E85 and  Flex Fuel Vehicles
                         Ethanol is a renewable fuel made from plants. Essentially non-drinkable
                         grain alcohol, ethanol is produced by fermenting plant sugars. It can
                     be made from corn, sugar cane, and other starchy agricultural product.
                     The cellulose in agricultural wastes such as waste woods and corn stalks
                     (also know as "cellulosic ethanol") can also be used as a base. In the
                     United States, most ethanol is currently made from corn, although because
                     of rapidly developing research, cellulosic ethanol may soon become a
                     larger part of the market.
                     E85 Fuel
                     While pure ethanol is rarely used for transportation fuel, there are several ethanol-
                     gasoline blends in use today. E85 is a blend of 85 percent denatured ethanol and 15
                     percent gasoline. In certain areas, higher percentages of gasoline will be added to
                     E-85 during the winter to ensure that vehicles are able to start at very cold temperatures,

                     E85 cannot be used in a conventional, gasoline-only engine. Vehicles must be
                     specially designed to run on it. The only vehicles currently available to U.S. drivers
                     are known as flex fuel vehicles (FFVs), because they can run on E85, gasoline, or any
                     blend of the two. Much like diesel fuel, E85 is available  at specially-marked fueling
                     pumps. Today, over 1,900 fueling stations offer it.

                     Another common mix is E10, a blend of 10 percent ethanol and 90 percent gasoline,
                     E10 is available in many areas across the United States and can be used in any gasoline
                     vehicle manufactured after 1980,
SEPA
United States
Environmental Protection
Agency
Office of Transportation and Air Quality
                  EPA-420-F-10-010a
                          May 2010

-------
Flex Fuel Vehicles
Ethanol-fueled vehicles date back to the 1880s when Henry Ford designed a car that ran solely
on ethanol. He later built the first flex fuel vehicle: a 1908 Model T designed to operate on
either ethanol or gasoline.

Today's FFVs feature specially-designed fuel systems and other components that allow a vehicle
to operate on a mixture of gasoline and ethanol that can vary from 0 percent to 85 percent
ethanol. These cars and trucks have the same power, acceleration, payload, and cruise speed as
conventionally fueled vehicles. Maintenance for ethanol-fueled vehicles is very similar to that
of regular cars and trucks. However, owners should identify the car as an FFV when ordering
replacement parts.

Today, the United States has nearly 8 million FFVs on the road. These vehicles are available in
a range of models, including sedans, pick-up trucks, and minivans. Additionally, several auto
manufacturers have announced plans to greatly expand the number of FFV models they will offer.
In fact, you may even be driving one now. To find out, check the  inside of your gas tank door for
an identification sticker.
Affordability
FFVs are priced the same as gasoline-only vehicles, offering drivers the opportunity to buy an
E85 capable vehicle at no additional cost.

In general, E85 reduces fuel economy and range by about 20-30 percent, meaning an FFV will
travel fewer miles on a tank of E85 than on a tank of gasoline. This is because ethanol contains
less energy than gasoline. Vehicles can be designed to be optimized for E85--which would reduce
or eliminate this tendency. However, no such vehicles are currently on the market. The pump
price for E85 is often lower than regular gasoline; however, prices vary depending on supply and
market conditions.
E85 & Conventional Vehicles
Consumers should never use E85 in a conventional, gasoline-only vehicle. This can lead to a
range of problems, including not being able to start the engine, damage to engine components,
illumination of the check engine light, and emissions increases.

It is technically possible to convert a conventional gasoline vehicle to run on E85; however,
such conversions may be in violation of the anti-tampering prohibition of the Clean Air Act
unless they are certified by the U.S. Environmental Protection Agency (EPA). In addition,
converting a conventional vehicle to E85 may violate the terms of the vehicle warranty.
For more information on the vehicle conversion processs, please visit EPA's Web site at:
www.epa.gov/otaq/consumer/fuels/altfuels/altfuels.htm.

-------
Benefits
Much of the increased interest in ethanol as a vehicle fuel is due to its ability to replace gasoline
from imported oil. The United States is currently the world's largest ethanol producer, and most
of the ethanol we use is produced domestically from corn grown by American farmers.

E85 can also provide important reductions in greenhouse gas (GHG) emissions.

EPA's stringent Tier II vehicle emission standards require that FFVs achieve the same low
emissions level regardless of whether E85 or gasoline is used. However, E85 can further reduce
emissions of certain pollutants as compared to conventional gasoline or lower volume ethanol
blends. For example, E85 is less volatile than gasoline or low volume ethanol blends, which
results in fewer evaporative emissions. Using E85 also reduces carbon monoxide emissions and
provides significant reductions in emissions of many harmful toxics, including benzene, a known
human carcinogen. However, E85 also increases emissions of acetaldehyde~a toxic pollutant.

-------