ENERGY STAR® Guide for Restaurants
Putting Energy into Profit
ENERGYSTAR
&ER&
United States
Environmental Protection
Agency
-------
LEARN MORE AT
energystar.gov
ENERGY STAR®, a U.S. Environmental Protection Agency
program, helps us all save money and protect our environment
through energy efficient products and practices. For more
information, visit www.energystar.gov.
Contents
Energy Efficiency and Your Restaurant....
Cooking Appliances
Refrigeration Systems and Ice Machines.
Lamps and Lighting Fixtures
Page
7
2
5
Heating, Cooling, and Ventilation 6
Water and Waste Management 7
Begin the Process, Learn More, and Save! 8
IN PARTNERSHIP WITH
PG&E Food Service Technology Center is the industry leader in commercial kitchen energy efficiency and appliance-performance testing as
well as a leading source of expertise in commercial kitchen ventilation and sustainable building design.
National Restaurant Association's Conserve initiative explores conservation efforts in restaurants around the nation and offers suggestions
and resources to help operators reduce their costs and improve their environmental performance.
ACKNOWLEDGEMENTS
This best-practices guide was created with the assistance of California's four investor-owned utilities (Southern California Gas Company,
Pacific Gas and Electric Company, San Diego Gas and Electric Company, and Southern California Edison). These energy suppliers are
working together to provide comprehensive energy efficiency resources for California's food service industry, including, but not limited
to, the following resources: rebates for cooking and refrigeration equipment, food-service-specific seminars and workshops. Web tools,
energy audits, appliance testing, and energy education centers. The California energy-efficiency research and educational programs
are funded by California ratepayers under the auspices of the California Public Utilities Commission and are administered by the four
investor-owned utilities.
Sempra Energy utility'
www.socalgas.com/bus/ness
www.pge.com/fstc
A Sempra Energy utility"
www. sdge. com/foodserv/ce
SOUTHERN CALIFORNIA
EDISON1
An EDISON INTERNATIONAL* Company
www.sce.com/CTAC
Disclaimer: all energy, water, and monetary savings listed in this document are based upon average savings for end
users and are provided for educational purposes only. Actual energy savings might vary based on use and other factors.
-------
FIVE EASY STEPS TO SAVE ENERGY AND WATER
Install ENERGY STAR qualified light bulbs
and light fixtures throughout your restaurant
where appropriate.
Install a high-efficiency pre-rinse spray
valve in your dishroom and save hundreds of dollars
a year!
Fix water leaks immediately—especially
hot water leaks: wasted water, sewer, and water
heating costs can add up to hundreds of dollars a year.
Perform walk-in refrigerator
maintenance: check and replace door gaskets;
clean evaporator and condenser coils; check
refrigerant charge.
Select ENERGY STAR qualified
equipment, especially to replace worn-out cooking
and refrigeration equipment.
Get additional easy to
implement tips at:
http://conserve.restaurant.org
Energy efficiency is a sound business practice that improves profitability, reduces greenhouse
gas emissions, and conserves natural resources. This guide is designed to help your restaurant
save energy and water and boost your bottom line while helping to protect the environment.
ENERGY EFFICIENCY AND YOUR RESTAURANT
Restaurants use about 5 to 7 times more energy per square foot
than other commercial buildings, such as office buildings and
retail stores. High-volume quick-service restaurants (QSRs) may
even use up to 10 times more energy per square foot than other
commercial buildings.
Most commercial kitchen appliances are energy intensive. For
instance, a typical electric deep fat fryer uses more than 18,000
kilowatt-hours (kWh) of energy per year, which could cost you
more than $1,700 in electricity.
As energy costs increase, investing in energy efficiency is the best
way to protect your business against these rising prices.
You can reduce your restaurant's energy consumption by following
the Cost Saving Tips outlined below and throughout this guide:
• Select ENERGY STAR qualified appliances. If you're in the
market for new equipment, think in terms of life-cycle costs,
which include purchase price, annual energy costs, and other
long-term costs associated with the equipment. While high-
efficiency appliances could cost more up front, significantly
lower utility bills can make up for the price difference. Be
sure to ask your dealer or kitchen designer to supply you with
ENERGY STAR qualified equipment.
• Cut idle time. If you leave your equipment ON when it is not
performing useful work, it costs you money. Implement a
startup/shutdown plan to make sure you are using only the
equipment that you need, when you need it.
Example of the Average Energy
Consumption in a Full-Service Restaurant
(British Thermal Units [Btu])
Sanitation
18%
Refrigeration
6%
Lighting
13%
Food
Preparation
35%
HVAC
28%
Maintain and repair. Leaky walk-in refrigerator gaskets, freezer
doors that do not shut, cooking appliances that have lost their
knobs—all these "energy leaks" add up to money wasted each
month. Don't let everyday wear and tear drive up your energy bills.
Cook wisely. Ovens tend to be more efficient than rotisseries;
griddles tend to be more efficient than broilers. Examine your
cooking methods and menu; find ways to rely on your more
energy-efficient appliances to cook for your customers.
Recalibrate to stay efficient. The performance of your kitchen
equipment changes over time. Thermostats and control
systems can fail, fall out of calibration, or be readjusted. Take
the time to do a regular thermostat check on your appliances,
refrigeration, dish machines, and hot water heaters and reset
them to the correct operating temperature.
-------
COOKING APPLIANCES
When replacing old appliances or buying new ones, look beyond
the sticker price. Buying and installing equipment that has earned
the ENERGY STAR could trim hundreds of dollars from your annual
utility bills. In order to realize the most savings from your ENERGY
STAR qualified equipment, you must train your staff to use energy
wisely by following good operating practices.
Steamers
Steam cookers provide an effective way to batch-cook food but
generating steam is an energy-intensive process. ENERGY STAR
qualified steamers have a sealed cooking cavity that consumes a
fraction of the energy and water required by traditional open systems.
In many cases the dollar savings are so great that it makes sense to
replace an existing steamer with an ENERGY STAR qualified one.
Cost-Saving Tips
> Look for the ENERGY STAR
> Close the door
> Use the timer
> Cut idle time
> Maintain & repair
ENERGY STAR qualified steamers can save:
• $1,000 for water and sewer costs annually
• $1,100 to $1,200 in gas or electricity annually
(gas or electric steamers)
Equating to more than $2,100 total savings annually
(some restaurants with high commercial sewer costs can
save hundreds of dollars more annually)
Good practices can save:
$250 to $350 in annual energy costs for a traditional, electric,
open-system steamer by eliminating an hour of idle time per day.
Fryers
Energy-efficient fryers that have earned the ENERGY STAR
offer shorter cook times, faster temperature recovery times, and
ultimately higher pound-per-hour production rates through advanced
burner and heat exchanger designs. Some models also offer an
insulated fry pot, which reduces standby losses, giving the fryer a
lower idle energy rate.
Cost-Saving Tips
> Look for the ENERGY STAR
> Cut idle time & turn off back-up
fryers when possible
> Recalibrate
ENERGY STAR qualified fryers can save:
• $100 for electricity annually (electric fryer), or
• $470 for gas annually (gas fryer)
Good practices can save:
$400 annually for a gas fryer by cutting four hours of idle
time per day.
Convection Ovens
Convection ovens are the industry standard due to faster cook-
times produced by increased hot air movement inside the oven
cavity. In addition, convection ovens are now eligible for ENERGY
STAR qualification.
Cost-Saving Tips
> Look for the ENERGY STAR
> Cut idle time & turn off back
up ovens when possible
> Fully load the oven when
cooking
> Replace seals & tighten
hinges
ENERGY STAR qualified convection ovens can save:
• $190 for electricity annually (electric oven), or
• $360 for gas annually (gas oven)
-------
Griddles
Griddles are a versatile piece of equipment and a workhorse
appliance found on most kitchen lines. Variations in efficiency,
production capacity, and temperature uniformity make it important
to choose wisely when shopping for a griddle. Many energy-
efficient griddles can deliver both high production capacity and
excellent temperature uniformity.
Cost-Saving Tips
> Look for the ENERGY STAR
> Cut idle time
I Recalibrate
•
;
ENERGY STAR qualified griddles can save:
• $190 for electricity annually (electric griddle), or
• $175 for gas annually (gas griddle)
Good practices can save:
$250 annually from a gas griddle by cutting three hours of
idle time per day.
Holding Cabinets
ENERGY STAR hot food holding cabinets typically feature
improved insulation, so heat stays in the cabinet and out of the
kitchen. An insulated ENERGY STAR holding cabinet uses about
half the energy consumed by an uninsulated cabinet. Other
available features that could potentially save energy include
magnetic door gaskets, auto-door closers, and dutch doors.
Cost-Saving Tips
> Look for the ENERGY STAR
> Shut off overnight
> Use the timer
> Replace missing or worn out
control knobs
ENERGY STAR qualified holding cabinets can save:
• $650 annually for electricity
Good practices can save:
$500 annually by turning off an uninsulated holding cabinet
when the kitchen is closed.
Combination Ovens
The combination oven is an extremely
versatile cooking platform with the
added bonus of a self-cleaning feature.
Operating a combination oven in "steam"
or "combination" mode typically uses
more energy and water than operating
in traditional convection mode. Use
the oven's programming capabilities to
properly control different cooking modes •
to maximize energy efficiency and cost
savings. Do your homework when buying a combination oven: the
most efficient models will use about half as much energy and water
as the inefficient models.
Good practices can save:
$400 to $800 annually off an electric combination oven by
cutting out two hours of idle time per day.
If ENERGY STAR qualified models don't exist for the
type of equipment you're looking for, don't worry: you
still have options. Ask distributors and manufacturers
for energy use information, and check online for
equipment reviews. The California commercial food
service incentive program is also a third-party resource
because, like ENERGY STAR, appliances that qualify
must meet designated efficiency standards. The list of
qualifying appliances can be found at: www.fishnick.
com/saveenergy/rebates.
-------
Broilers
Broilers are true kitchen workhorses but their dependability and
simplicity come at a price: searing heat requires a great deal
of energy and broilers have simple, non-thermostatic controls.
This combination can make the broiler the most energy-intensive
appliance in the kitchen. For example, one gas broiler can use
more energy than six gas fryers. A new generation of broilers
incorporates better controls that limit the overall burner output,
allowing the broiler to get the job done while consuming about 25
percent less energy.
Cost-Saving Tips
> Cut preheat time
> Turn off unneeded sections
> Reduce idle time
> Replace missing knobs
REFRIGERATION SYSTEMS AND ICE MACHINES
Reach-In Refrigerators and Freezers
Compared to standard models, ENERGY STAR qualified commercial
refrigerators and freezers (glass and solid door) can lead to
an average energy savings of 30 percent. Features that could
potentially save energy include improved insulation and components
such as high-efficiency compressors and motors.
Cost-Saving Tips
> Look for the ENERGY STAR
> Turn off door heaters
when possible
> Clean coils
> Set defrost timers
> Replace worn gaskets
Good practices can save:
$900 annually by cutting out three hours of idle time per day.
Ranges
The range top is one of the most widely used pieces of equipment
in restaurant kitchens. Ranges are manually controlled and can be
energy guzzlers depending on how you operate them. A potential
alternative to traditional range tops is induction ranges; they are
more expensive but offer very high efficiency, rapid heat up, precise
controls, and low maintenance.
Cost-Saving Tips
> Maintain and adjust burners
Use a lid
Cut idle time
ENERGY STAR qualified commercial refrigerators and
freezers can save:
• $55 for electricity annually (per solid door refrigerator)
or $70 annually (per glass door refrigerator)
• $175 for electricity annually (per solid door freezer) or
$320 annually (per glass door freezer)
Walk-In Refrigerators
Walk-in refrigerators are extremely important to any successful
restaurant. Improve this equipment's energy performance with a
few inexpensive upgrades and good practices, such as:
• Swapping out incandescent light bulbs for ENERGY STAR
qualified LED light bulbs can keep the temperatures lower
because they generate considerably less heat.
a Adding strip curtains and automatic door closers to your walk-
in refrigerator: they are inexpensive and easy-to-install.
Strip curtains can cut outside air infiltration by about 75
percent!
• Installing electronically commutated motors (ECM) on
the evaporator and condenser fans reduces fan energy
consumption by approximately two-thirds.
Cost-Saving Tips
> Allow air circulation
> Insulate suction lines
> Check refrigerant charge
> Repair and realign doors
> Clean coils
0
-------
Ice Machines
Commercial ice machines that earn the ENERGY STAR are on
average 15 percent more energy efficient and 10 percent more
water efficient than standard models.
» Cut down on your daytime electricity demand by installing a
timer and shifting ice production to nighttime off-peak hours.
I.L Bigger ice machines are typically more efficient than smaller
ones, yet the price difference is usually not very large. Choose
wisely and you could get twice the ice capacity at half the
energy cost per pound of ice.
• Avoid water-cooled ice machines because of their high water
cost, which makes them significantly more expensive
Cost-Saving Tips
> Look for the ENERGY STAR
> Clean the coils
> Keep the lid closed
> Adjust the purge water timer
ENERGY STAR qualified ice machines can save:
• $130 for electricity annually
• $18 for water annually
LAMPS AND LIGHTING FIXTURES
In a typical restaurant, lights are usually on for 16 to 20 hours a
day. For many areas in your restaurant, high-efficiency ENERGY
STAR CFLs and lighting fixtures are your ticket to savings.
Mercury and CFLs
CFLs contain a very small amount of mercury sealed
within the glass tubing (approximately 4 milligrams).
By comparison, older thermometers contain about
500 milligrams of mercury—an amount equal to the
mercury in 125 CFLs. No mercury is released when
the bulbs are intact (not broken) or in use. For more
information about recycling and disposing of CFLs,
visit: www.energystar.gov/mercury.
Install ENERGY STAR qualified fixtures and light bulbs
(CFLs or LEDs) in your dining area and reduce energy
consumption and heat output by 75 percent. ENERGY
STAR qualified lighting also lasts 10-50 times longer than
incandescent lighting.
Install occupancy sensors in closets, storage rooms, break rooms,
restrooms, and even walk-in refrigerators. Look for sealed, low-
temperature-specific sensors for refrigerated environments. Be
sure to ensure compatibility with your energy-efficient lighting.
If your restaurant features linear fluorescent lighting with T12 lamps
and magnetic ballasts, it is time to upgrade. Switch to more efficient
T8 or T5 lamps with electronic ballasts. Electronic ballasts typically
have faster on-times and do not hum or flicker. Look for utility
incentives for lighting upgrades in your area.
Swap your old Open/Closed and EXIT signs with LED
technology for electricity savings of up to 80 percent.
Visit www.energystar.gov/lighting for more cost-saving information.
Annual Savings After Replacing
Eight Incandescent Lamps with Eight CFLs
Incandescent Lamp CFL
'Calculations based on 100-Watt lamp and average commercial electric rate of $.0953/kWh.
CFL vs. Incandescent Light Bulbs: Potential Savings
Across U.S. Restaurants
If each of the nearly one million restaurants in the United States
replaced only one incandescent light bulb with a CFL, more than 645
million pounds of C02 emissions could be avoided each year (the annual
greenhouse gas emissions from nearly 57,400 passenger vehicles*),
and the restaurant industry could save over $40 million annually.
'Source of equivalency calculations: EPA Greenhouse Gas Equivalencies Calculator:
www.epa.gov/cleanenergy/energy-resources/calculator.html. Calculations based on
960,000 restaurants according to the National Restaurant Association 2011 Restaurant
Industry Forecast.
-------
HEATING, COOLING, AND VENTILATION
Making smart decisions about your restaurant's heating,
ventilating, and air conditioning (HVAC) system can have a big
effect on your utility bills—and your customers' comfort.
Heating and Cooling Systems
Heating and cooling systems account for a large portion of your
restaurant's annual energy use. For many restaurants, heating and
cooling is second only to food
preparation in terms of annual
energy consumption.
Cost-Saving Tips
Look for the ENERGY STAR
Clean heat-transfer coils
Replace air filters
Consider an Energy
Management System
Repair broken duct work
Recommission economizers
Energy use falls by 4 to 5
percent for every degree
that you raise your cooling
thermostat setpoint. Easing
back on central cooling by only
3°F could trim air conditioning
costs by 12 to 15 percent.
Improve customer comfort
by using an efficient ENERGY STAR qualified ceiling fan to
compensate for the difference in air temperature. Ensure that your
heating and cooling equipment is included in the start-up and shut
down schedule to save even more.
Don't forget about the restroom! ENERGY STAR qualified
ventilating fans use 70 percent less energy than standard models.
According to the Consortium for Energy Efficiency
(CEE), at least 25 percent of all rooftop HVAC units
are oversized, resulting in increased energy costs and
equipment wear. Properly sized equipment dramatically
cuts energy costs, increases the life of the equipment,
and reduces greenhouse gas emissions.
Kitchen Ventilation
An unbalanced or poorly designed kitchen exhaust system can
allow heat and smoke to spill into your kitchen, spelling trouble for
both your restaurant's air quality and for your utility bills. Spillage
leads to a hot, uncomfortable working environment and higher
energy bills for air-conditioned kitchens.
• Cut down on spillage by adding inexpensive side panels to hoods.
• Push each cooking appliance as far back against the wall as
possible to maximize hood overhang and close the air gap
between the appliance and the wall.
• Install a demand-based exhaust control. It uses sensors to
monitor your cooking and varies the exhaust fan speed to
match your ventilation needs. Demand ventilation controls
could reduce your exhaust system costs by anywhere from
30 to 50 percent and can either be installed on new equipment
or retrofitted to existing hoods.
ENERGY STAR qualified HVAC equipment can save:
• $1.60 per square foot over the life of the HVAC
equipment ($4,000 for a 2,500 square foot restaurant;
or $330 annually over a 12-year life)
• $17 annually for electricity costs per ceiling fan
• $75 annually for electricity costs for ventilating fans
that run continuously (e.g., bath fans)
Learning More About Kitchen Ventilation
If you're getting ready to design a new kitchen or renovate an
old one, check out "Improving Commercial Kitchen Ventilation
System Performance," a two-part kitchen ventilation design
guide written by the experts at PG&E FSTC and available at
www.fishnick.com/ventilation/designguides.
Windows
Applying a clear, heat-rejecting window film will help cut your
cooling costs while making your dining room more comfortable.
Use only high quality window film installed by a qualified
professional.
Patio Heaters
The best approach to saving money with patio heaters is to cut
back their use—both for hours of operation and for the number of
patio heaters running at any given time. Patio heaters are radiant
devices that heat up quickly so there is no reason to leave them
running if a seating area is temporarily empty.
Good practices can save:
$530 per heater annually by cutting three hours of use per day
-------
WATER AND WASTE MANAGEMENT
Water Use
Using water more efficiently
preserves water supplies,
saves money, and protects the
environment. By conserving
hot water you trim not one but
two bills: one for the water
and sewer and another for
the electricity or natural gas
required to heat the water used
in bathroom faucets, kitchen
sinks, and dishwashers.
Cost-Saving Tips
> Look for the ENERGY STAR
and WaterSense label
> Add aerators
> Install WaterSense labeled
toilets
> Repair leaks
> Reduce sink and tap usage
Similar to the ENERGY STAR, the WaterSense®
label identifies water-efficient products and
programs. WaterSense is a partnership program
sponsored by EPA and additional information is
available at: www.epa.gov/watersense.
Good practices can save:
$1,000 annually by turning down dipper wells and making
sure they are OFF when the kitchen is closed
$1,000 annually by fixing leaks in sinks, mop-stations, and
dish machines
Look for WaterSense labeled equipment and use
WaterSense irrigation partners to landscape your
restaurant:
Bathroom faucets are 30 percent more water efficient
Landscaping with WaterSense irrigation partner could save
you 15 percent compared to average watering bills
High-Efficiency Pre-Rinse Spray Valves
A high-efficiency, or low-flow, pre-rinse spray valve is one of the
most cost-effective energy-saving
devices available to the foodservice
operator. And it is easy to install! Just
unscrew your old spray valve and screw in
your new, water-efficient one.
In addition to minimizing hot water consumption,
you can reduce both your water-heating and sewer
expenditures per month. How? Typical spray valves can release
hot water at a rate of three to four gallons of water per minute
(gpm), while common high-efficiency units spray only 1.6 gpm or
less without sacrificing cleaning power!
Installing a 1.6 gpm spray valve can save:
$300 to $350 annually for water, sewer, and natural
gas costs (used one hour a day and compared to a
3 gpm sprayer)
Additional information is available at: www.fishnick.com/equipment/sprayvalves.
-------
Dishwashers
From an operational standpoint, dishwashers are one of the
most expensive pieces of equipment in your kitchen. Commercial
dishwashers that have earned the ENERGY STAR are on average
25 percent more energy and water efficient than standard models.
• Run fully loaded dish racks through the dish machine. Cutting
wash cycles could save you hundreds of dollars annually.
• Pay attention to your dishwasher's pressure gauge—if it's
showing pressure above 25 psi, there is a good chance you are
using much more water than is necessary. Most dishwashers
require only around 20 psi.
• If you have a conveyor-style dishwasher, make sure you are
using it in auto mode, which saves electricity by running the
conveyor motor only when needed.
Cost-Saving Tips
> Look for the ENERGY STAR
> Turn off at night
> Replace torn wash
curtains
> Repair leaks
> Replace worn spray heads
•*-VJ*.66lL
M<
VMVSTE
„ WISE
ENERGY STAR qualified commercial dishwashers
can save:
• $720 for electricity annually
• $300 for water annually
Waste Reduction Is Good Business
Waste reduction leads to increased operating
efficiency and cost savings. Decreased solid
waste generation reduces collection and disposal
costs just as reducing electricity and water
consumption reduces utility bills. Waste minimization also
may reduce your purchasing costs for restaurant supplies.
Using recycling and composting bins, sustainable take-out
containers, and "green" signage are all excellent ways to announce
and to demonstrate to your customers your efforts to be more
environmentally sustainable and aware.
For help identifying waste reduction opportunities please visit
www.epa.gov/wastewise.
BEGIN THE PROCESS, LEARN MORE, AND SAVE!
The best first step in improving energy efficiency in your
restaurant is to perform an energy audit on your facility.
Energy service providers (utilities), state energy offices, and
private sector product and service providers can assist you in
identifying a trained professional to conduct your audit. However,
comprehensive, affordable energy audits for commercial food
service businesses are not available everywhere in the country.
To help address the lack of energy audits in many communities,
ENERGY STAR provides free online tools and information to
achieve energy savings. ENERGY STAR'S basic guidance for self-
assessments is part of the Guidelines for Energy Management,
"Step 2: Assess Performance," at: www.energystar.gov/guidelines.
In addition, ENERGY STAR'S Portfolio Manager tool is designed
to help businesses "benchmark" and track energy use, costs, and
greenhouse gas emissions. Portfolio Manager also offers the option
to track water use and renewable energy credits—all in a password-
protected online user account. Portfolio Manager users can track
individual facilities or track across an entire building portfolio.
Your restaurant can generate a Statement of Energy Performance
that includes a "weather-normalized" kBtu/ft2 energy use intensity
calculation, associated greenhouse gas emissions, and a national
average for similar building types. Access to the tool and free
online training in the use of Portfolio Manager is available at: www.
energystar.gov/benchmark.
Once you have identified the areas of potential energy savings,
decide which energy efficiency upgrades you want to install and
what practices to initiate. If your finances and operating schedule
make it impractical to perform all of the upgrades at once, you can
take a staged approached and install them as time and money allow.
Remember, having your restaurant manager 100 percent on
board is absolutely key to saving your restaurant money and
protecting the environment! Your best-laid energy-saving plans are
only as good as the staff that is implementing them!
-------
For more information, please consult the following online resources:
• ENERGY STAR Commercial Food Service: www.energystar.gov/cfs
• ENERGY STAR Restaurants: www.energystar.gov/restaurants
• ENERGY STAR Portfolio Manager: www.energystar.gov/benchmark
• PG&E Food Service Technology Center: www.fishnick.com
• National Restaurant Association Conserve: http://conserve.restaurant.org
• EPA WaterSense: www.epa.gov/watersense
• EPA WasteWise: www.epa.gov/wastewise
Find Monetary Incentives
Access the ENERGY STAR CFS
Incentive Finder and CFS Incentive
Guide at www.energystar.gov/cfs/
incentives.
-------
January 2012
EPA 430-R-09-030
For more information visit www.energystar.gov/cfs
Food Service
Technology Center 1
Promoting Energy Efficiency In Food Service
____._&!
ASSOCIATION.
'on
SUSTAINABILITY EDUCATION PROGRAM
LEARN MORE AT
energystar.gov
------- |