Guidance for RFS2010 Annual
Compliance Reporting
&EPA
United States
Environmental Protection
Agency
-------
Guidance for RFS2010 Annual
Compliance Reporting
Compliance and Innovative Strategies Division
Office of Transportation and Air Quality
U.S. Environmental Protection Agency
&EPA
United States
Environmental Protection
Agency
EPA-420-B-11-005a
February 2011
-------
Guidance for RFS 2010 Annual Compliance Reporting
This guidance document is intended to assist obligated parties and renewable fuel exporters in
reporting their RFS2 Renewable Volume Obligations (RVOs) reporting for the 2010 compliance
year. The reports for 2010 are due February 28, 2011. In addition to this guidance document,
EPA has posted RVO Q&As that can be found on the RFS web site at:
http://www.epa.gov/otaq/fuels/renewablefuels/compliancehelp/rfs2-aq.htmtf7.
Any obligated party, as described in §80.1406, that produced or imported gasoline or MVNRLM
diesel fuel for use in the contiguous 48 states plus Hawaii (Alaska if they opt-in) during a given
compliance period must submit an RFS2 Annual Compliance Report pursuant to §80.1451(a).
Any exporter of renewable fuels, as described in §80.1430, that exported a volume of renewable
fuel from the contiguous 48 states plus Hawaii (Alaska if they opt-in) during a given compliance
period must submit an RFS2 Annual Compliance Report pursuant to §80.1451(a).
Parties that have more than one business activity that generate multiple Renewable Volume
Obligations (RVOs), must report the information separately (i.e. imports, exports, and refining
obligations must be met separately). Further, prior to retiring RFS2 RINs for compliance
gasoline and diesel refiners are required to indicate the compliance level that they choose to
report based on (aggregate or refinery by refinery) in the OTAQReg: Fuels Programs
Registration interface on Central Data Exchange (CDX).
This guidance document does not discuss all of the specific Biomass-Based Diesel RVO
requirements and flexibilities. However, obligated parties should note that the 2010 Biomass-
Based Diesel standard consists of the combined 2009 and 2010 volume requirements.
Additionally, obligated parties should pay close attention to the specific requirements and
flexibilities for 2010 Biomass-based diesel compliance in regulations (40 CFR 80.1427(a)(7))
and to the instructions in the RFS0301 report.
The guidance document will briefly discuss new features that have been implemented in EMTS
to assist obligated parties and renewable fuel exporters with their RFS2 annual compliance
requirements. These features will aid users in completing their RFS0301 Annual Compliance
Report, which is required pursuant to §80.1451(a). For more information on all EMTS features,
please visit the EMTS documents webpage at:
http://www.epa.gov/otaq/fuels/renewablefuels/emtshtml/emtsdocuments.htm
Regulated parties may use this document to aid in achieving compliance with the RFS2 program
regulations. However, this document does not in any way alter the requirements of those
regulations. This document does not establish or change legal rights or obligations. It does not
establish binding rules or requirements and is not fully determinative of the issues addressed.
Agency decisions in any particular case will be made applying the law and regulations on the
basis of specific facts and actual action.
-------
Table of Contents
1.0 General Information for Obligated Parties 3
1.1 What information do I have to submit for 2010 Annual Compliance? 3
1.2 What RINs can be used to satisfy each Renewable Volume Obligation? 3
1.3 What is the last day that I can obtain RINs for compliance? 5
1.4 EMTS Features 6
2.0 Obligated Parties: Gasoline or Diesel Refiners 7
2.1 Refiners: Selecting Compliance Level in CDX 7
2.2 Refiners: RFS0301 Guidance 8
2.3 Refiners: Deficit Carryovers 9
3.0 Obligated Parties: Gasoline or Diesel Importers 10
3.1 Importers: RFS0301 Guidance 10
3.2 Importers: Deficit Carryovers 11
4.0 Renewable Fuel Exporters 12
4.1 Exporters: RFS0301 Guidance 12
4.2 Exporters: Deficit Carryovers 13
5.0 Purchasing Cellulosic Biofuel Waiver Credits 14
5.1 Pay.gov Electronic Payments 14
5.1.1 Adding Pay.gov Application to an Existing CDX Account 14
5.1.2 Accessing the Cellulosic Biofuel Waiver Credit Program Application 18
5.2 Electronic Payments via Fedwire 24
5.3 Mail Payment 24
-------
1.0 General Information for Obligated Parties
All obligated parties are required to submit the RFS0301: RFS2 2010 Annual Compliance
Report. The RFS0301 report is used to demonstrate compliance with the Renewable Volume
Obligations that obligated parties and exporters acquired based on their compliance year
activities.
The following information is general information for all obligated parties. There is specific
information based on the business activities of the obligated party in sections 2 through 4.
1.1 What information do I have to submit for 2010 Annual Compliance?
Obligated parties and renewable fuel exporters are required to submit all information listed in
§80.1451(a). All of the required RFS2 RIN information and the majority of the required RFS1
RIN information will be entered and submitted in the RFS0301 report.
Pursuant to 80.1451(a)(xi) parties are required to submit a list of all RFS1 RINs retired for
compliance. The RFS2 REST information submitted on the RFS0301 report satisfies all of the
requirements in 80.1451(a). However, all individual RFS1 RIN numbers retired for compliance
will be retired via the RFS0201: RFS1 RIN Transaction Report and the aggregate amount of
RINs retired will be reported on the RFS0301.
If RFS1 RINs have been retired for compliance during the first quarter 2011 (before
February 28), a partial RFS0201 report must be filed with only the RFS1 RINs being
retired for compliance.
If all RFS1 RINs have been retired for compliance during the fourth quarter, then a
partial RFS0201 report will not have to be filled out.
1.2 What RINs can be used to satisfy each Renewable Volume Obligation?
In 2010, both RFS1 RINs and RFS2 RINs (transacted in EMTS) may be used for compliance
purposes. For 2011 compliance, unused 2010 RFS1 RINs may be eligible to be used for
compliance purposes in addition to unused 2010 and 2011 RFS2 RINs.
Different Types of RINs:
Under RFS2, certain types of RINs can be used to fulfill various obligations. Pursuant to 40
CFR 80.1427(a)(2)-(4), the following types of RINs may be used to satisfy the specific RVOs:
RINs Generated Under RFS1
A RIN generated pursuant to §80.1126 with a D code of 2 and an RR code of 15, 16, or
17 is deemed equivalent to a RIN with a D code of 4 generated pursuant to §80.1426.
A RIN generated pursuant to §80.1126 with a D code of 1 and RR code of 25 is deemed
equivalent to a RIN with a D code of 3 generated pursuant to §80.1426.
All other RINs generated pursuant to §80.1126 are deemed equivalent to RINs with a D
code of 6 generated pursuant to §80.1426.
-------
Note: RFS1 RINs will still be identified as they were in RFS1 regardless of the D code
equivalent specified in the regulations (i.e. RFS1 RINs cannot be changed to RFS2 D codes or
RR codes)
RINs Generated Under RFS2
RINs with a D code of 3 or 7 are valid for compliance with the cellulosic biofuel RVO.
RINs with a D code of 4 or 7 are valid for compliance with the biomass-based diesel
RVO.
RINs with a D code of 3, 4, 5, or 7 are valid for compliance with the advanced biofuel
RVO.
RINs with a D code of 3, 4, 5, 6, or 7 are valid for compliance with the renewable fuel
RVO.
Renewable Volume Obligation Nesting:
RVOs are "nested," meaning that certain types of RINs can be used to satisfy multiple RVOs.
For example, a RIN with a D code of 4 may be used toward satisfying a biomass-based diesel
RVO, an advanced biofuel RVO and renewable fuel RVO for the same compliance year.
However, a RIN with a D code of 5 or 6 may not be used to meet a biomass-based diesel RVO.
Table 1 - Which RIN D codes can satisfy each Renewable Volume Obligation (RVO)
pursuant to 40 CFR 80.1427(a)(2)-(4)?
DCode
3
4
5
6
7
Cellulosic
Biofuel RVO
X
X*
Biomass-Based
Diesel RVO
X
X*
Advanced
Biofuel RVO
X
X
X
X
Renewable Fuel
RVO
X
X
X
X
X
Note: X* indicates a RIN with a D code of 7 may be used to meet either the Cellulosic Biofuel
RVO or the Biomass-Based Diesel RVO, but not both RVOs pursuant to 40 CFR 80.1427(3)(ii).
Additional Notes:
1) When filling out the RFS0301 report, parties must carry the entire number of RINs used
for compliance purposes throughout the nested standards regardless of it showing too
many RINs in the other RVO categories.
For example:
An obligated party uses 400 D3 RFS2 RINs for compliance, then 400 must appear
in field 24 for the rows with "CB", "AF", and "RF" in field 9.
An obligated party uses 110,000 D4 RFS2 RINs for compliance, then 110,000
must appear in field 25 for the rows with "BD", "AF", and "RF" in field 9.
-------
2) RINs can only be used in one compliance year
For example:
An obligated party cannot use a D5 RIN to fulfill the advanced biofuel RVO 2010
and then use the same RIN to fulfill the renewable fuel RVO in 2011.
1.3 What is the last day that I can obtain RINs for compliance?
Both RFS1 and RFS2 RINs used to meet the 2010 obligation may be traded until February 28,
2011 following the end of the compliance year. For the 2010 compliance year, the RFS0301:
2010 Annual Compliance Report must be submitted. The RFS0300: Annual Compliance Report
was for compliance years 2007 through 2009.
Additional RFS2 EMTS RIN Notes:
1. In order to retire RFS2 RINs for compliance by the deadline, all transactions must be
completed and processed in EMTS. Although EMTS can accept and process certain
transactions rather quickly, RIN retirements may take longer to process when multiple
RIN batches are involved. Therefore, parties should try to complete their RIN
retirements by February 21, 2011. If EMTS is unable to process the transactions by
February 28, then those RINs will be unavailable for retirement in that compliance year.
2. As discussed above, RIN retirements may take longer to process when multiple RIN
batches are involved. Due to a longer processing time, a session in the EMTS User
Interface may timeout prior to the processing completion. Therefore, EPA suggests that
parties who intend to retire a large quantity of RINs for compliance use an XML file.
XML files should be submitted at least one week prior to the compliance deadline (e.g.
February 21). Obligated parties using the web user interface should retire no more than
one million RINs at a time to avoid system delays.
-------
1.4 EMTS Features
Compliance Data User Interface in EMTS
Home | Contact Us I Help | Logo:
Logged in as: LucyPelt for RAP Inc. GEN Biodiesel (4671)
View Aggregate RINs Retired for Obligation
* Transaction Bin
The following grid displays the number of RINs your organization has retired for obligation.
Your organisation has 0
un-submitted
transactions in the
transaction bin.
View Transaction Bin
Organizations
Quick Search
| Fuel (D-Code) ^
Advanced Biofuel (D=5)
Biomass-Based Diesel (D=4)
Renewable Fuel (D-6)
2010
2010
2010
^| Compliance Year
2010
2010
2010
^ Compliance Level
Aggregated Importer
Aggregated Importer
Refinery by Refinery
t Facility ID
Valley Medico Plant 12 (46711)
Q^^^^^Q
34000
71500
39000
Export options: CSV 1 Excel 1 PDF
The Compliance Data user interface page in EMTS is a listing of all RINs retired for compliance,
broken out by:
RIN Type (D code)
RIN Year
Compliance Level (AGREF, AGIMP, EXPRT, or refinery-by-refinery)
RIN Quantity
Obligated parties should use this page to accurately reflect the correct RIN quantities that have
been retired for compliance on the Annual Compliance Report. This page will assist parties to
complete fields 24 through 28 of the RFS0301: 2010 Annual Compliance Report.
This interface can be found under the Reports Tab on the horizontal toolbar in EMTS.
-------
2.0 Obligated Parties: Gasoline or Diesel Refiners
Refiners of gasoline or diesel may comply in the aggregate or on a refinery-by-refinery basis.
Prior to the retirement of RFS2 RINs in EMTS, refiners must update their registration via the
OTAQReg: Fuels Programs Registration application to indicate how they plan to comply.
2.1 Refiners: Selecting Compliance Level in CDX
Pursuant to 80.1406(c)(l), an obligated party may comply with its annual compliance
requirements for all of its refineries in aggregate, or for each refinery individually. However, if
the obligated party carries a deficit from one year to the next, then the party must maintain the
same approach to aggregation in the next calendar year.
In order to select the compliance level, a CDX user will login to CDX and:
1. Select the OTAQReg: Fuels Programs Registration link.
2. On the OTAQ Registration Program Home page, under the Company Information
header, the user will select the Edit - [Company Name] link.
3. On the Edit Company Information page, under the Company Details tab, the user will
scroll down to the bottom of the page and select the compliance level.
Refiner Compliance Level *
Pursuant to 80.1406(c)(1). an obligated party may comply with its annual compliance requirements for all of its refineries in the aggregate, or for each refinery individually. However, if
the obligated party carries a deficit from one year to the next, then the party must maintain the same approach to aggregation in the next calendar year. Please indicate the compliance
level below:
"" Agg reg at i o n of Refi n e ri e s
O
"" Refinery-by-refinery
" N/A (Biodiesel Producers Only)
4. Once the compliance level has been selected, if no other updates need to be made in the
registration, click Review and Submit.
5. Review the information. The user will be unable to edit any information on this page. If
the information looks correct, click Next.
6. The user must print out the PDF forms that are generated on the Company Information
Change page. Once the forms are printed, click Submit.
Note: The PDF registration must be printed and signed by the responsible corporate
officer (RCO) that EPA currently has on file for the company. These forms must be sent
to EPA by either:
US Mail: Commercial Delivery:
U.S. Environmental Protection Agency U.S. Environmental Protection Agency
Fuels Programs Registration (6406J) Fuels Programs Registration
1200 Pennsylvania Avenue, NW Room 647C, 202-343-9038
Washington, DC 20460 1310 L Street, NW
-------
Washington, DC 20005
7. On the final page, click the Continue button to return to the main menu. EPA can only
process one request per company at a time. If you make edits before EPA has processed
your paperwork. Your edits will be lost and you will need to restart the process.
2.2 Refiners: RFS0301 Guidance (also available in the RFS0301 report instructions)
The RFS0301 reporting instructions can be found on the Renewable Fuel Standards Reporting
Forms web page at http://www.epa.gov/otaq/regs/fuels/rfsforms.htm.
In [Field No. 8] of the RFS0301 report, the refiner must enter either AGREF (aggregate) or the 5
digit facility ID (refinery-by-refinery). Regardless, the refiner will have at least four rows, one
for each RVO (renewable fuel, advanced biofuel, biomass-based diesel and cellulosic biofuel.)
Note: If complying refinery-by-refinery, the obligated party should have one row for each RVO
at each refinery (e.g. 2 refineries will have 8 rows, 3 refineries will have 12 rows, etc.).
Fields that must contain "NA" in the RFS0301: RFS2 2010 Annual Compliance Report
For a row with field 9 as CB, "NA" must be entered in field
14,15,16,17,18,19,20,21,25,26,27
For a row with field 9 as BD, "NA" must be entered in field
14,20,21,22,23,24,26,27,29,30,31
For a row with field 9 as AB, "NA" must be entered in field 14,15,16,20,21,27,29,30,31
For a row with field 9 as RF, "NA" must be entered in field 15,16,29,30,31
Prior-year RIN limits
For a row with field 9 as CB, the amount of prior year RINs that may be used for
compliance must satisfy the following formula:
[No. 22] < 0.20 x [No. 13]
For a row with field 9 as BD, the amount of prior year RINs that may be used for
compliance must satisfy the following formulas:
[No. 17] < 0.087 x ([No. 13] - [No.15] - [No. 16])
[No. 17] + [No. 18] < 0.20 x ([No. 13] - [No.15] - [No. 16])
For a row with field 9 as AB, the amount of prior year RINs that may be used for
compliance must satisfy the following formulas:
[No. 17] < 0.087 x [No. 13]
[No. 17] + [No. 18] + [No. 22] < 0.20 x [No. 13]
For a row with field 9 as RF, the amount of prior year RINs that may be used for
compliance must satisfy the following formulas:
[No. 17] < 0.087 x ([No. 13] + [No. 14])
[No. 17] + [No. 18] + [No. 20] + [No. 22] < 0.20 x ([No. 13] + [No. 14])
Note: In 2010 only, field No. 14 only applies to the Renewable Fuel RVO. In 2011 and
later, field No. 14 will apply to all RVOs.
-------
Deficit Carryover limits Per §80.1427(b)(l)(iii), an obligated party may not carry more
than 57% of their biomass-based diesel RVO from 2010 to 2011. Therefore, for a row
with field 9 as BD, the following formula must be satisfied:
[No. 32] < 0.57 x [No. 13]
Note: This limit does not apply to renewable fuel exporters
2.3 Refiners: Deficit Carryovers
An obligated party who fails to meet its obligation in a given year may carryover a deficit into
the following year pursuant to 40 CFR 80.1427(b) given that they meet the following
requirements:
A deficit has not been carried over from the previous year for that specific RVO;
The party meets all RVOs of the deficit category in the following year; and
For biomass-based diesel RVO in 2011, the deficit from 2010 is no larger than 57% of
the party's 2010 biomass-based diesel RVO.
A deficit is calculated according to the following formula:
D;= RVO;- [(ERINNUM)i+ (ERINNUM)i-l]
Where:
D;= The deficit, in gallons, generated in calendar year i that must be carried over to year
i+1 if allowed pursuant to paragraph (b)(l) of this section.
RVO;= The Renewable Volume Obligation for the obligated party or renewable fuel
exporter for calendar year i, in gallons.
(ERINNUM)i= Sum of all acquired gallon-RINs that were generated in year i and are
being applied towards the RVO;, in gallons.
(ERINNUM)i-l= Sum of all acquired gallon-RINs that were generated in year i-1 and are
being applied towards the RVO;, in gallons.
-------
3.0 Obligated Parties: Gasoline or Diesel Importers
Importers of gasoline or diesel must comply in aggregate.
In [Field No. 8] of the RFS0301 report, the importer must enter AGIMP and will have four rows,
one for each RVO.
3.1 Importers: RFS0301 Guidance (also available in the RFS0301 report instructions)
The RFS0301 reporting instructions can be found on the Renewable Fuel Standards Reporting
Forms web page at http://www.epa.gov/otaq/regs/fuels/rfsforms.htm.
Fields that must contain "NA" in the RFS0301: RFS2 2010 Annual Compliance Report
For a row with field 9 as CB, "NA" must be entered in field
14,15,16,17,18,19,20,21,25,26,27
For a row with field 9 as BD, "NA" must be entered in field
14,20,21,22,23,24,26,27,29,30,31
For a row with field 9 as AB, "NA" must be entered in field 14,15,16,20,21,27,29,30,31
For a row with field 9 as RF, "NA" must be entered in field 15,16,29,30,31
Prior-year RIN limits
For a row with field 9 as CB, the amount of prior year RINs that may be used for
compliance must satisfy the following formula:
[No. 22] < 0.20 x [No. 13]
For a row with field 9 as BD, the amount of prior year RINs that may be used for
compliance must satisfy the following formulas:
[No. 17] < 0.087 x ([No. 13] - [No.15] - [No. 16])
[No. 17] + [No. 18] < 0.20 x ([No. 13] - [No.15] - [No. 16])
For a row with field 9 as AB, the amount of prior year RINs that may be used for
compliance must satisfy the following formulas:
[No. 17] < 0.087 x [No. 13]
[No. 17] + [No. 18] + [No. 22] < 0.20 x [No. 13]
For a row with field 9 as RF, the amount of prior year RINs that may be used for
compliance must satisfy the following formulas:
[No. 17] < 0.087 x ([No. 13] + [No. 14])
[No. 17] + [No. 18] + [No. 20] + [No. 22] < 0.20 x ([No. 13] + [No. 14])
Note: In 2010 only, field No. 14 only applies to the Renewable Fuel RVO. In 2011 and
later, field No. 14 will apply to all RVOs.
Deficit Carryover limits
Per §80.1427(b)(l)(iii), an obligated party may not carry more than 57% of their
biomass-based diesel RVO from 2010 to 2011. Therefore, for a row with field 9 as BD,
the following formula must be satisfied:
[No. 32] < 0.57 x [No. 13]
10
-------
Note: This limit does not apply to renewable fuel exporters
3.2 Importers: Deficit Carryovers
An obligated party who fails to meet its obligation in a given year may carryover a deficit into
the following year pursuant to 40 CFR 80.1427(b) given that they meet the following
requirements:
A deficit has not been carried over from the previous year for that specific RVO;
The party meets all RVOs of the deficit category in the following year; and
For biomass-based diesel RVO in 2011, the deficit from 2010 is no larger than 57% of
the party's 2010 biomass-based diesel RVO.
A deficit is calculated according to the following formula:
D;= RVOi- [(ERINNUM)i+ (ERINNUM)i-l]
Where:
D;= The deficit, in gallons, generated in calendar year i that must be carried over to year
i+1 if allowed pursuant to paragraph (b)(l) of this section.
RVO;= The Renewable Volume Obligation for the obligated party or renewable fuel
exporter for calendar year i, in gallons.
(ERINNUM)i= Sum of all acquired gallon-RINs that were generated in year i and are
being applied towards the RVO;, in gallons.
(ERINNUM)i-l= Sum of all acquired gallon-RINs that were generated in year i-1 and are
being applied towards the RVO;, in gallons.
11
-------
4.0 Renewable Fuel Exporters
Renewable fuel exporters must comply in aggregate.
In [Field No. 8] of the RFS0301 report, the exporter must enter EXPRT and will have between
one and four rows based on the export activity.
Note: Renewable fuel exporters that have an RVO other than renewable fuel incur nested
obligations (e.g. for an export of biodiesel, an exporter will have a Biomass-Based Diesel RVO,
an Advanced Biofuel RVO, and a Renewable Fuel RVO). Table 2 describes which volumes of
renewable fuel need to be included when an exporter calculates their RVO(s), pursuant to
§80.1407.
Table 2 - This table describes which volumes of a renewable fuel export incur
specific Renewable Volume Obligations (RVO) pursuant to §80.1430.
Renewable Fuel
Export
Biodiesel
Non-Ester
Renewable Diesel
Cellulosic Biofuel
Cellulosic Diesel
Advanced Biofuel
Renewable Fuel
Cellulosic
Biofuel RVO
No
No
Yes
Biomass-Based
Diesel RVO
Yes
Yes
No
Either Cellulosic Biofuel or
Biomass-Based Diesel (only 1)
No
No
No
No
Advanced
Biofuel RVO
Yes
Yes
Yes
Yes
Yes
No
Renewable
Fuel RVO
Yes
Yes
Yes
Yes
Yes
Yes
4.1 Exporters: RFS0301 Guidance (also available in the RFS0301 report instructions)
The RFS0301 reporting instructions can be found on the Renewable Fuel Standards Reporting
Forms web page at http://www.epa.gov/otaq/regs/fuels/rfsforms.htm.
Fields that must contain "NA" in the RFS0301: RFS2 2010 Annual Compliance Report
For a row with field 9 as CB, "NA" must be entered in field
14,15,16,17,18,19,20,21,25,26,27
For a row with field 9 as BD, "NA" must be entered in field
14,20,21,22,23,24,26,27,29,30,31
For a row with field 9 as AB, "NA" must be entered in field 14,15,16,20,21,27,29,30,31
For a row with field 9 as RF, "NA" must be entered in field 15,16,29,30,31
Fields that must contain "NA in the RFS0301: RFS2 2010 Annual Compliance Report for
Exporters only
For all rows with [Field No. 8] as EXPRT , "NA" must be entered in fields 15 and 16
12
-------
Prior-year RIN limits
For a row with field 9 as CB, the amount of prior year RINs that may be used for
compliance must satisfy the following formula:
[No. 22] < 0.20 x [No. 13]
For a row with field 9 as BD, the amount of prior year RINs that may be used for
compliance must satisfy the following formulas:
[No. 17] < 0.087 x ([No. 13] - [No.15] - [No. 16])
[No. 17] + [No. 18] < 0.20 x ([No. 13] - [No.15] - [No. 16])
For a row with field 9 as AB, the amount of prior year RINs that may be used for
compliance must satisfy the following formulas:
[No. 17] < 0.087 x [No. 13]
[No. 17] + [No. 18] + [No. 22] < 0.20 x [No. 13]
For a row with field 9 as RF, the amount of prior year RINs that may be used for
compliance must satisfy the following formulas:
[No. 17] < 0.087 x ([No. 13] + [No. 14])
[No. 17] + [No. 18] + [No. 20] + [No. 22] < 0.20 x ([No. 13] + [No. 14])
Note: In 2010 only, field No. 14 only applies to the Renewable Fuel RVO. In 2011 and
later, field No. 14 will apply to all RVOs.
4.2 Exporters: Deficit Carryovers
An obligated party who fails to meet its obligation in a given year may carryover a deficit into
the following year pursuant to 40 CFR 80.1427(b) given that they meet the following
requirements:
A deficit has not been carried over from the previous year for that specific RVO; and
The party meets all RVOs of the deficit category in the following year.
A deficit is calculated according to the following formula:
D;= RVOi- [(ERINNUM)i+ (ERINNUM)i-l]
Where:
D;= The deficit, in gallons, generated in calendar year i that must be carried over to year
i+1 if allowed pursuant to paragraph (b)(l) of this section.
RVO;= The Renewable Volume Obligation for the obligated party or renewable fuel
exporter for calendar year i, in gallons.
(ERINNUM)i= Sum of all acquired gallon-RINs that were generated in year i and are
being applied towards the RVO;, in gallons.
(ERINNUM)i-l= Sum of all acquired gallon-RINs that were generated in year i-1 and are
being applied towards the RVO;, in gallons.
13
-------
5.0 Purchasing Cellulosic Biofuel Waiver Credits
Any obligated party, as described in §80.1406, that produces or imports Gasoline or MVNRLM
Diesel fuel for use in the contiguous 48 states plus Hawaii (Alaska if they opt-in) during a given
compliance period, must submit an RFS2 Annual Compliance Report under §80.1451(a).
Pursuant to §80.1456, if EPA reduces the applicable volume of cellulosic biofuel pursuant to
section 21 l(o)(7)(D)(i) of the Clean Air Act (42 U.S.C. 7545(o)(7)(D)(i)) for any given
compliance year, then EPA will provide cellulosic biofuel waiver credits for purchase for that
compliance year.
EPA has three methods for obligated parties to purchase EPA Cellulosic Biofuel Waiver Credits
(Only one may be used):
1. Pay.gov electronic payment (credit card, debit card, or eCheck);
2. Fedwire payment (bank wire transfer); or
3. Mail Payment (paper check).
5.1 Pay.gov Electronic Payments
The OTAQ Cellulosic Biofuel Wavier Credits application is hosted by the Central Data
Exchange (CDX). CDX is the system that EPA has provided to all programs to standardize and
centralize the reporting functions and data submissions that are required of the various EPA
regulated communities. In order to access Cellulosic Biofuel Waiver Credits, users must first be
registered users of CDX.
5.1.1 Adding Pay.gov application to an existing CDX account:
In order to access Pay.gov, the user must add the application to their CDX account. Please add
the Pay.gov application by following these steps:
Login to CDX (http://cdx.epa.gov)
You will be at the MyCDX page. Please select the "Edit Current Account Profiles" link:
14
-------
Welcome.
CDX Registration Status:
Central Data Exc
Active
h a n g e - MyCDX
Last Login:
Registered Since:
Re certification Date:
February 22. 2011
May 7, 2009
May 7, 2009
You have 3 new messages in your Inbox
Chanqe Svstem
Password
I*-"
Edit Personal /td\l
Current ^\
Information \Account Profiles/1
Add New
Employer Profile
Available Account Profiles:
On the Edit Organization Profiles, select the "Add New Program" link:
Program Status
Edit Organization Contact Information
OTAQEMTS
OTAQREG
Add New Pro gram
Add additional programs for Compass,
1 , '
On the Add Program page, find the "Cellulosic Biofuel Waiver Credits Pay.gov
Application (OTAQWaiverCredits) and click "Add":
15
-------
Assessment Cleanup and Redevelopment Exchange System (ACRES): O
Environmental Appeals Board (EAB): O
Audit Policy Self-Disclosure (eDisclosure): O
Facility Registry System - Update Service (FRS-US): O
Great Lakes Environmental Database Query System (GLENDA): O
Exchange Network Grant Semi-Annual Reporting Forms (IEPB): O
Lead-Based Paint Program (LEAD): O
LT2: LT2. Stage 2, and IDSE Plan/Report Entry (LT2): O
National Environmental Methods Index Contaminants (NEMI-CBR): O
Ozone Depleting Substances CODS): O
Cellulosic Biofuel Waiver Credits Pay.gov Application (OTAQWaiverCredits): <
Radionuclide NESHAPs (RAD): O
Radiation Network (RADNET): O
Storm water Notice of Intent (eNOI) (SWENOI): O
Toxic Release Inventory Made Easy Web (TRIMEweb): O
TRI State Data Exchange (TRISDX): O
TSCACTSCA): O
Toxic Substance Control Act- HaSD Form (TSCA-HASD): O
Compliance Information Systems (VERIFY): O
Request Manufacturer Code for OTAQ Compliance (VERIFY MFR REG): O
Water Contaminant Information Tool (WCIT): O
On the Add Role page, all fields are completed with the exception of the "ID" field. Per
the instructions, please enter "N/A" and click "Add":
16
-------
Add Program ID
Use the TAB key to move from field to field. * = REQUIRED FIELD
Submission Method:
Please enter N/A.
You will then receive the following message:
MvCDX > Registntion
Congratulations! You have successfully completed the online portion of CDX registration- You should receive an e-mail confirmation shortly confirming receipt of your information.
Note: EPA must activate the addition ofPay.gov to your CDX profile. Until EPA has activated
this, you will not be able to see the Pay.gov application.
In order to activate the Pay.gov application, users must submit a letter, on company letterhead
requesting the activation of the Pay.gov application:
To Whom It May Concern:
I, [Insert RCO name], [Insert RCO Title], of [Insert Company Name and EPA ID] establish
[User Name] of [User Company J as a delegate for the purpose of submitting the following
reports for me to the US Environmental Protection Agency via the Central Data Exchange
(CDX):
OTAQWaiverCredits: Cellulosic Biofuel Waiver Credits Pay.gov ApplicationCompany
Submitter RolePay.gov portal: Pay.gov is used to purchase cellulosic biofuel waiver credits to
be applied to a company's RVO. In order to use this application, the user must know the amount
of cellulosic biofuel waiver credits that the company needs. Additionally, a company may not
purchase more credits than their company needs; nor may a company transfer credits to another
party.
17
-------
RCO Wet Ink Signature
5.1.2 Accessing the Cellulosic Biofuel Waiver Credit Program Application
In order to access the Cellulosic Biofuel Waiver Credit Program Application, the
"OTAQWaiverCredits: Cellulosic Biofuel Waiver Credits Pay.gov Application" must be active
in the user profile. Once it is active, it will show up on the MyCDX homepage. Click on the
"OTAQWaiverCredits: Cellulosic Biofuel Waiver Credits Pay.gov Application" link to continue.
The Cellulosic Biofuel Waiver Credit Program Home page looks like this:
Cellulosic Biofuel Waiver Credits
Cellulosic Biofuel Waiver Credit Home
About Cellulosic Biofuel Waiver Credits
Once on the homepage, click on "Purchase Credits" link to the left of the page.
The "Purchase Information" page is where you will provide your payment information:
18
-------
Cellulosic Biofuel Waiver Credits
Purchase Credits
Purchase Information
Price per credit for 2010: $1.56
Company: MRR Inc [3244]
Compliance Level:
Facility ID:
Number of Credits:
Aggregate Refiner v
The following information must be provided on the Purchase Credits page:
o Company Name (selected from the drop down menu);
o Compliance Level;
o Facility ID (only required if complying on a refinery by refinery basis); and
o Number of Credits to be purchased.
Once all the information has been entered on the Purchase Credits page, click the
"Calculate Total" button.
This will direct you to the Review Purchase Information page:
Cellulosic Biofuel Waiver Credits
Review Purchase Information
Purchase Information
You are purchasing 300 credits at a price of $ 1. 56 per credit for a total of $468.00.
Note: Your order will not be complete until you submit payment information to Pay.goy
Confirm the following information on the Purchase Information page:
o Amount of credits being purchased;
o Per-credit price; and
o Total purchasing price.
19
-------
If all the information looks correct click the "Continue to Pay.gov" button.
20
-------
The Payment Information must be entered in order to continue with the purchase:
<&EPA
United States Environmental Protection Agency
Cellulosic Biofuel Waiver Credits
System Message
The system has |>o|>u Kited the Payment Date witli the next >i vail a hie payment date.
Online Payment
Step 1: Enter Payment Information
Pay Via Bank Account (ACH) Ahotil ACH Debit
Required fields are indicated with a red asterisk '
Account Holder Name:
Return to your originating application
Payment Amount: $312.00
Account Type:
Rontiiuj Number:
Account Number: |
Confirm Account Number:
Check Number:
vl*
Routing Number
Account Number
76
Check Number
I
Payment Date: 02/10/201 1
Number of Credits: 200
Total Purchase (in USD): 31 2.0
Company Maine: MRR Inc
Company ID: 3244
Facility ID (only if complying on a Refiner hy
Refinei basis):
Select the"Continue with ACH Pamir nt" button
-------
The Authorize Payment page contains the payment summary. Users may opt to enter in
an email address to receive a confirmation receipt if they choose.
&EPA
United States Environmental Protection Agencv
Cellulosic Biofuel Waiver Credits
Return to your originating application
Online Payment
Step 2: Authorize Payment 1 | 2
Payment Summary Edit this information
Payment Date: 02/02/2011
Number of Credits: 200
Total Purchase Jin USD): 312.0
Company Name: MRR Inc
Company ID: 3244
Facility ID (only if complying on a Refinei by
Refiner basis):
Email Confirmation Receipt
To have a confirmation sent to you upon completion of this transaction, provide an email address and confirmation below.
Email Address:
Account Holdei Name: Test
Payment Amount: $312.00
Account Type: Personal Checking
Routine) Nu mbe i:042000424
Account Number: 1111
Check Number: 1111
Confirm Email Address:
CC:
Separate wuftiple entail
Authorization and Disclosme
Required fields are indicated with a red asterisk
I agree to the authorization and disclosure l
Authorisation and DisclosureConsumers and Businesses
The debit transact ion(s) to which you are agreeing are handled on behalf of Federal
agencies by "Pay.gov," which consists of services offered by the U.S. Treasury
Department's Financial Management Service. As used in this document, "roe" or "us"
refers to the Financial Management Service and its agents and contractors operating
Pay.gov. "You" refers to the end-user reading this document and agreeing to it prior
to engaging in a debit transaction.
I. Consumers
A. Authorization
You acknowledge that you have read and understand the consumer disclosure language and
authorize the Federal Reserve financial institution of Cleveland to debit the named
financial institution account. This authorization is to remain in full force and
effect until we have received notification of its termination in such time and in such
manner as to afford Pay.gov a reasonable opportunity to act on it, or unless otherwise
terminated for any reason by Pay.gov.
B. Disclosure
-
-
View Authorization and Disclosure in a separate window.
Press the "Submit Payment" Button only once^ Pressing the Jjutton more than once could result in multiple transactions.
^"^^^ ^^^^^"^^^ '
Submit Payment _j Cancel
Note: Please avoid navigating the site using your browser's Back Button - this may lead to incomplete data being transmitted
and pages being loaded incorrectly. Please use the links provided whenever possible.
22
-------
If all the information is correct, the user must read accept the Authorization and
Disclosure statement by clicking on the check box. Then the user may click "Submit
Payment".
Once the submission has been accepted, the Credit Purchase History Detail page will
be displayed. At the top of this page, it will indicate that the submission was a success:
Cellulosic Biofuel Waiver Credits
LUContact Us
Credit Purchase History Detail
ruicnaif miurmiiiioii
Transaction ID: EPAQTAQBIOFUELQOQ0201
Status:
Purchase Date:
User ID:
User Name:
Company:
Compliance Level:
Number of Credits:
Price per credit:
Total Purchase:
Year:
Success
02/01/2011 11:46 AM
JENNIFERPAIME
Jennifer L Paine
MRR Inc [3244]
Aggregate Refiner
200
$1.56
$312.00
2010
Congratulations! You have successfully submitted your payment to purchase cellulosic biofuel
waiver credits.
If you have any general or technical questions related to the Central Data Exchange (CDX) you
may contact any of the following:
Telephone - Person-to-person telephone support is available from the CDX Help Desk 8:00
am - 6:00 pm EST. Call our toll-free line at 888-890-1995.
Email - Send e-mail to Technical Support at helpdesk@epacdx.net with "Technical Support"
in the Subject line.
Fax- Assistance requests are accepted 24 hours a day at 703-227-4199. Support personnel
will respond to faxed requests Monday through Friday from 8:00 am to 6:00 pm EST.
23
-------
5.2 Electronic Payments via Fedwire
Be sure to include your company name, company id and reference "EPA Cellulosic Biofuel
Waiver Credits" on the funds transfer.
Receiving Financial Institution = TREAS NYC
Receiving FI ABA (routing #) = 021030004
Beneficiary Account = 68011233
Beneficiary Name = EPA
On the RFS0301 Report, [Field No. 30] = Fedwire
5.3 Mail Payment
Parties must submit the RFS2 Cellulosic Biofuel Waiver Credit Form along with their paper
checks. This form can be found on the RFS Reporting Forms webpage
http://www.epa.gov/otaq/regs/fuels/rfsforms.htm
In addition to the form mentioned above, paper checks must have the following information:
Pay to the order of: U. S. EPA
Memo: RFS2 - CB
Address for check payments:
US Environmental Protection Agency
Las Vegas Finance Center
PO Box 979087
St. Louis, MO 63197-9000
On the RFS0301 Report, [Field No. 30] = Mail
Additional Notes:
Renewable Fuel Exporters and other non-obligated parties may not purchase EPA
cellulosic biofuel waiver credits
Pursuant to 80.1456(b)(2), EPA cellulosic biofuel waiver credits are nonrefundable.
Pursuant to 80.1456(b)(3), EPA cellulosic biofuel waiver credits are nontransferable.
Pursuant to 80.1456(b)(4), EPA cellulosic biofuel waiver credits may only be used for an
obligated party's current year cellulosic biofuel RVO and not towards any prior year
deficit cellulosic biofuel volume obligations.
24
------- |