Treatability Manual Volume 6 Bibliography

UNITED STATES ENVIRONMENTAL PROTECTION AGENCY
CINCINNATI, OHIO 45268
DATE: October 2, 1980
subject: "Treatability Manual" source documents
from: joAnn Johnson
Chief, Librar^ rvices
TO: Regional Librarians
You recently received a five volume set titled "Treat-
ability Manual" (EPA 600/8-80-042 a-e). When this manual
was first being developed the Cincinnati library agreed to
maintain a deposit collection of the source documents and
to establish a backup microfiche file.
After we had designed a rather unsophisticated system,
using a four digit accession number (preceded by 05BT) it
was decided that fiche copies of the source documents should
be distributed to the Regional Libraries"! You will be receiv-
ing the fiche within the next, week.	'	1	¦
Attached you will find a copy of the bibliography from
vol. 5 of the "Treatability Manual" annotated with the
accession numbers, which is how the fiche collection is arranged.
There are a few peculiarities you need to be aware of:
-	The "Treatability Manual" bibliography uses cover
titles, not title page titles, most of the time.
-	There will be missing numbers in the fiche collection
because they were assigned t(5~ix50'k"s—arrd-"journal
articles for the deposit collection, only.
-	There are documents in the fiche collection which
were not used in the manual in its present revision.
-	There are a few documents which were not available at the
time the fiche were reproduced. These will be sent to
you as a supplement.
If you have any problems using the collection, feel free
to call me at 513/684-7701.

-------
SECTION V.6
BIBLIOGRAPHY
A. REFERENCES USED IN VOLUMES I-IV
References Used in Volume I
The Chemical Rubber Company. Handbook of Chemistry and Physics
48th Edition. Cleveland, Ohio, 1967.
CRC Press, Inc. CRC Handbook of Chemistry and Physics, 58th
Edition. Cleveland, Ohio, 1977.
Dobbs, R.A., and J.M. Cohen. Carbon Adsorption Isotherms for
Toxic Organics. U.S. Environmental Protection Agency,
Cincinnati, Ohio, April 1980.
Carl
onmeetal
R. J. Lewis, Sr
and R. L
Fairchild, E. J
of Toxic Effects of Chemical Substances, Volume II. NIOSH-73-
104B, National Institute for Occupational Safety and Health,
Cincinnati, Ohio, 1977.
Ferguson, T.L., Bergman, F.S., Cooper, G.R., Li, R.T., and
F.I. Honea. Determination of Incinerator Operating Conditions
Necessary for Safe Disposal of Pesticides. Contract 68-03-0286
U.S. Environmental Protection Agency, Cincinnati, Ohio, July 19
Fochtman, E. G.f and W. Eisenberg. Treatability of Carcinogeni
and Other Hazardous Organic Compounds. Illinois Institute of
Technology Research Institute, Chicago, Illinois. 58 pp.
Initial Scientific and Minieconomic Review of Methyl Parathion,
Criteria and Evaluation Division, Office of Pesticide Programs,
U.S. Environmental Protection Agency, Washington, D.C., 1971.
Interscience Encyclopedia, Inc. Encyclopedia of Chemical
Technology, Volume 5, 3rd Edition. New York, New York, 1978.
Jordan, T. E. Vapor Pressure of Organic Compounds. Interscier
Publishers, Inc., New York, New York, 1954.
Date: 6/23/80
V. 6-1

-------
McGraw Hill, Inc. Lange's Handbook of Chemistry, 12th Edition.
New York, New York, 1979.
Manual of Treatment Techniques for Meeting the Interim Primary
Drinking Water Regulations. EPA-600/8-77-005, U.S. Environ-
mental Protection Agency, Cincinnati, Ohio, May 1977. 73 pp.
Meister Publishing Co. 1976 Farm Chemicals Handbook. Willoughby,
Ohio, 1976.
"Merck and Co., Inc. The Merck Index, Ninth Edition. Rahway,
New Jersey, 1976.
The National Research Council of the U.S.A. International
Critical Tables of Numerical Data, Physics, Chemistry, and
Technology, Volume III. McGraw-Hill, New York, New York, 1928.
Off-line Bibliographic Citation List Generated from the Toxicol-
ogy Data Bank by MEDLARS II, National Library of Medicine's
National Interactive Retrieval Service, Bethesda, Maryland,
11 June 1979.
Pitter, P. Determination of Biological Degradability of Organic
Substances. Water Research, 101976.
Quellette, R. P., and J. A. King. Chemical Week Pesticides
Register. McGraw-Hill Book Company, New York, New York, 1977.
Report on visit of D.. Stephan and W. Cawley, U.S. Environmental
Protection Agency, to Calgon Environmental Systems Division,
Calgon Corporation, Pittsburgh, Pennsylvania, 9 April 1979.
132 pp.
Tabak, H. H., and E. F. Barth. Biodegradability of Benzidine
in Aerobic Suspended Growth Reactors. Journal of the Water
Pollution Control Federation, March 1978. 7 pp.
Tucker, E. S., V. W. Saeger, and 0. Hicks. Activated Sludge
Primary Biodegradation of Polychlorinated Biphenyls. Monsanto
Company, St. Louis, Missouri, March 1975. 9 pp.
Versar, Inc. Water Related Environmental Fate of 129 Priority
Pollutants, Volume I. U.S. Environmental Protection Agency,
Waghington, D.C., 1979.
Versar, Inc. Water Related Environmental Fate of 129 Priority
Pollutants, Volume II. U.S. Environmental Protection Agency,
Washington, D.C., 1979.
Date: 6/23/80
V. 6-2

-------
Verschueren, K. Handbook of Environmental Data on Organic Chemi-
cals. Van Nostrand Reinhold Company, New York, New York, 1977.
Warner, H.P., Cohen, J.M., and J.C. Ireland. Determination of
Henry's Law Constants of Selected Priority Pollutants,
Cincinnati, Ohio, April 1980. 14pp.
References Used in Volume II
Auto and Other Laundries —
^QgQNKDC Consent Decree Industry Summary - Auto and Other Laundries.
OOll Status Report on the Treatment and Recycle of Wastewaters from
'• the Car Wash Industry (draft contractor's report). Contract
68-01-5667, U.S. Environmental Protection Agency, Washington, DC,
July 1979.
OOJ2L Technical Support Document for Auto and Other Laundries Industry
(draft contractor's report). Contract 68-03-2550, U.S. Environ-
mental Protection Agency, Washington, D.C., August 1979.
Coal Mining —
>3(, Development Document for Interim Final Effluent Limitations
Guidelines and New Source Performance Standards for the Coal
Mining Point Source Category. EPA 440/1-75/057 Group II, U.S.
Environmental Protection Agency, Washington, D.C., October 1975.
0630 NRDC Consent Decree Industry Summary - Coal Mining.
OOOL Technical Assistance in the Implementation of the BAT Review of
Coal Mining Industry Point Source Category (draft contractor's
report). Contracts 68-01-3273, 68-01-4762, and 68-02-2618, U.S.
Environmental Protection Agency, Washington, D.C., March 1979.
Electroplating —
Environmental Protection Agency Effluent Guidelines and Standards
for Electroplating. Environment Reporter, 135:0341-0351, as of
5 May 1980.
Final Development Document for Existing Source Pretreatment
Standards for the Electroplating Point Source Category.
EPA 440/1-79/003, U.S. Environmental Protection Agency,
Washington, D.C., August 1979. 526 pp.
0O3O NRDC Consent Decree Industry Summary - Electroplating.
Date: 6/23/80
V, 6-3

-------
Inorganic Chemicals Manufacturing —
Development Document for Effluent Limitations Guidelines and NSPS
@$£*1 f°r the Major Inorganic Products Point Source Category. EPA-440/
1-74-007-a, U.S. Environmental Protection Agency, Washington,
D.C., March 1974.
<9^0"7 Draft Development Document for Inorganic Chemicals Manufacturing
Point Source Category - BATEA, NSPS, and Pretreatment Standards
(draft contractor's report). Contract 68-01-4492, U.S. Environ-
mental Protection Agency, Effluent Guidelines Division, Washing-
ton, D.C., April 1979.
Environmental Protection Agency Effluent Guidelines and Standards
for Inorganic Chemicals (40CFR415; 39FR9612, March 12, 1974;
amended as shown in Code of Federal Regulations, Vol. 40, revised
as of July 1, 1976; 41FR51599 and 51601, November 23, 1976;
42FR17443, April 1, 1977, 42FR10681, February 23, 1977;
42FR37294, July 20, 1977).
0O3O NRDC Consent Decree Industry Summary - Inorganic Chemicals
Industry.
0020 Supplement for Pretreatment to the Development Document for the
Inorganic Chemicals Manufacturing Point Source Category. EPA-400/
1-77/087A, U.S. Environmental Protection Agency, Washington,
D.C., July 1977.
Iron and Steel Manufacturing —
0//O Draft Development Document for Proposed Effluent Limitations
Guidelines and Standards for the Iron and Steel Manufacturing
Point Source Category, Volume I - General. U.S. Environmental
Protection Agency, Washington, DC, October 1979.
©/»/ Draft Development Document for Proposed Effluent Limitations
Guidelines and Standards for the Iron and Steel Manufacturing
Point Source Category, Volume II - By-Product Cokemaking and
Beehive Cokemaking Subcategories. U.S. Environmental Protection
Agency, Washington, DC, October 1979.
Draft Development Document for Proposed Effluent Limitations
Guidelines and Standards for the Iron and Steel Manufacturing
Point Source Category, Volume III - Sintering and Blast Furnace
Subcategories. U.S. Environmental Protection Agency, Washington,
DC, October 1979.
oita Draft Development Document for Proposed Effluent Limitations
Guidelines and Standards for the Iron and Steel Manufacturing
Foint Source Category, Volume IV - Basic Oxygen Furnace and Open
Hearth Furnace Subcategories. U.S. Environmental Protection
Agency, Washington, DC, October 1979.
Date: 6/23/80
V. 6-4

-------
46
o|«f I
Draft Development Document for Proposed Effluent Limitations and
Standards for the Iron and Steel Manufacturing Point Source
Category, Volume V - Electric Arc Furnace, Vacuum Degassing, and
Continuous Casting Subcategories. U.S. Environmental Protection
Agency, Washington, DC, October 1979.
Draft Development Document for Proposed Effluent Limitations and
Standards for the Iron and Steel Manufacturing Point Source
Category Volume VI.- Hot Forming-Primary, Hot Forming Section,
Hot-Forming-Flat, and Hot Forming-Pipe and Tube Subcategories,
U.S. Environmental Protection Agencv, Washington, D.C., October
1979.
OilQ Draft Development Document for Proposed Effluent Limitations and
Standards for the Iron and Steel Manufacturing Point Source
Category-Volume VII - Pipe and Tube, and Cold Rolling Subcatego-
ries. U.S. Environmental Protection Agency, Washington, D.C.
October 1979.
Draft Development Document for Proposed Effluent Limitations and
' * Standards for the Iron and Steel Manufacturing Point Source
Category - Volume VIII - Sulfuric Acid Pickling, Hydrochloric
Acid Pickling, and Combination Acid Pickling Subcategories. U.S.
Environmental Protection Agency, Washington, D.C., October, 1979.
0
iiXyf Draft Development Document for Proposed Effluent Limitation and
Standards for the Iron and Steel Manufacturing Point Source
Category - Volume IX - Hot Coatings, Scale Removal, and Alkaline
Cleaning Subcategories. U.S. Environmental Protection Agency,
Washington, D.C., October, 1979.
0050 NRDC Consent Decree Industry Summary - Iron and Steel Industry.
Environmental Protection Agency, Effluent Guidelines and Stand-
ards for Iron and Steel Manufacturing (40CFR420; 39FR24114, June
28, 1974; Amended by 41 FR 13004, March 2.9, 1976; 41 FR 32218,
August 2, 1976 ) .
Leather Tanning and Finishing Industry —
Development Document for Proposed Effluent Limitations Guide-
* lines, New Source Performance Standards, and Pretreatment Stand-
ards for the Leather Tanning and Finishing Point Source Category.
U.S. Environmental Protection Agency, Effluent Guidelines Divi-
sion, Washington, D.C., July 1979.
Effluent Guidelines and Standards for Leather Tanning and Finish-
ing. U.S. Environmental Protection Agency, 40 CFR 425; 39 FR
12958, April 9, 1974.
*030 NRDC Consent Decree Industry Summary. Leather Tanning and Finish-
ing Industry.
Date: 6/23/80
V.6-5

-------
Coil Coating —
Development Document for Effluent Limitations Guidelines and
Standards for the Coil Coating paint Source Category. EPA 440/
l-79/071a, U.S. Environmental Protection Agency, Effluent Guide-
lines Division, Washington, D,C., August 1979.
OCiO NRDC Consent Decree Industry Summary - Coil Coating Industry.
Foundries --
QQI*] Foundry Industry (Contractor's Draft Report). Contract 68-01-
' 4379, U.S. Environmental Protection Agency,.Washington, D.C., May
1979.
€>05O NRDC Consent Decree Industry Summary - Foundries.
Porcelain Enameling —
0 £) a Development Document for Effluent Limitations Guidelines and
Standards for the Porcelain Enameling Point Source Category.
EPA-440/l-79/072a, U.S. Environmental Protection Agency,
Washington, D.C., August	. m*.
0O3Q NRDC Consent Decree Industry Summary t Porcelain Enameling
Industry_
Explosives Manufacture — ¦' *
Environmental Protection Agency Effluent Guidelines and Standards
for Explosives Manufacturing. 40 CRF 457; 41 FR 10180, March 9,
1976.
OO 3o NRDC Consent Decree Industry Summary - Explosive Manufacturing.
i Technical^Review of the BAT Analysis of the Explosives Industry
(draft contractor's report). U-. S. Environmental Protection
Agency, Washington, D.C., April 1979.
Gum and Wood Chemicals --
C0B0 NRDC Consent Decree Industry Summary - Gum ana Wood Chemicals
Industry "
00 aS" Technical. Review of the Best Available Technology, Best Demon-
strated Technology, and Pretreatment Technology for the Gum and
Wood Chemicals Point Source Category (draft contractor's report)
Environmental Science and Engineering, Inc.
Date :
6/23/80
V. 6-6

-------
Pharmaceutical Manufacturing —
OG&G Development Document for Interim Final Effluent Limitations
Guidelines and Proposed New Source Performance Standards for the
Pharmaceutical Manufacturing Point Source Category. EPA 400/
1-75/060. U.S. Environmental Protection Agency, Washington,
D.C., December 1976. 344 pp.
oo 13 Effluent Limitations Guidelines for the Pharmaceutical Manufac-
turing Industry (draft contractor's report). U.S. Environmental
Protection Agency, Washington, D.C., May 1979.
Environmental Protection Agency Effluent Guidelines and Standards
for Pharmaceutical Manufacturing. 40 CFR 439; 41 FR 50676,
November 17, 1976; Amended by 42 FR 6813, February, 1977.
OQftX Supplement to the Draft Contractor's Engineering Report for the
Development of Effluent Limitations Guidelines for the Pharma-
ceutical Industry (BATEA, NSPS, BCT, BMP, Pretreatment). U.S.
Environmental Protection Agency, Washington, D.C., July 1979.
Nonferrous Metals Manufacturing —
Draft Development Document for Effluent Limitations Guidelines
and Standards for the Nonferrous Metals Manufacturing Point
Source Category, Effluent Guidelines Division, Office of Water
and Waste management, U.S. Environmental Protection Agency,
September 1979.
Environmental Protection Agency - Effluent Guidelines and Stand-
ards for Nonferrous Metals. 40 CRF 421; 39 FR 12822, April 8,
1974; Amended by 40 FR 8514, February 27, 1975; 40 FR 48348,
October 15, 1975; 41 FR 54850, December 15, 1976.
OO30 NRDC Consent Decree Industry Summary - Nonferrous Metals Manu-
facturing Industry.
Ore Mining and Dressing —
OotS Development Document for BAT Effluent Limitations Guidelines and
New Source Performance Standards for the Ore Mining and Dressing
Industry, (draft contractor's report). Contract No. 68-01-4845,
U.S. Environmental Protection Agency,Washington, D.C., 25
September 1979.
Development Document for Effluent Limitations Guidelines and New
Source Performance Standards for the Ore Mining and Dressing
^	Point Source Category, Volumes I and'TI. U.S. Environmental
Protection Agency, Washington, D.C., July 1978.
Environment Reporter, EPA Effluent Guidelines and Standards for
Ore Mining and Dressing (40CRF440, November 6, 1975; 41 FR 21191,
Date: 6/23/80
V. 6-7

-------
May 24, 1976; 42 FR 3165, January 17, 1977, 43 FR 29771, July 11,
1978; 44 FR 7953, February 8, 1979; 44FR11546, March 1, 1979),
pg. 135:0881.
cose NRDC Consent Decree. Industry Summary - Ore Mining and Dressing.
Paint and Ink Formulation —
Environmental Protection Agency Effluent Guidelines and Standards
for Ink Formulating. 40 CFR 447; 40 FR 31723, July 28, 1975.
Environmental Protection Agency Effluent Guidelines and Standards
for Paint Formulating. 40 CFR 446; 40 FR 31723, July 28, 1975.
oaZo NRDC Consent Decree Industry Summary - Paint and Ink Formulation.
Technical Study Report BATEA-NSPS-PRETREATMENT, Effluent Limita-
tions Guidelines- for the Ink Manufacturing Industry (draft con-
tractor's report). Contract 68-01-3502, U.S. Environmental
Protection Agency, Washington, D.C., January 1979.
Technical Study Report BATEA-NSPS-PRETREATMENT, Effluent Limita-
tions Guidelines for the Paint Manufacturing Industry (draft
contractor's report). Contract 68-01-3502, U.S. Environmental
Protection Agency, Washington, D.C., January 1979.
ooS9
OlBf
ooS$
Petroleum Refining —
Development Document for Effluent Limitations Guidelines and New
Source Performance Standards for the Petroleum Refining Point
Source Category. EPA-440/l-74-014-a, U.S. Environmental Protec-
tion Agency, Washington, D.C., April 1974. 195 pp.
Development Document for Proposed Effluent Limitations Guidelines,
New Source Performance Standards, and Pretreatment Standards for
the Petroleum Refining Point Source Category. EPA 440/1-79/014-b,
U.S. Environmental Protection Agency, Washington, D.C., December
1979.
Draft Development Document Including the Data Base for the Review
of Effluent Limitations Guidelines (BATEA), New Source Perform-
ance Standards, and Pretreatment Standards for the Petroleum
Refining Point Source Category. U.S. Environmental Protection
Agency, Washington, D.C., March 1978.
OOi o Interim Final Supplement for Pretreatment to the Development
Document for the Petroleum Refining Industry Existing Point
Source Category. EPA-440/1-76/083A, U.S. Environmental Protec-
tion Agency, Washington, D.C., March 1977. 115 pp.
NRDC Consent Decree Industry Summary - Petroleum Refining.
Date: 6/23/80
V.6-8

-------
I
Pulp, Paper, and Paperboard Mills —
Environmental Protection Agency Effluent Guidelines ana Stand-
dards for Pulp, Paper and Paperboard (40 CFR 430; FR 18742, May
12, 1974; Amended as shown in Volume 40 Code of Federal Regula-
tions, Revised as of July 1, 1976; 41 FR 27732, July 6, 1976; 42
FR 1398; January 6, 1977).
0030 NRDC Consent Decree Industry Summary - Pulp, Paper, and Paper-
board Industry.
ooa*}
Preliminary Data Base for Review of BATEA Effluent Limitations
Guidelines, NSPS, and Pretreatment Standards, for the Pulp, Paper,
and Paperboard Point Source Category. Prepared for USEPA by E.
C.	Jordan Co., Inc., Portland, Maine 04112. Contract No. 68-01-
4624, June 1979.
Rubber Processing —
OOl% Review of Best Available Technology for the Rubber Processing
Point Source Category (draft contractor's report). Contract
68-01-4673, U.S. Environmental Protection Agency, Washington,
D.C.,	July 1978.
Environmental Protection Agency Effluent Guidelines and Standards
for Rubber Processing. 40 CFR 428; 39 FR 6660, February 21, 1974
(amended by 39 FR 26423, July 19, 1974; 40 FR 2334, January 10,
1975; 40 FR 18172, April 25, 1975 [effective May 27, 1975]; and
43 FR 6230, February 14, 1978).
NRDC Consent Decree Industry Summary - Rubber Processing.
Soaps and Detergents --
Development Document for Effluent Limitations Guidelines and New
Source Performance Standards for the Soap and Detergent Manufac-
turing Point Source Category. EPA-440/l-74-018a, U.S. Environ-
mental Protection Agency, Washington, D.C. April 1974.
Economic Analysis of Effluent Guidelines for the Soap and Deter-
gent Industry. EPA-230/2-73-026(PB 256 313), U.S. Environmental
Protection Agency, Washington, D.C., July 1976.
Project Recommendations for the Soap and Detergent Manufacturing
Industry (SIC 2841) BAT/Toxics Study. U.S. Environmental Protec-
tion Agency, Washington, D.C., November 1979.
Steam Electric Power Generating —
'vtl Development Document for Effluent Limitations Guidelines and New
Source Performance Standards for the Steam Electric Power Genera-
ting Point Source Category. EPA-440/1-74/029-a. U.S.
Date: 6/23/80
V. 6-9

-------
Environmental Protection Agency, Washington, D.C., October 1974.
842 pp.
0144,
Development Document for Proposed Effluent Limitations Guidelines
and New Source Performance Standards for the Steam Electric Power
Generating Point Source Category. EPA-440/1-73/029, U.S. Environ-
mental Protection Agency., Washington, D.C., March 1974. 677 pp.
OOOf$ Draft Technical Report for Recision of Steam Electric Effluent
Limitations Guidelines. U.S. Environmental Protection Agency,
Washington, D.C., September 1978. 607 pp..
Environmental Protection Agency Effluent Guidelines and Standards
for Steam Electir Power Generating. 40 CFR 423; 39FR 36186,
October 8, 1974, effective November 7, 1974; 40 FR 7095, February
19, 1975; 40 FR 23987, June 4, 1975; 42 FR 15690, March 23,
1977; 43 FR 43025, September 22, 1978; 43 FR 44848, September
29, 1978.
oo 30 NRDC Consent Decree Industry Summary - Steam Electric Power
Generating Industry.
ncQa Supplement for Pretreatment to the Development Document for the
Steam Electric Power Generating Point Source Category. EPA-400/
1-77/084, U.S. Environmental Protection Agency, Washington, D.C.,
April 1977. 244 pp.
Textile Mills --
MRC internal sampling data on file at Effluent Guidelines Divi-
sion of EPA, 1978.
oo 3© NRDC Consent Decree Industry Summary - Textile Mills.
Technical Study Report BATEA-NSPS-PSES-PSNS - Textile Mills Point
" Source Category (draft contractor's report). Contracts 68-01-
3289 and 68-01-3884, U.S. Environmental Protection Agency,
Washington, D.C., November 1978.
Timber Products Processing —
OoSo NRDC Consent Decree Industry Summary - Timber Products
Processing.
Revised Technical Review of the Best Available Technology. Best
Demonstrated Technology, and Pretreatment Technology for the
Timber Products Processing Point Source Category (draft contrac-
tor's report). Contract 68-01-4827, U.S. Environmental Protec-
tion Agency, Washington, D.C., October 1978.
Date: 6/23/80
V,6-10

-------
Publicly Owned Treatment Works (POTW'S) —
Fate of Priority Pollutants in Publicly Owned Treatment Works
-Pilot Study. EPA-440/1-79-300, U.S. Environmental Protection
Agency, Washington; D.C., October 1979.
References Used in Volume III
Argaman, Yerachmiel, and C. L. Weddle. Fate of Heavy Metals
Physical Treatment Processes. In: AIChE Symposium Series,
Volume 70, No. 136.
£©3^B°llyky, L. J. Ozone Treatment of CyanideBearing Plating Waste.
^EPA-600/2-77-104, U.S. Environmental Protection Agency, Cincin-
nati, Ohio, June 1977. 43 pp.
0/^7 Brandon, C. A., and J. J. Porter. Hyperfiltration for Renovation
* of Textile Finishing Plant Wastewater. EPA-600/ 2-76-060, U.S.
Environmental Protection Agency, Triangle Park, North Carolina,
March 1976. 147 pp.
Brunotts, V. A., R. S. Lynch, G. R. Van Stone. Granular. Carbon
Handles Concentrated Waste. Chemical Engineering Progress,
6(8):81-84, 1973.
Chian, E. S. K. , M. N. Aschauer, and H. H. P. Fang. Evaluation
of New Reverse Osmosis Membranes for the Separation of Toxic
Compounds from Wastewater. Contract No. DADA 17-73-C-3025, U.S.
Army Medical Research and Development Command, Washington, D.C.,
October 1975. 309 pp.
01*^*1 coco, J. H., E. Klein, D. Howland, J. H. Mayes, W. A. Myers, E.
Pratz, C. J. Romero, and F. H. Yocum. Development of Treatment
and Control Technology for Refractory Petrochemical Wastes (draft
report). Project No. S80073, U.S. Environmental Protection
Agency, Ada, Oklahoma. 220 pp.
0/^5^ Davis, H. J., F. S. Model, and J. R. Leal. PBI Reverse Osmosis
Membrane for Chromium Plating Rinse Water. EPA-600/2-78-040.
U.S. Environmental Protection Agency, Cincinnati, Ohio, March
1978. 28 pp.
De, J., B. Paschal, and A. D. Adams. Treatment of Oil Refinery
Wastewaters with Granular and Powdered Activated Carbon. In:
Thirtieth Industrial Waste Conference, Purdue University,
Indiana, May 1975. pp. 216-232.
De, J. ana B. Paschal. The Effectiveness of Granular Activated
Carbon in Treatability Municipal and Industrial Wastewater. In:
Third National Conference on Complete Water Reuse, AIChE ana EPA
Technology Transfer, June 1976. pp. 204-211.
Date: .6/23/80
V.6.-11

-------
oo/S
06/6 Development Document for BAT Effluent Limitations Guidelines and
New Source Performance Standards for Ore Mining and Dressing
Industry. No. 6332-M.l, A Division of Calspan Corporation,
Buffalo, New York, 1979.
0/4S Development Document for Effluent Limitations Guidelines and New
Source Performance Standards for the Dairy Products Processing
Point Source Category. EPA-440/l-74-021a, U.S. Environmental
Protection Agency, Washington, D.C., May 1974. 167 pp.
Development Document for Effluent Limitations Guidelines ana New
Source Performance Standards for the Fish Meal, Salmon, Bottom
Fish, Clam, Oyster, Sardine, Scallop, Herring, and Abalone,
Segment of the Canned and Perserved Fish and Seafood Processing
Industry, Point Source Category. EPA-440/l-75-041a, U.S. Envi-
ronmental Protection Agency, Washington, D.C., September 1975.
485 pp.
oo&& Development Document for Effluent Limitations Guidelines and New
Source Performance Standards for the Leather Tanning and Finish-
ing Point Source Category. EPA-440/l-74-016a, U.S. Environmental
Protection Agency, Washington, D.C., March 1974. 157 pp.
L* Devel°Pment Document for Effluent Limitations Guidelines and New
^ Source Performance Standards for the Plywood, Hardboard and Wood
Preserving Segment of the Timber Products Processing Point Source
Category. EPA-440/l-74-023a, U.S. Environmental Protection
Agency, Washington, D.C., April 1974.

Development Document for Effluent Limitations Guidelines and New
Source Performance Standards for the Synthetic Resins, Segment of
the Plastics and Synthetic Materials Manufacturing Point Source
Category. EPA-440/l-74-010a, U.S. Environmental Protection
Agency, Washington, D.C., March 1974. 238 pp.
Development Document for Effluent Limitations Guidelines and New
Source Performance Standards for the Tire; and Synthetic Segment
of the Rubber Processing Point Source Category. EPA-440/
l-74-013a, U.S. Environmental Protection Agency, Washington,
D.C., February 1974. 193 pp.
OOoQ Development Document for Effluent Limitations Guidelines and
* Standards for the Leather Tanning and Finishing Point Source
Category. EPA-440/1-79-016. U.S. Environmental Protection
Agency, Washington, D.C., July 1979. 381 pp.
Development Document for Effluent Limitations Guidelines and
Standards for the Nonferrous Metals Manufacturing Point Source
Category. EPA-440/l-79-019a, U.S. Environmental Protection
Agency, Washington, D.C., September 1979. 622 pp.	.
Date: 6/23/80
V. 6.- 12

-------
&&II| Development Document for Effluent Limitations Guidelines and
' Standards for the Pesticide Chemicals Manufacturing Point Source
Category. EPA-440/l-78-060e, U.S. Environmental Protection
Agency, Washington, D.C., April 1978. 316 pp.
OO Devel°Pment Document for Interim Final and Proposed Effluent
' Limitations Guidelines and New Source Performance Standards for
the Fruits, Vegetables, and Specialties Segment of the Canned and
Preserved Fruits and Vegetables Point Source Category. EPA-440/
1-75-046, U.S. Environmental Protection Agency, Washington, D.C.,
October 1975. 520 pp.
Q	Development Document for Interim Final Effluent Limitations
' Guidelines and New Source Performance Standards for the Primary
Copper Smelting Subcategory of the Copper Segment of the Non-
ferrous Metals Manufacturing Point. Source Category. EPA-440/1
l-75-032b, U.S. Environmental Protection Agency, Washington,
D.C., February 1975. 213 pp.
Development Document for Interim Final Effluent Limitations
Guidelines and Proposed New Source Performance Standards for the
Gum and Wood Chemicals Manufacturing. EPA 440/1-76, U.S. Envi-
ronmental Protection Agency, Washington, D.C., April 1976.
OCCI Development Document for Interim Final Effluent Limitations,
Guidelines and Proposed New Source Performance Standards for the.
Hospital Point Source Category. EPA-440/l-76-060n, U.S. Environ-
mental Protection Agency, Washington, D.C., April 1976. 131 pp.
&O&0 Development Document for Interim Final Effluent Limitations
Guidelines and Proposed New Source Performance Standards for the
Pharmaceutical Manufacturing, Point Source Category. EPA-440/
1-75-060, U.S. Environmental Protection Agency, Washington, D.C.,
December 1976. 331 pp.
0/6^ Development Document for Interim Final Effluent Limitations
Guidelines and Proposed New Source Performance Standards for the
Raw Cane Sugar Processing Segment of the Sugar Processing Point
Source Category. EPA-440/1-75-044, U.S. Environmental Protection
Agency, Washington, D.C., February 1975. 291 pp.
£)©0«l Development Document for Interim Final Effluent Limitations
Guidelines and New Source Performance Standards for the Mineral
Mining and Processing Industry Point Source Category. EPA-440/
l-76-059a, U.S. Environmental Protection Agency, Washington,
D.C., June 1976. 432 pp.
Development Document for Proposed Effluent Limitations Guidelines
and New Source Performance Standards for the Major Organic Prod-
ucts Segment of the Organic Chemicals Manufacturing Point Source
Category. EPA-440/1-73-009, U.S. Environmental Protection
Agency, Washington, D.C., December 1973. 369 pp.
Date: 6/23/80
V. 6.-13

-------
Development Document for Proposed Existing Source Pretreatment
Standards for the Electroplating, Point Source Category. EPA-440/
1-78-085, U.S. Environmental Protection Agency, Washington, D.C.,
February 1978. 532 pp.
Draft Contractor's Engineering Report for Development of Effluent
Limitations Guidelines for the Pharmaceutical Manufacturing
Industry (BATEA, NSPS, BCT, BMP, Pretreatment), July 1979, U.S.
Environmental Protection Agency, Washington, D.C.
Draft Development Document for Inorganic Chemicals Manufacturing
Point Source Category - BATEA, NSPS, .and Pretreatment Standards
(contractor's draft report). Contract 63-01-4492, U.S. Environ-
mental Protection Agency, Effluent Guidelines Division, Washing-
ton, D.C., April 1979.
one Draft Development Document for Proposed Effluent Limitations
Guidelines and Standards for the Iron and Steel Manufacutring
Point Source Category, Volume I. EPA-440/l-79/024a, U.S. Environ-
mental Protection Agency, Washington, D.C., October 1979.
220 pp.
OilJ Draft Development Document for Proposed Effluent Limitations
*	Guidelines and Standards for the Iron and Steel Manufacturing
Point Source Category, Volume II. EPA-440/l-79/024a, U.S. Envi-
ronmental Protection Agency, Washington, D.C., October 1979.
272 pp.
Draft Development Document for Proposed Effluent Limitation
Guidelines and Standards for the Iron and Steel Manufacturing
Point Source Category, Volume III. EPA-440/l-79/024a, U.S.
Environmental Protection Agency, Washington, D.C., October 1979.
308 pp.
&U3L Dra^t Development Document for Proposed Effluent Limitations
Guidelines and Standards for the Iron and Steel Manufacturing
Point Source Category, Volume IV. EPA-440/l-79/024a, U.S. Envi-
ronmental Protection Agency, Washington, D.C., October
1979. 446 pp.
Oi^O Dra^t Development Document for Proposed Effluent Limitations
* Guidelines and Standards for the Iron and Steel Manufacturing
Point Source Category, Volume V. EPA-440/l-79/024a, U.S. Envi-
ronmental Protection AGency, Washington, D.C.., October 1979.
435 pp.
(fti (i>I Draft Development Document for Proposed Effluent Limitations
•	Guidelines and Standards for the Iron and Steel Manufacturing
Point Source Category, Volume VI. EPA-440./l-79/024a, U.S. Envi-
ronmental Protection Agency, Washington, D.C., October 1979.
389 pp.
Date: 6/23/80
* V.6.-14

-------
i/3
OH«f
Draft Development Document for Proposed Effluent Limitations
Guidelines and Standards for the Iron and Steel Manufacturing
Point Source Category, Volume VII. EPA-440/l-79/024a, U.S.
Environmental Protection Agency, Washington, D.C., October 1979
419 pp.
Draft Development Document for Proposed Effluent Limitations
Guidelines and Standards for the Iron and Steel Manufacturing
Point Source Category, Volume VIII. EPA-440/l-79/024a, U.S.
Environmental Protection Agency, Washington, D.C., October 1979
768 pp.
Draft Development Document for Proposed Effluent Limitations
. Guidelines and Standards for the Iron and Steel Manufacturing
Point Source Category, Volume IX. EPA-440/l-79/024a, U.S<
Environmental Protection Agency, Washington, D.C., October 1979.
758 pp.
&0O3 Draft Technical Report for Revision of. Steam Electric Effluent
Limitations Guidelines, September 1978, U.S. Environmental Protec-
tion Agency, Washington, D.C.
£)j£iC Effects of Liquid Detergent Plant Effluent on the Rotating Bio-
logical Contactor. EPA-600/2-78-129, U.S. Environmental Protec-
tion Agency, Cincinnati, Ohio, June 1978. 58 pp.
o oSt Effluent Limitations Guidelines (BATEA), New Source Performance
Standards and Pretreatment Standards for the Petroleum Refining
Point Source Category, March 1978, U.S. Environmental Protection
Agency, Washington, D.C.
OlSo Effluent Limitations Guidelines for the Ink Manufacturing Indus-
try (BATEA, NSPS, Pretreatment), January 1979, U.S. Environmental
Protection Agency, Effluent Guidelines Division, Washington, D.C.
QOO+
Effluent Limitations Guidelines for the Paint Manufacturing
Industry, January 1979, U.S. Environmental Protection Agency,
Washington, D.C.
Extraction of Chemical Pollutants from Industrial Wastewaters
with Volatile Solvents. EPA-600/2-76-220, U.S. Environmental
Protection Agency, Ada, Oklahoma, December 1976. 510 pp.
ggj"! Foundry Industry (contractor's draft report). Contract No.
68-01-4379, U.S. Environmental Protection Agency, Washington,
D.C., May 1979.
£)&!£ Interim Final Supplement for Pretreatment to the Development
' Document for the Petroleum Refining Industry Existing Point
Source Category. EPA-440/1-76, U.S. Environmental Protection
Agency, March 1977.
Date: 6/23/80
V.6.-15

-------
<£>oSa Kleper, M. H., A. 2. Gollan, R. L- Goldsmith and K. J. McNulty.
Assessment of Best Available Technology Economically Achievable
for Synthetic Rubber Manufacturing Wastewater. EPA-600/2-78-192,
U.S. Environmental Protection Agency, Cincinnati, Ohio, August
1978.	182 pp.
Kleper, M. H., R. L. Goldsmith, and A. Z. Gollan. Demonstration
* " of Ultrafiltration and Carbon Adsorption for Treatment of Indus-
trial Laundering Wastewater. EPA/2-78-177, U.S. Environmental
Protection Agency, Cincinnati, Ohio, August 1978. 109 pp.
KlePer» M. H., R. L. Goldsmith, T. V. Tran, D. H. Steiner, J.
** Pecevich, and M. A. Sakillaris. Treatment of Wastewaters from
Adhesives and Sealants Manufacturing by Ultrafiltration. EPA-600/
2-78-176, U.S. Environmental Protection Agency, Cincinnati, Ohio,
August 1978.
0037 Klieve, J. R., and G. D. Rawlings. Source Assessment: Textile
Plant Wastewater Toxics Study Phase II. Contract No. 68-02-1874,
U.S. Environmental Protection Agency, Washington, D.C., April
1979.	127 pp.
Lang, W. c., J. H. Crozier, F. P. Drace, and K. H. Pearson.
Industrial Wastewater Reclamation with a 400,000-gallon-per-day
Vertical Tube Evaporator. EPA-600/2-76-260, U.S. Environmental
Protection Agency, Cincinnati, Ohio, October 1976. 90 pp.
'S3 McNulty, K. J., R. L. Goldsmith, A. Gollan, S. Hossain, and D.
Grant. Reverse Osmosis Field Test:. Treatment of Copper Cyanide
Rinse Waters, EPA-600/2-77-170, U.S. Environmental Protection
Agency, Cincinnati, Ohio, August 1977. 89 pp.
00$7 Olem, H. The Rotating Biological Contactor for Biochemical
Ferrous Iron Oxidation in the Treatment of Coal Mine Drainage.
No. W77-05337, Penn State University, Pennsylvania, November
1975.
AA2I Petersen, R. J., and K. E. Cobian. New Membranes for Treating
* Metal Finishing Effluents by Reverse Osmosis. EPA-600/2-76-197,
U.S. Environmental Protection Agency, Cincinnati, Ohio, October
1976.	59 pp.
Preliminary Data Base for Review of BATEA Effluent Limitations
Guidelines, NSPS, and Pretratment Standards for the Pulp, Paper,
and Paperboard Point Source Category, June 1979, U.S. Environ-
mental Protection Agency, Washington, D.C.
Priority Pollutant Treatibility Review, Industrial Sampling and
Assessment. Contract 68-03-2579, U.S. Environmental Protection
Agency, Cincinnati, Ohio, July 1978. 47 pp.
Date: 6/23/80
V.6.-16

-------
Putting Powdered Carbon in Wastewater Treatment. Environmental
Science and Technology, Volume II, No. 9, September 1977.
oo 38 Rawlings, G. D. Evaluation of Hyperfiltration Treated Textile
Wastewaters. Contract 68-02-1874, U.S. Environmental Protection
Agency, Washington, D.C., November 1978.
Raw^n9s<' G- D- Source Assessment: Textile Plant Wastewater
Toxics Study Phase I. EPA-600/2-78-004h, U.S. Environmental
Protection Agency, Triangle Park, North Carolina, March 1979.
153 pp.
ooit Review of the Best Available Technology for the Rubber Processing
Point Source Category, July 1978, U.S. Environmental Protection
Agency, Washington, D.C.
Revised Technical Review of the Best Available Technology, Best
Demonstrated Technology, and Pretreatment Technology for the
Timber Products Processing Point Source Category (draft con-
tractors report). Contract 68-01-4827, U.S. Environmental Pro-
tection Agency, Washington, D.C., October 1978. '
o/s
-------
t 33 Treatment and Recovery of Fluoride Industrial Wastes. No. PB 234
447, Grumman Aerospace Corporation. Bethpage, N.Y., March 1974.
References Used in Volume IV
Innovative and Alternative Technology Assessment Manual, EPA-430/
« 9-78-009 (draft), U.S. Environmental Protection Agency,
Cincinnati, Ohio, 1978. 252 pp.
Metcalf and Eddy. Wastewater Engineering: Collection Treatment,
Disposal. McGraw-Hill Book Co., New York, New York, 1972. pp.
662-667.
Physical, Chemical, and Biological Treatment Techniques for
Industrial Wastes, PB 275 287, U.S. Environmental Protection
Agency, Washington, D.C., November 1976.
B. REFERENCES EXAMINED BUT NOT USED
Chen, Ching-lin, and R. P. Miele. Wastewater Demineralizing by
Continuous Countercurrent Ion Exchange Process. EPA-600/2-77-152
(PB 272 301), U.S. Environmenental Agency, Cincinnati, Ohio,
September 1977. 50 pp.
Clark, D. P., L. W. Poulter, 0. W. Wilson, and W. N. Christensen.
The Treatment and Analysis of Cyanide Wastewater. AFCEC-TR-74-5,
Air Force Civil Engineering Center, Tyndall AFB, Florida,
February 1975. 122 pp.
Cochrane, W., J. Burm, and A. Dostal. Cannery Wastewater Treat-
ment with Rotating Biological Contactor and Extended Aeration.
EPA-R2-73-024 (PB 221 333), U.S. Environmental Protection Agency,
Corvallis, Oregon, April 1973. 62 pp.
Eaddy, J. M. Jr., and J. W. Vann. Physical/Chemical Treatment of
Textile Finishing Wastewater for Process Reuse. EPA-600/2-78-
079 (PB 281 276), U.S. Environmental Protection Agency, Research
Triangle Park, North Carolina, April 1978. 141 pp.
Ellerbusch, F., and H. S. Skovronek. Oxidative Treatment of
Industrial Wastewater. EPA-600/J-77-057 (PB 276 268), US. Envi-
ronmental Protection Agency, Cincinnati, Ohio. 11 pp.
Gardner, F. H., Jr., and A. R. Williamson. Naval Stores Waste-
water Purification and Reuse by Activated Carbon Treatment.
EPA-600/2-76-227, U.S. Environmental Protection Agency,
Cincinnati, Ohio, October 1976. 45 pp.
Handling, Treatment, and Disposal of Wastewater Sludge. In: The
USA/USSR Symposium on Handling, Treatment, and Disposal of Waste-
water Sludge, Moscow, USSR, 1975. 155 pp.
Date: 6/23/80
V. 6.-18
-------