CHANGE FORTHE
ENERGY STAR
U.S. Environmental
Protection Agency
uct Sealing
EPA 430-F-04-048 October 2004
-------
-JH'
HIGH UTILITY BILLS?
STUFFY ROOMS? DUSTY HOUSE?
IT COULD BE YOUR DUCTS.
A duct system that is well-designed and properly sealed can
make your home more comfortable, energy efficient, and
safer. Here are some reasons why duct improvements can be
a wise investment:
Comfort
Sealing and insulating ducts can help with common comfort
problems, such as rooms that are too hot in the summer or too
cold in the winter.
Indoor Air Quality
Fumes from household and garden chemicals, insulation
particles, and dust can enter your duct system, aggravating
asthma and allergy problems. Sealing ducts can help improve
indoor air quality by reducing the risk of pollutants entering
ducts and circulating through your home.
Safety
During normal operation, gas appliances such as water
heaters, clothes dryers, and furnaces release combustion
gases (like carbon monoxide) through their ventilation
systems. Leaky ductwork in your heating and cooling system
may cause "backdrafting," where these gases are drawn
back into the living space, rather than expelled to the
outdoors. Sealing leaks can minimize this risk.
Save Money
Leaky ducts can reduce heating and cooling system efficiency
by as much as 20 percent. Sealing and insulating ducts
increases efficiency, lowers your energy bills, and can often
pay for itself in energy savings. Plus, if you're planning to
install new heating and cooling equipment, a well-designed
and sealed duct system may allowyou to downsize to a
smaller, less costly heating and cooling system that will
provide better dehumidification.
Protect the Environment
Energy used in our homes often comes from the burning of
fossil fuels at power plants, which contributes to smog, acid
rain, and global warming. Simply put, the less energy we use
in our homes, the less air pollution we generate. By sealing
your ducts and reducing the amount of energy necessary to
comfortably heat or cool your home, you can reduce the
amount of air pollution generated.
-------
WHAT IS
ENERGY STAR8?
ENERGY STAR is the government-backed program that
helps us all to save money and protect our environment
with energy-efficient products and practices. Whether
you are looking to replace old appliances, remodel your
home, or buy a new house, ENERGY STAR can help.
More than 40 kinds of products, including lighting,
appliances, televisions, computers, heating and
cooling equipment, and even new homes, can earn
the government's ENERGY STAR label. ENERGY STAR
also offers best practice solutions, like home sealing
and duct sealing, that can make your home more
comfortable and reduce your energy costs.
For more information on duct sealing,
visit www.energystar.gov
or call
1-888-STAR-YES (1-888-782-7937)
CHANGE FORTHE
BETTER WITH
ENERGYSTAR
KNOW YOUR DUCTS
In houses with forced-air heating and cooling systems, ducts
are used to distribute conditioned air throughout the house.
In a typical house, however, about 20% of the air that moves
through the duct system is lost due to leaks, holes, and
poorly connected ducts. The result is higher utility bills and
difficulty keeping the house comfortable, no matter how the
thermostat is set.
How do you know that your home has poorly performing
ducts? You may have duct problems if:
•you have high summer and winter utility bills;
• you have rooms that are difficult to heat and cool;
•you have stuffy rooms that never seem to feel comfortable;
•your ducts are located in an attic, crawlspace, or
the garage;
• you find tangled or kinked flexible ducts in your system.
SIMPLE STEPS TO IMPROVING
DUCT PERFORMANCE
Because ducts are often concealed in walls, ceiling, attics,
and basements, repairing them can be difficult. But there
are things thatyou can do to improve duct performance in
your house.
Start by sealing air leaks using mastic sealant or metal
tape and insulating all the ducts thatyou can access (such
as those in attics, crawlspaces, unfinished basements, and
garages). Never use duct tape, as it is not long-lasting.
Also, make sure that the connections at vents and
registers are well-sealed where they meet the floors,
walls, and ceiling. These are common locations to find
leaks and disconnected ductwork.
-------
COMMON DUCT PROBLEMS
© Leaky duct connection (j| Fallen duct
insulation
© Furniture blocking
egister
® Leaks at furnace &
filter slot and duct tape
(j> Supply leaks
© Kinks in ductwork
restricting airflow
WORKING WITH A CONTRACTOR
Many homeowners choose to hire a professional contractor
for duct improvement projects. Most heating and cooling
equipment contractors also repair ductwork. Look for a
contractor that will:
Inspect the whole duct system, including attic and
crawlspaces.
Evaluate the system's supply and return air balance.
Many systems have air return ducts that are too small.
Repair damaged and disconnected ducts and straighten
out flexible ducts that are tangled or crushed.
Seal all leaks and connections with mastic, metal tape,
or an aerosol-based sealant.
Seal all registers and grills tightly to the ducts.
Insulate ducts in unconditioned areas (like attics,
crawlspaces, and garages) with duct insulation that
carries an R-value of 6 or higher.
Include a new filter as part of any duct system improvement.
The contractor should evaluate air flow after repairs are
completed.
Ensure there is no backdrafting of gas or oil-burning
appliances, and conduct a combustion safety test
after ducts are sealed.
------- |