OFFICE OF ENFORCEMENT
Summary of
FINAL
Effluent Limitations Guidelines for Existing Sources
and
Standards of Performance for New Sources
NATIONAL FIELD INVESTIGATIONS CENTER - DENVER
DENVER, COLORADO
AUGUST 1974
-------
Summary
of
FINAL
Effluent Limitations Guidelines for Existing Sources
and
Standards of Performance for New Sources
for 28 Point Source Categories
Environmental Protection Agency
Office of Enforcement
National Field Investigations Center - Denver
Building 53, Box 25227, Denver Federal Center
Denver, Colorado 80225
August 1974
-------
CONTETTTS
Page
PART 405 - DAIRY PRODUCTS PROCESSING INDUSTRY 1
PART 406 - GRAIN MILLS 10
PART 407 - CANNED AND PRESERVED FRUITS AND VEGETABLE PROCESSING 12
PART 408 - CANNED AND PRESERVED SEAFOOD PROCESSING 14
PART 409 - SUGAR PROCESSING INDUSTRIES 18
PART 410 - TEXTILE INDUSTRY 22
PART 411 - CEMENT MANUFACTURING 29
PART 412 - FEEDLOTS 30
PART 413 - ELECTROPLATING 32
PART 414 - ORGANIC CHEMICALS 34
PART 415 - INORGANIC CHEMICALS 37
PART 416 - PLASTICS AND SYNTHETICS 49
PART 417 - SOAP AND DETERGENT 58
PART 418 - FERTILIZER MANUFACTURING 68
PART 419 - PETROLEUM REFINING 71
PART 420 - IRON AND STEEL MANUFACTURING 83
PART 421 - NONFERROUS METALS 88
PART 422 - PHOSPHATE MANUFACTURING 91
-------
CONTENTS
(Continued)
Page
PART 423 - STEAM ELECTRIC POWER GENERATING EQUIPMENT 93
PART 424 - FERROALLOY MANUFACTURING 98
PART 425 - LEATHER TANNING AND FINISHING TOO
PART 426 - GLASS MANUFACTURING 106
PART 427 - ASBESTOS MANUFACTURING 109
PART 428 - RUBBER PROCESSING Ill
PART 429 - TIMBER PRODUCTS 113
PART 430 - PULP, PAPER AND PAPERBOARD 116
PART 431 - BUILDERS PAPER AND BOARD 118
PART 432 - MEAT PRODUCTS 119
-------
DEFINITIONS
*BPT - Effluent limitations guidelines to be achieved no later than July 1, 1977 representing the
degree of effluent reduction attainable by the application of the best practicable control
technology currently available.
BAT - Effluent limitations guidelines to be achieved no later than July 1, 1983 representing the
degree of effluent reduction attainable by application of the best available technology
economically available.
New Sources -Effluent reduction to be achieved by New Sources through application of the best available
demonstrated control technology, processes, operating methods, or other alternatives.
*In establishing the limitations set forth for BPT, EPA took into account all information it was able to
collect, develop and solicit with respect to factors (such as age and size of plant, raw materials, manu-
facturing processes, products produced, treatment technology available, energy requirements and costs)
which can affect the industry subcategorization and effluent levels established. It is, however, possible
that data which would affect these limitations have not been available and, as a result, these limitations
should be adjusted for certain plants in this industry. An individual discharger or other interested person
may submit evidence to the Regional Administrator (or to the State, if the State has the authority to issue
NPDES permits) that factors relating to the equipment or facilities involved, the process applied, or other
such factors related to such discharger are fundamentally different from the factors considered in the
establishment of the guidelines. On the basis of such evidence or other available information, the Regional
Administrator (or the State) will make a written finding that such factors are or are not fundamentally
different for that facility compared to those specified in the Development Document. If such fundamentally
different factors are found to exist, the Regional Administrator or the State shall establish for the
discharger effluent limitations in the NPDES permit either more or less stringent than the limitations
established herein, to the extent dictated by such fundamentally different factors. Such limitations must
be approved by the Administrator of the Environmental Protection Agency. The Administrator may approve or
disapprove such limitations, specify other limitations, or initiate proceedings to revise these regulations.
iv
-------
BAT New Sources
Parameter Daily
PART
405 - DAIRY PRODUCTS FINAL
Subpart A - Receiving Stations
30 Day
REGULATIONS, PUBLISHED
Subcateqory
(a) For receiving stations receiving more than 150,000
BODS
TSS
PH
0.048 lb/100 Ib
of BOD5 input
0.071 lb/100 Ib
of 8005 input
6.0
0.019 lb/100 Ib
of BOD5 input
0.029 lb/100 Ib
of BOD5 input
- 9.0
(b) For receiving stations receiving 150,000 Ib/day or
BOD5
TSS
PH
BOD5
TSS
0.063 lb/100 Ib
of B005 input
0.094 lb/100 Ib
of BODS input
0.031 lb/100 Ib
of BODS input
0.047 lb/100 Ib
of BODS input
6.0 - 9.0
Subpart B - Fluid Products Subcategory
(a) For fluid products plants
0.338 lb/100 Ib
of BOD5 input
0.551 lb/100 Ib
of BODS input
receiving more than 250,
0.135 lb/100 Ib
of BOD5 input
0.203 lb/1000 Ib
of BOOS input
Daily
5/28/74, EFFECTIVE 5/28/74
Ib/day of milk equivalent (15,
0.010 lb/100 Ib
of BOD5 input
0.013 lb/100 Ib
of BODS input
6.0 - 9.0
less of milk equivalent (under
0.015 lb/100 Ib
of BOD5 input
0.019 lb/100 Ib
of BOD5 input
30 Day Daily
600 Ib/day or more of BODS input).
0.005 lb/100 Ib
of BODS input
0.006 lb/100 Ib
of BOD5 input
15,600 Ib/day of
0.008 lb/100 Ib
of BOD5 input
0.009 lb/100 Ib
of BODS input
6.0 - 9.0
000 Ib/day of milk equivalent (more than 25,900
0.074 lb/100 Ib
of BODS input
0.093 lb/100 Ib
of BODS input
0.037 lb/100 Ib
of BODS input
0.046 lb/100 Ib
of BOD5 input
0.010 lb/100 Ib
of BOD5 input
0.013 lb/100 Ib
of BOD5 input
6.0 -
BODS input).
0.010 lb/100 Ib
of BODS input
0.013 lb/100 Ib
of BODS input
6.0 -
Ib/day of BOD5 input).
0.074 lb/100 Ib
of BOD5 input
0.093 lb/100 Ib
of BODS input
30 Day
0.005 lb/100 Ib
of BOD5 input
0.006 lb/100 Ib
of BODS input
9.0
0.005 lb/100 Ib
of BODS input
0.006 lb/100 Ib
of BODS input
9.0
0.037 lb/100 Ib
of BODS input
0-046 lb/100 Ib
of BODS input
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
-------
*BPT BAT New Sources
Parameter
Daily
PART 405 - DAIRY PRODUCTS (Continued)
Subpart
(b) For
BOD5
TSS
PH
Subpart
(a) For
BODS
TSS
PH
(b) For
BOOS
TSS
30 Day
FINAL REGULATIONS,
B - Fluid Products Subcategory (Continued)
fluid products plants receiving 250,000 Ib/day
0.450 lb/100 15
of BODS input
0.675 lb/100 Ib
of BODS input
6.0 -
0.225 lb/100 Ib
of BOD5 input
0.338 lb/100 Ib
of BODS input
9.0
Daily
PUBLISHED 5/28/74, EFFECTIVE
30 Day
5/28/74
or less of milk equivalent (less than 25,900 Ib/day of
0.110 lb/100 Ib
of BODS input
0.138 lb/100 Ib
of BODS input
6.0 - 9.
0.055 lb/100 Ib
of BODS input
0.069 lb/100 Ib
of BOD5 input
0
gaily.
BODS input).
0.074 lb/100 Ib
of B005 input
0.093 lb/100 Ib
of BODS input
6.0 -
30 Day
0.037 lb/100 Ib
of BOD5 input
0.046 lb/100 Ib
of BOD5 input
9.0
C - Cultured Products Subcateqory
cultured products plants
0.338 lb/100 Ib
of BODS input
0.506 lb/100 Ib
of BODS input
6.0 -
cultured products plants
0.450 lb/100 Ib
of BODS input
0.675 lb/100 Ib
of BODS input
receiving more than 60
0.135 lb/100 Ib
of BODS input
0.203 lb/100 Ib
of BODS input
9.0
,000 Ib/day of milk equivalent (more than 6,200 Ib/day
0.074 lb/100 Ib
of BODS input
0.093 lb/100 Ib
of BODS input
6.0 - 9.
receiving 60,000 Ib/day or less of milk equivalent
0.225 lb/100 Ib
of BODS input
0.338 lb/100 Ib
of BODS input
0.110 lb/100 Ib
of BODS input
0.138 lb/100 Ib
of BODS input
0.037 lb/100 Ib
of BODS input
0.046 lb/100 Ib
of BODS input
0
of BODS input).
0.074 lb/100 Ib
of BODS input
0.093 lb/100 Ib
of BOD5 input
6.0 -
0.037 lb/100 Ib
of BODS input
0.046 lb/100 Ib
of BOD5 input
9.0
(less than 6,200 Ib/day of BOD5 input).
0.055 lb/100 Ib
of BODS input
0.069 lb/100 Ib
of BOD5 input
0.074 lb/100 Ib
of BODS input
0.093 lb/100 Ib
of BODS input
0.037 lb/100 Ib
of BODS input
0.046 lb/100 Ib
of BODS input
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
- 2 -
-------
*BPT
BAT
New Sources
Parameter Daily 30 Day Daily
PART
405 - DAIRY PRODUCTS (Continued) FINAL REGULATIONS, PUBLISHED 5/28/74, EFFECTIVE
Subpart D - Butter Subcateqory
30 Day
5/28/74
Daily
30 Day
(a) For plants processing more than 175,000 Ib/day of milk equivalent (more than 18,180 Ib/day of BODS input).
BODS
TSS
PH
6005
TSS
pH
BODS
TSS
0.138 lb/100 Ib 0.055 lb/100 Ib 0.016 lb/100 Ib
of BOD5 input of BOD5 input of BOD5 input
0.206 lb/100 Ib 0.083 lb/100 Ib .020 lb/100 Ib
of BOD5 input of BODS input of BODS input
6.0 - 9.0 6.0 - 9.0
(b) For plants processing 175,000 Ib/day or less of milk equivalent (less than 18,180
0.183 lb/100 Ib 0.091 lb/100 Ib 0.025 lb/100 Ib
of BODS input of BODS input of BODS input
0.274 lb/100 Ib 0.137 lb/100 Ib 0.031 lb/100 Ib
of BOD5 input of BOD5 input of BOD5 input
6.0 - 9.0 6.0 - 9.0
Subpart E - Cottage Cheese and Cultured Cream Cheese Subcategory
(a) For plants processing more than 25,000 Ib/day of milk equivalent (more than 2,600
0.670 lb/100 Ib 0.268 lb/100 Ib 0.148 lb/100 Ib
of BODS input of BODS input of BODS input
1.005 lb/100 Ib 0.402 lb/100 Ib 0.185 lb/100 Ib
of BOD5 input of BOD5 input of BODS input
0.008 lb/100 Ib
of BOD5 input
.010 lb/100 Ib
of BOD5 input
Ib/day of BODS input).
0.013 lb/100 Ib
of BODS input
0.016 lb/100 Ib
of BOD5 input
Ib/day of BOD5 input).
0.074 lb/100 Ib
of BOD5 input
0.093 lb/100 Ib
of BODS input
0.016 lb/100 Ib
of BOD5 input
0.020 lb/100 Ib
of BODS input
6.0 -
0.016 lb/100 Ib
of BODS input
0.020 lb/100 Ib
of BODS input
6.0 -
0.148 lb/100 Ib
of BOD5 input
0.185 lb/100 Ib
of BODS input
0.008 lb/100 Ib
of BOD5 input
0.010 lb/100 Ib
of BOD5 input
9.0
0.008 1b/lOO Ib
of BOD5 input
0.010 lb/100 Ib
of BOD5 input
9.0
0.074 lb/100 Ib
of BOD5 input
0.093 lb/100 Ib
of BOD5 input
6.0 - 9.0
6.0 - 9.0
6.0 - 9.0
- 3 -
-------
*BPT
BAT
Parameter
Dail>
Da ill
New Sources
30 Dav
PART
BODS
TSS
PH
BOD5
TSS
PH
405 - DAIRY PRODUCTS (Continued) FINAL REGULATIONS, PUBLISHED 5/28/74, EFFECTIVE
Subpart E - Cottage Cheese and Cultured Cream Cheese Subcategory_ (Continued)
(b) For plants processing 25,000 Ib/day or less of milk equivalent (less than 2,600
0.893 lb/100 Ib 0.446 lb/100 Ib 0.223 lb/100 Ib
of BOD5 input of BOD5 input of BODS input
1.339 lb/100 Ib 0.669 lb/100 Ib 0.278 lb/100 Ib
of BODS input of BODS input of BODS input
6.0 - 9.0 6.0 - 9.
Subpart F - Natural and Processed Cheese Subcategory
(a) For plants processing more than 100,000 Ib/day of milk equivalent (more than 10,
0.073 lb/100 Ib 0.029 lb/100 Ib 0-016 lb/100 Ib
of BODS input of BODS input of BODS input
0.109 lb/100 Ib 0.044 lb/100 Ib 0.020 lb/100 Ib
of BODS input of BODS input of BODS input
6.0 - 9.0 6.0 - 9.
5/28/74
Ib/day of BODS input).
0.111 lb/100 Ib
of BODS input
0.139 lb/100 Ib
of BODS input
0
390 Ib/day of BODS input).
0.008 lb/100 Ib
of BODS input
0.010 lb/100 Ib
of BODS input
0
0.148 lb/100 Ib
of BOD5 input
0.185 lb/100 Ib
of BODS input
6.0 -
0.016 lb/100 Ib
of BODS input
0.020 lb/100 Ib
of BOOS input
6.0 -
0.074 lb/100 Ib
of BODS input
0.093 lb/100 Ib
of BODS input
9.0
0.008 lb/100 Ib
of BOD5 input
0.010 lb/100 Ib
of BOOS input
9.0
(b) For plants processing 100,000 Ib/day or less of milk equivalent (less than 10,390 Ib/day of BOD5 input).
BOD5
TSS
0.098 lb/100 Ib 0.049 lb/100 Ib 0.025 lb/100 Ib
of BODS input of BODS input of BODS input
0.146 lb/100 Ib 0.073 lb/100 Ib 0.031 lb/100 Ib
of 80D5 input of BODS input of BODS input
0.013 lb/100 Ib
of BODS input
0.016 lb/100 Ib
of BODS input
0.016 lb/100 Ib
of BODS input
0.020 lb/100 Ib
of BODS input
0.008 lb/100 Ib
of BOD5 input
0.010 lb/100 Ib
of BODS input
PH
6.0 - 9.0
6.0 - 9.0
6.0 - 9.0
- 4 -
-------
*BPT BAT Mew Sources
Parameter Daily 30 Day Daily 30 Day Daily 30 Day
PART 405 - DAIRY PRODUCTS (Continued) FINAL REGULATIONS, PUBLISHED 5/28/74, EFFECTIVE 5/28/74
Subpart G - Fluid Mix for Ice Cream and Other Frozen Desserts Subcetegory
(a) For plants with a dairy products input of more than 85,000 Ib/day of milk equivalent (more than 8,830 Ib/day of BOD5 input).
BODS 0.220 lb/100 Ib 0.088 lb/100 Ib 0.048 lb/100 Ib 0.024 lb/100 Ib 0.048 lb/100 Ib 0.024 lb/100 Ib
of 8005 input of BOD5 input of BOD5 input of BOD5 input of BODS input of BOD5 input .
TSS 0.264 lb/100 Ib 0.132 lb/100 Ib 0.060 lb/100 Ib 0.030 lb/100 Ib 0.060 lb/100 Ib 0.030 lb/100 Ib
of BOD5 input of BOD5 input of BOD5 input of BODS input of BOD5 input of BODS input
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(b) For plants with a dairy products input of 85,000 Ib/day or less of milk equivalent (less than 8,830 Ib/day of BOD5 input).
BODS
TSS
pH
0.293 lb/100 Ib
of BODS input
0.439 lb/100 Ib
of BOD5 input
6.0 - 9.0
0.146 lb/100 Ib
of BOD5 input
0.219 lb/100 Ib
of BODS input
Subpart H - Ice Cream, Frozen Desserts, Novelties and Other
BODS
TSS
pH
(a) For plants with a dairy products
0.460 lb/100 Ib
of BOD5 input
.690 lb/100 Ib
of BOOS input
6.0 - 9.
input of more than 85,
0.184 lb/100 Ib
of BODS input
.276 lb/100 Ib
of BODS input
.0
0.073 lb/100 Ib
of BODS input
0.091 lb/100 Ib
of BODS input
6.
0.036 lb/100 Ib
of BODS input
0.45 lb/100 Ib
of BOD5 input
.0 - 9.0
0.048 lb/100 Ib
of BODS input
0.060 lb/100 Ib
of BODS input
6.0 -
0.024 lb/100 Ib
of BODS input
0.030 lb/100 Ib
of BODS input
9.0
Dairy Desserts Subcateqory
000 Ib/day of milk
0.094 lb/100 Ib
of BOD5 input
.118 lb/100 Ib
of BOD5 input
6,
equivalent (more than 8,830
0.047 lb/100 Ib
of BODS input
.059 lb/100 Ib
of BODS input
.0 - 9.0
Ib/day of BODS input).
0.094 lb/100 Ib
of BODS input
.118 lb/100 Ib
of BODS input
6.0 -
0.047 lb/100 Ib
of BODS input
.059 lb/100 Ib
of BODS input
9.0
- 5 -
-------
*BPT
BAT
New Sources
Parameter Daily 30 Day_ Daily 30 Day
PART
BOD5
TSS
pH
BODS
TSS
PH
BODS
TSS
405 - DAIRY PRODUCTS (Continued) FINAL REGULATIONS, PUBLISHED 5/28/74, EFFECTIVE 5/28/74
Subpart H - Ice Cream, Frozen Desserts, Novelties and Other Dairy Desserts Subcateqory (Continued)
(b) For plants with a dairy products input of 85,000 Ib/day or less of milk equivalent (less than 8,830 Ib/day
0.613 lb/100 lb 0.306 lb/100 Ib 0.140 lb/100 Ib 0.070 lb/100 Ib
of BOD5 input of BOD5 input of BOD5 input of BOD5 input
.919 lb/100 Ib .459 lb/100 Ib .175 lb/100 Ib .088 lb/100 lb
of BOD5 input of BOD5 input of BODS input of BOD5 input
6.0 - 9.0 6.0 - 9.0
Subpart I - Condensed Milk Subcateqory
(a) For plants condensing more than 100,000 Ib/day of milk equivalent (more than 10,390 Ib/day of BODS input).
0.345 lb/100 lb 0.138 lb/100 Ib 0.076 lb/100 lb 0.038 lb/100 lb
of BOD5 input of BODS input of BOD5 input of BOD5 input
.518 lb/100 lb .207 lb/100 lb .095 lb/100 Ib .048 lb/100 lb
of BOD5 input of BOD5 input of BOD5 input of BOD5 input
6.0 - 9.0 6.0 - 9.0
(b) For plants condensing 100,000 Ib/day or less of milk equivalent (less than 10,390 Ib/day of BOD5 input).
0.460 lb/100 lb 0.184 lb/100 lb 0.115 lb/100 Ib 0.058 lb/100 lb
of BOD5 input of BOD5 input of BODS input of BOD5 input
.690 lb/100 Ib .276 lb/100 Ib .144 lb/100 Ib .072 lb/100 Ib
of BOD5 input of BOD5 input of BOD5 input of BODS input
Daily
of BOD5 input).
0.094 lb/100 lb
of BOD5 input
.118 lb/100 lb
of BODS input
6.0 -
0.076 lb/100 lb
of BODS input
.095 lb/100 lb
of BODS input
6.0 -
0.076 lb/100 lb
of BOD5 input
.095 lb/100 lb
of BOD5 input
30 Day
0.047 lb/100 lb
of BODS input
.059 lb/100 lb
of BODS input
9.0
0.038 lb/100 Ib
of BODS input
.048 lb/100 lb
of BODS input
9.0
0.038 lb/100 lb
of BOD5 input
.048 lb/100 lb
of BODS input
6.0 - 9.0
6.0 - 9.0
6.0 - 9.0
- 6 -
-------
*BPT BAT New Sources
Parameter Dally 30 Day Daily 30 Day Daily 30_Day
PART 405 - DAIRY PRODUCTS (Continued) FINAL REGULATIONS, PUBLISHED 5/28/74. EFFECTIVE 5/28/74
Subpart I - Condensed Milk Subcategory (Continued)
(c) For plants in the size range covered by
(b) once-through barometric condenser
water may be discharged untreated if
the composite net entrainment is below
15 mg/1 of BODS for any one day and
below 10 mg/1 of BOD5 as the average
for thirty consecutive days.
Subpart J - Dry Milk Subcategory
(a) For milk drying plants with an input equivalent to more than 145,000 Ib/day of milk equivalent (more than 15,070 Ib/day of BOD5 input).
BODS 0.163 lb/100 Ib 0.065 lb/100 Ib 0.036 lb/100 Ib 0.018 lb/100 Ib 0.036 lb/100 Ib 0.018 1b/100 1b
of BODS input of BODS input of B005 input of BOD5 input of BOOS input of B005 input
TSS .244 lb/100 Ib .098 lb/100 Ib .045 lb/100 Ib .023 lb/100 Ib .045 lb/100 Ib .023 lb/100 Ib
of BOD5 input of BOD5 input of BOD5 input of BOD5 input of BOD5 input of BOD5 input
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(b) For milk drying plants with an input equivalent to 145,000 Ib/day or less of milk equivalent (less than 15,070 Ib/day of BOD5 input).
BOD5 0.218 lb/100 Ib 0.109 lb/100 Ib 0.055 lb/100 Ib 0.028 lb/100 Ib 0.036 lb/100 Ib 0.018 lb/100 Ib
of BOD5 input of BOD5 input of BOD5 input of BOD5 input of B005 input of BOD5 input
TSS .328 lb/100 Ib .164 lb/100 Ib .069 lb/100 Ib .034 lb/100 Ib ,045 lb/100 Ib .023 1b/lOO Ib
of B005 input of 6005 input of BOD5 input of BOD5 input of B005 input of B005 input
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
-------
*BPT BAT New Sources
Parameter Daily 30 Day Dally 30 Day Daily 30 Day
PART 405 - DAIRY PRODUCTS (Continued) FINAL REGULATIONS, PUBLISHED 5/28/74. EFFECTIVE 5/28/74
Subpart K - Condensed Whey Subcategory
(a) For whey condensing plants with over 300,000 Ib/day of fluid raw whey input (over 20,700 Ib/day of solids or 14,160 Ib/day of BODS input).
BOD5 0.100 lb/100 Ib 0.040 lb/100 Ib 0.022 lb/100 Ib 0.011 lb/100 Ib 0.022 lb/100 Ib 0.011 lb/100 Ib
of BODS input of BOD5 input of BOD5 input ofBDDS input of BODS input of BODS input
TSS .150 lb/100 Ib .060 lb/100 Ib .028 lb/100 Ib .014 lb/100 Ib .028 lb/100 Ib .014 lb/100 Ib
of BOD5 input of BODS input of BOD5 input of BOD5 input of BODS input of BOD5 input
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(b) For whey condensing plants with 300,000 Ib/day or less of raw fluid whey input (less than 20,700 Ib/day of solids or 14,160 Ib/day of BODS input).
BODS 0.130 1b/lOO Ib 0.065 lb/100 Ib 0.033 lb/100 Ib 0.016 lb/100 Ib 0.022 lb/100 Ib 0.011 lb/100 Ib
of BODS input of BODS input of BODS input of BODS input of BODS input of BODS input
TSS .195 lb/100 Ib .098 lb/100 Ib .041 lb/100 Ib .020 lb/100 Ib .028 lb/100 Ib .014 lb/100 Ib
of BODS input of BODS input of BODS input of BODS input of BODS input of BODS input
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(c) For plants in the size range covered
in (b) once-through barometric condenser
water may be discharged untreated if the
composite net entrainment is below 15 mg/1
of BODS for any one day and below 10 mg/1
of BODS as the average for thirty
consecutive days.
- 8 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Daily 30 Day Daily 30 Day
PART 405 - DAIRY PRODUCTS (Continued) FINAL REGULATIONS. PUBLISHED 5/28/74. EFFECTIVE 5/28/74
Subpart L - Dry Whey Subcateqory
(a) For whey drying plants with an input equivalent to more than 57,000 Ib/day of 40 percent solids whey (22,800 Ib/day of solids or 15,620 Ib/day
of 8005 input).
BODS C.100 lb/100 Ib 0.040 lb/100 lb 0.022 1b/100 Ib 0.011 lb/100 Ib 0.022 lb/100 Ib 0.011 lb/100 Ib
of BOD5 input of BODS input of BODS input of BODS input of BODS input of BOD5 input
TSS .150 lb/100 Ib .060 lb/100 Ib .028 lb/100 lb .014 lb/100 Ib .028 lb/100 Ib .014 lb/100 lb
of BOD5 input of BODS input of BODS input of BODS input of BODS input of BODS input
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(b) For whey drying plants with an input equivalent to 57,000 Ib/day or less of 40 percent solids whey (under 22,800 Ib/day solids or 15,620 Ib/day
of BOD5 input).
BOD5 0.130 lb/100 lb 0.065 lb/100 lb 0.033 lb/100 lb 0.016 lb/100 lb 0.022 lb/100 lb 0.011 lb/100 lb
of BODS input of BODS input of BOD5 input of BOD5 input of BOD5 input of BOD5 input
TSS .195 lb/100 lb .098 lb/100 lb .041 lb/100 lb .020 lb/100 lb .028 Tb/100 lb .014 lb/100 lb
of BODS input of BODS input of BOOB input of BOOS input of BODS input of BOD5 input
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
- 9 -
-------
*BPT
Parameter Daily 30 Day Daily
PART 406 - GRAIN MILLS FINAL REGULATIONS, PUBLISHED 3/20/74, EFFECTIVE 5/20/74
BAT
New Sources
30 Dav
Subpart A - Corn Wet Milling Subcateqory
BOD5
TSS
pH 6.0 - 9.0
Sjjbpart B - Corn Dry Milling Subcateqory
BODS
TSS
pH 6.0 - 9.0
Subgart C - Normal Wheat Flour Milling Subcateqory
There shall be no discharge of process
waste water pollutants to navigable
waters.
150 lb/1000 std bu
corn
150 lb/1000 std bu
corn
12.0 lb/1000 std bu
corn
10.5 lb/1000 std bu
corn
50 lb/1000 std bu
corn
50 lb/1000 std bu
corn
4.0 lb/1000 std bu
corn
3.5 lb/1000 Std bu
corn
Subpart P - Bulgur Wheat Flour Milling Subcategory
BODS
TSS
pH
1.50 lb/1000 std bu
corn
0.50 lb/1000 std bu
corn
1.50 lb/1000 std bu
corn
.50 lb/1000 std bu
corn
6.0 - 9.0
Subpart E - Norrcal Rice Milling Subcategory
There shall be no discharge of process
waste water pollutants to navigable
waters.
60 lb/1000 std bu
corn
30 lb/1000 std bu
corn
20 lb/1000 std bu
corn
10 lb/1000 std bu
corn
6.0 - 9.0
6.0 lb/1000 std bu
corn
3.0 lb/1000 std bu
corn
6.0 - 9.0
2.0 lb/1000 std bu
corn
1.0 lb/1000 std bu
corn
There shall be no discharge of process
waste water pollutants to navigable
waters.
0.90 lb/1000 std bu
corn
0.30 lb/1000 std bu
corn
.60 lb/1000 std bu .20 lb/1000 std bu
corn corn
6.0 - 9.0
There shall be no discharge of process
waste water pollutants to navigable
waters.
Dail\
30 Dav
60 lb/1000 std bu
corn
30 lb/1000 std bu
corn
20 lb/1000 std bu
corn
10 lb/1000 std bu
corn
6.0 - 9.0
6.0 lb/1000 std bu
corn
3.0 lb/1000 std bu
corn
2-0 lb/1000 std bu
corn
1.0 lb/1000 std bu
corn
6.0 - 9.0
There shall be no discharge of process
waste water pollutants to navigable
waters.
0.90 lb/1000 std bu
corn
0.30 lb/1000 stdbu
corn
.60 lb/1000 std bu .20 lb/1000 stdbu
corn corn
6.0 - 9.0
There shall be no discharge of process
waste water pollutants to navigable
waters.
- 10 -
-------
*BP_T BAT New Sources
Parameter Daily 30 Day Dally lOJJaj/ Daily 30 Day
PART 406 - GRAIN MILLS (Continued) FINAL REGULATIONS. PUBLISHED 3/20/74, EFFECTIVE 5/20/74
Subpart F - Parboiled Rice Processing Subcategory
BODS 0.042 lb/100 wt rice 0.014 lb/100 wt rjce 0.021 lb/100 wt rice 0.007 lb/100 wt rice 0.021 lb/100 wt rice 0.007 lb/100 wt rice
TSS .024 lb/100 wt rice .008 lb/100 wt rice .009 lb/100 wt rice -003 lb/100 wt rice .009 lb/100 wt rice .003 lb/100 wtrice
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
- 11 -
-------
*BPT
Parameter
Daih
30 Da\
Daih
BAT
PART 407 - CANNED AND PRESERVED FRUITS AND VEGETABLES
Subpart A - Apple Juice Subcategcry
BOD5 0.60 lb/1000 Ib 0.30 lb/1000 Ib
TSS .80 lb/1000 Ib .40 lb/1000 Ib
pH 6.0 - 9.0
Fecal Coliform
Subpart B - Apple Products Subcategory
BOD5 1.10 lb/1000 Ib 0.55 lb/1000 Ib
TSS 1.40 lb/1000 Ib .70 lb/1000 Ib
pH 6.0 - 9.0
Fecal Coliform
Subpart C - Citrus^ Products Subcategory
BOD5 0.80 lb/1000 Ib 0.40 lb/1000 Ib
TSS 1.70 lb/1000 Ib 0.85 lb/1000 Ib
pH 6.0 - 9.0
Fecal Coliform
Subpart D - Frozen Potato Products Subcategory
BOD5 2.80 lb/1000 Ib 1.40 lb/1000 Ib
TSS 2.80 lb/1000 Ib 1.40 1b/lOOO Ib
PH 6.0 - 9.0
Fecal Coliform
30 Dav
New Sources
Daih
30 Dav
FINAL REGULATIONS, PUBLISHED 3/21/74, EFFECTIVE 5/20/74
(All references to lb/1000 Ib are to 1000 Ib of raw material)
0.20 lb/1000 Ib 0.10 lb/1000 Ib
.20 lb/1000 Ib .10 lb/1000 Ib
6.0 - 9.0
Max. at any time 400 counts/100 ml
0.20 lb/1000 Ib 0.10 lb/1000 Ib
.20 lb/1000 Ib .10 lb/1000 Ib
6.0 - 9.0
Max. at any time 400 counts/100 ml
0.14 lb/1000 Ib 0.07 lb/1000 Ib
.20 lb/1000 Ib .10 lb/1000 Ib
6.0 - 9.0
Max. at any time 400 counts/100 ml
0.34 lb/1000 Ib 0.17 lb/1000 Ib
1.10 lb/1000 Ib .55 lb/1000 Ib
6.0 - 9.0
Max. at any time 400 counts/100 ml
0.10 lb/1000 Ib
.10 lb/1000 Ib
0.20 lb/1000 Ib
.20 lb/1000 Ib
6.0 - 9.0
Max. at any time 400 counts/100 ml
0.10 lb/1000 Ib
.10 lb/1000 Ib
0.20 lb/1000 Ib
.20 lb/1000 Ib
6.0 - 9.0
Max. at any time 400 counts/100 ml
0.07 lb/1000 Ib
.10 lb/1000 Ib
0.14 lb/1000 Ib
.20 lb/1000 Ib
6.0 - 9.0
Max. at any time 400 counts/100 ml
0.17 lb/1000 Ib
.55 lb/1000 Ib
0.34 lb/1000 Ib
1.10 lb/1000 Ib
6.0 - 9.0
Max. at any time 400 counts/100 ml
- 1? -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Daily, 30_Day Daily 30 Day
PART 407 - CANNED AND PRESERVED FRUITS AND VEGETABLES FINAL REGULATIONS, PUBLISHED 3/21/74, EFFECTIVE 5/20/74
Subpart E - Dehydrated Potato Products Subc_ateqory_
BODS 2.40 lb/1000 Ib 1.20 lb/1000 Ib 0.34 lb/1000 Ib 0.17 lb/1000 Ib 0.34 lb/1000 Ib 0.17 lb/1000 Ib
TSS 2.80 lb/1000 Ib 1.40 lb/1000 Ib 1.10 lb/1000 Ib .55 lb/1000 Ib 1.10 lb/1000 Ib .55 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
Fecal Coliform Max. at any time 400 counts/100 ml Max. at any time 400 counts/100 ml
- 13 -
-------
*BPT
Parameter
Dail\
BAT
30 Dav
New Sources
Daily 30 Day Daily 30 Dav
PART 408 - CANNED AND PRESERVED SEAFOOD FINAL REGULATIONS, PUBLISHED 6/26/74, EFFECTIVE 6/26/74 (All references to lb/1000 Ib are to 1000 Ib of seafood
Subpart A
BOD5
TSS
Oil & Grease
PH
Subpart B
BODS
TSS
Oil 8 Grease
PH
Subpart C
BODS
TSS
Oil 8 Grease
- Farm Raised Catfish Processing Subcategory
28 lb/1000 Ib
10 lb/1000 16
6.0 - 9,
9.2 lb/1000 Ib
3.4 lb/1000 Ib
.0
4.6 lb/1000 Ib
11 lb/1000 Ib
0.90 lb/1000 Ib
6.0 - 9.0
2.3 lb/1000 Ib
5.7 lb/1000 Ib
0.45 lb/1000 Ib
4.6 lb/1000 Ib
11 lb/1000 Ib
0.90 lb/1000 Ib
6.0
2.3 lb/1000 Ib
5.7 lb/1000 Ib
0.45 lb/1000 Ib
- 9.0
- Conventional Blue Crab Processing Subcateqory
2.2 lb/1000 Ib
0.60 lb/1000 Ib
6.0 -
- Mechanized Blue Crab
36 lb/1000 Ib
13 lb/1000 Ib
0.74 lb/1000 Ib
0.20 lb/1000 Ib
9.0
Processing Subcategory
12.0 lb/1000 Ib
4.2 lb/1000 Ib
0.30 lb/1000 Ib
0.90 lb/1000 Ib
0.13 lb/1000 Ib
6.0 - 9.0
5.0 lb/1000 Ib
13 lb/1000 Ib
2.6 lb/1000 Ib
0.15 lb/1000 Ib
0.45 lb/1000 Ib
0.065 lb/1000 Ib
2.5 lb/1000 Ib
6.3 lb/1000 Ib
1.3 lb/1000 Ib
0.30 lb/1000 Ib
0.90 lb/1000 Ib
0.13 lb/1000 Ib
6.0
5.0 lb/1000 Ib
13 lb/1000 Ib
2.6 lb/1000 Ib
0.15 lb/1000 Ib
0.45 lb/1000 Ib
0.065 lb/1000 Ib
- 9.0
2.5 lb/1000 Ib
6.3 lb/1000 Ib
1.3 lb/1000 Ib
pH 6.0 - 9.0
6.0 - 9.0
6.0 - 9.0
- 14 -
-------
Parameter
*BPT BAT
Daily 30 Day Daily 30 Day_
FINAL REGULATIONS, PUBLISHED 6/26/74, EFFECTIVE 6/26/74
New Sources
PART 408 - CANNED AND PRESERVED SEAFOOD (Continued)
Subpart D - Non-Remote Alaskan Crab Meat__Pn)cessing Subcategory
BODS
TSS
Oil & Grease
PH
19 15/1000 Ib 6.2 lb/1000 Ib
1.8 ib/1000 Ib 0.01 lb/1000 Ib
6.0 - 9.0
5.0 lb/1000 Ib
1.3 lb/1000 Ib
0.21 lb/1000 Ib
2.0 lb/1000 Ib
0.53 lb/1000 Ib
0.082 lb/1000 Ib
Subpart E - Remote Alaskan Crab Meat Processing Subcategory
TSS
Oil & Grease
pH
No pollutants may be discharged which
exceed 1.27 cm (0.5 inch) in any
dimension.
6.0 - 9.0
16 lb/1000 Ib 5.3 lb/1000 Ib
1.6 lb/1000 Ib 0.52 lb/1000 Ib
6.0 - 9.0
Subpart F - Non-Remote Alaskan Whole Crab and Crab Section Processing Subcategory
BOD5 3.3 lb/1000 Ib
TSS 12 lb/1000 Ib 3.9 lb/1000 Ib 0.83 lb/1000 Ib
Oil & Grease 1.3 lb/1000 Ib 0.42 lb/1000 Ib 0.12 lb/1000 Ib
1.3 lb/1000 Ib
0.33 lb/1000 Ib
0.048 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0
Subpart G - Remote Alaskan Whole Crab and Crab Section Processing Subcategory
TSS No pollutants may be discharged which 9,9 lb/1000 Ib 3.3 lb/1000 Ib
exceed 1.27 cm (0.5 inch) in any
Oil & Grease dimension. 1.1 lb/1000 Ib 0.36 lb/1000 Ib
pH 6.0 - 9.0
Daili
30 Dav
16 lb/1000 Ib 5.3 lb/1000 Ib
1.6 lb/1000 Ib 0.52 lb/1000 Ib
6.0 - 9.0
16 lb/1000 Ib 5.3 lb/1000 Ib
1.6 lb/1000 Ib 0.52 lb/1000 Ib
6.0 - 9.0
9.9 lb/1000 Ib 3.3 lb/1000 Ib
1.1 lb/1000 Ib 0.36 lb/1000 Ib
6.0 - 9.0
9.9 lb/1000 Ib 3.3 lb/1000 Ib
1.1 lb/1000 Ib 0.36 lb/1000 Ib
6.0 - 9.0
- 15 -
-------
*BPT
BAT
Parameter Daily 30 Day PjLLb!. 30 Day
PART 408 - CANNED AND PRESERVED SEAFOOD (Continued) FINAL REGULATIONS, PUBLISHED 6/26/74, EFFECTIVE 6/26/74
Subpart_H - Dungeness and Tanner Crab Processing in the Contiguous States Subpajtegory
6005 4.3 lb/1000 Ib 1.7 lb/1000 Ib
TSS 8.1 lb/1000 Ib 2.7 lb/1000 Ib 0.58 lb/1000 Ib 0.23 lb/1000 Ib
Oil & Grease 1.8 lb/1000 Ib 0.61 lb/1000 Ib 0.18 lb/1000 Ib 0.07 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0
Subpart I - Non-Remote Alaskan Shrimp Processing Subcategory
New Sources
8005
TSS
Oil & Grease
PH
Subpart J
320 lb/1000 Ib
51 lb/1000 Ib
- Remote Alaskun
210 lb/1000 Ib
V lb/1000 Ib
6.0 - 9.0
Shrimp Processing Subcategory
70 lb/1000 Ib
45 lb/1000 Ib
3.8 lb/1000 Ib
6.0 - 9.0
28 lb/1000 Ib
18 lb/1000 Ib
1.5 lb/1000 Ib
TSS
Oil & Grease
PH
No pollutants may be discharged which
exceed 1.27 cm (0.5 inch) in any
d imension.
270 lb/1000 Ib 180 lb/1000 Ib
45 lb/1000 Ib 15 lb/1000 Ib
6.0 - 9.0
Subpart K - Northern Shrimp Processing in the Contiguous States Subcateqory
BOD5 68 lb/1000 Ib 27.0 lb/1000 Ib
TSS 160 lb/1000 Ib 54 lb/1000 Ib 12 lb/1000 Ib 4.9 lb/1000 Ib
Oil & Grease 126 lb/1000 Ib 42 lb/1000 Ib 9.5 lb/1000 Ib 3.8 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0
Dailj
30 Daj
10 Ib/lOCO Ib
1.7 lb/1000 Ib
0.25 lb/1000 Ib
4.1 lb/1000 Ib
0.69 lb/1000 Ib
0.10 lb/1000 1b'
6.0 - 9.0
270 lb/1000 Ib 180 lb/1000 Ib
45 lb/1000 Ib 15 lb/1000 Ib
6.0 - 9.0
270 lb/1000 Ib 180 lb/1000 Ib
45 lb/1000 Ib 15 lb/1000 Ib
6.0 - 9.0
155 lb/1000 Ib
38 lb/1000 Ib
14 lb/1000 Ib
62 lb/1000 Ib
15 lb/1000 Ib
5.7 lb/1000 Ib
6.0 - 9.0
- 16 -
-------
*BPT
BAT
New Sources
Parameter
PART 408 - CANNED
Subpart L -
BODS
TSS
Oil & Grease
PH
Subpart M -
BOD5
TSS
Oil & Grease
PH
Subpart N -
BODS
TSS
Oil 8 Grease
PH
D_a_i1y_ 30 Day
AND PRESERVED SEAFOOD (Continued) FINAL
Daily
REGULATIONS, PUBLISHED
30 Day
6/26/74, EFFECTIVE 6/26/74
Daily
3_0j_a/
Southern Non-Breaded Shrimp Processing in the Contiguous States Subcategory
110 lb/1000 Ib 38 lb/1000 Ib
36 lb/1000 Ib 12 lb/1000 Ib
6.0 - 9.0
Breaded Shrimp Processing in the Contiguous
280 lb/1000 Ib 93 lb/1000 Ib
36 lb/1000 Ib 12 lb/1000 Ib
6.0 - 9.0
Tuna Processing Subcategory
23 lb/1000 Ib 9.0 lb/1000 Ib
8.3 lb/1000 Ib 3.3 lb/1000 Ib
2.1 lb/1000 Ib 0.84 lb/1000 Ib
6.0 - 9.0
25 lb/1000 Ib
8.5 lb/1000 Ib
2.8 lb/1000 Ib
6.0 -
States Subcategory
43 lb/1000 Ib
19 lb/1000 Ib
2.5 lb/1000 Ib
6.0
2.2 lb/1000 Ib
2.2 lb/1000 Ib
0.27 lb/1000 Ib
6.0
10 lb/1000 Ib
3.4 lb/1000 Ib
1.1 lb/1000 Ib
9.0
17.0 lb/1000 Ib
7.4 lb/1000 Ib
1.0 lb/1000 Ib
- 9.0
0.62 lb/1000 Ib
0.62 lb/1000 Ib
0.077 lb/1000 Ib
- 9.0
63 lb/1000 Ib
25 lb/1000 Ib
4.0 lb/1000 Ib
6.0 - 9.0
100 lb/1000 Ib
55 lb/1000 Ib
3.8 lb/1000 Ib
6.0 - 9.0
20 lb/1000 Ib
7.5 lb/1000 Ib
1.9 lb/1000 Ib
6.0 - 9.0
25 lb/1000 Ib
10 lb/1000 Ib
1.6 lb/1000 Ib
40 lb/1000 Ib
22 lb/1000 Ib
1.5 lb/1000 Ib
8.1 lb/1000 Ib
3.0 lb/1000 Ib
0.76 lb/1000 Ib
- 17 -
-------
*BPT
Parameter Daily
PART 409 - SUGAR PROCESSING INDUSTRIES
BAT
New Sources
30 Day Daily 30_Day. Daily 30 Day
FINAL REGULATIONS PUBLISHED 1/31/74. EFFECTIVE 4/1/74 (All references to lb/1000 Ib are to 1000 Ib of product)
Subpart A - Beet Sugar Processing Subcategory
(a) The following limitations establish
the maximum permissible discharge of
process waste water pollutants when the
process waste water discharge results
from barometric condensing operations
only:
BODS
pH
Temperature
3.3 lb/1000 Ib
2.2 lb/1000 Ib
6.0 - 9.0
Not to exceed temp, of cooled water
acceptable for return to the heat
producing process and in no event
greater than 90°F.
(a) Sugar beet processing capacity of
the point source does not exceed 2300 tons/
day of beets sliced and/or the soil filtra-
tion rate in the vicinity of the point
source is less than or equal to 1/16 in./day;
provided however, that a discharge by a
point source may be made in accordance
with the limitations set forth in either
(a)(1) exclusively, or (a)(2) of this
section exclusively.
(1) The following limitations establish
the maximum permissible discharge of
process waste water pollutants when the
process waste water discharge results
from barometric condensing operations
only:
There shall be no discharge of process
waste water pollutants to navigable
waters.
2.0 lb/1000 Ib
1.3 lb/1000 Ib
6.0 - 9.0
Not to exceed the temp, of cooled water
acceptable for return to the heat
producing process and in no event greater
than 90°F.
- 18 -
-------
Parameter
Daih
*BPT
30 Da
BAT
Dail
30
New Sources
Daih
30 Da\
PART 409 - SUGAR PROCESSING INDUSTRIES (Continued) FINAL REGULATIONS PUBLISHED 1/31/74, EFFECTIVE 4/1/74
Subpart A - Beet Sugar Processing Subcategory (Continued J
8005
TSS
PH
(b) The following limitations establish
the maximum permissible discharge of
process waste water pollutants when the
process waste water discharge results,
in whole or in part, from barometric
condensing operations and any other
beet sugar processing operation:
3.3 lb/1000 -lb 2.2 lb/1000 lb
3.3 lb/1000 Ib 2.2 lb/1000 lb
6.0 - 9.0
Fecal Coliform Not to exceed MPN of 400/100 ml at any time
Temperature Not to exceed 90°F
(2) The following limitations establish
the maximum permissible discharge of
process waste water pollutants when the
process waste water discharge results,
in whole or in part, from barometric
condensing operations and any other
beet sugar processing operation:
2.0 lb/1000 Ib
2.0 lb/1000 lb
1.3 lb/1000 lb
1.3 lb/1000 lb
6.0 - 9.0
Not to exceed MPN of 400/100 ml at any time
Not to exceed 90°F
(b) The following limitations establish
the quantity or quality of pollutants or
pollutant properties, controlled by this
regulation, which may be discharged by
a point source in all instances not
specified under the provisions of (a)
above; there shall be no discharge of
process waste water pollutants to
navigable waters.
- 19 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Daily 30 Day Dally 30 Day
PART 409 - SUGAR PROCESSING CATEGORY FINAL REGULATIONS. PUBLISHED 3/20/74. EFFECTIVE 5/20/74
Subpart B - Crystal line Cane Sugar Refining Subcategory
(1) Any crystalline cane sugar refinery
discharging both barometric condenser
cooling water and other process waters
shall meet the following limitations.
The BOD5 limitation is determined by the
addition of the net BOD5 attributed to
the barometric condenser cooling water
to that amount of BODS attributed to the
treated process water. The TSS limita-
tion is that amount of TSS attributed
to the treated process water. Where the
barometric condenser cooling water and
process water streams are mixed and
impossible to measure separately prior
to discharge, the values should be
considered net.
B005 2.38 Ib/ton of melt 0.86 Ib/ton of melt 0.36 Ib/ton of melt 0.18 Ib/ton of melt 0.36 Ib/ton of melt 0.18 Ib/ton of m«U
TSS .54 Ib/ton of melt .18 Ib/ton of melt .21 Ib/ton of melt .07 Ib/ton of melt .21 Ib/ton of melt .07 Ib/ton of melt
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(2) Any crystalline cane sugar refinery
discharging barometric condenser cooling
water only should be required to achieve
the following net limitations:
BODS 2.0* Ib/ton of melt 0.68 Ib/ton of melt
- 20 -
-------
*BPT
BAT
Parameter
Daily
New Sources
PART 409 - SUGAR PROCESSING CATEGORY FINAL REGULATIONS. PUBLISHED 3/20/74, EFFECTIVE 5/2D/74
Subpart_C - Liquid Cane Sugar Refining Subcategory
(1) Any liquid cane sugar refinery dis-
charging both barometric condenser
cooling water and other process waters
shall meet the following limitations.
The BOD5 limitation is determined by
the addition of the net BODS attributed
to the barometric condenser cooling
water to that amount of BODS attributed
to the treated process water. The TSS
limitation is that amount of TSS
attributed to the treated process
water. Where the barometric condenser
cooling water and process water streams
are mixed and impossible to measure
separately prior to discharge, the
values should be considered net.
BODS
TSS
1.56 Ib/ton of melt 0.63 Ib/ton of melt
.99 Ib/ton of melt .33 Ib/ton of melt
6.0 - 9.0
(2) Any liquid cane sugar refinery dis-
charging barometric condenser cooling
water only shall meet the following
net 1 imitations:
0.60 Ib/ton of melt 0.30 Ib/ton of melt
.18 Ib/ton of melt .06 Ib/ton of melt
6.0 - 9.0
0.60 Ib/ton of melt 0.30 Ib/ton of melt
.18 Ib/ton of melt .06 Ib/ton of melt
6.0 - 9.0
BODS
0.90 Ib/ton of melt
0.30 Ib/ton of melt
- 21 -
-------
Parameter
*BPT
BAT
Da i h
30 Dav
New Sources
PART 410 - TEXTILE INDUSTRY FINAL REGULATIONS, PUBLISHED 7/5/74, EFFECTIVE 7/5/74
Subpart A -
BOD5
TSS
COD
Oil & Grease
Total Chromium
Phenol
Sulfide
Color
Fecal Coliform
pH
Wool Scourinq Subcategory
(a)
10.6 lb/1000 Ib 5.3
32.2 lb/1000 Ib 16.
138.0 lb/1000 Ib 69.
7.2 lb/1000 Ib 3.
0.10 lb/1000 Ib 0.
0.10 lb/1000 Ib 0.
0.20 lb/1000 Ib 0.
6.0 - 9.0
lb/1000 Ib
1 lb/1000 Ib
0 lb/1000 Ib
6 lb/1000 Ib
05 lb/1000 Ib
05 lb/1000 Ib
10 lb/1000 Ib
4.8 lb/1000 Ib
4.0 lb/1000 Ib
36.0 lb/1000 Ib
2.0 lb/1000 Ib
0.05 lb/1000 Ib
0.05 lb/1000 Ib
0.10 lb/1000 Ib
Shall not exceed
MPN shall not exc
6.
(b) Additional allocations equal to the
effluent limitations (except pH)
established in (a) of this section are
allowed any point source subject to
such effluent limitations that scours
wool through "commission scouring" as
defined.
2.4 lb/1000 Ib
2.0 lb/1000 Ib
18.0 lb/1000 Ib
1.0 lb/1000 Ib
0.025 lb/1000 Ib
0.025 lb/1000 Ib
0.05 lb/1000 Ib
6.0 - 9.0
(b) Additional allocations equal to the
effluent limitations (except pH)
established in (a) of this section are
allowed any point source subject to
such effluent limitations that scours
wool through "commission scouring" as
defined.
10.6 lb/1000 Ib
10.6 lb/1000 Ib
138.0 lb/1000 Ib
7.2 lb/1000 Ib
0.10 lb/1000 Ib
0.10 lb/1000 Ib
0.20 lb/1000 Ib
5.3 lb/1000 Ib
5.3 lb/1000 Ib
69.0 lb/1000 Ib
3.6 lb/1000 Ib
0.05 lb/1000 Ib
0-05 lb/1000 Ib
0.10 lb/1000 Ib
6.0 - 9.0
(b) Additional allocations equal to the
effluent limitations (except pH)
established in (a) of this section are
allowed any point source subject to
such effluent limitations that scours
wool through "commission scouring" as
defined.
- 22 -
-------
Parameter
Daih
30 Dav
BAT
PART 410 - TEXTILE INDUSTRY (Continued) FINAL REGULATIONS,
Subpart 8 -
BODS
TSS
COD
Total Chromium
Phenol
Sulfide
Color
Fecal Coli form
pH
Wool Finishing Subcategory
(a)
22.4 lb/1000 Ib 11
35.2 lb/1000 Ib 17
163.0 lb/1000 Ib 81
0.14 lb/1000 Ib 0
0.14 lb/1000 Ib 0
0.28 lb/1000 Ib 0
6.0 - 9.0
.2 lb/1000 Ib
.6 lb/1000 Ib
.5 lb/1000 Ib
.07 lb/1000 Ib
.07 lb/1000 Ib
.14 lb/1000 Ib
PUBLISHED 7/5/74, EFFECTIVE 7/5/74
9.2 lb/1000 Ib
5.0 lb/1000
54.2 lb/1000 Ib
0.05 lb/1000 Ib
0.05 lb/1000 Ib
0.10 lb/1000 Ib
Shall not exceed 600
MPN shall not exceed
6.0 -
4.6 Ib,
2.5 Ib,
27.1 Ib,
0.025
0.025
0.05 11
APHA unit
400 count
9.0
(b)
Additional allocations equal to the
effluent limitations (except pH)
established in (a) of this section
are allowed any point source subject
to such effluent limitations that
finishes wool or blended wool fabrics
through "commission finishing" as
defined.
(b)
Additional allocations equal to the
effluent limitations (except pH)
established in (a) of this section
are allowed any point source subject
to such effluent limitations that
finishes wool or blended wool fabrics
through "commission finishing" as
defined.
Dailj
New Sources
30 Da\
22.4 lb/1000 Ib
22.4 lb/1000 Ib
163.0 lb/1000 Ib
0.14 lb/1000 Ib
0.14 lb/1000 Ib
0.28 lb/1000 Ib
11.2 lb/1000 Ib
11.2 lb/1000 Ib
81.5 lb/1000 Ib
0.07 lb/1000 Ib
0.07 lb/1000 Ib
0.14 lb/1000 Ib
6.0 - 9.0
(b)
Additional allocations equal to the
effluent limitations (except pH)
established in (a) of this section
are allowed any point source subject
to such effluent limitations that
finishes wool or blended wool fabrics
through "commission finishing" as
defined.
- 23 -
-------
*BPT
BAT
New Sources
Parameter
Daily 30 Day
PART 410 - TEXTILE INDUSTRY (Continued) FINAL REGULATIONS
Subpart C -
80D5
TSS
COD
Fecal Coliform
PH
Subpart D -
Dry Processing Subcategory
1.4 lb/1000 Ib 0.7 lb/1000 Ib
1.4 lb/1000 Ib 0.7 lb/1000 Ib
2.8 lb/1000 Ib 1.4 lb/1000 Ib
MPN shall not exceed 400 counts per 100 ml.
6.0 - 9.0
Woven Fabric Finishing Subcategory
(a) Finishing of woven fabrics through simple or complex
synthetic fiber blend, except as provided in (e) of
BOOS
TSS
COD
Total Chromium
Phenol
Sulfide
Color
Fecal Coliform
pH
6.6 lb/1000 Ib 3.3 lb/1000 Ib
17.8 lb/1000 Ib 8.9 lb/1000 Ib
60.0 lb/1000 Ib 30.0 lb/1000 Ib
0.10 lb/1000 Ib 0.05 lb/1000 Ib
0.10 lb/1000 Ib 0.05 lb/1000 Ib
0.20 lb/1000 Ib 0.10 lb/1000 Ib
6.0 - 9.0
Dal ly 30 Day
, PUBLISHED 7/5/74, EFFECTIVE 7/5/74
0.4 lb/1000 Ib 0.2 lb/1000 Ib
0.4 lb/1000 Ib 0.2 lb/1000 1b
0.8 lb/1000 Ib 0.4 lb/1000 Ib
MPN shall not exceed 400 counts per 100 ml.
6.0 - 9.0
manufacturing operations employing a natural fiber,
this section:
4.4 lb/1000 Ib 2.2 lb/1000 Ib
3.0 lb/1000 Ib 1.5 lb/1000 Ib
20.0 lb/1000 Ib 10.0 lb/1000 Ib
0.10 lb/1000 Ib 0.05 lb/1000 Ib
0.10 lb/1000 Ib 0.05 lb/1000 Ib
0.20 lb/1000 Ib 0.10 lb/1000 Ib
Shall not exceed 300 APHA units
MPN shall not exceed 400 counts per 100 ml.
6.0 - 9.0
Daijy
1.4 lb/1000 Ib
1.4 lb/1000 Ib
2.8 lb/1000 Ib
MPN shall not exceed
6.0 -
a synthetic fiber or a
6.6 lb/1000 Ib
6.6 lb/1000 Ib
60.0 lb/1000 Ib
0.10 lb/1000 Ib
0.10 lb/1000 Ib
0.20 lb/1000 Ib
6.0 -
30 Day
0.7 lb/1000 Ib
0.7 lb/1000 Ib
2.4 lb/1000 Ib
400 counts per 100 ml
9.0
natural and
3.3 lb/1000 Ib
3.3 lb/1000 Ib
30.0 lb/1000 Ib
0.05 lb/1000 Ib
0.05 lb/1000 Ib
0.10 lb/1000 Ib
9.0
- 24 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Daily 30 Day Daily 30 Day
PART 410 - TEXTILE INDUSTRY (Continued) FINAL REGULATIONS, PUBLISHED 7/5/74, EFFECTIVE 7/5/74
Subpart P - Woven Fabric Finishing Subcategory (Continued)
(b) Finishing of woven fabrics through simple manufacturing operations employing a synthetic fiber or complex manufacturing operations employing
a natural fiber, except as provided in (e) of this section.and in addition to the discharge allowed by (a) of this section:
COD 20 lb/1000 Ib 10 lb/1000 Ib 6.6 lb/1000 Ib 3.3 lb/1000 Ib 20 lb/1000 Ib 10 lb/1000 Ib
(c) Finishing of woven fabrics through simple manufacturing operations employing a natural and synthetic fiber blend or through complex manufacturing
operations employing a synthetic fiber, except as provided in (e) of this section and in addition to the discharge allowed by (a) of this section:
COD 40 lb/1000 Ib 20 lb/1000 Ib 13.4 lb/1000 Ib 6.7 lb/1000 Ib 40 lb/1000 Ib 20 lb/1000 Ib
(d) Finishing of woven fabrics through complex manufacturing operations employing a natural and synthetic fiber blend, except as provided in (e)
of this section and in addition to the discharge allowed by (a) of this section:
COD 60 lb/1000 Ib 30 lb/1000 Ib 20 lb/1000 Ib 10 lb/1000 Ib 60 lb/1000 Ib 30 lb/1000 Ib
(e) Additional allocations equal to the effluent limitations (except pH) established in (a), (b), (c) and (d) of this section are allowed any point
source subject to such effluent limitations that finishes woven fabrics through "commission finishing" as defined.
Subpart E - Knit Fabric Finishing Subcategory
(a) Finishing of knit fabrics through simple or complex manufacturing operations employing a synthetic fiber or a natural and synthetic fiber blend,
except as provided in (d) of this section:
BODS 5.0 lb/1000 Ib 2.5 lb/1000 Ib 3.4 lb/1000 Ib 1.7 lb/1000 Ib 5.0 lb/1000 Ib 2.5 lb/1000 Ib
TSS 21.8 lb/1000 Ib 10.9 lb/1000 Ib 3.4 lb/1000 Ib 1.7 lb/1000 Ib 5.0 lb/1000 Ib 2.5 lb/1000 Ib
COD 60.0 lb/1000 Ib 30.0 lb/1000 Ib 20.0 lb/1000 Ib 10.0 lb/1000 Ib 60.0 lb/1000 Ib 30.0 lb/1000 Ib
Total Chromium 0.10 lb/1000 Ib 0.05 lb/1000 Ib 0.10 lb/1000 Ib 0.05 lb/1000 Ib Q.10 lb/1000 Ib 0.05 lb/1000 Ib
Phenol 0.10 lb/1000 Ib 0.05 lb/1000 Ib 0.10 lb/1000 Ib 0.05 lb/1000 Ib Q.10 lb/1000 Ib 0.05 lb/1000 Ib
Sulfide 0.20 lb/1000 Ib 0.10 lb/1000 Ib 0.20 lb/1000 Ib 0.10 lb/1000 Ib 0.20 lb/1000 Ib 0.10 lb/1000 Ib
- 25 -
-------
*BPT BAT New Sources
Parameter Daily 1031 Daily 30 Day Daily 30 Da_y
PART_410 - TEXTILE INDUSTRY (Continued) FINAL REGULATIONS, PUBLISHED 7/5/74, EFFECTIVE 7/5/74
Subpart E - Knit Fabric Finishing Subcategory (Continued)
(a) Finishing of knit fabrics through simple or complex manufacturing operations employing a synthetic fiber or a natural and synthetic fiber blend,
except as provided in (d) of this section: (continued)
Color Shall not exceed 300 APHA units.
Fecal Coliform MPN shall not exceed 400 counts per 100 ml.
pH 6.0 - 9.0 6,0 - 9.0 6.0 - 9.0
(b) Finishing of knit fabrics through simple manufacturing operations employing a natural and synthetic fiber blend or through complex manufacturing
operations employing a synthetic fiber, except as provided in (d) of this section and in addition to the discharge allowed by (a) of this section:
COD 20 lb/1000 lb 10 lb/1000 Ib 6.6 lb/1000 Ib 3.3 lb/1000 Ib 20 lb/1000 Ib 10 1b/1000 Ib
(c) Finishing of knit fabrics through complex manufacturing operations employing a natural and synthetic fiber blend, except as provided in (d) of
this section and in addition to the discharge allowed by (a) of this section:
COD 40 lb/1000 lb 20 lb/1000 Ib 13.4 lb/1000 lb 6.7 lb/1000 lb 40 lb/1000 lb 20 lb/1000 lb
(d) Additional allocations equal to the effluent limitations(except pH) established in (a), (b), and (c) of this section are allowed any point source
subject to such effluent limitations that finish knit fabrics through "contnission finishing" as defined.
Subpart F - Carpet Mills Subcategory
(a) Manufacture of carpets through simple or complex manufacturing operations:
BOD5 7.8 lb/1000 lb 3.9 lb/1000 lb 4.0 lb/1000 lb 2.0 lb/1000 lb 7.8 lb/1000 Ib 3.9 lb/1000 Ib
TSS 11.0 lb/1000 lb 5.5 lb/1000 lb 2.0 lb/1000 lb 1.0 lb/1000 lb 7.8 lb/1000 lb 3.9 lb/1000 Ib
COD 70.2 lb/1000 Ib 35.1 lb/1000 lb 23.4 lb/1000 Ib 11.7 lb/1000 lb 70.2 lb/1000 lb 35.1 lb/1000 lb
Total Chromium 0.04 lb/1000 lb 0.02 lb/1000 lb 0.04 lb/1000 lb 0.02 lb/1000 lb 0.04 lb/1000 lb O.OZ lb/1000 lb
- 26 -
-------
Parameter
*BPT BAT
Daily 30 Day Daily 30
FINAL REGULATIONS, PUBLISHED 7/5/74, EFFECTIVE 7/5/74
Da ilj
New Sources
30 Da\
PART 411 - TEXTILE INDUSTRY (Continued)
Subpart F - Carpet Mills Subcategory (Continued)
(a) Manufacture of carpets through simple or complex manufacturing operations: (continued)
0,04 lb/1000 1b
0.08 lb/1000 Ib
0.02 lb/1000 Ib
0.04 lb/1000 Ib
Phenol
Sulfide
Color
Fecal Coliform
pH 6.0 - 9.0
(b) Manufacture of carpets through complex manufacturing operations, in addition to the discharge allowed by
COD 20 lb/1000 Ib 10 lb/1000 Ib 6.6 lb/1000 Ib 3.3 lb/1000 Ib
Subpart G - Stock and Yarn Dyeing and Finishing Subcategory
(a)
0.04 lb/1000 Ib 0.02 lb/1000 Ib
0.08 lb/1000 Ib 0.04 lb/1000 Ib
Shall not exceed 225 APHA units.
MPN shall not exceed 400 counts per 100 ml.
6.0 - 9.0
0.04 lb/1000 Ib
0.08 lb/1000 Ib
0.02 lb/1000 Ib
0.04 lb/1000 Ib
6.0 - 9.0
(a) of this section:
20 lb/1000 Ib 10 lb/1000 Ib
BODS
TSS
COD
Total Chromium
Phenol
Sulfide
Color
6.8 lb/1000 Ib
17.4 lb/1000 Ib
84.6 lb/1000 Ib
0.12 lb/1000 Ib
0.12 lb/1000 1b
0.24 lb/1000 Ib
3.4 lb/1000 Ib
8.7 lb/1000 Ib
42.3 lb/1000 Ib
0.06 lb/1000 Ib
0.06 lb/1000 Ib
0.12 lb/1000 Ib
4.6 lb/1000 Ib
3.8 lb/1000 Ib
28.1 lb/1000 Ib
0.12 lb/1000 Ib
0.12 lb/1000 Ib
0.24 lb/1000 Ib
2.3 lb/1000 Ib
1.9 lb/1000 Ib
14.1 lb/1000 Ib
0.06 lb/1000 Ib
0.06 lb/1000 Ib
0.12 lb/1000 Ib
6.8 lb/1000 Ib
6.8 lb/1000 Ib
84.6 lb/1000 Ib
0.12 lb/1000 Ib
0.12 lb/1000 Ib
0.24 lb/1000 Ib
3.4 lb/1000 Ib
3.4 lb/1000 Ib
42.3 lb/1000 Ib
0.06 lb/1000 Ib
0.06 lb/1000 Ib
0.12 lb/1000 Ib
Shall not exceed 300 APHA units.
- 27 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Daily 30 Day Daily 30 gay
PART 410 - TEXTILE INDUSTRY (Continued), FINAL REGULATIONS, PUBLISHED 7/5/74, EFFECTIVE 7/5/74
Subpart G - Stock and Yarn Dyeing and Finishing Subcategory (Continued)
Fecal Coliform MPN shall not exceed 400 counts per 100 ml.
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(b) Additional allocations equal to the effluent limitations (except pH) established in (a) of this section are allowed any point source subject
to such effluent limitations that dyes or finishes stock and yarn through "commission finishing" as defined.
- 28 -
-------
Parameter
*BPT
(Maximum for any 1 Day)
BAT
(Maximum for any 1 Day)
PART 411 - CEMENT MANUFACTURING
FINAL REGULATIONS, PUBLISHED 2/20/74, EFFECTIVE 4/22/74
Subpart A - Monlcaching Subcategory
TSS 0.005 lb/1000 Ib of product
Temperature NTE 3°C rise above inlet temperature
pH 6.0 - 9.0
Subpart B - Leaching Subcategory
TSS 0.4 lb/1000 Ib of dust leached
Temperature NTE 3°C rise above inlet temperature
pH 6.0 - 9.0
Subpart C -_Mat_eri_a1.s Storage Piles Runoff Subcategory
(a) Subject to the provisions of sub-paragraph (b)
of this section, the following limitations
apply:
TSS Not to exceed 50 mg/1
pH 6.0 - 9.0
(b) Any untreated overflow from facilities designed
constructed and operated to treat the volume
of runoff from materials storage piles which
is associated with a 10 year, 24 hour rainfall
event shall not be subject to the pH and TSS
limitations stipulated in subparagraph (a)
above.
0.005 lb/1000 Ib of product
NTE 3°C rise above inlet temperature
6.0 - 9.0
0.005 lb/1000 Ib of dust leached
NTE 3°C rise above inlet temperature
6.0 - 9.0
New Sources
(Maximum for any 1 Day)
0.005 lb/1000 Ib of product
NTE 3°C rise above inlet temperature
6.0 - 9.0
0.4 lb/1000 Ib of dust leached
NTE 3°C rise above inlet temperature
6.0 - 9.0
(a) Subject to the provisions of sub-paragraph (b) No discharge of process waste water
of this section, the following limitations pollutants to navigable waters.
apply:
Not to exceed 50 mg/1
6.0 - 9.0
(b) Any untreated overflow from facilities designed
constructed and operated to treat the volume
of runoff from materials storage piles which
results from a 10 year, 24 hour rainfall event
shall not be subject to the pH and TSS limita-
tions stipulated in subparagraph (a) above.
- 29 -
-------
*BPT
BAT
Parameter
New Sources
PART 412 - FEEDLOTS
FINAL REGULATIONS. PUBLISHED 2/14/74, EFFECTIVE 4/15/74
Subpart A - All Subcategories Except Ducks
The provisions of this subpart are applicable to discharges of pollutants resulting from faedlots in the following subcategories: Beef cattle—open
lots; beef cattle—housed lots; dairy cattle--stall barn (with milk room); dairy—free stall barn (with milking center); dairy--cowyards (with
milking center); swine—open dirt or pasture lots; swine—housed, slotted floor; swine—solid concrete floor, open or housed lot; sheep—open lots;
sheep—housed lots; horses—stables (race tracks); chickens—broilers, housed; chickens—layers (egg production), housed; chickens—layer breeding
or replacement stock, housed; turkeys—open lots; turkeys—housed; and for those feedlot operations within these subcategories as large or larger
than the capacities given below:
1,000 slaughter steers and heifers; 700 mature dairy cattle (whether milkers or dry cows); 2,500 swine weighing over 55 pounds; 10,000 sheep; 55,000
turkeys; 100,000 laying hens or broilers when facility has unlimited continuous flow watering systems; 30,000 laying hens or broilers when facility
has liquid manure handling system; 500 horses; and 1,000 animal units from a combination of slaughter steers and heifers, mature dairy cattle, swine
over 55 pounds and sheep.
(a) Subject to the provisions of paragraph
(b) of this section, there shall be no
discharge of process waste water
pollutants to navigable waters.
(b) Process waste pollutants in the over-
flow may be discharged to navigable
waters whenever rainfall events, either
chronic or catastrophic, cause an over-
flow of process waste water from a
facility designed, constructed and
operated to contain all process
generated waste waters plus the run-
off from a 10 year, 24 hour rainfall
event for the location of the point
source.
(a) Subject to the provisions of paragraph
(b) of this section, there shall be no
discharge of process waste water
pollutants to navigable waters.
(b) Process waste pollutants in the over-
flow may be discharged to navigable
waters whenever rainfall events, either
chronic or catastrophic, cause an over-
flow of process waste water from a
facility designed, constructed and
operated to contain all process
generated waste waters, plus the run-
off from a 25 year, 24 hour rainfall
event for the location of the point
source.
(a) Subject to the provisions of paragraph
(b) of this section, there shall be no
discharge of process waste water
pollutants to navigable waters.
(b) Process waste pollutants in the over-
flow may be discharged to navigable
waters whenever rainfall events, either
chronic, or catastrophic, cause an over-
flow of process waste water from a
facility designed, constructed and
operated to contain all process
generated waste waters, plus the run-
off from a 25 year, 24 hour rainfall
event for the location of the point
source.
Subpart B - Ducks Subcategory
The provisions of this subpart are applicable to discharges of pollutants resulting from feedlots forthe following subcategories:
ducks—wet lot; and for those feedlot operations within these subcategories as large or larger than the capacities given below:
5000 ducks
- 30 -
ducks—dry lot;
-------
*BPT
BAT
Parameter
New Sources
PART 412 - FEEDLOTS (Continued) FINAL REGULATIONS, PUBLISHED 2/14/74, EFFECTIVE 4/15/74
Subpart B - Ducks Subcategory (Continued)
BODS 3.66 lb/1000 ducks 2.00 lb/1000 ducks
Fecal Coliform NTE mpn of 400/100 ml at any time
(a) Subject to the provisions of paragraph
(b) of this section, there shall be no
discharge of process waste water
pollutants to navigable waters.
(b) Process waste pollutants in the over-
flow may be discharged to navigable
waters whenever rainfall events, either
chronic or catastrophic, cause an over-
flow of process waste water from a
facility designed, constructed and
operated to contain all process generated
waste waters plus the runoff from a
25 year, 24 hour rainfall event for the
location of the point source.
30 Day
(a) Subject to the provisions of paragraph
(b) of this section, there shall be
no discharge of process waste water
pollutants to navigable waters.
(b) Process waste pollutants in the over-
flow may be discharged to navigable
waters whenever rainfall events, either
chronic or catastrophic, cause an over-
flow of process waste water from a
facility designed, constructed and
operated to contain all process gener-
ated waste waters plus the runoff from
a 25 year, 24 hour rainfall event for
the location of the point source.
- 31 -
-------
*BPT
Parameter
Daih
30
BAT
Daili
30 Da\
Daih
New Sources
PART 413 - ELECTROPLATING FINAL REGULATIONS. PUBLISHED 3/28/74, EFFECTIVE 5/28/74
Subpart A - Electroplating of Copper, Nickel. Chromium, and Zinc on Ferrous and Nonferrous Materials Subcategory
Cu (a) 32.7 Ib/million sq ft/ 16.4 Ib/million sq ft/ (a) There shall be no discharge of process (a) 16
operation operation waste water pollutants to navigable waters.
Ni 32.7 Ib/million sq ft/ 16.4 Ib/million sq ft/
operation operation
CrVI 3.3 ID/million sq ft/ 1.6 Ib/million sq ft/
operation operation
Cr, Total 32.7 Ib/million sq ft/ 16.4 ID/million sq ft/
operation operation
Zn 32.7 Ib/million sq ft/ 16.4 Ib/million sq ft/
operation operation
CN,A 3.3 Ib/million sq ft/ 1.6 Ib/million sq ft/
operation operation
CM, Total 32.7 Ib/million sq ft/ 16.4 ID/million sq ft/
operation operation
TSS 982.0 Ib/million sq ft/ 654.0 Ib/million sq ft/
operation operation
pH 6.0 - 9.5
(b) Pursuant to section 308 of the Act, point
sources subject to the provisions of this
subpart shall maintain records of produc-
tion expressed in sq m or sq ft for the
purpose of determining compliance with
the above limitations. For the purpose
of complying with the requirements of
this paragraph, a discharger may establish
a correlation between area plated and
another parameter, such as ampere-hours
used in plating.
**Corrected per 39 FR 26642, July 22, 1974.
16
1
16
16
1
**16
491,
.4 Ib/million
sq ft/operation
,4 Ib/million
sq ft/operation
.6 Ib/million
sq ft/operation
,4 Ib/million
sq ft/operation
,4 Ib/million
sq ft/operation
6 Ib/million
sq ft/operation
,4 Ib/million
sq ft/operation
0 ID/million
sq ft/operation
8.2 Ib/million
sq ft/operation
8.2 Ib/million
sq ft/operation
.8 Ib/million
sq ft/operation
**8.2 Ib/million
sq ft/operation
**8.2 Ib/million
sq ft/operation
.8 Ib/million
sq ft/operation
4.7 Ib/million
sq ft/operation
327.0 Ib/million
sq ft/operation
6.0 - 9,5
(b) Application of the factors listed in
section 304(b) of the Act may require varia-
tion from the effluent limitation set forth
in this section for any point source subject
to such effluent limitation with a production
less than 120 sq m per hour. If variation is
determined to be necessary for any such source,
such source shall be subject to effluent
limitations no less stringent than those
required by the standards of performance for
new sources
- 32 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Dally 3Q Day Daily
PART 413 - ELECTROPLATING (Continued) FINAL REGULATIONS, PUBLISHED 3/28/74, EFFECTIVE 5/28/74
Subpart A - Electroplating of Copper, Mickel, Chromium, and Zinc on Ferrous and Nonferrous Materials Subcategory
(c) Application of the factors listed in section
304(b) requires variation from the effluent
limitations set forth above for any point
source subject to such effluent limitations
with a production less than 33 square meters
per hour or an installed direct current
capacity less than 2000 amperes. For such
sources, the best practicable control
technology currently available consists of
cyanide destruction, if any, equalization
and pH adjustment to a range of 6.0 to 9.5**
prior to discharge.
**Corrected per 39 FR 26642, July 22, 1974
- 33 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Daily 30 Day Daily 30 Day
PART 414 - ORGANIC CHEMICALS FINAL REGULATIONS, PUBLISHED 4/25/74, EFFECTIVE 5/13/74 (All references to lb/1000 Ib are to 1000 Ib of product)
Subgart A - Nonagueous Processes Subcategory
BODS 0.045 lb/1000 Ib 0.02 lb/1000 Ib .015 lb/1000 Ib .0085 lb/1000 Ib 0.037 lb/1000 Ib 0.017 lb/1000 Ib
TSS .067 lb/1000 Ib .03 lb/1000 Ib .022 lb/1000 Ib .013 lb/1000 Ib .034 lb/1000 Ib .015 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
COD 0.062 lb/1000 Ib 0.045 lb/1000 Ib
Subpart B - Processes with Process Hater Contact as Steam Diluent or Absorbent Subcategory
(a) The following limitations establish the quantUy or quality of_ppjlutants or pollutant properties, controlled by this paragraph, which may be
discharged from the manufacture of acetone, butadiene (co-product of eth.ylene), ethyl benezene, ethylene and propylene, ethylene d}chloride~
ethylene oxide, formaldehyde, methanol, methyl amines, vinyl acetate, or vinyl chloride (cracking of ethylene dichloride) by a point source
subject to the provisions of this subpart.
COD 0.80 lb/1000 Ib 0.58 lb/1000 Ib
BOD5 0.13 lb/1000 Ib 0.058 lb/1000 Ib .044 lb/1000 Ib .025 lb/1000 Ib 0.11 lb/1000 Ib 0.048 lb/1000 Ib
TSS .20 lb/1000 Ib .088 lb/1000 Ib .066 lb/1000 Ib .040 lb/1000 Ib ,10 lb/1000 Ib .044 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph, which may be
discharged from the manufacture of acetaldehyde (dehydrogenatjon of ethanolj, acetylene (partial oxidation of methane), butadiene (dehydrogenation
of n-butane), butadiene (oxidative-dehydrogenation of butylene**)or styrene by a point source subject to the provisions of this subpart.
COD 1.32 lb/1000 Ib 0.95 lb/1000 Ib
BOD5 0.95 lb/1000 Ib 0.42 lb/1000 Ib .32 lb/1000 Ib .18 lb/1000 Ib 0.76 lb/1000 Ib 0.34 lb/1000 Ib
TSS 1.42 lb/1000 Ib .64 lb/1000 Ib .48 lb/1000 Ib .29 lb/1000 Ib .72 lb/1000 Ib **.32 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
**Corrected per 39 FR 20597, June 12, 1974.
- 34 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Daily 30 Day Daily 30 Day
PART 414 - ORGANIC CHEMICALS (Continued) FINAL REGULATIONS, PUBLISHED 4/25/74, EFFECTIVE 5/13/74
Subpart C - Aqueous Liquid Phase Reaction Systems Subcategory
(a) The following limitations establish the quantity_or quality of pollutants or pollutant properties, controlled by this paragraph, which may be
discharged from the manufacture of acetic acid, acrylic acid, coal tar (distillation), ethylene glycol, terephthalic acid (oxidation of p-xylene),
or polymer grade terephthalic acid (purification of terephthalic acid) by a point source subject to the provisions of this subpart.
COD 0.52 lb/1000 Ib 0.37 lb/1000 Ib
BODS 0.28 lb/1000 Ib 0.12 lb/1000 Ib .093 lb/1000 Ib .053 Ib/TOOO Ib 0.23 ?b/1000 Ib 0.10 lb/1000 Ib
TSS .42 lb/1000 Ib .19 lb/1000 Ib .14 lb/1000 Ib .085 lb/1000 Ib .21 lb/1000 Ib **.094 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph, which may be
discharged"frb'm The~ma"nufacture of acetaldehyde (oxidation of ethylene with oxygen), caprolactam, coal tar (pitch forming), oxo chemicals, or
phenol and acetone (cumene process) by a point source subject to the provisions of this subpart.
COD 1.75 lb/1000 Ib 0.98 lb/1000 Ib
BODS 0.55 lb/1000 Ib 0-25 tb/1000 Ib .12 lb/1000 Ib .068 lb/1000 Ib 0.45 lb/1000 Ib 0.20 lb/1000 Ib
TSS .56 lb/1000 Ib .25 lb/1000 Ib .19 lb/1000 Ib .11 lb/1000 Ib .28 lb/1000 Ib .12 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(c) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph which may be
discharged from the manufacture of acetaldehyde (oxidation of ethytene with air), aniline, bisphenol A, or dimethyl terephtha1_ate by a point
source subject to the provisions of this subpart.
COO 6.07 lb/1000 Ib 4.37 lb/1000 Ib
BOD5 1.15 lb/1000 Ib 0.51 lb/1000 Ib .067 lb/1000 Ib .043 lb/1000 Ib 0.94 lb/1000 Ib 0.42 lb/1000 Ib
TSS .15 lb/1000 Ib .068 lb/1000 Ib .05 lb/1000 Ib .03 lb/1000 Ib .076 lb/1000 Ib .034 lb/1000 Ib
PH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
**Corrected per 39 FR 20597, June 12, 1974
-------
*BPT BAT New Sources
Parameter Paily 30 Day Daily 30 Day Daily 30 Day
PART 414 - ORGANIC CHEMICALS (Continued) FINAL REGULATIONS, PUBLISHED 4/25^74. EFFECTIVE 5/13/74
Subpart C - Aqueous Liquid Phase Reaction Systems Subcategory (Continued)
(d) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph which may be
discharged from the manufacture of acrylates, p-cresol, methyl methacrylate, terephthalic acid (nitric acid process) or tetraethyl lead by a'
point source subject to the provisions of this subpart.
COD 39.25 lb/1000 Ib 28.26 lb/1000 Ib
BOD5 3.08 lb/1000 Ib 1.37 lb/1000 Ib .62 lb/1000 Ib .35 lb/1000 Ib 2.56 lb/1000 Ib 1.14 lb/1000 Ib
TSS 2.80 lb/1000 Ib 1.25 lb/1000 Ib .94 lb/1000 Ib .57 lb/1000 Ib 1.40 lb/1000 Ib .63 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(e) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph, which may be
discharged "from" the manufacture of phenol and acetone, bisphenol A, or p-cresol by a point source subject to the provision of^this subpart.
Phenols 0.045 lb/1000 Ib 0.020 lb/1000 Ib 0.003 lb/1000 Ib 0.017 lb/1000 Ib 0.045 lb/1000 Ib 0.02 lb/1000 Ib
**Corrected per 39 FR 20597, June 12, 1974
- 36 -
-------
*BPT
Parameter
BAT
New Sources
PART 415 - INORGANIC CHEMICALS FINAL REGULATIONS. PUBLISHED 3/12/74, EFFECTIVE 5/13/74
Subpart A - Aluminum Chloride Production Subcategory
There shall be no discharge of process waste
water pollutants to navigable waters.
Subpart B - Aluminum Sulfate Production Subcateqory
(a) Subject to the provisions of paragraphs
(b), (c), and (d) of this section, there
shall be no discharge of process waste
water pollutants to navigable waters.
(b) A process waste water impoundment
which is designed, constructed and oper-
ated so as to contain the precipitation
from the 10 year, 24 hour rainfall event
as established by the National Climatic
Center, National Oceanic and Atmospheric
Administration for the area in which
such impoundment is located may dis-
charge that volume of process waste
water which is equivalent to the
volume of precipitation that falls
within the impoundment in excess of
that attributable to the 10 year, 24
hour rainfall event when such event
occurs.
(c) During any calendar month there may
be discharged from a process waste
water impoundment either a volume of
process waste water equal to the differ-
ence between the precipitation for that
month that falls within the impound-
ment and the evaporation for that month,
or, if greater, a volume of process
There shall be no discharge of process waste
water pollutants to navigable waters.
(a) Subject to the provisions of paragraph
(b) of this section there shall be no dis-
charge of process waste water pollutants
into navigable waters
(b) A process waste water impoundment which
is designed, constructed, and operated so
as to contain the precipitation from the
25 year, 24 hour rainfall event as estab-
lised by the National Climatic Center,
National Oceanic and Atmospheric Adminis-
tration for the area in which such impound-
ment is located may discharge that volume
of process waste water which is equivalent
to the volume of precipitation that falls
within the impoundment in excess of that
attributable to the 25 year. 24 hour
rainfall event, when such event occurs.
There shall be no discharge of process waste
water pollutants to navigable waters.
(a) Subject to the provisions of paragraph
(b) of this section there shall be no dis-
charge of process waste water pollutants
into navigable waters.
(b) A process waste water impoundment which
is designed, constructed, and operated so
as to contain the precipitation from the
25 year, 24 hour rainfall event as estab-
lished by the National Climatic Center,
National Oceanic and Atmospheric Adminis-
tration for the area in which such impound-
ment is located may discharge that volume
of process waste water which is equivalent
to the volume of precipitation that falls
within the impoundment in excess of that
attributable to the 25 year. 24 hour
rainfall event, when such event occurs.
- 37 -
-------
"BPT
Parameter
PART 415 - INORGANIC CHEMICALS (Continued)
BAT
30 Day Daily 30 Day^
FINAL REGULATIONS. PUBLISHED 3/12/74. EFFECTIVE 5/13/74
New Sources
waste water equal to the difference between
the mean precipitation for that month that
falls within the impoundment and the mean
evaporation for that month as established
by the National Climatic Center, National
Oceanic and Atmospheric Administration for
the area in which such impoundment is located
(or as otherwise determined if no monthly
data have been established by the National
Climatic Center).
(d) Any process waste water discharged
pursuant to paragraph (c) of this section
shall comply with each of the following
requirements:
50 ppm
25 ppm
TSS
pH 6.0 - 9.0
Subpart C - Calcium Carbide Production Subcategory
There shall be no discharge of process waste
water pollutants to navigable waters.
Subpart D - Calcium Chloride Production Subcategory
TSS 0.016 lb/1000 Ib of 0.0082 lb/1000 Ib of
prod. prod.
pH 6.0 - 9.0
There shall be no discharge of process waste
water pollutants to navigable waters.
There shall be no discharge of process waste
water pollutants to navigable waters.
There shall be no discharge of process waste
water pollutants to navigable waters.
There shall be no discharge of process waste
water pollutants to navigable waters.
- 38 -
-------
Parameter
*BPT
PART 415 - INORGANIC CHEMICALS (Continued)
BAT
30 Day Daily 30 Day
FINAL REGULATIONS, PUBLISHED 3/12/74. EFFECTIVE 5/13/74
New Sources
30 Day
Subpart E - Calcium Oxide and Calcium Hydroxide Production Subcategory
(a) Subject to the provisions of paragraphs
(b), (c), and (d) of this section, there
shall be no discharge of process waste
water pollutants into navigable waters.
(b) A process waste water impoundment
which is designed, constructed and
operated so as to contain the precipitation
from the 10 year, 24 hour rainfall event
as established by the National Climatic
Center, National Oceanic and Atmospheric
Administration for the area in which such
impoundment is located may discharge that
volume of process waste water which is
equivalent to the volume of precipitation
that falls within the impoundment in excess
of that attributable to the 10 year. 24 hour
rainfall event, when such event occurs.
(c) During any calendar month there may be
discharged from a process waste water
impoundment either a volume of process
waste water equal to the difference
between the precipitation for that
month that falls within the impoundment
and the evaporation for that month, or,
if greater, a volume of process waste
water equal to the difference between
the mean precipitation for that month
that falls within the impoundment and
the mean evaporation for that month
as established by the National Climatic
Center, National Oceanic and Atmospheric
Administration for the area in which
such impoundment is located (or as other-
(a) Subject to the provisions of paragraph
(b) of this section there shall be no dis-
charge of process waste water pollutants
into navigable waters.
(b) A process waste water impoundment
which is designed, constructed, and oper-
ated so as to contain the precipitation
from the 23 year. 24 hour rainfall event
as established by the National Climatic
Center, National Oceanic and Atmospheric
Administration for the area in which such
impoundment Is located may discharge that
volume of process waste water which is
equivalent to the volume of precipitation
that falls within the impoundment in
excess of that attributable to the 25
year. 24 hour rainfall event, when such
event occurs.
(a) Subject to the provisions of paragraph
(b) of this section there shall be no dis-
charge of process waste water pollutants
into navigable waters.
(b) A process waste water impoundment
which is designed, constructed, and oper-
ated so as to contain the precipitation
from the 25 year, 24 hour rainfall event
as established by the National Climatic
Center, National Oceanic and Atmospheric
Administration for the area in which such
impoundment is located may discharge that
volume of process waste water which is
equivalent to the volume of precipitation
that falls within the impoundment in
excess of that attributable to the ^5
-year, 24 hour rainfall event, when such
event occurs.
- 39 -
-------
*BPT
Parameter
BAT
New Sources
PART 415 - INORGANIC CHEMICALS (Continued) FINAL REGULATIONS, PUBLISHED 3/12/74. EFFECTIVE 5/13/74
wise determined if no monthly data have been
established by the National Climatic Center).
(d) Any process waste water discharged pursuant
to paragraph (c) of this section shall comply
with each of the following requirements:
TSS
pH
50 ppm
25 ppm
6.0 - 9.0
Subpa_rt F - Chlorine and Sodium or Potassium Hydroxide Production Subcategory
(a) Chlorine and Sodium or Potassium Hydroxide Manufacture by the Mercury Cell Process:
TSS
Mercury
pH
0.64 lb/1000 Ib
lb of .
product
.00028 lb/1000 lb Qf
prodi
0.32 lb/1000 lb of
product
(1) Subject to the provisions of paragraph
(a){2) of this section there shall be no
.. , .00014 lb/1000 lb of discharge of process waste water pollutants
Product product into navigable waters.
6.0 - 9.0
(2) A process waste water impoundment which
is designed, constructed, and operated so as
to contain the precipitation fromttie 25 year.
24 hour rainfall event as established by tfie
National Climatic Center, National Oceanic
and Atmospheric Administration for the area
in which such impoundment is located may dis-
charge that volume of process waste water
which is equivalent to the volume of precipi-
tation that falls within the impoundment in
excess of that attributable to the 25 year,
24 hour rainfall event, when such event
occurs.
0.64 lb/1000 lb of 0.32 lb/1000 lb of
product product
.00014 lb/1000 lb of -O0007 lb/1000 lb of
product product
6.0 - 9.0
- 40 -
-------
Parameter
Daily
*BPT
_
30 Day Daily ~ 30 Day
FINAL REGULATIONS, PUBLISHED 3/12/74. EFFECTIVE 5/13/74
New Sources
PART 415 - INORGANIC CHEMICALS (Continued) _
(b) Chlorine and Sodium or Potassium Hydroxide Manufacture by the Diaphragm Cell Process:
TSS
Lead
PH
0.64 lb/1000 Ib 0.32 lb/1000 Ib
of product of product
.005 lb/1000 Ib .0025 lb/1000 Ib
of product of product
6.0 - 9.0
There shall be no discharge of process waste
water pollutants to navigable waters.
Subpart G - Hydrochloric Acid Production Subcategory
There shall be no discharge of process waste
water pollutants to navigable waters.
Subpart H -_.Hydrofluoric Acid Production Subcategory
(a) Subject to the provisions of paragraphs
(b), (c), and (d) of this section, there
shall be no discharge of process waste
water pollutants into navigable waters.
(b) A process waste water impoundment
which is designed, constructed and
operated so as to contain the precipitation
from the 10 year. 24 hour rainfall event
as established by the National Climatic
Center, National Oceanic and Atmospheric
Administration for the area in which such
impoundment is located may discharge that
volume of process waste water which is
equivalent to the volume of precipitation
that falls within the impoundment in excess
of that attributable to the 10 year. 24 hour
rainfall event, when such event occurs.
There shall be no discharge of process waste
water pollutants to navigable waters.
(a) Subject to the provisions of paragraph
(b) of this section there shall be no dis-
charge of process waste water pollutants into
navigable waters.
(b) A process waste water impoundment
which is designed, constructed, and oper-
ated so as to contain the precipitation
from the 25 year. 24 hour rainfall event
as established by the National Climatic
Center, National Oceanic and Atmospheric
Administration for the area in which such
impoundment is located may discharge that
volume of process waste water which is
equivalent to the volume of precipitation
that falls within the impoundment in
excess of that attributable to the 25.
year, 24 hour rainfall event, when such
event occurs.
0.64 lb/1000 Ib
of product
.00008 lb/1000 Ib
of product
6.0 - 9.0
0.32 lb/1000 Ib
of product
.00004 lb/1000 Ib
of product
There shall be no discharge of process waste
water pollutants to navigable waters.
(a) Subject to the provisions of paragraph
(b) of this section there shall be no
discharge of process waste water pollutants
into navigable waters.
(b) A process waste water impoundment
which is designed, constructed, and oper-
ated so as to contain the precipitation
from the 25 year, 24 hour rainfall event
as established by the National Climatic
Center, National Oceanic and Atmospheric
Administration for the area in which such ,
impoundment is located may discharge that
volume of process waste water which is
equivalent to the volume of precipitation
that falls within the impoundment in
excess of that attributable to the 25_
j^ear, 24 hour rainfall event, when such
event occurs.
- 41 -
-------
Parameter
*BPT
BAT
New Sources
PART 415 - INORGANIC CHEMICALS (Continued) FINAL REGULATIONS, PUBLISHED 3/12/74. EFFECTIVE 5/13/74
(c) During any calendar month there may be
discharged from a process waste water impound-
ment either a volume of process waste water
equal to the difference between the precipita-
tion for that month that falls within the
impoundment and the evaporation for that month,
or, if greater, a volume of process waste
water equal to the difference between the mean
precipitation for that month that falls within
the impoundment and the mean evaporation for
that month as established by the National
Climatic Center, National Oceanic and
Atmospheric Administration for the area in
which such impoundment is located (or as
otherwise determined if no monthly data have
been established by the National Climatic
Center).
(d) Any process waste water discharged
pursuant to paragraph (c) of this section
shall comply with each of the following
requirements:
Fluoride
TSS
pH
30 ppm 15 ppm
50 ppm 25 ppm
6.0 - 9.0
Subpart I - Hydrogen Peroxide Production Subcategory
(a) Hydrogen Peroxide Manufacture by the Oxidation of Alkyl Hydroanthraquinones
TSS
TOC
PH
0.8 lb/1000 Ib
of product
.44 lb/1000 Ib
of product
6.0 - 9.0
0.4 lb/1000 Ib
of product
.22 lb/1000 Ib
of product
There shall be no discharge of process waste
water pollutants to navigable waters.
- 42 -
There shall be no discharge of process
waste water pollutants to navigable waters.
-------
Parameter
*BPT
PART 415 - INORGANIC CHEMICALS (Continued)
(b) Hydrogen Peroxide Manufacture bv the Electrolytic Process
BAT
30 Day Daily 30 Pay
FINAL REGULATIONS. PUBLISHED 3/12/74, EFFECTIVE 5/13/74
Mew Sources
TSS
Cyanide A
PH
0.005 lb/1000 Ib
of product
.0004 lb/1000 Ib
of product
6.0
- 9.0
0.0025 lb/1000 Ib
of product
.0002 lb/1000 Ib
of product
Subpart J - Nitric Acid Production Subcategory
There shall be no discharge of process waste
water pollutants to navigable waters.
Subpart K - Potassium Metal Production Subcategory
There shall be no discharge of process waste
water pollutants to navigable waters.
Subpart L - Potassium Dichromate Production Subcategory
There shall be no discharge of process waste
water pollutants to navigable waters.
(1) Subject to the provisions of paragraph (b)
(2) of this section there shall be no dis-
charge of process waste water pollutants
into navigable waters.
(2) A process waste water impoundment which
is designed, constructed, and operated so
as to contain the precipitation from the
25 year. 24 hour rainfall event as established
by the National Climatic Center, National
Oceanic and Atmospheric Administration for
the area in which such impoundment is
located may discharge that volume of process
waste water which is equivalent to the
volume of precipitation that falls within
the impoundment in excess of that attrib-
utable to the 25 year, 24 hour rainfall
event, when such event occurs.
There shall be no discharge of process waste
water pollutants to navigable waters.
There shall be no discharge of process waste
water pollutants to navigable waters.
There shall be no discharge of process waste
water pollutants to navigable waters.
(1) Subject to the provisions of paragraph
(b)(2) of this section there shall be no
discharge of process waste water pollutants
into navigable waters,
(2) A process waste water impoundment
which is designed, constructed, and
operated so as to contain the precipita-
tion from the 25 year, 24 hour rainfall
event as established by the National Cli-
matic Center, National Oceanic and At-
mospheric Administration for the area
in which such impoundment is located
may discharge that volume of process waste
water which is equivalent to the volume
of precipitation that falls within the
impoundment in excess of that attrib-
utable to the 25 year. 24 hour rainfall
event, when such event occurs.
There shall be no discharge of process waste
water pollutants to navigable waters.
There shall be no discharge of process waste
water pollutants to navigable waters.
There shall be no discharge of process waste
water pollutants to navigable waters.
- 43 -
-------
*BPT
Parameter
PART 415 - INORGANIC CHEMICALS (Continued)
BAT
30 Day Daily 30^ Day
FINAL REGULATIONS, PUBLISHED 3/12/74, EFFECTIVE 5/13/74
New Sources
Subpart M - Potassium Sulfate Production Subcategory
(a) Subject to the provisions of paragraphs
(b), (c), and (d) of this section, there
shall be no discharge of process waste water
pollutants into navigable waters.
(b) A process waste water impoundment
which is designed, constructed and operated
so as to contain the precipitation from the
10 year. 24 hour rainfall event as establish-
ed by the National Climatic Center, National
Oceanic and Atmospheric Administration for
the area in which such impoundment is located
may discharge that volume of process waste
water which is equivalent to the volume of
precipitation that falls within the
impoundment in excess of that attributable
to the 10 year. 24 hour rainfall event,
when such event occurs.
(c) During any calendar month there may
be discharged from a process waste water
impoundment eitner a volume of process
waste water equal to the difference
between the precipitation for that month
that falls within the impoundment and the
evaporation for that month, or, if greater,
a volume of process waste water equal to
the difference between the mean precipita-
tion for that month that falls within the
impoundment and the mean evaporation for
that month as established by the National
Climatic Center, National Oceanic and
Atmospheric Administration for the area
in which such impoundment is located (or
as otherwise determined if no monthly
data have been established by the National
Climatic Center).
(a) Subject to the provisions of paragraph
(b) of this section there shall be no dis-
charge of process waste water pollutants
into navigable waters.
(b) A process waste water impoundment which
is designed, constructed, and operated so
as to contain the precipitation from the 2JL
year. 24 hour rainfall event as established
by the National Climatic Center, National
Oceanic and Atmospheric Administration for
the area in which such impoundment is located
may discharge that volume of process waste
water which is equivalent to the volume of
precipitation that falls within the impound-
ment in excess of that attributable to the
25 year, 24 hour rainfall event, when such
event occurs.
(a) Subject to the provisions of para-
graph (b) of this section there shall be
no discharge of process waste water pol-
lutants into navigable waters.
(b) A process waste water impoundment
which is designed, constructed, and
operated so as to contain the precipita-
tion from the 2 5, year, 24 hour rainfall
event as established by the National
Climatic Center, National Oceanic and
Atmospheric Administration for the area
in which such impoundment is located
may discharge that volume of process
waste water which is equivalent to the
volume of precipitation that falls within
the impoundment in excess of that at-
tributable to the 25 year, 24 hour rain-
fall event, when such event occurs.
- 44 -
-------
*BPT
Parameter
PART 415 - INORGANIC CHEMICALS (Continued)
BAT
3_Q__Day Daily 30 Day
FINAL REGULATIONS, PUBLISHED 3/12/74, EFFECTIVE 5/13/74
New Sources
(d) Any process waste water discharged
pursuant to paragraph (c) of this section
shall comply with each of the following
requirements:
TSS 50 ppm 25 ppm
pH 6.0 - 9.0
Subpart N - Sodium Bicarbonate Production Sufacategory
There shall be no discharge of process waste
water pollutants to navigable waters.
Subpart 0 - Sodium Carbonate Production Subcategory
TSS **0.34 lb/1000 lb **0.17 lb/1000 Ib
of product of product
pH 6.0 - 9.0
Subpart P - Sodium Chloride Production Subcategory
(a) Manufacture by solar evaporative
process: there shall be no discharge of
process waste water pollutants to navigable
waters, except that unused bitterns may be
returned to the body of water from which the
process brine solution was originally with-
drawn, provided no additional pollutants are
added to the bitterns during the production
of sodium chloride.
(b) The following limitations establish the
quantity or quality of pollutants or pollutant
properties, controlled by this paragraph, which
may be discharged in process waste water from
sodium chloride manufacture by the solution
brinemining process:
TSS 0.34 lb/1000 lb 0.17 lb/1000 lb
of product
9.0
0.34 lb/1000 lb
of product
6.0
There shall be no discharge of process waste
water pollutants to navigable waters.
**0.20 lb/1000 lb
of product
6.0 -
**0.10 lb/1000 lb
of product
9.0
(a) Manufacture by solar evaporative process:
there shall be no discharge of process waste
water pollutants to navigable waters, except
that unused bitterns may be returned to the
body of water from which the process brine
solution was originally withdrawn, provided
no additional pollutants are added to the
bitterns during the production of sodium
chloride.
(b) The following limitations establish the
quantity or quality of pollutants or pollutant
properties, controlled by this paragraph,
which may be discharged in process waste water
from sodium chloride manufacture by the solu-
tion brinemining process: there shall be no
There shall be no discharge of process
waste water pollutants to navigable waters
There shall be no discharge of process
waste water pollutants to navigable waters
(a) Manufacture by solar evaporative
process: there shall be no discharge of
process waste water pollutants to navi-
gable waters, except that unused bitterns
may be returned to the body of water from
which the process brine solution was
originally withdrawn, provided no addition-
al pollutants are added to the bitterns
during the production of sodium chloride.
(b) The following standards of performance
establish the quantity or quality of
pollutants or pollutant properties, con-
trolled by this paragraph, which may be
discharged in process waste water from
sodium chloride manufacture by the solu-
tion brine-mining process: there shall be
po discharge °f process wasLe water pol-
lutants to navigable waters.
**Corrected per 39 FR 20376, June 10, 1974.
- 45 -
-------
*BPT
Parameter
BAT
New Sources
PART 415 - INORGANIC CHEMICALS (Continued) FINAL REGULATIONS, PUBLISHED 3/12/74, EFFECTIVE 5/13/74
Subpart Q - Sodium Dichromate and Sodium Sulfate Production Subcategory
TSS
Cr(+6)
Cr(T)
PH
0.44 lb/1000 Ib
of product
.009 1b/1000 Ib
of product
.0088 lb/1000 Ib
of product
0.22 lb/1000 Ib
of product
.0005 lb/1000 Ib
of product
.0044 lb/1000 Ib
of product
6.0 - 9.0
Subpart P. - Sodium Metal Production Subcategory
TSS 0.45 lb/1000 Ib 0.23 lb/1000 Ib
of product of product
pH 6.0 - 9.0
.(.a) Subject to the provisions of paragraph
(b) of this section there shall be no dis-
charge of process waste water pollutants
into navigable waters.
(b) A process waste water impoundment which
is designed, constructed, and operated so
as to contain the precipitation from the 25
year, 24 hour rainfall event as established"
by the National Climatic Center, National
Oceanic and Atmospheric Administration for
the area in which such impoundment is
located may discharge that volume of process
waste water which is equivalent to the volume
of precipitation that falls within the
impoundment in excess of that attributable
to the 25 year, 24 hour rainfall event, when
such event occurs.
(a) Subject to the provisions of paragraph
(b) of this section there shall be no dis-
charge of process waste water pollutants
into navigable waters.
(b) A process waste water impoundment which
is designed, constructed, and operated so
as to contain the precipitation from the 25_
year, 24 hour rainfall event as established
by the National Climatic Center, National
Oceanic and Atmospheric Administration for
the area in which such impoundment is
located may discharge that volume of process
waste water which is equivalent to the volume
of precipitation that falls within the
0.30 lb/1000 Ib
of product
0.009 lb/1000 Ib
of product
0.0088 lb/1000 Ib
of product
0.15 lb/1000 Ib
of product
0.0005 lb/1000 Ib
of product
0.0044 lb/1000 Ib
of product
6.0 - 9.0
(a) Subject to the provisions of paragraph
(b) of this section there shall be no dis-
charge of process waste water pollutants
into navigable waters.
(b) A process waste water impoundment which
is designed, constructed, and operated so
as to contain the precipitation from the .25
year, 24 hour rainfall event as established
by the National Climatic Center, National
Oceanic and Atmospheric Administration for
the area in which such impoundment is
located may discharge that volume of process
waste water which is equivalent to the volume
- 46 -
-------
rBPT
Parameter
PART 415 - INORGANIC CHEMICALS (Continued)
BAT
30 Day Daily 30_Daiy_
FINAL REGULATIONS. PUBLISHED 3/12/74. EFFECTIVE 5/13/74
impoundment in excess of that attributable
to the 25 year, 24 hour rainfall event, when
such event occurs.
TSS
PH
Subpart S - Sodium Silicate Production Subcateqory
0.01 1b/1000 Ib 0.005 lb/1000 Ib
of product of product
6.0 - 9.0
Subpart T -_Sodium Sulfite Production Subcategory
TSS
COD
pH
0.032 lb/1000 Ib
of product
3.4 lb/1000 Ib
of product
6.0 - 9.0
0.016 lb/1000 Ib
of product
1.7 lb/1000 Ib
of product
(a) Subject to the provisions of paragraph
(b) of this section there shall be no dis-
charge of process waste water pollutants
into navigable waters.
(b) A process waste water impoundment which
is designed, constructed, and operated so
as to contain the precipitation from the 25_
yeaji, 24 hour rainfall event as established
by The National Climatic Center, National
Oceanic and Atmospheric Administration for
the area in which such impoundment is
located may discharge that volume of process
waste water which is equivalent to the volume
of precipitation that falls within the
impoundment in excess of that attributable
to the 25 year, 24 hour rainfall event, when
such event occurs.
(a) Subject to the provisions of paragraph
(b) of this section there shall be no dis-
charge of process waste water pollutants
into navigable waters.
(b) A process waste water impoundment which
is designed, constructed, and operated so
as to contain the precipitation from the 25_
year_, 24 hour rainfall event as established
by the National Climatic Center, National
New Sources
of precipitation that falls within the
impoundment in excess of that attributable
to the 25 year, 24 hour rainfall event,
when such event occurs.
(a) Subject to the provisions of paragraph
(b) of this section there shall be no dis-
charge of process waste water pollutants
into navigable waters.
(b) A process waste water impoundment which
is designed, constructed, and operated so
as to contain the precipitation from the 2_5_
year, 24 hour rainfall event as established
by the National Climatic Center, National
Oceanic and Atmospheric Administration for
the area in which such impoundment is
located may discharge that volume of process
waste water which is equivalent to the volune
of precipitation that falls within the
impoundment in excess of that attributable
to the 25 year, 24 hour rainfall event,
when such event occurs.
There shall be no discharge of process
waste water pollutants to navigable waters
- 47 -
-------
*BPT
Parameter^ Daily
PART 415 - INORGANIC CHEMICALS (Continued)
BAT
30J)ay Dai1.y 3J)Jay
FINAL REGULATIONS, PUBLISHED 3/12/74. EFFECTIVE 5/13/74
Oceanic and Atmospheric Administration for
the area in which such impoundment is
located may discharge that volume of process
waste water which is equivalent to the volume
of precipitation that falls within the
impoundment in excess of that attributable
to the 25 year. 24 hour rainfall event, when
such event occurs.
New Sources
Subpart U - Sulfuric Acid Production Subcategory
There shall be no discharge of process
waste water pollutants to navigable waters.
There shall be no discharge of process
waste water pollutants to navigable waters.
Subpart V - Titanium Dioxide Production Subcategory
(a) Titanium Dioxide Manufacture by the_Chloride Process:
TSS
Iron
PH
TSS
Iron
PH
4.6 lb/1000 Ib 2.3 lb/1000 Ib
of product of product
.72 lb/1000 Ib .36 lb/1000 Ib
of product of product
6.0 - 9.0
2.6 lb/1000 Ib 1.3 lb/1000 Ib
of product of product
.36 lb/1000 Ib .18 lb/1000 Ib
of product of product
6.0 - 9.0
(b) Titanium Dioxide Manufactured by the Sulfate Process:
21.0 lb/1000 Ib
of product
1.7 lb/1000 Ib
of product
10.5 lb/1000 Ib
of product
.84 lb/1000 Ib
of product
6.0 - 9.0
10.6 lb/1000 Ib 5.3 lb/1000 Ib
of product of product
.84 lb/1000 Ib .42 lb/1000 Ib
of product of product
6.0 - 9.0
There shall be no discharge of process
waste water pollutants to navigable waters.
2.6 lb/1000 Ib
of product
.36 lb/1000 Ib
of product
6.0
- 9.0
10.6 lb/1000 Ib
of product
.84 lb/1000 Ib
of product
6.0 -
1.3 lb/1000 Ib
of product
.18 lb/1000 Ib
of product
5.3 lb/1000 Ib
of product
.42 lb/1000 Ib
of product
9.0
- 48 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Dally 30 Day Daily 30_Pay
PART 416 - PLASTICS AND SYNTHETICS Fj[NAL REGULATIONS, PUBLISHED 4/5/74, EFFECTIVE 6/4/74 (All references to lb/1000 Ib are to 1000 Ib of product)
Subpart A^L Potyvinyl Chloride Subcategory
(a) Limitations for discharge from the manufacture of polyvinyl chloride by the suspension polymerization process:
BODS 0.70 lb/1000 Ib 0.36 lb/1000 Ib 0.41 lb/1000 Ib 0.28 lb/1000 Ib 0.37 lb/1000 Ib 0.19 lb/1000 Ib
COD 7.0 lb/1000 Ib 3.6 lb/1000 Ib 1.92 lb/1000 Ib 1.28 lb/1000 Ib 1.70 lb/1000 Ib .89 lb/1000 Ib
TSS 1.8 lb/1000 Ib .99 lb/1000 Ib .23 lb/1000 Ib .19 lb/1000 Ib .19 lb/1000 Ib .13 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(b) Limitations for discharge from the manufacture of polyvinyl chioricfe by the emulsion_polymerizatio_n process;
BODS 0.26 lb/1000 Ib 0.13 lb/1000 Ib 0.20 lb/1000 Ib 0.13 lb/1000 Ib 0.26 lb/1000 Ib 0.13 lb/1000 Ib
COD 2,6 lb/1000 Ib 1.3 lb/1000 Ib .92 lb/1000 Ib .61 lb/1000 Ib 1.20 lb/1000 Ib .61 lb/1000 Ib
TSS .65 lb/1000 Ib .36 lb/1000 Ib .11 lb/1000 Ib .092 lb/1000 Ib .14 lb/1000 Ib .092 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(c) Limitations for discharge from thejnanufacture of polyvinyl chloride by the bulk polymerization process:
BODS 0.12 lb/1000 Ib 0.06 lb/1000 Ib 0.09 lb/1000 Ib 0.06 lb/1000 Ib 0.12 lb/1000 Ib 0.06 lb/1000 Ib
COD 1.2 lb/1000 Ib .60 lb/1000 Ib .42 lb/1000 Ib .28 lb/1000 Ib .54 lb/1000 Ib .28 lb/1000 Ib
TSS .29 lb/1000 Ib .16 lb/1000 Ib .05 lb/1000 Ib .042 lb/1000 Ib .06 lb/1000 Ib .042 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
- 49 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Daily 30 Day Daily 3Q pay
PART 416 - PLASTICS AND SYNTHETICS (Continued) FINAL_R_EGULATIONS. PUBLISHED 4/5/74, EFFECTIVE 6/4/74
Subpart 6 - Polyvlnyl Acetate Subcateqory^
BOD5 0.39 lb/1000 Ib 0.20 lb/1000 Ib 0.29 lb/1000 Ib 0.19 lb/1000 Ib 0.35 lb/1000 Ib 0.18 lb/1000 Ib
COD 3.9 lb/1000 Ib 2.0 lb/1000 Ib 1.33 lb/1000 Ib .89 lb/1000 Ib 1.6 lb/1000 Ib .84 lb/1000 Ib
TSS 1.0 lb/1000 Ib .55 lb/1000 Ib .16 lb/1000 Ib .14 lb/1000 Ib .19 lb/1000 Ib .13 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
Subpart C - Polystyrene Subcategory
(a) Limitations for discharge from the manufacture of polystyrene by the suspension polymerization process:
BODS 0.43 lb/1000 Ib 0.22 lb/1000 Ib 0-33 lb/1000 Ib 0.22 lb/1000 Ib 0.43 lb/1000 Ib 0.22 lb/1000 Ib
COD 4.3 lb/1000 Ib 2.20 lb/1000 Ib 1.55 lb/1000 Ib 1.03 lb/1000 Ib 2.0 lb/1000 Ib 1.03 lb/1000 Ib
Total Chromium .0046 lb/1000 Ib .0023 lb/1000 Ib .0046 lb/1000 Ib .0023 lb/1000 Ib .0046 lb/1000 Ib .0023 lb/1000 Ib
TSS 1.1 lb/1000 Ib .61 lb/1000 Ib .18 lb/1000 Ib .16 lb/1000 Ib .24 lb/1000 Ib .16 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(b) Limitations for discharge from the manufacture of polystyrene by bulk polymen'zation process:
BOD5 0.08 lb/1000 Ib 0.04 lb/1000 Ib 0.06 lb/1000 Ib 0.04 lb/1000 Ib 0.08 lb/1000 Ib 0.04 lb/1000 Ib
COD .80 lb/1000 Ib .40 lb/1000 Ib .29 lb/1000 Ib .19 lb/1000 Ib .37 lb/1000 Ib .19 lb/1000 Ib
TSS .20 lb/1000 Ib .11 lb/1000 Ib .033 lb/1000 Ib -028 lb/1000 Ib .04 lb/1000 Ib .028 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
- 50 -
-------
*BPT
BAT
Parameter Dally 30 Day Daily 30__Day_
PART 416 - PLASTICS AND SYNTHETICS (Continued) FINAL REGULATIONS, PUBLISHED 4/5/74, EFFECTIVE 6/4/74
New Sources
0.48 lb/1000 lb
3.21 lb/1000 lb
.27 lb/1000 lb
0.32 lb/1000 lb
2.14 lb/1000 lb
.23 lb/1000 lb
Subpart D - Polypropylene Subcatpgory
BOD5 0.81 lb/1000 lb 0.42 lb/1000 lb
COD 4.1 lb/1000 lb 2.1 lb/1000 lb
TSS 2.1 lb/1000 lb 1.16 lb/1000 lb
pH 6.0 - 9.0 6.0 - 9.0
Subpart E - Polyethylene Subcategory
(a) Limitations for discharge from the manufacture of low density polyethylene:
BODS 0.39 lb/1000 lb 0.20 lb/1000 lb 0.29 lb/1000 lb
COD 3.9 lb/1000 lb 2.0 lb/1000 lb 2.48 lb/1000 lb
TSS 1.0 lb/1000 1b .55 lb/1000 lb .16 lb/1000 lb
pH 6.0 - 9.0 6.0 - 9.0
(b) Limitations for discharge from the manufacture of high density polyethylene by the solvent process:
0.19 lb/1000 lb
1.65 lb/1000 lb
.14 lb/1000 lb
BOD5 0.58 lb/1000 lb
COD 5.8 lb/1000 lb
Total Chromium .0062 lb/1000 lb
TSS 1.5 lb/1000 lb
0.30 lb/1000 lb
3.0 lb/1000 lb
.0031 lb/1000 lb
.83 lb/1000 lb
0.45 lb/1000 lb
2.40 lb/1000 lb
.0062 lb/1000 Ib
.25 lb/1000 lb
0.30 lb/1000 lb
1.60 lb/1000 lb
.0031 lb/1000 lb
.21 lb/1000 lb
Daih
0.43 lb/1000 lb
2.9 lb/1000 lb
.24 lb/1000 lb
6.0 - 9.0
0.35 lb/1000 lb
3.5 lb/1000 Ib
.19 lb/1000 lb
6.0 - 9.0
0.58 lb/1000 lb
3.1 lb/1000 lb
.0062 lb/1000 lb
.31 lb/1000 lb
30 Dav
0.22 lb/1000 lb
1.47 lb/1000 lb
.16 lb/1000 Ib
0.18 lb/1000 lb
1.80 lb/1000 lb
.13 lb/1000 lb
0.3 lb/1000 lb
1.6 lb/1000 lb
.0031 lb/1000 Ib
.21 lb/1000 lb
PH
6.0 - 9.0
6.0 - 9.0
6.0 - 9.0
- 51 -
-------
*BPT
BAT
New Sources
Parameter Daily
PART
30 Day
416 - PLASTICS AND SYNTHETICS (Continued) FINAL
Subpart E - Polyethylene Subcategory
(Continued)
(c) Limitations for discharge from the manufacture
BODS
COD
TSS
pH
BOD5
COD
TSS
pH
BODS
COD
Zinc
TSS
0.10 lb/1000 Ib 0.
1.0 lb/1000 Ib
.25 lb/1000 Ib
6.0 - 9.0
Subpart F - Cellophane Subcategory
17.8 lb/1000 Ib 8.
178.0 lb/1000 Ib 87.
29.1 lb/1000 Ib 16.
6.0 - 9.0
Subpart G - Rayon Subcategory
10.0 lb/1000 Ib 4.
150.0 lb/1000 Ib 72.
.91 lb/1000 Ib
16.0 lb/1000 Ib 8.
052 lb/1000 Ib
52 lb/1000 Ib
14 lb/1000 Ib
7 lb/1000 Ib
0 lb/1000 Ib
0 lb/1000 Ib
8 lb/1000 Ib
0 lb/1000 Ib
534 lb/1000 Ib
8 lb/1000 Ib
Daily
REGULATIONS, PUBLISHED
30 Day
4/5/74, EFFECTIVE 6/4/74
Daily
of high density polyethylene by the polyform process:
0.078 lb/1000 Ib
.42 lb/1000 Ib
**.043 lb/1000 Ib
6.
**7.9 lb/1000 Ib
**68.3 lb/1000 Ib
3.75 lb/1000 Ib
6.
**4.4 lb/1000 Ib
**37.9 lb/1000 Ib
0.210 lb/1000 Ib
2.08 lb/1000 Ib
0.052 lb/1000 Ib
.28 lb/1000 Ib
**.037 lb/1000 Ib
0 - 9.0
**5.1 lb/1000 Ib
**43.9 lb/1000 Ib
3.19 lb/1000 Ib
0 - 9.0
**2.8 lb/1000 Ib
**24.4 lb/1000 Ib
0.105 lb/1000 Ib
1.77 lb/1000 Ib
0.10 lb/1000 Ib 0.
.54 lb/1000 Ib
.05 lb/1000 Ib
6.0 - 9.0
**7.41 lb/1000 Ib **3J
**98 lb/1000 Ib **48
3.3 lb/1000 Ib 2.
6.0 - 9.0
**4.171b/1000 Ib **2.l
**97 lb/1000 Ib **47.
0.15 lb/1000 Ib 0.'
1.9 lb/1000 Ib 1.
30 Day
0.054 lb/1000 Ib
.28 lb/1000 Ib
.036 lb/1000 Ib
2.27 lb/1000 Ib
0.075 lb/1000 Ib
1.28 lb/1000 Ib
pH 6.0 - 9.0
**Corrected per 39 FR 24893, July 8, 1974.
6.0 - 9.0
6.0 - 9.0
- 52 -
-------
*BPT
BAT
Parameter Daily 30 Day pally 30 Day
PftRT 416 - PLASTICS AND SYNTHETICS (Continued) FINAL REGULATIONS, PUBLISHED 4/5/74, EFFECTIVE 6/4/74
New Sources
Subpartjj - Acrylonitri1e-Buta_diene-Styj:ene_(ABS)_and Styrene-Acrylom'tn'le (SAN) Resin Copolymers
BOD5
COD
T5S
1.3 lb/1000 Ib
13-0 lb/1000 Ib
2.1 lb/1000 Ib
0.63 lb/1000 Ib
6.3 lb/1000 Ib
1.16 lb/1000 Ib
Total Chromium .0088 lb/1000 Ib .0044 lb/1000 Ib
pH 6.0 - 9.0
Subpart I - Polyester Subcategory
(a) Limitations for discharge from the manufacture of
BOD5 1.4 lb/1000 Ib 0.78 lb/1000 Ib
COD 21.5 lb/1000 Ib 11.7 lb/1000 Ib
TSS .95 lb/1000 Ib .52 lb/1000 Ib
pH 6.0 - 9.0
(b) Limitations for discharge from the manufacture of
BODS 1.4 lb/1000 Ib 0.78 lb/1000 Ib
COD 21.5 lb/1000 Ib 11.7 lb/1000 Ib
TSS .95 lb/1000 Ib .52 lb/1000 Ib
pH 6.0 - 9.0
**.70 lb/1000 Ib
**5-1 lb/1000 Ib
0.33 lb/1000 Ib
0.0084 lb/1000 Ib
6.0
**.45 lb/1000 Ib
**3.3 lb/1000 Ib
0.28 lb/1000 Ib
0.0042 lb/1000 Ib
9.0
polyester resin by batch processing:
**.59 lb/1000 Ib
**3.1 lb/1000 Ib
0.16 lb/1000 Ib
6.0 -
polyester fiber by batch
**.44 lb/1000 Ib
**2.3 lb/1000 Ib
0.13 lb/1000 Ib
9.0
processing:
**.59 lb/1000 Ib
**3.1 lb/1000 Ib
0.16 lb/1000 Ib
6.0 -
**.44 lb/1000 Ib
**2.3 lb/1000 Ib
0.13 lb/1000 Ib
9.0
Oailj
30 Dav
**.88 lb/1000 Ib
**6.5 lb/1000 Ib
**.43 lb/1000 Ib
**3.1 lb/1000 Ib
0.40 lb/1000 Ib Q.27 lb/1000 Ib
0.0080 lb/1000 Ib 0.0040 lb/1000 Ib
6.0 - 9.0
**.79 lb/1000 Ib
**7.3 lb/1000 Ib
0.19 lb/1000 Ib
**.44 lb/1000 Ib
**4.0 lb/1000 Ib
0.13 lb/1000 Ib
6.0 - 9.0
**.79 lb/1000 Ib
"*7.3 lb/1000 Ib
0.19 lb/1000 Ib
**.44 lb/1000 Ib
**4.0 lb/1000 Ib
0.13 lb/1000 1b
6.0 - 9.0
**Corrected per 39 FR 24893, July 8, 1974.
- 53 -
-------
*BPT
BAT
Parameter Daily 30 Day Da i1y 30 Day
PART 416 - PLASTICS AND SYNTHETICS (Continued) FINAL REGULATIONS. PUBLISHED 4/5/74, EFFECTIVE 6/4/74
Subpart I - Polyester Subcategory (Continued)
(c) Limitations for discharge from the manufacture of polyester resin and fiber by continuous processing:
Daih
New Sources
30 Dav
**.34 lb/1000 Ib
**1.8 lb/1000 Ib
BODS 1.4 lb/1000 Ib 0.78 lb/1000 Ib **.47 lb/1000 Ib
COD 21.5 lb/1000 Ib 11.7 lb/1000 Ib **2.4 lb/1000 Ib
TSS .95 lb/1000 Ib .52 lb/1000 Ib **0.13 lb/1000 Ib **0.11 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0
(d) Limitations for discharge from the manufacture of polyester resin and fiber by batch processing:
BOD5 2.8 lb/1000 Ib 1.56 lb/1000 Ib **1.2 lb/1000 Ib **.87 lb/1000 Ib
COD 43.0 lb/1000 Ib 23.4 lb/1000 Ib **6.2 lb/1000 Ib **4.5 lb/1000 Ib
TSS 1.9 lb/1000 Ib 1.04 lb/1000 Ib **0.32 lb/1000 Ib **0.27 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0
Subpart J - Nylon 66 Subcateqory
(a) Limitations for discharge from the manufacture of nylon 66 resin:
8005 1.2 lb/1000 Ib 0.66 lb/1000 Ib **-5 lb/1000 Ib
COD 6.0 lb/1000 Ib 3.3 lb/1000 Ib **2.6 lb/1000 Ib
TSS .80 lb/1000 Ib .44 lb/1000 Ib **0.13 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0
**.37 lb/1000 Ib
**1.9 lb/1000 Ib
**0.11 lb/1000 Ib
**.46 lb/1000 Ib
**4.2 lb/1000 Ib
0.12 lb/1000 Ib
**.25 lb/1000 Ib
**2.32 lb/1000 Ib
0.078 lb/1000 Ib
6.0 - 9.0
**1.58 lb/1000 Ib **.87 lb/1000 Ib
**14.6 lb/1000 Ib **8.0 lb/1000 Ib
**0.4 lb/1000 Ib **0-27 lb/1000 Ib
6.0 - 9.0
**.67 lb/1000 Ib
**4.8 lb/1000 Ib
**0.16 lb/1000 Ib
6.0 - 9.0
**.37 lb/1000 Ib
**2.6 lb/1000 Ib
**O.H lb/1000 Ib
**Corrected per 39 FR 24893, July 8, 1974.
- 54 -
-------
Parameter
*BPT
BAT
Dail)
30 Dav
Dail]
30 Dav
**.32 lb/1000 Ib
**1.7 lb/1000 Ib
**0.10 lb/1000 Ib
PART 416 - PLASTICS AND SYNTHETICS (Continued) FINAL REGULATIONS, PUBLISHED 4/5/74, EFFECTIVE 6/4/74
Subpart J - Nylon 66 Subcategory (Continued)
(b) Limitations for discharge from the manufacture of nylon 66 fiber:
BODS 1.1 lb/1000 Ib 0.58 lb/1000 Ib **.44 lb/1000 Ib
COD 5.3 lb/1000 Ib 3.0 lb/1000 Ib **2.3 lb/1000 Ib
TSS .70 lb/1000 Ib .39 lb/1000 Ib **0.12 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0
(c) Limitations for discharge from the manufacture of nylon 66 resin and fiber:
BOD5 2.3 lb/1000 )b 1.24 lb/1000 Ib **-94 lb/1000 Ib **.69 lb/1000 Ib
COD 11.3 lb/1000 Ib 6.2 lb/1000 Ib **4.9 lb/1000 Ib **3.6 lb/1000 Ib
TSS 1.5 lb/1000 Ib .83 lb/1000 Ib **0.25 )b/1000 Ib **0.21 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0
Subpart K - Nylon 6 Subcategory
(a) Limitations for discharge from the manufacture of nylon 6 resin:
BOD5 6.8 lb/1000 Ib 3.71 lb/1000 Ib **2.45 lb/1000 Ib
COD 68.0 lb/1000 Ib 37.1 lb/1000 Ib **12.7 lb/1000 Ib
TSS 4.5 lb/1000 Ib 2.48 lb/1000 Ib **0.65 lb/1000 Ib
**1.8 lb/1000 Ib
**9.3 lb/1000 Ib
**0.55 lb/1000 Ib
pH
6.0 - 9.0
6.0 - 9.0
Daili
New Sources
30 Dav
**.58 lb/1000 Ib
**4.2 lb/1000 Ib
**0.15 lb/1000 Ib
**.32 lb/1000 Ib
**2.3 lb/1000 Ib
**0.10 lb/1000 Ib
6.0 - 9.0
**1.25 lb/1000 Ib
**9.0 lb/1000 Ib
**0.31 lb/1000 Ib
**.69 lb/1000 Ib
**4.95 lb/1000 Ib
**0.21 lb/1000 Ib
6.0 - 9.0
**2.75lb/1000 Ib
**28.6 lb/1000 Ib
**0.69 lb/1000 Ib
**1.51 lb/1000 Ib
**15.7 lb/1000 Ib
**0.47 lb/!000 Ib
6.0 - 9.0
**Corrected per 39 FR 24893, July 8, 1974.
- 55 -
-------
*BPT
BAT
Parameter Daily 30 Day Daily 30 Day
PART 416 - PLASTICS AMD SYNTHETICS (Continued) FINAL REGULATIONS, PUBLISHED 4/5/74. EFFECTIVE 6/4/74
Subpart K - Nylon 6 Subcategory (Continued)
(b) Limitations for discharge from the manufacture of nylon 6 fiber:
BOD5 3.5 lb/1000 1b 1.90 lb/1000 Ib 1.00 lb/1000 Ib
COO 35.0 lb/1000 Ib 19.0 lb/1000 Ib 5.21 lb/1000 Ib
TSS 2.3 lb/1000 Ib 1.27 lb/1000 Ib .33 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0
(c) Limitations for discharge from the manufacture of nylon 6 resin and fiber:
New Sources
0.67 lb/1000 Ib
3.44 lb/1000 Ib
.28 lb/1000 Ib
10.3 lb/1000 Ib
103.0 lb/1000 Ib
6.8 lb/1000 Ib
5.61 lb/1000 Ib
56.1 lb/1000 Ib
3.75 lb/1000 Ib
2.95 lb/1000 Ib
15.3 lb/1000 Ib
.98 lb/1000 Ib
BOD5
COD
TSS
pH 6.0 - 9.0 6.0 - 9.0
Subpart L - Cellulose Acetate Subcategory
(a) Limitations for discharge from the manufacture of cellulose acetate resin:
BOD5 7.5 lb/1000 Ib 4.13 lb/1000 Ib 1.88 lb/1000 Ib
COD 75.0 lb/1000 Ib 41.3 lb/1000 Ib 9-75 lb/1000 Ib
TSS 5.0 lb/1000 Ib 2.75 lb/1000 Ib .63 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9-0
**Corrected per 39 FR 24893, July 8, 1974.
1.97 lb/1000 Ib
10.2 lb/1000 Ib
.84 lb/1000 Ib
1.25 lb/1000 Ib
6.5 lb/1000 Ib
.53 lb/1000 Ib
Daih
30 Dav
**1.42 lb/1000 Ib
**14.7 lb/1000 Ib
**0.35 lb/1000 Ib
**.78 lb/1000 Ib
**8.1 lb/1000 Ib
**0.24 lb/1000 Ib
6.0 - 9.0
**4.17 lb/1000 Ib
**43.4 lb/1000 Ib
1.1 lb/1000 Ib
**2.29 lb/1000 Ib
**23.9 lb/1000 Ib
**0.71 lb/1000 Ib
6.0 - 9.0
**2.08 lb/1000 Ib
**20 lb/1000 Ib
**0.51 lb/1000 Ib
**1.15 lb/1000 Ib
**11 lb/1000 Ib
0.35 lb/1000 Ib
6.0 - 9.0
- 56 -
-------
"BPT
BAT
Parameter Daily 30 Day Daily 30 Day
PART 416 - PLASTICS AND SYNTHETICS (Continued) FINAL REGULATIONS. PUBLISHED 4/5/74, EFFECTIVE 6/4/74
Subpart L - Cellulose Acetate Subcategory (Continued)
(b) Limitations for discharge from the manufacture^ of cellulose acetate fiber:
BODS 7.5 lb/1000 lb 4.13 lb/1000 Ib 1.88 lb/1000 Ib
COD 75.0 ?b/1000 lb 41.3 lb/?000 lb 9.75 Ib/WOQ lb
TSS 5.0 lb/1000 lb 2.75 lb/1000 lb .63 lb/1000 lb
pH 6.0 - 9.0 6.0 - 9.0
(c) Limitations for discharge from the manufacture of cellulose acetate resin and fiber:
1.25 lb/1000 lb
6.5 lb/1000 lb
.53 lb /1000 lb
BOD5
COD
TSS
pH 6.0 - 9.0
Subpart M - Acrylics Subc_ate.go_ry
15.0 lb/1000 lb
150.0 lb/1000 lb
10.0 lb/1000 lb
8.26 lb/1000 lb
82.6 lb/1000 lb
5.50 lb/1000 lb
3.75 lb/1000 lb
19.5 lb/1000 lb
1.26 lb/1000 lb
2.50 lb/1000 lb
13.0 lb/1000 lb
1.06 lb/1000 lb
6.0 - 9.0
BOD 5
COD
TSS
Phenolic
Compounds
5.0 lb/1000 lb
25.0 lb/1000 lb
2.0 lb/1000 lb
.017 lb/1000 lb
2.75 lb/1000 Ib
13.8 lb/1000 lb
1.1 lb/1000 lb
.0083 lb/1000 lb
0.98 lb/1000 lb
5.07 lb/1000 lb
.33 lb/1000 lb
.0032 lb/1000 lb
0.65 lb/1000 lb
3.38 lb/1000 Ib
.27 lb/1000 lb
.0016 lb/1000
PH
6.0 - 9.0
6.0 - 9.0
**Corrected per 39 FR 24893, July 8, 1974.
Dailj
New Sources
30 Day
**2.08 lb/1000 lb **1.15 lb/1000 lb
**20 lb/1000 lb **U Jb/1000 Ib
0.51 lb/1000 lb 0-35 lb/1000 lb
6.0 - 9.0
**4.17 lb/1000 lb
**40 lb/1000 lb
1.1 lb/1000 lb
**2.29 lb/1000 lb
**22 lb/1000 lb
0.71 lb/1000 Ib
6.0 - 9.0
**1.58 lb/1000 lb
**30.4 lb/1000 lb
**0.4 lb/1000 lb
**.87 lb/1000 lb
**16.7 lb/1000 lb
**0.27 lb/1000 lb
0.0032 lb/1000 lb 0.0016 lb/1000 Ib
6.0 - 9.0
- 57 -
-------
*BPT
BAT
New Sources
Parameter Dally 30 Day Daily
PART
BOD5
COD
TSS
Oil
pH
BODS
COD
TSS
Oil
PH
BODS
COD
TSS
Oil
PH
417 - SOAP AND DETERGENT FINAL REGULATIONS, PUBLISHED 4/12/74, EFFECTIVE 6/11/74
(All references to lb/1000 Ib are to 1000 Ib of anhydrous product)
Subpart A - Soap Manufacturing by Batch Kettle Subcateqory
1.80 lb/1000 Ib 0,60 lb/1000 Ib 0.80 lb/1000 Ib
4.50 lb/1000 Ib 1.50 lb/1000 1b 2.10 lb/1000 Ib
1.20 lb/1000 Ib .40 lb/1000 Ib .80 lb/1000 Ib
& Grease .30 lb/1000 Ib .10 lb/1000 Ib .10 lb/1000 Ib
6.0 - 9.0 6.0 - 9.0
Subpart B - Fatty Acid Manufacturing by Fat Splitting Subcategory
(a) Discharges from the splitting of fats to fatty acids by hydrolysis:
3.60 lb/1000 Ib 1.20 lb/1000 Ib 0.50 lb/1000 Ib
9.90 lb/1000 Ib 3.30 lb/1000 Ib 1.80 lb/1000 Ib
6.60 lb/1000 Ib 2.20 lb/1000 Ib .40 lb/1000 Ib
& Grease .90 lb/1000 Ib .30 lb/1000 Ib .30 Ib/TOuO Ib
6.0 - 9.0 6.0 - 9
fb) If fatty acids are hydrogenated, the following additional allowancas shall apply:
0.45 lb/1000 Ib 0.15 lb/1000 Ib 0.30 lb/1000 Ib
.75 lb/1000 Ib .25 lb/1000 Ib .50 lb/1000 Ib
.30 lb/1000 Ib .10 lb/1000 Ib .20 lb/1000 Ib
& Grease .30 lb/1000 Ib .10 lb/1000 Ib .20 lb/1000 Ib
6.0 - 9.0 6.0 - 9.
30 Day
0.40 lb/1000 Ib
1.05 lb/1000 Ib
.40 lb/1000 Ib
.05 lb/1000 Ib
0.25 lb/1000 Ib
.90 lb/1000 Ib
.20 lb/1000 Ib
.15 lb/1000 Ib
.0
0.15 lb/1000 Ib
.25 lb/1000 Ib
.10 lb/1000 Ib
.10 lb/1000 Ib
0
Dally
0.80 lb/1000
2.10 lb/1000
.40 lb/1000
.10 lb/1000
0.50 lb/1000
1.80 lb/1000
.40 lb/1000
.30 lb/1000
0.30 lb/1000
.50 lb/1000
.20 lb/1000
.20 lb/1000
30_Day
Ib 0.40 lb/1000 Ib
Ib 1.05 lb/1000 Ib
Ib .40 lb/1000 Ib
Ib .05 lb/1000 Ib
6.0 - 9.0
0.25 lb/1000 Ib
Ib .90 lb/1000 Ib
Ib .20 lb/1000 Ib
Ib .15 lb/1000 Ib
6.0 - 9.0
Ib 0.15 lb/1000 Ib
Ib .25 lb/1000 Ib
Ib .10 lb/1000 Ib
Ib .10 lb/1000 Ib
6.0 - 9.0
- 58 -
-------
*BPT
BAT
New Sources
Parameter
PART 417 - SOAP
Subpart C
BOD5
COD
TSS
Oil & Grease
pH
Subpart D
BODS
COD
TSS
Oil & Grease
pH
Subpart E
BODS
COD
TSS
Oil & Grease
pH
**Corrected per
Daily
AND DETERGENT (Continued)
- Soap Manufacturing by Fatty
0.03 lb/1000 Ib **0
.15 lb/1000 Ib
.06 lb/1000 Ib
.03 lb/1000 Ib
6.0 - 9.0
30 Day
FINAL REGULATIONS,
Acid Neutralization
.01 lb/1000 Ib
.05 lb/1000 Ib
.02 lb/1000 Ib
.01 lb/1000 Ib
Daily
PUBLISHED 4/12/74,
Subcategory
0.02 lb/1000 Ib
.10 lb/1000 Ib
.04 lb/1000 Ib
.02 lb/1000 Ib
6.0
30 Day
EFFECTIVE 6/11/74
0.01 lb/1000 Ib
.05 lb/1000 Ib
.02 lb/1000 Ib
.01 lb/1000 Ib
- 9.0
Daily
0.02 lb/1000 Ib
.10 lb/1000 Ib
.04 lb/1000 Ib
.02 lb/1000 Ib
6.0 - 9.0
30 Day
0.01 lb/1000 Ib
.05 lb/1000 Ib
.02 lb/1000 Ib
.01 lb/1000 Ib
- Glycerine Concentration Subcateqory
4.50 lb/1000 Ib 1
13.50 lb/1000 Ib 4
.60 lb/1000 Ib
.30 lb/1000 Ib
6.0 - 9.0
.50 lb/1000 Ib
.50 lb/1000 Ib
.20 lb/1000 Ib
.10 lb/1000 Ib
0.80 lb/1000 Ib
2.40 lb/1000 Ib
.20 lb/1000 Ib
.08 lb/1000 Ib
6.0
0.40 lb/1000 Ib
1.20 lb/1000 Ib
.10 lb/1000 Ib
.04 lb/1000 Ib
- 9.0
0.80 lb/1000 Ib
2.40 lb/1000 Ib
.20 lb/1000 Ib
.08 lb/1000 Ib
6.0 - 9.0
0.40 lb/1000 Ib
1.20 lb/1000 Ib
.10 lb/1000 Ib
.01 lb/1000 Ib
- Glycerine Distillation Subcategory
1.50 lb/1000 Ib 0
4.50 lb/1000 Ib 1
.60 lb/1000 Ib
.30 lb/1000 Ib
6.0 - 9.0
39 FR 17841, May 21, 1974.
.50 lb/1000 Ib
.50 lb/1000 Ib
.20 lb/1000 Ib
.10 lb/1000 Ib
0.60 lb/1000 Ib
1.80 lb/1000 Ib
.08 lb/1000 Ib
.04 lb/1000 Ib
6.0
0.30 lb/1000 Ib
.90 lb/1000 Ib
.04 lb/1000 Ib
.02 lb/1000 Ib
- 9.0
0.60 lb/1000 Ib
1.80 lb/1000 Ib
.08 lb/1000 Ib
.04 lb/1000 Ib
6.0 - 9.0
0.30 lb/1000 Ib
.90 lb/1000 Ib
.04 lb/1000 Ib
.02 lb/1000 Ib
- 59 -
-------
*BPT
BAT
New Sources
Parameter
PART 417 - SOAP
Subpart F
BODS
COD
TSS
Oil & Grease
PH
Subpart G
BODS
COD
TSS
Oil & Grease
PH
Subpart H
BODS
COD
TSS
Oil & Grease
PH
Dajj^ 30 Day Daily
AND DETERGENT (Continued) FINAL REGULATIONS, PUBLISHED 4/12/74,
- Manufacture of
0.03 lb/1000 Ib
.15 lb/1000 Ib
.03 lb/1000 Ib
.03 lb/1000 Ib
6
- Manufacture of
1.02 lb/1000 Ib
2.55 lb/1000 Ib
1.74 lb/1000 Ib
.12 lb/1000 Ib
6
- Manufacture of
0.03 lb/1000 Ib
.15 lb/1000 Ib
.03 lb/1000 Ib
.03 lb/1000 Ib
6
Soap Flakes and Powders Subcateqory
0.01 lb/1000 Ib 0.
.05 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
.0 - 9.0
Bar Soaps Subcategory
0.34 lb/1000 Ib 0.
.85 lb/1000 Ib 1.
.58 lb/1000 Ib
.04 lb/1000 Ib
.0 - 9.0
Liquid Soaps Subcateqory
0.01 lb/1000 Ib 0.
.05 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
.0 - 9.0
02 lb/1000 Ib
10 lb/1000 Ib
02 lb/1000 Ib
02 lb/1000 Ib
6.0
40 lb/1000 Ib
20 lb/1000 Ib
68 lb/1000 Ib
06 lb/1000 Ib
6.0
02 lb/1000 Ib
10 lb/1000 Ib
02 lb/1000 Ib
02 lb/1000 Ib
6.0
30 Day
EFFECTIVE 6/11/74
0.01 lb/1000 Ib
.05 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
- 9.0
0.20 lb/1000 Ib
.60 lb/1000 Ib
.34 lb/1000 Ib
.03 lb/1000 Ib
- 9.0
0.01 lb/1000 Ib
.05 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
- 9.0
Da i 1 \
30 Dav
0.02 lb/1000 Ib
.10 lb/1000 Ib
.02 lb/1000 Ib
.02 lb/1000 Ib
6.0 - 9.0
0.40 lb/1000 Ib
1.20 lb/1000 Ib
.68 lb/1000 Ib
.06 lb/1000 Ib
6.0 - 9.0
0.02 lb/1000 Ib
.10 lb/1000 Ib
.02 lb/1000 Ib
.02 lb/1000 Ib
6.0 - 9.0
0.01 lb/1000 Ib
.05 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
0.20 lb/1000 Ib
.60 lb/1000 Ib
.34 lb/1000 Ib
.03 lb/1000 Ib
0.01 lb/1000 Ib
.05 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
- 60 -
-------
*BPT
Parameter Daily
PART 417 - SOAP AND DETERGENT (Continued)
30 Day
FINAL REGULATIONS,
BAT
Daily 30 Day
PUBLISHED 4/12/74. EFFECTIVE 6/11/74
New Sources
Daih
30 Dav
Subpart I - Oleum Sulfonation and Sulfation Subcategory
BODS
COD
TSS
Surfactants
Oil & Grease
PH
Subpart J
8005
COD
TSS
Surfactants
Oil & Grease
pH
Subpart K
BODS
COD
TSS
0.09 lb/1000 Ib
.40 lb/1000 Ib
.15 lb/1000 Ib
.15 lb/1000 Ib
.25 lb/1000 Ib
6.0 - 9.0
Air-S03 Sulfation and Sulfonation Subcategory
0.02 lb/1000 Ib
.09 lb/1000 Ib
.03 lb/1000 Ib
.03 lb/1000 Ib
.07 lb/1000 Ib
0.90 lb/1000 Ib
4.05 lb/1000 Ib
.09 lb/1000 Ib
.90 lb/1000 Ib
.15 lb/1000 Ib
6.0 - 9.0
S03 Solvent and Vacuum Sulfonation Subcategory
0.30 lb/1000 Ib
1.35 lb/1000 Ib
.03 lb/1000 Ib
.30 lb/1000 Ib
.05 lb/1000 Ib
0.90 lb/1000 Ib
3.05 lb/1000 Ib
.09 lb/1000 Ib
0.30 lb/1000 Ib
1.35 lb/1000 Ib
.03 lb/1000 Ib
0.07 lb/1000 Ib
.27 lb/1000 Ib
.09 lb/1000 Ib
.09 lb/1000 Ib
.21 lb/1000 Ib
0.02 lb/1000 Ib
.09 lb/1000 Ib
.03 lb/1000 Ib
.03 lb/1000 Ib
.07 lb/1000 Ib
6.0 - 9.0
0.30 lb/1000 Ib
1.10 lb/1000 Ib
.04 lb/1000 Ib
.36 lb/1000 Ib
.08 lb/1000 Ib
0.19 lb/1000 Ib
.55 lb/1000 Ib
.02 lb/1000 Ib
.18 lb/1000 Ib
.04 lb/1000 Ib
6.0 - 9.0
0.20 lb/1000 Ib
.90 lb/1000 Ib
.02 lb/1000 Ib
0.10 lb/1000 Ib
.45 lb/1000 Ib
.01 lb/1000 Ib
0.03 lb/1000 Ib
.09 lb/1000 Ib
.06 lb/1000 Ib
.03 lb/1000 Ib
.12 lb/1000 Ib
6.0 - 9.0
0.18 lb/1000 Ib
.80 lb/1000 Ib
.04 lb/1000 Ib
.18 lb/1000 Ib
.04 lb/1000 Ib
6.0 - 9.0
0.20 lb/1000 Ib
.90 lb/1000 Ib
.02 lb/1000 Ib
0.01 lb/1000 Ib
.03 lb/1000 Ib
.02 lb/1000 Ib
.01 lb/1000 Ib
.04 lb/1000 Ib
0.09 lb/1000 Ib
.40 lb/1000 Ib
.02 lb/1000 Ib
.09 lb/1000 Ib
.02 lb/1000 Ib
0.10 lb/1000 Ib
.45 lb/1000 Ib
.01 lb/1000 Ib
- 61 -
-------
Parameter
*BPT
BAT
PART 417 - SOAP AND DETERGENT (Continued) FINAL REGULATIONS, PUBLISHED 4/12/74, EFFECTIVE 6/11/74
Subpart K -
Surfactants
Oil & Grease
pH
Subpart L -
BODS
COD
TSS
Surfactants
Oil & Grease
pH
Subpart M -
BOD5
COD
TSS
Surfactants
Oil & Grease
pH
S03 Solvent and Vacuum
.90 lb/1000 Ib
.10 lb/1000 Ib
6.0 - 9
Sulfamic Acid Sulfation
0.90 lb/1000 Ib
4.05 lb/1000 Ib
.09 lb/1000 Ib
.90 lb/1000 Ib
.15 lb/1000 Ib
6.0 - 9.
Sulfonation Subcateqory
.30 lb/1000 Ib
.05 lb/1000 Ib
.0
Subcategory
0.30 lb/1000 Ib
1.35 lb/1000 Ib
.03 lb/1000 Ib
.30 lb/1000 Ib
.05 lb/1000 Ib
0
(Continued)
.20 lb/1000 Ib
.04 lb/1000 Ib
6.0 -
0.20 lb/1000 Ib
.90 lb/1000 Ib
.02 lb/1000 Ib
.20 lb/1000 Ib
.04 lb/1000 Ib
6.0
.10 lb/1000 Ib
.02 lb/1000 Ib
9.0
0.10 lb/1000 Ib
.45 lb/1000 Ib
.01 lb/1000 Ib
.10 lb/1000 Ib
.02 lb/1000 Ib
- 9.0
Chlorosulfonic Acid Sulfation Subcateqory
0.90 lb/1000 Ib
4.05 lb/1000 Ib
.09 lb/1000 Ib
.90 lb/1000 Ib
.15 lb/1000 Ib
6.0 - 9.
0.30 lb/1000 Ib
1.35 lb/1000 Ib
.03 lb/1000 Ib
.30 lb/1000 Ib
.05 lb/1000 Ib
0
0.30 lb/1000 Ib
1.50 lb/1000 Ib
.04 lb/1000 Ib
.30 lb/1000 Ib
.06 lb/1000 Ib
6.0
0.15 lb/1000 Ib
.75 lb/1000 Ib
.02 lb/1000 Ib
.15 lb/1000 Ib
.03 lb/1000 Ib
- 9.0
Daih
New Sources
30 Dav
0.20 lb/1000 Ib 0.10 lb/1000 Ib
.04 lb/1000 Ib .02 lb/1000 Ib
6.0 - 9.0
0.20 lb/1000 Ib
.90 lb/1000 Ib
.02 lb/1000 Ib
.20 lb/1000 Ib
.04 lb/1000 Ib
6.0 - 9.0
0.30 lb/1000 Ib
1.50 lb/1000 Ib
.04 lb/1000 Ib
.30 lb/1000 Ib
.06 lb/1000 Ib
6.0 - 9.0
0.10 lb/1000 Ib
.45 lb/1000 Ib
.01 lb/1000 Ib
.10 lb/1000 Ib
.02 lb/1000 Ib
0.15 lb/1000 Ib
.75 lb/1000 Ib
.02 lb/1000 Ib
.15 lb/1000 Ib
.03 lb/1000 Ib
- 62 -
-------
*BPT
BAT
New Sources
Parameter
Daily 30 Day Daily
PART 417 - SOAP AND DETERGENT (Continued) FINAL REGULATIONS, PUBLISHED 4/12/74, EFFECTIVE
Subpart
BODS
COD
TSS
Surfactants
Oil S Grease
pH
Subpart
(a) For
BODS
COD
TSS
Surfactants
Oil & Grease
pH
N - Neutralization of Sulfuric Acid Esters and Sulfonic
0.03 lb/1000 Ib 0.01 lb/1000 Ib 0.
.15 lb/1000 Ib .05 lb/1000 Ib
.09 lb/1000 Ib .03 lb/1000 Ib
.06 lb/1000 Ib .02 lb/1000 Ib
.03 lb/1000 Ib .01 lb/1000 Ib
6.0 - 9.0
0 - Manufacture of Spray Dried Detergents Subcateqory
normal operation of spray drying towers:
0.03 lb/1000 lo 0.01 lb/1000 Ib 0,
.15 lb/1000 Ib .05 lb/1000 Ib
.03 lb/1000 Ib .01 lb/1000 Ib
.05 lb/1000 Ib .02 lb/1000 Ib
.015 lb/1000 Ib .005 lb/1000 Ib
6.0 - 9.0
Acids Subcateqory
.02 lb/1000 Ib
.10 lb/1000 Ib
.06 lb/1000 Ib
.04 lb/1000 Ib
.02 lb/1000 Ib
6.0 - 9.
.02 lb/1000 Ib
.08 lb/1000 Ib
.04 lb/1000 Ib
.04 lb/1000 Ib
.01 lb/1000 Ib
6.0 - 9,
30^ Day
6/11/74
0.01 lb/1000 Ib
.05 lb/1000 Ib
.03 lb/1000 Ib
.02 lb/1000 Ib
.01 lb/1000 Ib
,0
0.01 lb/1000 Ib
• 04 lb/1000 Ib
.02 lb/1000 Ib
.02 lb/1000 Ib
.005 lb/1000 Ib
.0
Daily
0.02 lb/1000 Ib
.08 lb/1000 Ib
.06 lb/1000 Ib
.04 lb/1000 Ib
.02 lb/1000 Ib
6.0 -
0.02 lb/1000 Ib
.08 lb/1000 Ib
.04 lb/1000 Ib
.04 lb/1000 Ib
.01 lb/1000 Ib
6.0 -
30 D_a^
0.01 lb/1000 Ib
.04 lb/1000 Ib
.03 lb/1000 Ib
.02 lb/1000 Ib
.01 lb/1000 Ib
9.0
0.01 lb/1000 Ib
.04 lb/1000 Ib
.02 lb/1000 Ib
.02 lb/1000 Ib
.005 lb/1000 Ib
9.0
- 63 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Daily 30 Day Dally 30 Day
PART 417 - SOAP AND DETERGENT (Continued) FINAL REGULATIONS, PUBLISHED 4/12/74, EFFECTIVE 6/11/74
Subpart 0 - Manufacture of Spray Dried Detergents Subcategory (Continued)
(b) For air quality restricted operation of a spray drying tower, but only when a high rate of wet scrubbing is in operation which produces more
waste water than can be recycled to process, the following values pertain:
BOD5 0.24 lb/1000 Ib 0.08 1b/1000 Ib 0.12 lb/1000 Ib 0.06 lb/1000 Ib 0.12 lb/1000 Ib 0.06 lb/1000 Ib
COD 1.05 lb/1000 Ib .35 lb/1000 Ib .50 lb/1000 Ib .25 lb/1000 Ib .50 lb/1000 Ib .25 lb/1000 Ib
TSS .30 lb/1000 Ib .10 lb/1000 Ib .14 lb/1000 Ib .07 lb/1000 Ib -14 lb/1000 Ib .07 lb/1000 Ib
Surfactants .45 lb/1000 Ib .15 lb/1000 Ib .20 lb/1000 Ib .10 lb/1000 Ib .20 lb/1000 Ib .10 lb/1000 Ib
Oil & Grease .09 lb/1000 Ib .03 lb/1000 Ib .04 lb/1000 Ib .02 lb/1000 Ib .04 lb/1000 Ib .02 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(c) For fast turnaround operation of a spray tower, the following values pertain: The maximum for any one day when the number of turnarounds exceeds
six in any particular thirty consecutive day period shall be the sum of the appropriate value below and that from (a) or (b) of this section; and
the average of daily values for thirty consecutive days shall be the value shown below multiplied by the "rubber of turnarounds in excess of six
and prorated to thirty days plus the appropriate value from (a) or (b) of this_sectjon.
BOD5 0.02 lb/1000 Ib 0.02 lb/1000 Ib 0.02 lb/1000 Ib
COD .09 lb/1000 Ib .07 lb/1000 Ib .07 lb/1000 Ib
TSS .02 lb/1000 Ib .02 lb/1000 Ib .02 lb/1000 Ib
Surfactants .03 lb/1000 Ib .02 lb/1000 Ib .02 lb/1000 Ib
Oil & Grease .005 lb/1000 Ib .005 lb/1000 Ib .005 lb/1000 Ib
PH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
- 64 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Daily 30 Day Daily 30 Day
PART 417 - SOAP AND DETERGENT (Continued) FINAL REGULATIONS, PUBLISHED 4/12/74. EFFECTIVE 6/11/74
Subpart P - Manufacture of Liquid Detergents Subcategory
(a) For normal liquid detergent operations the following values pertain:
BODS 0.60 lb/1000 Ib 0.20 lb/1000 Ib 0.10 lb/1000 lb 0.05 lb/1000 Ib 0.10 lb/1000 Ib 0.05 lb/1000 Ib
COD **1.80 lb/1000 lb .60 lb/1000 lb .44 lb/1000 lb .22 lb/1000 lb .44 lb/1000 lb .22 lb/1000 lb
TSS .015 lb/1000 lb .005 lb/1000 Ib .01 lb/1000 lb .005 lb/1000 lb .01 lb/1000 lb .005 lb/1000 lb
Surfactants .39 lb/1000 lb .13 lb/1000 lb .10 lb/1000 lb .05 lb/1000 lb .10 lb/1000 lb .05 lb/1000 lb
Oil & Grease .015 lb/1000 lb .005 lb/1000 lb .01 lb/1000 lb .005 lb/1000 lb .01 lb/1000 lb .005 lb/1000 lb
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
(b) For fast turnaround operatior^of automated fill lines, the following values pertain: the maximum for any one day when the number of turnarounds
exceeds eight in any thirtyTonsecutiTe day period shall be the sum of the appropriate value below and that _from__(a)_of this__s_ectiQn; arxTthe
average of daily values for thirty consecutive days shall be the value shown below multiplied by the number of turnarounds in excess of eight
and prorated to thirty days plus the appropriate^ value_from Ca)_of_this section^
8005 0.05 lb/1000 lb 0.02 lb/1000 lb 0.02 lb/1000 lb
COD .15 lb/1000 lb .07 lb/1000 lb .07 lb/1000 lb
TSS .002 lb/1000 Ib .002 lb/1000 lb .002 lb/1000 lb
Surfactants .04 lb/1000 lb .02 lb/1000 lb .02 lb/1000 lb
Oil & Grease .002 lb/1000 lb .002 lb/1000 lb .002 lb/1000 lb
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
**Corrected per 39 FR 17841, May 21, 1974.
- 65 -
-------
*BPT
BAT
New Sources
Parameter
PART 417 - SOAP
Subpart Q
BODS
COD
TSS
Surfactants
Oil & Grease
pH
Subpart R
BOD5
COD
TSS
Surfactants
Oil & Grease
PH
Daily
AND DETERGENT (Continued)
- Manufacture of Detergents
0.03 lb/1000 Ib
.21 lb/1000 Ib
.03 lb/1000 Ib
.03 lb/1000 Ib
.015 lb/1000 Ib
6.0 - 9.0
- Manufacture of Drum Dried
0.03 lb/1000 Ib
.15 lb/1000 Ib
.03 lb/1000 Ib
.03 lb/1000 Ib
.03 lb/1000 Ib
6.0 - 9.0
30 Day
FINAL REGULATIONS,
Daily
PUBLISHED 4/12/74,
by Dry Blending Subcateqory
0.01 lb/1000 Ib
.07 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
.005 lb/1000 Ib
Detergents Subcategory
0.01 lb/1000 Ib
.05 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
0.02 lb/1000 Ib
.14 lb/1000 Ib
.02 lb/1000 Ib
.02 lb/1000 Ib
.01 lb/1000 Ib
0.02 lb/1000 Ib
.10 lb/1000 Ib
.02 lb/1000 Ib
.02 lb/1000 Ib
.02 lb/1000 Ib
6
30 Day
EFFECTIVE 6/11/74
0.01 lb/1000 Ib
.07 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
.005 lb/1000 Ib
6.0 - 9.0
0.01 lb/1000 Ib
.05 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
.0 - 9.0
Daily
0.02 lb/1000 Ib
.14 Ib/lCOO Ib
.02 lb/1000 Ib
.02 lb/1000 Ib
.01 lb/1000 Ib
6.0 -
0.02 lb/1000 Ib
.10 lb/1000 Ib
.02 lb/1000 Ib
.02 lb/1000 Ib
.02 lb/1000 Ib
6.0 -
3JO Day
0.01 lb/1000 Ib
.07 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
.005 lb/1000 Ib
9.0
0.01 lb/1000 Ib
.05 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
.01 lb/1000 Ib
9.0
- 66 -
-------
*BPT
BAT
Parameter
Dails
New Sources
Dail\
30 Day
PART 417 - SOAP
Subpart S -
BODS
COD
TSS
Surfactants
Oil & Grease
PH
AND DETERGENT (Continued)
Manufacture of Detergent
2.10 lb/1000 Ib
9.90 lb/1000 Ib
.60 lb/1000 Ib
1.50 lb/1000 Ib
.06 lb/1000 Ib
6.0 - 9.
FINAL REGULATIONS, PUBLISHED 4/12/74,
Bars and Cakes
0.70 lb/1000
3.30 lb/1000
.30 lb/1000
.50 lb/1000
.02 lb/1000
0
Subcateqory
Ib 0
Ib 2
Ib
Ib
Ib
.60 lb/1000 Ib
.70 lb/1000 Ib
.20 lb/1000 Ib
.40 lb/1000 Ib
.04 lb/1000 Ib
6
EFFECTIVE 6/11/74
0.30
1.35
.10
.20
.02
.0 - 9.0
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
0.60
2.70
.20
.40
.04
lb/1000
lb/1000
lb/1000
lb/1000
lb/1000
Ib
Ib
Ib
Ib
Ib
6.0 -
0.30
1.35
.10
.20
.02
9.0
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
- 67 -
-------
*BPT
BAT
New Sources
Parameter
PART 418 - FERTILIZER MANUFACTURING
Subpart A - Phosphate Subcategory
30 Day Daily 30 Day Daily 30 Day
FINAL REGULATIONS. PUBLISHED 4/8/74, EFFECTIVE 6/7/74 (All references to lb/1000 1b are to 1000 Ib of product)
(a) Subject to the provisions of paragraphs
(b), (c), and (d) of this section, there
shall be no discharge of process waste
water pollutants into navigable waters.
(b) A process waste water impoundment which
is designed, constructed and operated so as
to contain the precipitation from the 10
year, 24 hour rainfall event as established
by the National Climatic Center, National
Oceanic and Atmospheric Administration,
for the area in which such impoundment is
located may discharge that volume of
process waste water which is equivalent
to the volume of precipitation that falls
within the impoundment in excess of that
attributable to the 10 year, 24 hour rainfall
event, when such event occurs.
(c) During any calendar month there may be
discharged from a process waste water
impoundment either a volume of process waste
water equal to the difference between the
precipitation for that month that falls
within the impoundment and the evaporation
within the impoundment for that month, or,
if greater, a volume of process waste
water equal to the difference between the
mean precipitation for that month that
falls within the impoundment and the mean
evaporation for that month as established
by the National Climatic Center, National
Oceanic and Atmospheric Administration,
for the area in which such impoundment is
located (or as otherwise determined if no
monthly data have been established by
the National Climatic Center).
(a) Subject to the provisions of paragraph (a) Subject to the provisions of paragraph
(b) of this section there shall be no discharge (b) of this section, there shall be no
of process waste water pollutants into discharge of process waste water pollutants
navigable waters. into navigable waters.
(b) A process waste water impoundment which is
designed, constructed, and operated so as to
contain the precipitation from the 25 year,
24 hour rainfall event as established by the
National Climatic Center, National Oceanic
and Atmospheric Administration, f.or the area
in which such impoundment is located may dis-
charge that volume of process waste water
which is equivalent to the volume of precipita-
tion that falls within the impoundment in
excess of that attributable to the 25 yea_r.
24 hour rainfall event, when such event occurs.
(b) A process waste water impoundment which
is designed, constructed, and operated
so as to contain the precipitation from the
2JLyear, 24 hour rainfall event as established
bythe National Climatic Center, National
Oceanic Atmospheric Administration, for
the area in which such impoundment is
located may discharge that volume of
process waste water which is equivalent
to the volume of precipitation that falls
within the impoundment in excess of that
attributable to the 25 year, 24 hour rain-
fall event, when such event occurs.
- 68 -
-------
Total
Phosphorus
Fluoride
TSS
pH
Subpart B
70 ppm
30 ppm
50 ppm
8
- Ammonia
.0 - 9.5
Subcategory
*BPT BAT New Sources
Parameter Daily 30 Day Daily 30 Day Daily
PART 418 - FERTILIZER MANUFACTURING (Continued^ FINAL REGULATIONS, PUBLISHED 4/8/74, EFFECTIVE 6/7/74
Subpart A - Phosphate Subcategory (Continued)
(d) Any process waste water discharged pursuant
to paragraph (c) of this section shall comply
with each of the following requirements:
35 ppm
15 ppm
25 ppm
Ammonia 0.125 lb/1000 lb 0.0625 lb/1000 Ib 0.05 lb/1000 Ib 0.025 lb/1000 Ib 0.11 lb/1000 Ib 0.055 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
Subpart C - Urea Subcategory
(a)Limitations for maximum permissible discharge for urea manufacturing operations in which urea is not prilled:
Ammonia 0.075 lb/1000 Ib 0.0375 lb/1000 lb 0.03 lb/1000 lb 0.015 lb/1000 lb 0.065 lb/1000 lb 0.0325 lb/1000 lb
Organic Nitrogen**44 lb/1000 Ib **0.175 lb/1000 lb .05 lb/1000 lb .025 lb/1000 lb **.24 lb/1000 lb **,12 lb/1000 lb
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
**Corrected per 39 FR 24490, July 2, 1974.
- 69 -
-------
*BPT
BAT
Parameter Dai 1^ 30 Day Daily 30 Day
PART 418 - FERTILIZER MANUFACTURING (Continued) FINAL REGULATIONS, PUBLISHED 4/8/74. EFFECTIVE 6/7/74
New Sources
30 Dav
Subpart C - Urea Subcateqory (Continued)
(b) Limitations for maximum permissible discharge for urea manufacturing operations in which urea isjarilled:
Ammonia 0.1 lb/1000 Ib 0.05 lb/1000 Ib 0.03 lb/1000 Ib 0.015 lb/1000 Ib 0.065 lb/1000 Ib
Organic Nitrogen**!.25 lb/1000 Ib **.5 lb/1000 Ib .075 lb/1000 Ib .0375 lb/1000 Ib **.7 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
Subpart D - Ammonium Nitrate Subcategory
(a) Ljmitations forjoaximum permissible discharge for ammonium nitrate manufacturing operations in which ammonium nitrate is produced as an
aqueous solution:
Ammonia 0.075 lb/1000 Ib 0.0375 lb/1000 Ib
Nitrate .1 lb/1000 Ib .05 lb/1000 Ib
pH 6.0 - 9.0
0.0325 lb/1000 Ib
*.35 lb/1000 Ib
0.015 lb/1000 Ib 0.0075 lb/1000 Ib
.025 lb/1000 Ib .0125 lb/1000 Ib
6.0 - 9.0
0.05 lb/1000 Ib 0.025 lb/1000 Ib
.025 lb/1000 Ib .0125 lb/1000 Ib
6.0 - 9.0
(b) Limitations for maximum permissible discharge for ammonium nitrate manufacturing operations In which ammonium nitrate is prilled or granulated:
Ammonia 0.2 lb/1000 Ib 0.1 lb/1000 Ib
Nitrate .22 lb/1000 Ib .11 lb/1000 Ib
pH 6.0 - 9.0
Subpart E - Nitric Acid Subcategory
There shall be no discharge of process waste
water pollutants into navigable waters.
**Corrected per 39 FR 24490, July 2, 1974.
0.015 lb/1000 Ib 0.0075 lb/1000 Ib
.025 lb/1000 Ib .0125 lb/1000 Ib
6.0 - 9.0
0.1 lb/1000 Ib 0.25 lb/1000 Ib
.05 lb/1000 Ib .025 lb/1000 Ib
6.0 - 9.0
There shall be no discharge of process waste There shall be no discharge of process waste
water pollutants into navigable waters. water pollutants into navigable waters.
- 70 -
-------
Parameter
Daih
*BPT
3D Day Dail
BAT
30 Da\
Daih
New Sources
Total Chromium
Hexavalent
Chromium
PH
.122 lb/1000 bbl
feedstock
.0025 lb/1000 bbl
feedstock
.071 lb/1000 bbl
feedstock
.0011 lb/1000 bbl
feedstock
.044 lb/1000 bbl
feedstock
.00097 lb/1000 bbl
feedstock
.037 lb/1000 bbl
feedstock
.00062 lb/1000 bbl
feedstock
.064 lb/1000 bbl
feedstock
.0013 lb/1000 bbl
feedstock
30 Dav
PART 419 - PETROLEUM REFINING FINAL REGULATIONS, PUBLISHED 5/9/74, EFFECTIVE 5/12/74
Subpart A
(a)
BOD5
TSS
COD**
Oil & Grease
Phenolic
Compounds
Ammonia as N
Sulfide
- Topping Subcategory
8.0 lb/1000 bbl
feedstock
4.9 lb/1000 bbl
feedstock
41.2 lb/1000 bbl
feedstock
2.5 lb/1000 bbl
feedstock
.060 lb/1000 bbl
feedstock
.99 lb/1000 bbl
feedstock
.053 lb/1000 bbl
feedstock
4.25 lb/1000 bbl
feedstock
2.9 lb/1000 bbl
feedstock
21.3 lb/1000 bbl
feedstock
1.3 lb/1000 bbl
feedstock
.027 lb/1000 bbl
feedstock
.45 lb/1000 bbl
feedstock
.024 lb/1000 bbl
feedstock
0.92 lb/1000 bbl
feedstock
.88 lb/1000 bbl
feedstock
3.5 lb/1000 bbl
feedstock
.18 lb/1000 bbl
feedstock
.0043 lb/1000 bbl
feedstock
.24 lb/1000 Bbl
feedstock
.019 lb/1000 bbl
feedstock
0.75 lb/1000 bbl
feedstock
.75 lb/1000 bbl
feedstock
2.8 lb/1000 bbl
feedstock
.14 lb/1000 bbl
feedstock
.0031 lb/1000 bbl
feedstock
.18 lb/1000 bbl
feedstock
.015 lb/1000 bbl
feedstock
4.2 lb/1000 bbl
feedstock
2.6 lb/1000 bbl
feedstock
21.7 lb/1000 bbl
feedstock
1.3 lb/1000 bbl
feedstock
.031 lb/1000 bbl
feedstock
1.0 lb/1000 bbl
feedstock
.027 lb/1000 bbl
feedstock
2.2 lb/1000 bbl
feedstock
1.5 lb/1000 bbl
feedstock
11.2 lb/1000 bbl
feedstock
.70 lb/1000 bbl
feedstock
.016 lb/1000 bbl
feedstock
.45 lb/1000 bbl
feedstock
.012 lb/1000 bbl
feedstock
.037 lb/1000 bbl
feedstock
.00062 lb/1000 bbl
feedstock
6.0 - 9.0
6.0 - 9.0
6.0 - 9.0
**In any case in which the applicant can demonstrate that the chloride ion concentration in the effluent exceeds 1000 mg/1 (1000 ppm), the Regional Adminis-
trator may substitute TOC as a parameter in lieu of COD. Effluent limitations for TOC shall be based on effluent data from the plant correlating TOC
to BOD5. If in the judgment of the Regional Administrator, adequate correlation data are not available, the effluent limitations for TOC shall be
established at a ratio of 2.2 to 1 to the applicable effluent limitations on BODS.
- 71 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Dally 30 Day Dally 30 Day
PART 419 - PETROLEUM REFINING (Continued) FINAL REGULATIONS, PUBLISHED 5/9/74, EFFECTIVE 5/12/74
Subpart A - Topping Subcategory (Continued)
(b) The limits set forth in (a) are to be multiplied by the following factors to calculate the maximum for any one day and maximum average of daily
values for thirty consecutive days. (Applies to BPT, BAT and New Sources)
(1) Size factor.
1.000 barrels feedstock per stream day Size factor
0 to 49.9 1.02
50 to 99.9 1.21
100 to 149.9 1.44
150 or greater 1.57
(2) Process factor
Process configuration Process factor
1.0 to 3.99 0.60
4.0 to 6.99 1.00
7.0 to 9.99 1.66
10.0 to 12.99 2.77
13.0 to 15.0 or greater 4.09
(c) The following allocations apply in addition to the discharge allowed by (b).
(1) RUNOFF. The allocation allowed for storm runoff flow, as kg/cu m (Ib/m gal), shall be based solely on that storm flow (process area runoff)
which is treated in the main treatment system. All additional storm runoff (from tank fields and non-process areas), that has been segregated
from the main waste stream for discharge, shall not exceed a concentration of 35 rog/1 of TOC or 15 mg/1 of oil and grease when discharged.
- 72 -
-------
Parameter
Dail
PART 419 - PETROLEUM REFINING (Continued)
Subpart A - Topping Subcategory (Continued)
BODS 0.40 lb/1000 gal flow
TSS .24 lb/1000 gal flow
COD**
Oil & Grease
*BPT BAT
30 Day Daily 3D Day
FINAL REGULATIONS, PUBLISHED 5/9/74. EFFECTIVE 5/12/74
New Sources
Dail
30 Da
0.21 lb/1000 gal flow 0.088 lb/1000 gal flow 0.071 lb/1000 gal flow 0.40 lb/1000 gal flow 0.21 lb/1000 gal
flow
.14 lb/1000 gal flow .084 lb/1000 gal flow .071 lb/1000 gal flow .24 lb/1000 gal flow .14 lb/1000 gal
flow
3.1 lb/1000 gal flow 1.6 lb/1000 gal flow .24 lb/1000 gal flow .19 lb/1000 gal flow 3.1 lb/1000 gal flow 1.6 lb/1000 gal
flow
.126 lb/1000 gal flow .067 lb/1000 gal flow .018 lb/1000 gal flow .014 lb/1000 gal flow .126 lb/1000 gal flow .067 lb/1000 gal
flow
6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
pH
(2) BALLAST. The allocation allowed for ballast water flow, as kg/cu m (Ib/Mgal), shall be based on those ballast waters treated at the refinery.
BOD5
TSS
C°D**
Oil & Grease
PH
°'40 lb/100° 9al flow °'21 lb/1000 9al fl°w 0.088 lb/1000 gal flow 0.071 lb/1000 gal flow 0.40 lb/1000 gal flow 0.21 lb/1000 gal
"2/l lb/100° 9al flow -14 lb/1000 9a1 flow .084 lb/1000 gal flow .071 lb/1000 gal flow .24 lb/1000 gal flow .14 lb/1000 gal"
3'9 lb/100° fal flow 2'° lb/10°° 9*1 "ow .32 lb/1000 gal flow .26 lb/1000 gal flow 3.9 lb/1000 gal flow 2.0 lb/1000 gaT*
.126 lb/1000 gal flow .067 lb/1000 gal flow .018 lb/1000 gal flow .014 lb/1000 gal flow .126 lb/1000 gal flow .067 Ib/lOOO^al
6-°^-° 6.0-9.0
6.0-g.o
I«lS2dtfJLa?!pqdf1£y °f
not !o exceeS 5 Jg/1 ^
?up°l1i!!:ant Prc"?erties controlled by this section, attributable to once-through cooling water, are
(b) °f 1S SeCtl°n' Once"throu9h Coolin9 water may be discharged with a total organic carbon concentration
TOC t BOD5 fi
established at a JJtS of
estaonsnea at a ratio of
"" demonstrate ,that the M(>r^ ™" concentration in the effluent exceeds 1000 nig/1 (1000 ppm). the Regional
"f th^r"^! 'V - f C°D< "f]wni limitations for TOC shall be based on effluent data fS the plant correlating
? M fh 91°?-1 ^minl^^tor adequate correlation data are not available, the effluent limitations for TOC shall be
to 1 to the applicable effluent limitations on BODS.
- 73 -
-------
*BPT
Parameter
Dailj
PART 419 - PETROLEUM REFINING (Continued)
30 Da
FINAL REGULATIONS,
BAT
Daily 30 Da;y
PUBLISHED 5/9774, EFFECTIVE 5/12/74
Dailj
New Sources
30 Da\
Subpart B -
(a)
BOD5
TSS
COD**
Oil & Grease
Phenolic
Compounds
Ammonia as N
Sulfide
Total Chromium
Hexavalent
Chromium
Cracking Subcategory
9.9 lb/1000 bbl
feedstock
6.1 lb/1000 bbl
feedstock
74 lb/1000 bbl
feedstock
3.0 lb/1000 bbl
feedstock
.074 lb/1000 bbl
feedstock
6.6 lb/1000 bbl
feedstock
.065 lb/1000 bbl
feedstock
.15 lb/1000 bbl
feedstock
.0031 lb/1000 bbl
feedstock
5.5 lb/1000 bbl
feedstock
3.6 lb/1000 bbl
feedstock
38.4 lb/1000 bbl
feedstock
1.6 lb/1000 bbl
feedstock
.036 lb/1000 bbl
feedstock
3.0 lb/1000 bbl
feedstock
.029 lb/1000 bbl
feedstock
.088 lb/1000 bbl
feedstock
.0014 lb/1000 bbl
feedstock
1.2 lb/1000 bbl
feedstock
1.2 lb/1000 bbl
feedstock
6.8 lb/1000 bbl
feedstock
.24 lb/1000 bbl
feedstock
.0055 lb/1000 bbl
feedstock
1.6 lb/1000 bbl
feedstock
.026 lb/1000 bbl
feedstock
.058 lb/1000 bbl
feedstock
.0013 lb/1000 bbl
feedstock
0.99 lb/1000 bbl
feedstock
0.99 lb/1000 bbl
feedstock
5.4 lb/1000 bbl
feedstock
.19 lb/1000 bbl
feedstock
.0039 lb/1000 bbl
feedstock
1.2 lb/1000 bbl
feedstock
.017 lb/1000 bbl
feedstock
.049 lb/1000 bbl
feedstock
.0008 lb/1000 bbl
feedstock
5.8 lb/1000 bbl
feedstock
3.5 lb/1000 bbl
feedstock
41.5 lb/1000 bbl
feedstock
1.7 lb/1000 bbl
feedstock
.042 lb/1000 bbl
feedstock
6.6 lb/1000 bbl
feedstock
.037 lb/1000 bbl
feedstock
.084 lb/1000 bbl
feedstock
.0018 lb/1000 bbl
feedstock
3.1 lb/1000 bbl
feedstock
2.0 lb/1000 bbl
feedstock
21.0 lb/1000 bbl
feedstock
.93 lb/1000 bbl
feedstock
.020 lb/1000 bbl
feedstock
3.0 lb/1000 bbl
feedstock
.017 lb/1000 bbl
feedstock
.049 lb/1000 bbl
feedstock
.00081 lb/1000
bbl feedstock
PH
6.0 - 9.0
6.0 - 9.0
6.0 - 9.0
**In any case in which the applicant can demonstrate that the chloride ion concentration in the effluent exceeds 1,000 mg/1 (1,000 ppm), the Regional
Administrator may substitute TOC as a parameter in lieu of COD. Effluent limitations for TOC shall be based on effluent data from the plant correlating
the ^^ limitati°nS f°r T°C Sha11 be
- 74 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Djily 30 Day Daily 30 Day
PART 419 - PETROLEUM REFINING (Continued) FINAL REGULATIONS, PUBLISHED 5/9/74, EFFECTIVE 5/12/74
Subpart B - Cracking Subcategory (Continued)
(b) The limits set forth in (a) are to be multiplied by the following factors to calculate the maximum for any one day and maximum average of daily
values for thirty consecutive days. (Applies to BPT, BAT and New Sources)
(1 ) Size factor.
1,000 barrels feedstock per stream day Size factor
0 to 34.9 0.89
35 to 74.9 1.00
75 to 109.9 1-14
110 to 149.9 1.31
150 or greater 1.41
(2) Process factor
Process configuration Process factor
1.5 to 3.49 0.58
3.50 to 5.49 0.81
5.50 to 7.49 1.13
7.50 to 9.49 1-60
9.50 to 10.50 or greater 1.87
(c) The provisions of Subpart A (c) (1) and (2) apply to discharges of process waste water pollutants attributable to storm water runoff and ballast
water by a point source subject to the provisions of this subpart.
? T^^ pro?6rties Controlled by this paragraph, attributable to once-through cooling water, are
* ™ ^^ ^^ Doling water may be discharged a total organic carbon concentration
Sg/l \
- 75 -
-------
*BPT
BAT
New Sources
Parameter
Daili
PART 419 - PETROLEUM REFINING (Continued)
Subpart C - Petrochemical Subcategor.y
(a)
BODS
TSS
COD**
Oil & Grease
Phenolic
Compounds
Ammonia as N
Sulfide
Total Chromium
Hexavalent
Chromium
12.1 lb/1000 bbl
feedstock
7.3 lb/1000 bbl
feedstock
74 lb/1000 bbl
feedstock
3.9 lb/1000 bbl
feedstock
.088 lb/1000 bbl
feedstock
8.25 lb/1000 bbl
feedstock
.078 lb/1000 bbl
feedstock
.183 lb/1000 bbl
feedstock
.0040 lb/1000 bbl
feedstock
38
2
30 Day
FINAL REGULATIONS,
5 lb/1000 bbl
feedstock
25 lb/1000 bbl
feedstock
4 lb/1000 bbl
feedstock
1 lb/1000 bbl
feedstock
0425 lb/1000 bbl
feedstock
8 lb/1000 bbl
feedstock
035 lb/1000 bbl
feedstock
107 lb/1000 bbl
feedstock
0018 lb/1000 bbl
feedstock
Daj_1.y
PUBLISHED 5/9/74, EFFECTIVE
1.7 lb/1000 bbl
feedstock
1.6 lb/1000 bbl
feedstock
7.6 lb/1000 bbl
feedstock
.32 lb/1000 bbl
feedstock
.0077 lb/1000 bbl
feedstock
2.0 lb/1000 bbl
feedstock
.035 lb/1000 bbl
feedstock
.080 lb/1000 bbl
feedstock
.0017 lb/1000 bbl
feedstock
30 Day
5/12/74
1.3 lb/1000 hhl
feedstock
1.3 lb/1000 bbl
feedstock
6.1 lb/1000 bbl
feedstock
.26 lb/1000 bbl
feedstock
.0054 lb/1000 bbl
feedstock
1.5 lb/1000 bbl
feedstock
.022 lb/1000 bbl
feedstock
.068 lb/1000 bbl
feedstock
.0011 lb/1000 bbl
feedstock
Daily
7.7 lb/1000 bbl
feedstock
4.6 lb/1000 bbl
feedstock
47 lb/1000 bbl
feedstock
2.4 lb/1000 bbl
feedstock
.056 lb/1000 bbl
feedstock
8,3 lb/1000 bbl
feedstock
.050 lb/1000 bbl
feedstock
.116 lb/1000 bbl
feedstock
.0024 lb/1000 bbl
feedstock
30 Day
4.1 lb/1000 bbl
feedstock
2.7 lb/1000 bbl
feedstock
24 lb/1000 bbl
feedstock
1.3 lb/1000 bbl
feedstock
.027 lb/1000 bbl
feedstock
3.8 lb/1000 bbl
feedstock
.022 lb/1000
bbl feedstock
.068 lb/1000
bbl feedstock
.0011 lb/1000
bbl feedstock
6.0 - 9.0
6.0 - 9.0
6.0 - 9.0
**In any case in which the applicant can demonstrate that the chloride ion concentration in the effluent exceeds 1,000 rag/1 (1,000 ppm), the Regional
Administrator may substitute TOC as a parameter in lieu of COD. Effluent limitations for TOC shall be based on effluent data from the plant correlating
TOC to BOD5. If in the judgement of the Regional Administrator, adequate correlation data are not availbulc, tite effluent limitations for TnC shall be
established at a ratio of 2.2 to 1 to the applicable effluent limitations on BOD5.
- 76 -
-------
*BPT BAT Hew Sources
Parameter Dally 30 Pay Daily 30 Day Daily 30 Day
PART 419 - PETROLEUM REFINING (Continued) FINAL REGULATIONS, PUBLISHED 5/9/74, EFFECTIVE 5/12/74
Subpart C - Petrochemical Subcategory (Continued)
(b) The limits set forth in (a) are to be multiplied by the following factors to calculate the maximum for any one day and maximum average of daily
values for thirty consecutive days. (Applies to BPT, BAT and New Sources)
(1) Size factor.
1,000 barrels feedstock per stream day Size factor
0 to 49.9 0.73
50 to 99.9 .87
100 to 149.9 1.04
150 or greater 1.13
(2) Process factor
Process configuration Process factor
3.25 to 4.74 0.67
4.75 to 6.74 .91
6.75 to 8.74 1.27
8.75 to 10.25 or greater 1.64
(c) The provisions of Subpart A (c) (1) and (2) apply to discharges of process waste water pollutants attributable to storm water runoff and ballast
water by a point source subject to the provisions of this subpart.
(d) The quantity and quality of pollutants or pollutant properties controlled by this paragraph, attributable to once-through cooling water, are
excluded from the discharge allowed by (b) of this section. Once-through cooling water may be discharged with a total organic carbon concentration
not to exceed 5 mg/1.
- 77 -
-------
*BPT
BAT
New Sources
Parameter Daily
Daih
30 Daj
PART 419 - PETROLEUM
Subpart D - Lube
(a)
BOOS 17.
TSS 11.
COD** 127
Oil & Grease 5.
Phenolic
Compounds
Ammonia as N 8.
Sulfide
Total Chromium
Hexavalent
Chromium
REFINING (Continued)
Subcategory
9 lb/1000 bbl
feedstock
0 lb/1000 bbl
feedstock
lb/1000 bbl
feedstock
7 lb/1000 bbl
feedstock
133 lb/1000 bbl
feedstock
3 lb/1000 bbl
feedstock
118 lb/1000 bbl
feedstock
273 lb/1000 bbl
feedstock
0059 lb/1000 bbl
feedstock
FINAL REGULATIONS,
9.1 lb/1000 bbl
feedstock
6.5 lb/1000 bbl
feedstock
66 lb/1000 bbl
feedstock
3.0 lb/1000 bbl
feedstock
.065 lb/1000 bbl
feedstock
3.8 lb/1000 bbl
feedstock
.053 lb/1000 bbl
feedstock
.160 lb/1000 bbl
feedstock
.0027 lb/1000 bbl
feedstock
PUBLISHED 5/9/74, EFFECTIVE
2.7 lb/1000 bbl 2
feedstock
2.6 lb/1000 bbl 2
feedstock
13.8 lb/1000 bbl 11
feedstock
.50 lb/1000 bbl
feedstock
.012 lb/1000 bbl
feedstock
2.0 lb/1000 bbl 1
feedstock
.055 lb/1000 bbl
feedstock
.13 lb/1000 bbl
feedstock
.0029 lb/1000 bbl
feedstock
5/12/74
.2 lb/1000 bbl
feedstock
.2 lb/1000 bbl
feedstock
.0 lb/1000 bbl
feedstock
.40 lb/1000 bbl
feedstock
.0087 lb/1000 bbl
feedstock
.5 lb/1000 bbl
feedstock
.035 lb/1000 bbl
feedstock
.11 lb/1000 bbl
feedstock
.0018 lb/1000 bbl
feedstock
pH
6.0 - 9.0
6.0 - 9.0
12.2 lb/1000 bbl
feedstock
7.3 lb/1000 bbl
feedstock
87.0 lb/1000 bbl
feedstock
3.8 lb/1000 bbl
feedstock
.088 lb/1000 bbl
feedstock
8.3 lb/1000 bbl
feedstock
.078 lb/1000 bb!
feedstock
.180 lb/1000 bbl
feedstock
.0056 lb/1000 bbl
feedstock
6.5 lb/1000 bbl
feedstock
4.3 lb/1000 bbl
feedstock
45.0 lb/1000 bbl
feedstock
2.0 lb/1000 bbl
feedstock
.043 lb/1000 bbl
feedstock
3.8 lb/1000 bbl
feedstock
.035 lb/1000 bbl
feedstock
.105 lb/1000 bbl
feedstock
.0018 lb/1000
bbl feedstock
6.0 - 9.0
**In any case in which the applicant can demonstrate that the chloride ion concentration in the effluent exceeds 1,000 mg/1 (1,000 ppm), the Regional
Administrator may substitute TOC as a parameter in lieu of COD. Effluent limitations for TOC shall be based on effluent data from the plant correlating
TOC to B005. If in the judgement of the Regional Administrator, adequate correlation data are not available, the effluent limitations for TOC shall be
established at a ratio of 2.2 to 1 to the applicable effluent limitations on BODS.
- 78 -
-------
*BPT
Parameter
Daih
PART 419 - PETROLEUM REFINING (Continued)
Subpart 0 - Lube Subcategory (Continued)
BAT
30 Day Daily ' 30 Day
FINAL REGULATIONS, PUBLISHED 5/9/74, EFFECTIVE 5/12/74
(Mil
New Sources
30 Dav
(b) The limits set forth in (a) of this section are to be multiplied by the following factors to calculate the maximum for any one day and maximum
average of daily values for thirty consecutive days. (Applies to BPT, BAT and New Sources)
(1) Size factor
1,000 barrels of feedstock per stream day
30 to 69.9
70 to 109.9
110 to 149.9
150 to 199.9
200 or greater
(2) Process factor
Process configuration
6.0 or less to 7.99
8.0 to 9.99
10.0 to 11.99
12.0 to 14.0 or greater
Size factor
0.71
0.81
0.93
1.09
1.19
Process factor
0.88
1.23
1.74
2.44
- 79 -
-------
Pararneter flail* ~ 30** DaiJl *~ 30^ D.J1* ^^^ 30 Day
PART 419 - PETROLEUM REFINING (Continued) FINAL REGULATIONS, PUBLISHED 5/9/74t EFFECTIVE 5/12/74
Subpart 0 - Lube Subcategory (Continued)
(3) Example of the application of the above factors.
Calculation of the process configuration
Process
Category Processes included Weighting factor;
Crude Atm. crude distillation 1
Vacuum crude distillation
Desalting
Cracking Fluid cat. cracking 6
and Vis-breaking
Coking
Thermal cracking.
Moving bed cat. cracking.
Hydrocracking.
Fluid coking.
Delayed coking.
Lube Further defined in the de-
velopment document. 13
Asphalt Asphalt production 12
Asphalt oxidation
Asphalt emulsifying.
(c) The provisions of Subpart A (c) (1) and (2) apply to discharges of process waste water pollutants attributable to storm water runoff and ballast
water by a point source subject to the provisions of this subpart.
(d) The quantity and quality of pollutants or pollutant properties controlled by this paragraph, attributable to once-through cooling water, are
excluded from the discharge allowed by (b) of this section. Once-through cooling water may be discharged with a total organic carbon concentra-
tion not to exceed 5 mg/1.
- 80 -
-------
*BPT
Parameter
Dai1;s
PART 419 - PETROLEUM REFINING (Continued)
BAT
30 Day Daily 30
FINAL REGULATIONS, PUBLISHED 5/9/74, EFFECTIVE 5/12/74
New Sources
Daih
30 Das
Subpart E -
(a)
BOOB
TSS
COO**
Oil & Grease
Phenolic
Compounds
Ammonia as N
Sulfide
Total Chromium
Hexavalent
Chromium
Integrated Subcategory
19.2 lb/1000 bbl
feedstock
11.6 Ib/lOOC bbl
feedstock
136.0 lb/1000 bbl
feedstock
6.0 lb/1000 bbl
feedstock
.14 lb/1000 bbl
feedstock
8.3 lb/1000 obi
feedstock
.124 lb/1000 bbl
feedstock
.29 lb/1000 bbl
feedstock
.0062 lb/1000 bbl
feedstock
10.2 lb/1000 bbl
feedstock
6.8 lb/1000 bbl
feedstock
70.0 lb/1000 bbl
feedstock
3.2 lb/1000 bbl
feedstock
.068 lb/1000 bbl
feedstock
3.8 lb/1000 bbl
feedstock
.056 lb/1000 bbl
feedstock
.17 lb/1000 bbl
feedstock
.0028 lb/1000 bbl
feedstock
3.2 lb/1000 bbl
feedstock
3.0 lb/1000 bbl
feedstock
16.8 lb/1000 bbl
feedstock
.60 lb/1000 bbl
feedstock
.015 lb/1000 bbl
feedstock
2.0 lb/1000 bbl
feedstock
.066 lb/1000 bbl
feedstock
.15 lb/1000 bbl
feedstock
.0033 lb/1000 bbl
feedstock
2.6 lb/1000 bbl
feedstock
2.6 lb/1000 bbl
feedstock
13.4 lb/1000 bbl
feedstock
.48 lb/1000 bbl
feedstock
.010 lb/1000 bbl
feedstock
1.5 lb/1000 bbl
feedstock
.042 lb/1000 bbl
feedstock
.13 lb/1000 bbl
feedstock
.0021 lb/1000 bbl
feedstock
14.7 lb/1000 bbl
feedstock
8.7 lb/1000 bbl
feedstock
104.0 lb/1000 bbl
feedstock
4.5 lb/1000 bbl
feedstock
.105 lb/1000 bbl
feedstock
8.3 lb/1000 bbl
feedstock
.093 lb/1000 bbl
feedstock
.220 lb/1000 bbl
feedstock
.0047 lb/1000 bbl
feedstock
7.8 lb/1000 bbl
feedstock
5.1 lb/1000 bbl
feedstock
54.0 lb/1000 bbl
feedstock
2.4 lb/1000 bbl
feedstock
.051 lb/1000 bbl
feedstock
3.8 lb/1000 bbl
feedstock
.042 lb/1000 bbl
feedstock
.13 lb/1000 bbl
feedstock
.0021 lb/1000
bbl feedstock
PH
6.0 - 9.0
6.0 - 9.0
6.0 - 9.0
**In any case in which the applicant can demonstrate that the chloride ion concentration in the effluent exceeds 1,000 mg/1 (1,000 ppm), the Regional
Administrator may substitute TOC as a parameter in lieu of COD. Effluent limitations for TOC shall be based on effluent data from the plant correlating
TOC to BODS. If in the judgment of the Regional Administrator, adequate correlation data are not available, the effluent limitations for TOC shall be
established at a ratio of 2.2 to 1 to the applicable effluent limitations on BODS.
- 81 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Daily 30 Day Daily 30 Day
PART 419 - PETROLEUM REFINING (Continued) FINAL REGULATIONS. PUBLISHED 5/9/74. EFFECTIVE 5/12/74
Subpart E - Integrated Subcateqory (Continued)
(b) The limits set forth in (a) of this section are to be multiplied by the following factors to calculate the maximum for any one day and the
maximum average of daily values for thirty consecutive days. (Applies to BPT, BAT and New Sources)
(1) Size factor
1,000 barrels of feedstock per stream clay Size factor
70 to 144.9 0.69
145 to 219.9 0.89
220 or greater 1.02
(2) Process factor
Process configuration Process factor
6.0 or less to 7.49 0.78
7.5 to 8.99 1.00
9.0 to 10.5 or greater 1.30
(c) The provisions of Subpart A (c) (1) and (2) apply to discharges of process waste water pollutants attributable to storm water runoff and ballast
water by a point source subject to the provisions of this subpart.
(d) The quantity and quality of pollutants or pollutant properties controlled by this paragraph, attributable to once-through cooling water, are
excluded from the discharge allowed by (b) of this section. Once-through cooling water may be discharged with a total organic concentration
not to exceed 5 mg/1.
- 82 -
-------
*BPT
BAT
New Sources
Parameter
30 Day Daily 30 Day Daily 30 Day_
FINAL REGULATIONS, PUBLISHED 6/28/74, EFFECTIVE 6/28/74 (AH references to ib/iooo ib are to 1000 ib of product)
Part 420 - IRON AND STEEL MANUFACTURING
Subpart A - By-Producj^Coke Subcategory
(a) Subject to the provisions of (b) and (c) of this section, the effluent quality required is as set forth below:
Ammonia
Cyanide
Cyanide A
Oil & Grease
Phenol
TSS
Sulfide
pH
.2736 lb/1000 Ib
.0657 lb/1000 Ib
.0327 lb/1000 Ib
.0045 lb/1000 Ib
.1095 lb/1000 Ib
.0912 lb/1000 Ib
.0219 lb/1000 Ib
.0109 lb/1000 Ib
.0015 lb/1000 Ib
.0365 lb/1000 Ib
6.0 - 9.0
(b) For coke plants utilizing desulfurization
units, the limitations specified may be
exceeded up to 15 percent by those
facilities equipped with gas desulfuriza-
tion units to the extent that such
measured discharge is necessary by reason
of the increased effluent volume gener-
ated by these facilities.
(c) For coke plants utilizing the indirect
ammonia recovery process, the limitations
specified in (a) of this section may be
exceeded up to 30 percent by those
facilities recovering ammonia by this
technique, to the extent that such
measured discharge is necessary by
reason of the increased effluent volume
generated by this process.
.0126 lb/1000 Ib
.0003 lb/1000 Ib
.0126 lb/1000 Ib
.0006 lb/1000 Ib
.0312 lb/1000 Ib
.0003 lb/1000 Ib
6.0 - 9.0
.0042 lb/1000 Ib
.0001 lb/1000 Ib
.0042 lb/1000 Ib
.0002 lb/1000 Ib
.0104 lb/1000 Ib
.0001 lb/1000 Ib
(b) For coke plants utilizing desulfurization
units, the limitations specified may be
exceeded up to 25 percent by those
facilities equipped with gas desulfuriza-
tion units to the extent that such
measured discharge is necessary by reason
of the increased effluent volume gener-
ated by these facilities.
(c) For coke plants utilizing the indirect
ammonia recovery process, the limitations
specified in (a) of this section may be
exceeded up to 70 percent by those
facilities recovering ammonia by this
technique, to the extent that such
measured discharge is necessary by
reason of the increased effluent volume
generated by this process.
.0126 lb/1000 Ib
.0042 lb/1000 Ib
.0003 lb/1000 Ib
.0126 lb/1000 Ib
.0006 lb/1000 Ib
.0312 lb/1000 Ib
.0003 lb/1000 Ib
6.0 -
.0001 lb/1000 Ib
.0042 lb/1000 Ib
.0002 lb/1000 Ib
.0104 lb/1000 Ib
.0001 lb/1000 Ib
9.0
(b) For coke plants utilizing desulfuriza-
tion units, the limitations specified
may be exceeded up to 25 percent by
those facilities equipped with gas
desulfurization units to the extent
that such measured discharge is
necessary by reason of the increased
effluent volume generated by these
facilities.
(c) For coke plants utilizing the indirect
ammonia recovery process, the limita-
tions specified in (a) of this section
may be exceeded up to 70 percent by
those facilities recovering ammonia by
this technique, to the extent that such
measured discharge is necessary by ,
reason of the increased effluent,volume
generated by this process.
- 83 -
-------
Parameter
Daih
*BPT
30 Dav
BAT
New Sources
Part 420 - IRON
Subpart B
Subpart C
Oil & Grease
Sulfide
Fluoride
TSS
PH
Subpart 0
TSS
Cyanide
Cyanide A
Phenol
Ammonia
Sulfide
Fluoride
pH
AND STEEL MANUFACTURING FINAL REGULATIONS,
- Beehive Coke Subcateqory
There shall be no discharge of process
waste water pollutants to navigable
waters.
- Sintering Subcategory
.0063 lb/1000 Ib .0021 lb/1000 Ib
.0312 lb/1000 Ib .0104 lb/1000 Ib
6.0 - 9.0
- Blast Furnace (Iron) Subcateqory
.0780 lb/1000 Ib .0260 lb/1000 Ib
.0234 lb/1000 Ib .0078 lb/1000 Ib
.0063 lb/1000 Ib .0021 lb/1000 Ib
.1953 lb/1000 Ib .0651 lb/1000 Ib
6.0 - 9.0
PUBLISHED 6/28/74, EFFECTIVE
6/28/74
There shall be no discharge of process
waste water pollutants to navigable
waters.
.0063 lb/1000 Ib
.00018 lb/1000 Ib
.0126 lb/1000 Ib
.0156 lb/1000 Ib
6.0 - 9.0
.0390 lb/1000 Ib
.0004 lb/1000 Ib
.0008 lb/1000 Ib
.0156 lb/1000 Ib
.0005 lb/1000 Ib
.0312 lb/1000 Ib
6.0 - 9.0
0021 lb/1000 Ib
00006 lb/1000 Ib
0042 lb/1000 Ib
0052 lb/1000 Ib
0130 lb/1000 Ib
00013 lb/1000 Ib
00026 lb/1000 Ib
0052 lb/1000 Ib
00016 lb/1000 Ib
0104 lb/1000 Ib
30 Dav
There shall be no discharge of process
waste water pollutants to navigable
waters.
.0063 lb/1000 Ib
.00018 lb/1000 Ib
.0126 lb/1000 Ib
.0156 lb/1000 Ib
.0021 lb/1000 Ib
.00006 lb/1000 Ib
.0042 lb/1000 Ib
.0052 lb/1000 Ib
6.0 - 9.0
.0390 lb/1000 Ib
.0004 lb/1000 Ib
.0008 lb/1000 Ib
.0156 lb/1000 Ib
.0005 lb/1000 Ib
.0312 lb/1000 Ib
.0130 lb/1000 Ib
.00013 lb/1000 Ib
.00026 lb/1000 Ib
.0052 lb/1000 Ib
.00016 lb/1000 Ib
.0104 lb/1000 Ib
6.0 - 9.0
- 84 -
-------
*BPT
BAT
New Sources
Parameter
Part 420 - IRON
Subpart E
TSS
Cyanide
Cyanide A
Phenol
Ammonia
Sulfide
Manganese
PH
Subpart F
Daily 30 Day
AND STEEL MANUFACTURING (Continued) FINAL
- Blast Furnace (Ferroman^anesel
.3129 lb/1000 16
.4689 lb/1000 Ib
.0624 lb/1000 Ib
1.5636 lb/1000 Ib
6.0
- Basic Oxygen Furnace
.1043
.1563
.0208
.5212
- 9.0
(Semi -wet
Subeategory_
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
Air Pollution
There shall be no discharge of process
waste water pollutants to navigable
waters.
Subpart G
TSS
Fluoride
PH
- Basic Oxyqen Furnace
.0312 lb/1000 Ib
6.0 -
(Wet Air
.0104
9.0
Daily
REGULATIONS, PUBLISHED 6/28/74
.0780
.0008
.0016
.0312
.0009
.0156
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
6.0 - 9.0
30 Day
, EFFECTIVE 6/28/74
0260 lb/1000 Ib
00026 lb/1000 Ib
00052 lb/1000 Ib
0104 lb/1000 Ib
0003 lb/1000 Ib
0052 lb/1000 Ib
Dally
.0780 lb/1000
.0008
.0016
.0312
.0009
.0156
lb/1000
lb/1000
lb/1000
lb/1000
lb/1000
Ib
Ib
Ib
Ib
Ib
Ib
6.0 - 9
.0260
.00026
.00052
.0104
.0003
.0052
.0
30 Day
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
lb/1000 Ib
Control Methods) Subcateqory
There shall be no discharge of process
waste water pollutants to navigable
waters.
Pollution Control Methods)
lb/1000 Ib
.0156
.0126
Subcategory
lb/1000 Ib
lb/1000 Ib
6.0 - 9.0
0052 lb/1000 Ib
0042 lb/1000 Ib
There
waste
waters
.0156
.0126
shall be no discharge of process
water pollutants to navigable
lb/1000
lb/1000
Ib
Ib
6.0 -
.0052
.0042
9.0
lb/1000 Ib
lb/1000 Ib
- 85 -
-------
*BPT
BAT
Parameter
Dailv
New Sources
30 Dav
Part 420 - IRON AND STEEL MANUFACTURING (Continued) FINAL REGULATIONS, PUBLISHED 6/28/74, EFFECTIVE 6/28/74
Subpart H -_
TSS
Fluoride
Nitrate
Zinc
pH
Subpart I -
Open Hearth Furnace, Subcategory
.0312 lb/1000 1b .0104 lb/1000 Ib .0156 1b/lOOO Ib
.0126 lb/1000 Ib
.0282 lb/1000 Ib
.0030 lb/1000 Ib
6.0 - 9.0 6.0 - 9
Electric Arc Furnace (Semi-wet Air Pollution Control Methods) Subcateqory
.0052 lb/1000 Ib
.0042 lb/1000 Ib
.0094 lb/1000 Ib
.0010 lb/1000 Ib
.0
There shall be no discharge of process There shall be no discharge of process
waste water pollutants to navigable waste water pollutants to navigable
waters. waters.
Subpart J -
TSS
Fluoride
Zinc
PH
Subpart K -
TSS
Zinc
Manganese
Lead
Electric Arc Furnace (Wet Air Pollution Control Methods) Subcateqory
.0312 lb/1000 Ib .0104 lb/1000 Ib .0156 lb/1000 Ib
.0126 lb/1000 Ib
.0030 lb/1000 Ib
6.0 - 9.0 6.0 - 9
Vacuum Degassing Subcategory
.0156 lb/1000 Ib .0052 lb/1000 Ib .0078 lb/1000 Ib
.0015 lb/1000 Ib
.0015 lb/1000 Ib
.00015 lb/1000 Ib
.0052 lb/1000 Ib
.0042 lb/1000 Ib
.0010 lb/1000 Ib
.0
.0026 lb/1000 Ib
.0005 lb/1000 Ib
.0005 lb/1000 Ib
.00005 lb/1000 Ib
.0156 lb/1000 Ib
.0126 lb/1000 Ib
.0030 lb/1000 Ib
6.
.0052 lb/1000 Ib
.0042 lb/1000 Ib
.0010 lb/1000 Ib
0 - 9.0
There shall be no discharge of process
waste water pollutants to navigable
waters.
.0156 lb/1000 Ib
.0126 lb/1000 Ib
.0030 lb/1000 Ib
6
.0078 lb/1000 Ib
.0015 lb/1000 Ib
.0015 lb/1000 Ib
.00015 lb/1000 Ib
.0052 lb/1000 Ib
.0042 lb/1000 Ib
.0010 lb/1000 Ib
.0 - 9.0
.0026 lb/1000 Ib
.0005 lb/1000 Ib
.0005 lb/1000 Ib
.00005 lb/1000 Ib
- 86 -
-------
*BPT BAT Newjources
Parameter DaTly 30 Da^ Daily 30 Day Daily 30 Day
Part 420 - IRON AND STEEL MANUFACTURING (Continued) FINAL REGULATIONS. PUBLISHED 6/28/74, EFFECTIVE 6/28/74
Subpart K - Vacuum Degassing Subcategory (Continued)
Nitrate .0141 lb/1000 Ib .0047 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
Subpart L - Continuous Casting Subcategory
TSS .0780 lb/1000 Ib .0260 lb/1000 Ib .0156 lb/1000 Ib .0052 lb/1000 Ib .0156 lb/1000 Ib .0052 lb/1000 Ib
Oil & Grease -0234 lb/1000 Ib .0078 lb/1000 Ib .0156 lb/1000 Ib .0052 lb/1000 Ib .0156 lb/1000 Ib .0052 lb/1000 Ib
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
- 87 -
-------
*BPT
Parameter
BAT
New Sources
PART 421 - NONFERROUS METALS FINAL REGULATIONS, PUBLISHED 4/8/74, EFFECTIVE 6/3/74
Subpart A - Bauxite Refining Subcategory
(a) Subject to the provisions of paragraph (b) of this section, there shall be no discharge of process waste water pollutants to navigable waters.
(b) During any calendar month there may be discharged from the overflow of a process waste water impoundment either a volume of process waste water
equal to the difference between the precipitation for that month that falls within the impoundment and the evaporation within the impoundment
for that month, or, if greater, a volume of process waste water equal to the difference between the mean precipitation for that month that falls
within the impoundment and the mean evaporation for that month as established by the National Climatic Center, National Oceanic and Atmospheric
Administration, for the area in which such impoundment is located (or as otherwise determined if no monthly data have been established by the
National Climatic Center).
Subpart B - Primary Aluminum Smelting Subcategory
Fluoride
TSS
2.0 lb/1000 Ib
of product
3.0 lb/1000 Ib
of product
1.0 lb/1000 Ib
of product
1.5 lb/1000 Ib
of product
pH 6.0 - 9,0
Subpart C - Secondary Aluminum Smelting Subcategory
(a) The following limitations establish
the quantity or quality of pollutants
or pollutant properties, which may
be discharged by a point source
subject to the provisions of this
subpart and which uses water for
metal cooling, after application
of the best practicable control
technology currently available:
There shall be no discharge of
process waste water pollutants to
navigable waters.
0.1 lb/1000 Ib
of product
.2 lb/1000 Ib
of product
0.05 lb/1000 Ib
of product
.1 lb/1000 Ib
of product
6.0 - 9.0
There shall be no discharge of process
waste water pollutants to navigable
waters.
0.05 lb/1000 Ib
of product
.1 lb/1000 Ib
of product
0.025 lb/1000 Ib
of product
.05 lb/1000 Ib
of product
6.0 - 9.0
(a) The following standards of perform-
ance establish the quantity or
quality of pollutants or pollutant
properties which may be discharged
by a new source subject to the
provisions of this subpart: There
shall be no discharge of process
waste water pollutants to navigable
waters.
(b) Application of the factors listed
in section 306(b) of the Act may
require variation from the standard
of performance set forth in this
section for any point source subject
-------
*BPT BAT
Parameter Average of daily values _foji_30_conseciitive Daily 30
days shall not exceed-
PART 421 - NONFERROUS METALS (Continued) FINAL REGULATIONS, PUBLISHED 4/8/74, EFFECTIVE 6/3/74
Subpart C - Secondary Aluminum Smelting Subcateqory (Continued)
(b) The following limitations establish
the quantity or quality of pollutants
or pollutant properties which may be
discharged by a point source subject
to the provisions of this subpart
and which uses aluminum fluoride in
its magnesium removal process
("demagging process"), after applica-
tion of the best practicable control
technology currently available:
There shall be no discharge of process
waste water pollutants to navigable
waters.
(c) The following limitations establish
the quantity or quality of pollutants
or pollutant properties, controlled
by this section, which may be dis-
charged by a point source subject to
the provisions of this subpart and
which uses chlorine in its magnesium
removal process, after application
of the best practicable control
technology currently available:
TSS 175 lbs/1000 Ib magnesium removed
New Sources
to such standard of performance
and which uses chlorine in the
magnesium removal process ("de-
magging" process). If variation
is determined to be necessary for
any such source, the discharge
of process waste water pollutants
shall be allowed from the magnesium
removal process only, and such
source shall be subject to effluent
limitations no less stringent than
those required by (c), BAT.
COD
6.5 lbs/1000 Ib magnesium removed
7.5 - 9.0
- 89 -
-------
*BPT
Parameter Average of daily values for 30 consecutive
days shall not exceed -
Daily
BAT
New Sources
30 Dav
Daih
30 Dav
PART 421 - NONFERROUS METALS (Continued) FINAL REGULATIONS, PUBLISHED 4/8/74, EFFECTIVE 6/3/74
Subpart C - Secondary Aluminum Smelting Subcategory (Continued)
(d) The following limitations establish
the quantity or quality of pollutants
or pollutant properties which may be
discharged by a point source subject
to the provisions of this subpart
and which processes residues by wet
methods, after application of the
best practical control technology
currently available.
TSS
Fluoride
Ammonia (as N)
Aluminum
Copper
COO
pH
1.5 lb/1000 Ib of product
.4 lb/1000 Ib of product
.01 lb/1000 Ib of product
1.0 lb/1000 Ib of product
.003 lb/1000 Ib of product
1.0 lb/1000 Ib of product
7.5 - 9.0
- 90 -
-------
*BPT BAT New Sources
Parameter Dally 30 Day Daily 30 Day Daily 30 Day
PART 422 - PHOSPHATE MANUFACTURING FINAL REGULATIONS, PUBLISHED 2/20/74, EFFECTIVE 4/22/74 (All references to lb/1000 lb are to 1000 Ib of product)
Subpart A - Phosphorus Production Subcategory
TSS 1.0 Ib/lOOQ lb 0.5 lb/1000 lb There shall be no discharge of process waste There shall be no discharge of process waste
water pollutants to navigable waters- water pollutants to navigable waters.
Total Phosphorus .30 lb/1000 lb .15 lb/1000 lb
Fluoride .10 lb/1000 lb .05 lb/1000 lb
Elemental Phosphorus No detectable quantity.
pH 6.0 - 9.0
Subpart B - Pjiospjigrus Consuming _Subcategory
The provisions of this subpart are applicable to discharges of pollutants resulting from the manufacture of phosphoric acid, phosphorus pentoxide,
phosphorus pentasulfide, phosphorus trichloride, and phosphorus oxychloride directly from elemental phosphorus. The production of phosphorus
trichloride and phosphorus oxychloride creates waste water pollutants not completely amenable to the procedures utilized for best practicable
control technology currently available. The standards set for phosphorus trichloride manufacture and phosphorus oxychloride manufacture, accordingly,
must differ from the rest of the subcategory at this level of treatment.
(a) There shall be no discharge of process waste There shall be no discharge to navigable There shall be no discharge of process
water pollutants to navigable waters from waters of process waste water pollutants waste water pollutants to navigable waters.
the manufacture of phosphoric acid, phosphorus to resulting from the manufacture of
pentoxide, or phosphorus pentasulfide. phosphoric acid, phosphorus pentoxide,
phosphorus pentasulfide, phosphorus
(b) Pollutants or pollutant properties which may trichloride or phosphorus oxychloride.
be discharged in process waste water from
phosphorus trichloride manufacturing on the
basis of production:
TSS 1.4 lb/1000 lb 0.7 lb/1000 lb
Total Phosphorusi.6 lb/1000 lb 0.8 lb/1000 lb
Arsenic .0001 lb/1000 lb .00005 lb/1000 lb
Elemental Phosphorus NO detectable quantity.
PH 6.0 - 9.0 - 91 -
-------
Parameter
Daily
*BPT
BAT
PART 422 - PHOSPHATE MANUFACTURING (Continued)
Subpart B - Phosphorus Consuming Subcategory (Continued)
(c) Pollutants or pollutant properties which may
be discharged in process waste water from
phosphorus oxychloride manufacturing on the
basis of production:
TSS
Total
Phosphorus
pH
TSS
Total
Phosphorus
pH
0.3 lb/1000 Ib
.34 lb/1000 Ib
0.15 lb/1000 Ib
.17 lb/1000 Ib
6.0 - 9.0
Subpart C - Phosphate Subcategory
(a) There shall be no discharge of process
waste water pollutants to navigable
waters from the manufacture of sodium
tripolyphosphate, or animal feed grade
calcium phosphate.
(b) The following limitations establish
the quantity or quality of pollutants
or pollutant properties, controlled
by this paragraph, which may be dis-
charged in process waste water from
human food grade calcium phosphate
manufacturing based on production:
0.12 lb/1000 Ib
.06 lb/1000 Ib
0.06 lb/1000 Ib
.03 lb/1000 Ib
6.0 - 9.0
New Sources
There shall be no discharge of process
waste water pollutants resulting from the
manufacture of sodium tripolyphosphate,
animal feed grade calcium phosphate, or
human food grade calcium phosphate
There shall be no discharge of process
waste water pollutants to navigable
waters.
- 92 -
-------
Parameter
BPT
BAT
New Sources
PART 423 - STEAM ELECTRIC POWER GENERATING EQUIPMENT - PROPOSED REGULATIONS (FINAL REGULATIONS NOT PROMULGATED AT TIME OF SUMMARY PUBLICATION DATE)
(a)(1) There shall be no discharge of heat from a
large base-load unit for which construction is
completed on or after July 1, 1977, except that
heat may be discharged in blowdown from
recirculating cooling water systems provided
that the temperature at which the blowdown is
discharged does not exceed at any time the
lowest temperature of the recirculating
cooling water prior to the addition of
make-up water.
(2) The limitation in paragraph (a)(l) of this
section shall not apply where the owner or
operator of a unit otherwise subject to it
can demonstrate:
(i) That sufficient land for mechanical draft
evaporative cooling towers is not available
on the premises or or, adjoining property
under the ownership or control of the owner
or operator, as of the date on which these
regulations were proposed, with some amount
of land use reassignment and no other
available alternative evaporative cooling
system is practicable, or
(ii) That total dissolved solids concentra-
tions in available intake cooling water
exceed 30,000 mg/1, and land not owned or
controlled by the owner or operator is located
within 150 m (500 ft) downwind (prevailing)
of all practicable locations for mechanical
draft cooling towers and no other alterna-
tive evaporative cooling system is
practicable.
(a)(l) There shall be no discharge of heat, except
that heat may be discharged in blowdown from the
recirculating condenser cooling water system
provided that the temperature at which the blow-
down is discharged does not exceed at any time
the lowest temperature of the recirculating
cooling water prior to the addition of make-up
water.
(2) The limitation set forth in subparagraph
(a)(l) shall be achieved as follows:
(i) No later than July 1, 1978, by baseload units
presently in operation or on which construction
is completed prior to July 1, 1977, with a
nameplate generating capacity of 500 megawatts
or greater.
(ii) No later than July 1, 1979, by base-load
units presently in operation or on which
construction is completed prior to July 1, 1977,
with a nameplate generating capacity of less
than 500 megawatts, but greater than 299
megawatts.
(iii) No later than July 1, 1980, by all other
large base-load units.
(iv) No later than July 1, 1983, by all other
units, including cyclic units, peaking units
and small base-load units.
(3) The limitation set forth in subparagraph
(a)(l) shall not apply to units as to which
the owner or operator can demonstrate that
(1) sufficient land for mechanical draft
(a) There shall be no discharge of heat by any
new sources, except that heat may be dis-
charged in blowdown from recirculating
cooling water systems provided that the
temperature at which the blowdown is dis-
charged does not exceed at any time the
lowest temperature of the recirculating
cooling water prior to the addition of
make-up water.
(b) The effluent limitations in BAT (b)
through (n) shall apply to discharges of
pollutants other than heat, except as pro-
vided in the following:
(c) There shall be no discharge of:
(1) corrosion inhibitors in blowdown from
recirculating cooling water systems;
(2) total residual chlorine, or other
chemical additives used for biological
control in main condenser tubes from
nonrecirculating cooling water systems;
(3) pollutants from systems providing
sluicing of bottom ash from the combustion
of oil or fly ash from the combustion of
any fuel; or
(4) pollutants from nonrecirculating ash
sluicing systems.
(d) Where waste waters from one source
with effluent limitations for a particular
pollutant are combined with other waste
- 93 -
-------
BPT
Parameter
BAT
New Sources
PART 423 - STEAM ELECTRIC POWER GENERATING EQUIPMENT (Continued)
(3) The limitations in paragraph (a)(l) shall not
apply to discharges from nonrecirculating house
service water systems in nuclear-fueled generating
units, and to waste water discharges from low-
volume waste sources or intermediate volume
waste sources other than blowdown from
recirculating cooling water systems.
(b) There shall be no discharge of pollutants
from clarification water treatment and
softening water treatment.
(c) Concentrations of free available chlorine
in waste water discharged from nonrecirculating and
recirculating cooling water systems shall not
exceed average concentrations of 0.2 mg/1 and
maximum concentrations of 0.5 mg/1 at the outlet
corresponding to an individual unit during a
maximum of one 2-hour period a day. No dis-
charge of total residual chlorine is otherwise
allowed. No discharge of total residual chlorine
is allowed from one unit while another unit
at the same plant is being chlorinated. When
it can be demonstrated by the owner or operator
that higher levels of free available chlorine
or more lengthy total periods of application
are required to maintain a reasonable level of
condenser tube cleanliness for nonrecircu-
lating cooling water systems, discharges of
amounts of free available chlorine in excess
of the above limitations which are necessary
to maintain such level of condenser tube
cleanliness may be permitted.
(d) There shall be no discharge of
polychlorinated biphenyl transformer fluid.
evaporative cooling towers is not available
on the premises, with a reasonably significant
amount of land use reassignment or on adjoining
properties, whether or not owned or controlled
by the owner or operator, and (2) none of the
available alternative evaporative cooling
systems is practicable.
(4) The limitations set forth in subparagraph
(a)(l) shall not apply to discharges from
nonrecirculating house service water systems
in nuclear-fueled units.
(b) The effluent limitations set forth in
BAT (c), (f)(2), (g), (h), (i), (k)(2),
and (k)(3) shall apply to discharges of
pollutants from recirculating and non-
recirculating cooling water, and sanitary
wastes, except that no discharge is allowed
of total residual chlorine from recirculating
cooling water systems shall that total
chromium, total phosphorus (as P), and total
zinc in waste water from recirculating
cooling water systems shall not exceed daily
average amounts, mg, of 0.2 mg/1 total
chromium x FLOW, total phosphorus (as P) of
5 mg/1 x FLOW and 1 mg/1 of total zinc x FLOW.
(c)(l) There shall be no discharge of waste
water from run-off waste sources, taken
collectively as if from one source, unless
the first 15 minutes of rainfall run-off are
segregated from the remainder during any
rainfall event.
waters (such as the combination of waste
water from low-volume waste sources with
nonrecirculating cooling water), the
effluent limitation, mg (or mg/1) for the
particular pollutant, excluding pH, for
the combined stream shall be the sum of the
effluent limitations (for concentration
limits apply appropriate dilution factors)
for each of the streams which contribute
to the combined stream except that the actual
amount, mg (or mg/1), of the pollutant in
a contributing stream will be used in place
of the effluent limitation for those con-
tributing streams where the actual amount,
mg (or mg/1), of the pollutant is less
than the effluent limitation, mg (or mg/1),
for the contributing stream.
- 94 -
-------
BPT
BAT
Parameter
New Sources
PART 423 - STEAM ELECTRIC POWER GENERATING EQUIPMENT (Continued)
(e) Total iron and total copper in waste water
from low-volume waste sources shall not exceed
daily average amounts, mg, of 1 mg/1 total
copper x FLOW and 1 mg/1 total iron x FLOW.
(f)(l) Total suspended solids in waste water
from low-volume waste sources shall not exceed
daily average amounts, mg. of 15 mg/1 x FLOW
or a maximum amount, mg, for any one day of
100 mg/1 x FLOW.
(2) Total suspended solids in waste water
from recirculating cooling water systems
shall not exceed daily average amounts, mg,
of 15 mg/1 x FLOW or a maximum amount, mg, for
any one day of 100 mg/1 x FLOW.
(3) Total suspended solids in waste water
from nonrecirculating ash sluicing systems
and from nonrecirculating wet-scrubber air
pollution control systems shall not exceed
daily average amounts, mg, of 15 mg/1 x
FLOW or a maximum amount, mg, for any one
day of 100 mg/1 x FLOW, except that amounts,
mg, in excess of the above limitations are
allowed only to the extent that the amount,
mg, of total suspended solids in waste water
from nonrecirculating ash sluicing systems
and from nonrecirculating wet-scrubber air
pollution control systems does not exceed
the amount, mg, of total suspended solids
brought into the plant, over the same time
span, for use in conjunction with the
nonrecirculating ash sluicing system or
the nonrecH-culating wet-scrubber air pol-
lution control system, respectively.
(2) Total suspended solids and oil and grease in
waste waters from the first 15 minutes of rainfall
run-off from any rainfall event, taken collectively
as if from one source, shall not exceed average
concentrations .of 15 mg/1 and 10 mg/1, respectively,
and maximum concentrations of 100 mg/1 and 20 mg/1,
respectively.
(3) Total suspended solids and oil and grease in
waste waters from all but the first 15 munutes of
rainfall run-off from any rainfall event, taken
collectively as if from one source, shall not
exceed average concentrations of 15 mg/1 and 10
mg/1, respectively, and maximum concentrations of
100 mg/1 and 20 fng/1, respectively.
(d) There shall be no discharge of pollutants
other than those controlled by paragraphs (a),
(b), and (c) of this section.
(e) There is no effluent limitation on waste
waters from the radiological waste system
presented in this regulation.
(f) Where waste waters from one source, with
effluent limitations for a particular pollutant,
are combined with other waste waters (such as
the combination of waste water from low-
volume waste sources with nonrecirculating
cooling water), the effluent limitation, mg
(or mg/1), for the particular pollutant,
excluding pH, for the combined stream shall be
the sum of the effluent limitations (for concen-
tration limits apply appropriate dilution factors)
for each of the streams which contribute to the
combined stream except that the actual amount,
mg (or mg/1), of the pollutant in a contributing
- 95 -
-------
BPT
Parameter
PART 423 - STEAM ELECTRIC POWER GENERATING EQUIPMENT (Continued)
(4) Total suspended solids in waste water run-
off from rainfall run-off sources, taken
collectively as if from one source, including
coal pile drainage, yard and roof drainage,
and run-off from construction activities shall
not exceed average concentrations of 15 mg/1
during the time span of each run-off event or
a maximum concentration of 100 mg/1 at any
time.
(g) The pH value of all streams discharged,
with the exception of nonrecirculating cooling
water, shall be in the range of 6.0 - 9.0 at
all times.
(h) Waste waters discharged from the sanitary
system shall meet applicable standards for
publicly-owned treatment works specified
in 40 CFR Part 133,
(i) No debris from the intake means shall be
discharged.
(j) There is no effluent limitation on waste
waters from the radiological waste system
presented in this regulation.
(k)(l) Oil and grease in waste water from
low-volume waste sources shall not exceed
daily average amounts, mg, of 10 mg/1 x FLOW,
or a maximum concentration of 20 mg/1 at any
time.
(2) Oil and grease in waste water from recirculating
cooling water systems shall not exceed daily
average amounts, mg, of 10 mg/1 x FLOW.
BAT
stream will be used in place of the effluent
limitation for those contributing streams
where the actual amount, mg (or mg/1), of the
pollutant is less than the effluent limitation,
mg (or mg/1), for the contributing stream.
New Sources
- 96 -
-------
Parameter
BPT
BAT
New Sources
PART 423 - STEAM ELECTRIC POWER GENERATING EQUIPMENT (Continue^)
(3) Oil and grease in waste water from rainfall run-off
sources, taken collectively as if from one source,
shall not exceed daily average concentrations of 10
mg/1 during the time span of each run-off event or a
maximum concentration of 20 mg/1 at any time,
(4) Oil and grease in waste waters from nonrecirculating
ash sluicing systems and from nonrecirculating wet-
scrubber air pollution control system shall not exceed
daily average amounts, mg, of 10 mg/1 x FLOW.
(1) Where waste waters from one source with effluent
limitations for a particular pollutant are combined
with other waste waters (such as the combination of
waste water from low-volume sources with non-
recirculating cooling water), the effluent limitation,
mg (or mg/1), for the particular pollutant, excluding
pH, for the combined stream shall be the sum of the
effluent limitations (for concentration limits apply
appropriate dilution factors) for each of the streams
which contribute to the combined stream, except that
the actual amount, mg (or mg/1), of the pollutant
in a contributing stream will be used in place of
the effluent limitation for those contributing
streams where the actual amount, mg (or mg/1), of
the pollutant is less than the effluent limitation,
mg (or mg/1), for the contributing stream.
- 97 -
-------
*BPT
BAT
New Sources
Parameter
Daily
PART 424 - FERROALLOY MANUFACTURING
Subpart A -
TSS
Chromium total
Chromium VI
Manganese total
PH
Subpart B -
TSS
Chromium total
Chromium VI
Manganese total
Cyanide total
Phenols
PH
Open Electric Furnaces
0.703 Ib/Mwh
.014 Ib/Mwh
.0014 Ib/Mwh
.141 Ib/Mwh
6.0 - 9.
30 Day
Daily
30 Day
Daily
30 Day
FINAL REGULATIONS, PUBLISHED 2/22/74, EFFECTIVE 4/23/74
with Wet Air Pollution
0.352 Ib/Mwh
.007 Ib/Mwh
.0007 Ib/Mwh
,070 Ib/Mwh
0
Covered Electric Furnaces and Other Smelting
0.922 Ib/Mwh
.018 Ib/Mwh
.0018 Ib/Mwh
.184 Ib/Mwh
.009 Ib/Mwh
.013 Ib/Mwh
6.0 - 9.
0.461 Ib/Mwh
.009 Ib/Mwh
.0009 Ib/Mwh
.092 Ib/Mwh
.005 Ib/Mwh
.009 Ib/Mwh
0
Control Devices Subcateqory
0.052 Ib/Mwh
.0017 Ib/Mwh
.0002 Ib/Mwh
.017 Ib/Mwh
Operations with Wet
0.071 Ib/Mwh
.002 Ib/Mwh
.0002 Ib/Mwh
.023 Ib/Mwh
.001 Ib/Mwh
.0009 Ib/Mwh
0.026 Ib/Mwh
.0009 Ib/Mwh
.0001 Ib/Mwh
.0086 Ib/Mwh
6.0 - 9.0
Air Pollution Control Devices
0.035 Ib/Mwh
.0012 Ib/Mwh
.0001 Ib/Mwh
.012 Ib/Mwh
.0006 Ib/Mwh
.0005 Ib/Mwh
6.0 - 9.0
0.052 Ib/Mwh
.0017 Ib/Mwh
.0002 Ib/Mwh
.017 Ib/Mwh
Subcategory
0.071 Ib/Mwh
.002 Ib/Mwh
.0002 Ib/Mwh
.023 Ib/Mwh
.001 Ib/Mwh
.0009 Ib/Mwh
0.026 Ib/Mwh
.0009 Ib/Mwh
.0001 Ib/Mwh
.0086 Ib/Mwh
6.0 - 9.0
0.035 Ib/Mwh
.0012 Ib/Mwh
.0001 Ib/Mwh
.012 Ib/Mwh
.0006 Ib/Mwh
.0005 Ib/Mwh
6.0 - 9.0
Provided, however, that for nonelectric furnace smelting processes, the units of the effluent limitations set forth in this section shall be read as
"Ib/ton of products," rather than "Ib/Mwh," and the limitations (except for pH) shall be three times those listed in the table in this section.
NOTE: "Mwh" shall mean megawatt hour(s) of electrical energy consumed in the smelting process (furnace power consumption).
- 98 -
-------
*BPI BAT New Sources
Parameter Dai|y 30 Day Daily 30 Day Daily 30 Day
PART 424 - FERROALLOY MANUFACTURING (Continued) FINAL REGULATIONS, PUBLISHED 2/22/74, EFFECTIVE 4/23/74
Subpart C - Slag Processing Subcategory
TSS 5.319 Ib/ton processed 2.659 Ib/ton processed 0.542 Ib/ton processed 0.271 Ib/ton processed 0.542 Ib/ton processed 0.271 Ib/ton
processed
Chromium total .106 Ib/ton processed .053 Ib/ton processed .011 Ib/ton processed ,0054 Ib/ton processed .011 Ib/ton processed .0054 Ib/ton
processed
Manganese total 1.064 Ib/ton processed .532 Ib/ton processed .108 Ib/ton processed .054 Ib/ton processed .108 Ib/ton processed .054 Ib/ton
processed
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
- 99 -
-------
Parameter
*BPT
BAT
Daili
PART 425 - LEATHER TANNING AND FINISHING
Subpart A -
BODS
TSS
Chrome
Oil & Grease
PH
Sulfide
TKN
Fecal Col i form
Hair Pulp Unhairing with
(a)
8.0 lb/1000 Ib of
raw material
10.0 lb/1000 Ib of
raw material
0.20 lb/1000 Ib of
raw material
1.50 lb/1000 Ib of
raw material
6.0 -
FINAL REGULATIONS, PUBLISHED 4/9/74, EFFECTIVE
Chrome Tanning and
4.0 lb/1000 Ib of
raw material
5.0 lb/1000 Ib of
raw material
0.10 lb/1000 Ib of
raw material
0.75 lb/1000 Ib of
raw material
9.0
Finishing Subcateqory
2.8 lb/1000 Ib of
raw material
3.0 lb/1000 Ib of
raw material
.1 lb/1000 Ib of
raw material
1.06 lb/1000 Ib of
raw material
6.0 - 9.
.01 lb/1000 Ib of
raw material
.54 lb/1000 Ib of
raw material
Maximum at any time: 400
6/4/74
1.40 lb/1000 Ib
raw material
1.50 lb/1000 Ib
raw material
.05 lb/1000 Ib
raw material
.53 lb/1000 Ib
raw material
0
of
of
of
of
.005 lb/1000 Ib o-
raw material
.27 lb/1000 Ib
raw material
counts per 1QO
of
ml
(b)
Additional allocations equal to one-
half the above effluent limitations for
BOD5 and TSS established in (a) of this
section are allowed any point source
subject to such effluent limitations
with a production less than 17,000 kg
hides per day.
Dail
New Sources
30 Dav
(a)
8.0 lb/1000 Ib of
raw material
10.0 lb/1000 Ib of
raw material
.20 lb/1000 Ib of
raw material
1.50 lb/1000 Ib of
raw material
4.0 lb/1000 Ib of
raw material
5.0 lb/1000 Ib of
raw material
.10 lb/1000 Ib of
raw material
.75 lb/1000 Ib of
raw material
6.0 - 9.0
(b)
Additional allocations equal to one-half
the above effluent limitations for B005
and TSS established in (a) of this sectio"
are allowed any point source subject to
such effluent limitations with a produc-
tion less than 17,000 kg hides per day.
- 100 -
-------
*BPT
Parameter
Dail\
BAT
30 Day Daily 30 Day
FINAL REGULATIONS, PUBLISHED 4/9/74. EFFECTIVE 6/4/74
New Sources
PART 425 - LEATHER TANNING AND FINISHING (Continued)
Subpart B - Hair Save Unhairinq with Chrome Tanning and Finishing Subcategory
(a)
BODS
TSS
Chrome
Oil & Grease
PH
9.2 lb/1000 Ib of
raw material
11.6 lb/1000 Ib of
raw material
.24 lb/1000 Ib of
raw material
1.80 lb/1000 Ib of
raw material
4.6 lb/1000 Ib of
raw material
5.8 lb/1000 Ib of
raw material
.12 lb/1000 Ib of
raw material
.90 lb/1000 Ib of
raw material
3.2 lb/1000 Ib of
raw material
3.6 lb/1000 Ib of
raw material
.12 lb/1000 Ib of
raw material
1.26 lb/1000 Ib of
raw material
1.60 lb/1000 Ib of
raw material
1.80 lb/1000 Ib of
raw material
.06 lb/1000 Ib of
raw material
.63 lb/1000 Ib of
raw material
Da i 1)
(a)
9,2 lb/1000 Ib of
raw material
11.6 lb/1000 Ib of
raw material
.24 lb/1000 Ib of
raw material
1.80 lb/1000 Ib of
raw material
30 Daj
4.6 Ib/TOOO Ib of
raw material
5.8 lb/1000 Ib of
raw material
.12 lb/1000 Ib of
raw material
.90 lb/1000 Ib of
raw material
6.0 - 9.0
6.0 - 9.0
6.0 - 9.0
Sulfide
TKN
Fecal Coliform
(b)
Additional allocations equal to one-half
the above effluent limitations for BODS
and TSS established in (a) of this section
are allowed any point source subject to
such effluent limitations with a production
less than 17,000 kg hides per day.
.012 lb/1000 Ib of
raw material
.64 lb/1000 Ib of
raw material
.006 lb/1000 Ib of
raw material
.32 lb/1000 Tb of
raw material
Maximum at any time: 400 counts per 100 ml.
(b)
Additional allocations equal to one-half
the above effluent limitations for BODS
and TSS established in (a) of this section
are allowed any point source subject to
such effluent limitations with a
production less than 17,000 kg hides per
day.
- 101 -
-------
Parameter
Dally
*BPT
BAT
New Sources
PART 425 - LEATHER TANNING AND FINISHING (Continued) FINAL REGULATIONS, PUBLISHED 4/9/74, EFFECTIVE 6/4/74
Subpart C -
BODS
TSS
Chrome
Oil & Grease
Sulfide
TKN
Fecal Col i form
PH
Unhairing with Vegetable or Alum Tanning and Finishing Subcateqory
(a)
7.6 lb/1000 Ib of
raw material
9.6 lb/1000 Ib of
raw material
.1 lb/1000 Ib of
raw material
1.50 lb/1000 Ib of
raw material
6.0 -
3.8 lb/1000 Ib of
raw material
4.8 lb/1000 Ib of
raw material
.05 lb/1000 Ib of
raw material
.75 lb/1000 Ib of
raw material
9.0
2.6 lb/1000 Ib of
raw material
2.8 lb/1000 Ib of
raw material
.1 lb/1000 Ib of
raw material
1.0 lb/1000 Ib of
raw material
.01 lb/1000 Ib of
raw material
.5 lb/1000 Ib of
raw material
Maximum at any time:
6.0
1.30 lb/1000 Ib of
raw material
1.40 lb/1000 Ib of
raw material
.05 lb/1000 Ib of
raw material
.50 lb/1000 Ib of
raw material
.005 lb/1000 Ib of
raw material
.25 lb/1000 Ib of
raw material
400 counts per 100 ml.
- 9.0
(b)
Additional allocations equal to one-half
the above effluent limitations for BOD5
and TSS established in (a) of this section
are allowed any point source subject to
such effluent limitations with a production
less than 17,000 kg hides per day.
Dail'
(a)
7.6 lb/1000 Ib of
raw material
9.6 lb/1000 Ib of
raw material
.1 lb/1000 Ib of
raw material
1.50 lb/1000 Ib of
raw material
3.8 lb/1000 Ib of
raw material
4.8 lb/1000 Ib of
raw material
.05 lb/1000 Ib of
raw material
.75 lb/1000 Ib of
raw material
6.0 - 9.0
(b)
Additional allocations equal to one-half
the above effluent limitations for BOD5
and TSS established in (a) of this section
are allowed any point source subject to
such effluent limitations with a
production less than 17,000 kg hides per
day.
- 102 -
-------
*BPT
BAT
PART 425 - LEATHER TANNING AND FINISHING (Continued) FINAL REGULATIONS, PUBLISHED 4/9/74, EFFECTIVE 6/4/74
Subpart D -
BOD5
TSS
Chrome
Oil & Grease
Sulfide
TKN
Fecal Col i form
PH
Finishing of Tanned Hides
(a)
3.2 lb/1000 Ib of
raw material
4.0 lb/1000 Ib of
raw material
.20 lb/1000 Ib of
raw material
.50 lb/1000 Ib of
raw material
6.0 - 9.
Subcateqory
1.6 lb/1000 Ib of
raw material
2.0 lb/1000 Ib of
raw material
.10 lb/1000 Ib of
raw material
.25 lb/1000 Ib of
raw material
0
1.0 lb/1000 Ib of
raw material
1.2 lb/1000 Ib of
raw material
.04 lb/1000 Ib of
raw material
.48 lb/1000 Ib of
raw material
.004 lb/1000 Ib of
raw material
.2 lb/1000 Ib of
raw material
Maximum at any time:
6.0
0.50 lb/1000 Ib
raw material
.60 lb/1000 Ib
raw material
.02 lb/1000 Ib
raw material
.24 lb/1000 Ib
raw material
of
of
of
of
.002 lb/1000 Ib o
raw material
.10 lb/1000 1b
raw material
400 counts per 100
- 9.0
of
ml
(b)
Additional allocations equal to one-half
the above effluent limitations for BOD5
and TSS established in (a) of this section
are allowed any point source subject to
such effluent limitations with a production
less than 17,000 kg hides per day.
Dail\
New Sources
(a)
3.2 lb/1000 Ib of
raw material
4.0 lb/1000 Ib of
raw material
.20 lb/1000 Ib of
raw material
.50 lb/1000 Ib of
raw material
30 Day
1.6 lb/1000 Ib of
raw material
2.0 lb/1000 Ib of
raw material
.10 lb/1000 Ib of
raw material
.25 lb/1000 Ib of
raw material
6.0 - 9.0
(b)
Additional allocations equal to one-half
the above effluent limitations for BOD5
and TSS established in (a) of this
section are allowed any point source
subject to such effluent limitations
with a production less than 17,000 kg
hides per day.
- 103 -
-------
*BPT
BAT
Parameter Daily 30 Day Daily 30 Day
PART 425 - LEATHER TANNING AND FINISHING (Continued) FINAL REGULATIONS. PUBLISHED 4/9/74. EFFECTIVE 6/4/74
Subpart E - Vegetable or Chrome Tanning of Unpaired Hides Subcategory
(a)
New Sources
BODS
TSS
Chrome
Oil & Grease
Sulfide
9.6 lb/1000 Ib
of raw material
12.0 lb/1000 Ib
of raw material
.12 lb/1000 Ib
of raw material
1.80 lb/1000 Ib
of raw material
4.8 lb/1000 Ib
of raw material
6.0 lb/1000 Ib
of raw material
.06 lb/1000 Ib
of raw material
.90 lb/1000 16
of raw material
3.2 lb/1000 Ib
of raw material
3.6 lb/1000 Ib
of raw material
.12 lb/1000 Ib
of raw material
1.26 lb/1000 Ib
of raw material
.012 lb/1000 Ib
1.60 lb/1000 Ib
of raw material
1.80 lb/1000 Ib
of raw material
.06 lb/1000 Ib
of raw material
.63 lb/1000 Ib
of raw material
.006 lb/1000 Ib
9.6 lb/1000 Ib
of raw material
12.0 lb/1000 Ib
of raw material
.12 lb/1000 Ib
of raw material
1.80 lb/1000 Ib
of raw material
4.8 lb/1000 Ib
of raw material
6.0 lb/1000 Ib
of raw material
.06 lb/1000 Ib
of raw material
.90 lb/1000 Ib
of raw material
TKN
Fecal Coliform
of raw material
.62 lb/1000 Ib
of raw material
of raw material
.31 lb/1000 Ib
of raw material
Maximum at any time: 400 counts per 100 ml.
PH
6.0 - 9.0
(b)
Additional allocations equal to one-half
the above effluent limitations for BOD5
and TSS established in (a) of this section
are allowed any point source subject to
such effluent limitations with a production
less than 17,000 kg hides per day.
6.0 - 9.0
6.0 - 9.0
(b)
Additional allocations equal to one-half
the above effluent limitations for BOOS
and TSS established in (a) of this
section are allowed any point source
subject to such effluent limitations
with a production less than 17,000 kg
hides per day.
- 104 -
-------
*BPT
BAT
New Sources
Parameter
Daily 30 Day
PART 425 - LEATHER TANNING AND FINISHING (Continued) FINAL
Subpart F -
BODS
TSS
Chrome
Oil & Grease
Sulfide
TKN
Fecal Coliform
PH
Unhairinq with Chrome
(a)
5.6 lb/1000 Ib
of raw material
6.8 lb/1000 Ib
of raw material
.20 lb/1000 Ib
of raw material
.70 lb/1000 Ib
of raw material
6.0 -
Tanning and No Finishing
2.8 lb/1000 Ib
of raw material
3.4 lb/1000 Ib
of raw material
.10 lb/1000 Ib
of raw material
.35 lb/1000 Ib
of raw material
9.0
Daily
REGULATIONS, PUBLISHED
Subcategory
1.4 lb/1000 Ib
of raw material
1.6 lb/1000 Ib
of raw material
.06 lb/1000 Ib
of raw material
.68 lb/1000 Ib
of raw material
.006 lb/1000 Ib
of raw material
.28 lb/1000 Ib
of raw material
Maximum at any time
6.0
30 Day
4/9/74, EFFECTIVE 6/4/74
0.70 lb/1000 Ib
of raw material
.80 lb/1000 Ib
of raw material
.03 lb/1000 Ib
of raw material
.34 lb/1000 Ib
of raw material
.003 lb/1000 Ib
of raw material
.14 lb/1000 Ib
of raw material
: 400 counts per 100 ml.
- 9.0
Daily
5.6 lb/1000 Ib
of raw material
6.8 lb/1000 Ib
of raw material
.20 lb/1000 Ib
of raw material
.70 lb/1000 Ib
of raw material
6.0 -
30_D_ay_
2.8 lb/1000 Ib
of raw material
3.4 lb/1000 Ib
of raw material
.10 lb/1000 Ib
of raw material
.35 lb/1000 Ib
of raw material
9.0
(b)
Additional allocations egual to one-half
the above effluent limitations for BODS
and TSS established in (a) of this section
are allowed any point source subject to
such effluent limitations with a production
less than 17,000 kg hides per day.
(b)
Additional allocations equal to one-half
the above effluent limitations for BOD5
and TSS established in (a) of this
section are allowed any point source
subject to such effluent limitations
with a production less than 17,000 kg
hides per day.
- 105 -
-------
Parameter Daily
PART 426 - GLASS MANUFACTURING
*BPT
BAT
New Sources
SUBPART A - INSULATION FIBERGLASS - FINAL REGULATIONS PUBLISHED 1/22/74, EFFECTIVE 3/25/74
SUBPARJS B - G - FINAL REGULATIONS PUBLISHED 2/14/74. EFFECTIVE 4/15/74 (All references to 1b/1000 Ib, Ib/ton,
lb/1000 sq ft, are to units of product)
Subpart A - Insulation Fiberglass Subcategory
Phenol
COD
BODS
TSS
(a) There shall be no discharge of process
waste water pollutants to navigable
waters, except as permitted in sub-
paragraph (b) below.
(b) The following limitations establish
the quantity or quality of pollutants
or pollutant properties, controlled
by this section, which may be dis-
charged in process waste water from
advanced air emission control devices,
When such water cannot be consumed in
the process.
0.0006 lb/1000 Ib
.33 lb/1000 Ib
.024 lb/1000 Ib
.03 lb/1000 Ib
0.0003 lb/1000 Ib
.165 lb/1000 Ib
.012 lb/1000 Ib
.015 lb/1000 Ib
pH 6.0 - 9.0
Subpart B - Sheet Glass Manufacturing Subcategory
There shall be no discharge of process
waste water pollutants to navigable
waters.
There shall be no discharge of process
waste water pollutants to navigable
waters.
There shall be no discharge of process
waste water pollutants to navigable
waters.
There shall be no discharge of process
waste water pollutants to navigable
waters.
There shall be no discharge of process
waste water pollutants to navigable
waters.
- 106 -
-------
*BPT
Parameter
Daih
BAT
30 Dav
New Sources
PART 426 - GLASS MANUFACTURING (Continued)
Subpart C - Rolled Glass Manufacturing Subcategory
There shall be no discharge of process
waste water pollutants to navigable
waters.
Subpart D - Plate Glass Manufacturing Subcategory
TSS 5.52 Ib/ton 2.76 Ib/ton
pH 6.0 - 9.0
Subpart E - Float Glass Manufacturing Subcategory
TSS 0.0040 Ib/ton 0.0040 Ib/ton
Oil .0028 Ib/ton .0028 Ib/ton
Phosphorus .0001 Ib/ton .0001 Ib/ton
pH 6.0 - 9.0
Subpart F - Automotive Glass Tempering Subcategory
TSS 0.40 lb/1000 sq ft 0.25 lb/1000 sq ft
Oil .13 lb/1000 sq ft .13 lb/1000 sq ft
pH 6.0 - 9.0
30 Dav
There shall be no discharge ofprocess
waste water pollutants to navigable
waters.
0.090 Ib/ton 0-090 Ib/ton
6.0 - 9.0
Dailj
30 Dav
There shall be no discharge of process
waste water pollutants to navigable
waters.
There shall be no discharge of process
waste water pollutants to navigable
waters.
0.0014 Ib/ton
.0028 Ib/ton
.0001 Ib/ton
0.0014 Ib/ton
.0028 Ib/ton
.0001 Ib/ton
0-0014 Ib/ton
.0028 Ib/ton
.0001 Ib/ton
0.0014 Ib/ton
.0028 Ib/ton
.0001 Ib/ton
6.0 - 9.0
0.05 lb/1000 sq ft 0.05 lb/1000 sq ft
.10 lb/1000 sq ft .10 lb/1000 sq ft
6.0 - 9.0
6.0 - 9.0
0.05 lb/1000 sq ft 0.05 lb/1000 sq ft
.10 lb/1000 sq ft .10 lb/1000 sq ft
6.0 - 9.0
- 107 -
-------
Parameter
Dailj
*BPT
30 Da\
PART 426 - GLASS MANUFACTURING (Continued)
Subpart G - Automotive Glass Laminating Subcategory
TSS 0.90 lb/1000 sq ft 0.90 lb/1000 sq ft
Oil .36 lb/1000 sq ft .36 lb/1000 sq ft
Phosphorus .22 lb/1000 sq ft .22 lb/1000 sq ft
pH 6.0-9.0
Daih
BAT
0.18 lb/1000 sq ft
.36 lb/1000 sq ft
.06 lb/1000 sq ft
30 Oav
0.18 lb/1000 sq ft
.36 lb/1000 sq ft
.06 lb/1000 sq ft
New Sources
Dailj
0.18 lb/1000 sq ft
.36 lb/1000 sq ft
.06 lb/1000 sq ft
30 Dav
0.18 lb/1000 sq ft
.36 lb/1000 sq ft
.06 lb/1000 sq ft
6.0 - 9.0
6.0 - 9.0
- 108 -
-------
Parameter
*BPT BAT
Daily 30 Day Daily
PART 427 - ASBESTOS MANUFACTURING
Subpart A - Asbestos-Cement Pipe Subcategory
30 Day Daily 30^ Daj
FINAL REGULATIONS. PUBLISHED 2/26/74. EFFECTIVE 4/29/74
TSS
PH
1.14 Ib/ton
of product
6.0 - 9.0
0.38 Ib/ton
of product
Subpart B - Asbestos-Cement Sheet Subcategory
Ib/ton 0.45 Ib/ton
of product of product
TSS 1,35 Ib/ton 0.45 Ib/ton
of product of
6.0 - 9.0
There shall be no discharge of process waste
water pollutants to navigable waters.
There shall be no discharge of process waste
water pollutants to navigable waters.
Subpart C - Asbestos Paper (Starch Binder) Subcategory
TSS
pH 6.0 - 9.0
Subpart D - Asbestos Paper (Elastomeric Binder) Subcategorv
1.10 Ib/ton
of product
0.70 Ib/ton
of product
There shall be no discharge of process
water pollutants to navigable waters.
TSS
PH
1.10 Ib/ton
3T 1
of product
6.0 - 9.0
0.70 Ib/ton
of product
There shall be no discharge of process waste
water pollutants to navigable waters.
Subpart E - Asbestos Millboard Subcategory
There shall be no discharge of process waste There shall be no discharge of process waste
water pollutants to navigable waters.
water pollutants to navigable waters.
Subpart F - Asbestos, Roof infl Subcategory
COD 0.029
TSS
pH
.020 Ib/ton
of product
6.0 - 9.0
0.016 Ib/ton
of product
.012 Ib/ton
of product
There shall be no discharge of process waste
water pollutants to navigable waters.
New Sources
Daily 30 Da.y
1.14 Ib/ton 0.38 Ib/ton
of product of product
6.0 - 9.0
There shall be no discharge of process waste
water pollutants to navigable waters.
There shall be no discharge of process waste
water pollutants to navigable waters.
1.10 Ib/ton 0.70 Ib/ton
of product of product
6.0 - 9.0
There shall be no discharge of process waste
water pollutants to navigable waters.
There shall be no discharge of process waste
water pollutants to navigable waters.
- 109 -
-------
*BPT
BAT
Parameter Daily 30 Day Daily 30 Day
PART 427 - ASBESTOS MANUFACTURING (Continued) FINAL REGULATIONS, PUBLISHED 2/26/74, EFFECTIVE 4/29/74
Subpart G -_Asbe_stos Floor Tile Subcateqory
COD
TSS
PH
0.30 Ib/mpc
of product
.13 Ib/mpc
of product
6.0 - 9.0
0.18 Ib/mpc
of product
.08 Ib/mpc
of product
There shall be no discharge of process waste
water pollutants to navigable waters.
New Sources
Daih
30 Day
There shall be no discharge of process waste
water pollutants to navigable waters.
NOTE: "mpc" shall mean 1000 pieces of floor tile. "Pieces" shall mean floor tile measured in the standard size of 12" x 12" x 3/32".
- 110 -
-------
*BPT
BAT
New Sources
Parameter Dally
PART 428 - RUBBER PROCESSING
30 Day Daily 30 Day Daily 30 Day
FINAL REGULATIONS, PUBLISHED 2/21/74, EFFECTIVE 4/22/74 (All references to lb/1000 Ib are to 1000 Ib of product)
Subpart A - Tire jmd Inner Tube Plants Subcategory
TSS 0.096 lb/1000 Ib 0.064 lb/1000 Ib
Oil&Grease .024 lb/1000 Ib .016 lb/1000 Ib
pH 6.0 - 9.0
Subpart B - Emulsion Crumb Rubber Subcategory
COD
BOD5
TSS
Oil&Grease
pH
12.00 lb/1000 Ib
.60 lb/1000 Ib
.98 lb/1000 Ib
.24 lb/1000 Ib
8.00 lb/1000 Ib
.40 lb/1000 Ib
.65 lb/1000 Ib
.16 lb/1000 Ib
6.0 - 9.0
Subpart C - Solution Crumb Rubber Subcategory
COD 5.91 lb/1000 Ib 3.94 lb/1000 Ib
BODS .60 lb/1000 Ib .40 lb/1000 Ib
TSS .98 lb/1000 Ib .65 lb/1000 Ib
Oil&Grease .24 lb/1000 Ib .16 lb/1000 Ib
pH 6.0 - 9.0
0.096 lb/1000 Ib 0.064 lb/1000 Ib
.024 lb/1000 Ib .016 lb/1000 Ib
6.0 - 9.0
3.12 lb/1000 Ib
.12 lb/1000 Ib
.24 lb/1000 Ib
.12 lb/1000 Ib
6.0 - 9.0
3.12 lb/1000 Ib
.12 lb/1000 Ib
.24 lb/1000 Ib
.12 lb/1000 Ib
6.0 - 9.0
2.08 lb/1000 Ib
.08 lb/1000 Ib
.16 lb/1000 Ib
.08 lb/1000 Ib
2.08 lb/1000 Ib
.08 lb/1000 Ib
.16 lb/1000 Ib
.08 lb/1000 Ib
0.096 lb/1000 Ib 0.064 lb/1000 Ib
.024 lb/1000 Ib .016 lb/1000 Ib
6.0 - 9.0
Limitations shall be as specified in BPT
Limitations shall be as specified in BPT
- Ill -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Daily 30 Day Dai]/ 30_Day_
Limitations shall be as specified in BPT
PART 428 - RUBBER PROCESSING (Continued) FINAL REGULATIONS, PUBLISHED 2/21/74, EFFECTIVE 4/22/74
Subpart
COD
BOD5
TSS
Oil&Grease
pH
D - Latex Rubber Subcategory
10.27 lb/1000 Ib
.51 lb/1000 Ib
.82 lb/1000 Ib
.21 lb/1000 Ib
6.0
6.85 lb/1000 Ib
.34 lb/1000 Ib
.55 lb/1000 Ib
.14 lb/1000 Ib
- 9.0
2.66 lb/1000 Ib 1
.11 lb/1000 Ib
.21 lb/1000 Ib
.11 lb/1000 Ib
6.0 - 9.0
.78 lb/1000 Ib
.07 lb/1000 Ib
.14 lb/1000 Ib
.07 lb/1000 Ib
- 112 -
-------
Parameter
*BPT
BAT
New Sources
PART 429 - TIMBER PRODUCTS FINAL REGULATIONS, PUBLISHED 4/18/74, EFFECTIVE 5/23/74
Subpart A - Barking Subcategory
(a) Subject to the provisions of paragraph
(b) of this section, there shall be
no discharge of process waste water
pollutants into navigable waters.
(b) The following limitations constitute
the maximum permissible discharge
for those barking processes which
utilize hydraulic barkers:
BOD5
TSS
PH
0.09 Ib/cu ft of
product
.431 Ib/cu ft of
product
6.0 - 9.0
Subpart B - Veneer Subcategory
0.03 Ib/cu ft of
product
0.144 Ib/cu ft of
product
(a) Subject to the provisions of paragraphs
(b), and (c) of this section, there
shall be no discharge of process
waste water pollutants into navigable
waters.
(b) The following limitations constitute
the maximum permissible discharge for
softwood veneer manufacturing
processes which use direct steaming
for the conditioning of logs:
There shall be no discharge of process
waste water pollutants into navigable
waters.
There shall be no discharge of process
waste water pollutants to navigable
waters.
(a) Subject to the provisions of para-
graph (b) of this section, there
shall be no discharge of process
waste water pollutants into navigable
waters.
(b) The following limitations establish
the quantity or quality of pollutants
or pollutant properties, controlled
by this paragraph, which may be
discharged by a new source which
utilizes a hydraulic barker(s) subject
to the provisions of this subpart.
0.09 Ib/cu ft of
product
0.431 Ib/cu ft of
product
0.03 Ib/cu ft of
product
0.144 Ib/cu ftof
product
6.0 - 9.0
There shall be no discharge of process
waste water pollutants to navigable
waters.
- 113 -
-------
Parameter
"BPT
30 Da\
BAT
PART 429 - TIMBER PRODUCTS (Continued)
Subpart B - Veneer Subcategory (Continued)
BODS
PH
0.045 Ib/cu ft of
product
0.015 Ib/cu ft of
product
6.0 - 9.0
(c) The following limitations constitute the
maximum permissible discharge for hardwood
veneer manufacturing processes which use
direct steaming for the conditioning of
logs:
0.034 Ib/cu ft of
product
BODS 0.10 Ib/cu ft of
product
pH 6.0 - 9.0
Subpart C - Plywood Subcategory
There shall be no discharge of process
waste water pollutants to navigable waters.
Subpart_D - Hardboard-Dry Process _Subcatej;ory
There shall be no discharge of process
waste water pollutants to navigable
waters.
Subpart E - Hardboard-Uet Process Subcategory
BODS 15.6 lb/2000 Ib of 5.2 lb/2000 Ib of
product product
TSS 33.0 lb/2000 Ib of 11.0 lb/2000 Ib of
product product
pH 6.0 - 9.0
Dail\
New Sources
30
There shall be no discharge of process
waste water pollutants to navigable waters.
There shall be no discharge of process
waste water pollutants to navigable
waters.
5.4 lb/2000 Ib of
product
6.6 lb/2000 Ib of
product
6.0
1.8 lb/2000 Ib of
product
2.2 lb/2000 Ib of
product
9.0
Da ill
30 Day
There shall be no discharge of process
waste water pollutants to navigable waters
There shall be no discharge of process
waste water pollutants to navigable
waters.
5.4 lb/2000 Ib of 1.8 lb/2000 Ib of
product product
6.6 lb/2000 Ib of 2.2 lb/2000 Ib of
product product
6.0 - 9.0
- 114 -
-------
*BPT
Parameter
Dailj
30 Da\
Dail\
BAT
30 Day
Dailj
Hew Sources
30 Dav
PART 429 - TIMBER PRODUCTS (Continued)
Subpart F - Wood Preserving Subcateqory
There shall be no discharge of process
waste water pollutants to navigable
waters.
Subpart G - Hood Preserving-Steam Subcategory
COD
Phenols
Oil & Grease
PH
68.5 lb/1000 ft3 of
product
.14 lb/1000 ft3 of
product
1.5 lb/1000 ft3 of
product
34.5 lb/1000 ft3 of
product
.04 lb/1000 ft3 of
product
.75 lb/1000 ft3 of
product
6.0 - 9,0
Subpart H - UoodJVeservinq-Boultom'zing Subcategory
There shall be no discharge of process
waste water pollutants to navigable
waters.
There shall be no discharge of process
waste water pollutants to navigable
waters.
13.7 lb/1000 ft3 of
product
.014 lb/1000 ft3 of
product
.42 lb/1000 ft3 of
product
6.9 lb/1000 ft3 of
product
.004 lb/1000 ft3 of
product
.21 lb/1000 ft3 of
product
6.0 - 9.0
There shall be no discharge of process
waste water pollutants to navigable
waters.
There shall be no discharge of process
waste water pollutants to navigable
waters.
13.7 lb/1000 ft3 of
product
.014 lb/1000 ft3 of
product
.42 lb/1000 ft3 of
product
6.9 lb/1000 ft3 of
product
.004 lb/1000 ft3 of
product
.21 lb/1000 ft3 of
product
6.0 - 9.0
There shall be no discharge of process
waste water pollutants to navigable
waters.
- 115 -
-------
Parameter
*BPT
BAT
Dail\
New Sources
30 Day Daily 30 Day Daily 30 Da.y
FINAL REGULATIONS, PUBLISHED 5/29/74, EFFECTIVE 5/29/74 (All references to Ib/ton are Ib/ton of product)
PART 430 - PULP, PAPER AND PAPERBOARD
Subpart A - Unbleached Kraft Subcategory
BODS 11.2 Ib/ton 5.6 Ib/ton 5.4 Ib/ton 2.7 Ib/ton
TSS 24.0 Ib/ton 12.0 Ib/ton 7.4 Ib/ton 3.7 Ib/ton
Color 30.0 Ib/ton 20.0 Ib/ton
pH 6.0 - 9.0 6.0 - 9.0
Subpart B - Sodium Based Neutral Sulfite Semi-Chemical Subcategory
BOD5 17.4 Ib/ton 8.7 Ib/ton 9.0 Ib/ton 4.5 Ib/ton
TSS 22.0 Ib/ton 11.0 Ib/ton 10.0 Ib/ton 5.0 Ib/ton
Color 75 percent removal.
pH 6.0 - 9.0 6.0 - 9.0
Subpart C - Ammonia Base Neutral Sulfite Semi-Chemical Subcategory
BOD5 16.0 Ib/ton 8.0 Ib/ton 12.8 Ib/ton 6.4 Ib/ton
TSS 20.0 Ib/ton 10.0 Ib/ton 10.4 Ib/ton 5.2 Ib/ton
Color 75 percent removal.
pH 6.0 - 9.0 6.0 - 9.0
6.2 Ib/ton
15.0 Ib/ton
30.0 Ib/ton
6.0 - 9.0
10.4 Ib/ton
15.4 Ib/ton
3.1 Ib/ton
7.5 Ib/ton
20.0 Ib/ton
5.2 Ib/ton
7.7 Ib/ton
6.0 - 9.0
15.0 Ib/ton
15.0 Ib/ton
7.5 Ib/ton
7.5 Ib/ton
6.0 - 9.0
- 116 -
-------
*BPT
Parameter
Daili
30 Day
Daily
BAT
30 Day
pH 6.0 - 9.0
Subpart E - Paperboard From Uaste Paper Subcategory
BOD5 6.0 Ib/ton 3.0 Ib/ton
TSS 10.0 Ib/ton 5.0 Ib/ton
pH 6.0 - 9.0
6.0 - 9.0
2.6 Ib/ton
3.2 Ib/ton
1.3 Ib/ton
1.6 Ib/ton
6.0 - 9.0
New Sources
Daih
30 Dav
PART 430 - PULP, PAPER AND PAPERBOARD (Continued)
Subpart D - Unbleached Kraft--Neutral Sulfite Semi-Chemical (Cross Recovery) Subcateqory
BOD5 16.0 Ib/ton 8.0 Ib/ton
TSS 25.0 Ib/ton 12.5 Ib/ton
Color
6.4 Ib/ton
8.4 Ib/ton
37.5 Ib/ton
3.2 Ib/ton
4.2 Ib/ton
25.0 Ib/ton
7.6 Ib/ton
16.0 Ib/ton
37.5 Ib/ton
3.8 Ib/ton
8.0 Ib/ton
25.0 Ib/ton
6.0 - 9.0
3.0 Ib/ton
8.0 Ib/ton
6.0 - 9.0
1.5 Ib/ton
4.0 Ib/ton
- 117 -
-------
*BPT BAT New Sources
Parameter Daily 30 Day Daily 30 Day Daily 30 Day
PART 431 - BUILDERS PAPER AND BOARD FINAL REGULATIONS. PUBLISHED 5/9/74. EFFECTIVE 5/9/74
Subpart A - Builders Paper and Roofing Felt Subcategory
8005 10.0 Ib/ton of product 6.0 Ib/ton of product 3.5 Ib/ton of product 2.0 Ib/ton of product 3.5 Ib/ton of product 2.0 Ib/ton of product
TSS 10.0 Ib/ton of product 6.0 Ib/ton of product 3.5 Ib/ton of product 2.0 Ib/ton of product 3.5 Ib/ton of product 2.0 Ib/ton of product
Settleable
Solids Not to exceed 0.2 ml/1 Not to exceed 0-2 ml/1 Not to exceed 0.2 ml/1
pH 6.0 - 9.0 6.0 - 9.0 6.0 - 9.0
- 118 -
-------
*BPT
BAT
New Sources
Parameter Daily 30 Day Daily
PART 432 - HEftT PRODUCTS FlNftL REGULATIONS. PUBLISHED 2/28/74, EFFECTIVE 4/29/74
30 Dav
Dailj
30 Day
Subpart A - Simple Slaughterhouse Subcategory
(a) On-site slaughter or subsequent meat, meat product or by-product processing of carcasses of animals slaughtered on-site:
BOD5
TSS
Oil&Grease
0.24 lb/1000 1b LWK
.40 lb/1000 Ib LWK
.12 1b/1000 Ib LWK
0.12 lb/1000 Ib LWK
.20 lb/1000 Ib LWK
.06 lb/1000 Ib LWK
0.03 lb/1000 Ib LWK
.05 lb/1000 Ib LWK
0.06 lb/1000 Ib LWK
.10 lb/1000 Ib LWK
10.0 mg/1 effluent
400 mpn/100 max. at any time
6.0 - 9.0
8.0 mg/1 effluent 4.0 mg/1 effluent
Fecal Coliform 400 mpn/100 ml max. at any time
pH 6.0 - 9.0
Ammonia
(b) If plants process hides from other plants in addition to its own, add to (a):
BOD5 0.04 lb/1000 Ib ELWK 0.02 lb/1000 Ib ELWK
TSS .08 lb/1000 Ib ELWK .04 lb/1000 Ib ELWK
Limitations shall be as in appropriate BPT
with exception that in addition to the
pollutants or pollutant properties con-
trolled by that subsection, discharges of
ammonia shall not exceed limitations set
forth below:
0.34 lb/1000 Ib LWK
0.17 lb/1000 Ib LWK
(c) If plants process blood from other plants in addition to its own, add to (a):
BODS 0.04 lb/1000 Ib ELWK 0.02 lb/1000 Ib ELWK 0.014 lb/1000 Ib ELWK 0.007 lb/1000 Ib
TSS .08 lb/1000 Ib ELWK .04 lb/1000 Ib ELWK .026 lb/1000 Ib ELWK .013 lb/1000 Ib
Ammonia 0.06 lb/1000 Ib ELWK 0.03 lb/1000 Ib ELWK
NOTE: "LWK" (live weight killed) shall mean the total weight of the total number of animals slaughtered during the time to which the effluent limitations
apply; i.e., during any one day or any period of thirty consecutive days.
"ELWK" (equivalent live weight killed) shall mean the total weight of the total number of animals slaughtered at locations other than the slaughter
house or packinghouse, which animals provide hides, blood, viscera or renderable materials for processing at that slaughterhouse, in addition to
those derived from animals slaughtered on site.
-119 -
-------
Parameter
*BPT BAT
Daily 30 Day Daily 30 Da>
FINAL REGULATIONS. PUBLISHED 2/28/74, EFFECTIVE 4/29/74
New Sources
Dail
0.10 lb/1000 lb ELWK
PART 432 - MEAT PRODUCTS (Continued)
Subpart A - Simple Slaughterhouse Subcategory
(d) If plants employ wet or low-temperature rendering of material from plants in addition to its own, add to (a):
BODS 0.06 lb/1000 Ib ELWK 0.03 lb/1000 lb ELWK 0.02 lb/1000 lb ELWK 0.01 lb/1000 lb ELWK
TSS .12 lb/1000 lb ELWK .06 lb/1000 Ib ELWK .04 lb/1000 Ib ELWK .02 lb/1000 lb ELWK
Ammon i a
(e) If plants employ dry rendering of material from other plants in addition to Its wn. add^ to (a):
BODS 0.02 lb/1000 Ib ELWK 0.01 lb/1000 lb ELWK 0.006 lb/1000 lb ELWK 0.003 lb/1000 lb ELWK
TSS .04 lb/1000 Ib ELWK .02 lb/1000 lb ELWK .014 lb/1000 lb ELWK .007 lb/1000 lb ELWK
pH 6.0 - 9.0
Ammonia
Subpart B - Complex Slaughterhouse Subcategory
(a) On-site slaughter or subsequent meat, meat product or by-product processing of carcasses of animals slaughtered on-site:
BODS 0.42 lb/1000 Ib LWK 0.21 lb/1000 lb LWK 0.08 lb/1000 lb LWK 0.04 lb/1000 lb LWK
TSS .50 lb/1000 lb LWK .25 lb/1000 lb LWK .14 lb/1000 lb LWK .07 lb/1000 lb LWK
Oil&Grease .16 lb/1000 Ib LWK .08 lb/1000 lb LWK 10.0 mg/1 effluent
Fecal Coliform Max. at any time 400 mpn/100 ml Max. at any time 400 mpn/100 ml
pH 6.0 - 9.0 6.0 - 9.0
Ammonia 8.0 mg/1 effluent 4.0 mg/1 effluent 0.48 lb/1000 lb LWK
0.04 lb/1000 lb ELWK
30 Day
0.05 lb/1000 lb ELWK
0.02 lb/1000 lb ELWK
The limitations shall be as in appropriate BPT
with the following addition:
0.24 lb/1000 lb LWK
- 120 -
-------
Parameter
*BPT BAT
Daily 30 Day Daily
3_0_p_ay Daily 30 Da>
FINAL REGULATIONS, PUBLISHED 2/28/74, EFFECTIVE 4/29/74
Dailj
New Sources
30 Day
PART 432 - MEAT PRODUCTS (Continued)
Subpart B - Complex Slaughterhouse Subcategory
(b) If plants process hides from other plants in addition to its own, add to (a):
BOD5 0.04 lb/1000 Ib ELWK 0.02 1b/1000 Ib ELWK
TSS .08 lb/1000 Ib ELWK .04 lb/1000 IbELWK
(c) If
BOD5
TSS
Ammonia
(d) If
BODS
TSS
Ammonia
(e) If
BOD5
TSS
Ammonia
plants process blood from other plants in addition to its own, add to (a):
**0.04 lb/1000 Ib ELWK 0.02 lb/1000 Ib ELWK 0.014 lb/1000 Ib ELWK 0.007 lb/1000 Ib ELWK
**0.08 lb/1000 Ib ELWK .04 lb/1000 Ib ELWK .026 lb/1000 Ib ELWK .013 lb/1000 Ib ELWK
0.06 lb/1000 Ib ELWK
plants employ wet or low-temperature rendering_of material from plants in addition to its own, add to (a):
0.06 lb/1000 Ib ELWK 0.03 lb/1000 Ib ELWK 0.02 lb/1000 Ib ELWK 0.01 lb/1000 Ib ELWK
.12 lb/1000 Ib ELWK .06 lb/1000 Ib ELWK .04 lb/1000 Ib ELWK .02 lb/1000 Ib ELWK
0.03 lb/1000 Ib ELWK
0.10 lb/1000 Ib ELWK
0.05 lb/1000 Ib ELWK
plants employ dry rendering of material from other pl_ants in addition to its own, add to (a_):
0.02 lb/1000 Ib ELWK 0.01 lb/1000 Ib ELWK 0.006 lb/1000 Ib ELWK 0.003 lb/1000 Ib ELWK
.04 lb/1000 Ib ELWK .02 lb/1000 Ib ELWK .014 lb/1000 Ib ELWK .007 lb/1000 Ib ELWK
0.04 lb/1000 Ib ELWK
0.02 lb/1000 Ib ELWK
**Corrected per 39 FR 26423, July 19, 1974.
- 121 -
-------
Parameter
Dail
BAT
30 Da;y Daily 3p_
FINAL REGULATIONS, PUBLISHED 2/28/74. EFFECTIVE 4/29/74
Mil
New Sources
30 Dav
PART 432 - MEAT PRODUCTS (Continued)
Subpart C - Low-Processing Packinghouse Subcategory
(a) On-site slaughter or subsequent meat, meat product or by-product processing of carcasses of animals slaughtered on-site:
BODS
TSS
Oil&Grease
0.34 lb/1000 Ib LWK
.48 lb/1000 Ib LWK
.16 lb/1000 Ib LWK
0.17 lb/1000 Ib LWK
.24 lb/1000 Ib LWK
0.08 lb/1000 Ib LWK
.12 lb/1000 Ib LWK
0.04 lb/1000 Ib LWK
.06 lb/1000 Ib LWK
The limitations shall be as in appropriate
BPT, with the following addition:
.08 lb/1000 Ib LWK 10.0 mg/1 effluent
Max. at any time 400 mpn/100 ml
6.0 - 9.0
8.0 mg/1 effluent 4.0 mg/1 effluent
0.48 lb/1000 Ib LWK
Fecal Coliform Max. at any time 400 mpn/100 ml
pH 6.0 - 9.0
Ammonia
(b) If plants process hides from other giants in addition to its own, add to (a):
BODS 0.04 lb/1000 Ib ELWK 0.02 lb/1000 Ib ELWK
TSS .08 lb/1000 Ib ELWK .04 lb/1000 Ib ELWK
(c) If plants process blood from other plants in addition to its own, add to (a):
BODS 0.04 lb/1000 Ib ELWK 0.02 lb/1000 Ib ELWK 0.014 lb/1000 Ib ELWK 0.007 lb/1000 Ib ELWK
TSS .08 lb/1000 Ib ELWK .04 lb/1000 Ib ELWK .026 lb/1000 Ib ELWK
Ammonia
(d) If plants employ wet or low-temperature gendering of material from plants in addition to its own, add to (a):
BODS 0.06 lb/1000 Ib ELWK 0.03 lb/1000 Ib ELWK 0.02 lb/1000 Ib ELWK. 0.01 lb/1000 Ib ELWK
TSS .12 lb/1000 Ib ELWK .06 lb/1000 Ib ELWK .04 lb/1000 Ib ELWK .02 lb/1000 Ib ELWK
Ammonia 0.10 lb/1000 Ib ELWK
0.24 lb/1000 Ib LWK
.013 lb/1000 Ib ELWK
0.06 lb/1000 Ib ELWK
0.03 lb/1000 Ib ELWK
0.05 lb/1000 Ib ELWK
- 122 -
-------
Parameter
*§PT BAT
Daily 30 Day Daily 30 Dai
FINAL REGULATIONS,_PUBLISHED 2/28/74. EFFECTIVE 4/29/74
Dailj
New Sources
30 Dai
PART 432 - MEAT PRODUCTS (Continued)
(e) If plants employ dry rendering of material from other plants in addition to its own, add to (a):
BOD5 0.02 1b/1000 Ib ELWK 0.01 lb/1000 Ib ELWK 0.006 lb/1000 Ib ELWK 0.003 lb/1000 Ib ELWK
TSS .04 1b/lOOO Ib ELWK .02 lb/1000 Ib ELWK .014 lb/1000 Ib ELWK .007 lb/1000 Ib ELWK
Ammonia
Subpart D - HigJT-Processing Packinghouse Subcateqory
(a) On-site slaughter or subsequent meat, meat product or by-product processing of carcasses of animals slaughtered on-site:
BOD5+ 0.48 lb/1000 Ib LWK 0.24 lb/1000 Ib LWK 0.16 lb/1000 Ib LWK 0.08 lb/1000 Ib LWK
0.04 lb/1000 Ib ELWK
0.02 lb/1000 Ib ELWK
TSS+ .62 lb/1000 Ib LWK .31 lb/1000 Ib LWK
Oil&Grease .26 lb/1000 Ib LWK .13 lb/1000 Ib LWK
Fecal Coliform Max. at any time 400 mpn/100 ml
pH 6.0 - 9.0
Ammonia
(b) If plants process hides from other plants in addition to its own, add to (a):
BODS 0.04 lb/1000 Ib ELWK 0.02 lb/1000 Ib ELWK
TSS .08 lb/1000 Ib ELWK .04 lb/1000 Ib ELWK
.20 lb/1000 Ib LWK .10 lb/1000 Ib LWK
10.0 mg/1 effluent
Max. at any time 400 mpn/100 ml
6.0 - 9.0
8.0 mg/1 effluent 4.0 mg/1 effluent
The limitations shall be as in appropriate
BPT, with the following addition:
0.80 lb/1000 Ib LWK
0.40 lb/1000 Ib LWK
+The values for BCD5 and suspended solids are for average plants, i.e., plants with a ratio of average weight of processed meat products to average
LWK of 0.55. Adjustments can be made for high-processing packinghouses at other ratios according to the following equations:
(BPT:) kg BOD5/1000 kg LWK = 0.21+0.23 (v-0.4) (BAT:) kg BOC5/1000 kg LWK = 0.07 + 0.08 (v-0 4)
kg SS/1000 kg LWK = 0.28+0.30 (v-0.4) kg SS/1000 kg LWK = 0.09 + 0.10 (v-0.4)
where v=kg processed meat products/kg LWK. where v=kg processed meat products/kg LWK.
- 123 -
-------
Parameter
*BPT BAT
30 Day Daily 30 Da>
FINAL REGULATIONS, PUBLISHED 2/28/74. EFFECTIVE 4/29/74
Dailj
New Sources
30 Dav
PART 432 - MEAT PRODUCTS (Continued)
(c) If plants process blood from other plants in addition to its own, add to (a):
BODS 0.04 lb/1000 Ib ELWK 0.02 lb/1000 Ib ELWK 0.014 lb/1000 Ib ELWK 0.007 lb/1000 Ib ELWK
TSS .08 lb/1000 Ib ELWK .04 lb/1000 Ib ELWK .026 lb/1000 Ib ELWK .013 lb/1000 Ib ELWK
Ammonia 0.06 lb/1000 Ib ELWK
(d) If plants employ wet or low-temperature rendering of material from plants in addition to its own, add to (aj:
BODS 0.06 lb/1000 Ib ELWK 0.03 lb/1000 Ib ELWK 0.02 lb/1000 IbELWK 0.01 lb/1000 Ib ELWK
TSS .12 lb/1000 Ib ELWK .06 lb/1000 Ib ELWK .04 lb/1000 IbELWK .02 lb/1000 Ib ELWK
Ammonia 0.10 lb/1000 IbELWK
(e) If plants employ dry rendering of material from other p1ant_s_in addition to its own, add to (a):
BODS 0.02 lb/1000 Ib ELWK 0.01 lb/1000 Ib ELWK 0.006 lb/1000 Ib ELWK 0.003 lb/1000 IbELWK
TSS ,04 lb/1000 Ib ELWK .02 lb/1000 Ib ELWK ,014 lb/1000 Tb ELWK .007 lb/1000 IbELWK
Ammonia 0.04 lb/1000 IbELWK
0.03 lb/1000 IbELWK
0.05 lb/1000 Ib ELWK
0.02 lb/1000 Ib £LWK
- 124 -
-------
------- |