Green Chemistry Challenge Awards Program: Nomination Package for 2024 Awards


&EPA

United States
Environmental
Protection
Agency

Green Chemistry
Challenge Awards
Program:

Nomination
Package for
2024 Awards



Closing Date: December 8, 2023

An electronic version of this document is available on the EPA website.

Register for a free informational webinar on September 20, 2023, 2-3 p.m. Eastern Time

-------

-------
Green Chemistry Challenge
Awards Program:

Nomination Package for 2024 Awards

Introduction	2

Award Categories	3

Scope of the Program	3

A.	Green Chemistry Technologies	3

B.	S ource Reducti on	4

C.	Eligible Individuals or Organizations	4

D.	Significant Milestone	4

E.	Significant U.S. Component	5

F.	Focus Areas of the Green Chemistry Challenge	5

Selection Criteria	6

A.	Science and Innovation	6

B.	Human Health and Environmental Benefits	6

C.	Applicability and Impact	7

AwardsProcess	7

A.	Basic Information	7

B.	Overall Format	8

C.	Structure of Nominations	8

D.	Submitting Your Nomination to EPA	10

1.	Receipt of Nominations	10

2.	Judging Entries	10

3.	Notification of Winners	11

Contact Us	11

Sample Cover Page	12

Award Nomination Checklist	13

1

-------
Introduction

Green Chemistry Challenge
Awards Program:

Nomination Package for 2024 Awards

THE GREEN CHEMISTRY CHALLENGE AWARDS promote the environmental
and economic benefits of developing and using novel green chemistry. These
prestigious annual awards recognize chemical technologies that incorporate green
chemistry into chemical design, manufacture, and use. The 2024 Awards will also
recognize green chemical technologies that address chemical and process design for
circularity and climate change.

EPA's Office of Chemical Safety and Pollution Prevention sponsors the Green Chemistry
Challenge Awards in partnership with the American Chemical Society Green Chemistry
Institute® and other members of the chemical community.

This nomination package contains instructions on how to enter the 2024 competition.

Entries are due no later than December 8, 2023. EPA will present the awards at a
ceremony in fall 2024. Register for a free informational webinar on September 20,
2023, from 2-3 p.m. Eastern Time.

Green Chemistry

Green chemistry is the design of chemical products and processes that reduce or
eliminate the use or generation of hazardous substances. Green chemistry applies across
the lifecycle of a chemical product, including its design, manufacture, use, and ultimate
disposal.

Green chemistry reduces pollution at its source by minimizing or eliminating the
environmental impacts of chemical processes as well as the hazards of chemical
feedstocks, reagents, solvents, and products. This is unlike treating pollution after it is
formed (also called remediation), which involves end-of-the-pipe treatment or cleaning
up of environmental spills and other releases.

Remediation may include separating hazardous chemicals from other materials, then
treating them so they are no longer hazardous or concentrating them for safe disposal.
Most remediation activities do not involve green chemistry. Remediation removes
hazardous materials from the environment. On the other hand, green chemistry keeps the
hazardous materials from being created in the first place.

However, if a technology reduces or eliminates the hazardous chemicals used to clean up
environmental contaminants or promotes circularity in products, it will qualify as a green
chemistry technology. One example is replacing a hazardous sorbent chemical used to
capture mercury from the air for safe disposal with an effective, yet nonhazardous
sorbent. Using the nonhazardous sorbent means that the hazardous sorbent will not be
manufactured so the remediation technology meets the definition of green chemistry.

-------
EPA usually presents one Green Chemistry Challenge Award in each award category.
For the 2024 competition, there are six award categories, with a specific
environmental benefit category to recognize a green chemistry technology that can
prevent or reduce greenhouse gas emissions:

¦ Focus Area 1: Greener Synthetic Pathways.

¦ Focus Area 2: Chemical and Process Design for Circularity.

¦ Focus Area 3: Design of Safer and Degradable Chemicals.

¦ Specific Environmental Benefit: Climate Change (for a technology in any of the
three focus areas that can prevent or reduce greenhouse gas emissions).

¦ Small Business* (for a technology in any of the three focus areas developed by a
small business).

¦ Academic (for a technology in any of the three focus areas developed by an
academic researcher).

*A small business for purposes of this award must have annual sales of less than $40
million, including all domestic and foreign sales by the company, its subsidiaries, and its
parent company.

More detail about the three Focus Areas is included below.

o be eligible for an award, a nominated technology must meet the scope of the Green
Chemistry Challenge Awards program by meeting each of these six criteria:

1. It must be a green chemistry technology with a significant chemistry component.

2. It must include source reduction.

3. Its sponsor must be an eligible entity.

4. It must have a significant milestone in its development within the past five years.

5. It must have a significant U.S. component.

6. It must fit within at least one of the three focus areas of the program.

A. Green Chemistry Technologies

Green chemistry technologies are extremely diverse. As a group, they:

1. Improve upon any chemical product or process by reducing negative impacts on
human health and the environment relative to competing technologies.

2. Consider all aspects of chemical design and chemical processes, e.g., design of
chemicals for function and safety, catalysts, solvents, reaction conditions,
separations, analysis, and monitoring.

3. Make improvements to stage(s) of a chemical's lifecycle, for example,
substituting a greener feedstock, reagent, catalyst, or solvent into an existing
synthetic pathway without significant trade-offs in other environmental impacts.

4. May substitute a single improved product or an entire synthetic pathway.

Award
Categories

Scope of the
Program

-------
5. Benefit human health and the environment at any point of the technology's
lifecycle: extraction, synthesis, use, and ultimate fate and considers potential
trade-offs in other point of lifecycle.

6. Incorporate green chemistry at the earliest design stages of a new product or
process.

7. Employ a significant change in chemistry and chemical engineering.

For a list of prior Green Chemistry Award winners, please visit https://www.epa.gov/
greenchemistry/green-chemistry-challenge-winners.

B. Source Reduction

For this program, EPA defines green chemistry as the use of chemistry for source
reduction.

According to the Pollution Prevention Act of 1990 (PPA), the term "source reduction,"
also known as Pollution Prevention or P2, means any practice which:

¦ Reduces the amount of any hazardous substance, pollutant, or contaminant
entering any waste stream or otherwise released into the environment (including
fugitive emissions) prior to recycling, treatment, or disposal; and

¦ Reduces the hazards to public health and the environment associated with the
release of such substances, pollutants, or contaminants. The term includes
equipment or technology modifications, process or procedure modifications,
reformulation or redesign of products, substitution of raw materials, and
improvements in housekeeping, maintenance, training, or inventory control.

The term does not include any practice which alters the physical, chemical, or biological
characteristics or the volume of a hazardous substance, pollutant, or contaminant through
a process or activity which itself is not integral to and necessary for the production of a
product or the providing of a service.

Additionally, EPA interprets P2 as including practices that reduce or eliminate the
creation of pollutants through increased efficiency in the use of water, energy, raw
materials, or other resources, or that may protect natural resources through conservation.

C. Eligible Individuals or Organizations

Companies, individuals, academic institutions (including state and tribal universities),
non-profit and not-for profit organizations and their representatives are eligible for Green
Chemistry Challenge Awards for outstanding or innovative source reduction
technologies. Members of the federal government, including U.S. departments, agencies,
and laboratories are NOT eligible to receive this award. However, they can be a partner
in the research as long as they are not the nominee.

D. Significant Milestone

A green chemistry technology must have reached a significant milestone within the past
five years.

-------
Some examples are:

¦ Critical discovery made.

¦ Results published.

¦ Patent application submitted or approved.

¦ Pilot plant constructed.

¦ Relevant regulatory review (e.g., by EPA under TSCA,1 FIFRA,2 or CAA,3 by the
U.S. Food and Drug Administration under FFDCA)4 initiated or completed.

¦ Technology commercially implemented or launched.

E. Significant U.S. Component

A significant amount of the research, development, or other aspects of the technology
must have occurred within the United States. If the only aspect of the technology within
the Unites States is product sales, the technology may not meet the scope of the program.

F. Focus Areas of the Green Chemistry Challenge

Green chemistry technologies fit into at least one of the three focus areas below.
Technologies that do not fit within at least one focus area may not fall within the scope of
the program.

Focus Area 1: Greener Synthetic Pathways

This focus area involves designing and implementing synthetic pathways or processes
that minimize environmental impact from a lifecycle perspective. The use of green
chemistry and/or lifecycle metrics are expected.

Examples include:

¦ The use of feedstocks that have low hazard and are renewable (e.g., biomass,
triglycerides).

¦ The use of novel greener reagents or catalysts (such as biocatalysis and combining
multiple modes of catalysis).

¦ Reducing the impact of solvent use on human health and the environment - either
by solvent replacement, reduction, or complete elimination.

Focus Area 2: Chemical and Process Design for Circularity

This focus area involves designing greener chemicals and materials that have both
function and a viable path for reclamation and reuse after the product has reached
end-of-life of primary use. The latter would theoretically possess physiochemical
characteristics that keeps substances out of landfills. The products should be made
and managed in a manner consistent with the principles of green chemistry and
engineering, and the energy, materials and reagents used to recirculate should be
quantitated.

-------
Examples include:

¦	Design and selection of functional materials that are durable, have reduced
environmental impact, improved ability to be recycled or upcycled, and are
compatible with circular processes.

¦	Design processes for recycling or upcycling materials to keep chemical
components active in the economy for as long as possible. Development of
methods to promote efficient recycling of polymeric materials are also in scope.

¦	Create closed-loop system where chemicals and materials are continuously
reused, remanufactured, and recycled.

Focus Area 3: Design of Safer and Degradable Chemicals

This focus area involves designing and implementing functional chemicals and

materials that minimize or eliminate hazardous substances or provide avenues for

improved degradation into non-toxic degradants. The evaluation of different types of

hazards to humans, and the environment or the rates of biodegradation are expected.

Examples include chemicals and materials that:

¦	Minimize toxicity for one or more toxicity types (endpoints) without trade-offs in
other end points (e.g., reduce carcinogenicity but increase hormone disruption).

¦	Are inherently safer because they reduce the likelihood or severity of adverse
effects when unintended exposures occur (e.g., accidental spills or releases).

¦	Minimize environmental persistence by increasing degradability under different
conditions (e.g., eliminate the use of polyfluorinated compounds, which have high
persistence and toxicity).

¦	Are safer for the atmosphere (e.g., do not deplete ozone, form smog, etc.).

Nominated chemistry technologies that meet the scope of the program will be judged
on how well they meet the following three selection criteria:

A.	Science and Innovation

The nominated chemistry technology should be innovative and of scientific merit. The
technology should be, for example:

¦	Original (i.e., never employed before); and

¦	Scientifically valid, that is, can the nominated technology or strategy stand up to
scientific scrutiny through peer review? Does the nomination contain enough
chemical detail to reinforce or prove its scientific validity? Has the mechanism of
action been clarified via scientific research?

B.	Human Health and Environmental Benefits

The nominated chemistry technology should offer human health and environmental
benefits at some point in its lifecycle from resource extraction to ultimate disposal.

-------
Please provide quantitative evidence for:

1.	Impact of your nominated technology, such as mass of hazardous chemicals
eliminated, or gallons of water reduced.

2.	Evaluation of different hazard types to humans and the environment.

3.	If relevant, the rates of biodegradation are expected.

The technology might, for example:

¦	Reduce a toxicity based on specific endpoints to humans, animals, or plants.

¦	Reduce flammability or explosion potential.

¦	Reduce the use or generation of hazardous substances, the transport of hazardous
substances, or their releases to air, water, or land.

¦	Reduce the generation of all types of waste, even if the waste is not hazardous.

¦	Minimize end-of-life solid waste generation by developing routes to chemical
circularity.

¦	Reduce energy use and generation of CO2 and other greenhouse gases.
C. Applicability and Impact

The nominated chemistry technology should have proven ability to minimize
environmental impact. The technology may be broadly applicable to many chemical
processes or industries; alternatively, it may have a large impact on a narrow area of
chemistry. Commercial implementation can help demonstrate the applicability and
impact of a technology. Nominations for pre-commercial technologies should discuss the
economic feasibility of the technology.

The nominated technology should offer three advantages:

¦	A practical, cost-effective approach to green chemistry.

¦	A remedy to a real environmental or human health problem.

¦	One or more technical innovations that are readily transferrable to other
processes, facilities, or industry sectors.

T

he following section details the format, submission, and evaluation of award
nominations. Please consider the following information carefully.

A. Basic Information

¦	Award nominations are due to EPA by December 8, 2023. Awards will be
presented in fall 2024.

¦	Self-nominations are the most common; nominations of others are also welcomed.

¦	There is no entry fee.

¦	There is no standard entry form, but nominations must meet certain requirements
or EPA may reject them.

¦	You may nominate more than one technology, but you must submit a separate,
stand-alone nomination for each one. If your technology has multiple

7

-------
applications, you are more likely to win an award by showcasing those uses in
one nomination.

B.	Overall Format

Nominations must have:

¦	No more than eight pages, including the cover page.

¦	Single-spaced, 12-point type, but references, captions, and footnotes may be as
small as 10-pointtype.

¦	Margins of at least 1 inch when printed on 8V2-by-l 1-inch paper.

Nominations may include:

¦	Chemical reactions, tables, graphs, charts, photographs, diagrams, and other
illustrations within their eight pages.

¦	Text or illustrations in color, but the judges may read the nominations printed in
black and white; therefore, nominations should not require color for
interpretation.

¦	Links to published articles, patents, etc. Nominations should not rely on
information in links to present their technology because judges may not follow
any links.

C.	Structure of Nominations

The first page must be a cover page with the:

¦	Technology title and date of the nomination.

¦	Primary sponsor(s): the individual or organizational owner(s) of the technology.
For academic nominations, the primary sponsor is usually the principal
investigator. For nominations with more than one sponsor, each co-sponsor
should have had a significant role in the research, development, or
implementation of the technology.

¦	Contact person with full mailing address, email address, and telephone number:
the one individual with whom EPA will communicate regarding the nomination.
For academic nominations, the contact person is usually the principal investigator.
For other nominations, the contact should be a project manager or other technical
representative. We add the person listed as the contact to the list of subscribers for
our electronic newsletter. Periodically, we email reminders and updates about the
program to those on our list. You may opt out at any time.

¦	Contributors (optional): those individuals or organizations that provided
financial or technical support to develop or implement the technology.

The second page should contain the following information:

¦	Technology title

¦	A sentence indicating whether the nominated technology is eligible for the
Specific Environmental Benefit, Climate Change award.

-------
¦	A sentence indicating whether the nominated technology is eligible for the small
business award, the academic award, both, or neither.

¦	The name (or number) of the EPA award focus area (or areas) that fits your
technology. The focus areas are (1) greener synthetic pathways; (2) chemical and
process design for circularity; and (3) the design of safer and degradable
chemicals. No explanation is needed.

¦	One- or two-line description of the most recent milestone for the nominated
technology and the year it occurred. Only one milestone and year are required;
the milestone must be within the last five years.

¦	One or two sentences describing the U.S. component of the technology: the
research, development, implementation, or other activities of the technology that
occurred within the United States.

¦	An abstract (not to exceed 500 words) that describes the nominated technology,
the problem it addresses, and its benefits. Include the degree of implementation
(or commercialization) of the technology and any quantitative benefits of
adopting the technology, including the amount of hazardous substances
eliminated, energy saved, carbon dioxide emissions eliminated, water saved, as
appropriate. You must indicate if the quantitative benefits described are
actual or potential results. EPA plans to publish these abstracts in its annual
Summary of Award Entries and Recipients. If you are nominating a technology
submitted in a previous year, you may use the abstract previously published by
EPA in whole or in part. Links to previous annual summaries of award entries and
recipients are available on the award winner page of our website:
https://www.epa.gov/greenchemistry/.

The information in this section should fit on page 2, but you may continue on page 3 if

necessary.

The remaining pages should show how your technology meets both the:

¦	Scope of the program; and

¦	Three selection criteria.

The judges will look for detailed explanations of:

¦	The problem (environmental or human health risk) that your technology
addresses, its importance, and how your technology solves it.

¦	The chemistry of your new technology, emphasizing its novelty, scientific merit,
and conformity to the scope of this award. To be eligible for an award, your
technology must include a significant chemistry component. Include as much
nonproprietary detail as possible, such as the specifics of your chemistry and
detailed reaction pathways. Consider using chemical structure diagrams to
describe your chemistry. You may include patent numbers or references to peer-
reviewed publications, but add only the most important, recent ones because
references take space away from other details of your technology.

9

-------
¦ Realized or potential benefits and drawbacks. These may occur across all
stages of your technology's lifecycle: from feedstocks to manufacture, use, and
the ultimate disposal of the product. Include the human health, environmental, and
economic benefits of your technology such as toxicity data and quantities of
hazardous substances reduced or eliminated. If you have not done a full lifecycle
analysis, discuss the impacts of your technology across the lifecycle to the extent
you know them.

¦ How your technology compares with any other technologies that address the
same problem. Comparing the cost, performance, and environmental profile of
your technology with any competing technologies may demonstrate the broad
applicability of your technology.

¦ Current and planned commercialization. For example, is your technology
currently on the market? Are you building a pilot or manufacturing plant?

If your technology is or is about to be commercially available, also discuss the regulatory
status of any novel chemical substance or organism under any applicable laws such as
TSCA1, FIFRA2, CAA3, or FFDCA4. EPA must assure that winning technologies comply
with these laws.

D. Submitting Your Nomination to EPA

Submit an electronic copy of your nomination in a format so that EPA can select and
copy text. Include the primary sponsor's name in the file name. You may want to submit
your nomination as a .PDF file to minimize possible reading errors, but EPA accepts and
can read all common file types. Send the electronic copy by email to
greenchemistry@epa.gov. If you encounter problems submitting your nomination
electronically, please contact us at greenchemistry@epa.gov or (202) 564-8849.

1. Receipt of Nominations

¦ EPA will consider all entries as public information.

¦ EPA will not return any material.

¦ EPA is not responsible for lost or damaged entries.

¦ EPA acknowledges receipt of nominations by email to the contact person
identified in the nomination. If EPA does not acknowledge your nomination
within one week after the submission deadline, please contact us at
greenchemistry@epa.gov or (202) 564-8849.

2. Judging Entries

A panel of technical experts convened by the American Chemical Society Green
Chemistry Institute will judge nominations. These anonymous experts might include
members of the scientific, industrial, governmental, educational, and environmental
communities. EPA may ask the designated contact person to verify any chemistry
described or claims made in nominations on behalf of the judges. The judges will select
as award recipients those green chemistry technologies that best meet the selection
criteria. The judges may use their discretion, however, to make more than one award (or
no award) in any one category. Each applicant will be screened for any civil and criminal
environmental actions. EPA will screen your organization and any related subsidiaries for

-------
compliance with environmental regulations. Nominees can check their compliance record
by accessing EPA's Corporate Compliance Screener.

3. Notification of Winners

EPA will notify winners prior to the official public announcement, which will be made in
fall 2024. EPA will present a commemorative award to the primary sponsor(s) of the
winning green chemistry technology in each of the six award categories and certificates
to individuals identified by the primary sponsor(s) who contributed to the research,
development, or implementation of the technology.

Contact Us

If you have questions about the scope of the program, nomination procedures, or the
Green Chemistry Challenge Program, please email EPA's Sustainability and Pollution
Prevention Branch at greenchemistry@epa.gov or call (202) 564-8849.

11

-------
J)lease use the format below for the cover page of your nomination.5

Nominations with an Academic Sponsor

Title of Nomination
Date of Nomination

Primary Sponsor(s):

Full Name (Primary Investigator)

Name of Institution

Contact Person:

Full name
Title

Address Phone
Email

Contributor(s): (optional) Individuals and/or organizations

Nominations with an Business Sponsor

Title of Nomination
Date of Nomination

Primary Sponsor(s):

Company Name

Contact Person:

Full name

Title

Address

Phone

Email

Contributor(s): (optional) Individuals and/or organizations

-------
Include (V) the following components (see "How to Enter," page 5, for details):

~

~

~
~
~
~
~
~

Cover page.

One sentence indicating whether the nomination is eligible for the Climate
Change category.

One sentence indicating whether the nomination is eligible for the
academic category, the small business category, both, or neither.

Name or number of the EPA award focus area(s) for the nominated
technology.

One- or two-line description of the most recent milestone and the year it
occurred.

One or two sentences describing the activities that took place within the
United States.

Abstract, including quantitative description of environmental benefits of
the nominated technology (500 words or fewer).

Detailed description of how the nominated technology meets the scope of
the program and the selection criteria.

Award

Nomination

Checklist

'TSCA is the Toxic Substances Control Act.

2FIFRA is the Federal Insecticide, Fungicide, and Rodenticide Act.

3CAA is the Clean Air Act.

4FFDCA is the Federal Food, Drug, and Cosmetic Act.

'Individual nominations without an academic or business sponsor should use the Business
Sponsor format above but enter their own name in place of the Company Name.

13

-------
Office of Pollution	744K23001

Prevention and	August 2023

Toxics (7406M)	www.epa.gov

-------