Toxics Release Inventory (TRI)
State File Documentation for RY 2000
Prepared by: Environmental Protection Agency
Office of Environmental Information
Office of Information Analysis and Access
Toxics Release Inventory Program Division
I I Information and Outreach Branch
Date: April 3, 2002
-------
Table of Contents
1.0 Overview 1
2.0 Noted Changes from the Previous Year's (RY 1999)
State Data Files 2
2.1 The addition of Dioxin and Dioxin-like Compouds 2
2.2 Two New Fields from Part I of the Reporting Forms 2
2.3 One New Field and One Renamed Field in the Chemical Activities
and Uses section 3
2.4 Other changes to the State Data Files 3
2.5 Mapping the Form R/A Sections to each File 5
3.0 Field Descriptions 6
3.1 Facility, Chemical, Releases and Other Waste Management Summary
Information Record (Type 1) 7
3.2 Detailed Source Reduction Activities and Methods (Type 2A) 55
3.3 Detailed Waste Management (Type 2B) 77
3.4 Detailed Transfers Off-Site Data (non-POTW) (Type 3A) 100
3.5 Detailed Transfers Off-Site Data (POTWs) (Type 3B) 141
3.6 Facility Information Directory (Type 4) 154
-------
1.0 Overview
The Toxics Release Inventory (TRI) State Data Files are a set of six files that collectively contain
all the data that was submitted on the Toxic Chemical Release Inventory Reporting Forms (Form
R and Form A) by facilities located in a selected state. The data has been extracted from the
Envirofacts database system. The six files and their contents are as follows:
File
Description of Contents
Type 1
Facility, Chemical, Releases and Other Waste
Management Summary Information
Type 2A
Detailed Source Reduction Activities and Methods
Type 2B
Detailed Waste Management
Type 3A
Details of Transfers Off-Site
Type 3B
Details of Transfers to Publicly Owned Treatment
Works (POTW)
Type 4
Facility Information Directory
These files are identified (named) by state and file type. File VA_l.txt", for example is the
Facility, Chemical, Releases and Other Waste Management Summary Information (File Type 1)
for all facilities located in Virginia (VA).
In addition to a file sets for each state, there are also 2 more file sets. There is a Federal file set
(FEDl.txt, FED2.txt, etc.) which contains data on all government owned, contractor operated and
federal sites. There is also a set of files that represents the whole database (all states). The files
in this set are named USl.txt, US2A.txt, etc.
1
-------
2.0 Noted Changes from the Previous Year's (RY 1999) State Data
Files
For Reporting Year 2000, a number of changes have occurred to the State Data Files. This
section will highlight the those changes. New or altered fields in the subsequent record layouts
are identified by a gray background shading. The changes to the RY 2000 State Data Files
include the addition of Dioxin and Dioxin-like Compounds and supporting fields, a GOCO
indicator, expanded address capacity in the form of a province field and the new Process as an
impurity indicator. The following sections will highlight these changes.
2.1 The addition of Dioxin and Dioxin-like Compounds
For reporting year 2000, facilities were required to report the release of Dioxins and Dioxin-like
Compounds. This resulted in a number of data items being added to the Toxics Release
Inventory Reporting Forms A and R. Section 1.4 of Part II was added to the forms to facilitate
the reporting of these new chemicals. The new section includes 17 data fields (and one "Non-
Applicable" check box) so that facilities could specify the distribution of chemicals within the
Dioxin or Dioxin-like Compound being reported.
For reporting year 2000, data fields were added to state data files 1, 2A, 2B, 3A and 3B to
represent the values of the dioxin or dioxin-like compounds that were added to the forms. These
values are represent under the names "Dioxin Distribution 1", "Dioxin Distribution 2"...
"Dioxin Distribution 17" in 5 state data files mentioned above. Besides the distribution values,
dioxins and dioxin-like compounds caused the addition of 2 more fields to the state data files.
Dioxin and dioxin-like compounds are reported in grams. This deviates from the past when all
chemicals were reported in "pounds" only. Because there are now 2 units of measure for
reporting different TRI chemicals, a new field, called "Units of Measure", was added to the state
data files to identify which scale is being used. This field has been added to state data files 1,
2A, 2B, 3A and 3B.
A new categorization field was added to the state data files also. It's called "Classification" and
will be used to identify which general category a chemical belongs to. TRI chemicals can be
classified as either a Dioxin or Dioxin-Like compound (Dioxin), a Persistent Bioaccumulative
and Toxic (PBT) chemical or a general EPCRA Section 313 chemical (TRI). This field will
contain one of 3 values {Dioxin, PBT or TRI} to respectively represent the a fore mentioned
categories.
2.2 Two New Fields from Part I of the Reporting Forms
In part I, section 4.2 of the TRI reporting form R and A, a new check box was added to further
identify a facility. The "GOCO" check box was added to clearly indicate if a facility is a
2
-------
Government Owned, Contractor Operated (GOCO) facility. In conjunction with the Federal
Facility check box, a clear determination can be made as a whether a facility is a GOCO facility,
a pure federal facility or neither. On the State Data Files, the "GOCO Facility Ind" field has
been added to represent whether a facility is a GOCO facility or not. It can be found in all the
state data files near the other Part I, section 4.2 fields... "Entire Facility Ind", "Partial Facility
Ind" and "Federal Facility Ind".
A new field was also added to the state data files to more accurately represent the mailing
address of a facility if it is outside of the United States. The "Mailing Province" field was added
to state data files 1 and 4 to represent the province of a facility's mailing address. In addition, in
state data file 3 A, the "Off-Site Province" field serves the same purpose for off-site transfer
locations (if they are outside of the United States).
2.3 One New Field and One Renamed Field in the Chemical Activities and Uses section
A new data item was added to Part n, Section 3.2 of the Form R. In this section, the "Process the
Toxic Chemical" section, the "As an Impurity" field was added. This is reflected in the state
data files in the new field entitled "As a Process Impurity".
In last year's state data file, there was a field called "As an Impurity". It indicated whether the
chemical was produced or imported at the facility as an impurity. This field originates from the
Part II, 3.1 section entitled "Manufacture the Toxic chemical". To clarify what this field
represents and to not confuse it with the newly added "As a Process Impurity" field, it was
renamed in RY 2000 to "As a Manufactured Impurity" in this year's State Data Files.
2.4 Other changes to the State Data Files
Besides the addition of the 21 new fields and the renaming of another, there are a few more
changes that were made to the state data files. First, the delimiter in the files has been changed
from a comma (with quotation marks as string qualifiers) to a tilde ('-'). This was done because
several facility names already contained commas as well as quotation marks. Using the old
delimiter pattern caused inaccuracies in the data.
Another thing to be aware of in the reporting year 2000 State Data Files in the precision of all
quantity values. In the past chemical quantities for release, transfer or source reduction were
measured in only whole numbers. Now, with the advent of the dioxins and the additional
reporting accuracy of PBT chemicals, numbers with up to seven decimal places will be used to
represent quantities. PBT chemicals will be expressed with an accuracy of .1 pounds. Dioxins
and Dioxin-like compounds are measured in grams and can be represented with up to seven
decimal places.
Finally, the "Detailed Waste Management and Source Reduction Activities" file (file number 2
from Reporting Year 1999) has been split into 2 separate files for reporting year 2000. The first
3
-------
will contain only Form R section 8 information. This file will known as File "2A" and will be
entitled "Detailed Source Reduction Activities and Methods" The second new file, as a result of
the split, will contain only Form R section 7A data. This will be file "2B" and will be entitled
"Detailed Waste Management".
4
-------
2.5 Mapping the Form R/A Sections to each File
Part I
Part II
1
2
3
4
5
1
2
3
4
5
6.1 .A
6.1.B
6.2
6.2ab
c
7A
7B
7C
8
Total
Fields
File 1
*
*
*
*
*
*
*
*
*
*
*
*
*
P1
206
File 2A
*
P2
*
*
*
*
115
File 2B
*
P2
*
*
*
113
File 3A
*
*
*
*
*
*
159
File 3B
*
*
*
*
*
*
66
File 4
*
*
*
*
42
PI- Section 8, these specific cells (8.2.B, 8.4.B, 8.6.B)
These cells are Current Year Energy Recover, Recycled and
Treated on-site quantities
P2 - Only 2.1. Trade Secret Indicator
Part & Section Definitions
Part Section
1
2
3
4
~
1
2
3
4
5
6.1.A
6.1.B
6.2
6.2abc
7A
7B
7C
Definition
Reporting Year
Trade Secret
Certification
Facility Identification
Parent Company Info
Toxic Chemical Identity
Mixture Component Identity
Activities and Uses of the Toxic Chemical at the Facility
Maximum Amount of Chemical On-site at any time during the Calendar Year
Quantity of the Toxic Chemical Entering each Environmental Medium Onsite
Discharges to Publicly Owned Treatment Works (POTWs) - Total Transfer Quantity
Discharges to Publicly Owned Treatment Works (POTWs) - POTW name and location
Transfers to other Off-Site Locations - Name an location of Transfer site
Transfers to other Off-Site Locations - Total Transfer Quantities, Est.Basis, Type of
Treatment/Disposal
On-Site Waste Treatment Methods and Efficiency
On-Site Energy Recovery Processes
On-Site Recycling Processes
Source Reduction and Recycling Activities
5
-------
3.0 Field Descriptions
The following sections contain the record structure for each of the Toxics Release Inventory
(TRI) State Files. The codes and definitions used in the following record descriptions are listed
in the Toxic Chemical Release Inventory Reporting Forms and Instructions booklet.
The record descriptions in each of the following sections contain the following columns and
information:
$ Number - the sequential number of the data element in the record
$ Field Name - the TRI System field name of the data element
$ Data Type - AC> for character data (alphanumeric); AN@ for numeric data; and AD@
for date
$ Description - a brief statement of what the data element represents along with its
TRI System Source (in Table Name.Field Name format) and the Form R
reference
The data contained in each of the five files are tilde ('-') delimited (a tilde is placed between
each data element).
The first record (row) of each file contains the field names for that file type.
6
-------
3.1 Facility, Chemical, Releases and Other Waste Management Summary Information
Record (Type 1)
Num.
Field Name
Type
Description
1
FORM TYPE
C
An indicator identifying whether Form R or
Certification Statement was submitted.
R = Long Form (Form R)
A = Short Form (Form A, Certification
Statement.)
Source: TRI REPORTING FORM.
FORM TYPE IND
Reference: Type of Form Used
2
REPORTING YEAR
C
The calendar year in which the reported
activities occur.
Source: TRI REPORTING FORM.
REPORTING YEAR
Reference: Part I, Section 1
3
TRADE SECRET
INDICATOR
C
Indicates whether the reporting facility claims
the identity of the chemical or chemical
category as a trade secret.
Yes = Checked (Trade Secret)
No = Not checked
Note: Only Sanitized Trade Secret submissions
are stored in the TRIS database.
Source: TRI REPORTING FORM.
TRADE SECRET IND
Reference: Part I, Section 2.1
4
SANITIZED INDICATOR
C
Indicates whether the reporting facility has
sanitized trade secret information.
Yes = Checked (form
information sanitized)
No = Not checked
Source: TRI REPORTING FORM.
SANITIZED IND
Reference: Part I, Section 2.2
5
TITLE OF CERTIFYING
OFFICIAL
C
The corporate title of the senior official
certifying the accuracy and completeness of
information on the submission.
Source: TRI REPORTING FORM.
CERTIF OFFICIAL TITLE
Reference: Part I, Section 3
7
-------
Num.
Field Name
Type
Description
6
NAME OF CERTIFYING
OFFICIAL
C
The name of the senior official certifying the
accuracy and completeness of the information
on the submission.
Source: TRI REPORTING FORM.
CERTIF NAME
Reference: Part I, Section 3
7
CERTIFYING OFFICIALS
SIGNATURE INDICATOR
C
Indicates whether the certifying signature is
provided. Possible values are:
Original = original signature
Photocopy = photocopy of signature
No Signature = no signature
NA = not applicable- magnetic media
submission
Source: TRI REPORTING FORM.
CERTIF SIGNATURE
Reference: Part I, Section 3
8
DATE SIGNED
D
The date of the certifying signature. The
format is YYYY-MM-DD.
Source: TRI REPORTING FORM.
CERTIF DATE SIGNED
Reference: Part I, Section 3
9
TRIFID
C
Facility identification in the format zzzzz-
nnnnn-sssss where usually zzzzz = facility zip
code, nnnnn = first five consonants of the
name, and sssss = first five non-special
characters in the street address.
NOTE: The content of this field is not
changed to match facility ownership, or zip
code changes. Rather, the TRI Facility ID
identifies a specific geographical location
which is also identified by the latitude and
longitude of that location.
Source: TRI FACILITY.
TRI FACILITY ID
Reference: Part I, Section 4.1
10
FACILITY NAME
C
Name of the reporting facility.
Source: TRI FACILITY.FACILITY NAME
Reference: Part I, Section 4.1
8
-------
Num.
Field Name
Type
Description
11
FACILITY STREET
C
Street address of the reporting facility.
Source:
TRIFACILITY.STREETADDRESS
Reference: Part I, Section 4.1
12
FACILITY CITY
C
City in which the reporting facility is located.
Source: TRI FACILITY.CITY NAME
Reference: Parti, Section 4.1
13
FACILITY COUNTY
C
County in which the reporting facility is
located.
Source: TRI FACILITY.COUNTY NAME
Reference: Part I, Section 4.1
14
FACILITY STATE
C
Two-letter state code of the reporting facility.
Source: TRIFACILITY.STATEABBR
Reference: Part I, Section 4.1
15
FACILITY ZIP CODE
C
ZIP code of the reporting facility.
Source: TRIFACILITY. ZIP CODE
Reference: Part I, Section 4.1
16
MAILING NAME
C
The first and second lines of the mailing name
for the facility.
Source: TRIFACILITY.MAILNAME
17
MAILING STREET
C
Street address of the reporting facility s
mailing address.
Source: TRI FACILITY.
MAIL STREET ADDRES S
Reference: Part I, Section 4.1
18
MAILING CITY
C
City name provided by the reporting facility to
which mail is to be sent
Source: TRI FACILITY.MAIL CITY
Reference: Part I, Section 4.1
19
MAILING STATE
C
State of the reporting facility s mailing
address.
Source:
TRI FACILITY.MAIL STATE ABBR
Reference: Part I, Section 4.1
9
-------
Num.
Field Name
Type
Description
20
MAILING PROVINCE
C
Province of the reporting facility's mailing
address.
Source: TRI FACILITY.MAIL PROVINCE
Reference: Part I, Section 4.1
21
MAILING ZIP CODE
C
Zip code of the reporting facility s mailing
address.
Source: TRI FACILITY.MAIL ZIP CODE
Reference: Part I, Section 4.1
22
ENTIRE FACILITY IND
C
Indicates whether the information covers an
entire facility or part of a facility.
Yes = entire
No = partial
Source:
TRIREPORTINGFORM.ENTIREFAC
Reference: Part I, Section 4.2a
23
PARTIAL FACILITY IND
C
Indicates whether the information covers an
entire facility or part of a facility:
Yes = partial
No = entire
Source:
TRIREPORTINGFORM.PARTIALFAC
Reference: Part I, Section 4.2b
24
FEDERAL FACILITY IND
C
Code indicating whether a facility is Federal or
not:
Yes = Federal
No = non-Federal
Source:
TRI REPORTING FORM.FEDERAL
FAC IND
Form R: Part I Section 4.2c
25
GOCO FACILITY IND
C
Code indicating whether a facility is GOCO
(Government-Owned, Contractor-Operated)
facility or not:
Yes = GOCO
No = non-GOCO
Source: TRI REPORTING FORM.GOCO
FLAG
Form R: Part I Section 4.2d
10
-------
Num.
Field Name
Type
Description
26
PUBLIC CONTACT
NAME
C
Name of the individual whom the public may
contact if clarification of data is needed.
Source:
TRI REPORTING FORM.PUBLIC
CONTACT PERSON
Reference: Part I, Section 4.4
27
PUBLIC CONTACT PHONE
C
Area code and telephone number of the public
contact.
Source:
TRI REPORTING FORM.PUBLIC
CONTACT PHONE
Reference: Part I, Section 4.4
28
PRIMARY SIC CODE
C
Primary four-digit Standard Industrial
Classification (SIC) Code.
Source:
TRISUBMISSIONSIC.SICCODE
Where: primary ind = >l'
Reference: Part I, Section 4.5a
29
SIC CODE 2
C
Second four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Where: sic sequence num = >2'
Reference: Part I, Section 4.5b
30
SIC CODE 3
C
Third four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Where: sic sequence num = >3'
Reference: Part I, Section 4.5c
31
SIC CODE 4
C
Fourth four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Where: sic sequence num = >4'
Reference: Part I, Section 4.5d
11
-------
Num.
Field Name
Type
Description
32
SIC CODE 5
C
Fifth four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Where: sic sequence num = >5'
Reference: Part I, Section 4.5e
33
SIC CODE 6
C
Sixth four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Where: sic sequence num = >6'
Reference: Part I, Section 4.5f
34
LATITUDE
N
Reported latitude of the reporting facility
converted into decimal degrees (Format:
signed 2 digit whole number, 6 digit decimal
positions +nn nnnnnn)
Source: TRI FACILITY.FAC LATITUDE
Reference: Part I, Section 4.6
35
LONGITUDE
N
Reported longitude of the reporting facility
converted into decimal degrees. (Format:
signed 3 digit whole number, 6 digit decimal
positions +nnn.nnnnnn).
Source: TRI FACILITY.LONGITUDE
Reference: Part I, Section 4.6
36
D&BNRA
C
Unique identification number assigned by Dun
and Bradstreet to the reporting facility.
Source: TRI FACILITY DB.DB NUM
Reference: Part I, Section 4.7a
37
D&B NR B
C
Unique identification number assigned by Dun
and Bradstreet to the reporting facility.
Source: TRI FACILITY DB.DB NUM
Reference: Part I, Section 4.7b
38
RCRA NR A
c
Twelve-digit alphanumeric identifier assigned
by EPA under the resource Conservation and
Recovery Act.
Source:
TRI FACILITY RCRA.RCRA NUM
Reference: Part I, Section 4.8a
12
-------
Num.
Field Name
Type
Description
39
RCRA NR B
C
Twelve-digit alphanumeric identifier assigned
by EPA under the resource Conservation and
Recovery Act.
Source:
TRI FACILITY RCRA.RCRA NUM
Reference: Part I, Section 4.8b
40
NPDES NR A
C
Nine-digit alphanumeric identifier assigned to a
facility under EPA's National Pollutant
Discharge Elimination System.
Source:
TRI FACILITY NPDES.NPDES NUM
Reference: Part I, Section 4.9a
41
NPDES NR B
C
Nine-digit alphanumeric identifier assigned to a
facility under EPA's National Pollutant
Discharge Elimination System.
Source:
TRI FACILITY NPDES.NPDES NUM
Reference: Part I, Section 4.9b
42
UIC NR A
C
Underground injection identification number,
assigned by EPA or the state, to a facility
which injects chemical waste into class I wells.
Source: TRI FACILITY UIC.UIC NUM
Reference: Part I, Section 4.10a
43
UIC NR B
C
Underground injection identification number,
assigned by EPA or the state, to a facility
which injects chemical waste into class II to V
wells.
Source: TRI_FACILITY_UIC.UIC_NUM
Reference: Part I, Section 4.10b
44
PARENT COMPANY
NAME
C
Name of the corporation or other business
entity that owns or controls the reporting
facility.
Source: TRI FACILITY.PARENT CO
NAME
Reference: Part I, Section 5.1
13
-------
Num.
Field Name
Type
Description
45
PARENT COMPANY D&B
NR
C
Unique identification number assigned by Dun
and Bradstreet to the parent company of the
reporting facility.
Source:
TRI FACILITY.PARENTCO DB NUM
Reference: Part I, Section 5.2
46
DOCUMENT CONTROL
NUMBER
C
Unique identification number assigned to each
submission by EPA. Format:
TTYYMMMNNNNNC, where
TT = document type
YY = reporting year
MMM = document type
NNNNN= sequential number
C = check digit
Source:
TRI REPORTING FORM.DOC CTRL
NUM
Format: (13 + RY + DOC TYPE +
SEQ_NUM + Check digit)
Reference: NA (System generated)
47
CAS NUMBER
C
Chemical Abstracts Service (CAS) Registry
Number for that unique chemical, or category
code (for compounds).
NOTE: CAS number 999999999 is for
sanitized trade secret submissions;
CHEM NAME displays the reported generic
chemical name.
Source:
TRI REPORTING_FORM.TRI CHEM ID
Reference: Part II, Section 1.1
48
CHEMICAL NAME
Name of the chemical or generic name if the
chemical is claimed as a trade secret.
Source:
TRI REPORTING FORM.CAS CHEM
NAME
Reference: Part II, Section 1.2 or Part II,
Section 1.3
14
-------
Num.
Field Name
Type
Description
49
CLASSIFICATION
C
Indicates the classification of the chemical.
Chemicals can be classified as either a Dioxin
or Dioxin-like compound, a PBT (Persistent,
Bioaccumulative and Toxic) chemical or a
general EPCRA Section 313 chemical.
Values: {TRI, PBT, DIOXIN} where
TRI = General EPCRA Section 313 Chem.
PBT = Bioaccumulative and Toxic
DIOXIN = Dioxin or Dioxin-like compound
Source: TRI CHEM INFO.
CLASSIFICATION
Reference: NONE
50
UNIT OF MEASURE
C
Indicates the unit of measure used to quantify
the chemical. Values: {Pounds, Grams}
Source: TRI CHEM INFO.
UNIT OF MEASURE
Reference: NONE
51
DIOXIN DISTRIBUTION 1
N
Indicates the percentage of
1,2,3,4,6,7,8 Heptachlorodibenzofuran
(CAS # 67562-39-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 1
Reference: Part II, Section 1.4
52
DIOXIN DISTRIBUTION 2
N
Indicates the percentage of
1,2,3,4,7,8,9 Heptachlorodibenzofuran
(CAS # 55673-89-7) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 2
Reference: Part II, Section 1.4
15
-------
Num.
Field Name
Type
Description
53
DIOXIN DISTRIBUTION 3
N
Indicates the percentage of
1,2,3,4,7,8 Hexachlorodibenzofuran
(CAS # 70648-26-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 3
Reference: Part II, Section 1.4
54
DIOXIN DISTRIBUTION 4
N
Indicates the percentage of
1,2,3,6,7,8 Hexachlorodibenzofuran
(CAS # 57117-44-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 4
Reference: Part II, Section 1.4
55
DIOXIN DISTRIBUTION 5
N
Indicates the percentage of
1,2,3,7,8,9 Hexachlorodibenzofuran
(CAS # 72918-21-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 5
Reference: Part II, Section 1.4
56
DIOXIN DISTRIBUTION 6
N
Indicates the percentage of
2,3,4,6,7,8 Hexachlorodibenzofuran
(CAS # 60851-34-5) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 6
Reference: Part II, Section 1.4
16
-------
Num.
Field Name
Type
Description
57
DIOXIN DISTRIBUTION 7
N
Indicates the percentage of
1,2,3,4,7,8 Hexachlorodibenzo- p-dioxin
(CAS # 39227-28-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 7
Reference: Part II, Section 1.4
58
DIOXIN DISTRIBUTION 8
N
Indicates the percentage of
1,2,3,6,7,8 Hexachlorodibenzo- p-dioxin
(CAS # 5765385-7) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 8
Reference: Part II, Section 1.4
59
DIOXIN DISTRIBUTION 9
N
Indicates the percentage of
1,2,3,7,8,9 Hexachlorodibenzo- p-dioxin
(CAS # 19408-74-3) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 9
Reference: Part II, Section 1.4
60
DIOXIN DISTRIBUTION 10
N
Indicates the percentage of
1,2,3,4,6,7,8 Heptachlorodibenzo- p-dioxin
(CAS # 35822-46-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 10
Reference: Part II, Section 1.4
17
-------
Num.
Field Name
Type
Description
61
DIOXIN DISTRIBUTION 11
N
Indicates the percentage of
1,2,3,4,6,7,8,9 Octachlorodibenzofuran
(CAS # 39001-02-0) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 11
Reference: Part II, Section 1.4
62
DIOXIN DISTRIBUTION 12
N
Indicates the percentage of
1,2,3,4,6,7,8,9 Octachlorodibenzo- p-dioxin
(CAS # 03268-87-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 12
Reference: Part II, Section 1.4
63
DIOXIN DISTRIBUTION 13
N
Indicates the percentage of
1,2,3,7,8 Pentachlorodibenzofuran
(CAS # 57117-41-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 13
Reference: Part II, Section 1.4
64
DIOXIN DISTRIBUTION 14
N
Indicates the percentage of
2,3,4,7,8 Pentachlorodibenzofuran
(CAS # 57117-31-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 14
Reference: Part II, Section 1.4
18
-------
Num.
Field Name
Type
Description
65
DIOXIN DISTRIBUTION 15
N
Indicates the percentage of
1,2,3,7,8 Pentachlorodibenzo- p-dioxin
(CAS # 40321-76-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 15
Reference: Part II, Section 1.4
66
DIOXIN DISTRIBUTION 16
N
Indicates the percentage of
2,3,7,8 Tetrachlorodibenzofuran
(CAS # 51207-31-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 16
Reference: Part II, Section 1.4
67
DIOXIN DISTRIBUTION 17
N
Indicates the percentage of
2,3,78 Tetrachlorodibenzo- p-dioxin
(CAS # 01746-01-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM.
DIOXIN DISTRIBUTION 17
Reference: Part II, Section 1.4
68
PRODUCE THE
CHEMICAL
C
Indicates whether the chemical is produced at
this facility.
Yes = produced here
No = not produced here
Source:
TRI CHEM ACTIVITY.PRODUCE
Reference: Part II, Section 3.1a
69
IMPORT THE CHEMICAL
C
Indicates whether the chemical is imported at
this facility.
Yes = imported
No = not imported
Source:
TRI CHEM ACTIVITY.IMPORTED
Reference: Part II, Section 3.1b
19
-------
Num.
Field Name
Type
Description
70
ON-SITE USE
C
Indicates whether the chemical is produced or
imported for on-site use at this facility.
Yes = on-site use
No = not used on-site
Source: TRI CHEM ACTIVITY.USED
PROCESSED
Reference: Part II, Section 3.1c
71
SALE OR DISTRIBUTION
C
Indicates whether the chemical is produced or
imported at this facility for sale or distribution.
Yes = imported for sale
No = not imported for sale
Source: TRI CHEM ACTIVITY.SALE
DISTRIBUTION
Reference: Part II, Section 3.Id
72
AS A BYPRODUCT
C
Indicates whether the chemical is produced or
imported at this facility as a byproduct.
Yes = byproduct
No = not byproduct
Source:
TRI CHEM ACTIVITY.BYPRODUCT
Reference: Part II, Section 3.1e
73
AS A MANUFACTURED
IMPURITY
C
Indicates whether the chemical is produced or
imported at this facility as an impurity.
Formerly know as "AS AN IMPURITY" in
RY 1999
Yes = impurity
No = not impurity
Source: TRI CHEM ACTIVITY.
MANUFACTURE IMPURITY
Reference: Part II, Section 3.If
74
AS A REACTANT
C
Indicates whether the chemical is at this facility
as a reactant.
Yes = reactant
No = not reactant
Source:
TRI CHEM ACTIVITY.REACTANT
Reference: Part II, Section 3.2a
20
-------
Num.
Field Name
Type
Description
75
AS A FORMULATION
COMPONENT
C
Indicates whether the facility adds the reported
chemical to a product or product mixture prior
to further distribution of that product to act as a
performance enhancer during the use of the
product. Includes, but not limited to, additives,
dyes, reaction diluents, initiators, solvents,
inhibitors, emulsifiers, surfactants, lubricants,
flame retardents, and rheological modifiers.
Yes = formulation component
No = not formulation
component
Source:
TRI CHEM ACTIVITY.FORMULATION
COMPONENT
Reference: Part II, Section 3.2b
76
AS AN ARTICLE
COMPONENT
C
Indicates whether the facility uses the reported
chemical as an integral component of an article
distributed for industrial, trade, or consumer
use.
Yes = integral component
No = not integral component
Source:
TRI CHEM ACTIVITY.ARTICAL
COMPONENT
Reference: Part II, Section 3.2c
77
REPACKAGING
C
Indicates whether the chemical is processed at
this facility by repackaging for distribution in
commerce in a different form, state, or
quantity.
Yes = repackaged
No = not repackaged
Source:
TRI CHEM ACTIVITY.REPACKAGING
Reference: Part II, Section 3.2d
21
-------
Num.
Field Name
Type
Description
78
AS A PROCESS IMPURITY
C
Indicates whether the facility processed the
reported chemical but did not separate it and it
remains as an impurity in the primary the
mixture or trade name product.
Yes = Process Impurity
No = Not a Process Impurity
Source:
TRI CHEM ACTIVITY.PROCESS
IMPURITY
Reference: Part II, Section 3.2e
79
AS A CHEMICAL
PROCESSING AID
C
Indicates whether the chemical is used at this
facility as a chemical processing aid by adding
the reported chemical to a reaction mixture or
synthesis of another chemical substance,
without intending for it to remain as a part of
the mixture.
Yes = processing aid
No = not a processing aid
Source: TRI CHEM ACTIVITY.CHEM
PROCESSINGAID
Reference: Part II, Section 3.3a
80
AS A MANUFACTURING
AID
C
Indicates whether the chemical is used at this
facility to aid the manufacturing process,
without intending for it to become part of the
resulting product or the reaction mixture,
during the manufacture or synthesis of another
chemical substance.
Yes = manufacturing aid
No = not a manufacturing aid
Source:
TRI CHEM ACTIVITY.MANUFACTURE
AID
Reference: Part II, Section 3.3b
22
-------
Num.
Field Name
Type
Description
81
ANCILLARY OR OTHER
USE
C
Indicates whether the chemical is used at this
facility for purposes other than aiding chemical
processing or manufacturing. Includes, but not
limited to, cleaners, degreasers, lubricants,
fuels, and chemicals used for treating wastes.
Yes = for ancillary or other use
No = not for ancillary or other
use
Source:
TRI CHEMACTIVITY.ANCILLARY
Reference: Part II, Section 3.3c
82
MAXIMUM AMOUNT
ONSITE
C
This code indicates the maximum quantity of
the chemical at the facility at any time during
the calendar year. Includes sum of all on-site
locations within any reporting facility.
Source: TRI REPORTING FORM
MAX AMOUNT OF CHEM
Reference: Part II, Section 4.1
83
FUGITIVE AIR EMISSIONS
- TOTAL RELEASE
POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) released to the
environment from the reporting facility. Range
codes may be used for releases of less than
1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.1.A
84
FUGITIVE AIR EMISSIONS
- TOTAL RELEASE RANGE
CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.1.A
23
-------
Num.
Field Name
Type
Description
85
TOTAL FUGITIVE AIR
EMISSIONS
N
System generated total fugitive air emission in
pounds/year. If the field FUGITIVE AIR
EMISSIONS - TOTAL RELEASE POUNDS
(#83) is not blank, its contents are used as the
total. If it is blank, the middle of the range for
the code used in the field FUGITIVE AIR
EMISSIONS - TOTAL RELEASE RANGE
CODE (#84) is used for the total emission
value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
86
FUGITIVE OR NON-POINT
AIR EMISSIONS-BASIS
OF ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated:
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.1.B
87
STACK AIR EMISSIONS -
RELEASE POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) released to the
environment from the reporting facility. Range
codes may be used for releases of less than
1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.2.A
24
-------
Num.
Field Name
Type
Description
88
STACK AIR EMISSIONS -
RELEASE RANGE CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.2.A
89
TOTAL STACK AIR
EMISSIONS
N
System generated total stack air emission in
pounds/year. If the field STACK AIR
EMISSIONS - RELEASE POUNDS
(# 87) is not blank, its contents are used as the
total. If it is blank, the middle of the range for
the code used in the field STACK AIR
EMISSIONS - RELEASE RANGE CODE
(#88) is used for the total emission value.
Source :TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
90
STACK OR POINT AIR
EMISSIONS - BASIS OF
ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
O = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.2.B
25
-------
Num.
Field Name
Type
Description
91
TOTAL AIR EMISSIONS
N
System generated by adding the contents of the
TOTAL FUGITIVE AIR EMISSIONS (# 85)
and TOTAL STACK AIR EMISSIONS
(# 89).
Source: System generated
Reference: None
92
DISCHARGES TO STREAM
A - STREAM NAME
C
The name of the first receiving stream or water
body reported as it appears on the NPDES
permit for the facility.
Source:
TRI_WATER_STREAM.STREAM NAME
Reference: Part II, Section 5.3.1
93
DISCHARGES TO STREAM
A - RELEASE POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) released into the
stream or water body from the reporting
facility. Range codes may be used for releases
of less than 1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.3.1.A
94
DISCHARGES TO STREAM
A - RELEASE RANGE
CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.3.1.A
26
-------
Num.
Field Name
Type
Description
95
TOTAL DISCHARGES TO
STREAM A
N
System generated total release to the first
reported stream or water body in pounds/year.
If the field DISCHARGES TO STREAM A -
RELEASE POUNDS (# 93) is not blank, its
contents are used as the total. If it is blank, the
middle of the range for the code used in the
field DISCHARGES TO STREAM A -
RELEASE RANGE CODE (# 94) is used for
the total emission value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
96
DISCHARGES TO STREAM
A - BASIS OF ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.3.1.B
97
DISCHARGES TO STREAM
A - % FROM
STORMWATER
N
The percentage of the total quantity (by
weight) of the chemical released to water that
is contributed by storm water runoff. The
value is 0 through 100.
Source: TRI WATER STREAM.STORM
WATER PERCENT
Reference: Part II, Section 5.3.1.C
98
DISCHARGES TO STREAM
B - STREAM NAME
C
The name of the second receiving stream or
water body reported as it appears on the
NPDES permit for the facility.
Source:
TRI_WATER_STREAM.STREAM NAME
Reference: Part II, Section 5.3.2
27
-------
Num.
Field Name
Type
Description
99
DISCHARGES TO STREAM
B - RELEASE POUNDS
N
Provides an estimate of the total amount of
toxic chemical (in pounds/year) released into
the stream or water body from the reporting
facility. Range codes may be used for releases
of less than 1000 pounds. .
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.3.2.A
100
DISCHARGES TO STREAM
B - RELEASE RANGE
CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.3.2.A
101
TOTAL DISCHARGES TO
STREAM B
N
System generated total release to the second
reported stream or water body in pounds/year.
If the field DISCHARGES TO STREAM B -
RELEASE POUNDS (# 99) is not blank, its
contents are used as the total. If it is blank, the
middle of the range for the code used in the
field DISCHARGES TO STREAM B -
RELEASE RANGE CODE (# 100) is used for
the total emission value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
28
-------
Num.
Field Name
Type
Description
102
DISCHARGES TO STREAM
B - BASIS OF ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.3.2.B
103
DISCHARGES TO STREAM
B - % FROM
STORMWATER
N
The percentage of the total quantity (by
weight) of the chemical released to water that
is contributed by storm water runoff. The value
is 0 through 100.
Source: TRI WATER STREAM.STORM
WATER PERCENT
Reference: Part II, Section 5.3.2.C
104
DISCHARGES TO STREAM
C - STREAM NAME
C
The name of the third receiving stream or water
body reported as it appears on the NPDES
permit for the facility.
Source:
TRI_WATER_STREAM.STREAM NAME
Reference: Part II, Section 5.3.3
105
DISCHARGES TO STREAM
C - RELEASE POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) released into the
stream or water body from the reporting
facility. Range codes may be used for releases
of less than 1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.3.3.A
29
-------
Num.
Field Name
Type
Description
106
DISCHARGES TO STREAM
C - RELEASE RANGE
CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.3.3.A
107
TOTAL DISCHARGES TO
STREAM C
N
System generated total release to the third
reported stream or water body in pounds/year.
If the field DISCHARGES TO STREAM C -
RELEASE POUNDS (# 105) is not blank, its
contents are used as the total. If it is blank, the
middle of the range for the code used in the
field DISCHARGES TO STREAM C -
RELEASE RANGE CODE (# 106) is used for
the total emission value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
108
DISCHARGES TO STREAM
C - BASIS OF ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
O = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.3.3.B
30
-------
Num.
Field Name
Type
Description
109
DISCHARGES TO STREAM
C - % FROM
STORMWATER
N
Percentage of the total quantity (by weight) of
the chemical released to water that is
contributed by storm water runoff. The value
is 0 through 100.
Source: TRI WATER STREAM.STORM
WATER PERCENT
Reference: Part II, Section 5.3.3.C
110
DISCHARGES TO STREAM
D - STREAM NAME
C
Name of the fourth receiving stream or water
body reported as it appears on the NPDES
permit for the facility.
Source:
TRI WATER STREAM.STREAM NAME
Reference: Part II, Section 5.3 (continued)
111
DISCHARGES TO STREAM
D - RELEASE POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) released into the
stream or water body from the reporting
facility. Range codes may be used for releases
of less than 1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.3 (continued)
112
DISCHARGES TO STREAM
D - RELEASE RANGE
CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.3 (continued)
31
-------
Num.
Field Name
Type
Description
113
TOTAL DISCHARGES TO
STREAM D
N
System generated total release to the forth
reported stream or water body in pounds/year.
If the field DISCHARGES TO STREAM D -
RELEASE POUNDS (#111) is not blank, its
contents are used as the total. If it is blank, the
middle of the range for the code used in the
field DISCHARGES TO STREAM D -
RELEASE RANGE CODE (#112) is used for
the total emission value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
114
DISCHARGES TO STREAM
D - BASIS OF ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.3 (continued)
115
DISCHARGES TO STREAM
D - % FROM
STORMWATER
N
The percentage of the total quantity (by
weight) of the chemical released to water that
is contributed by storm water runoff. The value
is 0 through 100.
Source: TRI WATER STREAM.STORM
WATER PERCENT
Reference: Part II, Section 5.3 (continued)
116
DISCHARGES TO STREAM
E - STREAM NAME
C
The name of the fifth receiving stream or water
body reported as it appears on the NPDES
permit for the facility.
Source:
TRI_WATER_STREAM.STREAM NAME
Reference: Part II, Section 5.3 (continued)
32
-------
Num.
Field Name
Type
Description
117
DISCHARGES TO STREAM
E - RELEASE POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) released into the
stream or water body from the reporting
facility. Range codes may be used for releases
of less than 1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.3 (continued)
118
DISCHARGES TO STREAM
E - RELEASE RANGE
CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.3 (continued)
119
TOTAL DISCHARGES TO
STREAM E
N
System generated total release to the fifth
reported stream or water body in pounds/year.
If the field DISCHARGES TO STREAM D -
RELEASE POUNDS (#117) is not blank, its
contents are used as the total. If it is blank, the
middle of the range for the code used in the
field DISCHARGES TO STREAM D -
RELEASE RANGE CODE (#118) is used for
the total emission value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
33
-------
Num.
Field Name
Type
Description
120
DISCHARGES TO STREAM
E - BASIS OF ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.3 (continued)
121
DISCHARGES TO STREAM
E - % FROM
STORMWATER
N
Percentage of the total quantity (by weight) of
the chemical released to water that is
contributed by storm water runoff. The value
is 0 through 100.
Source: TRI WATER STREAM.STORM
WATER PERCENT
Reference: Part II, Section 5.3 (continued)
122
DISCHARGES TO STREAM
F - STREAM NAME
C
The name of the sixth receiving stream or water
body reported as it appears on the NPDES
permit for the facility.
Source:
TRI WATER STREAM.STREAM NAME
Reference: Part II, Section 5.3 (continued)
123
DISCHARGES TO STREAM
F - RELEASE POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) released into the
stream or water body from the reporting
facility. Range codes may be used for releases
of less than 1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.3 (continued)
34
-------
Num.
Field Name
Type
Description
124
DISCHARGES TO STREAM
F - RELEASE RANGE
CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.3 (continued)
125
TOTAL DISCHARGES TO
STREAM F
N
System generated total release to the sixth
reported stream or water body in pounds/year.
If the field DISCHARGES TO STREAM F -
RELEASE POUNDS (# 123) is not blank, its
contents are used as the total. If it is blank, the
middle of the range for the code used in the
field DISCHARGES TO STREAM D -
RELEASE RANGE CODE (# 124) is used for
the total emission value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
126
DISCHARGES TO STREAM
F - BASIS OF ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
O = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.3 (continued)
35
-------
Num.
Field Name
Type
Description
127
DISCHARGES TO STREAM
F - % FROM
STORMWATER
N
The percentage of the total quantity (by
weight) of the chemical released to water that
is contributed by storm water runoff. The
value is 0 through 100.
Source: TRI WATER STREAM.STORM
WATER PERCENT
Reference: Part II, Section 5.3 (continued)
128
TOTAL NUMBER OF
RECEIVING STREAMS
N
The total number of streams reported by the
facility as receiving toxic chemical releases.
Source: System generated
Reference: None
129
TOTAL SURFACE WATER
DISCHARGE
N
Total of all individual total stream release
fields. Sum of columns
(95+101+107+113+119+125).
Source: System generated
Reference: None
130
UGRND INJ ONSITE TO CL
I WELLS - RELEASE
POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) injected onsite to
Class I wells by the reporting facility. Range
codes may be used for releases of less than
1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.4.1 A
131
UGRND INJ ONSITE TO CL
I WELLS - RELEASE
RANGE CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.4.1 A
36
-------
Num.
Field Name
Type
Description
132
TOTAL UGRND INJ
ONSITE TO CLI WELLS -
POUNDS
N
System generated total Class I well injection in
pounds/year. If the field UGRND INJ ONSITE
TO CL I WELLS - RELEASE POUNDS
(#130) is not blank, its contents are used as the
total. If it is blank, the middle of the range for
the code used in the field UGRND INJ
ONSITE TO CL I WELLS - RELEASE
RANGE CODE (#131) is used for the total
emission value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
133
UGRND INJ ONSITE TO CL
I WELLS-BASIS OF
ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.4.IB
134
UGRND INJ ONSITE TO CL
II-V WELLS - RELEASE
POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) injected onsite to
Class II wells by the reporting facility. Range
codes may be used for releases of less than
1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.4.2.A
37
-------
Num.
Field Name
Type
Description
135
UGRND INJ ONSITE TO CL
II-V WELLS - RELEASE
RANGE CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.4.2A
136
TOTAL UGRND INJ
ONSITE TO CL II-V WELLS
- POUNDS
N
System generated total Class II-V well injection
in pounds/year. If the field UGRND INJ
ONSITE TO CL II-V WELLS - RELEASE
POUNDS (#134) is not blank, its contents are
used as the total. If it is blank, the middle of
the range for the code used in the field
UGRND INJ ONSITE TO CL II-V WELLS -
RELEASE RANGE CODE (#135) is used for
the total emission value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
137
UNGRND INJ ONSITE TO
CL II-V WELLS - BASIS OF
ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
O = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.4.2B
38
-------
Num.
Field Name
Type
Description
138
TOTAL UNDERGROUND
INJECTION
N
Total, in pounds, of both Class I and II well
injections for the facility (132 + 136). Source:
System generated
Reference: None
139
RCRA SUBTITLE C
LANDFILLS - RELEASE
POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) released to RCRA
Subtitle C landfills by the reporting facility.
Range codes may be used for releases of less
than 1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.5.1.AA
140
RCRA SUBTITLE C
LANDFILLS - RELEASE
RANGE CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.5.1.AA
39
-------
Num.
Field Name
Type
Description
141
TOTAL RCRA SUBTITLE C
LANDFILLS
N
System generated total RCRA Subtitle C
landfill release in pounds/year. If the field
RCRA SUBTITLE C LANDFILLS -
RELEASE POUNDS (# 139) is not blank, its
contents are used as the total. If it is blank, the
middle of the range for the code used in the
field RCRA SUBTITLE C LANDFILLS -
RELEASE RANGE CODE (#140) is used for
the total emission value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
142
RCRA SUBTITLE C
LANDFILLS - BASIS OF
ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.5.l.AB
143
OTHER LANDFILLS -
RELEASE POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) released to non-
RCRA Subtitle C landfills by the reporting
facility. Range codes may be used for releases
of less than 1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.5.1.BA
40
-------
Num.
Field Name
Type
Description
144
OTHER LANDFILLS -
RELEASE RANGE CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.5.1.BA
145
TOTAL OTHER ON-SITE
LAND RELEASES
N
System generated total non-RCRA Subtitle C
landfill release in pounds/year. If the field
OTHER LANDFILLS - RELEASE POUNDS
(# 143) is not blank, its contents are used as
the total. If it is blank, the middle of the range
for the code used in the field OTHER
LANDFILLS - RELEASE RANGE CODE
(#144) is used for the total emission value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
146
OTHER LANDFILLS -
BASIS OF ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
O = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.5.1.BB
41
-------
Num.
Field Name
Type
Description
147
LAND TRTMT/APPL
FARMING - RELEASE
POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) released in land
treatment/application farming by the reporting
facility. Range codes may be used for releases
of less than 1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.5.2.AA
148
LAND TRTMT/APPL
FARMING - RELEASE
RANGE CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.5.2.AA
149
TOTAL LAND
TREATMENT
N
System generated total land
treatment/application farming release in
pounds/year. If the field LAND TRTMT/APPL
FARMING - RELEASE POUNDS (# 147) is
not blank, its contents are used as the total. If it
is blank, the middle of the range for the code
used in the field LAND TRTMT/APPL
FARMING - RELEASE RANGE CODE
(#148) is used for the total emission value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
42
-------
Num.
Field Name
Type
Description
150
LAND TRTMT/APPL
FARMING - BASIS OF
ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.5.2.BB
151
SURFACE
IMPOUNDMENT -
RELEASE POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) released in surface
impoundments by the reporting facility. Range
codes may be used for releases of less than
1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.5.3.AA
152
SURFACE
IMPOUNDMENT - RANGE
CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.5.3.AA
43
-------
Num.
Field Name
Type
Description
153
TOTAL SURFACE
IMPOUNDMENTS
N
System generated total surface impoundment
release in pounds/year. If the field SURFACE
IMPOUNDMENT - RELEASE POUNDS
(#151) is not blank, its contents are used as the
total. If it is blank, the middle of the range for
the code used in the field SURFACE
IMPOUNDMENT - RANGE CODE (#152) is
used for the total emission value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
154
SURFACE
IMPOUNDMENT - BASIS
OF ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.5.3.BB
155
OTHER DISPOSAL -
RELEASE POUNDS
N
An estimate of the total amount of toxic
chemical (in pounds/year) released by other
disposal means by the reporting facility. Range
codes may be used for releases of less than
1000 pounds.
Source: TRI RELEASE QTY.
TOTAL RELEASE
Reference: Part II, Section 5.5.4.AA
44
-------
Num.
Field Name
Type
Description
156
OTHER DISPOSAL -
RANGE CODE
C
For releases less than 1,000 lbs, this field
provides the code used to indicate the amount
of the toxic chemical released annually from
the reporting facility within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: Part II, Section 5.5.4.AA
157
TOTAL OTHER DISPOSAL
N
System generated total other disposal release in
pounds/year. If the field OTHER DISPOSAL -
RELEASE POUNDS (# 155) is not blank, its
contents are used as the total. If it is blank, the
middle of the range for the code used in the
field OTHER DISPOSAL - RANGE CODE
(#156) is used for the total emission value.
Source: TRI RELEASE QTY.
TOTAL RELEASE, or
TRI RELEASE QTY.
RELEASE RANGE CODE
Reference: None
158
OTHER DISPOSAL -BASIS
OF ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
O = other
Source: TRI RELEASE QTY.
RELEASE BASIS EST CODE
Reference: Part II, Section 5.5.4.BB
159
TOTAL ON-SITE LAND
RELEASES
N
Total, in pounds, of toxic chemical entering
onsite environmental medium
(141+145+149+153+157).
Source: System generated
Reference: None
45
-------
Num.
Field Name
Type
Description
160
POTWS - TOTAL
TRANSFERS - METALS
ONLY
N
Total amount of reported metals, in pounds,
transferred offsite to publicly owned treatment
works.
TRI TRANSFER QTY.OFF SITE TOTAL
+ TRI TRANSFER QTY.TRANSFER
RANGE CODE
Reference: Part II, Section 6.1.A.1
161
POTWS - BASIS OF
ESTIMATE
C
A code indicating the principal method by
which the total release estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.1.A.2
162
STORAGE ONLY
N
Total amount, in pounds, reported as Astorage
only® M Code (M10).
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
163
SOLIDIFICATION/STABILI
ZATION (METALS AND
METAL COMPOUNDS)
N
Total amount, in pounds, of metals and metal
compounds reported as
Asolidification/stabilization® M Code (M41).
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
164
WASTEWATER
TREATMENT
(EXCLUDING POTWS)
N
Total amount, in pounds, reported as
Awastewater treatment® M Code (M62).
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
46
-------
Num.
Field Name
Type
Description
165
TRANSFERS TO POTWS
(METALS AND METAL
COMPOUNDS)
N
Total amount of reported metals and metal
compounds, in pounds, transferred offsite to
publicly owned treatment works.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.1.A.1
166
UNDERGROUND
INJECTION
N
Total amount, in pounds, reported as
Aunderground injection® M Code (M71).
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
167
LANDFILLS/DISPOSAL
SURFACE
IMPOUNDMENTS
N
Total amount, in pounds, reported as
Alandfills/disposal surface impoundments® M
Code (M72).
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
168
LAND TREATMENT
N
Total amount, in pounds, reported as Aland
treatment® M Code (M73).
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
169
OTHER LAND DISPOSAL
N
Total amount, in pounds, reported as Aother
land disposal® M Code (M79).
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
47
-------
Num.
Field Name
Type
Description
170
OTHER OFF-SITE
MANAGEMENT
N
Total amount, in pounds, reported as Aother off-
site management® M Code (M90).
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
171
TRANSFERS TO WASTE
BROKER FOR DISPOSAL
N
Total amount, in pounds, reported as Atransfer
to waster broker for disposal® M code (M94).
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
172
UNKNOWN
N
Total amount, in pounds, reported as
Aunknown® M code (M99).
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
173
TOTAL TRANSFERRED
OFF-SITE TO DISPOSAL
N
Total amount, in pounds, of toxic chemical in
wastes reported as being transferred to off-site
locations. Sum of all reported transfers
regardless of reported M code. Sum of
columns
(162+163+164+166+167+168+169+170+171+
172)
Source: System Generated
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2
174
TRANSFERS TO
RECYCLING (M20 ONLY)
N
Total amount, in pounds, reported as
transferred to recycling with a Type of
Recycling code of M20.
Source: TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
48
-------
Num.
Field Name
Type
Description
175
TRANSFERS TO
RECYCLING (M24 ONLY)
N
Total amount, in pounds, reported as
transferred to recycling with a Type of
Recycling code of M24.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
176
TRANSFERS TO
RECYCLING (M26 ONLY)
N
Total amount, in pounds, reported as
transferred to recycling with a Type of
Recycling code of M26.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
111
TRANSFERS TO
RECYCLING (M28 ONLY)
N
Total amount, in pounds, reported as
transferred to recycling with a Type of
Recycling code of M28.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
178
TRANSFERS TO
RECYCLING (M93 ONLY)
N
Total amount, in pounds, reported as
transferred to recycling with a Type of
Recycling code of M93.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
179
TRANSFERS TO ENERGY
RECOVERY (M56 ONLY)
N
Total amount, in pounds, reported as
transferred to energy recovery with a Type of
Recycling code of M56.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
49
-------
Num.
Field Name
Type
Description
180
TRANSFERS TO ENERGY
RECOVERY (M92 ONLY)
N
Total amount, in pounds, reported as
transferred to energy recovery with a Type of
Recycling code of M92.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
181
TRANSFERS TO
TREATMENT (M40 ONLY)
N
Total amount, in pounds, reported as
transferred to treatment with a Type of
Recycling code of M40.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
182
TRANSFERS TO
TREATMENT (M50 ONLY)
N
Total amount, in pounds, reported as
transferred to treatment with a Type of
Recycling code of M50.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
183
TRANSFERS TO
TREATMENT (M54 ONLY)
N
Total amount, in pounds, reported as
transferred to treatment with a Type of
Recycling code of M54.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
184
TRANSFERS TO
TREATMENT (M61 ONLY)
N
Total amount, in pounds, reported as
transferred to treatment with a Type of
Recycling code of M61.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
50
-------
Num.
Field Name
Type
Description
185
TRANSFERS TO
TREATMENT (M69 ONLY)
N
Total amount, in pounds, reported as
transferred to treatment with a Type of
Recycling code of M69.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
186
TRANSFERS TO
TREATMENT (M95 ONLY)
N
Total amount, in pounds, reported as
transferred to treatment with a Type of
Recycling code of M95.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
187
TRANSFERS TO POTWS
(NON-METALS)
N
Total amount of reported non-metals, in
pounds, transferred offsite to publicly owned
treatment works.
Source:
TRI TRANSFER QTY.TOTAL
TRANSFER + TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
188
TOTAL TRANSFERRED
OFF-SITE FOR FURTHER
WASTE MANAGEMENT
N
Total amount, in pounds, of toxic chemical in
wastes reported as being transferred to off-site
for further waste management. Sum of
columns
(174+175+176+177+178+179+180+181+182+
183+184+185+186+187).
Source: System generated
Reference: None
189
ENERGY RECOVERY
ONSITE CURRENT YEAR
N
Amount reported in pounds of total quantity of
toxic chemical used onsite for energy recovery
during reporting year.
Source: TRI SOURCE REDUCT QTY.
ENERGY ONSITE CURR YR QTY
Reference: Part II Section 8.2.B
51
-------
Num.
Field Name
Type
Description
190
QUANTITY RECYCLED
ONSITE CURRENT YEAR
N
Amount reported in pounds of total quantity of
toxic chemical recycled onsite during reporting
year.
Source: TRI SOURCE REDUCT QTY.
RECYC ONSITE CURR YR QTY
Reference: Part II Section 8.4.B
191
QUANTITY TREATED
ONSITE CURRENT YEAR
N
Amount reported in pounds of total quantity of
toxic chemical treated onsite during the
reporting year.
Source: TRI SOURCE REDUCT QTY.
TREATED ONSITE CURR YR QTY
Reference: Part II Section 8.6.B
192
OTHER ON-SITE WASTE
MANAGEMENT
N
Total amount, in pounds, of toxic chemical
reported as being reduced and recycled on-site.
Sum of columns (189+190+191)
Source: System generated.
Reference: None
193
ON-SITE ENERGY
RECOVERY METHOD 1
C
The first code identifying an on-site energy
recovery methods used for the reported
chemical at the facility. Codes are given for
only those chemicals that have a significant
heating value and are combusted in an energy
recovery unit such as an industrial furnace.
Source: TRI ENERGY RECOVERY.
ONSITE ENERGY PROC CODE
Reference: Part II, Section 7B.1
194
ON-SITE ENERGY
RECOVERY METHOD 2
C
The second code identifying an on-site energy
recovery methods used for the reported
chemical at the facility. Codes are given for
only those chemicals that have a significant
heating value and are combusted in an energy
recovery unit such as an industrial furnace.
Source: TRI ENERGY RECOVERY.
ONSITE ENERGY PROC CODE
Reference: Part II, Section 7B.2
52
-------
Num.
Field Name
Type
Description
195
ON-SITE ENERGY
RECOVERY METHOD 3
C
The third code identifying an on-site energy
recovery methods used for the reported
chemical at the facility. Codes are given for
only those chemicals that have a significant
heating value and are combusted in an energy
recovery unit such as an industrial furnace.
Source: TRI ENERGY RECOVERY.
ONSITE ENERGY PROC CODE
Reference: Part II, Section 7B.3
196
ON-SITE ENERGY
RECOVERY METHOD 4
C
The fourth code identifying an on-site energy
recovery methods used for the reported
chemical at the facility. Codes are given for
only those chemicals that have a significant
heating value and are combusted in an energy
recovery unit such as an industrial furnace.
Source: TRI ENERGY RECOVERY.
ONSITE ENERGY PROC CODE
Reference: Part II, Section 7B.4
197
ON-SITE RECYCLING
PROCESSES - METHOD 1
C
The first code identifying recycling processes
used on-site.
Source: TRI RECYCLING PROCESS.
ONSITE RECYCLING PROC CODE
Reference: Part II, Section 7C.1
198
ON-SITE RECYCLING
PROCESSES - METHOD 2
C
The second code identifying recycling
processes used on-site.
Source: TRI RECYCLING PROCESS.
ONSITE RECYCLING PROC CODE
Reference: Part II, Section 7C.2
199
ON-SITE RECYCLING
PROCESSES - METHOD 3
C
The third code identifying recycling processes
used on-site.
Source: TRI RECYCLING PROCESS.
ONSITE RECYCLING PROC CODE
Reference: Part II, Section 7C.3
200
ON-SITE RECYCLING
PROCESSES - METHOD 4
C
The fourth code identifying recycling
processes used on-site.
Source: TRI RECYCLING PROCESS.
ONSITE RECYCLING PROC CODE
Reference: Part II, Section 7C.4
53
-------
Num.
Field Name
Type
Description
201
ON-SITE RECYCLING
PROCESSES - METHOD 5
C
The fifth code identifying recycling processes
used on-site.
Source: TRI RECYCLING PROCESS.
ONSITE RECYCLING PROC CODE
Reference: Part II, Section 7C.5
202
ON-SITE RECYCLING
PROCESSES - METHOD 6
C
The sixth code identifying recycling processes
used on-site.
Source: TRI RECYCLING PROCESS.
ONSITE RECYCLING PROC CODE
Reference: Part II, Section 7C.6
203
ON-SITE RECYCLING
PROCESSES - METHOD 7
C
The seventh code identifying recycling
processes used on-site.
Source: TRI RECYCLING PROCESS.
ONSITE RECYCLING PROC CODE
Reference: Part II, Section 7C.7
204
ON-SITE RECYCLING
PROCESSES - METHOD 8
C
The eighth code identifying recycling
processes used on-site.
Source: TRI RECYCLING PROCESS.
ONSITE RECYCLING PROC CODE
Reference: Part II, Section 7C.8
205
ON-SITE RECYCLING
PROCESSES - METHOD 9
C
The ninth code identifying recycling processes
used on-site.
Source: TRI RECYCLING PROCESS.
ONSITE RECYCLING PROC CODE
Reference: Part II, Section 7C.9
206
ON-SITE RECYCLING
PROCESSES - METHOD 10
C
The tenth code identifying recycling processes
used on-site.
Source: TRI RECYCLING PROCESS.
ONSITE RECYCLING PROC CODE
Reference: Part II, Section 7C.10
54
-------
3.2 Detailed Source Reduction Activities and Methods (Type 2A)
Num.
Field Name
Type
Description
1
REPORTING YEAR
C
The calendar year in which the reported activities
occur.
Source: TRI REPORTING FORM
REPORTING YEAR
Reference: Part I, Section 1
2
TRADE SECRET INDICATOR
C
Indicates whether the reporting facility claims the
identity of the chemical or chemical category as a
trade secret.
Yes = Checked (Trade Secret)
No = Not checked
Note: Only Sanitized Trade Secret submissions are
stored in the TRI System database.
Source:
TRI REPORTING FORM TRADE SECRET
IND
Reference: Part I, Section 2.1
3
TRIFID
C
Facility identification in the format zzzzz-nnnnn-
sssss where usually zzzzz = facility zip code,
nnnnn = first five consonants of the name, and
sssss = first five non-special characters in the street
address.
NOTE: The contents of this field is not changed to
match facility ownership, or zip code changes.
Rather, the TRI Facility ID identifies a specific
geographical location which is also identified by
the latitude and longitude of that location.
Source: TRI FACILITY.TRI FACILITY ID
Reference: Part I, Section 4.1
4
FACILITY NAME
C
Name of the reporting facility.
Source: TRIF ACILIT Y. FACILITY NAME
Reference: Part I, Section 4.1
5
FACILITY STREET
C
Street address of the reporting facility.
Source: TRI FACILITY.STREET ADDRESS
Reference: Parti, Section 4.1
6
FACILITY CITY
C
City in which the reporting facility is located.
Source: TRIF ACILIT Y. CITYNAME
Reference: Parti, Section 4.1
55
-------
Num.
Field Name
Type
Description
7
FACILITY COUNTY
C
County in which the reporting facility is located.
Source: TRI FACILITY. COUNTYNAME
Reference: Part I, Section 4.1
8
FACILITY STATE
C
Two-letter state code of the reporting facility.
Source: TRI FACILITY.STATE ABBR
Reference: Part I, Section 4.1
9
FACILITY ZIP CODE
C
Zip code of the reporting facility.
Source: TRI FACILITY. ZIP CODE
Reference: Part I, Section 4.1
10
ENTIRE FACILITY IND
C
Indicates whether the information covers an entire
facility or part of a facility.
Yes = entire
No = partial
Source: TRI REPORTING FORM
ENTIRE FAC
Reference: Part I, Section 4.2a
11
PARTIAL FACILITY IND
C
Indicates whether the information covers an entire
facility or part of a facility.
Yes = partial
No = entire
Source: TRI REPORTING FORM
PARTIAL FAC
Reference: Part I, Section 4.2b
12
FEDERAL FACILITY IND
C
Code indicating whether a facility is Federal or
not.
Yes = Federal
No = non-Federal or GOCO
Source:
TRI REPORTING FORM FEDERAL FAC
IND
Form R: Part I Section 4.2c
56
-------
Num.
Field Name
Type
Description
13
GOCO FACILITY IND
C
Code indicating whether a facility is GOCO
(Government-Owned, Contractor-Operated)
facility or not:
Yes = GOCO
No = non-GOCO
Source: TRI REPORTING FORM GOCO
FLAG
Form R: Part I Section 4.2d
14
PRIMARY SIC CODE
C
Primary four-digit Standard Industrial
Classification (SIC) Code.
Source: TRI_SUBMISSION_SIC SIC_CODE
Reference: Part I, Section 4.5a
15
SIC CODE 2
C
Second four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source: TRI_SUBMISSION_SIC SIC_CODE
Reference: Part I, Section 4.5b
16
SIC CODE 3
C
Third four-digit Standard Industrial Classification
(SIC) Code entered by facility.
Source: TRI_SUBMISSION_SIC SIC_CODE
Reference: Part I, Section 4.5c
17
SIC CODE 4
C
Fourth four-digit Standard Industrial Classification
(SIC) Code entered by facility.
Source: TRI_SUBMISSION_SIC SIC_CODE
Reference: Part I, Section 4.5d
18
SIC CODE 5
C
Fifth four-digit Standard Industrial Classification
(SIC) Code entered by facility.
Source: TRI_SUBMISSION_SIC SIC_CODE
Reference: Part I, Section 4.5e
19
SIC CODE 6
C
Sixth four-digit Standard Industrial Classification
(SIC) Code entered by facility.
Source: TRI_SUBMISSION_SIC SIC_CODE
Reference: Part I, Section 4.5f
57
-------
Num.
Field Name
Type
Description
20
LATITUDE
N
Reported latitude of the reporting facility
converted into decimal degrees (Format: signed 2
digit whole number, 6 digit decimal positions
+nn nnnnnn)
Source: TRI FACILITY.FAC LATITUDE
Reference: Part I, Section 4.6
21
LONGITUDE
N
Reported longitude of the reporting facility
converted into decimal degrees. (Format: signed 3
digit whole number, 6 digit decimal positions
+nnn nnnnnn)
Source: TRI FACILITY.FAC LONGITUDE
Reference: Part I, Section 4.6
22
D&BNRA
C
Unique identification number assigned by Dun and
Bradstreet to the reporting facility.
Source: TRI FACILITY DB DB NUM
Reference: Part I, Section 4.7a
23
D&B NR B
C
Unique identification number assigned by Dun and
Bradstreet to the reporting facility.
Source: TRI FACILITY DB DB NUM
Reference: Part I, Section 4.7b
24
RCRA NR A
c
Twelve-digit alphanumeric identifier assigned by
EPA under the resource Conservation and
Recovery Act.
Source: TRI FACILITY RCRA RCRA NUM
Reference: Part I, Section 4.8a
25
RCRA NR B
c
Twelve-digit alphanumeric identifier assigned by
EPA under the resource Conservation and
Recovery Act.
Source: :
TRI FACILITY RCRA RCRA NUM
Reference: Part I, Section 4.8b
26
NPDESNRA
c
Nine-digit alphanumeric identifier assigned to a
facility under EPA's National Pollutant Discharge
Elimination System.
Source:
TRI FACILITY NPDES NPDES NUM
Reference: Part I, Section 4.9a
58
-------
Num.
Field Name
Type
Description
27
NPDESNR B
C
Nine-digit alphanumeric identifier assigned to a
facility under EPA's National Pollutant Discharge
Elimination System.
Source:
TRI FACILITY NPDES NPDES NUM
Reference: Part I, Section 4.9b
28
UIC NR A
C
Underground injection identification number,
assigned by EPA or the state, to a facility which
injects chemical waste into class 1 deep wells.
Source: TRI FACILITY UIC.UIC NUM
Reference: Part I, Section 4.10a
29
UIC NR B
C
Underground injection identification number,
assigned by EPA or the state, to a facility which
injects chemical waste into class 1 deep wells.
Source: TRI FACILITY UIC.UIC NUM
Reference: Part I, Section 4.10b
30
PARENT COMPANY NAME
C
Name of the corporation or other business entity
that owns or controls the reporting facility.
Source: TRI FACILITY.PARENT CO NAME
NAME
Reference: Parti, Section 5.1
31
PARENT COMPANY D&B
NR
C
Unique identification number assigned by Dun and
Bradstreet to the parent company of the reporting
facility.
Source:
TRI FACILITY.PARENT CO DB NUM
Reference: Part I, Section 5.2
59
-------
Num.
Field Name
Type
Description
32
DOCUMENT CONTROL
NUMBER
C
Unique identification number assigned to each
submission by EPA. Format:
TTYYMMMNNNNNC, where
TT = document type
YY = reporting year
MMM = document type
NNNNN= sequential number
C = check digit
Source:
TRI REPORTING FORM DOC CTRL NUM
Format: FORMR. (13 + RY + DOC TYPE +
SEQ_NUM + Check digit)
Reference: NA (System generated)
33
CAS NUMBER
C
Chemical Abstracts Service (CAS) Registry
Number for that unique chemical, or category code
(for compounds).
NOTE: CAS number 999999999 is for sanitized
trade secret submissions; CHEM_NAME displays
the reported generic chemical name.
Source:
TRI REPORTING_FOMR TRICHEMID
Reference: Part II, Section 1.1
34
CHEMICAL NAME
C
Name of the chemical or generic name if the
chemical is claimed as a trade secret.
Source:
TRI REPORTING FORM CAS CHEM
NAME
Reference: Part II, Section 1.2 or Part II, Section
1.3
60
-------
Num.
Field Name
Type
Description
35
CLASSIFICATION
C
Indicates the classification of the chemical.
Chemicals can be classified as either a Dioxin or
Dioxin-like compound, a PBT (Persistent,
Bioaccumulative and Toxic) chemical or a general
EPCRA Section 313 chemical.
Values: {TRI, PBT, DIOXIN} where
TRI = General EPCRA Section 313 Chem.
PBT = Bioaccumulative and Toxic
DIOXIN = Dioxin or Dioxin-like compound
Source-. TRI CHEM INFO
CLASSIFICATION
Reference: NONE
36
UNIT OF MEASURE
C
Indicates the unit of measure used to quantify the
chemical. Values: {Pounds, Grams}
Source: TRI CHEM INFO
UNIT OF MEASURE
Reference: NONE
37
DIOXIN DISTRIBUTION 1
N
Indicates the percentage of
1,2,3,4,6,7,8 Heptachlorodibenzofuran
(CAS # 67562-39-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 1
Reference: Part II, Section 1.4
38
DIOXIN DISTRIBUTION 2
N
Indicates the percentage of
1,2,3,4,7,8,9 Heptachlorodibenzofuran
(CAS # 55673-89-7) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 2
Reference: Part II, Section 1.4
61
-------
Num.
Field Name
Type
Description
39
DIOXIN DISTRIBUTION 3
N
Indicates the percentage of
1,2,3,4,7,8 Hexachlorodibenzofuran
(CAS # 70648-26-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 3
Reference: Part II, Section 1.4
40
DIOXIN DISTRIBUTION 4
N
Indicates the percentage of
1,2,3,6,7,8 Hexachlorodibenzofuran
(CAS # 57117-44-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 4
Reference: Part II, Section 1.4
41
DIOXIN DISTRIBUTION 5
N
Indicates the percentage of
1,2,3,7,8,9 Hexachlorodibenzofuran
(CAS # 72918-21-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 5
Reference: Part II, Section 1.4
42
DIOXIN DISTRIBUTION 6
N
Indicates the percentage of
2,3,4,6,7,8 Hexachlorodibenzofuran
(CAS # 60851-34-5) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 6
Reference: Part II, Section 1.4
62
-------
Num.
Field Name
Type
Description
43
DIOXIN DISTRIBUTION 7
N
Indicates the percentage of
1,2,3,4,7,8 Hexachlorodibenzo- p-dioxin
(CAS # 39227-28-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 7
Reference: Part II, Section 1.4
44
DIOXIN DISTRIBUTION 8
N
Indicates the percentage of
1,2,3,6,7,8 Hexachlorodibenzo- p-dioxin
(CAS # 5765385-7) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 8
Reference: Part II, Section 1.4
45
DIOXIN DISTRIBUTION 9
N
Indicates the percentage of
1,2,3,7,8,9 Hexachlorodibenzo- p-dioxin
(CAS # 19408-74-3) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 9
Reference: Part II, Section 1.4
46
DIOXIN DISTRIBUTION 10
N
Indicates the percentage of
1,2,3,4,6,7,8 Heptachlorodibenzo- p-dioxin
(CAS # 35822-46-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 10
Reference: Part II, Section 1.4
63
-------
Num.
Field Name
Type
Description
47
DIOXIN DISTRIBUTION 11
N
Indicates the percentage of
1,2,3,4,6,7,8,9 Octachlorodibenzofuran
(CAS # 39001-02-0) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 11
Reference: Part II, Section 1.4
48
DIOXIN DISTRIBUTION 12
N
Indicates the percentage of
1,2,3,4,6,7,8,9 Octachlorodibenzo- p-dioxin
(CAS # 03268-87-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 12
Reference: Part II, Section 1.4
49
DIOXIN DISTRIBUTION 13
N
Indicates the percentage of
1,2,3,7,8 Pentachlorodibenzofuran
(CAS # 57117-41-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 13
Reference: Part II, Section 1.4
50
DIOXIN DISTRIBUTION 14
N
Indicates the percentage of
2,3,4,7,8 Pentachlorodibenzofuran
(CAS # 57117-31-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 14
Reference: Part II, Section 1.4
64
-------
Num.
Field Name
Type
Description
51
DIOXIN DISTRIBUTION 15
N
Indicates the percentage of
1,2,3,7,8 Pentachlorodibenzo- p-dioxin
(CAS # 40321-76-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 15
Reference: Part II, Section 1.4
52
DIOXIN DISTRIBUTION 16
N
Indicates the percentage of
2,3,7,8 Tetrachlorodibenzofuran
(CAS # 51207-31-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 16
Reference: Part II, Section 1.4
53
DIOXIN DISTRIBUTION 17
N
Indicates the percentage of
2,3,78 Tetrachlorodibenzo- p-dioxin
(CAS # 01746-01-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 17
Reference: Part II, Section 1.4
54
QUANTITY RELEASED
PRIOR YEAR
N
Amount reported in pounds of total quantity of
toxic chemical released (including offsite disposal)
during previous year.
Source: TRI SOURCE REDUCT QTY
REL PREV YR QTY
CURRENT YEAR
Reference: Part II, Section 8. IB
55
QUANTITY RELEASED
CURRENT YEAR
N
Amount reported in pounds of total quantity of
toxic chemical released (including offsite disposal)
during reporting year.
Source: TRI SOURCE REDUCT QTY.
REL CURR YR QTY
CURRENT YEAR
Reference: Part II, Section 8. IB
65
-------
Num.
Field Name
Type
Description
56
QUANTITY RELEASED
FOLLOWING YEAR
N
Amount reported in pounds of total quantity of the
toxic chemical projected to be released (including
offsite disposal) in the first year following the
reporting year.
Source: TRI SOURCE REDUCT QTY.
REL FOLL YR QTY
Reference: Part II, Section 8.1C
57
QUANTITY RELEASED
SECOND FOLLOWING
YEAR
N
Amount reported in pounds of total quantity of
toxic chemical projected to be released (including
offsite disposal) in second year following reporting
year.
Source: TRI SOURCE REDUCT QTY.
REL SECD YR QTY
Reference: Part II, Section 8.ID
58
ENERGY RECOVERY
ONSITE PRIOR YEAR
N
Amount reported in pounds of total quantity of
toxic chemical used onsite for energy recovery
during the previous year.
Source: TRI SOURCE REDUCT QTY.
ENERGY ONSITE PREV YR QTY
Reference: Part II, Section 8.2A
59
ENERGY RECOVERY
ONSITE CURRENT YEAR
N
Amount reported in pounds of total quantity of
toxic chemical used onsite for energy recovery
during reporting year.
Source: TRI SOURCE REDUCT QTY.
ENERGY ONSITE CURR YR QTY
Reference: Part II, Section 8.2B
60
ENERGY RECOVERY
ONSITE FOLLOWING YEAR
N
Amount reported in pounds of total quantity of
toxic chemical projected to be used onsite for
energy recovery in first year following reporting
year.
Source: TRI SOURCE REDUCT QTY.
ENERGY ONSITE FOLL YR QTY
Reference: Part II, Section 8.2C
61
ENERGY RECOVERY
ONSITE SECOND
FOLLOWING YEAR
N
Amount reported in pounds of total quantity of
toxic chemical projected to be used onsite for
energy recovery in second year following reporting
year.
Source: TRI SOURCE REDUCT QTY.
ENERGY ONSITE SECD YR QTY
Form R: Part II, Section 8.2D
66
-------
Num.
Field Name
Type
Description
62
ENERGY RECOVERY
OFFSITE PRIOR YEAR
N
Amount reported in pounds of total quantity of
toxic chemical sent offsite for energy recovery
during previous year.
Source: TRI SOURCE REDUCT QTY.
ENERGY OFFSITE PREV YR QTY
Reference: Part II, Section 8.3A
63
ENERGY RECOVERY
OFFSITE CURRENT YEAR
N
Amount reported in pounds of total quantity of
toxic chemical sent offsite for energy recovery
during the reporting year.
Source: TRI SOURCE REDUCT QTY.
ENERGY OFFSITE CURR YR QTY
Reference: Part II, Section 8.3B
64
ENERGY RECOVERY
OFFSITE FOLLOWING YEAR
N
Amount reported in pounds of total quantity of
toxic chemical projected to be sent offsite for
energy recovery in first year following reporting
year.
Source: TRI SOURCE REDUCT QTY.
ENERGY OFFSITE FOLL YR QTY
Form R: Part II, Section 8.3C
65
ENERGY RECOVERY
OFFSITE SECOND
FOLLOWING YEAR
N
Amount reported in pounds of total quantity of
toxic chemical projected to be sent offsite for
energy recovery in second year following reporting
year.
Source: TRI SOURCE REDUCT QTY.
ENERGY OFFSITE SECD YR QTY
Form R: Part II, Section 8.3D
66
QUANTITY RECYCLED
ONSITE PRIOR YEAR
N
Amount reported in pounds of total quantity of
toxic chemical recycled onsite during the previous
year.
Source: TRI SOURCE REDUCT QTY.
RECYC ONSITE PREV YR QTY
Reference: Part II, Section 8.4A
67
QUANTITY RECYCLED
ONSITE CURRENT YEAR
N
Amount reported in pounds of total quantity of
toxic chemical recycled onsite during reporting
year.
Source: TRI SOURCE REDUCT QTY.
RECYC ONSITE CURR YR QTY
Reference: Part II, Section 8.4B
67
-------
Num.
Field Name
Type
Description
68
QUANTITY RECYCLED
ONSITE FOLLOWING YEAR
N
Amount reported in pounds of total quantity of
toxic chemical projected to be recycled onsite in
first year following reporting year.
Source: TRI SOURCE REDUCT QTY.
RECYC ONSITE FOLL YR QTY
resource: Part II, Section 8.4C
69
QUANTITY RECYCLED
ONSITE SECOND
FOLLOWING YEAR
N
Amount reported in pounds of total quantity of
toxic chemical projected to be recycled onsite in
second year following reporting year.
Source: TRI SOURCE REDUCT QTY.
RECYC ONSITE SECD YR QTY
Reference: Part II, Section 8.4D
70
QUANTITY RECYCLED
OFFSITE PRIOR YEAR
N
Amount reported in pounds of total quantity of
toxic chemical sent offsite for recycling during the
previous year.
Source: TRI SOURCE REDUCT QTY.
RECYC OFFSITE PREV YR QTY
Reference: Part II, Section 8.5A
71
QUANTITY RECYCLED
OFFSITE CURRENT YEAR
N
Amount reported in pounds of total quantity of
toxic chemical sent offsite for recycling during
reporting year.
Source: TRI SOURCE REDUCT QTY.
RECYC OFFSITE CURR YR QTY
Reference: Part II, Section 8.5B
72
QUANTITY RECYCLED
OFFSITE FOLLOWING YEAR
N
Amount reported in pounds of total quantity of
toxic chemical projected to be sent offsite for
recycling in first year following reporting year.
Source: TRI SOURCE REDUCT QTY.
RECYC OFFSITE FOLL YR QTY
Form R: Part II, Section 8.5C
73
QUANTITY RECYCLED
OFFSITE SECOND
FOLLOWING YEAR
N
Amount reported in pounds of total quantity of
toxic chemical projected to be sent offsite for
energy recovery in second year following reporting
year.
Source: TRI SOURCE REDUCT QTY.
RECYC OFFSITE PREV YR QTY
Reference: Part II, Section 8.5D
68
-------
Num.
Field Name
Type
Description
74
QUANTITY TREATED
ONSITE PRIOR YEAR
N
Amount reported in pounds of total quantity of
toxic chemical treated onsite during the previous
year.
Source: TRI SOURCE REDUCT QTY.
TREATED ONSITE PREV YR QTY
Reference: Part II, Section 8.6A
75
QUANTITY TREATED
ONSITE CURRENT YEAR
N
Amount reported in pounds of total quantity of
toxic chemical treated onsite during the reporting
year.
Source: TRI SOURCE REDUCT QTY.
TREATED ONSITE CURR YR QTY
Reference: Part II, Section 8.6B
76
QUANTITY TREATED
ONSITE FOLLOWING YEAR
N
Amount reported in pounds of total quantity of
toxic chemical projected to be treated onsite in the
first year following the reporting year.
Source: TRI SOURCE REDUCT QTY.
TREATED ONSITE FOLL YR QTY
Reference: Part II, Section 8.6C
77
QUANTITY TREATED
ONSITE SECOND
FOLLOWING YEAR
N
Amount reported in pounds of total quantity of
toxic chemical projected to be treated onsite in
second year following reporting year.
Source: TRI SOURCE REDUCT QTY.
TREATED ONSITE SECD YR QTY
Reference: Part II, Section 8.6D
78
QUANTITY TREATED
OFFSITE PRIOR YEAR
N
Amount reported in pounds of total quantity of the
toxic chemical treated offsite during the previous
reporting year.
Source: TRI SOURCE REDUCT QTY.
TREATED OFFSITE PREV YR QTY
Reference: Part II, Section 8.7A
79
QUANTITY TREATED
OFFSITE CURRENT YEAR
N
Amount reported in pounds of total quantity of
toxic chemical sent offsite for treatment (including
transfers to POTWs) during the reporting year.
Source: TRI SOURCE REDUCT QTY.
TREATED OFFSITE CURR YR QTY
Reference: Part II, Section 8.7B
69
-------
Num.
Field Name
Type
Description
80
QUANTITY TREATED
OFFSITE FOLLOWING YEAR
N
Amount reported in pounds of total quantity of
toxic chemical sent offsite for treatment (including
transfers to POTWs) in the first year following the
reporting year.
Source: TRI SOURCE REDUCT QTY.
TREATED OFFSITE FOLL YR QTY
Reference: Part II, Section 8.7C
81
QUANTITY TREATED
OFFSITE SECOND
FOLLOWING YEAR
N
Amount reported in pounds of total quantity of
toxic chemical projected to be sent offsite for
treatment (including transfers to POTWs) in
second year following reporting year.
Source: TRI SOURCE REDUCT QTY.
TREATED OFFSITE PREV YR QTY
Reference: Part II, Section 8.7D
82
CATASTROPHIC RELEASES
OR OTHER ONE-TIME
EVENTS
N
Amount reported in pounds of total quantity of
toxic chemical released to the environment or
transferred offsite due to events not associated with
routine production processes. Reported as pounds.
Source: TRI REPORTING FORM ONE
TIME RELEASE QTY
Reference: Part II, Section 8.8
83
PROD RATIO/ACTIVITY
INDEX
N
Ratio of production or activity in the reporting year
divided by production or activity in the previous
year. Field length is in the format of +nnnn.nn.
Source:
TRI REPORTING FORM PRODUCTION
RATIO
Reference: Part II, Section 8.9
84
FIRST SOURCE REDUCTION
ACTIVITY
C
Activity code indicating the action taken to reduce
the amount of the reported toxic chemical released,
used for energy recovery, recycled, or treated.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT ACTIVITY
Reference: Part II, Section 8.10.1
85
FIRST SOURCE REDUCTION
ACTIVITY DESCRIPTION
C
Description of the preceding Source reduction
activity code.
Source:
TRI_CODE_DESC DESCRIPTION
Reference: Part II, Section 8.10.1
70
-------
Num.
Field Name
Type
Description
86
FIRST SOURCE REDUCTION
METHOD - CODE 1
C
Code corresponding to the internal or external
method (or the information Sources) used to
identify the Source reduction activity
implementation at a facility.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT METHOD 1
Reference: Part II, Section 8.10.1a
87
FIRST SOURCE REDUCTION
METHOD - CODE 1
DESCRIPTION
C
Description of the preceding Source reduction
activity method code.
Source:
TRIDESCCODE.DESCRIPTION
Reference: Part II, Section 8.10.1a
88
FIRST SOURCE REDUCTION
METHOD - CODE 2
C
Code corresponding to the internal or external
method (or the information Sources) used to
identify the Source reduction activity
implementation at a facility.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT METHOD 2
Reference: Part II, Section 8.10.1b
89
FIRST SOURCE REDUCTION
METHOD - CODE 2
DESCRIPTION
C
Description of the preceding Source reduction
activity method code.
Source:
TRIDESCCODE.DESCRIPTION
Reference: Part II, Section 8.10.1b
90
FIRST SOURCE REDUCTION
METHOD - CODE 3
C
Code corresponding to the internal or external
method (or the information Sources) used to
identify the Source reduction activity
implementation at a facility.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT METHOD 3
Reference: Part II, Section 8.10.1c
91
FIRST SOURCE REDUCTION
METHOD - CODE 3
DESCRIPTION
C
Description of the preceding Source reduction
activity method code.
Source:
TRIDESCCODE.DESCRIPTION
Reference: Part II, Section 8.10.1c
71
-------
Num.
Field Name
Type
Description
92
SECOND SOURCE
REDUCTION ACTIVITY
C
Activity code indicating the action taken to reduce
the amount of the reported toxic chemical released,
used for energy recovery, recycled, or treated.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT ACTIVITY
Reference: Part II, Section 8.10.2
93
SECOND SOURCE
REDUCTION ACTIVITY
DESCRIPTION
C
Description of the preceding Source reduction
activity code.
Source: TRI CODE DESC DESCRIPTION
Reference: Part II, Section 8.10.2
94
SECOND SOURCE
REDUCTION METHOD -
CODE 1
C
Code corresponding to the internal or external
method (or the information Sources) used to
identify the Source reduction activity
implementation at a facility.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT METHOD 1
Reference: Part II, Section 8.10.2.a
95
SECOND SOURCE
REDUCTION METHOD -
CODE 1 DESCRIPTION
C
Description of the preceding Source reduction
activity method code.
Source:
TRIDESCCODE.DESCRIPTION
Reference: Part II, Section 8.10.2.a
96
SECOND SOURCE
REDUCTION METHOD -
CODE 2
C
Code corresponding to the internal or external
method (or the information Sources) used to
identify the Source reduction activity
implementation at a facility.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT METHOD 2
Reference: Part II, Section 8.10.2b
97
SECOND SOURCE
REDUCTION METHOD -
CODE 2 DESCRIPTION
C
Description of the preceding Source reduction
activity method code.
Source:
TRIDESCCODE.DESCRIPTION
Reference: Part II, Section 8.10.2b
72
-------
Num.
Field Name
Type
Description
98
SECOND SOURCE
REDUCTION METHOD -
CODE 3
C
Code corresponding to the internal or external
method (or the information Sources) used to
identify the Source reduction activity
implementation at a facility.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT METHOD 3
Reference: Part II, Section 8.10.2.c
99
SECOND SOURCE
REDUCTION METHOD -
CODE 3 DESCRIPTION
C
Description of the preceding Source reduction
activity method code.
Source:
TRIDESCCODE.DESCRIPTION
Reference: Part II, Section 8.10.2.c
100
THIRD SOURCE
REDUCTION ACTIVITY
C
Activity code indicating the action taken to reduce
the amount of the reported toxic chemical released,
used for energy recovery, recycled, or treated.
Source: TRI SOURCE REDUCT METHOD
SOURCE REDUCT ACTIVITY
Reference: Part II, Section 8.10.3
101
THIRD SOURCE
REDUCTION ACTIVITY
DESCRIPTION
C
Description of the preceding Source reduction
activity code.
Source: TRI CODE DESC DESCRIPTION
Reference: Part II, Section 8.10.3
102
THIRD SOURCE
REDUCTION METHOD -
CODE 1
C
Code corresponding to the internal or external
method (or the information Sources) used to
identify the Source reduction activity
implementation at a facility.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT METHOD 1
Reference: Part II, Section 8.10.3a
103
THIRD SOURCE
REDUCTION METHOD -
CODE 1 DESCRIPTION
C
Description of the preceding Source reduction
activity method code.
Source:
TRIDESCCODE.DESCRIPTION
Reference: Part II, Section 8.10.3a
73
-------
Num.
Field Name
Type
Description
104
THIRD SOURCE
REDUCTION METHOD -
CODE 2
C
Code corresponding to the internal or external
method (or the information Sources) used to
identify the Source reduction activity
implementation at a facility.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT METHOD 2
Reference: Part II, Section 8.10.3b
105
THIRD SOURCE
REDUCTION METHOD -
CODE 2 DESCRIPTION
C
Description of the preceding Source reduction
activity method code.
Source:
TRIDESCCODE.DESCRIPTION
Reference: Part II, Section 8.10.3b
106
THIRD SOURCE
REDUCTION METHOD -
CODE 3
C
Code corresponding to the internal or external
method (or the information Sources) used to
identify the Source reduction activity
implementation at a facility.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT METHOD 3
Reference: Part II, Section 8.10.3c
107
THIRD SOURCE
REDUCTION METHOD -
CODE 3 DESCRIPTION
C
Description of the preceding Source reduction
activity method code.
Source:
TRIDESCCODE.DESCRIPTION
Reference: Part II, Section 8.10.3c
108
FOURTH SOURCE
REDUCTION ACTIVITY
C
Activity code indicating the action taken to reduce
the amount of the reported toxic chemical released,
used for energy recovery, recycled, or treated.
Source: TRI SOURCE REDUCT METHOD
SOURCE REDUCT ACTIVITY
Reference: Part II, Section 8.10.4
109
FOURTH SOURCE
REDUCTION ACTIVITY
DESCRIPTION
C
Description of the preceding Source reduction
activity code.
Source:
TRI CODE DESC DESCRIPTION
Reference: Part II, Section 8.10.4
74
-------
Num.
Field Name
Type
Description
110
FOURTH SOURCE
REDUCTION METHOD -
CODE 1
C
Code corresponding to the internal or external
method (or the information Sources) used to
identify the Source reduction activity
implementation at a facility.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT METHOD 1
Reference: Part II, Section 8.10.4a
111
FOURTH SOURCE
REDUCTION METHOD -
CODE 1 DESCRIPTION
C
Description of the preceding Source reduction
activity method code.
Source:
TRIDESCCODE.DESCRIPTION
Reference: Part II, Section 8.10.4a
112
FOURTH SOURCE
REDUCTION METHOD -
CODE 2
C
Code corresponding to the internal or external
method (or the information Sources) used to
identify the Source reduction activity
implementation at a facility.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT METHOD 2
Reference Part II, Section 8.10.4b
113
FOURTH SOURCE
REDUCTION METHOD -
CODE 2 DESCRIPTION
C
Description of the preceding Source reduction
activity method code.
Source:
TRIDESCCODE.DESCRIPTION
Reference Part II, Section 8.10.4b
114
FOURTH SOURCE
REDUCTION METHOD -
CODE 3
C
Code corresponding to the internal or external
method (or the information Sources) used to
identify the Source reduction activity
implementation at a facility.
Source:
TRI SOURCE REDUCT METHOD
SOURCE REDUCT METHOD 3
Reference: Part II, Section 8.10.4c
115
FOURTH SOURCE
REDUCTION METHOD -
CODE 3 DESCRIPTION
C
Description of the preceding Source reduction
activity method code.
Source:
TRIDESCCODE.DESCRIPTION
Reference: Part II, Section 8.10.4c
75
-------
76
-------
3.3 Detailed Waste Management (Type 2B)
Num.
Field Name
Type
Description
1
REPORTING YEAR
C
The calendar year in which the reported activities
occur.
Source: TRI REPORTING FORM
REPORTING YEAR
Reference: Part I, Section 1
2
TRADE SECRET
INDICATOR
C
Indicates whether the reporting facility claims the
identity of the chemical or chemical category as a
trade secret.
Yes = Checked (Trade Secret)
No = Not checked
Note: Only Sanitized Trade Secret submissions are
stored in the TRI System database.
Source:
TRI REPORTING FORM TRADE SECRET
IND
Reference: Part I, Section 2.1
3
TRIFID
C
Facility identification in the format zzzzz-nnnnn-
sssss where usually zzzzz = facility zip code, nnnnn
= first five consonants of the name, and sssss = first
five non-special characters in the street address.
NOTE: The contents of this field is not changed to
match facility ownership, or zip code changes.
Rather, the TRI Facility ID identifies a specific
geographical location which is also identified by the
latitude and longitude of that location.
Source: TRI FACILITY.TRI FACILITY ID
Reference: Part I, Section 4.1
4
FACILITY NAME
C
Name of the reporting facility.
Source: TRIFACILITY.FACILITY NAME
Reference: Part I, Section 4.1
5
FACILITY STREET
C
Street address of the reporting facility.
Source: TRI FACILITY.STREET ADDRESS
Reference: Parti, Section 4.1
6
FACILITY CITY
C
City in which the reporting facility is located.
Source: TRIF ACILIT Y. CITYNAME
Reference: Parti, Section 4.1
77
-------
7
FACILITY COUNTY
C
County in which the reporting facility is located.
Source: TRI FACILITY.COUNTY NAME
Reference: Part I, Section 4.1
8
FACILITY STATE
C
Two-letter state code of the reporting facility.
Source: TRI FACILITY.STATE ABBR"
Reference: Part I, Section 4.1
9
FACILITY ZIP CODE
C
Zip code of the reporting facility.
Source: TRI FACILITY ZIP CODE
Reference: Part I, Section 4.1
10
ENTIRE FACILITY IND
C
Indicates whether the information covers an entire
facility or part of a facility.
Yes = entire
No = partial
Source: TRI REPORTING FORM
ENTIRE FAC
Reference: Part I, Section 4.2a
11
PARTIAL FACILITY IND
C
Indicates whether the information covers an entire
facility or part of a facility.
Yes = partial
No = entire
Source: TRI REPORTING FORM
PARTIAL FAC
Reference: Part I, Section 4.2b
12
FEDERAL FACILITY IND
C
Code indicating whether a facility is Federal or not.
Yes = Federal
No = non-Federal or GOCO
Source:
TRI REPORTING FORM FEDERAL FAC
IND
Form R: Part I Section 4.2c
13
GOCO FACILITY IND
C
Code indicating whether a facility is GOCO
(Government-Owned, Contractor-Operated) facility
or not:
Yes = GOCO
No = non-GOCO
Source: TRI REPORTING FORM GOCO
FLAG
Form R: Part I Section 4.2d
78
-------
14
PRIMARY SIC CODE
C
Primary four-digit Standard Industrial Classification
(SIC) Code.
Source: TRI_SUBMISSION_SIC SIC_CODE
Reference: Part I, Section 4.5a
15
SIC CODE 2
C
Second four-digit Standard Industrial Classification
(SIC) Code entered by facility.
Source: TRI_SUBMISSION_SIC SIC_CODE
Reference: Part I, Section 4.5b
16
SIC CODE 3
C
Third four-digit Standard Industrial Classification
(SIC) Code entered by facility.
Source: TRI_SUBMISSION_SIC SIC_CODE
Reference: Part I, Section 4.5c
17
SIC CODE 4
C
Fourth four-digit Standard Industrial Classification
(SIC) Code entered by facility.
Source: TRI_SUBMISSION_SIC SIC_CODE
Reference: Part I, Section 4.5d
18
SIC CODE 5
C
Fifth four-digit Standard Industrial Classification
(SIC) Code entered by facility.
Source: TRI_SUBMISSION_SIC SIC_CODE
Reference: Part I, Section 4.5e
19
SIC CODE 6
C
Sixth four-digit Standard Industrial Classification
(SIC) Code entered by facility.
Source: TRI_SUBMISSION_SIC SIC_CODE
Reference: Part I, Section 4.5f
20
LATITUDE
N
Reported latitude of the reporting facility converted
into decimal degrees (Format: signed 2 digit whole
number, 6 digit decimal positions +nn nnnnnn)
Source: TRI FACILITY.FAC LATITUDE
Reference: Part I, Section 4.6
21
LONGITUDE
N
Reported longitude of the reporting facility
converted into decimal degrees. (Format: signed 3
digit whole number, 6 digit decimal positions
+nnn nnnnnn)
Source: TRI FACILITY.FAC LONGITUDE
Reference: Part I, Section 4.6
22
D&BNRA
C
Unique identification number assigned by Dun and
Bradstreet to the reporting facility.
Source: TRI FACILITY DB DB NUM
Reference: Part I, Section 4.7a
79
-------
23
D&B NR B
C
Unique identification number assigned by Dun and
Bradstreet to the reporting facility.
Source: TRI FACILITY DB DB NUM
Reference: Part I, Section 4.7b
24
RCRA NR A
C
Twelve-digit alphanumeric identifier assigned by
EPA under the resource Conservation and Recovery
Act.
Source: TRI FACILITY RCRA RCRA NUM
Reference: Part I, Section 4.8a
25
RCRA NR B
C
Twelve-digit alphanumeric identifier assigned by
EPA under the resource Conservation and Recovery
Act.
Source: : TRI FACILITY RCRA.RCRA NUM
Reference: Part I, Section 4.8b
26
NPDES NR A
C
Nine-digit alphanumeric identifier assigned to a
facility under EPA's National Pollutant Discharge
Elimination System.
Source: TRI FACILITY NPDES NPDES NUM
Reference: Part I, Section 4.9a
27
NPDES NR B
C
Nine-digit alphanumeric identifier assigned to a
facility under EPA's National Pollutant Discharge
Elimination System.
Source: TRI FACILITY NPDES.NPDES NUM
Reference: Part I, Section 4.9b
28
UIC NR A
C
Underground injection identification number,
assigned by EPA or the state, to a facility which
injects chemical waste into class 1 deep wells.
Source: TRI FACILITY UIC.UIC NUM
Reference: Part I, Section 4.10a
29
UIC NR B
C
Underground injection identification number,
assigned by EPA or the state, to a facility which
injects chemical waste into class 1 deep wells.
Source: TRI_FACILITY_UIC.UIC_NUM
Reference: Part I, Section 4.10b
30
PARENT COMPANY NAME
C
Name of the corporation or other business entity
that owns or controls the reporting facility.
Source: TRI FACILITY.PARENT CO NAME
NAME
Reference: Parti, Section 5.1
80
-------
31
PARENT COMPANY D&B
NR
C
Unique identification number assigned by Dun and
Bradstreet to the parent company of the reporting
facility.
Source:
TRI FACILITY PARENTCO DB NUM
Reference: Part I, Section 5.2
32
DOCUMENT CONTROL
NUMBER
C
Unique identification number assigned to each
submission by EPA. Format:
TTYYMMMNNNNNC, where
TT = document type
YY = reporting year
MMM = document type
NNNNN= sequential number
C = check digit
Source:
TRI REPORTING FORM DOC CTRL NUM
Format: FORMR. (13 + RY + DOC TYPE +
SEQ_NUM + Check digit)
Reference: NA (System generated)
33
CAS NUMBER
C
Chemical Abstracts Service (CAS) Registry
Number for that unique chemical, or category code
(for compounds).
NOTE: CAS number 999999999 is for sanitized
trade secret submissions; CHEM_NAME displays
the reported generic chemical name.
Source:
TRI REPORTING_FOMR TRICHEMID
Reference: Part II, Section 1.1
34
CHEMICAL NAME
C
Name of the chemical or generic name if the
chemical is claimed as a trade secret.
Source:
TRI REPORTING FORM CAS CHEM
NAME
Reference: Part II, Section 1.2 or Part II, Section 1.3
81
-------
35
CLASSIFICATION
C
Indicates the classification of the chemical.
Chemicals can be classified as either a Dioxin or
Dioxin-like compound, a PBT (Persistent,
Bioaccumulative and Toxic) chemical or a general
EPCRA Section 313 chemical.
Values: {TRI, PBT, DIOXIN} where
TRI = General EPCRA Section 313 Chem.
PBT = Bioaccumulative and Toxic
DIOXIN = Dioxin or Dioxin-like compound
Source-. TRI CHEM INFO
CLASSIFICATION
Reference: NONE
36
UNIT OF MEASURE
C
Indicates the unit of measure used to quantify the
chemical. Values: {Pounds, Grams}
Source: TRI CHEM INFO
UNIT OF MEASURE
Reference: NONE
37
DIOXIN DISTRIBUTION 1
N
Indicates the percentage of
1,2,3,4,6,7,8 Heptachlorodibenzofuran
(CAS # 67562-39-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 1
Reference: Part II, Section 1.4
38
DIOXIN DISTRIBUTION 2
N
Indicates the percentage of
1,2,3,4,7,8,9 Heptachlorodibenzofuran
(CAS # 55673-89-7) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 2
Reference: Part II, Section 1.4
82
-------
39
DIOXIN DISTRIBUTION 3
N
Indicates the percentage of
1,2,3,4,7,8 Hexachlorodibenzofuran
(CAS # 70648-26-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 3
Reference: Part II, Section 1.4
40
DIOXIN DISTRIBUTION 4
N
Indicates the percentage of
1,2,3,6,7,8 Hexachlorodibenzofuran
(CAS # 57117-44-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 4
Reference: Part II, Section 1.4
41
DIOXIN DISTRIBUTION 5
N
Indicates the percentage of
1,2,3,7,8,9 Hexachlorodibenzofuran
(CAS # 72918-21-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 5
Reference: Part II, Section 1.4
42
DIOXIN DISTRIBUTION 6
N
Indicates the percentage of
2,3,4,6,7,8 Hexachlorodibenzofuran
(CAS # 60851-34-5) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 6
Reference: Part II, Section 1.4
83
-------
43
DIOXIN DISTRIBUTION 7
N
Indicates the percentage of
1,2,3,4,7,8 Hexachlorodibenzo- p-dioxin
(CAS # 39227-28-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 7
Reference: Part II, Section 1.4
44
DIOXIN DISTRIBUTION 8
N
Indicates the percentage of
1,2,3,6,7,8 Hexachlorodibenzo- p-dioxin
(CAS # 5765385-7) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 8
Reference: Part II, Section 1.4
45
DIOXIN DISTRIBUTION 9
N
Indicates the percentage of
1,2,3,7,8,9 Hexachlorodibenzo- p-dioxin
(CAS # 19408-74-3) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 9
Reference: Part II, Section 1.4
46
DIOXIN DISTRIBUTION 10
N
Indicates the percentage of
1,2,3,4,6,7,8 Heptachlorodibenzo- p-dioxin
(CAS # 35822-46-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 10
Reference: Part II, Section 1.4
84
-------
47
DIOXIN DISTRIBUTION 11
N
Indicates the percentage of
1,2,3,4,6,7,8,9 Octachlorodibenzofuran
(CAS # 39001-02-0) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 11
Reference: Part II, Section 1.4
48
DIOXIN DISTRIBUTION 12
N
Indicates the percentage of
1,2,3,4,6,7,8,9 Octachlorodibenzo- p-dioxin
(CAS # 03268-87-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 12
Reference: Part II, Section 1.4
49
DIOXIN DISTRIBUTION 13
N
Indicates the percentage of
1,2,3,7,8 Pentachlorodibenzofuran
(CAS # 57117-41-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 13
Reference: Part II, Section 1.4
50
DIOXIN DISTRIBUTION 14
N
Indicates the percentage of
2,3,4,7,8 Pentachlorodibenzofuran
(CAS # 57117-31-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 14
Reference: Part II, Section 1.4
85
-------
51
DIOXIN DISTRIBUTION 15
N
Indicates the percentage of
1,2,3,7,8 Pentachlorodibenzo- p-dioxin
(CAS # 40321-76-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 15
Reference: Part II, Section 1.4
52
DIOXIN DISTRIBUTION 16
N
Indicates the percentage of
2,3,7,8 Tetrachlorodibenzofuran
(CAS # 51207-31-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 16
Reference: Part II, Section 1.4
53
DIOXIN DISTRIBUTION 17
N
Indicates the percentage of
2,3,78 Tetrachlorodibenzo- p-dioxin
(CAS # 01746-01-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or a
number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 17
Reference: Part II, Section 1.4
54
STREAM 1 - WASTE
STREAM CODE
C
This field provides the indicator that shows the type
of general waste stream containing the reported
chemical that is being treated. Indicator values are
as follows:
A = gaseous
W = wastewater
L = liquid waste
S = solid waste
Source: TRI ONSITE WASTESTREAM
WASTESTREAM CODE
Reference: Part II, Section 7A.la
86
-------
55
STREAM 1 - TRTMT
METHOD - SEQUENCE 1
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.lb
56
STREAM 1 - TRTMT
METHOD - SEQUENCE 2
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.lb
57
STREAM 1 - TRTMT
METHOD - SEQUENCE 3
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.lb
58
STREAM 1 -TRTMT
METHOD - SEQUENCE 4
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.lb
87
-------
59
STREAM 1 - TRTMT
METHOD - SEQUENCE 5
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.lb
60
STREAM 1 - TRTMT
METHOD - SEQUENCE 6
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.lb
61
STREAM 1 - TRTMT
METHOD - SEQUENCE 7
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.lb
62
STREAM 1 - TRTMT
METHOD - SEQUENCE 8
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.lb
63
STREAM 1 - RANGE
INFLUENT CONCENT
C
Code corresponding to the range concentration of
the toxic chemical as it typically enters the specified
waste treatment step or sequence.
Source: TRI ONSITE WASTESTREAM
INFLUENT CONC RANGE
Reference: Part II, Section 7A.lc
88
-------
64
STREAM 1 - TRTMT
EFFICIENCY EST
N
Estimate of the percentage of the toxic chemical
removed from the waste stream through
destruction, biological degradation, chemical
conversion, or physical removal of the chemical
from the wastestream being treated.
Source: TRI ONSITE WASTESTREAM
TREATMENT EFFICIENCY EST
Reference: Part II, Section 7A. 1 .d
65
STREAM 1 - BASED ON
OPERATING DATA?
C
Indicates that the information
given in the EFFICIENCY field is based on
operating data. Value is either Ayes® or Ano@.
Source: TRI ONSITE WASTESTREAM
OPERATING DATA IND
Reference: Part II, Section 7A. 1 .e
66
STREAM 2 - WASTE
STREAM CODE
C
The indicator that shows the type of general waste
stream containing the reported chemical that is
being treated. Indicator values are as follows:
A = gaseous
W = wastewater
L = liquid waste
S = solid waste
Source: : TRI ONSITE WASTESTREAM
WASTESTREAM CODE
Reference: Part II, Section 7A.2a
67
STREAM 2 - TRTMT
METHOD - SEQUENCE 1
c
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.2b
68
STREAM 2 - TRTMT
METHOD - SEQUENCE 2
c
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.2b
89
-------
69
STREAM 2 - TRTMT
METHOD - SEQUENCE 3
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source: V TREATMENT.TREATMENT CODE
Reference: Part II, Section 7A.2b
70
STREAM 2 -TRTMT
METHOD - SEQUENCE 4
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.2b
71
STREAM 2 - TRTMT
METHOD - SEQUENCE 5
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.2b
72
STREAM 2 - TRTMT
METHOD - SEQUENCE 6
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.2b
73
STREAM 2 - TRTMT
METHOD - SEQUENCE 7
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.2b
90
-------
74
STREAM 2 - TRTMT
METHOD - SEQUENCE 8
C
Code corresponding to the treatment method used
on waste stream containing the reported chemical,
regardless of whether the waste treatment method
actually removes the specific chemical being
reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.2b
75
STREAM 2 - RANGE
INFLUENT CONCENT
C
Code corresponding to the range concentration of
the toxic chemical as it typically enters the specified
waste treatment step or sequence.
Source: TRI ONSITE WASTESTREAM
INFLUENT CONC RANGE
Reference: Part II, Section 7A.2c
76
STREAM 2 - TRTMT
EFFICIENCY EST
N
The estimate of the percentage of the toxic
chemical removed from the waste stream through
destruction, biological degradation, chemical
conversion, or physical removal of the chemical
from the wastestream being treated.
Source: TRI ONSITE WASTESTREAM
TREATMENT EFFICIENCY EST
Reference: Part II, Section 7A.2.d
77
STREAM 2 - BASED ON
OPERATING DATA?
C
This field indicates that the information
given in the EFFICIENCY field is based on
operating data. Value is either Ayes® or Ano@.
Source: TRI ONSITE WASTESTREAM
OPERATING DATA IND
Reference: Part II, Section 7A.2.e
78
STREAM 3 - WASTE
STREAM CODE
C
Provides the indicator that shows the type of general
waste stream containing the reported chemical that
is being treated. Indicator values are as follows:
A = gaseous
W = wastewater
L = liquid waste
S = solid waste
Source: TRI ONSITE WASTESTREAM
WASTESTREAM CODE
Reference: Part II, Section 7A.3a
91
-------
79
STREAM 3 - TRTMT
METHOD - SEQUENCE 1
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.3b
80
STREAM 3 - TRTMT
METHOD - SEQUENCE 2
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.3b
81
STREAM 3 - TRTMT
METHOD - SEQUENCE 3
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.3b
82
STREAM 3 -TRTMT
METHOD - SEQUENCE 4
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.3b
92
-------
83
STREAM 3 - TRTMT
METHOD - SEQUENCE 5
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.3b
84
STREAM 3 - TRTMT
METHOD - SEQUENCE 6
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.3b
85
STREAM 3 - TRTMT
METHOD - SEQUENCE 7
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.3b
86
STREAM 3 - TRTMT
METHOD - SEQUENCE 8
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.3b
87
STREAM 3 - RANGE
INFLUENT CONCENT
C
Provides the code corresponding to the range
concentration of the toxic chemical as it typically
enters the specified waste treatment step or
sequence.
Source: TRI ONSITE WASTESTREAM
INFLUENT CONC RANGE
Reference: Part II, Section 7A.3c
93
-------
88
STREAM 3 - TRTMT
EFFICIENCY EST
N
Provides the estimate of the percentage of the toxic
chemical removed from the waste stream through
destruction, biological degradation, chemical
conversion, or physical removal of the chemical
from the wastestream being treated.
Source: TRI ONSITE WASTESTREAM
TREATMENT EFFICIENCY EST
Reference: Part II, Section 7A.3.d
89
STREAM 3 - BASED ON
OPERATING DATA?
C
Indicates that the information given in the
EFFICIENCY field is based on operating data.
Value is either Ayes® or Ano@.
Source: TRI ONSITE WASTESTREAM
OPERATING DATA IND
Reference: Part II, Section 7A.3.e
90
STREAM 4 - WASTE
STREAM CODE
C
Provides the indicator that shows the type of general
waste stream containing the reported chemical that
is being treated. Indicator values are as follows:
A = gaseous
W = wastewater
L = liquid waste
S = solid waste
Source: TRI ONSITE WASTESTREAM
WASTESTREAM CODE
Reference: Part II, Section 7A.4a
91
STREAM 4 - TRTMT
METHOD - SEQUENCE 1
c
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.4.b
92
STREAM 4 - TRTMT
METHOD - SEQUENCE 2
c
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.4.b
94
-------
93
STREAM 4 - TRTMT
METHOD - SEQUENCE 3
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.4.b
94
STREAM 4 -TRTMT
METHOD - SEQUENCE 4
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.4.b
95
STREAM 4 - TRTMT
METHOD - SEQUENCE 5
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.4.b
96
STREAM 4 - TRTMT
METHOD - SEQUENCE 6
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.4.b
95
-------
97
STREAM 4 - TRTMT
METHOD - SEQUENCE 7
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.4.b
98
STREAM 4 - TRTMT
METHOD - SEQUENCE 8
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.4.b
99
STREAM 4 - RANGE
INFLUENT CONCENT
C
Provides the code corresponding to the range
concentration of the toxic chemical as it typically
enters the specified waste treatment step or
sequence.
Source: TRI ONSITE WASTESTREAM
INFLUENT CONC RANGE
Reference: Part II, Section 7A.4.C
100
STREAM 4 - TRTMT
EFFICIENCY EST
N
Provides the estimate of the percentage of the toxic
chemical removed from the waste stream through
destruction, biological degradation, chemical
conversion, or physical removal of the chemical
from the wastestream being treated.
Source: TRI ONSITE WASTESTREAM
TREATMENT EFFICIENCY EST
Reference: Part II, Section 7A.4.d
101
STREAM 4 - BASED ON
OPERATING DATA?
C
Indicates that the information
given in the EFFICIENCY field is based on
operating data. Value is either Ayes® or Ano@.
Source: TRI ONSITE WASTESTREAM
OPERATING DATA IND
Reference: Part II, Section 7A.4.e
96
-------
102
STREAM 5 - WASTE
STREAM CODE
C
Provides the indicator that shows the type of general
waste stream containing the reported chemical that
is being treated. Indicator values are as follows:
A = gaseous
W = wastewater
L = liquid waste
S = solid waste
Source: TRI ONSITE WASTESTREAM
WASTESTREAM CODE
Reference: Part II, Section 7A.5a
103
STREAM 5 - TRTMT
METHOD - SEQUENCE 1
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.5.b
104
STREAM 5 - TRTMT
METHOD - SEQUENCE 2
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.5.b
105
STREAM 5 - TRTMT
METHOD - SEQUENCE 3
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.5.b
97
-------
106
STREAM 5 -TRTMT
METHOD - SEQUENCE 4
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.5.b
107
STREAM 5 - TRTMT
METHOD - SEQUENCE 5
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.5.b
108
STREAM 5 - TRTMT
METHOD - SEQUENCE 6
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.5.b
109
STREAM 5 - TRTMT
METHOD - SEQUENCE 7
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.5.b
98
-------
110
STREAM 5 - TRTMT
METHOD - SEQUENCE 8
C
Provides the code corresponding to the treatment
method used on waste stream containing the
reported chemical, regardless of whether the waste
treatment method actually removes the specific
chemical being reported.
Source:
TRI ONSITE WASTE TREATMENT
MET TREATMENT METHOD CODE
Reference: Part II, Section 7A.5.b
111
STREAM 5 - RANGE
INFLUENT CONCENT
C
Provides the code corresponding to the range
concentration of the toxic chemical as it typically
enters the specified waste treatment step or
sequence.
Source: TRI ONSITE WASTESTREAM
INFLUENT CONC RANGE
Reference: Part II, Section 7A.5.C
112
STREAM 5 - TRTMT
EFFICIENCY EST
N
Provides the estimate of the percentage of the toxic
chemical removed from the waste stream through
destruction, biological degradation, chemical
conversion, or physical removal of the chemical
from the wastestream being treated.
Source: TRI ONSITE WASTESTREAM
TREATMENT EFFICIENCY EST
Reference: Part II, Section 7A.5.d
113
STREAM 5 - BASED ON
OPERATING DATA
C
Indicates that the information given in the
EFFICIENCY field is based on operating data.
Value is either Ayes® or Ano@.
Source: TRI ONSITE WASTESTREAM
OPERATING DATA IND
Reference: Part II, Section 7A.5.e
99
-------
3.4 Detailed Transfers Off-Site Data (non-POTW) (Type 3A)
Num.
Field Name
Type
Description
1
TRIFID
C
Facility identification in the format zzzzz-
nnnnn-sssss where usually zzzzz = facility zip
code, nnnnn = first five consonants of the
name, and sssss = first five non-special
characters in the street address.
NOTE: The contents of this field is not
changed to match facility ownership, or zip
code changes. Rather, the TRI Facility ID
identifies a specific geographical location
which is also identified by the latitude and
longitude of that location.
Source: TRUI FACILITY.FACILITY ID
Reference: Part I, Section 4.1
2
DOCUMENT CONTROL
NUMBER
C
Unique identification number assigned to each
submission by EPA. Format:
TTYYMMMNNNNNC, where
TT = document type
YY = reporting year
MMM = document type
NNNNN= sequential number
C = check digit
Source:
TRI REPORTING FORM.DOC CTRL
NUM
Format: (13 + RY + DOC TYPE +
SEQ_NUM + Check digit)
Reference: NA (System generated)
3
CAS NUMBER
C
Chemical Abstracts Service (CAS) Registry
Number for that unique chemical, or category
code (for compounds).
NOTE: CAS number 999999999 is for
sanitized trade secret submissions;
CHEM NAME displays the reported generic
chemical name.
Source:
TRI REPORTING_FORM.TRI CHEM ID
Reference: Part II, Section 1.1
100
-------
Num.
Field Name
Type
Description
4
CLASSIFICATION
C
Indicates the classification of the chemical.
Chemicals can be classified as either a Dioxin
or Dioxin-like compound, a PBT (Persistent,
Bioaccumulative and Toxic) chemical or a
general EPCRA Section 313 chemical.
Values: {TRI, PBT, DIOXIN} where
TRI = General EPCRA Section 313 Chem.
PBT = Bioaccumulative and Toxic
DIOXIN = Dioxin or Dioxin-like compound
Source: TRI CHEM INFO
CLASSIFICATION
Reference: NONE
5
UNIT OF MEASURE
C
Indicates the unit of measure used to quantify
the chemical. Values: {Pounds, Grams}
Source: TRI CHEM INFO
UNIT OF MEASURE
Reference: NONE
6
DIOXIN DISTRIBUTION 1
N
Indicates the percentage of
1,2,3,4,6,7,8 Heptachlorodibenzofuran
(CAS # 67562-39-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 1
Reference: Part II, Section 1.4
7
DIOXIN DISTRIBUTION 2
N
Indicates the percentage of
1,2,3,4,7,8,9 Heptachlorodibenzofuran
(CAS # 55673-89-7) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 2
Reference: Part II, Section 1.4
101
-------
Num.
Field Name
Type
Description
8
DIOXIN DISTRIBUTION 3
N
Indicates the percentage of
1,2,3,4,7,8 Hexachlorodibenzofuran
(CAS # 70648-26-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 3
Reference: Part II, Section 1.4
9
DIOXIN DISTRIBUTION 4
N
Indicates the percentage of
1,2,3,6,7,8 Hexachlorodibenzofuran
(CAS # 57117-44-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 4
Reference: Part II, Section 1.4
10
DIOXIN DISTRIBUTION 5
N
Indicates the percentage of
1,2,3,7,8,9 Hexachlorodibenzofuran
(CAS # 72918-21-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 5
Reference: Part II, Section 1.4
11
DIOXIN DISTRIBUTION 6
N
Indicates the percentage of
2,3,4,6,7,8 Hexachlorodibenzofuran
(CAS # 60851-34-5) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 6
Reference: Part II, Section 1.4
102
-------
Num.
Field Name
Type
Description
12
DIOXIN DISTRIBUTION 7
N
Indicates the percentage of
1,2,3,4,7,8 Hexachlorodibenzo- p-dioxin
(CAS # 39227-28-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 7
Reference: Part II, Section 1.4
13
DIOXIN DISTRIBUTION 8
N
Indicates the percentage of
1,2,3,6,7,8 Hexachlorodibenzo- p-dioxin
(CAS # 5765385-7) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 8
Reference: Part II, Section 1.4
14
DIOXIN DISTRIBUTION 9
N
Indicates the percentage of
1,2,3,7,8,9 Hexachlorodibenzo- p-dioxin
(CAS # 19408-74-3) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 9
Reference: Part II, Section 1.4
15
DIOXIN DISTRIBUTION 10
N
Indicates the percentage of
1,2,3,4,6,7,8 Heptachlorodibenzo- p-dioxin
(CAS # 35822-46-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 10
Reference: Part II, Section 1.4
103
-------
Num.
Field Name
Type
Description
16
DIOXIN DISTRIBUTION 11
N
Indicates the percentage of
1,2,3,4,6,7,8,9 Octachlorodibenzofuran
(CAS # 39001-02-0) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 11
Reference: Part II, Section 1.4
17
DIOXIN DISTRIBUTION 12
N
Indicates the percentage of
1,2,3,4,6,7,8,9 Octachlorodibenzo- p-dioxin
(CAS # 03268-87-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 12
Reference: Part II, Section 1.4
18
DIOXIN DISTRIBUTION 13
N
Indicates the percentage of
1,2,3,7,8 Pentachlorodibenzofuran
(CAS # 57117-41-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 13
Reference: Part II, Section 1.4
19
DIOXIN DISTRIBUTION 14
N
Indicates the percentage of
2,3,4,7,8 Pentachlorodibenzofuran
(CAS # 57117-31-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 14
Reference: Part II, Section 1.4
104
-------
Num.
Field Name
Type
Description
20
DIOXIN DISTRIBUTION 15
N
Indicates the percentage of
1,2,3,7,8 Pentachlorodibenzo- p-dioxin
(CAS # 40321-76-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 15
Reference: Part II, Section 1.4
21
DIOXIN DISTRIBUTION 16
N
Indicates the percentage of
2,3,7,8 Tetrachlorodibenzofuran
(CAS # 51207-31-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 16
Reference: Part II, Section 1.4
22
DIOXIN DISTRIBUTION 17
N
Indicates the percentage of
2,3,78 Tetrachlorodibenzo- p-dioxin
(CAS # 01746-01-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 17
Reference: Part II, Section 1.4
23
REPORTING YEAR
C
The calendar year in which the reported
activities occur.
Source: TRI REPORTING FORM
REPORTING YEAR
Reference: Part I, Section 1
105
-------
Num.
Field Name
Type
Description
24
TRADE SECRET
INDICATOR
C
Indicates whether the reporting facility claims
the identity of the chemical or chemical
category as a trade secret.
Yes = Checked (Trade Secret)
No = Not checked
Note: Only Sanitized Trade Secret submissions
are stored in the TRIS database.
Source: TRI REPORTING FORM.
TRADE SECRET IND
Reference: Part I, Section 2.1
25
FACILITY NAME
C
Name of the reporting facility.
Source: TRI FACILITY.
FACILITY NAME
Reference: Part I, Section 4.1
26
FACILITY STREET
C
Street address of the reporting facility.
Source:
TRIFACILITY.STREETADDRESS
Reference: Part I, Section 4.1
27
FACILITY CITY
C
City in which the reporting facility is located.
Source: TRI FACILITY.CITY NAME
Reference: Parti, Section 4.1
28
FACILITY COUNTY
C
County in which the reporting facility is
located.
Source: TRI_FACILITY.COUNT NAME
Reference: Part I, Section 4.1
29
FACILITY STATE
C
Two-letter state code of the reporting facility.
Source: TRI FACILITY.STATE ABBR
Reference: Part I, Section 4.1
30
FACILITY ZIP CODE
C
ZIP code of the reporting facility.
Source: TRI FACILITY. ZIP CODE
Reference: Part I, Section 4.1
106
-------
Num.
Field Name
Type
Description
31
ENTIRE FACILITY IND
C
Indicates whether the information covers an
entire facility or part of a facility.
Yes = entire
No = partial
Source:
TRIREPORTINGFORM.ENTIREFAC
Reference: Part I, Section 4.2a
32
PARTIAL FACILITY IND
C
Indicates whether the information covers an
entire facility or part of a facility.
Yes = entire
No = partial
Source: TRI REPORTING FORM.
PARTIAL FAC
Reference: Part I, Section 4.2b
33
FEDERAL FACILITY IND
C
Code indicating whether a facility is Federal or
not.
Yes = Federal
No = non-Federal or GOCO
Source:
TRI REPORTING FORM.FEDERAL FA
C IND
Form R: Part I Section 4.2c
34
GOCO FACILITY IND
C
Code indicating whether a facility is GOCO
(Government-Owned, Contractor-Operated)
facility or not:
Yes = GOCO
No = non-GOCO
Source: TRI REPORTING FORM GOCO
FLAG
Form R: Part I Section 4.2d
35
PRIMARY SIC CODE
C
Primary four-digit Standard Industrial
Classification (SIC) Code.
Source:
TRISUBMISSIONSIC. SICC ODE
Reference: Part I, Section 4.5a
107
-------
Num.
Field Name
Type
Description
36
SIC CODE 2
C
Second four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5b
37
SIC CODE 3
C
Third four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5c
38
SIC CODE 4
C
Fourth four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5d
39
SIC CODE 5
C
Fifth four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5e
40
SIC CODE 6
C
Sixth four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5f
41
LATITUDE
N
Reported latitude of the reporting facility
converted into decimal degrees (Format:
signed 2 digit whole number, 6 digit decimal
positions +nn nnnnnn)
Source: TRI FACILITY.FAC LATITUDE
Reference: Part I, Section 4.6
42
LONGITUDE
N
Reported longitude of the reporting facility
converted into decimal degrees. (Format:
signed 3 digit whole number, 6 digit decimal
positions +nnn.nnnnnn).
Source:
TRI FACILITY.FAC LONGITUDE
Reference: Part I, Section 4.6
108
-------
Num.
Field Name
Type
Description
43
D&BNRA
C
Unique identification number assigned by Dun
and Bradstreet to the reporting facility.
Source: TRI FACILITY DB DB NUM
Reference: Part I, Section 4.7a
44
D&B NR B
C
Unique identification number assigned by Dun
and Bradstreet to the reporting facility.
Source: TRI FACILITY DB DB NUM
Reference: Part I, Section 4.7b
45
RCRA NR A
C
Twelve-digit alphanumeric identifier assigned
by EPA under the resource Conservation and
Recovery Act.
Source:
TRI FACILITY RCRA RCRA NUM
Reference: Part I, Section 4.8a
46
RCRA NR B
C
Twelve-digit alphanumeric identifier assigned
by EPA under the resource Conservation and
Recovery Act.
Source:
TRI FACILITY RCRA RCRA NUM
Reference: Part I, Section 4.8b
47
NPDES NR A
C
Nine-digit alphanumeric identifier assigned to
a facility under EPA's National Pollutant
Discharge Elimination System.
Source:
TRI FACILITY NPDES.NPDES NUM
Reference: Part I, Section 4.9a
48
NPDES NR B
C
Nine-digit alphanumeric identifier assigned to
a facility under EPA's National Pollutant
Discharge Elimination System.
Source:
TRI FACILITY NPDES.NPDES NUM
Reference: Part I, Section 4.9b
49
UIC NR A
C
Underground injection identification number,
assigned by EPA or the state, to a facility
which injects chemical waste into class I wells.
Source: TRI_FACILITY_UIC.UIC_NUM
Reference: Part I, Section 4.10a
109
-------
Num.
Field Name
Type
Description
50
UIC NR B
C
Underground injection identification number,
assigned by EPA or the state, to a facility
which injects chemical waste into class II to V
wells.
Source: TRI FACILITY UIC.UIC NUM
Reference: Part I, Section 4.10b
51
PARENT COMPANY
NAME
C
Name of the corporation or other business
entity that owns or controls the reporting
facility.
Source: TRI FACILITY.PARENT CO
NAME
Reference: Part I, Section 5.1
52
PARENT COMPANY D&B
NR
C
Unique identification number assigned by Dun
and Bradstreet to the parent company of the
reporting facility.
Source: TRI FACILITY.PARENT CO
DB NUM
Reference: Part I, Section 5.2
53
OFF-SITE RCRA ID NR
C
The identification number assigned to the off-
site disposal facility covered by regulations of
the resource Conservation and Recovery Act
(RCRA) and other regulations of the
Superfund Act (CERCLA).
Source:
TRI OFF SITE TRANSFER LOCATIO
N.RCRA NUM
Reference: Part II, Section 6.2
54
OFF-SITE TRANSFER
SEQUENCE NUMBER
C
This field contains a sequence number
assigned to an off-site location.
Source:
TRI OFF SITE TRANSFER LOCATIO
N.
TRANSFER LOC NUM
Reference: NA (System generated)
110
-------
Num.
Field Name
Type
Description
55
OFF-SITE NAME
C
The name of the off-site treatment or disposal
location to which the chemical is sent.
Source:
TRI OFF SITE TRANSFER LOCATIO.
OFF SITE NAME
Reference: Part II, Section 6.2
56
OFF-SITE STREET
ADDRESS
C
The address of the off-site disposal or
treatment facility.
Source:
TRI OFF SITE TRANSFER LOCATIO
N.
OFFSITESTREET
Reference: Part II, Section 6.2
57
OFF-SITE CITY
C
The city in which the off-site transfer or
disposal site is located.
Source:
TRI OFF SITE TRANSFER LOCATIO
N.
CITY NAME
Reference: Part II, Section 6.2
58
OFF-SITE COUNTY
C
The county in which the off-site treatment or
disposal site is located.
Source:
TRI OFF SITE TRANSFER LOCATIO
N.
COUNTY NAME
Reference: Part II, Section 6.2
59
OFF-SITE STATE
C
The two-letter state abbreviation of the off-site
treatment or disposal site.
Source:
TRI OFF SITE TRANSFER LOCATIO
N. STATE ABBR
Reference: Part II, Section 6.2
111
-------
Num.
Field Name
Type
Description
60
OFF-SITE PROVINCE
C
Province of the reporting facility's mailing
address.
Source:
TRI OFF SITE TRANSFER LOCATIO
N.PROVINCE
Reference: Part I, Section 4.1
61
OFF-SITE ZIPCODE
C
The zip code used in the address of an off-site
treatment or disposal site.
Source:
TRI OFF SITE TRANSFER LOCATIO
N.
ZIP CODE
Reference: Part II, Section 6.2
62
OFF-SITE COUNTRY ID
C
If the off-site facility is out of the country, this
field contains the name of the country to which
the transfer is sent.
Source:
TRI OFF SITE TRANSFER LOCATIO
N.COUNTRY CODE
Reference: Part II, Section 6.2
63
OFF-SITE CONTROL
C
This field indicates whether the off-site
location to which toxic chemical wastes are
transferred is owned or controlled by the
facility or parent company. Value is Ayes® or
flno@.
Source:
TRI OFF SITE TRANSFER LOCATIO
N.
CONTROLLED LOC
Reference: Part II, Section 6.2
64
XFERS OFF-SITE POUNDS
- STORAGE M10
N
An estimate of the total quantity in pounds of
reported chemical contained in the waste
transferred to off-site facilities for storage
(M10). Range codes may be used for transfers
of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
112
-------
Num.
Field Name
Type
Description
65
XFERS OFF-SITE RANGE
CODE- STORAGE M10
C
Code used to indicate the amount of the toxic
chemical transferred to off-site facilities for
storage (M10) within a range. If none, the
submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
66
TOTAL XFERS OFF-SITE
AMOUNT- STORAGE M10
N
System generated total quantity in pounds of
reported chemical contained in the waste
transferred to off-site facilities for storage
(M10). If field number 64 is not blank, its
contents are used as the total. If it is blank, the
middle of the range for the code used in field
number 65 is used for the total value.
Source:
TRI TRANSFER QTY.TRANSFER
TOTAL or TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
67
BASIS OF ESTIMATE M10
C
Code indicating the principal method by which
the total storage estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
113
-------
Num.
Field Name
Type
Description
68
XFERS OFF-SITE POUNDS
SOLIDIFICATION/STABILI
ZATION (METALS) M41
N
An estimate of the total quantity in pounds of
reported chemical contained in the waste
transferred to off-site facilities for
solidification/stabilization (metals) (M41).
Range codes may be used for transfers of less
than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
69
XFERS OFF-SITE RANGE
CODE-
SOLIDIFICATION/STABILI
ZATION (METALS) M41
C
The code used to indicate the amount of the
toxic chemical transferred to off-site facilities
for solidification/stabilization (metals) (M41)
within a range. If none, the submitter enters
zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
70
TOTAL XFERS OFF-SITE
AMOUNT -
SOLIDIFICATION/STABILI
ZATION (METALS) M41
N
System generated total quantity in pounds of
reported chemical contained in the waste
transferred to off-site facilities for
solidification/stabilization (metals) (M41). If
field number 68 is not blank, its contents are
used as the total. If it is blank, the middle of
the range for the code used in field number 69
is used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
114
-------
Num.
Field Name
Type
Description
71
BASIS OF ESTIMATE M41
C
Code indicating the principal method by
which the total solidification/stabilization
(metals) estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source:
TRI TRANSFER QTY.TRANSFER BASI
S_EST CODE
Reference: Part II, Section 6.2B
72
XFERS OFF-SITE POUNDS
- WASTEWATER TRTMT
(METALS) M62
N
An estimate of the total quantity in pounds of
reported chemical contained in the waste
transferred to off-site wastewater treatment
(metals) (M62). Range codes may be used for
transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
73
XFERS OFF-SITE RANGE
CODE - WASTEWATER
TRTMT (METALS) M62
C
Code used to indicate the amount of the toxic
chemical transferred to off-site wastewater
treatment (metals) (M62) within a range. If
none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
115
-------
Num.
Field Name
Type
Description
74
TOTAL XFERS OFF-SITE
AMOUNT -
WASTEWATER TRTMT
(METALS) M62
N
System generated total quantity in pounds of
reported chemical contained in the waste
transferred to off-site wastewater treatment
(metals) (M62). If field number 72 is not
blank, its contents are used as the total. If it is
blank, the middle of the range for the code
used in field number 73 is used for the total
value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
75
BASIS OF ESTIMATE M62
C
Code indicating the principal method by
which the total wastewater treatment (metals)
(M62) estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
76
XFERS OFF-SITE
UNDERGROUND
INJECTION POUNDS M71
N
An estimate of the total quantity in pounds of
reported chemical contained in the waste
transferred to off-site underground injection
(M71). Range codes may be used for transfers
of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
116
-------
Num.
Field Name
Type
Description
77
XFERS OFF-SITE
UNDERGROUND
INJECTION RANGE CODE
M71
C
Code used to indicate the amount of the toxic
chemical transferred to off-site underground
injection (M71) within a range. If none, the
submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
78
TOTAL UNDERGROUND
INJECTION AMOUNT M71
N
System generated total quantity in pounds of
reported chemical contained in the waste
transferred to off-site underground injection
(M71). If field number 76 is not blank, its
contents are used as the total. If it is blank, the
middle of the range for the code used in field
number 77 is used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
79
BASIS OF ESTIMATE M71
C
Code indicating the principal method by
which the total underground injection (M71)
estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
117
-------
Num.
Field Name
Type
Description
80
XFERS OFF-SITE
LANDFILLS/DISPOSAL
SURFACE
IMPOUNDMENT POUNDS
M72
N
An estimate of the total quantity in pounds of
reported chemical contained in the waste
transferred to landfill/disposal surface
impoundment ponds (M72). Range codes may
be used for transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
81
XFERS OFF-SITE
LANDFILLS/DISPOSAL
SURFACE
IMPOUNDMENT RANGE
CODE M72
C
Code used to indicate the amount of the toxic
chemical transferred to landfill/disposal surface
impoundment ponds (M72) within a range. If
none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
82
TOTAL
LANDFILLS/DISPOSAL
SURFACE
IMPOUNDMENT
AMOUNT M72
N
System generated total quantity in pounds of
reported chemical contained in the waste
transferred to landfill/disposal surface
impoundment ponds (M72). If field number
81 is not blank, its contents are used as the
total. If it is blank, the middle of the range for
the code used in field number 82 is used for
the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
118
-------
Num.
Field Name
Type
Description
83
BASIS OF ESTIMATE M72
C
Code indicating the principal method by
which the total landfill/disposal surface
impoundment ponds (M72) estimate is
calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
84
LAND TREATMENT
POUNDS M73
N
An estimate of the total quantity in pounds of
reported chemical contained in the waste
subjected to land treatment (M73). Range
codes may be used for transfers of less than
1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
85
LAND TREATMENT
RANGE CODE M73
C
Code used to indicate the amount of the toxic
chemical subjected to land treatment (M73)
within a range. If none, the submitter enters
zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
119
-------
Num.
Field Name
Type
Description
86
TOTAL LAND
TREATMENT TOTAL
AMOUNT M73
N
System generated total quantity in pounds of
reported chemical contained in the waste
subjected to land treatment (M73). If field
number 84 is not blank, its contents are used as
the total. If it is blank, the middle of the range
for the code used in field number 85 is used for
the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
87
BASIS OF ESTIMATE M73
C
Code indicating the principal method by
which the total land treatment (M73) estimate
is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
88
OTHER LAND DISPOSAL
POUNDS M79
N
An estimate of the total quantity in pounds of
reported chemical contained in the waste
subjected to other land disposal (M79). Range
codes may be used for transfers of less than
1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
120
-------
Num.
Field Name
Type
Description
89
OTHER LAND DISPOSAL
RANGE CODE M79
C
Code used to indicate the amount of the toxic
chemical subjected to other land disposal
(M79) within a range. If none, the submitter
enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
90
TOTAL OTHER LAND
DISPOSAL AMOUNT M79
N
System generated total quantity in pounds of
reported chemical subjected to other land
disposal (M79). If field number 88 is not
blank, its contents are used as the total. If it is
blank, the middle of the range for the code
used in field number 89 is used for the total
value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
91
BASIS OF ESTIMATE M79
C
Code indicating the principal method by
which the total other land disposal (M79)
estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
92
OTHER OFF-SITE
MANAGEMENT POUNDS
M90
N
An estimate of the total quantity in pounds of
reported chemical subjected to other off-site
management (M90). Range codes may be used
for transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
121
-------
Num.
Field Name
Type
Description
93
OTHER OFF-SITE
MANAGEMENT RANGE
CODE M90
C
Code used to indicate the amount of the toxic
chemical subjected to other off-site
management (M90) within a range. If none,
the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
94
TOTAL OTHER OFF-SITE
MANAGEMENT AMOUNT
M90
N
System generated total quantity in pounds of
reported chemical contained in the waste
subjected to other off-site management (M90).
If field number 92 is not blank, its contents are
used as the total. If it is blank, the middle of
the range for the code used in field number 93
is used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
95
BASIS OF ESTIMATE M90
C
Code indicating the principal method by
which the total other off-site management
(M90) estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
96
TRANSFER TO WASTE
BROKER-DISPOSAL
POUNDS M94
N
An estimate of the total quantity in pounds of
reported chemical subjected to waste broker
disposal (M94). Range codes may be used for
transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
122
-------
Num.
Field Name
Type
Description
97
TRANSFER TO WASTE
BROKER-DISPOSAL
RANGE CODE M94
C
Code used to indicate the amount of the toxic
chemical subjected to waste broker disposal
(M94) within a range. If none, the submitter
enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
98
TOTAL TRANSFER TO
WASTE BROKER-
DISPOSAL AMOUNT M94
N
System generated total quantity in pounds of
reported chemical contained in the waste
subjected to waste broker disposal (M94). If
field number 96 is not blank, its contents are
used as the total. If it is blank, the middle of
the range for the code used in field number 97
is used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
99
BASIS OF ESTIMATE M94
C
Code indicating the principal method by which
the total waste broker disposal (M94) estimate
is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
O = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
100
UNKNOWN POUNDS M99
N
An estimate of the total quantity in pounds of
reported chemical transported off-site for
unknown processing (M99). Range codes may
be used for transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
123
-------
Num.
Field Name
Type
Description
101
UNKNOWN RANGE CODE
M99
C
Code used to indicate the amount of the toxic
chemical transported off-site for unknown
processing (M99) within a range. If none, the
submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
102
TOTAL UNKNOWN
AMOUNT M99
N
System generated total quantity in pounds of
reported chemical transported off-site for
unknown processing (M99). If field number
100 is not blank, its contents are used as the
total. If it is blank, the middle of the range for
the code used in field number 101 is used for
the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
103
BASIS OF ESTIMATE M99
C
Code indicating the principal method by
which the unknown processing (M99) estimate
is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
O = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
104
TOTAL AMOUNT
TRANSFERRED OFF-SITE
FOR DISPOSAL
N
Total, in pounds, of toxic chemical reported
transferred off-site for disposal. Sum of
columns
(66+70+74+78+82+86+90+94+98+102) .
Source: System generated
Reference: None
124
-------
Num.
Field Name
Type
Description
105
XFERS OFF-SITE POUNDS
- SOLIDIFICATION/
STABILIZATION M40
N
An estimate of the total quantity in pounds of
reported chemical transported off-site for
solidification/stabilization (M40). Range
codes may be used for transfers of less than
1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
106
XFERS OFF-SITE RANGE
CODE - SOLIDIFICATION/
STABILIZATION M40
C
Code used to indicate the amount of the toxic
chemical transported off-site for solidification/
stabilization (M40) within a range. If none, the
submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
107
TOTAL XFERS OFF-SITE
AMOUNT -
SOLIDIFICATION/STABILI
ZATION M40
N
System generated total quantity in pounds of
reported chemical transported off-site for
solidification/stabilization (M40). If field
number 105 is not blank, its contents are used
as the total. If it is blank, the middle of the
range for the code used in field number 106 is
used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
125
-------
Num.
Field Name
Type
Description
108
BASIS OF ESTIMATE M40
C
Code indicating the principal method by which
the total off-site solidification/stabilization
(M40) is measured.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
109
XFERS OFF-SITE POUNDS
- INCINERATION/
THERMAL TREATMENT
M50
N
An estimate of the total quantity in pounds of
reported chemical transported off-site for
incineration/thermal treatment (M50). Range
codes may be used for transfers of less than
1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
110
XFERS OFF-SITE RANGE
CODE - INCINERATION/
THERMAL TREATMENT
M50
C
Code used to indicate the amount of the toxic
chemical transported off-site for
incineration/thermal treatment (M50) within a
range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
126
-------
Num.
Field Name
Type
Description
Ill
TOTAL XFERS OFF-SITE
AMOUNT -
INCINERATION/
THERMAL TREATMENT
M50
N
System generated total quantity in pounds of
reported chemical transported off-site for
incineration/thermal treatment (M50). If field
number 109 is not blank, its contents are used
as the total. If it is blank, the middle of the
range for the code used in field number 110 is
used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
112
BASIS OF ESTIMATE M50
C
Code indicating the principal method by which
the off-site incineration/thermal treatment
(M50) estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
113
XFERS OFF-SITE POUNDS
- INCINERATION/
INSIGNIFICANT FUEL
VALUE M54
N
An estimate of the total quantity in pounds of
reported chemical transported off-site for
incineration/insignificant fuel value (M54).
Range codes may be used for transfers of less
than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
127
-------
Num.
Field Name
Type
Description
114
XFERS OFF-SITE RANGE
CODE - INCINERATION/
INSIGNIFICANT FUEL
VALUE M54
C
Code used to indicate the amount of the toxic
chemical transported off-site for incineration/
insignificant fuel value (M54) within a range.
If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
115
TOTAL XFERS OFF-SITE
AMOUNT -
INCINERATION/
INSIGNIFICANT FUEL
VALUE M54
N
System generated total quantity in pounds of
reported chemical transported off-site for
incineration/insignificant fuel value (M54). If
field number 113 is not blank, its contents are
used as the total. If it is blank, the middle of
the range for the code used in field number 114
is used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
116
BASIS OF ESTIMATE M54
C
Code indicating the principal method by which
the transported off-site for incineration/
insignificant fuel value (M54) estimate is
calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
128
-------
Num.
Field Name
Type
Description
117
XFERS OFF-SITE POUNDS
- WASTEWATER
TREATMENT
(EXCLUDING POTW) M61
N
An estimate of the total quantity in pounds of
reported chemical contained in the waste
transferred to off-site wastewater treatment
(excluding POTW) (M61). Range codes may
be used for transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A1
118
XFERS OFF-SITE RANGE
CODE - WASTEWATER
TREATMENT M61
C
Code used to indicate the amount of the toxic
chemical transferred to off-site wastewater
treatment (excluding POTW) (M61) within a
range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A1
119
TOTAL XFERS OFF-SITE
AMOUNT -
WASTEWATER
TREATMENT M61
N
System generated total quantity in pounds of
reported chemical contained in the waste
transferred to off-site wastewater treatment
(excluding POTW) (M61). If field number
117 is not blank, its contents are used as the
total. If it is blank, the middle of the range for
the code used in field number 118 is used for
the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
129
-------
Num.
Field Name
Type
Description
120
BASIS OF ESTIMATE M61
C
Code indicating the principal method by
which the total wastewater treatment
(excluding POTW) (M61) estimate is
calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
121
XFERS OFF-SITE POUNDS
-OTHER WASTE
TREATMENT M69
N
An estimate of the total quantity in pounds of
reported chemical subjected to other off-site
waste treatment (M69). Range codes may be
used for transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
122
XFERS OFF-SITE RANGE
CODE - OTHER WASTE
TREATMENT M69
C
Code used to indicate the amount of the toxic
chemical subjected to other off-site waste
treatment (M69) within a range. If none, the
submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
130
-------
Num.
Field Name
Type
Description
123
TOTAL XFERS OFF-SITE
AMOUNT - OTHER
WASTE TREATMENT M69
N
System generated total quantity in pounds of
reported chemical contained in the waste
subjected to other off-site waste treatment
(M69). If field number 121 is not blank, its
contents are used as the total. If it is blank, the
middle of the range for the code used in field
number 122 is used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
124
BASIS OF ESTIMATE M69
C
Code indicating the principal method by
which the total other off-site waste treatment
(M69) estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
125
XFERS OFF-SITE POUNDS
- TRANSFER TO WASTE
BROKER-WASTE
TREATMENT M95
N
An estimate of the total quantity in pounds of
reported chemical subjected to waste broker for
treatment (M95). Range codes may be used
for transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
126
XFERS OFF-SITE RANGE
CODE - TRANSFER TO
WASTE BROKER-WASTE
TREATMENT M95
C
Code used to indicate the amount of the toxic
chemical subjected to waste broker for
treatment (M95) within a range. If none, the
submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
131
-------
Num.
Field Name
Type
Description
127
TOTAL XFERS OFF-SITE
AMOUNT - TRANSFER TO
WASTE BROKER-WASTE
TREATMENT M95
N
System generated total quantity in pounds of
reported chemical contained in the waste
subjected to waste broker for treatment (M95).
If field number 125 is not blank, its contents
are used as the total. If it is blank, the middle
of the range for the code used in field number
126 is used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
128
BASIS OF ESTIMATE M95
C
Code indicating the principal method by
which the total waste broker disposal (M94)
estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
129
TOTAL AMOUNT
TRANSFERRED OFF-SITE
FOR TREATMENT
N
Total, in pounds, of toxic chemical reported
transferred off-site for treatment. Sum of
columns (107+111+115+119+123+127).
Source: System generated
Reference: None
130
XFERS OFF-SITE POUNDS
- ENERGY RECOVERY
M56
N
An estimate of the total quantity in pounds of
reported chemical sent off-site for energy
recovery (M56). Range codes may be used for
transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
132
-------
Num.
Field Name
Type
Description
131
XFERS OFF-SITE RANGE
CODE -ENERGY
RECOVERY M56
C
Code used to indicate the amount of the toxic
chemical sent off-site for energy recovery
(M56) within a range. If none, the submitter
enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
132
TOTAL XFERS OFF-SITE
AMOUNT - ENERGY
RECOVERY M56
N
System generated total quantity in pounds of
reported chemical contained in the waste sent
off-site for energy recovery (M56). If field
number 130 is not blank, its contents are used
as the total. If it is blank, the middle of the
range for the code used in field number 131 is
used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
133
BASIS OF ESTIMATE M56
C
Code indicating the principal method by
which the amount sent off-site for energy
recovery (M56) estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
134
XFERS OFF-SITE POUNDS
- TRANSFER TO WASTE
BROKER-ENERGY
RECOVERY M92
N
An estimate of the total quantity in pounds of
reported chemical sent to a waste broker for
energy recovery (M92). Range codes may be
used for transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
133
-------
Num.
Field Name
Type
Description
135
XFERS OFF-SITE RANGE
CODE - TRANSFER TO
WASTE BROKER-
ENERGY RECOVERY
M92
C
Code used to indicate the amount of the toxic
chemical sent to a waste broker for energy
recovery (M92) within a range. If none, the
submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
136
TOTAL XFERS OFF-SITE
AMOUNT - TRANSFER TO
WASTE-BROKER-
ENERGY RECOVERY M92
N
System generated total quantity in pounds of
reported chemical sent to a waste broker for
energy recovery (M92). If field number 134 is
not blank, its contents are used as the total. If
it is blank, the middle of the range for the code
used in field number 135 is used for the total
value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
137
BASIS OF ESTIMATE M92
C
Code indicating the principal method by which
the amount sent to a waste broker for energy
recovery (M92) estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
138
TOTAL AMOUNT
TRANSFERRED OFF-SITE
FOR ENERGY RECOVERY
N
Total, in pounds, of toxic chemical reported
transferred off-site for energy recovery (132 +
136).
Source: System generated
Reference: None
134
-------
Num.
Field Name
Type
Description
139
XFERS OFF-SITE POUNDS
- SOLVENTS/ORGANICS
RECOVERY M20
N
An estimate of the total quantity in pounds of
reported chemical sent off-site for solvents/
organics recovery (M20). Range codes may
be used for transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
140
XFERS OFF-SITE RANGE
CODE-
SOLVENTS/ORGANICS
RECOVERY M20
C
Code used to indicate the amount of the toxic
chemical sent off-site for solvents/organics
recovery (M20) within a range. If none, the
submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
141
TOTAL XFERS OFF-SITE
AMOUNT -
SOLVENTS/ORGANICS
RECOVERY M20
N
System generated total quantity in pounds of
reported chemical contained in the waste off-
site for solvents/organics recovery (M20). If
field number 139 is not blank, its contents are
used as the total. If it is blank, the middle of
the range for the code used in field number 140
is used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
142
BASIS OF ESTIMATE M20
C
Code indicating the principal method by which
the amount sent off-site for solvents/ organics
recovery (M20) estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
O = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
135
-------
Num.
Field Name
Type
Description
143
XFERS OFF-SITE POUNDS
-METALS RECOVERY
M24
N
An estimate of the total quantity in pounds of
reported chemical sent off-site for metals
recovery (M24). Range codes may be used for
transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
144
XFERS OFF-SITE RANGE
CODE - METALS
RECOVERY M24
C
Code used to indicate the amount of the toxic
chemical sent off-site for metals recovery
(M24) within a range. If none, the submitter
enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
145
TOTAL XFERS OFF-SITE
AMOUNT - METALS
RECOVERY M24
N
System generated total quantity in pounds of
reported chemical contained in the waste off-
site for off-site for metals recovery (M24). If
field number 143 is not blank, its contents are
used as the total. If it is blank, the middle of
the range for the code used in field number 144
is used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
146
BASIS OF ESTIMATE M24
C
Code indicating the principal method by which
the amount sent off-site for metals recovery
(M24) estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
O = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
136
-------
Num.
Field Name
Type
Description
147
XFERS OFF-SITE POUNDS
- OTHER REUSE OR
RECOVERY M26
N
An estimate of the total quantity in pounds of
reported chemical sent off-site for other reuse
or recovery (M26). Range codes may be used
for transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
148
XFERS OFF-SITE RANGE
CODE - OTHER REUSE OR
RECOVERY M26
C
This field provides the code used to indicate
the amount of the toxic chemical sent off-site
for other reuse or recovery (M26) within a
range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
149
TOTAL XFERS OFF-SITE
AMOUNT - OTHER REUSE
OR RECOVERY M26
N
System generated total quantity in pounds of
reported chemical contained in the waste off-
site for other reuse or recovery (M26). If field
number 147 is not blank, its contents are used
as the total. If it is blank, the middle of the
range for the code used in field number 148 is
used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
150
BASIS OF ESTIMATE M26
C
Code indicating the principal method by which
the amount sent off-site for other reuse or
recovery (M26) estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
O = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
137
-------
Num.
Field Name
Type
Description
151
XFERS OFF-SITE POUNDS
- ACID REGENERATION
M28
N
An estimate of the total quantity in pounds of
reported chemical sent off-site for acid
regeneration (M28). Range codes may be used
for transfers of less than 1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
152
XFERS OFF-SITE RANGE
CODE - ACID
REGENERATION M28
C
Code used to indicate the amount of the toxic
chemical sent off-site for acid regeneration
(M28) within a range. If none, the submitter
enters zero.
A = 1-10
B = 11-499
C = 500-999
Source:
TRI TRANSFER QTY.POUND RANGE
CODE
Reference: Part II, Section 6.2A
153
TOTAL XFERS OFF-SITE
AMOUNT - ACID
REGENERATION M28
N
System generated total quantity in pounds of
reported chemical contained in the waste off-
site for acid regeneration (M28). If field
number 151 is not blank, its contents are used
as the total. If it is blank, the middle of the
range for the code used in field number 152 is
used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
138
-------
Num.
Field Name
Type
Description
154
BASIS OF ESTIMATE M28
C
Code indicating the principal method by which
the amount sent off-site for acid regeneration
(M28) estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
155
XFERS OFF-SITE POUNDS
- TRANSFER TO WASTE
BROKER-RECYCLING
M93
N
An estimate of the total quantity transferred to
a waste broker for recycling (M93). Range
codes may be used for transfers of less than
1000 lbs.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER
Reference: Part II, Section 6.2A
156
XFERS OFF-SITE RANGE
CODE - TRANSFER TO
WASTE BROKER-
RECYCLING M93
C
Code used to indicate the amount of the toxic
chemical transferred to a waste broker for
recycling (M93) within a range. If none, the
submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: Part II, Section 6.2A
157
TOTAL XFERS OFF-SITE
AMOUNT - TRANSFER TO
WASTE BROKER-
RECYCLING M93
N
System generated total quantity in pounds of
reported chemical contained in the waste
transferred to a waste broker for recycling
(M93). If field number 155 is not blank, its
contents are used as the total. If it is blank, the
middle of the range for the code used in field
number 156 is used for the total value.
Source: TRI TRANSFER QTY.
TOTAL TRANSFER or
TRI TRANSFER QTY.
TRANSFER RANGE CODE
Reference: NA (system generated)
139
-------
Num.
Field Name
Type
Description
158
BASIS OF ESTIMATE M93
C
Code indicating the principal method by which
the amount transferred to a waste broker for
recycling (M93) estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source: TRI TRANSFER QTY.
TRANSFER BASIS EST CODE
Reference: Part II, Section 6.2B
159
TOTAL AMOUNT
TRANSFERRED OFF-SITE
FOR RECYCLING
N
Total, in pounds, of toxic chemical reported
transferred off-site for recycling. Sum of
Columns (141 + 145 + 149 + 153 + 157).
Source: System generated
Reference: None
140
-------
3.5 Detailed Transfers Off-Site Data (POTWs) (Type 3B)
Num.
Field Name
Type
Description
1
TRIFID
C
Facility identification in the format zzzzz-
nnnnn-sssss where usually zzzzz = facility zip
code, nnnnn = first five consonants of the
name, and sssss = first five non-special
characters in the street address.
NOTE: The contents of this field is not
changed to match facility ownership, or zip
code changes. Rather, the TRI Facility ID
identifies a specific geographical location
which is also identified by the latitude and
longitude of that location.
Source: TRI FACILITY.FACILITY ID
Reference: Part I, Section 4.1
2
DOCUMENT CONTROL
NUMBER
C
Unique identification number assigned to each
submission by EPA. Format:
TTYYMMMNNNNNC, where
TT = document type
YY = reporting year
MMM = document type
NNNNN= sequential number
C = check digit
Source: TRI REPORTING FORM
DOC CTRL NUM
Format: (13 + RY + DOC TYPE +
SEQ_NUM + Check digit)
Reference: NA (System generated)
3
CAS NUMBER
C
Chemical Abstracts Service (CAS) Registry
Number for that unique chemical, or category
code (for compounds).
NOTE: CAS number 999999999 is for
sanitized trade secret submissions;
CHEM NAME displays the reported generic
chemical name.
Source:
TRI REPORTING_FORM.TRI CHEM ID
Reference: Part II, Section 1.1
141
-------
Num.
Field Name
Type
Description
4
CLASSIFICATION
C
Indicates the classification of the chemical.
Chemicals can be classified as either a Dioxin
or Dioxin-like compound, a PBT (Persistent,
Bioaccumulative and Toxic) chemical or a
general EPCRA Section 313 chemical.
Values: {TRI, PBT, DIOXIN} where
TRI = General EPCRA Section 313 Chem.
PBT = Bioaccumulative and Toxic
DIOXIN = Dioxin or Dioxin-like compound
Source: TRI CHEM INFO
CLASSIFICATION
Reference: NONE
5
UNIT OF MEASURE
C
Indicates the unit of measure used to quantify
the chemical. Values: {Pounds, Grams}
Source: TRI CHEM INFO
UNIT OF MEASURE
Reference: NONE
6
DIOXIN DISTRIBUTION 1
N
Indicates the percentage of
1,2,3,4,6,7,8 Heptachlorodibenzofuran
(CAS # 67562-39-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 1
Reference: Part II, Section 1.4
7
DIOXIN DISTRIBUTION 2
N
Indicates the percentage of
1,2,3,4,7,8,9 Heptachlorodibenzofuran
(CAS # 55673-89-7) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 2
Reference: Part II, Section 1.4
142
-------
Num.
Field Name
Type
Description
8
DIOXIN DISTRIBUTION 3
N
Indicates the percentage of
1,2,3,4,7,8 Hexachlorodibenzofuran
(CAS # 70648-26-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 3
Reference: Part II, Section 1.4
9
DIOXIN DISTRIBUTION 4
N
Indicates the percentage of
1,2,3,6,7,8 Hexachlorodibenzofuran
(CAS # 57117-44-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 4
Reference: Part II, Section 1.4
10
DIOXIN DISTRIBUTION 5
N
Indicates the percentage of
1,2,3,7,8,9 Hexachlorodibenzofuran
(CAS # 72918-21-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 5
Reference: Part II, Section 1.4
11
DIOXIN DISTRIBUTION 6
N
Indicates the percentage of
2,3,4,6,7,8 Hexachlorodibenzofuran
(CAS # 60851-34-5) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 6
Reference: Part II, Section 1.4
143
-------
Num.
Field Name
Type
Description
12
DIOXIN DISTRIBUTION 7
N
Indicates the percentage of
1,2,3,4,7,8 Hexachlorodibenzo- p-dioxin
(CAS # 39227-28-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 7
Reference: Part II, Section 1.4
13
DIOXIN DISTRIBUTION 8
N
Indicates the percentage of
1,2,3,6,7,8 Hexachlorodibenzo- p-dioxin
(CAS # 5765385-7) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 8
Reference: Part II, Section 1.4
14
DIOXIN DISTRIBUTION 9
N
Indicates the percentage of
1,2,3,7,8,9 Hexachlorodibenzo- p-dioxin
(CAS # 19408-74-3) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 9
Reference: Part II, Section 1.4
15
DIOXIN DISTRIBUTION 10
N
Indicates the percentage of
1,2,3,4,6,7,8 Heptachlorodibenzo- p-dioxin
(CAS # 35822-46-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 10
Reference: Part II, Section 1.4
144
-------
Num.
Field Name
Type
Description
16
DIOXIN DISTRIBUTION 11
N
Indicates the percentage of
1,2,3,4,6,7,8,9 Octachlorodibenzofuran
(CAS # 39001-02-0) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 11
Reference: Part II, Section 1.4
17
DIOXIN DISTRIBUTION 12
N
Indicates the percentage of
1,2,3,4,6,7,8,9 Octachlorodibenzo- p-dioxin
(CAS # 03268-87-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 12
Reference: Part II, Section 1.4
18
DIOXIN DISTRIBUTION 13
N
Indicates the percentage of
1,2,3,7,8 Pentachlorodibenzofuran
(CAS # 57117-41-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 13
Reference: Part II, Section 1.4
19
DIOXIN DISTRIBUTION 14
N
Indicates the percentage of
2,3,4,7,8 Pentachlorodibenzofuran
(CAS # 57117-31-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 14
Reference: Part II, Section 1.4
145
-------
Num.
Field Name
Type
Description
20
DIOXIN DISTRIBUTION 15
N
Indicates the percentage of
1,2,3,7,8 Pentachlorodibenzo- p-dioxin
(CAS # 40321-76-4) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source-. TRI REPORTING FORM
DIOXIN DISTRIBUTION 15
Reference: Part II, Section 1.4
21
DIOXIN DISTRIBUTION 16
N
Indicates the percentage of
2,3,7,8 Tetrachlorodibenzofuran
(CAS # 51207-31-9) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 16
Reference: Part II, Section 1.4
22
DIOXIN DISTRIBUTION 17
N
Indicates the percentage of
2,3,78 Tetrachlorodibenzo- p-dioxin
(CAS # 01746-01-6) in the reported Dioxin or
Dioxin-like compound. Values are either 0 or
a number between 0.01 and 100 (inclusive).
Source: TRI REPORTING FORM
DIOXIN DISTRIBUTION 17
Reference: Part II, Section 1.4
23
REPORTING YEAR
C
Calendar year in which the reported activities
occur.
Source: TRI REPORTING FOMR.
REPORTING YEAR
Reference: Part I, Section 1
146
-------
Num.
Field Name
Type
Description
24
TRADE SECRET
INDICATOR
C
Indicates whether the reporting facility claims
the identity of the chemical or chemical
category as a trade secret.
Yes = Checked (Trade Secret)
No = Not checked
Note: Only Sanitized Trade Secret submissions
are stored in the TRIS database.
Source: TRI REPORTING FOMR.
TRADE SECRET IND
Reference: Part I, Section 2.1
25
FACILITY NAME
C
Name of the reporting facility.
Source:
TRI FACILITY.FACILITY NAME
Reference: Part I, Section 4.1
26
FACILITY STREET
C
Street address of the reporting facility.
Source:
TRIFACILITY.STREETADDRESS
Reference: Part I, Section 4.1
27
FACILITY CITY
C
City in which the reporting facility is located.
Source: TRI FACILITY.CITY NAME
Reference: Parti, Section 4.1
28
FACILITY COUNTY
C
County in which the reporting facility is
located.
Source: TRI FACILITY.COUNTY NAME
Reference: Part I, Section 4.1
29
FACILITY STATE
C
Two-letter state code of the reporting facility.
Source: TRI FACILITY. STATE ABBR
Reference: Part I, Section 4.1
30
FACILITY ZIP CODE
C
ZIP code of the reporting facility.
Source: TRI FACILITY.ZIP CODE
Reference: Part I, Section 4.1
147
-------
Num.
Field Name
Type
Description
31
ENTIRE FACILITY IND
C
Indicates whether the information covers an
entire facility or part of a facility.
Yes = entire
No = partial
Source: TRI REPORTING FORM.
ENTIRE FAC
Reference: Part I, Section 4.2a
32
PARTIAL FACILITY IND
C
Indicates whether the information covers an
entire facility or part of a facility.
Yes = partial
No = entire
Source: TRI REPORTING FORM.
PARTIAL FAC
Reference: Part I, Section 4.2b
33
FEDERAL FACILITY IND
C
Code indicating whether a facility is Federal or
not.
Yes = Federal
No = non-Federal or GOCO
Source:
TRI REPORTING FORM.FEDERAL FA
C IND
Form R: Part I Section 4.2c
34
GOCO FACILITY IND
C
Code indicating whether a facility is GOCO
(Government-Owned, Contractor-Operated)
facility or not:
Yes = GOCO
No = non-GOCO
Source: TRI REPORTING FORM GOCO
FLAG
Reference: Form R: Part I Section 4.2d
35
PRIMARY SIC CODE
C
Primary four-digit Standard Industrial
Classification (SIC) Code.
Source:
TRISUBMISSIONSIC. SICC ODE
Reference: Part I, Section 4.5a
148
-------
Num.
Field Name
Type
Description
36
SIC CODE 2
C
Second four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5b
37
SIC CODE 3
C
Third four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5c
38
SIC CODE 4
C
Fourth four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5d
39
SIC CODE 5
C
Fifth four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5e
40
SIC CODE 6
C
Sixth four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5f
41
LATITUDE
N
Reported latitude of the reporting facility
converted into decimal degrees (Format:
signed 2 digit whole number, 6 digit decimal
positions +nn nnnnnn)
Source: TRI FACILITY.FAC LATITUDE
Reference: Part I, Section 4.6
42
LONGITUDE
N
Reported longitude of the reporting facility
converted into decimal degrees. (Format:
signed 3 digit whole number, 6 digit decimal
positions +nnn.nnnnnn).
Source:
TRI FACILITY.FAC LONGITUDE
Reference: Part I, Section 4.6
149
-------
Num.
Field Name
Type
Description
43
D&BNRA
C
Unique identification number assigned by Dun
and Bradstreet to the reporting facility.
Source: TRI FACILITY DB DB NUM
Reference: Part I, Section 4.7a
44
D&B NR B
C
Unique identification number assigned by Dun
and Bradstreet to the reporting facility.
Source: TRI FACILITY DB DB NUM
Reference: Part I, Section 4.7b
45
RCRA NR A
C
Twelve-digit alphanumeric identifier assigned
by EPA under the resource Conservation and
Recovery Act.
Source:
TRI FACILITY RCRA.RCRA NUM
Reference: Part I, Section 4.8a
46
RCRA NR B
C
Twelve-digit alphanumeric identifier assigned
by EPA under the resource Conservation and
Recovery Act.
Source:
TRI FACILITY RCRA.RCRA NUM
Reference: Part I, Section 4.8b
47
NPDES NR A
C
Nine-digit alphanumeric identifier assigned to
a facility under EPA's National Pollutant
Discharge Elimination System.
Source:
TRI FACILITY NPDES.NPDES NUM
Reference: Part I, Section 4.9a
48
NPDES NR B
C
Nine-digit alphanumeric identifier assigned to
a facility under EPA's National Pollutant
Discharge Elimination System.
Source:
TRI FACILITY NPDES.NPDES NUM
Reference: Part I, Section 4.9b
49
UIC NR A
C
Underground injection identification number,
assigned by EPA or the state, to a facility
which injects chemical waste into class 1 wells.
Source: TRI_FACILITY_UIC.UIC_NUM
Reference: Part I, Section 4.10a
150
-------
Num.
Field Name
Type
Description
50
UIC NR B
C
Underground injection identification number,
assigned by EPA or the state, to a facility
which injects chemical waste into class II to V
wells.
Source: TRI FACILITY UIC.UIC NUM
Reference: Part I, Section 4.10b
51
PARENT COMPANY
NAME
C
Name of the corporation or other business
entity that owns or controls the reporting
facility.
Source: TRI FACILITY.PARENT CO
NAME
Reference: Part I, Section 5.1
52
PARENT COMPANY D&B
NR
C
Unique identification number assigned by Dun
and Bradstreet to the parent company of the
reporting facility.
Source:
TRI FACILITY.PARENT CO DB
NUM
Reference: Part I, Section 5.2
53
TOTAL POTW
TRANSFERS
N
Amount reported in pounds of total of transfers
offsite to publicly owned treatment works.
Source:
TRI TRANSFER QTY.TRANSFER
TOTAL +
TRI TRANSFER QTY.TRANSFER
RANGE CODE
Form R: Part II, Section 6.1 .A. 1
54
BASIS OF ESTIMATE FOR
POTWS
Code indicating the principal method by which
the amount of wastewater transferred to all
POTWs estimate is calculated.
M = based on monitoring data
C = based on mass balance
calculations
E = based on published
emission factors
0 = other
Source:
TRI TRANSFER QTY.TRANSFER BASI
S_ EST CODE
Reference: Part II, Section 6.1.A.2
151
-------
Num.
Field Name
Type
Description
55
POTW A - NAME
C
Name of the publicly-owned treatment works
facility (POTW) location to which the
chemical was sent.
Source:
TRI POTW_LOCATION.POTW NAME
Reference: Part II, Section 6.1.B.1
56
POTW A - ADDRESS
C
Street address of the POTW location to which
the chemical was sent.
Source:
TRI POTW_LOCATION.POTW STREET
Reference: Part II, Section 6.1.B.1
57
POTW A - CITY
C
Name of the city in which the POTW site is
located.
Source:
TRI POTW_LOCATION.CITY NAME
Reference: Part II, Section 6.1.B.1
58
POTW A - STATE
C
The two-letter state abbreviation of the POTW
site.
Source: TRI POTW LOCATION.STATE
ABBR
Reference: Part II, Section 6.1.B.1
59
POTW A - COUNTY
C
Name of the county in which the POTW site is
located.
Source:
TRI POTW LOCATION.COUNTY NAM
E
Reference: Part II, Section 6.1.B.1
60
POTW A - ZIP
C
ZIP code used in the address of a POTW site.
Source:
TRI POTW_LOCATION.ZIP CODE
Reference: Part II, Section 6.1.B.1
61
POTW B - NAME
C
Name of the publicly-owned treatment works
facility (POTW) location to which the
chemical was sent.
Source:
TRIPOTWLOCATION.POTWNAME
Reference: Part II, Section 6.1.B.2
152
-------
Num.
Field Name
Type
Description
62
POTW B - ADDRESS
C
Street address of the POTW location to which
the chemical was sent.
Source:
TRI POTW_LOCATION.POTWSTREET
Reference: Part II, Section 6.1.B.2
63
POTW B - CITY
C
Name of the city in which the POTW site is
located.
Source:
TRI_POTW_LOCATION.CITY NAME
Reference: Part II, Section 6.1.B.2
64
POTW B - STATE
C
The two-letter state abbreviation of the POTW
site.
Source:
TRIPOTWLOCATION.STATEABBR
Reference: Part II, Section 6.1.B.2
65
POTW B - COUNTY
C
Name of the county in which the POTW site is
located.
Source:
TRI POTW LOCATION.COUNTY NAM
E
Reference: Part II, Section 6.1.B.2
66
POTW B - ZIP
C
ZIP code used in the address of a POTW site.
Source:
TRI POTW_LOCATION.ZIP CODE
Reference: Part II, Section 6.1.B.1
153
-------
3.6 Facility Information Directory (Type 4)
Num.
Field Name
Type
Description
1
REPORTING YEAR
C
Calendar year in which the reported activities
occur.
Source: TRI REPORTING FOMR.
REPORTING YEAR
Reference: Part I, Section 1
2
TITLE OF CERTIFYING
OFFICIAL
C
Corporate title of the senior official certifying
the accuracy and completeness of information
on the submission.
Source: TRI REPORTING FOMR.CERT
OFFICIAL TITLE
Reference: Part I, Section 3
3
NAME OF CERTIFYING
OFFICIAL
C
Name of the senior official certifying the
accuracy and complete- ness of the information
on the submission.
Source:
TRI REPORTING_FOMR.CERT NAME
Reference: Part I, Section 3
4
TRIFID
C
Facility identification in the format zzzzz-
nnnnn-sssss where usually zzzzz = facility zip
code, nnnnn = first five consonants of the
name, and sssss = first five non-special
characters in the street address.
NOTE: The contents of this field is not
changed to match facility ownership, or zip
code changes. Rather, the TRI Facility ID
identifies a specific geographical location
which is also identified by the latitude and
longitude of that location.
Source:
TRI FACILITY.TRI FACILITY ID
Reference: Part I, Section 4.1
5
FACILITY NAME
C
Name of the reporting facility.
Source: TRI FACILITY.FACILITY NAME
Reference: Part I, Section 4.1
154
-------
Num.
Field Name
Type
Description
6
FACILITY STREET
C
Street address of the reporting facility.
Source:
TRIFACILITY.STREETADDRESS
Reference: Part I, Section 4.1
7
FACILITY CITY
C
City in which the reporting facility is located.
Source: TRI FACILITY.CITY NAME
Reference: Parti, Section 4.1
8
FACILITY COUNTY
C
County in which the reporting facility is
located.
Source: TRI FACILITY.COUNTY NAME
Reference: Part I, Section 4.1
9
FACILITY STATE
C
Two-letter state code of the reporting facility.
Source: TRIFACILITY.STATEABBR
Reference: Part I, Section 4.1
10
FACILITY ZIP CODE
C
ZIP code of the reporting facility.
Source: TRI FACILITY. ZIP CODE
Reference: Part I, Section 4.1
11
MAILING NAME
C
The first and second lines of the mailing name
for the facility.
Source: TRIFACILITY.MAILNAME
12
MAILING STREET
C
Street address of the reporting facility s
mailing address.
Source: TRI FACILITY.
MAIL STREET ADDRES S
Reference: Part I, Section 4.1
13
MAILING CITY
C
City name provided by the reporting facility to
which mail is to be sent
Source: TRI FACILITY.MAIL CITY
Reference: Part I, Section 4.1
14
MAILING STATE
C
State of the reporting facility s mailing
address.
Source:
TRI_FACILITY.MAIL STATE ABBR
Reference: Part I, Section 4.1
155
-------
Num.
Field Name
Type
Description
15
MAILING PROVINCE
C
Province of the reporting facility's mailing
address.
Source: TRI FACILITY.MAIL PROVINCE
Reference: Part I, Section 4.1
16
MAILING ZIP CODE
C
ZIP code of the mailing address provided by
the reporting facility.
Source: TRI FACILITY.MAIL ZIP CODE
Reference: Part I, Section 4.1
17
ENTIRE FACILITY IND
C
Indicates whether the information covers an
entire facility or part of a facility.
Yes = entire
No = partial
Source:
TRIREPORTINGFORM.ENTIREFAC
Reference: Part I, Section 4.2a
18
PARTIAL FACILITY IND
C
Indicates whether the information covers an
entire facility or part of a facility:
Yes = partial
No = entire
Source:
TRIREPORTINGFORM.PARTIALFAC
Reference: Part I, Section 4.2b
19
FEDERAL FACILITY IND
C
Code indicating whether a facility is Federal or
not:
Yes = Federal
No = non-Federal
Source:
TRI REPORTING FORM.FEDERAL
FAC IND
Form R: Part I Section 4.2c
20
GOCO FACILITY IND
C
Code indicating whether a facility is GOCO
(Government-Owned, Contractor-Operated)
facility or not:
Yes = GOCO
No = non-GOCO
Source: TRI REPORTING FORM.GOCO
FLAG
Form R: Part I Section 4.2d
156
-------
Num.
Field Name
Type
Description
21
PUBLIC CONTACT NAME
C
Name of the person whom the public may
contact if clarification of the information on
the reporting form is required.
Source: TRI FACILITY.
ASGNPUBLICCONTACT
Reference: Part I, Section 4.4
22
PUBLIC CONTACT
PHONE
C
Telephone number, including area code, of the
public contact.
Source: TRI FACILITY.
ASGN PUBLIC PHONE
Reference: Part I, Section 4.4
23
PRIMARY SIC CODE
C
First four-digit Standard Industrial
Classification (SIC) Code entered by facility
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5a
24
SIC CODE 2
C
Second four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5b
25
SIC CODE 3
C
Third four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5c
26
SIC CODE 4
C
Fourth four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5d
27
SIC CODE 5
C
Fifth four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5e
157
-------
Num.
Field Name
Type
Description
28
SIC CODE 6
C
Sixth four-digit Standard Industrial
Classification (SIC) Code entered by facility.
Source:
TRISUBMISSIONSIC.SICCODE
Reference: Part I, Section 4.5f
29
LATITUDE
N
Reported latitude of the reporting facility
converted into decimal degrees (Format:
signed 2 digit whole number, 6 digit decimal
positions +nn nnnnnn)
Source: TRI FACILITY.
FAC LATITUDE
Reference: Part I, Section 4.6
30
LONGITUDE
N
Reported longitude of the reporting facility
converted into decimal degrees. (Format:
signed 3 digit whole number, 6 digit decimal
positions +nnn.nnnnnn).
Source: TRI FACILITY.
FAC LONGITUDE
Reference: Part I, Section 4.6
31
D&BNRA
C
Unique identification number assigned by Dun
and Bradstreet to the reporting facility.
Source: TRI FACILITY DB.DB NUM
Reference: Part I, Section 4.7a
32
D&B NR B
C
Unique identification number assigned by Dun
and Bradstreet to the reporting facility.
Source: TRI FACILITY DB DB NUM
Reference: Part I, Section 4.7b
33
RCRA NR A
c
Twelve-digit alphanumeric identifier assigned
by EPA under the resource Conservation and
Recovery Act.
Source:
TRI FACILITY RCRA RCRA NUM
Reference: Part I, Section 4.8a
34
RCRA NR B
c
Twelve-digit alphanumeric identifier assigned
by EPA under the resource Conservation and
Recovery Act.
Source:
TRI FACILITY RCRA RCRA NUM
Reference: Part I, Section 4.8b
158
-------
Num.
Field Name
Type
Description
35
NPDES NR A
C
Nine-digit alphanumeric identifier assigned to
a facility under EPA's National Pollutant
Discharge Elimination System.
Source:
TRI FACILITY NPDES.NPDES NUM
Reference: Part I, Section 4.9a
36
NPDES NR B
C
Nine-digit alphanumeric identifier assigned to
a facility under EPA's National Pollutant
Discharge Elimination System.
Source:
TRI FACILITY NPDES.NPDES NUM
Reference: Part I, Section 4.9b
37
UIC NR A
C
Underground injection identification number,
assigned by EPA or the state, to a facility
which injects chemical waste into class I wells.
Source: TRI FACILITY UIC.UIC NUM
Reference: Part I, Section 4.10a
38
UIC NR B
C
Underground injection identification number,
assigned by EPA or the state, to a facility
which injects chemical waste into class II to V
wells.
Source: TRI_FACILITY_UIC.UIC_NUM
Reference: Part I, Section 4.10b
39
PARENT COMPANY
NAME
C
Name of the corporation or other business
entity that owns or controls the reporting
facility.
Source: TRI FACILITY.PARENT CO
NAME
Reference: Part I, Section 5.1
40
PARENT COMPANY D&B
NR
C
Unique identification number assigned by Dun
and Bradstreet to the parent company of the
reporting facility.
Source: TRI FACILITY.PARENT CO
DB NUM
Reference: Part I, Section 5.2
159
-------
Num.
Field Name
Type
Description
41
TECHNICAL CONTACT
NAME
C
This field provides the name of the person to
be contacted by EPA or state officials if
clarification of the information reported on the
form is required.
Source: TRI FACILITY.
ASGN_TECHNICAL CONTACT
Reference: Part I, Section 4.3
42
TECHNICAL CONTACT
PHONE
C
This field provides the telephone number,
including area code, of the technical contact.
Source: TRI FACILITY.
ASGN TECHNICAL PHONE
Reference: Part I, Section 4.3
160
------- |