U.S. Environmental Protection Agency
Central Data Exchange
Central Data Exchange (CDX) and
Computer Sciences Corporation (CSC)
Verify Project
Verify Maintenance Release
Software Release Notes
Release 4.b.4
Front-end and Back-end
December 19, 2008
Prepared for:
U.S. Environmental Protection Agency
Contract Number: GSOOT99ALD0203
Task Order Number: T0002AJ M 038
Verify Maintenance Release, R4.b.4
December 19, 2008
-------
U.S. EPA CDX/Verify
Verify Maintenance Release 4.b.4, Software Release Notes
Revision History
Change Record
Version
Number
1.0
Description of Change
Initial Publication
Change
Effective Date
12/19/2008
Change
Entered By
A. Marsh
Verify Maintenance Release, R4.b.4
December 19, 2008
-------
U.S. EPA CDX/Verify Verify Maintenance Release 4.6.4, Software Release Notes
Table of Contents
Section 1. Introduction 1-1
1.1 Purpose and Scope 1-1
1.2 Documentation Organization 1-1
1.3 References and Related Documentation 1-1
1.4 Document Maintenance 1-1
Section 2. System Overview 2-1
2.1 Software Requirements 2-1
2.2 Hardware Requirements 2-1
2.3 Known Limitations 2-1
2.4 External Dependencies 2-1
Section 3. Release Content 3-1
3.1 New features and the fixes for manufacturers: 3-1
3.2 New features and the fixes for EPA 1
Section 4. Change Requests (CRs) Included in Verify Maintenance R4.b.3.1 7
Abbreviations and Acronyms 13
Verify Maintenance Release, R4.b.4 ii December 19,2008
-------
U.S. EPA CDX/Verify Verify Maintenance Release 4.6.4, Software Release Notes
Section 1. Introduction
1.1 Purpose and Scope
The Software Release Notes (SRNs) document is provided for the Verify Maintenance
Release, R4.b., which occurred on December 19, 2008 for the Front-end and Back-end.
The SRNs address the system software and hardware requirements, any known
limitations, release content regarding the specific change requests (CRs), and how the
changes provide a benefit for Manufacturers and EPA.
1.2 Documentation Organization
This document is organized into the following sections:
Section 1, Introduction - Provides the purpose and organization of this document
Section 2, System Overview - Provides general system functionality, any software, and
hardware requirements, known limitations, and external dependencies.
Section 3, Release Content - Provides change requests (CRs) with a description of the
new features and the benefits from the enhancements for Manufacturers or EPA.
Abbreviations and Acronyms - Defines abbreviations and acronyms used throughout
this document.
1.3 References and Related Documentation
The stated requirements and associated documentation for each Change Request (CR)
are located in Verify Data Repository (ClearQuest). In addition, the System
Requirements Specifications (SRS), System Design Document (SDD), Database
Design Documents (DBDD) are located in Verify Subversion Document Repository.
The documents were provided to EPA for Verify Release, R4.b.
1.4 Document Maintenance
This document is stored in the Verify Subversion Document Repository. A new SRNs
document is submitted with subsequent releases.
Verify Maintenance Release, R4.b.4 1-1 December 19,2008
-------
U.S. EPA CDX/Verify Verify Maintenance Release 4.6.4, Software Release Notes
Section 2. System Overview
Background:
• The Office of Transportation and Air Quality (OTAQ) protects the public's health
and the environment by controlling air pollution from motor vehicles, engines, and
the fuels used to operate them, and by encouraging travel choices that minimize
emissions. These "mobile sources" include cars, light trucks, large trucks, buses,
motorcycles, non-road recreational vehicles (such as dirt bikes and
snowmobiles), large off-road vehicles (construction and specialized equipment),
farm vehicles, lawn and garden equipment, marine engines, aircraft, and
locomotives.
• OTAQ requires all manufacturers to register the vehicles/engines they are using
for test purposes, to perform emissions testing, to submit the results of that
testing along with additional supporting documentation, and to request and
receive permission prior to entering the engine into commerce.
The Verify system is composed of two distinct applications. The first is the
Manufacturer Interface (called the Front-end). This application is used by the
manufacturers to submit data to the Verify system. It provides web screens to assist the
manufacturers in the submission of the data and can accept machine generated
submissions. The second application is the EPA Interface (called the Back-end). EPA
users primarily interact with this application. It provides web screens in order for EPA
compliance activities to be accomplished.
2.1 Software Requirements
The detailed software requirements are defined within each associated change request
(CR) located in Verify Data Repository (ClearQuest).
2.2 Hardware Requirements
There were no specific hardware requirements. Verify Emergency Maintenance
Release 4.b.4 will use existing CDX hardware.
2.3 Known Limitations
The Front-end CDX system will not work with Firefox Release 3. The Back-end Verify
Portal will not function with Internet Explorer version 6. The timer in the lower left corner
of the screen will not function properly in Internet Explorer 7.
2.4 External Dependencies
This release is dependent on EPA Portal and CDX technologies.
Verify Maintenance Release, R4.b.4 2-1 December 19,2008
-------
U.S. EPA CDX/Verify Verify Maintenance Release 4.6.4, Software Release Notes
Section 3. Release Content
3.1 New features and the fixes for manufacturers:
Industry Verify Light-Duty:
Title: LD: 4B: New Industry: Portable Fuel Container (CR #57444)
Description: Add a new industry 'Portable Fuel Container' to the manufacturer
information (and manufacturer registration) modules. Also include new industries for
"ICI: Light-Duty"", Alternative Fuel Converter (Light-Duty/Heavy-Duty Chassis Certified),
and "Nonroad / Stationary Spark-Ignited Evaporative Component.
• Benefit: Added new industries "Portable Fuel Container"", ICI: Light-Duty",
Alternative Fuel Converter (Light-Duty/Heavy-Duty Chassis Certified)" and
"Nonroad / Stationary Spark-Ignited Evaporative Component" to manufacturer
information.
Title: LD: 4B: Tl: BRs: Duplicate Test Result Names should not be allowed for same
test (CR #77128)
Description: A business rule is needed to prohibit entry of duplicate test result names
for the same test.
• Benefit: This is a new business rule that will reject a Test Information dataset if
it has two Test Results with the same name.
Title: LD: 4B: Add New Document Type (CR #77460)
Description: Add the Document Type of "Alternative Fuel Conversion Data Submission
Form (>3 years and >50,000 miles)" to the Front-end and Back-end document module.
Also, add new Compliance Document Type of "Model Year 2008&2009 CAFE Data
File".
• Benefit: Added new Compliance Document Types "Alternative Fuel Conversion
Data Submission Form (>3 years and >50,000 miles)" and "Model Year
2008&2009 CAFE Data File".
Title: LD: 4B: Document Module Changes to support HDIU (CR #77480)
Description: Increase the allowed size of Original Document Name to 100 characters.
Include the Original Document Name in the subject and body of Inbox messages.
• Benefit: Increased the allowed size of the "Document Path and File Name" and
"Path and File Name of Same Document in Alternate Format" in the Document
Upload screen from 50 characters to 100 characters.
Title: LD: 4B: Only send one inbox message per submission(CR #77483)
Description: Right now, HDIU users get an Inbox message when they submit a file and
another when the backend receives it. They should only get the second.
• Benefit: HDIU users will now only get one Inbox message when they submit a
file. Previously they would get one message from CDX when they submitted the
file and another from Verify after it was received by the backend. They should
now only get the second message.
Verify Maintenance Release, R4.b.4 3-1 December 19,2008
-------
U.S. EPA CDX/Verify Verify Maintenance Release 4.6.4, Software Release Notes
Title: LD: 4B: HDIU Schema Changes for November '08 (CR #77486)
Description: Mostly making fields optional or changing the format, however, renaming
a few. Synchronizing the data requirements document.
• Benefit: This involved changes to the HDIU schema, mostly making fields
optional or changing the format.
Title: LD: 4B: FE: VI Review page (CR #77497)
Description: The comments should be formatted so the carriage returns are displayed
properly.
• Benefit: Fixed the formatting of comments on the Vehicle Information review
page so that the carriage returns are displayed properly.
Title: LD: 4B: FE: Test Info Help Button (CR #77499)
Description: I can click on the white space near the top of the page and get the help
page to come up.
• Benefit: This fixed a bug on the Test Information screen that would cause the
Help page to come up if the white space near the top of the page was clicked.
Title: LD: 4B: Business Rules: Fuel Props Corrections to Fuel Props with Tests should
be rejected (CR #77511)
Description: If a correction is submitted to a Fuel Properties dataset and that dataset
is already referenced by an active Test Info dataset then it should be rejected.
• Benefit: This is a new business rule that will reject a correction to a Fuel
Properties dataset if it is already referenced by a Test Information dataset.
Title: LD: 4B: FE: Add additional field to FE Label Subconfiguration (CR #77683)
Description: On the "Base Level Information" tab, in the "Subconfiguration Info" box,
a new table needs to be added above the "Test Info" table that is called
"Subconfiguration Sales Information". This table will include two of the data elements
that are already in the Subconfiguration box (Subconfiguration Projected Sales and Test
Group) plus three new data elements (Mfr Code, Division Code, Carline Code). This
will involve changing the xml schema and database tables. There are also some
changes requested for some of the field labels on the submission screen.
• Benefit: The FE Label schema, screens, and database tables were modified to
allow manufacturers to specify Subconfiguration Projected Sales information by
different Mfr Code, Division Code, Carline Code, and Test Group combinations.
Title: LD: 4B: FE: SS: The "Review and Submit" button on Shift Schedule Save2 page
links to wrong screen (CR #77706)
Description: The 'Review and Submit' button on the Shift Schedule Save2 page links to
Decision Info instead of Shift Schedule
• Benefit: This fixed a bug in the Shift Schedule "Save" page. Previously the
"Review and Submit" button on the second Save page would link back to a blank
Decision Info page instead of the Shift Schedule page.
Title: LD: 4B: Changes to CSI report (CR #77733)
Verify Maintenance Release, R4.b.4 3-2 December 19,2008
-------
U.S. EPA CDX/Verify Verify Maintenance Release 4.6.4, Software Release Notes
Description: Make the following changes to the CSI Report:
1) In the standards sections, attempt to line up the values under the headings better.
Currently, it appears as though the headings are left justified and the values are
centered.
2) In both the Models section and the standards section, the Cert Region Code should
be displayed as either "CA" or "Fed". Currently, this is using the database code (CA or
FA), so a system will have to be devised for transforming the code into an "abbreviated
description" (as opposed to the regular description).
3) Standards information should never be displayed on a page without the associated
Test displayed as a (2nd) header at the top of the page (underneath the report header).
If this causes a group of standards to have to be broken into displaying on multiple
pages that is fine as long as the test is displayed on each of those pages.
• Benefit: Changes were made to the CSI report to improve readability. This
included lining up values under headings better, displaying the Certification
Region Code as 'Fed' or 'CA, and changing the pagination so that standards
information is always displayed on the same page with its associated Test
information.
Title: LD: 4B: FE: Shift schedule breadcrumbs incorrect on Success page (CR #77787)
Description: The breadcrumbs on the Shift Schedule success page are for decision
info instead of Shift Schedule.
• Benefit: This fixes a bug in the Shift Schedule screen. Previously, the
breadcrumbs on the Shift Schedule success page were for Decision Info instead
of Shift Schedule.
Title: LD: 4B: FE: Supplemental Info - Need better error message for Emission
Standard Value (CR #77797)
Description: The Error message should state what the format for Emission Standard
Value is.
• Benefit: The validation error message for Emission Standard values on the Test
Group and Supplemental Info pages has been improved. Previously, it was only
stating, "The Emission Standard Value is in invalid format". The message now
displays what the valid format should be.
Title: LD: 4B: FE: Shift Schedule - "Return to Confirmatory Test Home Page" button on
success page does not work (CR #77798)
Description: The issue is that the "Return to Confirmatory Test Home Page" button on
the success screen after submission does not work. Get the following error message:
Invalid path /lightduty/conftest/home was requested
• Benefit: This fixes a bug in the Shift Schedule screen. Previously, the "Return to
Confirmatory Test Home Page" button on the success screen did not work.
Title: LD: 4B: FE: CTDI - Change label name to Vehicle Model Name (Carline)
(CR #77800)
Verify Maintenance Release, R4.b.4 3-3 December 19,2008
-------
U.S. EPA CDX/Verify Verify Maintenance Release 4.6.4, Software Release Notes
Description: Add '(Carline)' to the Vehicle Model Name label on the Decision Info
screen.
• Benefit: This adds the text '(Carline)' to the Vehicle Model Name label on the
Decision Information screen.
Title: LD: 4B: FE: Test Group: Problem with Engine Configuration Number (CR #77801)
Description: On the Test Group Dataset Submission, Engine Configuration tab, there is
no box to enter engine configuration number, and when I click on Review and Submit,
an error is received: Engine Configuration Number is a required field.
Steps to replicate this error:
Enter Test Group New Dataset
Click on Engine configuration, you see 1 as default value
Click on Save Form. Click on Save. Click Cancel
Now click Review and Submit. The default value for Engine configuration vanishes
• Benefit: This fixes a bug on the Test Group screen. Previously there was a
problem with the test box for the Engine Configuration Number not being visible
under certain conditions.
Title: LD: 4B: BR: Cert Request - Business rules require answers to questions that do
not apply to electric vehicles (CR #77859)
Description: Some of the questions on the Certificate Request Screen do not apply to
electric vehicles, but they still must be answered 'Yes' or the request will be rejected by
the business rules as they cannot be left blank or answered 'No'.
• Benefit The 'Yes' radio button for two of the questions on the Certificate Request
Screen involving OBD and ORVR were modified to display 'Yes or N/A' to avoid
any confusion involving requesting a certificate for an electric vehicle.
Title: LD: 4B: CSI Report is not showing EGR type (CR #78357)
Description: The CSI Report is not showing the EGR type data submitted by the
manufacturer.
• Benefit: This fixed a bug in the CSI report in which the EGR type submitted by
the manufacturer was not being displayed.
Title: LD: 4B: BR TG-BR76 not checking if Air Aspiration Device Configuration is null or
blank (CR #78360)
Description: Business Rule TG-BR76 is rejecting submissions if the Air Aspiration
Device Configuration (TG-49) is null or blank and the Number of Air Aspiration Devices
(TG-48) is zero. This business rule should only be checking the Number of Air
Aspiration Devices if the Air Aspiration Device Configuration is not null AND not blank
AND not'N'.
Implemented fix to TestGroupRules.drl and modified appropriate unit test. Changes
passed unit testing.
• Benefit: This fixed a bug in the Test Group business rules. Previously
submissions were being rejected if the Air Aspiration Device Configuration (TG-
Verify Maintenance Release, R4.b.4 3-4 December 19,2008
-------
U.S. EPA CDX/Verify Verify Maintenance Release 4.6.4, Software Release Notes
49) was null or blank and the Number of Air Aspiration Devices (TG-48) was 0.
This problem has now been fixed.
Verify Maintenance Release, R4.b.4 3-5 December 19,2008
-------
Section 3.2 was intentionally deleted from this document.
-------
U.S. EPA CDX/Verify
Verify Maintenance Release 4.b.4, Software Release Notes
Section 4. Change Requests (CRs) Included in Verify Maintenance R4.b.4
CR#
Title
Description
Project/Industry
57444
LD: 4B: New Industry:
Portable Fuel Container
(CR #57444)
Add a new industry 'Portable Fuel
Container' to the manufacturer
information (and manufacturer
registration) modules. Also include
new industries for "ICI: Light-Duty"",
Alternative Fuel Converter (Light-
Duty/Heavy-Duty Chassis Certified),
and "Nonroad / Stationary Spark-
Ignited Evaporative Component.
Verify - Light
Duty
77051
LD: 4B: LOD Test Info
should look for
requested tests that are
active and inactive
When looking for the requested test to
match to a submitted LOD Test the
system should consider inactive tests
if there are no applicable active tests.
Verify - Light
Duty
77128
LD:4B: LD: 4B: BE:
Evap standards are
needed in Consolidated
List of Standards in
Test Group Screen
A business rule is needed to prohibit
entry of duplicate test result names for
the same test.
Verify - Light
Duty
77129
LD: 4B: Business
Rules: Test Group: TG-
BR92 fires incorrectly
when Test Group and
Tests have different
model years
The Decision Information Queue back-
end webpage should be sorted in
descending order (newest to oldest).
Verify - Light
Duty
77460
Add new document
type
Add the Document Type of "Alternative
Fuel Conversion Data Submission
Form (>3 years and >50,000 miles)" to
the Front-end and Back-end document
module. Also, add new Compliance
Document Type of "Model Year
2008&2009 CAFE Data File".
Verify - Light
Duty
77480
Document Module
Changes to Support
HDIU
Increase the allowed size of Original
Document Name to 100 characters.
Include the Original Document Name
in the subject and body of Inbox
messages.
Verify - Light
Duty
Verify Maintenance Release, R4.b.4
AB-7
December 19, 2008
-------
U.S. EPA CDX/Verify
Verify Maintenance Release 4.b.4, Software Release Notes
77483
Only send one inbox
message per
submission
Right now, HDIU users get an Inbox
message when they submit a file and
another when the backend receives it.
They should only get the second.
Verify - Light
Duty
77486
HDIU schema changes
for November '08
Mostly making fields optional or
changing the format, however,
renaming a few. Synchronizing the
data requirements document.
Verify - Light
Duty
77497
FE: VI Review page
The comments should be formatted so
the carriage returns are displayed
properly.
Verify - Light
Duty
77499
Front-end - Test Info
Help Button
I can click on the white space near the
top of the page and get the help page
to come up.
Verify - Light
Duty
77511
BR: Fuel Props
Corrections to Fuel
Props with Tests should
be rejected
If a correction is submitted to a Fuel
Properties dataset and that dataset is
already referenced by an active Test
Info dataset then it should be rejected.
Verify - Light
Duty
77549
LOD Data Transfer:
Write a note into the
comments field if there
is no MFT Test Info
In the cases where there is no
matching Mfr Test for a Test
Procedure selected by EPA then the
system should put a note into the Test
Comments field that says, "No MFR
results for this test procedure/fuel type
combination."
Verify - Light
Duty
77585
Fuel
When selecting "Gasoline", it only
returns seven records but should have
returned 11. When selecting "Battery-
Electric", no records were returned but
one should have been.
Verify - Light
Duty
77587
Request for additional
status
No records are returned when
selecting either "Yes" or "No" for
"Request For Additional Status".
Selecting "No" should return any
records that have not been changed to
"Yes" even if they are actually Null.
Verify - Light
Duty
77589
Error in searching by
configuration
j_ Received error message every time I
tried to search using configuration
number. The error simply says "There
has been a system error. Please
contact: Verify Help Desk (888) 890-
1995 verifyhelp(S)csc.com"
Verify - Light
Duty
Verify Maintenance Release, R4.b.4
AB-8
December 19, 2008
-------
U.S. EPA CDX/Verify
Verify Maintenance Release 4.b.4, Software Release Notes
77590
Error in searching by
running change number
Received error message every time I
tried to search using the running
change number. The error simply
says, "There has been a system error.
Please contact: Verify Help Desk (888)
890-1995 verifvhelp@csc.com"
Verify - Light
Duty
77594
ATD Precision Metals
type incorrect
In After Treatment Device section,
ATD Precious Metal Type is displaying
the value from "ATD Type".
Verify - Light
Duty
77683
LD:4b: FE: Add
additional fields to FE
Label Subconfiguration
On the "Base Level Information" tab, in
the "Subconfiguration Info" box,
a new table needs to be added above
the "Test Info" table that is called
"Subconfiguration Sales Information".
This table will include two of the data
elements that are already in the
Subconfiguration box
(Subconfiguration Projected Sales and
Test Group) plus three new data
elements (Mfr Code, Division Code,
Carline Code). This will involve
changing the xml schema and
database tables. There are also some
changes requested for some of the
field labels on the submission screen.
Verify - Light
Duty
77706
LD:4b: FE: SS: The
"Review and Submit"
button on shift schedule
Save2page links to
wrong screen
The 'Review and Submit' button on the
Shift Schedule Save2 page links to
Decision Info instead of Shift
Schedule.
Verify - Light
Duty
77733
LD:4b: Changes to CSI
Report
Make the following changes to the CSI
Report:
1) In the standards sections, attempt
to line up the values under the
headings better. Currently, it appears
as though the headings are left
justified and the values are centered.
2) In both the Models section and the
standards section, the Cert Region
Code should be displayed as either
"CA" or "Fed". Currently, this is using
the database code (CA or FA), so a
system will have to be devised for
transforming the code into an
"abbreviated description" (as opposed
Verify - Light
Duty
Verify Maintenance Release, R4.b.4
AB-9
December 19, 2008
-------
U.S. EPA CDX/Verify
Verify Maintenance Release 4.b.4, Software Release Notes
to the regular description).
3) Standards information should never
be displayed on a page without the
associated Test displayed as a (2nd)
header at the top of the page
(underneath the report header). If this
causes a group of standards to have
to be broken into displaying on
multiple pages that is fine as long as
the test is displayed on each of those
pages.
77779
LD:4B: BE: CTDI: "View
Related Tests" button
does not always display
the tests for the correct
vehicle
The "View Related Tests" button on
Confirmatory Test Decision Info does
not always display the tests for the
correct vehicle.
Verify - Light
Duty
77787
LD:4b:FE: Shift
schedule bread crumbs
incorrect on success
page
The breadcrumbs on the Shift
Schedule success page are for
decision info instead of Shift Schedule.
Verify - Light
Duty
77797
LD: 4B: FE:
Supplemental Info -
Need better error
message for Emission
Standard Value
The Error message should state what
the format for Emission Standard
Value is.
Verify - Light
Duty
77798
LD: 4B: FE: Shift
Schedule - "Return to
Confirmatory Test
Home Page" button on
success page does not
work.
The issue is that the "Return to
Confirmatory Test Home Page" button
on the success screen after
submission does not work. Get the
following error message: Invalid path
/lightduty/conftest/home was
requested.
Verify - Light
Duty
77800
LD:4B: FE: CTDI -
Change label name to
Vehicle Model Name
(Carline)
Add '(Carline)' to the Vehicle Model
Name label on the Decision Info
screen.
Verify - Light
Duty
77801
LD: 4B: FE: Test
Group: Problem with
Engine Configuration
Number
On the Test Group Dataset
Submission, Engine Configuration tab,
there is no box to enter engine
configuration number, and when I click
on Review and Submit, an error is
received: Engine Configuration
Number is a required field.
Verify - Light
Duty
Verify Maintenance Release, R4.b.4
AB-10
December 19, 2008
-------
U.S. EPA CDX/Verify
Verify Maintenance Release 4.b.4, Software Release Notes
Steps to replicate this error:
Enter Test Group New Dataset
Click on Engine configuration, you see
1 as default value
Click on Save Form. Click on Save.
Click Cancel
Now click Review and Submit. The
default value for Engine configuration
vanishes.
77816
LD: 4B: BE: RFC
Queue - the CERT
details column should
link directly to the tab of
the CSI
Request For Certificate Queue - the
Cert Details column should link directly
to that tab of the CSI
Verify - Light
Duty
77819
LD: 4B: BE: Add links to
home page
Make links to the following areas on
the home page:
1. All the Mfr links from the industry
specific pages.
2. Certificate Signing Queue
3. Certificate Log
Verify - Light
Duty
77821
LD: 4B: BE: Certificate
Search - List of Signer
Names in pull-down
No certificates were returned when
selecting any of the names in the
Signer Name pull-down however when
selecting "AH", several certificate
records are returned. Only Signer
Names that actually have certificates
in the database should be included in
the pull-down. Names of people that
have left EPA or CISD should not be in
the pull-down list unless there are
certificates that they signed, (i.e.- Dan
Harrison, Gay MacGregor, Jim
Blubaugh, Lori Stewart, Merrylin Zaw-
Mon should not be in the list unless
there are LD certificates that will show
up in search results when their names
are selected.)
Verify - Light
Duty
77859
LD: 4B: BR: Cert
Request - Business
rules require answers to
questions that do not
apply to electric
vehicles
Some of the questions on the
Certificate Request Screen do not
apply to electric vehicles, but they still
must be answered 'Yes' or the request
will be rejected by the business rules
as they cannot be left blank or
Verify - Light
Duty
Verify Maintenance Release, R4.b.4
AB-11
December 19, 2008
-------
U.S. EPA CDX/Verify
Verify Maintenance Release 4.b.4, Software Release Notes
ID: 4B: CSI Report is
not showing EGR type
answered 'No'.
78357
The CSI Report is not showing the
EGR type data submitted by the
manufacturer.
Verify - Light
Duty
78360
LD:4B: BRTG-BR76
not checking if Air
Aspiration Device
Configuration is null or
blank
Business Rule TG-BR76 is rejecting
submissions if the Air Aspiration
Device Configuration (TG-49) is null or
blank and the Number of Air Aspiration
Devices (TG-48) is zero. This
business rule should only be checking
the Number of Air Aspiration Devices if
the Air Aspiration Device Configuration
is not null AND not blank AND not 'N'.
Implemented fix to TestGroupRules.drl
and modified appropriate unit test.
Changes passed unit testing.
Verify - Light
Duty
Verify Maintenance Release, R4.b.4
AB-12
December 19, 2008
-------
U.S. EPA CDX/Verify Verify Maintenance Release 4.6.4, Software Release Notes
Abbreviations and Acronyms
CDX Central Data Exchange
CERT Certification Test
CFT Confirmatory Test
CIV Civil (Group)
CR Change Request
CSC Computer Sciences Corporation
DBDD Database Design Document
EPA Environmental Protection Agency
FE Fuel Economy
IUVP In-Use Verification Program
LOD Laboratory Operations Division
QA Quality Assurance
SDD System Design Document
SRN Software Release Notes
SRS System Requirements Specification
OTAQ Office of Transportation and Air Quality
Verify Maintenance Release, R4.b.4 AB-13 December 19,2008
------- |