SERA
f^ -
ty?4~
MOL
if:
: .
.
Indoor Air Quality (IAQ)
-------
This Guide provides
information and guidance
for homeowners and
renters on how to clean
up residential mold
problems and how to
prevent mold growth.
U.S. Environmental Protection Agency
Office of Air and Radiation
Indoor Environments Division
1200 Pennsylvania Avenue, N. W.
Mailcode: 66og/
Washington, DC 20460
www.epa.gov/iaq
-------
A BRIEF GUIDE TO MOLD,
MOISTURE, AND YOUR HOME
Contents
Mold Basics
Why is mold growing in my home?
Can mold cause health problems?
How do I get rid of mold?
Mold Cleanup
Who should do the cleanup?
Mold Cleanup Guidelines
What to Wear When Cleaning Moldy Areas
How Do I Know When the Remediation
or Cleanup is Finished?
Moisture and Mold Prevention and Control Tips
Actions that will help to reduce humidity
Actions that will help prevent condensation
Testing or sampling for mold
Hidden Mold
Cleanup and Biocides
Additional Resources
Page
2
2
3
4
6
8
9
10
n
12
13
M
15
16
-------
MOLD
BASICS
The key to mold control is moisture control.
If mold is a problem in your home, you should clean up
the mold promptly and fix the water problem.
It is important to dry water-damaged areas and items
within 24-48 hours to prevent mold growth.
y is mold growing in my home? Molds are part of the
natural environment. Outdoors, molds play a
part in nature by breaking down dead organic
matter such as fallen leaves and dead trees, but
indoors, mold growth should be avoided. Molds
reproduce by means of tiny spores; the spores
are invisible to the naked eye and float through
outdoor and indoor air. Mold may begin growing
indoors when mold spores land on surfaces that
are wet. There are many types of mold, and none
of them will grow without water or moisture.
Mold growing outdoors on
frewood. Molds come in many
colors; both white and black
molds are shown here.
Can mold cause health problems? Molds are usually not
a problem indoors, unless mold spores land on a wet or
damp spot and begin growing. Molds have the potential
to cause health problems. Molds produce allergens
(substances that can cause allergic reactions), irritants, and
in some cases, potentially toxic substances (mycotoxins).
Inhaling or touching mold or mold spores may cause
allergic reactions in sensitive individuals. Allergic responses
include hay fever-type symptoms, such as sneezing, runny
nose, red eyes, and skin rash (dermatitis). Allergic reactions
to mold are common. They can be immediate or delayed.
Molds can also cause asthma attacks in people with asthma
who are allergic to mold. In addition, mold exposure can
irritate the eyes, skin, nose, throat, and lungs of both mold-
-------
allergic and non-allergic people. Symptoms other
than the allergic and irritant types are not commonly
reported as a result of inhaling mold.
Research on mold and health effects is ongoing. This
brochure provides a brief overview; it does not describe
all potential health effects related to mold exposure.
For more detailed information consult a health
professional. You may also wish to consult your state or
local health department.
How do I get rid of mold? It is impossible to get rid of all
mold and mold spores indoors; some mold spores
will be found floating through the air and in house
dust. The mold spores will not grow if moisture is
not present. Indoor mold growth can and should
be prevented or controlled by controlling moisture
indoors. If there is mold growth in your home, you
must clean up the mold and fix the water problem. If
you clean up the mold, but don't fix the water problem,
then, most likely, the mold problem will come back.
Molds can gradually
destroy the things
they grow on. You
can prevent damage
to your home
and furnishings,
save money, and
avoid potential
health problems by
controlling moisture
and eliminating mold
growth.
Magnified mold spores.
-------
If you already have a
mold problem -
ACT QUICKLY.
Mold damages what it
grows on. The longer
it grows, the more
damage it can cause.
Leaky window - mold is beginning to
rot the wooden frame and windowsill.
Who should do the cleanup? Who should do the cleanup
depends on a number of factors. One consideration is
the size of the mold problem. If the moldy area is less
than about 10 square feet (less than roughly a 3 ft. by 3
ft. patch), in most cases, you can handle the job yourself,
following the guidelines below. However:
• If there has been a lot of water damage, and/or mold
growth covers more than 10 square feet, consult the
U.S. Environmental Protection Agency (EPA) guide:
Mold Remediation in Schools and Commercial Buildings.
Although focused on schools and commercial
-------
buildings, this document is applicable to other
building types. It is available on the Internet at: www.
epa.gov/mold.
I If you choose to hire a contractor (or other professional
service provider) to do the cleanup, make sure the
contractor has experience cleaning up mold. Check
references and ask the contractor to follow the
recommendations in EPA's Mold Remediation in
Schools and Commercial Buildings, the guidelines of
the American Conference of Governmental Industrial
Hygenists (ACGIH), or other guidelines from
professional or government organizations.
I If you suspect that the heating/ventilation/air
conditioning (HVAC) system may be contaminated
with mold (it is part of an identified moisture problem,
for instance, or there is mold near the intake to the
system), consult EPA's guide Should You Have the Air
Ducts in Your Home Cleaned? before taking further
action. Do not run the HVAC system if you know or
suspect that it is contaminated with mold - it could
spread mold throughout the building. Visit www.epa.
gov/iaq/pubs to download a copy of the EPA guide.
I If the water and/or mold damage was caused by sewage
or other contaminated water, then call in
a professional who has experience cleaning and fixing
buildings damaged by contaminated water.
I If you have health concerns, consult a health
professional before starting cleanup.
-------
MOLD
CLEANUP
GUIDELINES
always damp can be hard to maintain completely
free of mold. If there's some mold in the shower or
elsewhere in the bathroom that seems to reappear,
increasing the ventilation (running a fan or opening
a window) and cleaning more frequently will usually
prevent mold from recurring, or at least keep the
mold to a minimum.
Tips and techniques The tips and techniques presented in
this section will help you clean up your mold problem.
Professional cleaners or remediators may use
methods not covered in this publication. Please note
that mold may cause staining and cosmetic damage.
It may not be possible to clean an item so that its
original appearance is restored.
• Fix plumbing leaks and other water problems as
soon as possible. Dry all items completely.
• Scrub mold off hard surfaces with detergent and water,
and dry completely.
Mold
growing
on the
underside
of a plastic
lawn chair
in an area
where
rainwater
drips through
and deposits
organic
material.
-------
Mold growing
on a piece of
ceiling tile.
Absorbent or porous materials, such as ceiling tiles
and carpet, may have to be thrown away if they
become moldy. Mold can grow on or fill in the empty
spaces and crevices of porous materials, so the mold
may be difficult or impossible to remove completely.
Avoid exposing yourself or others to mold (see
discussions: What to Wear When Cleaning Moldy
Areas and Hidden Mold.)
Do not paint or caulk moldy surfaces. Clean up the
mold and dry the surfaces before painting. Paint
applied over moldy surfaces is likely to peel.
If you are unsure about how to clean an item, or
if the item is expensive or of sentimental value,
you may wish to consult a specialist. Specialists in
furniture repair, restoration, painting, art restoration
and conservation, carpet and rug cleaning, water
damage, and fire or water restoration are commonly
listed in phone books. Be sure to ask for and check
references. Look for specialists who are affiliated with
professional organizations.
-------
Mold growing on a suitcase stored in a
humid basement.
It is important
to take
precautions to
LIMIT
YOUR
EXPOSURE
to mold and
mold spores.
I Avoid breathing in mold or mold spores. In order
to limit your exposure to airborne mold, you may
want to wear an N-95 respirator, available at many
hardware stores and from companies that advertise on
the Internet. (They cost about $12 to $25.) Some N-95
respirators resemble a paper dust mask with
a nozzle on the front, others are made primarily
of plastic or rubber and have removable cartridges that
trap most of the mold spores from entering.
In order to be effective, the respirator or mask
must fit properly, so carefully follow the instructions
supplied with the respirator. Please note that the
Occupational Safety and Health Administration (OSHA)
requires that respirators fit properly (fit testing) when
used in an occupational setting; consult OSHA for
more information (8oo-32i-OSHAorosha.gov/).
-------
I Wear gloves. Long gloves that extend to the middle of
the forearm are recommended. When working with water
and a mild detergent, ordinary household rubber gloves
may be used. If you are using a disinfectant, a biocide
such as chlorine bleach, or a strong cleaning solution, you
should select gloves made from natural rubber, neoprene,
nitrile, polyurethane, or PVC (see Cleanup
and Biocides). Avoid
touching mold or moldy
items with your bare
hands.
I Wear goggles. Goggles that
do not have ventilation
holes are recommended.
Avoid getting mold or
mold scores in vour eves Cleaning while wearing N-95
moia spores i n you r eyes. respirator> giwes> and gogg/es.
How do I know when the remediation or cleanup
is finished? You must have completely fixed the water
or moisture problem before the cleanup or remediation
can be considered finished.
• You should have completed mold removal. Visible mold
and moldy odors should not be present. Please note that
mold may cause staining and cosmetic damage.
• You should have revisited the site(s) shortly after
cleanup and it should show no signs of water damage
or mold growth.
• People should have been able to occupy or re-occupy the
area without health complaints or physical symptoms.
Ultimately, this is a judgment call; there is no easy
answer.
-------
^> J
J -->
J
MOISTURE AND MOLD
EVENTION\M>
TROL TIPS
-J
J"1. J-
Control is the Key to
Mold Control
Mold growing
on the surface
of a unit
ventilator.
When water leaks or spills occur
indoors-ACT QUICKLY.
If wet or damp materials or areas
are dried 24-48 hours after a leak
or spill happens, in most cases
mold will not grow.
Clean and repair roof gutters regularly.
Make sure the ground slopes away from the building
foundation, so that water does not enter or collect
around the foundation.
Keep air conditioning drip pans clean and the drain
lines unobstructed and flowing properly.
10
-------
• Keep indoor humidity low. If
possible, keep indoor
humidity below 60 percent
(ideally between 30 and 50
percent) relative humidity.
Relative humidity can be
measured with a moisture
or humidity meter, a small,
. . ...,„., inexpensive ($io-$5O)
Condensation on the inside of a window- " " '
instrument available at many
hardware stores.
• If you see condensation or moisture collecting on
windows, walls or pipes -ACT QUICKLY to dry the
wet surface and reduce the moisture/water source.
Condensation can be a sign of high humidity.
Actions that will help to reduce humidity:
4 Vent appliances that produce moisture, such as
clothes dryers, stoves, and kerosene heaters to the
outside where possible. (Combustion appliances
such as stoves and kerosene heaters produce water
vapor and will increase the humidity unless vented
to the outside.)
4 Use air conditioners and/or de-humidifiers
when needed.
4 Run the bathroom fan or open the window when
showering. Use exhaust fans or open windows
whenever cooking, running the dishwasher or
dishwashing, etc.
n
-------
Actions that will help prevent condensation:
4 Reduce the humidity (see preceeding page).
4 Increase ventilation or air movement by opening doors
and/or windows, when practical. Use fans as needed.
4 Cover cold surfaces, such as cold water pipes, with in-
sulation.
4 Increase air temperature.
Mold
growing
on a
wooden
headboard
in a room
with high
humidity.
12
-------
Renters: Report all plumbing leaks and moisture problems
immediately to your building owner, manager, or
superintendent. In cases where persistent water
>cal, state, or federal health or
housing authorities.
Vl
Testing or sampling for
mold Is sampling for mold
needed? In most cases, if visible
mold growth is present, sampling
is unnecessary. Since no EPA or
other federal limits have been
set for mold or mold spores,
sampling cannot be used to
check a building's compliance
with federal mold standards.
Surface sampling may be useful
to determine if an area has been
adequately cleaned or remediated. Sampling for mold
should be conducted by professionals who have specific
experience in designing mold sampling protocols,
sampling methods, and interpreting results. Sample
analysis should follow analytical methods recommended
by the American Industrial Hygiene Association (AIHA),
the American Conference of Governmental Industrial
Hygienists (ACGIH), or other professional organizations.
Rust is an indicator that condensation
occurs on this drainpipe. The pipe should
be insulated to prevent condensation.
-------
! DDEN
MOLD
Mold growing
on the
back side of
wallpaper.
Suspicion of hidden mold You may suspect hidden mold if a
building smells moldy, but you cannot see the source,
or if you know there has been water damage and
residents are reporting health problems. Mold may
be hidden in places such as the back side of dry wall,
wallpaper, or paneling, the top side of ceiling tiles, the
underside of carpets and pads, etc. Other possible
locations of hidden mold include areas inside walls
around pipes (with leaking or condensing pipes), the
surface of walls behind furniture (where condensation
forms), inside ductwork, and in roof materials above
ceiling tiles (due to roof leaks or insufficient insulation).
Investigating hidden mold problems Investigating hidden
mold problems may be difficult and will require caution
when the investigation involves disturbing potential
sites of mold growth. For example, removal of wallpaper
can lead to a massive release of spores if there is mold
growing on the underside of the paper. If you believe that
you may have a hidden mold problem, consider hiring an
experienced professional.
-------
Cleanup and Biocides Biocides are substances that can destroy
living organisms. The use of a chemical or biocide
that kills organisms such as mold (chlorine bleach, for
example) is not recommended as a routine practice during
mold cleanup. There may be instances, however, when
professional judgment may indicate its use (for example,
when immune-compromised individuals are present).
In most cases, it is not possible or desirable to sterilize
an area; a background level of mold spores will remain
- these spores will not grow if the moisture problem
has been resolved. If you choose to use disinfectants or
biocides, always ventilate the area and exhaust the air to
the outdoors. Never mix chlorine bleach solution with other
cleaning solutions or detergents that contain ammonia
because toxic fumes could be produced.
Please note: Dead mold may still cause allergic reactions in some
people, so it is not enough to simply kill the mold, it must
also be removed.
Water stain
on a basement
wall — locate
and fix the
source of the
water promptly.
-------
ADDITIONAL
RESOURCES
For more information on mold related issues including
mold cleanup and moisture control/condensation/
humidity issues, visit:
www.epa.gov/mold
• -
Mold growing on fallen leaves.
This document is available on the Environmental Protection Agency, Indoor
Environments Division website at: www.epa.gov/mold
16
-------
NOTES
Acknowledgements
EPA would like to thank Paul Ellringer, PE, CIH, for providing the photo on page 14.
Please note that this document presents recommendations. EPA does not regulate
mold or mold spores in indoor air.
-------
Indoor Air Quality (IAQ)
------- |