso statutes applicable  in petroleum refining-the Alkali and  the
Clean Sir Acts.**
09285                                                            131

H. Wolozin


FEDERAL FISCAI POLICY IN AIH  POLLUTION CONTROL.    (PREPARED
DISCUSSION.)  Preprint,  Massachusetts Univ., Boston, Dept.
of Economics, 4p.,  1966   (Presented at the  National
Conference on Air Pollution,  Washington, D. C.,  Dec.  12-14,
1966.)


Inportant questions to consider  in determining  policies on
air pollution are how much is presently known about
polluted air, how extensive are  damages and whether the damages  are
progressive and irreversible.  Policy recommendations would be
different if time were not of the essence  and  damages were
remediable.  Measurement techniques are confined to direct
effects of high levels of contamination.   It is recommended that
priority be given to research on measuring indirect and insidious
effects of low level exposures of long duration.  The air
pollution problem poses  the need for serious considerations
of alternatives to influence  management decisions.  Research
is required to determine if effective control  will  not
ultimately demand basic  modification of traditional
government-industry relations.   It is recommended that  air
pollution authorities be given the authority and resources
to pay for air pollution filtering and control devices  or
bear the cost 'of modifying existing equipment.   In  return
authorities would receive the right through public  commissions  to
participate in corporate decisions affecting emission of
pollutants.**
                        Legal and Administrative                         75

-------
                    STANDARDS AND CRITERIA
 00*11                                                            132

 K.  Horn


 (THE PROBLEM  OF  HYGIENICAL!?  PERMISSIBLE LIMITING CONCENTRATIONS
 05  &IB POLLUTION.)    Zur  Praqe  der  Hygienisch  zulassigen
 Grenzkonzentrationen  fur  Luftverunreinigungen.   Angew.
 Beteorol.   (Berlin) 5 (Special  Issue)  :39-U3,  1965.  Text in
 Ger.
The  problem of determining  permissible limits of air pollution is
discussed.  After  listing four categories of pollution ranging
fron decreased visibility and injury to sight and smell to acute
illness and possibly death, the  aurthor states that pollution
should be kept below the limits  of the first category.  He
distinguishes between limits permissible in a factory area
and  in a residential area,  the first being higher.  Permissible
liaits for i»0 chemicals established in 1963 for single
occurrences and average 2H  hour  concentrations for Past
Germany are tabulated.
-------
(Gardenvale), 69 (4);60-66, Feb. 16, 1968.  11 refs.  (Presented
at the 3rd Paper Industry Air Stream Improvement Conference,
Vancouver, B.C., Oct. 23-26, 1967.)


Major sources of air pollutants are discussed, as well as the need
for control of emissions using source emission standards and
ambient air quality criteria.  Criteria for air quality reflect
the nature and magnitude cf effects of air pollutants upon the
atmospheric environment in general and on visibility, safety,
health of man or animals, vegetation and property.  These criteria
state four levels of pollutant concentration and exposure periods
according to the differing effects on the exposed population or
receptors, rangin from no direct or indirect influence to symptoms
that may be merely adverse, or serious, or of emergency
proportions.   Ambient air guality guides and standards adopted
by several countries are tabulated for C02, CL2, ethylene,
BC1, H2S, oxides of nitrogen, ozone or oxidant, CS2, and
S02.  Those of the State of California, State of Sen
York, Nest Germany, Czechoslovakia, U.S.A., and the U.S.
S.R., are reviewed.  Air guality standards established in the
O.S.S.P. are more stringent than those formulated in West
Germany, the U.S.A.  (California), and elsewhere.  Maximum
allowable concentrations for sone atmospheric pollutants
(industrial)  in the U.S.S.D. are also tabulated, including As,
Cr03, Fb, Mn, and soot.  A brief summary is given of Canadian
activities and the salient features of the Ontario Air Pollution
Control Act.   The existence of these standards implies that
stricter measures will be enforced to control emission sources in
the future.*f
07197                                                           135
RECOMMENDATIONS FOR ALLOWABLE CONCENTRATION  (1966.)  Kuki Seijo
(Clean Air - J. Japan Air Cleaning Assoc., Tokyo)
fl (<») :62-66, 1966.  Text in Japanese.


A report is given by a committee of the Japanese Association of
Industrial Health on "Allowable concentration".  The values of
allowable concentration are worked out for a healthy man working
8 hr per day doing moderate work.  Proper consideration oust be
given to cases in which more than 8 hr of exposure take place, more
than one pollutant is involved, or the concentration of pollutants
increases suddenly during the work schedule. -Included is a
discussion on dust measurement.  Tt is important to measure dusts
having a Stokes radius of less than 5 microns, especially at a
height of 1 to 1.5 m from the ground.  The relation between the
source of dust and the point of measurement is illustrated.*f

01916                                                            V*

V. A. Rjazanov.


CRITERIA AND METHODS TOR  ESTABLISHING  HAXIHOH  PERMISSIBLE
CONCENTRATORS OF AIR POLLUTION.   Bull.  Horld Health Organ.
 (Geneva) 32, 389-98, 1965.


Experience in  the USSR in establishing standards for air
pollution control is described.   It is emphasised  that health
 78                HYDROCHLORIC ACID AND AIR POLLUTION

-------
considerations must be main criterion in deciding permissible
concentrations,  which constitute the "hygienic" standards
ultimately to be achieved.  Economic and technological reasons »ay
dictate temporary "sanitary" standards, which modify the
requirements for a limited period.  "Technological" standards
relate to the economic and technological consequences of air
pollution and do not concern health.  The maximum permissible
concentrations of toxic substances used in toxicology and
industrial hygiene are not sufficiently stringent for general use,
and control standards are therefore based on the results of tests
carried out on animals and human subjects.  Tests on animals show
that certain concentrations of toxic substances cause functional
changes (e.g., in higher nervous activity, cholinesterase
activity,  and excretion of coproporphyrin) as well as a nnnber of
protective adaptational reactions.  The results are used to
establish maximum permissible concentrations of pollutants within
a 24-hour period.  Tests on human volunteers provide a basis for
determining the maximum average concentrations at a given tine.
Beactions to odorous substances give the olfactory threshold and
the level of concentration causing respiratory and visual
reflexes, as well as subsensory effects such as changes in light
sensitivity and in the activity of the cerebral cortex.
Morbidity statistics also provide evidence of harmful pollution,
but cannot serve as a basis for establishing maximum permissible
concentrations, which should aim not only at preventing illness
but also at avoiding pathological and adaptational reactions.
(Author abstract)f*
05940                                                            137

V. A. Byazanov


HEH DATA ON LIMITS OF ULLOHABLF ATHOSPHEBIC AIK POLLUTANTS.
(In:  limits of allowable concentrations of atmospheric
pollutants.  Book 6.)  o.S.s.B. literature on Air Pollution
and Related Occupational Diseases, Vol. 9.  pp. 1-8.   (1962).
Buss.  (Tr.)


This volume contains material discussed by the Committee on
Sanitary Air Protection during its 1959 and 1960 sessions.
The material contained in this volume is of heterogenous
character in its methodological presentations and completeness and
finality of the reports.  The Committee took the position that
the level of methodology reached during the.last period of
investigation and the degree of reliability of results obtained did
not represent the acme of perfection, and therefore, the proposed
limits of allowable concentrations should be regarded as mere
points of orientation for future studies, leading to more basic,
more scientific and hence, more reliable limits of atmospheric air
pollutants.  Tn this connection it is the aim and purpose of this
Committee to act as the stimulator, guide and directing agent
leading into investigational channels based on the outlined
principles.  Air pollutants studied include formaldehyde, HC1
aerosol, CS2 vapor, fin, Hg, combined C12 and HCl gas,
acetone, CO and Dinyl (mixture of diphenyl and diphenyl oxide).*
21078                                                            138

Styazhkin, V. «.


EXPERIMENTAL BASIS FOE THE DE1EBKINATIOS  OF AILOSAELE
CONCEHTBATIOHS OS CHLOHIHE AND HCL GAS  SIHOLTANEOuSLY  PHESES1  IS
                        Standards and Criteria                           79

-------
ATMOSPHERIC SIR.  O.S.S.R. literature on iir Pollution and Belated
Occupational Diseases, vol. 8:158-161, 1963.   (B. S. Levine, ed,)
   CFSTI:  63-11570


An experimental basis fox the determination of allowable
concentrations for simultaneously present chlorine and RC1 gas in
the ambient air was obtained.  Studies were conducted in the
vicinity of a magnesium plant at 300, 500, 800, 1000, 2000, and
3000 m from the plant.  air samples Here collected by the
aspiration method through an absorber equipped with a porous
plate No. 1.  One absorber Has filled with double distilled water;
the other was filled with an acidified solution of methyl orange.
Air samples collected through double distilled water were used
for the determination of HCl aerosol by the titration method.
Sulfuric acid, which interferred with analysis, was determined
nephelometrically and subtracted frcm the titration result.
Chlorine was determined colorimetrically in the sample.  Results
showed that chlorine and HC1 gas concentrations were considerably
in excess of the allowable maximal single concentration limit
at all collecting pcints.  The threshold of Cl odor preception
was 0.7 mg/cu m and of HC1 gas, 0.2 mg/cu m.  Threshold odor
perceptions of Cl and HC1 gas simultaneously present in the air
were established in the following combinations:  0.3 mg/cu o Cl,
0.1 mg/cu m and 0.2 mg/cu n> Cl, 0.13 mg/cu o HC1.  Results of
the tests by the optical chrcnaxy method established the
threshold of reflex effect of Cl and HC1 gas simultaneously
present in the air in the follcwing concentration:  0.3 mg/cu m
Cl, 0.2 mg/cu m HCl and 0.2 mg/cu m Cl, 0.3 mg/cu m HC1.  The
limit of maximal single concentration for Cl was 0.1 mg/cu a and
for HCl, 0.05 mg/cu m.  The simultaneous presence of Cl and HCl
gas in the air in corresponding concentrations had no effect on
the control curve of dark adaptation.  Results showed that the
concentrations were below the threshold of odor perception and
reflex effect and below the allowable concentration limit.
80                HYDROCHLORIC ACID AND AIR POLLUTION

-------
                BASIC SCIENCE AND  TECHNOLOGY
 13199                                                           139

 Baqliano, G, and L. Ossicini


• IBB ADSOHPTION OF KETAL IONS FBOM HF-HC104 MIXTURES OS SCBE IOH
 EXCHANGE PAPEBS.  J. Chccmatog. , 21 (3) : 499-502, March 1966.  2 refs.


 A comparison of ion exchange frcm HF-HC1 ana HP-HC104 mixtures for
 ions known to adsorb from  these solutions is made using two types
 of anion and one cation exchange paper.  The concentration of
 HC1 or  HC104 was maintained constant at 1N and the HP concentration
 was varied from 1 to 103.  Experimental results show that, while
 there are considerable differences  in adsorption fron HF-BC1, very
 few ions were adsorbed free HF-HC104.  Tantalum Day be adsorbed
 from mixtures with  Hf, Zr, Ti, Nb,  Ho, H, and U on an anion exchange
 resin paper froi HF-HC104.
 16169                                                           140

 Baume,  Georges


 FREEZING POINT OF GJSEOUS  MIXTURES  AT VERY IOH TEHPEBATUBES,
 (Sur le point de congelation des melanges gazeux a de tres tasses
 temperatures).  Text in French.  Conpt. Rend. 118:1322-24, 1909.
 6 refs.


 The gas mixtures studied were  (CB3)20-HC1,  (CH3) 20-S02 and
 (CH3) 20-CH3C1.  The freezing point  curve of the first and 2
 maxima, one at -94 C, the  other at  -102, corresponding to a
 mixture of one ether and 4 HC1.  solid ether * S02 was obtained;
 temperatures were not given.

 17716                                                           Ml

 BauBie,  Georges and  Georges -P. Panfil


 QUANTITATIVE  INVESTIGATIONS OF VOLAJI1E SYSTEMS:   FUSIBILITY
 CDBVES  OF SYSTEHS FORMED BY HYDROCHLORIC ACID AMD  SULFDR  DIOXIDE
 HITH HETHYLAICOHOI;  MECHAHISH  OB TH£  FORMATION  OB  ESTEBS.
 (Becherches  guantitatives  sur  les  systenes  volatils:  Courbes
 de fusibilite des systemes formes  par 1'acide chlorhydrigue
 et 1'anhydride sulfureux avec  1'alcool  methylique;  mechanisne  de
 la formation  desesters).   Text in  French.   J. Chin.  Phys.,  vol.
 12:256-265,  1914.   25  refs.


 The solidification  of  the  following binary  systems were  determined:
 CB30H-HC1; C2H5.CO2H-CH30B,  (C2H5C02H.HC1) -CH30H;  (CH30H.HC1)-
 C2H5C02H; CH30H-S02; and S02-BC1.   The objective  of  these
 determinations mas  to  obtain new confirmations  on  the  nechanisa
                                ei

-------
of chemical reactions.  The existence of the following, but
unstable, intermediate addition compounds was .established:
a) CH30B«HC1; b) CH30H+C2H5C02H«-HC1; c) CH30H+S02; and d)
2CH30H+S02.  compounds  a  and  fc   may be considered as the first
stages of formation of the halcgen  derivatives of alcohols and
esters.  Moreover, ccrapcund  b  cffers a particularly simple
example of chemical catalysis ty inorganic acids.  In contrast
with  'physical catalysts' which raise artificially and locally
the temperature or pressure and thus create a state of affairs
which an overall rise of temperature or pressure would produce
without their intervention, "chemical catalysts' fora addition
compounds with the substances whose mutual reaction they
fercilitate or provoke.  Ccrcpcurds  c  and  d  solidifying
respectively at about -71 C and about -81 C form a part of a
system with a simple  'oxcnian' phase diagram, in which they
alternate with eutectic points at about -88 C at US mole  % CH30B,
at about -91.5 C at 62 mole % CH30H and at about -106 C at
89 mole % CR30H.  The S02-HC1 system has a simple eutectic point
at -133.5 C at 80 mole % S02.

05000                                                            142

E. E. Berkau,  G.  T. Fisher,  and H. H. Jones


THE INFLUENCE OF AXIAL DISPERSION OS THE FIXED BED ADSORPTION OF
THE HYDROGEN CHLORIDE-CHROMIUM OXINATE SYSTEH.   Preprint.
1964.  63 pp.


The results from a study of the removal of gaseous hydrogen
chloride by the solid, metal organic complex, chromium oxinate,
in a fixed-bed adsorption column is presented in the form of
adsorption curves or exit qas concentration histories.  These
experimental curves are subsequently compared to the solutions
of a theoretical mathematical model representing the
adsorption process.   The model incorporates axial diffusion, as
described by G.  I. Taylor.   A gas phase mass transfer
resistance and a solid phase adsorption-desorption rate were
considered as the mechanisms for the adsorption model.  The
solutions to the mathematical model were generated by an analog
computer.  (Author abstract)*f

17126                                                            143

Braunstein, J. and H. Blander


TBE THERMODYNAMICS CF DILOTF. SOLUTIONS OF AGS03 AND KCL IN MOLTEN
KSC3 FFOH ELECTROMOTIVE FOECE HEASDBEHBS1S.  III.  TEHPERATDBE
VARIATIONS OF THE ACTIVITY CCEBJ1CI1KTS.  J. Phys. Chem.,
61(10):10-13, Jan. 1960.  4 refs.


Activity coefficients and their teraterature dependence as
calculated from the guasi-lattice model of the molten reciprocal
salt system A{+),  B(+), C(-), and D (-), were tested by comparison
with measured values of the activity coefficients of the component
AgN03 in the system Ag(+), K(+), Cl(-), S03 (-) dilute in *g(+) and
Cl(-) ions.  Electromotive force measurements in a molten salt
concentration cell were nade at 385, 402, and 123 deg.  KCl in
solution lowered the activity coefficient of AgN03; the decrease
was directly proportional to the concentration of Cl(-) ions and
82                HYDROCHLORIC ACID AND AIR POLLUTION

-------
 inversely proportional to the concentration of Ag(+)  ions.  Besults
 show that the temperature coefficients of the activity
 coefficients in the range of validity of the theory are correctly
 predicted, lending confidence in the usefulness cf the guasi-
 lattice model.   (Author abstract modified)

2C189                                                            144

Brockneier, Borttai;  F.


CHE«ICAI  REACTIONS  INDUCED IK A  MICECWAVE DISCHARGE.
Massachusetts Inst. cf Tech., Cambridge, Dept. of Chemical
Engineering, Thesis  (Ph.D),  13£p., Aug.  1966.  60 refs.


A suitable chemical system was determined for  microwave discharge
and the relationship was  fcund between the  icicrowave power and
the chemical parameter.   The chemical systems  investigated
included  the reactions of hydrogen chloride  with solid carbon
or with hydrocarbon gases  (methane,  ethylene,  or acetylene) and
the oxidation of sulfur dioxide.  The discharges were induced
in a tubular quartz flew  reactor, with energy  supplied by  a
microwave  power generator at fixed 2U50  me  frequency with  a
continuous wave magnetron capable of 1200 watts output.  The
hydrogen  chloride  system  did net achieve a  reasonable conversion.
However,  60? of the sulfur dioxide feed  was  oxidized with  air at
300 C without using a catalyst.  The conversion of  the  sulfur
dioxide-oxygen  feed was prcpcrticnal to  the  concentration  of
various third gases, such as sulfur  hexafluoride, carbon
tetrafluoride,  or  nitrogen added to  feed.   Ihe hypothesis  that
the termolecular collision 0 + S02 + B yields  503 + B •was  the
rate-controlling step in  the formation of sulfur trioxide  was
supported  by experimental data.  An  energy  balance  of the
reactor showed  that the adsorbed microwave  power was 50 times
the  power  required  to dissociate the oxygen  consumed.   These
results applied over the  entire  range of conditions studied:
pressure,  5 to  160  torr;  power,  50 to 480 watts; and feed
rate, frcm 90 to 300 cc/irin  measured at  one  atm and 21  C,  The
effectiveness of the third gas was directly  proportional to its
heat capacity and  inversely  related  to the  ease with which the
third gas  was excited by  the discharge.  (Author abstract
modified)

C9057                                                           145

Carter, C. Neal


EFFECTS OF pH AND OXIDIZING AGEKTS CN THE BATE OF AESORPTIOU OF
flXBROGEH SDIFIDE IKIO AQOEOUS HECIA.   TAPPI,  50(7):329-334,
Only 1967.  19 refs.


The rates of absorption cf hydrogen  sulfide  into aqueous
solutions of hydrogen chloride, scdiun hydroxide, and sodium
hypochlorite were measured by means  of a laminar liquid jet.
The effects of various reactions were deteroined by analyzing the
data in terms of the penetration theory.  The  various reactions
that were found to influence the rates of absorption determined
in this study were an ionizaticn reaction, which had a first order
forward rate constant of 8.1 per sec; a  neutralization reaction
between hydroxide ions and hydrogen  sulfide  molecules, which had
                     Basic Science and Technology                        33

-------
 an  "infinitely  high"  rate;  and  an oxidizing  reaction,  which  had  an
 "apparent"  first-order  rate constant of  250  per sec  for  a  0.1N
 hypochlorite  solution.   The data on  the  absorption of  hydrogen
 sulfide  into  basic  solutions indicate the possibility  that the
 laminar  jet and wetted-wall column do not give  comparable  results
 for cases of  absorption accompanied  by an "infinitely  fast"
 rea'ction.   Further  analysis of  the rates of  absorption into
 oxidizing solutions indicates that hydrogen  sulfide  will react
 initially with  the  hypochlorite ions to  fora dihydrogen  sulfoxide,
 which  in turn sill  form unstable complexes tiith more hydrogen
 sulfide  molecules by  sulfur-sulfur bonds,  fhe  data  also indicate
 that for oxidizing  solutions above pfl 12, the rates  of absorption
 are influenced  by the decomposition  of dihydrogen sulfoxide, which
 gives  hydroxide ions  as a product.  (Author's abstract)*#

 11108                                                            146
 Coleman, Paul D. and  Bobcrto  Roldan


 ELECTRICS!,  PROPERTIES OF  MATERIALS IN  THE FAB INFBABED REGION.
 (FINAL BEPOBT 1  FEBBUABY  1965 - 31 JANUARY 1967.)  I1LISOIS  OHIV.
 Drbana,  Electro-physics lab., Contract AF-AEOSR-272-65,  Proj.
 9767-02  AFOSR-68-0465,  8p.,  (22)  refs.
    CFSTI: AC  669573
A vacuum nonochromator  for  the  80  to  1009 .nicron range,  under
construction for the  past year,  is described.  Initial data on  the
rotational spectra HC1,  8Br,  H205S  CH3C1  and  CH3CN  were taken
to test the performance  characteristics  of the instrument, perfor-
mance data indicated  that the  tconochrcnator  characteristics are
wavelength- reproduction  0.1%;  wavelength calibration 0.5%; relative
intensity measurement 5  to  104;  and a  resolution of 2% in the 300
to 700 micron range using a carbcn bolometer detecter and a scan
tine of 1 hour.   (Authors'  summary, modified)

2027U                                                            147

Collins, Conrad G., Jr.


A REVIEW OF SULPHUR FLAME TECHNC1CGY.  (PAST  2).  Sulphur Inst.
0., 6(1):18-22, Spring 1970.  52 refs.   Part I.  Ibid, Winter
1969-70.


The encounter and reaction cf sulfur dioxide w-ith an oxygen
atom appears to be the predominant  mechanism for sulfur
trioxide formation according tc  most studies of stack gases and
the hydrogen sulfide  flame.  The mechanism can be important only
in flanes with high temperature  (1200 C) zones for the formation
of atomic oxygen, as  at  lower temperatures,  the slow homogeneous
reaction between S02  and molecular  oxygen appears to be a two
body collision reaction.  Catalytic action of nitric oxide for
oxidizing S02 to S03  is  guesticned  in lower  temperature regions
vhere SO2 would react only with  molecular oxygen, but if high
temperatures prevail, such that  the oxygen atom concentration is
appreciable, the catalytic effect  of NO  may  be established.'   '
Experimental work with hydrogen  chloride added to the flame   '
(nucleophilic partner) yielded 389  S03,  and  HC1 was viewed as a
stabilizing medium for S03.  Different sulfur oxide species have
been detected spectroscopically  at  a variety of conditions, from
low temperature to the high temperature  of shock waves.
84                HYDROCHLORIC ACID AND AIR POLLUTION

-------
14305                                                            j4*

Conway, B. E., J. O'R. Bockris, and Redda Linton


PROTON COSDDCTANCS AND THE EXISTENCE OF THE H30 (I) ION.  J. Chen.
Phys., 24(4):83tt-850, April 1956.  44 refs.


The conductance of HC1 in nonagueous and in aqneous-nonagueous
systems was studied and theoretical predictions were compared
with experimental results.  Five processes which could be rate
determining in proton conductance in hydroxylic solvents were
considered.  Proton transfer between HBO(I) and H20 by gnantun-
mechanical tunneling  is faster tnan corresponds to the
experimental anomalous conductance and faster than the laxiaon
possible rate by classical proton transfers.  Both transfer
processes give too high a value of the H(I)/D{I) mobility ratio.
Rotation of H30 (I) ions is not advantageous for proton transfers
and reorientation of  H20 molecules is always necessary for
successive proton transfers,  slow libration of H20 and H3O(I)
molecules, followed by proton transfer was considered, but this
process gives the wrong direction of change of nobility fron
H (I) in H20 to D(I) in D2O, and also leads to a conductance faster
than that corresponding to water rotation.  Reorientation of H20
molecules in the field of the H30 (I) ion was shown to be rate
determining and the theory is supported  by .results of critical
experiments on proton conductance in a series of alcohols and
their mixtures with water.   (Author conclusions modified)

21929                                                            149

Cruickshank, F. R. and S. H. Eenson


SOME THERHOCHENICA1 PROPERTIES OF HETHY.L VINYI ETHEH,
ALPHA-CHIOROETHYL HETHJTL ETHEB, AND IODOHEHII METHT.L ETHEB.
EVIDENCE FOR NONBONDED ELECTROSTATIC INTERACTIONS.  J. Am. Soc.,
91(10):2487-2492, Bay 7, 1969.  20 refs.


The entropies ot methyl vinyl ether and alpha-chloroethyl nethyl
ether were calculated, respectively, by statistical mechanical
methods, and from the measured equilibrium constant.  In the
latter measurement, hydrogen chloride pressures were varied from
104.5 to 227.8 torr, and methyl vinyl ether from 28.57 to 213
torr.  The heat of formation of iodonethyl nethyl ether was
calculated from the equilibria! constant and an Assigned value for
the entropy of the iodcmethyl ether.  Iodine pressures were varied
3.76 to 18.85 torr and dimethyl ether pressures from 39.62 to
592 torr.  The temperature range was 515-631 K.  Values obtained
are consistent with an electrostatic interaction of the halogens
with the terminal methyl group arising from the alternate
polarity of bond dipoles.  (Author abstract modified)

17888                                                            ISO

Cupr, Vaclav


ABSORPTION Of HYDROGEN CHLORIDE GAS ANC SULFUfi  DIOXIDE IN
SULFOBIC ACID AND ACETIC ACID.   (Deber die Absorption von
Chlorwasserstoffgas und Schwefeldioxyd in Schwefelsaeure and
                     Basic Science and Technology                        85

-------
Essigsaeure).  lext in German.  Bee. Trav. Chin., vol.47:55-72,
1928.  33 refs.
The absorption isotherms in aqueous solutions of sulfuric acid at
25 C and sulfur dioxide at 20 C, have a minimum at 89 and 86?
H2S04, respectively, both of which lie close to the composition of
the H2S04.H2O monohydrate cf sulfuric acid.  To verify that the
above minimus are due to the formation of the above monohydrate,
extensive determinations of absorption isotherms of HC1 and
S02 in aqueous solutions cf H2SG4 and CH3COOH were performed, as
well as in pure H20.  The apparatus and the procedures used are
described.  The amounts of HC1, or S02, absorbed sere determined
by argentometric as well as iodcmetric titration, and are given in
terms of grains of HC1, cr S02, per 100 grams of the H2S04 or
CH3COOH, aqueous solution.  The absorption isotherms of BC1 gas
«ere determined in aqueous H2S04 at C, -15.8 and -25 C in
concentrations at which at the abcve temperatures the hydrates
H2SO4.2H20 and H2S04.4H20 do not precipitate; in agueous H2S04
with between 62 and 98% H2SOU at 40 and 68 C; in 96* H2S04 at six
temperatures tetween 0 and 75 C; in agueous CH3COOH at 0 and 25 C;
and in pure R20 at C and 25 C.  The absorption isotherms of
S02 were determined in agueous CB3CCCH at 27 C; in agueous H2S04
at 41 and 62 C; and in pure H20 at 27, 41 and 62 C.  The present
results agree with those given in literature.  The relationship
between lowering the absorption capacity of the absorbent solution
and the formation of the H2S04 ncnohydrate is pointed out.
10672                                                            1S1

Hersch, Paul B.


CONTROLLED ADDITION OF EXPERIMENTAL POLLUTANTS TO AIR.  Gould-
National Batteries, Inc., Minneapolis, Minn., 24p., 1968.  21 refs.
(Presented at the 61st Annual Besting of the'Air Pollution
Control Association, St. Paul,Minn., June 1968, Paper 68-
153.)


Experience with, and'extensions of less known techniques of
providing an air stream with a steady and adjustable level of a
gaseous impurity are described.  Leaving aside those means that
employ moving solid parts, the paper discusses devices using liquid
pistons, mikro-flow through channels, diffusion across channels and
barriers, stream splitters for attenuation, and methods based on
evaporation, electrolysis, chemical conversion, and irradiation.
(Author s abstract, modified)
 16071                                                            152

 Bexter, H. fl. and T. D. Goldfarb


 INFRA-BEE SPECTRA OF QUINOI CIATHBATE COHPOUSES.  J. Inorg.
 Hucl. Chem., vol. 4:171-178,  1957.   21 refs.   (Presented at the
 Symposium on Molecular  Structure and Spectroscopy, Ohio State
 Dniv., Columbus, June 1956.)
                  HYDROCHLORIC ACID AND AIR POLLUTION

-------
Inclusion complexes of Beta-hydroguinone clathrates with hydrogen
chloride, hydrogen sulfide, carbon dioxide, and sulfur dioxide
molecules were prepared tc study restricted and translational
modes of the molecules without resorting to lew temperatures.
Absorption and differential spectra from 1:1-15 micron were
obtained by suspending samples in KEr pellets.  The obtained
spectra, which were investigated with spectrophotometers equipped
with NaCl or KBE optics, are in agreement with a proposed
difference in crystal structure between alpha-hydroguinone and its
Beta alloraorph.  Spectra of HC1 and H2S clathrates indicate that
the guest molecules, while present in insufficiently snail
quantities for detection, profoundly change the guincl crystal
structure.  Examination of the 7CC, 800, and  1200 reciprocal cm
regions of the S02 clathrate spectrum demonstrate that the
clathrate's crystal structure is that of Beta-hydroguinone.  The
most significant results were obtained with the C02 clathrate; they
suggest that this clathrate has the crystal structure- of an
alpha-hydroquinone, or a structure intermediate between the alpha
and Beta forms, or that some alpha-hydroguinone is present as
another phase.  The observed maxima cf the CO2 spectrum band are
interpreted as wall-collison-broadened .rotational lines of the
Q branch of the parallel band of the captured C02 molecule.  The
absence of P and R branches suggest that the  rotation of the CO2
molecule in its hydroguinone clathrate is not free.

14313                                                            153

lederer, E. 1.


VERIFYING ADSORPTION FORMULAS BY MEANS OF ADSORPTION HEASDREHENTS
HITH ACTIVATED CHARCOAL.  (Pruefung von Adsorptionsformeln an
Hand von Adsorptionsmessungen bei einer hochaktiven Kohle).
Text in German.  Kolloid-Z. (Stuttgart), 61(3) :323-328, 1932.
15 refs.
Data reported by Remy on the adsorption of gases and vapors on
activated charcoal were used tc verify isothermal and isobaric
adsorption laws.  In the isothermal case, no decision can be made
between a logarithmic law and the formula of Langauir.  In the
isobaric case, a logarithmic law seems to fit the results best.
The isosteric curve of Trouton and Poole and the relationship of
Gurwitsch fit the data only moderately well.  The relationship
between the vapor pressure and the adsorbed volume of various
gases indicates that equal amounts of different gases are
adsorbed, referred to corresponding states.  Gas nixtures are
adsorbed proportionally, provided the concentrations are modified
by the influence of the mean molecular velocities and the shape
of the molecules.  The adsorption data for the following gases
were used:  C02, H2O, HC1, H2S, KH3, C12, CH3C1, S02, CH4, and
COC12.
14132

littlewood, F. and E. J. Argent


THE EFFECT OF AQDEOOS CONTAHINAHTS ON THE BEDOX POTENTIAL  OF
CHLORIDE BELTS.  Electrochim. Acta,  vol. 4:114-128,  1961.   8  refs.
                      Basic Science and Technology                        87

-------
The redox potential of a chloride melt contaminated with water is
determined by the activities of its hydrolysis and dissociation
products i.e., hydrogen ions, oxide ions, hydrogen, and oxygen.
The effects of the changes in these products were studied by
changing the partial pressures of HC1, H2, or 02 above the melt
or by adding Ka20 to the melt.  Experiments were carried out in
eguimolar NaCl-KCl at 700 C.  Variations in 02 partial pressure
did not change the activity of the oxide ions.  Stable redox
potentials could not be obtained under low pressures of hydrogen.
This suggested that under low pressures of hydrogen, the hydrogen-
ion activity was continually rising.  The effect of hydrogen-ion
concentration suggests that true equilibrium of the melt with the
gas phase was not obtained, and the measured potentials are a
kinetic compromise between the composition of the gas phase and
the equilibrium redox potential of the Belt.  The effect of
oxygen-ion concentration indicated that changes in redox
equilibria in the melt were occurring.  The study indicated
that attenpts to change activity of one component of the melt
by altering the composition of the gas phase or by Baking
additions to the raelt have brought about changes in the position
of equilibria in the melt.  Control of oxygen pressure would
therefore be a definite way of controlling redox potentials of
chloride melts, since the changes in redox potential could be
accurately forecast.  Hydrogen under low pressures corroded in the
same way that a metal attempts to approach thermodynamic
equilibrium in the melt by contaminating it with metal ions and
ultimately becoming immune.  The occurrence of this effect
meant that attempts to reduce redox potential of a melt by
varying hydrogen pressure would not be as good a control as
varying oxygen pressure.  The upper limit of the range of redox
potential over which platinum behaved as a redox electrode was
found to be - O.av on the standard chlorine electrode scale.

2C932                                                            15S

Bueller, Hobert F.


ENEBGETICS OF HCL AND HF IN VC1CBSIC EMANATIONS.  Preprint,
National aeronautics and Space Adninistration, Greenbelt, Hd.,
Goddard Space Flight Center, 32p., June 1969.  37 refs.
(Paper NASA-TB-X-63608.)
   CFSTI:  K69-32034


Thermocheaical data were used to calculate the fugacities of HC1
and HF in eguilibrium with halogen salts and crystalline
silicates.  The calculated fugacities were compared with the
abundances of HC1 and HF in fumarolic gases.  Good agreement
between the calculated values and the results of hydrothernal
experiments were obtained.  In the case of fumaicles, the
abundances of HCl and HF nolecules can be explained by assuming
some undersaturaticn of the systems in such crystalline components
as Bad, CaSi03, and A12Si05.  Also, the fumarolic gases gave
evidence that high temperature abundances of HCl and BF are
quenched to much lower teniferaturcs recorded at the fumarolic
vents.  Numerous determinations of Cl and F in igneous and  '
crystalline rocks showed that en the whole, F is more abundant
than Cl.  Igneous rocks and uiherals are quite distinct from
volcanic emanations in terms of the */Cl ratios.  The relations
between HCl and HF and the structure of the silicate melt were
also discussed.  Although heterogeneous equilibria may be
established at high temperatures tetween the the halogen gases and
88                HYDROCHLORIC ACID AND AIR POLLUTION

-------
 crystalline phases of the wall rock,  the ultimate source of nost
 of the halogens is the silicate Belt.   Although the structure of
 such melts is not well known,  it is reasonable that both the
 decrease in liquidus temperatures and viscosity are attributable
 to reactions in which the Si-O-Si bridges are destroyed by the
 reaction with water.  (Author  abstract modified)

 0903KL                                                           156

 F.  «.  Page


 A  STUDY  OF  THF  STABILITY  OF  GASEOUS NEGATIVE  IONS.
 (FINAL TECHNICAL  BEPOST.)   Aston Dniv.,  Birmingham,
 England,  Dept.  of Chemistry, Contract  DA-91-591-IDC-3870,
 Proj.  2001450B13B,  ((136))p.,  Feb.  1967.   15  refs.
    CFSTIt   AC 822511


 The modes of formation,  occurrence, and  in particular  the
 stability of gaseous negative  ions  was determined by the magnetron
 technique.   Included is  a description  of the  apparatus used, the
 elementary  theory of the  method, and  a comprehensive list  of the
 stabilities of  ions  studied  during  the past three years.*t

 15496                                                            157

 Prokop'yeva,  M. F. and v.  K. Bukina


 SELECTION AND TESTING OF  SOLID CAERIERS  IN THE CHBOHATOGBAPHY
 OF  CORROSIVE INORGANIC GASES.   (Podbor i ispytaniye  tverdykh
 nositeley v khromatografii agressivnykh  neorganicheskikh gazov).
 Text in  Russian.   Uzbeksk.  Khim.  Zh.,  no.  4:51-53,  1967.   i» refs.


 Studies  were made with pumice, quartz, zeolite, porous teflon,
 Estonian mineral  carriers K1 and K2,  diatooaceous brick and,
 kieselguhr.  The  brick,  kieselcjuhr, pumice, and quartz were
 subjected to boiling with hydrochloric acid (1:1)  for  6 hrs.
 After  washing to  remove  chloride ion,  they were heated for 2-3
 hrs at 900  C (pumice at  100  C).   The  other carriers  were not
 pretreated.   The  criterion for inertness of the carrier was the
 retention time  of the gaseous  component  relative to that of air.
 Distortion  of the absorption isotherm  was evaluated  in terms
 of  the Kestner  coefficient of  'asymmetry.  Pretreated brick,
 kieselguhr, and pumice revealed linear absorption isotherms for
 all coffiponents  (C02, C12, WOC1,  HC1,  S02)  with the  exception of
 H02, which  is irreversibly absorbed.   Teflon, ,'KT, and  K2 show
 linear absorption curves without preliminary  treatment and are
 recommended for the  analysis of gas mixtures  containing HO2.

 14106                                                            158

Ramirez-Hunoz, J., B.  Roth,  and  Naila  Ostring


HYDROCHLORIC  ACID SYSTEBS IN ATOMIC ABSORPTION FLAME PHOTOMETRY.
Flame Notes,  Beckman,  1(4):93-101,  1966.   6 refs.


Sensitivity and linearity  of Na,  K, Ca,  Mg, Fe,  Nn,  and  Zn  were
investigated  as functions  of element concentration,  absorption
                     Basic Science and Technology                         89

-------
profile, and acidity as applied to the preparation of acidic
sample solutions for atomic absorption determination of these
elements in samples such as cements, fertilizers, and clays.
Analytical results were compared using aqueous and 0.5 U HC1
standards.  Instruments used were a Beckman Model 979 Atonic
Absorption Spectrophotometer with a Beckman 10 in. Potentiometric
Recorder and Laminar Flow Burner.  In the special case of
calcium, type of flame and the use of lanthanum as a releaser were
also investigated.  Results show that preliminary removal of acid
before final dilution is not necessary as long as sample and
standard solutions have the same acid content.  The influence of
the change from aqueous to acid solutions on both percentual and
fluctuational sensitivity is demonstrated by experimental results
given in two tables.  The percentual sensitivity of Na, Ca, and
Hn did not change appreciably, while slight changes were observed
for other elements.  In general, better fluctuational sensitivity
was achieved with water solutions, except Cor Hg and Fe.  The
presence of acid tended to increase noise with the other elements.
Highest sensitivity was usually found at heights between 0.2 in.
and 0.5 in. over the top of the burner.  Height of the burner was
found to be critical for each element and should be rechecked
when switching from aqueous to acid solutions.  The method is
deemed applicable to analyses in which these elements have to be
determined in the presence of HC1 up to concentrations equal to
those tested (0.5 K HC1) .


03947                                                           159

B.  G. Russell
FLAHE-PHOTOHETRIC DETERMINATION OF SODIOH AND POTASSIUM IN
MANGANESE OBES.   Analyst (Cambridge) 91, (1085) 511-9,
Aug. 1966.


Two procedures are described; in one, the sample is dissolved
in hydrochloric acid, interfering elements are precipitated
with 8-hydroxy-guinoline in ammoniacal solution, and the
precipitate then extracted into chloroform.   Sodium and potassium
are determined in the aqueous phase by means of a filter flame
photometer.  The second procedure is more suitable for
routine use and involves the dissolution of the sample in
hydrochloric acid, followed by the addition of sulphuric
acid and aluminium nitrate to suppress interferences, and the
direct evaluation of the sodium and opotassium contents of the
solution by means of either a prism or a filter flame photometer.
Comparative results obrained by this alternative procedure on
instruments of these two types are given.  (Author abstract)#*
09594                                                            16°

Setser, D. W.


VIBRATIONALLY EXCITED 1,2-riCHIOROETHANA PRODUCED BY THE MEBCURI
PBOTOSEMSITIZATION OF DICHLOBCHE1HANE.   J. An. Chem.
Soc., 90(3):582 -587, Jan.  31,  1968.  31 refs.   (Presented in part
at the Midwestern Regional  American Chemical Society Meeting,
Lawrence, Kans. , Oct. 1966.)
90                HYDROCHLORIC ACID AND AIR POLLUTION

-------
The mercury photosensitization of dichloromethane has been examined
as a prototype method for generating chemically activated alkyl
halide nolecrules.  It is shown that if the chlorine atoms are
removed iron the reaction systen by a suitable scanvenger, then the
measured nonequilbium unimolecular rate constant for HC1
elimination from the chemically activated 1 ,2-dichloroethane formed
by association of chloronethyl radicals agrees well with previously
determined values,  some discussion of the reactions between the
various chlorine-substituted alkyl radicals that nay occur in the
propene-inhibited system is presented.  The chemically activated
1.3 -dicbloro-2-methyl propane formed by association of chloromethyl
and 1 -chloroisopropyl radicals does not undergo unimolecular
reaction down to pressures of 2 an.  Calculated estimates for the
HC1 elimination rate constant; from 1,3-dichloro-2-methylpropane
support this observation; similar calculations were also done for n
-chloropropane.  (author's abstract)

1H879                                                            161

Ukshe, Te. A. and V. N. Devyatkin


DIFFUSION OF HYDROGEN CHLORIDE IN FUSED KCL-HACL HIXTORBS.
(Eastvoreniye khloristogo vodoroda v raspla vlennykh smesyakh
KCl-NaCl) .  Text in Russian.  Zh. Fiz. Khim., vol. 39:3071-3076,
Oct. /Dec.  1965.  U refs.


Experimental data on the solubility of BC1 in molten mixtures of
NaCl and KC1 are presented, and the calculated heat of solution
is plotted.  Solubility was found to increase as the KC1 content
of the melt decreased.  Solubility decreased with temperature
when the NaCl-KCl mixture was eguimolar but increased with
temperature in all other cases  (0, 25, 75, and 100X NaCl).  The
heat of solution of HC1 depends upon salt composition and
exhibited a minimum for an eguimolar mixture.  It is proposed
that the heat of diffusion varies with mixture composition in
connection with a disruption of symmetry in the chloride lattice.
Heasurenent was based on the displacement of HC1 by argon using
a method described in an earlier article.
IJXshe, Te.  A. and V. N.  Devyamkin


DIFFUSION OF HTPROGEN CB10PIDS  IH  FUSED  SALTS.   (Rastvoreniye
khloristogo vodoroda v rasplavlennykh solyakh).   Text  in  Russian.
Zh. Piz. Khiw., vol. 39:2288-2291,  July-Sept.  1965.  10 refs.


The solubility of hydrogen  chloride in fused chlorides of lithium,
sodium,  potassium,  and rubidium was examined over a  wide
temperature range by displacement  with argon.   Solubility curves
are satisfactorily  described  by an  exponential equation.
Solubilities in the temperature range 800-1000 C occur in the
increasing  order: Licl,  NaCl, KC1,  RbCl.   Heats of solution  were
found  to be negative for LiCl,  NaCl, and KC1,  and positive for
RbCl.  The  heat of  solution was found to be in inverse relation
to the total crystalline ionic  radii of  the salts.  It is
suggested that proton-chloride  complexes with  a binding energy
of about 53.5 kcal/mole  are formed in the fused salts.
                     Basic Science and Technology                        91

-------
2COU1                                                            163

Vasil 'eva, A. H.


PBOBAEIE EOTFCTTC COMPOSITIONS CF CEBTAIN HIGHI,Y VOLATILE
SUBSTANCES.   (0 vercyatncin scstave evtektik nekotorykh
legkoletuchikh veshchestv).  Text in Russian.  Zh. Obshcb. Khim.
vol. 49:432-441, 1917.  7 refs.


theoretical and experimental data on eutectic composition and
temperatures are tabulated for the following systems:  ethane with
sulfur dioxide, hydrogen chloride, methyl chloride, carbon dioxide,
hydrogen sulfide, and ammonia; methyl alcohol with sulfur dioxide,
methyl chloride, carbon dioxide, hydrogen sulfide, ammonia, and
water; methyl chloride with hydrogen chloride; sulfur dioxide with
hydrogen chloride; and ammonia with water.
 17364                                                            164

 Bickert,  K.


 TESTS  C.H  FOBMATION  CF  FEC12  ftND  FECI3  BY  REACTIONS BETWEEN FE,
 FE304,  FE203  AND  HCL-COHTAlHIliG  GiSES.   (Versuche zur Bildung von
 FeC12  und ?eC13 aus Fe,  Fe304, fe203  und  HCl-haltigen Gasen).  Text
 in German.  Mitt. ?er. Grosskesselbesitzer,  49 (6):449-52,  Dec.
 1969.   5  refs.


 The reaction  of hydrogen chloride  containing gases with pulverized
 Fe, Fe304, and Fe203 was studied with  respect to temperature.
 Horeover,  the influence  of  water vapor and oxygen in the BC1-
 containing gases  on the  raction  with the  above  mentioned substances
 was studied with  respect to  tempera-tare.   For each.experiment,
 0.3 g  of  the  pulverized  substances were heated  in the presence
 of pure nitrogen.   Each  experiment lasted 4  hoars.  The HC1-
 containing gas  (100 cu cn/irin) was passed with  a speed of  0.44
 cm/sec  through the  reaction  chamber at a  temperature of 22 C.  The
 reaction  products were cooled tc room  temperature and the  weight
 changes of the substances were determined.  The reaction of Fe203
 with N2 containing  5*  by volume  HC1 forms FeC13.  The fraction  of
 solid  FeC13 decreases  with  increasing  temperatures while the
 volatile  FeC13 increases with the  temperature.   Below 320  C,
 volatile  and  solid  FeC13 are fcrned.   The reaction of Fe with the
 gas forms FeC12.  Above  670  C, no  solid FeC12 is found.  Above
 580 C,  FeC12  is increasingly sublimated.   The reaction with Fe304
 forms  FeC12 and FeC13.   The  fcriccr develops  primarily at low
 temperatures. The  maximum  FeC12 formation takes place between  200
 and 250 C.  The PeC13  is sublimated at 300 C.  The reaction of
 Fe304  with N2 containing 10* B20 and  5% HCl  forms solid FeC12 up to
 550 C.  Ho reaction takes place  between 550  and 700 C.  Above 300
 C, FeC13  and  Fecl2  form  which are  immediately converted to Fe203
 through the influence  of water vapor.   The reaction with Fe forms
 no Fe203  only Fe3C4.  Oxygen in  the gas like the water, vapor
 impairs the HCl reaction with Fe,  Fe203,  and Fe304.  The presence
 of water  vapor in addition  tc HCl  form volatile and non-volatile
 chlorides but to  a  much  lesser extend  than in the presence of BC1
 alone  in  the  gas.   Oxygen further  reduces chloride formation.
92                HYDROCHLORIC ACID AND AIR POLLUTION

-------
                        AUTHOR INDEX
Abar,  E.  L.   8, 97
Abe,  S.   *1
Alekseyeva,  M.  V.  *33
Alvarez,  A.   *34
Anderson, D. M.  106
Argent,  E. J.  154
            B

Back, K. C.  *94
Bagliano, G.  *139
Baikov, B.  K.  31
Barchas, M.  40
Barnebey, H. L.  *62
Barton, K.   *11S
Bartonova,  S.  115
Battigelli,  M. C.  *95
Baume, G.   *140, *141
Bean, S. L.  *2
Benson, S.  W.  149
Berkau, E.  E.  *142
Bhanti, D.  P.  76
Billings, C. E.  *63
Binger, W.  W.  *116
Bird, L. S.  110
Blanchard,  R. L.  *35
Blander, M.  143
Bloodworth,  M. E.  110
Bloomfield,  B. D.  *64
Bockris, J.  0. M.  148
Bogatyrev,  V. L.  92
Bohne, H.   *3, *109
Bondareva,  E. N.  *4
Bowman, D.  H.  74
Brandt, C.  S.  112
Braunstein,  J.  *143
Brockmeier,  N. F.  *144
Brown, R. H.  116
Buck, M.  *36
Bukina, V.  K.  157
Coll, H.  60
Collins, C. G., Jr.  *147
Conway, B. E.  *148
Cornish, H. H.  *8, *97
Cruickshank, F. R.  *149
Cupr, V.,  *150
Darling, D. R.  110
Dsvyamkin, V. N.  162
Devyatkin, V. N.  161
Demidov, A. V.  *39
Drexler, M.  *40
Duemmler, F.  *127
Eberhardt, H.  *67
Efiraova, V. K.  *98
Elfimova, E. V.  31, 33, *99,
  101,
Engelhardt, H.  *41, *42
Erman, J. E.  *69
Fenimore, C. P.  *10
Ferris, B. G., Jr.  *100
Fink, F.  *117
Fisher, G. T.  142
Forissier, M.  45
Frank, N. R.  100
Gadomski, S. T.  *70
Gandon, L.  78
Gil'denskiol'd, R. S.  31, 101
Gol'dberg, E. Kh.  *43
Goldfarb, T. D.  152
Gorban1, G. M.  *11
Gosselin, R. E.  106
Gusev, M. I.  *31, *101
 Carey, G. C. R.   56
 Carter, C. N.  *6S, *145
 Carter, J. S.  *5
 Chaigneau, M<  *37
 Chatfield, H. E.  *6,  *66
 Chernichenko, I. A.   58
 Clark, W. J.  110
 Coleman, P. D.   *38,  *146
           fl
Hannnond, W. F.  *12
Hantzsch, S.  *44
Hashimoto, M.  *128
Hatterex, A.  *45
Hayashi, M.   *46
                                93

-------
Heck, W. W.  *110
Heller, A.  *129
Henderson, J. A.  106
Hengsstenberg, F.  95
Herold, P.  *72
Hersch, P. A.  *45, *151
Hexter, R. M.  *1S2
Hirayama, N.  *13
Horn, K.  *132
Ingels, R. M.  66
Ingruber, 0. V.  30
Markus,  G.   72
Mastromatteo, E.   *16,  *102
Mathys,  L.   *79
Matsak,  V.  G.  *80
Mayer, W.   67
Maziarka, S.  61
Melekhina,  V. P.   52, *103
Moegling, E.  *17
Mokhov,  L.  A.  39
Mozan, C.   *18
Mueller, R.  F.  *155
Muffley, H.  C.  *121
Mukamraal, E. I.  *112
                                 Neuwirth, R.   112
                                 Nietruch, F.   *54
                                 Nowak, F.  *122
Jones, G. W.  10
Jones, M. M.  142
Ordoveza,  F.  E.   *55
Ostring, M.   158
Katz, M.  *134
Kempner, S. K.  *74
King, J. C.  82
Knott, K. H.  *75
Konda, K.  *15, *118
Koshi, S.  46
Kosinski, K.  61
Kotrappa, P.  *76
Krivoruchko, F. D.  *32
Kuczynski, E. R.  *48
Kurker, C., Jr.  63
Pack,  D. H.   112
Page,  F. M.   *156
Palkot, E. J.,  Jr.   *82
Pamfil, G. P.   141
Petschl, G.   49
Pettinati, L.   18
Phair, J. J.   *56
Phelps, A. H.   *83
Porter, M. B.   110
Prescher, K.  E. 44,  54
Prokop'yeva,  M. F.   *157
LaCasse, N. L.  125
Lacquaniti, A.  18
Laengle, E.  *119
Lederer, E. L.  *153
Lefferts, D. T.  50
Leithe, W.  *49
Leone, P.  *77
Levine, B. S.  39
Linch, A. L.  *50
Linton, H.  148
Littlewood, R.  *1S4
Ludwick, J. D.  *51
Ramirez-Munoz, J.  *1S8
Reh, L.  *20
Rispoli, J. A.  *23
Rjazanov, V. A.  *105, *136
  See:   Ryazanov
Rogers, R. R.  120
Roldan, R.  38, 146
Rolfe,  T. J. K.  *84
Rose, G.  *24
Roth, M.  158
Russell, B. G.  *159
Russell, W. E.  *25
Ryazanov, V. A.  *136, *137
  See:   Rjazanov
McLeod, W.  *120
Manita, M. D.  *52
Mannella, R. J.  95
Marcheguet, H. G. L.  *78
Sakabe, H.  46
Santarromana, M.  37
Saunders, R. A.  *26
Schiemann, G.  *27
Seiler, Ed.  *86
94
                  HYDROCHLORIC ACID AND AIR POLLUTION

-------
Seller, E. N.  74
Seleznev, B. E.  *S8
Setzer, D. W.  *160
Shephard, R. J.  56
Sheppard, S. V.  *87
Sherwood, P. W.  *123
Sherwood, T. K.  *88
Shivandronov, Yu. A.  92
Silvernman, L.  63
Simon, H.  12
Smith, R. P.  *106
Smith, W. S.  *28
Stahl, Q. R.  *29
Stalzer, R. F.  50
Stayzhkin, V. M.  *107
Styazhkin, V. M.  *108, *138
Sutton, P.  *130
Swinbank, W. C.  112
Teske, W.  *89
Thomas, A. P.  95
Thomson, M. L.  56
Tomany, J. P.  *90
Turkolmez, S.  75

            u
Uhi, K.  *59
Ukshe, Ye.  *161, *162
Vasil'eva, A. M.  *163
Volkening, V. B.  *91, *124
Vulikh, A. I.  *92

           W
Wagner, R. H.  116
Wall, H., Jr.  2
Weidensaul, T. C.  *125
Wenzl, H. F. J.  *30
West, P. W.  55, 60
Wickert, K.  *164
Wolozin, H.  *131
Wyszynska, H.  *61
Yablochkin, V. D.  11
Yamate, N.  *93
Yas'kova, V. Z.  4

            z
Zagorskaya, M. K.  92
                            Author Index                             95

-------
                          TITLE INDEX
Absorption of Hydrogen Chloride
  Gas and Sulfur Dioxide in
  Sulfuric Acid and Acetic
  Acid.  150

Adsorption of Metal Ions
  From HF-HC104 Mixtures on
  Exchange Papers.  139

Air Pollutants, Meteorology,
  and Plant Injury.  112

Air Pollution and Chemical
  Industry.  25

Air Pollution and Disease.
  100

Air Pollution in Petroleum
  Refining.  130

Air Pollution (A Survey of
  Existing Legislation).
  126

Air Pollution by Toxic Gas
  and its Counter Measure.
  93

Analyzing Amine Traces in
  Atmospheric 
-------
Corrosion of Metals by
  Aqeous Solutions of
  the Atmospheric Pollutant
  Sulfurous Acid.  120

Corrosion Problems in In-
  cinerators.  122

Criteria and Methods for
  Establishing Maximum
  Permissible Concentrations
  of Air Pollution.  105, 136
Data for Hygienic Evaluation
  of Hydrochloric Acid Aerosol
  (Hydrochloric Gas) as an
  Atmospheric Pollutant.  99

Design for Air Pollution
  Control.  Selecting Tower
  Packing.  86

Design of an Improved Device
  for Absorption With Chemical
  Reaction.  82

Desulfurization Using Hydrogen
  Chloride and Hydrogen.  69

Determination of Acidic Gases
  in Working Environments by
  Alkali Filter Paper.  59

Determination of Aerial
  Concentration of Decomposition
  and Oxidation Products of
  Certain Organoaluminum
  Compounds.  32
Development and Testing of a
  Filter Cartridge for the
  Elimination of Disturbing
  Influences at the Measure-
  ment of Sulfur Dioxide in the
  Atmosphere.  36

Diffusion of Hydrogen Chloride
  in Fused KCl-NaCl Mixtures.
  161

Diffusion of Hydrogen Chloride
  in Fused Salts.  162

Dry-Packed Beds for the
  Removal of Strong-Acid Gases
  From Recycled Atmospheres.
  70
Determination of Hydrochloric
  Acid in the Presence of
  Sulfur Dioxide With the Use
  of Solid Reagents.  37


Determination of Mist Size by
  Metal Coated Glass Slide.
  46
Determination of Sulfur Dioxide
  With Pararosaniline and
  Formaldehyde.  54
Determinations of the Combined
  Effect of Toxic Substances
  in Predictions of Atmospheric
  Pollution.  31, 101
Effect of Aqueous Contaminants
  on the Redox Potential of
  Chloride Melts.  154

Effects of Gaseous Air Pol-
  lutants on the Response of
  the Thomas S02 Autometer. 48

Effects of PH and Oxidizing
  Agents on the Rate of Ab-
  sorption of Hydrogen Sulfide
  into Aqeous Media.  65, 145
Electrical Properties of
  Materials in the Far
  Infrared Region.  38, 146

Emission Sources of HC1 and
  NHj and Their Standard
  Control Equipment.  9, 68

Energetics of HC1 and HF
  in Volcanic Emanations.
  155
Environmental Pollution by
  Missile Propellants.  110
Estimation of Gaseous Acid
  in Domestic Premises.  56

Evaluation of the Risk
  Presented by Industrial
  Poisons.  18

Experiences With Refuse In-
  cinerators in Europe,
  Prevention of Air and
  Water Pollution, Operation
  of Refuse Incineration
  Plants Combined With
  Steam Boilers, Design and
  Planning.  68
98
                  HYDROCHLORIC ACID AND AIR POLLUTION

-------
Experimental Basis for the
  Determination of Allowable
  Concentrations of Chlorine
  and HC1 Gas Simultaneously
  Present in Atmospheric Air.
  108, 138
             F
Federal Fiscal Policy in Air
  Pollution Control.  131

Field Evaluation of Exhaust
  Gas From Refuse Incinerator
  Related to Air Pollution
  and Metal Corrosion.  15, 118

Fight Against Air Pollution in
  Argentina, Educational,
  Legal and Technological
  Aspects.  23

Filtering Gas Masks Containing
  Ion-Exchange Resins.  85

Flame-Photometric Determination
  of Sodium and Potassium in
  Manganese Ores.   159

Fractional Determination of
  Hydrochloric Acid Aerosol
  and of Chlorides  in Atmos-
  pheric Air.  33

Freezing Point of Gaseous
  Mixtures at Very  Low
  Temperatures.  140
Gas Absorption Equipment.  66

Gas Analyzer  for  the Measure-
  ment of  Impurities in  Air.
  42
 Health  Aspects  in Fire  Fight-
   ing.   16,  102

 How Atmospheric Conditions
   Can Corrode Refinery  Equip-
   ment.  123

 Hydrochloric Acid Manufacture,
   Report No. 3.  14

 Hydrochloric Acid System in
   Atomic Absorption Flame
   Photometry.  158
Hygienic Determination of
  Limits of Allowable Concen-
  trations of Chlorine and
  Hydrochloride Gases
  Simultaneously Present in
  Atmospheric Air.  107

Hygienic Effect of Average
  Twenty-four Hour Allowable
  Concentrations of Chlorine
  and Hydrochloric Gases
  Simultaneously Present in
  the Atmospheric Air.  98

Hygienic Evaluation of Atmos-
  pheric Air Pollution in
  the Vicinity of the Industrial
  Plant 'Krasnyi Khimik'.  4
             I
Identification and Measurement
  of Hydrogen Chloride Gas
  in the Atmosphere by
  Spectrophotometric and
  Radiometric Analysis.  51

Improvements in the Processes
  and Operation of Plants in
  the Chemical Industry Leading
  to Reduced Emission. 89

Immission Damage Caused by
  Hospital Waste Incineration.
  3, 109

Incineration and Thermal
  Cracking of Liquid and
  Pasteous Refuse.  20

Industry and Atmospheric Pol-
  lution in Great Britain.  133

Influence of Atmospheric Con-
  taminants on Corrosion-
  Literature Report.  121

Influence of Axial Dispersion
  on the Fixed Bed Adsorption
  of the Hydrogen Chloride-
  Chromium Oxinate System.  142

Infra-Red Spectra of Quinol
  Clathrate Compounds.  152

Investigations of the Cor-
  rosion-Causing Properties
  of Volatile Acids and
  Anhydrous Acids.  119
                              Title Index
                                 99

-------
Krupp Rotary Brush Scrubber
  for the Control of Gas,
  Vapour, Mist and Dust
  Emissions.  75
Maximum Permissible Concentra-
  tions for Air Pollution in
  the Federal Republic of
  Germany.  129
Mechanism of the Corrosion of
  Fe, Zn.and Cu in a Humid
  Atmosphere Containing HC1
  Vapors.  115

Methods of Study of Atmospheric
  Air From the Hygienic Point
  of View.  61

Methyl and Ethyl Mercury Com-
  pounds-Recovery From Air
  and Analysis.  50

Mierodetermination of Caffeine
  Using the Ring Oven Technique.
  55

Mucociliary Activity.  95
 Performance of Commercially
   Available Equipment in
   Scrubbing Hydrogen
   Chloride Gas.  74

 Photometric Determination of
   Small Amounts of Volatile
   Mineral Acids (Hydrochloric
   and Nitric) in the Atmos-
   phere.  43
 Pollution b'y Chlorine in
   Coal Combustion.  19

 Practical Aspects of Refuse
   Incineration on the Example
   of Essenkarnap.   17
 Preliminary Air Pollution
   Survey of Hydrochloric
   Acid:  A Literature Review.
   29


 Preparation and Analysis of
   Calibrated Low Concentrations
   of Sixteen Toxic Gases.  57

' Present Status of Air Pollution.
   1

 Principles  and Practices of
   Kraft Black  Liquor
   Evaporation.   30
New Data on Limits of Allowable Probable Eutectic Composition
  Atmospheric Air Pollutants.     of  Certain Highly Volatile
  137                             Substances.   163
New Gas Scrubber Removes 0.1
  Micron Dust.  81

New Scrubber for the Control
  of Waste Gases Formed During
  Chlorinization of Aluminum.
  79
On the Question of Improving
  Some Polyvinyl Chloride
  Polymers and a Method of
  Improving Their Toxicity.  11
Performance of Coating on
  Metal in an Industrial
  Atmosphere.  91, 124
 Problem of Combined Action
   of Three Mineral Acids.
   103

 Problem of Hygienically
   Permissible Limiting Concen-
   trations of Air Pollution.
   132

 Procedure for Extracting
   Sulfur Dioxide From Gases
   Containing It.  78

 Proton Conductance and the
   Existence of the H30(I)
   Ion.  148
 Pseudochromatographic Micro-
   analysis Utilizing Gas-
   Solid Equilibria.  Deter-
   mination of N02, NOC1, C12,
   HC1, COZ and H20.  45
100
                  HYDROCHLORIC ACID AND AIR POLLUTION

-------
Purification of Air Polluted
  by Vapors and Gases.  80
Quantitative Investigations of
  Volatile Systems:  Fusibil-
  ity Curves of Systems Formed
  by Hydrochloric Acid and
  Sulfur Dioxide With
  Methylalcohol:  Mechanism
  of the Formation of Esters.
  141
Rapid Determination of Lead-210
  and Polonium-210 in Environ-
  mental Samples by Deposition
  of Nickel.  35
Rapid Method for the Deter-
  mination of Harmful Gases
  Vapors in the Air.  39
and
Recent Development in Ambient
  Air Quality Guides in
  Relation to Control of
  Atmospheric Effluents.  134

Recommendations for Allowable
  Concentration (1966).  135

Recovering Hydrogen Chloride
  and Sulphur Dioxide From
  Gas Mixtures.  72

Recovery and Use of Sulfur
  Dioxide in the Sulfur Ex-
  traction Process.  77
Refuse Incineration.  84

Remarkable Measures for the
  Improvement of Air Quality.
  21

Removal of Exhaust Odors From
  Solvent Extraction Operation
  by Activated Charcoal Ad-
  sorption.  62

Research on Chemical Odors.
  Part I -- Odor Thresholds
  for 53 Commercial Chemicals.
  22

Research on the Refuse In-
  cinerators From the Viewpoint
  of Smoke Properties.  13
    Resin Kettles.  6

    Resistance of Aluminum Alloys
      to Chemically Contaminated
      Atmospheres.  116

    Results of Emission Measure-
      ments From Community
      Incinerators.  27

    Review of Air Force Data
      From Long Term Continuous
      Exposure at Ambient
      Pressure.  94

    Review of Sulphur Flame
      Technology.  147
            s
Scientific Methods and
  Techniques to Decrease
  the Pollution of the
  Environment Through
  Inhalation or Ingestion,
  and of Acoustical
  "Nuisances".   85

Secondary Aluminum-Melting
  Processes.  12
    Selection and Testing of Solid
      Carriers in the Chromatography
      of Corrosive Inorganic Gases.
      157

    Simultaneous Removal of Acid
      Gases, Mists, and Fumes With
      Mineral Wool Filters.  63

    Smoke Puff Generator Room Air
      Movement Studies.  76

    Solubilities of Sulfur Dioxide
      and Ammonia in Water.  88

    Some Thermochemical Properties
      of Methyl Vinyl Ether, Alpha-
      Chloroethyl Methyl Ether,
      and lodomehyl Methyl Ether.
      Evidence for Nonbonded
      Electrostatic Interactions.
      149

    Spectrophotometric Determination
      of Chloride in Air.  60

    Spectrophotometric Determination
      of the Concentration of
      Chlortetracycline in the
      Air.  58
                             Title Index
                                   101

-------
Spectrophotometric Method for                yy
  the Determination of Nitric
  and Hydrochloric Acids in the  What Doesn't Go Up Must
  Atmospheric Air in the           Come Down.  83
  Presence of Nitrates and
  Chlorides.  52                 Will Trash Removal be a
                                   Marketing Factor for
Statewide Survey of Air Pol-       the Glass Container
  lution Damage to Vegetation-     Industry and Producers
  1969.  125                       of Other Packaging
                                   Material?  24
Status of Air Pollution by
  Noxious and Offensive Gases.
  and Their Control Programmes.
  128

Study of the Stability of
  Gaseous Negative Ions.  156

System for Control of Aluminum
  Chloride Fumes.  90
Tests on Formation of
  and FeCIs by Reactions
  Between Fe, Fe304, PezG3
  and HC1 - Containing Gases.
  164

Thermodynamics of Dilute
  Solutions of AgNO, and
  KC1 in Molten KNOf From
  Electromotive Force
  Measurements.  III.
  Temperature Variations
  of the Activity Coeffi-
  cients.  143

Toxicity of Pyrolysis Pro-
  ducts of Vinyl Plastics.
  8, 97
Verifying Adsorption
  Formulas by Means of
  Adsorption Measurements
  With Activated Charcoal.
  153

Vibrationally Excited 1,2-
  Dichloroethane Produced
  by the Mercury Photo-
  Sensitization of Dichloro-
  methane.  160
102               HYDROCHLORIC ACID AND AIR POLLUTION

-------
                        SUBJECT INDEX
Absorbent  53
Absorbent Solution  ISO
Absorption  82, 88
Absorption Capacity  150
Absorption Rate  145
Absorption Spectra  54
Absorption Tests 49
Acid Gases  63
Acidic Gases  59
Activated Charcoal  153
Adsorption  106
Adsorption Curves  142
Adsorption Data  153
Air Quality Guides, U. S.
  and International  134
Aliphatic Amines  44
Alkali Act (England)  133
Alkali Filter Paper
  Method  59
Allowable Concentrations
  99, 135
Aluminum Chlorinization  79
Aluminum Fluxing  12
Aluminum Processing  90
Analytical Methods  57
Animal Experiments  8
Animal Exposures  94
Aqueous Media  145
Aromatic Compounds  72
Atomic Absorption  158
Automatic Analyzer  41
           B
Binary Systems  141
Black Liquor Evaporation  30
Chlorine Compound  19
Chlorine Gas  77
Chlorine Vapors  90
Chlortetracycline  58
Chromatography  157
Closed-Environment  26
Coal Combustion  19
Common Poisons  106
Condensation  45
Control Equipment  9
Control Methods  93
Control Technology  64
Corrosion  61, 71, 83, 115,
  116, 117- 118, 119, 120,
  121, 122, 123
Corrosive Inorganic Gases 157
Decomposition  32
Desulfurization  69
Devices  47
Dichloroethana  160
Discolorization  109
Electroconductivity Principle
  42
Emission, Control  134
Emission Inventories  21, 28
Emission Measurements  27
Eutectic Compositions  163
Exposure Chambers  94
Caffeine  55
Carbonization  96
Chemical Industry  25
Chemical Plants  89
Chemical Reactions  82, 141
Chemical System  144
Chloride Formation  164
Chloride Melts  154
Chlorine  91, 98, 107, 108,
  124, 138
Far Infrared Region  146
Federal Fiscal Policy  131
Ferrous and Nonferrous
  Metals  121
Filter Cartridge  36
Filter Flame Photometer  159
Fire Fighters  16, 102
Fixed-Bed Adsorption Column
  142
Foreign Legislation  126
Freezing Point  140
                               103

-------
Fruit Skins and Peelings  62
Fused KC1   NaCl  161
Fused Salts  162
                          L

               Limits of Allowable Concen-
                 trations   107
               Literature  Review  29
               Literature  Search  88
Gas Absorption  66
Gas Adsorption Phenomena
Gas Analyzer  42
Gas Separation  45
Gaseous Acids  56
Gaseous Impurities  47
Gaseous Mixtures  140
Guinea Pigs  98
        40
           H

Health Effects  61
Hydrochloric Acid  37, 52, 62,
  83, 90, 91, 96
Hydrochloric Acid Aerosol  33
Hydrochloric Acid Fog  79
Hydrochloric Acid Gas  108, 138
Hydrochloric Acid Systems  158
Hydrochloric and Nitric
  Acid  43
Hydrochloride  Gases  98, 99,
  107
Hydrogen Chloride  9, 68, 72, 78,
  90, 109, 125, 161, 162
Hydrogen Chloride Gas  51
Hydrogen Chloride, Reaction  164
               Magnesium Plant  99,  108
               Magnetron Technique  156
               Mathematical Model   142
               Maximum Allowable Concen-
                 trations  98, 105,  129,
                 136,  137,  138
               Measurement, Electromotive
                 Force  143
               Mercury Photosensitization
                 160
               Metal Coated Glass  Slide
                 46
               Metal Ions  139
               Meteorology   112
               Methodology   137
               Methyl  and Ethyl Compounds
               Microdetermination   55
               Micro-titration  33
               Microwave Discharge  144
               Mineral Acids  103
               Mineral Wool Filters  63
               Missile Propellants  110
               Mucociliary  Activity  95
 50
                                Noxious Gases   87
            I

Impingers  44
Incineration  17, 20, 84
Incineration, Hospital Waste
  3, 109
Incinerator Exhaust Gas  15,
Incinerators  122
Incinerators, Community  27
Incinerators, Refuse  13
Industrial Plants 4,9, 27
Industrial Poisons  18
Industrial Sources  21
Industrial Waste Gases  5
Infra-Red Spectra  152
Ion-Exchange Resins   92
Ions, Gaseous Negative  156
               Odor  99
               Odor Thresholds   22
               Organoaluminum Compounds
               Oxydizing Agents   65,  145
32
           118
               Pennsylvania  125
               Permissible Limits  132
               Photometric Determination ' 43
               Picoflux  42
               Plant Injury  112
104
HYDROCHLORIC ACID AND AIR POLLUTION

-------
Plants  110
Plastics  24, 96
Polyvinyl Chloride  96
Polyvinyl Chloride Polymers
  8, 11
Polyvinyl Chloride Tapes 11
Power Plants  21
Prism Flame Photometer  159
Protective Coating  91, 124
Protone Conductance  148
Pyrolysis Products  97
    Statistical Mechanical Methods
      149
    Steam Generators  67
    Strong-Acid Gases  70
    Sublimation  45
    Sulfur Dioxide  34, 37,  54,
      77, 78, 141
    Sulfur Flame Technology  147
    Survey,  Statewide  125
Quantitative Response  48
Quinol Clathrate Compounds
Rats  96, 97
Recovery and Purification
  Methods  80
Redox Potential  154
Refuse Firing  67
Resin Production  6
Respiratory Diseases  100
Respiratory Epithelia  95
Ring Oven Technique  55
    Techniques  47
    Thermochemical Data  155
    Thermochemical Properties 149
    Thermodynamics  143
152 Thomas  SO, Autometer
    Threshold Concentrations  103
    Toxic Gases   57
    Toxic Substances  105
    Toxic Substances, Combined
      Effect  31, 101
    Toxicity  8,  26, 96
    Toxicology  94
    Transfer Processes  148
    Vacuum Monochromator  38, 146
    Vegetation  85, 109, 125
    Venturi System  71
    Vinyl Plastics  8, 97
    Volatile Substances  163
    Volcanic Emanations  155
Scrubber Designs  87
Scrubber Packing  86
Scrubbers  62, 74, 7S, 79, 81
Scrubbing  71, 82
Sodium Chloride  77
Soils  110
Soot Aggregates  10
Space Cabin Atmospheres  94
Spectrophotometric
  Determination  58
Spectrophotometric Deter-
  mination of Chloride in
  Air  60
Spectrophotometric Method  52
Spectrophotometric and
  Radiometric Analysis  51
Stacks  5
Standards $ Criteria  136
                                 Wash  Bottles   44,  49
                                 West  and Gaeke Method   54
                           Subject Index
                                    105

-------
                GEOGRAPHIC LOCATION  INDEX

                    Foreign (Countries, Cities)

Argentina  23                   Germany,  East   132
England  133                    Japan  1, 15,  93, 118, 128,
Europe  67                        135
Germany  127, 129                  Tokyo  9,  13, 68
  Cologne  21, 27                New Zealand  25
  DUsseldorf  27                Poland 61
  Essen-Karnap  17              Switzerland, ZUrich 117
                                U. S. S.  R.  4, 11, 99, 101,
                                  105, 136,  137
                                107

-------