THE ENVIRONMENTAL TECHNOLOGY VERIFICATION
PROGRAM
U.S. Environmental Protection Agency
INTERNATIONAL
ETV Joint Verification Statement
TECHNOLOGY TYPE:
APPLICATION:
TECHNOLOGY NAME:
COMPANY:
ADDRESS:
WEB SITE:
E-MAIL:
MOBILE DIESEL ENGINE AIR POLLUTION CONTROL
CONTROL OF EMISSIONS FROM MOBILE DIESEL ENGINES
IN HIGHWAY USE BY SELECTIVE CATALYTIC REDUCTION
AND A CATALYZED CONTINUOUSLY REGENERATING TRAP
SCCRT®, VERSION 1 , SELECTIVE CATALYTIC REDUCTION
WITH A CATALYZED CONTINUOUSLY REGENERATING
TRAP
JOHNSON MATTHEY PLC
380 LAPP ROAD
MALVERN, PA 19355
(610)254-5373
FAX: (610)971-3116
http://www.jmusa.com
joshia@jmusa.com
The U.S. Environmental Protection Agency (EPA) created the Environmental Technology Verification
(ETV) Program to facilitate the deployment of innovative or improved environmental technologies
through performance verification and dissemination of information. The goal of the ETV Program is to
further environmental protection by accelerating the acceptance and use of improved and cost-effective
technologies. The ETV Program seeks to achieve this goal by providing high-quality, peer-reviewed data
on technology performance to those involved in the design, distribution, financing, permitting, purchase,
and use of environmental technologies.
The ETV Program works in partnership with recognized standards and testing organizations; stakeholder
groups, which consist of buyers, vendor organizations, permitters, and other interested parties; and with
the full participation of individual technology developers. The program evaluates the performance of
innovative technologies by developing test plans that are responsive to the needs of stakeholders,
conducting field or laboratory tests (as appropriate), collecting and analyzing data, and preparing peer-
reviewed reports. All evaluations are conducted in accordance with rigorous quality assurance (QA)
protocols to ensure that data of known and adequate quality are generated and that the results are
defensible.
-------
The Air Pollution Control Technology Center (APCT Center), which is one of six centers under the ETV
Program, is operated by RTI International1 (RTI) in cooperation with EPA's National Risk Management
Research Laboratory. The APCT Center has evaluated the performance of an emission control system
consisting of a selective catalytic reduction (SCR) technology with a catalyzed continuously regenerating
trap (CCRT).
ENVIRONMENTAL TECHNOLOGY VERIFICATION TEST DESCRIPTION
All tests were performed in accordance with the Test/QA Plan for the Verification Testing of Selective
Catalytic Reduction Technologies for Highway, Nonroad and Stationary Use Diesel Engines and the
Test-Specific Addendum to ETV Mobile Source Test/QA Plan for Johns on Matthey for the SCCRf8, v.l
System. These documents are written in accordance with the applicable generic verification protocol and
include requirements for quality management and QA; procedures for product selection and auditing of
the test laboratories; and the test reporting format.
The mobile diesel engine air pollution control technology was tested in February 2011 at Southwest
Research Institute. The performance verified was the percentage of emissions reduction achieved by the
technology for particulate matter (PM), nitrogen oxides (NOX), hydrocarbons (HC), and carbon monoxide
(CO) relative to the performance of the same baseline engine without the technology in place. Operating
conditions were documented, and ancillary performance measurements also were made. A summary
description of the ETV test is provided in Table 1.
Table 1. Summary of the Environmental Technology Verification Test
Test type
Engine family
Engine make-model year
Service class
Engine rated power
Engine displacement
Technology
Technology description
Test cycle or mode
description
Test fuel description
Critical measurements
Ancillary measurements
Highway Transient Federal Test Procedure
6CEXH0661MAV
Cummins - 2006 ISM 330
Highway, heavy-duty diesel engine
330 hpat 1800 rpm
10.8 L, inline six cylinder
Johnson Matthey SCCRT®, v.1
SCR combined with a CCRT
One cold-start and multiple hot-start tests according to FTP and one SET
for baseline engine, degreened, and aged systems
Ultra-low-sulfur diesel fuel with 15 ppm sulfur maximum
PM, NOX, HC, and CO
CO2, NO, NO2 (by calculation), NH3, soluble organic fraction of PM,
exhaust backpressure, exhaust temperature, and fuel consumption
Note: CO2 = carbon dioxide, FTP = Federal Test Procedure, hp = horsepower, NO = nitric oxide, NO2 =
nitrogen dioxide, NH3 = ammonia, ppm = parts per million, rpm = revolutions per minute, SET =
Supplemental Emission Test.
Beginning of table description. Table 1 is titled Summary of the Environmental Technology Verification
Test. The table lists the type of test conducted, the critical and ancillary measurements taken, the
characteristics of the test engine, and the technology undergoing verification testing. End of table
description.
' RTI International is a trade name of Research Triangle Institute.
-------
VERIFIED TECHNOLOGY DESCRIPTION
The Johnson Matthey SCCRT®, v.l technology is a urea-based SCR system combined with a CCRT filter
designed for on-highway light, medium, and heavy heavy-duty diesel, urban and non-urban bus, exhaust
gas recirculation (EGR)- or non-EGR-equipped engines for use with commercial ultra-low-sulfur diesel
fuel (ULSD) conforming to 40 Code of Federal Regulations 86.1313-2007.
This verification statement describes the performance of the tested technology on the diesel engine and
fuels identified in Table 1 and applies only to the use of the Johnson Matthey SCCRT®, v. 1 system on
highway engines fueled by ULSD (15 parts per million [ppm] or less) fuel.
The monitoring and notification system that was functionally tested and used with this technology
includes sensors for urea level and leakage detection and a mechanism to interrupt engine restart in the
event of an empty urea tank.
VERIFICATION OF PERFORMANCE
The Johnson Matthey SCCRT®, v.l system achieved the reduction in tailpipe emissions shown in Table 2
compared to baseline operation without the system installed on the test engine. In Table 2, "degreened"
refers to a system with 25-124 hours of accumulated run time while "aged" refers to a system with over
1000 hours of accumulated run time. Additionally, the functional test results indicated proper operation of
the monitoring and warning system.
Table 2a. Verified Emissions Reductions:
Mean Emissions Reduction '0/-
System Type
Degreened
Aged
Fuel
ULSD
ULSD
PM
94
92
NOX
76
73
HC
94
92
CO
89
87
Table 2b. Verified Emissions Reductions:
95% Confidence Limits on the Emissions Reduction (%)
System Type
Degreened
Aged
Fuel
ULSD
ULSD
PM
91 to 98
89 to 95
NOX
75 to 77
72 to 74
HC
80toa
77toa
CO
69toa
66toa
3 The upper limit of the emissions reduction could not be distinguished from 100% with
95% confidence.
Beginning of table description. Table 2 is titled Verified Emissions Reductions. The table
describes the verified emissions reduction percentages for the degreened and aged
systems for particulate matter, nitrogen oxides, hydrocarbons, and carbon monoxide.
95% confidence limits for these reductions are also listed. End of table description.
The APCT Center quality manager has reviewed the test results and quality control (QC) data and has
concluded that the data quality objectives given in the generic verification protocol and test/QA plan have
been attained. APCT Center QA staff have conducted technical assessments of the test laboratory
procedures and of the data handling. These assessments confirm that the ETV tests were conducted in
accordance with the EPA-approved test/QA plan.
in
-------
This verification statement verifies the emissions characteristics of the Johnson Matthey SCCRT®, v. 1
system for the stated application. Extrapolation outside that range should be done with caution and an
understanding of the scientific principles that control the performance of the technology. This verification
focuses on emissions. Potential technology users may obtain other types of performance information from
the manufacturer.
In accordance with the generic verification protocol, this verification statement is valid, commencing on
the date below, indefinitely for application of the Johnson Matthey SCCRT®, v. 1 system within the range
of applicability of the statement.
signed by Sally Gutierrez 8/22/2011 signed by Jason Hill 8/8/2011
Sally Gutierrez Date Jason Hill Date
Director Director
National Risk Management Research Laboratory Air Pollution Control Technology Center
Office of Research and Development RTI International
United States Environmental Protection Agency
NOTICE: ETV verifications are based on an evaluation of technology performance under specific,
predetermined criteria and the appropriate quality assurance procedures. EPA and RTI make no express or
implied warranties as to the performance of the technology and do not certify that a technology will
always operate as verified. The end user is solely responsible for complying with any and all applicable
federal, state, and local requirements. Mention of commercial product names does not imply endorsement.
IV
------- |