Formaldehyde Emission Standards for Composite Wood Products Final Rule
Frequently Asked Questions — General Consumers

1.	What action is EPA taking today?

EPA is finalizing a rule to help reduce harmful exposures to formaldehyde emitted into the air from
certain composite wood products. This new rule will implement the formaldehyde emission standards
and other provisions required under the Formaldehyde Standards for Composite Wood Products Act,
which added Title VI to the Toxic Substances Control Act (TSCA). The final rule also establishes a third-
party certification program for laboratory testing and oversight of formaldehyde emissions from
manufactured and/or imported composite wood products.

2.	What are composite wood products and what types are covered by the finalrule?

Composite wood products are wood products created by binding strands, particles, fibers, veneers, or
boards of wood together with adhesives (i.e., glues). There are three composite wood products that are
regulated under TSCA Title VI: hardwood plywood, medium-density fiberboard (includes thin-MDF), and
particleboard. These composite wood products are commonly used in the manufacture of furniture,
kitchen cabinets, flooring, picture frames and wooden children's toys, among other products.

3.	What is formaldehyde and how is it used in composite wood products?

Formaldehyde is a colorless, flammable, strong-smelling chemical that is used in resins (i.e., glues) used
in the manufacture of composite wood products (i.e., hardwood plywood, particleboard and medium-
density fiberboard).

4.	What are the health effects of formaldehyde exposure?

Formaldehyde exposure can have a negative effect on health, both in the short and long term.
Formaldehyde can cause irritation of the skin, eyes, nose, and throat. High levels of exposure may cause
some types of cancers.

5.	When do the rule requirements go into effect?

The formaldehyde emission standards go into effect beginning June 1, 2018. By June 1, 2018, and until
March 22, 2019, regulated composite wood panels and finished products containing such composite
wood panels that are manufactured (in the United States) or imported (into the United States) must be
certified as compliant with the TSCA Title VI or the California Air Resources Board (CARB) Airborne Toxic
Control Measures (ATCM) Phase II emission standards, which are set at identical levels, by a third-party
certifier (TPC) approved by CARB and recognized by EPA. All regulated composite wood products, and
finished goods containing composite wood products, manufactured in or imported into the United States
after March 22, 2019 are required to be certified as TSCA Title VI compliant by an EPA TSCA Title VI TPC
with all of the required accreditations.

1


-------
6. Who is subject to the final rule requirements?

Those who sell, supply, offer for sale, manufacture or import composite wood products are subject
to the final rule requirements. This includes manufacturers, importers, fabricators (e.g., furniture
makers) distributors and retailers. Third party certifiers (TPCs) who certify that composite wood
products are compliant with the EPA rule and accreditation bodies who accredit and oversee the TPCs
are also affected by the rule.

7. What are the formaldehyde emissions standards for covered composite wood products?

The formaldehyde emissions standards vary by type of regulated product. In the table below, the
product is aligned with its emissions standard in parts per million (ppm).

Product

Emission Standard

Hardwood Plywood - Veneer Core

0.05 ppm of formaldehyde

Hardwood Plywood - Composite Core

0.05 ppm of formaldehyde

Medium-Density Fiberboard

0.11 ppm of formaldehyde

Thin Medium-Density Fiberboard

0.13 ppm of formaldehyde

Particleboard

0.09 ppm of formaldehyde

8. How does this regulation differ from the CARB regulation?

The formaldehyde emission standards for composite wood products under the EPA final rule, and set by
Congress, are identical to the California "Phase 2" formaldehyde emission standards. EPA worked to
align the other requirements of the federal rule with the California requirements. However, there are a
few differences. Unlike the California requirements, among other things, the EPA rule will: require
records be kept for 3 years versus 2 years, require importers to provide import certification under TSCA
2 years after rule finalization, require manufacturers to disclose upon request formaldehyde testing
results to their direct purchasers and require laminated products not exempted from the definition of
hardwood plywood to meet the hardwood plywood formaldehyde emissions standard seven years after
the final rule is issued.

2


-------
9.	Will compliant wood products be labeled?

Yes. Regulated composite wood products, and finished goods containing composite wood products, are
required to be labeled as CARB ATCM Phase II or TSCA Title VI compliant beginning June 1, 2018. All
regulated composite wood products, and finished goods containing composite wood products,
manufactured in or imported into the United States after March 22, 2019 are required to be labeled as
TSCA Title VI compliant.

Until March 22, 2019, CARB ATCM Phase II compliant composite wood panels are considered TSCA Title
VI compliant, and the CARB ATCM Phase II label will satisfy the TSCA Title VI labeling requirement. All
composite wood panels manufactured in or imported into the United States after March 22, 2019 must
be TSCA title VI compliant and the label on composite wood panels must include the panel producer's
name, lot number, an EPA-recognized TSCA Title VI Third-Party Certifier number, and a TSCA Title VI
compliance statement.

Until March 22, 2019, the CARB Phase II label on finished goods will satisfy the TSCA Title VI labeling
requirements. The labels on finished goods produced in or imported into the United States after March
22, 2019 must include the fabricator's name, the date the finished good was produced (in month/year
format), and a TSCA Title VI compliance statement.

10.	How does EPA ensure that composite wood products do not exceed the emission standards?

EPA established a third-party certification program for laboratory testing and oversight of formaldehyde
emissions from manufactured and/or imported regulated composite wood products. This helps to
ensure only composite wood products compliant with the formaldehyde emission standards enter the
supply chain.

3


-------