Toxics Release Inventory
File Type 3A
(Details of Transfers Off-site)
Basic Plus Data File Format
Documentation v14
PiaS^I by: The Environmental Protection Agency
Office of Environmental Information
Office of Information Analysis and Access
Toxics Release Inventory Program Division
Information and Outreach Branch
Date: September 23, 2015
1
-------
Table of Contents
1.0 Overview 3
1.1 Detailed Description: File Type 3A 4
2.0 Noted Changes to this Year's Basic Plus Data Files 10
3.0 Mapping the Form R/A Sections to each File 8
4.0 Field Descriptions 9
4.1 Type 3A: Detailed Transfers Off-Site Data (non-POTW) 9
Appendix A: List of Values 220
Appendix B: Chemical Classifications 223
-------
1.0 Overview
The Toxics Release Inventory (TRI) Basic Plus Data Files are a set of seven files that
collectively contain all the data that were submitted on the TRI Reporting Form R or
Certification Statement (Form A) by facilities in a selected state. The data in these files have
been extracted from the Envirofacts database system. The seven files and their contents are as
follows:
File
Example
Description of Contents
Form R or A Referent
Type 3 A
CA_3A_2013_vl3.txt
Details of Transfers Off-Site
Part I (sections, 1,4,5)
Part II (section 6.2)
The Basic Plus Data Files are identified (named) by state, file_type, reporting year and version
number.
File Name = State + File_Type + Reporting Year + Version number
For example, the file "CA_l_2013_vl3.txt" contains the Facility, Chemical identification,
Chemical uses, On-site Releases and Management, Off-site Transfers and Summary Information
(File Type 1) for all facilities located in California (CA) for reporting year 2013. The version
number is "vl3". The "vl3" signifies that the file was created with Reporting Year 2013 data.
3
File Type 6
-------
Similarly, the file "CA_2a_2013_vl3.txt" contains Reporting Year 2013 Detailed Source
Reduction Activities and Methods data for the state of California. It was created with Reporting
Year 2013 data.
In addition to the set of files for each state, there are also 2 more file sets. There is a Federal file
set (FED_l_2013_vl3.txt, FED_2A_2013_vl3.txt, etc.) which contains data for all government
owned and operated federal sites. A third set of files, known as the National Data File set,
contains all the TRI data (for all States and US Territories) for a specific year. The national data
files are named US_l_2013_vl3.txt, US_2A_2013_vl3.txt, etc.
Many of the data elements described in the Basic Plus Data Files documentation refer to the TRI
Form R and Form A Certification Statement. These are the forms that facilities use to submit
data to the TRI Program. The TRI Reporting Forms and Instructions document contains the
actual forms and the complete instructions for filling them out. The Reporting Forms and
Instructions is available at http://www2.epa.gov/toxics-release-inventory-tri-program/tri-
reporting-forms-and-instructions. Complete lists of values for many of the data fields in the
Basic Plus Data Files can be found in this document.
4
File Type 6
-------
1.1 Detailed Description: File Type 3A
File Type 3A focuses on off-site transfers. Like the other Basic Plus Data Files, it lists the basic
Facility and Chemical identification information from Part I and Part II of the Form R and A. It
also lists the off-site location that a chemical has been transferred to and the methods and
quantities of treatment or disposal.
Part
Section
Description
I
1
Reporting Year
I
1
Revision Codes
I
4
Facility Identification Information
I
5
Parent Company Information
I
1
Chemical Identification Data
II
6.2
Off-site Location Name, Address and RCRA number
II
6.2.A
Transfer Totals
II
6.2.B
Basis of Estimate
II
6.2.C
Type of Waste Treatment/Disposal/Recycling/Energy Recovery
5
File Type 6
-------
2.0 Noted Changes to this Year's TRI Basic Plus Data File
2.1 Part II, Section 8.11
6
File Type 6
-------
This page left blank
File Type 6
-------
3.0 Mapping the Form R/A Sections to each File
Part 1
Part II
1
2
3
4
5
1
2
3
4
5
6.1 .A
6.1 .B
6.2
6.2ab
c
7A
7B
7C
8
Total
Fields
File 3A
*
*
*
*
*
*
203
Notes:
PI- Section 8, data elements (8.2.B, 8.4.B, 8.6.B).
These data elements are Current Year Energy Recover, Recycled and
Treated on-site quantities.
P2 - Only 2.1 Trade Secret Indicator
P3 - Only Additional Information (Section 8.11) that was submitted via electronic reporting
(TRI-ME web, CDX or Diskette submissions)
Part & Section Definitions
Part Section Definition
1 Reporting Year
Revision Codes
2 Trade Secret
3 Certification
4 Facility Identification
5 Parent Company Info
1 Toxic Chemical Identity
2 Mixture Component Identity
3 Activities and Uses of the Toxic Chemical at the Facility
4 Maximum Amount of Chemical On-site at any time during the Calendar Year
5 Quantity of the Toxic Chemical Entering each Environmental Medium Onsite
6.1. A Discharges to Publicly Owned Treatment Works (POTWs) - Total Transfer Quantity
6.1.B Discharges to Publicly Owned Treatment Works (POTWs) - POTW name and location
6.2 Transfers to other Off-Site Locations - Name an location of Transfer site
6.2abc Transfers to other Off-Site Locations - Total Transfer Quantities, Est.Basis, Type of
Treatment/Disposal
7A On-Site Waste Treatment Methods and Efficiency
7B On-Site Energy Recovery Processes
7C On-Site Recycling Processes
8 Source Reduction and Recycling Activities
8 File Type 6
-------
4.0 Field Descriptions
The following sections contain the record structure for each of the Toxics Release Inventory
(TRI) Basic Plus Data Files. The codes and definitions used in the following record
descriptions are listed in the Toxic Chemical Release Inventory Reporting Forms and
Instructions document.
The record descriptions in each of the following sections contain the following columns and
information:
Column
Description
Number
The sequential number of the data element in the record
Field Name
The TRI System field name of the data element
Data Type
'C' for character data (alphanumeric)
'N' for numeric data
'D' for date
Description
A brief statement of what the data element represents along with its TRI System
Source (in Table Name. Field Name format) and the Form R reference
The data fields in each of the seven files are delimited by Tab (a tab is placed between each data
element).
The first record (row) of each file contains column headers or field names.
4.1 Type 3A: Detailed Transfers Off-Site Data (non-POTW)
Mum.
Field Name
Type
Description
1
TRIFID
C
Facility identification in the format zzzzznnnnnsssss
where usually zzzzz = facility zip code, nnnnn = first
five consonants of the name, and sssss = first five non-
special characters in the street address. The three
sections of the format were separated by hypens prior to
RY 2006. NOTE: The contents of this field is not
changed to match facility ownership, or zip code
changes. Rather, the TRI Facility ID identifies a specific
geographical location which is also identified by the
latitude and longitude of that location.
Source: TRUI_FACILITY.FACILITY_ID
Reference: Part I, Section 4.1
9
File Type 6
-------
Mum.
Field Name
Type
Description
2
DOCUMENT CONTROT
NUMBER
C
Unique identification number assigned to each
submission by EPA. Format: TTYYMMMNNNNNC,
where
TT = document type
YY = reporting year
MMM = document type
NNNNN= sequential number
C = check digit
Source: TRI_REPORTING_FORM.DOC_CTRL_
NUM
Format: (13 + RY + DOC_TYPE + SEQ_NUM +
Check digit)
Reference: NA (System generated)
3
CAS NUMBER
C
Chemical Abstracts Service (CAS) Registry Number for
that unique chemical, or category code (for compounds).
NOTE: CAS number 999999999 is for sanitized trade
secret submissions; CHEM_NAME displays the reported
generic chemical name.
Source: TRI_REPORTING_FORM.TRI_CHEM_ID
Reference: Part II, Section 1.1
4
CHEMICAL NAME
Name of the chemical or generic name if the chemical is
claimed as a trade secret.
Source: TRI_REPORTING_FORM.CAS_CHEM_
NAME
Reference: Part II, Section 1.2 or Part II, Section 1.3
CLASSIFICATION
c
Indicates the classification of the chemical. Chemicals
can be classified as either a Dioxin or Dioxin-like
compound, a PBT (Persistent, Bioaccumulative and
Toxic) chemical or a general EPCRA Section 313
chemical.
Values: {TRI, PBT, DIOXIN} where
5
TRI = General EPCRA Section 313 Chem. PBT =
Bioaccumulative and Toxic
DIOXIN = Dioxin or Dioxin-like compound
Source: TRI CTIKM INFO.
CLASSIFICATION
Reference: NONE
10
File Type 6
-------
Mum.
Field Name
Type
Description
6
UNIT OF MEASURE
C
Indicates the unit of measure used to quantify the
chemical. Values: {Pounds, Grams}
Source: TRI CIIKM INK).
UNIT_OF_MEASURE
Reference: NONE
7
DIOXIN DISTRIBUTION 1
N
Indicates the percentage of
1,2,3,4,6,7,8 Heptachlorodibenzofuran
(CAS # 67562-39-4) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_l
Reference: Part II, Section 1.4
8
DIOXIN DISTRIBUTION 2
N
Indicates the percentage of
1,2,3,4,7,8,9 Heptachlorodibenzofuran
(CAS # 55673-89-7) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_2
Reference: Part II, Section 1.4
9
DIOXIN DISTRIBUTION 3
N
Indicates the percentage of
1,2,3,4,7,8 Hexachlorodibenzofuran
(CAS # 70648-26-9) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_3
Reference: Part II, Section 1.4
10
DIOXIN DISTRIBUTION 4
N
Indicates the percentage of
1,2,3,6,7,8 Hexachlorodibenzofuran
(CAS # 57117-44-9) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_4
Reference: Part II, Section 1.4
11
File Type 6
-------
Mum.
Field Name
Type
Description
11
DIOXIN DISTRIBUTION 5
N
Indicates the percentage of
1,2,3,7,8,9 Hexachlorodibenzofuran
(CAS # 72918-21-9) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_5
Reference: Part II, Section 1.4
12
DIOXIN DISTRIBUTION 6
N
Indicates the percentage of
2,3,4,6,7,8 Hexachlorodibenzofuran
(CAS # 60851-34-5) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_6
Reference: Part II, Section 1.4
13
DIOXIN DISTRIBUTION 7
N
Indicates the percentage of
1,2,3,4,7,8 Hexachlorodibenzo- p-dioxin
(CAS # 39227-28-6) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_7
Reference: Part II, Section 1.4
14
DIOXIN DISTRIBUTION 8
N
Indicates the percentage of
1,2,3,6,7,8 Hexachlorodibenzo- p-dioxin
(CAS # 5765385-7) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_8
Reference: Part II, Section 1.4
12
File Type 6
-------
Mum.
Field Name
Type
Description
15
DIOXIN DISTRIBUTION 9
N
Indicates the percentage of
1,2,3,7,8,9 Hexachlorodibenzo- p-dioxin
(CAS # 19408-74-3) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_9
Reference: Part II, Section 1.4
16
DIOXIN DISTRIBUTION 10
N
Indicates the percentage of
1,2,3,4,6,7,8 Heptachlorodibenzo- p-dioxin
(CAS # 35822-46-9) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_10
Reference: Part II, Section 1.4
17
DIOXIN DISTRIBUTION 11
N
Indicates the percentage of
1,2,3,4,6,7,8,9 Octachlorodibenzofuran
(CAS # 39001-02-0) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_l 1
Reference: Part II, Section 1.4
18
DIOXIN DISTRIBUTION 12
N
Indicates the percentage of
1,2,3,4,6,7,8,9 Octachlorodibenzo- p-dioxin
(CAS # 03268-87-9) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_12
Reference: Part II, Section 1.4
13
File Type 6
-------
Mum.
Field Name
Type
Description
19
DIOXIN DISTRIBUTION 13
N
Indicates the percentage of
1,2,3,7,8 Pentachlorodibenzofuran
(CAS # 57117-41-6) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_13
Reference: Part II, Section 1.4
20
DIOXIN DISTRIBUTION 14
N
Indicates the percentage of
2,3,4,7,8 Pentachlorodibenzofuran
(CAS # 57117-31-4) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIB UTION_ 14
Reference: Part II, Section 1.4
21
DIOXIN DISTRIBUTION 15
N
Indicates the percentage of
1,2,3,7,8 Pentachlorodibenzo- p-dioxin
(CAS # 40321-76-4) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_15
Reference: Part II, Section 1.4
22
DIOXIN DISTRIBUTION 16
N
Indicates the percentage of
2,3,7,8 Tetrachlorodibenzofuran
(CAS #51207-31-9) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_16
Reference: Part II, Section 1.4
14
File Type 6
-------
Mum.
Field Name
Type
Description
23
DIOXIN DISTRIBUTION 17
N
Indicates the percentage of
2,3,78 Tetrachlorodibenzo- p-dioxin
(CAS # 01746-01-6) in the reported Dioxin or Dioxin-
like compound. Values are either 0 or a number between
0.01 and 100 (inclusive).
Source: TRI_REPORTING_FORM.
DIOXIN_DISTRIBUTION_17
Reference: Part II, Section 1.4
24
REPORTING YEAR
C
The calendar year in which the reported activities occur.
Source: TRI_REPORTING_FORM.
REPORTIN G_YE AR
Reference: Part I, Section 1
25
TRADE SECRET INDICATOR
C
Indicates whether the reporting facility claims the
identity of the chemical or chemical category as a trade
secret.
Yes = Checked (Trade Secret)
No = Not checked
Note: Only Sanitized Trade Secret submissions are
stored in the TRIS database.
Source: TRI_REPORTING_FORM.
TRADE_SECRET_IND
Reference: Part I, Section 2.1
26
FACILITY NAME
c
Name of the reporting facility.
Source: TRI_FACILITY. FACILITY_NAME
Reference: Part I, Section 4.1
27
FACILITY STREET
c
Street address of the reporting facility.
Source: TRI_FACILITY.STREET_ADDRESS
Reference: Part I, Section 4.1
28
FACILITY CITY
c
City in which the reporting facility is located.
Source: TRI_FACILITY.CITY_NAME
Reference: Part I, Section 4.1
29
FACILITY COUNTY
c
County in which the reporting facility is located.
Source: TRI_FACILITY.COUNT_NAME
Reference: Part I, Section 4.1
30
FACILITY STATE
c
Two-letter state code of the reporting facility.
Source: TRI_FACILITY.STATE_ABBR
Reference: Part I, Section 4.1
15
File Type 6
-------
Mum.
Field Name
Type
Description
31
FACILITY ZIP CODE
C
ZIP code of the reporting facility.
Source: TRI_FACILITY. ZIP_CODE
Reference: Part I, Section 4.1
32
BIA_CODE
C
Three-letter code indicating the tribal land a facility is
on.
Source: FACILITY.BIA_TRIBAL_CODE
33
TRIBE
c
INDIAN_COUNTRY_NAME
The name of the Tribe.
Source: V INDIAN COITRY.
34
ENTIRE FACILITY IND
c
Indicates whether the information covers an entire
facility or part of a facility.
Yes = entire
No = partial
Source: TRI_REPORTING_FORM.ENTIRE_FAC
Reference: Part I, Section 4.2a
35
PARTIAL FACILITY IND
c
Indicates whether the information covers an entire
facility or part of a facility.
Yes = entire
No = partial
Source: TRI_REPORTING_FORM. PARTIAL_FAC
Reference: Part I, Section 4.2b
36
FEDERAL FACILITY IND
c
Code indicating whether a facility is Federal or not.
Yes = Federal
No = non-Federal or GOCO
Value reported by facility.
Source:
TRI_REPORTING_FORM.FEDERAL_FAC_IND
Form R: Part I Section 4.2c
37
GOCO FACILITY IND
c
Code indicating whether a facility is GOCO
(Government-Owned, Contractor-Operated) facility or
not:
Yes = GOCO
No = non-GOCO
Source: TRI_REPORTING_FORM.GOCO_
FLAG
Form R: Part I Section 4.2d
16
File Type 6
-------
Mum.
Field Name
Type
Description
38
PRIMARY SIC CODE
C
Primary four-digit Standard Industrial Classification
(SIC) Code.
Source: TRI_SUBMISSION_SIC.SIC_CODE
Reference: Part I, Section 4.5 a
39
SIC CODE 2
C
Second four-digit Standard Industrial Classification
(SIC) Code entered by facility.
Source: TRI_SUBMISSION_SIC.SIC_CODE
Reference: Part I, Section 4.5b
40
SIC CODE 3
c
Third four-digit Standard Industrial Classification (SIC)
Code entered by facility.
Source: TRI_SUBMISSION_SIC.SIC_CODE
Reference: Part I, Section 4.5c
41
SIC CODE 4
c
Fourth four-digit Standard Industrial Classification (SIC)
Code entered by facility.
Source: TRI_SUBMISSION_SIC.SIC_CODE
Reference: Part I, Section 4.5d
42
SIC CODE 5
c
Fifth four-digit Standard Industrial Classification (SIC)
Code entered by facility.
Source: TRI_SUBMISSION_SIC.SIC_CODE
Reference: Part I, Section 4.5e
43
SIC CODE 6
c
Sixth four-digit Standard Industrial Classification (SIC)
Code entered by facility.
Source: TRI_SUBMISSION_SIC.SIC_CODE
Reference: Part I, Section 4.5f
44
NAICS ORIGIN
c
Indicates whether NAICS codes were reported or
assigned.
R = Reported
A = Assigned
45
PRIMARY NAICS CODE
c
Primary six-digit North American Standard Industry
Classification System (NAICS) Code.
Source: TRI_SUBMISSION_NAICS.NAICS_CODE
Where: primary_ind => 1
Reference: Part I, Section 4.5 a
46
NAICS CODE 2
c
Second six-digit North American Standard Industry
Classification System (NAICS) Code entered by facility.
Source: TRI_SUBMISSION_NAICS.NAICS_CODE
Where: naics_sequence_num = 2
Reference: Part I, Section 4.5b
17
File Type 6
-------
Mum.
Field Name
Type
Description
47
NAICS CODE 3
C
Third six-digit North American Standard Industry
Classification System (NAICS) Code entered by facility.
Source: TRI_SUBMISSION_NAICS.NAICS_CODE
Where: naics_sequence_num = 3
Reference: Part I, Section 4.5b
48
NAICS CODE 4
C
Forth six-digit North American Standard Industry
Classification System (NAICS) Code entered by facility.
Source: TRI_SUBMISSION_NAICS.NAICS_CODE
Where: naics_sequence_num = 4
Reference: Part I, Section 4.5b
49
NAICS CODE 5
c
Fifth six-digit North American Standard Industry
Classification System (NAICS) Code entered by facility.
Source: TRI_SUBMISSION_NAICS.NAICS_CODE
Where: naics_sequence_num = 5
Reference: Part I, Section 4.5b
50
NAICS CODE 6
c
Sixth six-digit North American Standard Industry
Classification System (NAICS) Code entered by facility.
Source: TRI_SUBMISSION_NAICS.NAICS_CODE
Where: naics_sequence_num = 6
Reference: Part I, Section 4.5b
51
LATITUDE
N
The Latitude value that best represents the facility
according to EPA's Facility Registry System (FRS). In
RY 2005, TRI stopped collecting the Latitude value and
began obtaining it from FRS. Format: signed 2 digit
whole number, 6 digit decimal positions (+nn.nnnnnn).
Source: EPA's Facility Registry System
52
LONGITUDE
N
The Longitude value that best represents the facility
according to EPA's Facility Registry System (FRS). In
RY 2005, TRI stopped collecting the Longitude value
and began obtaining it from FRS. (Format: signed 3 digit
whole number, 6 digit decimal positions +nnn.nnnnnn).
Source: EPA's Facility Registry System
53
D&B NR A
C
Unique identification number assigned by Dun and
Bradstreet to the reporting facility.
Source: TRI_FACILITY_DB.DB_NUM
Reference: Part I, Section 4.7a
18
File Type 6
-------
Mum.
Field Name
Type
Description
54
D&B NR B
C
Unique identification number assigned by Dun and
Bradstreet to the reporting facility.
Source: TRI_FACILITY_DB.DB_NUM
Reference: Part I, Section 4.7b
55
RCRA NR A
C
Twelve-digit alphanumeric identifier assigned by EPA
under the resource Conservation and Recovery Act. In
RY 2005, TRI stopped collecting RCRA Ids and began
obtaining them from EPA's Facility Registry System
(FRS).
Source: EPA's Facility Registry System
56
RCRA NR B
c
Twelve-digit alphanumeric identifier assigned by EPA
under the resource Conservation and Recovery Act. In
RY 2005, TRI stopped collecting RCRA Ids and began
obtaining them from EPA's Facility Registry System
(FRS).
Source: EPA's Facility Registry System
57
NPDES NR A
c
Nine-digit alphanumeric identifier assigned to a facility
under EPA's National Pollutant Discharge Elimination
System. In RY 2005, TRI stopped collecting NPDES
Ids and began obtaining them from EPA's Facility
Registry System (FRS).
Source: EPA's Facility Registry System
58
NPDES NR B
c
Nine-digit alphanumeric identifier assigned to a facility
under EPA's National Pollutant Discharge Elimination
System. In RY 2005, TRI stopped collecting NPDES
Ids and began obtaining them from EPA's Facility
Registry System (FRS).
Source: EPA's Facility Registry System
59
UIC NR A
c
Underground injection identification number, assigned
by EPA or the state, to a facility. In RY 2005, TRI
stopped collecting UIC Ids and began obtaining them
from EPA's Facility Registry System (FRS). Source:
EPA's Facility Registry System
60
UIC NR B
c
Underground injection identification number, assigned
by EPA or the state, to a facility. In RY 2005, TRI
stopped collecting UIC Ids and began obtaining them
from EPA's Facility Registry System (FRS). Source:
EPA's Facility Registry System
19
File Type 6
-------
Mum.
Field Name
Type
Description
61
PARENT COMPANY NAME
C
Name of the corporation or other business entity that
owns or controls the reporting facility.
Source: TRI_FACILITY.PARENT_CO_
NAME
Reference: Part I, Section 5.1
62
PARENT COMPANY D&B NR
C
Unique identification number assigned by Dun and
Bradstreet to the parent company of the reporting
facility.
Source: TRI_FACILITY.PARENT_CO_
DB_NUM
Reference: Part I, Section 5.2
63
OFF-SITE RCRA ID NR
c
The identification number assigned to the off-site
disposal facility covered by regulations of the resource
Conservation and Recovery Act (RCRA) and other
regulations of the Superfund Act (CERCLA).
Source:
TRI_OFF_SITE_TRANSFER_LOCATION.RCRA_
NUM
Reference: Part II, Section 6.2
64
OFF-SITE TRANSFER
SEQUENCE NUMBER
c
This field contains a sequence number assigned to an
off-site location.
Source: TRI_OFF_SITE_TRANSFER_LOCATION.
TR AN SFER_LOC_NUM
Reference: NA (System generated)
65
OFF-SITE NAME
c
The name of the off-site treatment or disposal location to
which the chemical is sent.
Source: TRI_OFF_SITE_TRANSFER_LOCATIO.
OFF_SITE_ NAME
Reference: Part II, Section 6.2
66
OFF-SITE STREET ADDRESS
c
The address of the off-site disposal or treatment facility.
Source: TRI_OFF_SITE_TRANSFER_LOCATION.
OFF_SITE_STREET
Reference: Part II, Section 6.2
67
OFF-SITE CITY
c
The city in which the off-site transfer or disposal site is
located.
Source: TRI_OFF_SITE_TRANSFER_LOCATION.
CITY_NAME
Reference: Part II, Section 6.2
20
File Type 6
-------
Mum.
Field Name
Type
Description
68
OFF-SITE COUNTY
C
The county in which the off-site treatment or disposal
site is located.
Source: TRI_OFF_SITE_TRANSFER_LOCATION.
COUNTY_NAME
Reference: Part II, Section 6.2
69
OFF-SITE STATE
C
The two-letter state abbreviation of the off-site
treatment or disposal site.
Source: TRI_OFF_SITE_TRANSFER_LOCATION.
STATE_ABBR
Reference: Part II, Section 6.2
70
OFF-SITE PROVINCE
c
Province of the reporting facility's mailing address.
Source:
TRI_OFF_SITE_TRANSFER_LOCATION.PROVIN
CE
Reference: Part I, Section 4.1
71
OFF-SITE ZIPCODE
c
The zip code used in the address of an off-site treatment
or disposal site.
Source: TRI_OFF_SITE_TRANSFER_LOCATION.
ZIP_CODE
Reference: Part II, Section 6.2
72
OFF-SITE COUNTRY ID
c
If the off-site facility is out of the country, this field
contains the name of the country to which the transfer is
sent.
Source:
TRI_OFF_SITE_TRANSFER_LOCATION.COUNT
RY_ CODE
Reference: Part II, Section 6.2
73
OFF-SITE CONTROL
c
This field indicates whether the off-site location to
which toxic chemical wastes are transferred is owned or
controlled by the facility or parent company. Value is
Ayes0 or Ano0.
Source: TRI_OFF_SITE_TRANSFER_LOCATION.
CONTROLLED_LOC
Reference: Part II, Section 6.2
21
File Type 6
-------
Mum.
Field Name
Type
Description
74
XFERS OFF-SITE POUNDS -
STORAGE M10
N
An estimate of the total quantity in pounds of reported
chemical contained in the waste transferred to off-site
facilities for storage (M10). Range codes may be used
for transfers of less than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
75
XFERS OFF-SITE RANGE CODE-
STORAGE M10
C
Code used to indicate the amount of the toxic chemical
transferred to off-site facilities for storage (M10) within
a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
76
TOTAL XFERS OFF-SITE
AMOUNT- STORAGE M10
N
System generated total quantity in pounds of reported
chemical contained in the waste transferred to off-site
facilities for storage (M10). If field number 64 is not
blank, its contents are used as the total. If it is blank, the
middle of the range for the code used in field number 65
is used for the total value.
Source: TRI_TRANSFER_QTY.TRANSFER_
TOTAL or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
22
File Type 6
-------
Mum.
Field Name
Type
Description
BASIS OF ESTIMATE M10
C
A code indicating the principal method by which the
total storage estimate was calculated. The codes and
corresponding methods are:
77
C = mass balance calculations
E = published emission factors
El = published emission factors
E2 = on site-specific emission factors
M = monitoring data
Ml = continuous monitoring data
M2 = periodic/random monitoring data
NA = not applicable
0 = other
X = invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
78
XFERS OFF-SITE POUNDS -
SOLIDIFICATION/STAB ILIZATI
ON (METALS) M41
N
An estimate of the total quantity in pounds of reported
chemical contained in the waste transferred to off-site
facilities for solidification/stabilization (metals) (M41).
Range codes may be used for transfers of less than 1000
lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
79
XFERS OFF-SITE RANGE CODE
SOLIDIFICATION/STAB ILIZATI
ON (METALS) M41
C
The code used to indicate the amount of the toxic
chemical transferred to off-site facilities for
solidification/stabilization (metals) (M41) within a
range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
23
File Type 6
-------
Field Name
Mum.
Type
Description
TOTAL XFERS OFF-SITE
AMOUNT -
SOLIDIFICATION/STAB ILIZATI
ON (METALS) M41
N
80
System generated total quantity in pounds of reported
chemical contained in the waste transferred to off-site
facilities for solidification/stabilization (metals) (M41).
If field number 68 is not blank, its contents are used as
the total. If it is blank, the middle of the range for the
code used in field number 69 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M41
C
A code indicating the principal method by which the
total solidification/stabilization (metals) estimate was
81
calculated.
The codes and corresponding methods are:
C =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
0 =
other
X =
invalid data
Source:
tri_transfer_qty.transfer_basis_est_c
ODE
Reference: Part II, Section 6.2B
82
XFERS OFF-SITE POUNDS
WASTEWATER TRTMT
(METALS) M62
N
An estimate of the total quantity in pounds of reported
chemical contained in the waste transferred to off-site
wastewater treatment (metals) (M62). Range codes may
be used for transfers of less than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
24
File Type 6
-------
Field Name
Mum.
Type
Description
XFERS OFF-SITE RANGE CODE
- WASTEWATER TRTMT
(METALS) M62
C
83
Code used to indicate the amount of the toxic chemical
transferred to off-site wastewater treatment (metals)
(M62) within a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
TOTAL XFERS OFF-SITE
AMOUNT - WASTEWATER
TRTMT (METALS) M62
N
84
System generated total quantity in pounds of reported
chemical contained in the waste transferred to off-site
wastewater treatment (metals) (M62). If field number 72
is not blank, its contents are used as the total. If it is
blank, the middle of the range for the code used in field
number 73 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M62
C
A code indicating the principal method by which the
total waste water treatment (metals) (M62) estimate was
85
calculated.
The codes and corresponding methods are:
C =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
0 =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
25
File Type 6
-------
Mum.
Field Name
Type
Description
86
XFERS OFF-SITE
UNDERGROUND INJECTION
POUNDS M71
N
An estimate of the total quantity in pounds of reported
chemical contained in the waste transferred to off-site
underground injection (M71). Range codes may be used
for transfers of less than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
87
XFERS OFF-SITE
UNDERGROUND INJECTION
RANGE CODE M71
C
Code used to indicate the amount of the toxic chemical
transferred to off-site underground injection (M71)
within a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
88
TOTAL UNDERGROUND
INJECTION AMOUNT M71
N
System generated total quantity in pounds of reported
chemical contained in the waste transferred to off-site
underground injection (M71). If field number 76 is not
blank, its contents are used as the total. If it is blank, the
middle of the range for the code used in field number 77
is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
26
File Type 6
-------
Field Name
Mum.
Type
Description
BASIS OF ESTIMATE M71
C
A code indicating the principal method by which the
total underground injection (M71) estimate was
89
calculated.
The codes and corresponding methods are:
C =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
O =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
90
XFERS OFF-SITE
LANDFILLS/DISPOSAL
SURFACE IMPOUNDMENT
POUNDS M72
N
An estimate of the total quantity in pounds of reported
chemical contained in the waste transferred to
landfill/disposal surface impoundment ponds (M72).
Range codes may be used for transfers of less than 1000
lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
XFERS OFF-SITE
LANDFILLS/DISPOSAL
SURFACE IMPOUNDMENT
RANGE CODE M72
C
91
Code used to indicate the amount of the toxic chemical
transferred to landfill/disposal surface impoundment
ponds (M72) within a range. If none, the submitter
enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
27
File Type 6
-------
Field Name
Mum.
Type
Description
TOTAL LANDFILLS/DISPOSAL
SURFACE IMPOUNDMENT
AMOUNT M72
N
92
System generated total quantity in pounds of reported
chemical contained in the waste transferred to
landfill/disposal surface impoundment ponds (M72). If
field number 81 is not blank, its contents are used as the
total. If it is blank, the middle of the range for the code
used in field number 82 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M72
C
A code indicating the principal method by which the
total landfill/disposal surface impoundment (M72)
estimate was calculated. The codes and corresponding
methods are:
93
c =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
0 =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference:
Part II, Section 6.2B
94
XFERS OFF-SITE SURFACE
IMPOUNDMENT
POUNDS M63
N
An estimate of the total quantity in pounds of reported
chemical contained in the waste subjected transferred
off-site for surface impoundment (M63). Range codes
may be used for transfers of less than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
28
File Type 6
-------
Mum.
Field Name
Type
Description
95
SURFACE IMPOUNDMENT
RANGE CODE M63
C
Code used to indicate the amount of the toxic chemical
transferred off-site for surface impoundment (M63)
within a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
96
SURFACE IMPOUNDMENT
TOTAL AMOUNT M63
N
System generated total quantity in pounds of reported
chemical contained in the waste transferred off-site for
surface impoundment (M63). If field number 84 is not
blank, its contents are used as the total. If it is blank, the
middle of the range for the code used in field number 85
is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M63
C
A code indicating the principal method by which the
total surface impoundment (M63) estimate was
calculated. The codes and corresponding methods are:
97
C = mass balance calculations
E = published emission factors
El = published emission factors
E2 = on site-specific emission factors
M = monitoring data
Ml = continuous monitoring data
M2 = periodic/random monitoring data
NA = not applicable
0 = other
X = invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
29
File Type 6
-------
Mum.
Field Name
Type
Description
98
XFERS OFF-SITE
OTHER LANDFILLS POUNDS
M64
N
An estimate of the total quantity in pounds of reported
chemical contained in the waste transferred to other
landfills (M64). Range codes may be used for transfers
of less than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
99
OTHER LANDFILLS RANGE
CODE M64
C
Code used to indicate the amount of the toxic chemical
transferred to other landfills (M64) within a range. If
none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
100
OTHER LANDFILLS TOTAL
AMOUNT M64
N
System generated total quantity in pounds of reported
chemical contained in the waste transferred to other
landfills (M64). If field number 88 is not blank, its
contents are used as the total. If it is blank, the middle of
the range for the code used in field number 89 is used for
the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
30
File Type 6
-------
Field Name
Mum.
Type
Description
BASIS OF ESTIMATE M64
C
A code indicating the principal method by which the
total other landfill (M64) estimate was calculated. The
codes and corresponding methods are:
101
c =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
O =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference:
Part II, Section 6.2B
102
XFERS OFF-SITE
RCRA SUBTITLE C LANDFILLS
POUNDS M65
N
An estimate of the total quantity in pounds of reported
chemical contained in the waste transferred off-site to
RCRA subtitle C Landfills (M65). Range codes may be
used for transfers of less than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
RCRA SUBTITLE C LANDFILLS
RANGE CODE M65
C
103
Code used to indicate the amount of the toxic chemical
transferred off-site to RCRA subtitle C landfills (M65)
within a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
31
File Type 6
-------
Field Name
Mum.
Type
Description
RCRA SUBTITLE C LANDFILLS
TOTAL AMOUNT M65
N
104
System generated total quantity in pounds of reported
chemical contained in the waste transferred off-site to
RCRA subtitle C landfills (M65). If field number 92 is
not blank, its contents are used as the total. If it is blank,
the middle of the range for the code used in field number
93 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M65
C
A code indicating the principal method by which the
transfers to RCRA subtitle C landfills (M65) estimate
was calculated. The codes and corresponding methods
105
are:
C =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
O =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
LAND TREATMENT POUNDS
M73
N
106
An estimate of the total quantity in pounds of reported
chemical contained in the waste subjected to land
treatment (M73). Range codes may be used for transfers
of less than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
32
File Type 6
-------
Field Name
Mum.
Type
Description
LAND TREATMENT RANGE
CODE M73
C
107
Code used to indicate the amount of the toxic chemical
subjected to land treatment (M73) within a range. If
none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
TOTAL LAND TREATMENT
TOTAL AMOUNT M73
N
108
System generated total quantity in pounds of reported
chemical contained in the waste subjected to land
treatment (M73). If field number 96 is not blank, its
contents are used as the total. If it is blank, the middle of
the range for the code used in field number 97 is used for
the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M73
C
A code indicating the principal method by which the
total land treatment (M73) estimate was calculated. The
codes and corresponding methods are:
109
c =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
O =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
33
File Type 6
-------
Mum.
Field Name
Type
Description
110
OTHER LAND DISPOSAL
POUNDS M79
N
An estimate of the total quantity in pounds of reported
chemical contained in the waste subjected to other land
disposal (M79). Range codes may be used for transfers
of less than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
111
OTHER LAND DISPOSAL
RANGE CODE M79
C
Code used to indicate the amount of the toxic chemical
subjected to other land disposal (M79) within a range. If
none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
112
TOTAL OTHER LAND
DISPOSAL AMOUNT M79
N
System generated total quantity in pounds of reported
chemical subjected to other land disposal (M79). If field
number 100 is not blank, its contents are used as the
total. If it is blank, the middle of the range for the code
used in field number 101 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
34
File Type 6
-------
Field Name
Mum.
Type
Description
BASIS OF ESTIMATE M79
C
A code indicating the principal method by which the
total land disposal (M79) estimate was calculated. The
codes and corresponding methods are:
113
c =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
O =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference:
Part II, Section 6.2B
OTHER OFF-SITE
MANAGEMENT POUNDS M90
N
114
An estimate of the total quantity in pounds of reported
chemical subjected to other off-site management (M90).
Range codes may be used for transfers of less than 1000
lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
OTHER OFF-SITE
MANAGEMENT RANGE CODE
M90
C
115
Code used to indicate the amount of the toxic chemical
subjected to other off-site management (M90) within a
range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
35
File Type 6
-------
Mum.
Field Name
Type
Description
116
TOTAL OTHER OFF-SITE
MANAGEMENT AMOUNT M90
N
System generated total quantity in pounds of reported
chemical contained in the waste subjected to other off-
site management (M90). If field number 104 is not
blank, its contents are used as the total. If it is blank, the
middle of the range for the code used in field number
105 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M90
C
A code indicating the principal method by which the
total other off-site management (M90) estimate was
calculated. The codes and corresponding methods are:
117
C = mass balance calculations
E = published emission factors
El = published emission factors
E2 = on site-specific emission factors
M = monitoring data
Ml = continuous monitoring data
M2 = periodic/random monitoring data
NA = not applicable
0 = other
X = invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
118
TRANSFER TO WASTE
BROKER-DISPOSAL POUNDS
M94
N
An estimate of the total quantity in pounds of reported
chemical subjected to waste broker disposal (M94).
Range codes may be used for transfers of less than 1000
lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
36
File Type 6
-------
Field Name
Mum.
Type
Description
TRANSFER TO WASTE
BROKER-DISPOSAL RANGE
CODE M94
C
119
Code used to indicate the amount of the toxic chemical
subjected to waste broker disposal (M94) within a
range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
TOTAL TRANSFER TO WASTE
BROKER-DISPOSAL AMOUNT
M94
N
120
System generated total quantity in pounds of reported
chemical contained in the waste subjected to waste
broker disposal (M94). If field number 108 is not blank,
its contents are used as the total. If it is blank, the
middle of the range for the code used in field number
109 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M94
C
A code indicating the principal method by which the
total waste broker disposal (M94) estimate was
121
calculated.
The codes and corresponding methods are:
C =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
O =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
37
File Type 6
-------
Mum.
Field Name
Type
Description
122
UNKNOWN POUNDS M99
N
An estimate of the total quantity in pounds of reported
chemical transported off-site for unknown processing
(M99). Range codes may be used for transfers of less
than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
123
UNKNOWN RANGE CODE M99
C
Code used to indicate the amount of the toxic chemical
transported off-site for unknown processing (M99)
within a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
124
TOTAL UNKNOWN AMOUNT
M99
N
System generated total quantity in pounds of reported
chemical transported off-site for unknown processing
(M99). If field number 112 is not blank, its contents are
used as the total. If it is blank, the middle of the range
for the code used in field number 113 is used for the
total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
38
File Type 6
-------
Mum.
Field Name
Type
Description
BASIS OF ESTIMATE M99
C
Code indicating the principal method by which the
unknown processing (M99) estimate is calculated.
A code indicating the principal method by which the
unknown processing (M99) estimate was calculated.
The codes and corresponding methods are:
125
C = mass balance calculations
E = published emission factors
El = published emission factors
E2 = on site-specific emission factors
M = monitoring data
Ml = continuous monitoring data
M2 = periodic/random monitoring data
NA = not applicable
0 = other
X = invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
126
TOTAL AMOUNT
TRANSFERRED OFF-SITE FOR
DISPOSAL
N
Total, in pounds, of toxic chemical reported transferred
off-site for disposal. Sum of columns
(66+70+74+78+82+86+90+94+98+102+106+110+114
+174+178+182+186).
Source: System generated
Reference: None
127
XFERS OFF-SITE POUNDS -
SOLIDIFICATION/
STABILIZATION M40
N
An estimate of the total quantity in pounds of reported
chemical transported off-site for
solidification/stabilization (M40). Range codes may be
used for transfers of less than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
128
XFERS OFF-SITE RANGE CODE
- SOLIDIFICATION/
STABILIZATION M40
C
Code used to indicate the amount of the toxic chemical
transported off-site for solidification/ stabilization (M40)
within a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
39
File Type 6
-------
Field Name
Mum.
Type
Description
TOTAL XFERS OFF-SITE
AMOUNT -
SOLIDIFICATION/STAB ILIZATI
ONM40
N
129
System generated total quantity in pounds of reported
chemical transported off-site for
solidification/stabilization (M40). If field number 117 is
not blank, its contents are used as the total. If it is blank,
the middle of the range for the code used in field number
118 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M40
C
A code indicating the principal method by which the
total off-site solidification / stabilization (M40) estimate
was calculated. The codes and corresponding methods
130
are:
C =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
O =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
131
XFERS OFF-SITE POUNDS -
INCINERATION/ THERMAL
TREATMENT M50
N
An estimate of the total quantity in pounds of reported
chemical transported off-site for incineration/thermal
treatment (M50). Range codes may be used for transfers
of less than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
40
File Type 6
-------
Field Name
Mum.
Type
Description
XFERS OFF-SITE RANGE CODE
- INCINERATION/ THERMAL
TREATMENT M50
C
132
Code used to indicate the amount of the toxic chemical
transported off-site for incineration/thermal treatment
(M50) within a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
TOTAL XFERS OFF-SITE
AMOUNT - INCINERATION/
THERMAL TREATMENT M50
N
134
System generated total quantity in pounds of reported
chemical transported off-site for incineration/thermal
treatment (M50). If field number 121 is not blank, its
contents are used as the total. If it is blank, the middle of
the range for the code used in field number 122 is used
for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M50
C
A code indicating the principal method by which the off-
site incineration / thermal treatment (M50) estimate was
135
calculated.
The codes and corresponding methods are:
C =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
0 =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
41
File Type 6
-------
Mum.
Field Name
Type
Description
136
XFERS OFF-SITE POUNDS -
INCINERATION/
INSIGNIFICANT FUEL VALUE
M54
N
An estimate of the total quantity in pounds of reported
chemical transported off-site for
incineration/insignificant fuel value (M54). Range codes
may be used for transfers of less than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
137
XFERS OFF-SITE RANGE CODE
- INCINERATION/
INSIGNIFICANT FUEL VALUE
M54
C
Code used to indicate the amount of the toxic chemical
transported off-site for incineration/ insignificant fuel
value (M54) within a range. If none, the submitter
enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
138
TOTAL XFERS OFF-SITE
AMOUNT - INCINERATION/
INSIGNIFICANT FUEL VALUE
M54
N
System generated total quantity in pounds of reported
chemical transported off-site for
incineration/insignificant fuel value (M54). If field
number 125 is not blank, its contents are used as the
total. If it is blank, the middle of the range for the code
used in field number 126 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
42
File Type 6
-------
Mum.
Field Name
Type
Description
BASIS OF ESTIMATE M54
C
A code indicating the principal method by which the
transported off-site for incineration / insignificant fuel
value (M54) estimate was calculated. The codes and
corresponding methods are:
139
C = mass balance calculations
E = published emission factors
El = published emission factors
E2 = on site-specific emission factors
M = monitoring data
Ml = continuous monitoring data
M2 = periodic/random monitoring data
NA = not applicable
0 = other
X = invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
140
XFERS OFF-SITE POUNDS -
WASTEWATER TREATMENT
(EXCLUDING POTW) M61
N
An estimate of the total quantity in pounds of reported
chemical contained in the waste transferred to off-site
wastewater treatment (excluding POTW) (M61). Range
codes may be used for transfers of less than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A1
141
XFERS OFF-SITE RANGE CODE
- WASTEWATER TREATMENT
M61
C
Code used to indicate the amount of the toxic chemical
transferred to off-site wastewater treatment (excluding
POTW) (M61) within a range. If none, the submitter
enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A1
43
File Type 6
-------
Field Name
Mum.
Type
Description
TOTAL XFERS OFF-SITE
AMOUNT - WASTEWATER
TREATMENT M61
N
142
System generated total quantity in pounds of reported
chemical contained in the waste transferred to off-site
wastewater treatment (excluding POTW) (M61). If field
number 129 is not blank, its contents are used as the
total. If it is blank, the middle of the range for the code
used in field number 130 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M61
C
A code indicating the principal method by which the
total wastewater treatment (excluding POTW) (M61)
estimate was calculated. The codes and corresponding
methods are:
143
c =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
0 =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference:
Part II, Section 6.2B
144
XFERS OFF-SITE POUNDS -
OTHER WASTE TREATMENT
M69
N
An estimate of the total quantity in pounds of reported
chemical subjected to other off-site waste treatment
(M69). Range codes may be used for transfers of less
than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
44
File Type 6
-------
Field Name
Mum.
Type
Description
XFERS OFF-SITE RANGE CODE
- OTHER WASTE TREATMENT
M69
C
145
Code used to indicate the amount of the toxic chemical
subjected to other off-site waste treatment (M69) within
a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
TOTAL XFERS OFF-SITE
AMOUNT - OTHER WASTE
TREATMENT M69
N
146
System generated total quantity in pounds of reported
chemical contained in the waste subjected to other off-
site waste treatment (M69). If field number 133 is not
blank, its contents are used as the total. If it is blank, the
middle of the range for the code used in field number
134 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M69
C
A code indicating the principal method by which the
total other off-site waste treatment (M69) estimate was
147
calculated.
The codes and corresponding methods are:
C =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
0 =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
45
File Type 6
-------
Mum.
Field Name
Type
Description
148
XFERS OFF-SITE POUNDS -
TRANSFER TO WASTE
BROKER-WASTE TREATMENT
M95
N
An estimate of the total quantity in pounds of reported
chemical subjected to waste broker for treatment (M95).
Range codes may be used for transfers of less than 1000
lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
149
XFERS OFF-SITE RANGE CODE
- TRANSFER TO WASTE
BROKER-WASTE TREATMENT
M95
C
Code used to indicate the amount of the toxic chemical
subjected to waste broker for treatment (M95) within a
range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
150
TOTAL XFERS OFF-SITE
AMOUNT - TRANSFER TO
WASTE BROKER-WASTE
TREATMENT M95
N
System generated total quantity in pounds of reported
chemical contained in the waste subjected to waste
broker for treatment (M95). If field number 137 is not
blank, its contents are used as the total. If it is blank, the
middle of the range for the code used in field number
138 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
46
File Type 6
-------
Mum.
Field Name
Type
Description
BASIS OF ESTIMATE M95
C
A code indicating the principal method by which the
waste broker disposal (M94) estimate was calculated.
The codes and corresponding methods are:
151
C = mass balance calculations
E = published emission factors
El = published emission factors
E2 = on site-specific emission factors
M = monitoring data
Ml = continuous monitoring data
M2 = periodic/random monitoring data
NA = not applicable
0 = other
X = invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
152
TOTAL AMOUNT
TRANSFERRED OFF-SITE FOR
TREATMENT
N
Total, in pounds, of toxic chemical reported transferred
off-site for treatment. Sum of columns
(119+123+127+131+135+139).
Source: System generated
Reference: None
153
XFERS OFF-SITE POUNDS -
ENERGY RECOVERY M56
N
An estimate of the total quantity in pounds of reported
chemical sent off-site for energy recovery (M56).
Range codes may be used for transfers of less than 1000
lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
154
XFERS OFF-SITE RANGE CODE
-ENERGY RECOVERY M56
C
Code used to indicate the amount of the toxic chemical
sent off-site for energy recovery (M56) within a range.
If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
47
File Type 6
-------
Mum.
Field Name
Type
Description
155
TOTAL XFERS OFF-SITE
AMOUNT - ENERGY
RECOVERY M56
N
System generated total quantity in pounds of reported
chemical contained in the waste sent off-site for energy
recovery (M56). If field number 142 is not blank, its
contents are used as the total. If it is blank, the middle of
the range for the code used in field number 143 is used
for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M56
C
A code indicating the principal method by which the off-
site energy recovery (M56) estimate was calculated. The
codes and corresponding methods are:
156
C = mass balance calculations
E = published emission factors
El = published emission factors
E2 = on site-specific emission factors
M = monitoring data
Ml = continuous monitoring data
M2 = periodic/random monitoring data
NA = not applicable
0 = other
X = invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
157
XFERS OFF-SITE POUNDS -
TRANSFER TO WASTE
BROKER-ENERGY RECOVERY
M92
N
An estimate of the total quantity in pounds of reported
chemical sent to a waste broker for energy recovery
(M92). Range codes may be used for transfers of less
than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
48
File Type 6
-------
Mum.
Field Name
Type
Description
158
XFERS OFF-SITE RANGE CODE
- TRANSFER TO WASTE
BROKER-ENERGY RECOVERY
M92
C
Code used to indicate the amount of the toxic chemical
sent to a waste broker for energy recovery (M92) within
a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
159
TOTAL XFERS OFF-SITE
AMOUNT - TRANSFER TO
WASTE-BROKER-ENERGY
RECOVERY M92
N
System generated total quantity in pounds of reported
chemical sent to a waste broker for energy recovery
(M92). If field number 146 is not blank, its contents are
used as the total. If it is blank, the middle of the range
for the code used in field number 147 is used for the
total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M92
C
A code indicating the principal method by which the
amount sent to a waste broker for energy recovery (M92)
estimate was calculated. The codes and corresponding
methods are:
160
C = mass balance calculations
E = published emission factors
El = published emission factors
E2 = on site-specific emission factors
M = monitoring data
Ml = continuous monitoring data
M2 = periodic/random monitoring data
NA = not applicable
0 = other
X = invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
161
TOTAL AMOUNT
TRANSFERRED OFF-SITE FOR
ENERGY RECOVERY
N
Total, in pounds, of toxic chemical reported transferred
off-site for energy recovery (144 + 148).
Source: System generated
Reference: None
49
File Type 6
-------
Mum.
Field Name
Type
Description
162
XFERS OFF-SITE POUNDS -
SOT VENTS/ORGANICS
RECOVERY M20
N
An estimate of the total quantity in pounds of reported
chemical sent off-site for solvents/ organics recovery
(M20). Range codes may be used for transfers of less
than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
163
XFERS OFF-SITE RANGE CODE
- S OTVENTS/ORGANIC S
RECOVERY M20
C
Code used to indicate the amount of the toxic chemical
sent off-site for solvents/organics recovery (M20) within
a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
164
TOTAL XFERS OFF-SITE
AMOUNT -
SOLVENTS/ORGANICS
RECOVERY M20
N
System generated total quantity in pounds of reported
chemical contained in the waste off-site for
solvents/organics recovery (M20). If field number 151
is not blank, its contents are used as the total. If it is
blank, the middle of the range for the code used in field
number 152 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
50
File Type 6
-------
Mum.
Field Name
Type
Description
BASIS OF ESTIMATE M20
C
A code indicating the principal method by which the
amount sent off-site for solvents / organics recovery
(M20) estimate was calculated. The codes and
corresponding methods are:
165
C = mass balance calculations
E = published emission factors
El = published emission factors
E2 = on site-specific emission factors
M = monitoring data
Ml = continuous monitoring data
M2 = periodic/random monitoring data
NA = not applicable
0 = other
X = invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
166
XFERS OFF-SITE POUNDS -
METALS RECOVERY M24
N
An estimate of the total quantity in pounds of reported
chemical sent off-site for metals recovery (M24).
Range codes may be used for transfers of less than 1000
lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
167
XFERS OFF-SITE RANGE CODE
- METALS RECOVERY M24
C
Code used to indicate the amount of the toxic chemical
sent off-site for metals recovery (M24) within a range.
If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
51
File Type 6
-------
Field Name
Mum.
Type
Description
TOTAL XFERS OFF-SITE
AMOUNT - METALS
RECOVERY M24
N
168
System generated total quantity in pounds of reported
chemical contained in the waste off-site for off-site for
metals recovery (M24). If field number 155 is not
blank, its contents are used as the total. If it is blank, the
middle of the range for the code used in field number
156 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M24
C
A code indicating the principal method by which the
amount sent off-site for metals recovery (M24) estimate
was calculated. The codes and corresponding methods
169
are:
C =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
0 =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
170
XFERS OFF-SITE POUNDS -
OTHER REUSE OR RECOVERY
M26
N
An estimate of the total quantity in pounds of reported
chemical sent off-site for other reuse or recovery (M26).
Range codes may be used for transfers of less than 1000
lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
52
File Type 6
-------
Field Name
Mum.
Type
Description
XFERS OFF-SITE RANGE CODE
- OTHER REUSE OR RECOVERY
M26
C
171
This field provides the code used to indicate the amount
of the toxic chemical sent off-site for other reuse or
recovery (M26) within a range. If none, the submitter
enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
TOTAL XFERS OFF-SITE
AMOUNT - OTHER REUSE OR
RECOVERY M26
N
172
System generated total quantity in pounds of reported
chemical contained in the waste off-site for other reuse
or recovery (M26). If field number 159 is not blank, its
contents are used as the total. If it is blank, the middle of
the range for the code used in field number 160 is used
for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M26
C
A code indicating the principal method by which the
amount for sent off-site for other reuse or recovery
(M26) estimate was calculated. The codes and
corresponding methods are:
173
c =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
0 =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
53
File Type 6
-------
Mum.
Field Name
Type
Description
174
XFERS OFF-SITE POUNDS -
ACID REGENERATION M28
N
An estimate of the total quantity in pounds of reported
chemical sent off-site for acid regeneration (M28).
Range codes may be used for transfers of less than 1000
lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
175
XFERS OFF-SITE RANGE CODE
- ACID REGENERATION M28
C
Code used to indicate the amount of the toxic chemical
sent off-site for acid regeneration (M28) within a range.
If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.POUND_RANGE_
CODE
Reference: Part II, Section 6.2A
176
TOTAL XFERS OFF-SITE
AMOUNT - ACID
REGENERATION M28
N
System generated total quantity in pounds of reported
chemical contained in the waste off-site for acid
regeneration (M28). If field number 163 is not blank, its
contents are used as the total. If it is blank, the middle of
the range for the code used in field number 164 is used
for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
54
File Type 6
-------
Mum.
Field Name
Type
Description
BASIS OF ESTIMATE M28
C
A code indicating the principal method by which the
amount sent off-site for acid regeneration (M28)
estimate was calculated. The codes and corresponding
methods are:
Ill
C = mass balance calculations
E = published emission factors
El = published emission factors
E2 = on site-specific emission factors
M = monitoring data
Ml = continuous monitoring data
M2 = periodic/random monitoring data
NA = not applicable
0 = other
X = invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
178
XFERS OFF-SITE POUNDS -
TRANSFER TO WASTE
BROKER-RECYCLING M93
N
An estimate of the total quantity transferred to a waste
broker for recycling (M93). Range codes may be used
for transfers of less than 1000 lbs.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
179
XFERS OFF-SITE RANGE CODE
- TRANSFER TO WASTE
BROKER-RECYCLING M93
C
Code used to indicate the amount of the toxic chemical
transferred to a waste broker for recycling (M93) within
a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
55
File Type 6
-------
Mum.
Field Name
Type
Description
180
TOTAL XFERS OFF-SITE
AMOUNT - TRANSFER TO
WASTE BROKER-RECYCLING
M93
N
System generated total quantity in pounds of reported
chemical contained in the waste transferred to a waste
broker for recycling (M93). If field number 167 is not
blank, its contents are used as the total. If it is blank, the
middle of the range for the code used in field number
168 is used for the total value.
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M93
C
A code indicating the principal method by which the
amount transferred to a waste broker for recycling (M93)
estimate was calculated. The codes and corresponding
methods are:
181
C = mass balance calculations
E = published emission factors
El = published emission factors
E2 = on site-specific emission factors
M = monitoring data
Ml = continuous monitoring data
M2 = periodic/random monitoring data
NA = not applicable
0 = other
X = invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
182
TOTAL AMOUNT
TRANSFERRED OFF-SITE FOR
RECYCLING
N
Total, in pounds, of toxic chemical reported transferred
off-site for recycling. Sum of Columns (153 + 157 +
161 + 165 + 169).
Source: System generated
Reference: None
183
XFERS OFF-SITE RCRA
SUBTITLE C SURFACE
IMPOUNDMENT
POUNDS M66
N
An estimate of the total quantity of a chemical contained
in the waste transferred off-site to a RCRA Subtitle C
surface impoundment (M66). Range codes may be used
for transfers of less than 1000 lbs. Amounts are reported
in grams for Dioxins and pounds for all other chemicals
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
56
File Type 6
-------
Mum.
Field Name
Type
Description
184
RCRA SUBTITLE C SURFACE
IMPOUNDMENT RANGE CODE
M66
C
Code used to indicate the amount of the toxic chemical
transferred off-site for RCRA Subtitle C surface
impoundment (M66) within a range. If none, the
submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
185
RCRA SUBTITLE C SURFACE
IMPOUNDMENT TOTAL
AMOUNT M66
N
System generated total quantity of a chemical contained
in the waste transferred off-site for RCRA Subtitle C
surface impoundment (M66). If field number 172 is not
blank, its contents are used as the total. If it is blank, the
middle of the range for the code used in field number
173 is used for the total value. Amounts are reported in
grams for Dioxins and pounds for all other chemicals
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M66
C
A code indicating the principal method by which the
total RCRA Subtitle C surface impoundment (M66)
estimate was calculated. The codes and corresponding
methods are:
186
C = mass balance calculations
E = published emission factors
El = published emission factors
E2 = on site-specific emission factors
M = monitoring data
Ml = continuous monitoring data
M2 = periodic/random monitoring data
NA = not applicable
0 = other
X = invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
57
File Type 6
-------
Mum.
Field Name
Type
Description
187
XFERS OFF-SITE OTHER
SURFACE IMPOUNDMENT
POUNDS M67
N
An estimate of the total quantity of a chemical contained
in the waste transferred off-site to Other surface
impoundment (M67). Range codes may be used for
transfers of less than 1000 lbs. Amounts are reported in
grams for Dioxins and pounds for all other chemicals
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
188
OTHER SURFACE
IMPOUNDMENT RANGE CODE
M67
C
Code used to indicate the amount of the toxic chemical
transferred off-site for Other surface impoundment
(M67) within a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
189
OTHER SURFACE
IMPOUNDMENT TOTAL
AMOUNT M67
N
System generated total quantity of a chemical contained
in the waste transferred off-site for Other surface
impoundment (M67). If field number 176 is not blank,
its contents are used as the total. If it is blank, the
middle of the range for the code used in field number
177 is used for the total value. Amounts are reported in
grams for Dioxins and pounds for all other chemicals
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
58
File Type 6
-------
Field Name
Mum.
Type
Description
BASIS OF ESTIMATE M67
C
A code indicating the principal method by which the
total other surface impoundment (M67) estimate was
190
calculated.
The codes and corresponding methods are:
C =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
O =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
191
XFERS OFF-SITE
UNDERGROUND INJ. CLASS I
WELLS
POUNDS M81
N
An estimate of the total quantity of a chemical contained
in the waste transferred off-site for underground
injection into class I wells (M81). Range codes may be
used for transfers of less than 1000 lbs. Amounts are
reported in grams for Dioxins and pounds for all other
chemicals
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
UNDERGROUND INJ. CLASS I
WELLS
RANGE CODE M81
C
192
Code used to indicate the amount of the toxic chemical
transferred to off-site underground injection class I wells
(M81) within a range. If none, the submitter enters zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
59
File Type 6
-------
Mum.
Field Name
Type
Description
193
UNDERGROUND INJ. CLASS I
WELLS
TOTAL AMOUNT M81
N
System generated total quantity of a chemical contained
in the waste transferred to off-site underground injection
class I wells (M81). If field number 180 is not blank, its
contents are used as the total. If it is blank, the middle of
the range for the code used in field number 181 is used
for the total value. Amounts are reported in grams for
Dioxins and pounds for all other chemicals
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M81
C
A code indicating the principal method by which the
total underground injection into class I wells (M81)
estimate was calculated. The codes and corresponding
methods are:
194
C = mass balance calculations
E = published emission factors
El = published emission factors
E2 = on site-specific emission factors
M = monitoring data
Ml = continuous monitoring data
M2 = periodic/random monitoring data
NA = not applicable
0 = other
X = invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
195
XFERS OFF-SITE
UNDERGROUND INJ. CLASS II-
V WELLS
POUNDS M82
N
An estimate of the total quantity of a chemical contained
in the waste transferred off-site for underground
injection into class II-V wells (M82). Range codes may
be used for transfers of less than 1000 lbs. Amounts are
reported in grams for Dioxins and pounds for all other
chemicals
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER
Reference: Part II, Section 6.2A
60
File Type 6
-------
Field Name
Mum.
Type
Description
UNDERGROUND INJ. CLASS II-
V WELLS
RANGE CODE M82
C
196
Code used to indicate the amount of the toxic chemical
transferred to off-site underground injection class II-V
wells (M82) within a range. If none, the submitter enters
zero.
A = 1-10
B = 11-499
C = 500-999
Source: TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: Part II, Section 6.2A
UNDERGROUND INJ. CLASS II-
V WELLS
TOTAL AMOUNT M82
N
197
System generated total quantity of a chemical contained
in the waste transferred to off-site underground injection
class I wells (M82). If field number 184 is not blank, its
contents are used as the total. If it is blank, the middle of
the range for the code used in field number 185 is used
for the total value. Amounts are reported in grams for
Dioxins and pounds for all other chemicals
Source: TRI_TRANSFER_QTY.
TOTAL_TRANSFER or TRI_TRANSFER_QTY.
TR AN SFER_R AN GE_C ODE
Reference: NA (system generated)
BASIS OF ESTIMATE M82
C
A code indicating the principal method by which the
total underground injection into class II-V wells (M82)
estimate was calculated. The codes and corresponding
methods are:
198
c =
mass balance calculations
E =
published emission factors
El =
published emission factors
E2 =
on site-specific emission factors
M =
monitoring data
Ml =
continuous monitoring data
M2 =
periodic/random monitoring data
NA =
not applicable
0 =
other
X =
invalid data
Source: TRI_TRANSFER_QTY.
transfer_basis_est_code
Reference: Part II, Section 6.2B
61
File Type 6
-------
Mum.
Field Name
Type
Description
199
ASSIGNED FED. FACILITY
FLAG
C
Code indicating whether the Facility is federal or not.
Assigned by TRI.
Yes = Federal
No = Non-Federal
Source: TRI_FACILITY.ASGN_FEDERAL
200
PUBLIC CONTACT EMAIL
C
Email address of the individual at a TRI facility
(reporter) who the public may contact if clarification of
data is needed.
Source: TRI_REPORTING_FORM.PUBLIC_
CONT ACT_PERSON_EMAIL
Reference: Part I, Section 4.4
201
REVISION CODE 1
c
Code indicating the reason the Facility revised its data.
Values:
RR1 = New Monitoring Data
RR2 = New Emission Factors
RR3 = New Chemical Concentration Data
RR4 = Recalculation(s)
RR5 = Other Reason(s)
Source: TRI_REPORTING_FORM.Revision_Code_l
202
REVISION CODE 2
c
Code indicating the reason the Facility revised its data.
Values:
RR1 = New Monitoring Data
RR2 = New Emission Factors
RR3 = New Chemical Concentration Data
RR4 = Recalculation(s)
RR5 = Other Reason(s)
Source: TRI_REPORTING_FORM.Revision_Code_l
203
METAL_IND
c
Code indicating whether the is a metal or not.
Yes = Metal
No = Non-Metal
Source: TRI_CHEM_INFO.Metal_Ind
62
File Type 6
-------
Appendix A: List of Values
Section 7 A. On-Site Waste Treatment Methods and Efficiency
General Waste Stream
A Gaseous (gases, vapors, airborne particulates)
W Wastewater (aqueous waste)
L Liquid waste streams (non-aqueous waste)
S Solid waste streams (including sludges and slurries)
Waste Treatment Methods (New list for Codes for RY 2006)
Air Emissions Treatment
A01
Flare
A02
Condenser
A03
Scrubber
A04
Absorber
A05
Electrostatic Precipitator
A06
Mechanical Separation
A07
Other Air Emission Treatment
Chemical Treatment
H040 Incineration-thermal destruction other than use as a fuel
H071 Chemical reduction with or without precipitation
H073 Cyanide destruction with or without precipitation
H075 Chemical oxidation
H076 Wet air oxidation
H077 Other chemical precipitation with or without pre-treatment
Biological Treatment
H081 Biological treatment with or without precipitation
Physical Treatment
H082 Adsorption
H083 Air or steam stripping
H101 Sludge treatment and/or dewatering
H103 Absorption
H111 Stabilization or chemical fixation prior to disposal
H112 Macro-encapsulation prior to disposal
H121 Neutralization
H122 Evaporation
H123 Settling or clarification
H124 Phase separation
H129 Other treatment
63
Appendix C
-------
Section 7B. On-Site Energy Recovery Processes
U01 Industrial Kiln
U02 Industrial Furnace
U03 Industrial Boiler
Section 7C. On-Site Recycling Processes
H10 Metal recovery (by retorting, smelting, or chemical or physical extraction)
H20 Solvent recovery (including distillation, evaporation, fractionation or extraction)
H39 Other recovery or reclamation for reuse (including acid regeneration or other chemical reaction
process)
Crosswalk for Section 7 A, Column B. Waste Treatment Method (s) Sequence
Air Emissions Treatment (applicable to gaseous waste streams only)
(No change - same as previous codes)
A01
Flare
A02
Condenser
A03
Scrubber
A04
Absorber
A05
Electrostatic Precipitator
A06
Mechanical Separation
A07
Other Air Emission Treatment
Previous Codes
New Codes (adapted from RCRA Hazardous Waste
Management Codes)
Biological Treatment:
B11
Aerobic
H081
Biological treatment with or without
precipitation
B21
Anaerobic
H081
Biological treatment with or without
precipitation
B31
Facultative
H081
Biological treatment with or without
precipitation
B99
Other Biological Treatment
H081
Biological treatment with or without
precipitation
64
Appendix A
-------
Previous Codes
New Codes (adapted from RCRA Hazardous Waste
Management Codes)
Chemical Treatment:
C01
Chemical Precipitation B Lime or Sodium
Hydroxide
H071
Chemical reduction with or without
precipitation
C02
Chemical Precipitation B Sulfide
H071
Chemical reduction with or without
precipitation
C09
Chemical Precipitation B Other
H077
Other chemical precipitation with or without
pre-treatment
C11
Neutralization
H121
Neutralization
C21
Chromium Reduction
H071
Chemical reduction with or without
precipitation
C31
Complexed Metals Treatment (other than
pH adjustment)
H129
Other treatment
C41
Cyanide Oxidation B Alkaline Chlorination
H073
Cyanide destruction with or without
precipitation
C42
Cyanide Oxidation B Electrochemical
H073
Cyanide destruction with or without
precipitation
C43
Cyanide Oxidation B Other
H073
Cyanide destruction with or without
precipitation
C44
General Oxidation (including Disinfection) B
Chlorination
H075
Chemical oxidation
C45
General Oxidation (including Disinfection) B
Ozonation
H075
Chemical oxidation
C46
General Oxidation (including Disinfection) B
Other
H075
Chemical oxidation
C99
Other Chemical Treatment
H129
Other treatment
Incineration/Thermal Treatment: (Note: Only report combustion for the purposes of incineration/thermal treatment
in Section 7A. If the method involves combustion for the purposes of energy recover, report as U01, U02, or U03
in Section 7B. If the method involves combustion for the purposes of materials recovery, report as H39 in Section
7C.)
F01
Liquid Injection
H040
Incineration B thermal destruction other than
use as a fuel
F11
Rotary Kiln with Liquid Injection Unit
H040
Incineration B thermal destruction other than
use as a fuel
65
Appendix A
-------
F19
Other Rotary Kiln
H040
Incineration B thermal destruction other than
use as a fuel
F31
Two Stage
H040
Incineration B thermal destruction other than
use as a fuel
F41
Fixed Hearth
H040
Incineration B thermal destruction other than
use as a fuel
Previous Codes
New Codes (adapted from RCRA Hazardous Waste
Management Codes)
F42
Multiple Hearth
H040
Incineration B thermal destruction other than
use as a fuel
F51
Fluidized Bed
H040
Incineration B thermal destruction other than
use as a fuel
F61
Infra-Red
H040
Incineration B thermal destruction other than
use as a fuel
F71
Fume/Vapor
H040
Incineration B thermal destruction other than
use as a fuel
F81
Pyro lytic destructor
H040
Incineration B thermal destruction other than
use as a fuel
F82
Wet air oxidation
H076
Wet air oxidation
F83
Thermal Drying/Dewatering
H122
Evaporation
F99
Other Incineration/Thermal Treatment
H040
Incineration B thermal destruction other than
use as a fuel
Physical Treatment:
P01
Equalization
H129
Other treatment
P09
Other blending
H129
other treatment
P11
Settling/clarification
H123
Settling or clarification
P12
Filtration
H123
Settling or clarification
P13
Sludge dewatering (non-thermal)
H101
Sludge treatment and/or dewatering
P14
Air flotation
H124
Phase separation
P15
Oil skimming
H124
Phase separation
P16
Emulsion breaking B thermal
H124
Phase separation
P17
Emulsion breaking B chemical
H124
Phase separation
P18
Emulsion breaking B other
H124
Phase separation
P19
Other liquid phase separation
H124
Phase separation
66
Appendix A
-------
P21
Adsorption B Carbon
H082
Adsorption
P22
Adsorption B Ion exchange (other than for
recovery/reuse)
H082
Adsorption
P23
Adsorption B Resin
H082
Adsorption
P29
Adsorption B Other
H082
Adsorption
P31
Reverse Osmosis (other than for
recover/reuse)
H129
Other treatment
P41
Stripping B Air
H083
Air or steam stripping
P42
Stripping B Steam
H083
Air or steam stripping
Previous Codes
New Codes (adapted from RCRA Hazardous Waste
Management Codes)
P49
Stripping B Other
H083
Air or steam stripping
P51
Acid Leaching (other than for
recovery/reuse)
H129
Other treatment
P61
Solvent Extraction (other than
recovery/reuse)
H129
Other treatment
P99
Other Physical Treatment
H129
Other treatment
Solidification/Stabilization:
G01
Cement processes (including silicates)
H111
Stabilization or chemical fixation prior to
disposal
G09
Other Pozzolonic Processes (including
silicates)
H111
Stabilization or chemical fixation prior to
disposal
G11
Asphaltic Techniques
H111
Stabilization or chemical fixation prior to
disposal
G20
Thermoplastic Techniques
H111
Stabilization or chemical fixation prior to
disposal
G99
Other Solidification Processes
H111
Stabilization or chemical fixation prior to
disposal
67
Appendix A
-------
Appendix B: Chemical Classifications
Category 1 Metals
ANTIMONY
ANTIMONY COMPOUNDS
ARSENIC
ARSENIC COMPOUNDS
BERYLLIUM
BERYLLIUM COMPOUNDS
CADMIUM
CADMIUM COMPOUNDS
CHROMIUM
CHROMIUM COMPOUNDS
(EXCEPT CHROMITE ORE MINED IN THE TRANSVAAL REGION)
COBALT
COBALT COMPOUNDS
COPPER
COPPER COMPOUNDS
LEAD
LEAD COMPOUNDS
MANGANESE
MANGANESE COMPOUNDS
MERCURY
MERCURY COMPOUNDS
NICKEL
NICKEL COMPOUNDS
SELENIUM
SELENIUM COMPOUNDS
SILVER
SILVER COMPOUNDS
THALLIUM
THALLIUM COMPOUNDS
VANADIUM COMPOUNDS
ZINC COMPOUNDS
Category 2 Metals
ALUMINUM OXIDE (fibrous forms)
ALUMINUM PHOSPHIDE
ASBESTOS (FRIABLE)
BIS(TRIBUTYLTIN) OXIDE
BORON TRICHLORIDE
BORON TRIFLUORIDE
C.I. DIRECT BLUE 218
C.I. DIRECT BROWN 95
FENBUTATIN OXIDE
FERBAM
IRON PENTACARBONYL
LITHIUM CARBONATE
MANEB
METIRAM
MOLYBDENUM TRIOXIDE
OSMIUM TETROXIDE
POTASSIUM BROMATE
SODIUM NITRITE
THORIUM DIOXIDE
TITANIUM TETRACHLORIDE
TRIBUTYLTIN FLUORIDE
TRIBUTYLTIN METHACRYLATE
TRIPHENYLTIN CHLORIDE
TRIPHENYLTIN HYDROXIDE
ZINEB
Category 3 Metals
BARIUM
BARIUM COMPOUNDS
Category 4 Metals
ALUMINUM ( fume or dust )
VANADIUM ( EXPEPT WHEN CONTIANED IN AN ALLOY)
ZINC ( FUME OR DUST)
68
Appendix D
------- |