National Service Center for Environmental Publications (NSCEP)

Document Display

Initiate a new search within the currently selected document

Include current hits

Find additional information on this topic!

Describe the error you saw:
E-mail Address	(Highly Recommended)
		When you have finished entering your information, click the Submit Error button.

Page 211 of 211

No next page with hits, showing the end of the document.

_Federal Facilities Enforcement Office reconnaissance with sampling, reconnaissance without sampling, sampling, and toxics. This differs from FY06, which included all inspections. Key: CFA = Civilian Federal Agencies DOD = Department of Defense DOE = Department of Energy Other = Federal agency other than CFA, DOD, and DOE CAA Inspections For FY07, the number of CAA inspections reflects the number of full compliance evaluations. This differs from FY06, which counted the number of CAA inspections by program type at a facility (e.g., MACT, Title V, SIP) within each full compliance evaluation. Source: EPA's Integrated Database for Enforcement Analysis (IDEA), March 2008 refresh. Notes: 1. All facilities are included when there was an inspection. This includes non-federally reportable facilities. It should be noted that information on non-federally reportable facilities could be limited as states are not required to report such information to EPA. This method differs from FY06, which considered inspection activity only at active federally reportable facilities. 2. For FY07, a federal facility was included based on flags contained within the legacy systems (e.g., AFS, RCRA) and FRS. This differs from FY06, where a federal facility was included based on flags contained within the legacy systems alone. It should be noted that some records within these tables may not actually comport to "Federal Facilities". They represent facilities flagged as federal by EPA Regions. Due to practical considerations FFEO's quality review did not extend itself to certifying individual records as representing "Federal Facilities". 3. Included EPA and state inspections under CAA are as follows: EPA conducted FCE/On-Site (FE), EPA conducted FCE/Off-Site (FZ), State conducted FCE/On-Site (FS), State conducted FCE/Off-Site (FF). Key: CFA = Civilian Federal Agencies DOD = Department of Defense DOE = Department of Energy Other = Federal agency other than CFA, DOD, and DOE 207 image:

A Newer Version

is available

Click to dismiss this advisory.

You are now in HELP mode. Click on any control for information on what that control does.

Click in any text box to dismiss it from view. -- Click the Question Mark again to return to normal operation.

Selecting this entry will take you to a page where you can search this site for other documents you might need.

Selecting this entry will take you to the Advanced search page. This provides more control over what documents will be selected, how many results are returned, how the search will be carried out and numerous other features.

Selecting this entry will take you to the Fields search page. This will let you emphasize the importance of the selected field query rather than the usual full text search.

This will link you to a series of pages that represent a catalog of the full content of the repository. Some prefer this method when searching titles as it permits the use of the browsers search capability. These pages can be rather large.

This is the button that takes you to the previous page of the current document (or the previous sequence of pages if there are multiple pages of context selected)

This entry location shows the current page number (or first page of the group of pages currently loaded) and provides the opportunity to jump to any page in the current document. Just enter the page number here...

This entry location shows the number of pages to be loaded for display at one time. The default is 1 but is user selectable up to 20. The number of pages can be selected by moving the bottom slider until it reflects the desired quantity or enter the page number here...

The number of pages loaded will also be displayed in the upper right of the window.

This is the button that takes you to the previous page of the current document (or the previous sequence of pages if there are multiple pages of context selected)

This button finds your current search term(s) in the first page prior to this one and displays that page with all search terms on the page highlighted

This button is used to select the document preceding the current one in the results list. If there is another document in the results list before this one, the first page of that document will be displayed, if not, the first page of this document will be displayed.

This button will cause the image displayed to be enlarged, when possible.

This button will cause the image displayed to be reduced in size, when possible.

This is the button that takes you to the next page of the current document (or the next sequence of pages if there are multiple pages of context selected)

This button finds your current search term(s) in the first page following this one and displays that page with all search terms on the page highlighted

This button is used to select the document following the current one in the results list. If there is another document in the results list after this one, the first page of that document will be displayed, if not, the first page of this document will be displayed.

By selecting one of the entries associated with this countrol you can select the number of pages of context to be displayed. Once selected, each step through the document will advance by this number of pages

Entering a value here and clicking the button or pressing enter will display the page at the page count entered

This tool will use the content of the current document to create another search to try to locate additional documents that address the same topics as this one. Note: When the results list is generated in response to this control, the terms selected will appear at the top of the list. If the results list is too small, try copying the terms for a new search but eliminate any that seem too restrictive. To further restrict a large results list, try using the Search Cloud feature available in the results list display.

This will take you to the current results list. If you have changed your search terms using the "Search in document" feature, your results list may be different than the one that got you here!

The NEPIS system will provide the current document packaged as a Multipage TIFF in a new window. This format can be useful if you have Microsoft's document imaging, as that application can OCR the document delivered, making it searchable without using the NEPIS system.

The NEPIS system will provide the current document packaged as a PDF in a new window. Some PDFs are documents that were created in that format, others were created from the scanned images you see displayed online. Of this later type, some have been created in advance to expedite delivery, others are created at the time they are requested. If the one you request fits this last category, please be patient, as it may take several minutes for our servers to collect, package, format, and deliver the resulting document. The larger the document (either because of a large number of pages or color content) the longer the delivery time.

The NEPIS system will provide the full text of the document as seen by our OCR engine. Sometimes useful if you wish to access the text for 'cut and paste' references.

This control toggles the display of addtional metadata associated with each document. Click this to display information describing such things as publication number, document title, and etc., then again to remove that information from the display

This selection will save a link to this document in your document basket. You may use this to avoid searching for the document again in the future or, if available in hardcopy, you can use that entry to order the publication (all EPA Publications are free of charge)

By selecting this checkbox, keep the search terms already highlighted and simply add the new entry to the list.

This feature allows you change the focus of your search by selecting a new search term to be found in this document.

This feature allows you to alert EPA to a problem with the document or page you are viewing. Whenever posible, document images or structure will be repaired in response to these reports.

Entering your e-mail address ensures that we will be able to address the defect you found. It also allows us to notify you as to when and how the corrected document can be obtained.