Office of Pesticides EPA 700/K-92-001
and Toxic Substances January 1992
A EPA The Emergency
Planning and
Community
Right-to-Know Act
Section 313
Release
Reporting
Requirements
-------
This brochure contains information about the Emergency
Planning and Community Right-to-Know Act. This law estab-
lishes a structure at the state and local levels to assist communi-
ties in planning for chemical emergencies and requires facilities
to provide information on various chemicals present in the com-
munity. The Act requires that this information be made available
to the public One of the requirements concerns the reporting
of annual releases of toxic chemicals to the air. water, and land.
These provisions are outlined in Section 313 which mandates
annual release reporting for over 300 chemicals. Other reporting
requirements are included elsewhere in the Act. This booklet
deals with Section 313.
It is important that you read this information to see if you
are subject to Section 313 reporting requirements. The first
reports under this Section, covering the 1987 calendar year.
were due by July 1. 1988. Reports for subsequent calendar
years are due the following July 1. EPA is responsible for ad-
ministering this Section and developing a database that will
make information in the reports available to the public.
The Emergency Planning and Community Right-to-Know
Act is important in providing to the public information about
chemicals in the community. I look forward to working with you
to make its implementation a success.
William K. Rellly
Administrator,
Environmental Protection Agency
-------
THE EMERGENCY
PLANNING AND COMMUNITY
RIGHT-TO-KNOW
ACT
EPA has prepared this brochure to alert
businesses to their reporting obligations under Sec-
tion 313 of the Emergency Planning and Community
Right-to-Know Act (EPCRA)*, and to help you de-
termine whether your facility is covered under the
law. If you are covered, this brochure will also help
you prepare to meet your reporting obligations. If
you are uncertain whether you are covered, it will
tell you how to get assistance.
This brochure deals with reporting requirements
of only one section of the Emergency Planning and
Community Right-to-Know Act: Section 313, which
pertains to release reporting. Other EPCRA plan-
ning and reporting requirements may also affect
your business. The nearest EPA regional office can
provide complete details, but the other basic re-
quirements of EPCRA are as follows:
Facility owners/operators that have on their
premises chemicals designated under
EPCRA as "extremely hazardous substances"
must cooperate with state and local planning
officials In preparing comprehensive emer-
gency plans (Sections 302 and 303);
•
Facility owners/operators must report acci-
dental releases of "extremely hazardous sub-
stances" and CERCLA "hazardous sub-
stances" to state and local response officials
(Section 304); and
* The Act is also known as Title Ml of SARA (the Superfund
Amendments and Reauthorization Act of 1986).
-------
Facility owners/operators must make Material
Safety Data Sheets (MSDSs) available to local
and state officials and must also report, to lo-
cal and state officials, inventories (Including
locations) of chemicals on their premises for
which MSDSs exist (Sections 311 and 312).
•
For more information on the Emergency Plan-
ning and Community Right-to Know Act, ask your
regional EPA office for the EPCRA Fact Sheet; or
call the Emergency Planning and Community
Right-to-Know Information Hotline, (800) 535-0202
or (703) 920-9877.
REPORT TOXIC
CHEMICAL RELEASES
Under Section 313 of the Emergency Planning
and Community Right-to-Know Act, certain busi-
nesses are required to submit reports each year on
the amounts of toxic chemicals their facilities re-
lease into the environment, either routinely or as a
result of accidents. The purpose of this reporting
requirement is to inform government officials and
the public about releases of toxic chemicals into the
environment. Section 313 requires facilities to re-
port releases to air, water, and land. The reports
must be sent to the United States Environmental
Protection Agency (EPA) and to designated state
agencies. Reports are due by July 1 each year.
Those who fail to report as required are subject to
civil penalties of up to $25,000 a day.
The final Toxic Chemical Release Inventory rule
under Section 313 was published in the Federal
Register on February 16, 1988.
-------
WHO MUST REPORT
A plant, factory, or other facility is subject to
the provisions of Section 313 if it meets all three of
the following criteria:
It conducts manufacturing operations (is in-
cluded in Standard Industrial Classification
(SIC) codes 20 through 39, listed on page 9);
and
•
It has 10 or more full-time employees (or the
equivalent 20,000 hours per year); and
•
It manufactures, Imports, processes, or other-
wise uses any of the toxic chemicals listed on
pages 15-24 in amounts greater than the
"threshold" quantities specified below. At
present, 317 individual chemicals and 20 cate-
gories of chemicals are covered. The list may
be changed In future years,
•
THRESHOLDS
Thresholds are specified amounts of toxic
chemicals used during the calendar year that trigger
reporting requirements.
If you manufacture or import any of the listed
toxic chemicals, the threshold quantity will be:
• 25,000 pounds per toxic chemical or
category over the calendar year.
If you process any of the listed toxic chemicals,
the threshold quantity will be:
• 25,000 pounds per toxic chemical or
category over the calendar year.
If you otherwise use any of the listed toxic
chemicals (without incorporating it into any product
or producing it at the facility), the threshold quantity
is:
• 10,000 pounds per toxic chemical or
category over the calendar year.
-------
What is meant by the terms "manufacture,"
"process," or "otherwise use"?
• Manufacture - means to produce, prepare,
import or compound one of the toxic chemi-
cals on the I ist. For example, if you make a dye
for clothing by taking raw materials and react-
ing them, you are manufacturing the dye. You
would also be covered if you were a textile
manufacturer who imported a dye on the list for
purposes of applying it to fabric produced at
your plant.
• Process - in general, is the incorporation of a
toxic chemical into a product and includes
making mixtures, repackaging, or using a
chemical as a feed-stock, raw material, or
starting material for making another chemical.
Examples of processing include:
a Adding a solvent as a diluent when mak-
ing a paint, coating, or other mixture;
n Using a chemical as reactant in the
manufacture of a pesticide (e.g., using
chemical A to make chemical B).
• Otherwise Use - applies to any use of a toxic
chemical at a covered facility that is not cov-
ered by the terms "manufacture" or "process"
and includes use of a toxic chemical contained
in a mixture or trade name product. A toxic
chemical that is otherwise used by a facility is
not intentionally incorporated into a product
distributed in commerce.
Examples include:
o Using a metal cutting fluid that contains
diethanolamine;
n Using a heat transfer fluid containing
biphenyl;
a Using trichloroethylene to degrease
tools;
n Using chlorine in waste water treatment;
a Using Freon 113 as a refrigerant to cool
process streams.
-------
Section 313 defines a "facility" as all buildings,
equipment, structures, and other stationary items
which are located on a single site or on contiguous
or adjacent sites and which are owned or operated
by the same person. Warehouses on the same site
as covered facilities are covered at the threshold
levels given above. Stand-alone warehouses that
do not support a manufacturing operation are not
currently covered.
The reporting thresholds apply to toxic chemi-
cals known by the owner or operator to be used in
amounts above the thresholds. Section 313 re-
quires suppliers of mixtures and trade name prod-
ucts to notify customers of the presence of Section
313 listed toxic chemicals in their products beyond
certain de minimis concentrations (these cutoffs are
discussed under "Exemptions"). This supplier notifi-
cation requirement has been in effect since January
1, 1989.
EXEMPTIONS
Under certain circumstances, some or alt of
the reporting requirements under Section 313 may
not apply to a facility. The following are the major
exemptions:
^- De minimis concentrations of a toxic chemical in
certain mixtures. In determining whether the amount of a
toxic chemical used at your facility exceeds the reporting
threshold listed on page 3, you are not required to count
the amount of chemical present in a mixture If
its concentration Is less than 1 percent of the
mixture, or
•
Its concentration Is less than 0.1 percent of
the mixture when the chemical is defined by
the Occupational Safety and Health
Administration (OSHA) as carcinogenic; the
chemical list beginning on page 15 identifies
these chemicals.
-------
^ Articles. In considering whether a reporting thresh-
old has been exceeded, you are not required to count
toxic chemicals present in articles processed or used at
your facility. An "article" is a manufactured item: (1)
which is formed to a specific shape or design during
manufacture; (2) which has end use functions dependent
in whole or in part upon its shape or design during end
use; and (3) which does not release a toxic chemical un-
der normal conditions of processing or use of that item at
the facility or establishments.
^ Specified Uses. In considering whether a reporting
threshold has been exceeded, you are not required to
count toxic chemicals that are used at your facility for any
of the following purposes:
As a structural component of the facility;
In routine janitorial or facility grounds mainte-
nance;
In foods, drugs, cosmetics, or other items for
personal use, including supplies of such
items (for example, in a facility-operated
cafeteria);
In motor vehicle maintenance (including mo-
tor fuel); or
In process water and non-contact cooling
water as drawn from the environment or from
municipal sources, or in air used either as
compressed air or as part of combustion.
-------
^- Laboratory Activities. In considering whether a re-
porting threshold has been exceeded, you are not re-
quired to count toxic chemicals that are manufactured,
processed, or otherwise used for research or quality con-
trol in a laboratory at a covered facility under the supervi-
sion of a technically qualified individual. This exemption
does not apply to production, processing, or the use of
toxic chemicals in pilot plant scale operations and labo-
ratories for distribution in commerce.
^ Owners of Leased Property. The owner of a cov-
ered facility is not subject to reporting under Section 313
if the owner's only interest in the facility is ownership of
the real estate upon which the facility is operated. How-
ever, the operator of the facility must report if the criteria
are met.
-------
HOW TO REPORT
I he owner or operator of a covered facility
must report annually. Reports must be submitted on
or before July 1 and cover activities that occured at
the facility during the previous calendar year.
EPA will provide a reporting form (EPA Form R)
with instructions and technical guidance on how to
calculate toxic chemical releases or emissions from
your facility. For information on how to obtain the
reporting form and instructions contact the Emer-
gency Planning and Community Right-to-Know In-
formation Hotline. For other technical guidance,
write a letter or check the boxes for those publica-
tions on the back cover, detach the cover, and mail
it to: Emergency Planning and Community Right-to-
Know Document Distribution Center, P.O. Box
12505, Cincinnati, OH 45212, or any of the EPA
regional offices listed on pages 13-14.
You are not required to measure or monitor re-
leases for purposes of Section 313 reporting. You
may use readily available data to report the quanti-
ties of chemicals that you use and the amounts re-
leased into the environment. If you have no data
available, the law permits you to report reasonable
estimates. EPA's technical guidance on calculating
releases can help you in making estimates.
8
-------
STANDARD INDUSTRIAL
CLASSIFICATION (SIC)
GROUPS SUBJECT TO
SECTION 313
SIC INDUSTRY GROUP
20 Food
21 Tobacco
22 Textiles
23 Apparel
24 Lumber and Wood
25 Furniture
26 Paper
27 Printing and Publishing
28 Chemicals
29 Petroleum and Coal
30 Rubber and Plastics
31 Leather
32 Stone, Clay, and Glass
33 Primary Metals
34 Fabricated Metals
35 Machinery (excluding electrical)
36 Electrical and Electronic Equipment
37 Transportation Equipment
38 Instruments
39 Miscellaneous Manufacturing
If you do not know your SIC code, check with your finan-
cial office, trade association, or Segal counsel, or contact
your local Chamber of Commerce or State Department
of Labor.
For more information on SIC codes, please consult
"Standard Industrial Classification Manual 1987,"
available in most libraries or for purchase from:
National Technical Information Service
5285 Port Royal Road
Springfield, VA 22161
Phone: (703) 487-4650
Document Number: PB 87-100012
$30.00
-------
WHAT YOU
MUST REPORT
You must report on EPA Form R the following
information for each listed toxic chemical manu-
factured, imported, processed, or otherwise used
at your facility in yearly amounts which exceed the
threshold:
The name and location of your facility;
•
The Identity of the listed toxic chemical (unless
you claim Its Identity to be a trade secret):
•
Whether you manufacture, Import, process, or
otherwise use the toxic chemical;
•
The maximum quantity of the toxic chemical
on-slte at any time during the year;
•
The total quantity of the toxic chemical released
during the year, Including both accidental spills
and routine emissions - separate estimates must
be provided for releases to air, water, and land
(e.g., deep well Injection, permitted landfill);
•
Off-site locations to which you shipped wastes
containing the toxic chemical and the quantities of
that toxic chemical sent to those locations for re-
cycling, treatment, or disposal;
•
On-slte recycling, treatment, or disposal methods
used for wastes containing the toxic chemical and
estimates of their treatment efficiency for each
toxic chemical;
•
The total quantity of the toxic chemical entering
waste prior to recycling, treatment, or disposal;
and
•
Source reduction activities and other pollution pre-
vention data involving the toxic chemical.
10
-------
For purposes of Section 313, a release Is
defined as any spilling, leaking, pumping, pouring,
emitting, emptying, discharging, injecting, escaping,
leaching, dumping, or disposing into the environment
{including the abandonment or discarding of barrels,
containers, and other closed receptacles) of any
"toxic chemical" (i.e., any of the chemicals or chemi-
cal categories on pages 15-24).
PUBLIC ACCESS
TO REPORTS
The law requires facilities covered by Section
313 to send toxic chemical release reports both to
EPA and to the state in which the facility is located.
At EPA, the Office of Toxic Substances is responsi-
ble for receiving and processing the data. The
agency designated to receive reports in your state
is listed in the instructions for Form R.
EPA is required by law to make the data in the
reports available to the public through a computer
database. (You can claim the toxic chemical iden-
tity to be a trade secret, but you must justify the
claim to EPA. The final Trade Secret rule was pub-
lished in the Federal Register on July 29, 1988.)
The database is intended to help answer citizens'
questions about toxic chemical releases in their
community. The users of the data are also likely to
include researchers from the government or universi-
ties conducting environmental analyses. EPA ex-
pects to use the data in a variety of ways, including
targeting problem pollution areas and as a screen-
ing tool for developing standards and regulations.
11
-------
WHAT YOU CAN DO NOW
You can begin planning now to make
compliance with Section 313 as easy and inexpen-
sive as possible. The steps are as follows:
[TJ Check that you have 10 or more full-time employ-
ees (that is, if the total annual hours worked by all
employees is at least 20,000 hours).
[2J Check the SIC code list on page 9 to determine
whether your facility is covered {i.e., has an SIC
code of 20-39).
SI Check the list of toxic chemicals covered by Sec-
tion 313 (pages 15-24) to see if any are manufac-
tured, imported, processed, or otherwise used by
your facility. Your chemical supplier is required to
inform you if any of the Section 313 toxic chemi-
cals are contained in mixtures sold to you. Also,
the document "Common Synonyms for Section
313 Chemicals" can assist you in identifying toxic
chemicals.
3] Determine whether you handle any toxic chemical
on the list in an amount greater than the thresh-
olds on page 3.
ID If you meet the criteria, request copies of the re-
porting form, instructions, and any of the appropri-
ate guidance documents listed at the back of this
brochure.
SD Begin to develop the appropriate information to
report your releases and your source reduction
and recycling activities.
[7] Maintain a recordkeeping system that will help
you estimate releases for future years.
You should designate someone at your facility
to be responsible for reporting under Section 313.
That person should obtain reporting forms and in-
structions and should be aware of the reporting
deadline: July 1 of each year.
For information on how to obtain the reporting
form and instructions contact the Emergency Plan-
ning and Community Right-to-Know Information
Hotline. Additional guidance documents can be
obtained by mailing the order form on the inside
back cover or by calling one of the EPA regional
offices listed on pages 13-14.
12
-------
SECTION 313
EPA REGIONAL
CONTACTS
Region 1
Pesticides & Toxic Substances Branch
USEPA Region 1 (APT 2311)
JFK Federal Building
Boston, MA 02203
(617) 565-4502
Connecticut, Massachusetts, Maine, New Hampshire,
Rhode Island, Vermont
Region 2
Pesticides & Toxic Substances Branch
USEPA Region 2 (MS240)
Woodbridge Avenue, Building 209
Edison, NJ 08837-3679
(908) 906-6890
New Jersey, New York, Puerto Rico, Virgin Islands
Region 3
Toxics & Pesticides Branch
USEPA Region 3 (3HW42)
841 Chestnut Street
Philadelphia, PA 19107
(215) 597-1260
Delaware, Maryland, Pennsylvania, Virginia, West Virginia,
District of Columbia
Region 4
Pesticides & Toxic Substances Branch
USEPA Region 4
345 Courtland Street, NE
Atlanta, GA 30365
(404) 347-1033
Alabama, Florida, Georgia, Kentucky, Mississippi, North
Carolina, South Carolina, Tennessee
Region 5
Pesticides & Toxic Substances Branch
USEPA Region 5 (5 SPT-7)
230 South Dearborn Street
Chicago, IL 60604
(312) 353-5907
Illinios, Indiana, Michigan, Minnesota, Ohio, Wisconsin
13
-------
SECTION 313
EPA REGIONAL
CONTACTS
Region 6
Pesticides & Toxics Branch
USEPA Region 6 (6TPT)
1445 Ross Avenue
Dallas, TX 75202-2733
(214) 655-7244
Arkansas, Louisiana, New Mexico, Oklahoma, Texas
Region 7
Office of Congressional and Intergovernmental Liaison
USEPA Region 7 (CIGL)
726 Minnesota Avenue
Kansas City, KS 66101
(913) 551-7005
Iowa, Kansas, Missouri, Nebraska
Region 8
Toxic Substances Branch
USEPA Region 8 (8AT-TS)
999 18th Street, Suite 500
Denver, CO 80202-2405
(303) 293-1730
Colorado, Montana, North Dakota, South Dakota, Utah,
Wyoming
Region 9
Pesticides & Toxics Branch
USEPA Region 9 (A-4-2)
75 Hawthorne Street
San Francisco, CA 94105
(415)744-1116
Arizona, California, Hawaii, Nevada, American Samoa,
Guam, Commonwealth of the Northern Mariana Islands
Region 10
Pesticides & Toxic Substances Branch
USEPA Region 10 (AT083)
1200 Sixth Avenue
Seattle, WA 98101
(206) 553-4016
Alaska, Idaho, Oregon, Washington
14
-------
ALPHABETICAL LIST OF
SECTION 313 CHEMICALS
CAS De Minirnis
Number Chemical Name Concentration
(percent)
75-07-0 Acetaldehyde 0,1
60-35-5 Acetamide 0.1
67-64-1 Acetone 1.0
75-05-8 Acetonitrile 1.0
53-96-3 2-Acetylaminofluorene 0.1
107-02-8 Acrolein 1.0
79-06-1 Acrylamtde 0.1
79-10-7 Acrylic acid 1.0
107-13-1 Acrylonitrile 0.1
309-00-2 Aldrin [1,4:5,8-Dimethanonaphthalene, 1.0
1,2,3,4,10,10-hexachloro-1,4,4a)5l8,8a-
hexahydro-(1.alpha.,4.alpha.,4a.beta.,
5.alpha.,8.alpha.,8a.beta.)-]
107-18-6 Allyl alcohol 1.0
107-05-1 Allyl chloride 1.0
7429-90-5 Aluminum (fume or dust) 1.0
1344-28-1 Aluminum oxide (fibrous form) 0.1
117-79-3 2-Aminoanthraquinone 0.1
60-09-3 4-Aminoazobenzene 0.1
92-67-1 4-Aminobiphenyl 0.1
82-28-0 1-Amino-2-methylanthraquinone ...0.1
7664-41-7 Ammonia 1.0
6484-52-2 Ammonium nitrate (solution) 1.0
7783-20-2 Ammonium sulfate (solution) 1.0
62-53-3 Aniline 1.0
90-04-0 o-Anisidine 0.1
104-94-9 p-Anisidlne 1.0
134-29-2 o-Anisidine hydrochloride 0.1
120-12-7 Anthracene 1-0
7440-36-0 Antimony 1.0
7440-38-2 Arsenic 0.1
1332-21-4 Asbestos (friable) 0.1
7440-39-3 Barium 1.0
98-87-3 Benzal chloride 1.0
55-21-0 Benzamide 1.0
71-43-2 Benzene 0,1
92-87-5 Benzidine 0,1
98-07-7 Benzole trichloride (Benzotrichloride) . 0,1
98-88-4 Benzoyl chloride 1.0
94-36-0 Benzoyl peroxide 1.0
-------
CAS
Number
Chemical Name
De Minlmls
Concentration
(percent)
100-44-7 Benzyl chloride
7440-41-7 Beryllium
92-52-4 Biphenyl
111 -44-4 Bts(2-chloroethyl) ether
542-88-1 Bis(chloromethyl) ether
108-60-1 Bis(2-chloro-1-methylethyl) ether ..
103-23-1 Bis(2-ethylhexyl) adipate
353-59-3 Bromochlorodifluoromethane
(Halon 1211)
75-25-2 Bromoform (Tribromomethane) ....
74-83-9 Bromomethane (Methyl bromide) ...
75-63-8 Bromotrtfluoromethane (Halon 1301)
106-99-0 1,3-Butadiene
141-32-2 Butyl acrylate
71-36-3 n-Butyl alcohol
78-92-2 sec-Butyl alcohol
75-65-0 tert-Butyl alcohol
85-68-7 Butyl benzyl phthalate
106-88-7 1,2-Butylene oxide
123-72-8 Butyraldehyde
4680-78-8 C.I. Acid Green 3
569-64-2 C.I. Basic Green 4
989-38-8 C.I. Basic Red 1
1937-37-7 C.I. Direct Black 38
2602-46-2 C.I. Direct Blue 6
16071-86-6 C.I. Direct Brown 95
2832-40-8 C.I. Disperse Yellow 3
3761-53-3 C.I. Food Red 5
81-88-9 C.I. Food Red 15
3118-97-6 C.l. Solvent Orange 7
97-56-3 C.I. Solvent Yellow 3
842-07-9 C.I. Solvent Yellow 14
492-80-8 C.I. Solvent Yellow 34 (Auramine) ..
128-66-5 C.I. Vat Yellow 4
7440-43-9 Cadmium
156-62-7 Calcium cyanamide
133-06-2 Captan [1H-lsoindole-1,3(2H)-dione,
3a,4,7,7a-tetrahydro-2-
[(trichloromethyl)thio]-]
63-25-2 Carbaryl [1-Naphthalenol
methylcarbamate]
75-15-0 Carbon disulfide
56-23-5 Carbon tetrachloride
. 1.0
. 0.1
1.0
1.0
0.1
1.0
1.0
1.0
1.0
1.0
1.0
0.1
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
0.1
0.1
0.1
0.1
1.0
0.1
0.1
1.0
0.1
0.1
0.1
1.0
0.1
1.0
1.0
1.0
1.0
0.1
16
-------
CAS
Number
Chemical Name
De Minimls
Concentration
(percent)
463-58-1 Carbonyl sulfide 1.0
120-80-9 Catechol 1.0
133-90-4 Chloramben [Benzoic acid, 1.0
3-amino~2,5-dichloro-]
57-74-9 Chlordane [4,7-Methanotndan 1.0
1,2,4,5,6,7,8,8- octachloro-
2,3,3a,4,7,7a-hexahydro-]
7782-50-5 Chlorine 1.0
10049-04-4 Chlorine dioxide 1.0
79-11-8 Chloroacetic acid 1.0
532-27-4 2-Chloroacetophenone 1.0
108-90-7 Chlorobenzene 1.0
510-15-6 Chlorobenzilate [Benzeneacetic acid, 1.0
4-chloro-.alpha.-(4- chlorophenyl)-
.alpha, -hydroxy -, ethyl ester]
75-00-3 Chloroethane (Ethyl chloride) 1.0
67-66-3 Chloroform 0.1
74-87-3 Chloromethane (Methyl chloride) .... 1.0
107-30-2 Chloromethyl methyl ether 0.1
126-99-8 Chloroprene 1.0
1897-45-6 Chlorothalonil [1,3- 1.0
Benzenedtcarbonitrile, 2,4,5,6-
tetrachloro-]
7440-47-3 Chromium 0.1
7440-48-4 Cobalt 1.0
7440-50-8 Copper 1.0
8001-58-9 Creosote 0.1
120-71-8 p-Cresidine 0.1
1319-77-3 Cresol (mixed isomers) 1.0
108-39-4 m-Cresol 1.0
95-48-7 o-Cresol 1.0
106-44-5 p-Cresol 1.0
98-82-8 Cumene 1.0
80-15-9 Cumene hydroperoxide 1.0
135-20-6 Cupferron 0.1
[Benzeneamine, N-hydroxy-N-nitroso,
ammonium salt]
110-82-7 Cycfohexane 1.0
94-75-7 2,4-D [Acetic acid 1.0
(2,4-dichloro-phenoxy) -]
1163-19-5 Decabromodiphenyl oxide 1.0
2303-16-4 Diallate [Carbamothioic acid.bis 1.0
(1-methylethyl)-,
S-(2,3-dichloro-2-propenyl) ester]
17
-------
CAS
Number
Chemical Name
De Mlnlmls
Concentration
(percent)
615-05-4 2,4-Diaminoaniso!e 0.1
39156-41-7 2,4-Diaminoanisole sulfate 0,1
101-80-4 4,41-Diaminodiphenyl ether 0.1
25376-45-8 Diaminotoluene {mixed isomers) .... 0.1
95-80-7 2,4-Diaminotoluene 0.1
334-88-3 Diazomethane 1.0
132-64-9 Dibenzofuran 1.0
96-12-8 1,2-Dibromo-3-chloropropane (DBCP)0.1
106-93-4 1,2-Dibromoethane 0.1
(Ethylene dibromide)
124-73-2 Dibromotetrafluoroethane {Halon 2402) 1.0
84-74-2 Dibutyl phthalate 1.0
25321-22-6 Dichlorobenzene (mixed isomers) ... 0.1
95-50-1 1,2- Dichlorobenzene 1.0
541-73-1 1,3-Dichlorobenzene 1.0
106-46-7 1,4-Dichlorobenzene 0.1
91-94-1 3,3'-Dichlorobenzidine 0.1
75-27-4 Dichlorobromomethane 1.0
75-71-8 Dichlorodifiuoromethane (CFC-12) .. 1.0
107-06-2 1,2-Dichloroethane 0.1
{Ethylene dichloride)
540-59-0 1,2-Dichloroethylene 1.0
75-09-2 Dichloromethane (Methyiene chloride) 0.1
120-83-2 2.4-Dich!orophenol 1.0
78-87-5 1,2-Dichloropropane 1.0
78-88-6 2,3-Dichloropropene 1.0
542-75-6 1,3-Dichloropropylene 0.1
76-14-2 Dichlorotetrafluoroethane (CFC-114) . 1.0
62-73-7 Dichlorvos [Phosphoric acid, 2 1.0
dichloroethenyl dimethyl ester]
115-32-2 Dicofol [Benzenemethanol, 4-chloro- 1.0
.alpha.- 4-chlorophenyl)-
.alpha.- (trichioromethyl)-]
1464-53-5 Diepoxybutane 0.1
111 -42-2 Diethanolamtne 1.0
117-81-7 Di-(2-ethylhexyl) phthalate (DEHP) .. 0.1
84-66-2 Diethyl phthalate 1.0
64-67-5 Diethyl sulfate 0.1
119-90-4 3,3'-Dimethoxybenzidine 0.1
60-11-7 4-Dimethylaminoazobenzene 0.1
119-93-7 3,3'-Dimethylbenzidine (o-Tolidine) .0.1
79-44-7 Dimethylcarbamyl chloride 0.1
57-14-7 1,1-Dimethyl hydrazine 0.1
105-67-9 2,4-Dimethylphenol 1.0
18
-------
CAS
Number
Chemical Name
De Minimis
Concentration
(percent)
131-11-3 Dimethyl phthalate 1.0
77-78-1 Dimethyl sulfate 0.1
99-65-0 m-Dinitrobenzene 1.0
528-29-0 o-D(nitrobenzene 1.0
100-25-4 p-Dinitrobenzene 1.0
534-52-1 4,6-Dinitro-o-cresol 1.0
51-28-5 2,4-Dinitrophenol 1.0
121-14-2 2,4-Dinitrotoluene 1.0
606-20-2 2,6-Dinitrotoluene 1.0
25321-14-6 Dinitrotoluene 1.0
(mixed isomers)
117-84-0 n-Dioctyl phthalate 1.0
123-91-1 1,4-Dioxane 0.1
122-66-7 1,2-Diphenylhydrazine 0.1
(Hydrazobenzene)
106-89-8 Epichlorohydrin 0.1
110-80-5 2-Ethoxyethanol 1.0
140-88-5 Ethyl acrylate 0.1
100-41-4 Ethylbenzene 1.0
541-41-3 Ethyl chloroformate 1.0
74-85-1 Ethylene 1.0
107-21-1 Ethylene glycol 1.0
151-56-4 Ethyleneimine (Aziridine) 0.1
75-21-8 Ethylene oxide 0.1
96-45-7 Ethylene thiourea 0.1
2164-17-2 Fluometuron [Urea, N.N-dimethyl-N'- 1.0
[3- (trif luoromethyl)phenyl] -]
50-00-0 Formaldehyde 0.1
76-13-1 Freon 113 [Ethane, 1,1,2-trichloro-1,2, 1.0
2-trifluoro-]
76-44-8 Heptachlor [1,4,5,6,7,8,8-Heptachloro- 1.0
3a,4,7,7a-tetrahydro-4,7-
methano-1H - indene]
118-74-1 Hexachlorobenzene 0.1
87-68-3 Hexachloro-1,3-butadiene 1.0
77-47-4 Hexachlorocyclopentadiene 1.0
67-72-1 Hexachloroethane 1.0
1335-87-1 Hexachloronaphthalene 1.0
680-31-9 Hexamethylphosphoramide 0.1
302-01-2 Hydrazine 0.1
10034-93-2 Hydrazine sulfate 0.1
7647-01-0 Hydrochloric acid 1.0
74-90-8 Hydrogen cyanide 1.0
7664-39-3 Hydrogen fluoride 1.0
19
-------
CAS
Number
Chemical Name
De Minimls
Concentration
(percent)
123-31-9 Hydroquinone 1.0
78-84-2 Isobutyraldehyde 1.0
67-63-0 Isopropyl alcohol (manufacturing- . . 0.1
strong acid process, no supplier
notification)
80-05-7 4,4'-lsopropylidenediphenol 1.0
120-58-1 Isosafrole 1.0
7439-92-1 Lead 0.1
58-89-9 Lindane 0.1
[Cyclohexane, 1,2,3,4,5,6-hex-
achloro- ,(1.alpha.,2.alpha.,3. beta.,
4.alpha.,5.alpha.,6.beta.)-]
108-31-6 Maleic anhydride 1.0
12427-38-2 Maneb [Carbamodithioic acid, 1,2- .. 1.0
ethanediylbis-, manganese complex]
7439-96-5 Manganese 1.0
7439-97-6 Mercury 1.0
67-56-1 Methanol 1.0
72-43-5 Methoxychlor [Benzene, 1,1 '-(2,2,2- . 1.0
trichloroethylidene)bis [4-methoxy-]
109-86-4 2-Methoxyethanol 1.0
96-33-3 Methyl acrylate 1.0
1634-04-4 Methyl tert-butyl ether 1.0
101-14-4 4,4'-Methylenebis(2-chloro aniline) .. 0.1
(MBOCA)
101-61-1 4,4'-Methylenebis (N.N-dimethyl) ...0.1
benzenamine
101-68-8 Methylenebis(phenylisocyanate) (MBI) 1.0
74-95-3 Methylene bromide 1.0
101-77-9 4,4'-Methylenediani!ine 0.1
78-93-3 Methyl ethyl ketone 1.0
60-34-4 Methyl hydrazine 1.0
74-88-4 Methyl iodide 0.1
108-10-1 Methyl isobutyl ketone 1.0
624-83-9 Methyl isocyanate 1,0
80-62-6 Methyl methacrylate 1.0
90-94-8 Michler's ketone 0.1
1313-27-5 Molybdenum trioxide 1.0
76-15-3 Monochloropentafluoroethane 1.0
(CFC-115)
505-60-2 Mustard gas {Ethane, 1,1'-thiobis ... 0.1
[2-chloro-]
91-20-3 Naphthalene 1.0
134-32-7 alpha-Naphthylamine 0.1
20
-------
CAS
Number
Chemical Name
De MInimis
Concentration
(percent)
91-59-8 beta-Naphthylamine 0.1
7440-02-0 Nickel 0.1
7697-37-2 Nitric acid 1.0
139-13-9 Nitrilotriacetic acid 0.1
99-59-2 5-Nitro-o-anisidine 0.1
98-95-3 Nitrobenzene 1.0
92-93-3 4-Nitrobiphenyl 0.1
1836-75-5 Nitrofen [Benzene, 2,4-dichloro- 0.1
1 - (4-nitrophenoxy) -]
51-75-2 Nitrogen mustard [2-Chloro-N-(2- ..0.1
chtoroethyl) -N- methylethanamine]
55-63-0 Nitroglycerin 1.0
88-75-5 2-Nitrophenol 1.0
100-02-7 4-Nitrophenol 1.0
79-46-9 2-Nitropropane 0.1
156-10-5 p-Nitrosodiphenylamine 0.1
121-69-7 N,N-Dimethylaniline 1.0
924-16-3 N-Nitrosodi-n-butytamine 0.1
55-18-5 N-Nitrosodiethylamine 0.1
62-75-9 N-Nitrosodimethylamine 0.1
86-30-6 N-Nitrosodiphenylamine 1.0
621-64-7 N-Nitrosodi-n-propyiamine 0.1
4549-40-0 N-Nitrosomethylvinylamine 0.1
59-89-2 N-Nitrosomorpholine 0.1
759-73-9 N-Nitroso-N-ethyturea 0.1
684-93-5 N-Nitroso-N-methylurea 0.1
16543-55-8 N-Nitrosonornicotine 0.1
100-75-4 N-Nitrosopiperidine 0.1
2234-13-1 Octachloronaphthalene 1.0
20816-12-0 Osmium tetroxide 1-0
56-38-2 Parathion [Phosphorothioic acid, o, .. 1.0
o-diethyl-o-(4-nitrophenyl) ester]
87-86-5 Pentachlorophenol (PCP) 1.0
79-21-0 Peracetic acid 1-0
108-95-2 Phenol 1.0
106-50-3 p-Phenylenediamine 1.0
90-43-7 2-Pheny(phenol 1.0
75-44-5 Phosgene 1.0
7664-38-2 Phosphoric acid 1.0
7723-14-0 Phosphorus (yellow or white) 1.0
85-44-9 Phthalic anhydride 1.0
88-89-1 Picric acid 1.0
1336-36-3 Polychlorinaied biphenyis (PCBs) ...0.1
1120-71-4 Propane sultone 0.1
21
-------
CAS
Number
Chemical Name
De Mlnimis
Concentration
(percent)
57-57-8 beta-Propiolactone 0.1
123-38-6 Propionatdehyde 1.0
114-26-1 Propoxur [Phenol, 2- 1.0
(1-methylethoxy)-, methylcarbamate]
115-07-1 Propylene (Propane) 1.0
75-55-8 Propyleneimine 0.1
75-56-9 Propylene oxide 0.1
110-86-1 Pyridine 1.0
91-22-5 Quinoiine 1.0
106-51-4 Quinone 1.0
82-68-8 Qurntozene [Pentachloronilrobenzene] 1.0
81-07-2 Saccharin (manufacturing, no supplier 0.1
notification) [1,2- Benzisothiazol
-3(2H) -one, 1,1 -dioxide]
94-59-7 Safrole 0.1
7782-49-2 Selenium 1.0
7440-22-4 Silver 1.0
100-42-5 Styrene 0.1
96-09-3 Styrene oxide 0.1
7664-93-9 Sutfuric acid 1.0
79-34-5 1,1,2,2-Tetrachloroethane 0.1
127-18-4 Tetrachforoethylene 0.1
(Perchloroethylene)
961-11-5 Tetrachlorvinphos 1.0
[Phosphoric acid, 2-chloro-1-
(2,3,5-trichlorophenyl) ethenyl
dimethyl ester]
7440-28-0 Thallium 1.0
62-55-5 Thioacetamtde 0.1
139-65-1 4,4'-Thiodianiline 0.1
62-56-6 Thiourea 0.1
1314-20-1 Thorium dioxide 1.0
7550-45-0 Titanium tetrachloride 1.0
108-88-3 Toluene 1.0
584-84-9 Totuene-2,4-diisocyanate 0.1
91-08-7 Toluene-2,6-diisocyanate 0.1
26471-62-5 Toluenediisocyanate 0.1
(mixed isomers)
95-53-4 o-Toluidine 0.1
636-21-5 o-Toluidine hydrochloride 0.1
8001-35-2 Toxaphene 0.1
68-76-8 Triaziquone [2,5-Cyclohexadiene .... 0.1
-1,4-dione, 2,3,5-tris(1-aziridinylH
22
-------
CAS
Number
Chemical Name
De Minimis
Concentration
(percent)
52-68-6 Trichlorfon [Phosphonic acid, (2,2,2- . 1.0
trichloro-1-hydroxyethyl)-, dimethyl ester]
120-82-1 1,2,4-Trichlorobenzene 1.0
71-55-6 1,1,1-Trichloroethane 1.0
(Methyl chloroform)
79-00-5 1,1,2-Trichloroethane 1.0
79-01-6 Trichloroethylene 1.0
75-69-4 Trtchlorofluoromethane (CFC-11) ... 1.0
95-95-4 2,4,5-Trichtorophenol 1.0
88-06-2 2,4,6-Trichlorophenol 0.1
1582-09-8 Trifluralin [Benzeneamine, 2,6- 1.0
dinitro-N,N-dipropyl-4-(trif!uoromethyl)-]
95-63-6 1,2,4-Trirnethylbenzene 1.0
126-72-7 Tris(2,3-dibromopropyl) phosphate .. 0.1
51-79-6 Urethane (Ethyl carbamate) 0.1
7440-62-2 Vanadium (fume or dust) 1.0
108-05-4 Vinyl acetate 1.0
593-60-2 Vinyl bromide 0.1
75-01-4 Vinyl chloride 0.1
75-35-4 Vinylidene chloride 1.0
1330-20-7 Xylene (mixed isomers) 1.0
108-38-3 m-Xylene 1.0
95-47-6 o-Xylene 1.0
106-42-3 p-Xyiene 1.0
87-62-7 2,6-Xylidine 1.0
7440-66-6 Zinc (fume or dust) 1.0
12122-67-7 Zineb [Carbamodithioic acid, 1,2- ... 1.0
ethanediylbis-, zinc complex]
23
-------
CHEMICAL
CATEGORIES
Section 313 requires reporting on the toxic chemi-
cal categories listed below, in addition to the specific
toxic chemicals listed above.
The metal compounds listed below, unless other-
wise specified, are defined as including any unique
chemical substance that contains the named metaf (i.e.,
antimony, nickel, etc.) as part of that chemical's struc-
ture.
Toxic chemical categories are subject to the 1 per-
cent de minimis concentration unless the substance
involved meets the definition of an OSHA carcinogen in
which case the 0.1 percent de minimis concentration
applies.
Antimony Compounds
Arsenic Compounds
Barium Compounds
Beryllium Compounds
Cadmium Compounds
Chlorophenols
Chromium Compounds
Cobalt Compounds
Copper Compounds *
Cyanide Compounds - X+CN~ where X - H +
or any other group where a formal dissociation
may occur. For example KCN or Ca(CN}2
Glycol Ethers - includes mono- and di-ethers of
ethylene glycol, diethylene glycol, and triethylene
glycol. Polymers are excluded from the glycoi ether
category.
Lead Compounds
Manganese Compounds
Mercury Compounds
Nickel Compounds
Polybrqminated Biphenyls (PBBs)
Selenium Compounds
Silver Compounds
Thallium Compounds
Zinc Compounds
Three substances were deleted from the Copper Compounds
category and are not reportable beginning with calendar year 1991
(Form R reports due July 1, 1992). They are: C.I. Pigment Blue 15,
CAS No. 147-14-8; C.I. Pigment Green 7, CAS No, 1328-53-6; and
C.I. Pigment Green 36, CAS No. 14302-13-7.
24
-------
FOR MORE
INFORMATION
Write to:
Emergency Planning and Community Right-to-Know
Information Hotline
401 MSt.,SW (OS-120)
Washington, D.C. 20460
Or for regulatory and technical assistance, call:
Emergency Planning and (800) 535-0202
Community Right-to-Know or
Information Hotline, (703) 920-9877
8:30 am-7:30 pm Eastern Time
Asbestos and Small (800) 368-5888
Business Ombudsman or
Hotline (703) 557-1938
(in Washington, D.C.
and Virginia)
Other information:
• EPA is developing a series of videotapes to help ex-
plain the Emergency Planning and Community
Right-to-Know Act. For more information on the
video tapes, call the Emergency Planning and Com-
munity Right-to-Know Information Hotline.
• EPA's technical guidance on Estimating Releases
(EPA 560/4-88-002) is available from: Emergency
Planning and Community Right-to-Know Document
Distribution Center, P.O. Box 12505, Cincinnati, OH
45212.
• EPA's Comprehensive List of Chemicals Subject to
Reporting under the Act (Title III List of Lists) is avail-
able as an IBM compatible disk from: The National
Technical Information Service, 5285 Port Royal
Road, Springfield, VA 22161, (703) 487-4650. Docu-
ment Number:
PB 90-501479, $80.00.
25
-------
AVAILABLE FROM EPA
Oheck the boxes befow to receive publications
about Section 313. Remove this page, put it in an
envelope, and mail it to: Emergency Planning and
Community Rlght-to-Know Document Distribu-
tion Center, P.O. Box 12505, Cincinnati, OH
45212. (Please correct your mailing label if neces-
sary.)
For information on how to obtain the reporting
form and instructions contact the Emergency Plan-
ning and Community Right-to-Know Information
Hotline at 1-800-535-0202 or (703) 920-9877.
n TRI Magnetic Media Submission Guidance
Package (EPA 560/7-92-008)
NOTE: This document will not be available until
January 1992.
u Common Synonyms for Section 313
Chemicals (EPA 560/4-91-005)
n Comprehensive List of Chemicals Subject to
Reporting under the Act (Title III List Of Lists)
(EPA 560/4-91-011)
n Supplier Notification Requirements Brochure
(EPA 560/4-91-006)
a Estimating Releases and Waste Treatment
Efficiencies (EPA 560/4-88-002)
Industry Specific Technical Guidance Documents for
estimating releases:
a Monofilament Fiber Manufacture
(EPA 560/4-88-004a)
D Printing Operations (EPA 560/4-88-004b}
a Electrodeposition of Organic Coatings
(EPA 560/4-88-004C)
a Spray Application of Organic Coatings
(EPA 560/4-88-004d}
n Semiconductor Manufacture
(EPA 560/4-88 -004e)
a Formulating Aqueous Solutions
(EPA 560/4-88-004f)
o Electroplating Operations(EPA 560/4-88-004g)
a Textile Dyeing (EPA 560/4-88-004h)
a Presswood and Laminated Wood Products
Manufacturing (EPA 560/4-88-004J)
n Roller. Knife, and Gravure Coating Operations
(EPA 560/4-88-004])
o Paper and Paperboard Production
(EPA 560/4-88~004k)
n Leather Tanning and Finishing Processes
(EPA 560/4-88-004I)
n Wood Preserving (EPA 560/4-88-004p)
o Rubber Production and Compounding
(EPA 560/4-88-004q)
------- |